| 1 | !> @file parin.f90 |
|---|
| 2 | !--------------------------------------------------------------------------------------------------! |
|---|
| 3 | ! This file is part of the PALM model system. |
|---|
| 4 | ! |
|---|
| 5 | ! PALM is free software: you can redistribute it and/or modify it under the terms of the GNU General |
|---|
| 6 | ! Public License as published by the Free Software Foundation, either version 3 of the License, or |
|---|
| 7 | ! (at your option) any later version. |
|---|
| 8 | ! |
|---|
| 9 | ! PALM is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the |
|---|
| 10 | ! implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General |
|---|
| 11 | ! Public License for more details. |
|---|
| 12 | ! |
|---|
| 13 | ! You should have received a copy of the GNU General Public License along with PALM. If not, see |
|---|
| 14 | ! <http://www.gnu.org/licenses/>. |
|---|
| 15 | ! |
|---|
| 16 | ! Copyright 1997-2021 Leibniz Universitaet Hannover |
|---|
| 17 | !--------------------------------------------------------------------------------------------------! |
|---|
| 18 | ! |
|---|
| 19 | ! Current revisions: |
|---|
| 20 | ! ----------------- |
|---|
| 21 | ! |
|---|
| 22 | ! |
|---|
| 23 | ! Former revisions: |
|---|
| 24 | ! ----------------- |
|---|
| 25 | ! $Id: parin.f90 4872 2021-02-12 15:49:02Z gronemeier $ |
|---|
| 26 | ! internal switch removed from namelist |
|---|
| 27 | ! |
|---|
| 28 | ! 4845 2021-01-18 11:15:37Z raasch |
|---|
| 29 | ! -use_cmax |
|---|
| 30 | ! |
|---|
| 31 | ! 4842 2021-01-14 10:42:28Z raasch |
|---|
| 32 | ! reading of namelist file and actions in case of namelist errors revised so that statement labels |
|---|
| 33 | ! and goto statements are not required any more, |
|---|
| 34 | ! deprecated namelists removed |
|---|
| 35 | ! |
|---|
| 36 | ! 4828 2021-01-05 11:21:41Z Giersch |
|---|
| 37 | ! file re-formatted to follow the PALM coding standard |
|---|
| 38 | ! |
|---|
| 39 | ! 4783 2020-11-13 13:58:45Z raasch |
|---|
| 40 | ! bugfix for reading restart data with MPI-I/O (does not work with blockwise I/O) |
|---|
| 41 | ! |
|---|
| 42 | ! 4680 2020-09-16 10:20:34Z gronemeier |
|---|
| 43 | ! Add option to fix date or time of the simulation |
|---|
| 44 | ! |
|---|
| 45 | ! 4565 2020-06-15 08:30:38Z oliver.maas |
|---|
| 46 | ! added pt_surface_heating_rate |
|---|
| 47 | ! |
|---|
| 48 | ! 4564 2020-06-12 14:03:36Z raasch |
|---|
| 49 | ! Vertical nesting method of Huq et al. (2019) removed |
|---|
| 50 | ! |
|---|
| 51 | ! 4536 2020-05-17 17:24:13Z raasch |
|---|
| 52 | ! bugfix for restart data format query |
|---|
| 53 | ! |
|---|
| 54 | ! 4505 2020-04-20 15:37:15Z schwenkel |
|---|
| 55 | ! Add flag for saturation check |
|---|
| 56 | ! |
|---|
| 57 | ! 4495 2020-04-13 20:11:20Z raasch |
|---|
| 58 | ! restart data handling with MPI-IO added |
|---|
| 59 | ! |
|---|
| 60 | ! 4360 2020-01-07 11:25:50Z suehring |
|---|
| 61 | ! removed recycling_yshift |
|---|
| 62 | ! |
|---|
| 63 | ! 4227 2019-09-10 18:04:34Z gronemeier |
|---|
| 64 | ! implement new palm_date_time_mod |
|---|
| 65 | ! |
|---|
| 66 | ! 4146 2019-08-07 07:47:36Z gronemeier |
|---|
| 67 | ! added rotation_angle to initialization_parameters |
|---|
| 68 | ! |
|---|
| 69 | ! 4191 2019-08-27 15:45:07Z gronemeier |
|---|
| 70 | ! bugfix: add recycling_method_for_thermodynamic_quantities to inipar namelist |
|---|
| 71 | ! |
|---|
| 72 | ! 4183 2019-08-23 07:33:16Z oliver.maas |
|---|
| 73 | ! replaced recycle_absolute_quantities by recycling_method_for_thermodynamic_quantities |
|---|
| 74 | ! |
|---|
| 75 | ! 4182 2019-08-22 15:20:23Z scharf |
|---|
| 76 | ! Corrected "Former revisions" section |
|---|
| 77 | ! |
|---|
| 78 | ! 4176 2019-08-20 14:10:41Z oliver.maas |
|---|
| 79 | ! added recycle_absolute_quantities to initialization_parameters namelist |
|---|
| 80 | ! |
|---|
| 81 | ! 4173 2019-08-20 12:04:06Z gronemeier |
|---|
| 82 | ! add vdi_internal_controls |
|---|
| 83 | ! |
|---|
| 84 | ! 4131 2019-08-02 11:06:18Z monakurppa |
|---|
| 85 | ! Allocate hom and hom_sum to allow profile output for salsa variables. |
|---|
| 86 | ! |
|---|
| 87 | ! 4079 2019-07-09 18:04:41Z suehring |
|---|
| 88 | ! +monotonic_limiter_z |
|---|
| 89 | ! |
|---|
| 90 | ! 4022 2019-06-12 11:52:39Z suehring |
|---|
