#!/bin/ksh
# mrun - script for running PALM jobs
# $Id: mrun 670 2010-12-26 19:11:05Z heinze $

     # Procedure for interactive/batch PALM runs (initial runs and automatic
     # restart runs)

     # Last changes:
     # 03/03/94 - Siggi - Entwicklungsbeginn
     # 21/03/94 - Siggi - Entwicklungsabschluss (Version 1.0)
     # 09/12/94 - Siggi - allexport unterbunden; statt dessen werden jetzt ein-
     #                    zelne Variable exportiert. Dies ist noetig, weil an-
     #                    sonsten irgendein Speicher ueberlaeuft und von mrun
     #                    aufgerufene Programme (z.B. stageout) mit Fehlern
     #                    abbrechen (too many arguments)
     # 20/06/95 - Siggi - noclobber muss explizit abgeschaltet, da jetzt
     #                    defaultmaessig im RRZN-Profile eingeschaltet
     # 10/06/97 - Siggi - Zusaetzliche Option -C bei cpp, damit // nicht
     #                    wegfallen
     # 25/04/00 - Siggi - Version 1.5
     #                    remote_addres und remote_user in return_addres bzw.
     #                    return_username umbenannt, return_username wird dem
     #                    mrun-Aufruf im Job ueber Option -U mitgegeben.
     #                    Neue Variable remote_username, die beim interaktiven
     #                    mrun-Aufruf zwingend ueber die neue Option -u oder
     #                    in der Konfigurationsdatei angegeben werden muss.
     # 08/02/01 - Siggi - Alle mrun-Meldungen ins englische uebersetzt,
     #                    Version 1.7
     # 05/05/02 - Siggi - Uebersetzungen mittels make-Mechanismus moeglich
     # 21/11/02 - Siggi - ENV-Variable XLFRTEOPTS wird vor Ausfuehrung auf
     #                    IBM gesetzt, um Record-Laenge der NAMELIST-Dateien,
     #                    zu bestimmen; Praeprozessoroptionen haben nun alle
     #                    die Form -Dtext=text, weil auf IBM sonst text durch
     #                    die leere Zeichenkette ersetzt wird
     # 01/08/03 - Siggi  - Test of implementing dvrp+1PE on ibm
     # 07/01/04 - Siggi  - additional preprocessor directive for ibm included
     #                     (-D$OMP=OMP) in order to avoid problems with
     #                     OMP_NUM_THREADS
     # 04/01/05 - Siggi  - archiving on hanni and berni is done in separate
     #                     tar files, one for each node used
     # 07/01/04 - Siggi  - old code for t3e, vpp and hpcs eliminated
     # 09/01/05 - Siggi  - workaround for getting the IP address on gfdl3
     # 17/01/05 - Siggi  - job for data transfer to local machine now within
     #                     job class c1 (HLRN)
     # 27/01/05 - Siggi  - IP address workaround for gfdl3 removed
     # 28/01/05 - Siggi  - tar-filenames on $PERM (HLRN) now include the
     #                     base filename and cycle number
     # 16/02/05 - Gerald - hababai validated
     # 14/03/05 - Siggi  - abort on NEC after first runtime error (F_ERRCNT)
     # 29/03/05 - Marcus - berni*-en0 validated
     # 21/04/05 - Siggi  - transfer-job-protocol for avs-data is no more stored
     # 24/04/05 - Siggi  - netcdf support on lcmuk
     # 25/04/05 - Siggi  - netcdf support on gfld3 (decalpha)
     # 11/05/05 - Siggi  - files with non-numeric extensions (.xxx after cycle
     #                     number) can now be used within interactive runs
     # 12/05/05 - Siggi  - netcdf support on ibm
     # 13/05/05 - Siggi  - error in tar-filenames on $PERM (HLRN) removed
     # 18/05/05 - Siggi  - netcdf support on nec
     # 24/05/05 - Siggi  - netcdf support on ibms
     # 14/06/05 - Siggi  - sleep interval after submit of restart job increased
     #                     to 30 seconds
     # 28/06/05 - Siggi  - bora adjusted to new intel compiler (LD_LIBRARY_
     #                     PATH is temporarily set)
     # 07/09/05 - Siggi  - setting of MP_EAGER_LIMIT switched off because it
     #                     caused warnings in the job protocol
     # 20/10/05 - Siggi  - update of netcdf-version on decalpha (gfdl3)
     # 25/10/05 - Siggi  - error in listing files for getting the cycle number
     #                     removed
     # 26/10/05 - Siggi  - new paths for dvrp-library, transfer of catalogs
     #                     realized by file attribute trpe
     # 28/10/05 - Siggi  - if existing, the file extension is output in case
     #                     of missing input file - no job abort in case of
     #                     missing input files with file extensions
     #                     (preliminary solution)
     # 31/10/05 - Siggi  - data transfer from nech now within seperate job
     # 04/11/05 - Siggi  - netcdf 3.6.0-p1 on ibmh/ibmb
     # 07/12/05 - Siggi  - gallego and elephanta admitted
     # 30/12/05 - Siggi  - gfdl5 (ibmy) admitted
     # 10/01/06 - Siggi  - cpp directive for NetCDF 64bit support
     # 20/01/06 - Siggi  - cpp directive for ibmy
     # 09/02/06 - Siggi  - ibmy admitted for batch mode
     # 13/04/06 - Siggi  - ostria admitted
     # 18/04/06 - Siggi  - usage of OpenMP implemented (additional option -O)
     # 10/05/06 - Siggi  - environment variable XLSMPOPTS set on IBM for
     #                     optimization of OpenMP runs (option stacksize is
     #                     necessary for large gridpoint numbers because
     #                     otherwise a segmentation fault occurs)
     # 23/05/05 - Siggi  - lctit (SUN Fire X4600) admitted
     # 21/08/06 - Siggi  - standard mrun path on scirocco is as on bora
     # 23/08/06 - Siggi  - netcdf support for scirocco (notebook)
     # 20/09/06 - Marcus - add DVRP library on nech
     # 24/10/06 - Siggi  - Environment variables for PALM steering are written
     #                     on local NAMELIST file ENVPAR
     # 24/11/06 - Siggi  - levanto admitted, maestro switched to ifc 9.1
     # 28/11/06 - Siggi  - call to interpret_config.x_levanto because of SuSe 10
     # 06/02/07 - Siggi  - add DVRP library on lcmuk
     # 07/02/07 - Siggi  - revision of source code handling, source code is
     #                     now expected in directory given by source_path and
     #                     not in the current working directory, source code
     #                     files provided in add_source_path are allways
     #                     compiled, source code to be compiled is allways
     #                     sampled in SOURCES_FOR_RUN_$fname which is a
     #                     subdirectory of the current working directory,
     #                     -s TEST  changed to  -s WRITE_PERMIT  or -s WP,
     #                     adapted for RIAM (neck)
     #                     bugfix for cycle number of output file (extout)
     #                     all hpmuk-related code removed
     # 14/02/07 - Siggi  - dvrp support for neck added
     # 28/02/07 - Siggi  - empty lines in configuration file are accepted
     #                     mrun_path replaced by PALM_BIN,
     #                     all machines are calling interpret_config.x
     # 14/03/07 - Siggi  - fimm admitted, revision number added to terminal
     #                     output
     # 16/03/07 - Siggi  - adjustments for lctit
     # 29/03/07 - Siggi  - global revision transfered to batch job by new
     #                     option -G
     # 30/03/07 - Siggi  - compilation "by hand" removed, cpp-directives/options
     #                     + netcdf/dvrp-options are read from configuration
     #                     file, host identifier (local_host) is read from
     #                     config file, code related to ftp filetransfer
     #                     removed (incl. option -f)
     # 19/06/07 - Siggi  - time limit for cdata jobs increased
     # 25/07/07 - Siggi  - two sets of executables can be started on lcmuk,
     #                     if new option -Y (coupling) is given,
     #                     output of executables to aout_output removed,
     #                     messages are immediately written to stdout instead
     # 03/08/07 - Marcus - add XOPT="-X $numprocs" for lcfimm
     # 09/08/07 - Marcus - workaround on lcfimm to propagate environment 
     #                     variables out to the nodes in coupled mode -disabled-
     # 13/08/07 - Marcus - start local restart jobs per ssh on lcfimm
     # 28/08/07 - Marcus - completely remove workaround on lcfimm to propagate
     #                     environment variables out to the nodes in coupled mode
     # 15/10/07 - Siggi  - Preliminary adjustments for lctit, based on Jin's
     #                     suggestions
     # 19/10/07 - Marcus - further adjustments for lctit: add new optional 
     #                     argument -g group_number, admit all sla* node_usage 
     #                     queues
     # 30/10/07 - Marcus - further adjustments for queues on lctit
     # 14/02/08 - Bjoern - link of restart files with long file name possible
     # 28/02/08 - Marcus - If environment variable link_local_output is set to 
     #                     true, mrun tries "ln -f" on local output and resorts 
     #                     to "cp" or "cp -r" on error
     # 15/04/08 - Siggi  - argument -c introduced to most of the subjob calls,
     #                     which allows the user to choose his own job catalog
     #                     by setting job_catalog in the configuration file
     #                     (default is ~/job_queue),
     #                     workaround for mpiexec with -env option,
     #                     adjustments for lcxt4 (Bergen Center for Computational
     #                     Science)
     # 22/05/08 - Marcus - If environment variable link_local_input is set to 
     #                     true, mrun tries "ln -f" on local input and resorts 
     #                     to "cp" or "cp -r" on error
     # 27/05/08 - Siggi  - PATH is set to PALM_BIN everywhere (missing so far)
     # 14/07/08 - Siggi  - adjustments for lcsgih
     # 08/08/08 - Marcus - typo removed in lcxt4 branch
     # 17/09/08 - Siggi  - restart mechanism adjusted for lcsgi
     # 02/10/08 - BjornM - argument "-Y" modified, adjustments for coupled runs
     # 21/10/08 - Siggi  - bugfix for the case that -K has more than one
     #                     argument
     # 08/11/08 - Siggi  - bugfix for depository path settings in configuration
     #                     file
     # 11/11/08 - Siggi  - rules for using user code files changed: user
     #                     code splitted into one file per subroutine,
     #                     user can provide his/her own makefile, only
     #                     default source-code filenames are allowed
     # 14/11/08 - Siggi  - cond1 and cond2 are part of the depository name
     # 08/01/09 - Siggi  - mpi module on sgi machines to be used can be set
     #                     with environment variable mpilib
     # 13/01/09 - Siggi  - totalview on hice/bice can be used in debug mode
     #                     using environment variable totalview
     # 25/02/09 - Siggi  - cputime-option (-t) is allowed to be omitted for
     #                     interactive runs
     # 05/03/09 - Siggi  - adjustments for new NEC-SX9 at RIAM (necriam)
     # 16/03/09 - Siggi  - dvrp_lib, dvrp_inc replaced by dvr_lib, dvr_inc,
     #                     dvr streaming server is automatically started using
     #                     new variable dvr_server and a configuration file
     #                     .dvrserver.config,
     #                     processing of dvr output files using new script
     #                     process_dvr_output implemented, in order to make
     #                     dvr application more user friendly
     # 20/03/09 - Marcus - update of n1ge command for lctit
     # 16/04/09 - Siggi  - new option -y for precursor (uncoupled) ocean runs
     #                     to be followed by a coupled atmosphere-ocean run
     # 21/04/09 - Siggi  - adjustments for new IBM at DKRZ, which is now ibmh
     # 24/06/09 - BjornM - adjustments for coupled/precursor runs on ibmy
     # 08/07/09 - Siggi  - default value for email_notification is none,
     #                     option -e added to subjob
     # 19/08/09 - Marcus - MPI debug option
     # 21/08/09 - Marcus - totalview on hice/bice also available for mvapich2
     # 25/08/09 - BjornM - adpated for lck
     # 26/08/09 - Siggi  - additional environment variables for mpt on ice2
     # 26/08/09 - Marcus - adjustment for ice2 on lcsgib
     # 29/09/09 - Siggi  - default value for archiving is false, option "-A"
     #                     switches on archiving, archiving on SGI-ICE enabled
     # 16/10/09 - Carolin- adjustments for archiving on SGI-ICE of binary files;
     #                     adjustment for special1q
     # 18/12/09 - Carolin- modification of archiving (permq)
     # 01/02/10 - Siggi  - adapted for lcxt5m and lckyoto (Fujitsu HX600)
     # 03/02/10 - Siggi  - make options (mopts) to be set by configuration file
     #                     implemented
     # 08/02/10 - Siggi  - loading of modules now controlled via configuration
     #                     file (modules)
     # 02/03/10 - Siggi  - for each block in the configuration file, separate
     #                     utility programs are used, combine_plot_fields is
     #                     directly called and must not be given by an output
     #                     command in the configuration file any more
     # 15/06/10 - Rieke  - ssh from compute nodes to login nodes on hosts 
     #                     lcsgih/lcsgib is done using the names 
     #                     hicegate0/bicegate0 instead of the IP addresses
     # 17/08/10 - BjornM - adjustments for interactive runs on lcxt4
     # 07/09/10 - Siggi  - bugfix for wrong netcdf/3.6.3 module on lcsgi
     # 08/12/10 - Siggi  - new handling of openmp/hybrid runs, option -O
     #                     has now argument threads_per_task
     #                     adjustments for Kyushu Univ. (lcrte, ibmku)
     # 14/12/10 - Siggi  - adjustments for new Tsubame system at Tokyo
     #                     institute of technology (lctit)
     # 23/12/10 - Micha  - different number of processors in ocean and atmosphere
     #                     is now allowed 


 
    # VARIABLENVEREINBARUNGEN + DEFAULTWERTE

 set +o allexport    # SICHERHEITSHALBER UNTERBINDEN, DA SONST EVTL. STAGEOUT
                     # NICHT LAUEFT (TOO MANY ARGUMENTS - PROBLEM)
 set +o noclobber    # EXISTIERENDE DATEIEN DUERFEN UEBERSCHRIEBEN WERDEN

 AddFilenames=""
 additional_conditions=""
 add_source_path=""
 afname=""
 archive_save=true
 archive_system=none
 compiler_name=""
 cond1=""
 cond2="" 
 config_file=.mrun.config
 coupled_dist=""
 coupled_mode="mpi1"
 cpp_opts=""
 cpp_options=""
 cpumax=0
 cpurest=0
 delete_temporary_catalog=true
 do_batch=false
 do_compile=true
 do_remote=false
 do_stagein=true
 do_stageout=true
 do_trace=false
 email_notification="none"
 exclude=""
 executable=""
 execution_error=false
 fimm=false
 fname=test
 fromhost=""
 global_revision=""
 group_number=none
 host=""
 host_file=""
 hp=""
 ignore_archive_error=false
 input_list=""
 interpreted_config_file=""
 job_catalog="~/job_queue"
 job_on_file=""
 keep_data_from_previous_run=false
 link_local_input=false
 link_local_output=false
 localhost_realname=$(hostname)
 local_compile=false
 local_dvrserver_running=.FALSE.
 locat=normal
 mainprog=""
 makefile=""
 mc=$0
 while [[ $(echo $mc | grep -c "/") != 0 ]]
 do
    mc=`echo $mc | cut -f2- -d"/"`
 done
 module_calls=""
 mrun_script_name=$mc
 netcdf_inc=""
 netcdf_lib=""
 netcdf_support=false
 node_usage=default
 numprocs=""
 numprocs_atmos=0
 numprocs_ocean=0
 OOPT=""
 openmp=false
 output_list=""
 package_list=""
 punkte="..........................................................."
 queue=none
 read_from_config=""
 restart_run=false
 if [[ `hostname` = rte10 ]]
 then
   return_addres=133.5.185.60
   echo "+++ WARNING: return_addres changed to $return_addres !!!!!"
 else
    return_addres=$(nslookup `hostname` 2>&1 | grep "Address:" | tail -1 | awk '{print $2}')
 fi
 return_password=""
 return_username=$LOGNAME
 remotecall=false
 remote_username=""
 run_coupled_model=false
 run_mode=""
 scirocco=false
 store_on_archive_system=false
 striche="  ----------------------------------------------------------------------------"
 silent=false
 source_list=""
 source_path=SOURCE
 tasks_per_node=""
 threads_per_task=1
 tmpcreate=false
 tmp_data_catalog=""
 transfer_problems=false
 usern=$LOGNAME
 use_openmp=false
 working_directory=`pwd`
 TOPT=""
 XOPT=""
 zeit=$( date | cut -c 12-19 )

 typeset -i  iec=0 iic=0 iin=0 ioc=0 iout=0 memory=0 stagein_anz=0 stageout_anz=0
 typeset -i  cputime i ii iia iii iio icycle inode ival jobges jobsek maxcycle minuten nodes pes sekunden tp1

 typeset  -R30 calltime
 typeset  -L20 spalte1
 typeset  -L40 spalte2
 typeset  -L60 spalte3
 typeset  -L35 string1=`date`
 typeset  -L12 string2=$usern
 typeset  -L12 string3=$localhost_realname
 typeset  -L12 string4
 typeset  -L12 string5
 typeset  -L30 version="MRUN  2.0 Rev$Rev: 670 $"



    # EINZELNE VARIABLE FUER HAUPTPROGRAMM EXPORTIEREN
 export  cpurest fname host localhost return_addres return_username remotecall tasks_per_node

    # FOLGENDE VARIABLEN MUESSEN FUER DIE INTERPRETATION DER KONFIGURATIONSDATEI
    # EXPORTIERT WERDEN
 export  afname config_file cpp_opts cpumax do_batch do_trace fname fromhost
 export  group_number input_list memory numprocs output_list queue run_mode


 
    # FEHLERBEHANDLUNG
    # BEI EXIT:
 trap 'rm -rf  $working_directory/tmp_mrun
       if [[ $locat != localhost ]]
       then
#          if [[ ! -f ${mrun_path}/statistik/mrun_statistik ]]
#          then
#             cat  >  ${mrun_path}/statistik/mrun_statistik  <<  %STATEND%
#MRUN-calls on $localhost
#
#date and time                      user        localhost   remotehost  termination mrun-command
#--------------------------------------------------------------------------------------------------------------------
#%STATEND%
#             chmod  666  ${mrun_path}/statistik/mrun_statistik
#          fi
#
#             # EINTRAG IN DIE STATISTIK-DATEI
#          string4=$host
#          string5=$locat
#          if [[ "$job_on_file" = ""  &&  $locat != control_c  &&  $locat != user_abort ]]
#          then
#             if [[ $do_batch = true ]]
#             then
#                printf "$string1$string2$string3$string4$string5$mrun_com \n"  >>  ${mrun_path}/statistik/mrun_statistik
#             else
#                printf "$string1$string2$string3$string4$string5$mc \n"  >>  ${mrun_path}/statistik/mrun_statistik
#             fi
#          fi
          echo " " > /dev/null
       fi

       if [[ $locat != normal  &&  $locat != control_c  &&  $locat != local_compile ]]
       then

              # EVENTUELLE ERROR-KOMMANDOS ABARBEITEN
          (( i = 0 ))
          while (( i < iec ))
          do
             (( i = i + 1 ))
             printf "\n  *** Execution of ERROR-command:\n"
             printf "  >>> ${err_command[$i]}\n"
             eval  ${err_command[$i]}
          done
          if [[ -n $interpreted_config_file ]]  then
             rm -rf  $interpreted_config_file
          fi
          if [[ -n .mrun_environment ]]  then
             rm -rf  .mrun_environment
          fi
          if [[ $tmpcreate = true ]]
          then
             printf "\n  *** Contents of \"$TEMPDIR\":\n"
             ls -al; cd
             [[ $delete_temporary_catalog = true ]]  &&  rm -rf $TEMPDIR
          fi
          if [[ "$dvrserver_id" != "" ]]
          then
             echo "+++ killing dvrserver_id=$dvrserver_id"
             kill $dvrserver_id
          fi
          if [[ -f ~/job_queue/JOBINFO.$QSUB_REQID ]]
          then
             rm -rf  ~/job_queue/JOBINFO.$QSUB_REQID
          fi
          printf "\n\n+++ MRUN killed \n\n"
       elif [[ $locat != control_c ]]
       then
          printf "\n\n --> all actions finished\n\n"
          printf "     Bye, bye $usern !!\n\n"
       fi' exit


    # BEI TERMINAL-BREAK:
 trap 'rm -rf  $working_directory/tmp_mrun
       [[ $tmpcreate = true ]]  &&  (cd; rm -rf $TEMPDIR)
       if [[ -f ~/job_queue/JOBINFO.$QSUB_REQID ]]
       then
          rm -rf  ~/job_queue/JOBINFO.$QSUB_REQID
       fi
       if [[ "$dvrserver_id" != "" ]]
       then
          echo "+++ killing dvrserver_id=$dvrserver_id"
          kill $dvrserver_id
       fi
       printf "\n+++ MRUN killed by \"^C\" \n\n"
       locat=control_c
       exit
      ' 2


    # CHECK IF THE PATH FOR THE PALM BINARIES (SCRIPTS+UTILITY-PROGRAMS) HAS
    # BEEN SET
 if [[ "$PALM_BIN" = "" ]]
 then
    printf "\n  +++ environment variable PALM_BIN has not been set"
    printf "\n      please set it to the directory where the PALM scripts are located"
    locat=palm_bin; exit
 fi
 export PATH=$PALM_BIN:$PATH



    # SHELLSCRIPT-OPTIONEN EINLESEN UND KOMMANDO NEU ZUSAMMENSETZEN, FALLS ES
    # FUER FOLGEJOBS BENOETIGT WIRD
 while  getopts  :a:AbBc:Cd:D:Fg:G:h:H:i:IkK:m:M:n:o:O:p:P:q:r:R:s:St:T:u:U:vxX:yY: option
 do
   case  $option  in
       (a)   afname=$OPTARG;;
       (A)   store_on_archive_system=true; mc="$mc -A";;
       (b)   do_batch=true; mc="$mc -b";;
       (B)   delete_temporary_catalog=false; mc="$mc -B";;
       (c)   config_file=$OPTARG; mc="$mc -c$OPTARG";;
       (C)   restart_run=true; mc="$mc -C";;
       (d)   fname=$OPTARG; mc="$mc -d$OPTARG";;
       (D)   cpp_opts="$cpp_opts $OPTARG"; mc="$mc -D'$OPTARG'";;
       (F)   job_on_file="-D"; mc="$mc -F";;
       (g)   group_number=$OPTARG; mc="$mc -g$OPTARG";;
       (G)   global_revision=$OPTARG; mc="$mc -G'$OPTARG'";;
       (h)   host=$OPTARG; mc="$mc -h$OPTARG";;
       (H)   fromhost=$OPTARG; mc="$mc -H$OPTARG";;
       (i)   input_list=$OPTARG; mc="$mc -i'$OPTARG'";;
       (I)   ignore_archive_error=true; mc="$mc -I";;
       (k)   keep_data_from_previous_run=true; mc="$mc -k";;
       (K)   additional_conditions="$OPTARG"; mc="$mc -K'$OPTARG'";;
       (m)   memory=$OPTARG; mc="$mc -m$OPTARG";;
       (M)   makefile=$OPTARG; mc="$mc -M$OPTARG";;
       (n)   node_usage=$OPTARG; mc="$mc -n$OPTARG";; 
       (o)   output_list=$OPTARG; mc="$mc -o'$OPTARG'";;
       (O)   use_openmp=true; threads_per_task=$OPTARG; mc="$mc -O$OPTARG";;
       (p)   package_list=$OPTARG; mc="$mc -p'$OPTARG'";;
       (P)   return_password=$OPTARG; mc="$mc -P$OPTARG";;
       (q)   queue=$OPTARG; mc="$mc -q$OPTARG";;
       (r)   run_mode=$OPTARG; mc="$mc -r'$OPTARG'";;
       (R)   remotecall=true;return_addres=$OPTARG; mc="$mc -R$OPTARG";;
       (s)   source_list=$OPTARG; mc="$mc -s'$OPTARG'";;
       (S)   read_from_config=false; mc="$mc -S";;
       (t)   cpumax=$OPTARG; mc="$mc -t$OPTARG";;
       (T)   tasks_per_node=$OPTARG; mc="$mc -T$OPTARG";;
       (u)   remote_username=$OPTARG; mc="$mc -u$OPTARG";;
       (U)   return_username=$OPTARG; mc="$mc -U$OPTARG";;
       (v)   silent=true; mc="$mc -v";;
       (x)   do_trace=true;set -x; mc="$mc -x";;
       (X)   numprocs=$OPTARG; mc="$mc -X$OPTARG";;
       (y)   ocean_file_appendix=true; mc="$mc -y";;
       (Y)   run_coupled_model=true; coupled_dist=$OPTARG; mc="$mc -Y'$OPTARG'";;
       (\?)  printf "\n  +++ unknown option $OPTARG \n"
             printf "\n  --> type \"$0 ?\" for available options \n"
             locat=parameter;exit;;
   esac
 done


