[3447] | 1 | !> @file src/inifor_io.f90 |
---|
[2696] | 2 | !------------------------------------------------------------------------------! |
---|
[2718] | 3 | ! This file is part of the PALM model system. |
---|
[2696] | 4 | ! |
---|
[2718] | 5 | ! PALM is free software: you can redistribute it and/or modify it under the |
---|
| 6 | ! terms of the GNU General Public License as published by the Free Software |
---|
| 7 | ! Foundation, either version 3 of the License, or (at your option) any later |
---|
[2696] | 8 | ! version. |
---|
| 9 | ! |
---|
[2718] | 10 | ! PALM is distributed in the hope that it will be useful, but WITHOUT ANY |
---|
| 11 | ! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR |
---|
| 12 | ! A PARTICULAR PURPOSE. See the GNU General Public License for more details. |
---|
[2696] | 13 | ! |
---|
| 14 | ! You should have received a copy of the GNU General Public License along with |
---|
| 15 | ! PALM. If not, see <http://www.gnu.org/licenses/>. |
---|
| 16 | ! |
---|
[2718] | 17 | ! Copyright 2017-2018 Leibniz Universitaet Hannover |
---|
| 18 | ! Copyright 2017-2018 Deutscher Wetterdienst Offenbach |
---|
[2696] | 19 | !------------------------------------------------------------------------------! |
---|
| 20 | ! |
---|
| 21 | ! Current revisions: |
---|
| 22 | ! ----------------- |
---|
[3183] | 23 | ! |
---|
| 24 | ! |
---|
| 25 | ! Former revisions: |
---|
| 26 | ! ----------------- |
---|
| 27 | ! $Id: inifor_io.f90 3680 2019-01-18 14:54:12Z hellstea $ |
---|
[3678] | 28 | ! Moved get_input_file_list() here from grid module, added check for presence of |
---|
| 29 | ! input files |
---|
| 30 | ! |
---|
| 31 | ! |
---|
| 32 | ! |
---|
| 33 | ! |
---|
| 34 | ! 3618 2018-12-10 13:25:22Z eckhard |
---|
[3618] | 35 | ! Prefixed all INIFOR modules with inifor_ |
---|
| 36 | ! |
---|
| 37 | ! |
---|
| 38 | ! 3615 2018-12-10 07:21:03Z raasch |
---|
[3615] | 39 | ! bugfix: abort replaced by inifor_abort |
---|
| 40 | ! |
---|
| 41 | ! 3557 2018-11-22 16:01:22Z eckhard |
---|
[3557] | 42 | ! Updated documentation, removed unused subroutine write_netcdf_variable_2d() |
---|
| 43 | ! |
---|
| 44 | ! |
---|
| 45 | ! 3537 2018-11-20 10:53:14Z eckhard |
---|
[3537] | 46 | ! New routine get_netcdf_dim_vector() |
---|
| 47 | ! |
---|
| 48 | ! |
---|
| 49 | ! 3534 2018-11-19 15:35:16Z raasch |
---|
[3534] | 50 | ! bugfix: INTENT attribute changed |
---|
| 51 | ! |
---|
| 52 | ! 3456 2018-10-30 14:29:54Z eckhard |
---|
[3456] | 53 | ! NetCDf output of internal arrays only with --debug option |
---|
| 54 | ! |
---|
| 55 | ! |
---|
| 56 | ! 3447 2018-10-29 15:52:54Z eckhard |
---|
[3447] | 57 | ! Removed INCLUDE statement for get_netcdf_variable() |
---|
| 58 | ! Renamed source files for compatibilty with PALM build system |
---|
| 59 | ! |
---|
| 60 | ! |
---|
| 61 | ! 3395 2018-10-22 17:32:49Z eckhard |
---|
[3395] | 62 | ! Added command-line options for configuring the computation of geostrophic |
---|
| 63 | ! winds (--averagin-mode, --averaging-angle) |
---|
| 64 | ! Added command-line option --input-prefix for setting input file prefixes all |
---|
| 65 | ! at once |
---|
| 66 | ! Added --debug option for more verbose terminal output |
---|
| 67 | ! Added option-specific *_is_set LOGICALs to indicate invocation from the |
---|
| 68 | ! command-line |
---|
| 69 | ! Improved error messages in case of empty file-name strings |
---|
| 70 | ! Improved routine naming |
---|
[3262] | 71 | ! |
---|
| 72 | ! 3183 2018-07-27 14:25:55Z suehring |
---|
[3182] | 73 | ! Introduced new PALM grid stretching |
---|
| 74 | ! Updated variable names and metadata for PIDS v1.9 compatibility |
---|
| 75 | ! Improved handling of the start date string |
---|
| 76 | ! Better compatibility with older Intel compilers: |
---|
| 77 | ! - avoiding implicit array allocation with new get_netcdf_variable() |
---|
| 78 | ! subroutine instead of function |
---|
| 79 | ! Improved command line interface: |
---|
| 80 | ! - Added configuration validation |
---|
| 81 | ! - New options to configure input file prefixes |
---|
| 82 | ! - GNU-style short and long option names |
---|
| 83 | ! - Added version and copyright output |
---|
[2696] | 84 | ! |
---|
[3182] | 85 | ! |
---|
[3183] | 86 | ! 3182 2018-07-27 13:36:03Z suehring |
---|
[2696] | 87 | ! Initial revision |
---|
| 88 | ! |
---|
| 89 | ! |
---|
| 90 | ! |
---|
| 91 | ! Authors: |
---|
| 92 | ! -------- |
---|
[3557] | 93 | !> @author Eckhard Kadasch (Deutscher Wetterdienst, Offenbach) |
---|
[2696] | 94 | ! |
---|
| 95 | ! Description: |
---|
| 96 | ! ------------ |
---|
| 97 | !> The io module contains the functions needed to read and write netCDF data in |
---|
| 98 | !> INIFOR. |
---|
| 99 | !------------------------------------------------------------------------------! |
---|
[3680] | 100 | #if defined ( __netcdf ) |
---|
[3618] | 101 | MODULE inifor_io |
---|
[2696] | 102 | |
---|
[3618] | 103 | USE inifor_control |
---|
| 104 | USE inifor_defs, & |
---|
[3182] | 105 | ONLY: DATE, SNAME, PATH, PI, dp, hp, TO_RADIANS, TO_DEGREES, VERSION |
---|
[3618] | 106 | USE inifor_types |
---|
| 107 | USE inifor_util, & |
---|
[3678] | 108 | ONLY: add_hours_to, reverse, str, real_to_str |
---|
[2696] | 109 | USE netcdf |
---|
| 110 | |
---|
| 111 | IMPLICIT NONE |
---|
| 112 | |
---|
[3557] | 113 | !------------------------------------------------------------------------------! |
---|
| 114 | ! Description: |
---|
| 115 | ! ------------ |
---|
| 116 | !> get_netcdf_variable() reads the netCDF data and metadate for the netCDF |
---|
| 117 | !> variable 'in_var % name' from the file 'in_file'. The netCDF data array is |
---|
| 118 | !> stored in the 'buffer' array and metadata added to the respective members of |
---|
| 119 | !> the given 'in_var'. |
---|
| 120 | !------------------------------------------------------------------------------! |
---|
[3182] | 121 | INTERFACE get_netcdf_variable |
---|
| 122 | MODULE PROCEDURE get_netcdf_variable_int |
---|
| 123 | MODULE PROCEDURE get_netcdf_variable_real |
---|
| 124 | END INTERFACE get_netcdf_variable |
---|
| 125 | |
---|
| 126 | PRIVATE :: get_netcdf_variable_int, get_netcdf_variable_real |
---|
| 127 | |
---|
[2696] | 128 | CONTAINS |
---|
| 129 | |
---|
[3557] | 130 | !------------------------------------------------------------------------------! |
---|
| 131 | ! Description: |
---|
| 132 | ! ------------ |
---|
| 133 | !> get_netcdf_variable_int() implements the integer variant for the |
---|
| 134 | !> get_netcdf_variable interface. |
---|
| 135 | !------------------------------------------------------------------------------! |
---|
[3182] | 136 | SUBROUTINE get_netcdf_variable_int(in_file, in_var, buffer) |
---|
| 137 | |
---|
| 138 | CHARACTER(LEN=PATH), INTENT(IN) :: in_file |
---|
| 139 | TYPE(nc_var), INTENT(INOUT) :: in_var |
---|
| 140 | INTEGER(hp), ALLOCATABLE, INTENT(INOUT) :: buffer(:,:,:) |
---|
| 141 | |
---|
[3447] | 142 | INTEGER :: ncid |
---|
| 143 | INTEGER, DIMENSION(3) :: start, count |
---|
[3182] | 144 | |
---|
[3447] | 145 | IF ( nf90_open( TRIM(in_file), NF90_NOWRITE, ncid ) .EQ. NF90_NOERR .AND. & |
---|
| 146 | nf90_inq_varid( ncid, in_var % name, in_var % varid ) .EQ. NF90_NOERR ) THEN |
---|
| 147 | |
---|
| 148 | CALL get_input_dimensions(in_var, ncid) |
---|
| 149 | |
---|
| 150 | CALL get_netcdf_start_and_count(in_var, start, count) |
---|
| 151 | CALL run_control('time', 'read') |
---|
| 152 | |
---|
| 153 | ALLOCATE( buffer( count(1), count(2), count(3) ) ) |
---|
| 154 | CALL run_control('time', 'alloc') |
---|
| 155 | |
---|
| 156 | CALL check(nf90_get_var( ncid, in_var % varid, buffer, & |
---|
| 157 | start = start, & |
---|
| 158 | count = count )) |
---|
| 159 | |
---|
| 160 | ELSE |
---|
| 161 | |
---|
| 162 | message = "Failed to read '" // TRIM(in_var % name) // & |
---|
| 163 | "' from file '" // TRIM(in_file) // "'." |
