Home

Context Navigation

source: palm/trunk/UTIL/combine_plot_fields.f90 @ 196

Last change on this file since 196 was 191, checked in by raasch, 16 years ago
further adjustments and bugfixes for SGI system
Property svn:keywords set to `Id`
File size: 26.2 KB

Rev	Line
[1]	1	PROGRAM combine_plot_fields
	2
	3	!------------------------------------------------------------------------------!
	4	! Actual revisions:
	5	! -----------------
[191]	6	! Subdomain data are read into temporary arrays pf_tmp/pf3d_tmp in order to
	7	! avoid INTEL compiler warnings about (automatic) creation of temporary arrays
[179]	8	! Bugfix: three misplaced #endif directives
[1]	9	!
	10	! Former revisions:
	11	! -----------------
[114]	12	! $Id: combine_plot_fields.f90 191 2008-08-27 14:34:51Z raasch $
	13	!
[139]	14	! 114 2007-10-10 00:03:15Z raasch
	15	! Bugfix: model_string needed a default value
	16	!
[114]	17	! Aug 07 Loop for processing of output by coupled runs, id_string does not
	18	! contain modus any longer
	19	!
[1]	20	! 18/01/06 Output of time-averaged data
	21	!
	22	! 25/05/05 Errors removed
	23	!
	24	! 26/04/05 Output in NetCDF format, iso2d and avs output only if parameter
	25	! file exists
	26	!
	27	! 31/10/01 All comments and messages translated into English
	28	!
	29	! 23/02/99 Keine Bearbeitung komprimierter 3D-Daten
	30	! Ursprungsversion vom 28/07/97
	31	!
	32	!
	33	! Description:
	34	! ------------
	35	! This routine combines data of the PALM-subdomains into one file. In PALM
	36	! every processor element opens its own file and writes 2D- or 3D-binary-data
	37	! into it (different files are opened for xy-, xz-, yz-cross-sections and
	38	! 3D-data). For plotting or analyzing these PE-data have to be collected and
	39	! to be put into single files, which is done by this routine.
	40	! Output format is NetCDF. Additionally, a data are output in a binary format
	41	! readable by ISO2D-software (cross-sections) and by AVS (3D-data).
	42	!
	43	! This routine must be compiled with:
	44	! decalpha:
	45	! f95 -cpp -D__netcdf -fast -r8 -I/usr/local/netcdf-3.5.1/include
	46	! -L/usr/local/netcdf-3.5.1/lib -lnetcdf
	47	! IBM-Regatta:
	48	! xlf95 -qsuffix=cpp=f90 -WF,-D__netcdf -qrealsize=8 -q64 -qmaxmem=-1 -Q
	49	! -I /aws/dataformats/netcdf-3.6.0-p1/64-32/include-64
	50	! -L/aws/dataformats/netcdf-3.6.0-p1/64-32/lib -lnetcdf -O3
	51	! IBM-Regatta KISTI:
	52	! xlf95 -qsuffix=cpp=f90 -WF,-D__netcdf -qrealsize=8 -q64 -qmaxmem=-1 -Q
	53	! -I /applic/netcdf64/src/f90
	54	! -L/applic/lib/NETCDF64 -lnetcdf -O3
	55	! IBM-Regatta Yonsei (gfdl5):
	56	! xlf95 -qsuffix=cpp=f90 -WF,-D__netcdf -qrealsize=8 -q64 -qmaxmem=-1 -Q
	57	! -I /usr1/users/raasch/pub/netcdf-3.6.0-p1/include
	58	! -L/usr1/users/raasch/pub/netcdf-3.6.0-p1/lib -lnetcdf -O3
	59	! IMUK:
	60	! ifort combine...f90 -o combine...x
	61	! -cpp -D__netcdf -I /muksoft/packages/netcdf/linux/include -axW -r8 -nbs
	62	! -Vaxlib -L /muksoft/packages/netcdf/linux/lib -lnetcdf
	63	! NEC-SX6:
	64	! sxf90 combine...f90 -o combine...x
	65	! -I /pool/SX-6/netcdf/netcdf-3.6.0-p1/include -C hopt -Wf '-A idbl4'
	66	! -D__netcdf -L/pool/SX-6/netcdf/netcdf-3.6.0-p1/lib -lnetcdf
	67	! Sun Fire X4600
	68	! pgf95 combine...f90 -o combine...x
	69	! -Mpreprocess -D__netcdf -I /home/usr5/mkanda/netcdf-3.6.1/src/f90 -r8
	70	! -fast -L/home/usr5/mkanda/netcdf-3.6.1/src/libsrc -lnetcdf
[108]	71	! FIMM:
	72	! ifort combine...f90 -o combine...x
	73	! -axW -cpp -openmp -r8 -nbs -convert little_endian -D__netcdf
	74	! -I /local/netcdf/include -Vaxlib -L/local/netcdf/lib -lnetcdf
[1]	75	!------------------------------------------------------------------------------!