| 91 | ! Change default top boundary condition for pressure to Neumann in offline nesting case |
|---|
| 92 | ! |
|---|
| 93 | ! 4017 2019-06-06 12:16:46Z schwenkel |
|---|
| 94 | ! Introduce alternative switch for debug output during timestepping |
|---|
| 95 | ! |
|---|
| 96 | ! 3885 2019-04-11 11:29:34Z kanani |
|---|
| 97 | ! Changes related to global restructuring of location messages and introduction of additional debug |
|---|
| 98 | ! messages |
|---|
| 99 | ! |
|---|
| 100 | ! 3806 2019-03-21 12:45:50Z raasch |
|---|
| 101 | ! additional check for lateral boundary conditions added |
|---|
| 102 | ! |
|---|
| 103 | ! 3747 2019-02-16 15:15:23Z gronemeier |
|---|
| 104 | ! removed setting of parameter region |
|---|
| 105 | ! |
|---|
| 106 | ! 3746 2019-02-16 12:41:27Z gronemeier |
|---|
| 107 | ! Removed most_method |
|---|
| 108 | ! |
|---|
| 109 | ! 3649 2019-01-02 16:52:21Z suehring |
|---|
| 110 | ! Delete debug-print statements |
|---|
| 111 | ! |
|---|
| 112 | ! Revision 1.1 1997/07/24 11:22:50 raasch |
|---|
| 113 | ! Initial revision |
|---|
| 114 | ! |
|---|
| 115 | ! |
|---|
| 116 | ! Description: |
|---|
| 117 | ! ------------ |
|---|
| 118 | !> This subroutine reads variables controling the run from the NAMELIST files |
|---|
| 119 | !> |
|---|
| 120 | !> @todo: Revise max_pr_cs (profiles for chemistry) |
|---|
| 121 | !--------------------------------------------------------------------------------------------------! |
|---|
| 122 | SUBROUTINE parin |
|---|
| 123 | |
|---|
| 124 | |
|---|
| 125 | USE arrays_3d, & |
|---|
| 126 | ONLY: pt_init, q_init, ref_state, s_init, sa_init, ug, u_init, v_init, vg |
|---|
| 127 | |
|---|
| 128 | USE chem_modules |
|---|
| 129 | |
|---|
| 130 | USE control_parameters |
|---|
| 131 | |
|---|
| 132 | USE cpulog, & |
|---|
| 133 | ONLY: cpu_log_barrierwait |
|---|
| 134 | |
|---|
| 135 | USE grid_variables, & |
|---|
| 136 | ONLY: dx, dy |
|---|
| 137 | |
|---|
| 138 | USE indices, & |
|---|
| 139 | ONLY: nx, ny, nz |
|---|
| 140 | |
|---|
| 141 | USE kinds |
|---|
| 142 | |
|---|
| 143 | USE model_1d_mod, & |
|---|
| 144 | ONLY: damp_level_1d, dt_pr_1d, dt_run_control_1d, end_time_1d |
|---|
| 145 | |
|---|
| 146 | USE module_interface, & |
|---|
| 147 | ONLY: module_interface_parin |
|---|
| 148 | |
|---|
| 149 | USE netcdf_interface, & |
|---|
| 150 | ONLY: netcdf_data_format, netcdf_deflate, netcdf_precision |
|---|
| 151 | |
|---|
| 152 | USE pegrid |
|---|
| 153 | |
|---|
| 154 | USE pmc_interface, & |
|---|
| 155 | ONLY: nested_run, nesting_mode |
|---|
| 156 | |
|---|
| 157 | USE profil_parameter, & |
|---|
| 158 | ONLY: cross_profiles, profile_columns, profile_rows |
|---|
| 159 | |
|---|
| 160 | USE progress_bar, & |
|---|
| 161 | ONLY : progress_bar_disabled |
|---|
| 162 | |
|---|
| 163 | USE read_restart_data_mod, & |
|---|
| 164 | ONLY: rrd_global |
|---|
| 165 | |
|---|
| 166 | USE statistics, & |
|---|
| 167 | ONLY: hom, hom_sum, pr_palm, statistic_regions |
|---|
| 168 | |
|---|
| 169 | USE turbulence_closure_mod, & |
|---|
| 170 | ONLY: rans_const_c, rans_const_sigma |
|---|
| 171 | |
|---|
| 172 | |
|---|
| 173 | IMPLICIT NONE |
|---|
| 174 | |
|---|
| 175 | CHARACTER(LEN=100) :: line !< dummy string that contains the current line of the parameter |
|---|
| 176 | !< file |
|---|
| 177 | |
|---|
| 178 | INTEGER(iwp) :: global_id !< process id with respect to MPI_COMM_WORLD |
|---|
| 179 | INTEGER(iwp) :: global_procs !< # of procs with respect to MPI_COMM_WORLD |
|---|
| 180 | INTEGER(iwp) :: i !< |
|---|
| 181 | INTEGER(iwp) :: io_status !< status after reading the namelist files |
|---|
| 182 | |
|---|
| 183 | |
|---|
| 184 | NAMELIST /initialization_parameters/ alpha_surface, & |
|---|
| 185 | approximation, & |
|---|
| 186 | bc_e_b, & |
|---|
| 187 | bc_lr, & |
|---|
| 188 | bc_ns, & |
|---|
| 189 | bc_p_b, & |
|---|
| 190 | bc_p_t, & |
|---|
| 191 | bc_pt_b, & |
|---|
| 192 | bc_pt_t, & |
|---|
| 193 | bc_q_b, & |
|---|
| 194 | bc_q_t, & |
|---|
| 195 | bc_s_b, & |
|---|
| 196 | bc_s_t, & |
|---|
| 197 | bc_uv_b, & |
|---|
| 198 | bc_uv_t, & |
|---|
| 199 | building_height, & |
|---|
| 200 | building_length_x, & |
|---|
| 201 | building_length_y, & |
|---|
| 202 | building_wall_left, & |
|---|
| 203 | building_wall_south, & |
|---|
| 204 | calc_soil_moisture_during_spinup, & |