---|
[3615] | 164 | CALL inifor_abort('get_netcdf_variable', message) |
---|
[3447] | 165 | |
---|
| 166 | END IF |
---|
| 167 | |
---|
| 168 | CALL check(nf90_close(ncid)) |
---|
| 169 | CALL run_control('time', 'read') |
---|
| 170 | |
---|
[3182] | 171 | END SUBROUTINE get_netcdf_variable_int |
---|
| 172 | |
---|
| 173 | |
---|
[3557] | 174 | !------------------------------------------------------------------------------! |
---|
| 175 | ! Description: |
---|
| 176 | ! ------------ |
---|
| 177 | !> get_netcdf_variable_real() implements the real variant for the |
---|
| 178 | !> get_netcdf_variable interface. |
---|
| 179 | !------------------------------------------------------------------------------! |
---|
[3182] | 180 | SUBROUTINE get_netcdf_variable_real(in_file, in_var, buffer) |
---|
| 181 | |
---|
| 182 | CHARACTER(LEN=PATH), INTENT(IN) :: in_file |
---|
| 183 | TYPE(nc_var), INTENT(INOUT) :: in_var |
---|
| 184 | REAL(dp), ALLOCATABLE, INTENT(INOUT) :: buffer(:,:,:) |
---|
| 185 | |
---|
[3447] | 186 | INTEGER :: ncid |
---|
| 187 | INTEGER, DIMENSION(3) :: start, count |
---|
[3182] | 188 | |
---|
[3447] | 189 | IF ( nf90_open( TRIM(in_file), NF90_NOWRITE, ncid ) .EQ. NF90_NOERR .AND. & |
---|
| 190 | nf90_inq_varid( ncid, in_var % name, in_var % varid ) .EQ. NF90_NOERR ) THEN |
---|
| 191 | |
---|
| 192 | CALL get_input_dimensions(in_var, ncid) |
---|
| 193 | |
---|
| 194 | CALL get_netcdf_start_and_count(in_var, start, count) |
---|
| 195 | CALL run_control('time', 'read') |
---|
| 196 | |
---|
| 197 | ALLOCATE( buffer( count(1), count(2), count(3) ) ) |
---|
| 198 | CALL run_control('time', 'alloc') |
---|
| 199 | |
---|
| 200 | CALL check(nf90_get_var( ncid, in_var % varid, buffer, & |
---|
| 201 | start = start, & |
---|
| 202 | count = count )) |
---|
| 203 | |
---|
| 204 | ELSE |
---|
| 205 | |
---|
| 206 | message = "Failed to read '" // TRIM(in_var % name) // & |
---|
| 207 | "' from file '" // TRIM(in_file) // "'." |
---|
[3615] | 208 | CALL inifor_abort('get_netcdf_variable', message) |
---|
[3447] | 209 | |
---|
| 210 | END IF |
---|
| 211 | |
---|
| 212 | CALL check(nf90_close(ncid)) |
---|
| 213 | CALL run_control('time', 'read') |
---|
| 214 | |
---|
[3182] | 215 | END SUBROUTINE get_netcdf_variable_real |
---|
| 216 | |
---|
| 217 | |
---|
[3557] | 218 | !------------------------------------------------------------------------------! |
---|
| 219 | ! Description: |
---|
| 220 | ! ------------ |
---|
| 221 | !> get_netcdf_dim_vector() reads the coordinate array 'coordname' from the |
---|
| 222 | !> netCDF file 'filename'. |
---|
| 223 | !------------------------------------------------------------------------------! |
---|
| 224 | SUBROUTINE get_netcdf_dim_vector(filename, coordname, coords) |
---|
[3537] | 225 | |
---|
| 226 | CHARACTER(LEN=*), INTENT(IN) :: filename |
---|
[3557] | 227 | CHARACTER(LEN=*), INTENT(IN) :: coordname |
---|
| 228 | REAL(dp), ALLOCATABLE, INTENT(INOUT) :: coords(:) |
---|
[3537] | 229 | |
---|
| 230 | INTEGER :: ncid, varid, dimlen |
---|
| 231 | INTEGER :: dimids(NF90_MAX_VAR_DIMS) |
---|
| 232 | |
---|
| 233 | IF ( nf90_open( TRIM(filename), NF90_NOWRITE, ncid ) .EQ. NF90_NOERR .AND. & |
---|
[3557] | 234 | nf90_inq_varid( ncid, coordname, varid ) .EQ. NF90_NOERR ) THEN |
---|
[3537] | 235 | |
---|
| 236 | CALL check(nf90_inquire_variable( ncid, varid, dimids = dimids )) |
---|
| 237 | CALL check(nf90_inquire_dimension( ncid, dimids(1), len = dimlen )) |
---|
| 238 | |
---|
[3557] | 239 | ALLOCATE(coords(dimlen)) |
---|
| 240 | CALL check(nf90_get_var( ncid, varid, coords)) |
---|
[3537] | 241 | |
---|
| 242 | ELSE |
---|
| 243 | |
---|
[3557] | 244 | message = "Failed to read '" // TRIM(coordname) // & |
---|
[3537] | 245 | "' from file '" // TRIM(filename) // "'." |
---|
[3615] | 246 | CALL inifor_abort('get_netcdf_dim_vector', message) |
---|
[3537] | 247 | |
---|
| 248 | END IF |
---|
| 249 | |
---|
| 250 | END SUBROUTINE get_netcdf_dim_vector |
---|
| 251 | |
---|
| 252 | |
---|
[3557] | 253 | !------------------------------------------------------------------------------! |
---|
| 254 | ! Description: |
---|
| 255 | ! ------------ |
---|
| 256 | !> get_input_dimensions() reads dimensions metadata of the netCDF variable given |
---|
| 257 | !> by 'in_var % name' into 'in_var' data structure. |
---|
| 258 | !------------------------------------------------------------------------------! |
---|
[3447] | 259 | SUBROUTINE get_input_dimensions(in_var, ncid) |
---|
| 260 | |
---|
[3534] | 261 | TYPE(nc_var), INTENT(INOUT) :: in_var |
---|
| 262 | INTEGER, INTENT(IN) :: ncid |
---|
[3447] | 263 | |
---|
| 264 | INTEGER :: i |
---|
| 265 | |
---|
| 266 | CALL check(nf90_get_att( ncid, in_var % varid, "long_name", & |
---|
| 267 | in_var % long_name)) |
---|
| 268 | |
---|
| 269 | CALL check(nf90_get_att( ncid, in_var % varid, "units", & |
---|
| 270 | in_var % units )) |
---|
| 271 | |
---|
| 272 | CALL check(nf90_inquire_variable( ncid, in_var % varid, & |
---|
| 273 | ndims = in_var % ndim, & |
---|
| 274 | dimids = in_var % dimids )) |
---|
| 275 | |
---|
| 276 | DO i = 1, in_var % ndim |
---|
| 277 | CALL check(nf90_inquire_dimension( ncid, in_var % dimids(i), & |
---|
| 278 | name = in_var % dimname(i), & |
---|
| 279 | len = in_var % dimlen(i) )) |
---|
| 280 | END DO |
---|
| 281 | |
---|
| 282 | END SUBROUTINE get_input_dimensions |
---|
| 283 | |
---|
| 284 | |
---|
[3557] | 285 | !------------------------------------------------------------------------------! |
---|
| 286 | ! Description: |
---|
| 287 | ! ------------ |
---|
| 288 | !> get_netcdf_start_and_count() gets the start position and element counts for |
---|
| 289 | !> the given netCDF file. This information is used in get_netcdf_variable_int() |
---|
| 290 | !> and _real() for reading input variables.. |
---|
| 291 | !------------------------------------------------------------------------------! |
---|
[3447] | 292 | SUBROUTINE get_netcdf_start_and_count(in_var, start, count) |
---|
| 293 | |
---|
| 294 | TYPE(nc_var), INTENT(INOUT) :: in_var |
---|
| 295 | INTEGER, DIMENSION(3), INTENT(OUT) :: start, count |
---|
| 296 | |
---|
| 297 | INTEGER :: ndim |
---|
| 298 | |
---|
| 299 | IF ( in_var % ndim .LT. 2 .OR. in_var % ndim .GT. 4 ) THEN |
---|
| 300 | |
---|
| 301 | message = "Failed reading NetCDF variable " // & |
---|
[3537] | 302 | TRIM(in_var % name) // " with " // TRIM(str(in_var % ndim)) // & |
---|
[3447] | 303 | " dimensions because only two- and and three-dimensional" // & |
---|
| 304 | " variables are supported." |
---|
[3615] | 305 | CALL inifor_abort('get_netcdf_start_and_count', message) |
---|
[3447] | 306 | |
---|
| 307 | END IF |
---|
| 308 | |
---|
| 309 | start = (/ 1, 1, 1 /) |
---|
| 310 | IF ( TRIM(in_var % name) .EQ. 'T_SO' ) THEN |
---|
[3557] | 311 | ! |
---|
| 312 | !-- Skip depth = 0.0 for T_SO and reduce number of depths from 9 to 8 |
---|
[3447] | 313 | in_var % dimlen(3) = in_var % dimlen(3) - 1 |
---|
| 314 | |
---|
[3557] | 315 | ! |
---|
| 316 | !-- Start reading from second level, e.g. depth = 0.005 instead of 0.0 |
---|
[3447] | 317 | start(3) = 2 |
---|
| 318 | END IF |
---|
| 319 | |
---|
| 320 | IF (in_var % ndim .EQ. 2) THEN |
---|
| 321 | in_var % dimlen(3) = 1 |
---|
| 322 | ENDIF |
---|
| 323 | |
---|
| 324 | ndim = MIN(in_var % ndim, 3) |
---|
| 325 | count = (/ 1, 1, 1 /) |
---|
| 326 | count(1:ndim) = in_var % dimlen(1:ndim) |
---|
| 327 | |
---|
| 328 | END SUBROUTINE get_netcdf_start_and_count |
---|
| 329 | |
---|
| 330 | |
---|
[3557] | 331 | !------------------------------------------------------------------------------! |
---|
| 332 | ! Description: |
---|
| 333 | ! ------------ |
---|
| 334 | !> Routine for defining netCDF variables in the dynamic driver, INIFOR's netCDF |
---|
| 335 | !> output. |
---|
| 336 | !------------------------------------------------------------------------------! |