	76
	77	#if defined( __netcdf )
	78	USE netcdf
	79	#endif
	80
	81	IMPLICIT NONE
	82
	83	!
	84	!-- Local variables
[108]	85	CHARACTER (LEN=2) :: modus, model_string
	86	CHARACTER (LEN=4) :: id_string
[1]	87	CHARACTER (LEN=10) :: dimname, var_name
	88	CHARACTER (LEN=40) :: filename
	89
	90	CHARACTER (LEN=2000), DIMENSION(0:1) :: var_list
	91
	92	INTEGER, PARAMETER :: spk = SELECTED_REAL_KIND( 6 )
	93
	94	INTEGER :: av, danz, i, id, &
[108]	95	j, model, models, nc_stat, nxa, nxag, nxe, nxeg, nya, &
[1]	96	nyag, nye, nyeg, nza, nzag, nze, nzeg, pos, time_step, xa, xe, &
	97	ya, ye, za, ze
	98
[108]	99	INTEGER, DIMENSION(0:1) :: current_level, current_var, fanz, id_set, &
	100	id_var_time, num_var
[1]	101
	102	INTEGER, DIMENSION(4) :: id_dims_loc
	103
	104	INTEGER, DIMENSION(0:1,4) :: id_dims
	105
	106	INTEGER, DIMENSION(0:1,1000) :: id_var, levels
	107
	108	LOGICAL :: avs_output, compressed, found, iso2d_output, netcdf_output, &
	109	netcdf_0, netcdf_1
	110
	111	REAL :: dx, simulated_time
	112	REAL, DIMENSION(:), ALLOCATABLE :: eta, ho, hu
[191]	113	REAL, DIMENSION(:,:), ALLOCATABLE :: pf, pf_tmp
	114	REAL(spk), DIMENSION(:,:,:), ALLOCATABLE :: pf3d, pf3d_tmp
[1]	115
	116	PRINT*, ''
[114]	117	PRINT*, ''
[108]	118	PRINT, ' combine_plot_fields *'
[114]	119
	120	!
	121	!-- Find out if a coupled run has been carried out
[108]	122	INQUIRE( FILE='COUPLING_PORT_OPENED', EXIST=found )
	123	IF ( found ) THEN
	124	models = 2
	125	PRINT*, ' coupled run'
	126	ELSE
	127	models = 1
	128	PRINT*, ' uncoupled run'
	129	ENDIF
[114]	130
	131	!
	132	!-- Do everything for each model
[108]	133	DO model = 1, models
[114]	134	!
	135	!-- Set the model string used to identify the filenames
	136	model_string = ''
[108]	137	IF ( models == 2 ) THEN
	138	PRINT*, ''
	139	PRINT, ' combine_plot_fields *'
	140	IF ( model == 2 ) THEN
[114]	141	model_string = '_O'
[108]	142	PRINT*, ' now combining ocean data'
	143	PRINT*, ' ========================'
	144	ELSE
	145	PRINT*, ' now combining atmosphere data'
	146	PRINT*, ' ============================='
	147	ENDIF
	148	ENDIF
[1]	149	!
[108]	150	!-- 2D-arrays for ISO2D
	151	!-- Main loop for the three different cross-sections, starting with
	152	!-- xy-section
	153	modus = 'XY'
	154	PRINT*, ''
	155	DO WHILE ( modus == 'XY' .OR. modus == 'XZ' .OR. modus == 'YZ' )
[1]	156	!
[108]	157	!-- Check, if file from PE0 exists. If it does not exist, PALM did not
	158	!-- create any output for this cross-section.
	159	danz = 0
	160	WRITE (id_string,'(I4.4)') danz
	161	INQUIRE ( &
	162	FILE='PLOT2D_'//modus//TRIM( model_string )//'_'//id_string, &
	163	EXIST=found )
	164	!
