Revisions of palm/trunk/SOURCE/disturb_field.f90
https://palm.muk.uni-hannover.de/trac/log/palm/trunk/SOURCE/disturb_field.f90?rev=668
Trac Log - Revisions of palm/trunk/SOURCE/disturb_field.f90en-USTrac 1.0.5PALMhttps://palm.muk.uni-hannover.de/trac/chrome/common/test
https://palm.muk.uni-hannover.de/trac/log/palm/trunk/SOURCE/disturb_field.f90?rev=668
suehringThu, 23 Dec 2010 13:22:58 GMTRevision 668: last commit documented
https://palm.muk.uni-hannover.de/trac/changeset/668/palm/trunk/SOURCE/disturb_field.f90
https://palm.muk.uni-hannover.de/trac/changeset/668/palm/trunk/SOURCE/disturb_field.f90last commit documentedLogsuehringThu, 23 Dec 2010 12:06:00 GMTRevision 667: summary:
--------
Gryschka:
- Coupling with different resolution and ...
https://palm.muk.uni-hannover.de/trac/changeset/667/palm/trunk/SOURCE/disturb_field.f90
https://palm.muk.uni-hannover.de/trac/changeset/667/palm/trunk/SOURCE/disturb_field.f90summary:
--------
Gryschka:
- Coupling with different resolution and different numbers of PEs in
ocean and atmosphere is available
- Exchange of u and v from ocean surface to atmosphere surface
- Mirror boundary condition for u and v at the bottom are replaced
by dirichlet boundary conditions
- Inflow turbulence is now defined by flucuations around spanwise mean
- Bugfixes for cyclic_fill and constant_volume_flow
Suehring:
- New advection added ( Wicker and Skamarock 5th order ), therefore:
- New module advec_ws.f90
- Modified exchange of ghost boundaries.
- Modified evaluation of turbulent fluxes
- New index bounds nxlg, nxrg, nysg, nyng
advec_ws.f90
------------
Advection scheme for scalars and momentum using the flux formulation of
Wicker and Skamarock 5th order.
Additionally the module contains of a routine using for initialisation and
steering of the statical evaluation. The computation of turbulent fluxes takes
place inside the advection routines.
In case of vector architectures Dirichlet and Radiation boundary conditions are
outstanding and not available. Furthermore simulations within topography are
not possible so far. A further routine local_diss_ij is available and is used
if a control of dissipative fluxes is desired.
check_parameters.f90
--------------------
Exchange of parameters between ocean and atmosphere via PE0
Check for illegal combination of ws-scheme and timestep scheme.
Check for topography and ws-scheme.
Check for not cyclic boundary conditions in combination with ws-scheme and
loop_optimization = 'vector'.
Check for call_psolver_at_all_substeps and ws-scheme for momentum_advec.
Different processor/grid topology in atmosphere and ocean is now allowed!
Bugfixes in checking for conserve_volume_flow_mode.
exchange_horiz.f90
------------------
Dynamic exchange of ghost points with nbgp_local to ensure that no useless
ghost points exchanged in case of multigrid. type_yz(0) and type_xz(0) used for
normal grid, the remaining types used for the several grid levels.
Exchange is done via MPI-Vectors with a dynamic value of ghost points which
depend on the advection scheme. Exchange of left and right PEs is 10% faster
with MPI-Vectors than without.
flow_statistics.f90
-------------------
When advection is computed with ws-scheme, turbulent fluxes are already
computed in the respective advection routines and buffered in arrays
sums_xxxx_ws_l(). This is due to a consistent treatment of statistics
with the numerics and to avoid unphysical kinks near the surface. So some if-
requests has to be done to dicern between fluxes from ws-scheme other advection
schemes. Furthermore the computation of z_i is only done if the heat flux
exceeds a minimum value. This affects only simulations of a neutral boundary
layer and is due to reasons of computations in the advection scheme.
inflow_turbulence.f90
---------------------
Using nbgp recycling planes for a better resolution of the turbulent flow near
the inflow.
init_grid.f90
-------------
Definition of new array bounds nxlg, nxrg, nysg, nyng on each PE.
Furthermore the allocation of arrays and steering of loops is done with these
parameters. Call of exchange_horiz are modified.
