== [=#dynamic_input '''Dynamic input file'''] ==

The dynamic input file (see [../#PIDS_DYNAMIC PIDS_DYNAMIC]) comprises all data which might change depending on the day of year, such as initialization data, large-scale forcing tendencies or boundary data.  
Utilizing the pre-processing tool [wiki:doc/app/iofiles/inifor INIFOR], the respective data can be derived directly from the larger-scale [[http://www.cosmo-model.org/content/default.htm|COSMO model]] (except for active or passive chemical components which are not considered in the COSMO model). Another tool [wiki:doc/app/iofiles/wrf_interface WRF interface] extracts meteorological and chemical initialization and boundary data from WRF and CAMx outputs. This way, the dynamic input file acts as a interface between a larger-scale model and PALM, being a so-called [wiki:doc/app/nesting_offl_parameters mesoscale nesting]. 
In case of a [wiki:doc/app/nesting_parameters nested] model run (online), only the parent domain considers the dynamic input_file for inititialization and offline-nesting, while embedded child models itself will be initialized and forced via its parent domains.    
In order to activate input from the dynamic input file, setting of [wiki:doc/app/initialization_parameters#initializing_actions initializing_actions] = 'read_from_file' is required. 
For more information of how to create a dynamic input file, please see the [wiki:doc/app/iofiles/inifor INIFOR documentation] or the [wiki:doc/app/iofiles/wrf_interface WRF interface documentation], respectively. 

Further, the dynamic input file can also be used to setup a turbulent inflow, where temporarily high resolution inflow boundary data obtained from a respective precursor run is read from the dynamic input file. The pre-processing tool pcycle can be used to create a respective dynamic input file by reading and processing the precursor data accordingly.

||='''Input variable'''  =||='''Type'''  =||='''LOD''' =||='''Explanation / Remarks'''  =||
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#init_atmosphere_pt '''init_atmosphere_pt''']//
(z,(y),(x))
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1, 2
}}}
{{{#!td
{{{lod=1}}}: Initial profile of potential temperature. //

{{{lod=2}}}: Initial volume data of potential temperature.
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#init_atmosphere_qv '''init_atmosphere_qv''']//
(z,(y),(x))
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1, 2
}}}
{{{#!td
{{{lod=1}}}: Initial profile of mixing ratio. //

{{{lod=2}}}: Initial volume data of mixing_ratio. 

Input of this quantity becomes only effective if [wiki:doc/app/initialization_parameters#humidity humidity] = ''.T.''.
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#init_atmosphere_u '''init_atmosphere_u''']//
(z,(y),(x))
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1, 2
}}}
{{{#!td
{{{lod=1}}}: Initial profile of the wind component in the x-direction. //

{{{lod=2}}}: Initial volume data of the wind component in the x-direction. 
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#init_atmosphere_v '''init_atmosphere_v''']//
(z,(y),(x))
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1, 2
}}}
{{{#!td
{{{lod=1}}}: Initial profile of the wind component in the y-direction. //

{{{lod=2}}}: Initial volume data of the wind component in the y-direction. 
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#init_atmosphere_w '''init_atmosphere_w''']//
(z,(y),(x))
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1, 2
}}}
{{{#!td
{{{lod=1}}}: Initial profile of the wind component in the z-direction. //

{{{lod=2}}}: Initial volume data of the wind component in the z-direction. 
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#init_atmosphere_s '''init_atmosphere_s''']//
(z,(y),(x))
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1, 2
}}}
{{{#!td
{{{lod=1}}}: Initial profile of any passive scalar. //

{{{lod=2}}}: Initial volume data of any passive scalar. 

Input of this quantity becomes only effective if [wiki:doc/app/initialization_parameters#passive_scalar passive_scalar] = ''.T.''. Please note, this quantity is currently not provided by [#inifor inifor]. 
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#init_atmosphere_no '''init_atmosphere_no''']//
(z,(y),(x))
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1, 2
}}}
{{{#!td
{{{lod=1}}}: Initial profile of nitrogen monoxide. //

{{{lod=2}}}: Initial volume data of nitrogen monoxide. 

Input of this quantity becomes only effective if the [wiki:doc/app/chemistry_parameters chemistry model] is switched on. Please note, this quantity is currently not provided by [#inifor inifor].  
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#init_atmosphere_no2 '''init_atmosphere_no2''']//
(z,(y),(x))
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1, 2
}}}
{{{#!td
{{{lod=1}}}: Initial profile of nitrogen dioxide. //

{{{lod=2}}}: Initial volume data of nitrogen dioxide. 

