Index: palm/trunk/TESTS/cases/openacc_test/MONITORING/openacc_test_rc
===================================================================
--- palm/trunk/TESTS/cases/openacc_test/MONITORING/openacc_test_rc	(revision 4327)
+++ 	(revision )
@@ -1,187 +1,0 @@
-
- ******************************    --------------------------------------------
- * PALM 6.0  Rev: 4325M       *    atmosphere - run without 1D - prerun
- ******************************    --------------------------------------------
-
- Date:               2019-12-06    Run:       openacc_test__pgi_mpi_only__2     
- Time:                 11:21:18    Run-No.:   00
- Run on host:        pgi_mpi_on
- Number of PEs:               2    Processor grid (x,y): (   1,   2) calculated
-                                   A 1d-decomposition along y is used
- ------------------------------------------------------------------------------
-
- Numerical Schemes:
- -----------------
-
- --> Use the Moeng_Wyngaard turbulence closure (LES mode).
- --> Use the boussinesq approximation for the model equations.
- --> Solve perturbation pressure via FFT using temperton-algorithm routines
-     perturbation pressure is calculated at every Runge-Kutta step
- --> Momentum advection via Wicker-Skamarock-Scheme 5th order
- --> Scalar advection via Wicker-Skamarock-Scheme 5th order
- --> Loop optimization method: vector
- --> Time differencing scheme: runge-kutta-3       
- ------------------------------------------------------------------------------
-
-
- Run time and time step information:
- ----------------------------------
-
- Timestep:             variable     maximum value: 20.000 s    CFL-factor: 0.90
- Start time:              0.000 s
- End time:               60.000 s
-
-
- Computational grid and domain size:
- ----------------------------------
-
- Grid length:      dx =      50.000 m    dy =      50.000 m
-                dz(1) =      50.000 m
-                dz(2) =     999.000 m
-
- Domain size:       x =   2000.000 m     y =   2000.000 m  z(u) =   2862.511 m
-
- Vertical stretching starts at height:    1225.0 m,
- Vertical stretching starts at index:           25,
- Vertical stretching ends at height:   9999999.9 m,
- Vertical stretching ends at index:             41,
- Factor used for stretching:                 1.080,
-
- Number of gridpoints (x,y,z):  (0:  39, 0:  39, 0:  41)
- Subdomain size (x,y,z):        (    40,     20,     42)
-
-
-    Characteristic levels of the geo. wind component ug:
-
-       Height:         0.0     0.0  m
-       ug:            0.00    0.00  m/s
-       Gradient:    ------    0.00  1/100s
-       Gridpoint:        0       0
-
-    Characteristic levels of the geo. wind component vg:
-
-       Height:         0.0     0.0  m
-       vg:            0.00    0.00  m/s
-       Gradient:    ------    0.00  1/100s
-       Gridpoint:        0       0
-
-
- Topography information:
- ----------------------
-
- Topography: flat                                    
-
-
- Boundary conditions:
- -------------------
-
-                     p                    uv                                  pt
-
- B. bound.: p(0)     = p(1)   | uv(0)     = -uv(1)                | pt(0)     = pt(1)            
- T. bound.: p(nzt+1) = 0      | uv(nzt+1) = ug(nzt+1), vg(nzt+1)  | pt(nzt+1) = pt(nzt) + dpt/dz_
-
-                     e
-
- B. bound.: e(0)     = e(1)                                                                      
- T. bound.: e(nzt+1) = e(nzt) = e(nzt-1)                                                         
-
- Bottom surface fluxes are used in diffusion terms at k=1
-       Predefined constant heatflux:    0.100000 K m/s
-
-
-    Constant flux layer between bottom surface and first computational u,v-level:
-
-       z_mo =  25.00 m   z0 = 0.1000 m   z0h = 0.10000 m   kappa = 0.40
-       Rif value range:     -20.00 <= rif <= 20.00
-
-
- Lateral boundaries:
-       left/right:  cyclic              
-       north/south: cyclic              
-
-
- Initial profiles:
- ----------------
-
-    Characteristic levels of the initial temperature profile:
-
-       Height:           0.0     0.0   800.0  m
-       Temperature:   300.00  300.00  300.00  K
-       Gradient:      ------    0.00    1.00  K/100m
-       Gridpoint:          0       0      16
-
-
- List output:
- -----------
-
-    1D-Profiles:
-       Output every             9999999.90 s
-
-
- Data output:
- -----------
-
-
-    Time series:
-       Output format: netCDF 64bit offset                     
-
-       Output every                 0.00 s
-
- ------------------------------------------------------------------------------
-
-
- Physical quantities:
- -------------------
-
-    Geograph. latitude  :   latitude  =  55.0 degr