In case of dirichlet bounday condition at the bottom zu(0)=0.0
dzu_mg has to be set explicitly for a equally spaced grid near bottom.
ddzu_pres added to use a equally spaced grid near bottom.
init_pegrid.f90
---------------
Moved determination of target_id's from init_coupling
Determination of parameters needed for coupling (coupling_topology, ngp_a, ngp_o)
with different grid/processor-topology in ocean and atmosphere
Adaption of ngp_xy, ngp_y to a dynamic number of ghost points.
The maximum_grid_level changed from 1 to 0. 0 is the normal grid, 1 to
maximum_grid_level the grids for multigrid, in which 0 and 1 are normal grids.
This distinction is due to reasons of data exchange and performance for the
normal grid and grids in poismg.
The definition of MPI-Vectors adapted to a dynamic numer of ghost points.
New MPI-Vectors for data exchange between left and right boundaries added.
This is due to reasons of performance (10% faster).
ATTENTION: nnz_x undefined problem still has to be solved!!!!!!!!
TEST OUTPUT (TO BE REMOVED) logging mpi2 ierr values
parin.f90
---------
Steering parameter dissipation_control added in inipar.
Makefile
--------
Module advec_ws added.
Modules
--------
Removed u_nzb_p1_for_vfc and v_nzb_p1_for_vfc
For coupling with different resolution in ocean and atmophere:
+nx_a, +nx_o, ny_a, +ny_o, ngp_a, ngp_o, +total_2d_o, +total_2d_a,
+coupling_topology
Buffer arrays for the left sided advective fluxes added in arrays_3d.
+flux_s_u, +flux_s_v, +flux_s_w, +diss_s_u, +diss_s_v, +diss_s_w,
+flux_s_pt, +diss_s_pt, +flux_s_e, +diss_s_e, +flux_s_q, +diss_s_q,
+flux_s_sa, +diss_s_sa
3d arrays for dissipation control added. (only necessary for vector arch.)
+var_x, +var_y, +var_z, +gamma_x, +gamma_y, +gamma_z
Default of momentum_advec and scalar_advec changed to 'ws-scheme' .
+exchange_mg added in control_parameters to steer the data exchange.
Parameters +nbgp, +nxlg, +nxrg, +nysg, +nyng added in indices.
flag array +boundary_flags added in indices to steer the degradation of order
of the advective fluxes when non-cyclic boundaries are used.
MPI-datatypes +type_y, +type_y_int and +type_yz for data_exchange added in
pegrid.
+sums_wsus_ws_l, +sums_wsvs_ws_l, +sums_us2_ws_l, +sums_vs2_ws_l,
+sums_ws2_ws_l, +sums_wspts_ws_l, +sums_wssas_ws_l, +sums_wsqs_ws_l
and +weight_substep added in statistics to steer the statistical evaluation
of turbulent fluxes in the advection routines.
LOGICALS +ws_scheme_sca and +ws_scheme_mom added to get a better performance
in prognostic_equations.
LOGICAL +dissipation_control control added to steer numerical dissipation
in ws-scheme.
Changed length of string run_description_header
pres.f90
--------
New allocation of tend when ws-scheme and multigrid is used. This is due to
reasons of perforance of the data_exchange. The same is done with p after
poismg is called.
nxl-1, nxr+1, nys-1, nyn+1 replaced by nxlg, nxrg, nysg, nyng when no
multigrid is used. Calls of exchange_horiz are modified.
bugfix: After pressure correction no volume flow correction in case of
non-cyclic boundary conditions
(has to be done only before pressure correction)
Call of SOR routine is referenced with ddzu_pres.
prognostic_equations.f90
--------
Calls of the advection routines with WS5 added.
Calls of ws_statistics added to set the statistical arrays to zero after each
time step.
advec_particles.f90
-------------------
Declaration of de_dx, de_dy, de_dz adapted to additional ghost points.