    # EVTL. POSITIONSPARAMETER EINLESEN
    # ZUR ZEIT GIBT ES NUR DEN PARAMETER ? (=KURZINFO)
 shift OPTIND-1


    # KURZE AUFRUFBESCHREIBUNG WIRD HIER AUSGEGEBEN
 if [[ "$1" = "?" ]]
 then
   (printf "\n  *** mrun can be called as follows:\n"
    printf "\n      $mrun_script_name  -b -c.. -d.. -D.. -f.. -F -h.. -i.. -I -K.. -m.. -o.. -p.. -r.. -R -s.. -t.. -T.. -v -x -X.. -y -Y.. <modus>\n"
    printf "\n      Description of available options:\n"
    printf "\n      Option  Description                              Default-Value"
    printf "\n        -a    base name of input files                 equiv. -d"
    printf "\n        -A    archiving when using file-attribute fl"
    printf "\n        -b    batch-job on local machine               ---"
    printf "\n        -B    do not delete temporary directory at end ---"
    printf "\n        -c    configuration file                       .mrun.config"
    printf "\n        -d    base name of files attached to program   test"
    printf "\n        -D    preprocessor(cpp)-directives             \"\" "
    printf "\n        -F    create remote job file only              ---"
    printf "\n        -h    execution host                           $localhost_realname"
    printf "\n        -i    INPUT control list                       \"\" "
    printf "\n        -I    archiving errors of previous batch-jobs"
    printf "\n              will be ignored"
    printf "\n        -k    keep data from previous run"
    printf "\n        -K    additional conditions for controling"
    printf "\n              usage of conditional code and"
    printf "\n              env-variables in configuration file      \"\" "
    printf "\n        -m    memory demand in MB (batch-jobs)         0 MB"
    printf "\n        -M    Makefile name                            Makefile"
    printf "\n        -n    node usage (shared/not_shared)           depending on -h"
    printf "\n        -o    OUTPUT control list                      \"\" "
    printf "\n        -O    use OpenMP                               ---"
    printf "\n        -p    software package list                    \"\" "
    printf "\n        -q    queue                                    \"$queue\" "
    printf "\n        -r    run control list (combines -i -o)        \"\" "
    printf "\n        -s    filenames of routines to be compiled     \"\" "
    printf "\n              must end with .f, .f90, .F, or .c !"
    printf "\n              use \"..\" for more than one file and wildcards"
    printf "\n              -s TEST compiles all files with w-permit"
    printf "\n        -S    config file interpreted by shellscript   ---"
    printf "\n        -t    allowed cpu-time in seconds (batch)      0"
    printf "\n        -T    tasks per node                           depending on -h"
    printf "\n        -u    username on remote machine               \"\" "
    printf "\n        -v    no prompt for confirmation               ---"
    printf "\n        -x    tracing of mrun for debug purposes       ---"
    printf "\n        -X    # of processors (on parallel machines)   1"
    printf "\n        -y    add appendix \"_O\" to all local output"
    printf "\n              files (ocean precursor runs followed by"
    printf "\n              coupled atmosphere-ocean runs)           ---"
    printf "\n        -Y    run coupled model, \"#1 #2\" with" 
    printf "\n              #1 atmosphere and #2 ocean processors    \"#/2 #/2\" depending on -X"
    printf "\n "
    printf "\n      Possible values of positional parameter <modus>:"
    printf "\n        \"?\"       -  this outline \n\n") | more
    exit
 elif [[ "$1" != "" ]]
 then
    printf "\n  +++ positional parameter $1 unknown \n"
    locat=parameter; exit
 fi



    # KURZE STARTMELDUNG
 printf "\n*** $version "
 printf "\n    will be executed.     Please wait ..."



    # PRUEFEN, OB KONFIGURATIONS-DATEI VORHANDEN
 if [[ ! -f $config_file ]]
 then
    printf "\n\n  +++ configuration file: "
    printf "\n           $config_file"
    printf "\n      does not exist"
    locat=connect; exit  
 fi


    # HOST-IDENTIFIER (local_host) AUS KONFIGURATIONSDATEI BESTIMMEN
 line=""
 grep  "%host_identifier"  $config_file  >  tmp_mrun
 while read line
 do
    if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
    then
       HOSTNAME=`echo $line | cut -d" " -s -f2`
       host_identifier=`echo $line | cut -d" " -s -f3`
       if [[ $localhost_realname = $HOSTNAME ]]
       then
          localhost=$host_identifier
          break
       fi
    fi
 done < tmp_mrun

 if [[ "$localhost" = "" ]]
 then
    printf "\n\n  +++ no host identifier found in configuration file \"$config_file\""
    printf "\n      for local host \"$localhost_realname\"."
    printf "\n      Please add line"
    printf "\n      \"\%host_identifier $localhost_realname <identifier>\""
    printf "\n      to the configuration file."
    locat=localhost; exit
 fi


    # HOSTSPEZIFISCHE VARIABLEN SETZEN
 case  $localhost_realname  in
     (r1*|r2*|h01*|b01*)     archive_system=tivoli;;
     (cs*)                   archive_system=ut;;
     (fimm.bccs.uib.no)      fimm=true;;
     (gate|n-sx)             PATH=$PALM_BIN:$PATH:/usr/bin/nqsII;;
     (scirocco)              scirocco=true;;
 esac


 
    # BASISNAME DER INPUT-DATEIEN GLEICH ALLGEMEINEM BASISNAMEN SETZEN,
    # WENN NICHT VOM BENUTZER ANDERS BESTIMMT
 [[ "$afname" = "" ]]  &&  afname=$fname


    # EVTL. RUN-MODUS DEN I/O-LISTEN HINZUFUEGEN
 if [[ "$run_mode" != "" ]]
 then
    input_list="$input_list $run_mode"
    output_list="$output_list $run_mode"
 fi


    # RECHNERNAMEN ABSPEICHERN, VON DEM AUS JOB GESTARTET WIRD,
    # ALLERDINGS NUR DANN, WENN NICHT PER OPTION -H BEREITS EIN WERT
    # ZUGEWIESEN WURDE (MRUN MACHT DIES IMMER, WENN ES SELBST BATCH-JOBS
    # STARTET)
 if [[ "$fromhost" = "" ]]
 then
    fromhost=$localhost
 fi


     # PRUEFEN, OB MRUN NUR TESTWEISE AUF DER LOKALEN MASCHINE KOMPILIEREN SOLL
 if [[ "$source_list" = LOCAL_COMPILE_TEST ]]
 then
    source_list=TEST
    local_compile=true
    host=$localhost
 fi
    

    # PRUEFEN, OB AUF REMOTE-MASCHINE GERECHNET WERDEN SOLL
    # WERT VON do_remote WIRD FUER DATEIVERBINDUNGEN BENOETIGT.
    # WENN AUF REMOTE-MASCHINE GERECHNET WIRD, IST GLEICHZEITIG KLAR,
    # DASS EIN BATCH-JOB GESTARTET WERDEN MUSS
 if [[ -n $host  &&  "$host" != $localhost ]]
 then
    do_batch=true
    do_remote=true
    case  $host  in
        (ibm|ibmh|ibmku|ibms|ibmy|nech|necriam|lckyoto|lcsgib|lcsgih|unics|lcxt4|lcxt5m|lck)  true;;
        (*)  printf "\n"
             printf "\n  +++ sorry: execution of batch jobs on remote host \"$host\""
             printf "\n      is not available"
             locat=nqs; (( iec = 0 )); exit;;
    esac
 else
    host=$localhost
 fi


     # ZUSATZBEDINGUNGEN (OPTION -K) AUSWERTEN
 if [[ -n $additional_conditions ]]
 then
#    echo $additional_conditions | cut -d" " -f1-3 | read  cond1  cond2  dummy
    cond1=`echo $additional_conditions | cut -d" " -f1`
    cond2=`echo $additional_conditions | cut -d" " -s -f2`
    dummy=`echo $additional_conditions | cut -d" " -s -f3`
    if [[ -n $dummy ]]
    then
       printf "\n  +++ more than 2 additional conditions given for Option \"-K\""
       locat=options; exit
    fi
    block=_$cond1
    [[ -n $cond2 ]]  &&  block=${block}_$cond2
 fi


      # KOPPLUNGSEIGENSCHAFTEN (-Y) AUSWERTEN UND coupled_mode BESTIMMEN
 if [[ $run_coupled_model = true ]] 
 then

    if  [[ -n $coupled_dist ]]
    then

       numprocs_atmos=`echo $coupled_dist | cut -d" " -s -f1`
       numprocs_ocean=`echo $coupled_dist | cut -d" " -s -f2`

       if (( $numprocs_ocean + $numprocs_atmos != $numprocs ))
       then

          printf "\n  +++ number of processors does not fit to specification by \"-Y\"."
          printf "\n      PEs (total)     : $numprocs"
          printf "\n      PEs (atmosphere): $numprocs_atmos"
          printf "\n      PEs (ocean)     : $numprocs_ocean"
          locat=coupling; exit

       fi

    else

       (( numprocs_ocean = $numprocs / 2 ))
       (( numprocs_atmos = $numprocs / 2 ))

    fi
    coupled_dist=`echo "$numprocs_atmos $numprocs_ocean"`

       # GET coupled_mode FROM THE CONFIG FILE
    line=""
    grep  "%cpp_options.*-D__mpi2.*$host" $config_file  >  tmp_mrun
    while read line
    do
       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" &&  ( $(echo $line | cut -d" " -s -f4) = $cond1 || $(echo $line | cut -d" " -s -f4)  = $cond2 ) ]]
       then
          coupled_mode="mpi2"
       fi
    done < tmp_mrun

 fi


    # PRUEFEN, OB EVTL. BEI VORHERGEHENDEM LAUF (KETTENJOB) EINE
    # ARCHIVIERUNG FEHLGESCHLAGEN IST
 if [[ -f ~/job_queue/ARCHIVE_ERROR_$fname ]]
 then
    if [[ $ignore_archive_error = false ]]
    then
       printf "\n  +++ data archiving of previous run failed"
       printf "\n      see directory \~/job_queue on remote machine"
       locat=archive; exit
    else
       printf "\n  +++ warning: data archiving in a previous run failed"
       printf "\n      MRUN continues, trying to get backup copy"
    fi
 fi



    # LESEN UND INTERPRETIEREN DER KONFIGURATIONS-DATEI VOM SHELLSCRIPT AUS
    # VORUEBERGEHEND ZWINGEND AUF LINUX-RECHNERN
 if [[ "$read_from_config" = false ]]
 then

    [[ $silent = false ]]  &&  printf "\n    Reading the configuration file... "
    while  read zeile
    do
        [[ $silent = false ]]  &&  printf "."


          # ZUERST EVENTUELL VORKOMMENDE ENVIRONMENT-VARIABLEN DURCH IHRE WERTE
          # ERSETZEN
       eval  zeile=\"$zeile\"


          # INTERPRETATION DER ZEILE
       if [[ "$(echo $zeile)" = "" ]]
       then
             # LEERZEILE, KEINE AKTION
          continue

       elif [[ "$(echo $zeile | cut -c1)"  =  "#" ]]
       then

             # ZEILE IST KOMMENTARZEILE
          true

       elif [[ "$(echo $zeile | cut -c1)"  =  "%" ]]
       then

             # ZEILE DEFINIERT ENVIRONMENT-VARIABLE
          zeile=$(echo $zeile | cut -c2-)
#          echo $zeile | cut -d" " -f1-5 | read  var  value  for_host  for_cond1  for_cond2
          var=`echo $zeile | cut -d" " -f1`
          value=`echo $zeile | cut -d" " -s -f2`
          for_host=`echo $zeile | cut -d" " -s -f3`
          for_cond1=`echo $zeile | cut -d" " -s -f4`
          for_cond2=`echo $zeile | cut -d" " -s -f5`

          if [[ "$for_host" = ""  ||  ( "$for_host" = $host  &&  "$for_cond1" = "$cond1"  &&  "$for_cond2" = "$cond2" )  ||  $(echo "$input_list$output_list"|grep -c "$for_host") != 0 ]]
          then

                # BEI COMPILER- CPP- ODER LINKEROPTIONEN EVTL ":" DURCH " "
                # ERSETZEN. "::" WIRD DURCH ":" ERSETZT.
             value=`echo $value | sed 's/::/%DUM%/g' | sed 's/:/ /g' | sed 's/%DUM%/:/g'`


                # ENVIRONMENT-VARIABLE WIRD WERT AUS KONFIGURATIONSDATEI
                # ZUGEWIESEN, WENN SIE SELBST NOCH KEINEN WERT UEBER DIE
                # ENTSPRECHENDE SCRIPT-OPTION ERHALTEN HAT. SOLCHE
                # VARIABLEN HAETTEN DANN DEN WERT "" ODER IM INTEGER-FALL DEN
                # WERT 0.  ALLGEMEINE REGEL ALSO: SCRIPT-OPTION GEHT UEBER
                # KONFIGURATIONSDATEI
             if [[ "$(eval echo \$$var)" = ""  ||  "$(eval echo \$$var)" = "0" ]]
             then
                eval  $var=\$value

                   # EVTL. BILDSCHIRMAUSGABEN DER ENVIRONMENT-VARIABLEN
                if [[ $do_trace = true ]]
                then
                   printf "\n*** ENVIRONMENT-VARIABLE $var = $value"
                fi
             fi

                # WENN ENVIRONMENT-VARIABLE HOST VEREINBART, DANN SOFORT AUSWERTEN
                # WERT VON do-remote WIRD BEI DATEIVERBINDUNGEN BENOETIGT
                # WENN AUF REMOTE-MASCHINE GERECHNET WIRD, IST GLEICHZEITIG KLAR,
                # DASS EIN BATCH-JOB GESTARTET WERDEN MUSS
             if [[ $var = host ]]
             then
                if [[ -n $host  &&  "$host" != $localhost ]]
                then
                   do_batch=true
                   do_remote=true
                   case  $host  in
                       (ibm|ibmh|ibmku|ibms|ibmy|lckyoto|lcsgib|lcsgih|nech|necriam|unics|lcxt4|lcxt5m|lck)  true;;
                       (*)  printf "\n  +++ sorry: execution of batch jobs on remote host \"$host\""
                            printf "\n      is not available"
                            locat=nqs; exit;;
                   esac
                else
                   host=$localhost
                fi
             fi

                # VOM BENUTZER DEFINIERTE ENVIRONMENT VARIABLEN MUESSEN PRINZIPIELL
                # EXPORTIERT WERDEN, DA SIE VIELLEICHT IN WEITER UNTEN AUFZURUFEN-
                # DEN PROGRAMMEN BENOETIGT WERDEN
             export  $var
          fi




       elif [[ "$(echo $zeile | cut -c1-3)" = "EC:" ]]
       then

             # ZEILE DEFINIERT ERROR-KOMMANDO
          (( iec = iec + 1 ))
          zeile=$(echo $zeile | cut -c4-)
          err_command[$iec]="$zeile"

       elif [[ "$(echo $zeile | cut -c1-3)" = "IC:" ]]
       then

             # ZEILE DEFINIERT INPUT-KOMMANDO
          (( iic = iic + 1 ))
          zeile=$(echo $zeile | cut -c4-)
          in_command[$iic]="$zeile"

       elif [[ "$(echo $zeile | cut -c1-3)" = "OC:" ]]
       then

             # ZEILE DEFINIERT OUTPUT-KOMMANDO
          (( ioc = ioc + 1 ))
          zeile=$(echo $zeile | cut -c4-)
          out_command[$ioc]="$zeile"

       else

             # ZEILE DEFINIERT DATEIVERBINDUNG. EINLESEN DER DATEIEIGENSCHAFTEN
             # s2a: in/out - Feld
             # s2b: loc    - Feld (optional)
             # s2c: tr/ar  - Feld (optional)
#          echo $zeile | cut -d" " -f1-2 | read  s1  s2
          s1=`echo $zeile | cut -d" " -f1`
          s2=`echo $zeile | cut -d" " -s -f2`
          s2a=$(echo $s2 | cut -d":" -f1)
          if [[ $(echo $s2 | grep -c ":") = 0 ]]
          then
             s2b=""
             s2c=""
          else
#             echo $s2 | cut -d":" -f2-3 | sed 's/:/ /g' | read  s2b  s2c
             s2b=`echo $s2 | cut -d":" -f2 | sed 's/:/ /g'`
             s2c=`echo $s2 | cut -d":" -s -f3 | sed 's/:/ /g'`
          fi
#          echo $zeile | cut -d" " -f3-6 | read  s3  s4  s5  s6
          s3=`echo $zeile | cut -d" " -f3`
          s4=`echo $zeile | cut -d" " -s -f4`
          s5=`echo $zeile | cut -d" " -s -f5`
          s6=`echo $zeile | cut -d" " -s -f6`

       
             # ABSPEICHERN DER DATEIVERBINDUNG, FALLS IN INPUT- ODER OUTPUT-LIST
             # VERMERKT. VARIABLE S3 KANN AUCH LISTE ENTHALTEN (FELDTRENNER ":")
             # DATEIVERBINDUNG WIRD DANN NICHT ABGESPEICHERT UND GEPRUEFT, WENN
             # PROGRAMMLAUF AUF REMOTE-MASCHINE ERFOLGT UND DATEI NUR LOKAL VOR-
             # HANDEN SEIN MUSS (D.H. s2b = loc)
          IFSALT="$IFS"; IFS="$IFS:"
          if [[ "$s2a" = in  &&  ! ( $do_remote = true  &&  ( "$s2b" = loc  ||  "$s2b" = locopt ) ) ]]
          then
             found=false
             for  actual  in  $input_list
             do
                for  formal  in  $s3
                do
                   [[ $actual = $formal  ||  "$formal" = "-" ]]  &&  found=true
                done
             done
             if [[ $found = true ]]
             then
                (( iin = iin + 1 ))
                localin[$iin]=$s1; transin[$iin]=$s2b; actionin[$iin]=$s2c;
                typein[$iin]=$s3; pathin[$iin]=$s4; endin[$iin]=$s5;
                extin[$iin]=$s6
             fi
          elif [[ "$s2a" = out  &&  ! ( $do_remote = true  &&  "$s2b" = loc ) ]]
          then
             found=false
             for  actual  in  $output_list
             do
                for  formal  in  $s3  
                do
                   [[ $actual = $formal  ||  "$formal" = "-"  ]]  &&  found=true
                done
             done
             if [[ $found = true ]]
             then
                (( iout = iout + 1 ))
                localout[$iout]=$s1; actionout[$iout]=$s2c; typeout[$iout]=$s3;
                pathout[$iout]=$s4; endout[$iout]=$s5; extout[$iout]=$s6
             fi
          elif [[ "$s2a" != in  &&  "$s2a" != out ]]
          then
             printf "\n  +++ I/O-attribute in configuration file $config_file has the invalid"
             printf "\n      value \"$s2\". Only \"in\" and \"out\" are allowed!"
             locat=connect; exit
          fi
          IFS="$IFSALT"
       fi
    done < $config_file

 else


       # INTERPRETATION DER KONFIGURATIONSDATEI MITTELS FORTRAN 90 - PROGRAMM
    [[ $silent = false ]]  &&  printf "..."
    export  cond1 cond2 config_file do_remote do_trace input_list localhost output_list
    export  interpreted_config_file=.icf.$RANDOM



       # ENVIRONMENT-VARIABLEN FUER INTERPRET_CONFIG UEBER NAMELIST_DATEI ZUR
       # VERFUEGUNG STELLEN
    cat  >  .mrun_environment  <<  %%END%%
 &mrun_environment  cond1 = '$cond1', cond2 = '$cond2', 
                    config_file = '$config_file', do_remote = '$do_remote',
                    do_trace = '$do_trace', host = '$host',
                    input_list = '$input_list', icf = '$interpreted_config_file',
                    localhost = '$localhost', output_list = '$output_list' /

%%END%%

       # WERTE VON MRUN-OPTIONEN SICHERN UND DAMIT GEGEBENENFALLS SPAETER DIE
       # IN DER KONFIGURAIONSDATEI ANGEGEBENEN WERTE UEBERSTEUERN
    mrun_memory=$memory
    mrun_group_number=$group_number
    mrun_cpumax=$cpumax
    mrun_numprocs=$numprocs

    if [[ $localhost_realname = "sx-fep" ]]
    then
       /home/COAR/NC/raasch/pub/interpret_config_necriam.x
    else

       if [[ "$host" != $localhost ]]
       then

             # REMOTE JOB FROM LOCAL HOST: JUST TAKE THE FIRST EXECUTABLE FOUND
          interpret_config_executable=`ls -1 ${PALM_BIN}/interpret_config*.x 2>/dev/null`
          if [[ $? != 0 ]]
          then
             printf "\n\n  +++ no interpret_config found"
             printf "\n      run \"mbuild -u -h ...\" to generate utilities for this host"
             locat=interpret_config; exit
          fi
          interpret_config_executable=`echo $interpret_config_executable | cut -d" " -f1`
          $interpret_config_executable

       else

             # CHECK, IF THERE IS AN EXECUTABLE FOR THE BLOCK
          if [[ ! -f ${PALM_BIN}/interpret_config${block}.x ]]
          then
             printf "\n\n  +++ no interpret_config found for given block \"$cond1 $cond2\""
             printf "\n      run \"mbuild -u -h ...\" to generate utilities for this block"
             locat=interpret_config; exit
          else
             interpret_config${block}.x
          fi

       fi
    fi
    rm .mrun_environment


       # AUSFUEHRUNG DER GENERIERTEN SHELL-KOMMANDOS IN DIESER SHELL
    chmod  u+x  $interpreted_config_file
    export PATH=$PATH:.
    . $interpreted_config_file
    rm  $interpreted_config_file


       # OPTIONSWERTE UEBERSTEUERN KONFIGURATIONSDATEI
    [[ $mrun_memory     != 0  ]]  &&  memory=$mrun_memory
    [[ "$mrun_group_number" != "none" ]]  &&  group_number=$mrun_group_number
    [[ $mrun_cpumax     != 0  ]]  &&  cpumax=$mrun_cpumax
    [[ "$mrun_numprocs" != "" ]]  &&  numprocs=$mrun_numprocs

 fi


    # QUELLTEXTVERZEICHNIS AUF LOKALER MASCHINE AUS KONFIGURATIONSDATEI
    # BESTIMMEN (WUERDE SONST EVTL. DAS VERZEICHNIS DES JEWEILS UNTER -h
    # ANGEGEBENEN REMOTE-RECHNERS SEIN)
    # BEI BATCH-JOBS SIND DIE ZU UEBERSETZENDEN PROGRAMMTEILE SCHON KOMPLETT
 if [[ "$SOURCES_COMPLETE" = "" ]]
 then

