PALM error messages

Explanation

PA****
Identifier for messages in the PALM standard code
UI****
Identifier for messages in "user_" routines
NC****
Identifier for messages from the NetCDF library
Message identifier Error message
PA0001

"host" is not set. Please check that environment variable "localhost" is set before running PALM

PA0002

illegal coupling mode: ...

PA0003

dt_coupling is not set but required for coupling mode "..."

PA0004

coupling mode "...": dt_coupling = ... is not equal to dt_coupling_remote = ...

PA0005

coupling mode "...": dt_coupling <= 0.0 is not allowed and is reset to MAX(dt_max(A,O)) = ...

PA0006

coupling mode "...": restart_time = ... is not equal to restart_time_remote = ...

PA0007

coupling mode "...": dt_restart = ... is not equal to dt_restart_remote = ...

PA0008

coupling mode "...": simulation_time_since_reference = ... is not equal to simulation_time_since_reference_remote = ...

PA0009

coupling mode "...": dx = ... is not equal to dx_remote = ...

PA0010

coupling mode "...": dy = ... is not equal to dy_remote = ...

PA0011

coupling mode "...": nx = ... is not equal to nx_remote = ...

PA0012

coupling mode "...": ny = ... is not equal to ny_remote = ...

PA0013

illegal value given for loop_optimization: "..."

PA0014

a non-flat topography does not allow ...

PA0015

ocean = .T. does not allow ...

PA0016

unknown solver for perturbation pressure: psolver = "..."

PA0017

psolver = "..." only works for a 1d domain-decomposition along x please do not set npey/=1 in the parameter file

PA0018

psolver = ".." does not work for subdomains with unequal size please set grid_matching = ''strict'' in the parameter file

PA0019

psolver = "..." only works for a parallel environment

PA0020

unknown multigrid cycle: cycle_mg = "..."

PA0021

unknown fft-algorithm: fft_method = "..."

PA0022

unknown advection scheme: momentum_advec = "..."

PA0023

momentum_advec = "..." is not allowed with timestep_scheme = "..."

PA0024

unknown advection scheme: scalar_advec = "..."

PA0025

use_upstream_for_tke set .TRUE. because use_sgs_for_particles = .TRUE.

PA0026

use_upstream_for_tke = .TRUE. not allowed with timestep_scheme = "..."

PA0027

unknown timestep scheme: timestep_scheme = "..."

PA0028

scalar advection scheme "..." does not work with timestep_scheme ".."

PA0029

momentum advection scheme "..." does not work with timestep_scheme "..."

PA0030

initializing_action = "..." unkown or not allowed

PA0031

initializing_actions = "set_constant_profiles" and "set_1d-model_profiles" are not allowed simultaneously

PA0032

initializing_actions = "set_constant_profiles" and "by_user" are not allowed simultaneously

PA0033

initializing_actions = "by_user" and "set_1d-model_profiles" are not allowed simultaneously

PA0034

cloud_physics = ... is not allowed with humidity = ...

PA0035

precipitation = ... is not allowed with cloud_physics = ...

PA0036

humidity = .TRUE. and sloping_surface = .TRUE. are not allowed simultaneously

PA0037

UPS-scheme is not implemented for humidity = .TRUE.

PA0038

humidity = .TRUE. and passive_scalar = .TRUE. is not allowed simultaneously'

PA0039

UPS-scheme is not implemented for passive_scalar = .TRUE.

PA0040

illegal value "..." found for parameter grid_matching

PA0041

plant_canopy = .TRUE. requires a non-zero drag coefficient given value is drag_coefficient = 0.0

PA0042

use_top_fluxes must be .TRUE. in ocean version

PA0043

ABS( alpha_surface = ... ) must be< 90.0

PA0044

dt = ... <= 0.0

PA0045

cfl_factor = ... out of range 0.0 < cfl_factor <= 1.0 is required

PA0046

baroclinicity (ug) not allowed simultaneously with galilei transformation

PA0047

baroclinicity (vg) not allowed simultaneously with galilei transformation

PA0048

variable translation speed used for galilei-transformation, which may cause instabilities in stably stratified regions

PA0049

unknown boundary condition: bc_lr = "..."