Furthermore the calls of exchange_horiz were modified.
asselin_filter.f90
------------------
nxl-1, nxr+1, nys-1, nyn+1 replaced by nxlg, nxrg, nysg, nyng
average_3d_data.f90
-------------------
nxl-1, nxr+1, nys-1, nyn+1 replaced by nxlg, nxrg, nysg, nyng
boundary_conds.f90
------------------
nxl-1, nxr+1, nys-1, nyn+1 replaced by nxlg, nxrg, nysg, nyng
Removed mirror boundary conditions for u and v at the bottom in case of
ibc_uv_b == 0. Instead, dirichelt boundary conditions (u=v=0) are set
in init_3d_model
calc_liquid_water_content.f90
-----------------------------
nxl-1, nxr+1, nys-1, nyn+1 replaced by nxlg, nxrg, nysg, nyng
calc_spectra.f90
----------------
nxl-1, nxr+1, nys-1, nyn+1 replaced by nxlg, nxrg, nysg, nyng for
allocation of tend.
check_open.f90
--------------
Output of total array size was adapted to nbgp.
data_output_2d.f90
------------------
nxl-1, nxr+1, nys-1, nyn+1 replaced by nxlg, nxrg, nysg, nyng in loops and
allocation of arrays local_2d and total_2d.
Calls of exchange_horiz are modified.
data_output_2d.f90
------------------
nxl-1, nxr+1, nys-1, nyn+1 replaced by nxlg, nxrg, nysg, nyng in loops and
allocation of arrays. Calls of exchange_horiz are modified.
Skip-value skip_do_avs changed to a dynamic adaption of ghost points.
data_output_mask.f90
------------------
Calls of exchange_horiz are modified.
diffusion_e.f90
-----------------------------
nxl-1, nxr+1, nys-1, nyn+1 replaced by nxlg, nxrg, nysg, nyng
diffusion_s.f90
-----------------------------
nxl-1, nxr+1, nys-1, nyn+1 replaced by nxlg, nxrg, nysg, nyng
diffusion_u.f90
-----------------------------
nxl-1, nxr+1, nys-1, nyn+1 replaced by nxlg, nxrg, nysg, nyng
diffusion_v.f90
-----------------------------
nxl-1, nxr+1, nys-1, nyn+1 replaced by nxlg, nxrg, nysg, nyng
diffusion_w.f90
-----------------------------
nxl-1, nxr+1, nys-1, nyn+1 replaced by nxlg, nxrg, nysg, nyng
diffusivities.f90
-----------------
nxl-1, nxr+1, nys-1, nyn+1 replaced by nxlg, nxrg, nysg, nyng
diffusivities.f90
-----------------------------
nxl-1, nxr+1, nys-1, nyn+1 replaced by nxlg, nxrg, nysg, nyng.
Calls of exchange_horiz are modified.
exchange_horiz_2d.f90
---------------------
Dynamic exchange of ghost points with nbgp, which depends on the advection
scheme. Exchange between left and right PEs is now done with MPI-vectors.
global_min_max.f90
------------------
Adapting of the index arrays, because MINLOC assumes lowerbound
at 1 and not at nbgp.
init_3d_model.f90
-----------------
nxl-1, nxr+1, nys-1, nyn+1 replaced by nxlg, nxrg, nysg, nyng in loops and
allocation of arrays. Calls of exchange_horiz are modified.
Call ws_init to initialize arrays needed for statistical evaluation and
optimization when ws-scheme is used.
Initial volume flow is now calculated by using the variable hom_sum.
Therefore the correction of initial volume flow for non-flat topography
removed (removed u_nzb_p1_for_vfc and v_nzb_p1_for_vfc)
Changed surface boundary conditions for u and v in case of ibc_uv_b == 0 from
mirror bc to dirichlet boundary conditions (u=v=0), so that k=nzb is
representative for the height z0
Bugfix: type conversion of '1' to 64bit for the MAX function (ngp_3d_inner)
init_coupling.f90
-----------------
determination of target_id's moved to init_pegrid
init_pt_anomaly.f90
-----------------
Call of exchange_horiz are modified.
init_rankine.f90
-----------------
nxl-1, nxr+1, nys-1, nyn+1 replaced by nxlg, nxrg, nysg, nyng.