-    Geograph. longitude :   longitude =   0.0 degr
-    Rotation angle      :   rotation_angle =   0.0 degr
-    Angular velocity    :   omega  = 0.729E-04 rad/s
-    Coriolis parameter  :   f      =  0.000119 1/s
-                            f*     =  0.000084 1/s
-
-    Date and time at model start : 2019-06-21 12:00:00 +00
-
-    Gravity             :   g      =  9.8 m/s**2
-
-    Reference state used in buoyancy terms: initial_profile
-
-
- Cloud physics quantities / methods:
- ----------------------------------
-
-
-
- LES / Turbulence quantities:
- ---------------------------
-
-    Mixing length is limited to 1.80 * z
-
-
- Actions during the simulation:
- -----------------------------
-
-    Disturbance impulse (u,v) every :   150.00 s
-    Disturbance amplitude           :     0.25 m/s
-    Lower disturbance level         :   125.00 m (GP    3)
-    Upper disturbance level         :   625.00 m (GP   13)
-    Disturbances cease as soon as the disturbance energy exceeds 0.010 m**2/s**2
-    Random number generator used    : random-parallel
-
-
-
- *** dynamic module disabled
-
- ------------------------------------------------------------------------------
-
-
-
-Run-control output:
-------------------
-
-RUN  ITER. HH:MM:SS.SS    DT(E)     UMAX     VMAX     WMAX     U*    W*      THETA*     Z_I     ENERG.   DISTENERG    DIVOLD     DIVNEW     UMAX(KJI)    VMAX(KJI)    WMAX(KJI)   ADVECX   ADVECY   MGCYC
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-  0      0 00:00:00.00  20.0000A  -0.2131D -0.2288D  0.1182  0.000  1.38   0.000E+00    800.  0.104E-02  0.103E-02  0.597E-03  0.867E-13    7   7  11   11   7  19    5  26   7    0.000    0.000       0
-  0      1 00:00:20.00  20.0000D  -0.2125  -0.2273   0.1172  0.009  0.69  -0.134E+02    100.  0.103E-02  0.102E-02  0.569E-05  0.411E-15    7   7  11   11   7  19    5  26   7    0.000    0.000       0
-  0      2 00:00:40.00  20.0000D  -0.2117  -0.2252   0.1162  0.009  0.69  -0.135E+02    100.  0.102E-02  0.102E-02  0.934E-05  0.416E-15    7   7  11   11   7  19    5  26   7    0.000    0.000       0
-  0      3 00:01:00.00  20.0000D  -0.2106  -0.2227   0.1152  0.009  0.69  -0.137E+02    100.  0.101E-02  0.101E-02  0.130E-04  0.421E-15    7   7  11   11   7  19    5  26   7    0.000    0.000       0
Index: palm/trunk/TESTS/cases/openacc_test/MONITORING/openacc_test_rc.000
===================================================================
--- palm/trunk/TESTS/cases/openacc_test/MONITORING/openacc_test_rc.000	(revision 4446)
+++ palm/trunk/TESTS/cases/openacc_test/MONITORING/openacc_test_rc.000	(revision 4446)
@@ -0,0 +1,187 @@
+
+ ******************************    --------------------------------------------
+ * PALM 6.0  Rev: 4325M       *    atmosphere - run without 1D - prerun
+ ******************************    --------------------------------------------
+
+ Date:               2019-12-06    Run:       openacc_test__pgi_mpi_only__2     
+ Time:                 11:21:18    Run-No.:   00
+ Run on host:        pgi_mpi_on
+ Number of PEs:               2    Processor grid (x,y): (   1,   2) calculated
+                                   A 1d-decomposition along y is used
+ ------------------------------------------------------------------------------
+
+ Numerical Schemes:
+ -----------------
+
+ --> Use the Moeng_Wyngaard turbulence closure (LES mode).
+ --> Use the boussinesq approximation for the model equations.
+ --> Solve perturbation pressure via FFT using temperton-algorithm routines
+     perturbation pressure is calculated at every Runge-Kutta step
+ --> Momentum advection via Wicker-Skamarock-Scheme 5th order
+ --> Scalar advection via Wicker-Skamarock-Scheme 5th order
+ --> Loop optimization method: vector
+ --> Time differencing scheme: runge-kutta-3       
+ ------------------------------------------------------------------------------
+
+
+ Run time and time step information:
+ ----------------------------------
+
+ Timestep:             variable     maximum value: 20.000 s    CFL-factor: 0.90
+ Start time:              0.000 s
+ End time:               60.000 s
+
+
+ Computational grid and domain size:
+ ----------------------------------
+
+ Grid length:      dx =      50.000 m    dy =      50.000 m
+                dz(1) =      50.000 m
+                dz(2) =     999.000 m
+
+ Domain size:       x =   2000.000 m     y =   2000.000 m  z(u) =   2862.511 m
+
+ Vertical stretching starts at height:    1225.0 m,
+ Vertical stretching starts at index:           25,
+ Vertical stretching ends at height:   9999999.9 m,
+ Vertical stretching ends at index:             41,
+ Factor used for stretching:                 1.080,
+