|---|
| 205 | call_psolver_at_all_substeps, & |
|---|
| 206 | canyon_height, & |
|---|
| 207 | canyon_wall_left, & |
|---|
| 208 | canyon_wall_south, & |
|---|
| 209 | canyon_width_x, & |
|---|
| 210 | canyon_width_y, & |
|---|
| 211 | cfl_factor, & |
|---|
| 212 | check_realistic_q, & |
|---|
| 213 | cloud_droplets, & |
|---|
| 214 | collective_wait, & |
|---|
| 215 | complex_terrain, & |
|---|
| 216 | conserve_volume_flow, & |
|---|
| 217 | conserve_volume_flow_mode, & |
|---|
| 218 | constant_flux_layer, & |
|---|
| 219 | coupling_start_time, & |
|---|
| 220 | cycle_mg, & |
|---|
| 221 | damp_level_1d, & |
|---|
| 222 | data_output_during_spinup, & |
|---|
| 223 | dissipation_1d, & |
|---|
| 224 | dp_external, & |
|---|
| 225 | dp_level_b, & |
|---|
| 226 | dp_smooth, dpdxy, & |
|---|
| 227 | dt, & |
|---|
| 228 | dt_pr_1d, & |
|---|
| 229 | dt_run_control_1d, & |
|---|
| 230 | dt_spinup, & |
|---|
| 231 | dx, & |
|---|
| 232 | dy, & |
|---|
| 233 | dz, & |
|---|
| 234 | dz_max, & |
|---|
| 235 | dz_stretch_factor, & |
|---|
| 236 | dz_stretch_level, & |
|---|
| 237 | dz_stretch_level_start, & |
|---|
| 238 | dz_stretch_level_end, & |
|---|
| 239 | e_init, & |
|---|
| 240 | e_min, & |
|---|
| 241 | end_time_1d, & |
|---|
| 242 | ensemble_member_nr, & |
|---|
| 243 | fft_method, & |
|---|
| 244 | flux_input_mode, & |
|---|
| 245 | flux_output_mode, & |
|---|
| 246 | galilei_transformation, & |
|---|
| 247 | humidity, & |
|---|
| 248 | inflow_damping_height, & |
|---|
| 249 | inflow_damping_width, & |
|---|
| 250 | inflow_disturbance_begin, & |
|---|
| 251 | inflow_disturbance_end, & |
|---|
| 252 | initializing_actions, & |
|---|
| 253 | km_constant, & |
|---|
| 254 | large_scale_forcing, & |
|---|
| 255 | large_scale_subsidence, & |
|---|
| 256 | latitude, & |
|---|
| 257 | longitude, & |
|---|
| 258 | loop_optimization, & |
|---|
| 259 | lsf_exception, & |
|---|
| 260 | masking_method, & |
|---|
| 261 | mg_cycles, & |
|---|
| 262 | mg_switch_to_pe0_level, & |
|---|
| 263 | mixing_length_1d, & |
|---|
| 264 | momentum_advec, & |
|---|
| 265 | monotonic_limiter_z, & |
|---|
| 266 | netcdf_precision, & |
|---|
| 267 | neutral, & |
|---|
| 268 | ngsrb, & |
|---|
| 269 | nsor, & |
|---|
| 270 | nsor_ini, & |
|---|
| 271 | nudging, & |
|---|
| 272 | nx, & |
|---|
| 273 | ny, & |
|---|
| 274 | nz, & |
|---|
| 275 | omega, & |
|---|
| 276 | omega_sor, & |
|---|
| 277 | origin_date_time, & |
|---|
| 278 | outflow_source_plane, & |
|---|
| 279 | passive_scalar, & |
|---|
| 280 | prandtl_number, & |
|---|
| 281 | psolver, & |
|---|
| 282 | pt_damping_factor, & |
|---|
| 283 | pt_damping_width, & |
|---|
| 284 | pt_reference, pt_surface, & |
|---|
| 285 | pt_surface_heating_rate, & |
|---|
| 286 | pt_surface_initial_change, & |
|---|
| 287 | pt_vertical_gradient, & |
|---|
| 288 | pt_vertical_gradient_level, & |
|---|
| 289 | q_surface, & |
|---|
| 290 | q_surface_initial_change, & |
|---|
| 291 | q_vertical_gradient, & |
|---|
| 292 | q_vertical_gradient_level, & |
|---|
| 293 | random_generator, & |
|---|
| 294 | random_heatflux, & |
|---|
| 295 | rans_const_c, & |
|---|
| 296 | rans_const_sigma, & |
|---|
| 297 | rayleigh_damping_factor, & |
|---|
| 298 | rayleigh_damping_height, & |
|---|
| 299 | recycling_method_for_thermodynamic_quantities, & |
|---|
| 300 | recycling_width, & |
|---|
| 301 | reference_state, & |
|---|
| 302 | residual_limit, & |
|---|
| 303 | restart_data_format, & |
|---|
| 304 | restart_data_format_input, & |
|---|
| 305 | restart_data_format_output, & |
|---|
| 306 | rotation_angle, & |
|---|
| 307 | roughness_length, & |
|---|
| 308 | s_surface, & |
|---|
| 309 | s_surface_initial_change, & |
|---|
| 310 | s_vertical_gradient, & |
|---|
| 311 | s_vertical_gradient_level, & |
|---|
| 312 | scalar_advec, & |
|---|
| 313 | scalar_rayleigh_damping, & |
|---|
| 314 | spinup_time, & |
|---|
| 315 | spinup_pt_amplitude, & |
|---|
| 316 | spinup_pt_mean, & |
|---|
| 317 | statistic_regions, & |
|---|
| 318 | subs_vertical_gradient, & |
|---|
| 319 | subs_vertical_gradient_level, & |
|---|
| 320 | surface_heatflux, & |
|---|
| 321 | surface_pressure, & |
|---|
| 322 | surface_scalarflux, & |
|---|
| 323 | surface_waterflux, & |
|---|
| 324 | timestep_scheme, & |
|---|
| 325 | topography, & |
|---|
| 326 | topography_grid_convention, & |