PA0050

unknown boundary condition: bc_ns = "..."

PA0051

non-cyclic lateral boundaries do not allow psolver = "..."

PA0052

non-cyclic lateral boundaries do not allow momentum_advec = "..."

PA0053

non-cyclic lateral boundaries do not allow scalar_advec = "..."

PA0054

non-cyclic lateral boundaries do not allow galilei_transformation = .T.

PA0055

adjust_mixing_length = TRUE and bc_e_b = "neumann"

PA0056

adjust_mixing_length = FALSE and bc_e_b = "..."

PA0057

boundary condition bc_e_b changed to "..."

PA0058

unknown boundary condition: bc_e_b = "..."

PA0059

unknown boundary condition: bc_p_b = "..."

PA0060

boundary condition: bc_p_b = "..." not allowed with prandtl_layer = .FALSE.'

PA0061

unknown boundary condition: bc_p_t = "..."

PA0062

unknown boundary condition: bc_pt_b = "..."

PA0063

unknown boundary condition: bc_pt_t = "..."

PA0064

both, top_momentumflux_u AND top_momentumflux_v must be set

PA0065

boundary_condition: bc_pt_b = "..." is not allowed with constant_heatflux = .TRUE.

PA0066

constant_heatflux = .TRUE. is not allowed with pt_surface_initial_change (/=0) = ...

PA0067

boundary_condition: bc_pt_t = "..." is not allowed with constant_top_heatflux = .TRUE.

PA0068

unknown boundary condition: bc_sa_t = "..."

PA0069 boundary condition: bc_sa_t = "..." requires to set top_salinityflux

PA0070

boundary condition: bc_sa_t = "..." is not allowed with constant_top_salinityflux = .TRUE.'

PA0071

unknown boundary condition: bc_..._b ="..."

PA0072

unknown boundary condition: bc_..._t ="..."

PA0073

boundary condition: bc_..._b = "..." is not allowed with prescribed surface flux

PA0074

a prescribed surface flux is not allowed with ..._surface_initial_change (/=0) = ...

PA0075

boundary condition: bc_uv_b = "..." is not allowed with prandtl_layer = .TRUE.

PA0076

unknown boundary condition: bc_uv_b = "..."

PA0077

unknown boundary condition: bc_uv_t = "..."

PA0078

rayleigh_damping_factor = ... out of range [0.0,1.0]

PA0079

rayleigh_damping_height = ... out of range [0.0, ...]

PA0080

overshoot_limit_... < 0.0 is not allowed

PA0081 ups_limit_... < 0.0 is not allowed

PA0082

number of statistic_regions = ... but only 10 regions are allowed

PA0083

normalizing_region = ... must be >= 0 and <= ... (value of statistic_regions)

PA0084

dt_sort_particles is reset to 0.0 because of cloud_droplets = .TRUE.

PA0085

averaging_interval = ... must be <= dt_data_output = ...

PA0086

averaging_interval_pr = ... must be <= dt_dopr = ...

PA0087

averaging_interval_sp = ... must be <= dt_dosp = ...

PA0088

dt_averaging_input = ... must be <= averaging_interval = ...

PA0089

dt_averaging_input_pr = ... must be <= averaging_interval_pr = ...

PA0090

precipitation_amount_interval = ... must not be larger than dt_do2d_xy = ...

PA0091

data_output_pr = ... is not implemented for ocean = .FALSE.'

PA0092

data_output_pr = ... is not implemented for humidity = .FALSE.'

PA0093

data_output_pr = ... is not implemented for passive_scalar = .FALSE.'

PA0094

data_output_pr = ... is not implemented for cloud_physics = .FALSE.'