	165	!-- Find out the number of files (equal to the number of PEs which
	166	!-- have been used in PALM) and open them
	167	DO WHILE ( found )
[1]	168
[108]	169	OPEN ( danz+110, &
	170	FILE='PLOT2D_'//modus//TRIM( model_string )//'_'//id_string, &
	171	FORM='UNFORMATTED' )
	172	danz = danz + 1
	173	WRITE (id_string,'(I4.4)') danz
	174	INQUIRE ( &
	175	FILE='PLOT2D_'//modus//TRIM( model_string )//'_'//id_string, &
	176	EXIST=found )
[1]	177
[108]	178	ENDDO
[1]	179
	180	!
[108]	181	!-- Inquire whether an iso2d parameter file exists
	182	INQUIRE( FILE='PLOT2D_'//modus//'_GLOBAL'//TRIM( model_string ), &
	183	EXIST=iso2d_output )
[1]	184
	185	!
[108]	186	!-- Inquire whether a NetCDF file exists
	187	INQUIRE( FILE='DATA_2D_'//modus//'_NETCDF'//TRIM( model_string ), &
	188	EXIST=netcdf_0 )
[1]	189
	190	!
[108]	191	!-- Inquire whether a NetCDF file for time-averaged data exists
	192	INQUIRE( FILE='DATA_2D_'//modus//'_AV_NETCDF'//TRIM( model_string ),&
	193	EXIST=netcdf_1 )
[1]	194
[108]	195	IF ( netcdf_0 .OR. netcdf_1 ) THEN
	196	netcdf_output = .TRUE.
	197	ELSE
	198	netcdf_output = .FALSE.
	199	ENDIF
[1]	200
	201	!
[108]	202	!-- Info-output
	203	PRINT*, ''
	204	PRINT, ' combine_plot_fields *'
[1]	205	#if defined( __netcdf )
[108]	206	IF ( netcdf_output ) PRINT*, ' NetCDF output enabled'
[1]	207	#else
[108]	208	IF ( netcdf_output ) THEN
	209	PRINT*, '--- Sorry, no NetCDF support on this host'
	210	netcdf_output = .FALSE.
	211	ENDIF
[1]	212	#endif
[108]	213	IF ( danz /= 0 ) THEN
	214	PRINT*, ' ',modus,'-section: ', danz, ' file(s) found'
	215	ELSE
	216	PRINT*, ' no ', modus, '-section data available'
	217	ENDIF
[1]	218
[108]	219	IF ( netcdf_output .AND. danz /= 0 ) THEN
[1]	220	#if defined( __netcdf )
[108]	221	DO av = 0, 1
[1]	222
[108]	223	IF ( av == 0 .AND. .NOT. netcdf_0 ) CYCLE
	224	IF ( av == 1 .AND. .NOT. netcdf_1 ) CYCLE
[1]	225
	226	!
[108]	227	!-- Open NetCDF dataset
	228	IF ( av == 0 ) THEN
	229	filename = 'DATA_2D_'//modus//'_NETCDF' &
	230	//TRIM( model_string )
	231	ELSE
	232	filename = 'DATA_2D_'//modus//'_AV_NETCDF' &
	233	//TRIM( model_string )
	234	ENDIF
	235	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set(av) )
	236	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 1 )
[1]	237
	238	!
[108]	239	!-- Get the list of variables (order of variables corresponds with
	240	!-- the order of data on the binary file)
	241	var_list(av) = ' ' ! GET_ATT does not assign trailing blanks
	242	nc_stat = NF90_GET_ATT( id_set(av), NF90_GLOBAL, 'VAR_LIST', &
	243	var_list(av) )
	244	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 2 )
[1]	245
	246	!
[108]	247	!-- Inquire id of the time coordinate variable
	248	nc_stat = NF90_INQ_VARID( id_set(av), 'time', id_var_time(av) )
	249	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 3 )
[1]	250
	251	!
[108]	252	!-- Count number of variables; there is one more semicolon in the
	253	!-- string than variable names
	254	num_var(av) = -1
	255	DO i = 1, LEN( var_list(av) )
	256	IF ( var_list(av)(i:i) == ';' ) num_var(av) = num_var(av) +1
	257	ENDDO
[1]	258
	259	!