---|
[2696] | 337 | SUBROUTINE netcdf_define_variable(var, ncid) |
---|
| 338 | |
---|
| 339 | TYPE(nc_var), INTENT(INOUT) :: var |
---|
| 340 | INTEGER, INTENT(IN) :: ncid |
---|
| 341 | |
---|
| 342 | CALL check(nf90_def_var(ncid, var % name, NF90_FLOAT, var % dimids(1:var % ndim), var % varid)) |
---|
| 343 | CALL check(nf90_put_att(ncid, var % varid, "long_name", var % long_name)) |
---|
| 344 | CALL check(nf90_put_att(ncid, var % varid, "units", var % units)) |
---|
[3182] | 345 | IF ( var % lod .GE. 0 ) THEN |
---|
| 346 | CALL check(nf90_put_att(ncid, var % varid, "lod", var % lod)) |
---|
| 347 | END IF |
---|
[2696] | 348 | CALL check(nf90_put_att(ncid, var % varid, "source", var % source)) |
---|
| 349 | CALL check(nf90_put_att(ncid, var % varid, "_FillValue", NF90_FILL_REAL)) |
---|
| 350 | |
---|
| 351 | END SUBROUTINE netcdf_define_variable |
---|
| 352 | |
---|
| 353 | |
---|
[3557] | 354 | !------------------------------------------------------------------------------! |
---|
| 355 | ! Description: |
---|
| 356 | ! ------------ |
---|
| 357 | !> netcdf_get_dimensions() reads in all dimensions and their lengths and stores |
---|
| 358 | !> them in the given the 'var' data structure. This information is used later |
---|
| 359 | !> for writing output variables in update_output(). |
---|
| 360 | !------------------------------------------------------------------------------! |
---|
[2696] | 361 | SUBROUTINE netcdf_get_dimensions(var, ncid) |
---|
| 362 | |
---|
| 363 | TYPE(nc_var), INTENT(INOUT) :: var |
---|
| 364 | INTEGER, INTENT(IN) :: ncid |
---|
| 365 | INTEGER :: i |
---|
| 366 | CHARACTER(SNAME) :: null |
---|
| 367 | |
---|
| 368 | DO i = 1, var % ndim |
---|
| 369 | CALL check(nf90_inquire_dimension(ncid, var % dimids(i), & |
---|
| 370 | name = null, & |
---|
| 371 | len = var % dimlen(i) ) ) |
---|
| 372 | END DO |
---|
| 373 | |
---|
| 374 | END SUBROUTINE netcdf_get_dimensions |
---|
| 375 | |
---|
| 376 | |
---|
| 377 | !------------------------------------------------------------------------------! |
---|
| 378 | ! Description: |
---|
| 379 | ! ------------ |
---|
[3557] | 380 | !> This routine parses and interpretes the command-line options and stores the |
---|
| 381 | !> resulting settings in the 'cfg' data structure. |
---|
[2696] | 382 | !------------------------------------------------------------------------------! |
---|
[3182] | 383 | SUBROUTINE parse_command_line_arguments( cfg ) |
---|
[2696] | 384 | |
---|
[3182] | 385 | TYPE(inifor_config), INTENT(INOUT) :: cfg |
---|
[2696] | 386 | |
---|
[3182] | 387 | CHARACTER(LEN=PATH) :: option, arg |
---|
| 388 | INTEGER :: arg_count, i |
---|
[2696] | 389 | |
---|
[3395] | 390 | cfg % p0_is_set = .FALSE. |
---|
| 391 | cfg % ug_is_set = .FALSE. |
---|
| 392 | cfg % vg_is_set = .FALSE. |
---|
| 393 | cfg % flow_prefix_is_set = .FALSE. |
---|
| 394 | cfg % input_prefix_is_set = .FALSE. |
---|
| 395 | cfg % radiation_prefix_is_set = .FALSE. |
---|
| 396 | cfg % soil_prefix_is_set = .FALSE. |
---|
| 397 | cfg % soilmoisture_prefix_is_set = .FALSE. |
---|
| 398 | |
---|
[2696] | 399 | arg_count = COMMAND_ARGUMENT_COUNT() |
---|
| 400 | IF (arg_count .GT. 0) THEN |
---|
| 401 | |
---|
| 402 | message = "The -clon and -clat command line options are depricated. " // & |
---|
| 403 | "Please remove them form your inifor command and specify the " // & |
---|
| 404 | "location of the PALM-4U origin either" // NEW_LINE(' ') // & |
---|
[3182] | 405 | " - by setting the namelist parameters 'longitude' and 'latitude', or" // NEW_LINE(' ') // & |
---|
[2696] | 406 | " - by providing a static driver netCDF file via the -static command-line option." |
---|
| 407 | |
---|
[3182] | 408 | i = 1 |
---|
| 409 | DO WHILE (i .LE. arg_count) |
---|
[2696] | 410 | |
---|
| 411 | CALL GET_COMMAND_ARGUMENT( i, option ) |
---|
| 412 | |
---|
| 413 | SELECT CASE( TRIM(option) ) |
---|
| 414 | |
---|
[3395] | 415 | CASE( '--averaging-mode' ) |
---|
| 416 | CALL get_option_argument( i, arg ) |
---|
| 417 | cfg % averaging_mode = TRIM(arg) |
---|
| 418 | |
---|
[3182] | 419 | CASE( '-date', '-d', '--date' ) |
---|
| 420 | CALL get_option_argument( i, arg ) |
---|
| 421 | cfg % start_date = TRIM(arg) |
---|
[2696] | 422 | |
---|
[3395] | 423 | CASE( '--debug' ) |
---|
| 424 | cfg % debug = .TRUE. |
---|
| 425 | |
---|
[3182] | 426 | CASE( '-z0', '-z', '--elevation' ) |
---|
| 427 | CALL get_option_argument( i, arg ) |
---|
| 428 | READ(arg, *) cfg % z0 |
---|
[2696] | 429 | |
---|
[3182] | 430 | CASE( '-p0', '-r', '--surface-pressure' ) |
---|
[3395] | 431 | cfg % p0_is_set = .TRUE. |
---|
[3182] | 432 | CALL get_option_argument( i, arg ) |
---|
| 433 | READ(arg, *) cfg % p0 |
---|
[2696] | 434 | |
---|
[3182] | 435 | CASE( '-ug', '-u', '--geostrophic-u' ) |
---|
[3395] | 436 | cfg % ug_is_set = .TRUE. |
---|
[3182] | 437 | CALL get_option_argument( i, arg ) |
---|
| 438 | READ(arg, *) cfg % ug |
---|
[2696] | 439 | |
---|
[3182] | 440 | CASE( '-vg', '-v', '--geostrophic-v' ) |
---|
[3395] | 441 | cfg % vg_is_set = .TRUE. |
---|
[3182] | 442 | CALL get_option_argument( i, arg ) |
---|
| 443 | READ(arg, *) cfg % vg |
---|
[2696] | 444 | |
---|
[3182] | 445 | CASE( '-clon', '-clat' ) |
---|
[3615] | 446 | CALL inifor_abort('parse_command_line_arguments', message) |
---|
[2696] | 447 | |
---|
[3182] | 448 | CASE( '-path', '-p', '--path' ) |
---|
| 449 | CALL get_option_argument( i, arg ) |
---|
| 450 | cfg % input_path = TRIM(arg) |
---|
[2696] | 451 | |
---|
[3182] | 452 | CASE( '-hhl', '-l', '--hhl-file' ) |
---|
| 453 | CALL get_option_argument( i, arg ) |
---|
[3395] | 454 | cfg % hhl_file = TRIM(arg) |
---|
[2696] | 455 | |
---|
[3395] | 456 | CASE( '--input-prefix') |
---|
| 457 | CALL get_option_argument( i, arg ) |
---|
| 458 | cfg % input_prefix = TRIM(arg) |
---|
| 459 | cfg % input_prefix_is_set = .TRUE. |
---|
| 460 | |
---|
| 461 | CASE( '-a', '--averaging-angle' ) |
---|
| 462 | CALL get_option_argument( i, arg ) |
---|
| 463 | READ(arg, *) cfg % averaging_angle |
---|
| 464 | |
---|
[3182] | 465 | CASE( '-static', '-t', '--static-driver' ) |
---|
| 466 | CALL get_option_argument( i, arg ) |
---|
[3395] | 467 | cfg % static_driver_file = TRIM(arg) |
---|
[2696] | 468 | |
---|
[3182] | 469 | CASE( '-soil', '-s', '--soil-file') |
---|
| 470 | CALL get_option_argument( i, arg ) |
---|
[3395] | 471 | cfg % soiltyp_file = TRIM(arg) |
---|
[2696] | 472 | |
---|
[3182] | 473 | CASE( '--flow-prefix') |
---|
| 474 | CALL get_option_argument( i, arg ) |
---|
[3395] | 475 | cfg % flow_prefix = TRIM(arg) |
---|
| 476 | cfg % flow_prefix_is_set = .TRUE. |
---|
| 477 | |
---|
[3182] | 478 | CASE( '--radiation-prefix') |
---|
| 479 | CALL get_option_argument( i, arg ) |
---|
[3395] | 480 | cfg % radiation_prefix = TRIM(arg) |
---|
| 481 | cfg % radiation_prefix_is_set = .TRUE. |
---|
| 482 | |
---|
[3182] | 483 | CASE( '--soil-prefix') |
---|
| 484 | CALL get_option_argument( i, arg ) |
---|
[3395] | 485 | cfg % soil_prefix = TRIM(arg) |
---|
| 486 | cfg % soil_prefix_is_set = .TRUE. |
---|
| 487 | |
---|
[3182] | 488 | CASE( '--soilmoisture-prefix') |
---|
| 489 | CALL get_option_argument( i, arg ) |
---|
[3395] | 490 | cfg % soilmoisture_prefix = TRIM(arg) |
---|
| 491 | cfg % soilmoisture_prefix_is_set = .TRUE. |
---|
[2696] | 492 | |
---|
[3182] | 493 | CASE( '-o', '--output' ) |
---|
| 494 | CALL get_option_argument( i, arg ) |
---|
| 495 | cfg % output_file = TRIM(arg) |
---|
[2696] | 496 | |
---|
[3182] | 497 | CASE( '-n', '--namelist' ) |
---|
| 498 | CALL get_option_argument( i, arg ) |
---|
| 499 | cfg % namelist_file = TRIM(arg) |
---|
[2696] | 500 | |
---|
[3182] | 501 | CASE( '-mode', '-i', '--init-mode' ) |
---|
| 502 | CALL get_option_argument( i, arg ) |
---|
| 503 | cfg % ic_mode = TRIM(arg) |
---|
| 504 | |
---|
| 505 | CASE( '-f', '--forcing-mode' ) |
---|
