!> @file wind_turbine_model_mod.f90 !--------------------------------------------------------------------------------------------------! ! This file is part of the PALM model system. ! ! PALM is free software: you can redistribute it and/or modify it under the terms of the GNU General ! Public License as published by the Free Software Foundation, either version 3 of the License, or ! (at your option) any later version. ! ! PALM is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the ! implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General ! Public License for more details. ! ! You should have received a copy of the GNU General Public License along with PALM. If not, see ! . ! ! Copyright 2009-2020 Carl von Ossietzky Universitaet Oldenburg ! Copyright 1997-2020 Leibniz Universitaet Hannover !--------------------------------------------------------------------------------------------------! ! ! ! Current revisions: ! ----------------- ! ! ! Former revisions: ! ----------------- ! $Id: wind_turbine_model_mod.f90 4537 2020-05-18 06:31:50Z pavelkrc $ ! reset n_turbines_max to 1E4 (10 000), because it was set to 1 000 in r4497 by mistake ! ! 4535 2020-05-15 12:07:23Z raasch ! bugfix for restart data format query ! ! 4528 2020-05-11 14:14:09Z oliver.maas ! added namelist parameter smearing_kernel_size ! ! 4497 2020-04-15 10:20:51Z raasch ! file re-formatted to follow the PALM coding standard ! ! ! 4495 2020-04-13 20:11:20Z raasch ! restart data handling with MPI-IO added ! ! 4481 2020-03-31 18:55:54Z maronga ! ASCII output cleanup ! ! 4465 2020-03-20 11:35:48Z maronga ! Removed old ASCII outputm, some syntax layout adjustments, added output for rotor and tower ! diameters. Added warning message in case of NetCDF 3 (no WTM output file will be produced). ! ! 4460 2020-03-12 16:47:30Z oliver.maas ! allow for simulating up to 10 000 wind turbines ! ! 4459 2020-03-12 09:35:23Z oliver.maas ! avoid division by zero in tip loss correction factor calculation ! ! 4457 2020-03-11 14:20:43Z raasch ! use statement for exchange horiz added ! ! 4447 2020-03-06 11:05:30Z oliver.maas ! renamed wind_turbine_parameters namelist variables ! ! 4438 2020-03-03 20:49:28Z suehring ! Bugfix: shifted netcdf preprocessor directive to correct position ! ! 4436 2020-03-03 12:47:02Z oliver.maas ! added optional netcdf data input for wtm array input parameters ! ! 4426 2020-02-27 10:02:19Z oliver.maas ! define time as unlimited dimension so that no maximum number of time steps has to be given for ! wtm_data_output ! ! 4423 2020-02-25 07:17:11Z maronga ! Switched to serial output as data is aggerated before anyway. ! ! 4420 2020-02-24 14:13:56Z maronga ! Added output control for wind turbine model ! ! 4412 2020-02-19 14:53:13Z maronga ! Bugfix: corrected character length in dimension_names ! ! 4411 2020-02-18 14:28:02Z maronga ! Added output in NetCDF format using DOM (only netcdf4-parallel is supported). ! Old ASCII output is still available at the moment. ! ! 4360 2020-01-07 11:25:50Z suehring ! Introduction of wall_flags_total_0, which currently sets bits based on static topography ! information used in wall_flags_static_0 ! ! 4343 2019-12-17 12:26:12Z oliver.maas ! replaced <= by < in line 1464 to ensure that ialpha will not be greater than dlen ! ! 4329 2019-12-10 15:46:36Z motisi ! Renamed wall_flags_0 to wall_flags_static_0 ! ! 4326 2019-12-06 14:16:14Z oliver.maas ! changed format of turbine control output to allow for higher torque and power values ! ! 4182 2019-08-22 15:20:23Z scharf ! Corrected "Former revisions" section ! ! 4144 2019-08-06 09:11:47Z raasch ! relational operators .EQ., .NE., etc. replaced by ==, /=, etc. ! ! 4056 2019-06-27 13:53:16Z Giersch ! CASE DEFAULT action in wtm_actions needs to be CONTINUE. Otherwise an abort will happen for ! location values that are not implemented as CASE statements but are already realized in the code ! (e.g. pt-tendency) ! ! 3885 2019-04-11 11:29:34Z kanani ! Changes related to global restructuring of location messages and introduction of additional debug ! messages ! ! 3875 2019-04-08 17:35:12Z knoop ! Addaped wtm_tendency to fit the module actions interface ! ! 3832 2019-03-28 13:16:58Z raasch ! instrumented with openmp directives ! ! 3725 2019-02-07 10:11:02Z raasch ! unused variables removed ! ! 3685 2019-01-21 01:02:11Z knoop ! Some interface calls moved to module_interface + cleanup ! ! 3655 2019-01-07 16:51:22Z knoop ! Replace degree symbol by 'degrees' ! ! 1914 2016-05-26 14:44:07Z witha ! Initial revision ! ! ! Description: ! ------------ !> This module calculates the effect of wind turbines on the flow fields. The initial version !> contains only the advanced actuator disk with rotation method (ADM-R). !> The wind turbines include the tower effect, can be yawed and tilted. !> The wind turbine model includes controllers for rotational speed, pitch and yaw. !> Currently some specifications of the NREL 5 MW reference turbine are hardcoded whereas most input !> data comes from separate files (currently external, planned to be included as namelist which will !> be read in automatically). !> !> @todo Replace dz(1) appropriatly to account for grid stretching !> @todo Revise code according to PALM Coding Standard !> @todo Implement ADM and ALM turbine models !> @todo Generate header information !> @todo Implement further parameter checks and error messages !> @todo Revise and add code documentation !> @todo Output turbine parameters as timeseries !> @todo Include additional output variables !> @todo Revise smearing the forces for turbines in yaw !> @todo Revise nacelle and tower parameterization !> @todo Allow different turbine types in one simulation ! !--------------------------------------------------------------------------------------------------! MODULE wind_turbine_model_mod USE arrays_3d, & ONLY: tend, u, v, w, zu, zw USE basic_constants_and_equations_mod, & ONLY: pi USE control_parameters, & ONLY: coupling_char, & debug_output, & dt_3d, dz, end_time, initializing_actions, message_string, & origin_date_time, restart_data_format_output, time_since_reference_point, & wind_turbine USE cpulog, & ONLY: cpu_log, log_point_s USE data_output_module USE grid_variables, & ONLY: ddx, dx, ddy, dy USE indices, & ONLY: nbgp, nx, nxl, nxlg, nxr, nxrg, ny, nyn, nyng, nys, nysg, nz, & nzb, nzt, wall_flags_total_0 USE kinds USE netcdf_data_input_mod, & ONLY: check_existence, & close_input_file, & get_variable, & input_pids_wtm, & inquire_num_variables, & inquire_variable_names, & input_file_wtm, & num_var_pids, & open_read_file, & pids_id, & vars_pids USE pegrid USE restart_data_mpi_io_mod, & ONLY: rrd_mpi_io_global_array, wrd_mpi_io_global_array IMPLICIT NONE PRIVATE CHARACTER(LEN=100) :: variable_name !< name of output variable CHARACTER(LEN=30) :: nc_filename !< INTEGER(iwp), PARAMETER :: n_turbines_max = 1E4 !< maximum number of turbines (for array allocation) ! !-- Variables specified in the namelist wind_turbine_par INTEGER(iwp) :: n_airfoils = 8 !< number of airfoils of the used turbine model (for ADM-R and ALM) INTEGER(iwp) :: n_turbines = 1 !< number of turbines LOGICAL :: pitch_control = .FALSE. !< switch for use of pitch controller LOGICAL :: speed_control = .FALSE. !< switch for use of speed controller LOGICAL :: tip_loss_correction = .FALSE. !< switch for use of tip loss correct. LOGICAL :: yaw_control = .FALSE. !< switch for use of yaw controller LOGICAL :: initial_write_coordinates = .FALSE. !< REAL(wp), DIMENSION(:), POINTER :: output_values_1d_pointer !< pointer for 2d output array REAL(wp), POINTER :: output_values_0d_pointer !< pointer for 2d output array REAL(wp), DIMENSION(:), ALLOCATABLE, TARGET :: output_values_1d_target !< pointer for 2d output array REAL(wp), TARGET :: output_values_0d_target !< pointer for 2d output array REAL(wp) :: dt_data_output_wtm = 0.0_wp !< data output interval REAL(wp) :: time_wtm = 0.0_wp !< time since last data output REAL(wp) :: segment_length_tangential = 1.0_wp !< length of the segments, the rotor area is divided into !< (in tangential direction, as factor of MIN(dx,dy,dz)) REAL(wp) :: segment_width_radial = 0.5_wp !< width of the segments, the rotor area is divided into !< (in radial direction, as factor of MIN(dx,dy,dz)) REAL(wp) :: smearing_kernel_size = 2.0_wp !< size of the smearing kernel as multiples of dx REAL(wp) :: time_turbine_on = 0.0_wp !< time at which turbines are started REAL(wp) :: tilt_angle = 0.0_wp !< vertical tilt_angle of the rotor [degree] ( positive = backwards ) !< ( clockwise, 0 = facing west ) REAL(wp), DIMENSION(1:n_turbines_max) :: hub_x = 9999999.9_wp !< position of hub in x-direction REAL(wp), DIMENSION(1:n_turbines_max) :: hub_y = 9999999.9_wp !< position of hub in y-direction REAL(wp), DIMENSION(1:n_turbines_max) :: hub_z = 9999999.9_wp !< position of hub in z-direction REAL(wp), DIMENSION(1:n_turbines_max) :: nacelle_radius = 0.0_wp !< nacelle diameter [m] ! REAL(wp), DIMENSION(1:n_turbines_max) :: nacelle_cd = 0.85_wp !< drag coefficient for nacelle REAL(wp), DIMENSION(1:n_turbines_max) :: tower_cd = 1.2_wp !< drag coefficient for tower REAL(wp), DIMENSION(1:n_turbines_max) :: pitch_angle = 0.0_wp !< constant pitch angle REAL(wp), DIMENSION(1:n_turbines_max) :: rotor_radius = 63.0_wp !< rotor radius [m] REAL(wp), DIMENSION(1:n_turbines_max), TARGET :: rotor_speed = 0.9_wp !< inital or constant rotor speed [rad/s] REAL(wp), DIMENSION(1:n_turbines_max) :: tower_diameter = 0.0_wp !