= Static driver look-up tables =
All ''_pars'' variables are of NC_FLOAT type. Note that ''[#building_pars building_pars]'' and ''[#building_surface_pars building_surface_pars]'' will undergo major revision in near future.

== [#albedo_pars ''albedo_pars(nalbedo_pars,y,x)'']

||='''nalbedo_pars'''   =||='''Units''' =||='''Description'''           =||
|| 0|| 1 || Broadband albedo of surface elements (wall fraction in case of building) at (y,x).  ||
|| 1|| 1 || Only for buildings. Longwave albedo of wall fraction at (y,x).  ||
|| 2|| 1 || Only for buildings. Shortwave albedo of wall fraction at (y,x).  ||
|| 3|| 1 || Only for buildings. Longwave albedo of green fraction at (y,x).  ||
|| 4|| 1 || Only for buildings. Shortwave albedo of green fraction at (y,x).  ||
|| 5|| 1 || Only for buildings. Longwave albedo of window fraction at (y,x).  ||
|| 6|| 1 || Only for buildings. Shortwave albedo of window fraction at (y,x).  ||
 

== [#building_pars ''building_pars(nbuilding_pars,y,x)'']

[[span(style=color: #FF0000, Please note, buildings_pars will undergo a major revision soon. )]]

||='''nbuilding_pars'''   =||='''Units''' =||='''Description''' =||
||  0|| 1 || Wall fraction above the ground floor level ||
||  1|| 1 || Window fraction above the ground floor level ||
||  2|| 1 || Green fraction on wall above the ground floor level ||
||  3|| 1 || Green fraction on roof ||
||  4|| m²/m² || Leaf area index of green fraction on roof ||
||  5|| m²/m² || Leaf area index of green fraction on wall above the ground floor level ||
||  6|| J/m²/K || Heat capacity of wall layer 1 above the ground floor level ||
||  7|| J/m²/K || Heat capacity of wall layer 2 above the ground floor level ||
||  8|| J/m²/K || Heat capacity of wall layer 3 above the ground floor level ||
||  9|| W/m/K || Thermal conductivity of wall layer 1 above the ground floor level ||
|| 10|| W/m/K || Thermal conductivity of wall layer 2 above the ground floor level ||
|| 11|| W/m/K || Thermal conductivity of wall layer 3 above the ground floor level ||
|| 12|| K || Indoor target summer temperature ||
|| 13|| K || Indoor target winter temperature ||
|| 14|| 1 || Emissivity of wall fraction above the ground floor level ||
|| 15|| 1 || Emissivity of green fraction above the ground floor level ||
|| 16|| 1 || Emissivity of window fraction above the ground floor level ||
|| 17|| 1 || Transmissivity of window fraction above the ground floor level ||
|| 18|| m || Roughness length for momentum above the ground floor level ||
|| 19|| m || Roughness length for heat above the ground floor level ||
|| 20|| m || Ground floor height ||
|| 21|| 1 || Ground floor wall fraction ||
|| 22|| 1 || Ground floor window fraction ||
|| 23|| 1 || Ground floor green fraction on wall ||
|| 24|| 1 || Ground floor green fraction on roof ||
|| 25|| m²/m² || Ground floor leaf area index of green fraction (wall) ||
|| 26|| J/m²/K || Ground floor heat capacity of wall layer 1 ||
|| 27|| J/m²/K || Ground floor heat capacity of wall layer 2 ||
|| 28|| J/m²/K || Ground floor heat capacity of wall layer 3 ||
|| 29|| W/m/K  || Ground floor thermal conductivity of wall layer 1 ||
|| 30|| W/m/K || Ground floor thermal conductivity of wall layer 2 ||
|| 31|| W/m/K  || Ground floor thermal conductivity of wall layer 3 ||
|| 32|| 1 || Ground floor emissivity of wall fraction ||
|| 33|| 1 || Ground floor emissivity of green fraction ||
|| 34|| 1 || Ground floor emissivity of window fraction ||
|| 35|| 1 || Ground floor transmissivity of window fraction ||
|| 36|| m || Ground floor roughness length for momentum ||
|| 37|| m || Ground floor roughness length for heat ||
|| 38|| 1 || albedo\_type of wall fraction ||
|| 39|| 1 || albedo\_type of green fraction ||
|| 40|| 1 || albedo\_type of window fraction ||
|| 41|| m || Wall depth of layer 1 ||
|| 42|| m || Wall depth of layer 2 ||
|| 43|| m || Wall depth of layer 3 ||
|| 44|| m || Wall depth of layer 4 ||
|| 45|| J/m²/K || Surface wall heat capacity ||
|| 46|| W/m²/K || Surface wall conductivity ||
|| 47|| J/m²/K || Heat capacity of window surface ||
|| 48|| J/m²/K || Heat capacity of green surface ||
|| 49|| W/m/K || Thermal conductivity of window surface ||
|| 50|| W/m/K || Thermal conductivity of green surface ||
|| 51*|| 1 || Wall fraction ground plate ||
|| 52*|| m || depth of ground plate wall layer 1 ||
|| 53*|| m || depth of ground plate wall layer 2 ||
|| 54*|| m || depth of ground plate wall layer 3 ||
|| 55*|| m || depth of ground plate wall layer 4 ||
|| 56*|| J/m²/K || Heat capacity of ground plate wall layers 1 ||
|| 57*|| J/m²/K || Heat capacity of ground plate wall layer 2 ||
|| 58*|| J/m²/K || Heat capacity of ground plate wall layer 3 ||
|| 59*|| W/m/K || Thermal conductivity of ground plate wall layers 1 ||
|| 60*|| W/m/K || Thermal conductivity of ground plate wall layer 2 ||
|| 61*|| W/m/K || Thermal conductivity of ground plate wall layer 3 ||
|| 62|| m || depth of first floor wall layer 1 ||
