SUBROUTINE write_var_list !--------------------------------------------------------------------------------! ! This file is part of PALM. ! ! PALM is free software: you can redistribute it and/or modify it under the terms ! of the GNU General Public License as published by the Free Software Foundation, ! either version 3 of the License, or (at your option) any later version. ! ! PALM is distributed in the hope that it will be useful, but WITHOUT ANY ! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR ! A PARTICULAR PURPOSE. See the GNU General Public License for more details. ! ! You should have received a copy of the GNU General Public License along with ! PALM. If not, see . ! ! Copyright 1997-2012 Leibniz University Hannover !--------------------------------------------------------------------------------! ! ! Current revisions: ! ----------------- ! ! ! Former revisions: ! ----------------- ! $Id: write_var_list.f90 1116 2013-03-26 18:49:55Z suehring $ ! ! 1115 2013-03-26 18:16:16Z hoffmann ! unused variables removed ! ! 1065 2012-11-22 17:42:36Z hoffmann ! +nc, c_sedimentation, turbulence, limiter_sedimentation ! -mu_constant, mu_constant_value ! ! 1053 2012-11-13 17:11:03Z hoffmann ! necessary expansions according to the two new prognostic equations (nr, qr) ! of the two-moment cloud physics scheme: ! +bc_*_b, bc_*_t, bc_*_t_val, *_init, *_surface, *_surface_initial_change, ! +*_vertical_gradient, *_vertical_gradient_level, *_vertical_gradient_level_ind, ! +surface_waterflux_* ! ! in addition, steering parameters parameters of the two-moment cloud physics ! scheme: ! +cloud_scheme, +drizzle, +mu_constant, +mu_constant_value, +ventilation_effect ! ! 1036 2012-10-22 13:43:42Z raasch ! code put under GPL (PALM 3.9) ! ! 1015 2012-09-27 09:23:24Z raasch ! -adjust_mixing_length ! ! 1003 2012-09-14 14:35:53Z raasch ! -grid_matching ! ! 1001 2012-09-13 14:08:46Z raasch ! -cut_spline_overshoot, last_dt_change, long_filter_factor, overshoot_limit_*, ! ups_limit_* ! ! 978 2012-08-09 08:28:32Z fricke ! -km_damp_max, outflow_damping_width ! +pt_damping_factor, pt_damping_width ! +z0h_factor ! ! 940 2012-07-09 14:31:00Z raasch ! +neutral ! ! 927 2012-06-06 19:15:04Z raasch ! +masking_method ! ! 849 2012-03-15 10:35:09Z raasch ! first_call_advec_particles renamed first_call_lpm ! ! 824 2012-02-17 09:09:57Z raasch ! +curvature_solution_effects ! ! 622 2010-12-10 08:08:13Z raasch ! +collective_wait ! ! 600 2010-11-24 16:10:51Z raasch ! +call_psolver_at_all_substeps, cfl_factor, cycle_mg, mg_cycles, ! mg_switch_to_pe0_level, ngsrb, nsor, omega_sor, psolver, ! rayleigh_damping_factor, rayleigh_damping_height, residual_limit ! ! 