[108]	260	!-- Extract the variable names from the list and inquire their
	261	!-- NetCDF IDs
	262	pos = INDEX( var_list(av), ';' )
[1]	263	!
[108]	264	!-- Loop over all variables
	265	DO i = 1, num_var(av)
[1]	266
	267	!
[108]	268	!-- Extract variable name from list
	269	var_list(av) = var_list(av)(pos+1:)
	270	pos = INDEX( var_list(av), ';' )
	271	var_name = var_list(av)(1:pos-1)
[1]	272
	273	!
[108]	274	!-- Get variable ID from name
	275	nc_stat = NF90_INQ_VARID( id_set(av), TRIM( var_name ), &
	276	id_var(av,i) )
	277	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 4 )
[1]	278
	279	!
[108]	280	!-- Get number of x/y/z levels for that variable
	281	nc_stat = NF90_INQUIRE_VARIABLE( id_set(av), id_var(av,i), &
	282	dimids = id_dims_loc )
	283	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 5 )
	284	id_dims(av,:) = id_dims_loc
[1]	285
	286	!
[108]	287	!-- Inquire dimension ID
	288	DO j = 1, 4
	289	nc_stat = NF90_INQUIRE_DIMENSION( id_set(av), &
	290	id_dims(av,j), dimname, levels(av,i) )
	291	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 6 )
[1]	292
[108]	293	IF ( modus == 'XY' .AND. INDEX(dimname, 'z') /= 0 ) EXIT
	294	IF ( modus == 'XZ' .AND. INDEX(dimname, 'y') /= 0 ) EXIT
	295	IF ( modus == 'YZ' .AND. INDEX(dimname, 'x') /= 0 ) EXIT
	296	ENDDO
	297
[1]	298	ENDDO
	299
[108]	300	ENDDO ! av = 0, 1
[1]	301
[179]	302	#endif
[108]	303	ENDIF
[1]	304
	305	!
[108]	306	!-- Read the arrays, as long as the end of the file is reached
	307	fanz = 0
	308	current_level = 1
	309	current_var = 999999999
[1]	310
[108]	311	DO WHILE ( danz /= 0 )
[1]	312
	313	!
[108]	314	!-- Loop over all files (reading data of the subdomains)
	315	DO id = 0, danz-1
[1]	316	!
[108]	317	!-- File from PE0 contains special information at the beginning,
	318	!-- concerning the lower and upper indices of the total-domain used
	319	!-- in PALM (nxag, nxeg, nyag, nyeg) and the lower and upper indices
	320	!-- of the array to be writte by this routine (nxa, nxe, nya,
	321	!-- nye). Usually in the horizontal directions nxag=-1 and nxa=0
	322	!-- while all other variables have the same value (i.e. nxeg=nxe).
	323	!-- Allocate necessary arrays, open the output file and write
	324	!-- the coordinate informations needed by ISO2D.
	325	IF ( id == 0 .AND. fanz(0) == 0 .AND. fanz(1) == 0 ) THEN
	326	READ ( id+110 ) nxag, nxeg, nyag, nyeg
	327	READ ( id+110 ) nxa, nxe, nya, nye
	328	ALLOCATE ( eta(nya:nye), ho(nxa:nxe), hu(nxa:nxe), &
	329	pf(nxag:nxeg,nyag:nyeg) )
	330	READ ( id+110 ) dx, eta, hu, ho
[1]	331
[108]	332	IF ( iso2d_output ) THEN
	333	OPEN ( 2, FILE='PLOT2D_'//modus//TRIM( model_string ), &
	334	FORM='UNFORMATTED' )
	335	WRITE ( 2 ) dx, eta, hu, ho
	336	ENDIF
[1]	337	ENDIF
	338	!
[108]	339	!-- Read output time
	340	IF ( netcdf_output .AND. id == 0 ) THEN
	341	IF ( netcdf_1 ) THEN
	342	READ ( id+110, END=998 ) simulated_time, time_step, av
	343	ELSE
[1]	344	!
[108]	345	!-- For compatibility with earlier PALM versions
	346	READ ( id+110, END=998 ) simulated_time, time_step
	347	av = 0
	348	ENDIF
[1]	349	ENDIF
	350	!
[108]	351	!-- Read subdomain indices
	352	READ ( id+110, END=998 ) xa, xe, ya, ye
[1]	353	!