|| 63|| m || depth of first floor wall layer 2 ||
|| 64|| m || depth of first floor wall layer 3 ||
|| 65|| m || depth of first floor wall layer 4 || 
|| 66|| 1 || Albedo of ground floor wall ||
|| 67|| m || depth of first floor window layer 1 ||
|| 68|| m || depth of first floor window layer 2 ||
|| 69|| m || depth of first floor window layer 3 ||
|| 70|| m || depth of first floor window layer 4 ||
|| 71|| J/m²/K || Heat capacity of first floor window layers 1 ||
|| 72|| J/m²/K || Heat capacity of first floor window layer 2 ||
|| 73|| J/m²/K || Heat capacity of first floor window layer 3 ||
|| 74|| W/m/K || Thermal conductivity of first floor window layers 1 ||
|| 75|| W/m/K || Thermal conductivity of first floor window layer 2 ||
|| 76|| W/m/K || Thermal conductivity of first floor window layer 3 ||
|| 77|| 1 || Albedo of first floor window ||
|| 78|| 1 || Albedo of first floor green surface ||
|| 79|| m || depth of standard floor window layer 1 ||
|| 80|| m || depth of standard floor window layer 2 ||
|| 81|| m || depth of standard floor window layer 3 ||
|| 82|| m || depth of standard floor window layer 4 ||
|| 83|| J/m²/K || Heat capacity of standard floor wall layers 1 ||
|| 84|| J/m²/K || Heat capacity of standard floor wall layer 2 ||
|| 85|| J/m²/K || Heat capacity of standard floor wall layer 3 ||
|| 86|| W/m/K || Thermal conductivity of standard floor wall layers 1 ||
|| 87|| W/m/K || Thermal conductivity of standard floor wall layer 2 ||
|| 88|| W/m/K || Thermal conductivity of standard floor wall layer 3 ||
|| 89|| 1 || Wall fraction of roof ||
|| 90|| m || depth of roof layer 1 ||
|| 91|| m || depth of roof layer 2 ||
|| 92|| m || depth of roof layer 3 ||
|| 93|| m || depth of roof layer 4 ||
|| 94|| J/m²/K || Heat capacity of roof layers 1 ||
|| 95|| J/m²/K || Heat capacity of roof layer 2 ||
|| 96|| J/m²/K || Heat capacity of roof layer 3 ||
|| 97|| W/m/K || Thermal conductivity of roof layers 1 ||
|| 98|| W/m/K || Thermal conductivity of roof layer 2 ||
|| 99|| W/m/K || Thermal conductivity of roof layer 3 ||
|| 100|| 1 || Emissivity of roof ||
|| 101|| 1 || Albedo of roof ||
|| 102|| 1 || Window fraction of roof ||
|| 103|| m || depth of roof window layer 1 ||
|| 104|| m || depth of roof window layer 2 ||
|| 105|| m || depth of roof window layer 3 ||
|| 106|| m || depth of roof window layer 4 ||
|| 107|| J/m²/K || Heat capacity of window layers 1  ||
|| 108|| J/m²/K || Heat capacity of window layer 2 ||
|| 109|| J/m²/K || Heat capacity of window layer 3 ||
|| 110|| W/m/K || Thermal conductivity of window layers 1 ||
|| 111|| W/m/K || Thermal conductivity of window layer 2 ||
|| 112|| W/m/K || Thermal conductivity of window layer 3 ||
|| 113|| 1 || Emissivity of roof window ||
|| 114|| 1 || Transmissivity of roof window ||
|| 115|| 1 || Albedo of roof window ||
|| 116|| 1 || Emissivity of roof green surface ||
|| 117|| 1 || Albedo of roof green surface ||
|| 118|| 1 || Type of green roof (=2 extensive, =1 intensive))  ||
|| 119|| 1 || Shading factor ||
|| 120|| 1 || Window g-value ||
|| 121|| W/m²/K || Window u-value ||
|| 122|| 1/h || Basic air flow without occupancy of room ||
|| 123|| 1/h || Additional air flow during occupancy of room ||
|| 124|| 1 || Heat recovery efficiency ||
|| 125|| 1 || Factor for mass specific active surface ||
|| 126|| J/m²/K || Factor for inner heat storage of building zone ||
|| 127|| 1 || Ratio of internal surface to floor area ||
|| 128|| W || Maximum heating capacity ||
|| 129|| W || Maximum cooling capacity ||
|| 130|| W/m² || Additional internal heat gains during occupancy of room ||
|| 131|| W/m² || Basic internal heat gains without occupancy of room ||
|| 132|| m || Storey height ||
|| 133*|| m || Ceiling construction height ||
|| 134|| 1 || Technology heating factor for anthropogenic heat losses ||
|| 135|| 1 || Technology cooling factor for anthropogenic heat losses ||
|| 136|| J/m²/K || Heat capacity of wall layer 4 above the ground floor level ||
|| 137|| W/m/K || Thermal conductivity of wall layer 4 above the ground floor level ||
|| 138|| J/m²/K || Heat capacity of wall layer 4 at the ground floor level ||
|| 139|| W/m/K || Thermal conductivity of wall layer 4 at the ground floor level ||
|| 140*|| J/m²/K || Heat capacity of wall layer 4 at ground plate ||
|| 141*|| W/m/K || Thermal conductivity of wall layer 4 at ground plate ||
|| 142|| J/m²/K || Heat capacity of window layer 4 at the ground floor level ||
|| 143|| W/m/K || Thermal conductivity of window layer 4 at the ground floor level ||
|| 144|| J/m²/K || Heat capacity of window layer 4 above the ground floor level ||
|| 145|| W/m/K || Thermal conductivity of window layer 4 above the ground floor level ||
|| 146|| J/m²/K || Heat capacity of wall layer 4 at roof ||
|| 147|| W/m/K || Thermal conductivity of wall layer 4 at roof ||
|| 148|| J/m²/K || Heat capacity of window layer 4 at roof ||
|| 149|| W/m/K ||  Thermal conductivity of window layer 4 at roof ||
(*) are not processed by PALM at the moment.