589 2010-10-27 14:21:29Z heinze ! bugfix: character string of subs_vertical_gradient and ! subs_vertical_gradient_level shortened to 30 characters ! ! 587 2010-10-27 08:36:51Z helmke ! +time_domask ! ! 580 2010-10-05 13:59:11Z heinze ! Renaming of ws_vertical_gradient to subs_vertical_gradient, ! ws_vertical_gradient_level to subs_vertical_gradient_level and ! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i ! ! 411 2009-12-11 14:15:58Z heinze ! +large_scale_subsidence, ws_vertical_gradient, ws_vertical_gradient_level, ! ws_vertical_gradient_level_ind ! ! 345 2009-07-01 14:37:56Z heinze ! +output_for_t0 ! bugfix: -dt_fixed, because otherwise, restart runs cannot change from a ! fixed to a free timestep. ! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left, ! canyon_wall_south, conserve_volume_flow_mode, coupling_start_time, ! dp_external, dp_level_b, dp_smooth, dpdxy, run_coupled, ! time_since_reference_point, topography_grid_convention, u_bulk, v_bulk ! ! 153 2008-03-19 09:41:30Z steinfeld ! +cthf, leaf_surface_concentration, scalar_exchange_coefficient ! +numprocs, hor_index_bounds, inflow_damping_height, inflow_damping_width, ! mean_inflow_profiles, recycling_width, turbulent_inflow, ! -cross_ts_*, npex, npey ! hom_sum, volume_flow_area, volume_flow_initial moved from write_3d_binary ! to here ! ! 138 2007-11-28 10:03:58Z letzel ! +canopy_mode, drag_coefficient, lad, lad_surface, lad_vertical_gradient, ! lad_vertical_gradient_level, lad_vertical_gradient_level_ind, pch_index, ! plant_canopy, time_sort_particles ! ! 102 2007-07-27 09:09:17Z raasch ! +top_momentumflux_u|v, time_coupling ! ! 95 2007-06-02 16:48:38Z raasch ! +bc_sa_t, ocean, sa_init, sa_surface, sa_vertical_gradient, ! sa_vertical_gradient_level, bottom/top_salinity_flux ! ! 87 2007-05-22 15:46:47Z raasch ! +max_pr_user (version 3.1) ! ! 75 2007-03-22 09:54:05Z raasch ! +loop_optimization, pt_refrence, moisture renamed humidity ! ! 20 2007-02-26 00:12:32Z raasch ! +top_heatflux, use_top_fluxes ! ! RCS Log replace by Id keyword, revision history cleaned up ! ! Revision 1.34 2006/08/22 14:30:52 raasch ! +dz_max ! ! Revision 1.1 1998/03/18 20:20:38 raasch ! Initial revision ! ! ! Description: ! ------------ ! Writing values of control variables to restart-file (binary format). ! These informations are only written to the file opened by PE0. !------------------------------------------------------------------------------! USE arrays_3d USE averaging USE cloud_parameters USE control_parameters USE grid_variables USE indices USE model_1d USE netcdf_control USE particle_attributes USE pegrid USE profil_parameter USE statistics IMPLICIT NONE CHARACTER (LEN=10) :: binary_version binary_version = '3.9' WRITE ( 14 ) binary_version WRITE ( 14 ) 'numprocs ' WRITE ( 14 ) numprocs WRITE ( 14 ) 'hor_index_bounds ' WRITE ( 14 ) hor_index_bounds WRITE ( 14 ) 'nz ' WRITE ( 14 ) nz WRITE ( 14 ) 'max_pr_user ' WRITE ( 14 ) max_pr_user WRITE ( 14 ) 'statistic_regions ' WRITE ( 14 ) statistic_regions ! !