+ Number of gridpoints (x,y,z):  (0:  39, 0:  39, 0:  41)
+ Subdomain size (x,y,z):        (    40,     20,     42)
+
+
+    Characteristic levels of the geo. wind component ug:
+
+       Height:         0.0     0.0  m
+       ug:            0.00    0.00  m/s
+       Gradient:    ------    0.00  1/100s
+       Gridpoint:        0       0
+
+    Characteristic levels of the geo. wind component vg:
+
+       Height:         0.0     0.0  m
+       vg:            0.00    0.00  m/s
+       Gradient:    ------    0.00  1/100s
+       Gridpoint:        0       0
+
+
+ Topography information:
+ ----------------------
+
+ Topography: flat                                    
+
+
+ Boundary conditions:
+ -------------------
+
+                     p                    uv                                  pt
+
+ B. bound.: p(0)     = p(1)   | uv(0)     = -uv(1)                | pt(0)     = pt(1)            
+ T. bound.: p(nzt+1) = 0      | uv(nzt+1) = ug(nzt+1), vg(nzt+1)  | pt(nzt+1) = pt(nzt) + dpt/dz_
+
+                     e
+
+ B. bound.: e(0)     = e(1)                                                                      
+ T. bound.: e(nzt+1) = e(nzt) = e(nzt-1)                                                         
+
+ Bottom surface fluxes are used in diffusion terms at k=1
+       Predefined constant heatflux:    0.100000 K m/s
+
+
+    Constant flux layer between bottom surface and first computational u,v-level:
+
+       z_mo =  25.00 m   z0 = 0.1000 m   z0h = 0.10000 m   kappa = 0.40
+       Rif value range:     -20.00 <= rif <= 20.00
+
+
+ Lateral boundaries:
+       left/right:  cyclic              
+       north/south: cyclic              
+
+
+ Initial profiles:
+ ----------------
+
+    Characteristic levels of the initial temperature profile:
+
+       Height:           0.0     0.0   800.0  m
+       Temperature:   300.00  300.00  300.00  K
+       Gradient:      ------    0.00    1.00  K/100m
+       Gridpoint:          0       0      16
+
+
+ List output:
+ -----------
+
+    1D-Profiles:
+       Output every             9999999.90 s
+
+
+ Data output:
+ -----------
+
+
+    Time series:
+       Output format: netCDF 64bit offset                     
+
+       Output every                 0.00 s
+
+ ------------------------------------------------------------------------------
+
+
+ Physical quantities:
+ -------------------
+
+    Geograph. latitude  :   latitude  =  55.0 degr
+    Geograph. longitude :   longitude =   0.0 degr
+    Rotation angle      :   rotation_angle =   0.0 degr
+    Angular velocity    :   omega  = 0.729E-04 rad/s
+    Coriolis parameter  :   f      =  0.000119 1/s
+                            f*     =  0.000084 1/s
+
+    Date and time at model start : 2019-06-21 12:00:00 +00
+
+    Gravity             :   g      =  9.8 m/s**2
+
+    Reference state used in buoyancy terms: initial_profile
+
+
+ Cloud physics quantities / methods:
+ ----------------------------------
+
+
+
+ LES / Turbulence quantities:
+ ---------------------------
+
+    Mixing length is limited to 1.80 * z
+
+
+ Actions during the simulation:
+ -----------------------------
+
+    Disturbance impulse (u,v) every :   150.00 s
+    Disturbance amplitude           :     0.25 m/s
+    Lower disturbance level         :   125.00 m (GP    3)
+    Upper disturbance level         :   625.00 m (GP   13)
+    Disturbances cease as soon as the disturbance energy exceeds 0.010 m**2/s**2
+    Random number generator used    : random-parallel
+
+
+
+ *** dynamic module disabled
+
+ ------------------------------------------------------------------------------
+
+
+
+Run-control output:
+------------------
+
+RUN  ITER. HH:MM:SS.SS    DT(E)     UMAX     VMAX     WMAX     U*    W*      THETA*     Z_I     ENERG.   DISTENERG    DIVOLD     DIVNEW     UMAX(KJI)    VMAX(KJI)    WMAX(KJI)   ADVECX   ADVECY   MGCYC
+---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
+  0      0 00:00:00.00  20.0000A  -0.2131D -0.2288D  0.1182  0.000  1.38   0.000E+00    800.  0.104E-02  0.103E-02  0.597E-03  0.867E-13    7   7  11   11   7  19    5  26   7    0.000    0.000       0
+  0      1 00:00:20.00  20.0000D  -0.2125  -0.2273   0.1172  0.009  0.69  -0.134E+02    100.  0.103E-02  0.102E-02  0.569E-05  0.411E-15    7   7  11   11   7  19    5  26   7    0.000    0.000       0
+  0      2 00:00:40.00  20.0000D  -0.2117  -0.2252   0.1162  0.009  0.69  -0.135E+02    100.  0.102E-02  0.102E-02  0.934E-05  0.416E-15    7   7  11   11   7  19    5  26   7    0.000    0.000       0
+  0      3 00:01:00.00  20.0000D  -0.2106  -0.2227   0.1152  0.009  0.69  -0.137E+02    100.  0.101E-02  0.101E-02  0.130E-04  0.421E-15    7   7  11   11   7  19    5  26   7    0.000    0.000       0