Input of this quantity becomes only effective if the [wiki:doc/app/chemistry_parameters chemistry model] is switched on. Please note, this quantity is currently not provided by [#inifor inifor].  
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#init_atmosphere_no3 '''init_atmosphere_no3''']//
(z,(y),(x))
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1, 2
}}}
{{{#!td
{{{lod=1}}}: Initial profile of nitrate. //

{{{lod=2}}}: Initial volume data of nitrate. 

Input of this quantity becomes only effective if the [wiki:doc/app/chemistry_parameters chemistry model] is switched on. Please note, this quantity is currently not provided by [#inifor inifor].  
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#init_atmosphere_pm10 '''init_atmosphere_pm10''']//
(z,(y),(x))
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1, 2
}}}
{{{#!td
{{{lod=1}}}: Initial profile of PM10. //

{{{lod=2}}}: Initial volume data of PM10. 

Input of this quantity becomes only effective if the [wiki:doc/app/chemistry_parameters chemistry model] is switched on. Please note, this quantity is currently not provided by [#inifor inifor].  
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#init_atmosphere_hno3 '''init_atmosphere_hno3''']//
(z,(y),(x))
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1, 2
}}}
{{{#!td
{{{lod=1}}}: Initial profile of nitric acid. //

{{{lod=2}}}: Initial volume data of nitric acid. 

Input of this quantity becomes only effective if the [wiki:doc/app/chemistry_parameters chemistry model] is switched on. Please note, this quantity is currently not provided by [#inifor inifor].  
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#init_atmosphere_so4 '''init_atmosphere_so4''']//
(z,(y),(x))
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1, 2
}}}
{{{#!td
{{{lod=1}}}: Initial profile of sulfate. //

{{{lod=2}}}: Initial volume data of sulfate. 

Input of this quantity becomes only effective if the [wiki:doc/app/chemistry_parameters chemistry model] is switched on. Please note, this quantity is currently not provided by [#inifor inifor].  
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#init_atmosphere_yyy '''init_atmosphere_yyy''']//
(z,(y),(x))
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1, 2
}}}
{{{#!td
{{{lod=1}}}: Initial profile of any further species. //

{{{lod=2}}}: Initial volume data of any further species. 

Input of this quantity becomes only effective if the [wiki:doc/app/chemistry_parameters chemistry model] is switched on. Please note, this quantity is currently not provided by [#inifor inifor]. 
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#init_atmosphere_aerosol '''init_atmosphere_aerosol''']//
(z,Dmid)
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1
}}}
{{{#!td
{{{lod=1}}}: Initial profile of aerosol number concentration per aerosol size bin (# m^-3^). The bin mean diameter ''Dmid'' given in nm. //

Input of this quantity becomes only effective if the [wiki:doc/tec/aerosol aerosol module SALSA] is switched on. Please note, this quantity is currently not provided by [#inifor inifor].  
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#init_atmosphere_mass_fracs_a '''init_atmosphere_mass_fracs_a''']//
(z,composition_index)
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1
}}}
{{{#!td
Vertical profile of the mass fractions of background/initial aerosol concentration: subrange a.

Input of this quantity becomes only effective if the [wiki:doc/tec/aerosol aerosol module SALSA] is switched on. Please note, this quantity is currently not provided by [#inifor inifor].  
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#composition_name '''composition_name''']//
(composition_index,// max_string_length)
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_CHAR
}}}
{{{#!td style="vertical-align:top;width: 50px"

}}}
{{{#!td
List of chemical components of aerosol particles. 
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#init_soil_t '''init_soil_t''']//
(zsoil,(y),(x))
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1, 2
}}}
{{{#!td
{{{lod=1}}}: Initial vertical profile of soil temperature. //

{{{lod=2}}}: Initial volume data of soil temperature. 