Calls of exchange_horiz are modified.
init_slope.f90
-----------------
nxl-1, nxr+1, nys-1, nyn+1 replaced by nxlg, nxrg, nysg, nyng.
header.f90
------------------
Output of advection scheme.
poismg.f90
----------
Calls of exchange_horiz are modified.
prandtl_fluxes.f90
------------------
Changed surface boundary conditions for u and v from mirror bc to dirichelt bc,
therefore u(uzb,:,:) and v(nzb,:,:) is now representative for the height z0
nxl-1, nxr+1, nys-1, nyn+1 replaced by nxlg, nxrg, nysg, nyng
production_e.f90
--------
nxl-1, nxr+1, nys-1, nyn+1 replaced by nxlg, nxrg, nysg, nyng
read_3d_binary.f90
--------
+/- 1 replaced with +/- nbgp when swapping and allocating variables.
sor.f90
--------
nxl-1, nxr+1, nys-1, nyn+1 replaced by nxlg, nxrg, nysg, nyng.
Call of exchange_horiz are modified.
bug removed in declaration of ddzw(), nz replaced by nzt+1
subsidence.f90
--------
nxl-1, nxr+1, nys-1, nyn+1 replaced by nxlg, nxrg, nysg, nyng.
sum_up_3d_data.f90
--------
nxl-1, nxr+1, nys-1, nyn+1 replaced by nxlg, nxrg, nysg, nyng.
surface_coupler.f90
-------------------
nxl-1, nxr+1, nys-1, nyn+1 replaced by nxlg, nxrg, nysg, nyng in
MPI_SEND() and MPI_RECV.
additional case for nonequivalent processor and grid topopolgy in ocean and
atmosphere added (coupling_topology = 1)
Added exchange of u and v from Ocean to Atmosphere
time_integration.f90
--------------------
Calls of exchange_horiz are modified.
Adaption to slooping surface.
timestep.f90
------------
nxl-1, nxr+1, nys-1, nyn+1 replaced by nxlg, nxrg, nysg, nyng.
user_3d_data_averaging.f90, user_data_output_2d.f90, user_data_output_3d.f90,
user_actions.f90, user_init.f90, user_init_plant_canopy.f90
--------
nxl-1, nxr+1, nys-1, nyn+1 replaced by nxlg, nxrg, nysg, nyng.
user_read_restart_data.f90
--------
Allocation with nbgp.
wall_fluxes.f90
--------
nxl-1, nxr+1, nys-1, nyn+1 replaced by nxlg, nxrg, nysg, nyng.
write_compressed.f90
--------
Array bounds and nx, ny adapted with nbgp.
sor.f90
--------
bug removed in declaration of ddzw(), nz replaced by nzt+1LograaschFri, 05 Feb 2010 07:36:54 GMTRevision 484: typo in file headers removed
https://palm.muk.uni-hannover.de/trac/changeset/484/palm/trunk/SOURCE/disturb_field.f90
https://palm.muk.uni-hannover.de/trac/changeset/484/palm/trunk/SOURCE/disturb_field.f90typo in file headers removedLograaschFri, 05 Feb 2010 06:37:03 GMTRevision 482: New:
---
compare_palm_logs is additionally compiled with mbuild -u ...
https://palm.muk.uni-hannover.de/trac/changeset/482/palm/trunk/SOURCE/disturb_field.f90
https://palm.muk.uni-hannover.de/trac/changeset/482/palm/trunk/SOURCE/disturb_field.f90New:
---
compare_palm_logs is additionally compiled with mbuild -u (Makefile in trunk/UTIL)
make options (mopts) to be set by configuration file implemented (mrun, mbuild)
humidity=.T. is now usable for runs with topography. wall_humidityflux and
wall_scalarflux are the corresponding new parin arrays.
(check_parameters, init_3d_model, parin)
Large scale vertical motion (subsidence/ascent) can be applied to the
prognostic equation for the potential temperature. (check_parameters, header,
Makefile, modules, parin, prognostic_equations, read_var_list, subsidence,
write_var_list)
A simple method for installing and running palm (with limited features)
has been added. (Makefile, palm_simple_install, palm_simple_run)
Changed:
-------
2d-decomposition is default for Cray-XT machines (init_pegrid)
var_ts is replaced by dots_max (modules,init_3d_model)
Every cloud droplet has now an own weighting factor and can be deleted due to
collisions. Condensation and collision of cloud droplets are adjusted
accordingly. (advec_particles)
Collision efficiency for large cloud droplets has changed according to table of
Rogers and Yau. (collision_efficiency)
Errors:
------
Bugfix for generating serial jobs (subjob)
Bugfix: index problem concerning gradient_level indices removed (header)
Dimension of array stat in cascade change to prevent type problems with
mpi2 libraries (poisfft_hybrid)
Loop was split to make runs reproducible when using ifort compiler.