|---|
| 327 | top_heatflux, & |
|---|
| 328 | top_momentumflux_u, & |
|---|
| 329 | top_momentumflux_v, & |
|---|
| 330 | top_scalarflux, & |
|---|
| 331 | transpose_compute_overlap, & |
|---|
| 332 | tunnel_height, & |
|---|
| 333 | tunnel_length, & |
|---|
| 334 | tunnel_wall_depth, & |
|---|
| 335 | tunnel_width_x, & |
|---|
| 336 | tunnel_width_y, & |
|---|
| 337 | turbulence_closure, & |
|---|
| 338 | turbulent_inflow, & |
|---|
| 339 | turbulent_outflow, & |
|---|
| 340 | u_bulk, & |
|---|
| 341 | u_profile, & |
|---|
| 342 | ug_surface, & |
|---|
| 343 | ug_vertical_gradient, & |
|---|
| 344 | ug_vertical_gradient_level, & |
|---|
| 345 | use_fixed_date, & |
|---|
| 346 | use_fixed_time, & |
|---|
| 347 | use_free_convection_scaling, & |
|---|
| 348 | use_ug_for_galilei_tr, & |
|---|
| 349 | use_subsidence_tendencies, & |
|---|
| 350 | use_surface_fluxes, & |
|---|
| 351 | use_top_fluxes, & |
|---|
| 352 | use_upstream_for_tke, & |
|---|
| 353 | uv_heights, & |
|---|
| 354 | v_bulk, & |
|---|
| 355 | v_profile, & |
|---|
| 356 | vdi_checks, & |
|---|
| 357 | vg_surface, & |
|---|
| 358 | vg_vertical_gradient, & |
|---|
| 359 | vg_vertical_gradient_level, & |
|---|
| 360 | wall_adjustment, & |
|---|
| 361 | wall_heatflux, & |
|---|
| 362 | wall_humidityflux, & |
|---|
| 363 | wall_scalarflux, & |
|---|
| 364 | y_shift, & |
|---|
| 365 | zeta_max, & |
|---|
| 366 | zeta_min, & |
|---|
| 367 | z0h_factor |
|---|
| 368 | |
|---|
| 369 | NAMELIST /runtime_parameters/ averaging_interval, & |
|---|
| 370 | averaging_interval_pr, & |
|---|
| 371 | cpu_log_barrierwait, & |
|---|
| 372 | create_disturbances, & |
|---|
| 373 | cross_profiles, & |
|---|
| 374 | data_output, & |
|---|
| 375 | data_output_2d_on_each_pe, & |
|---|
| 376 | data_output_masks, & |
|---|
| 377 | data_output_pr, & |
|---|
| 378 | debug_output, & |
|---|
| 379 | debug_output_timestep, & |
|---|
| 380 | disturbance_amplitude, & |
|---|
| 381 | disturbance_energy_limit, & |
|---|
| 382 | disturbance_level_b, & |
|---|
| 383 | disturbance_level_t, & |
|---|
| 384 | do2d_at_begin, & |
|---|
| 385 | do3d_at_begin, & |
|---|
| 386 | dt, & |
|---|
| 387 | dt_averaging_input, & |
|---|
| 388 | dt_averaging_input_pr, & |
|---|
| 389 | dt_coupling, & |
|---|
| 390 | dt_data_output, & |
|---|
| 391 | dt_data_output_av, & |
|---|
| 392 | dt_disturb, & |
|---|
| 393 | dt_domask, & |
|---|
| 394 | dt_dopr, & |
|---|
| 395 | dt_dopr_listing, & |
|---|
| 396 | dt_dots, & |
|---|
| 397 | dt_do2d_xy, & |
|---|
| 398 | dt_do2d_xz, & |
|---|
| 399 | dt_do2d_yz, & |
|---|
| 400 | dt_do3d, & |
|---|
| 401 | dt_max, & |
|---|
| 402 | dt_restart, & |
|---|
| 403 | dt_run_control, & |
|---|
| 404 | end_time, & |
|---|
| 405 | force_print_header, & |
|---|
| 406 | mask_k_over_surface, & |
|---|
| 407 | mask_scale_x, & |
|---|
| 408 | mask_scale_y, & |
|---|
| 409 | mask_scale_z, & |
|---|
| 410 | mask_x, & |
|---|
| 411 | mask_y, & |
|---|
| 412 | mask_z, & |
|---|
| 413 | mask_x_loop, & |
|---|
| 414 | mask_y_loop, & |
|---|
| 415 | mask_z_loop, & |
|---|
| 416 | netcdf_data_format, & |
|---|
| 417 | netcdf_deflate, & |
|---|
| 418 | normalizing_region, & |
|---|
| 419 | npex, & |
|---|
| 420 | npey, & |
|---|
| 421 | nz_do3d, & |
|---|
| 422 | profile_columns, & |
|---|
| 423 | profile_rows, & |
|---|
| 424 | restart_time, & |
|---|
| 425 | section_xy, & |
|---|
| 426 | section_xz, & |
|---|
| 427 | section_yz, & |
|---|
| 428 | restart_data_format, & |
|---|
| 429 | restart_data_format_input, & |
|---|
| 430 | restart_data_format_output, & |
|---|
| 431 | skip_time_data_output, & |
|---|
| 432 | skip_time_data_output_av, & |
|---|
| 433 | skip_time_dopr, & |
|---|
| 434 | skip_time_do2d_xy, & |
|---|
| 435 | skip_time_do2d_xz, & |
|---|
| 436 | skip_time_do2d_yz, & |
|---|
| 437 | skip_time_do3d, & |
|---|
| 438 | skip_time_domask, & |
|---|
| 439 | synchronous_exchange, & |
|---|
| 440 | termination_time_needed |
|---|
| 441 | |
|---|
| 442 | NAMELIST /envpar/ host, & |
|---|
| 443 | maximum_cpu_time_allowed, & |
|---|
| 444 | maximum_parallel_io_streams, & |
|---|
| 445 | progress_bar_disabled, & |
|---|
| 446 | read_svf, & |
|---|
| 447 | revision, & |
|---|
| 448 | run_identifier, & |
|---|
| 449 | tasks_per_node, & |
|---|
| 450 | write_binary, & |
|---|
| 451 | write_svf |
