List of message identifiers used in PALM message handling routine "message" PA**** Identifier for messages in the PALM standard code UI**** Identifier for messages in "user_" routines message_identifier message string PA0001 "host" is not set. Please check that environment variable "localhost" is set before running PALM PA0002 illegal coupling mode: ... PA0003 dt_coupling is not set but required for coupling mode "..." PA0004 coupling mode "...": dt_coupling = ... is not equal to dt_coupling_remote = ... PA0005 coupling mode "...": dt_coupling <= 0.0 is not allowed and is reset to MAX(dt_max(A,O)) = ... PA0006 coupling mode "...": restart_time = ... is not equal to restart_time_remote = ... PA0007 coupling mode "...": dt_restart = ... is not equal to dt_restart_remote = ... PA0008 coupling mode "...": end_time = ... is not equal to end_time_remote = ... PA0009 coupling mode "...": dx = ... is not equal to dx_remote = ... PA0010 coupling mode "...": dy = ... is not equal to dy_remote = ... PA0011 coupling mode "...": nx = ... is not equal to nx_remote = ... PA0012 coupling mode "...": ny = ... is not equal to ny_remote = ... PA0013 illegal value given for loop_optimization: "..." PA0014 a non-flat topography does not allow ... PA0015 ocean = .T. does not allow ... PA0016 unknown solver for perturbation pressure: psolver = "..." PA0017 psolver = "..." only works for a 1d domain-decomposition along x please do not set npey/=1 in the parameter file' PA0018 psolver = ".." does not work for subdomains with unequal size please set grid_matching = ''strict'' in the parameter file PA0019 psolver = "..." only works for a parallel environment PA0020 unknown multigrid cycle: cycle_mg = "..." PA0021 unknown fft-algorithm: fft_method = "..." PA0022 unknown advection scheme: momentum_advec = "..." PA0023 momentum_advec = "..." is not allowed with timestep_scheme = "..." PA0024 unknown advection scheme: scalar_advec = "..." PA0025 use_upstream_for_tke set .TRUE. because use_sgs_for_particles = .TRUE. PA0026 use_upstream_for_tke = .TRUE. not allowed with timestep_scheme = "..." PA0027 unknown timestep scheme: timestep_scheme = "..." PA0028 scalar advection scheme "..." does not work with timestep_scheme ".." PA0029 momentum advection scheme "..." does not work with timestep_scheme "..." PA0030 initializing_action = "..." unkown or not allowed PA0031 initializing_actions = "set_constant_profiles" and "set_1d-model_profiles" are not allowed simultaneously PA0032 initializing_actions = "set_constant_profiles" and "by_user" are not allowed simultaneously PA0033 initializing_actions = "by_user" and "set_1d-model_profiles" are not allowed simultaneously PA0034 cloud_physics = ... is not allowed with humidity = ... PA0035 precipitation = ... is not allowed with cloud_physics = ... PA0036 humidity = .TRUE. and sloping_surface = .TRUE. are not allowed simultaneously PA0037 UPS-scheme is not implemented for humidity = .TRUE. PA0038 humidity = .TRUE. and passive_scalar = .TRUE. is not allowed simultaneously' PA0039 UPS-scheme is not implemented for passive_scalar = .TRUE. PA0040 illegal value "..." found for parameter grid_matching PA0041 plant_canopy = .TRUE. requires a non-zero drag coefficient given value is drag_coefficient = 0.0 PA0042 use_top_fluxes must be .TRUE. in ocean version PA0043 ABS( alpha_surface = ... ) must be < 90.0 PA0044 dt = ', dt , ' <= 0.0 PA0045 cfl_factor = ... out of range 0.0 < cfl_factor <= 1.0 is required PA0046 baroclinicity (ug) not allowed simultaneously with galilei transformation PA0047 baroclinicity (vg) not allowed simultaneously with galilei transformation PA0048 variable translation speed used for galilei-transformation, which may cause instabilities in stably stratified regions PA0049 unknown boundary condition: bc_lr = "..." PA0050 unknown boundary condition: bc_ns = "..." PA0051 non-cyclic lateral boundaries do not allow psolver = "..." PA0052 non-cyclic lateral boundaries do not allow momentum_advec = "..." PA0053 non-cyclic lateral boundaries do not allow scalar_advec = "..." PA0054 non-cyclic lateral