PA0095

data_output_pr = ... is not implemented for cloud_physics = .FALSE. and humidity = .FALSE.

PA0096

data_output_pr = ... is not implemented for cloud_physics = .FALSE. or cloud_droplets = .FALSE

PA0097

illegal value for data_output_pr or data_output_pr_user = "..."

PA0098

illegal value for data_output_pr = "..."

PA0099

z_max_do1d = ... must be >= ... or <= ...

PA0100

unknown normalization method cross_normalized_x = "..."

PA0101

unknown normalization method cross_normalized_y = "..."

PA0102

number of output quantitities given by data_output and data_output_user exceeds the limit of 100

PA0103

output of "..." requires constant_diffusion = .FALSE.

PA0104

output of "..." requires a "particles_par"-NAMELIST in the parameter file (PARIN)

PA0105

output of "..." requires humidity = .TRUE.

PA0106

output of "" requires cloud_physics = .TRUE. or cloud_droplets = .TRUE.'

PA0107

output of "..." requires cloud_droplets = .TRUE.

PA0108

output of "..." requires cloud_physics = .TRUE.

PA0109

output of "..." requires ocean = .TRUE.

PA0110

output of "..." requires passive_scalar = .TRUE.

PA0111

illegal value for data_output: "..." only 2d-horizontal cross sections are allowed for this value

PA0112

output of "..." requires precipitation = .TRUE.

PA0113

temporal averaging of precipitation amount "..." is not possible'

PA0114

illegal value for data_output or data_output_user = "..."

PA0115

illegal value for data_output = "..."

PA0116 z_max_do2d = ..., z_max_do2d must be >= ... (zu(nzb+1)) and <= ...(zu(nzt))

PA0117

do3d_compress = .TRUE. not allowed on host ""

PA0118

illegal precision: do3d_comp_prec ( ...) = "..."

PA0119

unknown variable "..." given for do3d_comp_prec(...)

PA0120

unknown value for data_output_format "..."

PA0121

km_constant = ... < 0.0

PA0122

prandtl_number = ... < 0.0

PA0123

prandtl_layer is not allowed with fixed value of km

PA0124

outflow_damping width out of range

PA0125

rif_min = ... must be less than rif_max = ...

PA0126

disturbance_level_b = ... must be >= ... (zu(3))

PA0127

disturbance_level_b = ... must be <= ... (zu(nzt-2))

PA0128

disturbance_level_t = ... must be <= ... (zu(nzt-2))

PA0129

disturbance_level_t = ... must be >= disturbance_level_b = ...

PA0130

disturbance_level_ind_t =... must be >= disturbance_level_b = ...

PA0131

inflow_disturbance_begin out of range

PA0132

inflow_disturbance_end out of range

PA0133

turbulent_inflow = .T. requires a Dirichlet condition at the inflow boundary

PA0134

illegal value for recycling_width: ...

PA0135

unknown random generator: random_generator = "..."

PA0136

damp_level_1d = ... must be > 0.0 and < ... (zu(nzt+1))

PA0137

mixing_length_1d = "..." is unknown

PA0138

dissipation_1d = "..." is unknown

PA0139

termination_time_needed = ... must be > 30.0 on host ...

PA0140

termination_time_needed = ... should be >= 300.0 on host "..."

PA0141

coupling requires PALM to be called with ''mrun -K parallel''

PA0142

absolute temperature < 0.0 at zu(...) = ...

PA0143

k=... j=... i=... ql_c=... part(...)%wf=... delta_r=...

PA0144

#1 k=... j=... i=... e_s=... e_a=... t_int=... d_radius=... delta_r=... particle_radius=...

PA0145

collision_efficiency out of range: ...

PA0146

maximum_number_of_particles needs to be increased but this is not allowed with NetCDF output switched on

PA0147

maximum_number_of_tails needs to be increased but this is not allowed with NetCDF output switched on

PA0148

particle too fast. n = ...