| 506 | CALL get_option_argument( i, arg ) |
---|
| 507 | cfg % bc_mode = TRIM(arg) |
---|
| 508 | |
---|
| 509 | CASE( '--version' ) |
---|
| 510 | CALL print_version() |
---|
| 511 | STOP |
---|
| 512 | |
---|
| 513 | CASE( '--help' ) |
---|
| 514 | CALL print_version() |
---|
| 515 | PRINT *, "" |
---|
| 516 | PRINT *, "For a list of command-line options have a look at the README file." |
---|
| 517 | STOP |
---|
| 518 | |
---|
[2696] | 519 | CASE DEFAULT |
---|
[3182] | 520 | message = "unknown option '" // TRIM(option) // "'." |
---|
[3615] | 521 | CALL inifor_abort('parse_command_line_arguments', message) |
---|
[2696] | 522 | |
---|
| 523 | END SELECT |
---|
| 524 | |
---|
[3182] | 525 | i = i + 1 |
---|
| 526 | |
---|
[2696] | 527 | END DO |
---|
| 528 | |
---|
| 529 | ELSE |
---|
| 530 | |
---|
| 531 | message = "No arguments present, using default input and output files" |
---|
| 532 | CALL report('parse_command_line_arguments', message) |
---|
| 533 | |
---|
| 534 | END IF |
---|
| 535 | |
---|
| 536 | END SUBROUTINE parse_command_line_arguments |
---|
| 537 | |
---|
[3182] | 538 | |
---|
[3678] | 539 | |
---|
| 540 | SUBROUTINE get_datetime_file_list( start_date_string, start_hour, end_hour, & |
---|
| 541 | step_hour, input_path, prefix, suffix, & |
---|
| 542 | file_list ) |
---|
| 543 | |
---|
| 544 | CHARACTER (LEN=DATE), INTENT(IN) :: start_date_string |
---|
| 545 | CHARACTER (LEN=*), INTENT(IN) :: prefix, suffix, input_path |
---|
| 546 | INTEGER, INTENT(IN) :: start_hour, end_hour, step_hour |
---|
| 547 | CHARACTER(LEN=*), ALLOCATABLE, INTENT(INOUT) :: file_list(:) |
---|
| 548 | |
---|
| 549 | INTEGER :: number_of_intervals, hour, i |
---|
| 550 | CHARACTER(LEN=DATE) :: date_string |
---|
| 551 | |
---|
| 552 | number_of_intervals = CEILING( REAL(end_hour - start_hour) / step_hour ) |
---|
| 553 | ALLOCATE( file_list(number_of_intervals + 1) ) |
---|
| 554 | |
---|
| 555 | DO i = 0, number_of_intervals |
---|
| 556 | |
---|
| 557 | hour = start_hour + i * step_hour |
---|
| 558 | date_string = add_hours_to(start_date_string, hour) |
---|
| 559 | |
---|
| 560 | file_list(i+1) = TRIM(input_path) // TRIM(prefix) // & |
---|
| 561 | TRIM(date_string) // TRIM(suffix) // '.nc' |
---|
| 562 | |
---|
| 563 | message = "Set up input file name '" // TRIM(file_list(i+1)) // "'" |
---|
| 564 | CALL report('input_file_list', message) |
---|
| 565 | |
---|
| 566 | END DO |
---|
| 567 | |
---|
| 568 | END SUBROUTINE get_datetime_file_list |
---|
| 569 | |
---|
[3557] | 570 | !------------------------------------------------------------------------------! |
---|
| 571 | ! Description: |
---|
| 572 | ! ------------ |
---|
[3678] | 573 | !> Establish a list of files based on the given start and end times and file |
---|
| 574 | !> prefixes and suffixes. |
---|
| 575 | !------------------------------------------------------------------------------! |
---|
| 576 | SUBROUTINE get_input_file_list( start_date_string, start_hour, end_hour, & |
---|
| 577 | step_hour, input_path, prefix, suffix, & |
---|
| 578 | file_list ) |
---|
| 579 | |
---|
| 580 | CHARACTER (LEN=DATE), INTENT(IN) :: start_date_string |
---|
| 581 | CHARACTER (LEN=*), INTENT(IN) :: prefix, suffix, input_path |
---|
| 582 | INTEGER, INTENT(IN) :: start_hour, end_hour, step_hour |
---|
| 583 | CHARACTER(LEN=*), ALLOCATABLE, INTENT(INOUT) :: file_list(:) |
---|
| 584 | |
---|
| 585 | INTEGER :: number_of_intervals, hour, i |
---|
| 586 | CHARACTER(LEN=DATE) :: date_string |
---|
| 587 | CHARACTER(LEN=PATH) :: file_name |
---|
| 588 | |
---|
| 589 | CALL get_datetime_file_list( start_date_string, start_hour, end_hour, & |
---|
| 590 | step_hour, input_path, prefix, suffix, & |
---|
| 591 | file_list ) |
---|
| 592 | |
---|
| 593 | tip = "Please check if you specified the correct file prefix " // & |
---|
| 594 | "using the options --input-prefix, --flow-prefix, etc." |
---|
| 595 | |
---|
| 596 | DO i = 1, SIZE(file_list) |
---|
| 597 | CALL verify_file(file_list(i), 'input', tip) |
---|
| 598 | END DO |
---|
| 599 | |
---|
| 600 | END SUBROUTINE get_input_file_list |
---|
| 601 | |
---|
| 602 | |
---|
| 603 | !------------------------------------------------------------------------------! |
---|
| 604 | ! Description: |
---|
| 605 | ! ------------ |
---|
| 606 | !> Abort INIFOR if the given file is not present. |
---|
| 607 | !------------------------------------------------------------------------------! |
---|
| 608 | SUBROUTINE verify_file(file_name, file_kind, tip) |
---|
| 609 | |
---|
| 610 | CHARACTER(LEN=*), INTENT(IN) :: file_name, file_kind |
---|
| 611 | CHARACTER(LEN=*), INTENT(IN), OPTIONAL :: tip |
---|
| 612 | |
---|
| 613 | IF (.NOT. file_present(file_name)) THEN |
---|
| 614 | |
---|
| 615 | IF (LEN(TRIM(file_name)) == 0) THEN |
---|
| 616 | |
---|
| 617 | message = "No name was given for the " // TRIM(file_kind) // " file." |
---|
| 618 | |
---|
| 619 | ELSE |
---|
| 620 | |
---|
| 621 | message = "The " // TRIM(file_kind) // " file '" // & |
---|
| 622 | TRIM(file_name) // "' was not found." |
---|
| 623 | |
---|
| 624 | IF (PRESENT(tip)) THEN |
---|
| 625 | message = TRIM(message) // " " // TRIM(tip) |
---|
| 626 | END IF |
---|
| 627 | |
---|
| 628 | END IF |
---|
| 629 | |
---|
| 630 | CALL inifor_abort('verify_file', message) |
---|
| 631 | |
---|
| 632 | END IF |
---|
| 633 | |
---|
| 634 | END SUBROUTINE verify_file |
---|
| 635 | |
---|
| 636 | |
---|
| 637 | !------------------------------------------------------------------------------! |
---|
| 638 | ! Description: |
---|
| 639 | ! ------------ |
---|
[3557] | 640 | !> Get the argument of the i'th command line option, which is at the location |
---|
| 641 | !> i+1 of the argument list. |
---|
| 642 | !------------------------------------------------------------------------------! |
---|
[3182] | 643 | SUBROUTINE get_option_argument(i, arg) |
---|
| 644 | CHARACTER(LEN=PATH), INTENT(INOUT) :: arg |
---|
| 645 | INTEGER, INTENT(INOUT) :: i |
---|
[2696] | 646 | |
---|
[3182] | 647 | i = i + 1 |
---|
| 648 | CALL GET_COMMAND_ARGUMENT(i, arg) |
---|
| 649 | |
---|
| 650 | END SUBROUTINE |
---|
| 651 | |
---|
| 652 | |
---|
[3557] | 653 | !------------------------------------------------------------------------------! |
---|
| 654 | ! Description: |
---|
| 655 | ! ------------ |
---|
| 656 | !> Checks the INIFOR configuration 'cfg' for plausibility. |
---|
| 657 | !------------------------------------------------------------------------------! |
---|
[3182] | 658 | SUBROUTINE validate_config(cfg) |
---|
| 659 | TYPE(inifor_config), INTENT(IN) :: cfg |
---|
| 660 | |
---|
[3678] | 661 | CALL verify_file(cfg % hhl_file, 'HHL') |
---|
| 662 | CALL verify_file(cfg % namelist_file, 'NAMELIST') |
---|
| 663 | CALL verify_file(cfg % soiltyp_file, 'SOILTYP') |
---|
[3182] | 664 | |
---|
[3557] | 665 | ! |
---|
| 666 | !-- Only check optional static driver file name, if it has been given. |
---|
[3182] | 667 | IF (TRIM(cfg % static_driver_file) .NE. '') THEN |
---|
[3678] | 668 | CALL verify_file(cfg % static_driver_file, 'static driver') |
---|
[3182] | 669 | END IF |
---|
| 670 | |
---|
| 671 | SELECT CASE( TRIM(cfg % ic_mode) ) |
---|
| 672 | CASE( 'profile', 'volume') |
---|
| 673 | CASE DEFAULT |
---|
| 674 | message = "Initialization mode '" // TRIM(cfg % ic_mode) //& |
---|
| 675 | "' is not supported. " //& |
---|
| 676 | "Please select either 'profile' or 'volume', " //& |
---|
| 677 | "or omit the -i/--init-mode/-mode option entirely, which corresponds "//& |
---|
| 678 | "to the latter." |
---|
[3615] | 679 | CALL inifor_abort( 'validate_config', message ) |
---|
[3182] | 680 | END SELECT |
---|
| 681 | |
---|
| 682 | |
---|
| 683 | SELECT CASE( TRIM(cfg % bc_mode) ) |
---|
| 684 | CASE( 'real', 'ideal') |
---|
| 685 | CASE DEFAULT |
---|
| 686 | message = "Forcing mode '" // TRIM(cfg % bc_mode) //& |
---|