[108]	354	!-- IF the PE made no output (in case that no part of the
	355	!-- cross-section is situated on this PE), indices have the
	356	!-- value -1
	357	IF ( .NOT. ( xa == -1 .AND. xe == -1 .AND. &
	358	ya == -1 .AND. ye == -1 ) ) THEN
[1]	359	!
[108]	360	!-- Read the subdomain grid-point values
[191]	361	ALLOCATE( pf_tmp(xa:xe,ya:ye) )
	362	READ ( id+110 ) pf_tmp
	363	pf(xa:xe,ya:ye) = pf_tmp
	364	DEALLOCATE( pf_tmp )
[108]	365	ENDIF
	366	IF ( id == 0 ) fanz(av) = fanz(av) + 1
[1]	367
[108]	368	ENDDO
[1]	369	!
[108]	370	!-- Write the data of the total domain cross-section
	371	IF ( iso2d_output ) WRITE ( 2 ) pf(nxa:nxe,nya:nye)
[1]	372
	373	!
[108]	374	!-- Write same data in NetCDF format
	375	IF ( netcdf_output ) THEN
[1]	376	#if defined( __netcdf )
	377	!
[108]	378	!-- Check if a new time step has begun; if yes write data to time
	379	!-- axis
	380	IF ( current_var(av) > num_var(av) ) THEN
	381	current_var(av) = 1
	382	nc_stat = NF90_PUT_VAR( id_set(av), id_var_time(av), &
	383	(/ simulated_time /), &
	384	start = (/ time_step /), &
	385	count = (/ 1 /) )
	386	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 7 )
	387	ENDIF
[1]	388
	389	!
[108]	390	!-- Now write the data; this is mode dependent
	391	SELECT CASE ( modus )
[1]	392
[108]	393	CASE ( 'XY' )
	394	nc_stat = NF90_PUT_VAR( id_set(av), &
[1]	395	id_var(av,current_var(av)), &
	396	pf(nxa:nxe,nya:nye), &
	397	start = (/ 1, 1, current_level(av), time_step /), &
	398	count = (/ nxe-nxa+1, nye-nya+1, 1, 1 /) )
[108]	399	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 8)
[1]	400
[108]	401	CASE ( 'XZ' )
	402	nc_stat = NF90_PUT_VAR( id_set(av), &
[1]	403	id_var(av,current_var(av)), &
	404	pf(nxa:nxe,nya:nye), &
	405	start = (/ 1, current_level(av), 1, time_step /), &
	406	count = (/ nxe-nxa+1, 1, nye-nya+1, 1 /) )
[108]	407	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 9)
[1]	408
[108]	409	CASE ( 'YZ' )
	410	nc_stat = NF90_PUT_VAR( id_set(av), &
[1]	411	id_var(av,current_var(av)), &
	412	pf(nxa:nxe,nya:nye), &
	413	start = (/ current_level(av), 1, 1, time_step /), &
	414	count = (/ 1, nxe-nxa+1, nye-nya+1, 1 /) )
[108]	415	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error(10)
[1]	416
[108]	417	END SELECT
[1]	418
	419	!
[108]	420	!-- Data is written, check if max level is reached
	421	current_level(av) = current_level(av) + 1
	422	IF ( current_level(av) > levels(av,current_var(av)) ) THEN
	423	current_level(av) = 1
	424	current_var(av) = current_var(av) + 1
	425	ENDIF
	426
[179]	427	#endif
[1]	428	ENDIF
	429
[108]	430	ENDDO
[1]	431
[108]	432	998 IF ( danz /= 0 ) THEN
[1]	433	!
[108]	434	!-- Print the number of the arrays processed
	435	WRITE (*,'(16X,I4,A)') fanz(0)+fanz(1), ' array(s) processed'
	436	IF ( fanz(1) /= 0 ) THEN
	437	WRITE (*,'(16X,I4,A)') fanz(1), ' array(s) are time-averaged'
	438	ENDIF
[1]	439
	440	!
[108]	441	!-- Close all files and deallocate arrays
	442	DO id = 0, danz-1
	443	CLOSE ( id+110 )
	444	ENDDO
	445	CLOSE ( 2 )
	446	DEALLOCATE ( eta, ho, hu, pf )
	447	ENDIF
[1]	448
	449	!