PA0149

particle out of range: i=... j=... k=... nxl=... nxr=... nys=... nyn=... nzb=... nzt=...

PA0150

Both dp_external and conserve_volume_flow are .TRUE. but one of them must be .FALSE.

PA0151

dp_level_b = ... is out of range

PA0152

dp_external is .TRUE. but dpdxy is zero, i.e. the external pressure gradient will not be applied

PA0153

dpdxy is nonzero but dp_external is .FALSE., i.e. the external pressure gradient will not be applied

PA0154

unknown conserve_volume_flow_mode: ...

PA0155

noncyclic boundary conditions require conserve_volume_flow_mode = ''inflow_profile''

PA0156

cyclic boundary conditions require conserve_volume_flow_mode = ''initial_profiles'' or ''bulk_velocity'' requires noncyclic boundary conditions

PA0137

nonzero bulk velocity requires conserve_volume_flow = .T. and conserve_volume_flow_mode = ''bulk_velocity''

PA0158

no vertical boundary condition for variable "..."

PA0159

no term for component "..."

PA0160

non-cyclic lateral boundaries along x do not allow calculation of spectra along x

PA0161

sorry, calculation of spectra in non parallel mode is still not realized

PA0162

non-cyclic lateral boundaries along y do not allow calculation of spectra along y

PA0163

run will be terminated because it is running out of job cpu limit remaining time: ... s termination time needed: ... s

PA0164

run will be terminated due to user settings of restart_time / dt_restart new restart time is: ... s

PA0165

re-open of unit 14 is not verified. Please check results!

PA0166

re-opening of file-id ... is not allowed

PA0167

opening file-id ... not allowed for PE ...

PA0168

opening file-id ... is not allowed since it is used otherwise

PA0169

no filename for AVS-data-file found in MRUN-config-file filename in FLD-file set to "unknown"

PA0170 no path for batch_scp on host "..."

PA0171

NetCDF: no 64-bit offset allowed on this machine

PA0172

no OPEN-statement for file-id ...

PA0173

wrong component: ...

PA0174

wrong argument expected: ... given:

PA0175

no time measurement defined on this host

PA0176

negative time interval occured PE ... L=PAUSE "..." new=... last=...

PA0177

negative time interval occured PE ... L=STOP "..." new=... last=... isum=...

PA0178

negative time interval occured PE ... L=STOP "..." sum=... mtime=...

PA0179

unknown modus of time measurement: ...

PA0180

unknown cross-section: ...

PA0181

no output provided for: ...

PA0182

no output available for: ...

PA0183

if humidity/passive_scalar = FALSE output of ... is not provided

PA0184

if cloud_physics = FALSE output of ... is not provided

PA0185

data_output_profiles: normalizing cross ... is not possible since one of the normalizing factors is zero! cross_normx_factor(...,...) = ... cross_normy_factor(...,...) = ...

PA0186

no spectra data available

PA0187

fft method "..." currently does not work on NEC

PA0188

no system-specific fft-call available

PA0189

fft method "..." not available

PA0190

flow_statistics is called two times within one timestep

PA0191

unknown action(s): ...

PA0192

timestep has exceeded the lower limit dt_1d = ... s simulation stopped!

PA0193

unknown initializing problem

PA0194

number of time series quantities exceeds its maximum of dots_max = ... Please increase dots_max in modules.f90.

PA0195

dvrp_username is undefined

PA0196 dvrp_output="..." not allowed

PA0197

dvrp_file="..." not allowed

PA0198

mode_dvrp="..." not allowed

PA0199

split of communicator not realized with MPI1 coupling atmosphere-ocean'

PA0200

missing dz

PA0201

dz=... <= 0.0

PA0202

grid anisotropy exceeds threshold given by only local horizontal reduction of near_wall mixing length l_wall starting from height level k = ... .

PA0203

inconsistent building parameters: bxl=... bxr=... bys=... byn=... nx=... ny=...