Input of this quantity becomes only effective if the [https://docs.palm-model.org/24.04-rc.1/Reference/LES_Model/Namelists/#land-surface-parameters land-surface model] is switched on. In case of a nested run and no dynamic input file is present for the child domain, soil temperature in the child domain will be initialized by horizontal mean vertical soil-temperature profiles derived from the respective parent domain.  
Moreover, please note '''zsoil''' need to have the same dimensions as in the static input file
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#init_soil_m '''init_soil_m''']//
(zsoil,(y),(x))
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1, 2
}}}
{{{#!td
{{{lod=1}}}: Initial vertical profile of soil moisture. //

{{{lod=2}}}: Initial volume data of soil moisture. 

Input of this quantity becomes only effective if the [https://docs.palm-model.org/24.04-rc.1/Reference/LES_Model/Namelists/#land-surface-parameters land-surface model] is switched on. In case of a nested run and no dynamic input file is present for the child domain, soil moisture in the child domain will be initialized by horizontal mean vertical soil-temperature profiles derived from the respective parent domain.  
Moreover, please note '''zsoil''' need to have the same dimensions as in the static input file
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#nudging_pt '''nudging_pt''']//
(time,z)
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
none
}}}
{{{#!td
Nudging data for potential temperature. 
Requires cyclic boundary conditions as well as [wiki:doc/app/initialization_parameters#nudging nudging] = .T. to become effective.  
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#nudging_qv '''nudging_qv''']//
(time,z)
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
none
}}}
{{{#!td
Nudging data for the mixing ratio. 
Requires cyclic boundary conditions as well as [wiki:doc/app/initialization_parameters#nudging nudging] = .T. and [wiki:doc/app/initialization_parameters#humidity humidity] = .T. to become effective.  
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#nudging_u '''nudging_u''']//
(time,z)
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
none
}}}
{{{#!td
Nudging data for the wind in the x-direction. 
Requires cyclic boundary conditions to become effective.  
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#nudging_v '''nudging_v''']//
(time,z)
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
none
}}}
{{{#!td
Nudging data for the wind in the y-direction. 
Requires cyclic boundary conditions to become effective.  
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#nudging_w '''nudging_w''']//
(time,z)
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
none
}}}
{{{#!td
Nudging data for the wind in the z-direction. 
Requires cyclic boundary conditions to become effective.  
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#nudging_s '''nudging_s''']//
(time,z)
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
none
}}}
{{{#!td
Nudging data for a passive scalar. 
Requires cyclic boundary conditions as well as [wiki:doc/app/initialization_parameters#nudging nudging] = .T. and [wiki:doc/app/initialization_parameters#passive_scalar passive_scalar] = .T. to become effective.  
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#nudging_tau '''nudging_tau''']//
(time,z)
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
none
}}}
{{{#!td
Nudging relaxation time scale.  
Requires cyclic boundary conditions as well as [wiki:doc/app/initialization_parameters#nudging nudging] = .T. to become effective.  
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#ls_forcing_ug '''ls_forcing_ug''']//
(time,z)
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
none
}}}
{{{#!td
Large­-scale forcing data for the geostrophic wind component in x-direction.   
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#ls_forcing_vg '''ls_forcing_vg''']//
(time,z)
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
none
}}}
{{{#!td
Large­-scale forcing data for the geostrophic wind component in y-direction.    
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#ls_forcing_sub_w '''ls_forcing_sub_w''']//
(time,z)
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
none
}}}
{{{#!td
Large­-scale forcing data for the subsidence velocity.    
Requires cyclic boundary conditions as well as [wiki:doc/app/initialization_parameters#large_scale_forcing large_scale_forcing] = .T. to become effective.  
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#ls_forcing_adv_lpt '''ls_forcing_adv_lpt''']//
(time,z)
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
none
}}}
{{{#!td
Large­-scale forcing data for the advection tendency of potential temperature.     
Requires cyclic boundary conditions as well as [wiki:doc/app/initialization_parameters#large_scale_forcing large_scale_forcing] = .T. to become effective.  
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#ls_forcing_adv_qv '''ls_forcing_adv_qv''']//
(time,z)
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
none
}}}
{{{#!td
Large­-scale forcing data for the advection tendency of mixing ratio.     
Requires cyclic boundary conditions as well as [wiki:doc/app/initialization_parameters#large_scale_forcing large_scale_forcing] = .T. to become effective.  
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#ls_forcing_left_pt '''ls_forcing_left_pt''']//
(time,z,(x),(y))
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1, 2
}}}
{{{#!td
