!> @file write_restart_data_mod.f90 !--------------------------------------------------------------------------------------------------! ! This file is part of the PALM model system. ! ! PALM is free software: you can redistribute it and/or modify it under the terms of the GNU General ! Public License as published by the Free Software Foundation, either version 3 of the License, or ! (at your option) any later version. ! ! PALM is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the ! implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General ! Public License for more details. ! ! You should have received a copy of the GNU General Public License along with PALM. If not, see ! . ! ! Copyright 1997-2020 Leibniz Universitaet Hannover !--------------------------------------------------------------------------------------------------! ! ! Current revisions: ! ----------------- ! ! ! Former revisions: ! ----------------- ! $Id: write_restart_data_mod.f90 4564 2020-06-12 14:03:36Z oliver.maas $ ! Vertical nesting method of Huq et al. (2019) removed ! ! 4536 2020-05-17 17:24:13Z raasch ! binary version incremented ! ! 4535 2020-05-15 12:07:23Z raasch ! bugfix for restart data format query ! ! 4514 2020-04-30 16:29:59Z suehring ! qsurf and ssurf added ! ! 4495 2020-04-13 20:11:20Z raasch ! restart data handling with MPI-IO added ! ! 4489 2020-04-04 10:54:08Z raasch ! file re-formatted to follow the PALM coding standard ! ! 4360 2020-01-07 11:25:50Z suehring ! - Move 2-m potential temperature to diagnostic_output_quantities. ! ! 4301 2019-11-22 12:09:09Z oliver.maas ! removed recycling_yshift ! ! 4227 2019-09-10 18:04:34Z gronemeier ! implement new palm_date_time_mod and increased binary version ! ! 4146 2019-08-07 07:47:36Z gronemeier ! Corrected "Former revisions" section ! ! 4101 2019-07-17 15:14:26Z gronemeier ! remove old_dt ! ! 4039 2019-06-18 10:32:41Z suehring ! Modularize diagnostic output ! ! 4017 2019-06-06 12:16:46Z schwenkel ! output of turbulence intensity added ! ! 3988 2019-05-22 11:32:37Z kanani ! + time_virtual_measurement (to enable steering of output interval) ! ! 3936 2019-04-26 15:38:02Z kanani ! Enable time-averaged output of theta_2m* with restarts ! ! 3668 2019-01-14 12:49:24Z maronga ! Implementation of the PALM module interface ! ! 2894 2018-03-15 09:17:58Z Giersch ! Initial revision ! ! ! Description: ! ------------ !> Writes restart data into binary file(s) for restart runs. !--------------------------------------------------------------------------------------------------! MODULE write_restart_data_mod USE arrays_3d, & ONLY: e, inflow_damping_factor, kh, km, mean_inflow_profiles, p, pt, pt_init, q, q_init, & ql, ref_state, s, s_init, u, u_init, ug, u_m_l, u_m_n, u_m_r, u_m_s, v, v_init, vg, & v_m_l, v_m_n, v_m_r, v_m_s, vpt, w, w_m_l, w_m_n, w_m_r, w_m_s USE averaging USE bulk_cloud_model_mod, & ONLY: bulk_cloud_model USE control_parameters USE grid_variables, & ONLY: dx, dy USE gust_mod, & ONLY: gust_module_enabled USE indices, & ONLY: nx, nxl, nxr, ny, nys, nyn, nz, nzb, nzt USE kinds USE model_1d_mod, & ONLY: damp_level_1d, dt_pr_1d, dt_run_control_1d, end_time_1d USE module_interface, & ONLY: module_interface_wrd_global, & module_interface_wrd_local USE netcdf_interface, & ONLY: netcdf_precision, output_for_t0 USE particle_attributes, & ONLY: particle_advection USE pegrid, & ONLY: collective_wait, hor_index_bounds, myid, numprocs USE radiation_model_mod, & ONLY: time_radiation USE random_function_mod, & ONLY: random_iv, random_iy USE random_generator_parallel, & ONLY: id_random_array, seq_random_array USE restart_data_mpi_io_mod, & ONLY: wrd_mpi_io, wrd_mpi_io_global_array USE spectra_mod, & ONLY: average_count_sp, spectrum_x, spectrum_y USE statistics, & ONLY: hom, hom_sum, statistic_regions, u_max, u_max_ijk, v_max, v_max_ijk, w_max, & w_max_ijk, z_i USE surface_mod, & ONLY: surface_wrd_local USE user, & ONLY: user_module_enabled USE virtual_measurement_mod, & ONLY: time_virtual_measurement IMPLICIT NONE INTERFACE wrd_global MODULE PROCEDURE wrd_global END INTERFACE wrd_global INTERFACE wrd_local MODULE PROCEDURE wrd_local END INTERFACE wrd_local PUBLIC wrd_local, wrd_global CONTAINS ! Description: ! ------------ !> Global data of control variables and arrays is written out for restarts. !> In case of output in Fortran binary format, this information is only written to the file !> opened by PE0. !--------------------------------------------------------------------------------------------------! SUBROUTINE wrd_global CHARACTER(LEN=10) :: binary_version_global !< CHARACTER(LEN=20) :: tmp_name !< temporary variable INTEGER :: i !< loop index binary_version_global = '5.0' IF ( restart_data_format_output == 'fortran_binary' ) THEN ! !-- Output in Fortran binary format CALL wrd_write_string( 'binary_version_global' ) WRITE ( 14 ) binary_version_global CALL wrd_write_string( 'numprocs' ) WRITE ( 14 ) numprocs CALL wrd_write_string( 'hor_index_bounds' ) WRITE ( 14 ) hor_index_bounds CALL wrd_write_string( 'nz' ) WRITE ( 14 ) nz CALL wrd_write_string( 'max_pr_user' ) WRITE ( 14 ) max_pr_user CALL wrd_write_string( 'statistic_regions' ) WRITE ( 14 ) statistic_regions ! !-- Caution: After changes in the following parameter-list, the version number stored in the !-- -------- variable binary_version_global has to be increased. The same changes must also be !