| 687 | "' is not supported. " //& |
---|
| 688 | "Please select either 'real' or 'ideal', " //& |
---|
| 689 | "or omit the -f/--forcing-mode option entirely, which corresponds "//& |
---|
| 690 | "to the latter." |
---|
[3615] | 691 | CALL inifor_abort( 'validate_config', message ) |
---|
[3182] | 692 | END SELECT |
---|
| 693 | |
---|
[3395] | 694 | SELECT CASE( TRIM(cfg % averaging_mode) ) |
---|
| 695 | CASE( 'level', 'height') |
---|
| 696 | CASE DEFAULT |
---|
| 697 | message = "Averaging mode '" // TRIM(cfg % averaging_mode) //& |
---|
| 698 | "' is not supported. " //& |
---|
| 699 | "Please select either 'height' or 'level', " //& |
---|
| 700 | "or omit the --averaging-mode option entirely, which corresponds "//& |
---|
| 701 | "to the latter." |
---|
[3615] | 702 | CALL inifor_abort( 'validate_config', message ) |
---|
[3395] | 703 | END SELECT |
---|
[3182] | 704 | |
---|
[3395] | 705 | IF ( cfg % ug_is_set .NEQV. cfg % vg_is_set ) THEN |
---|
| 706 | message = "You specified only one component of the geostrophic " // & |
---|
| 707 | "wind. Please specify either both or none." |
---|
[3615] | 708 | CALL inifor_abort( 'validate_config', message ) |
---|
[3395] | 709 | END IF |
---|
| 710 | |
---|
[3182] | 711 | END SUBROUTINE validate_config |
---|
| 712 | |
---|
| 713 | |
---|
[3557] | 714 | !------------------------------------------------------------------------------! |
---|
| 715 | ! Description: |
---|
| 716 | ! ------------ |
---|
| 717 | !> Check whether the given file is present on the filesystem. |
---|
| 718 | !------------------------------------------------------------------------------! |
---|
[3678] | 719 | LOGICAL FUNCTION file_present(filename) |
---|
[3182] | 720 | CHARACTER(LEN=PATH), INTENT(IN) :: filename |
---|
| 721 | |
---|
[3678] | 722 | INQUIRE(FILE=filename, EXIST=file_present) |
---|
[3182] | 723 | |
---|
| 724 | END FUNCTION file_present |
---|
| 725 | |
---|
| 726 | |
---|
[2696] | 727 | !------------------------------------------------------------------------------! |
---|
| 728 | ! Description: |
---|
| 729 | ! ------------ |
---|
[3557] | 730 | !> This routine initializes the dynamic driver file, i.e. INIFOR's netCDF output |
---|
| 731 | !> file. |
---|
[2696] | 732 | !> |
---|
| 733 | !> Besides writing metadata, such as global attributes, coordinates, variables, |
---|
[3557] | 734 | !> in the netCDF file, various netCDF IDs are saved for later, when INIFOR |
---|
[2696] | 735 | !> writes the actual data. |
---|
| 736 | !------------------------------------------------------------------------------! |
---|
[3182] | 737 | SUBROUTINE setup_netcdf_dimensions(output_file, palm_grid, & |
---|
| 738 | start_date_string, origin_lon, origin_lat) |
---|
[2696] | 739 | |
---|
| 740 | TYPE(nc_file), INTENT(INOUT) :: output_file |
---|
| 741 | TYPE(grid_definition), INTENT(IN) :: palm_grid |
---|
[3182] | 742 | CHARACTER (LEN=DATE), INTENT(IN) :: start_date_string |
---|
| 743 | REAL(dp), INTENT(IN) :: origin_lon, origin_lat |
---|
[2696] | 744 | |
---|
[3182] | 745 | CHARACTER (LEN=8) :: date_string |
---|
| 746 | CHARACTER (LEN=10) :: time_string |
---|
| 747 | CHARACTER (LEN=5) :: zone_string |
---|
| 748 | CHARACTER (LEN=SNAME) :: history_string |
---|
[2696] | 749 | INTEGER :: ncid, nx, ny, nz, nt, dimids(3), dimvarids(3) |
---|
| 750 | REAL(dp) :: z0 |
---|
| 751 | |
---|
[3182] | 752 | message = "Initializing PALM-4U dynamic driver file '" // & |
---|
| 753 | TRIM(output_file % name) // "' and setting up dimensions." |
---|
| 754 | CALL report('setup_netcdf_dimensions', message) |
---|
| 755 | |
---|
[3557] | 756 | ! |
---|
| 757 | !-- Create the netCDF file as in netCDF-4/HDF5 format if __netcdf4 preprocessor flag is given |
---|
[3182] | 758 | #if defined( __netcdf4 ) |
---|
[2696] | 759 | CALL check(nf90_create(TRIM(output_file % name), OR(NF90_CLOBBER, NF90_HDF5), ncid)) |
---|
[3182] | 760 | #else |
---|
| 761 | CALL check(nf90_create(TRIM(output_file % name), NF90_CLOBBER, ncid)) |
---|
| 762 | #endif |
---|
[2696] | 763 | |
---|
[3395] | 764 | !------------------------------------------------------------------------------ |
---|
| 765 | !- Section 1: Define NetCDF dimensions and coordinates |
---|
| 766 | !------------------------------------------------------------------------------ |
---|
| 767 | nt = SIZE(output_file % time) |
---|
| 768 | nx = palm_grid % nx |
---|
| 769 | ny = palm_grid % ny |
---|
| 770 | nz = palm_grid % nz |
---|
| 771 | z0 = palm_grid % z0 |
---|
| 772 | |
---|
| 773 | |
---|
[2696] | 774 | ! |
---|
| 775 | !------------------------------------------------------------------------------ |
---|
[3395] | 776 | !- Section 2: Write global NetCDF attributes |
---|
[2696] | 777 | !------------------------------------------------------------------------------ |
---|
[3182] | 778 | CALL date_and_time(DATE=date_string, TIME=time_string, ZONE=zone_string) |
---|
| 779 | history_string = & |
---|
| 780 | 'Created on '// date_string // & |
---|
| 781 | ' at ' // time_string(1:2) // ':' // time_string(3:4) // & |
---|
| 782 | ' (UTC' // zone_string // ')' |
---|
| 783 | |
---|
[2696] | 784 | CALL check(nf90_put_att(ncid, NF90_GLOBAL, 'title', 'PALM input file for scenario ...')) |
---|
| 785 | CALL check(nf90_put_att(ncid, NF90_GLOBAL, 'institution', 'Deutscher Wetterdienst, Offenbach')) |
---|
| 786 | CALL check(nf90_put_att(ncid, NF90_GLOBAL, 'author', 'Eckhard Kadasch, eckhard.kadasch@dwd.de')) |
---|
[3182] | 787 | CALL check(nf90_put_att(ncid, NF90_GLOBAL, 'history', TRIM(history_string))) |
---|
[2696] | 788 | CALL check(nf90_put_att(ncid, NF90_GLOBAL, 'references', '--')) |
---|
| 789 | CALL check(nf90_put_att(ncid, NF90_GLOBAL, 'comment', '--')) |
---|
[3182] | 790 | CALL check(nf90_put_att(ncid, NF90_GLOBAL, 'origin_lat', TRIM(real_to_str(origin_lat*TO_DEGREES, '(F18.13)')))) |
---|
| 791 | CALL check(nf90_put_att(ncid, NF90_GLOBAL, 'origin_lon', TRIM(real_to_str(origin_lon*TO_DEGREES, '(F18.13)')))) |
---|
[3557] | 792 | ! |
---|
| 793 | !-- FIXME: This is the elevation relative to COSMO-DE/D2 sea level and does |
---|
| 794 | !-- FIXME: not necessarily comply with DHHN2016 (c.f. PALM Input Data |
---|
| 795 | !-- FIXME: Standard v1.9., origin_z) |
---|
[3395] | 796 | CALL check(nf90_put_att(ncid, NF90_GLOBAL, 'origin_z', TRIM(real_to_str(z0, '(F18.13)')))) |
---|
[2696] | 797 | CALL check(nf90_put_att(ncid, NF90_GLOBAL, 'inifor_version', TRIM(VERSION))) |
---|
| 798 | CALL check(nf90_put_att(ncid, NF90_GLOBAL, 'palm_version', '--')) |
---|
| 799 | |
---|
| 800 | ! |
---|
| 801 | ! |
---|
| 802 | !------------------------------------------------------------------------------ |
---|
| 803 | !- Section 2a: Define dimensions for cell centers (scalars in soil and atmosph.) |
---|
| 804 | !------------------------------------------------------------------------------ |
---|
[3557] | 805 | ! |
---|
| 806 | !-- reset dimids first |
---|
| 807 | dimids = (/0, 0, 0/) |
---|
| 808 | CALL check( nf90_def_dim(ncid, "x", nx+1, dimids(1)) ) |
---|
| 809 | CALL check( nf90_def_dim(ncid, "y", ny+1, dimids(2)) ) |
---|
| 810 | CALL check( nf90_def_dim(ncid, "z", nz, dimids(3)) ) |
---|
| 811 | ! |
---|
| 812 | !-- save dimids for later |
---|
| 813 | output_file % dimids_scl = dimids |
---|
[2696] | 814 | |
---|
[3557] | 815 | ! |
---|
| 816 | !-- reset dimvarids first |
---|
| 817 | dimvarids = (/0, 0, 0/) |
---|
| 818 | CALL check(nf90_def_var(ncid, "x", NF90_FLOAT, dimids(1), dimvarids(1))) |
---|
| 819 | CALL check(nf90_put_att(ncid, dimvarids(1), "standard_name", "x coordinate of cell centers")) |
---|
| 820 | CALL check(nf90_put_att(ncid, dimvarids(1), "units", "m")) |
---|
[2696] | 821 | |
---|
[3557] | 822 | CALL check(nf90_def_var(ncid, "y", NF90_FLOAT, dimids(2), dimvarids(2))) |
---|
| 823 | CALL check(nf90_put_att(ncid, dimvarids(2), "standard_name", "y coordinate of cell centers")) |
---|