Boundary condition at left (west) model boundary for the potential temperature.  
Requires [wiki:doc/app/nesting_offl_parameters nesting_offl_parameters] to be enabled to become effective.  
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#ls_forcing_left_qv '''ls_forcing_left_qv''']//
(time,z,(x),(y))
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1, 2
}}}
{{{#!td
Boundary condition at left (west) model boundary for the mixing ratio.  
Requires [wiki:doc/app/nesting_offl_parameters nesting_offl_parameters] to be enabled to become effective.    
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#ls_forcing_left_u '''ls_forcing_left_u''']//
(time,z,(x),(y))
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1, 2
}}}
{{{#!td
Boundary condition at left (west) model boundary for the wind component in x-direction.  
Requires [wiki:doc/app/nesting_offl_parameters nesting_offl_parameters] to be enabled to become effective.     
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#ls_forcing_left_v '''ls_forcing_left_v''']//
(time,z,(x),(y))
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1, 2
}}}
{{{#!td
Boundary condition at left (west) model boundary for the wind component in y-direction.  
Requires [wiki:doc/app/nesting_offl_parameters nesting_offl_parameters] to be enabled to become effective.     
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#ls_forcing_left_w '''ls_forcing_left_w''']//
(time,z,(x),(y))
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1, 2
}}}
{{{#!td
Boundary condition at left (west) model boundary for the wind component in z-direction.  
Requires [wiki:doc/app/nesting_offl_parameters nesting_offl_parameters] to be enabled to become effective.   
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#ls_forcing_right_pt '''ls_forcing_right_pt''']//
(time,z,(x),(y))
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1, 2
}}}
{{{#!td
Boundary condition at right model boundary for the potential temperature.  
Requires [wiki:doc/app/nesting_offl_parameters nesting_offl_parameters] to be enabled to become effective.  
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#ls_forcing_right_qv '''ls_forcing_right_qv''']//
(time,z,(x),(y))
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1, 2
}}}
{{{#!td
Boundary condition at right (east) model boundary for the mixing ratio.  
Requires [wiki:doc/app/nesting_offl_parameters nesting_offl_parameters] to be enabled to become effective.     
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#ls_forcing_right_u '''ls_forcing_right_u''']//
(time,z,(x),(y))
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1, 2
}}}
{{{#!td
Boundary condition at right (east) model boundary for the wind component in x-direction.  
Requires [wiki:doc/app/nesting_offl_parameters nesting_offl_parameters] to be enabled to become effective.    
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#ls_forcing_right_v '''ls_forcing_right_v''']//
(time,z,(x),(y))
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1, 2
}}}
{{{#!td
Boundary condition at right (east) model boundary for the wind component in y-direction.  
Requires [wiki:doc/app/nesting_offl_parameters nesting_offl_parameters] to be enabled to become effective.      
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#ls_forcing_right_w '''ls_forcing_right_w''']//
(time,z,(x),(y))
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1, 2
}}}
{{{#!td
Boundary condition at right (east) model boundary for the wind component in z-direction.  
Requires [wiki:doc/app/nesting_offl_parameters nesting_offl_parameters] to be enabled to become effective.  
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#ls_forcing_south_pt '''ls_forcing_south_pt''']//
(time,z,(x),(y))
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1, 2
}}}
{{{#!td
Boundary condition at front (south) model boundary for the potential temperature.  
Requires [wiki:doc/app/nesting_offl_parameters nesting_offl_parameters] to be enabled to become effective.   
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#ls_forcing_south_qv '''ls_forcing_south_qv''']//
(time,z,(x),(y))
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1, 2
}}}
{{{#!td
Boundary condition at front (south) model boundary for the mixing ratio.  
Requires [wiki:doc/app/nesting_offl_parameters nesting_offl_parameters] to be enabled to become effective.    
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#ls_forcing_south_u '''ls_forcing_south_u''']//
(time,z,(x),(y))
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1, 2
}}}
{{{#!td
Boundary condition at front (south) model boundary for the wind component in x-direction.  
Requires [wiki:doc/app/nesting_offl_parameters nesting_offl_parameters] to be enabled to become effective.    
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#ls_forcing_south_v '''ls_forcing_south_v''']//
(time,z,(x),(y))
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1, 2
}}}
{{{#!td
Boundary condition at front (south) model boundary for the wind component in y-direction.  
Requires [wiki:doc/app/nesting_offl_parameters nesting_offl_parameters] to be enabled to become effective.   
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#ls_forcing_south_w '''ls_forcing_south_w''']//
(time,z,(x),(y))
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1, 2
}}}
{{{#!td
Boundary condition at front (south) model boundary for the wind component in z-direction.  
Requires [wiki:doc/app/nesting_offl_parameters nesting_offl_parameters] to be enabled to become effective.    