       # ZUERST PRUEFEN, OB EIN GLOBALER QUELLTEXTPFAD FUER ALLE RECHNER
       # VEREINBART WURDE
    source_path=""
    line=""
    grep "%source_path" $config_file  >  tmp_mrun
    while read line
    do
       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
       then
          if [[ "$(echo $line | cut -d" " -f3)" = "" ]]
          then
             global_source_path=`echo $line | cut -d" " -f2`
          fi
       fi
    done  <  tmp_mrun

    line=""
    found=false
    grep  " $localhost" $config_file | grep "%source_path"  >  tmp_mrun
    while read line
    do
       if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
       then
          if [[ $found = true ]]
          then
             printf "\n\n  +++ more than one source path found in configuration file"
             printf "\n      for local host \"$localhost\" "
             locat=source_path; exit
          fi
          source_path=`echo $line | cut -d" " -f2`
          found=true
       fi
    done  <  tmp_mrun
    rm  tmp_mrun

    if [[ "$source_path" = "" ]]
    then
       if [[ "$global_source_path" != "" ]]
       then
          source_path=$global_source_path
       else
          printf "\n\n  +++ no source path found in configuration file"
          printf "\n      for local host \"$localhost\" "
          locat=source_path; exit
       fi
    fi
    eval source_path=$source_path

    if [[ ! -d $source_path ]]
    then
       printf "\n\n  +++ source path \"$source_path\" on local host"
       printf "\n      \"$localhost\" does not exist"
       locat=source_path; exit
    fi

 fi


    # GLOBALE REVISIONSNUMMER ERMITTELN (FORTSETZUNGSLAEUFEN WIRD DIESE
    # DURCH OPTION -G MITGETEILT)
 if [[ "$global_revision" = "" ]]
 then
    global_revision=`svnversion $source_path  2>/dev/null`
    global_revision="Rev: $global_revision"
 fi


    # NOCHMAL PRUEFEN, OB AUF REMOTE-MASCHINE GERECHNET WERDEN SOLL
    # (HOST KANN IN KONFIGURATIONSDATEI ANDERS FESTGELEGT WORDEN SEIN)
    # WERT VON do_remote WIRD FUER DATEIVERBINDUNGEN BENOETIGT.
    # WENN AUF REMOTE-MASCHINE GERECHNET WIRD, IST GLEICHZEITIG KLAR,
    # DASS EIN BATCH-JOB GESTARTET WERDEN MUSS
 if [[ -n $host  &&  "$host" != $localhost ]]
 then
    do_batch=true
    do_remote=true
    case  $host  in
        (ibm|ibmh|ibmku|ibms|ibmy|lckyoto|lcsgib|lcsgih|nech|necriam|unics|lcxt4|lcxt5m|lck)  true;;
        (*)  printf "\n"
             printf "\n  +++ sorry: execution of batch jobs on remote host \"$host\""
             printf "\n      is not available"
             locat=nqs; (( iec = 0 )); exit;;
    esac
 else
    host=$localhost
 fi


    # PRUEFUNG EINIGER PROZESSORZAHLANGABEN BEI RECHNUNGEN AUF PARALLELRECHNERN
 if [[ "$cond1" = parallel  ||  "$cond2" = parallel ]]
 then

       # PRUEFEN, OB DIE ANZAHL DER ZU VERWENDENDEN PES ANGEGEBEN WURDE
    if [[ ! -n $numprocs ]]
    then
       printf "\n"
       printf "\n  +++ option \"-K parallel\" requires additional specification"
       printf "\n      of the number of processors to be used by"
       printf "\n      mrun-option \"-X\" or by environment-variable"
       printf "\n      \"numprocs\" in the configuration file"
       locat=numprocs; (( iec = 0 )); exit 
    fi

       # PRUEFEN, OB DIE PROZESSORANZAHL PRO KNOTEN ANGEGEBEN WURDE (GGF.
       # DEFAULT-WERT SETZEN) UND OB SIE EIN GANZZAHLIGER TEILER DER
       # GESAMTPROZESSORANZAHL IST
    if [[ $host = nech  ||  $host = necriam  ||  $host = ibmh  ||  $host = ibms ]]
    then
       [[ "$tasks_per_node" = "" ]]  &&  tasks_per_node=6
       (( ival = $tasks_per_node ))
       (( pes = numprocs ))
#       if [[ $(echo $package_list | grep -c dvrp_graphics+1PE) = 1 ]]
#       then
#          (( pes = pes - 1 ))
#       fi
       (( ii = pes / ival ))
       if (( pes - ii * ival > 0 ))
       then
          printf "\n"
          printf "\n  +++ tasks per node (option \"-T\") must be an integral"
          printf "\n      divisor of the total number of processors (option \"-X\")"
          printf "\n      values of this mrun-call: \"-T $tasks_per_node\" \"-X $numprocs\""
          locat=tasks_per_node; (( iec = 0 )); exit 
       fi
    fi

       # IBMY HAT NUR EINEN KNOTEN
    if [[ $host = ibmy ]]
    then
       if [[ "$tasks_per_node" != ""  &&  "$tasks_per_node" != "$numprocs" ]]
       then
          printf "\n"
          printf "\n  +++ on ibmy, tasks per node (option \"-T\") must be equal to the"
          printf "\n      total number of processors (option \"-X\")"
          printf "\n      values of this mrun-call: \"-T $tasks_per_node\" \"-X $numprocs\""
          locat=tasks_per_node; (( iec = 0 )); exit 
       fi
    fi

       # FALLS OPENMP PARALLELISIERUNG VERWENDET WERDEN SOLL, ANZAHL VON THREADS
       # SETZEN UND ZAHL DER TASKS PRO KNOTEN AUF 1 SETZEN
#    if [[ $use_openmp = true ]]
#    then
#       threads_per_task=$tasks_per_node
#       tasks_per_node=1
#    fi

       # SETTINGS FOR SUBJOB-COMMAND
    TOPT="-T $tasks_per_node"
    OOPT="-O $threads_per_task"

       # GESAMTZAHL DER KNOTEN BESTIMMEN
    if [[ "$tasks_per_node" != "" ]]
    then
       (( nodes = numprocs / ( tasks_per_node * threads_per_task ) ))
    fi

       # PRUEFEN, OB NODE USAGE EINEN ERLAUBTEN WERT HAT BZW. DEN DEFAULT
       # SETZEN
    if [[ $node_usage = default ]]
    then
       if [[ $host = ibms ]]
       then
          node_usage=shared
       elif [[ $(echo $host | cut -c1-5) = lcsgi ]]
       then
          node_usage=singlejob
       else
          node_usage=not_shared
       fi
    fi

    if [[ $node_usage != shared  &&  $node_usage != not_shared  &&  $node_usage != singlejob  &&  "$(echo $node_usage | cut -c1-3)" != "sla" ]]
    then
       printf "\n"
       printf "\n  +++ node usage (option \"-n\") is only allowed to be set"
       printf "\n      \"shared\" or \"not_shared\""
       locat=tasks_per_node; (( iec = 0 )); exit 
    fi

 fi

    # PRUEFEN, OB HOSTFILE EXISTIERT
 if [[ -n $hostfile ]]
 then
    if [[ ! -f $hostfile ]]
    then
       printf "\n"
       printf "\n  +++ hostfile \"$hostfile\" does not exist"
       locat=hostfile; exit
    fi
 fi

    # PRUEFEN, OB RHOSTS DATEI EXISTIERT. GEGEBENENFALLS ANLEGEN BZW. ERWEITERN
 if [[ $host = ibmy  &&  $do_remote = false ]]
 then
    if [[ ! -f $HOME/.rhosts ]]
    then
       echo  "gfdl5.yonsei.ac.kr"  >  $HOME/.rhosts
       printf "\n\n  *** file:"
       printf "\n           $HOME/.rhosts"
       printf "\n      was created\n"
    fi
    if [[ $(grep -c gfdl5.yonsei.ac.kr $HOME/.rhosts) = 0 ]]
    then
       echo  "gfdl5.yonsei.ac.kr"  >>  $HOME/.rhosts
       printf "\n\n  *** file:"
       printf "\n           $HOME/.rhosts"
       printf "\n      was extended by the name of the current host\n"
    fi
 fi



    # FALLS NICHT VORGEGEBEN, DEFAULT-QUEUE AUF DER ZIELMASCHINE FESTLEGEN
 if [[ $queue = none ]]
 then
    case  $host  in
        (ibmh)       queue=no_class;;
        (ibmy)       queue=parallel;;
        (lckyoto)    queue=ph;;
        (lcsgib)     queue=bigq;;
        (lcsgih)     queue=bigq;;
        (lctit)      queue=S;;
        (nech)       queue=none;;
        (necriam)    queue=SP;;
        (unics)      queue=unics;;
    esac
 fi


    # VOLLSTAENDIGE DATEINAMEN DER INPUT-FILES BILDEN,
    # INPUT-DATEIEN AUF VORHANDENSEIN PRUEFEN UND EVTL. HOECHSTE ZYKLUSNUMMER
    # ERMITTELN
 (( i = 0 ))
 while (( i < iin ))
 do
    (( i = i + 1 ))
    (( maxcycle = 0 ))

       # NAMENSBILDUNG (EVTL. IST FESTER DATEINAME VORGEGEBEN)
    if [[ "${actionin[$i]}" = di ]]
    then
       remotepathin[$i]=${pathin[$i]}/${endin[$i]}  # REMOTE-PFAD ERST AUF
                                                    # REM-MASCHINE AUSWERTEN
       eval filename=${pathin[$i]}/${endin[$i]}
    else
       remotepathin[$i]=${pathin[$i]}/${afname}${endin[$i]}  # REMOTE-PFAD ERST AUF
                                                             # REM-MASCHINE AUSWERTEN
       eval filename=${pathin[$i]}/${afname}${endin[$i]}
    fi

       # PRUEFEN AUF VORHANDENSEIN
    if [[ $(ls $filename* 2>&1 | grep -c "not found") = 1  || \
          $(ls $filename* 2>&1 | grep -c "No such file") = 1  || \
          $(ls $filename* 2>&1 | grep -c "does not exist") = 1 ]]
    then
          # DATEIEN MIT EXTENSION (Z.B. NC) MUESSEN NICHT ZWINGEND VORHANDEN
          # SEIN, DESHALB IN SOLCHEN FAELLEN KEIN ABBRUCH. DIES IST NUR EINE
          # VORUEBERGEHENDE LOESUNG (OKT 05). NICHT ZWINGEND BENOETIGTE
          # EINGABEDATEIEN SOLLTEN EINE SPEZIELLE OPTION IN DER DATEI-
          # VERBINDUNGSANWEISUNG BEKOMMEN (Z.B. inopt?)
       if [[ "${transin[$i]}" != "locopt" ]]
       then
          printf "\n\n  +++ INPUT-file: "
          if [[ "${extin[$i]}" = "" ]]
          then
             printf "\n           $filename"
          else
             printf "\n           $filename.${extin[$i]}"
          fi
          printf "\n      does not exist\n"
          locat=input; exit
       else
          transin[$i]="unavailable"
       fi
    else

          # ZYKLUSNUMMER FESTSTELLEN
       ls -1 -d $filename    >   filelist  2>/dev/null
       ls -1 -d $filename.*  >>  filelist  2>/dev/null
       while  read zeile
       do
          cycle=$(print $zeile | cut -f2 -d".")
          if [[ "$cycle" = "$zeile" ]]
          then
             (( icycle = 0 ))
          elif [[ "$cycle" = "${extin[$i]}" ]]
          then
             (( icycle = 0 ))
          else
             (( icycle = $cycle ))
          fi
          if (( icycle > maxcycle ))
          then
             (( maxcycle = icycle ))
             file_to_be_used=$zeile
          fi
       done <filelist
       rm filelist

          # EVTL. ZYKLUSNUMMER AN DATEINAMEN ANFUEGEN
       if (( maxcycle > 0 ))
       then
          if [[ "${extin[$i]}" != " "  &&   "${extin[$i]}" != "" ]]
          then
             filename=${filename}.$maxcycle.${extin[$i]}
          else
             filename=${filename}.$maxcycle
          fi
       else
          if [[ "${extin[$i]}" != " "  &&   "${extin[$i]}" != "" ]]
          then
             filename=${filename}.${extin[$i]}
          fi
       fi
       
          # DATEINAMEN OHNE PFAD ABER MIT ZYKLUSNUMMER ABSPEICHERN,
          # DA SPAETER BEI RUECKSPEICHERN VOM ARCHIVSYSTEM EVTL. BENOETIGT
       absnamein[$i]=$filename
       if (( maxcycle > 0 ))
       then
          if [[ "${actionin[$i]}" = di ]]
          then
             frelin[$i]=${endin[$i]}.$maxcycle
          else
             frelin[$i]=${afname}${endin[$i]}.$maxcycle
          fi
       else
          if [[ "${actionin[$i]}" = di ]]
          then
             frelin[$i]=${endin[$i]}
          else
             frelin[$i]=${afname}${endin[$i]}
          fi
       fi

    fi
 done
       

    # VOLLSTAENDIGE DATEINAMEN (OHNE $ ODER ~) DER OUTPUT-FILES BILDEN,
    # OUTPUT-DATEIEN AUF VORHANDENSEIN PRUEFEN UND EVTL. HOECHSTE ZYKLUSNUMMER
    # ERMITTELN ODER, FALLS NICHT VORHANDEN, PRUEFEN, OB SIE SICH ANLEGEN LASSEN
    # DIESE AKTIONEN FINDEN NICHT STATT, WENN PROGRAMM AUF REMOTE-MASCHINE
    # RECHNET UND DATEI ANSCHLIESSEND TRANSFERIERT WERDEN SOLL!
 (( i = 0 ))
 while (( i < iout ))
 do
    (( i = i + 1 ))
    if [[ ! ( $fromhost != $localhost  &&  ( "${actionout[$i]}" = tr || "${actionout[$i]}" = tra || "${actionout[$i]}" = trpe ) ) ]]
    then
       if [[ "${actionout[$i]}" = tr ]]
       then
          actionout[$i]=""
       elif [[ "${actionout[$i]}" = trpe ]]
       then
          actionout[$i]=pe
       elif [[ "${actionout[$i]}" = tra ]]
       then
          actionout[$i]=a
       fi
       (( maxcycle = 0 ))
       eval filename=${pathout[$i]}/${fname}${endout[$i]}
       eval catalogname=${pathout[$i]}
       if [[ $(ls $filename* 2>&1 | grep -c "not found") = 1  || \
             $(ls $filename* 2>&1 | grep -c "No such file") = 1  || \
             $(ls $filename* 2>&1 | grep -c "does not exist") = 1 ]]
       then
      
             # OUTPUT-DATEI NICHT VORHANDEN. PRUEFEN, OB ANLEGEN MOEGLICH.
          if  cat /dev/null > $filename  
          then
             rm  $filename
          else

                # PRUEFEN, OB KATALOG VORHANDEN UND EVTL. DIESEN ANLEGEN
             if [[ ! -d $catalogname ]]
             then
                if  mkdir -p  $catalogname
                then
                   printf "\n\n  *** directory:"
                   printf "\n           $catalogname"
                   printf "\n      was created\n"
                else
                   printf "\n\n  +++ OUTPUT-file:"
                   printf "\n           $filename"
                   printf "\n      cannot be created, because directory does not exist"
                   printf "\n      and cannot be created either"
                   printf "\n"
                   locat=output  ; exit
                fi 2>/dev/null 
             else
                printf "\n\n  +++ OUTPUT-file:"
                printf "\n           $filename"
                printf "\n      cannot be created, although directory exists"
                printf "\n"
                locat=output  ; exit
             fi
          fi 2>/dev/null
       else

             # ZYKLUSNUMMER FESTSTELLEN
          ls -1 -d $filename    >   filelist  2>/dev/null
          ls -1 -d $filename.*  >>  filelist  2>/dev/null
          while  read zeile
          do
             cycle=$(print $zeile | cut -f2 -d".")
             if [[ "$cycle" = "$zeile"  ||  "$cycle" = ${extout[$i]} ]]
             then
                (( icycle = 1 ))
             else
                (( icycle = $cycle + 1 ))
             fi
             if (( icycle > maxcycle ))
             then
                (( maxcycle = icycle ))
             fi
          done <filelist
          rm filelist
       fi

          # EVTL. ZYKLUSNUMMER AN DATEINAMEN ANFUEGEN UND PRUEFEN, OB SICH
          # DATEI AUCH WIRKLICH ANLEGEN LAESST. IM APPEND-FALL MUSS AN DEN
          # HOECHSTEN VORHANDENEN ZYKLUS-ANGEHAENGT WERDEN. ANLAGEPRUEFUNG
          # IST DANN NATUERLICH NICHT ZULAESSIG BZW. MOEGLICH
       if [[ "${actionout[$i]}" != a ]]
       then
          if (( maxcycle > 0 ))
          then
             filename=${filename}.$maxcycle
             if  cat /dev/null > $filename 
             then
                rm  $filename
             else
                printf "\n  +++ OUTPUT-file:"
                printf "\n           $filename"
                printf "\n      cannot be created"
                locat=output  ; exit
             fi
          fi
       else
          (( maxcycle = maxcycle - 1 ))
          if (( maxcycle > 0 ))
          then
             filename=${filename}.$maxcycle
          fi
       fi
       
          # DATEINAMEN OHNE PFAD ABER MIT ZYKLUSNUMMER ABSPEICHERN,
          # DA SPAETER BEI ABLAGE AUF ARCHIVSYSTEM BZW. FUER
          # DATEI OUTPUT_FILE_CONNECTIONS EVTL. BENOETIGT
       pathout[$i]=$filename
       if (( maxcycle > 0 ))
       then
          frelout[$i]=${fname}${endout[$i]}.$maxcycle
       else
          frelout[$i]=${fname}${endout[$i]}
       fi

    fi
 done


     # DAS DVR-PAKET ERFORDERT EINE ENTSPRECHENDE BIBLIOTHEK
 if [[ $(echo $package_list | grep -c dvrp_graphics) != 0 ]]
 then
    if [[ "$dvr_inc" = "" ]]
    then
       printf "\n\n  +++ no value for \"dvr_inc\" given in configuration file"
       printf "\n      This is required for the dvrp_graphics package.\n"
       locat=dvr; exit
    fi
    if [[ "$dvr_lib" = "" ]]
    then
       printf "\n\n  +++ no value for \"dvr_lib\" given in configuration file"
       printf "\n      This is required for the dvrp_graphics package.\n"
       locat=dvr; exit
    fi
 fi


     # PRUEFEN, OB ENTWEDER HAUPTPROGRAMM ODER NUR EIN AUSFUEHRBARES
     # PROGRAMM VEREINBART WURDE (IN DIESEM FALL BRAUCHT IM WEITEREN NICHT
     # UEBERSETZT ZU WERDEN)
 if [[ "$mainprog" = ""  &&  "$executable" = "" ]]
 then
    printf "\n  +++ neither main program nor executable defined"
    locat=source; exit
 elif [[ "$mainprog" != ""  &&  "$executable" != "" ]]
 then
    printf "\n  +++ main program as well as executable defined"
    locat=source; exit
 elif [[ "$mainprog" = ""  &&  "$executable" != "" ]]
 then
    do_compile=false
 fi


    # SOURCE-VERZEICHNIS ZUM AUFSAMMELN DER ZU UEBERSETZENDEN PROGRAMMTEILE
    # ERZEUGEN. HIERHIN WERDEN SPAETER IM FALL VON BATCH-JOBS AUCH DAS MRUN-
    # SCRIPTS SOWIE DIE KONFIGURATIONSDATEI KOPIERT
 if [[ $restart_run != true  &&  "$SOURCES_COMPLETE" = "" ]]
 then
    rm -rf  SOURCES_FOR_RUN_$fname
    mkdir   SOURCES_FOR_RUN_$fname
 fi


    # ALLE ZU UEBERSETZENDEN PROGRAMMTEILE ZUSAMMENSAMMELN
    # BEI BATCH-JOBS IST DIES NICHT NOETIG, WEIL DIE PROGRAMMTEILE BEREITS DURCH
    # DEN MRUN-AUFRUF ERMITTELT SIND, DER DEN BATCH-JOB GENERIERT HAT, UND
    # IM VERZEICHNIS SOURCES_FOR_RUN_... ABGELEGT SIND
 if [[ $do_compile = true  &&  "$SOURCES_COMPLETE" = "" ]]
 then

    [[ "$source_list" = LM ]]  &&  source_list=LOCALLY_MODIFIED
    [[ "$source_list" = WP ]]  &&  source_list=WRITE_PERMIT


       # EVTL. ZU UEBERSETZENDE PROGRAMMTEILE DADURCH BESTIMMEN, DASS GEPRUEFT
       # WIRD, WELCHE DATEIEN WRITE-PERMIT BESITZEN (DATEIEN SOLLTEN DESHALB
       # UNTER RCS-KONTROLLE STEHEN). MIT DER VARIABLEN EXCLUDE KOENNEN
       # BESTIMMTE DATEIEN GRUNDSAETZLICH VON DER UEBERSETZUNG AUSGESCHLOSSEN
       # WERDEN. DIES IST NUR BEI MANUELLEM START VON MRUN DURCH DEN BENUTZER
       # MOEGLICH, DA BEI AUTOMATISCHEN RESTARTS TEST DURCH DIE TATSAECHLICH
       # ZU UBERSETZENDEN DATEIEN ERSETZT IST.
       # ALLE ERMITTELTEN DATEIEN WERDEN IM VERZEICHNIS SOURCES_FOR_RUN_...
       # GESAMMELT
    if [[ "$source_list" = WRITE_PERMIT ]]
    then

       source_list=""
       cd  $source_path


          # ALLE MOEGLICHEN QUELLCODEDATEIEN AUFLISTEN
       Names=$(ls -1 *.f90 2>&1)
       [[ $(echo $Names | grep -c '*.f90') = 0 ]]  &&  Filenames="$Names"
       Names=$(ls -1 *.F90 2>&1)
       [[ $(echo $Names | grep -c '*.F90') = 0 ]]  &&  Filenames="$Filenames $Names"
       Names=$(ls -1 *.F 2>&1)
       [[ $(echo $Names | grep -c '*.F') = 0   ]]  &&  Filenames="$Filenames $Names"
       Names=$(ls -1 *.f 2>&1)
       [[ $(echo $Names | grep -c '*.f') = 0   ]]  &&  Filenames="$Filenames $Names"
       Names=$(ls -1 *.c 2>&1)
       [[ $(echo $Names | grep -c '*.c') = 0   ]]  &&  Filenames="$Filenames $Names"


          # DATEIEN MIT WRITE-PERMIT NACH SOURCES_FOR_RUN_... KOPIEREN
       for  dateiname  in  $Filenames
       do
          if [[ -w $dateiname ]]
          then
             if [[ "$exclude" = ""  ||  $(echo $exclude | grep -c $dateiname) = 0 ]]
             then
                cp  $dateiname  $working_directory/SOURCES_FOR_RUN_$fname
                source_list=$source_list"$dateiname "
             fi
          fi
       done

       cd -  > /dev/null


    elif [[ "$source_list" = LOCALLY_MODIFIED ]]
    then

          # MODIFIZIERTE DATEIEN DER SVN-ARBEITSKOPIE BESTIMMEN
       source_list=""
       cd  $source_path


          # PRUEFEN, OB VERZEICHNIS UEBERHAUPT UNTER SVN-KONTROLLE STEHT
       if [[ ! -d .svn ]]
       then
          printf "\n\n  +++ source directory"
          printf "\n         \"$source_path\" "
          printf "\n         is not under control of \"subversion\"."
          printf "\n         Please do not use mrun-option \"-s LOCALLY_MODIFIED\"\n"
       fi


          # ALLE MODIFIZIERTEN QUELLCODEDATEIEN AUFLISTEN
       Filenames=""
       svn status  >  tmp_mrun
       while  read line
       do
          firstc=`echo $line | cut -c1`
          if [[ $firstc = M  ||  $firstc = "?" ]]
          then
             Name=`echo "$line" | cut -c8-`
             extension=`echo $Name | cut -d. -f2`
             if [[ "$extension" = f90 || "$extension" = F90 || "$extension" = f || "$extension" = F || "$extension" = c ]]
             then
                Filenames="$Filenames "$Name
             fi
          fi
       done < tmp_mrun