(disturb_field)
Bugfix: exchange of ghost points for prho included (time_integration)
Bugfix: calculation of time-averaged surface heatfluxes (sum_up_3d_data)
Bugfix: calculation of precipitation_rate (calc_precipitation)
Bugfix: initial data assignments to some dvrp arrays changed due to error
messages from gfortran compiler (modules)
Bugfix: calculation of cloud droplet velocity (advec_particles)
Bugfix: transfer of particles at south/left edge (advec_particles)
Bugfix: calculation of collision_efficiency (collision_efficiency)
Bugfix: initialisation of var_mod (subsidence)LogfrankeWed, 13 Jan 2010 15:10:53 GMTRevision 420: collision of cloud droplets has changed in advec_particles
bugfixes in ...
https://palm.muk.uni-hannover.de/trac/changeset/420/palm/trunk/SOURCE/disturb_field.f90
https://palm.muk.uni-hannover.de/trac/changeset/420/palm/trunk/SOURCE/disturb_field.f90collision of cloud droplets has changed in advec_particles
bugfixes in advec_particles and collision_efficiency
change in disturb_field to make runs reproducible on HLRNLograaschThu, 29 Mar 2007 04:26:56 GMTRevision 77: New:
---
particle reflection from vertical walls implemented, ...
https://palm.muk.uni-hannover.de/trac/changeset/77/palm/trunk/SOURCE/disturb_field.f90
https://palm.muk.uni-hannover.de/trac/changeset/77/palm/trunk/SOURCE/disturb_field.f90New:
---
particle reflection from vertical walls implemented, particle SGS model adjusted to walls
Wall functions for vertical walls now include diabatic conditions. New subroutines wall_fluxes, wall_fluxes_e. New 4D-array rif_wall.
new d3par-parameter netcdf_64bit_3d to switch on 64bit offset only for 3D files
new d3par-parameter dt_max to define the maximum value for the allowed timestep
new inipar-parameter loop_optimization to control the loop optimization method
new inipar-parameter pt_refrence. If given, this value is used as the reference that in buoyancy terms (otherwise, the instantaneous horizontally averaged temperature is used).
new user interface user_advec_particles
new initializing action "by_user" calls user_init_3d_model and allows the initial setting of all 3d arrays
topography height informations are stored on arrays zu_s_inner and zw_w_inner and output to the 2d/3d NetCDF files
samples added to the user interface which show how to add user-define time series quantities.
calculation/output of precipitation amount, precipitation rate and z0 (by setting "pra*", "prr*", "z0*" with data_output). The time interval on which the precipitation amount is defined is set by new d3par-parameter precipitation_amount_interval
unit 9 opened for debug output (file DEBUG_<pe#>)
Makefile, advec_particles, average_3d_data, buoyancy, calc_precipitation, check_open, check_parameters, data_output_2d, diffusion_e, diffusion_u, diffusion_v, diffusion_w, diffusivities, header, impact_of_latent_heat, init_particles, init_3d_model, modules, netcdf, parin, production_e, read_var_list, read_3d_binary, sum_up_3d_data, user_interface, write_var_list, write_3d_binary
New: wall_fluxes
Changed:
-------
General revision of non-cyclic horizontal boundary conditions: radiation boundary conditions are now used instead of Neumann conditions at the outflow (calculation needs velocity values for t-dt, which are stored on new arrays u_m_l, u_m_r, etc.), calculation of mean outflow is not needed any more, volume flow control is added for the outflow boundary (currently only for the north boundary!!), additional gridpoints along x and y (uxrp, vynp) are not needed any more, routine "boundary_conds" now operates on timelevel t+dt and is not split in two parts (main, uvw_outflow) any more, Neumann boundary conditions at inflow/outflow in case of non-cyclic boundary conditions for all 2d-arrays that are handled by exchange_horiz_2d
The FFT-method for solving the Poisson-equation is now working with Neumann boundary conditions both at the bottom and the top. This requires adjustments of the tridiagonal coefficients and subtracting the horizontally averaged mean from the vertical velocity field.
