source: palm/trunk/TESTS/cases/openacc_test/MONITORING/openacc_test_rc.000 @ 4446

Last change on this file since 4446 was 4446, checked in by raasch, 4 years ago

bugfix for r4443: cycle number zero added to all monitoring and output file in TESTS and TUTORIALS folders

File size: 6.6 KB
RevLine 
[3683]1
2 ******************************    --------------------------------------------
[4327]3 * PALM 6.0  Rev: 4325M       *    atmosphere - run without 1D - prerun
[3683]4 ******************************    --------------------------------------------
5
[4327]6 Date:               2019-12-06    Run:       openacc_test__pgi_mpi_only__2     
7 Time:                 11:21:18    Run-No.:   00
8 Run on host:        pgi_mpi_on
9 Number of PEs:               2    Processor grid (x,y): (   1,   2) calculated
10                                   A 1d-decomposition along y is used
[3683]11 ------------------------------------------------------------------------------
12
13 Numerical Schemes:
14 -----------------
15
16 --> Use the Moeng_Wyngaard turbulence closure (LES mode).
17 --> Use the boussinesq approximation for the model equations.
[4186]18 --> Solve perturbation pressure via FFT using temperton-algorithm routines
[3683]19     perturbation pressure is calculated at every Runge-Kutta step
20 --> Momentum advection via Wicker-Skamarock-Scheme 5th order
21 --> Scalar advection via Wicker-Skamarock-Scheme 5th order
22 --> Loop optimization method: vector
23 --> Time differencing scheme: runge-kutta-3       
24 ------------------------------------------------------------------------------
25
26
27 Run time and time step information:
28 ----------------------------------
29
30 Timestep:             variable     maximum value: 20.000 s    CFL-factor: 0.90
31 Start time:              0.000 s
32 End time:               60.000 s
33
34
35 Computational grid and domain size:
36 ----------------------------------
37
38 Grid length:      dx =      50.000 m    dy =      50.000 m
39                dz(1) =      50.000 m
40                dz(2) =     999.000 m
41
42 Domain size:       x =   2000.000 m     y =   2000.000 m  z(u) =   2862.511 m
43
44 Vertical stretching starts at height:    1225.0 m,
45 Vertical stretching starts at index:           25,
46 Vertical stretching ends at height:   9999999.9 m,
47 Vertical stretching ends at index:             41,
48 Factor used for stretching:                 1.080,
49
50 Number of gridpoints (x,y,z):  (0:  39, 0:  39, 0:  41)
[4327]51 Subdomain size (x,y,z):        (    40,     20,     42)
[3683]52
53
54    Characteristic levels of the geo. wind component ug:
55
56       Height:         0.0     0.0  m
57       ug:            0.00    0.00  m/s
58       Gradient:    ------    0.00  1/100s
59       Gridpoint:        0       0
60
61    Characteristic levels of the geo. wind component vg:
62
63       Height:         0.0     0.0  m
64       vg:            0.00    0.00  m/s
65       Gradient:    ------    0.00  1/100s
66       Gridpoint:        0       0
67
68
69 Topography information:
70 ----------------------
71
72 Topography: flat                                   
73
74
75 Boundary conditions:
76 -------------------
77
78                     p                    uv                                  pt
79
80 B. bound.: p(0)     = p(1)   | uv(0)     = -uv(1)                | pt(0)     = pt(1)           
81 T. bound.: p(nzt+1) = 0      | uv(nzt+1) = ug(nzt+1), vg(nzt+1)  | pt(nzt+1) = pt(nzt) + dpt/dz_
82
83                     e
84
85 B. bound.: e(0)     = e(1)                                                                     
86 T. bound.: e(nzt+1) = e(nzt) = e(nzt-1)                                                         
87
88 Bottom surface fluxes are used in diffusion terms at k=1