PA0204

no street canyon width given

PA0205

inconsistent canyon parameters: cxl=... cxr=... cwx=... ch=... nx=... ny=...

PA0206

inconsistent canyon parameters:... cys=... cyn=... cwy=... ch=... nx=... ny=...

PA0207

inconsistent canyon parameters: street canyon can only be oriented either in x- or in y-direction

PA0208

file TOPOGRAPHY_DATA does not exist

PA0209

errors in file TOPOGRAPHY_DATA

PA0210

nzb_local values are outside the model domain MINVAL( nzb_local ) = ... MAXVAL( nzb_local ) = ...

PA0211

nzb_local does not fulfill cyclic boundary condition in x-direction

PA0212

nzb_local does not fulfill cyclic boundary condition in y-direction

PA0213

max_number_of_particle_groups =... number_of_particle_groups reset to ...

PA0214

version mismatch concerning data from prior run version on file = ... version in program = ...

PA0215

particle group # ... has a density ratio /= 0 but radius = 0

PA0216

number of initial particles (...) exceeds maximum_number_of_particles (...) on PE ...

PA0217

unknown boundary condition bc_par_b = "..."

PA0218

unknown boundary condition bc_par_t = "..."

PA0219

unknown boundary condition bc_par_lr = "..."

PA0220

unknown boundary condition bc_par_ns = "..."

PA0221

number of PEs of the prescribed topology (...) does not match the number of PEs available to the job ()

PA0222

if the processor topology is prescribed by the user, both values of "npex" and "npey" must be given in the NAMELIST-parameter file

PA0223

psolver = "poisfft_hybrid" can only be used in case of a 1d-decomposition along x

PA0224

no matching grid for transpositions found

PA0225

x-direction: gridpoint number (...)is not an integral divisor of the number of procesors (...)

PA0226

x-direction: nx does not match the requirements given by the number of PEs used please use nx = ... instead of nx =...

PA0227

y-direction: gridpoint number (...) is not an integral divisor of the number of processors (...)

PA0228

y-direction: ny does not match the requirements given by the number of PEs used please use ny = ... instead of ny =...

PA0229

1d-decomposition along x chosen but nz restrictions may occur since ups-scheme is activated

PA0230

transposition z --> x: nz=... is not an integral divisior of pdims(1)= ...

PA0231

transposition x --> y: nx+1=... is not an integral divisor of pdims(2)= ...

PA0232

transposition y --> z: ny+1=... is not an integral divisor of pdims(1)=...

PA0233

transposition x --> y: ny+1=... is not an integral divisor of pdims(1)=...

PA0234

direct transposition z --> y (needed for spectra): nz=... is not an integral divisor of pdims(2)=...

PA0235

mg_switch_to_pe0_level out of range and reset to default (=0)

PA0236

not enough memory for storing gathered multigrid data on PE0

PA0237

multigrid gather/scatter impossible in non parallel mode

PA0238

more than 10 multigrid levels

PA0239

The value for "topography_grid_convention" is not set. Its default value is only valid for "topography" = ''single_building'', ''single_street_canyon'' or ''read_from_file'' Choose ''cell_edge'' or ''cell_center''.

PA0240

The value for "topography_grid_convention" is not recognized. Choose ''cell_edge'' or ''cell_center''.

PA0241

netcdf_precision must contain a "_" netcdf_precision(...)="..."

PA0242

illegal netcdf precision: netcdf_precision( ...)="..."

PA0243

unknown variable in inipar assignment: netcdf_precision(', i, ')="..."

PA0244

no grid defined for variable ...

PA0245

NetCDF file for volume data ... from previuos run found, but this file cannot be extended due to variable mismatch. New file is created instead.

PA0246

NetCDF file for volume data ... from previuos run found, but this file cannot be extended due to mismatch in number of vertical grid points (nz_do3d). New file is created instead.

PA0247

NetCDF file for volume data ... from previuos run found, but this file cannot be extended because the current output time is less or equal than the last output time on this file. New file is created instead.