< tower diameter [m] REAL(wp), DIMENSION(1:n_turbines_max) :: yaw_angle = 0.0_wp !< yaw angle [degree] ! !-- Variables specified in the namelist for speed controller !-- Default values are from the NREL 5MW research turbine (Jonkman, 2008) REAL(wp) :: air_density = 1.225_wp !< Air density to convert to W [kg/m3] REAL(wp) :: gear_efficiency = 1.0_wp !< Loss between rotor and generator REAL(wp) :: gear_ratio = 97.0_wp !< Gear ratio from rotor to generator REAL(wp) :: generator_power_rated = 5296610.0_wp !< rated turbine power [W] REAL(wp) :: generator_inertia = 534.116_wp !< Inertia of the generator [kg*m2] REAL(wp) :: generator_efficiency = 0.944_wp !< Electric efficiency of the generator REAL(wp) :: generator_speed_rated = 121.6805_wp !< Rated generator speed [rad/s] REAL(wp) :: generator_torque_max = 47402.91_wp !< Maximum of the generator torque [Nm] REAL(wp) :: generator_torque_rate_max = 15000.0_wp !< Max generator torque increase [Nm/s] REAL(wp) :: pitch_rate = 8.0_wp !< Max pitch rate [degree/s] REAL(wp) :: region_2_slope = 2.332287_wp !< Slope constant for region 2 REAL(wp) :: region_2_min = 91.21091_wp !< Lower generator speed boundary of region 2 [rad/s] REAL(wp) :: region_15_min = 70.16224_wp !< Lower generator speed boundary of region 1.5 [rad/s] REAL(wp) :: rotor_inertia = 34784179.0_wp !< Inertia of the rotor [kg*m2] ! !-- Variables specified in the namelist for yaw control: REAL(wp) :: yaw_misalignment_max = 0.08726_wp !< maximum tolerated yaw missalignment [rad] REAL(wp) :: yaw_misalignment_min = 0.008726_wp !< minimum yaw missalignment for which the actuator stops [rad] REAL(wp) :: yaw_speed = 0.005236_wp !< speed of the yaw actuator [rad/s] ! !-- Variables for initialization of the turbine model: INTEGER(iwp) :: inot !< turbine loop index (turbine id) INTEGER(iwp) :: nsegs_max !< maximum number of segments (all turbines, required for allocation of arrays) INTEGER(iwp) :: nrings_max !< maximum number of rings (all turbines, required for allocation of arrays) INTEGER(iwp) :: ring !< ring loop index (ring number) INTEGER(iwp) :: upper_end !< INTEGER(iwp), DIMENSION(1) :: lct !< INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: i_hub !< index belonging to x-position of the turbine INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: i_smear !< index defining the area for the smearing of the forces (x-direction) INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: j_hub !< index belonging to y-position of the turbine INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: j_smear !< index defining the area for the smearing of the forces (y-direction) INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: k_hub !< index belonging to hub height INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: k_smear !< index defining the area for the smearing of the forces (z-direction) INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: nrings !< number of rings per turbine INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: nsegs_total !< total number of segments per turbine INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: nsegs !< number of segments per ring and turbine ! !- Parameters for the smearing from the rotor to the cartesian grid: REAL(wp) :: delta_t_factor !< REAL(wp) :: eps_factor !< REAL(wp) :: eps_min !< REAL(wp) :: eps_min2 !< REAL(wp) :: pol_a !< parameter for the polynomial smearing fct REAL(wp) :: pol_b !< parameter for the polynomial smearing fct ! !-- Variables for the calculation of lift and drag coefficients: REAL(wp), DIMENSION(:), ALLOCATABLE :: ard !< REAL(wp), DIMENSION(:), ALLOCATABLE :: crd !< REAL(wp), DIMENSION(:), ALLOCATABLE :: delta_r !< radial segment length REAL(wp), DIMENSION(:), ALLOCATABLE :: lrd !< REAL(wp) :: accu_cl_cd_tab = 0.1_wp !< Accuracy of the interpolation of the lift and drag coeff [deg] REAL(wp), DIMENSION(:,:), ALLOCATABLE :: turb_cd_tab !< table of the blade drag coefficient REAL(wp), DIMENSION(:,:), ALLOCATABLE :: turb_cl_tab !< table of the blade lift coefficient REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: nac_cd_surf !< 3d field of the tower drag coefficient REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: tow_cd_surf !< 3d field of the nacelle drag coefficient ! !-- Variables for the calculation of the forces: REAL(wp) :: cur_r !< REAL(wp) :: phi_rotor !< REAL(wp) :: pre_factor !< REAL(wp) :: torque_seg !< REAL(wp) :: u_int_l !< REAL(wp) :: u_int_u !< REAL(wp) :: u_rot !< REAL(wp) :: v_int_l !< REAL(wp) :: v_int_u !< REAL(wp) :: w_int_l !< REAL(wp) :: w_int_u !< !$OMP THREADPRIVATE (cur_r, phi_rotor, pre_factor, torque_seg, u_int_l, u_int_u, u_rot, & !$OMP& v_int_l, v_int_u, w_int_l, w_int_u) ! !- Tendencies from the nacelle and tower thrust: REAL(wp) :: tend_nac_x = 0.0_wp !< REAL(wp) :: tend_nac_y = 0.0_wp !< REAL(wp) :: tend_tow_x = 0.0_wp !< REAL(wp) :: tend_tow_y = 0.0_wp !< !$OMP THREADPRIVATE (tend_nac_x, tend_tow_x, tend_nac_y, tend_tow_y) REAL(wp), DIMENSION(:), ALLOCATABLE :: alpha_attack !< REAL(wp), DIMENSION(:), ALLOCATABLE :: chord !< REAL(wp), DIMENSION(:), ALLOCATABLE :: phi_rel !< REAL(wp), DIMENSION(:), ALLOCATABLE :: torque_total !< REAL(wp), DIMENSION(:), ALLOCATABLE :: thrust_rotor !< REAL(wp), DIMENSION(:), ALLOCATABLE :: turb_cd !< REAL(wp), DIMENSION(:), ALLOCATABLE :: turb_cl !< REAL(wp), DIMENSION(:), ALLOCATABLE :: vrel !< REAL(wp), DIMENSION(:), ALLOCATABLE :: vtheta !< REAL(wp), DIMENSION(:,:), ALLOCATABLE :: rbx, rby, rbz !< coordinates of the blade elements REAL(wp), DIMENSION(:,:), ALLOCATABLE :: rotx, roty, rotz !< normal vectors to the rotor coordinates ! !- Fields for the interpolation of velocities on the rotor grid: REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: u_int !< REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: u_int_1_l !< REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: v_int !< REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: v_int_1_l !< REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: w_int !< REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: w_int_1_l !< ! !- Rotor tendencies on the segments: REAL(wp), DIMENSION(:), ALLOCATABLE :: thrust_seg !< REAL(wp), DIMENSION(:), ALLOCATABLE :: torque_seg_y !< REAL(wp), DIMENSION(:), ALLOCATABLE :: torque_seg_z !< ! !- Rotor tendencies on the rings: REAL(wp), DIMENSION(:,:), ALLOCATABLE :: thrust_ring !< REAL(wp), DIMENSION(:,:), ALLOCATABLE :: torque_ring_y !< REAL(wp), DIMENSION(:,:), ALLOCATABLE :: torque_ring_z !< ! !- Rotor tendencies on rotor grids for all turbines: REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: thrust !< REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: torque_y !< REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: torque_z !< ! !- Rotor tendencies on coordinate grid: REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: rot_tend_x !< REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: rot_tend_y !< REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: rot_tend_z !< ! !- Variables for the rotation of the rotor coordinates: REAL(wp), DIMENSION(1:n_turbines_max,1:3,1:3) :: rot_coord_trans !< matrix for rotation of rotor coordinates REAL(wp), DIMENSION(1:3) :: rot_eigen_rad !< REAL(wp), DIMENSION(1:3) :: rot_eigen_azi !< REAL(wp), DIMENSION(1:3) :: rot_eigen_nor !< REAL(wp), DIMENSION(1:3) :: re !< REAL(wp), DIMENSION(1:3) :: rea !< REAL(wp), DIMENSION(1:3) :: ren !< REAL(wp), DIMENSION(1:3) :: rote !< REAL(wp), DIMENSION(1:3) :: rota !< REAL(wp), DIMENSION(1:3) :: rotn !< ! !-- Fixed variables for the speed controller: LOGICAL :: start_up = .TRUE. !< REAL(wp) :: fcorner !< corner freq for the controller low pass filter REAL(wp) :: om_rate !< rotor speed change REAL(wp) :: region_25_min !< min region 2.5 REAL(wp) :: region_25_slope !< slope in region 2.5 REAL(wp) :: slope15 !< slope in region 1.5 REAL(wp) :: trq_rate !< torque change REAL(wp) :: vs_sysp !< REAL(wp) :: lp_coeff !< coeff for the controller low pass filter REAL(wp), DIMENSION(n_turbines_max) :: rotor_speed_l = 0.0_wp !< local rot speed [rad/s] ! !-- Fixed variables for the yaw controller: INTEGER(iwp) :: wdlon !< INTEGER(iwp) :: wdsho !< LOGICAL, DIMENSION(1:n_turbines_max) :: doyaw = .FALSE. !< REAL(wp), DIMENSION(:) , ALLOCATABLE :: u_inflow !< wind speed at hub REAL(wp), DIMENSION(:) , ALLOCATABLE :: u_inflow_l !< REAL(wp), DIMENSION(:) , ALLOCATABLE :: wdir !< wind direction at hub REAL(wp), DIMENSION(:) , ALLOCATABLE :: wdir_l !< REAL(wp), DIMENSION(:) , ALLOCATABLE :: wd2_l !< local (cpu) short running avg of the wd REAL(wp), DIMENSION(:) , ALLOCATABLE :: wd30_l !< local (cpu) long running avg of the wd REAL(wp), DIMENSION(:) , ALLOCATABLE :: yawdir !< direction to yaw REAL(wp), DIMENSION(:) , ALLOCATABLE :: yaw_angle_l !< local (cpu) yaw angle REAL(wp), DIMENSION(:,:), ALLOCATABLE :: wd2 !< REAL(wp), DIMENSION(:,:), ALLOCATABLE :: wd30 !< ! !-- Variables that have to be saved in the binary file for restarts: REAL(wp), DIMENSION(1:n_turbines_max) :: pitch_angle_old = 0.0_wp !< old constant pitch angle REAL(wp), DIMENSION(1:n_turbines_max) :: generator_speed = 0.0_wp !< curr. generator speed REAL(wp), DIMENSION(1:n_turbines_max) :: generator_speed_f = 0.0_wp !< filtered generator speed REAL(wp), DIMENSION(1:n_turbines_max) :: generator_speed_old = 0.0_wp !< last generator speed REAL(wp), DIMENSION(1:n_turbines_max) :: generator_speed_f_old = 0.0_wp !< last filtered generator speed REAL(wp), DIMENSION(1:n_turbines_max) :: torque_gen = 0.0_wp !