[108]	450	!-- Close the NetCDF file
	451	IF ( netcdf_output .AND. danz /= 0 ) THEN
[1]	452	#if defined( __netcdf )
[108]	453	IF ( netcdf_0 ) THEN
	454	nc_stat = NF90_CLOSE( id_set(0) )
	455	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 11 )
	456	ENDIF
	457	IF ( netcdf_1 ) THEN
	458	nc_stat = NF90_CLOSE( id_set(1) )
	459	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 12 )
	460	ENDIF
	461	#endif
[1]	462	ENDIF
	463
	464	!
[108]	465	!-- Choose the next cross-section
	466	SELECT CASE ( modus )
	467	CASE ( 'XY' )
	468	modus = 'XZ'
	469	CASE ( 'XZ' )
	470	modus = 'YZ'
	471	CASE ( 'YZ' )
	472	modus = 'no'
	473	END SELECT
[1]	474
[108]	475	ENDDO
[1]	476
	477
	478	!
[108]	479	!-- Combine the 3D-arrays
[1]	480
	481	!
[108]	482	!-- Inquire whether an avs fld file exists
	483	INQUIRE( FILE='PLOT3D_FLD'//TRIM( model_string ), EXIST=avs_output )
[1]	484
	485	!
[108]	486	!-- Inquire whether a NetCDF file exists
	487	INQUIRE( FILE='DATA_3D_NETCDF'//TRIM( model_string ), EXIST=netcdf_0 )
[1]	488
	489	!
[108]	490	!-- Inquire whether a NetCDF file for time-averaged data exists
	491	INQUIRE( FILE='DATA_3D_AV_NETCDF'//TRIM( model_string ), EXIST=netcdf_1 )
[1]	492
[108]	493	IF ( netcdf_0 .OR. netcdf_1 ) THEN
	494	netcdf_output = .TRUE.
	495	ELSE
	496	netcdf_output = .FALSE.
	497	ENDIF
[1]	498
	499	!
[108]	500	!-- Check, if file from PE0 exists
	501	danz = 0
	502	WRITE (id_string,'(I4.4)') danz
	503	INQUIRE ( &
	504	FILE='PLOT3D_DATA'//TRIM( model_string )//'_'//TRIM( id_string ), &
	505	EXIST=found )
[1]	506
	507	!
[108]	508	!-- Combination only works, if data are not compressed. In that case,
	509	!-- PALM created a flag file (PLOT3D_COMPRESSED)
	510	INQUIRE ( FILE='PLOT3D_COMPRESSED'//TRIM( model_string ), &
	511	EXIST=compressed )
[1]	512
	513	!
[108]	514	!-- Find out the number of files and open them
	515	DO WHILE ( found .AND. .NOT. compressed )
[1]	516
[108]	517	OPEN ( danz+110, &
	518	FILE='PLOT3D_DATA'//TRIM( model_string )//'_'//TRIM(id_string), &
	519	FORM='UNFORMATTED')
	520	danz = danz + 1
	521	WRITE (id_string,'(I4.4)') danz
	522	INQUIRE ( &
	523	FILE='PLOT3D_DATA'//TRIM( model_string )//'_'//TRIM(id_string), &
	524	EXIST=found )
[1]	525
[108]	526	ENDDO
[1]	527
	528	!
[108]	529	!-- Info-output
	530	PRINT*, ' '
	531	PRINT, ' combine_plot_fields *'
[1]	532	#if defined( __netcdf )
	533	IF ( netcdf_output ) PRINT*, ' NetCDF output enabled'
	534	#else
	535	IF ( netcdf_output ) THEN
	536	PRINT*, '--- Sorry, no NetCDF support on this host'
	537	netcdf_output = .FALSE.
	538	ENDIF
	539	#endif
[108]	540	IF ( danz /= 0 ) THEN
	541	PRINT*, ' 3D-data: ', danz, ' file(s) found'
[1]	542	ELSE
[108]	543	IF ( found .AND. compressed ) THEN
	544	PRINT*, '+++ no 3D-data processing, since data are compressed'
	545	ELSE
	546	PRINT*, ' no 3D-data file available'
	547	ENDIF
[1]	548	ENDIF
	549
[108]	550	IF ( netcdf_output .AND. danz /= 0 ) THEN
[1]	551	#if defined( __netcdf )
[108]	552	DO av = 0, 1
[1]	553
[108]	554	IF ( av == 0 .AND. .NOT. netcdf_0 ) CYCLE
	555	IF ( av == 1 .AND. .NOT. netcdf_1 ) CYCLE
[1]	556
	557	!