-- Caution: After changes in the following parameter-list, the !-- ------- version number stored in the variable binary_version has to be !-- increased. The same changes must also be done in the parameter- !-- list in read_var_list. WRITE ( 14 ) 'advected_distance_x ' WRITE ( 14 ) advected_distance_x WRITE ( 14 ) 'advected_distance_y ' WRITE ( 14 ) advected_distance_y WRITE ( 14 ) 'alpha_surface ' WRITE ( 14 ) alpha_surface WRITE ( 14 ) 'average_count_pr ' WRITE ( 14 ) average_count_pr WRITE ( 14 ) 'average_count_sp ' WRITE ( 14 ) average_count_sp WRITE ( 14 ) 'average_count_3d ' WRITE ( 14 ) average_count_3d WRITE ( 14 ) 'bc_e_b ' WRITE ( 14 ) bc_e_b WRITE ( 14 ) 'bc_lr ' WRITE ( 14 ) bc_lr WRITE ( 14 ) 'bc_ns ' WRITE ( 14 ) bc_ns WRITE ( 14 ) 'bc_p_b ' WRITE ( 14 ) bc_p_b WRITE ( 14 ) 'bc_p_t ' WRITE ( 14 ) bc_p_t WRITE ( 14 ) 'bc_pt_b ' WRITE ( 14 ) bc_pt_b WRITE ( 14 ) 'bc_pt_t ' WRITE ( 14 ) bc_pt_t WRITE ( 14 ) 'bc_pt_t_val ' WRITE ( 14 ) bc_pt_t_val WRITE ( 14 ) 'bc_q_b ' WRITE ( 14 ) bc_q_b WRITE ( 14 ) 'bc_q_t ' WRITE ( 14 ) bc_q_t WRITE ( 14 ) 'bc_q_t_val ' WRITE ( 14 ) bc_q_t_val WRITE ( 14 ) 'bc_s_b ' WRITE ( 14 ) bc_s_b WRITE ( 14 ) 'bc_s_t ' WRITE ( 14 ) bc_s_t WRITE ( 14 ) 'bc_sa_t ' WRITE ( 14 ) bc_sa_t WRITE ( 14 ) 'bc_uv_b ' WRITE ( 14 ) bc_uv_b WRITE ( 14 ) 'bc_uv_t ' WRITE ( 14 ) bc_uv_t WRITE ( 14 ) 'bottom_salinityflux ' WRITE ( 14 ) bottom_salinityflux WRITE ( 14 ) 'building_height ' WRITE ( 14 ) building_height WRITE ( 14 ) 'building_length_x ' WRITE ( 14 ) building_length_x WRITE ( 14 ) 'building_length_y ' WRITE ( 14 ) building_length_y WRITE ( 14 ) 'building_wall_left ' WRITE ( 14 ) building_wall_left WRITE ( 14 ) 'building_wall_south ' WRITE ( 14 ) building_wall_south WRITE ( 14 ) 'call_psolver_at_all_substeps ' WRITE ( 14 ) call_psolver_at_all_substeps WRITE ( 14 ) 'canopy_mode ' WRITE ( 14 ) canopy_mode WRITE ( 14 ) 'canyon_height ' WRITE ( 14 ) canyon_height WRITE ( 14 ) 'canyon_width_x ' WRITE ( 14 ) canyon_width_x WRITE ( 14 ) 'canyon_width_y ' WRITE ( 14 ) canyon_width_y WRITE ( 14 ) 'canyon_wall_left ' WRITE ( 14 ) canyon_wall_left WRITE ( 14 ) 'canyon_wall_south ' WRITE ( 14 ) canyon_wall_south WRITE ( 14 ) 'c_sedimentation ' WRITE ( 14 ) c_sedimentation WRITE ( 14 ) 'cfl_factor ' WRITE ( 14 ) cfl_factor WRITE ( 14 ) 'cloud_droplets ' WRITE ( 14 ) cloud_droplets WRITE ( 14 ) 'cloud_physics ' WRITE ( 14 ) cloud_physics WRITE ( 14 ) 'cloud_scheme ' WRITE ( 14 ) cloud_scheme WRITE ( 14 ) 'collective_wait ' WRITE ( 14 ) collective_wait WRITE ( 14 ) 'conserve_volume_flow ' WRITE ( 14 ) conserve_volume_flow WRITE ( 14 ) 'conserve_volume_flow_mode ' WRITE ( 14 ) conserve_volume_flow_mode WRITE ( 14 ) 'coupling_start_time ' WRITE ( 14 ) coupling_start_time WRITE ( 14 ) 'current_timestep_number ' WRITE ( 14 ) current_timestep_number WRITE ( 14 ) 'curvature_solution_effects ' WRITE ( 14 ) curvature_solution_effects WRITE ( 14 ) 'cthf ' WRITE ( 14 ) cthf WRITE ( 14 ) 'cycle_mg ' WRITE ( 14 ) cycle_mg WRITE ( 14 ) 'damp_level_1d ' WRITE ( 14 ) damp_level_1d WRITE ( 14 ) 'dissipation_1d ' WRITE ( 14 ) dissipation_1d WRITE ( 14 ) 'dp_external ' WRITE ( 14 ) dp_external WRITE ( 14 ) 'dp_level_b ' WRITE ( 14 ) dp_level_b WRITE ( 14 ) 'dp_smooth ' WRITE ( 14 ) dp_smooth WRITE ( 14 ) 'dpdxy ' WRITE ( 14 ) dpdxy WRITE ( 14 ) 'drag_coefficient ' WRITE ( 14 ) drag_coefficient WRITE ( 14 ) 'drizzle ' WRITE ( 14 ) drizzle WRITE ( 14 ) 'dt_pr_1d ' WRITE ( 14 ) dt_pr_1d WRITE ( 14 ) 'dt_run_control_1d ' WRITE ( 14 ) dt_run_control_1d WRITE ( 14 ) 'dt_3d ' WRITE ( 14 ) dt_3d WRITE ( 14 ) 'dvrp_filecount ' WRITE ( 14 ) dvrp_filecount WRITE ( 14 ) 'dx ' WRITE ( 14 ) dx WRITE ( 14 ) 'dy ' WRITE ( 14 ) dy WRITE ( 14 ) 'dz ' WRITE ( 14 ) dz WRITE ( 14 ) 'dz_max ' WRITE ( 14 ) dz_max WRITE ( 14 ) 'dz_stretch_factor ' WRITE ( 14 ) dz_stretch_factor WRITE ( 14 ) 'dz_stretch_level ' WRITE ( 14 ) dz_stretch_level WRITE ( 14 ) 'e_min ' WRITE ( 14 ) e_min WRITE ( 14 ) 'end_time_1d ' WRITE ( 14 ) end_time_1d WRITE ( 14 ) 'fft_method ' WRITE ( 14 ) fft_method WRITE ( 14 ) 'first_call_lpm ' WRITE ( 14 ) first_call_lpm WRITE ( 14 ) 'galilei_transformation ' WRITE ( 14 ) galilei_transformation WRITE ( 14 ) 'hom ' WRITE ( 14 ) hom WRITE ( 14 ) 'hom_sum ' WRITE ( 14 ) hom_sum WRITE ( 14 ) 'humidity ' WRITE ( 14 ) humidity IF ( ALLOCATED( inflow_damping_factor ) ) THEN WRITE ( 14 ) 'inflow_damping_factor ' WRITE ( 14 ) inflow_damping_factor ENDIF WRITE ( 14 ) 'inflow_damping_height ' WRITE ( 14 ) inflow_damping_height WRITE ( 14 ) 'inflow_damping_width ' WRITE ( 14 ) inflow_damping_width WRITE ( 14 ) 'inflow_disturbance_begin ' WRITE ( 14 ) inflow_disturbance_begin WRITE ( 14 ) 'inflow_disturbance_end ' WRITE ( 14 ) inflow_disturbance_end WRITE ( 14 ) 'km_constant ' WRITE ( 14 ) km_constant WRITE ( 14 ) 'lad ' WRITE ( 14 ) lad WRITE ( 14 ) 'lad_surface ' WRITE ( 14 ) lad_surface WRITE ( 14 ) 'lad_vertical_gradient ' WRITE ( 14 ) lad_vertical_gradient WRITE ( 14 ) 'lad_vertical_gradient_level ' WRITE ( 14 ) lad_vertical_gradient_level WRITE ( 14 ) 'lad_vertical_gradient_level_in' WRITE ( 14 ) lad_vertical_gradient_level_ind WRITE ( 14 ) 'large_scale_subsidence ' WRITE ( 14 ) large_scale_subsidence WRITE ( 14 ) 'leaf_surface_concentration ' WRITE ( 14 ) leaf_surface_concentration WRITE ( 14 ) 'limiter_sedimentation ' WRITE ( 14 ) limiter_sedimentation WRITE ( 14 ) 'loop_optimization ' WRITE ( 14 ) loop_optimization WRITE ( 14 ) 'masking_method ' WRITE ( 14 ) masking_method IF ( ALLOCATED( mean_inflow_profiles ) ) THEN WRITE ( 14 ) 'mean_inflow_profiles ' WRITE ( 14 ) mean_inflow_profiles ENDIF WRITE ( 14 ) 'mg_cycles ' WRITE ( 14 ) mg_cycles WRITE ( 14 ) 'mg_switch_to_pe0_level ' WRITE ( 14 ) mg_switch_to_pe0_level WRITE ( 14 ) 'mixing_length_1d ' WRITE ( 14 ) mixing_length_1d WRITE ( 14 ) 'momentum_advec ' WRITE ( 14 ) momentum_advec WRITE ( 14 ) 'nc_const ' WRITE ( 14 ) nc_const WRITE ( 14 ) 'netcdf_precision ' WRITE ( 14 ) netcdf_precision WRITE ( 14 ) 'neutral ' WRITE ( 14 ) neutral WRITE ( 14 ) 'ngsrb ' WRITE ( 14 ) ngsrb WRITE ( 14 ) 'nsor ' WRITE ( 14 ) nsor WRITE ( 14 ) 'nsor_ini ' WRITE ( 14 ) nsor_ini WRITE ( 14 ) 'nx ' WRITE ( 14 ) nx WRITE ( 14 ) 'ny ' WRITE ( 14 ) ny WRITE ( 14 ) 'ocean ' WRITE ( 14 ) ocean WRITE ( 14 ) 'old_dt ' WRITE ( 14 ) old_dt WRITE ( 14 ) 'omega ' WRITE ( 14 ) omega WRITE ( 14 ) 'omega_sor ' WRITE ( 14 ) omega_sor WRITE ( 14 ) 'output_for_t0 ' WRITE ( 14 ) output_for_t0 WRITE ( 14 ) 'passive_scalar ' WRITE ( 14 ) passive_scalar WRITE ( 14 ) 'pch_index ' WRITE ( 14 ) pch_index WRITE ( 14 ) 'phi ' WRITE ( 14 ) phi WRITE ( 14 ) 'plant_canopy ' WRITE ( 14 ) plant_canopy WRITE ( 14 ) 'prandtl_layer ' WRITE ( 14 ) prandtl_layer WRITE ( 14 ) 'prandtl_number ' WRITE ( 14 ) prandtl_number WRITE ( 14 ) 'precipitation ' WRITE ( 14 ) precipitation WRITE ( 14 ) 'psolver ' WRITE ( 14 ) psolver WRITE ( 14 ) 'pt_damping_factor ' WRITE ( 14 ) pt_damping_factor WRITE ( 14 ) 'pt_damping_width ' WRITE ( 14 ) pt_damping_width WRITE ( 14 ) 'pt_init ' WRITE ( 14 ) pt_init WRITE ( 14 ) 'pt_reference ' WRITE ( 14 ) pt_reference WRITE ( 14 ) 'pt_surface ' WRITE ( 14 ) pt_surface WRITE ( 14 ) 'pt_surface_initial_change ' WRITE ( 14 ) pt_surface_initial_change WRITE ( 14 ) 'pt_vertical_gradient ' WRITE ( 14 ) pt_vertical_gradient WRITE ( 14 ) 'pt_vertical_gradient_level ' WRITE ( 14 ) pt_vertical_gradient_level WRITE ( 14 ) 'pt_vertical_gradient_level_ind' WRITE ( 14 ) pt_vertical_gradient_level_ind WRITE ( 14 ) 'q_init ' WRITE ( 14 ) q_init WRITE ( 14 ) 'q_surface ' WRITE ( 14 ) q_surface WRITE ( 14 ) 'q_surface_initial_change ' WRITE ( 14 ) q_surface_initial_change WRITE ( 14 ) 'q_vertical_gradient ' WRITE ( 14 ) q_vertical_gradient WRITE ( 14 ) 'q_vertical_gradient_level ' WRITE ( 14 ) q_vertical_gradient_level WRITE ( 14 ) 'q_vertical_gradient_level_ind ' WRITE ( 14 ) q_vertical_gradient_level_ind WRITE ( 14 ) 'radiation ' WRITE ( 14 ) radiation WRITE ( 14 ) 'random_generator ' WRITE ( 14 ) random_generator WRITE ( 14 ) 'random_heatflux ' WRITE ( 14 ) random_heatflux WRITE ( 14 ) 'rayleigh_damping_factor ' WRITE ( 14 ) rayleigh_damping_factor WRITE ( 14 ) 'rayleigh_damping_height ' WRITE ( 14 ) rayleigh_damping_height WRITE ( 14 ) 'recycling_width ' WRITE ( 14 ) recycling_width WRITE ( 14 ) 'residual_limit ' WRITE ( 14 ) residual_limit WRITE ( 14 ) 'rif_max ' WRITE ( 14 ) rif_max WRITE ( 14 ) 'rif_min ' WRITE ( 14 ) rif_min WRITE ( 14 ) 'roughness_length ' WRITE ( 14 ) roughness_length WRITE ( 14 ) 'runnr ' WRITE ( 14 ) runnr WRITE ( 14 ) 'run_coupled ' WRITE ( 14 ) run_coupled WRITE ( 14 ) 'sa_init ' WRITE ( 14 ) sa_init WRITE ( 14 ) 'sa_surface ' WRITE ( 14 ) sa_surface WRITE ( 14 ) 'sa_vertical_gradient ' WRITE ( 14 ) sa_vertical_gradient WRITE ( 14 ) 'sa_vertical_gradient_level ' WRITE ( 14 ) sa_vertical_gradient_level WRITE ( 14 ) 'scalar_advec ' WRITE ( 14 ) scalar_advec WRITE ( 14 ) 'scalar_exchange_coefficient ' WRITE ( 14 ) scalar_exchange_coefficient WRITE ( 14 ) 'simulated_time ' WRITE ( 14 ) simulated_time WRITE ( 14 ) 'surface_heatflux ' WRITE ( 14 ) surface_heatflux WRITE ( 14 ) 'surface_pressure ' WRITE ( 14 ) surface_pressure WRITE ( 14 ) 'surface_scalarflux ' WRITE ( 14 ) surface_scalarflux WRITE ( 14 ) 'surface_waterflux ' WRITE ( 14 ) surface_waterflux WRITE ( 14 ) 's_surface ' WRITE ( 14 ) s_surface WRITE ( 14 ) 's_surface_initial_change ' WRITE ( 14 ) s_surface_initial_change WRITE ( 14 ) 's_vertical_gradient ' WRITE ( 14 ) s_vertical_gradient WRITE ( 14 ) 's_vertical_gradient_level ' WRITE ( 14 ) s_vertical_gradient_level WRITE ( 14 ) 'time_coupling ' WRITE ( 14 ) time_coupling WRITE ( 14 ) 'time_disturb ' WRITE ( 14 ) time_disturb WRITE ( 14 ) 'time_domask ' WRITE ( 14 ) time_domask WRITE ( 14 ) 'time_dopr ' WRITE ( 14 ) time_dopr WRITE ( 14 ) 'time_dopr_av ' WRITE ( 14 ) time_dopr_av WRITE ( 14 ) 'time_dopr_listing ' WRITE ( 14 ) time_dopr_listing WRITE ( 14 ) 'time_dopts ' WRITE ( 14 ) time_dopts WRITE ( 14 ) 'time_dosp ' WRITE ( 14 ) time_dosp WRITE ( 14 ) 'time_dots ' WRITE ( 14 ) time_dots WRITE ( 14 ) 'time_do2d_xy ' WRITE ( 14 ) time_do2d_xy WRITE ( 14 ) 'time_do2d_xz ' WRITE ( 14 ) time_do2d_xz WRITE ( 14 ) 'time_do2d_yz ' WRITE ( 14 ) time_do2d_yz WRITE ( 14 ) 'time_do3d ' WRITE ( 14 ) time_do3d WRITE ( 14 ) 'time_do_av ' WRITE ( 14 ) time_do_av WRITE ( 14 ) 'time_do_sla ' WRITE ( 14 ) time_do_sla WRITE ( 14 ) 'time_dvrp ' WRITE ( 14 ) time_dvrp WRITE ( 14 ) 'time_restart ' WRITE ( 14 ) time_restart WRITE ( 14 ) 'time_run_control ' WRITE ( 14 ) time_run_control WRITE ( 14 ) 'time_since_reference_point ' WRITE ( 14 ) time_since_reference_point WRITE ( 14 ) 'time_sort_particles ' WRITE ( 14 ) time_sort_particles WRITE ( 14 ) 'timestep_scheme ' WRITE ( 14 ) timestep_scheme WRITE ( 14 ) 'topography ' WRITE ( 14 ) topography WRITE ( 14 ) 'topography_grid_convention ' WRITE ( 14 ) topography_grid_convention WRITE ( 14 ) 'top_heatflux ' WRITE ( 14 ) top_heatflux WRITE ( 14 ) 'top_momentumflux_u ' WRITE ( 14 ) top_momentumflux_u WRITE ( 14 ) 'top_momentumflux_v ' WRITE ( 14 ) top_momentumflux_v WRITE ( 14 ) 'top_salinityflux ' WRITE ( 14 ) top_salinityflux WRITE ( 14 ) 'tsc ' WRITE ( 14 ) tsc WRITE ( 14 ) 'turbulence ' WRITE ( 14 ) turbulence WRITE ( 14 ) 'turbulent_inflow ' WRITE ( 14 ) turbulent_inflow WRITE ( 14 ) 'u_bulk ' WRITE ( 14 ) u_bulk WRITE ( 14 ) 'u_init ' WRITE ( 14 ) u_init WRITE ( 14 ) 'u_max ' WRITE ( 14 ) u_max WRITE ( 14 ) 'u_max_ijk ' WRITE ( 14 ) u_max_ijk WRITE ( 14 ) 'ug ' WRITE ( 14 ) ug WRITE ( 14 ) 'ug_surface ' WRITE ( 14 ) ug_surface WRITE ( 14 ) 'ug_vertical_gradient ' WRITE ( 14 ) ug_vertical_gradient WRITE ( 14 ) 'ug_vertical_gradient_level ' WRITE ( 14 ) ug_vertical_gradient_level WRITE ( 14 ) 'ug_vertical_gradient_level_ind' WRITE ( 14 ) ug_vertical_gradient_level_ind WRITE ( 14 ) 'use_surface_fluxes ' WRITE ( 14 ) use_surface_fluxes WRITE ( 14 ) 'use_top_fluxes ' WRITE ( 14 ) use_top_fluxes WRITE ( 14 ) 'use_ug_for_galilei_tr ' WRITE ( 14 ) use_ug_for_galilei_tr WRITE ( 14 ) 'use_upstream_for_tke ' WRITE ( 14 ) use_upstream_for_tke WRITE ( 14 ) 'v_bulk ' WRITE ( 14 ) v_bulk WRITE ( 14 ) 'v_init ' WRITE ( 14 ) v_init WRITE ( 14 ) 'v_max ' WRITE ( 14 ) v_max WRITE ( 14 ) 'v_max_ijk ' WRITE ( 14 ) v_max_ijk WRITE ( 14 ) 'ventilation_effect ' WRITE ( 14 ) ventilation_effect WRITE ( 14 ) 'vg ' WRITE ( 14 ) vg WRITE ( 14 ) 'vg_surface ' WRITE ( 14 ) vg_surface WRITE ( 14 ) 'vg_vertical_gradient ' WRITE ( 14 ) vg_vertical_gradient WRITE ( 14 ) 'vg_vertical_gradient_level ' WRITE ( 14 ) vg_vertical_gradient_level WRITE ( 14 ) 'vg_vertical_gradient_level_ind' WRITE ( 14 ) vg_vertical_gradient_level_ind WRITE ( 14 ) 'volume_flow_area ' WRITE ( 14 ) volume_flow_area WRITE ( 14 ) 'volume_flow_initial ' WRITE ( 14 ) volume_flow_initial WRITE ( 14 ) 'wall_adjustment ' WRITE ( 14 ) wall_adjustment WRITE ( 14 ) 'subs_vertical_gradient ' WRITE ( 14 ) subs_vertical_gradient WRITE ( 14 ) 'subs_vertical_gradient_level ' WRITE ( 14 ) subs_vertical_gradient_level WRITE ( 14 ) 'subs_vertical_gradient_level_i' WRITE ( 14 ) subs_vertical_gradient_level_i WRITE ( 14 ) 'w_max ' WRITE ( 14 ) w_max WRITE ( 14 ) 'w_max_ijk ' WRITE ( 14 ) w_max_ijk WRITE ( 14 ) 'z0h_factor ' WRITE ( 14 ) z0h_factor ! !-- Set the end-of-file mark WRITE ( 14 ) '*** end *** ' END SUBROUTINE write_var_list