boundaries do not allow galilei_transformation = .T. PA0055 adjust_mixing_length = TRUE and bc_e_b = "neumann" PA0056 adjust_mixing_length = FALSE and bc_e_b = "..." PA0057 boundary condition bc_e_b changed to "..." PA0058 unknown boundary condition: bc_e_b = "..." PA0059 unknown boundary condition: bc_p_b = "..." PA0060 boundary condition: bc_p_b = "..." not allowed with prandtl_layer = .FALSE.' PA0061 unknown boundary condition: bc_p_t = "..." PA0062 unknown boundary condition: bc_pt_b = "..." PA0063 unknown boundary condition: bc_pt_t = "..." PA0064 both, top_momentumflux_u AND top_momentumflux_v must be set PA0065 boundary_condition: bc_pt_b = "..." is not allowed with constant_heatflux = .TRUE. PA0066 constant_heatflux = .TRUE. is not allowed with pt_surface_initial_change (/=0) = ... PA0067 boundary_condition: bc_pt_t = "..." is not allowed with constant_top_heatflux = .TRUE. PA0068 unknown boundary condition: bc_sa_t = "..." PA0069 boundary condition: bc_sa_t = "..." requires to set top_salinityflux PA0070 boundary condition: bc_sa_t = "..." is not allowed with constant_top_salinityflux = .TRUE.' PA0071 unknown boundary condition: bc_..._b ="..." PA0072 unknown boundary condition: bc_..._t ="..." PA0073 boundary condition: bc_..._b = "..." is not allowed with prescribed surface flux PA0074 a prescribed surface flux is not allowed with ..._surface_initial_change (/=0) = ... PA0075 boundary condition: bc_uv_b = "..." is not allowed with prandtl_layer = .TRUE. PA0076 unknown boundary condition: bc_uv_b = "..." PA0077 unknown boundary condition: bc_uv_t = "..." PA0078 rayleigh_damping_factor = ... out of range [0.0,1.0] PA0079 rayleigh_damping_height = ... out of range [0.0, ...] PA0080 overshoot_limit_... < 0.0 is not allowed PA0081 ups_limit_... < 0.0 is not allowed PA0082 number of statistic_regions = ... but only 10 regions are allowed PA0083 normalizing_region = ... must be >= 0 and <= ... (value of statistic_regions) PA0084 dt_sort_particles is reset to 0.0 because of cloud_droplets = .TRUE. PA0085 averaging_interval = ... must be <= dt_data_output = ... PA0086 averaging_interval_pr = ... must be <= dt_dopr = ... PA0087 averaging_interval_sp = ... must be <= dt_dosp = ... PA0088 dt_averaging_input = ... must be <= averaging_interval = ... PA0089 dt_averaging_input_pr = ... must be <= averaging_interval_pr = ... PA0090 precipitation_amount_interval = ... must not be larger than dt_do2d_xy = ... PA0091 data_output_pr = ... is not implemented for ocean = .FALSE.' PA0092 data_output_pr = ... is not implemented for humidity = .FALSE.' PA0093 data_output_pr = ... is not implemented for passive_scalar = .FALSE.' PA0094 data_output_pr = ... is not implemented for cloud_physics = .FALSE.' PA0095 data_output_pr = ... is not implemented for cloud_physics = .FALSE. and humidity = .FALSE. PA0096 data_output_pr = ... is not implemented for cloud_physics = .FALSE. or cloud_droplets = .FALSE. PA0097 illegal value for data_output_pr or data_output_pr_user = "..." PA0098 illegal value for data_output_pr = "..." PA0099 z_max_do1d = ... must be >= ... or <= ... PA0100 unknown normalization method cross_normalized_x = "..." PA0101 unknown normalization method cross_normalized_y = "..." PA0102 number of output quantitities given by data_output and data_output_user exceeds the limit of 100 PA0103 output of "..." requires constant_diffusion = .FALSE. PA0104 output of "..." requires a "particles_par"-NAMELIST in the parameter file (PARIN) PA0105 output of "..." requires humidity = .TRUE. PA0106 output of "" requires cloud_physics = .TRUE. or cloud_droplets = .TRUE.' PA0107 output of "..." requires cloud_droplets = .TRUE. PA0108 output of "..." requires cloud_physics = .TRUE. PA0109 output of "..." requires ocean = .TRUE. PA0110 output of "..." requires passive_scalar = .TRUE. PA0111 illegal value for data_output: "..." only 2d-horizontal cross sections are allowed for this value PA0112 output of "..." requires precipitation = .TRUE. PA0113 temporal averaging of precipitation amount "..." is not possible' PA0114 illegal value