          # DATEIEN NACH SOURCES_FOR_RUN_... KOPIEREN
       for  dateiname  in  $Filenames
       do
          cp  $dateiname  $working_directory/SOURCES_FOR_RUN_$fname
          source_list=$source_list"$dateiname "
       done

       cd -  > /dev/null


       # MITTELS OPTION -s ANGEGEBENE DATEIEN NACH SOURCES_FOR_RUN_... KOPIEREN
       # BEI AUTOMATISCHEN FORTSETZUNGSLAEUFEN SIND DORT SCHON ALLE DATEIEN
       # VORHANDEN
    elif [[ "$source_list" != ""  &&  $restart_run != true ]]
    then

       cd  $source_path

       for  filename  in  $source_list
       do

             # QUELLTEXT-DATEI DARF KEINE PFADE BEINHALTEN
          if [[ $(print $filename | grep -c "/") != 0 ]]
          then
             printf "\n  +++ source code file:  $filename"
             printf "\n      must not contain (\"/\") "
             locat=source; exit
          fi

          if [[ ! -f $filename ]]
          then
             printf "\n  +++ source code file:  $filename"
             printf "\n      does not exist"
             locat=source; exit
          else
             cp  $filename  $working_directory/SOURCES_FOR_RUN_$fname
          fi

       done

       cd -  > /dev/null

    fi


       # PRUEFEN, OB ENTWEDER HAUPTPROGRAMM VORHANDEN UND ES EVTL. IN DER
       # LISTE DER ZU UEBERSETZENDEN PROGRAMMTEILE MIT ENTHALTEN IST (WENN
       # NICHT, WIRD ES DIESER LISTE HINZUGEFUEGT)
    if [[ $restart_run != true ]]
    then

       if [[ ! -f "$source_path/$mainprog" ]]
       then
          printf "\n\n  +++ main program:  $mainprog"
          printf "\n      does not exist in source directory"
          printf "\n      \"$source_path\"\n"
          locat=source; exit
       else
          if [[ $(echo $source_list | grep -c $mainprog) = 0 ]]
          then
             cp  $source_path/$mainprog  SOURCES_FOR_RUN_$fname
             source_list=${mainprog}" $source_list"
          fi
       fi
    fi


       # MAKEFILE AUF VORHANDENSEIN PRUEFEN UND KOPIEREN
       # BEI RESTART-LAEUFEN LIEGT ES SCHON IM VERZEICHNIS SOURCES_FOR_RUN...
    if [[ "$restart_run" != true ]]
    then
       [[ "$makefile" = "" ]]  &&  makefile=$source_path/Makefile
       if [[ ! -f $makefile ]]
       then
          printf "\n  +++ file \"$makefile\" does not exist"
          locat=make; exit
       else
          cp  $makefile  SOURCES_FOR_RUN_$fname/Makefile 
       fi
    fi


       # DATEIEN AUS ZUSAETZLICHEM QUELLVERZEICHNIS HINZUFUEGEN
    if [[ $restart_run != true  &&  "$add_source_path" != "" ]]
    then

          # GIBT ES DAS VERZEICHNIS UEBERHAUPT?
       if [[ ! -d $add_source_path ]]
       then
          printf "\n\n  +++ WARNING: additional source code directory"
          printf "\n      \"$add_source_path\" "
          printf "\n      does not exist or is not a directory."
          printf "\n      No source code will be used from this directory!\n"
          add_source_path=""
          sleep 3
       else

          cd $add_source_path
          found=false

          Names=$(ls -1 *.f90 2>&1)
          [[ $(echo $Names | grep -c '*.f90') = 0 ]]  &&  AddFilenames="$Names"
          Names=$(ls -1 *.F90 2>&1)
          [[ $(echo $Names | grep -c '*.F90') = 0 ]]  &&  AddFilenames="$AddFilenames $Names"
          Names=$(ls -1 *.F 2>&1)
          [[ $(echo $Names | grep -c '*.F') = 0   ]]  &&  AddFilenames="$AddFilenames $Names"
          Names=$(ls -1 *.f 2>&1)
          [[ $(echo $Names | grep -c '*.f') = 0   ]]  &&  AddFilenames="$AddFilenames $Names"
          Names=$(ls -1 *.c 2>&1)
          [[ $(echo $Names | grep -c '*.c') = 0   ]]  &&  AddFilenames="$AddFilenames $Names"

          cd -  > /dev/null
          cd  SOURCES_FOR_RUN_$fname

             # COPY MAKEFILE IF EXISTING
          if [[ -f $add_source_path/Makefile ]]
          then
             printf "\n\n  *** user Makefile from directory"
             printf "\n      \"$add_source_path\" is used \n"
             sleep 1
             cp  $add_source_path/Makefile  .
          fi

          for  dateiname  in  $AddFilenames
          do
             if [[ -f $dateiname ]]
             then
                printf "\n  +++ source code file \"$dateiname\" found in additional"
                printf "\n      source code directory \"$add_source_path\" "
                printf "\n      but was also given with option \"-s\" which means that it should be taken"
                printf "\n      from directory \"$source_path\"."
                locat=source; exit
             fi

             cp  $add_source_path/$dateiname  .
             source_list="$source_list $dateiname"

                # CHECK IF FILE IS CONTAINED IN MAKEFILE
             if [[ $(grep -c $dateiname Makefile) = 0 ]]
             then
                printf "\n\n  +++ user file \"$dateiname\" "
                printf "\n      is not listed in Makefile \n"
                locat=source; exit
             else

                # Default User-Interface von der Liste entfernen, falls Datei
                # ein User-Interface enthaelt
#             if [[ $( cat $dateiname | grep -c "END SUBROUTINE user_parin" ) != 0 ]]
#             then
#                if [[ $dateiname != user_interface.f90  &&  -f user_interface.f90 ]]
#                then
#                   rm -rf  user_interface.f90
#                   source_list=`echo $source_list | sed -e 's/user_interface.f90//'`
#                   printf "\n\n  *** default \"user_interface.f90\" removed from the files to be translated"
#                   printf "\n      since a user-interface is found in file"
#                   printf "\n      \"$add_source_path/$dateiname\" \n"
#                   sleep 3
#                else
                if [[ $found = false ]]
                then
                   found=true
                   printf "\n\n  *** following user file(s) added to the"
                   printf " files to be translated:\n      "
                fi
                printf "$dateiname  "
                sleep 0.5
             fi
          done
          [[ $found = true ]]  &&  printf "\n"
          cd -  > /dev/null
       fi
    fi


       # ALLE UNTERPROGRAMME, DIE ZU VEREINBARTEN SOFTWAREPAKETEN GEHOEREN,
       # DER LISTE DER ZU UEBERSETZENDEN DATEIEN HINZUFUEGEN
    if [[ $restart_run != true  &&  -n $package_list ]]
    then

       cd  $source_path

       for  package  in  $package_list
       do

          [[ $package = "dvrp_graphics+1PE" ]]  &&  package=dvrp_graphics

             # ERMITTELE ALLE DATEIEN, DIE ZUM PAKET GEHOEREN
             # FEHLERMELDUNGEN WERDEN ABGEFANGEN, DA * AUCH VERZEICHNISSNAMEN
             # LIEFERT
          package_source_list=`grep "defined( __$package " * 2>/dev/null | cut -f1 -d:`


             # FUEGE DIESE DATEIEN DER LISTE DER ZU UEBERSETZENDEN DATEIEN
             # HINZU, FALLS SIE NOCH NICHT DAZUGEHOEREN
          for  source_list_name  in  $package_source_list
          do
             if [[ $(echo $source_list | grep -c $source_list_name) = 0 ]]
             then

                    # NUR DATEIEN MIT GUELTIGEN ENDUNGEN VERWENDEN
                ending=`echo $source_list_name | cut -f2 -d.`
                if [[ "$ending" = f90  ||  "$ending" = F90  ||  "$ending" = f  ||  "$ending" = F  ||  "$ending" = c ]]
                then
                   cp  $source_list_name  $working_directory/SOURCES_FOR_RUN_$fname
                   source_list="$source_list $source_list_name"
                fi
             fi
          done
       done

       cd -  > /dev/null
    fi


       # MAKEFILE AUF VORHANDENSEIN PRUEFEN UND KOPIEREN
       # BEI RESTART-LAEUFEN LIEGT ES SCHON IM VERZEICHNIS SOURCES_FOR_RUN...
#    if [[ "$restart_run" != true ]]
#    then
#       [[ "$makefile" = "" ]]  &&  makefile=$source_path/Makefile
#       if [[ ! -f $makefile ]]
#       then
#          printf "\n  +++ file \"$makefile\" does not exist"
#          locat=make; exit
#       else
#          cp  $makefile  SOURCES_FOR_RUN_$fname/Makefile 
#       fi
#    fi

 fi  # do_compile=true


    # FALLS PROGRAMMTEILE UEBERSETZT WERDEN SOLLEN, FOLGEN JETZT EINIGE
    # UEBERPRUEFUNGEN UND DAS SETZEN DER PRAEPROZESSOR-DIREKTIVEN
 if [[ $do_compile = true ]]
 then

       # PRAEPROZESSOR-DIREKTIVEN ZUM SELEKTIVEN AUSWAEHLEN VON CODETEILEN
       # ZUSAMMENSETZEN
       # DIREKTIVEN ZUM AKTIVIEREN VON RECHNERSPEZIFISCHEM CODE
    if [[ $(echo $localhost | cut -c1-3) = ibm ]]
    then
       cpp_options="${cpp_options},-D__ibm=__ibm"
    elif [[ $(echo $localhost | cut -c1-3) = nec ]]
    then
       cpp_options="$cpp_options -D__nec"
    elif [[ $(echo $localhost | cut -c1-2) = lc ]]
    then
       cpp_options="$cpp_options -D__lc"
    else
       cpp_options="$cpp_options -D__$localhost"
    fi

       # DIREKTIVEN DIE DURCH OPTION -K BESTIMMT WERDEN (Z.B. PARALLEL)
    if [[ $(echo $localhost | cut -c1-3) = ibm ]]
    then
       [[ -n $cond1 ]]  &&  cpp_options="${cpp_options},-D__$cond1=__$cond1"
       [[ -n $cond2 ]]  &&  cpp_options="${cpp_options},-D__$cond2=__$cond2"
    else
       [[ -n $cond1 ]]  &&  cpp_options="$cpp_options -D__$cond1"
       [[ -n $cond2 ]]  &&  cpp_options="$cpp_options -D__$cond2"
    fi

       # DIREKTIVEN DIE SOFTWAREPAKETE AKTIVIEREN (OPTION -p)
    if [[ -n $package_list ]]
    then
       for  package  in  $package_list
       do
          if [[ $(echo $localhost | cut -c1-3) = ibm ]]
          then
             if [[ $package != "dvrp_graphics+1PE" ]]
             then
                cpp_options="${cpp_options},-D__$package=__$package"
             else
                cpp_options="${cpp_options},-D__dvrp_graphics=__dvrp_graphics"
                export use_seperate_pe_for_dvrp_output=true
             fi
          else
             if [[ $package != "dvrp_graphics+1PE" ]]
             then
                cpp_options="$cpp_options -D__$package"
             else
                cpp_options="$cpp_options -D__dvrp_graphics"
                export use_seperate_pe_for_dvrp_output=true
             fi
          fi
       done
    fi

       # DIREKTIVEN DIE DURCH OPTION -D FESTGELEGT SIND
    if [[ -n $cpp_opts ]]
    then
       for  popts  in  $cpp_opts
       do
          if [[ $(echo $localhost | cut -c1-3) = ibm ]]
          then
             cpp_options="${cpp_options},-D__$popts=__$popts"
          else
             cpp_options="$cpp_options -D__$popts"
          fi
       done
    fi

 else


       # BEI LOKALEN RECHNUNGEN PRUEFEN, OB EXECUTABLE VORHANDEN
    if [[ $do_remote = false ]]
    then
       if [[ ! -f $executable ]]
       then
          printf "\n  +++ executable file:  $executable"
          printf "\n      does not exist"
          locat=executable; exit
       fi
    fi
 fi


    # JOBMODUS FESTSTELLEN 
 if [[ "$ENVIRONMENT" = BATCH ]]
 then
    jobmo=BATCH
 else
    jobmo=INTERACTIVE
 fi


    # no interactive runs on lctit
 if [[ $host = lctit  &&  $jobmo = INTERACTIVE  &&  $do_batch = false ]]
 then
    printf "\n  +++ no interactive runs allowed on host \"$host\" "
    printf "\n      please submit batch job using mrun option \"-b\" \n"
    locat=normal; exit
 fi


    # HOSTSPEZIFISCHE DEFAULT-COMPILER SETZEN, FALLS NICHT BEREITS
    # DURCH BENUTZER ANDERWEITIG VEREINBART
 if [[ "$compiler_name" = "" ]]
 then

    printf "\n  +++ no compiler specified for \"$host $cond1 $cond2\""
    locat=compiler_name; exit

 fi


    # COMPILER AUF RIAMS NEC UEBERSCHREIBEN
 [[ $localhost = necriam ]]  &&  compiler_name=mpif90



    # TEMPORAEREN KATALOGNAMEN BESTIMMEN
 kennung=$RANDOM
 if [[ "$tmp_user_catalog" = "" ]]
 then
    if [[ $localhost = ibmh ]]
    then
       tmp_user_catalog=$SCRATCH
    elif [[ $localhost = nech ]]
    then
       tmp_user_catalog=$WRKSHR
    else
       tmp_user_catalog=/tmp
    fi
 fi
 TEMPDIR=$tmp_user_catalog/${usern}.$kennung


    # KATALOGNAMEN FUER ZWISCHENSPEICHERUNG VON FORTSETZUNGSLAUFDATEIEN
    # BESTIMMEN
 if [[ "$tmp_data_catalog" = "" ]]
 then
    if [[ $localhost = nech ]]
    then
       tmp_data_catalog=$WRKSHR/mrun_restart_data
    else
       tmp_data_catalog=/tmp/mrun_restart_data
    fi
 fi


    # EVENTUELL BEI LOKALEN RECHNUNGEN $-ZEICHEN IN ENVIRONMENT-VARIABLEN
    # ERSETZEN
 if [[ $do_remote = false  &&  $do_compile = true ]]
 then
    eval  fopts=\"$fopts\"
    eval  lopts=\"$lopts\"
 fi



    # COMPILE- UND LINK-OPTIONEN BESTIMMEN
 fopts="$fopts $netcdf_inc $dvr_inc"
 lopts="$lopts $netcdf_lib $dvr_lib"
 ROPTS="$ropts"
 if [[ ( $(echo $host | cut -c1-3) = nec  ||  $(echo $host | cut -c1-3) = ibm  ||  $host = lckyoto  ||  $host = lcsgih  ||  $host = lcsgib  ||  $host = lctit  ||  $host = lcfimm  ||  $host = lcxt4 ||  $host = lcxt5m || $host = lck )  &&  -n $numprocs ]]
 then
    XOPT="-X $numprocs"
 fi



    # PRUEFEN DER CPU-ZEIT. (CPUMAX WIRD ALS ENV-VARIABLE VOM HAUTPRO-
    # GRAMM BENOETIGT
 done=false
 while [[ $done = false ]]
 do
    cputime=$cpumax
    if (( $cputime == 0 ))
    then
       if [[ $do_batch = true ]]
       then
          printf "\n  +++ cpu-time is undefined"
          printf "\n  >>> Please type CPU-time in seconds as INTEGER:"
          printf "\n  >>> "
          read  cputime  1>/dev/null  2>&1
       else
          cputime=10000000   # NO CPU LIMIT FOR INTERACTIVE RUNS
       fi
    else
       done=true
    fi
    cpumax=$cputime
 done

 (( minuten = cputime / 60 ))
 (( sekunden = cputime - minuten * 60 ))


    # PRUEFEN DER KERNSPEICHERANFORDERUNG
 if [[ $do_batch = true ]]
 then
    done=false
    while [[ $done = false ]]
    do
       if (( memory == 0 ))
       then
          printf "\n  +++ memory demand is undefined"
          printf "\n  >>> Please type memory in  MByte per process  as INTEGER:"
          printf "\n  >>> "
          read  memory  1>/dev/null  2>&1
       else
          done=true
       fi
    done
 fi


    # PRUEFEN, OB FUER REMOTE-RECHNUNGEN EIN BENUTZERNAME ANGEGEBEN WURDE
 if [[ $do_remote = true  &&  -z $remote_username ]]
 then
    while [[ -z $remote_username ]]
    do
       printf "\n  +++ username on remote host \"$host\" is undefined"
       printf "\n  >>> Please type username:"
       printf "\n  >>> "
       read  remote_username
    done
    mc="$mc -u$remote_username"
 fi


    # set module load command and export for subjob
 if [[ "$modules" != "" ]]
 then
    export module_calls="module load ${modules};"
 fi

    # bugfix for wrong netcdf module
 if [[ $host = lcsgib  ||  $host = lcsgih ]]
 then
    if [[ $(echo $module_calls | grep -c netcdf/3.6.3-intel) != 0 ]]
    then
       export module_calls="$module_calls export LD_LIBRARY_PATH=/sw/dataformats/netcdf/3.6.3-intel/lib:\$LD_LIBRARY_PATH;"
    fi
 fi


    # SET DEFAULT VALUE FOR MPI MODULE TO BE USED ON SGI-ALTIX
 if [[ $host = lcsgib  ||  $host = lcsgih ]]
 then
    if [[ $(echo $modules | grep -c mpt ) != 0 ]]
    then
       mpilib=mpt
    elif [[ $(echo $modules | grep -c mvapich ) != 0 ]]
    then
       mpilib=mvapich
    fi
 fi



###########################################################################
# HEADER-AUSGABE
###########################################################################


 calltime=$(date)
 printf "\n"
# [[ $silent = false ]]  &&  clear
 printf "#--------------------------------------------------------------# \n"
 printf "| $version$calltime | \n"
 printf "|                                                              | \n"
 spalte1="called on:"; spalte2=$localhost_realname
 printf "| $spalte1$spalte2 | \n"
 if [[ $local_compile = false ]]
 then
    if [[ $do_remote = true ]]
    then
       spalte1="execution on:"; spalte2="$host (username: $remote_username)"
    else
       spalte1="execution on:"; spalte2="$host ($localhost_realname)"
    fi
 else
    spalte1="compiling test only!"; spalte2=""
 fi
 printf "| $spalte1$spalte2 | \n"
 if [[ -n $numprocs ]]
 then
    spalte1="number of PEs:"; spalte2=$numprocs
    printf "| $spalte1$spalte2 | \n"
 fi
 if [[ -n $tasks_per_node ]]
 then
    spalte1="tasks per node:"; spalte2="$tasks_per_node (number of nodes: $nodes)"
    printf "| $spalte1$spalte2 | \n"
 fi
 if [[ $use_openmp = true ]]
 then
    spalte1="threads per task:"; spalte2="$threads_per_task"
    printf "| $spalte1$spalte2 | \n"
 fi
 printf "|                                                              | \n"
 if [[ $do_compile = true ]]
 then
    if [[ "$mopts" != "" ]]
    then
       spalte1="make options:"; spalte2=$mopts
       printf "| $spalte1$spalte2 | \n"
       zeile=$(echo "$mopts" | cut -c41-)
       while [[ "$zeile" != "" ]]
       do
          spalte1=""
          spalte2=$zeile
          printf "| $spalte1$spalte2 | \n"
          zeile=$(echo "$zeile" | cut -c41-)
       done
    fi

    spalte1="cpp directives:"; spalte2=$cpp_options
    printf "| $spalte1$spalte2 | \n"
    zeile=$(echo "$cpp_options" | cut -c41-)
    while [[ "$zeile" != "" ]]
    do
       spalte1=""
       spalte2=$zeile
       printf "| $spalte1$spalte2 | \n"
       zeile=$(echo "$zeile" | cut -c41-)
    done

    spalte1="compiler options:"; spalte2="$fopts"
    printf "| $spalte1$spalte2 | \n"
    zeile=$(echo "$fopts" | cut -c41-)
    while [[ "$zeile" != "" ]]
    do
       spalte1=""
       spalte2=$zeile
       printf "| $spalte1$spalte2 | \n"
       zeile=$(echo "$zeile" | cut -c41-)
    done

    spalte1="linker options:"; spalte2=$lopts
    printf "| $spalte1$spalte2 | \n"
    zeile=$(echo "$lopts" | cut -c41-)
    while [[ "$zeile" != "" ]]
    do
       spalte1=""
       spalte2=$zeile
       printf "| $spalte1$spalte2 | \n"
       zeile=$(echo "$zeile" | cut -c41-)
    done

    spalte1="modules to be load:"; spalte2=$modules
    printf "| $spalte1$spalte2 | \n"
    zeile=$(echo "$modules" | cut -c41-)
    while [[ "$zeile" != "" ]]
    do
       spalte1=""
       spalte2=$zeile
       printf "| $spalte1$spalte2 | \n"
       zeile=$(echo "$zeile" | cut -c41-)
    done

    spalte1="main program":; spalte2=$mainprog
    printf "| $spalte1$spalte2 | \n"
 else
    spalte1=executable:; spalte2=$executable
    printf "| $spalte1$spalte2 | \n"
 fi
 printf "|                                                              | \n"
 spalte1="base name of files":; spalte2=$fname
 printf "| $spalte1$spalte2 | \n"
 if [[ $fname != $afname ]]
 then
    spalte1="base name of input files":; spalte2=$afname
    printf "| $spalte1$spalte2 | \n"
 fi
 spalte1="INPUT control list":; spalte2=$input_list
 printf "| $spalte1$spalte2 | \n"
 spalte1="OUTPUT control list":; spalte2=$output_list
 printf "| $spalte1$spalte2 | \n"

 if [[ $do_batch = true  ||  "$LOADLBATCH" = yes ]]
 then
    spalte1="memory demand / PE":; spalte2="$memory MB"
    printf "| $spalte1$spalte2 | \n"
    spalte1=CPU-time:; spalte2="$minuten:$sekunden"
    printf "| $spalte1$spalte2 | \n"
 fi

 if [[ $do_compile = true ]]
 then
    printf "|                                                              | \n"
    printf "| Files to be compiled:                                        | \n"
    zeile=$source_list
    while [[ "$zeile" != "" ]]
    do
       spalte3=$zeile
       printf "| $spalte3 | \n"
       zeile=$(echo "$zeile" | cut -c61-)
    done
 fi
 printf "#--------------------------------------------------------------#"



    # BEDINGTE AUSGABE DER DATEIVERBINDUNGEN
 if [[ $do_trace = true ]]
 then
    (( i = 0 ))
    while (( i < iin ))
    do
       (( i = i + 1 ))
       if (( i == 1 ))
       then
          printf "\n\n >>> INPUT-file assignments:\n"
       fi
       printf "\n     ${localin[$i]} :  ${absnamein[$i]}"
    done
    (( i = 0 ))
    while (( i < iout ))
    do
       (( i = i + 1 ))
       if (( i == 1 ))
       then
          printf "\n\n >>> OUTPUT-file assignments:\n"
       fi
       printf "\n     ${localout[$i]} :  ${pathout[$i]}"
    done
    (( i = 0 ))
    while (( i < iic ))
    do
       (( i = i + 1 ))
       if (( i == 1 ))
       then
          printf "\n\n >>> INPUT-commands:\n"
       fi
       printf "\n     ${in_command[$i]}" 
    done
    (( i = 0 ))
    while (( i < ioc ))
    do
       (( i = i + 1 ))
       if (( i == 1 ))
       then
          printf "\n\n >>> OUTPUT-commands:\n"
       fi
       printf "\n     ${out_command[$i]}" 
    done
 fi


    # ABFRAGEN BEI AUFRUF AUF LOKALER MASCHINE 
 if [[ $remotecall = false  &&  $silent = false  &&  $jobmo != BATCH ]]
 then
    antwort=dummy
    printf "\n\n"
    while [[ "$antwort" != y  &&  "$antwort" != Y  &&  "$antwort" != n  &&  "$antwort" != N ]]
    do
       printf " >>> everything o.k. (y/n) ?  "
       read  antwort
    done
    if [[ $antwort = n  ||  $antwort = N ]]
    then
       locat=user_abort; (( iec = 0 )); exit
    fi
    if [[ $do_batch = true ]]
    then
       printf " >>> batch-job will be created and submitted"
    else
       if [[ $local_compile = false ]]
       then
          printf " >>> MRUN will now continue to execute on this machine"
       else
          printf " >>> a test compilation will now be carried out on this machine"
       fi
    fi
 fi
 



     # FALLS AUF DIESER MASCHINE GERECHNET WERDEN SOLL, WERDEN JETZT ENTSPRE-
     # CHENDE AKTIONEN DURCHGEFUEHRT
 if [[ $do_batch = false ]]
 then