< generator torque REAL(wp), DIMENSION(1:n_turbines_max) :: torque_gen_old = 0.0_wp !< last generator torque SAVE INTERFACE wtm_parin MODULE PROCEDURE wtm_parin END INTERFACE wtm_parin INTERFACE wtm_check_parameters MODULE PROCEDURE wtm_check_parameters END INTERFACE wtm_check_parameters INTERFACE wtm_data_output MODULE PROCEDURE wtm_data_output END INTERFACE wtm_data_output INTERFACE wtm_init_arrays MODULE PROCEDURE wtm_init_arrays END INTERFACE wtm_init_arrays INTERFACE wtm_init MODULE PROCEDURE wtm_init END INTERFACE wtm_init INTERFACE wtm_init_output MODULE PROCEDURE wtm_init_output END INTERFACE wtm_init_output INTERFACE wtm_actions MODULE PROCEDURE wtm_actions MODULE PROCEDURE wtm_actions_ij END INTERFACE wtm_actions INTERFACE wtm_rrd_global MODULE PROCEDURE wtm_rrd_global_ftn MODULE PROCEDURE wtm_rrd_global_mpi END INTERFACE wtm_rrd_global INTERFACE wtm_wrd_global MODULE PROCEDURE wtm_wrd_global END INTERFACE wtm_wrd_global PUBLIC & dt_data_output_wtm, & time_wtm, & wind_turbine PUBLIC & wtm_parin, & wtm_check_parameters, & wtm_data_output, & wtm_init_arrays, & wtm_init_output, & wtm_init, & wtm_actions, & wtm_rrd_global, & wtm_wrd_global CONTAINS !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> Parin for &wind_turbine_par for wind turbine model !--------------------------------------------------------------------------------------------------! SUBROUTINE wtm_parin IMPLICIT NONE CHARACTER(LEN=80) :: line !< dummy string that contains the current line of the parameter file NAMELIST /wind_turbine_parameters/ & air_density, tower_diameter, dt_data_output_wtm, & gear_efficiency, gear_ratio, generator_efficiency, & generator_inertia, rotor_inertia, yaw_misalignment_max, & generator_torque_max, generator_torque_rate_max, yaw_misalignment_min, & region_15_min, region_2_min, n_airfoils, n_turbines, & rotor_speed, yaw_angle, pitch_angle, pitch_control, & generator_speed_rated, generator_power_rated, hub_x, hub_y, hub_z, & nacelle_radius, rotor_radius, segment_length_tangential, segment_width_radial, & region_2_slope, speed_control, tilt_angle, time_turbine_on, & smearing_kernel_size, tower_cd, pitch_rate, & yaw_control, yaw_speed, tip_loss_correction ! , nacelle_cd ! !-- Try to find wind turbine model package: REWIND ( 11 ) line = ' ' DO WHILE ( INDEX ( line, '&wind_turbine_parameters' ) == 0 ) READ ( 11, '(A)', END = 12 ) line ENDDO BACKSPACE ( 11 ) ! !-- Read user-defined namelist: READ ( 11, wind_turbine_parameters, ERR = 10, END = 12 ) ! !-- Set flag that indicates that the wind turbine model is switched on: wind_turbine = .TRUE. GOTO 12 10 BACKSPACE ( 11 ) READ ( 11, '(A)' ) line CALL parin_fail_message( 'wind_turbine_parameters', line ) 12 CONTINUE ! TBD Change from continue, mit ierrn machen END SUBROUTINE wtm_parin !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> This routine writes the respective restart data. !--------------------------------------------------------------------------------------------------! SUBROUTINE wtm_wrd_global IMPLICIT NONE IF ( TRIM( restart_data_format_output ) == 'fortran_binary' ) THEN CALL wrd_write_string( 'generator_speed' ) WRITE ( 14 ) generator_speed CALL wrd_write_string( 'generator_speed_f' ) WRITE ( 14 ) generator_speed_f CALL wrd_write_string( 'generator_speed_f_old' ) WRITE ( 14 ) generator_speed_f_old CALL wrd_write_string( 'generator_speed_old' ) WRITE ( 14 ) generator_speed_old CALL wrd_write_string( 'rotor_speed' ) WRITE ( 14 ) rotor_speed CALL wrd_write_string( 'yaw_angle' ) WRITE ( 14 ) yaw_angle CALL wrd_write_string( 'pitch_angle' ) WRITE ( 14 ) pitch_angle CALL wrd_write_string( 'pitch_angle_old' ) WRITE ( 14 ) pitch_angle_old CALL wrd_write_string( 'torque_gen' ) WRITE ( 14 ) torque_gen CALL wrd_write_string( 'torque_gen_old' ) WRITE ( 14 ) torque_gen_old ELSEIF ( restart_data_format_output(1:3) == 'mpi' ) THEN CALL wrd_mpi_io_global_array( 'generator_speed', generator_speed ) CALL wrd_mpi_io_global_array( 'generator_speed_f', generator_speed_f ) CALL wrd_mpi_io_global_array( 'generator_speed_f_old', generator_speed_f_old ) CALL wrd_mpi_io_global_array( 'generator_speed_old', generator_speed_old ) CALL wrd_mpi_io_global_array( 'rotor_speed', rotor_speed ) CALL wrd_mpi_io_global_array( 'yaw_angle', yaw_angle ) CALL wrd_mpi_io_global_array( 'pitch_angle', pitch_angle ) CALL wrd_mpi_io_global_array( 'pitch_angle_old', pitch_angle_old ) CALL wrd_mpi_io_global_array( 'torque_gen', torque_gen ) CALL wrd_mpi_io_global_array( 'torque_gen_old', torque_gen_old ) ENDIF END SUBROUTINE wtm_wrd_global !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> Read module-specific global restart data (Fortran binary format). !--------------------------------------------------------------------------------------------------! SUBROUTINE wtm_rrd_global_ftn( found ) USE control_parameters, & ONLY: length, restart_string IMPLICIT NONE LOGICAL, INTENT(OUT) :: found found = .TRUE. SELECT CASE ( restart_string(1:length) ) CASE ( 'generator_speed' ) READ ( 13 ) generator_speed CASE ( 'generator_speed_f' ) READ ( 13 ) generator_speed_f CASE ( 'generator_speed_f_old' ) READ ( 13 ) generator_speed_f_old CASE ( 'generator_speed_old' ) READ ( 13 ) generator_speed_old CASE ( 'rotor_speed' ) READ ( 13 ) rotor_speed CASE ( 'yaw_angle' ) READ ( 13 ) yaw_angle CASE ( 'pitch_angle' ) READ ( 13 ) pitch_angle CASE ( 'pitch_angle_old' ) READ ( 13 ) pitch_angle_old CASE ( 'torque_gen' ) READ ( 13 ) torque_gen CASE ( 'torque_gen_old' ) READ ( 13 ) torque_gen_old CASE DEFAULT found = .FALSE. END SELECT END SUBROUTINE wtm_rrd_global_ftn !------------------------------------------------------------------------------! ! Description: ! ------------ !> Read module-specific global restart data (MPI-IO). !------------------------------------------------------------------------------! SUBROUTINE wtm_rrd_global_mpi CALL rrd_mpi_io_global_array( 'generator_speed', generator_speed ) CALL rrd_mpi_io_global_array( 'generator_speed_f', generator_speed_f ) CALL rrd_mpi_io_global_array( 'generator_speed_f_old', generator_speed_f_old ) CALL rrd_mpi_io_global_array( 'generator_speed_old', generator_speed_old ) CALL rrd_mpi_io_global_array( 'rotor_speed', rotor_speed ) CALL rrd_mpi_io_global_array( 'yaw_angle', yaw_angle ) CALL rrd_mpi_io_global_array( 'pitch_angle', pitch_angle ) CALL rrd_mpi_io_global_array( 'pitch_angle_old', pitch_angle_old ) CALL rrd_mpi_io_global_array( 'torque_gen', torque_gen ) CALL rrd_mpi_io_global_array( 'torque_gen_old', torque_gen_old ) END SUBROUTINE wtm_rrd_global_mpi !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> Check namelist parameter !--------------------------------------------------------------------------------------------------! SUBROUTINE wtm_check_parameters IMPLICIT NONE IF ( .NOT. input_pids_wtm ) THEN IF ( ( .NOT.speed_control ) .AND. pitch_control ) THEN message_string = 'pitch_control = .TRUE. requires speed_control = .TRUE.' CALL message( 'wtm_check_parameters', 'PA0461', 1, 2, 0, 6, 0 ) ENDIF IF ( ANY( rotor_speed(1:n_turbines) < 0.0 ) ) THEN message_string = 'rotor_speed < 0.0, Please set rotor_speed to ' // & 'a value equal or larger than zero' CALL message( 'wtm_check_parameters', 'PA0462', 1, 2, 0, 6, 0 ) ENDIF IF ( ANY( hub_x(1:n_turbines) == 9999999.9_wp ) .OR. & ANY( hub_y(1:n_turbines) == 9999999.9_wp ) .OR. & ANY( hub_z(1:n_turbines) == 9999999.9_wp ) ) THEN message_string = 'hub_x, hub_y, hub_z have to be given for each turbine.' CALL message( 'wtm_check_parameters', 'PA0463', 1, 2, 0, 6, 0 ) ENDIF ENDIF END SUBROUTINE wtm_check_parameters ! !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> Allocate wind turbine model arrays !--------------------------------------------------------------------------------------------------! SUBROUTINE wtm_init_arrays IMPLICIT NONE REAL(wp) :: delta_r_factor !< REAL(wp) :: delta_r_init !< #if defined( __netcdf ) ! ! Read wtm input file (netcdf) if it exists: IF ( input_pids_wtm ) THEN ! !-- Open the wtm input file: CALL open_read_file( TRIM( input_file_wtm ) // & TRIM( coupling_char ), pids_id ) CALL inquire_num_variables( pids_id, num_var_pids ) ! !-- Allocate memory to store variable names and read them: ALLOCATE( vars_pids(1:num_var_pids) ) CALL inquire_variable_names( pids_id, vars_pids ) ! !-- Input of all wtm parameters: IF ( check_existence( vars_pids, 'tower_diameter' ) ) THEN CALL get_variable( pids_id, 'tower_diameter', tower_diameter(1:n_turbines) ) ENDIF IF ( check_existence( vars_pids, 'rotor_speed' ) ) THEN CALL get_variable( pids_id, 'rotor_speed', rotor_speed(1:n_turbines) ) ENDIF IF ( check_existence( vars_pids, 'pitch_angle' ) ) THEN CALL get_variable( pids_id, 'pitch_angle', pitch_angle(1:n_turbines) ) ENDIF IF ( check_existence( vars_pids, 'yaw_angle' ) ) THEN CALL get_variable( pids_id, 'yaw_angle', yaw_angle(1:n_turbines) ) ENDIF IF ( check_existence( vars_pids, 'hub_x' ) ) THEN CALL get_variable( pids_id, 'hub_x', hub_x(1:n_turbines) ) ENDIF IF ( check_existence( vars_pids, 'hub_y' ) ) THEN CALL get_variable( pids_id, 'hub_y', hub_y(1:n_turbines) ) ENDIF IF ( check_existence( vars_pids, 'hub_z' ) ) THEN CALL get_variable( pids_id, 'hub_z', hub_z(1:n_turbines) ) ENDIF IF ( check_existence( vars_pids, 'nacelle_radius' ) ) THEN CALL get_variable( pids_id, 'nacelle_radius', nacelle_radius(1:n_turbines) ) ENDIF IF ( check_existence( vars_pids, 'rotor_radius' ) ) THEN CALL get_variable( pids_id, 'rotor_radius', rotor_radius(1:n_turbines) ) ENDIF ! ! IF ( check_existence( vars_pids, 'nacelle_cd' ) ) THEN ! CALL get_variable( pids_id, 'nacelle_cd', nacelle_cd(1:n_turbines) ) ! ENDIF IF ( check_existence( vars_pids, 'tower_cd' ) ) THEN CALL get_variable( pids_id, 'tower_cd', tower_cd(1:n_turbines) ) ENDIF ! !