for data_output or data_output_user = "..." PA0115 illegal value for data_output = "..." PA0116 z_max_do2d = ', z_max_do2d must be >= ... (zu(nzb+1)) and <= ... (zu(nzt)) PA0117 do3d_compress = .TRUE. not allowed on host "" PA0118 illegal precision: do3d_comp_prec ( ...) = "..." PA0119 unknown variable "..." given for do3d_comp_prec(...) PA0120 unknown value for data_output_format "..." PA0121 km_constant = ... < 0.0 PA0122 prandtl_number = ... < 0.0 PA0123 prandtl_layer is not allowed with fixed value of km PA0124 outflow_damping width out of range PA0125 rif_min = ... must be less than rif_max = ... PA0126 disturbance_level_b = ... must be >= ... (zu(3)) PA0127 disturbance_level_b = ... must be <= ... (zu(nzt-2)) PA0128 disturbance_level_t = ... must be <= ... (zu(nzt-2)) PA0129 disturbance_level_t = ... must be >= disturbance_level_b = ... PA0130 disturbance_level_ind_t =... must be >= disturbance_level_b = ... PA0131 inflow_disturbance_begin out of range PA0132 inflow_disturbance_end out of range PA0133 turbulent_inflow = .T. requires a Dirichlet condition at the inflow boundary PA0134 illegal value for recycling_width: ... PA0135 unknown random generator: random_generator = "..." PA0136 damp_level_1d = ... must be > 0.0 and < ... (zu(nzt+1)) PA0137 mixing_length_1d = "..." is unknown PA0138 dissipation_1d = "..." is unknown PA0139 termination_time_needed = ... must be > 30.0 on host ..." PA0140 termination_time_needed = ... should be >= 300.0 on host "..." PA0141 coupling requires PALM to be called with ''mrun -K parallel'' PA0142 absolute temperature < 0.0 at zu(...) = ... PA0143 k=... j=... i=... ql_c=... part(...)%wf=... delta_r=... PA0144 #1 k=... j=... i=... e_s=... e_a=... t_int=... d_radius=... delta_r=... particle_radius=... PA0145 collision_efficiency out of range: ... PA0146 maximum_number_of_particles needs to be increased but this is not allowed with NetCDF output switched on PA0147 maximum_number_of_tails needs to be increased but this is not allowed with NetCDF output switched on PA0148 particle too fast. n = ... PA0149 particle out of range: i=... j=... k=... nxl=... nxr=... nys=... nyn=... nzb=... nzt=... PA0150 Both dp_external and conserve_volume_flow are .TRUE. but one of them must be .FALSE. PA0151 dp_level_b = ... is out of range PA0152 dp_external is .TRUE. but dpdxy is zero, i.e. the external pressure gradient will not be applied PA0153 dpdxy is nonzero but dp_external is .FALSE., i.e. the external pressure gradient will not be applied PA0154 unknown conserve_volume_flow_mode: ... PA0155 noncyclic boundary conditions require conserve_volume_flow_mode = ''inflow_profile'' PA0156 cyclic boundary conditions require conserve_volume_flow_mode = ''initial_profiles'' or ''bulk_velocity'' requires noncyclic boundary conditions PA0157 nonzero bulk velocity requires conserve_volume_flow = .T. and conserve_volume_flow_mode = ''bulk_velocity'' PA0158 no vertical boundary condition for variable "..." PA0159 no term for component "..." PA0160 non-cyclic lateral boundaries along x do not allow calculation of spectra along x PA0161 sorry, calculation of spectra in non parallel mode is still not realized PA0162 non-cyclic lateral boundaries along y do not allow calculation of spectra along y PA0163 run will be terminated because it is running out of job cpu limit remaining time: ... s termination time needed: ... s PA0164 run will be terminated due to user settings of restart_time / dt_restart new restart time is: ... s PA0165 re-open of unit 14 is not verified. Please check results! PA0166 re-opening of file-id ... is not allowed PA0167 opening file-id ... not allowed for PE ... PA0168 opening file-id ... is not allowed since it is used otherwise PA0169 no filename for AVS-data-file found in MRUN-config-file filename in FLD-file set to "unknown" PA0170 no path for batch_scp on host "..." PA0171 NetCDF: no 64-bit offset allowed on this machine PA0172 no OPEN-statement for file-id ... PA0173 wrong component: ... PA0174 wrong argument expected: ... given: ... PA0175 no time measurement defined on this host