-- done in the parameter-list in rrd_global. CALL wrd_write_string( 'advected_distance_x' ) WRITE ( 14 ) advected_distance_x CALL wrd_write_string( 'advected_distance_y' ) WRITE ( 14 ) advected_distance_y CALL wrd_write_string( 'alpha_surface' ) WRITE ( 14 ) alpha_surface CALL wrd_write_string( 'average_count_pr' ) WRITE ( 14 ) average_count_pr CALL wrd_write_string( 'average_count_sp' ) WRITE ( 14 ) average_count_sp CALL wrd_write_string( 'average_count_3d' ) WRITE ( 14 ) average_count_3d CALL wrd_write_string( 'bc_e_b' ) WRITE ( 14 ) bc_e_b CALL wrd_write_string( 'bc_lr' ) WRITE ( 14 ) bc_lr CALL wrd_write_string( 'bc_ns' ) WRITE ( 14 ) bc_ns CALL wrd_write_string( 'bc_p_b' ) WRITE ( 14 ) bc_p_b CALL wrd_write_string( 'bc_p_t' ) WRITE ( 14 ) bc_p_t CALL wrd_write_string( 'bc_pt_b' ) WRITE ( 14 ) bc_pt_b CALL wrd_write_string( 'bc_pt_t' ) WRITE ( 14 ) bc_pt_t CALL wrd_write_string( 'bc_pt_t_val' ) WRITE ( 14 ) bc_pt_t_val CALL wrd_write_string( 'bc_q_b' ) WRITE ( 14 ) bc_q_b CALL wrd_write_string( 'bc_q_t' ) WRITE ( 14 ) bc_q_t CALL wrd_write_string( 'bc_q_t_val' ) WRITE ( 14 ) bc_q_t_val CALL wrd_write_string( 'bc_s_b' ) WRITE ( 14 ) bc_s_b CALL wrd_write_string( 'bc_s_t' ) WRITE ( 14 ) bc_s_t CALL wrd_write_string( 'bc_uv_b' ) WRITE ( 14 ) bc_uv_b CALL wrd_write_string( 'bc_uv_t' ) WRITE ( 14 ) bc_uv_t CALL wrd_write_string( 'building_height' ) WRITE ( 14 ) building_height CALL wrd_write_string( 'building_length_x' ) WRITE ( 14 ) building_length_x CALL wrd_write_string( 'building_length_y' ) WRITE ( 14 ) building_length_y CALL wrd_write_string( 'building_wall_left' ) WRITE ( 14 ) building_wall_left CALL wrd_write_string( 'building_wall_south' ) WRITE ( 14 ) building_wall_south CALL wrd_write_string( 'call_psolver_at_all_substeps' ) WRITE ( 14 ) call_psolver_at_all_substeps CALL wrd_write_string( 'canyon_height' ) WRITE ( 14 ) canyon_height CALL wrd_write_string( 'canyon_wall_left' ) WRITE ( 14 ) canyon_wall_left CALL wrd_write_string( 'canyon_wall_south' ) WRITE ( 14 ) canyon_wall_south CALL wrd_write_string( 'canyon_width_x' ) WRITE ( 14 ) canyon_width_x CALL wrd_write_string( 'canyon_width_y' ) WRITE ( 14 ) canyon_width_y CALL wrd_write_string( 'cfl_factor' ) WRITE ( 14 ) cfl_factor CALL wrd_write_string( 'cloud_droplets' ) WRITE ( 14 ) cloud_droplets CALL wrd_write_string( 'collective_wait' ) WRITE ( 14 ) collective_wait CALL wrd_write_string( 'conserve_volume_flow' ) WRITE ( 14 ) conserve_volume_flow CALL wrd_write_string( 'conserve_volume_flow_mode' ) WRITE ( 14 ) conserve_volume_flow_mode CALL wrd_write_string( 'constant_flux_layer' ) WRITE ( 14 ) constant_flux_layer CALL wrd_write_string( 'coupling_start_time' ) WRITE ( 14 ) coupling_start_time CALL wrd_write_string( 'current_timestep_number' ) WRITE ( 14 ) current_timestep_number CALL wrd_write_string( 'cycle_mg' ) WRITE ( 14 ) cycle_mg CALL wrd_write_string( 'damp_level_1d' ) WRITE ( 14 ) damp_level_1d CALL wrd_write_string( 'origin_date_time' ) WRITE ( 14 ) origin_date_time CALL wrd_write_string( 'dissipation_1d' ) WRITE ( 14 ) dissipation_1d CALL wrd_write_string( 'do2d_xy_time_count' ) WRITE ( 14 ) do2d_xy_time_count CALL wrd_write_string( 'do2d_xz_time_count' ) WRITE ( 14 ) do2d_xz_time_count CALL wrd_write_string( 'do2d_yz_time_count' ) WRITE ( 14 ) do2d_yz_time_count CALL wrd_write_string( 'do3d_time_count' ) WRITE ( 14 ) do3d_time_count CALL wrd_write_string( 'dp_external' ) WRITE ( 14 ) dp_external CALL wrd_write_string( 'dp_level_b' ) WRITE ( 14 ) dp_level_b CALL wrd_write_string( 'dp_smooth' ) WRITE ( 14 ) dp_smooth CALL wrd_write_string( 'dpdxy' ) WRITE ( 14 ) dpdxy CALL wrd_write_string( 'dt_3d' ) WRITE ( 14 ) dt_3d CALL wrd_write_string( 'dt_pr_1d' ) WRITE ( 14 ) dt_pr_1d CALL wrd_write_string( 'dt_run_control_1d' ) WRITE ( 14 ) dt_run_control_1d CALL wrd_write_string( 'dx' ) WRITE ( 14 ) dx CALL wrd_write_string( 'dy' ) WRITE ( 14 ) dy CALL wrd_write_string( 'dz' ) WRITE ( 14 ) dz CALL wrd_write_string( 'dz_max' ) WRITE ( 14 ) dz_max CALL wrd_write_string( 'dz_stretch_factor' ) WRITE ( 14 ) dz_stretch_factor CALL wrd_write_string( 'dz_stretch_factor_array' ) WRITE ( 14 ) dz_stretch_factor_array CALL wrd_write_string( 'dz_stretch_level' ) WRITE ( 14 ) dz_stretch_level CALL wrd_write_string( 'dz_stretch_level_end' ) WRITE ( 14 ) dz_stretch_level_end CALL wrd_write_string( 'dz_stretch_level_start' ) WRITE ( 14 ) dz_stretch_level_start CALL wrd_write_string( 'e_min' ) WRITE ( 14 ) e_min CALL wrd_write_string( 'end_time_1d' ) WRITE ( 14 ) end_time_1d CALL wrd_write_string( 'fft_method' ) WRITE ( 14 ) fft_method CALL wrd_write_string( 'first_call_lpm' ) WRITE ( 14 ) first_call_lpm CALL wrd_write_string( 'galilei_transformation' ) WRITE ( 14 ) galilei_transformation CALL wrd_write_string( 'hom' ) WRITE ( 14 ) hom CALL wrd_write_string( 'hom_sum' ) WRITE ( 14 ) hom_sum CALL wrd_write_string( 'humidity' ) WRITE ( 14 ) humidity IF ( ALLOCATED( inflow_damping_factor ) ) THEN CALL wrd_write_string( 'inflow_damping_factor' ) WRITE ( 14 ) inflow_damping_factor ENDIF CALL wrd_write_string( 'inflow_damping_height' ) WRITE ( 14 ) inflow_damping_height CALL wrd_write_string( 'inflow_damping_width' ) WRITE ( 14 ) inflow_damping_width CALL wrd_write_string( 'inflow_disturbance_begin' ) WRITE ( 14 ) inflow_disturbance_begin CALL wrd_write_string( 'inflow_disturbance_end' ) WRITE ( 14 ) inflow_disturbance_end CALL wrd_write_string( 'km_constant' ) WRITE ( 14 ) km_constant CALL wrd_write_string( 'large_scale_forcing' ) WRITE ( 14 ) large_scale_forcing CALL wrd_write_string( 'large_scale_subsidence' ) WRITE ( 14 ) large_scale_subsidence CALL wrd_write_string( 'latitude' ) WRITE ( 14 ) latitude CALL wrd_write_string( 'longitude' ) WRITE ( 14 ) longitude CALL wrd_write_string( 'loop_optimization' ) WRITE ( 14 ) loop_optimization CALL wrd_write_string( 'masking_method' ) WRITE ( 14 ) masking_method IF ( ALLOCATED( mean_inflow_profiles ) ) THEN CALL wrd_write_string( 'mean_inflow_profiles' ) WRITE ( 14 ) mean_inflow_profiles ENDIF CALL wrd_write_string( 'mg_cycles' ) WRITE ( 14 ) mg_cycles CALL wrd_write_string( 'mg_switch_to_pe0_level' ) WRITE ( 14 ) mg_switch_to_pe0_level CALL wrd_write_string( 'mixing_length_1d' ) WRITE ( 14 ) mixing_length_1d CALL wrd_write_string( 'momentum_advec' ) WRITE ( 14 ) momentum_advec CALL wrd_write_string( 'netcdf_precision' ) WRITE ( 14 ) netcdf_precision CALL wrd_write_string( 'neutral' ) WRITE ( 14 ) neutral CALL wrd_write_string( 'ngsrb' ) WRITE ( 14 ) ngsrb CALL wrd_write_string( 'nsor' ) WRITE ( 14 ) nsor CALL wrd_write_string( 'nsor_ini' ) WRITE ( 14 ) nsor_ini CALL wrd_write_string( 'nudging' ) WRITE ( 14 ) nudging CALL wrd_write_string( 'num_leg' ) WRITE ( 14 ) num_leg CALL wrd_write_string( 'nx' ) WRITE ( 14 ) nx CALL wrd_write_string( 'ny' ) WRITE ( 14 ) ny CALL wrd_write_string( 'ocean_mode' ) WRITE ( 14 ) ocean_mode CALL wrd_write_string( 'omega' ) WRITE ( 14 ) omega CALL wrd_write_string( 'omega_sor' ) WRITE ( 14 ) omega_sor CALL wrd_write_string( 'output_for_t0' ) WRITE ( 14 ) output_for_t0 CALL wrd_write_string( 'passive_scalar' ) WRITE ( 14 ) passive_scalar CALL wrd_write_string( 'prandtl_number' ) WRITE ( 14 ) prandtl_number CALL wrd_write_string( 'psolver' ) WRITE ( 14 ) psolver CALL wrd_write_string( 'pt_damping_factor' ) WRITE ( 14 ) pt_damping_factor CALL wrd_write_string( 'pt_damping_width' ) WRITE ( 14 ) pt_damping_width CALL wrd_write_string( 'pt_init' ) WRITE ( 14 ) pt_init CALL wrd_write_string( 'pt_reference' ) WRITE ( 14 ) pt_reference CALL wrd_write_string( 'pt_surface' ) WRITE ( 14 ) pt_surface CALL wrd_write_string( 'pt_surface_initial_change' ) WRITE ( 14 ) pt_surface_initial_change CALL wrd_write_string( 'pt_vertical_gradient' ) WRITE ( 14 ) pt_vertical_gradient CALL wrd_write_string( 'pt_vertical_gradient_level' ) WRITE ( 14 ) pt_vertical_gradient_level CALL wrd_write_string( 'pt_vertical_gradient_level_ind' ) WRITE ( 14 ) pt_vertical_gradient_level_ind CALL wrd_write_string( 'q_init' ) WRITE ( 14 ) q_init CALL wrd_write_string( 'q_surface' ) WRITE ( 14 ) q_surface CALL wrd_write_string( 'q_surface_initial_change' ) WRITE ( 14 ) q_surface_initial_change CALL wrd_write_string( 'q_vertical_gradient' ) WRITE ( 14 ) q_vertical_gradient CALL wrd_write_string( 'q_vertical_gradient_level' ) WRITE ( 14 ) q_vertical_gradient_level CALL wrd_write_string( 'q_vertical_gradient_level_ind' ) WRITE ( 14 ) q_vertical_gradient_level_ind CALL wrd_write_string( 'random_generator' ) WRITE ( 14 ) random_generator CALL wrd_write_string( 'random_heatflux' ) WRITE ( 14 ) random_heatflux CALL wrd_write_string( 'rans_mode' ) WRITE ( 14 ) rans_mode CALL wrd_write_string( 'rayleigh_damping_factor' ) WRITE ( 14 ) rayleigh_damping_factor CALL wrd_write_string( 'rayleigh_damping_height' ) WRITE ( 14 ) rayleigh_damping_height CALL wrd_write_string( 'recycling_width' ) WRITE ( 14 ) recycling_width CALL wrd_write_string( 'ref_state' ) WRITE ( 14 ) ref_state CALL wrd_write_string( 'reference_state' ) WRITE ( 14 ) reference_state CALL wrd_write_string( 'residual_limit' ) WRITE ( 14 ) residual_limit CALL wrd_write_string( 'roughness_length' ) WRITE ( 14 ) roughness_length CALL wrd_write_string( 'run_coupled' ) WRITE ( 14 ) run_coupled CALL wrd_write_string( 'runnr' ) WRITE ( 14 ) runnr CALL wrd_write_string( 's_init' ) WRITE ( 14 ) s_init CALL wrd_write_string( 's_surface' ) WRITE ( 14 ) s_surface CALL wrd_write_string( 's_surface_initial_change' ) WRITE ( 14 ) s_surface_initial_change CALL wrd_write_string( 's_vertical_gradient' ) WRITE ( 14 ) s_vertical_gradient CALL wrd_write_string( 's_vertical_gradient_level' ) WRITE ( 14 ) s_vertical_gradient_level CALL wrd_write_string( 's_vertical_gradient_level_ind' ) WRITE ( 14 ) s_vertical_gradient_level_ind CALL wrd_write_string( 'scalar_advec' ) WRITE ( 14 ) scalar_advec CALL wrd_write_string( 'simulated_time' ) WRITE ( 14 ) simulated_time IF ( ALLOCATED( spectrum_x ) ) THEN CALL wrd_write_string( 'spectrum_x' ) WRITE ( 14 ) spectrum_x CALL wrd_write_string( 'spectrum_y' ) WRITE ( 14 ) spectrum_y ENDIF CALL wrd_write_string( 'spinup_time ' ) WRITE ( 14 ) spinup_time CALL wrd_write_string( 'subs_vertical_gradient' ) WRITE ( 14 ) subs_vertical_gradient CALL wrd_write_string( 'subs_vertical_gradient_level' ) WRITE ( 14 ) subs_vertical_gradient_level CALL wrd_write_string( 'subs_vertical_gradient_level_i' ) WRITE ( 14 ) subs_vertical_gradient_level_i CALL wrd_write_string( 'surface_heatflux' ) WRITE ( 14 ) surface_heatflux CALL wrd_write_string( 'surface_pressure' ) WRITE ( 14 ) surface_pressure CALL wrd_write_string( 'surface_scalarflux' ) WRITE ( 14 ) surface_scalarflux CALL wrd_write_string( 'surface_waterflux' ) WRITE ( 14 ) surface_waterflux CALL wrd_write_string( 'time_coupling' ) WRITE ( 14 ) time_coupling CALL wrd_write_string( 'time_disturb' ) WRITE ( 14 ) time_disturb CALL wrd_write_string( 'time_do2d_xy' ) WRITE ( 14 ) time_do2d_xy CALL wrd_write_string( 'time_do2d_xz' ) WRITE ( 14 ) time_do2d_xz CALL wrd_write_string( 'time_do2d_yz' ) WRITE ( 14 ) time_do2d_yz CALL wrd_write_string( 'time_do3d' ) WRITE ( 14 ) time_do3d CALL wrd_write_string( 'time_do_av' ) WRITE ( 14 ) time_do_av CALL wrd_write_string( 'time_do_sla' ) WRITE ( 14 ) time_do_sla CALL wrd_write_string( 'time_domask' ) WRITE ( 14 ) time_domask CALL wrd_write_string( 'time_dopr' ) WRITE ( 14 ) time_dopr CALL wrd_write_string( 'time_dopr_av' ) WRITE ( 14 ) time_dopr_av CALL wrd_write_string( 'time_dopr_listing' ) WRITE ( 14 ) time_dopr_listing CALL wrd_write_string( 'time_dopts' ) WRITE ( 14 ) time_dopts