PA0248

NetCDF file for volume data ... from previous run found. This file will be extended.

PA0249

NetCDF file for cross-sections ... from previuos run found, but this file cannot be extended due to variable mismatch. New file is created instead.

PA0250

NetCDF file for cross-sections ... from previuos run found, but this file cannot be extended due to mismatch in number of cross sections. New file is created instead.

PA0251

NetCDF file for cross-sections ... from previuos run found but this file cannot be extended due to mismatch in cross section levels. New file is created instead.

PA0252

NetCDF file for cross sections ... from previuos run found, but this file cannot be extended because the current output time is less or equal than the last output time on this file. New file is created instead.

PA0253

NetCDF file for cross-sections ... from previous run found. This file will be extended.

PA0254

NetCDF file for vertical profiles from previuos run found, but this file cannot be extended due to variable mismatch. New file is created instead.

PA0255

NetCDF file for vertical profiles from previuos run found, but this file cannot be extended because the current output time is less or equal than the last output time on this file. New file is created instead.

PA0256

NetCDF file for vertical profiles from previous run found. This file will be extended.

PA0257

NetCDF file for vertical profiles from previous run found. This file will be extended.

PA0258

NetCDF file for time series from previuos run found, but this file cannot be extended because the current output time is less or equal than the last output time on this file. New file is created instead.

PA0259

NetCDF file for time series from previous run found. This file will be extended.

PA0260

NetCDF file for spectra from previuos run found, but this file cannot be extended due to variable mismatch. New file is created instead.

PA0261

NetCDF file for spectra from previuos run found, but this file cannot be extended due to mismatch in number of vertical levels. New file is created instead.

PA0262

NetCDF file for spectra from previuos run found, but this file cannot be extended due to mismatch in heights of vertical levels. New file is created instead.

PA0263

NetCDF file for spectra from previuos run found, but this file cannot be extended because the current output time is less or equal than the last output time on this file. New file is created instead.

PA0264

NetCDF file for spectra from previous run found. This file will be extended.

PA0265

NetCDF file for particles from previuos run found, but this file cannot be extended because the current output time is less or equal than the last output time on this file. New file is created instead.

PA0266

NetCDF file for particles from previous run found. This file will be extended.

PA0267

NetCDF file for particle time series from previuos run found, but this file cannot be extended due to variable mismatch. New file is created instead.

PA0268

NetCDF file for particle time series from previuos run found, but this file cannot be extended because the current output time is less or equal than the last output time on this file. New file is created instead.

PA0269

NetCDF file for particle time series from previous run found. This file will be extended.

PA0270

mode "..." not supported

PA0271

errors in \$inipar ∨ no \$inipar-namelist found (CRAY-machines only)

PA0272

no \$inipar-namelist found

PA0273

no value or wrong value given for nx: nx=...

PA0274

no value or wrong value given for ny: ny=...

PA0275

no value or wrong value given for nz: nz=...

PA0276

local file ENVPAR not found some variables for steering may not be properly set

PA0277

errors in local file ENVPAR some variables for steering may not be properly set

PA0278

no envpar-NAMELIST found in local file ENVPAR some variables for steering may not be properly set

PA0279

wrong component: ...

PA0280

Number of OpenMP threads = ...

PA0281

running optimized multinode version switch_per_lpar = ... tasks_per_lpar = ... tasks_per_logical_node = ...

PA0282

parallel environment (MPI) required

PA0283

no sufficient convergence within 1000 cycles

PA0284

data from subdomain of previous run mapped more than 1000 times

PA0285

number of PEs or virtual PE-grid changed in restart run PE ... will read from files ...

PA0286

version mismatch concerning data from prior run version on file = "..." version in program = "..."