+age_m in particle_type
Particles-package is now part of the default code ("-p particles" is not needed any more).
Move call of user_actions( 'after_integration' ) below increment of times
and counters. user_actions is now called for each statistic region and has as an argument the number of the respective region (sr)
d3par-parameter data_output_ts removed. Timeseries output for "profil" removed. Timeseries are now switched on by dt_dots. Timeseries data is collected in flow_statistics.
Initial velocities at nzb+1 are regarded for volume flow control in case they have been set zero before (to avoid small timesteps); see new internal parameters u/v_nzb_p1_for_vfc.
q is not allowed to become negative (prognostic_equations).
poisfft_init is only called if fft-solver is switched on (init_pegrid).
d3par-parameter moisture renamed to humidity.
Subversion global revision number is read from mrun and added to the run description header and to the run control (_rc) file.
<span class="underline">vtk directives removed from main program.
The uitility routine interpret_config reads PALM environment variables from NAMELIST instead using the system call GETENV.
advec_u_pw, advec_u_up, advec_v_pw, advec_v_up, asselin_filter, check_parameters, coriolis, data_output_dvrp, data_output_ptseries, data_output_ts, data_output_2d, data_output_3d, diffusion_u, diffusion_v, exchange_horiz, exchange_horiz_2d, flow_statistics, header, init_grid, init_particles, init_pegrid, init_rankine, init_pt_anomaly, init_1d_model, init_3d_model, modules, palm, package_parin, parin, poisfft, poismg, prandtl_fluxes, pres, production_e, prognostic_equations, read_var_list, read_3d_binary, sor, swap_timelevel, time_integration, write_var_list, write_3d_binary
Errors:
------
Bugfix: preset of tendencies te_em, te_um, te_vm in init_1d_model
Bugfix in sample for reading user defined data from restart file (user_init)
Bugfix in setting diffusivities for cases with the outflow damping layer extending over more than one subdomain (init_3d_model)
Check for possible negative humidities in the initial humidity profile.
in Makefile, default suffixes removed from the suffix list to avoid calling of m2c in
# case of .mod files
Makefile
check_parameters, init_1d_model, init_3d_model, user_interface</span>LograaschThu, 22 Mar 2007 09:54:05 GMTRevision 75: preliminary update for changes concerning non-cyclic boundary conditions
https://palm.muk.uni-hannover.de/trac/changeset/75/palm/trunk/SOURCE/disturb_field.f90
https://palm.muk.uni-hannover.de/trac/changeset/75/palm/trunk/SOURCE/disturb_field.f90preliminary update for changes concerning non-cyclic boundary conditionsLograaschTue, 13 Feb 2007 11:33:16 GMTRevision 4: Id keyword set as property for all *.f90 files
https://palm.muk.uni-hannover.de/trac/changeset/4/palm/trunk/SOURCE/disturb_field.f90
https://palm.muk.uni-hannover.de/trac/changeset/4/palm/trunk/SOURCE/disturb_field.f90Id keyword set as property for all *.f90 filesLograaschTue, 13 Feb 2007 11:30:58 GMTRevision 3: RCS Log replace by Id keyword, revision history cleaned up
https://palm.muk.uni-hannover.de/trac/changeset/3/palm/trunk/SOURCE/disturb_field.f90
https://palm.muk.uni-hannover.de/trac/changeset/3/palm/trunk/SOURCE/disturb_field.f90RCS Log replace by Id keyword, revision history cleaned upLograaschMon, 12 Feb 2007 11:58:02 GMTRevision 1: Initial repository layout and content
https://palm.muk.uni-hannover.de/trac/changeset/1/palm/trunk/SOURCE/disturb_field.f90
https://palm.muk.uni-hannover.de/trac/changeset/1/palm/trunk/SOURCE/disturb_field.f90Initial repository layout and contentLog