|---|
| 452 | |
|---|
| 453 | ! |
|---|
| 454 | !-- First read values of environment variables (this NAMELIST file is generated by palmrun) |
|---|
| 455 | CALL location_message( 'reading environment parameters from ENVPAR', 'start' ) |
|---|
| 456 | |
|---|
| 457 | OPEN( 90, FILE='ENVPAR', STATUS='OLD', FORM='FORMATTED', IOSTAT=io_status ) |
|---|
| 458 | |
|---|
| 459 | IF ( io_status /= 0 ) THEN |
|---|
| 460 | message_string = 'local file ENVPAR not found' // & |
|---|
| 461 | '&some variables for steering may not be properly set' |
|---|
| 462 | CALL message( 'parin', 'PA0276', 0, 1, 0, 6, 0 ) |
|---|
| 463 | ELSE |
|---|
| 464 | READ( 90, envpar, IOSTAT=io_status ) |
|---|
| 465 | IF ( io_status < 0 ) THEN |
|---|
| 466 | message_string = 'no envpar-NAMELIST found in local file ' // & |
|---|
| 467 | 'ENVPAR& or some variables for steering may not be properly set' |
|---|
| 468 | CALL message( 'parin', 'PA0278', 0, 1, 0, 6, 0 ) |
|---|
| 469 | ELSEIF ( io_status > 0 ) THEN |
|---|
| 470 | message_string = 'errors in local file ENVPAR' // & |
|---|
| 471 | '&some variables for steering may not be properly set' |
|---|
| 472 | CALL message( 'parin', 'PA0277', 0, 1, 0, 6, 0 ) |
|---|
| 473 | ENDIF |
|---|
| 474 | CLOSE( 90 ) |
|---|
| 475 | ENDIF |
|---|
| 476 | |
|---|
| 477 | CALL location_message( 'reading environment parameters from ENVPAR', 'finished' ) |
|---|
| 478 | |
|---|
| 479 | CALL location_message( 'reading NAMELIST parameters from PARIN', 'start' ) |
|---|
| 480 | |
|---|
| 481 | ! |
|---|
| 482 | !-- Open the NAMELIST-file which is send with this job |
|---|
| 483 | CALL check_open( 11 ) |
|---|
| 484 | |
|---|
| 485 | ! |
|---|
| 486 | !-- Read the control parameters for initialization. |
|---|
| 487 | !-- The namelist "initialisation_parameters" must be provided in the NAMELIST-file. |
|---|
| 488 | READ( 11, initialization_parameters, IOSTAT=io_status ) |
|---|
| 489 | |
|---|
| 490 | ! |
|---|
| 491 | !-- Action depending on the READ status |
|---|
| 492 | IF ( io_status > 0 ) THEN |
|---|
| 493 | ! |
|---|
| 494 | !-- initialisation_parameters namelist was found but countained errors. Print an error message |
|---|
| 495 | !- including the line that caused the problem. |
|---|
| 496 | BACKSPACE( 11 ) |
|---|
| 497 | READ( 11 , '(A)' ) line |
|---|
| 498 | CALL parin_fail_message( 'initialization_parameters', line ) |
|---|
| 499 | |
|---|
| 500 | ELSEIF ( io_status < 0 ) THEN |
|---|
| 501 | ! |
|---|
| 502 | !-- initialisation_parametes namelist was not found. Return a message. |
|---|
| 503 | message_string = 'no initialization_parameters-namelist found' |
|---|
| 504 | CALL message( 'parin', 'PA0272', 1, 2, 0, 6, 0 ) |
|---|
| 505 | |
|---|
| 506 | ENDIF |
|---|
| 507 | ! |
|---|
| 508 | !-- Try to read runtime parameters given by the user for this run (namelist "runtime_parameters"). |
|---|
| 509 | !-- The namelist "runtime_parmeters" can be omitted. In that case default values are used for the |
|---|
| 510 | !-- parameters. |
|---|
| 511 | REWIND( 11 ) |
|---|
| 512 | READ( 11, runtime_parameters, IOSTAT=io_status ) |
|---|
| 513 | |
|---|
| 514 | IF ( io_status > 0 ) THEN |
|---|
| 515 | ! |
|---|
| 516 | !-- Namelist runtime_parameters was found but contained errors. Print an error message including |
|---|
| 517 | !-- the line that caused the problem. |
|---|
| 518 | BACKSPACE( 11 ) |
|---|
| 519 | READ( 11 , '(A)') line |
|---|
| 520 | CALL parin_fail_message( 'runtime_parameters', line ) |
|---|
| 521 | |
|---|
| 522 | ENDIF |
|---|
| 523 | |
|---|
| 524 | ! |
|---|
| 525 | !-- Check for module namelists and read them |
|---|
| 526 | CALL module_interface_parin |
|---|
| 527 | |
|---|
| 528 | ! |
|---|
| 529 | !-- Calculate the number of groups into which parallel I/O is split. |
|---|
| 530 | !-- The default for files which are opened by all PEs (or where each PE opens its own independent |
|---|
| 531 | !-- file) is, that all PEs are doing input/output in parallel at the same time. This might cause |
|---|
| 532 | !-- performance or even more severe problems depending on the configuration of the underlying file |
|---|
| 533 | !-- system. |
|---|
| 534 | !-- Calculation of the number of blocks and the I/O group must be based on all PEs involved in this |
|---|