PA0176 negative time interval occured PE ... L=PAUSE "..." new=... last=... PA0177 negative time interval occured PE ... L=STOP "..." new=... last=... isum=... PA0178 negative time interval occured PE ... L=STOP "..." sum=... mtime=... PA0179 unknown modus of time measurement: ... PA0180 unknown cross-section: ... PA0181 no output provided for: ... PA0182 no output available for: ... PA0183 if humidity/passive_scalar = FALSE output of ... is not provided PA0184 if cloud_physics = FALSE output of ... is not provided PA0185 data_output_profiles: normalizing cross ... is not possible since one of the normalizing factors is zero! cross_normx_factor(...,...) = ... cross_normy_factor(...,...) = ... PA0186 no spectra data available PA0187 fft method "..." currently does not work on NEC PA0188 no system-specific fft-call available PA0189 fft method "..." not available PA0190 flow_statistics is called two times within one timestep PA0191 unknown action(s): ... PA0192 timestep has exceeded the lower limit dt_1d = ... s simulation stopped! PA0193 unknown initializing problem PA0194 number of time series quantities exceeds its maximum of dots_max = ... Please increase dots_max in modules.f90. PA0195 dvrp_username is undefined PA0196 dvrp_output="..." not allowed PA0197 dvrp_file="..." not allowed PA0198 mode_dvrp="..." not allowed PA0199 split of communicator not realized with MPI1 coupling atmosphere-ocean' PA0200 missing dz PA0201 dz=... <= 0.0 PA0202 grid anisotropy exceeds threshold given by only local horizontal reduction of near_wall mixing length l_wall starting from height level k = ... . PA0203 inconsistent building parameters: bxl=... bxr=... bys=... byn=... nx=... ny=... PA0204 no street canyon width given PA0205 inconsistent canyon parameters: cxl=... cxr=... cwx=... ch=... nx=... ny=... PA0206 inconsistent canyon parameters:... cys=... cyn=... cwy=... ch=... nx=... ny=... PA0207 inconsistent canyon parameters: street canyon can only be oriented either in x- or in y-direction PA0208 file TOPOGRAPHY_DATA does not exist PA0209 errors in file TOPOGRAPHY_DATA PA0210 nzb_local values are outside the model domain MINVAL( nzb_local ) = ... MAXVAL( nzb_local ) = ... PA0211 nzb_local does not fulfill cyclic boundary condition in x-direction PA0212 nzb_local does not fulfill cyclic boundary condition in y-direction PA0213 max_number_of_particle_groups =... number_of_particle_groups reset to ... PA0214 version mismatch concerning data from prior run version on file = ... version in program = ... PA0215 particle group # ... has a density ratio /= 0 but radius = 0 PA0216 number of initial particles (...) exceeds maximum_number_of_particles (...) on PE ... PA0217 unknown boundary condition bc_par_b = "..." PA0218 unknown boundary condition bc_par_t = "..." PA0219 unknown boundary condition bc_par_lr = "..." PA0220 unknown boundary condition bc_par_ns = "..." PA0221 number of PEs of the prescribed topology (...) does not match the number of PEs available to the job () PA0222 if the processor topology is prescribed by the user, both values of "npex" and "npey" must be given in the NAMELIST-parameter file PA0223 psolver = "poisfft_hybrid" can only be used in case of a 1d-decomposition along x PA0224 no matching grid for transpositions found PA0225 x-direction: gridpoint number (...)is not an integral divisor of the number of procesors (...) PA0226 x-direction: nx does not match the requirements given by the number of PEs used please use nx = ... instead of nx =... PA0227 y-direction: gridpoint number (...) is not an integral divisor of the number of processors (...) PA0228 y-direction: ny does not match the requirements given by the number of PEs used please use ny = ... instead of ny =... PA0229 1d-decomposition along x chosen but nz restrictions may occur since ups-scheme is activated PA0230 transposition z --> x: nz=... is not an integral divisior of pdims(1)= ... PA0231 transposition x --> y: nx+1=... is not an integral divisor of pdims(2)= ... PA0232 transposition y --> z: ny+1=... is not an integral divisor of pdims(1)=... PA0233 transposition x --> y: ny+1=... is not an integral divisor of pdims(1)=... PA0234 direct transposition z --> y (needed for spectra): nz=... is not an integral divisor of pdims(2)=... PA0235 mg_switch_to_pe0_level out of range and reset to default (=0) PA0236 not enough memory for storing gathered multigrid data on PE0 PA0237 multigrid gather/scatter impossible in non parallel mode PA0238 more than 10 multigrid levels PA0239 The value for "topography_grid_convention" is not set. Its default value is only valid for "topography" = ''single_building'', ''single_street_canyon'' or ''read_from_file'' Choose ''cell_edge'' or ''cell_center''. PA0240 The value for "topography_grid_convention" is not recognized. Choose ''cell_edge'' or ''cell_center''. PA0241 netcdf_precision must contain a "_" netcdf_precision(...)="..." PA0242 illegal netcdf precision: netcdf_precision( ...)="..." PA0243 unknown variable in inipar assignment: netcdf_precision(', i, ')="..." PA0244 no grid defined for variable ... PA0245 NetCDF file for volume data ... from previuos run found, but this file cannot be extended due to variable mismatch. New file is created instead. PA0246 NetCDF file for volume data ... from previuos run found, but this file cannot be extended due to mismatch in number of vertical grid points (nz_do3d). New file is created instead. PA0247 NetCDF file for volume data ... from previuos run found, but this file cannot be extended because the current output time is less or equal than the last output time on this file. New file is created instead. PA0248 NetCDF file for volume data ... from previous run found. This file will be extended. PA0249 NetCDF file for cross-sections ... from previuos run found, but this file cannot be extended due to variable mismatch. New file is created instead. PA0250 NetCDF file for cross-sections ... from previuos run found, but this file cannot be extended due to mismatch in number of cross sections. New file is created instead. PA0251 NetCDF file for cross-sections ... from previuos run found but this file cannot be extended due to mismatch in cross section levels. New file is created instead. PA0252 NetCDF file for cross sections ... from previuos run found, but this file cannot be extended because the current output time is less or equal than the last output time on this file. New file is created instead. PA0253 NetCDF file for cross-sections ... from previous run found. This file will be extended. PA0254 NetCDF file for vertical profiles from previuos run found, but this file cannot be extended due to variable mismatch. New file is created instead. PA0255 NetCDF file for vertical profiles from previuos run found, but this file cannot be extended because the current output time is less or equal than the last output time on this file. New file is created instead. PA0256 NetCDF file for vertical profiles from previous run found. This file will be extended. PA0257 NetCDF file for time series from previuos run found but this file cannot be extended due tovariable mismatch. New file is created instead. PA0258 NetCDF file for time series from previuos run found, but this file cannot be extended because the current output time is less or equal than the last output time on this file. New file is created instead. PA0259 NetCDF file for time series from previous run found. This file will be extended. PA0260 NetCDF file for spectra from previuos run found, but this file cannot be extended due to variable mismatch. New file is created instead. PA0261 NetCDF file for spectra from previuos run found, but this file cannot be extended due to mismatch in number of vertical levels. New file is created instead. PA0262 NetCDF file for spectra from previuos run found, but this file cannot be extended due to mismatch in heights of vertical levels. New file is created instead. PA0263 NetCDF file for spectra from previuos run found, but this file cannot be extended because the current output time is less or equal than the last output time on this file. New file is created instead. PA0264 NetCDF file for spectra from