       # TEMPORAEREN KATALOG ERZEUGEN
    mkdir -p  $TEMPDIR
    chmod  go+rx  $TEMPDIR
    tmpcreate=true

       # set striping on lustre file system
#    if [[ $localhost = lcsgih ]]
#    then
#       lfs setstripe -s 8192k -c 16  $TEMPDIR
#       lfs getstripe $TEMPDIR
#    fi


       # SAEMTLICHE QUELLTEXT-DATEIEN BZW. AUSFUEHRBARES PROGRAMM IN 
       # TEMPORAERES VERZEICHNIS KOPIEREN
    if [[ $do_compile = true ]]
    then

          # ON NEC, COMPILATION IS DONE ON HOST CROSS VIA CROSS COMPILING
          # CREATE A TEMPORARY DIRECTORY ON THAT MACHINE (HOME MOUNTED VIA NFS)
       if [[ $localhost = nech ]]
       then
          TEMPDIR_COMPILE=$HOME/work/${usern}.$kennung
          if  mkdir -p  $TEMPDIR_COMPILE
          then
             printf "\n  *** \"$TEMPDIR_COMPILE\" "
             printf "\n      is generated as temporary directory for cross compiling\n"
          else
             printf "\n  +++ creating directory \"$TEMPDIR_COMPILE\" "
             printf "\n      needed for cross compilation failed"
             locat=compile
             exit
          fi
       else
          TEMPDIR_COMPILE=$TEMPDIR
       fi


          # PFADNAMEN FUER DAS MAKE-DEPOSITORY ERMITTELN
       line=""
       grep "%depository_path" $config_file  >  tmp_mrun
       while read line
       do
          if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
          then
             if [[ "$(echo $line | cut -d" " -s -f3)" = "" ]]
             then
                global_depository_path=`echo $line | cut -d" " -s -f2`
             fi
          fi
       done < tmp_mrun

       line=""
       grep  " $localhost" $config_file | grep "%depository_path"  >  tmp_mrun
       while read line
       do
          if [[ "$line" != ""  &&  $(echo $line | cut -c1) != "#" ]]
          then
             if [[ "$(echo $line | cut -d" " -s -f4)" = "$cond1"  &&  "$(echo $line | cut -d" " -s -f5)" = "$cond2" ]]
             then
                local_depository_path=`echo $line | cut -d" " -s -f2`
             fi
          fi
       done < tmp_mrun

       if [[ "$local_depository_path" = "" ]]
       then
          if [[ "$global_depository_path" != "" ]]
          then
             local_depository_path=$global_depository_path
          else
             printf "\n\n  +++ no depository path found in configuration file"
             printf "\n      for local host \"$localhost\" "
             printf "\n      please set \"\%depository_path\" in configuration file\n"
             locat=config_file; exit
          fi
       fi
       eval local_depository_path=$local_depository_path
       [[ "$cond1" != "" ]]  &&  local_depository_path=${local_depository_path}_$cond1
       [[ "$cond2" != "" ]]  &&  local_depository_path=${local_depository_path}_$cond2


       basename=`print $mainprog | cut -f1 -d"."`
       eval make_depository=${local_depository_path}/${basename}_current_version.tar
       if [[ ! -f $make_depository ]]
       then
          printf "\n"
          printf "\n  *** WARNING: make depository \"$make_depository\" not found"
          printf "\n               \"make\" will fail, if the Makefile or other source files are missing\n"
       else
          cp  $make_depository  $TEMPDIR_COMPILE
          cd  $TEMPDIR_COMPILE
          tar -xf  $make_depository  >  /dev/null  2>&1
          cd -  > /dev/null
       fi

       cp  SOURCES_FOR_RUN_$fname/*  $TEMPDIR_COMPILE

    else

       cp  $executable   ${TEMPDIR}/a.out

    fi


       # WECHSEL IN TEMPORAEREN KATALOG
    cd  $TEMPDIR
    printf "\n  *** changed to temporary directory: $TEMPDIR"


       # OUTPUT-DATEI-VERBINDUNGEN AUF TEMPORAERER DATEI ABLEGEN
       # DIESE DATEI KANN VON SPAETER AUFZURUFENDEN BENUTZERPROZEDUREN GELESEN
       # WERDEN, UM ZU LOKALEN DATEINAMEN GEHOERENDE PERMANENTE NAMEN ZU
       # ERMITTELN
    (( i = 0 ))
    while (( i < iout ))
    do
       (( i = i + 1 ))
       if [[ "${actionout[$i]}" = tr  ||  "${actionout[$i]}" = tra  ||  "${actionout[$i]}" = trpe ]]
       then
          printf "${localout[$i]} ${actionout[$i]}\n${pathout[$i]}\n${localhost}_${fname}${endout[$i]}\n" >> OUTPUT_FILE_CONNECTIONS
       else
          printf "${localout[$i]} ${actionout[$i]}\n${pathout[$i]}\n${frelout[$i]}\n" >> OUTPUT_FILE_CONNECTIONS
       fi
    done


       # EVTL. UEBERSETZUNGSAKTIONEN STARTEN
    if [[ $do_compile = true ]]
    then


          # COMPILING WITH MAKE (ON NEC COMPILER IS CALLED ON HOST CROSS)
       printf "\n\n\n  *** compilation starts \n$striche\n"
       printf "  *** compilation with make using following options:\n"
       printf "      make depository:          $make_depository"
       if [[ "$mopts" != "" ]]
       then
          printf "      make options:             $mopts\n"
       fi
       printf "      compilername:             $compiler_name\n"
       printf "      compiler options:         $fopts\n"
       printf "      preprocessor directives:  $cpp_options \n"
       printf "      linker options:           $lopts \n"
       if [[ "$modules" != "" ]]
       then
          printf "      modules to be load:       $modules \n"
       fi
       printf "      source code files:        $source_list \n"

       if [[ $localhost = nech ]]
       then
          ssh  136.172.44.192 -l $usern ". /SX/opt/etc/initsx.sh; $module_calls cd \$HOME/work/${usern}.$kennung; sxmake $mopts -f Makefile PROG=a.out  F90=$compiler_name  COPT=\"$cpp_options\"  F90FLAGS=\"$fopts\"  LDFLAGS=\"$lopts\" "
          cp  $TEMPDIR_COMPILE/a.out  .
          [[ $? != 0 ]]  &&  compile_error=true
          rm -rf  $TEMPDIR_COMPILE
       elif [[ $localhost = ibmh ]]
       then
          printf "      compiler is called via ssh on \"plogin1\" \n"
          ssh  plogin1  -l $usern  "export PATH=/sw/ibm/xlf/12.1.0.3/usr/bin:$PATH; $module_calls cd $TEMPDIR; make $mopts -f Makefile PROG=a.out  F90=$compiler_name  COPT=\"$cpp_options\"  F90FLAGS=\"$fopts\"  LDFLAGS=\"$lopts\" "
          [[ ! -f a.out ]]  &&  compile_error=true
          continue   # ANDERENFALLS IST STATUS=1, FALLS A.OUT VORHANDEN
       elif [[ $localhost = lcsgib ]]
       then
          printf "      compiler is called via ssh on \"bicegate0\" \n"
          ssh  bicegate0  -l $usern  ". /usr/share/modules/init/bash; $module_calls cd $TEMPDIR; make $mopts -f Makefile PROG=a.out  F90=$compiler_name  COPT=\"$cpp_options\"  F90FLAGS=\"$fopts\"  LDFLAGS=\"$lopts\" "
          [[ ! -f a.out ]]  &&  compile_error=true
          continue   # ANDERENFALLS IST STATUS=1, FALLS A.OUT VORHANDEN
       elif [[ $localhost = lcsgih ]]
       then
          printf "      compiler is called via ssh on \"hicegate0\" \n"
          ssh  hicegate0    -l $usern  ". /usr/share/modules/init/bash; $module_calls cd $TEMPDIR; make $mopts -f Makefile PROG=a.out  F90=$compiler_name  COPT=\"$cpp_options\"  F90FLAGS=\"$fopts\"  LDFLAGS=\"$lopts\" 2>&1 "
          [[ ! -f a.out ]]  &&  compile_error=true
          continue   # ANDERENFALLS IST STATUS=1, FALLS A.OUT VORHANDEN
       else
          [[ $localhost = lcxt4 ]]  &&  . /opt/modules/default/init/ksh
          [[ "$module_calls" != "" ]]  &&  eval $module_calls
          make $mopts -f Makefile PROG=a.out  F90=$compiler_name  COPT="$cpp_options"  F90FLAGS="$fopts"  LDFLAGS="$lopts"
       fi

       if [[ $? != 0  ||  "$compile_error" = true  ||  "$module_compile_error" = true ]]
       then
          printf "\n  +++ error occured while compiling or linking"
          locat=compile

  # WORKAROUND: REMOVE IF CONSTRUCT LATER, BUT KEEP THE EXIT!
#          if [[ $localhost != lcsgib  &&  $localhost != lcsgih ]]
#          then
             exit
#          else
#             locat=normal
#          fi
       else
          printf "$striche\n  *** compilation finished \n"
       fi
    fi


       # FALLS NUR TESTWEISE KOMPILIERT WERDEN SOLLTE, IST MRUN JETZT FERTIG
    if [[ $local_compile = true ]]
    then
       cd  $HOME
       rm -rf $TEMPDIR
       locat=local_compile; exit
    fi


       # BEREITSTELLEN DER INPUT-DATEIEN
       # SCHLEIFE UEBER ALLE VOM BENUTZER ANGEGEBENEN DATEIEN
    (( i = 0 ))
    while (( i < iin ))
    do
       (( i = i + 1 ))
       if (( i == 1 ))
       then
          printf "\n\n  *** providing INPUT-files:\n$striche"
       fi


          # OPTIONALE DATEIEN BEI NICHTVORHANDENSEIN UEBERGEHEN
       if [[ "${transin[$i]}" = unavailable ]]
       then
          if [[ "${extin[$i]}" = ""  ||  "${extin[$i]}" = " " ]]
          then
             printf "\n  +++ WARNING: input file \"${pathin[$i]}/${afname}${endin[$i]}\" "
             printf "\n               is not available!"
          else
             printf "\n  +++ WARNING: input file \"${pathin[$i]}/${afname}${endin[$i]}.${extin[$i]}\" "
             printf "\n               is not available!"
          fi
          continue
       fi

          # PRUEFEN, OB EINZELDATEI ODER DATEI PRO PROZESSOR
       files_for_pes=false; datentyp=file
       if [[ "${actionin[$i]}" = pe  &&  -n $numprocs ]]
       then
          files_for_pes=true; datentyp=directory
          actionin[$i]=""
       elif [[ "${actionin[$i]}" = pe  &&  ! -n $numprocs ]]
       then
          actionin[$i]=""
       elif [[ "${actionin[$i]}" = arpe  &&  -n $numprocs ]]
       then
          files_for_pes=true; datentyp=directory
          actionin[$i]="ar"
       elif [[ "${actionin[$i]}" = arpe  &&  ! -n $numprocs ]]
       then
          actionin[$i]="ar"
       elif [[ "${actionin[$i]}" = flpe  &&  -n $numprocs ]]
       then
          files_for_pes=true; datentyp=directory
          actionin[$i]="fl"
       elif [[ "${actionin[$i]}" = flpe  &&  ! -n $numprocs ]]
       then
          actionin[$i]="fl"
       fi

       if [[ $files_for_pes = true ]]
       then
          printf "\n  >>> INPUT: ${absnamein[$i]}/....  to  ${localin[$i]}"
       else
          printf "\n  >>> INPUT: ${absnamein[$i]}  to  ${localin[$i]}"
       fi

          # INPUT-DATEI FUER EINEN FORTSETZUNGSLAUF. ES WIRD GEPRUEFT,
          # OB DIESE DATEI NOCH AUF DEM TEMPORAEREN DATENKATALOG VORHANDEN
          # IST. FALLS NICHT, WIRD VERSUCHT, SIE ANSCHLIESSEND VOM ARCHIV-
          # SERVER ZU HOLEN
       if [[ "${actionin[$i]}" = fl ]]
       then
          printf "\n      $datentyp will be fetched from temporary directory \"${tmp_data_catalog}\" !"
          if [[ $files_for_pes = false ]]
          then
             if [[ -f "$tmp_data_catalog/${frelin[$i]}" ]]
             then
                ln  $tmp_data_catalog/${frelin[$i]}  ${localin[$i]}
                got_tmp[$i]=true
             elif [[ -f "$WORK/${frelin[$i]}"  &&  $ignore_archive_error = true ]]
             then
                printf "\n  +++ $datentyp not found in \"$tmp_data_catalog\" !"
                printf "\n  *** trying to use backup copy in \"$WORK\" "
                cp  $WORK/${frelin[$i]}  ${localin[$i]}
             else
                printf "\n  +++ $datentyp not found in \"$tmp_data_catalog\" "
                printf "\n      or \"$tmp_data_catalog\" does not exist!"
                printf "\n  *** trying to get copy from archive"
                actionin[$i]=ar
             fi
          else
             if [[ -d "$tmp_data_catalog/${frelin[$i]}" ]]
             then
                mkdir  ${localin[$i]}
                cd $tmp_data_catalog/${frelin[$i]}
                for file in $(ls *)
                do
                   ln $file $TEMPDIR/${localin[$i]}
                done
                cd $TEMPDIR
                got_tmp[$i]=true
             elif [[ -d "$WORK/${frelin[$i]}"  &&  $ignore_archive_error = true ]]
             then
                printf "\n  +++ $datentyp not found in \"$tmp_data_catalog\" !"
                printf "\n  *** trying to use backup copy in \"$WORK\" "
                cp -r  $WORK/${frelin[$i]}  ${localin[$i]}
             else
                printf "\n  +++ $datentyp not found in \"$tmp_data_catalog\" "
                printf "\n      or \"$tmp_data_catalog\" does not exist!"
                printf "\n  *** trying to get copy from archive"
                actionin[$i]=ar
             fi
          fi
       fi


          # DATEI LIEGT AUF ARCHIV-SERVER
       if [[ "${actionin[$i]}" = ar ]]
       then

          if [[ $files_for_pes = false ]]
          then
             printf "\n      file will be restored from archive-system ($archive_system)!"
          else
             printf "\n      directory will be restored from archive-system ($archive_system)!"
          fi

          file_restored=false

          if [[ $archive_system = asterix ]]
          then
             do_stagein=true
             (( stagein_anz = 0 ))
             while [[ $do_stagein = true ]]
             do
                if [[ $files_for_pes = false ]]
                then
                   stagein  -O  ${frelin[$i]}  >  STAGEIN_OUTPUT
                else
                   stagein  -t  -O  ${frelin[$i]}  >  STAGEIN_OUTPUT
                fi
                cat  STAGEIN_OUTPUT
                if [[ $(grep -c "st.msg:i24"  STAGEIN_OUTPUT) != 0 ]]
                then
                   file_restored=true
                   do_stagein=false
                else
                   (( stagein_anz = stagein_anz + 1 ))
                   if (( stagein_anz == 10 ))
                   then
                      printf "\n  +++ stagein stoped after 10 tries"
                      locat=stage
                      exit
                   fi
                   printf "\n  +++ restoring from archive failed, trying again:"
                   sleep 900
                fi
             done
          elif [[ $archive_system = DMF ]]
          then
             if [[ $files_for_pes = false ]]
             then
                printf "\n  +++ restoring of single files impossible with $archive_system !\n"
                locat=DMF
                exit
             else
                find  $ARCHIVE/${frelin[$i]}  -type m  -print  |  dmget
                cp  -r $ARCHIVE/${frelin[$i]}  $PWD
                file_restored=true
             fi
          elif [[ $archive_system = tivoli ]]
          then
             if [[ $files_for_pes = false ]]
             then
                if [[ $localhost = lcsgih ]]
                then
                   ssh  $usern@hicedata.hlrn.de  "cp  $PERM/${frelin[$i]}  $PWD"
                else
                   ssh  $usern@bicedata.hlrn.de  "cp  $PERM/${frelin[$i]}  $PWD"
                fi
             else
                (( inode = 0 ))
                while (( inode < nodes ))
                do
                   if [[ $localhost = lcsgih ]]
                   then
                      ssh  $usern@hicedata.hlrn.de  "cd $PWD; tar  xf  $PERM/${frelin[$i]}/${frelin[$i]}.node_$inode.tar"
                   else
                      ssh  $usern@bicedata.hlrn.de  "cd $PWD; tar  xf  $PERM/${frelin[$i]}/${frelin[$i]}.node_$inode.tar"
                   fi
                   (( inode = inode + 1 ))
                done
             fi
             file_restored=true
          elif [[ $archive_system = ut ]]
          then
             if [[ $files_for_pes = false ]]
             then
                cp  $UT/${frelin[$i]}  .
             else
                (( inode = 0 ))
                while (( inode < nodes ))
                do
                   tar  xf  $UT/${frelin[$i]}/${frelin[$i]}.node_$inode.tar
                   (( inode = inode + 1 ))
                done
             fi
             file_restored=true
          else
             printf "\n  +++ archive_system=\"$archive_system\"   restore impossible!"
             locat=rearchive
             exit
          fi

          if [[ $file_restored = true ]]
          then

                # DATEI AUCH AUF TEMPORAERES DATENVERZEICHNIS LEGEN, DAMIT
                # SIE BEI WEITEREN ZUGRIFFEN NOCH VORHANDEN IST
             [[ ! -d $tmp_data_catalog ]]  &&  mkdir -p  $tmp_data_catalog; chmod  g+rx  $tmp_data_catalog
             if [[ $files_for_pes = false ]]
             then
                ln  -f  ${frelin[$i]}  $tmp_data_catalog/${frelin[$i]}
             else
                mkdir  $tmp_data_catalog/${frelin[$i]}
                ln  -f  ${frelin[$i]}/*  $tmp_data_catalog/${frelin[$i]}
             fi
             got_tmp[$i]=true

                # DATEI UNTER LOKALEM NAMEN ZUR VERFUEGUNG STELLEN
             mv  ${frelin[$i]}  ${localin[$i]}

          fi
       fi


          # DATEI LIEGT IM VOM BENUTZER ANGEGEBENEN VERZEICHNIS
       if [[ "${actionin[$i]}" = ""  ||  "${actionin[$i]}" = "di"  ||  "${actionin[$i]}" = "npe" ]]
       then

          if [[ "${actionin[$i]}" = "npe"  &&  -n $numprocs ]]
          then

                # DATEI WIRD FUER DIE PROZESSOREN EINES PARALLERECHNERS BEREITGESTELLT
             printf "\n      file will be provided for $numprocs processors"
             mkdir  ${localin[$i]}
             ival=$numprocs
             (( ii = 0 ))
             while (( ii <= ival-1 ))
             do
                if (( ii < 10 ))
                then
                   cp  ${absnamein[$i]}  ${localin[$i]}/_000$ii
                elif (( ii < 100 ))
                then
                   cp  ${absnamein[$i]}  ${localin[$i]}/_00$ii
                elif (( ii < 1000 ))
                then
                   cp  ${absnamein[$i]}  ${localin[$i]}/_0$ii
                else
                   cp  ${absnamein[$i]}  ${localin[$i]}/_$ii
                fi
                (( ii = ii + 1 ))
             done

          else

             if [[ $files_for_pes = true ]]
             then

                   # DIE DEN PROZESSOREN EINES PARALLELRECHNERS ZUGEHOERIGEN
                   # DATEIEN WERDEN BEREITGESTELLT, INDEM ZUERST DER GESAMTE
                   # KATALOGINHALT KOPIERT UND DANN DIE EINZELNEN DATEIEN
                   # PER MOVE UMBENANNT WERDEN
                printf "\n      providing $numprocs files for the respective processors"
                mkdir  ${localin[$i]}
		if [[ $link_local_input = true ]]
		    then
		    printf "      using ln -f\n"
		    cd ${absnamein[$i]}
		    for file in $(ls *)
		      do
		      ln -f $file  ${localin[$i]}
		    done
		    cd $TEMPDIR
		fi
                # If "ln -f" fails of if "$link_local_input = false" do a normal "cp -r"
		if [[ ! -f "${localin[$i]}/_0000" ]]
		    then
		    if [[ $link_local_input = true ]]
			then
			printf "      ln failed for .../_0000, using cp...\n"
		    fi
		    cp -r  ${absnamein[$i]}/*  ${localin[$i]}
		fi

             else
                   # BEREITSTELLUNG AUF EINPROZESSORRECHNERN
		if [[ $link_local_input = true ]]
		then
		    printf "      using ln -f\n"
		    ln -f  ${absnamein[$i]}  ${localin[$i]}
		fi
		# If "ln -f" fails of if "$link_local_input = false" do a normal "cp"
		if [[ ! -f "${localin[$i]}" ]]
                then
		    if [[ $link_local_input = true ]]
	            then
			printf "      ln failed, using cp...\n"
		    fi
		    cp  ${absnamein[$i]}  ${localin[$i]}
                fi
             fi
          fi
       fi

    done
    if (( i != 0 ))
    then
       printf "\n$striche\n  *** all INPUT-files provided \n"
    fi


       # EVENTUELLE INPUT-KOMMANDOS ABARBEITEN
    (( i = 0 ))
    while (( i < iic ))
    do
       (( i = i + 1 ))
       if (( i == 1 ))
       then
          printf "\n\n  *** execution of INPUT-commands:\n$striche"
       fi
       printf "\n  >>> ${in_command[$i]}"
       eval  ${in_command[$i]}
       if (( i == iic ))
       then
          printf "\n$striche\n"
       fi
    done


       # VERBLEIBENDE CPU-ZEIT BERECHNEN
    cpurest=${cpumax}.


       # START DVR STREAMING SERVER
    if [[ $(echo $package_list | grep -c dvrp_graphics) != 0 ]]
    then
       if [[ "$dvr_server" != "" ]]
       then

          printf "\n\n  *** preparing the dvr streaming server configuration file"

             # Check, if a dvr server is already running
          running_dvrserver_id=`echo $(ps -edaf | grep .dvrserver.config | grep -v grep) | cut -d" " -f2`
          if [[ "$running_dvrserver_id" != "" ]]
          then

             printf "\n\n  +++ WARNING: A dvr server with id=$running_dvrserver_id is already running!"
             printf "\n      This server is used instead starting a new one!"
             printf "\n      If required, script \"process_dvr_output\" has to be run manually."

          else

                # COPY CONFIGURATION FILE FOR STREAMING SERVER FROM REPOSITORY TO HERE
             if [[ -f ${PALM_BIN}/.dvrserver.config ]]
             then
                cp  ${PALM_BIN}/.dvrserver.config  .