PA0287

problem with index bound nxl on restart file "..." nxl = ... but it should be = ... from the index bound information array

PA0288

problem with index bound nxr on restart file "..." nxr = ... but it should be = ... from the index bound information array

PA0289

problem with index bound nys on restart file "..." nys = .. but it should be = ... from the index bound information array

PA0290

problem with index bound nyn on restart file "..." nyn = ... but it should be = ... from the index bound information array

PA0291

mismatch between actual data and data from prior run on PE ... nzb on file = ... nzb = ...

PA0292

mismatch between actual data and data from prior run on PE ... nzt on file = ... nzt = ...

PA0293

read_3d_binary: spectrum_x on restart file ignored because total numbers of grid points (nx) do not match

PA0294

read_3d_binary: spectrum_y on restart file ignored because total numbers of grid points (ny) do not match

PA0295

unknown field named "..." found in data from prior run on PE ...

PA0296

version mismatch concerning control variables version on file = "..." version on program = "..."

PA0297

numprocs not found in data from prior run on PE ...

PA0298

hor_index_bounds not found in data from prior run on PE ...

PA0299

nz not found in data from prior run on PE ...

PA0300

max_pr_user not found in data from prior run on PE ...

PA0301

statistic_regions not found in data from prior run on PE ...

PA0302

unknown variable named "..." found in data from prior run on PE ...

PA0303

nz not found in restart data file

PA0304

mismatch concerning number of gridpoints along z nz on file = "..." nz from run = "..."

PA0305

max_pr_user not found in restart data file

PA0306

number of user profiles on restart data file differs from the current run max_pr_user on file = "..." max_pr_user from run = "..."

PA0307

statistic_regions not found in restart data file

PA0308

statistic regions on restart data file differ from the current run statistic regions on file = "..." statistic regions from run = "..." statistic data may be lost!

PA0309

inflow profiles not temporally averaged. Averaging will be done now using ... samples.

PA0310

remote model "..." terminated with terminate_coupled_remote = ... local model "..." has terminate_coupled = ...

PA0311

number of gridpoints along x or/and y contain illegal factors only factors 8,6,5,4,3,2 are allowed

PA0312

Time step has reached minimum limit.
dt = ... s Simulation is terminated.
old_dt = ... s
dt_u = ... s
dt_v = ... s
dt_w = ... s
dt_diff = ... s
u_max = ... m/s k=... j=... i=...
v_max = ... m/s k=... j=... i=...
w_max = ... m/s k=... j=... i=...

PA0313

illegal value for parameter particle_color: ...

PA0314

illegal value for parameter particle_dvrpsize: ...

PA0315

color_interval(2) <= color_interval(1)

PA0316

dvrpsize_interval(2) <= dvrpsize_interval(1)

PA0317

ocean = .F. does not allow coupling_char = ... set by mrun-option "-y"

PA0318

inflow_damping_height must be explicitly specified because the inversion height calculated by the prerun is zero

PA0319

section_xy must be <= nz + 1 = ...

PA0320

section_xz must be <= ny + 1 = ...

PA0321

section_yz must be <= nx + 1 = ...

PA0322 output of q*w*(0) requires humidity=.TRUE.
PA0323
output of averaged quantity "..." requires to set a non-zero averaging interval
PA0324
Applying large scale vertical motion is not allowed for ocean runs
UI0001

unknown location "..."

UI0002

location "..." is not allowed to be called with parameters "i" and "j"

UI0003

no output possible for: ...

UI0004

unknown mode "..."

UI0005

topography "..." not available yet

UI0006

unknown topography "..."

UI0007

canopy_mode "..." not available yet

UI0008

unknown canopy_mode "..."

UI0009

the number of user-defined profiles given in data_output_pr (...) does not match the one found in the restart file (...)

UI0010

Spectra of ... can not be calculated

UI0011

Spectra of ... are not defined

UI0012

unknown variable named "..." found in data from prior run on PE

NC****

**** contains numbers in the range from 1-444

Last change:  $Id: appendix_a.html 411 2009-12-11 14:15:58Z heinze $