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#ls_forcing_north_pt '''ls_forcing_north_pt''']//
(time,z,(x),(y))
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1, 2
}}}
{{{#!td
Boundary condition at back (north) model boundary for the potential temperature.  
Requires [wiki:doc/app/nesting_offl_parameters nesting_offl_parameters] to be enabled to become effective.   
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#ls_forcing_north_qv '''ls_forcing_north_qv''']//
(time,z,(x),(y))
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1, 2
}}}
{{{#!td
Boundary condition at back (north) model boundary for the mixing ratio.  
Requires [wiki:doc/app/nesting_offl_parameters nesting_offl_parameters] to be enabled to become effective.      
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#ls_forcing_north_u '''ls_forcing_north_u''']//
(time,z,(x),(y))
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1, 2
}}}
{{{#!td
Boundary condition at back (north) model boundary for the wind component in x-direction.  
Requires [wiki:doc/app/nesting_offl_parameters nesting_offl_parameters] to be enabled to become effective.     
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#ls_forcing_north_v '''ls_forcing_north_v''']//
(time,z,(x),(y))
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1, 2
}}}
{{{#!td
Boundary condition at back (north) model boundary for the wind component in y-direction.  
Requires [wiki:doc/app/nesting_offl_parameters nesting_offl_parameters] to be enabled to become effective.  
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#ls_forcing_north_w '''ls_forcing_north_w''']//
(time,z,(x),(y))
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1, 2
}}}
{{{#!td
Boundary condition at back (north) model boundary for the wind component in z-direction.  
Requires [wiki:doc/app/nesting_offl_parameters nesting_offl_parameters] to be enabled to become effective.  
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#ls_forcing_top_pt '''ls_forcing_top_pt''']//
(time,(x),(y))
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1, 2
}}}
{{{#!td
Boundary condition at top model boundary for the potential temperature.  
Requires [wiki:doc/app/nesting_offl_parameters nesting_offl_parameters] to be enabled to become effective.  
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#ls_forcing_top_qv '''ls_forcing_top_qv''']//
(time,(x),(y))
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1, 2
}}}
{{{#!td
Boundary condition at top model boundary for the mixing ratio.  
Requires [wiki:doc/app/nesting_offl_parameters nesting_offl_parameters] to be enabled to become effective.     
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#ls_forcing_top_u '''ls_forcing_top_u''']//
(time,(x),(y))
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1, 2
}}}
{{{#!td
Boundary condition at top model boundary for the wind component in x-direction.  
Requires [wiki:doc/app/nesting_offl_parameters nesting_offl_parameters] to be enabled to become effective.    
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#ls_forcing_top_v '''ls_forcing_top_v''']//
(time,(x),(y))
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1, 2
}}}
{{{#!td
Boundary condition at top model boundary for the wind component in y-direction.  
Requires [wiki:doc/app/nesting_offl_parameters nesting_offl_parameters] to be enabled to become effective.  
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#ls_forcing_top_w '''ls_forcing_top_w''']//
(time,(x),(y))
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1, 2
}}}
{{{#!td
Boundary condition at top model boundary for the wind component in z-direction.  
Requires [wiki:doc/app/nesting_offl_parameters nesting_offl_parameters] to be enabled to become effective.   
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#surface_forcing_shf '''surface_forcing_shf''']//
(time)
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1
}}}
{{{#!td
Large-scale forcing for the surface sensible heat flux.  
Requires [wiki:doc/app/nesting_offl_parameters nesting_offl_parameters] to be enabled to become effective.  
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#surface_forcing_qsws '''surface_forcing_qsws''']//
(time)
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1
}}}
{{{#!td
Large-scale forcing for the surface latent heat flux.  
Requires [wiki:doc/app/nesting_offl_parameters nesting_offl_parameters] to be enabled to become effective.    
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#surface_forcing_pt_surface '''surface_forcing_pt_surface''']//
(time)
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1
}}}
{{{#!td
Large-scale forcing for the surface potential temperature.  
Requires [wiki:doc/app/nesting_offl_parameters nesting_offl_parameters] to be enabled to become effective.   
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#surface_forcing_qv_surface '''surface_forcing_qv_surface''']//
(time)
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1
}}}
{{{#!td
Large-scale forcing for the surface specific humidity.  
Requires [wiki:doc/app/nesting_offl_parameters nesting_offl_parameters] to be enabled to become effective.  
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#surface_forcing_surface_pressure '''surface_forcing_surface_pressure''']//
(time)
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1
}}}
{{{#!td
Large-scale forcing for the surface pressure.  
Requires [wiki:doc/app/nesting_offl_parameters nesting_offl_parameters] to be enabled to become effective.  
}}}