[108]	558	!-- Open NetCDF dataset
	559	IF ( av == 0 ) THEN
	560	filename = 'DATA_3D_NETCDF'//TRIM( model_string )
	561	ELSE
	562	filename = 'DATA_3D_AV_NETCDF'//TRIM( model_string )
	563	ENDIF
	564	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set(av) )
	565	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 13 )
[1]	566
	567
	568	!
[108]	569	!-- Get the list of variables (order of variables corresponds with the
	570	!-- order of data on the binary file)
	571	var_list(av) = ' ' ! GET_ATT does not assign trailing blanks
	572	nc_stat = NF90_GET_ATT( id_set(av), NF90_GLOBAL, 'VAR_LIST', &
	573	var_list(av) )
	574	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 14 )
[1]	575
	576	!
[108]	577	!-- Inquire id of the time coordinate variable
	578	nc_stat = NF90_INQ_VARID( id_set(av), 'time', id_var_time(av) )
	579	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 15 )
[1]	580
	581	!
[108]	582	!-- Count number of variables; there is one more semicolon in the
	583	!-- string than variable names
	584	num_var(av) = -1
	585	DO i = 1, LEN( var_list(av) )
	586	IF ( var_list(av)(i:i) == ';' ) num_var(av) = num_var(av) + 1
	587	ENDDO
[1]	588
	589	!
[108]	590	!-- Extract the variable names from the list and inquire their NetCDF
	591	!-- IDs
	592	pos = INDEX( var_list(av), ';' )
[1]	593	!
[108]	594	!-- Loop over all variables
	595	DO i = 1, num_var(av)
[1]	596
	597	!
[108]	598	!-- Extract variable name from list
	599	var_list(av) = var_list(av)(pos+1:)
	600	pos = INDEX( var_list(av), ';' )
	601	var_name = var_list(av)(1:pos-1)
[1]	602
	603	!
[108]	604	!-- Get variable ID from name
	605	! print, '** find id for "',TRIM( var_name ),'" begin'
	606	nc_stat = NF90_INQ_VARID( id_set(av), TRIM( var_name ), &
	607	id_var(av,i) )
	608	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 16 )
	609	! print, '** find id for "',TRIM( var_name ),'" end'
[1]	610
[108]	611	ENDDO
[1]	612
[108]	613	ENDDO ! av=0,1
[1]	614
[179]	615	#endif
[108]	616	ENDIF
[1]	617
	618	!
[108]	619	!-- Read arrays, until the end of the file is reached
	620	current_var = 999999999
	621	fanz = 0
	622	DO WHILE ( danz /= 0 )
[1]	623
	624	!
[108]	625	!-- Loop over all files
	626	DO id = 0, danz-1
[1]	627	!
[108]	628	!-- File from PE0 contains special information at the beginning,
	629	!-- concerning the lower and upper indices of the total-domain used in
	630	!-- PALM (nxag, nxeg, nyag, nyeg, nzag, nzeg) and the lower and upper
	631	!-- indices of the array to be written by this routine (nxa, nxe, nya,
	632	!-- nye, nza, nze). Usually nxag=-1 and nxa=0, nyag=-1 and nya=0,
	633	!-- nzeg=nz and nze=nz_plot3d.
	634	!-- Allocate necessary array and open the output file.
	635	IF ( id == 0 .AND. fanz(0) == 0 .AND. fanz(1) == 0 ) THEN
	636	READ ( id+110 ) nxag, nxeg, nyag, nyeg, nzag, nzeg
	637	READ ( id+110 ) nxa, nxe, nya, nye, nza, nze
	638	ALLOCATE ( pf3d(nxag:nxeg,nyag:nyeg,nzag:nzeg) )
	639	IF ( avs_output ) THEN
	640	OPEN ( 2, FILE='PLOT3D_DATA'//TRIM( model_string ), &
	641	FORM='UNFORMATTED' )
	642	ENDIF
[1]	643	ENDIF
	644
	645	!
[108]	646	!-- Read output time
	647	IF ( netcdf_output .AND. id == 0 ) THEN
	648	IF ( netcdf_1 ) THEN
	649	READ ( id+110, END=999 ) simulated_time, time_step, av
	650	ELSE
[1]	651	!