CALL wrd_write_string( 'time_dosp' ) WRITE ( 14 ) time_dosp CALL wrd_write_string( 'time_dots' ) WRITE ( 14 ) time_dots CALL wrd_write_string( 'time_radiation' ) WRITE ( 14 ) time_radiation CALL wrd_write_string( 'time_restart' ) WRITE ( 14 ) time_restart CALL wrd_write_string( 'time_run_control' ) WRITE ( 14 ) time_run_control CALL wrd_write_string( 'time_since_reference_point' ) WRITE ( 14 ) time_since_reference_point CALL wrd_write_string( 'time_virtual_measurement' ) WRITE ( 14 ) time_virtual_measurement CALL wrd_write_string( 'timestep_scheme' ) WRITE ( 14 ) timestep_scheme CALL wrd_write_string( 'top_heatflux' ) WRITE ( 14 ) top_heatflux CALL wrd_write_string( 'top_momentumflux_u' ) WRITE ( 14 ) top_momentumflux_u CALL wrd_write_string( 'top_momentumflux_v' ) WRITE ( 14 ) top_momentumflux_v CALL wrd_write_string( 'top_scalarflux' ) WRITE ( 14 ) top_scalarflux CALL wrd_write_string( 'topography' ) WRITE ( 14 ) topography CALL wrd_write_string( 'topography_grid_convention' ) WRITE ( 14 ) topography_grid_convention CALL wrd_write_string( 'tsc' ) WRITE ( 14 ) tsc CALL wrd_write_string( 'tunnel_height' ) WRITE ( 14 ) tunnel_height CALL wrd_write_string( 'tunnel_length' ) WRITE ( 14 ) tunnel_length CALL wrd_write_string( 'tunnel_wall_depth' ) WRITE ( 14 ) tunnel_wall_depth CALL wrd_write_string( 'tunnel_width_x' ) WRITE ( 14 ) tunnel_width_x CALL wrd_write_string( 'tunnel_width_y' ) WRITE ( 14 ) tunnel_width_y CALL wrd_write_string( 'turbulence_closure' ) WRITE ( 14 ) turbulence_closure CALL wrd_write_string( 'turbulent_inflow' ) WRITE ( 14 ) turbulent_inflow CALL wrd_write_string( 'u_bulk' ) WRITE ( 14 ) u_bulk CALL wrd_write_string( 'u_init' ) WRITE ( 14 ) u_init CALL wrd_write_string( 'u_max' ) WRITE ( 14 ) u_max CALL wrd_write_string( 'u_max_ijk' ) WRITE ( 14 ) u_max_ijk CALL wrd_write_string( 'ug' ) WRITE ( 14 ) ug CALL wrd_write_string( 'ug_surface' ) WRITE ( 14 ) ug_surface CALL wrd_write_string( 'ug_vertical_gradient' ) WRITE ( 14 ) ug_vertical_gradient CALL wrd_write_string( 'ug_vertical_gradient_level' ) WRITE ( 14 ) ug_vertical_gradient_level CALL wrd_write_string( 'ug_vertical_gradient_level_ind' ) WRITE ( 14 ) ug_vertical_gradient_level_ind CALL wrd_write_string( 'use_surface_fluxes' ) WRITE ( 14 ) use_surface_fluxes CALL wrd_write_string( 'use_top_fluxes' ) WRITE ( 14 ) use_top_fluxes CALL wrd_write_string( 'use_ug_for_galilei_tr' ) WRITE ( 14 ) use_ug_for_galilei_tr CALL wrd_write_string( 'use_upstream_for_tke' ) WRITE ( 14 ) use_upstream_for_tke CALL wrd_write_string( 'v_bulk' ) WRITE ( 14 ) v_bulk CALL wrd_write_string( 'v_init' ) WRITE ( 14 ) v_init CALL wrd_write_string( 'v_max' ) WRITE ( 14 ) v_max CALL wrd_write_string( 'v_max_ijk' ) WRITE ( 14 ) v_max_ijk CALL wrd_write_string( 'vg' ) WRITE ( 14 ) vg CALL wrd_write_string( 'vg_surface' ) WRITE ( 14 ) vg_surface CALL wrd_write_string( 'vg_vertical_gradient' ) WRITE ( 14 ) vg_vertical_gradient CALL wrd_write_string( 'vg_vertical_gradient_level' ) WRITE ( 14 ) vg_vertical_gradient_level CALL wrd_write_string( 'vg_vertical_gradient_level_ind' ) WRITE ( 14 ) vg_vertical_gradient_level_ind CALL wrd_write_string( 'virtual_flight' ) WRITE ( 14 ) virtual_flight CALL wrd_write_string( 'volume_flow_area' ) WRITE ( 14 ) volume_flow_area CALL wrd_write_string( 'volume_flow_initial' ) WRITE ( 14 ) volume_flow_initial CALL wrd_write_string( 'w_max' ) WRITE ( 14 ) w_max CALL wrd_write_string( 'w_max_ijk' ) WRITE ( 14 ) w_max_ijk CALL wrd_write_string( 'wall_adjustment' ) WRITE ( 14 ) wall_adjustment CALL wrd_write_string( 'wall_heatflux' ) WRITE ( 14 ) wall_heatflux CALL wrd_write_string( 'wall_humidityflux' ) WRITE ( 14 ) wall_humidityflux CALL wrd_write_string( 'wall_scalarflux' ) WRITE ( 14 ) wall_scalarflux CALL wrd_write_string( 'y_shift' ) WRITE ( 14 ) y_shift CALL wrd_write_string( 'z0h_factor' ) WRITE ( 14 ) z0h_factor CALL wrd_write_string( 'zeta_max' ) WRITE ( 14 ) zeta_max CALL wrd_write_string( 'zeta_min' ) WRITE ( 14 ) zeta_min CALL wrd_write_string( 'z_i' ) WRITE ( 14 ) z_i ELSEIF ( restart_data_format_output(1:3) == 'mpi' ) THEN ! !-- Write global restart data using MPI-IO !-- ATTENTION: Arrays need to be written with routine wrd_mpi_io_global_array! CALL wrd_mpi_io( 'binary_version_global', binary_version_global ) CALL wrd_mpi_io( 'numprocs', numprocs ) CALL wrd_mpi_io( 'nz' , nz ) CALL wrd_mpi_io( 'max_pr_user', max_pr_user ) CALL wrd_mpi_io( 'statistic_regions', statistic_regions ) ! !-- Caution: After changes in the following parameter-list, the version number stored in the !-- -------- variable binary_version_global has to be increased. The same changes must also be !-- done in the parameter-list in rrd_global. CALL wrd_mpi_io( 'advected_distance_x', advected_distance_x ) CALL wrd_mpi_io( 'advected_distance_y', advected_distance_y ) CALL wrd_mpi_io( 'alpha_surface', alpha_surface ) CALL wrd_mpi_io( 'average_count_pr', average_count_pr ) CALL wrd_mpi_io( 'average_count_sp', average_count_sp ) CALL wrd_mpi_io( 'average_count_3d', average_count_3d ) CALL wrd_mpi_io( 'bc_e_b', bc_e_b ) CALL wrd_mpi_io( 'bc_lr', bc_lr ) CALL wrd_mpi_io( 'bc_ns', bc_ns ) CALL wrd_mpi_io( 'bc_p_b', bc_p_b ) CALL wrd_mpi_io( 'bc_p_t', bc_p_t ) CALL wrd_mpi_io( 'bc_pt_b', bc_pt_b ) CALL wrd_mpi_io( 'bc_pt_t', bc_pt_t ) CALL wrd_mpi_io( 'bc_pt_t_val', bc_pt_t_val ) CALL wrd_mpi_io( 'bc_q_b', bc_q_b ) CALL wrd_mpi_io( 'bc_q_t', bc_q_t ) CALL wrd_mpi_io( 'bc_q_t_val', bc_q_t_val ) CALL wrd_mpi_io( 'bc_s_b', bc_s_b ) CALL wrd_mpi_io( 'bc_s_t', bc_s_t ) CALL wrd_mpi_io( 'bc_uv_b', bc_uv_b ) CALL wrd_mpi_io( 'bc_uv_t', bc_uv_t ) CALL wrd_mpi_io( 'biometeorology', biometeorology ) CALL wrd_mpi_io( 'building_height', building_height ) CALL wrd_mpi_io( 'building_length_x', building_length_x ) CALL wrd_mpi_io( 'building_length_y', building_length_y ) CALL wrd_mpi_io( 'building_wall_left', building_wall_left ) CALL wrd_mpi_io( 'building_wall_south', building_wall_south ) CALL wrd_mpi_io( 'bulk_cloud_model', bulk_cloud_model ) CALL wrd_mpi_io( 'call_psolver_at_all_substeps', call_psolver_at_all_substeps ) CALL wrd_mpi_io( 'canyon_height', canyon_height ) CALL wrd_mpi_io( 'canyon_wall_left', canyon_wall_left ) CALL wrd_mpi_io( 'canyon_wall_south', canyon_wall_south ) CALL wrd_mpi_io( 'canyon_width_x', canyon_width_x ) CALL wrd_mpi_io( 'canyon_width_y', canyon_width_y ) CALL wrd_mpi_io( 'cfl_factor', cfl_factor ) CALL wrd_mpi_io( 'cloud_droplets', cloud_droplets ) CALL wrd_mpi_io( 'collective_wait', collective_wait ) CALL wrd_mpi_io( 'conserve_volume_flow', conserve_volume_flow ) CALL wrd_mpi_io( 'conserve_volume_flow_mode', conserve_volume_flow_mode ) CALL wrd_mpi_io( 'constant_flux_layer', constant_flux_layer ) CALL wrd_mpi_io( 'coupling_start_time', coupling_start_time ) CALL wrd_mpi_io( 'current_timestep_number', current_timestep_number ) CALL wrd_mpi_io( 'cycle_mg', cycle_mg ) CALL wrd_mpi_io( 'damp_level_1d', damp_level_1d ) CALL wrd_mpi_io( 'dissipation_1d', dissipation_1d ) CALL wrd_mpi_io_global_array( 'do2d_xy_time_count', do2d_xy_time_count ) CALL wrd_mpi_io_global_array( 'do2d_xz_time_count', do2d_xz_time_count ) CALL wrd_mpi_io_global_array( 'do2d_yz_time_count', do2d_yz_time_count ) CALL wrd_mpi_io_global_array( 'do3d_time_count', do3d_time_count ) CALL wrd_mpi_io( 'dp_external', dp_external ) CALL wrd_mpi_io( 'dp_level_b', dp_level_b ) CALL wrd_mpi_io( 'dp_smooth', dp_smooth ) CALL wrd_mpi_io_global_array( 'dpdxy', dpdxy ) CALL wrd_mpi_io( 'dt_3d', dt_3d ) CALL wrd_mpi_io( 'dt_pr_1d', dt_pr_1d ) CALL wrd_mpi_io( 'dt_run_control_1d', dt_run_control_1d ) CALL wrd_mpi_io( 'dx', dx ) CALL wrd_mpi_io( 'dy', dy ) CALL wrd_mpi_io_global_array( 'dz', dz ) CALL wrd_mpi_io( 'dz_max', dz_max ) CALL wrd_mpi_io( 'dz_stretch_factor', dz_stretch_factor ) CALL wrd_mpi_io_global_array( 'dz_stretch_factor_array', dz_stretch_factor_array ) CALL wrd_mpi_io( 'dz_stretch_level', dz_stretch_level ) CALL wrd_mpi_io_global_array( 'dz_stretch_level_end', dz_stretch_level_end ) CALL wrd_mpi_io_global_array( 'dz_stretch_level_start', dz_stretch_level_start ) CALL wrd_mpi_io( 'e_min', e_min ) CALL wrd_mpi_io( 'end_time_1d', end_time_1d ) CALL wrd_mpi_io( 'fft_method', fft_method ) CALL wrd_mpi_io( 'first_call_lpm', first_call_lpm ) CALL wrd_mpi_io( 'galilei_transformation', galilei_transformation ) CALL wrd_mpi_io( 'gust_module_enabled', gust_module_enabled ) CALL wrd_mpi_io_global_array( 'hom', hom ) CALL wrd_mpi_io_global_array( 'hom_sum', hom_sum ) CALL wrd_mpi_io( 'humidity', humidity ) IF ( ALLOCATED( inflow_damping_factor ) ) THEN CALL wrd_mpi_io_global_array( 'inflow_damping_factor', inflow_damping_factor ) ENDIF CALL wrd_mpi_io( 'inflow_damping_height', inflow_damping_height ) CALL wrd_mpi_io( 'inflow_damping_width', inflow_damping_width ) CALL wrd_mpi_io( 'inflow_disturbance_begin', inflow_disturbance_begin ) CALL wrd_mpi_io( 'inflow_disturbance_end', inflow_disturbance_end ) CALL wrd_mpi_io( 'km_constant', km_constant ) CALL wrd_mpi_io( 'large_scale_forcing', large_scale_forcing ) CALL wrd_mpi_io( 'large_scale_subsidence', large_scale_subsidence ) CALL wrd_mpi_io( 'latitude', latitude ) CALL wrd_mpi_io( 'longitude', longitude ) CALL wrd_mpi_io( 'loop_optimization', loop_optimization ) CALL wrd_mpi_io( 'masking_method', masking_method ) IF ( ALLOCATED( mean_inflow_profiles ) ) THEN CALL wrd_mpi_io_global_array( 'mean_inflow_profiles', mean_inflow_profiles ) ENDIF CALL wrd_mpi_io( 'mg_cycles', mg_cycles ) CALL wrd_mpi_io( 'mg_switch_to_pe0_level', mg_switch_to_pe0_level ) CALL wrd_mpi_io( 'mixing_length_1d', mixing_length_1d ) CALL wrd_mpi_io( 'momentum_advec', momentum_advec ) ! !-- There is no module procedure for CHARACTER arrays DO i = 1, SIZE( netcdf_precision, 1 ) WRITE ( tmp_name, '(A,I2.2)' ) 'netcdf_precision_', i CALL wrd_mpi_io( TRIM( tmp_name ), netcdf_precision(i) ) ENDDO CALL wrd_mpi_io( 'neutral', neutral ) CALL wrd_mpi_io( 'ngsrb', ngsrb ) CALL wrd_mpi_io( 'nsor', nsor ) CALL wrd_mpi_io( 'nsor_ini', nsor_ini ) CALL wrd_mpi_io( 'nudging', nudging ) CALL wrd_mpi_io( 'num_leg', num_leg ) CALL wrd_mpi_io( 'nx', nx ) CALL wrd_mpi_io( 'ny', ny ) CALL wrd_mpi_io( 'ocean_mode', ocean_mode ) CALL wrd_mpi_io( 'omega', omega ) CALL wrd_mpi_io( 'omega_sor', omega_sor ) CALL wrd_mpi_io( 'origin_date_time', origin_date_time ) CALL wrd_mpi_io( 'output_for_t0', output_for_t0 ) CALL wrd_mpi_io( 'particle_advection', particle_advection ) CALL wrd_mpi_io( 'passive_scalar', passive_scalar ) CALL wrd_mpi_io( 'prandtl_number', prandtl_number ) CALL wrd_mpi_io( 'psolver', psolver ) CALL wrd_mpi_io( 'pt_damping_factor', pt_damping_factor ) CALL wrd_mpi_io( 'pt_damping_width', pt_damping_width ) CALL wrd_mpi_io_global_array( 'pt_init', pt_init ) CALL wrd_mpi_io( 'pt_reference', pt_reference ) CALL wrd_mpi_io( 'pt_surface', pt_surface ) CALL wrd_mpi_io( 'pt_surface_initial_change', pt_surface_initial_change ) CALL wrd_mpi_io_global_array( 'pt_vertical_gradient', pt_vertical_gradient ) CALL wrd_mpi_io_global_array( 'pt_vertical_gradient_level', pt_vertical_gradient_level ) CALL wrd_mpi_io_global_array( 'pt_vertical_gradient_level_ind', pt_vertical_gradient_level_ind ) CALL wrd_mpi_io_global_array( 'q_init', q_init ) CALL wrd_mpi_io( 'q_surface', q_surface ) CALL wrd_mpi_io( 'q_surface_initial_change', q_surface_initial_change ) CALL wrd_mpi_io_global_array( 'q_vertical_gradient', q_vertical_gradient ) CALL wrd_mpi_io_global_array( 'q_vertical_gradient_level', q_vertical_gradient_level ) CALL wrd_mpi_io_global_array( 'q_vertical_gradient_level_ind', q_vertical_gradient_level_ind ) CALL wrd_mpi_io( 'random_generator', random_generator ) CALL wrd_mpi_io( 'random_heatflux', random_heatflux ) CALL wrd_mpi_io( 'rans_mode', rans_mode ) CALL wrd_mpi_io( 'rayleigh_damping_factor', rayleigh_damping_factor ) CALL wrd_mpi_io( 'rayleigh_damping_height', rayleigh_damping_height ) CALL wrd_mpi_io( 'recycling_width', recycling_width ) CALL wrd_mpi_io_global_array( 'ref_state', ref_state ) CALL wrd_mpi_io( 'reference_state', reference_state ) CALL wrd_mpi_io( 'residual_limit', residual_limit ) CALL wrd_mpi_io( 'roughness_length', roughness_length ) CALL wrd_mpi_io( 'run_coupled', run_coupled ) CALL wrd_mpi_io( 'runnr', runnr ) CALL wrd_mpi_io_global_array( 's_init', s_init ) CALL wrd_mpi_io( 's_surface', s_surface ) CALL wrd_mpi_io( 's_surface_initial_change', s_surface_initial_change ) CALL wrd_mpi_io_global_array( 's_vertical_gradient', s_vertical_gradient ) CALL wrd_mpi_io_global_array( 's_vertical_gradient_level', s_vertical_gradient_level ) CALL wrd_mpi_io_global_array( 's_vertical_gradient_level_ind', s_vertical_gradient_level_ind ) CALL wrd_mpi_io( 'scalar_advec', scalar_advec ) CALL wrd_mpi_io( 'simulated_time', simulated_time ) IF ( ALLOCATED( spectrum_x ) ) THEN CALL wrd_mpi_io( 'spectrum_x', spectrum_x ) CALL wrd_mpi_io( 'spectrum_y', spectrum_y ) ENDIF CALL wrd_mpi_io( 'spinup_time ', spinup_time ) CALL wrd_mpi_io_global_array( 'subs_vertical_gradient', subs_vertical_gradient ) CALL wrd_mpi_io_global_array( 'subs_vertical_gradient_level', subs_vertical_gradient_level ) CALL wrd_mpi_io_global_array( 'subs_vertical_gradient_level_i', subs_vertical_gradient_level_i ) CALL wrd_mpi_io( 'surface_heatflux', surface_heatflux ) CALL wrd_mpi_io( 'surface_output', surface_output ) CALL wrd_mpi_io( 'surface_pressure', surface_pressure ) CALL wrd_mpi_io( 'surface_scalarflux', surface_scalarflux ) CALL wrd_mpi_io( 'surface_waterflux', surface_waterflux ) CALL wrd_mpi_io( 'syn_turb_gen', syn_turb_gen ) CALL wrd_mpi_io( 'time_coupling', time_coupling ) CALL wrd_mpi_io( 'time_disturb', time_disturb ) CALL wrd_mpi_io( 'time_do2d_xy', time_do2d_xy ) CALL wrd_mpi_io( 'time_do2d_xz', time_do2d_xz ) CALL wrd_mpi_io( 'time_do2d_yz', time_do2d_yz ) CALL wrd_mpi_io( 'time_do3d', time_do3d ) CALL wrd_mpi_io( 'time_do_av', time_do_av ) CALL wrd_mpi_io( 'time_do_sla', time_do_sla ) CALL wrd_mpi_io_global_array( 'time_domask', time_domask ) CALL wrd_mpi_io( 'time_dopr', time_dopr ) CALL wrd_mpi_io( 'time_dopr_av', time_dopr_av ) CALL wrd_mpi_io( 'time_dopr_listing', time_dopr_listing ) CALL wrd_mpi_io( 'time_dopts', time_dopts ) CALL wrd_mpi_io( 'time_dosp', time_dosp ) CALL wrd_mpi_io( 'time_dots', time_dots ) CALL wrd_mpi_io( 'time_radiation', time_radiation ) CALL wrd_mpi_io( 'time_restart', time_restart ) CALL wrd_mpi_io( 'time_run_control', time_run_control ) CALL wrd_mpi_io( 'time_since_reference_point', time_since_reference_point ) CALL wrd_mpi_io( 'time_virtual_measurement', time_virtual_measurement ) CALL wrd_mpi_io( 'timestep_scheme', timestep_scheme ) CALL wrd_mpi_io( 'top_heatflux', top_heatflux ) CALL wrd_mpi_io( 'top_momentumflux_u', top_momentumflux_u ) CALL wrd_mpi_io( 'top_momentumflux_v', top_momentumflux_v ) CALL wrd_mpi_io( 'top_scalarflux', top_scalarflux ) CALL wrd_mpi_io( 'topography', topography ) CALL wrd_mpi_io( 'topography_grid_convention', topography_grid_convention ) CALL wrd_mpi_io_global_array( 'tsc', tsc ) CALL wrd_mpi_io( 'tunnel_height', tunnel_height ) CALL wrd_mpi_io( 'tunnel_length', tunnel_length ) CALL wrd_mpi_io( 'tunnel_wall_depth', tunnel_wall_depth ) CALL wrd_mpi_io( 'tunnel_width_x', tunnel_width_x ) CALL wrd_mpi_io( 'tunnel_width_y', tunnel_width_y ) CALL wrd_mpi_io( 'turbulence_closure', turbulence_closure ) CALL wrd_mpi_io( 'turbulent_inflow', turbulent_inflow ) CALL wrd_mpi_io( 'u_bulk', u_bulk ) CALL wrd_mpi_io_global_array( 'u_init', u_init ) CALL wrd_mpi_io( 'u_max', u_max ) CALL wrd_mpi_io_global_array( 'u_max_ijk', u_max_ijk ) CALL wrd_mpi_io_global_array( 'ug', ug ) CALL wrd_mpi_io( 'ug_surface', ug_surface ) CALL wrd_mpi_io_global_array( 'ug_vertical_gradient', ug_vertical_gradient ) CALL wrd_mpi_io_global_array( 'ug_vertical_gradient_level', ug_vertical_gradient_level ) CALL wrd_mpi_io_global_array( 'ug_vertical_gradient_level_ind', ug_vertical_gradient_level_ind ) CALL wrd_mpi_io( 'use_surface_fluxes', use_surface_fluxes ) CALL wrd_mpi_io( 'use_top_fluxes', use_top_fluxes ) CALL wrd_mpi_io( 'use_ug_for_galilei_tr', use_ug_for_galilei_tr ) CALL wrd_mpi_io( 'use_upstream_for_tke', use_upstream_for_tke ) CALL wrd_mpi_io( 'user_module_enabled', user_module_enabled ) CALL wrd_mpi_io( 'v_bulk', v_bulk ) CALL wrd_mpi_io_global_array( 'v_init', v_init ) CALL wrd_mpi_io( 'v_max', v_max ) CALL wrd_mpi_io_global_array( 'v_max_ijk', v_max_ijk ) CALL wrd_mpi_io_global_array( 'vg', vg ) CALL wrd_mpi_io( 'vg_surface', vg_surface ) CALL wrd_mpi_io_global_array( 'vg_vertical_gradient', vg_vertical_gradient ) CALL wrd_mpi_io_global_array( 'vg_vertical_gradient_level', vg_vertical_gradient_level ) CALL wrd_mpi_io_global_array( 'vg_vertical_gradient_level_ind', vg_vertical_gradient_level_ind ) CALL wrd_mpi_io( 'virtual_flight', virtual_flight ) CALL wrd_mpi_io_global_array( 'volume_flow_area', volume_flow_area ) CALL wrd_mpi_io_global_array( 'volume_flow_initial', volume_flow_initial ) CALL wrd_mpi_io( 'w_max', w_max ) CALL wrd_mpi_io_global_array( 'w_max_ijk', w_max_ijk ) CALL wrd_mpi_io( 'wall_adjustment', wall_adjustment ) CALL wrd_mpi_io_global_array( 'wall_heatflux', wall_heatflux ) CALL wrd_mpi_io_global_array( 'wall_humidityflux', wall_humidityflux ) CALL wrd_mpi_io_global_array( 'wall_scalarflux', wall_scalarflux ) CALL wrd_mpi_io( 'y_shift', y_shift ) CALL wrd_mpi_io( 'z0h_factor', z0h_factor ) CALL wrd_mpi_io( 'zeta_max', zeta_max ) CALL wrd_mpi_io( 'zeta_min', zeta_min ) CALL wrd_mpi_io_global_array( 'z_i', z_i ) ENDIF ! !-- Write restart data of the other modules CALL module_interface_wrd_global END SUBROUTINE wrd_global !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> Processor specific data of variables and arrays is written out for restarts (binary format). !> This information is written to the file opened by each PE. !--------------------------------------------------------------------------------------------------! SUBROUTINE wrd_local CHARACTER(LEN=10) :: binary_version_local !< CHARACTER(LEN=20) :: tmp_name !< temporary variable INTEGER :: i !< loop index ! !-- Write arrays. binary_version_local = '5.0' IF ( TRIM( restart_data_format_output ) == 'fortran_binary' ) THEN ! !-- Output in Fortran binary format CALL wrd_write_string( 'binary_version_local' ) WRITE ( 14 ) binary_version_local WRITE ( 14 ) numprocs, myid, nxl, nxr, nys, nyn, nzb, nzt ! !-- Attention: After changes to the following output commands the version number of the variable !-- ---------- binary_version_local must be changed! !-- Also, the list of arrays to be read in rrd_local must be adjusted accordingly. CALL wrd_write_string( 'e' ) WRITE ( 14 ) e IF ( ALLOCATED( e_av ) ) THEN CALL wrd_write_string( 'e_av' ) WRITE ( 14 ) e_av ENDIF CALL wrd_write_string( 'kh' ) WRITE ( 14 ) kh IF ( ALLOCATED( kh_av ) ) THEN CALL wrd_write_string( 'kh_av' ) WRITE ( 14 ) kh_av ENDIF CALL wrd_write_string( 'km' ) WRITE ( 14 ) km IF ( ALLOCATED( km_av ) ) THEN CALL wrd_write_string( 'km_av' ) WRITE ( 14 ) km_av ENDIF IF ( ALLOCATED( lpt_av ) ) THEN CALL wrd_write_string( 'lpt_av' ) WRITE ( 14 ) lpt_av ENDIF IF ( ALLOCATED( lwp_av ) ) THEN CALL wrd_write_string( 'lwp_av' ) WRITE ( 14 ) lwp_av ENDIF CALL wrd_write_string( 'p' ) WRITE ( 14 ) p IF ( ALLOCATED( p_av ) ) THEN CALL wrd_write_string( 'p_av' ) WRITE ( 14 ) p_av ENDIF IF ( ALLOCATED( pc_av ) ) THEN CALL wrd_write_string( 'pc_av' ) WRITE ( 14 ) pc_av ENDIF IF ( ALLOCATED( pr_av ) ) THEN CALL wrd_write_string( 'pr_av' ) WRITE ( 14 ) pr_av ENDIF CALL wrd_write_string( 'pt' ) WRITE ( 14 ) pt IF ( ALLOCATED( pt_av ) ) THEN CALL wrd_write_string( 'pt_av' ) WRITE ( 14 ) pt_av ENDIF IF ( humidity ) THEN CALL wrd_write_string( 'q' ) WRITE ( 14 ) q IF ( ALLOCATED( q_av ) ) THEN CALL wrd_write_string( 'q_av' ) WRITE ( 14 ) q_av ENDIF IF ( cloud_droplets ) THEN CALL wrd_write_string( 'ql' ) WRITE ( 14 ) ql IF ( ALLOCATED( ql_av ) ) THEN CALL wrd_write_string( 'ql_av' ) WRITE ( 14 ) ql_av ENDIF ENDIF IF ( ALLOCATED( qsurf_av ) ) THEN CALL wrd_write_string( 'qsurf_av' ) WRITE ( 14 ) qsurf_av ENDIF IF ( ALLOCATED( qsws_av ) ) THEN CALL wrd_write_string( 'qsws_av' ) WRITE ( 14 ) qsws_av ENDIF ENDIF IF ( passive_scalar ) THEN CALL wrd_write_string( 's' ) WRITE ( 14 ) s IF ( ALLOCATED( s_av ) ) THEN CALL wrd_write_string( 's_av' ) WRITE ( 14 ) s_av ENDIF IF ( ALLOCATED( ssurf_av ) ) THEN CALL wrd_write_string( 'ssurf_av' ) WRITE ( 14 ) ssurf_av ENDIF IF ( ALLOCATED( ssws_av ) ) THEN CALL wrd_write_string( 'ssws_av' ) WRITE ( 14 ) ssws_av ENDIF ENDIF IF ( ALLOCATED( ql_c_av ) ) THEN CALL wrd_write_string( 'ql_c_av' ) WRITE ( 14 ) ql_c_av ENDIF IF ( ALLOCATED( ql_v_av ) ) THEN CALL wrd_write_string( 'ql_v_av' ) WRITE ( 14 ) ql_v_av ENDIF IF ( ALLOCATED( ql_vp_av ) ) THEN CALL wrd_write_string( 'ql_vp_av' ) WRITE ( 14 ) ql_vp_av ENDIF IF ( ALLOCATED( qv_av ) ) THEN CALL wrd_write_string( 'qv_av' ) WRITE ( 14 ) qv_av ENDIF CALL wrd_write_string( 'random_iv' ) WRITE ( 14 ) random_iv WRITE ( 14 ) random_iy IF ( ALLOCATED( seq_random_array ) ) THEN CALL wrd_write_string( 'seq_random_array' ) WRITE ( 14 ) id_random_array WRITE ( 14 ) seq_random_array ENDIF IF ( ALLOCATED( s_av ) ) THEN CALL wrd_write_string( 's_av' ) WRITE ( 14 ) s_av ENDIF IF ( ALLOCATED( shf_av ) ) THEN CALL wrd_write_string( 'shf_av' ) WRITE ( 14 ) shf_av ENDIF IF ( ALLOCATED( ts_av ) ) THEN CALL wrd_write_string( 'ts_av' ) WRITE ( 14 ) ts_av ENDIF CALL wrd_write_string( 'u' ) WRITE ( 14 ) u IF ( ALLOCATED( u_av ) ) THEN CALL wrd_write_string( 'u_av' ) WRITE ( 14 ) u_av ENDIF IF ( ALLOCATED( u_m_l ) ) THEN CALL wrd_write_string( 'u_m_l' ) WRITE ( 14 ) u_m_l ENDIF IF ( ALLOCATED( u_m_n ) ) THEN CALL wrd_write_string( 'u_m_n' ) WRITE ( 14 ) u_m_n ENDIF IF ( ALLOCATED( u_m_r ) ) THEN CALL wrd_write_string( 'u_m_r' ) WRITE ( 14 ) u_m_r ENDIF IF ( ALLOCATED( u_m_s ) ) THEN CALL wrd_write_string( 'u_m_s' ) WRITE ( 14 ) u_m_s ENDIF IF ( ALLOCATED( us_av ) ) THEN CALL wrd_write_string( 'us_av' ) WRITE ( 14 ) us_av ENDIF CALL wrd_write_string( 'v' ) WRITE ( 14 ) v IF ( ALLOCATED( v_av ) ) THEN CALL wrd_write_string( 'v_av' ) WRITE ( 14 ) v_av ENDIF IF ( ALLOCATED( v_m_l ) ) THEN CALL wrd_write_string( 'v_m_l' ) WRITE ( 14 ) v_m_l ENDIF IF ( ALLOCATED( v_m_n ) ) THEN CALL wrd_write_string( 'v_m_n' ) WRITE ( 14 ) v_m_n ENDIF IF ( ALLOCATED( v_m_r ) ) THEN CALL wrd_write_string( 'v_m_r' ) WRITE ( 14 ) v_m_r ENDIF IF ( ALLOCATED( v_m_s ) ) THEN CALL wrd_write_string( 'v_m_s' ) WRITE ( 14 ) v_m_s ENDIF IF ( humidity ) THEN CALL wrd_write_string( 'vpt' ) WRITE ( 14 ) vpt IF ( ALLOCATED( vpt_av ) ) THEN CALL wrd_write_string( 'vpt_av' ) WRITE ( 14 ) vpt_av ENDIF ENDIF CALL wrd_write_string( 'w' ) WRITE ( 14 ) w IF ( ALLOCATED( w_av ) ) THEN CALL wrd_write_string( 'w_av' ) WRITE ( 14 ) w_av ENDIF IF ( ALLOCATED( w_m_l ) ) THEN CALL wrd_write_string( 'w_m_l' ) WRITE ( 14 ) w_m_l ENDIF IF ( ALLOCATED( w_m_n ) ) THEN CALL wrd_write_string( 'w_m_n' ) WRITE ( 14 ) w_m_n ENDIF IF ( ALLOCATED( w_m_r ) ) THEN CALL wrd_write_string( 'w_m_r' ) WRITE ( 14 ) w_m_r ENDIF IF ( ALLOCATED( w_m_s ) ) THEN CALL wrd_write_string( 'w_m_s' ) WRITE ( 14 ) w_m_s ENDIF IF ( ALLOCATED( z0_av ) ) THEN CALL wrd_write_string( 'z0_av' ) WRITE ( 14 ) z0_av ENDIF IF ( ALLOCATED( z0h_av ) ) THEN CALL wrd_write_string( 'z0h_av' ) WRITE ( 14 ) z0h_av ENDIF IF ( ALLOCATED( z0q_av ) ) THEN CALL wrd_write_string( 'z0q_av' ) WRITE ( 14 ) z0q_av ENDIF IF ( land_surface .OR. urban_surface ) THEN IF ( ALLOCATED( ghf_av ) ) THEN CALL wrd_write_string( 'ghf_av' ) WRITE ( 14 ) ghf_av ENDIF IF ( ALLOCATED( r_a_av ) ) THEN CALL wrd_write_string( 'r_a_av' ) WRITE ( 14 ) r_a_av ENDIF ENDIF IF ( ALLOCATED( tsurf_av ) ) THEN CALL wrd_write_string( 'tsurf_av' ) WRITE ( 14 ) tsurf_av ENDIF ELSEIF ( restart_data_format_output(1:3) == 'mpi' ) THEN ! !-- Write local restart data using MPI-IO !-- Attention: After changes to the following output commands the version number !-- --------- of the variable binary_version must be changed! !-- Also, the list of arrays to be read in rrd_local must be adjusted accordingly. CALL wrd_mpi_io( 'e', e) IF ( ALLOCATED( e_av ) ) CALL wrd_mpi_io( 'e_av', e_av) CALL wrd_mpi_io( 'kh', kh ) IF ( ALLOCATED( kh_av ) ) CALL wrd_mpi_io( 'kh_av', kh_av ) CALL wrd_mpi_io( 'km' , km ) IF ( ALLOCATED( km_av ) ) CALL wrd_mpi_io( 'km_av', km_av ) IF ( ALLOCATED( lpt_av ) ) CALL wrd_mpi_io( 'lpt_av', lpt_av ) IF ( ALLOCATED( lwp_av ) ) CALL wrd_mpi_io( 'lwp_av', lwp_av ) CALL wrd_mpi_io( 'p', p ) IF ( ALLOCATED( p_av ) ) CALL wrd_mpi_io( 'p_av', p_av ) IF ( ALLOCATED( pc_av ) ) CALL wrd_mpi_io( 'pc_av', pc_av ) IF ( ALLOCATED( pr_av ) ) CALL wrd_mpi_io( 'pr_av', pr_av ) CALL wrd_mpi_io( 'pt', pt ) IF ( ALLOCATED( pt_av ) ) CALL wrd_mpi_io( 'pt_av', pt_av ) IF ( humidity ) THEN CALL wrd_mpi_io( 'q', q ) IF ( ALLOCATED( q_av ) ) CALL wrd_mpi_io( 'q_av', q_av ) IF ( cloud_droplets ) THEN CALL wrd_mpi_io( 'ql', ql ) IF ( ALLOCATED( ql_av ) ) CALL wrd_mpi_io( 'ql_av', ql_av ) ENDIF IF ( ALLOCATED( qsurf_av ) ) CALL wrd_mpi_io( 'qsurf_av', qsurf_av ) IF ( ALLOCATED( qsws_av ) ) CALL wrd_mpi_io( 'qsws_av', qsws_av ) ENDIF IF ( passive_scalar ) THEN CALL wrd_mpi_io( 's', s ) IF ( ALLOCATED( s_av ) ) CALL wrd_mpi_io( 's_av', s_av ) IF ( ALLOCATED( ssurf_av ) ) CALL wrd_mpi_io( 'ssurf_av', ssurf_av ) IF ( ALLOCATED( ssws_av ) ) CALL wrd_mpi_io( 'ssws_av', ssws_av ) ENDIF IF ( ALLOCATED( ql_c_av ) ) CALL wrd_mpi_io( 'ql_c_av', ql_c_av ) IF ( ALLOCATED( ql_v_av ) ) CALL wrd_mpi_io( 'ql_v_av', ql_v_av ) IF ( ALLOCATED( ql_vp_av ) ) CALL wrd_mpi_io( 'ql_vp_av', ql_vp_av ) IF ( ALLOCATED( qv_av ) ) CALL wrd_mpi_io( 'qv_av', qv_av ) ! !-- Only PE0 writes random_iv and random_iy to restart file. !-- ATTENTION: If one value for every PE is required, the general approach of PE indendent !-- restart will be lost. That means that in general the parallel random number generator !-- in random_generatot_parallel_mod should be used! CALL wrd_mpi_io_global_array( 'random_iv', random_iv ) CALL wrd_mpi_io( 'random_iy', random_iy ) IF ( ALLOCATED( seq_random_array ) ) THEN CALL wrd_mpi_io( 'id_random_array', id_random_array ) DO i = 1, SIZE( seq_random_array, 1 ) WRITE( tmp_name, '(A,I2.2)' ) 'seq_random_array', i CALL wrd_mpi_io( TRIM( tmp_name ), seq_random_array(i,:,:) ) ENDDO ENDIF IF ( ALLOCATED( s_av ) ) CALL wrd_mpi_io( 's_av', s_av ) IF ( ALLOCATED( shf_av ) ) CALL wrd_mpi_io( 'shf_av', shf_av ) IF ( ALLOCATED( ts_av ) ) CALL wrd_mpi_io( 'ts_av', ts_av ) CALL wrd_mpi_io( 'u', u) IF ( ALLOCATED( u_av ) ) CALL wrd_mpi_io( 'u_av', u_av ) IF ( ALLOCATED( u_m_l ) ) CALL wrd_mpi_io( 'u_m_l', u_m_l ) IF ( ALLOCATED( u_m_n ) ) CALL wrd_mpi_io( 'u_m_n', u_m_n ) IF ( ALLOCATED( u_m_r ) ) CALL wrd_mpi_io( 'u_m_r', u_m_r ) IF ( ALLOCATED( u_m_s ) ) CALL wrd_mpi_io( 'u_m_s', u_m_s ) IF ( ALLOCATED( us_av ) ) CALL wrd_mpi_io( 'us_av', us_av ) CALL wrd_mpi_io( 'v', v ) IF ( ALLOCATED( v_av ) ) CALL wrd_mpi_io( 'v_av', v_av ) IF ( ALLOCATED( v_m_l ) ) CALL wrd_mpi_io( 'v_m_l', v_m_l ) IF ( ALLOCATED( v_m_n ) ) CALL wrd_mpi_io( 'v_m_n', v_m_n ) IF ( ALLOCATED( v_m_r ) ) CALL wrd_mpi_io( 'v_m_r', v_m_r ) IF ( ALLOCATED( v_m_s ) ) CALL wrd_mpi_io( 'v_m_s', v_m_s ) IF ( humidity ) THEN CALL wrd_mpi_io( 'vpt', vpt ) IF ( ALLOCATED( vpt_av ) ) CALL wrd_mpi_io( 'vpt_av', vpt_av ) ENDIF CALL wrd_mpi_io( 'w', w) IF ( ALLOCATED( w_av ) ) CALL wrd_mpi_io( 'w_av', w_av ) IF ( ALLOCATED( w_m_l ) ) CALL wrd_mpi_io( 'w_m_l', w_m_l ) IF ( ALLOCATED( w_m_n ) ) CALL wrd_mpi_io( 'w_m_n', w_m_n ) IF ( ALLOCATED( w_m_r ) ) CALL wrd_mpi_io( 'w_m_r', w_m_r ) IF ( ALLOCATED( w_m_s ) ) CALL wrd_mpi_io( 'w_m_s', w_m_s ) IF ( ALLOCATED( z0_av ) ) CALL wrd_mpi_io( 'z0_av', z0_av ) IF ( ALLOCATED( z0h_av ) ) CALL wrd_mpi_io( 'z0h_av', z0h_av ) IF ( ALLOCATED( z0q_av ) ) CALL wrd_mpi_io( 'z0q_av', z0q_av ) IF ( land_surface .OR. urban_surface ) THEN IF ( ALLOCATED( ghf_av ) ) CALL wrd_mpi_io( 'ghf_av', ghf_av ) IF ( ALLOCATED( r_a_av ) ) CALL wrd_mpi_io( 'r_a_av', r_a_av ) ENDIF IF ( ALLOCATED( tsurf_av ) ) CALL wrd_mpi_io( 'tsurf_av', tsurf_av ) ENDIF CALL surface_wrd_local ! !-- Write restart data of other modules CALL module_interface_wrd_local ! !-- Write end label IF ( restart_data_format_output == 'fortran_binary' ) THEN CALL wrd_write_string( '*** end ***' ) ENDIF END SUBROUTINE wrd_local END MODULE write_restart_data_mod