                   # Entering the BASEDIR, UID and GID into this file
                user_id=`id -u`
                group_id=`id -g`
                   # & is needed as seperator, because TEMPDIR contains /
                sed "s&<replace by dvr data directory>&${TEMPDIR}&g" .dvrserver.config > .dvrserver.1
                sed "s/<replace by user id>/$user_id/g"    .dvrserver.1 > .dvrserver.2
                sed "s/<replace by group id>/$group_id/g"  .dvrserver.2 > .dvrserver.3
                mv  .dvrserver.3  .dvrserver.config
                rm  .dvrserver.1  .dvrserver.2

                   # Start dvr server in background, get his id and print on terminal
                $dvr_server  .dvrserver.config  >>  DVR_LOGFILE  2>&1  &
                dvrserver_id=`echo $(ps -edaf | grep .dvrserver.config) | cut -d" " -f2`
                printf "\n  *** streaming server with id=$dvrserver_id is started in background"
                local_dvrserver_running=.TRUE.
             else
                printf "\n  +++ missing file \".dvrserver.config\" in directory:"
                printf "\n      \"$PALM_BIN\" "
                locat=dvr
                exit
             fi

          fi

       else
          printf "\n\n  --- INFORMATIVE: no dvr streaming server will be started"
       fi
    fi


       # NAMELIST-DATEI MIT WERTEN VON ENVIRONMENT-VARIABLEN ERZEUGEN (ZU
       # LESEN VON PALM)
    cat  >  ENVPAR  <<  %%END%%
 &envpar  run_identifier = '$fname', host = '$localhost',
          write_binary = '$write_binary', tasks_per_node = $tasks_per_node,
          maximum_cpu_time_allowed = ${cpumax}.,
          revision = '$global_revision',
          local_dvrserver_running = $local_dvrserver_running /

%%END%%


       # PROGRAMMSTART
    printf "\n\n  *** execution starts in directory\n      \"`pwd`\"\n$striche\n"
    PATH=$PATH:$TEMPDIR

       # MPI debug option (argument checking, slows down execution due to increased latency)
    if [[ "$mpi_debug" = true ]]
    then
       export MPI_CHECK_ARGS=1
       printf "\n  +++ MPI_CHECK_ARGS=$MPI_CHECK_ARGS"
    fi

    if [[ "$cond1" = debug  ||  "$cond2" = debug ]]
    then
       if [[ "$ENVIRONMENT" = BATCH ]]
       then
          if [[ $(echo $localhost | cut -c1-5) != lcsgi ]]
          then
             printf "\n  +++ debug is allowed in interactive mode only"
             locat=debug
             exit
          fi
       fi
       if [[ $localhost = decalpha ]]
       then
          dxladebug  a.out
       elif [[ $localhost = ibmh ]]
       then

             # SETUP THE IBM MPI ENVIRONMENT
          export MP_SHARED_MEMORY=yes
          export AIXTHREADS_SCOPE=S
          export OMP_NUM_THREADS=$threads_per_task
          export AUTHSTATE=files
          export XLFRTEOPTS="nlwidth=132:err_recovery=no"    # RECORD-LENGTH OF NAMELIST-OUTPUT

             # FOLLOWING OPTIONS ARE MANDATORY FOR TOTALVIEW
          export MP_ADAPTER_USE=shared
          export MP_CPU_USE=multiple
          export MP_TIMEOUT=1200

          unset  MP_TASK_AFFINITY

             # SO FAR, TOTALVIEW NEEDS HOSTFILE MECHANISM FOR EXECUTION
          #(( ii = 1 ))
          #while (( ii <= $numprocs ))
          #do
          #   echo  $localhost_realname  >>  hostfile
          #   (( ii = ii + 1 ))
          #done
          #export MP_HOSTFILE=hostfile

          if [[ "$LOADLBATCH" = yes ]]
          then
             totalview   poe  a.out  $ROPTS
          else
             echo totalview   poe  -a a.out  -procs $numprocs  -rmpool 0  -nodes 1   $ROPTS
             export TVDSVRLAUNCHCMD=ssh
             totalview   poe  -a a.out  -procs $numprocs  -rmpool 0  -nodes 1   $ROPTS
          fi
       elif [[ $(echo $localhost | cut -c1-5) = lcsgi ]]
       then
             # CURRENTLY NO DEBUGGER ON LCSGI
          if [[ $run_coupled_model = true ]]
          then
             printf "\n  +++ no debug in coupled mode available on \"$localhost\" "
             locat=debug
             exit
          else
             echo "no_coupling"  >  runfile_atmos
          fi
          (( ii = $numprocs / $threads_per_task ))
          export OMP_NUM_THREADS=$threads_per_task
          echo "OMP_NUM_THREADS=$OMP_NUM_THREADS"
          if [[ $threads_per_task != 1 ]]
          then
             printf "\n      threads per task: $threads_per_task"
          fi
          printf "\n\n"
          if [[ $( echo $mpilib | cut -c1-3 ) = mpt ]]
          then
#             export MPI_LAUNCH_TIMEOUT=360
             if [[ "$totalview" = true ]]
             then
                printf "\n     running totalview debugger"
                mpiexec_mpt -tv -n $ii   ./a.out  $ROPTS  < runfile_atmos
             else
                mpiexec_mpt -np $ii   ./a.out  $ROPTS  < runfile_atmos
             fi
          elif [[ $( echo $mpilib | cut -c1-3 ) = mva ]]
          then
#             ulimit -s 300000   # A too large stack size causes problems
#             export MV2_NUM_PORTS=2
#             export MV2_CPU_MAPPING=0:1:2:3
             if [[ "$totalview" = true ]]
             then
                printf "\n     running totalview debugger"
                mpiexec -tv ./a.out  $ROPTS  < runfile_atmos
             else
                mpiexec    ./a.out  $ROPTS  < runfile_atmos
             fi
          fi
       else 
          printf "\n  +++ no debug available on \"$localhost\" "
          printf "\n      or not implemented in mrun so far"
          locat=debug
          exit
       fi

       # end debug mode
    else

          # normal execution
       if [[ -n $numprocs ]]
       then
             # RUNNING THE PROGRAM ON PARALLEL MACHINES
          if [[ $(echo $host | cut -c1-3) = ibm ]]
          then
                # SETUP THE IBM MPI ENVIRONMENT
             if [[ $host != ibmh ]]
             then
                export MP_SHARED_MEMORY=yes
                export AIXTHREAD_SCOPE=S
                export OMP_NUM_THREADS=$threads_per_task
                export XLSMPOPTS="spins=0:yields=0:stack=20000000"
                export AUTHSTATE=files
                export XLFRTEOPTS="nlwidth=132:err_recovery=no"    # RECORD-LENGTH OF NAMELIST-OUTPUT
                #  export MP_PRINTENV=yes

                   # TUNING-VARIABLEN ZUR VERBESSERUNG DER KOMMUNIKATION
                   # ZEIGEN ABER DERZEIT (SEP 04, FEDERATION) KAUM WIRKUNG
                export MP_WAIT_MODE=poll
                [[ $node_usage = not_shared ]]  &&  export MP_SINGLE_THREAD=yes
             fi
             if [[ "$LOADLBATCH" = yes ]]
             then
                printf "\n--- Control: OMP_NUM_THREADS = \"$OMP_NUM_THREADS\" \n"
                if [[ "$cond1" = hpmcount  ||  "$cond2" = hpmcount ]]
                then
                   /opt/optibm/HPM_2_4_1/bin/hpmcount  a.out  $ROPTS
                else
                   if [[ $run_coupled_model = false ]]
                   then
                      if [[ "$ocean_file_appendix" = true ]]
                      then
                         echo "precursor_ocean"  >  runfile_atmos
                      else
                         echo "precursor_atmos"  >  runfile_atmos
                      fi
                   else
                      (( iia = $numprocs_atmos / $threads_per_task ))
                      (( iio = $numprocs_ocean / $threads_per_task ))
                      printf "\n      coupled run ($iia atmosphere, $iio ocean)"
                      printf "\n      using $coupled_mode coupling"
                      printf "\n\n"
                      echo "coupled_run $iia $iio"  >  runfile_atmos
                   fi
                   poe ./a.out  $ROPTS  <  runfile_atmos
                fi
             else
                if [[ $localhost = ibmh  ||  $localhost = ibms ]]
                then
                   poe  a.out  -procs $numprocs  -nodes 1  -rmpool 0  $ROPTS
                elif [[ $localhost = ibmku  ||  $localhost = ibmy ]]
                then
                   if [[ -f $hostfile ]]
                   then
                      cp  $hostfile  hostfile
                   else
                      (( ii = 1 ))
                      while (( ii <= $numprocs ))
                      do
                         echo  $localhost_realname  >>  hostfile
                         (( ii = ii + 1 ))
                      done
                   fi
                   export MP_HOSTFILE=hostfile
                   if [[ $run_coupled_model = false ]]
                   then
                      if [[ "$ocean_file_appendix" = true ]]
                      then
                         echo "precursor_ocean"  >  runfile_atmos
                      else
                         echo "precursor_atmos"  >  runfile_atmos
                      fi
                   else
                      (( iia = $numprocs_atmos / $threads_per_task ))
                      (( iio = $numprocs_ocean / $threads_per_task ))
                      printf "\n      coupled run ($iia atmosphere, $iio ocean)"
                      printf "\n      using $coupled_mode coupling"
                      printf "\n\n"
                      echo "coupled_run $iia $iio"  >  runfile_atmos
                   fi
                   if [[ $localhost = ibmy ]]
                   then
                      ./a.out  -procs $tasks_per_node  $ROPTS  <  runfile_atmos
                   else
                      poe  ./a.out  -procs $numprocs $ROPTS  <  runfile_atmos 
                   fi

                else
                   if [[ "$host_file" = "" ]]
                   then
                      printf "\n  +++ no hostfile given in configuration file"
                      locat=config_file
                      exit
                   else
                      eval host_file=$host_file
                   fi
                   export MP_HOSTFILE=$host_file
                   poe  a.out  -procs $numprocs  -tasks_per_node $numprocs  $ROPTS
                fi
             fi
          elif [[ $host = nech  ||  $host = necriam ]]
          then
             (( ii = nodes ))
             if [[ $ii = 1 ]]
             then
                export F_ERRCNT=0        # acceptable number of errors before program is stopped
                export MPIPROGINF=YES
                #  export F_TRACE=YES|FMT1|FMT2  # output of ftrace informations to job protocol
                echo "*** execution on single node with mpirun"
                mpirun  -np $numprocs  ./a.out  $ROPTS
             else
                (( i = 0 ))
                while (( i < ii ))
                do
                   echo "-h $i  -p $tasks_per_node  -e ./mpi_exec_shell"  >>  multinode_config
                   (( i = i + 1 ))
                done

                echo "#!/bin/sh"                         >   mpi_exec_shell
                echo " "                                 >>  mpi_exec_shell
                echo "set -u"                            >>  mpi_exec_shell
                echo "F_ERRCNT=0"                        >>  mpi_exec_shell
                echo "MPIPROGINV=YES"                    >>  mpi_exec_shell
                echo "OMP_NUM_THREADS=$threads_per_task" >>  mpi_exec_shell 
                echo "cpurest=$cpurest"                  >>  mpi_exec_shell
                echo "fname=$fname"                      >>  mpi_exec_shell
                echo "localhost=$localhost"              >>  mpi_exec_shell
                echo "return_addres=$return_addres"      >>  mpi_exec_shell
                echo "return_username=$return_username"  >>  mpi_exec_shell
                echo "tasks_per_node=$tasks_per_node"    >>  mpi_exec_shell
                echo "write_binary=$write_binary"        >>  mpi_exec_shell
                echo "use_seperate_pe_for_dvrp_output=$use_seperate_pe_for_dvrp_output"  >>  mpi_exec_shell
                echo "  "                                >>  mpi_exec_shell
                echo "export F_ERRCNT"                   >>  mpi_exec_shell
                echo "export MPIPROGINV"                 >>  mpi_exec_shell
                echo "export OMP_NUM_THREADS"            >>  mpi_exec_shell
                echo "export cpurest"                    >>  mpi_exec_shell
                echo "export fname"                      >>  mpi_exec_shell
                echo "export localhost"                  >>  mpi_exec_shell
                echo "export return_addres"              >>  mpi_exec_shell
                echo "export return_username"            >>  mpi_exec_shell
                echo "export tasks_per_node"             >>  mpi_exec_shell
                echo "export write_binary"               >>  mpi_exec_shell
                echo "export use_seperate_pe_for_dvrp_output"  >>  mpi_exec_shell
                echo " "                                 >>  mpi_exec_shell
                echo "exec  ./a.out"                     >>  mpi_exec_shell

                chmod u+x  mpi_exec_shell
                export MPIPROGINF=YES
                mpirun  -f multinode_config  &
                wait

             fi
          elif [[ $(echo $host | cut -c1-2) = lc  &&  $host != lckyoto &&  $host != lctit ]]
          then

                # COPY HOSTFILE FROM SOURCE DIRECTORY OR CREATE IT, IF IT
                # DOES NOT EXIST
             if [[ $host != lcsgih  &&  $host != lcsgib ]]
             then
                if [[ -f $hostfile ]]
                then
                   cp  $hostfile  hostfile
                else
                   (( ii = 1 ))
                   while (( ii <= $numprocs / $threads_per_task ))
                   do
                      echo  $localhost_realname  >>  hostfile
                      (( ii = ii + 1 ))
                   done
                fi
                eval zeile=\"`head -n $ii  hostfile`\"
                printf "\n  *** running on: $zeile"
             fi

             (( ii = $numprocs / $threads_per_task ))
             export OMP_NUM_THREADS=$threads_per_task
#             echo "OMP_NUM_THREADS=$OMP_NUM_THREADS"
             if [[ $threads_per_task != 1 ]]
             then
                   # increase stack size to unlimited, because large runs
                   # may abort otherwise
                ulimit -Ss unlimited
                printf "\n      threads per task: $threads_per_task  stacksize: unlimited"
             fi
             if [[ $run_coupled_model = false ]]
             then
                if [[ "$ocean_file_appendix" = true ]]
                then
                   echo "precursor_ocean"  >  runfile_atmos
                else
                   echo "precursor_atmos"  >  runfile_atmos
                fi
                printf "\n\n"
                if [[ $host = lcsgih  ||  $host = lcsgib ]]
                then
                   if [[ $( echo $mpilib | cut -c1-3 ) = mpt ]]
                   then
                          # MPI_DSM_DISTRIBUTE not necessary when MPI_DSM_CPULIST is set
                          # export MPI_DSM_DISTRIBUTE=1
                          # MPI_DSM_CPULIST: pin MPI processes to cores
                      if [[ $use_openmp = false ]]
                      then
                         if [[ "$sgi_feature" = ice2 ]]
                         then
                            export MPI_DSM_CPULIST="0,4,1,5,2,6,3,7:allhosts"
                         else
                            export MPI_DSM_CPULIST="0,1,4,5,2,3,6,7:allhosts"
                         fi
                      else
                         unset MPI_DSM_CPULIST
                      fi
                          # MPI_IB_RAILS: use both IB rails on ICE2
                      export MPI_BUFS_PER_HOST=512
                      export MPI_IB_RAILS=2
                          # NECESSARY, IF MORE THAN 4096 PEs ARE USED
                      export MPI_CONNECTIONS_THRESHOLD=8192
                      echo "*** MPI_DSM_CPULIST=$MPI_DSM_CPULIST"
                      export MPI_TYPE_DEPTH=20
                      echo "*** MPI_TYPE_DEPTH=$MPI_TYPE_DEPTH"
                      mpiexec_mpt -np $ii   ./a.out  $ROPTS  < runfile_atmos

                          # next is test for openmp usage
                  #     echo "mpiexec -npernode $tasks_per_node  ./a.out  $ROPTS  < runfile_atmos"
                  #     mpiexec -npernode $tasks_per_node  ./a.out  $ROPTS  < runfile_atmos
                   elif [[ $( echo $mpilib | cut -c1-3 ) = mva ]]
                   then
                      export MV2_NUM_PORTS=2
                      #  The default setting of MV2_CPU_MAPPING gives best results
                      # export MV2_ENABLE_AFFINITY=1
                      #  export MV2_CPU_MAPPING=0,1,4,5,2,3,6,7
               #       if [[ "$sgi_feature" = ice2 ]]
               #       then
               #          export MV2_CPU_MAPPING=0,4,1,5,2,6,3,7
               #       else
               #          export MV2_CPU_MAPPING=0,1,4,5,2,3,6,7
               #       fi
                      [[ $use_openmp = true ]]  &&  unset MV2_CPU_MAPPING
                      echo "*** MV2_CPU_MAPPING=$MV2_CPU_MAPPING"
                      if [[ $use_openmp = true ]]
                      then
                         mpiexec -npernode $tasks_per_node  ./a.out  $ROPTS  <  runfile_atmos
                      else
                         mpiexec -np $ii  ./a.out  $ROPTS  < runfile_atmos
                      fi
                   fi
                elif [[ $host = lcxt4  ||  $host = lcxt5m ]]
                then
                    aprun  -n $ii  -N $tasks_per_node  a.out  $ROPTS  < runfile_atmos
                else
                   mpiexec  -machinefile hostfile  -n $ii  a.out  < runfile_atmos  $ROPTS
                fi
             else

                    # currently there is no full MPI-2 support on ICE and XT4
                (( iia = $numprocs_atmos / $threads_per_task ))
                (( iio = $numprocs_ocean / $threads_per_task ))
                printf "\n      coupled run ($iia atmosphere, $iio ocean)"
                printf "\n      using $coupled_mode coupling"
                printf "\n\n"

                if [[ $coupled_mode = "mpi2" ]]
                then
                   echo "atmosphere_to_ocean $iia $iio"  >  runfile_atmos
                   echo "ocean_to_atmosphere $iia $iio"  >  runfile_ocean
                   if [[ $host = lcsgih  ||  $host = lcsgib ]]
                   then

                      if [[ $( echo $mpilib | cut -c1-3 ) = mpt ]]
                      then
#                         export MPI_LAUNCH_TIMEOUT=360
                         mpiexec_mpt -np $iia  ./a.out  $ROPTS < runfile_atmos &
                         mpiexec_mpt -np $iio  ./a.out  $ROPTS < runfile_ocean &
                      elif [[ $( echo $mpilib | cut -c1-3 ) = mva ]]
                      then
#                         ulimit -s 300000   # A too large stack size causes problems
#                         export MV2_NUM_PORTS=2
#                         export MV2_CPU_MAPPING=0:1:2:3
                         mpiexec -n $iia  ./a.out  $ROPTS < runfile_atmos &
                         mpiexec -n $iio  ./a.out  $ROPTS < runfile_ocean &
                      fi

                   elif [[ $host = lcxt4  ||  $host = lcxt5m ]]
                   then

                      aprun  -n $iia  -N $tasks_per_node  a.out < runfile_atmos  $ROPTS  &
                      aprun  -n $iio  -N $tasks_per_node  a.out < runfile_ocean  $ROPTS  &

                   else
                          # WORKAROUND BECAUSE mpiexec WITH -env option IS NOT AVAILABLE ON SOME SYSTEMS
                       mpiexec  -machinefile hostfile  -n $iia  a.out  $ROPTS  <  runfile_atmos &
                       mpiexec  -machinefile hostfile  -n $iio  a.out  $ROPTS  <  runfile_ocean &
#                       mpiexec  -machinefile hostfile  -n $iia  -env coupling_mode atmosphere_to_ocean  a.out  $ROPTS  &
#                       mpiexec  -machinefile hostfile  -n $iio  -env coupling_mode ocean_to_atmosphere  a.out  $ROPTS  &
                   fi
                   wait

                else

                   echo "coupled_run $iia $iio"  >  runfile_atmos
                   if [[ $host = lcsgih  ||  $host = lcsgib ]]
                   then

                      if [[ $( echo $mpilib | cut -c1-3 ) = mpt ]]
                      then
#                         export MPI_LAUNCH_TIMEOUT=360
                         mpiexec_mpt -np $ii  ./a.out  $ROPTS < runfile_atmos
                      elif [[ $( echo $mpilib | cut -c1-3 ) = mva ]]
                      then
#                         ulimit -s 300000   # A too large stack size causes problems
#                         export MV2_NUM_PORTS=2
#                         export MV2_CPU_MAPPING=0:1:2:3
                         mpiexec  ./a.out  $ROPTS < runfile_atmos
                      fi

                   elif [[ $host = lcxt4  ||  $host = lcxt5m ]]
                   then

                      aprun  -n $ii  -N $tasks_per_node  a.out < runfile_atmos  $ROPTS

                   elif [[ $host = lck ]]
                   then
                         mpiexec -n $ii  ./a.out  $ROPTS < runfile_atmos &
                   fi
                   wait
                fi

             fi
          elif [[ $host = decalpha ]]
          then
             dmpirun  -np $numprocs  a.out  $ROPTS
          elif [[ $host = lckyoto ]]
          then
             set -xv
             export P4_RSHCOMMAND=plesh
             echo "     P4_RSHCOMMAND = $P4_RSHCOMMAND"
             if [[ "$ENVIRONMENT" = BATCH ]]
             then
                if [[ "$cond2" = fujitsu ]]
                then
                   mpiexec  -n $numprocs  ./a.out  $ROPTS  # for fujitsu-compiler
                elif [[ "cond2" = pgi ]]
                then
                   mpirun  -np $numprocs  -machinefile ${QSUB_NODEINF}  ./a.out  $ROPTS
                else
                   mpirun_rsh -np $numprocs -hostfile ${QSUB_NODEINF} MV2_USE_SRQ=0 ./a.out ${ROPTS} || /bin/true
                fi
             else
                if [[ "$cond2" = "" ]]
                then
                   mpiruni_rsh -np $numprocs ./a.out  $ROPTS  # for intel
                else
                   mpirun  -np $numprocs  ./a.out  $ROPTS
                fi
             fi
             set +xv
          elif [[ $host = lctit ]]
          then
             mpirun  -np $numprocs  -hostfile $PBS_NODEFILE ./a.out  $ROPTS
          else
             mpprun  -n $numprocs  a.out  $ROPTS
          fi
          [[ $? != 0 ]]  &&  execution_error=true


             # PERFORMANCE-AUSWERTUNG MIT APPRENTICE
          if [[ "$cond1" = apprentice  ||  "$cond2" = apprentice ]]
          then
             apprentice
          fi
       else
          a.out  $ROPTS
       fi
    fi
    if [[ $? != 0  ||  $execution_error = true ]]
    then

          # ABBRUCH BEI LAUFZEITFEHLER
#       [[ ! ( "$cond1" = debug  ||  "$cond2" = debug ) ]]  &&  cat  aout_output*
       printf "\n  +++ runtime error occured"
       locat=execution
       exit
    else
#       [[ ! ( "$cond1" = debug  ||  "$cond2" = debug ) ]]  &&  cat  aout_output*
       printf "\n$striche\n  *** execution finished \n"

          # Stop the dvr streaming server and process the dvr output in order
          # to create dvrs- and html-files containing all streams
       if [[ "$dvrserver_id" != "" ]]
       then
          kill $dvrserver_id
          printf "\n  *** dvr server with id=$dvrserver_id has been stopped"

             # If there is a directory, data have been output by the
             # streaming server. Otherwise, user has chosen dvrp_output=local
          if [[ -d DATA_DVR ]]
          then

                # Add the current dvr configuration file to the dvr output
                # directory
             cp  .dvrserver.config  DATA_DVR

                # Process the dvr output (option -s for also generating
                # sequence mode data)
             process_dvr_output  -d DATA_DVR  -f $fname  -s

          else

                # Process the local output
             process_dvr_output  -l  -d DATA_DVR  -f $fname

          fi

       elif [[ $(echo $package_list | grep -c dvrp_graphics) != 0 ]]
       then

             # Process dvr output generated in local mode (dvrp_output=local)
          process_dvr_output  -l  -d DATA_DVR  -f $fname

       fi
    fi



       # Call of combine_plot_fields in order to merge single files written
       # by each PE into one file.
    if [[ ! -f ${PALM_BIN}/combine_plot_fields${block}.x ]]
    then
       printf "\n\n\n  +++ WARNING: no combine_plot_fields found for given block \"$cond1 $cond2\""
       printf "\n      2d- and/or 3d-data may be incomplete!"
       printf "\n      Run \"mbuild -u -h $localhost\" to generate utilities for this block.\n"
    else
       printf "\n\n\n *** post-processing: now executing \"combine_plot_fields${block}.x\" ..."
       combine_plot_fields${block}.x
    fi



       # EVENTUELLE OUTPUT-KOMMANDOS ABARBEITEN
    (( i = 0 ))
    while (( i < ioc ))
    do
       (( i = i + 1 ))
       if (( i == 1 ))
       then
          printf "\n\n  *** execution of OUTPUT-commands:\n$striche"
       fi
       printf "\n  >>> ${out_command[$i]}"
       eval  ${out_command[$i]}
       if (( i == ioc ))
       then
          printf "\n$striche\n"
       fi
    done


       # EVTL. INHALT DES AKTUELLEN VERZEICHNISSES AUSGEBEN
    if [[ $do_trace = true ]]
    then
       printf "\n\n"
       ls -al
    fi



       # OUTPUT-DATEIEN AN IHRE ZIELORTE KOPIEREN
    (( i = 0 ))
    while (( i < iout ))
    do
       (( i = i + 1 ))
       if (( i == 1 ))
       then
          printf "\n\n  *** saving OUTPUT-files:\n$striche"
       fi