| 824 | CALL check(nf90_put_att(ncid, dimvarids(2), "units", "m")) |
---|
[2696] | 825 | |
---|
[3557] | 826 | CALL check(nf90_def_var(ncid, "z", NF90_FLOAT, dimids(3), dimvarids(3))) |
---|
| 827 | CALL check(nf90_put_att(ncid, dimvarids(3), "standard_name", "z coordinate of cell centers")) |
---|
| 828 | CALL check(nf90_put_att(ncid, dimvarids(3), "units", "m")) |
---|
| 829 | ! |
---|
| 830 | !-- save dimvarids for later |
---|
| 831 | output_file % dimvarids_scl = dimvarids |
---|
[2696] | 832 | |
---|
[3557] | 833 | ! |
---|
| 834 | !-- overwrite third dimid with the one of depth |
---|
[3182] | 835 | CALL check(nf90_def_dim(ncid, "zsoil", SIZE(palm_grid % depths), dimids(3)) ) |
---|
[3557] | 836 | ! |
---|
| 837 | !-- save dimids for later |
---|
| 838 | output_file % dimids_soil = dimids |
---|
[2696] | 839 | |
---|
[3557] | 840 | ! |
---|
| 841 | !-- overwrite third dimvarid with the one of depth |
---|
[3182] | 842 | CALL check(nf90_def_var(ncid, "zsoil", NF90_FLOAT, output_file % dimids_soil(3), dimvarids(3))) |
---|
[2696] | 843 | CALL check(nf90_put_att(ncid, dimvarids(3), "standard_name", "depth_below_land")) |
---|
| 844 | CALL check(nf90_put_att(ncid, dimvarids(3), "positive", "down")) |
---|
| 845 | CALL check(nf90_put_att(ncid, dimvarids(3), "units", "m")) |
---|
| 846 | ! |
---|
[3557] | 847 | !-- save dimvarids for later |
---|
| 848 | output_file % dimvarids_soil = dimvarids |
---|
| 849 | ! |
---|
[2696] | 850 | !------------------------------------------------------------------------------ |
---|
| 851 | !- Section 2b: Define dimensions for cell faces/velocities |
---|
| 852 | !------------------------------------------------------------------------------ |
---|
[3557] | 853 | ! |
---|
| 854 | !-- reset dimids first |
---|
| 855 | dimids = (/0, 0, 0/) |
---|
| 856 | CALL check(nf90_def_dim(ncid, "xu", nx, dimids(1)) ) |
---|
| 857 | CALL check(nf90_def_dim(ncid, "yv", ny, dimids(2)) ) |
---|
| 858 | CALL check(nf90_def_dim(ncid, "zw", nz-1, dimids(3)) ) |
---|
| 859 | ! |
---|
| 860 | !-- save dimids for later |
---|
| 861 | output_file % dimids_vel = dimids |
---|
[2696] | 862 | |
---|
[3557] | 863 | ! |
---|
| 864 | !-- reset dimvarids first |
---|
| 865 | dimvarids = (/0, 0, 0/) |
---|
| 866 | CALL check(nf90_def_var(ncid, "xu", NF90_FLOAT, dimids(1), dimvarids(1))) |
---|
| 867 | CALL check(nf90_put_att(ncid, dimvarids(1), "standard_name", "x coordinate of cell faces")) |
---|
| 868 | CALL check(nf90_put_att(ncid, dimvarids(1), "units", "m")) |
---|
[2696] | 869 | |
---|
[3557] | 870 | CALL check(nf90_def_var(ncid, "yv", NF90_FLOAT, dimids(2), dimvarids(2))) |
---|
| 871 | CALL check(nf90_put_att(ncid, dimvarids(2), "standard_name", "y coordinate of cell faces")) |
---|
| 872 | CALL check(nf90_put_att(ncid, dimvarids(2), "units", "m")) |
---|
[2696] | 873 | |
---|
[3557] | 874 | CALL check(nf90_def_var(ncid, "zw", NF90_FLOAT, dimids(3), dimvarids(3))) |
---|
| 875 | CALL check(nf90_put_att(ncid, dimvarids(3), "standard_name", "z coordinate of cell faces")) |
---|
| 876 | CALL check(nf90_put_att(ncid, dimvarids(3), "units", "m")) |
---|
| 877 | ! |
---|
| 878 | !-- save dimvarids for later |
---|
| 879 | output_file % dimvarids_vel = dimvarids |
---|
[2696] | 880 | |
---|
| 881 | ! |
---|
| 882 | !------------------------------------------------------------------------------ |
---|
| 883 | !- Section 2c: Define time dimension |
---|
| 884 | !------------------------------------------------------------------------------ |
---|
| 885 | CALL check(nf90_def_dim(ncid, "time", nt, output_file % dimid_time) ) |
---|
| 886 | CALL check(nf90_def_var(ncid, "time", NF90_FLOAT, & |
---|
| 887 | output_file % dimid_time, & |
---|
| 888 | output_file % dimvarid_time)) |
---|
| 889 | CALL check(nf90_put_att(ncid, output_file % dimvarid_time, "standard_name", "time")) |
---|
| 890 | CALL check(nf90_put_att(ncid, output_file % dimvarid_time, "long_name", "time")) |
---|
[3182] | 891 | CALL check(nf90_put_att(ncid, output_file % dimvarid_time, "units", & |
---|
| 892 | "seconds since " // start_date_string // " UTC")) |
---|
[2696] | 893 | |
---|
| 894 | CALL check(nf90_enddef(ncid)) |
---|
| 895 | |
---|
| 896 | ! |
---|
| 897 | !------------------------------------------------------------------------------ |
---|
| 898 | !- Section 3: Write grid coordinates |
---|
| 899 | !------------------------------------------------------------------------------ |
---|
| 900 | CALL check(nf90_put_var(ncid, output_file % dimvarids_scl(1), palm_grid%x)) |
---|
| 901 | CALL check(nf90_put_var(ncid, output_file % dimvarids_scl(2), palm_grid%y)) |
---|
| 902 | CALL check(nf90_put_var(ncid, output_file % dimvarids_scl(3), palm_grid%z)) |
---|
| 903 | |
---|
| 904 | CALL check(nf90_put_var(ncid, output_file % dimvarids_vel(1), palm_grid%xu)) |
---|
| 905 | CALL check(nf90_put_var(ncid, output_file % dimvarids_vel(2), palm_grid%yv)) |
---|
| 906 | CALL check(nf90_put_var(ncid, output_file % dimvarids_vel(3), palm_grid%zw)) |
---|
| 907 | |
---|
[3557] | 908 | ! |
---|
| 909 | !-- TODO Read in soil depths from input file before this. |
---|
[2696] | 910 | CALL check(nf90_put_var(ncid, output_file % dimvarids_soil(3), palm_grid%depths)) |
---|
| 911 | |
---|
[3557] | 912 | ! |
---|
| 913 | !-- Write time vector |
---|
[2696] | 914 | CALL check(nf90_put_var(ncid, output_file % dimvarid_time, output_file % time)) |
---|
| 915 | |
---|
[3557] | 916 | ! |
---|
| 917 | !-- Close the file |
---|
[2696] | 918 | CALL check(nf90_close(ncid)) |
---|
| 919 | |
---|
| 920 | END SUBROUTINE setup_netcdf_dimensions |
---|
| 921 | |
---|
| 922 | |
---|
[3557] | 923 | !------------------------------------------------------------------------------! |
---|
| 924 | ! Description: |
---|
| 925 | ! ------------ |
---|
| 926 | !> Defines the netCDF variables to be written to the dynamic driver file |
---|
| 927 | !------------------------------------------------------------------------------! |
---|
[3456] | 928 | SUBROUTINE setup_netcdf_variables(filename, output_variable_table, debug) |
---|
[2696] | 929 | |
---|
| 930 | CHARACTER (LEN=*), INTENT(IN) :: filename |
---|
| 931 | TYPE(nc_var), INTENT(INOUT), TARGET :: output_variable_table(:) |
---|
[3456] | 932 | LOGICAL, INTENT(IN) :: debug |
---|
| 933 | |
---|
[2696] | 934 | TYPE(nc_var), POINTER :: var |
---|
| 935 | INTEGER :: i, ncid |
---|
[3456] | 936 | LOGICAL :: to_be_written |
---|
[2696] | 937 | |
---|
[3182] | 938 | message = "Defining variables in dynamic driver '" // TRIM(filename) // "'." |
---|
[2696] | 939 | CALL report('setup_netcdf_variables', message) |
---|
| 940 | |
---|
| 941 | CALL check(nf90_open(TRIM(filename), NF90_WRITE, ncid)) |
---|
| 942 | CALL check(nf90_redef(ncid)) |
---|
| 943 | |
---|
| 944 | DO i = 1, SIZE(output_variable_table) |
---|
| 945 | |
---|
| 946 | var => output_variable_table(i) |
---|
| 947 | |
---|
[3456] | 948 | to_be_written = ( var % to_be_processed .AND. .NOT. var % is_internal) .OR. & |
---|
| 949 | ( var % is_internal .AND. debug ) |
---|
| 950 | |
---|
| 951 | IF ( to_be_written ) THEN |
---|
[3182] | 952 | message = " variable #" // TRIM(str(i)) // " '" // TRIM(var%name) // "'." |
---|
[2696] | 953 | CALL report('setup_netcdf_variables', message) |
---|
| 954 | |
---|
| 955 | CALL netcdf_define_variable(var, ncid) |
---|
| 956 | CALL netcdf_get_dimensions(var, ncid) |
---|
| 957 | END IF |
---|
| 958 | |
---|
| 959 | END DO |
---|
| 960 | |
---|
| 961 | CALL check(nf90_enddef(ncid)) |
---|
| 962 | CALL check(nf90_close(ncid)) |
---|
| 963 | |
---|
[3182] | 964 | message = "Dynamic driver '" // TRIM(filename) // "' initialized successfully." |
---|
[2696] | 965 | CALL report('setup_netcdf_variables', message) |
---|
| 966 | |
---|
| 967 | END SUBROUTINE setup_netcdf_variables |
---|
| 968 | |
---|
| 969 | |
---|
| 970 | !------------------------------------------------------------------------------! |