[=#external_rad '''External radiative forcing''']
||='''Input variable'''  =||='''Type'''  =||='''LOD''' =||='''Explanation / Remarks'''  =||
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#rad_lw_in '''rad_lw_in''']//
(time_rad)
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1
}}}
{{{#!td
Longwave downwelling radiation (mandatory if [../../../radiation_parameters#radiation_scheme radiation_scheme ]= 'external').
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#rad_sw_in '''rad_sw_in''']//
(time_rad)
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1
}}}
{{{#!td
Shortwave downwelling radiation (mandatory if [../../../radiation_parameters#radiation_scheme radiation_scheme ]= 'external').
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#rad_sw_in_dif '''rad_sw_in_dif''']//
(time_rad)
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1
}}}
{{{#!td
Shortwave downwelling diffuse radiation, which can be optionally input. In case it is missing, the incoming shortwave radiation will be split into direct and diffuse fractions based on clear-sky assumptions.  
}}}


[=#turb_inflow '''Turbulent inflow (available from Nov 2022 on) ''']
||='''Input variable'''  =||='''Type'''  =||='''LOD''' =||='''Explanation / Remarks'''  =||
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#time_inflow '''time_inflow''']//
(time_inflow)
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
1
}}}
{{{#!td
Time dimension of turbulent inflow data (mandatory if [../../../turbulent_inflow_parameters#turbulent_inflow_method turbulent_inflow_method ]= 'read_from_file').
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#inflow_plane_u '''inflow_plane_u''']//
(time_inflow, z, y )
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
2
}}}
{{{#!td
Inflow boundary data for the u-component (mandatory if [../../../turbulent_inflow_parameters#turbulent_inflow_method turbulent_inflow_method ]= 'read_from_file').
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#inflow_plane_v '''inflow_plane_v''']//
(time_inflow, z, yv )
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
2
}}}
{{{#!td
Inflow boundary data for the v-component (mandatory if [../../../turbulent_inflow_parameters#turbulent_inflow_method turbulent_inflow_method ]= 'read_from_file').
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#inflow_plane_w '''inflow_plane_w''']//
(time_inflow, zw, y )
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
2
}}}
{{{#!td
Inflow boundary data for the w-component (mandatory if [../../../turbulent_inflow_parameters#turbulent_inflow_method turbulent_inflow_method ]= 'read_from_file').
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#inflow_plane_e '''inflow_plane_e''']//
(time_inflow, z, y )
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
2
}}}
{{{#!td
Inflow boundary data for the SGS-TKE (mandatory if [../../../turbulent_inflow_parameters#turbulent_inflow_method turbulent_inflow_method ]= 'read_from_file').
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#inflow_plane_pt '''inflow_plane_pt''']//
(time_inflow, z, y )
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
2
}}}
{{{#!td
Inflow boundary data for the potential temperature (mandatory if [../../../turbulent_inflow_parameters#turbulent_inflow_method turbulent_inflow_method ]= 'read_from_file' and [wiki:doc/app/initialization_parameters#neutral neutral] = .F.).
}}}
|----------------
{{{#!td style="vertical-align:top;width: 150px"
[=#inflow_plane_q '''inflow_plane_q''']//
(time_inflow, z, y )
}}}
{{{#!td style="vertical-align:top;width: 50px"
NC_FLOAT
}}}
{{{#!td style="vertical-align:top;width: 50px"
2
}}}
{{{#!td
Inflow boundary data for the mixing ratio (mandatory if [../../../turbulent_inflow_parameters#turbulent_inflow_method turbulent_inflow_method ]= 'read_from_file' and [wiki:doc/app/initialization_parameters#humidity humidity] = .T.).
}}}


\\\\