          # PRUEFEN, OB EINZELDATEI ODER DATEI PRO PROZESSOR
       files_for_pes=false; filetyp=file
       if [[ "${actionout[$i]}" = pe  &&  -n $numprocs ]]
       then
          files_for_pes=true; filetyp=directory
          actionout[$i]=""
       elif [[ "${actionout[$i]}" = pe  &&  ! -n $numprocs ]]
       then
          actionout[$i]=""
       elif [[ "${actionout[$i]}" = arpe  &&  -n $numprocs ]]
       then
          files_for_pes=true; filetyp=directory
          actionout[$i]="ar"
       elif [[ "${actionout[$i]}" = arpe  &&  ! -n $numprocs ]]
       then
          actionout[$i]="ar"
       elif [[ "${actionout[$i]}" = flpe  &&  -n $numprocs ]]
       then
          files_for_pes=true; filetyp=directory
          actionout[$i]="fl"
       elif [[ "${actionout[$i]}" = flpe  &&  ! -n $numprocs ]]
       then
          actionout[$i]="fl"
       elif [[ "${actionout[$i]}" = trpe  &&  -n $numprocs ]]
       then
          files_for_pes=true; filetyp=directory
          actionout[$i]="tr"
       elif [[ "${actionout[$i]}" = trpe  &&  ! -n $numprocs ]]
       then
          actionout[$i]="tr"
       fi

       if [[ ! -f ${localout[$i]}  &&  $files_for_pes = false ]]
       then
          printf "\n  +++ temporary OUTPUT-file  ${localout[$i]}  does not exist\n"
       elif [[ ! -d ${localout[$i]}  &&  $files_for_pes = true ]]
       then
          printf "\n  +++ temporary OUTPUT-file  ${localout[$i]}/....  does not exist\n"
       else


             # KOPIEREN PER FTP/SCP (IMMER IM BINAERMODUS, -M: FALLS ZIELKATALOG
             # NICHT VORHANDEN, WIRD VERSUCHT, IHN ANZULEGEN), ABER NUR BEI
             # REMOTE-RECHNUNGEN
          if [[ "${actionout[$i]}" = tr ]]
          then
             if [[ $localhost != $fromhost ]]
             then
                if [[ $files_for_pes = false ]]
                then
                   cps=""
                   cst=""
                else
                   cps=-c
                   cst="/"
                fi
                if [[ $localhost = nech ]]
                then

                      # TRANSFER IN EIGENSTAENDIGEM JOB
                      # ZUERST KOPIE DER DATEI INS TEMPORAERE DATENVERZEICHNIS
                   [[ ! -d $tmp_data_catalog/TRANSFER ]]  &&  mkdir -p  $tmp_data_catalog/TRANSFER
                   file_to_transfer=${fname}_${localout[$i]}_to_transfer_$kennung
                   if [[ $files_for_pes = false ]]
                   then
                      ln -f  ${localout[$i]}  $tmp_data_catalog/TRANSFER/$file_to_transfer
                   else
                      mkdir  $tmp_data_catalog/TRANSFER/$file_to_transfer
                      ln  ${localout[$i]}/*  $tmp_data_catalog/TRANSFER/$file_to_transfer
                   fi

                   echo "set -x"                                    >    transfer_${localout[$i]}
                   echo "cd  $tmp_data_catalog/TRANSFER"            >>   transfer_${localout[$i]}

                   printf "\n  >>> OUTPUT: ${localout[$i]}$cst  by SCP in seperate job to"
                   printf "\n              ${pathout[$i]}/${localhost}_${fname}${endout[$i]}$cst"
                   printf "\n              or higher cycle\n"
                   echo "batch_scp $cps -b -m -u $return_username $return_addres  $file_to_transfer \"${pathout[$i]}\" ${localhost}_${fname}${endout[$i]}  ${extout[$i]}"  >>  transfer_${localout[$i]}

                   echo "[[ \$? = 0 ]]  &&  rm  $file_to_transfer"  >>  transfer_${localout[$i]}

                   if [[ $localhost = nech ]]
                   then
                      subjob  -d  -c /pf/b/$usern/job_queue  -v  -q pp  -X 0  -m 1000  -t 900  transfer_${localout[$i]}
                   else
                      if [[ "$LOGNAME" = b323013 ]]
                      then
                         subjob  -v  -q c1  -X 0  -m 1000  -t 900  -c $job_catalog  transfer_${localout[$i]}
                      else
                         subjob  -d  -v  -q c1  -X 0  -m 1000  -t 900  -c $job_catalog  transfer_${localout[$i]}
                      fi
                   fi

                else

                      # TRANSFER INNERHALB DIESES JOBS
                   transfer_failed=false
                   printf "\n  >>> OUTPUT: ${localout[$i]}$cst  by SCP to"
                   printf "\n              ${pathout[$i]}/${localhost}_${fname}${endout[$i]}$cst\n"
                   batch_scp $cps -b -m -u $return_username $return_addres  ${localout[$i]} "${pathout[$i]}" ${localhost}_${fname}${endout[$i]}  ${extout[$i]}
                   [[ $? != 0 ]]  &&  transfer_failed=true

                      # BEI FEHLGESCHLAGENEM TRANSFER SICHERUNGSKOPIE AUF
                      # LOKALER MASCHINE ANLEGEN
                   if [[ $transfer_failed = true ]]
                   then
                      printf "  +++ transfer failed. Trying to save a copy on the local host under:\n"
                      printf "      ${pathout[$i]}/${localhost}_${fname}${endout[$i]}_$kennung\n"

                         # ERSTMAL PRUEFEN, OB VERZEICHNIS EXISTIERT. GEGEBENENFALLS
                         # ANLEGEN.
                      eval  local_catalog=${pathout[$i]}
                      if [[ ! -d $local_catalog ]]
                      then
                         printf "  *** local directory does not exist. Trying to create:\n"
                         printf "      $local_catalog \n"
                         mkdir -p  $local_catalog
                      fi
                      eval  cp  ${localout[$i]}  ${pathout[$i]}/${localhost}_${fname}${endout[$i]}_$kennung
                      transfer_problems=true
                   fi
                fi
             else

                   # WERTZUWEISUNG, SO DASS WEITER UNTEN NUR KOPIERT WIRD
                actionout[$i]=""
             fi
          fi


             # APPEND PER FTP/SCP (IMMER IM BINAERMODUS, -M: FALLS ZIELKATALOG
             # NICHT VORHANDEN, WIRD VERSUCHT, IHN ANZULEGEN), ABER NUR BEI
             # REMOTE-RECHNUNGEN
          if [[ "${actionout[$i]}" = tra ]]
          then
             if [[ $localhost != $fromhost ]]
             then
                if [[ $localhost = ibmh  ||  $localhost = nech ]]
                then

                      # TRANSFER IN EIGENSTAENDIGEM JOB
                      # ZUERST KOPIE DER DATEI INS TEMPORAERE DATENVERZEICHNIS
                   [[ ! -d $tmp_data_catalog/TRANSFER ]]  &&  mkdir -p  $tmp_data_catalog/TRANSFER
                   file_to_transfer=${fname}_${localout[$i]}_to_transfer_$kennung
                   ln -f  ${localout[$i]}  $tmp_data_catalog/TRANSFER/$file_to_transfer

                   echo "set -x"                                    >    transfer_${localout[$i]}
                   echo "cd  $tmp_data_catalog/TRANSFER"            >>   transfer_${localout[$i]}

                   printf "\n  >>> OUTPUT: ${localout[$i]}  append by SCP in seperate job to"
                   printf "\n              ${pathout[$i]}/${localhost}_${fname}${endout[$i]}"
                   printf "\n              or higher cycle\n"
                   echo "batch_scp -A -b -m -u $return_username $return_addres  $file_to_transfer \"${pathout[$i]}\" ${localhost}_${fname}${endout[$i]}  ${extout[$i]}"  >>  transfer_${localout[$i]}

                   echo "[[ \$? = 0 ]]  &&  rm  $file_to_transfer"  >>  transfer_${localout[$i]}

                   if [[ $localhost = nech ]]
                   then
                      subjob  -d  -c /pf/b/$usern/job_queue  -v  -q pp  -X 0  -m 1000  -t 900  transfer_${localout[$i]}
                   else
                      if [[ $LOGNAME = b323013 ]]
                      then
                         subjob  -v  -q c1  -X 0  -m 1000  -t 900  -c $job_catalog  transfer_${localout[$i]}
                      else
                         subjob  -d  -v  -q c1  -X 0  -m 1000  -t 900  -c $job_catalog  transfer_${localout[$i]}
                      fi
                   fi

                else

                      # TRANSFER INNERHALB DIESES JOBS
                   transfer_failed=false
                   printf "\n  >>> OUTPUT: ${localout[$i]}  append by SCP to"
                   printf "\n              ${pathout[$i]}/${localhost}_${fname}${endout[$i]}\n"
                   batch_scp -A -b -m -u $return_username  $return_addres ${localout[$i]} "${pathout[$i]}" ${localhost}_${fname}${endout[$i]}  ${extout[$i]}
                   [[ $? != 0 ]]  &&  transfer_failed=true

                      # BEI FEHLGESCHLAGENEM TRANSFER SICHERUNGSKOPIE AUF
                      # LOKALER MASCHINE ANLEGEN
                   if [[ $transfer_failed = true ]]
                   then
                      printf "  +++ transfer failed. Trying to save a copy on the local host under:\n"
                      printf "      ${pathout[$i]}/${localhost}_${fname}${endout[$i]}_$kennung\n"

                         # ERSTMAL PRUEFEN, OB VERZEICHNIS EXISTIERT. GEGEBENENFALLS
                         # ANLEGEN
                      eval  local_catalog=${pathout[$i]}
                      if [[ ! -d $local_catalog ]]
                      then
                         printf "  *** local directory does not exist. Trying to create:\n"
                         printf "      $local_catalog \n"
                         mkdir -p  $local_catalog
                      fi

                      eval  cp  ${localout[$i]}  ${pathout[$i]}/${localhost}_${fname}${endout[$i]}_$kennung
                      transfer_problems=true
                   fi
                fi
             else

                   # WERTZUWEISUNG, SO DASS WEITER UNTEN NUR APPEND AUF
                   # LOKALER MASCHINE DURCHGEFUEHRT WIRD
                actionout[$i]=a
             fi
          fi


             # OUTPUT-DATEI FUER EINEN FORTSETZUNGSLAUF. DATEI WIRD PER
             # LINK AUF DEN TEMPORAEREN DATENKATALOG GELEGT. OPTION -f WIRD
             # VERWENDET, FALLS DORT NOCH EINE DATEI GLEICHEN NAMENS VORHANDEN
             # SEIN SOLLTE. ANSCHLIESSEND WIRD SEINE ARCHIVIERUNG ANGESTOSSEN
          if [[ "${actionout[$i]}" = fl ]]
          then
             [[ ! -d $tmp_data_catalog ]]  &&  mkdir -p  $tmp_data_catalog
             chmod  g+rx  $tmp_data_catalog
             if [[ $files_for_pes = false ]]
             then
                printf "\n  >>> OUTPUT: ${localout[$i]}  to"
                printf "\n              $tmp_data_catalog/${frelout[$i]} (temporary data catalog)\n"
                ln -f  ${localout[$i]}  $tmp_data_catalog/${frelout[$i]}
             else
                printf "\n  >>> OUTPUT: ${localout[$i]}/....  to"
                printf "\n              $tmp_data_catalog/${frelout[$i]} (temporary data catalog)\n"
                mkdir  $tmp_data_catalog/${frelout[$i]}
                cd ${localout[$i]}
                for file in $(ls *)
                do
                   ln -f $file $tmp_data_catalog/${frelout[$i]}
                done
                cd $TEMPDIR
             fi


                # ARCHIVIERUNGSJOB WIRD ERZEUGT UND ABGESCHICKT
             if [[ $store_on_archive_system = true ]]
             then

                if [[ $archive_system = asterix ]]
                then
                   echo "cd  $tmp_data_catalog"                      >> archive_${frelout[$i]}
                   if [[ $files_for_pes = false ]]
                   then
                      echo "stageout  ${frelout[$i]}  > STAGE_OUTPUT${i}_$kennung" >> archive_${frelout[$i]}
                   else
                      echo "stageout -t  ${frelout[$i]}  > STAGE_OUTPUT${i}_$kennung" >> archive_${frelout[$i]}
                   fi
                   echo "cat  STAGE_OUTPUT${i}_$kennung"               >> archive_${frelout[$i]}
                   echo "if [[ \$(grep -c \"st.msg:150\"  STAGE_OUTPUT${i}_$kennung) != 0 ]]" >> archive_${frelout[$i]}
                   echo "then"                                       >> archive_${frelout[$i]}
                   echo "   do_stageout=false"                       >> archive_${frelout[$i]}
                   echo "else"                                       >> archive_${frelout[$i]}
                   echo "   echo \"  +++ $filetyp ${frelout[$i]}  could not be stored on archive-system\" " >> archive_${frelout[$i]}
                   echo "   cat  /dev/null  >  ~/job_queue/ARCHIVE_ERROR_$fname" >> archive_${frelout[$i]}
                   echo "   cat  STAGE_OUTPUT${i}_$kennung  >  ~/job_queue/archive_${frelout[$i]}_error" >> archive_${frelout[$i]}
                   echo "   echo \"  *** $filetyp ${frelout[$i]} will be copied to \$WORK as backup\" " >> archive_${frelout[$i]}
                   if [[ $files_for_pes = false ]]
                   then
                      echo "   cp   ${frelout[$i]}  \$WORK"                    >> archive_${frelout[$i]}
                   else
                      echo "   cp -r  ${frelout[$i]}  \$WORK/${frelout[$i]}"   >> archive_${frelout[$i]}
                   fi
                   echo "   echo \"  *** $filetyp ${frelout[$i]} saved\" " >> archive_${frelout[$i]}
                   echo "fi"                                         >> archive_${frelout[$i]}
                   echo "rm  STAGE_OUTPUT${i}_$kennung"              >> archive_${frelout[$i]}
                elif [[ $archive_system = DMF ]]
                then
                   echo "cd  $tmp_data_catalog"                      >> archive_${frelout[$i]}
                   if [[ $files_for_pes = false ]]
                   then
                      printf "\n  +++ archiving of single files impossible with $archive_system !\n"
                      locat=DMF
                      exit
                   else
                         # FUER RECHNER IN JUELICH. DORT KOENNTEN AUCH
                         # EINZELNE DATEIEN GESICHERT WERDEN (SPAETER KORR.)
                      echo "rm -rf  \$ARCHIVE/${frelout[$i]}"     >> archive_${frelout[$i]}
                      echo "cp -r  ${frelout[$i]}  \$ARCHIVE"     >> archive_${frelout[$i]}
                   fi
                elif [[ $archive_system = tivoli ]]
                then
                   echo "cd  $tmp_data_catalog"                       >> archive_${frelout[$i]}
                   if [[ $files_for_pes = false ]]
                   then
                         # EVENTUELL NOCH VORHANDENE DATEI IM ARCHIV LOSCHEN
                      echo "set -x"                                   >> archive_${frelout[$i]}
                      echo "rm  -rf  \$PERM/${frelout[$i]}"           >> archive_${frelout[$i]}
                      echo "cp  ${frelout[$i]} \$PERM/${frelout[$i]}" >> archive_${frelout[$i]}
                   else

                      echo "set -x"                                   >> archive_${frelout[$i]}
                      echo "rm  -rf  \$PERM/${frelout[$i]}/*"         >> archive_${frelout[$i]}
                      echo "[[ ! -d \$PERM/${frelout[$i]} ]] && mkdir $PERM/${frelout[$i]}" >> archive_${frelout[$i]}
                      cd  $tmp_data_catalog
                      all_files=`ls -1 ${frelout[$i]}/*`
                      cd -  > /dev/null
                      (( inode = 0 ))
                      (( tp1   = tasks_per_node + 1 ))
                      while (( inode < nodes ))
                      do
#                         echo "*** all_files = \"$all_files\" "
                         files=`echo $all_files | cut -d" " -f1-$tasks_per_node`
                         all_files=`echo $all_files | cut -d" " -f$tp1-`
#                         echo "*** tasks_per_node = \"$tasks_per_node\" "
#                         echo "*** files = \"$files\" "
#                         echo "*** all_files = \"$all_files\" "
                        echo "tar  cvf \$PERM/${frelout[$i]}/${frelout[$i]}.node_$inode.tar $files"   >> archive_${frelout[$i]}
			### echo "tar  cvf ${frelout[$i]}.node_$inode.tar $files"   >> archive_${frelout[$i]}
			### echo "cp ${frelout[$i]}.node_$inode.tar \$PERM/${frelout[$i]}/"   >> archive_${frelout[$i]}
			 ###echo "rm ${frelout[$i]}.node_$inode.tar"   >> archive_${frelout[$i]}
#                         echo "dsmc incremental  \$PERM/${frelout[$i]}/${frelout[$i]}.node_$inode.tar" >> archive_${frelout[$i]}
#                         echo "dsmmigrate \$PERM/${frelout[$i]}/${frelout[$i]}.node_$inode.tar"        >> archive_${frelout[$i]}
                         (( inode = inode + 1 ))
                      done
#                      echo "rm  -rf  \$PERM/${frelout[$i]}.tar"       >> archive_${frelout[$i]}
#                      echo "tar  cvf \$PERM/${frelout[$i]}.tar ${frelout[$i]}" >> archive_${frelout[$i]}
                   fi
                elif [[ $archive_system = ut ]]
                then
                   echo "cd  $tmp_data_catalog"                       >> archive_${frelout[$i]}
                   if [[ $files_for_pes = false ]]
                   then
                         # EVENTUELL NOCH VORHANDENE DATEI IM ARCHIV LOSCHEN
                      echo "set -x"                                 >> archive_${frelout[$i]}
                      echo "rm  -rf  \$UT/${frelout[$i]}"           >> archive_${frelout[$i]}
                      echo "cp  ${frelout[$i]} \$UT/${frelout[$i]}" >> archive_${frelout[$i]}
                   else

                      echo "set -x"                                 >> archive_${frelout[$i]}
                      echo "rm  -rf  \$UT/${frelout[$i]}/*"         >> archive_${frelout[$i]}
                      echo "[[ ! -d \$UT/${frelout[$i]} ]] && mkdir $UT/${frelout[$i]}" >> archive_${frelout[$i]}
                      cd  $tmp_data_catalog
                      all_files=`ls -1 ${frelout[$i]}/*`
                      cd -  > /dev/null
                      (( inode = 0 ))
                      (( tp1   = tasks_per_node + 1 ))
                      while (( inode < nodes ))
                      do
                         files=`echo $all_files | cut -d" " -f1-$tasks_per_node`
                         all_files=`echo $all_files | cut -d" " -f$tp1-`
                         echo "tar  cvf \$UT/${frelout[$i]}/${frelout[$i]}.node_$inode.tar $files"   >> archive_${frelout[$i]}
                         (( inode = inode + 1 ))
                      done
                   fi
                elif [[ $archive_system = none ]]
                then
                   printf "              +++ archiving on $localhost not available!\n"
                fi

                if [[ $archive_system != none ]]
                then
                   if [[ $localhost = lcsgih  ||  $localhost = lcsgib ]]
                   then
#                      subjob  -d  -v  -q cdata  -X 0  -m 1000  -t 43200  -c $job_catalog  archive_${frelout[$i]}
                      subjob   -v  -q permq  -X 1 -T 1  -m 1000  -t 172800  -c $job_catalog  archive_${frelout[$i]}
                   elif [[ $localhost = nech ]]
                   then
                      subjob  -d  -c /pf/b/$usern/job_queue  -v  -q pp  -X 0  -m 1000  -t 7200  archive_${frelout[$i]}
                   fi
                   printf "              Archiving of $tmp_data_catalog/${frelout[$i]} initiated (batch job submitted)\n"
                fi
             else
                printf "              +++ caution: option -A is switched off. No archiving on $archive_system!\n"
             fi


                # LEERDATEI IM BENUTZERVERZEICHNIS ANLEGEN, DAMIT BEKANNT IST,
                # WIE DIE HOECHSTE ZYKLUSNUMMER AUF DEM ARCHIV-SYSTEM LAUTET
             if [[ $files_for_pes = false ]]
             then
                cat  /dev/null  >  ${pathout[$i]}
             else
                mkdir -p  ${pathout[$i]}
             fi

          fi


             # KOPIEREN AUF LOKALER MASCHINE ZUM ARCHIV-SYSTEM
             # AUSSERDEM MUSS LEERDATEI ANGELEGT WERDEN, DAMIT BEKANNT IST,
             # WIE DIE HOECHSTE ZYKLUSNUMMER AUF DEM ARCHIV-SYSTEM LAUTET
             # FALLS IRGENDEINE (VON MEHREREN) ARCHIVIERUNGEN SCHIEF GEHT,
             # WIRD FLAG GESETZT UND BLEIBT AUCH BEI WEITEREN ORDNUNGS-
             # GEMAESSEN ARCHIVIERUNGEN GESETZT
          if [[ "${actionout[$i]}" = ar ]]
          then
             if [[ $files_for_pes = false ]]
             then
                printf "\n  >>> OUTPUT: ${localout[$i]}  to"
                printf "\n              ${pathout[$i]}"
                printf "\n              File will be copied to archive-system ($archive_system) !\n"
             else
                printf "\n  >>> OUTPUT: ${localout[$i]}/_....  to"
                printf "\n              ${pathout[$i]}"
                printf "\n              Directory will be copied to archive-system ($archive_system) !\n"
             fi
             mv  ${localout[$i]}  ${frelout[$i]}

             file_saved=false

             if [[ $archive_system = asterix ]]
             then
                do_stageout=true
                (( stageout_anz = 0 ))
                while [[ $do_stageout = true ]]
                do
                   if [[ $files_for_pes = false ]]
                   then
                      stageout  ${frelout[$i]}  > STAGE_OUTPUT
                   else
                      stageout  -t  ${frelout[$i]}  > STAGE_OUTPUT
                   fi
                   cat  STAGE_OUTPUT
                   if [[ $(grep -c "st.msg:150"  STAGE_OUTPUT) != 0 ]]
                   then
                      file_saved=true
                      do_stageout=false
                   else
                      if [[ $files_for_pes = false ]]
                      then
                         printf "\n  +++ file ${frelout[$i]}  could not be saved on archive-system"
                      else
                         printf "\n  +++ directory ${frelout[$i]} could not be saved on archive-system"
                      fi
                      (( stageout_anz = stageout_anz + 1 ))
                      if (( stageout_anz == 10 ))
                      then
                         printf "\n  +++ stoped after 10 unsuccessful tries!"
                         archive_save=false
                         do_stageout=false
                      else
                         printf "\n  *** new try to store on archive after 15 min:"
                         sleep 900
                      fi
                   fi
                done
             elif [[ $archive_system = DMF ]]
             then
                if [[ $files_for_pes = false ]]
                then
                   printf "\n  +++ archiving of single files impossible on $archive_system!\n"
                   locat=DMF
                   exit
                else
                   rm -rf  $ARCHIVE/${frelout[$i]}
                   cp -r  ${frelout[$i]}  $ARCHIVE
                fi
                file_saved=true
             elif [[ $archive_system = tivoli ]]
             then
                   # ARCHIVIERUNG NUR PER BATCH-JOB MOEGLICH
                   # DATEI MUSS ZWISCHENZEITLICH INS TEMPORAERE DATENVERZEICHNIS
                   # GELEGT WERDEN
                [[ ! -d $tmp_data_catalog ]]  &&  mkdir -p  $tmp_data_catalog
                chmod  g+rx  $tmp_data_catalog
                if [[ $files_for_pes = false ]]
                then
                   ln -f  ${frelout[$i]}  $tmp_data_catalog/${frelout[$i]}
                else
                   mkdir  $tmp_data_catalog/${frelout[$i]}
                   ln -f  ${frelout[$i]}/*  $tmp_data_catalog/${frelout[$i]}
                fi