| 535 | !-- run. Since myid and numprocs are related to the comm2d communicator, which gives only a subset |
|---|
| 536 | !-- of all PEs in case of nested runs, that information must be inquired again from the global |
|---|
| 537 | !-- communicator. |
|---|
| 538 | !-- First, set the default: |
|---|
| 539 | #if defined( __parallel ) |
|---|
| 540 | CALL MPI_COMM_RANK( MPI_COMM_WORLD, global_id, ierr ) |
|---|
| 541 | CALL MPI_COMM_SIZE( MPI_COMM_WORLD, global_procs, ierr ) |
|---|
| 542 | #else |
|---|
| 543 | global_id = 0 |
|---|
| 544 | global_procs = 1 |
|---|
| 545 | #endif |
|---|
| 546 | IF ( maximum_parallel_io_streams == -1 .OR. maximum_parallel_io_streams > global_procs ) THEN |
|---|
| 547 | maximum_parallel_io_streams = global_procs |
|---|
| 548 | ENDIF |
|---|
| 549 | ! |
|---|
| 550 | !-- Now calculate the number of io_blocks and the io_group to which the respective PE belongs. I/O |
|---|
| 551 | !-- of the groups is done in serial, but in parallel for all PEs belonging to the same group. |
|---|
| 552 | io_blocks = global_procs / maximum_parallel_io_streams |
|---|
| 553 | io_group = MOD( global_id+1, io_blocks ) |
|---|
| 554 | |
|---|
| 555 | ! |
|---|
| 556 | !-- If required, read control parameters from restart file (produced by a prior run). All PEs are |
|---|
| 557 | !-- reading from file created by PE0 (see check_open) |
|---|
| 558 | IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN |
|---|
| 559 | |
|---|
| 560 | ! |
|---|
| 561 | !-- If not set by the user in the runtime parameters, the data format for restart input needs to |
|---|
| 562 | !-- be set now! This is normally done later in check parameters. |
|---|
| 563 | IF ( TRIM( restart_data_format ) /= 'fortran_binary' .AND. & |
|---|
| 564 | TRIM( restart_data_format ) /= 'mpi' .AND. & |
|---|
| 565 | TRIM( restart_data_format ) /= 'mpi_shared_memory' ) THEN |
|---|
| 566 | message_string = 'illegal restart data format "' // TRIM( restart_data_format ) // '"' |
|---|
| 567 | CALL message( 'parin', 'PA0724', 1, 2, 0, 6, 0 ) |
|---|
| 568 | ENDIF |
|---|
| 569 | IF ( TRIM( restart_data_format_input ) == 'undefined' ) THEN |
|---|
| 570 | restart_data_format_input = restart_data_format |
|---|
| 571 | ENDIF |
|---|
| 572 | |
|---|
| 573 | ! |
|---|
| 574 | !-- Blockwise I/O does not work together with MPI-I/O |
|---|
| 575 | IF ( restart_data_format_input(1:3) == 'mpi' .AND. io_blocks /= 1 ) THEN |
|---|
| 576 | CALL rrd_global |
|---|
| 577 | ELSE |
|---|
| 578 | ! |
|---|
| 579 | !-- Data is read in parallel by groups of PEs |
|---|
| 580 | DO i = 0, io_blocks-1 |
|---|
| 581 | IF ( i == io_group ) THEN |
|---|
| 582 | CALL rrd_global |
|---|
| 583 | ENDIF |
|---|
| 584 | #if defined( __parallel ) |
|---|
| 585 | CALL MPI_BARRIER( comm2d, ierr ) |
|---|
| 586 | #endif |
|---|
| 587 | ENDDO |
|---|
| 588 | ENDIF |
|---|
| 589 | |
|---|
| 590 | |
|---|
| 591 | ! |
|---|
| 592 | !-- Increment the run count |
|---|
| 593 | runnr = runnr + 1 |
|---|
| 594 | ! |
|---|
| 595 | !-- In case of a restart run, the number of user-defined profiles on the restart file (already |
|---|
| 596 | !-- stored in max_pr_user) has to match the one given for the current run. max_pr_user_tmp is |
|---|
| 597 | !-- calculated in user_parin and max_pr_user is read in via rrd_global. |
|---|
| 598 | IF ( max_pr_user /= max_pr_user_tmp ) THEN |
|---|
| 599 | WRITE( message_string, * ) 'the number of user-defined ', & |
|---|
| 600 | 'profiles given in data_output_pr (', max_pr_user_tmp, & |
|---|
| 601 | ') does not match the one ', & |
|---|
| 602 | 'found in the restart file (', max_pr_user, ')' |
|---|
| 603 | CALL message( 'user_parin', 'UI0009', 1, 2, 0, 6, 0 ) |
|---|
| 604 | ENDIF |
|---|
| 605 | ELSE |
|---|
| 606 | max_pr_user = max_pr_user_tmp |
|---|
| 607 | ENDIF |
|---|
| 608 | ! |
|---|
| 609 | !-- Activate spinup |
|---|
| 610 | IF ( land_surface .OR. urban_surface ) THEN |
|---|
| 611 | IF ( spinup_time > 0.0_wp ) THEN |
|---|
| 612 | coupling_start_time = spinup_time |
|---|
| 613 | time_since_reference_point = simulated_time - coupling_start_time |
|---|
| 614 | IF ( spinup_pt_mean == 9999999.9_wp ) THEN |
|---|
| 615 | spinup_pt_mean = pt_surface |
|---|
| 616 | ENDIF |
|---|
| 617 | end_time = end_time + spinup_time |
|---|
| 618 | IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN |
|---|
| 619 | spinup = .TRUE. |
|---|
| 620 | ELSEIF ( TRIM( initializing_actions ) == 'read_restart_data' .AND. & |
|---|
| 621 | time_since_reference_point > 0.0_wp ) THEN |
|---|
| 622 | data_output_during_spinup = .FALSE. !< required for correct ntdim calculation |
|---|
| 623 | !< in check_parameters for restart run |
|---|
| 624 | ENDIF |
|---|
| 625 | ENDIF |
|---|
| 626 | ENDIF |
|---|
| 627 | |
|---|
| 628 | ! |
|---|
| 629 | !-- In case of nested runs, explicitly set nesting boundary conditions. |
|---|
| 630 | !-- This will overwrite the user settings and basic defaults. |
|---|
| 631 | !-- bc_lr and bc_ns always need to be cyclic for vertical nesting. |
|---|
| 632 | IF ( nested_run ) THEN |
|---|
| 633 | IF ( nesting_mode == 'vertical' ) THEN |
|---|
| 634 | IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN |
|---|
| 635 | WRITE ( message_string, *) 'bc_lr and bc_ns were set to ,', & |
|---|
| 636 | 'cyclic for vertical nesting' |
|---|
| 637 | CALL message( 'parin', 'PA0428', 0, 0, 0, 6, 0 ) |
|---|
| 638 | bc_lr = 'cyclic' |
|---|
| 639 | bc_ns = 'cyclic' |
|---|
| 640 | ENDIF |
|---|
| 641 | IF ( child_domain ) THEN |
|---|
| 642 | bc_uv_t = 'nested' |
|---|
| 643 | bc_pt_t = 'nested' |
|---|
| 644 | bc_q_t = 'nested' |
|---|
| 645 | bc_s_t = 'nested' |
|---|
| 646 | bc_cs_t = 'nested' |
|---|
| 647 | bc_p_t = 'neumann' |
|---|
| 648 | ENDIF |
|---|
| 649 | ! |
|---|
| 650 | !-- For other nesting modes only set boundary conditions for nested domains. |
|---|
| 651 | ELSE |
|---|
| 652 | IF ( child_domain ) THEN |
|---|
| 653 | bc_lr = 'nested' |
|---|
| 654 | bc_ns = 'nested' |
|---|
| 655 | bc_uv_t = 'nested' |
|---|
| 656 | bc_pt_t = 'nested' |
|---|
| 657 | bc_q_t = 'nested' |
|---|
| 658 | bc_s_t = 'nested' |
|---|
| 659 | bc_cs_t = 'nested' |
|---|
| 660 | bc_p_t = 'neumann' |
|---|
| 661 | ENDIF |
|---|
| 662 | ENDIF |
|---|
| 663 | ENDIF |
|---|
| 664 | ! |
|---|
| 665 | !-- Set boundary conditions also in case the model is offline-nested in larger-scale models. |
|---|
| 666 | IF ( nesting_offline ) THEN |
|---|
| 667 | bc_lr = 'nesting_offline' |
|---|
| 668 | bc_ns = 'nesting_offline' |
|---|
| 669 | bc_uv_t = 'nesting_offline' |
|---|
| 670 | bc_pt_t = 'nesting_offline' |
|---|
| 671 | bc_q_t = 'nesting_offline' |
|---|
| 672 | ! bc_s_t = 'nesting_offline' ! scalar boundary condition is not clear yet |
|---|
| 673 | ! bc_cs_t = 'nesting_offline' ! same for chemical species |
|---|
| 674 | bc_p_t = 'neumann' |
|---|
| 675 | ENDIF |
|---|
| 676 | |
|---|
| 677 | ! |
|---|
| 678 | !-- In case of nested runs, make sure that initializing_actions = 'set_constant_profiles' even |
|---|
| 679 | !-- though the constant-profiles initializations for the prognostic variables will be overwritten by |
|---|
| 680 | !-- pmci_child_initialize and pmci_parent_initialize. This is, however, important e.g. to make sure |
|---|
| 681 | !-- that diagnostic variables are set properly. An exception is made in case of restart runs and if |
|---|
| 682 | !-- user decides to do everything by its own. |
|---|
| 683 | IF ( child_domain .AND. .NOT. ( TRIM( initializing_actions ) == 'read_restart_data' .OR. & |
|---|
| 684 | TRIM( initializing_actions ) == 'set_constant_profiles' .OR. & |
|---|
| 685 | TRIM( initializing_actions ) == 'by_user' ) & |
|---|
| 686 | ) THEN |
|---|
| 687 | message_string = 'initializing_actions = ' // TRIM( initializing_actions ) // & |
|---|
| 688 | ' has been ' // 'changed to set_constant_profiles in child ' // 'domain.' |
|---|
| 689 | CALL message( 'parin', 'PA0492', 0, 0, 0, 6, 0 ) |
|---|
| 690 | |
|---|
| 691 | initializing_actions = 'set_constant_profiles' |
|---|
| 692 | ENDIF |
|---|
| 693 | ! |
|---|
| 694 | !-- Check validity of lateral boundary conditions. This has to be done here because they are already |
|---|
| 695 | !-- used in init_pegrid and init_grid and therefore cannot be check in check_parameters |
|---|
| 696 | IF ( bc_lr /= 'cyclic' .AND. bc_lr /= 'dirichlet/radiation' .AND. & |
|---|
| 697 | bc_lr /= 'radiation/dirichlet' .AND. bc_lr /= 'nested' .AND. & |
|---|
| 698 | bc_lr /= 'nesting_offline' ) THEN |
|---|
| 699 | message_string = 'unknown boundary condition: bc_lr = "' // TRIM( bc_lr ) // '"' |
|---|
| 700 | CALL message( 'parin', 'PA0049', 1, 2, 0, 6, 0 ) |
|---|
| 701 | ENDIF |