== [#building_surface_pars ''building_surface_pars(nbuilding_surface_pars,ns)'']
||='''nbuilding_surface_pars'''   =||='''Units''' =||='''Description'''           =||
||  0|| 1 || Wall fraction ||
||  1|| 1 || Window fraction ||
||  2|| 1 || Green fraction on wall ||
||  3|| 1 || Green fraction on roof ||
||  4|| m²/m² || Leaf area index of green fraction ||
||  5|| J/m²/K || Heat capacity of wall layer 1 ||
||  6|| J/m²/K || Heat capacity of wall layer 2 ||
||  7|| J/m²/K || Heat capacity of wall layer 3 ||
||  8|| W/m/K || Thermal conductivity of wall layer 1 ||
||  9|| W/m/K || Thermal conductivity of wall layer 2 ||
|| 10|| W/m/K || Thermal conductivity of wall layer 3 ||
|| 11|| K || Indoor target summer temperature ||
|| 12|| K || Indoor target winter temperature ||
|| 13|| 1 || Emissivity of wall fraction ||
|| 14|| 1 || Emissivity of green fraction ||
|| 15|| 1 || Emissivity of window fraction ||
|| 16|| 1 || Transmissivity of window fraction ||
|| 17|| m || Roughness length for momentum ||
|| 18|| m || Roughness length for heat ||
|| 19|| 1 || Broadband albedo of wall fraction ||
|| 20|| 1 || Longwave albedo of wall fraction ||
|| 21|| 1 || Shortwave albedo of wall fraction ||
|| 22|| 1 || Broadband albedo of window fraction ||
|| 23|| 1 || Longwave albedo of window fraction ||
|| 24|| 1 || Shortwave albedo of window fraction ||
|| 25|| 1 || Broadband albedo of green fraction ||
|| 26|| 1 || Longwave albedo of green fraction ||
|| 27|| 1 || Shorwave albedo of green fraction ||