---|
| 971 | ! Description: |
---|
| 972 | ! ------------ |
---|
| 973 | !> This routine reads and returns all input variables of the given IO group |
---|
| 974 | !> It accomodates the data by allocating a container variable that represents a |
---|
| 975 | !> list of arrays of the same length as the groups variable list. (This list |
---|
| 976 | !> will typically contain one or two items.) After the container, its members |
---|
| 977 | !> are allocated one by one with the appropriate, possibly different, |
---|
| 978 | !> dimensions. |
---|
| 979 | !> |
---|
| 980 | !> The 'group' is an INTENT(INOUT) variable so that 'get_netcdf_variable()' can |
---|
| 981 | !> record netCDF IDs in the 'in_var_list()' member variable. |
---|
| 982 | !------------------------------------------------------------------------------! |
---|
| 983 | SUBROUTINE read_input_variables(group, iter, buffer) |
---|
| 984 | TYPE(io_group), INTENT(INOUT), TARGET :: group |
---|
| 985 | INTEGER, INTENT(IN) :: iter |
---|
| 986 | TYPE(container), ALLOCATABLE, INTENT(INOUT) :: buffer(:) |
---|
| 987 | INTEGER :: hour, buf_id |
---|
| 988 | TYPE(nc_var), POINTER :: input_var |
---|
| 989 | CHARACTER(LEN=PATH), POINTER :: input_file |
---|
| 990 | INTEGER :: ivar, nbuffers |
---|
| 991 | |
---|
| 992 | message = "Reading data for I/O group '" // TRIM(group % in_var_list(1) % name) // "'." |
---|
| 993 | CALL report('read_input_variables', message) |
---|
| 994 | |
---|
| 995 | input_file => group % in_files(iter) |
---|
| 996 | |
---|
| 997 | ! |
---|
| 998 | !------------------------------------------------------------------------------ |
---|
| 999 | !- Section 1: Load input buffers for accumulated variables |
---|
| 1000 | !------------------------------------------------------------------------------ |
---|
[3557] | 1001 | ! |
---|
| 1002 | !-- radiation budgets, precipitation |
---|
[2696] | 1003 | IF (group % kind == 'running average' .OR. & |
---|
[3557] | 1004 | group % kind == 'accumulated') THEN |
---|
[2696] | 1005 | |
---|
| 1006 | IF (SIZE(group % in_var_list) .GT. 1 ) THEN |
---|
| 1007 | message = "I/O groups may not contain more than one " // & |
---|
| 1008 | "accumulated variable. Group '" // TRIM(group % kind) //& |
---|
| 1009 | "' contains " // & |
---|
| 1010 | TRIM( str(SIZE(group % in_var_list)) ) // "." |
---|
[3615] | 1011 | CALL inifor_abort('read_input_variables | accumulation', message) |
---|
[2696] | 1012 | END IF |
---|
| 1013 | |
---|
[3557] | 1014 | ! |
---|
| 1015 | !-- use two buffer arrays |
---|
[2696] | 1016 | nbuffers = 2 |
---|
| 1017 | IF ( .NOT. ALLOCATED( buffer ) ) ALLOCATE( buffer(nbuffers) ) |
---|
| 1018 | |
---|
[3557] | 1019 | ! |
---|
| 1020 | !-- hour of the day |
---|
| 1021 | hour = iter - 1 |
---|
| 1022 | ! |
---|
| 1023 | !-- chose correct buffer array |
---|
[2696] | 1024 | buf_id = select_buffer(hour) |
---|
| 1025 | |
---|
| 1026 | CALL run_control('time', 'read') |
---|
| 1027 | IF ( ALLOCATED(buffer(buf_id) % array) ) DEALLOCATE(buffer(buf_id) % array) |
---|
| 1028 | CALL run_control('time', 'alloc') |
---|
| 1029 | |
---|
| 1030 | input_var => group % in_var_list(1) |
---|
[3182] | 1031 | CALL get_netcdf_variable(input_file, input_var, buffer(buf_id) % array) |
---|
[2696] | 1032 | CALL report('read_input_variables', "Read accumulated " // TRIM(group % in_var_list(1) % name)) |
---|
| 1033 | |
---|
| 1034 | IF ( input_var % is_upside_down ) CALL reverse(buffer(buf_id) % array) |
---|
| 1035 | CALL run_control('time', 'comp') |
---|
| 1036 | |
---|
| 1037 | !------------------------------------------------------------------------------ |
---|
| 1038 | !- Section 2: Load input buffers for normal I/O groups |
---|
| 1039 | !------------------------------------------------------------------------------ |
---|
| 1040 | ELSE |
---|
| 1041 | |
---|
[3557] | 1042 | ! |
---|
| 1043 | !-- Allocate one input buffer per input_variable. If more quantities |
---|
| 1044 | !-- have to be computed than input variables exist in this group, |
---|
| 1045 | !-- allocate more buffers. For instance, in the thermodynamics group, |
---|
| 1046 | !-- there are three input variabels (PP, T, Qv) and four quantities |
---|
| 1047 | !-- necessart (P, Theta, Rho, qv) for the corresponding output fields |
---|
| 1048 | !-- (p0, Theta, qv, ug, and vg) |
---|
[3395] | 1049 | nbuffers = MAX( group % n_inputs, group % n_output_quantities ) |
---|
[2696] | 1050 | ALLOCATE( buffer(nbuffers) ) |
---|
| 1051 | CALL run_control('time', 'alloc') |
---|
| 1052 | |
---|
[3557] | 1053 | ! |
---|
| 1054 | !-- Read in all input variables, leave extra buffers-if any-untouched. |
---|
[3395] | 1055 | DO ivar = 1, group % n_inputs |
---|
[2696] | 1056 | |
---|
| 1057 | input_var => group % in_var_list(ivar) |
---|
| 1058 | |
---|
[3557] | 1059 | ! |
---|
| 1060 | ! Check wheather P or PP is present in input file |
---|
[2696] | 1061 | IF (input_var % name == 'P') THEN |
---|
[3395] | 1062 | input_var % name = TRIM( get_pressure_varname(input_file) ) |
---|
[2696] | 1063 | CALL run_control('time', 'read') |
---|
| 1064 | END IF |
---|
| 1065 | |
---|
[3182] | 1066 | CALL get_netcdf_variable(input_file, input_var, buffer(ivar) % array) |
---|
[2696] | 1067 | |
---|
| 1068 | IF ( input_var % is_upside_down ) CALL reverse(buffer(ivar) % array) |
---|
| 1069 | CALL run_control('time', 'comp') |
---|
| 1070 | |
---|
| 1071 | END DO |
---|
| 1072 | END IF |
---|
| 1073 | |
---|
| 1074 | END SUBROUTINE read_input_variables |
---|
| 1075 | |
---|
| 1076 | |
---|
[3557] | 1077 | !------------------------------------------------------------------------------! |
---|
| 1078 | ! Description: |
---|
| 1079 | ! ------------ |
---|
| 1080 | !> Select the appropriate buffer ID for accumulated COSMO input variables |
---|
| 1081 | !> depending on the current hour. |
---|
| 1082 | !------------------------------------------------------------------------------! |
---|
[2696] | 1083 | INTEGER FUNCTION select_buffer(hour) |
---|
| 1084 | INTEGER, INTENT(IN) :: hour |
---|
| 1085 | INTEGER :: step |
---|
| 1086 | |
---|
| 1087 | select_buffer = 0 |
---|
| 1088 | step = MODULO(hour, 3) + 1 |
---|
| 1089 | |
---|
| 1090 | SELECT CASE(step) |
---|
| 1091 | CASE(1, 3) |
---|
| 1092 | select_buffer = 1 |
---|
| 1093 | CASE(2) |
---|
| 1094 | select_buffer = 2 |
---|
| 1095 | CASE DEFAULT |
---|
| 1096 | message = "Invalid step '" // TRIM(str(step)) |
---|
[3615] | 1097 | CALL inifor_abort('select_buffer', message) |
---|
[2696] | 1098 | END SELECT |
---|
| 1099 | END FUNCTION select_buffer |
---|
| 1100 | |
---|
| 1101 | |
---|
| 1102 | !------------------------------------------------------------------------------! |
---|
| 1103 | ! Description: |
---|
| 1104 | ! ------------ |
---|
| 1105 | !> Checks if the input_file contains the absolute pressure, 'P', or the pressure |
---|
| 1106 | !> perturbation, 'PP', and returns the appropriate string. |
---|
| 1107 | !------------------------------------------------------------------------------! |
---|
[3395] | 1108 | CHARACTER(LEN=2) FUNCTION get_pressure_varname(input_file) RESULT(var) |
---|
[2696] | 1109 | CHARACTER(LEN=*) :: input_file |
---|
| 1110 | INTEGER :: ncid, varid |
---|
| 1111 | |
---|
| 1112 | CALL check(nf90_open( TRIM(input_file), NF90_NOWRITE, ncid )) |
---|
| 1113 | IF ( nf90_inq_varid( ncid, 'P', varid ) .EQ. NF90_NOERR ) THEN |
---|
| 1114 | |
---|
| 1115 | var = 'P' |
---|
| 1116 | |
---|
| 1117 | ELSE IF ( nf90_inq_varid( ncid, 'PP', varid ) .EQ. NF90_NOERR ) THEN |
---|
| 1118 | |
---|
| 1119 | var = 'PP' |
---|
| 1120 | CALL report('get_pressure_var', 'Using PP instead of P') |
---|
| 1121 | |
---|
| 1122 | ELSE |
---|
| 1123 | |
---|
| 1124 | message = "Failed to read '" // TRIM(var) // & |
---|
| 1125 | "' from file '" // TRIM(input_file) // "'." |
---|
[3615] | 1126 | CALL inifor_abort('get_pressure_var', message) |