-- Close wtm input file: CALL close_input_file( pids_id ) ENDIF #endif ! !-- To be able to allocate arrays with dimension of rotor rings and segments, !-- the maximum possible numbers of rings and segments have to be calculated: ALLOCATE( nrings(1:n_turbines) ) ALLOCATE( delta_r(1:n_turbines) ) nrings(:) = 0 delta_r(:) = 0.0_wp ! !-- Thickness (radial) of each ring and length (tangential) of each segment: delta_r_factor = segment_width_radial delta_t_factor = segment_length_tangential delta_r_init = delta_r_factor * MIN( dx, dy, dz(1) ) DO inot = 1, n_turbines ! !-- Determine number of rings: nrings(inot) = NINT( rotor_radius(inot) / delta_r_init ) delta_r(inot) = rotor_radius(inot) / nrings(inot) ENDDO nrings_max = MAXVAL( nrings ) ALLOCATE( nsegs(1:nrings_max,1:n_turbines) ) ALLOCATE( nsegs_total(1:n_turbines) ) nsegs(:,:) = 0 nsegs_total(:) = 0 DO inot = 1, n_turbines DO ring = 1, nrings(inot) ! !-- Determine number of segments for each ring: nsegs(ring,inot) = MAX( 8, CEILING( delta_r_factor * pi * ( 2.0_wp * ring - 1.0_wp ) / & delta_t_factor ) ) ENDDO ! !-- Total sum of all rotor segments: nsegs_total(inot) = SUM( nsegs(:,inot) ) ENDDO ! !-- Maximum number of segments per ring: nsegs_max = MAXVAL( nsegs ) !! !!-- TODO: Folgendes im Header ausgeben! ! IF ( myid == 0 ) THEN ! PRINT*, 'nrings(1) = ', nrings(1) ! PRINT*, '----------------------------------------------------------------------------------' ! PRINT*, 'nsegs(:,1) = ', nsegs(:,1) ! PRINT*, '----------------------------------------------------------------------------------' ! PRINT*, 'nrings_max = ', nrings_max ! PRINT*, 'nsegs_max = ', nsegs_max ! PRINT*, 'nsegs_total(1) = ', nsegs_total(1) ! ENDIF ! !-- Allocate 1D arrays (dimension = number of turbines): ALLOCATE( i_hub(1:n_turbines) ) ALLOCATE( i_smear(1:n_turbines) ) ALLOCATE( j_hub(1:n_turbines) ) ALLOCATE( j_smear(1:n_turbines) ) ALLOCATE( k_hub(1:n_turbines) ) ALLOCATE( k_smear(1:n_turbines) ) ALLOCATE( torque_total(1:n_turbines) ) ALLOCATE( thrust_rotor(1:n_turbines) ) ! !-- Allocation of the 1D arrays for yaw control: ALLOCATE( yawdir(1:n_turbines) ) ALLOCATE( u_inflow(1:n_turbines) ) ALLOCATE( wdir(1:n_turbines) ) ALLOCATE( u_inflow_l(1:n_turbines) ) ALLOCATE( wdir_l(1:n_turbines) ) ALLOCATE( yaw_angle_l(1:n_turbines) ) ! !-- Allocate 1D arrays (dimension = number of rotor segments): ALLOCATE( alpha_attack(1:nsegs_max) ) ALLOCATE( chord(1:nsegs_max) ) ALLOCATE( phi_rel(1:nsegs_max) ) ALLOCATE( thrust_seg(1:nsegs_max) ) ALLOCATE( torque_seg_y(1:nsegs_max) ) ALLOCATE( torque_seg_z(1:nsegs_max) ) ALLOCATE( turb_cd(1:nsegs_max) ) ALLOCATE( turb_cl(1:nsegs_max) ) ALLOCATE( vrel(1:nsegs_max) ) ALLOCATE( vtheta(1:nsegs_max) ) ! !-- Allocate 2D arrays (dimension = number of rotor rings and segments): ALLOCATE( rbx(1:nrings_max,1:nsegs_max) ) ALLOCATE( rby(1:nrings_max,1:nsegs_max) ) ALLOCATE( rbz(1:nrings_max,1:nsegs_max) ) ALLOCATE( thrust_ring(1:nrings_max,1:nsegs_max) ) ALLOCATE( torque_ring_y(1:nrings_max,1:nsegs_max) ) ALLOCATE( torque_ring_z(1:nrings_max,1:nsegs_max) ) ! !-- Allocate additional 2D arrays: ALLOCATE( rotx(1:n_turbines,1:3) ) ALLOCATE( roty(1:n_turbines,1:3) ) ALLOCATE( rotz(1:n_turbines,1:3) ) ! !-- Allocate 3D arrays (dimension = number of grid points): ALLOCATE( nac_cd_surf(nzb:nzt+1,nysg:nyng,nxlg:nxrg) ) ALLOCATE( rot_tend_x(nzb:nzt+1,nysg:nyng,nxlg:nxrg) ) ALLOCATE( rot_tend_y(nzb:nzt+1,nysg:nyng,nxlg:nxrg) ) ALLOCATE( rot_tend_z(nzb:nzt+1,nysg:nyng,nxlg:nxrg) ) ALLOCATE( thrust(nzb:nzt+1,nysg:nyng,nxlg:nxrg) ) ALLOCATE( torque_y(nzb:nzt+1,nysg:nyng,nxlg:nxrg) ) ALLOCATE( torque_z(nzb:nzt+1,nysg:nyng,nxlg:nxrg) ) ALLOCATE( tow_cd_surf(nzb:nzt+1,nysg:nyng,nxlg:nxrg) ) ! !-- Allocate additional 3D arrays: ALLOCATE( u_int(1:n_turbines,1:nrings_max,1:nsegs_max) ) ALLOCATE( u_int_1_l(1:n_turbines,1:nrings_max,1:nsegs_max) ) ALLOCATE( v_int(1:n_turbines,1:nrings_max,1:nsegs_max) ) ALLOCATE( v_int_1_l(1:n_turbines,1:nrings_max,1:nsegs_max) ) ALLOCATE( w_int(1:n_turbines,1:nrings_max,1:nsegs_max) ) ALLOCATE( w_int_1_l(1:n_turbines,1:nrings_max,1:nsegs_max) ) ! !-- All of the arrays are initialized with a value of zero: i_hub(:) = 0 i_smear(:) = 0 j_hub(:) = 0 j_smear(:) = 0 k_hub(:) = 0 k_smear(:) = 0 torque_total(:) = 0.0_wp thrust_rotor(:) = 0.0_wp IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN generator_speed(:) = 0.0_wp generator_speed_old(:) = 0.0_wp generator_speed_f(:) = 0.0_wp generator_speed_f_old(:) = 0.0_wp pitch_angle_old(:) = 0.0_wp torque_gen(:) = 0.0_wp torque_gen_old(:) = 0.0_wp ENDIF yawdir(:) = 0.0_wp wdir_l(:) = 0.0_wp wdir(:) = 0.0_wp u_inflow(:) = 0.0_wp u_inflow_l(:) = 0.0_wp yaw_angle_l(:) = 0.0_wp ! !-- Allocate 1D arrays (dimension = number of rotor segments): alpha_attack(:) = 0.0_wp chord(:) = 0.0_wp phi_rel(:) = 0.0_wp thrust_seg(:) = 0.0_wp torque_seg_y(:) = 0.0_wp torque_seg_z(:) = 0.0_wp turb_cd(:) = 0.0_wp turb_cl(:) = 0.0_wp vrel(:) = 0.0_wp vtheta(:) = 0.0_wp rbx(:,:) = 0.0_wp rby(:,:) = 0.0_wp rbz(:,:) = 0.0_wp thrust_ring(:,:) = 0.0_wp torque_ring_y(:,:) = 0.0_wp torque_ring_z(:,:) = 0.0_wp rotx(:,:) = 0.0_wp roty(:,:) = 0.0_wp rotz(:,:) = 0.0_wp nac_cd_surf(:,:,:) = 0.0_wp rot_tend_x(:,:,:) = 0.0_wp rot_tend_y(:,:,:) = 0.0_wp rot_tend_z(:,:,:) = 0.0_wp thrust(:,:,:) = 0.0_wp torque_y(:,:,:) = 0.0_wp torque_z(:,:,:) = 0.0_wp tow_cd_surf(:,:,:) = 0.0_wp u_int(:,:,:) = 0.0_wp u_int_1_l(:,:,:) = 0.0_wp v_int(:,:,:) = 0.0_wp v_int_1_l(:,:,:) = 0.0_wp w_int(:,:,:) = 0.0_wp w_int_1_l(:,:,:) = 0.0_wp END SUBROUTINE wtm_init_arrays !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> Initialization of the wind turbine model !--------------------------------------------------------------------------------------------------! SUBROUTINE wtm_init USE control_parameters, & ONLY: dz_stretch_level_start USE exchange_horiz_mod, & ONLY: exchange_horiz IMPLICIT NONE INTEGER(iwp) :: i !< running index INTEGER(iwp) :: j !< running index INTEGER(iwp) :: k !< running index ! !-- Help variables for the smearing function: REAL(wp) :: eps_kernel !< ! !-- Help variables for calculation of the tower drag: INTEGER(iwp) :: tower_n !< INTEGER(iwp) :: tower_s !< INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: index_nacb !< INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: index_nacl !< INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: index_nacr !< INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: index_nact !< REAL(wp), DIMENSION(:,:), ALLOCATABLE :: circle_points !< IF ( debug_output ) CALL debug_message( 'wtm_init', 'start' ) ALLOCATE( index_nacb(1:n_turbines) ) ALLOCATE( index_nacl(1:n_turbines) ) ALLOCATE( index_nacr(1:n_turbines) ) ALLOCATE( index_nact(1:n_turbines) ) ! !--------------------------------------------------------------------------------------------------! !-- Calculation of parameters for the regularization kernel (smearing of the forces) !--------------------------------------------------------------------------------------------------! ! !-- In the following, some of the required parameters for the smearing will be calculated: !-- The kernel is set equal to twice the grid spacing which has turned out to be a reasonable !-- value (see e.g. Troldborg et al. (2013), Wind Energy, DOI: 10.1002/we.1608): eps_kernel = smearing_kernel_size * dx ! !-- The zero point (eps_min) of the polynomial function must be the following if the integral of !-- the polynomial function (for values < eps_min) shall be equal to the integral of the Gaussian !-- function used before: eps_min = ( 105.0_wp / 32.0_wp )**( 1.0_wp / 3.0_wp ) * & pi**( 1.0_wp / 6.0_wp ) * eps_kernel ! !-- Stretching (non-uniform grid spacing) is not considered in the wind turbine model. !-- Therefore, vertical stretching has to be applied above the area where the wtm is active. !-- ABS (...) is required because the default value of dz_stretch_level_start is -9999999.9_wp !-- (negative): IF ( ABS( dz_stretch_level_start(1) ) <= MAXVAL( hub_z(1:n_turbines) ) + & MAXVAL( rotor_radius(1:n_turbines) ) + & eps_min) THEN WRITE( message_string, * ) 'The lowest level where vertical stretching is applied has ' // & 'to be greater than ',MAXVAL( hub_z(1:n_turbines) ) & + MAXVAL( rotor_radius(1:n_turbines) ) + eps_min CALL message( 'wtm_init', 'PA0484', 1, 2, 0, 6, 0 ) ENDIF ! !-- Square of eps_min: eps_min2 = eps_min**2 ! !-- Parameters in the polynomial function: pol_a = 1.0_wp / eps_min**4 pol_b = 2.0_wp / eps_min**2 ! !-- Normalization factor which is the inverse of the integral of the smearing function: eps_factor = 105.0_wp / ( 32.0_wp * pi * eps_min**3 ) !-- Change tilt angle to rad: tilt_angle = tilt_angle * pi / 180.0_wp ! !-- Change yaw angle to rad: IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN yaw_angle(:) = yaw_angle(:) * pi / 180.0_wp ENDIF DO inot = 1, n_turbines ! !-- Rotate the rotor coordinates in case yaw and tilt are defined: CALL wtm_rotate_rotor( inot ) ! !-- Determine the indices of the hub height: i_hub(inot) = INT( hub_x(inot) / dx ) j_hub(inot) = INT( ( hub_y(inot) + 0.5_wp * dy ) / dy ) k_hub(inot) = INT( ( hub_z(inot) + 0.5_wp * dz(1) ) / dz(1) ) ! !-- Determining the area to which the smearing of the forces is applied. !-- As smearing now is effectively applied only for distances smaller than eps_min, the !-- smearing area can be further limited and regarded as a function of eps_min: i_smear(inot) = CEILING( ( rotor_radius(inot) + eps_min ) / dx ) j_smear(inot) = CEILING( ( rotor_radius(inot) + eps_min ) / dy ) k_smear(inot) = CEILING( ( rotor_radius(inot) + eps_min ) / dz(1) ) ENDDO ! !-- Call the wtm_init_speed_control subroutine and calculate the local rotor_speed for the !-- respective processor: IF ( speed_control) THEN CALL wtm_init_speed_control IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN DO inot = 1, n_turbines IF ( nxl > i_hub(inot) ) THEN torque_gen(inot) = 0.0_wp generator_speed_f(inot) = 0.0_wp rotor_speed_l(inot) = 0.0_wp ENDIF IF ( nxr < i_hub(inot) ) THEN torque_gen(inot) = 0.0_wp generator_speed_f(inot) = 0.0_wp rotor_speed_l(inot) = 0.0_wp ENDIF IF ( nys > j_hub(inot) ) THEN torque_gen(inot) = 0.0_wp generator_speed_f(inot) = 0.0_wp rotor_speed_l(inot) = 0.0_wp ENDIF IF ( nyn < j_hub(inot) ) THEN torque_gen(inot) = 0.0_wp generator_speed_f(inot) = 0.0_wp rotor_speed_l(inot) = 0.0_wp ENDIF IF ( ( nxl <= i_hub(inot) ) .AND. ( nxr >= i_hub(inot) ) ) THEN IF ( ( nys <= j_hub(inot) ) .AND. ( nyn >= j_hub(inot) ) ) THEN rotor_speed_l(inot) = generator_speed(inot) / gear_ratio ENDIF ENDIF END DO ENDIF ENDIF ! !--------------------------------------------------------------------------------------------------! !-- Determine the area within each grid cell that overlaps with the area of the nacelle and the !-- tower (needed for calculation of the forces) !--------------------------------------------------------------------------------------------------! ! !-- Note: so far this is only a 2D version, in that the mean flow is perpendicular to the rotor !-- area. ! !-- Allocation of the array containing information on the intersection points between rotor disk !-- and the numerical grid: upper_end = ( ny + 1 ) * 10000 ALLOCATE( circle_points(1:2,1:upper_end) ) circle_points(:,:) = 0.0_wp DO inot = 1, n_turbines ! loop over number of turbines ! !-- Determine the grid index (u-grid) that corresponds to the location of the rotor center !-- (reduces the amount of calculations in the case that the mean flow is perpendicular to the !-- rotor area): i = i_hub(inot) ! !-- Determine the left and the right edge of the nacelle (corresponding grid point indices): index_nacl(inot) = INT( ( hub_y(inot) - nacelle_radius(inot) + 0.5_wp * dy ) / dy ) index_nacr(inot) = INT( ( hub_y(inot) + nacelle_radius(inot) + 0.5_wp * dy ) / dy ) ! !-- Determine the bottom and the top edge of the nacelle (corresponding grid point indices). !-- The grid point index has to be increased by 1, as the first level for the u-component !-- (index 0) is situated below the surface. All points between z=0 and z=dz/s would already !-- be contained in grid box 1: index_nacb(inot) = INT( ( hub_z(inot) - nacelle_radius(inot) ) / dz(1) ) + 1 index_nact(inot) = INT( ( hub_z(inot) + nacelle_radius(inot) ) / dz(1) ) + 1 ! !-- Determine the indices of the grid boxes containing the left and the right boundaries of !-- the tower: tower_n = ( hub_y(inot) + 0.5_wp * tower_diameter(inot) - 0.5_wp * dy ) / dy tower_s = ( hub_y(inot) - 0.5_wp * tower_diameter(inot) - 0.5_wp * dy ) / dy ! !-- Determine the fraction of the grid box area overlapping with the tower area and multiply !-- it with the drag of the tower: IF ( ( nxlg <= i ) .AND. ( nxrg >= i ) ) THEN DO j = nys, nyn ! !-- Loop from south to north boundary of tower: IF ( ( j >= tower_s ) .AND. ( j <= tower_n ) ) THEN DO k = nzb, nzt IF ( k == k_hub(inot) ) THEN IF ( tower_n - tower_s >= 1 ) THEN ! !-- Leftmost and rightmost grid box: IF ( j == tower_s ) THEN tow_cd_surf(k,j,i) = ( hub_z(inot) - & ( k_hub(inot) * dz(1) - 0.5_wp * dz(1) ) ) * & ! extension in z-direction ( ( tower_s + 1.0_wp + 0.5_wp ) * dy - & ( hub_y(inot) - 0.5_wp * tower_diameter(inot) ) ) * & ! extension in y-direction tower_cd(inot) ELSEIF ( j == tower_n ) THEN tow_cd_surf(k,j,i) = ( hub_z(inot) - & ( k_hub(inot) * dz(1) - 0.5_wp * dz(1) ) ) * & ! extension in z-direction ( ( hub_y(inot) + 0.5_wp * tower_diameter(inot) ) - & ( tower_n + 0.5_wp ) * dy ) * & ! extension in y-direction tower_cd(inot) ! !-- Grid boxes inbetween (where tow_cd_surf = grid box area): ELSE tow_cd_surf(k,j,i) = ( hub_z(inot) - & ( k_hub(inot) * dz(1) - 0.5_wp * dz(1) ) ) * dy * & tower_cd(inot) ENDIF ! !-- Tower lies completely within one grid box: ELSE tow_cd_surf(k,j,i) = ( hub_z(inot) - ( k_hub(inot) * & dz(1) - 0.5_wp * dz(1) ) ) * & tower_diameter(inot) * tower_cd(inot) ENDIF ! !-- In case that k is smaller than k_hub the following actions are carried out: ELSEIF ( k < k_hub(inot) ) THEN IF ( ( tower_n - tower_s ) >= 1 ) THEN ! !-- Leftmost and rightmost grid box: IF ( j == tower_s ) THEN tow_cd_surf(k,j,i) = dz(1) * ( ( tower_s + 1 + 0.5_wp ) * dy - & ( hub_y(inot) - 0.5_wp * tower_diameter(inot) ) ) & * tower_cd(inot) ELSEIF ( j == tower_n ) THEN tow_cd_surf(k,j,i) = dz(1) * ( ( hub_y(inot) + 0.5_wp * & tower_diameter(inot) ) - ( tower_n + 0.5_wp ) & * dy ) * tower_cd(inot) ! !-- Grid boxes inbetween (where tow_cd_surf = grid box area): ELSE tow_cd_surf(k,j,i) = dz(1) * dy * tower_cd(inot) ENDIF ! !-- Tower lies completely within one grid box: ELSE tow_cd_surf(k,j,i) = dz(1) * tower_diameter(inot) * tower_cd(inot) ENDIF ! end if larger than grid box ENDIF ! end if k == k_hub ENDDO ! end loop over k ENDIF ! end if inside north and south boundary of tower ENDDO ! end loop over j ENDIF ! end if hub inside domain + ghostpoints CALL exchange_horiz( tow_cd_surf, nbgp ) ! !-- Calculation of the nacelle area !-- CAUTION: Currently disabled due to segmentation faults on the FLOW HPC cluster (Oldenburg) !! !!-- Tabulate the points on the circle that are required in the following for the calculation !!-- of the Riemann integral (node points; they are called circle_points in the following): ! ! dy_int = dy / 10000.0_wp ! ! DO i_ip = 1, upper_end ! yvalue = dy_int * ( i_ip - 0.5_wp ) + 0.5_wp * dy !<--- segmentation fault ! sqrt_arg = nacelle_radius(inot)**2 - ( yvalue - hub_y(inot) )**2 !<--- segmentation fault ! IF ( sqrt_arg >= 0.0_wp ) THEN !! !!-- bottom intersection point ! circle_points(1,i_ip) = hub_z(inot) - SQRT( sqrt_arg ) !! !!-- top intersection point ! circle_points(2,i_ip) = hub_z(inot) + SQRT( sqrt_arg ) !<--- segmentation fault ! ELSE ! circle_points(:,i_ip) = -111111 !<--- segmentation fault ! ENDIF ! ENDDO ! ! ! DO j = nys, nyn !! !!-- In case that the grid box is located completely outside the nacelle (y) it can !!-- automatically be stated that there is no overlap between the grid box and the nacelle !!-- and consequently we can set nac_cd_surf(:,j,i) = 0.0: ! IF ( ( j >= index_nacl(inot) ) .AND. ( j <= index_nacr(inot) ) ) THEN ! DO k = nzb+1, nzt !! !!-- In case that the grid box is located completely outside the nacelle (z) it can !!-- automatically be stated that there is no overlap between the grid box and the !!-- nacelle and consequently we can set nac_cd_surf(k,j,i) = 0.0: ! IF ( ( k >= index_nacb(inot) ) .OR. & ! ( k <= index_nact(inot) ) ) THEN !! !!-- For all other cases Riemann integrals are calculated. Here, the points on the !!-- circle that have been determined above are used in order to calculate the !!-- overlap between the gridbox and the nacelle area (area approached by 10000 !!-- rectangulars dz_int * dy_int): ! DO i_ipg = 1, 10000 ! dz_int = dz ! i_ip = j * 10000 + i_ipg !! !!-- Determine the vertical extension dz_int of the circle within the current !!-- grid box: ! IF ( ( circle_points(2,i_ip) < zw(k) ) .AND. & !<--- segmentation fault ! ( circle_points(2,i_ip) >= zw(k-1) ) ) THEN ! dz_int = dz_int - & !<--- segmentation fault ! ( zw(k) - circle_points(2,i_ip) ) ! ENDIF ! IF ( ( circle_points(1,i_ip) <= zw(k) ) .AND. & !<--- segmentation fault ! ( circle_points(1,i_ip) > zw(k-1) ) ) THEN ! dz_int = dz_int - & ! ( circle_points(1,i_ip) - zw(k-1) ) ! ENDIF ! IF ( zw(k-1) > circle_points(2,i_ip) ) THEN ! dz_int = 0.0_wp ! ENDIF ! IF ( zw(k) < circle_points(1,i_ip) ) THEN ! dz_int = 0.0_wp ! ENDIF ! IF ( ( nxlg <= i ) .AND. ( nxrg >= i ) ) THEN ! nac_cd_surf(k,j,i) = nac_cd_surf(k,j,i) + & !<--- segmentation fault ! dy_int * dz_int * nacelle_cd(inot) ! ENDIF ! ENDDO ! ENDIF ! ENDDO ! ENDIF ! ! ENDDO ! ! CALL exchange_horiz( nac_cd_surf, nbgp ) !<--- segmentation fault ENDDO ! end of loop over turbines tow_cd_surf = tow_cd_surf / ( dx * dy * dz(1) ) ! Normalize tower drag nac_cd_surf = nac_cd_surf / ( dx * dy * dz(1) ) ! Normalize nacelle drag CALL wtm_read_blade_tables IF ( debug_output ) CALL debug_message( 'wtm_init', 'end' ) END SUBROUTINE wtm_init SUBROUTINE wtm_init_output ! INTEGER(iwp) :: ntimesteps !< number of timesteps defined in NetCDF output file ! INTEGER(iwp) :: ntimesteps_max = 80000 !< number of maximum timesteps defined in NetCDF output file INTEGER(iwp) :: return_value !< returned status value of called function INTEGER(iwp) :: n !< running index INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: ndim !< dummy to write dimension ! !-- Create NetCDF output file: #if defined( __netcdf4 ) nc_filename = 'DATA_1D_TS_WTM_NETCDF' // TRIM( coupling_char ) return_value = dom_def_file( nc_filename, 'netcdf4-serial' ) #else message_string = 'Wind turbine model output requires NetCDF version 4. ' // & 'No output file will be created.' CALL message( 'wtm_init_output', 'PA0672', 0, 1, 0, 6, 0 ) #endif IF ( myid == 0 ) THEN ! !-- Define dimensions in output file: ALLOCATE( ndim(1:n_turbines) ) DO n = 1, n_turbines ndim(n) = n ENDDO return_value = dom_def_dim( nc_filename, & dimension_name = 'turbine', & output_type = 'int32', & bounds = (/1_iwp, n_turbines/), & values_int32 = ndim ) DEALLOCATE( ndim ) return_value = dom_def_dim( nc_filename, & dimension_name = 'time', & output_type = 'real32', & bounds = (/1_iwp/), & values_realwp = (/0.0_wp/) ) variable_name = 'x' return_value = dom_def_var( nc_filename, & variable_name = variable_name, & dimension_names = (/'turbine'/), & output_type = 'real32' ) variable_name = 'y' return_value = dom_def_var( nc_filename, & variable_name = variable_name, & dimension_names = (/'turbine'/), & output_type = 'real32' ) variable_name = 'z' return_value = dom_def_var( nc_filename, & variable_name = variable_name, & dimension_names = (/'turbine'/), & output_type = 'real32' ) variable_name = 'rotor_diameter' return_value = dom_def_var( nc_filename, & variable_name = variable_name, & dimension_names = (/'turbine'/), & output_type = 'real32' ) variable_name = 'tower_diameter' return_value = dom_def_var( nc_filename, & variable_name = variable_name, & dimension_names = (/'turbine'/), & output_type = 'real32' ) return_value = dom_def_att( nc_filename, & variable_name = 'time', & attribute_name = 'units', & value = 'seconds since ' // origin_date_time ) return_value = dom_def_att( nc_filename, & variable_name = 'x', & attribute_name = 'units', & value = 'm' ) return_value = dom_def_att( nc_filename, & variable_name = 'y', & attribute_name = 'units', & value = 'm' ) return_value = dom_def_att( nc_filename, & variable_name = 'z', & attribute_name = 'units', & value = 'm' ) return_value = dom_def_att( nc_filename, & variable_name = 'rotor_diameter', & attribute_name = 'units', & value = 'm' ) return_value = dom_def_att( nc_filename, & variable_name = 'tower_diameter', & attribute_name = 'units', & value = 'm' ) return_value = dom_def_att( nc_filename, & variable_name = 'x', & attribute_name = 'long_name', & value = 'x location of rotor center' ) return_value = dom_def_att( nc_filename, & variable_name = 'y', & attribute_name = 'long_name', & value = 'y location of rotor center' ) return_value = dom_def_att( nc_filename, & variable_name = 'z', & attribute_name = 'long_name', & value = 'z location of rotor center' ) return_value = dom_def_att( nc_filename, & variable_name = 'turbine_name', & attribute_name = 'long_name', & value = 'turbine name') return_value = dom_def_att( nc_filename, & variable_name = 'rotor_diameter', & attribute_name = 'long_name', & value = 'rotor diameter') return_value = dom_def_att( nc_filename, & variable_name = 'tower_diameter', & attribute_name = 'long_name', & value = 'tower diameter') return_value = dom_def_att( nc_filename, & variable_name = 'time', & attribute_name = 'standard_name', & value = 'time') return_value = dom_def_att( nc_filename, & variable_name = 'time', & attribute_name = 'axis', & value = 'T') return_value = dom_def_att( nc_filename, & variable_name = 'x', & attribute_name = 'axis', & value = 'X' ) return_value = dom_def_att( nc_filename, & variable_name = 'y', & attribute_name = 'axis', & value = 'Y' ) variable_name = 'generator_power' return_value = dom_def_var( nc_filename, & variable_name = variable_name, & dimension_names = (/ 'turbine', 'time ' /), & output_type = 'real32' ) return_value = dom_def_att( nc_filename, & variable_name = variable_name, & attribute_name = 'units', & value = 'W' ) variable_name = 'generator_speed' return_value = dom_def_var( nc_filename, & variable_name = variable_name, & dimension_names = (/ 'turbine', 'time ' /), & output_type = 'real32' ) return_value = dom_def_att( nc_filename, & variable_name = variable_name, & attribute_name = 'units', & value = 'rad/s' ) variable_name = 'generator_torque' return_value = dom_def_var( nc_filename, & variable_name = variable_name, & dimension_names = (/ 'turbine', 'time ' /), & output_type = 'real32' ) return_value = dom_def_att( nc_filename, & variable_name = variable_name, & attribute_name = 'units', & value = 'Nm' ) variable_name = 'pitch_angle' return_value = dom_def_var( nc_filename, & variable_name = variable_name, & dimension_names = (/ 'turbine', 'time ' /), & output_type = 'real32' ) return_value = dom_def_att( nc_filename, & variable_name = variable_name, & attribute_name = 'units', & value = 'degrees' ) variable_name = 'rotor_power' return_value = dom_def_var( nc_filename, & variable_name = variable_name, & dimension_names = (/ 'turbine', 'time ' /), & output_type = 'real32' ) return_value = dom_def_att( nc_filename, & variable_name = variable_name, & attribute_name = 'units', & value = 'W' ) variable_name = 'rotor_speed' return_value = dom_def_var( nc_filename, & variable_name = variable_name, & dimension_names = (/ 'turbine', 'time ' /), & output_type = 'real32' ) return_value = dom_def_att( nc_filename, & variable_name = variable_name, & attribute_name = 'units', & value = 'rad/s' ) variable_name = 'rotor_thrust' return_value = dom_def_var( nc_filename, & variable_name = variable_name, & dimension_names = (/ 'turbine', 'time ' /), & output_type = 'real32' ) return_value = dom_def_att( nc_filename, & variable_name = variable_name, & attribute_name = 'units', & value = 'N' ) variable_name = 'rotor_torque' return_value = dom_def_var( nc_filename, & variable_name = variable_name, & dimension_names = (/ 'turbine', 'time ' /), & output_type = 'real32' ) return_value = dom_def_att( nc_filename, & variable_name = variable_name, & attribute_name = 'units', & value = 'Nm' ) variable_name = 'wind_direction' return_value = dom_def_var( nc_filename, & variable_name = variable_name, & dimension_names = (/ 'turbine', 'time ' /), & output_type = 'real32' ) return_value = dom_def_att( nc_filename, & variable_name = variable_name, & attribute_name = 'units', & value = 'degrees' ) variable_name = 'yaw_angle' return_value = dom_def_var( nc_filename, & variable_name = variable_name, & dimension_names = (/ 'turbine', 'time ' /), & output_type = 'real32' ) return_value = dom_def_att( nc_filename, & variable_name = variable_name, & attribute_name = 'units', & value = 'degrees' ) ENDIF END SUBROUTINE !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> Read in layout of the rotor blade , the lift and drag tables and the distribution of lift and !> drag tables along the blade !--------------------------------------------------------------------------------------------------! ! SUBROUTINE wtm_read_blade_tables IMPLICIT NONE CHARACTER(200) :: chmess !< Read in string INTEGER(iwp) :: ii !< running index INTEGER(iwp) :: jj !< running index INTEGER(iwp) :: ierrn !< INTEGER(iwp) :: dlen !< no. rows of local table INTEGER(iwp) :: dlenbl !< no. rows of cd, cl table INTEGER(iwp) :: dlenbl_int !< no. rows of interpolated cd, cl tables INTEGER(iwp) :: ialpha !< table position of current alpha value INTEGER(iwp) :: iialpha !< INTEGER(iwp) :: iir !< INTEGER(iwp) :: radres !< radial resolution INTEGER(iwp) :: t1 !< no. of airfoil INTEGER(iwp) :: t2 !< no. of airfoil INTEGER(iwp) :: trow !< REAL(wp) :: alpha_attack_i !< REAL(wp) :: weight_a !< REAL(wp) :: weight_b !< INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: ttoint1 !< INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: ttoint2 !< REAL(wp), DIMENSION(:), ALLOCATABLE :: turb_cd_sel1 !< REAL(wp), DIMENSION(:), ALLOCATABLE :: turb_cd_sel2 !< REAL(wp), DIMENSION(:), ALLOCATABLE :: turb_cl_sel1 !< REAL(wp), DIMENSION(:), ALLOCATABLE :: turb_cl_sel2 !< REAL(wp), DIMENSION(:), ALLOCATABLE :: read_cl_cd !< read in var array REAL(wp), DIMENSION(:), ALLOCATABLE :: alpha_attack_tab !< REAL(wp), DIMENSION(:), ALLOCATABLE :: trad1 !< REAL(wp), DIMENSION(:), ALLOCATABLE :: trad2 !< REAL(wp), DIMENSION(:,:), ALLOCATABLE :: turb_cd_table !< REAL(wp), DIMENSION(:,:), ALLOCATABLE :: turb_cl_table !< ALLOCATE ( read_cl_cd(1:2 * n_airfoils + 1) ) ! !-- Read in the distribution of lift and drag tables along the blade, the layout of the rotor !-- blade and the lift and drag tables: OPEN ( 90, FILE='WTM_DATA', STATUS='OLD', FORM='FORMATTED', IOSTAT=ierrn ) IF ( ierrn /= 0 ) THEN message_string = 'file WTM_DATA does not exist' CALL message( 'wtm_init', 'PA0464', 1, 2, 0, 6, 0 ) ENDIF ! !-- Read distribution table: dlen = 0 READ ( 90, '(3/)' ) rloop3: DO READ ( 90, *, IOSTAT=ierrn ) chmess IF ( ierrn < 0 .OR. chmess == '#' .OR. chmess == '') EXIT rloop3 dlen = dlen + 1 ENDDO rloop3 ALLOCATE( trad1(1:dlen), trad2(1:dlen), ttoint1(1:dlen), ttoint2(1:dlen) ) DO jj = 1, dlen+1 BACKSPACE ( 90, IOSTAT=ierrn ) ENDDO DO jj = 1, dlen READ ( 90, * ) trad1(jj), trad2(jj), ttoint1(jj), ttoint2(jj) ENDDO ! !-- Read layout table: dlen = 0 READ ( 90, '(3/)') rloop1: DO READ ( 90, *, IOSTAT=ierrn ) chmess IF ( ierrn < 0 .OR. chmess == '#' .OR. chmess == '') EXIT rloop1 dlen = dlen + 1 ENDDO rloop1 ALLOCATE( lrd(1:dlen), ard(1:dlen), crd(1:dlen) ) DO jj = 1, dlen + 1 BACKSPACE ( 90, IOSTAT=ierrn ) ENDDO DO jj = 1, dlen READ ( 90, * ) lrd(jj), ard(jj), crd(jj) ENDDO ! !-- Read tables (turb_cl(alpha),turb_cd(alpha) for the different profiles: dlen = 0 READ ( 90, '(3/)' ) rloop2: DO READ ( 90, *, IOSTAT=ierrn ) chmess IF ( ierrn < 0 .OR. chmess == '#' .OR. chmess == '') EXIT rloop2 dlen = dlen + 1 ENDDO rloop2 ALLOCATE( alpha_attack_tab(1:dlen), turb_cl_table(1:dlen,1:n_airfoils), & turb_cd_table(1:dlen,1:n_airfoils) ) DO jj = 1, dlen + 1 BACKSPACE ( 90, IOSTAT=ierrn ) ENDDO DO jj = 1, dlen READ ( 90, * ) read_cl_cd alpha_attack_tab(jj) = read_cl_cd(1) DO ii = 1, n_airfoils turb_cl_table(jj,ii) = read_cl_cd(ii * 2) turb_cd_table(jj,ii) = read_cl_cd(ii * 2 + 1) ENDDO ENDDO dlenbl = dlen CLOSE ( 90 ) ! !-- For each possible radial position (resolution: 0.1 m --> 631 values if rotor_radius(1)=63m) !-- and each possible angle of attack (resolution: 0.1 degrees --> 3601 values!) determine the !-- lift and drag coefficient by interpolating between the tabulated values of each table !-- (interpolate to current angle of attack) and between the tables (interpolate to current !-- radial position): ALLOCATE( turb_cl_sel1(1:dlenbl) ) ALLOCATE( turb_cl_sel2(1:dlenbl) ) ALLOCATE( turb_cd_sel1(1:dlenbl) ) ALLOCATE( turb_cd_sel2(1:dlenbl) ) radres = INT( rotor_radius(1) * 10.0_wp ) + 1_iwp dlenbl_int = INT( 360.0_wp / accu_cl_cd_tab ) + 1_iwp ALLOCATE( turb_cl_tab(1:dlenbl_int,1:radres) ) ALLOCATE( turb_cd_tab(1:dlenbl_int,1:radres) ) DO iir = 1, radres ! loop over radius cur_r = ( iir - 1_iwp ) * 0.1_wp ! !-- Find position in table 1: lct = MINLOC( ABS( trad1 - cur_r ) ) ! lct(1) = lct(1) IF ( ( trad1(lct(1)) - cur_r ) > 0.0 ) THEN lct(1) = lct(1) - 1 ENDIF trow = lct(1) ! !-- Calculate weights for radius interpolation: weight_a = ( trad2(trow) - cur_r ) / ( trad2(trow) - trad1(trow) ) weight_b = ( cur_r - trad1(trow) ) / ( trad2(trow) - trad1(trow) ) t1 = ttoint1(trow) t2 = ttoint2(trow) IF ( t1 == t2 ) THEN ! if both are the same, the weights are NaN weight_a = 0.5_wp ! then do interpolate in between same twice weight_b = 0.5_wp ! using 0.5 as weight ENDIF IF ( t1 == 0 .AND. t2 == 0 ) THEN turb_cd_sel1 = 0.0_wp turb_cd_sel2 = 0.0_wp turb_cl_sel1 = 0.0_wp turb_cl_sel2 = 0.0_wp turb_cd_tab(1,iir) = 0.0_wp ! For -180 degrees (iialpha=1) the values turb_cl_tab(1,iir) = 0.0_wp ! for each radius has to be set ! explicitly ELSE turb_cd_sel1 = turb_cd_table(:,t1) turb_cd_sel2 = turb_cd_table(:,t2) turb_cl_sel1 = turb_cl_table(:,t1) turb_cl_sel2 = turb_cl_table(:,t2) ! !-- For -180 degrees (iialpha=1) the values for each radius has to be set explicitly: turb_cd_tab(1,iir) = ( weight_a * turb_cd_table(1,t1) + weight_b * turb_cd_table(1,t2) ) turb_cl_tab(1,iir) = ( weight_a * turb_cl_table(1,t1) + weight_b * turb_cl_table(1,t2) ) ENDIF DO iialpha = 2, dlenbl_int ! loop over angles alpha_attack_i = -180.0_wp + REAL( iialpha-1 ) * accu_cl_cd_tab ialpha = 1 DO WHILE ( ( alpha_attack_i > alpha_attack_tab(ialpha) ) .AND. ( ialpha < dlen ) ) ialpha = ialpha + 1 ENDDO ! !-- Interpolation of lift and drag coefficiencts on fine grid of radius segments and angles !-- of attack: turb_cl_tab(iialpha,iir) = ( alpha_attack_tab(ialpha) - alpha_attack_i ) / & ( alpha_attack_tab(ialpha) - alpha_attack_tab(ialpha-1) ) * & ( weight_a * turb_cl_sel1(ialpha-1) + & weight_b * turb_cl_sel2(ialpha-1) ) + & ( alpha_attack_i - alpha_attack_tab(ialpha-1) ) / & ( alpha_attack_tab(ialpha) - alpha_attack_tab(ialpha-1) ) * & ( weight_a * turb_cl_sel1(ialpha) + & weight_b * turb_cl_sel2(ialpha) ) turb_cd_tab(iialpha,iir) = ( alpha_attack_tab(ialpha) - alpha_attack_i ) / & ( alpha_attack_tab(ialpha) - alpha_attack_tab(ialpha-1) ) * & ( weight_a * turb_cd_sel1(ialpha-1) + & weight_b * turb_cd_sel2(ialpha-1) ) + & ( alpha_attack_i - alpha_attack_tab(ialpha-1) ) / & ( alpha_attack_tab(ialpha) - alpha_attack_tab(ialpha-1) ) * & ( weight_a * turb_cd_sel1(ialpha) + & weight_b * turb_cd_sel2(ialpha) ) ENDDO ! end loop over angles of attack ENDDO ! end loop over radius END SUBROUTINE wtm_read_blade_tables !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> The projection matrix for the coordinate system of therotor disc in respect to the yaw and tilt !> angle of the rotor is calculated !--------------------------------------------------------------------------------------------------! SUBROUTINE wtm_rotate_rotor( inot ) IMPLICIT NONE INTEGER(iwp) :: inot ! !-- Calculation of the rotation matrix for the application of the tilt to the rotors: rot_eigen_rad(1) = SIN( yaw_angle(inot) ) ! x-component of the radial eigenvector rot_eigen_rad(2) = COS( yaw_angle(inot) ) ! y-component of the radial eigenvector rot_eigen_rad(3) = 0.0_wp ! z-component of the radial eigenvector rot_eigen_azi(1) = 0.0_wp ! x-component of the azimuth eigenvector rot_eigen_azi(2) = 0.0_wp ! y-component of the azimuth eigenvector rot_eigen_azi(3) = 1.0_wp ! z-component of the azimuth eigenvector rot_eigen_nor(1) = COS( yaw_angle(inot) ) ! x-component of the normal eigenvector rot_eigen_nor(2) = -SIN( yaw_angle(inot) ) ! y-component of the normal eigenvector rot_eigen_nor(3) = 0.0_wp ! z-component of the normal eigenvector ! !-- Calculation of the coordinate transformation matrix to apply a tilt to the rotor. !-- If tilt = 0, rot_coord_trans is a unit matrix. rot_coord_trans(inot,1,1) = rot_eigen_rad(1)**2 * & ( 1.0_wp - COS( tilt_angle ) ) + COS( tilt_angle ) rot_coord_trans(inot,1,2) = rot_eigen_rad(1) * rot_eigen_rad(2) * & ( 1.0_wp - COS( tilt_angle ) ) - & rot_eigen_rad(3) * SIN( tilt_angle ) rot_coord_trans(inot,1,3) = rot_eigen_rad(1) * rot_eigen_rad(3) * & ( 1.0_wp - COS( tilt_angle ) ) + & rot_eigen_rad(2) * SIN( tilt_angle ) rot_coord_trans(inot,2,1) = rot_eigen_rad(2) * rot_eigen_rad(1) * & ( 1.0_wp - COS( tilt_angle ) ) + & rot_eigen_rad(3) * SIN( tilt_angle ) rot_coord_trans(inot,2,2) = rot_eigen_rad(2)**2 * & ( 1.0_wp - COS( tilt_angle ) ) + COS( tilt_angle ) rot_coord_trans(inot,2,3) = rot_eigen_rad(2) * rot_eigen_rad(3) * & ( 1.0_wp - COS( tilt_angle ) ) - & rot_eigen_rad(1) * SIN( tilt_angle ) rot_coord_trans(inot,3,1) = rot_eigen_rad(3) * rot_eigen_rad(1) * & ( 1.0_wp - COS( tilt_angle ) ) - & rot_eigen_rad(2) * SIN( tilt_angle ) rot_coord_trans(inot,3,2) = rot_eigen_rad(3) * rot_eigen_rad(2) * & ( 1.0_wp - COS( tilt_angle ) ) + & rot_eigen_rad(1) * SIN( tilt_angle ) rot_coord_trans(inot,3,3) = rot_eigen_rad(3)**2 * & ( 1.0_wp - COS( tilt_angle ) ) + COS( tilt_angle ) ! !-- Vectors for the Transformation of forces from the rotor's spheric coordinate system to the !-- cartesian coordinate system: rotx(inot,:) = MATMUL( rot_coord_trans(inot,:,:), rot_eigen_nor ) roty(inot,:) = MATMUL( rot_coord_trans(inot,:,:), rot_eigen_rad ) rotz(inot,:) = MATMUL( rot_coord_trans(inot,:,:), rot_eigen_azi ) END SUBROUTINE wtm_rotate_rotor !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> Calculation of the forces generated by the wind turbine !--------------------------------------------------------------------------------------------------! SUBROUTINE wtm_forces IMPLICIT NONE INTEGER(iwp) :: i, j, k !< loop indices INTEGER(iwp) :: ii, jj, kk !< INTEGER(iwp) :: inot !< turbine loop index (turbine id) INTEGER(iwp) :: iialpha, iir !< INTEGER(iwp) :: rseg !< INTEGER(iwp) :: ring !< REAL(wp) :: flag !< flag to mask topography grid points REAL(wp) :: sin_rot, cos_rot !< REAL(wp) :: sin_yaw, cos_yaw !< REAL(wp) :: aa, bb, cc, dd !< interpolation distances REAL(wp) :: gg !< interpolation volume var REAL(wp) :: dist_u_3d, dist_v_3d, dist_w_3d !< smearing distances ! !-- Variables for pitch control: INTEGER(iwp), DIMENSION(1) :: lct = 0 LOGICAL :: pitch_sw = .FALSE. REAL(wp), DIMENSION(1) :: rad_d = 0.0_wp REAL(wp) :: tl_factor !< factor for tip loss correction CALL cpu_log( log_point_s(61), 'wtm_forces', 'start' ) IF ( time_since_reference_point >= time_turbine_on ) THEN ! !-- Set forces to zero for each new time step: thrust(:,:,:) = 0.0_wp torque_y(:,:,:) = 0.0_wp torque_z(:,:,:) = 0.0_wp torque_total(:) = 0.0_wp rot_tend_x(:,:,:) = 0.0_wp rot_tend_y(:,:,:) = 0.0_wp rot_tend_z(:,:,:) = 0.0_wp thrust_rotor(:) = 0.0_wp ! !-- Loop over number of turbines: DO inot = 1, n_turbines cos_yaw = COS(yaw_angle(inot)) sin_yaw = SIN(yaw_angle(inot)) ! !-- Loop over rings of each turbine: !$OMP PARALLEL PRIVATE (ring, rseg, thrust_seg, torque_seg_y, torque_seg_z, sin_rot, & !$OMP& cos_rot, re, rbx, rby, rbz, ii, jj, kk, aa, bb, cc, dd, gg) !$OMP DO DO ring = 1, nrings(inot) thrust_seg(:) = 0.0_wp torque_seg_y(:) = 0.0_wp torque_seg_z(:) = 0.0_wp ! !-- Determine distance between each ring (center) and the hub: cur_r = (ring - 0.5_wp) * delta_r(inot) ! !-- Loop over segments of each ring of each turbine: DO rseg = 1, nsegs(ring,inot) ! !-- !----------------------------------------------------------------------------------! !-- !-- Determine coordinates of the ring segments --! !-- !----------------------------------------------------------------------------------! ! !-- Determine angle of ring segment towards zero degree angle of rotor system !-- (at zero degree rotor direction vectors aligned with y-axis): phi_rotor = rseg * 2.0_wp * pi / nsegs(ring,inot) cos_rot = COS( phi_rotor ) sin_rot = SIN( phi_rotor ) !-- Now the direction vectors can be determined with respect to the yaw and tilt angle: re(1) = cos_rot * sin_yaw re(2) = cos_rot * cos_yaw re(3) = sin_rot rote = MATMUL( rot_coord_trans(inot,:,:), re ) ! !-- Coordinates of the single segments (center points): rbx(ring,rseg) = hub_x(inot) + cur_r * rote(1) rby(ring,rseg) = hub_y(inot) + cur_r * rote(2) rbz(ring,rseg) = hub_z(inot) + cur_r * rote(3) !-- !----------------------------------------------------------------------------------! !-- !-- Interpolation of the velocity components from the cartesian grid point to --! !-- !-- the coordinates of each ring segment (follows a method used in the --! !-- !-- particle model) --! !-- !----------------------------------------------------------------------------------! u_int(inot,ring,rseg) = 0.0_wp u_int_1_l(inot,ring,rseg) = 0.0_wp v_int(inot,ring,rseg) = 0.0_wp v_int_1_l(inot,ring,rseg) = 0.0_wp w_int(inot,ring,rseg) = 0.0_wp w_int_1_l(inot,ring,rseg) = 0.0_wp ! !