89       Predefined constant heatflux:    0.100000 K m/s
90
91
92    Constant flux layer between bottom surface and first computational u,v-level:
93
94       z_mo =  25.00 m   z0 = 0.1000 m   z0h = 0.10000 m   kappa = 0.40
95       Rif value range:     -20.00 <= rif <= 20.00
96
97
98 Lateral boundaries:
99       left/right:  cyclic             
100       north/south: cyclic             
101
102
103 Initial profiles:
104 ----------------
105
106    Characteristic levels of the initial temperature profile:
107
108       Height:           0.0     0.0   800.0  m
109       Temperature:   300.00  300.00  300.00  K
110       Gradient:      ------    0.00    1.00  K/100m
111       Gridpoint:          0       0      16
112
113
114 List output:
115 -----------
116
117    1D-Profiles:
118       Output every             9999999.90 s
119
120
121 Data output:
122 -----------
123
124
125    Time series:
126       Output format: netCDF 64bit offset                     
127
128       Output every                 0.00 s
129
130 ------------------------------------------------------------------------------
131
132
133 Physical quantities:
134 -------------------
135
[4327]136    Geograph. latitude  :   latitude  =  55.0 degr
137    Geograph. longitude :   longitude =   0.0 degr
138    Rotation angle      :   rotation_angle =   0.0 degr
[3683]139    Angular velocity    :   omega  = 0.729E-04 rad/s
140    Coriolis parameter  :   f      =  0.000119 1/s
141                            f*     =  0.000084 1/s
142
[4327]143    Date and time at model start : 2019-06-21 12:00:00 +00
[3683]144
145    Gravity             :   g      =  9.8 m/s**2
146
147    Reference state used in buoyancy terms: initial_profile
148
149
150 Cloud physics quantities / methods:
151 ----------------------------------
152
153
154
155 LES / Turbulence quantities:
156 ---------------------------
157
158    Mixing length is limited to 1.80 * z
159
160
161 Actions during the simulation:
162 -----------------------------
163
164    Disturbance impulse (u,v) every :   150.00 s
165    Disturbance amplitude           :     0.25 m/s
166    Lower disturbance level         :   125.00 m (GP    3)
167    Upper disturbance level         :   625.00 m (GP   13)
168    Disturbances cease as soon as the disturbance energy exceeds 0.010 m**2/s**2
169    Random number generator used    : random-parallel
170
171
172
[4186]173 *** dynamic module disabled
[3683]174
175 ------------------------------------------------------------------------------
176
177
178
179Run-control output:
180------------------
181
182RUN  ITER. HH:MM:SS.SS    DT(E)     UMAX     VMAX     WMAX     U*    W*      THETA*     Z_I     ENERG.   DISTENERG    DIVOLD     DIVNEW     UMAX(KJI)    VMAX(KJI)    WMAX(KJI)   ADVECX   ADVECY   MGCYC
183---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
184  0      0 00:00:00.00  20.0000A  -0.2131D -0.2288D  0.1182  0.000  1.38   0.000E+00    800.  0.104E-02  0.103E-02  0.597E-03  0.867E-13    7   7  11   11   7  19    5  26   7    0.000    0.000       0
[4327]185  0      1 00:00:20.00  20.0000D  -0.2125  -0.2273   0.1172  0.009  0.69  -0.134E+02    100.  0.103E-02  0.102E-02  0.569E-05  0.411E-15    7   7  11   11   7  19    5  26   7    0.000    0.000       0
186  0      2 00:00:40.00  20.0000D  -0.2117  -0.2252   0.1162  0.009  0.69  -0.135E+02    100.  0.102E-02  0.102E-02  0.934E-05  0.416E-15    7   7  11   11   7  19    5  26   7    0.000    0.000       0
[4186]187  0      3 00:01:00.00  20.0000D  -0.2106  -0.2227   0.1152  0.009  0.69  -0.137E+02    100.  0.101E-02  0.101E-02  0.130E-04  0.421E-15    7   7  11   11   7  19    5  26   7    0.000    0.000       0
Note: See TracBrowser for help on using the repository browser.