== [#pavement_pars ''pavement_pars(npavement_pars,y,x)'']
||='''npavement_pars'''   =||='''Units''' =||='''Description'''           =||
|| 0|| m || Roughness length for momentum ||
|| 1|| m || Roughness length for heat ||
|| 2|| 1 || ''[../#albedo_type albedo_type]'' ||
|| 3|| 1 || Surface emissivity ||

== [#pavement_subsurface_pars ''pavement_subsurface_pars(npavement_subsurface_pars,zsoil,y,x)'']
||='''npavement_subsurface_pars'''   =||='''Units''' =||='''Description'''           =||
|| 0|| W/m/K || Thermal conductivity of the respective soil layer ||
|| 1|| J/m³/K || Volumetric heat capacity of the respective soil layer ||


== [#soil_pars ''soil_pars(nsoil_pars,(zsoil,)y,x)'']
||='''nsoil_pars'''   =||='''Units''' =||='''Description'''           =||
|| 0|| 1 || Van Genuchten parameter '''α''' ||
|| 1|| 1 || Van Genuchten parameter '''l''' ||
|| 2|| 1 || Van Genuchten parameter '''n''' ||
|| 3|| m/s || Saturation hydraulic conductivity ||
|| 4|| m³/m³ || Saturation soil moisture ||
|| 5|| m³/m³ || Field capacity ||
|| 6|| m³/m³ || Wilting point  ||
|| 7|| m³/m³ || Residual moisture ||


== [#vegetation_pars ''vegetation_pars(nvegetation_pars,y,x)'']
||='''nvegetation_pars'''   =||='''Units''' =||='''Descripton'''           =||
||  0|| s/m || Minimum canopy resistance ||
||  1|| m²/m² || Leaf area index ||
||  2|| 1 || Vegetation coverage ||
||  3|| 1/hPa || Canopy resistance coefficient ||
||  4|| m || Roughness length for momentum ||
||  5|| m || Roughness length for heat ||
||  6|| W/m²/K || Skin lacer heat conductivity (stable conditions) ||
||  7|| W/m²/K || Skin layer heat conductivity (unstable conditions) ||
||  8|| 1 || Fraction of incoming shortwave radiation transmitted directly to the soil (not implemented yet) ||
||  9|| J/m²/K || Heat capacity of the surface ||
|| 10|| 1 || ''[../#albedo_type albedo_type]'' ||
|| 11|| 1 || Surface emissivity ||



== [#water_pars ''water_pars(nwater_pars,y,x)'']
||='''nwater_pars'''   =||='''Units''' =||='''Description'''           =||
|| 0|| K || Water temperature ||
|| 1|| m || Roughness length for momentum ||
|| 2|| m || Roughness length for heat ||
|| 3|| W/m²/K || Heat conductivity between skin layer and water (stable conditions)  ||
|| 4|| W/m²/K || Heat conductivity between skin layer and water (unstable conditions)  ||
|| 5|| 1 || ''[../#albedo_type albedo_type]''  ||
|| 6|| 1 || Surface emissivity ||