[108]	652	!-- For compatibility with earlier PALM versions
	653	READ ( id+110, END=999 ) simulated_time, time_step
	654	av = 0
	655	ENDIF
[1]	656	ENDIF
	657
	658	!
[108]	659	!-- Read subdomain indices and grid point values
	660	READ ( id+110, END=999 ) xa, xe, ya, ye, za, ze
[191]	661	ALLOCATE( pf3d_tmp(xa:xe,ya:ye,za:ze) )
	662	READ ( id+110 ) pf3d_tmp
	663	pf3d(xa:xe,ya:ye,za:ze) = pf3d_tmp
	664	DEALLOCATE( pf3d_tmp )
[108]	665	IF ( id == 0 ) fanz(av) = fanz(av) + 1
[1]	666
[108]	667	ENDDO
[1]	668
	669	!
[108]	670	!-- Write data of the total domain
	671	IF ( avs_output ) WRITE ( 2 ) pf3d(nxa:nxe,nya:nye,nza:nze)
[1]	672
	673	!
[108]	674	!-- Write same data in NetCDF format
	675	IF ( netcdf_output ) THEN
[1]	676	#if defined( __netcdf )
	677	!
[108]	678	!-- Check if a new time step has begun; if yes write data to time axis
	679	IF ( current_var(av) > num_var(av) ) THEN
	680	current_var(av) = 1
	681	nc_stat = NF90_PUT_VAR( id_set(av), id_var_time(av), &
[1]	682	(/ simulated_time /),&
	683	start = (/ time_step /), count = (/ 1 /) )
[108]	684	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 17 )
	685	ENDIF
[1]	686
	687	!
[108]	688	!-- Now write the data
	689	nc_stat = NF90_PUT_VAR( id_set(av), id_var(av,current_var(av)), &
[1]	690	pf3d(nxa:nxe,nya:nye,nza:nze), &
	691	start = (/ 1, 1, 1, time_step /), &
	692	count = (/ nxe-nxa+1, nye-nya+1, nze-nza+1, 1 /) )
[108]	693	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 18 )
[1]	694
[108]	695	current_var(av) = current_var(av) + 1
[1]	696
	697	#endif
[108]	698	ENDIF
[1]	699
[108]	700	ENDDO
[1]	701
[108]	702	999 IF ( danz /= 0 ) THEN
[1]	703	!
[108]	704	!-- Print the number of arrays processed
	705	WRITE (*,'(16X,I4,A)') fanz(0)+fanz(1), ' array(s) processed'
	706	IF ( fanz(1) /= 0 ) THEN
	707	WRITE (*,'(16X,I4,A)') fanz(1), ' array(s) are time-averaged'
	708	ENDIF
[1]	709	!
[108]	710	!-- Close all files and deallocate array
	711	DO id = 0, danz-1
	712	CLOSE ( id+110 )
	713	ENDDO
	714	CLOSE ( 2 )
	715	DEALLOCATE ( pf3d )
[1]	716	!
[108]	717	!-- Close the NetCDF file
	718	IF ( netcdf_output ) THEN
[1]	719	#if defined( __netcdf )
[108]	720	IF ( netcdf_0 ) THEN
	721	nc_stat = NF90_CLOSE( id_set(0) )
	722	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 19 )
	723	ENDIF
	724	IF ( netcdf_1 ) THEN
	725	nc_stat = NF90_CLOSE( id_set(1) )
	726	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 20 )
	727	ENDIF
	728	#endif
[1]	729	ENDIF
	730	ENDIF
	731
[108]	732	ENDDO ! models
[1]	733
[108]	734
[1]	735	CONTAINS
	736
	737
	738	SUBROUTINE handle_netcdf_error( errno )
	739	!
	740	!-- Prints out a text message corresponding to the current NetCDF status
	741
	742	IMPLICIT NONE
	743
	744	INTEGER, INTENT(IN) :: errno
	745
[179]	746	#if defined( __netcdf )
[1]	747	IF ( nc_stat /= NF90_NOERR ) THEN
	748	PRINT*, '+++ combine_plot_fields netcdf: ', av, errno, &
	749	TRIM( nf90_strerror( nc_stat ) )
	750	ENDIF
[179]	751	#endif
[1]	752
	753	END SUBROUTINE handle_netcdf_error
	754
	755
	756	END PROGRAM combine_plot_fields
	757
	758
	759

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |