List of message identifiers used in PALM message handling routine "message"
PA**** Identifier for messages in the PALM standard code
UI**** Identifier for messages in "user_" routines
message_identifier message string
PA0001 "host" is not set. Please check that environment
variable "localhost" is set before running PALM
PA0002 illegal coupling mode: ...
PA0003 dt_coupling is not set but required for coupling
mode "..."
PA0004 coupling mode "...": dt_coupling = ... is not equal
to dt_coupling_remote = ...
PA0005 coupling mode "...": dt_coupling <= 0.0 is not allowed
and is reset to MAX(dt_max(A,O)) = ...
PA0006 coupling mode "...": restart_time = ... is not equal
to restart_time_remote = ...
PA0007 coupling mode "...": dt_restart = ... is not equal
to dt_restart_remote = ...
PA0008 coupling mode "...": end_time = ... is not equal to
end_time_remote = ...
PA0009 coupling mode "...": dx = ... is not equal to
dx_remote = ...
PA0010 coupling mode "...": dy = ... is not equal to
dy_remote = ...
PA0011 coupling mode "...": nx = ... is not equal to
nx_remote = ...
PA0012 coupling mode "...": ny = ... is not equal to
ny_remote = ...
PA0013 illegal value given for loop_optimization: "..."
PA0014 a non-flat topography does not allow ...
PA0015 ocean = .T. does not allow ...
PA0016 unknown solver for perturbation pressure:
psolver = "..."
PA0017 psolver = "..." only works for a
1d domain-decomposition along x
please do not set npey/=1 in the parameter file'
PA0018 psolver = ".." does not work for subdomains with
unequal size please set grid_matching = ''strict''
in the parameter file
PA0019 psolver = "..." only works for a parallel environment
PA0020 unknown multigrid cycle: cycle_mg = "..."
PA0021 unknown fft-algorithm: fft_method = "..."
PA0022 unknown advection scheme: momentum_advec = "..."
PA0023 momentum_advec = "..." is not allowed with
timestep_scheme = "..."
PA0024 unknown advection scheme: scalar_advec = "..."
PA0025 use_upstream_for_tke set .TRUE. because
use_sgs_for_particles = .TRUE.
PA0026 use_upstream_for_tke = .TRUE. not allowed with
timestep_scheme = "..."
PA0027 unknown timestep scheme: timestep_scheme = "..."
PA0028 scalar advection scheme "..." does not work with
timestep_scheme ".."
PA0029 momentum advection scheme "..." does not work with
timestep_scheme "..."
PA0030 initializing_action = "..." unkown or not allowed
PA0031 initializing_actions = "set_constant_profiles" and
"set_1d-model_profiles" are not allowed simultaneously
PA0032 initializing_actions = "set_constant_profiles" and
"by_user" are not allowed simultaneously
PA0033 initializing_actions = "by_user" and
"set_1d-model_profiles" are not allowed simultaneously
PA0034 cloud_physics = ... is not allowed with humidity = ...
PA0035 precipitation = ... is not allowed with
cloud_physics = ...
PA0036 humidity = .TRUE. and sloping_surface = .TRUE. are not
allowed simultaneously
PA0037 UPS-scheme is not implemented for humidity = .TRUE.
PA0038 humidity = .TRUE. and passive_scalar = .TRUE. is not
allowed simultaneously'
PA0039 UPS-scheme is not implemented for passive_scalar = .TRUE.
PA0040 illegal value "..." found for parameter grid_matching
PA0041 plant_canopy = .TRUE. requires a non-zero
drag coefficient given value is drag_coefficient = 0.0
PA0042 use_top_fluxes must be .TRUE. in ocean version
PA0043 ABS( alpha_surface = ... ) must be < 90.0
PA0044 dt = ', dt , ' <= 0.0
PA0045 cfl_factor = ... out of range
0.0 < cfl_factor <= 1.0 is required
PA0046 baroclinicity (ug) not allowed simultaneously with
galilei transformation
PA0047 baroclinicity (vg) not allowed simultaneously with
galilei transformation
PA0048 variable translation speed used for
galilei-transformation, which may cause instabilities
in stably stratified regions
PA0049 unknown boundary condition: bc_lr = "..."
PA0050 unknown boundary condition: bc_ns = "..."
PA0051 non-cyclic lateral boundaries do not
allow psolver = "..."
PA0052 non-cyclic lateral boundaries do not allow
momentum_advec = "..."
PA0053 non-cyclic lateral boundaries do not allow
scalar_advec = "..."
PA0054 non-cyclic lateral boundaries do not allow
galilei_transformation = .T.
PA0055 adjust_mixing_length = TRUE and bc_e_b = "neumann"
PA0056 adjust_mixing_length = FALSE and bc_e_b = "..."
PA0057 boundary condition bc_e_b changed to "..."
PA0058 unknown boundary condition: bc_e_b = "..."
PA0059 unknown boundary condition: bc_p_b = "..."
PA0060 boundary condition: bc_p_b = "..." not allowed with
prandtl_layer = .FALSE.'
PA0061 unknown boundary condition: bc_p_t = "..."
PA0062 unknown boundary condition: bc_pt_b = "..."
PA0063 unknown boundary condition: bc_pt_t = "..."
PA0064 both, top_momentumflux_u AND top_momentumflux_v
must be set
PA0065 boundary_condition: bc_pt_b = "..." is not allowed
with constant_heatflux = .TRUE.
PA0066 constant_heatflux = .TRUE. is not allowed with
pt_surface_initial_change (/=0) = ...
PA0067 boundary_condition: bc_pt_t = "..." is not allowed
with constant_top_heatflux = .TRUE.
PA0068 unknown boundary condition: bc_sa_t = "..."
PA0069 boundary condition: bc_sa_t = "..." requires to set
top_salinityflux
PA0070 boundary condition: bc_sa_t = "..." is not allowed
with constant_top_salinityflux = .TRUE.'
PA0071 unknown boundary condition: bc_..._b ="..."
PA0072 unknown boundary condition: bc_..._t ="..."
PA0073 boundary condition: bc_..._b = "..." is not allowed
with prescribed surface flux
PA0074 a prescribed surface flux is not allowed
with ..._surface_initial_change (/=0) = ...
PA0075 boundary condition: bc_uv_b = "..." is not allowed
with prandtl_layer = .TRUE.
PA0076 unknown boundary condition: bc_uv_b = "..."
PA0077 unknown boundary condition: bc_uv_t = "..."
PA0078 rayleigh_damping_factor = ... out of range [0.0,1.0]
PA0079 rayleigh_damping_height = ... out of range [0.0, ...]
PA0080 overshoot_limit_... < 0.0 is not allowed
PA0081 ups_limit_... < 0.0 is not allowed
PA0082 number of statistic_regions = ... but only
10 regions are allowed
PA0083 normalizing_region = ... must be >= 0 and <= ... (value
of statistic_regions)
PA0084 dt_sort_particles is reset to 0.0 because of
cloud_droplets = .TRUE.
PA0085 averaging_interval = ... must be <= dt_data_output = ...
PA0086 averaging_interval_pr = ... must be <= dt_dopr = ...
PA0087 averaging_interval_sp = ... must be <= dt_dosp = ...
PA0088 dt_averaging_input = ... must
be <= averaging_interval = ...
PA0089 dt_averaging_input_pr = ... must be
<= averaging_interval_pr = ...
PA0090 precipitation_amount_interval = ... must not be
larger than dt_do2d_xy = ...
PA0091 data_output_pr = ... is not implemented for
ocean = .FALSE.'
PA0092 data_output_pr = ... is not implemented for
humidity = .FALSE.'
PA0093 data_output_pr = ... is not implemented for
passive_scalar = .FALSE.'
PA0094 data_output_pr = ... is not implemented for
cloud_physics = .FALSE.'
PA0095 data_output_pr = ... is not implemented for
cloud_physics = .FALSE. and humidity = .FALSE.
PA0096 data_output_pr = ... is not implemented for
cloud_physics = .FALSE. or cloud_droplets = .FALSE.
PA0097 illegal value for data_output_pr or
data_output_pr_user = "..."
PA0098 illegal value for data_output_pr = "..."
PA0099 z_max_do1d = ... must be >= ... or <= ...
PA0100 unknown normalization method cross_normalized_x = "..."
PA0101 unknown normalization method cross_normalized_y = "..."
PA0102 number of output quantitities given by data_output
and data_output_user exceeds the limit of 100
PA0103 output of "..." requires constant_diffusion = .FALSE.
PA0104 output of "..." requires a "particles_par"-NAMELIST
in the parameter file (PARIN)
PA0105 output of "..." requires humidity = .TRUE.
PA0106 output of "" requires cloud_physics = .TRUE. or
cloud_droplets = .TRUE.'
PA0107 output of "..." requires cloud_droplets = .TRUE.
PA0108 output of "..." requires cloud_physics = .TRUE.
PA0109 output of "..." requires ocean = .TRUE.
PA0110 output of "..." requires passive_scalar = .TRUE.
PA0111 illegal value for data_output: "..." only
2d-horizontal cross sections are allowed for this value
PA0112 output of "..." requires precipitation = .TRUE.
PA0113 temporal averaging of precipitation amount "..."
is not possible'
PA0114 illegal value for data_output or data_output_user = "..."
PA0115 illegal value for data_output = "..."
PA0116 z_max_do2d = ', z_max_do2d must be >= ... (zu(nzb+1))
and <= ... (zu(nzt))
PA0117 do3d_compress = .TRUE. not allowed on host ""
PA0118 illegal precision: do3d_comp_prec ( ...) = "..."
PA0119 unknown variable "..." given for do3d_comp_prec(...)
PA0120 unknown value for data_output_format "..."
PA0121 km_constant = ... < 0.0
PA0122 prandtl_number = ... < 0.0
PA0123 prandtl_layer is not allowed with fixed value of km
PA0124 outflow_damping width out of range
PA0125 rif_min = ... must be less than rif_max = ...
PA0126 disturbance_level_b = ... must be >= ... (zu(3))
PA0127 disturbance_level_b = ... must be <= ... (zu(nzt-2))
PA0128 disturbance_level_t = ... must be <= ... (zu(nzt-2))
PA0129 disturbance_level_t = ... must
be >= disturbance_level_b = ...
PA0130 disturbance_level_ind_t =... must
be >= disturbance_level_b = ...
PA0131 inflow_disturbance_begin out of range
PA0132 inflow_disturbance_end out of range
PA0133 turbulent_inflow = .T. requires a Dirichlet
condition at the inflow boundary
PA0134 illegal value for recycling_width: ...
PA0135 unknown random generator: random_generator = "..."
PA0136 damp_level_1d = ... must be > 0.0 and < ... (zu(nzt+1))
PA0137 mixing_length_1d = "..." is unknown
PA0138 dissipation_1d = "..." is unknown
PA0139 termination_time_needed = ... must be > 30.0 on host ..."
PA0140 termination_time_needed = ... should be >= 300.0
on host "..."
PA0141 coupling requires PALM to be called with
''mrun -K parallel''
PA0142 absolute temperature < 0.0 at zu(...) = ...
PA0143 k=... j=... i=... ql_c=... part(...)%wf=...
delta_r=...
PA0144 #1 k=... j=... i=... e_s=... e_a=... t_int=...
d_radius=... delta_r=... particle_radius=...
PA0145 collision_efficiency out of range: ...
PA0146 maximum_number_of_particles needs to be increased
but this is not allowed with NetCDF output switched on
PA0147 maximum_number_of_tails needs to be increased
but this is not allowed with NetCDF output switched on
PA0148 particle too fast. n = ...
PA0149 particle out of range: i=... j=... k=...
nxl=... nxr=... nys=... nyn=... nzb=... nzt=...
PA0150 Both dp_external and conserve_volume_flow are .TRUE.
but one of them must be .FALSE.
PA0151 dp_level_b = ... is out of range
PA0152 dp_external is .TRUE. but dpdxy is zero, i.e. the external
pressure gradient will not be applied
PA0153 dpdxy is nonzero but dp_external is .FALSE., i.e. the
external pressure gradient will not be applied
PA0154 unknown conserve_volume_flow_mode: ...
PA0155 noncyclic boundary conditions require
conserve_volume_flow_mode = ''inflow_profile''
PA0156 cyclic boundary conditions require conserve_volume_flow_mode =
''initial_profiles'' or ''bulk_velocity''
requires noncyclic boundary conditions
PA0157 nonzero bulk velocity requires conserve_volume_flow = .T. and
conserve_volume_flow_mode = ''bulk_velocity''
PA0158 no vertical boundary condition for variable "..."
PA0159 no term for component "..."
PA0160 non-cyclic lateral boundaries along x do not allow
calculation of spectra along x
PA0161 sorry, calculation of spectra in non parallel mode is
still not realized
PA0162 non-cyclic lateral boundaries along y do not allow
calculation of spectra along y
PA0163 run will be terminated because it is running out of
job cpu limit remaining time: ... s
termination time needed: ... s
PA0164 run will be terminated due to user settings of
restart_time / dt_restart new restart time is: ... s
PA0165 re-open of unit 14 is not verified. Please check results!
PA0166 re-opening of file-id ... is not allowed
PA0167 opening file-id ... not allowed for PE ...
PA0168 opening file-id ... is not allowed since it is used otherwise
PA0169 no filename for AVS-data-file found in MRUN-config-file
filename in FLD-file set to "unknown"
PA0170 no path for batch_scp on host "..."
PA0171 NetCDF: no 64-bit offset allowed on this machine
PA0172 no OPEN-statement for file-id ...
UI0001 The value for "topography_grid_convention" is not set.
Its default value is only valid for
"topography" = ''single_building'',
''single_street_canyon'' or ''read_from_file''
Choose ''cell_edge'' or ''cell_center''.
UI0002 The value for "topography_grid_convention" is not
recognized. Choose ''cell_edge'' or ''cell_center''.