previous run found. This file will be extended. PA0265 NetCDF file for particles from previuos run found, but this file cannot be extended because the current output time is less or equal than the last output time on this file. New file is created instead. PA0266 NetCDF file for particles from previous run found. This file will be extended. PA0267 NetCDF file for particle time series from previuos run found, but this file cannot be extended due to variable mismatch. New file is created instead. PA0268 NetCDF file for particle time series from previuos run found, but this file cannot be extended because the current output time is less or equal than the last output time on this file. New file is created instead. PA0269 NetCDF file for particle time series from previous run found. This file will be extended. PA0270 mode "..." not supported PA0271 errors in \$inipar &or no \$inipar-namelist found (CRAY-machines only) PA0272 no \$inipar-namelist found PA0273 no value or wrong value given for nx: nx=... PA0274 no value or wrong value given for ny: ny=... PA0275 no value or wrong value given for nz: nz=... PA0276 local file ENVPAR not found some variables for steering may not be properly set PA0277 errors in local file ENVPAR some variables for steering may not be properly set PA0278 no envpar-NAMELIST found in local file ENVPAR some variables for steering may not be properly set PA0279 wrong component: ... PA0280 Number of OpenMP threads = ... PA0281 running optimized multinode version switch_per_lpar = ... tasks_per_lpar = ... tasks_per_logical_node = ... PA0282 parallel environment (MPI) required PA0283 no sufficient convergence within 1000 cycles PA0284 data from subdomain of previous run mapped more than 1000 times PA0285 number of PEs or virtual PE-grid changed in restart run PE ... will read from files ... PA0286 version mismatch concerning data from prior run version on file = "..." version in program = "..." PA0287 problem with index bound nxl on restart file "..." nxl = ... but it should be = ... from the index bound information array PA0288 problem with index bound nxr on restart file "..." nxr = ... but it should be = ... from the index bound information array PA0289 problem with index bound nys on restart file "..." nys = .. but it should be = ... from the index bound information array PA0290 problem with index bound nyn on restart file "..." nyn = ... but it should be = ... from the index bound information array PA0291 mismatch between actual data and data from prior run on PE ... nzb on file = ... nzb = ... PA0292 mismatch between actual data and data from prior run on PE ... nzt on file = ... nzt = ... PA0293 read_3d_binary: spectrum_x on restart file ignored because total numbers of grid points (nx) do not match PA0294 read_3d_binary: spectrum_y on restart file ignored because total numbers of grid points (ny) do not match PA0295 unknown field named "..." found in data from prior run on PE ... PA0296 version mismatch concerning control variables version on file = "..." version on program = "..." PA0297 numprocs not found in data from prior run on PE ... PA0298 hor_index_bounds not found in data from prior run on PE ... PA0299 nz not found in data from prior run on PE ... PA0300 max_pr_user not found in data from prior run on PE ... PA0301 statistic_regions not found in data from prior run on PE ... PA0302 unknown variable named "..." found in data from prior run on PE ... PA0303 nz not found in restart data file PA0304 mismatch concerning number of gridpoints along z nz on file = "..." nz from run = "..." PA0305 max_pr_user not found in restart data file PA0306 number of user profiles on restart data file differs from the current run max_pr_user on file = "..." max_pr_user from run = "..." PA0307 statistic_regions not found in restart data file PA0308 statistic regions on restart data file differ from the current run statistic regions on file = "..." statistic regions from run = "..." statistic data may be lost! PA0309 inflow profiles not temporally averaged. Averaging will be done now using ... samples.