|---|
| 702 | IF ( bc_ns /= 'cyclic' .AND. bc_ns /= 'dirichlet/radiation' .AND. & |
|---|
| 703 | bc_ns /= 'radiation/dirichlet' .AND. bc_ns /= 'nested' .AND. & |
|---|
| 704 | bc_ns /= 'nesting_offline' ) THEN |
|---|
| 705 | message_string = 'unknown boundary condition: bc_ns = "' // TRIM( bc_ns ) // '"' |
|---|
| 706 | CALL message( 'parin', 'PA0050', 1, 2, 0, 6, 0 ) |
|---|
| 707 | ENDIF |
|---|
| 708 | ! |
|---|
| 709 | !-- Set internal variables used for speed optimization in if clauses |
|---|
| 710 | IF ( bc_lr /= 'cyclic' ) bc_lr_cyc = .FALSE. |
|---|
| 711 | IF ( bc_lr == 'dirichlet/radiation' ) bc_lr_dirrad = .TRUE. |
|---|
| 712 | IF ( bc_lr == 'radiation/dirichlet' ) bc_lr_raddir = .TRUE. |
|---|
| 713 | IF ( bc_ns /= 'cyclic' ) bc_ns_cyc = .FALSE. |
|---|
| 714 | IF ( bc_ns == 'dirichlet/radiation' ) bc_ns_dirrad = .TRUE. |
|---|
| 715 | IF ( bc_ns == 'radiation/dirichlet' ) bc_ns_raddir = .TRUE. |
|---|
| 716 | ! |
|---|
| 717 | !-- Radiation-Dirichlet conditions are allowed along one of the horizontal directions only. |
|---|
| 718 | !-- In general, such conditions along x and y may work, but require a) some code changes (e.g. |
|---|
| 719 | !-- concerning allocation of c_u, c_v ... arrays), and b) a careful model setup by the user, in |
|---|
| 720 | !-- order to guarantee that there is a clearly defined outflow at two sides. |
|---|
| 721 | !-- Otherwise, the radiation condition may produce wrong results. |
|---|
| 722 | IF ( ( bc_lr_dirrad .OR. bc_lr_raddir ) .AND. ( bc_ns_dirrad .OR. bc_ns_raddir ) ) THEN |
|---|
| 723 | message_string = 'bc_lr = "' // TRIM( bc_lr ) // '" and bc_ns = "' // TRIM( bc_ns ) // & |
|---|
| 724 | '" are not allowed to be set at the same time' |
|---|
| 725 | CALL message( 'parin', 'PA0589', 1, 2, 0, 6, 0 ) |
|---|
| 726 | ENDIF |
|---|
| 727 | ! |
|---|
| 728 | !-- Check in case of initial run, if the grid point numbers are well defined and allocate some |
|---|
| 729 | !-- arrays which are already needed in init_pegrid or check_parameters. During restart jobs, these |
|---|
| 730 | !-- arrays will be allocated in rrd_global. All other arrays are allocated in init_3d_model. |
|---|
| 731 | IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN |
|---|
| 732 | |
|---|
| 733 | IF ( nx <= 0 ) THEN |
|---|
| 734 | WRITE( message_string, * ) 'no value or wrong value given', ' for nx: nx=', nx |
|---|
| 735 | CALL message( 'parin', 'PA0273', 1, 2, 0, 6, 0 ) |
|---|
| 736 | ENDIF |
|---|
| 737 | IF ( ny <= 0 ) THEN |
|---|
| 738 | WRITE( message_string, * ) 'no value or wrong value given', ' for ny: ny=', ny |
|---|
| 739 | CALL message( 'parin', 'PA0274', 1, 2, 0, 6, 0 ) |
|---|
| 740 | ENDIF |
|---|
| 741 | IF ( nz <= 0 ) THEN |
|---|
| 742 | WRITE( message_string, * ) 'no value or wrong value given', ' for nz: nz=', nz |
|---|
| 743 | CALL message( 'parin', 'PA0275', 1, 2, 0, 6, 0 ) |
|---|
| 744 | ENDIF |
|---|
| 745 | |
|---|
| 746 | ! |
|---|
| 747 | !-- As a side condition, routine flow_statistics require at least 14 vertical grid levels (they |
|---|
| 748 | !-- are used to store time-series data) |
|---|
| 749 | !> @todo Remove this restriction |
|---|
| 750 | IF ( nz < 14 ) THEN |
|---|
| 751 | WRITE( message_string, * ) 'nz >= 14 is required' |
|---|
| 752 | CALL message( 'parin', 'PA0362', 1, 2, 0, 6, 0 ) |
|---|
| 753 | ENDIF |
|---|
| 754 | |
|---|
| 755 | ! |
|---|
| 756 | !-- ATTENTION: in case of changes to the following statement please also check the allocate |
|---|
| 757 | !-- statement in routine rrd_global |
|---|
| 758 | ALLOCATE( pt_init(0:nz+1), q_init(0:nz+1), s_init(0:nz+1), & |
|---|
| 759 | ref_state(0:nz+1), sa_init(0:nz+1), ug(0:nz+1), & |
|---|
| 760 | u_init(0:nz+1), v_init(0:nz+1), vg(0:nz+1), & |
|---|
| 761 | hom(0:nz+1,2,pr_palm+max_pr_user+max_pr_cs+max_pr_salsa,0:statistic_regions), & |
|---|
| 762 | hom_sum(0:nz+1,pr_palm+max_pr_user+max_pr_cs+max_pr_salsa,0:statistic_regions) ) |
|---|
| 763 | |
|---|
| 764 | hom = 0.0_wp |
|---|
| 765 | |
|---|
| 766 | ENDIF |
|---|
| 767 | |
|---|
| 768 | ! |
|---|
| 769 | !-- NAMELIST-file is not needed anymore |
|---|
| 770 | CALL close_file( 11 ) |
|---|
| 771 | |
|---|
| 772 | CALL location_message( 'reading NAMELIST parameters from PARIN', 'finished' ) |
|---|
| 773 | |
|---|
| 774 | END SUBROUTINE parin |
|---|