                   # BATCH JOB GENERIEREN UND ABSCHICKEN; DATEI MUSS WIEDER
                   # AUS TEMPORAEREM DATENVERZEICHNIS ENTFERNT WERDEN
                echo "cd  $tmp_data_catalog"                       >  archive_${frelout[$i]}
                if [[ $files_for_pes = false ]]
                then
                      # EVENTUELL NOCH VORHANDENE DATEI IM ARCHIV LOSCHEN
                   echo "rm  -rf  \$PERM/${frelout[$i]}"           >> archive_${frelout[$i]}
                   echo "cp  ${frelout[$i]} \$PERM/${frelout[$i]}" >> archive_${frelout[$i]}
                   echo "rm  -rf  ${frelout[$i]}"                  >> archive_${frelout[$i]}
                else
                   echo "rm  -rf  \$PERM/${frelout[$i]}.tar"       >> archive_${frelout[$i]}
                   echo "tar  cvf \$PERM/${frelout[$i]}.tar ${frelout[$i]}" >> archive_${frelout[$i]}
                   echo "rm  -rf  ${frelout[$i]}"                  >> archive_${frelout[$i]}
                fi

                subjob  -v  -d  -q cdata  -X 0  -m 1000  -t 43200  -c $job_catalog  archive_${frelout[$i]}
                printf "              Archiving of $tmp_data_catalog/${frelout[$i]} initiated (batch job submitted)\n"
                file_saved=true

             elif [[ $archive_system = ut ]]
             then
                   # ARCHIVIERUNG NUR PER BATCH-JOB MOEGLICH
                   # DATEI MUSS ZWISCHENZEITLICH INS TEMPORAERE DATENVERZEICHNIS
                   # GELEGT WERDEN
                [[ ! -d $tmp_data_catalog ]]  &&  mkdir -p  $tmp_data_catalog
                chmod  g+rx  $tmp_data_catalog
                if [[ $files_for_pes = false ]]
                then
                   ln -f  ${frelout[$i]}  $tmp_data_catalog/${frelout[$i]}
                else
                   mkdir  $tmp_data_catalog/${frelout[$i]}
                   ln -f  ${frelout[$i]}/*  $tmp_data_catalog/${frelout[$i]}
                fi

                   # BATCH JOB GENERIEREN UND ABSCHICKEN; DATEI MUSS WIEDER
                   # AUS TEMPORAEREM DATENVERZEICHNIS ENTFERNT WERDEN
                echo "cd  $tmp_data_catalog"                       >  archive_${frelout[$i]}
                if [[ $files_for_pes = false ]]
                then
                      # EVENTUELL NOCH VORHANDENE DATEI IM ARCHIV LOSCHEN
                   echo "rm  -rf  \$UT/${frelout[$i]}"           >> archive_${frelout[$i]}
                   echo "cp  ${frelout[$i]} \$UT/${frelout[$i]}" >> archive_${frelout[$i]}
                   echo "rm  -rf  ${frelout[$i]}"                >> archive_${frelout[$i]}
                else
                   echo "rm  -rf  \$UT/${frelout[$i]}.tar"       >> archive_${frelout[$i]}
                   echo "tar  cvf \$UT/${frelout[$i]}.tar ${frelout[$i]}" >> archive_${frelout[$i]}
                   echo "rm  -rf  ${frelout[$i]}"                >> archive_${frelout[$i]}
                fi

                subjob  -v  -c /pf/b/$usern/job_queue  -d  -q pp  -X 0  -m 1000  -t 7200  archive_${frelout[$i]}
                printf "              Archiving of $tmp_data_catalog/${frelout[$i]} initiated (batch job submitted)\n"
                file_saved=true

             else
                printf "\n  +++ archive_system=\"$archive_system\"  archiving impossible!"
                archive_save=false
             fi
             if [[ $file_saved = true ]]
             then
                if [[ $files_for_pes = false ]]
                then
                   cat  /dev/null  >  ${pathout[$i]}
                else
                   mkdir -p  ${pathout[$i]}
                fi
             fi
          fi

             # APPEND AUF LOKALER MASCHINE
          if [[ "${actionout[$i]}" = "a" ]]
          then
             printf "\n  >>> OUTPUT: ${localout[$i]}  append to  ${pathout[$i]}\n"
             cat  ${localout[$i]}  >>  ${pathout[$i]}
          fi

             # KOPIEREN AUF LOKALER MASCHINE
             # ES MUSS KOPIERT WERDEN, DA MOVE NICHT UEBER FILESYSTEM HINAUS MOEGLICH
          if [[ "${actionout[$i]}" = ""  &&  $files_for_pes = false ]]
          then

                # KOPIEREN AUF EINPROZESSORMASCHINE
             if [[ "${extout[$i]}" != " "  &&  "${extout[$i]}" != "" ]]
             then
                printf "\n  >>> OUTPUT: ${localout[$i]}  to  ${pathout[$i]}.${extout[$i]}\n"
		if [[ $link_local_output = true ]]
		then
		    printf "      using ln -f\n"
		    ln -f  ${localout[$i]}  ${pathout[$i]}.${extout[$i]}
		fi
		# If "ln -f" fails of if "$link_local_output = false" do a normal "cp"
		if [[ ! -f "${pathout[$i]}.${extout[$i]}" ]]
                then
		    if [[ $link_local_output = true ]]
	            then
			printf "      ln failed, using cp...\n"
		    fi
		    cp  ${localout[$i]}  ${pathout[$i]}.${extout[$i]}
                fi
             else
                printf "\n  >>> OUTPUT: ${localout[$i]}  to  ${pathout[$i]}\n"
		if [[ $link_local_output = true ]]
		then
		    printf "      using ln -f\n"
		    ln -f  ${localout[$i]}  ${pathout[$i]}
		fi
		# If "ln -f" fails of if "$link_local_output = false" do a normal "cp"
		if [[ ! -f "${pathout[$i]}" ]]
                then
		    if [[ $link_local_output = true ]]
	            then
			printf "      ln failed, using cp...\n"
		    fi
		    cp  ${localout[$i]}  ${pathout[$i]}
                fi
             fi

          elif [[ "${actionout[$i]}" = ""  &&  $files_for_pes = true ]]
          then

                # DIE DEN PROZESSOREN EINES PARALLELRECHNERS ZUGEHOERIGEN
                # DATEIEN WERDEN ERST IN EINEM KATALOG GESAMMELT UND DIESER
                # WIRD DANN KOPIERT
                # PER MOVE UMBENANNT WERDEN
             printf "\n  >>> OUTPUT: ${localout[$i]}/_....  to  ${pathout[$i]}\n"
	     if [[ $link_local_output = true ]]
	     then
		 printf "      using ln -f\n"
		 mkdir  ${pathout[$i]}
		 cd ${localout[$i]}
		 for file in $(ls *)
		 do
		   ln -f $file  ${pathout[$i]}
		 done
		 cd $TEMPDIR
	     fi
             # If "ln -f" fails of if "$link_local_output = false" do a normal "cp -r"
	     if [[ ! -f "${pathout[$i]}/_0000" ]]
             then
		 if [[ $link_local_output = true ]]
		 then
		     printf "      ln failed for .../_0000, using cp...\n"
		 fi
		 cp -r  ${localout[$i]}  ${pathout[$i]}
	     fi

          fi
       fi
    done
    if (( i != 0 ))
    then
       if [[ $transfer_problems = true ]]
       then
          printf "\n$striche\n  *** OUTPUT-files saved"
          printf "\n  +++ WARNING: some data transfers failed! \n"
       else
          printf "\n$striche\n  *** all OUTPUT-files saved \n"
       fi
    fi


       # EVENTUELL FOLGEJOB STARTEN
       # DATEI CONTINUE_RUN MUSS VOM BENUTZERPROGRAMM AUS ERZEUGT WERDEN
    if [[ -f CONTINUE_RUN ]]
    then

       if [[ $archive_save = true ]]
       then

             # ZUERST IN MRUN-AUFRUF OPTIONEN FUER FORTSETZUNGSLAUF, FUER
             # STILLES ABARBEITEN (OHNE INTERAKTIVE RUECKFAGEN) UND FUER
             # BATCH-BETRIEB (NUR WICHTIG, FALLS BATCH AUF LOKALER MASCHINE
             # DURCHGEFUEHRT WERDEN SOLL) EINFUEGEN, FALLS NICHT BEREITS VOR-
             # HANDEN
          [[ $(echo $mc | grep -c "\-C") = 0 ]]  &&  mc="$mc -C"
          [[ $(echo $mc | grep -c "\-v") = 0 ]]  &&  mc="$mc -v"
          [[ $(echo $mc | grep -c "\-b") = 0 ]]  &&  mc="$mc -b"
          if [[ $(echo $mc | grep -c "#") != 0 ]]
          then
             mc=`echo $mc | sed 's/#/f/g'`
          fi


             # JOB STARTEN
          printf "\n\n  *** initiating restart-run on \"$return_addres\" using command:\n"
          echo "      $mc"
          printf "\n$striche\n"
          if [[ $localhost != $fromhost ]]
          then

             if [[ $localhost = lcsgih  ||  $localhost = lcsgib  ||  $localhost = nech  ||  $localhost = ibmh  ||  $localhost = ibmku  ||  $localhost = ibms ]]
             then
                echo "*** ssh will be used to initiate restart-runs!"
                echo "    return_addres=\"$return_addres\" "
                echo "    return_username=\"$return_username\" "
                if [[ $(echo $return_addres | grep -c "130.75.105") = 1 ]]
                then
                   ssh $return_addres -l $return_username "PATH=\$PATH:$LOCAL_MRUN_PATH;export LD_LIBRARY_PATH=\$LD_LIBRARY_PATH:/muksoft/packages/intel/Compiler/11.0/083/lib/intel64/;export PALM_BIN=$LOCAL_MRUN_PATH;cd $LOCAL_PWD; $mc "
                else
                   ssh $return_addres -l $return_username "PATH=\$PATH:$LOCAL_MRUN_PATH;export PALM_BIN=$LOCAL_MRUN_PATH;cd $LOCAL_PWD; $mc "
                fi
             else
                printf "\n  +++ no restart mechanism available for host \"$localhost\" "
                locat=restart; exit
             fi

                # WARTEN, DAMIT SICH RESTART JOB IN QUEUE EINREIHEN KANN, BEVOR
                # DER AKTUELLE JOB ENDET
	     if [[ $queue = special1q ]]
	     then
                sleep 120
	     else
	        sleep 30
	     fi

          else

                # BEI RECHNUNGEN AUF LOKALER MASCHINE KANN MRUN DIREKT AUFGE-
                # RUFEN WERDEN, AUSSER AUF lcfimm
             cd $LOCAL_PWD
             if [[ $localhost = lcfimm ]]
             then
                ssh $return_addres -l $return_username "PATH=\$PATH:$LOCAL_MRUN_PATH;export PALM_BIN=$LOCAL_MRUN_PATH;cd $LOCAL_PWD; $mc " 
             else
                eval  $mc                # ' MUESSEN AUSGEWERTET WERDEN
             fi
             cd -  > /dev/null
          fi
          printf "\n$striche\n  *** restart-run initiated \n"


             # EVENTUELL INPUT-DATEIEN, DIE VON TEMPORAEREM DATENVERZEICHNIS
             # GEHOLT WORDEN SIND, LOESCHEN
          (( i = 0 ))
          while (( i < iin ))
          do
             (( i = i + 1 ))
             if [[ "${got_tmp[$i]}" = true   &&  $keep_data_from_previous_run = false ]]
             then
                rm -r  $tmp_data_catalog/${frelin[$i]}
             fi
          done

       else

          printf "\n  +++ no restart-run possible, since errors occured"
          printf "\n      during the archive process"
       fi

    fi


    
       # EVTL. EMAIL-BENACHRICHTIGUNG UEBER ABGESCHLOSSENEN LAUF
    if [[ "$email_notification" != "none" ]]
    then

       if [[ $localhost != $fromhost ]]
       then
          if [[ -f CONTINUE_RUN ]]
          then
             echo "PALM restart run necessary"        >   email_text
             echo "description header of actual run:" >>  email_text
             cat  CONTINUE_RUN                        >>  email_text
             echo "mrun-command to restart:"          >>  email_text
             echo "$mc"                               >>  email_text
          else
             echo "PALM run with base filename \"$fname\" on host \"$localhost\" finished"  >  email_text
          fi
          mail  $email_notification  <  email_text
          printf "\n  *** email notification sent to \"$email_notification\" "
       fi
    fi



       # ALLE ARBEITEN BEENDET. TEMPORAERER KATALOG KANN GELOESCHT WERDEN
    cd  $HOME
    [[ $delete_temporary_catalog = true ]]  &&  rm -rf $TEMPDIR

 else


       # FALLS AUF REMOTE-MASCHINE GERECHNET WERDEN SOLL, WERDEN JETZT ENTSPRE-
       # CHENDE AKTIONEN DURCHGEFUEHRT

       # MRUN-BEFEHL FUER REMOTE-MASCHINE ZUSAMMENSTELLEN
    mrun_com="$mrun_script_name -a $afname -c $config_file -d $fname -h $host -H $fromhost -m $memory -t $cpumax -q $queue -R $return_addres -U $return_username -u $remote_username"
    [[ "$cpp_opts" != "" ]]       &&  mrun_com=${mrun_com}" -D \"$cpp_opts\""
    [[ "$global_revision" != "" ]]  &&  mrun_com=${mrun_com}" -G \"$global_revision\""
    [[ $group_number != none ]]   &&  mrun_com=${mrun_com}" -g $group_number"
    [[ $do_compile = true ]]      &&  mrun_com=${mrun_com}" -s \"$source_list\""
    [[ "$input_list" != "" ]]     &&  mrun_com=${mrun_com}" -i \"$input_list\""
    [[ $ignore_archive_error = true ]]  &&  mrun_com=${mrun_com}" -I"
    [[ $keep_data_from_previous_run = true ]]  &&  mrun_com=${mrun_com}" -k"
    [[ "$additional_conditions" != "" ]]  &&  mrun_com=${mrun_com}" -K \"$additional_conditions\""
#    [[ "$makefile" != "$source_path/Makefile" ]]  &&  mrun_com=${mrun_com}" -M \"$makefile\""
    [[ "$output_list" != "" ]]    &&  mrun_com=${mrun_com}" -o \"$output_list\""
    [[ "$read_from_config" = false ]]  &&  mrun_com=${mrun_com}" -S"
    [[ $do_trace = true ]]        &&  mrun_com=${mrun_com}" -x"
    [[ "$numprocs" != "" ]]       &&  mrun_com=${mrun_com}" -X $numprocs"
    if [[ $use_openmp = true ]]
    then
       mrun_com=${mrun_com}" -O $threads_per_task"
    fi
    [[ "$tasks_per_node" != "" ]] &&  mrun_com=${mrun_com}" -T $tasks_per_node"
    [[ $store_on_archive_system = true ]]  &&  mrun_com=${mrun_com}" -A"
    [[ $package_list != "" ]]     &&  mrun_com=${mrun_com}" -p \"$package_list\""
    [[ $return_password != "" ]]  &&  mrun_com=${mrun_com}" -P $return_password"
    [[ $delete_temporary_catalog = false ]]  &&  mrun_com=${mrun_com}" -B"
    [[ $node_usage != default  &&  "$(echo $node_usage | cut -c1-3)" != "sla"  &&  $node_usage != novice ]]  &&  mrun_com=${mrun_com}" -n $node_usage"
    [[ "$ocean_file_appendix" = true ]]  &&  mrun_com=${mrun_com}" -y"
    [[ $run_coupled_model = true ]]  &&  mrun_com=${mrun_com}" -Y \"$coupled_dist\""
    if [[ $do_remote = true ]]
    then
       printf "\n>>>> MRUN-command on execution host:\n>>>> $mrun_com \n"
    fi


       # ZUSAMMENSTELLUNG DES JOBSCRIPTS AUF DATEI jobfile
    jobfile=jobfile.$RANDOM


       # TEMPORAERES VERZEICHNIS GENERIEREN UND NACH DORT WECHSELN
    echo  "mkdir  $TEMPDIR"      >>  $jobfile
    echo  "cd  $TEMPDIR"         >>  $jobfile


       # EVENTUELL FEHLERVERFOLGUNG AKTIVIEREN
    if [[ $do_trace = true ]]
    then
       echo  "set -x"                                    >>  $jobfile
    else
       echo  "set +vx"                                   >>  $jobfile
    fi


       # BEREITSTELLUNG VON QUELLTEXTEN, MRUN-SCRIPTS UND KONFIGURATIONS-
       # DATEI FUER DEN JOB
    if [[ $( echo $host | cut -c1-5 ) = lcsgi ]]
    then

          # KONFIGURATIONSDATEI UND MRUN_SCRIPT IN DAS SOURCE-VERZEICHNIS
          # KOPIEREN
       if [[ $restart_run != true ]]
       then
          cp  $config_file  $working_directory/SOURCES_FOR_RUN_$fname
          cp  ${PALM_BIN}/$mrun_script_name  $working_directory/SOURCES_FOR_RUN_$fname
       fi

          # SOURCE-VERZEICHNIS VOM LOKALEN RECHNER PER SCP TRANSFERIEREN
       echo  "set -x"  >>  $jobfile
       echo  "scp  -r  $return_username@$return_addres:$working_directory/SOURCES_FOR_RUN_$fname ."  >>  $jobfile
       echo  "export SOURCES_COMPLETE=true"                      >>  $jobfile

          # QUELLTEXTE, MRUN-SCRIPT UND KONFIGURATIONSDATEI IN DAS AKTUELLE
          # ARBEITSVERZEICHNIS VERSCHIEBEN
       echo  "mv  SOURCES_FOR_RUN_$fname/$config_file  . "       >>  $jobfile
       echo  "mv  SOURCES_FOR_RUN_$fname/$mrun_script_name  . "  >>  $jobfile
       echo  "execute_mrun=true"                                 >>  $jobfile
       echo  " "                                                 >>  $jobfile

    else

          # ABSPEICHERN DER QUELLTEXTE (NUR FALLS UEBERSETZT WERDEN SOLL)
          # SOWIE GEGEBENENFALLS DES MAKEFILES
       if [[ $do_compile = true ]]
       then

          source_catalog=SOURCES_FOR_RUN_$fname

              # UNTERVERZEICHNIS FUER QUELLTEXTE UND MAKEFILE ANLEGEN
              # MRUN WIRD DIESES VRZEICHNIS UEBER ENVIRONMENT VARIABLE
              # MITGETEILT (UEBERSTEUERT ANGABE IN KONFIGURATIONSDATEI)
          echo  "mkdir  SOURCES_FOR_RUN_$fname"                >>  $jobfile
          echo  "export SOURCES_COMPLETE=true"                 >>  $jobfile
          echo  "cd     SOURCES_FOR_RUN_$fname"                >>  $jobfile

          for  filename  in  $source_list
          do
                # ABDECKZEICHEN VERHINDERN, DASS ERSETZUNGEN ERFOLGEN
             echo  "cat > $filename << \"%END%\""              >>  $jobfile
             cat   $source_catalog/$filename                   >>  $jobfile
             echo  " "                                         >>  $jobfile
             echo  "%END%"                                     >>  $jobfile
             echo  " "                                         >>  $jobfile
          done

             # ABDECKZEICHEN VERHINDERN, DASS ERSETZUNGEN ERFOLGEN
          echo  "cat > Makefile << \"%END%\""               >>  $jobfile
          cat   $source_catalog/Makefile                    >>  $jobfile
          echo  " "                                         >>  $jobfile
          echo  "%END%"                                     >>  $jobfile
          echo  " "                                         >>  $jobfile

          echo  "cd -  > /dev/null"                         >>  $jobfile

       fi


          # ABSPEICHERN DER KONFIGURATIONSDATEI
          # ABDECKZEICHEN VERHINDERN, DASS ERSETZUNGEN ERFOLGEN
       echo  "cat > $config_file << \"%END%\""      >>  $jobfile
       cat   $config_file                           >>  $jobfile
       echo  "%END%"                                >>  $jobfile
       echo  " "                                    >>  $jobfile


          # ABSPEICHERN DER AKTUELLEN MRUN-VERSION
          # ABDECKZEICHEN VERHINDERN, DASS ERSETZUNGEN ERFOLGEN
       echo  "cat > $mrun_script_name <<\"%END%\""  >>  $jobfile
       cat   ${PALM_BIN}/$mrun_script_name          >>  $jobfile
       echo  "%END%"                                >>  $jobfile
       echo  "chmod u+x $mrun_script_name"          >>  $jobfile
       echo  "execute_mrun=true"                    >>  $jobfile
       echo  " "                                    >>  $jobfile

    fi


       # EVTL. BENOETIGTE INPUT-DATEIEN PER FTP HOLEN ODER DEM JOB DIREKT
       # MITGEBEN UND AUF DEM REMOTE-RECHNER IM BENUTZERVERZEICHNIS ABLEGEN
       # FALLS DIESES NICHT EXISTIERT, WIRD VERSUCHT, DAS JEWEILS LETZTE
       # UNTERVERZEICHNIS DES PFADNAMENS ANZULEGEN
    if [[ $do_remote = true ]]
    then
       (( i = 0 ))
       while (( i < iin ))
       do
          (( i = i + 1 ))
          echo  "[[ ! -d ${pathin[$i]} ]]  &&  mkdir -p  ${pathin[$i]}"  >>  $jobfile
          if [[ "${transin[$i]}" = job ]]
          then
             echo  "cat > ${remotepathin[$i]} <<\"%END%\""    >>  $jobfile
             eval cat   ${pathin[$i]}/${frelin[$i]}           >>  $jobfile
             echo  " "                                        >>  $jobfile
             echo  "%END%"                                    >>  $jobfile
          else
             echo  "batch_scp -b -o -g -s -u $return_username $return_addres ${remotepathin[$i]} \"${pathin[$i]}\" ${frelin[$i]}" >>  $jobfile
          fi

             # UEBERPRUEFEN, OB DATEI ANGELEGT WERDEN KONNTE
          echo  "if [[ \$? = 1 ]]"                    >>  $jobfile
          echo  "then"                                >>  $jobfile
          echo  "   echo \" \" "                      >>  $jobfile
          echo  "   echo \"+++ file ${remotepathin[$i]} could not be created\" "   >>  $jobfile
          echo  "   echo \"    please check, if directory exists on $host!\" "  >>  $jobfile
          echo  "   echo \"+++ MRUN will not be continued\" "  >>  $jobfile
          echo  "   execute_mrun=false"               >>  $jobfile
          echo  "fi"                                  >>  $jobfile
       done
    fi

       # ARBEITSKATALOG AUF DER LOKALEN MASCHINE FUER EVENTUELLE 
       # FORTSETZUNGSLAUEFE PER ENV-VARIABLE UEBERGEBEN
    echo  "LOCAL_PWD=$working_directory"                >>  $jobfile
    echo  "export LOCAL_PWD"                            >>  $jobfile

       # EBENSO LOKALEN MRUN-KATALOG UEBERGEBEN 
    echo  "LOCAL_MRUN_PATH=$PALM_BIN"                   >>  $jobfile
    echo  "export LOCAL_MRUN_PATH"                      >>  $jobfile

       # WORKAROUND FUER RIAM-NEC-JOBS WEGEN PROFILE-SCHWIERIGKEITEN
    if [[ $localhost_realname = "gate"  ||  $localhost = lctit ]]
    then
       echo  "export PALM_BIN=$PALM_BIN"                >>  $jobfile
    fi

       # MRUN AUF ZIELRECHNER AUFRUFEN
    echo  "set -x"                                      >>  $jobfile
    echo  "[[ \$execute_mrun = true ]]  &&  ./$mrun_com"  >>  $jobfile

    echo  'ls -al; echo `pwd`'                          >>  $jobfile
    echo  "cd \$HOME"                                   >>  $jobfile
    echo  "rm -rf  $TEMPDIR"                            >>  $jobfile




       # JOB PER SUBJOB STARTEN
    if [[ $silent = false ]]
    then
       printf "\n     "
    else
       printf "\n\n"
    fi

    subjob  $job_on_file  -h $host  -u $remote_username -g $group_number -q $queue  -m $memory  -N $node_usage -t $cpumax  $XOPT  $TOPT  $OOPT  -n $fname  -v  -c $job_catalog  -e $email_notification  $jobfile
    rm -rf  $jobfile


 fi  # ENDE REMOTE-TEIL



     # ENDE DER PROZEDUR