---|
[2696] | 1127 | |
---|
| 1128 | END IF |
---|
| 1129 | |
---|
| 1130 | CALL check(nf90_close(ncid)) |
---|
| 1131 | |
---|
[3395] | 1132 | END FUNCTION get_pressure_varname |
---|
[2696] | 1133 | |
---|
| 1134 | |
---|
[3557] | 1135 | !------------------------------------------------------------------------------! |
---|
| 1136 | ! Description: |
---|
| 1137 | ! ------------ |
---|
| 1138 | !> Read the given global attribute form the given netCDF file. |
---|
| 1139 | !------------------------------------------------------------------------------! |
---|
[2696] | 1140 | FUNCTION get_netcdf_attribute(filename, attribute) RESULT(attribute_value) |
---|
| 1141 | |
---|
| 1142 | CHARACTER(LEN=*), INTENT(IN) :: filename, attribute |
---|
| 1143 | REAL(dp) :: attribute_value |
---|
| 1144 | |
---|
[3557] | 1145 | INTEGER :: ncid |
---|
[2696] | 1146 | |
---|
| 1147 | IF ( nf90_open( TRIM(filename), NF90_NOWRITE, ncid ) == NF90_NOERR ) THEN |
---|
| 1148 | |
---|
| 1149 | CALL check(nf90_get_att(ncid, NF90_GLOBAL, TRIM(attribute), attribute_value)) |
---|
[3182] | 1150 | CALL check(nf90_close(ncid)) |
---|
[2696] | 1151 | |
---|
| 1152 | ELSE |
---|
| 1153 | |
---|
| 1154 | message = "Failed to read '" // TRIM(attribute) // & |
---|
| 1155 | "' from file '" // TRIM(filename) // "'." |
---|
[3615] | 1156 | CALL inifor_abort('get_netcdf_attribute', message) |
---|
[2696] | 1157 | |
---|
| 1158 | END IF |
---|
| 1159 | |
---|
| 1160 | END FUNCTION get_netcdf_attribute |
---|
| 1161 | |
---|
| 1162 | |
---|
[3557] | 1163 | |
---|
| 1164 | !------------------------------------------------------------------------------! |
---|
| 1165 | ! Description: |
---|
| 1166 | ! ------------ |
---|
| 1167 | !> Updates the dynamic driver with the interpolated field of the current |
---|
| 1168 | !> variable at the current time step. |
---|
| 1169 | !------------------------------------------------------------------------------! |
---|
[3456] | 1170 | SUBROUTINE update_output(var, array, iter, output_file, cfg) |
---|
[2696] | 1171 | TYPE(nc_var), INTENT(IN) :: var |
---|
| 1172 | REAL(dp), INTENT(IN) :: array(:,:,:) |
---|
| 1173 | INTEGER, INTENT(IN) :: iter |
---|
| 1174 | TYPE(nc_file), INTENT(IN) :: output_file |
---|
[3456] | 1175 | TYPE(inifor_config) :: cfg |
---|
[2696] | 1176 | |
---|
| 1177 | INTEGER :: ncid, ndim, start(4), count(4) |
---|
| 1178 | LOGICAL :: var_is_time_dependent |
---|
| 1179 | |
---|
| 1180 | var_is_time_dependent = ( & |
---|
| 1181 | var % dimids( var % ndim ) == output_file % dimid_time & |
---|
| 1182 | ) |
---|
| 1183 | |
---|
[3557] | 1184 | ! |
---|
| 1185 | !-- Skip time dimension for output |
---|
[3182] | 1186 | ndim = var % ndim |
---|
| 1187 | IF ( var_is_time_dependent ) ndim = var % ndim - 1 |
---|
[2696] | 1188 | |
---|
| 1189 | start(:) = (/1,1,1,1/) |
---|
| 1190 | start(ndim+1) = iter |
---|
| 1191 | count(1:ndim) = var%dimlen(1:ndim) |
---|
| 1192 | |
---|
| 1193 | CALL check(nf90_open(output_file % name, NF90_WRITE, ncid)) |
---|
| 1194 | |
---|
[3557] | 1195 | ! |
---|
| 1196 | !-- Reduce dimension of output array according to variable kind |
---|
[2696] | 1197 | SELECT CASE (TRIM(var % kind)) |
---|
| 1198 | |
---|
| 1199 | CASE ( 'init scalar profile', 'init u profile', 'init v profile', & |
---|
| 1200 | 'init w profile' ) |
---|
| 1201 | |
---|
| 1202 | CALL check(nf90_put_var( ncid, var%varid, array(1,1,:) ) ) |
---|
| 1203 | |
---|
| 1204 | CASE ( 'init soil', 'init scalar', 'init u', 'init v', 'init w' ) |
---|
| 1205 | |
---|
| 1206 | CALL check(nf90_put_var( ncid, var%varid, array(:,:,:) ) ) |
---|
| 1207 | |
---|
| 1208 | CASE( 'left scalar', 'right scalar', 'left w', 'right w' ) |
---|
| 1209 | |
---|
| 1210 | CALL check(nf90_put_var( ncid, var%varid, array(1,:,:), & |
---|
| 1211 | start=start(1:ndim+1), & |
---|
| 1212 | count=count(1:ndim) ) ) |
---|
| 1213 | |
---|
| 1214 | |
---|
| 1215 | IF (.NOT. SIZE(array, 2) .EQ. var % dimlen(1)) THEN |
---|
| 1216 | PRINT *, "inifor: update_output: Dimension ", 1, " of variable ", & |
---|
| 1217 | TRIM(var % name), " (", var % dimlen(1), & |
---|
| 1218 | ") does not match the dimension of the output array (", & |
---|
| 1219 | SIZE(array, 2), ")." |
---|
| 1220 | STOP |
---|
| 1221 | END IF |
---|
| 1222 | |
---|
| 1223 | |
---|
| 1224 | CASE( 'north scalar', 'south scalar', 'north w', 'south w' ) |
---|
| 1225 | |
---|
| 1226 | CALL check(nf90_put_var( ncid, var%varid, array(:,1,:), & |
---|
| 1227 | start=start(1:ndim+1), & |
---|
| 1228 | count=count(1:ndim) ) ) |
---|
| 1229 | |
---|
| 1230 | |
---|
| 1231 | CASE( 'surface forcing', 'top scalar', 'top w' ) |
---|
| 1232 | |
---|
| 1233 | CALL check(nf90_put_var( ncid, var%varid, array(:,:,1), & |
---|
| 1234 | start=start(1:ndim+1), & |
---|
| 1235 | count=count(1:ndim) ) ) |
---|
| 1236 | |
---|
| 1237 | CASE ( 'left u', 'right u', 'left v', 'right v' ) |
---|
| 1238 | |
---|
| 1239 | CALL check(nf90_put_var( ncid, var%varid, array(1,:,:), & |
---|
| 1240 | start=start(1:ndim+1), & |
---|
| 1241 | count=count(1:ndim) ) ) |
---|
| 1242 | |
---|
| 1243 | CASE ( 'north u', 'south u', 'north v', 'south v' ) |
---|
| 1244 | |
---|
| 1245 | CALL check(nf90_put_var( ncid, var%varid, array(:,1,:), & |
---|
| 1246 | start=start(1:ndim+1), & |
---|
| 1247 | count=count(1:ndim) ) ) |
---|
| 1248 | |
---|
| 1249 | CASE ( 'top u', 'top v' ) |
---|
| 1250 | |
---|
| 1251 | CALL check(nf90_put_var( ncid, var%varid, array(:,:,1), & |
---|
| 1252 | start=start(1:ndim+1), & |
---|
| 1253 | count=count(1:ndim) ) ) |
---|
| 1254 | |
---|
| 1255 | CASE ( 'time series' ) |
---|
| 1256 | |
---|
| 1257 | CALL check(nf90_put_var( ncid, var%varid, array(1,1,1), & |
---|
| 1258 | start=start(1:ndim+1) ) ) |
---|
| 1259 | |
---|
[3456] | 1260 | CASE ( 'constant scalar profile', 'geostrophic' ) |
---|
[2696] | 1261 | |
---|
| 1262 | CALL check(nf90_put_var( ncid, var%varid, array(1,1,:), & |
---|
| 1263 | start=start(1:ndim+1), & |
---|
| 1264 | count=count(1:ndim) ) ) |
---|
| 1265 | |
---|
[3456] | 1266 | CASE ( 'internal profile' ) |
---|
| 1267 | |
---|
| 1268 | IF ( cfg % debug ) THEN |
---|
| 1269 | CALL check(nf90_put_var( ncid, var%varid, array(1,1,:), & |
---|
| 1270 | start=start(1:ndim+1), & |
---|
| 1271 | count=count(1:ndim) ) ) |
---|
| 1272 | END IF |
---|
| 1273 | |
---|
[3182] | 1274 | CASE ( 'large-scale scalar forcing', 'large-scale w forcing' ) |
---|
| 1275 | |
---|
| 1276 | message = "Doing nothing in terms of writing large-scale forings." |
---|
| 1277 | CALL report('update_output', message) |
---|
| 1278 | |
---|
[2696] | 1279 | CASE DEFAULT |
---|
| 1280 | |
---|
| 1281 | message = "Variable kind '" // TRIM(var % kind) // & |
---|
| 1282 | "' not recognized." |
---|
[3615] | 1283 | CALL inifor_abort('update_output', message) |
---|
[2696] | 1284 | |
---|
| 1285 | END SELECT |
---|
| 1286 | |
---|
| 1287 | CALL check(nf90_close(ncid)) |
---|
| 1288 | |
---|
| 1289 | END SUBROUTINE update_output |
---|
| 1290 | |
---|
| 1291 | |
---|
[3557] | 1292 | !------------------------------------------------------------------------------! |
---|
| 1293 | ! Description: |
---|
| 1294 | ! ------------ |
---|
| 1295 | !> Checks the status of a netCDF API call and aborts if an error occured |
---|
| 1296 | !------------------------------------------------------------------------------! |
---|
[2696] | 1297 | SUBROUTINE check(status) |
---|
| 1298 | |
---|
| 1299 | INTEGER, INTENT(IN) :: status |
---|
| 1300 | |
---|
| 1301 | IF (status /= nf90_noerr) THEN |
---|
| 1302 | message = "NetCDF API call failed with error: " // & |
---|
| 1303 | TRIM( nf90_strerror(status) ) |
---|
[3615] | 1304 | CALL inifor_abort('io.check', message) |
---|
[2696] | 1305 | END IF |
---|
| 1306 | |
---|
| 1307 | END SUBROUTINE check |
---|
| 1308 | |
---|
[3618] | 1309 | END MODULE inifor_io |
---|
[3680] | 1310 | #endif |
---|