-- Interpolation of the u-component: ii = rbx(ring,rseg) * ddx jj = ( rby(ring,rseg) - 0.5_wp * dy ) * ddy kk = ( rbz(ring,rseg) + 0.5_wp * dz(1) ) / dz(1) ! !-- Interpolate only if all required information is available on the current PE: IF ( ( ii >= nxl ) .AND. ( ii <= nxr ) ) THEN IF ( ( jj >= nys ) .AND. ( jj <= nyn ) ) THEN aa = ( ( ii + 1 ) * dx - rbx(ring,rseg) ) * & ( ( jj + 1 + 0.5_wp ) * dy - rby(ring,rseg) ) bb = ( rbx(ring,rseg) - ii * dx ) * & ( ( jj + 1 + 0.5_wp ) * dy - rby(ring,rseg) ) cc = ( ( ii+1 ) * dx - rbx(ring,rseg) ) * & ( rby(ring,rseg) - ( jj + 0.5_wp ) * dy ) dd = ( rbx(ring,rseg) - ii * dx ) * & ( rby(ring,rseg) - ( jj + 0.5_wp ) * dy ) gg = dx * dy u_int_l = ( aa * u(kk,jj,ii) + bb * u(kk,jj,ii+1) + cc * u(kk,jj+1,ii) & + dd * u(kk,jj+1,ii+1) ) / gg u_int_u = ( aa * u(kk+1,jj,ii) + bb * u(kk+1,jj,ii+1) + cc * u(kk+1,jj+1,ii) & + dd * u(kk+1,jj+1,ii+1) ) / gg u_int_1_l(inot,ring,rseg) = u_int_l + ( rbz(ring,rseg) - zu(kk) ) / dz(1) * & ( u_int_u - u_int_l ) ELSE u_int_1_l(inot,ring,rseg) = 0.0_wp ENDIF ELSE u_int_1_l(inot,ring,rseg) = 0.0_wp ENDIF ! !-- Interpolation of the v-component: ii = ( rbx(ring,rseg) - 0.5_wp * dx ) * ddx jj = rby(ring,rseg) * ddy kk = ( rbz(ring,rseg) + 0.5_wp * dz(1) ) / dz(1) ! !-- Interpolate only if all required information is available on the current PE: IF ( ( ii >= nxl ) .AND. ( ii <= nxr ) ) THEN IF ( ( jj >= nys ) .AND. ( jj <= nyn ) ) THEN aa = ( ( ii + 1 + 0.5_wp ) * dx - rbx(ring,rseg) ) * & ( ( jj + 1 ) * dy - rby(ring,rseg) ) bb = ( rbx(ring,rseg) - ( ii + 0.5_wp ) * dx ) * & ( ( jj + 1 ) * dy - rby(ring,rseg) ) cc = ( ( ii + 1 + 0.5_wp ) * dx - rbx(ring,rseg) ) * & ( rby(ring,rseg) - jj * dy ) dd = ( rbx(ring,rseg) - ( ii + 0.5_wp ) * dx ) * & ( rby(ring,rseg) - jj * dy ) gg = dx * dy v_int_l = ( aa * v(kk,jj,ii) + bb * v(kk,jj,ii+1) + cc * v(kk,jj+1,ii) & + dd * v(kk,jj+1,ii+1) ) / gg v_int_u = ( aa * v(kk+1,jj,ii) + bb * v(kk+1,jj,ii+1) + cc * v(kk+1,jj+1,ii) & + dd * v(kk+1,jj+1,ii+1) ) / gg v_int_1_l(inot,ring,rseg) = v_int_l + ( rbz(ring,rseg) - zu(kk) ) / dz(1) * & ( v_int_u - v_int_l ) ELSE v_int_1_l(inot,ring,rseg) = 0.0_wp ENDIF ELSE v_int_1_l(inot,ring,rseg) = 0.0_wp ENDIF ! !-- Interpolation of the w-component: ii = ( rbx(ring,rseg) - 0.5_wp * dx ) * ddx jj = ( rby(ring,rseg) - 0.5_wp * dy ) * ddy kk = rbz(ring,rseg) / dz(1) ! !-- Interpolate only if all required information is available on the current PE: IF ( ( ii >= nxl ) .AND. ( ii <= nxr ) ) THEN IF ( ( jj >= nys ) .AND. ( jj <= nyn ) ) THEN aa = ( ( ii + 1 + 0.5_wp ) * dx - rbx(ring,rseg) ) * & ( ( jj + 1 + 0.5_wp ) * dy - rby(ring,rseg) ) bb = ( rbx(ring,rseg) - ( ii + 0.5_wp ) * dx ) * & ( ( jj + 1 + 0.5_wp ) * dy - rby(ring,rseg) ) cc = ( ( ii + 1 + 0.5_wp ) * dx - rbx(ring,rseg) ) * & ( rby(ring,rseg) - ( jj + 0.5_wp ) * dy ) dd = ( rbx(ring,rseg) - ( ii + 0.5_wp ) * dx ) * & ( rby(ring,rseg) - ( jj + 0.5_wp ) * dy ) gg = dx * dy w_int_l = ( aa * w(kk,jj,ii) + bb * w(kk,jj,ii+1) + cc * w(kk,jj+1,ii) & + dd * w(kk,jj+1,ii+1) ) / gg w_int_u = ( aa * w(kk+1,jj,ii) + bb * w(kk+1,jj,ii+1) + cc * w(kk+1,jj+1,ii) & + dd * w(kk+1,jj+1,ii+1) ) / gg w_int_1_l(inot,ring,rseg) = w_int_l + ( rbz(ring,rseg) - zw(kk) ) / dz(1) * & ( w_int_u - w_int_l ) ELSE w_int_1_l(inot,ring,rseg) = 0.0_wp ENDIF ELSE w_int_1_l(inot,ring,rseg) = 0.0_wp ENDIF ENDDO ENDDO !$OMP END PARALLEL ENDDO ! !-- Exchange between PEs (information required on each PE): #if defined( __parallel ) CALL MPI_ALLREDUCE( u_int_1_l, u_int, n_turbines * MAXVAL(nrings) * & MAXVAL(nsegs), MPI_REAL, MPI_SUM, comm2d, ierr ) CALL MPI_ALLREDUCE( v_int_1_l, v_int, n_turbines * MAXVAL(nrings) * & MAXVAL(nsegs), MPI_REAL, MPI_SUM, comm2d, ierr ) CALL MPI_ALLREDUCE( w_int_1_l, w_int, n_turbines * MAXVAL(nrings) * & MAXVAL(nsegs), MPI_REAL, MPI_SUM, comm2d, ierr ) #else u_int = u_int_1_l v_int = v_int_1_l w_int = w_int_1_l #endif ! !-- Loop over number of turbines: DO inot = 1, n_turbines pit_loop: DO IF ( pitch_sw ) THEN torque_total(inot) = 0.0_wp thrust_rotor(inot) = 0.0_wp pitch_angle(inot) = pitch_angle(inot) + 0.25_wp ! IF ( myid == 0 ) PRINT*, 'Pitch', inot, pitch_angle(inot) ELSE cos_yaw = COS( yaw_angle(inot) ) sin_yaw = SIN( yaw_angle(inot) ) IF ( pitch_control ) THEN pitch_angle(inot) = MAX( pitch_angle_old(inot) - pitch_rate * dt_3d , 0.0_wp ) ENDIF ENDIF ! !-- Loop over rings of each turbine: !$OMP PARALLEL PRIVATE (ring, rseg, sin_rot, cos_rot, re, rea, ren, rote, rota, rotn, & !$OMP& vtheta, phi_rel, lct, rad_d, alpha_attack, vrel, & !$OMP& chord, iialpha, iir, turb_cl, tl_factor, thrust_seg, & !$OMP& torque_seg_y, turb_cd, torque_seg_z, thrust_ring, & !$OMP& torque_ring_y, torque_ring_z) !$OMP DO DO ring = 1, nrings(inot) ! !-- Determine distance between each ring (center) and the hub: cur_r = ( ring - 0.5_wp ) * delta_r(inot) ! !-- Loop over segments of each ring of each turbine: DO rseg = 1, nsegs(ring,inot) ! !-- Determine angle of ring segment towards zero degree angle of rotor system !-- (at zero degree rotor direction vectors aligned with y-axis): phi_rotor = rseg * 2.0_wp * pi / nsegs(ring,inot) cos_rot = COS( phi_rotor ) sin_rot = SIN( phi_rotor ) ! !-- Now the direction vectors can be determined with respect to the yaw and tilt angle: re(1) = cos_rot * sin_yaw re(2) = cos_rot * cos_yaw re(3) = sin_rot ! The current unit vector in azimuthal direction: rea(1) = - sin_rot * sin_yaw rea(2) = - sin_rot * cos_yaw rea(3) = cos_rot ! !-- To respect the yawing angle for the calculations of velocities and forces the !-- unit vectors perpendicular to the rotor area in direction of the positive yaw !-- angle are defined: ren(1) = cos_yaw ren(2) = - sin_yaw ren(3) = 0.0_wp ! !-- Multiplication with the coordinate transformation matrix gives the final unit !-- vector with consideration of the rotor tilt: rote = MATMUL( rot_coord_trans(inot,:,:), re ) rota = MATMUL( rot_coord_trans(inot,:,:), rea ) rotn = MATMUL( rot_coord_trans(inot,:,:), ren ) ! !-- Coordinates of the single segments (center points): rbx(ring,rseg) = hub_x(inot) + cur_r * rote(1) rby(ring,rseg) = hub_y(inot) + cur_r * rote(2) rbz(ring,rseg) = hub_z(inot) + cur_r * rote(3) ! !-- !----------------------------------------------------------------------------------! !-- !-- Calculation of various angles and relative velocities --! !-- !----------------------------------------------------------------------------------! ! !-- In the following the 3D-velocity field is projected its components perpendicular !-- and parallel to the rotor area. !-- The calculation of forces will be done in the rotor-coordinates y' and z. !-- The yaw angle will be reintroduced when the force is applied on the hydrodynamic !-- equations. ! !-- Projection of the xy-velocities relative to the rotor area: ! !-- Velocity perpendicular to the rotor area: u_rot = u_int(inot,ring,rseg) * rotn(1) + v_int(inot,ring,rseg)*rotn(2) + & w_int(inot,ring,rseg)*rotn(3) ! !-- Projection of the 3D-velocity vector in the azimuthal direction: vtheta(rseg) = rota(1) * u_int(inot,ring,rseg) + rota(2) * v_int(inot,ring,rseg) + & rota(3) * w_int(inot,ring,rseg) ! !-- Determination of the angle phi_rel between the rotor plane and the direction of the !-- flow relative to the rotor: phi_rel(rseg) = ATAN2( u_rot , ( rotor_speed(inot) * cur_r - vtheta(rseg) ) ) ! !-- Interpolation of the local pitch angle from tabulated values to the current !-- radial position: lct = minloc( ABS( cur_r-lrd ) ) rad_d = cur_r-lrd(lct) IF ( cur_r == 0.0_wp ) THEN alpha_attack(rseg) = 0.0_wp ELSE IF ( cur_r >= lrd(size(ard)) ) THEN alpha_attack(rseg) = ( ard(size(ard) ) + ard(size(ard) -1 ) ) / 2.0_wp ELSE alpha_attack(rseg) = ( ard( lct(1) ) * ( ( lrd( lct(1) + 1 ) - cur_r ) / & ( lrd( lct(1) + 1 ) - lrd( lct(1) ) ) ) ) + & ( ard( lct(1) + 1 ) * ( ( cur_r - lrd( lct(1) ) ) / & ( lrd( lct(1) + 1 ) - lrd( lct(1) ) ) ) ) ENDIF ! !-- In Fortran radian instead of degree is used as unit for all angles. !-- Therefore, a transformation from angles given in degree to angles given in radian !-- is necessary here: alpha_attack(rseg) = alpha_attack(rseg) * ( ( 2.0_wp * pi ) / 360.0_wp ) ! !-- Substraction of the local pitch angle to obtain the local angle of attack: alpha_attack(rseg) = phi_rel(rseg) - alpha_attack(rseg) ! !-- Preliminary transformation back from angles given in radian to angles given in !-- degree: alpha_attack(rseg) = alpha_attack(rseg) * ( 360.0_wp / ( 2.0_wp * pi ) ) ! !-- Correct with collective pitch angle: alpha_attack(rseg) = alpha_attack(rseg) - pitch_angle(inot) ! !-- Determination of the magnitude of the flow velocity relative to the rotor: vrel(rseg) = SQRT( u_rot**2 + ( rotor_speed(inot) * cur_r - vtheta(rseg) )**2 ) ! !-- !----------------------------------------------------------------------------------! !-- !-- Interpolation of chord as well as lift and drag --! !-- !-- coefficients from tabulated values --! !-- !----------------------------------------------------------------------------------! ! !-- Interpolation of the chord_length from tabulated values to the current radial !-- position: IF ( cur_r == 0.0_wp ) THEN chord(rseg) = 0.0_wp ELSE IF ( cur_r >= lrd( size(crd) ) ) THEN chord(rseg) = ( crd( size(crd) ) + ard( size(crd) - 1 ) ) / 2.0_wp ELSE chord(rseg) = ( crd( lct(1) ) * ( ( lrd( lct(1) + 1 ) - cur_r ) / & ( lrd( lct(1) + 1 ) - lrd( lct(1) ) ) ) ) + ( crd( lct(1) + 1 ) & * ( ( cur_r - lrd( lct(1) ) ) / ( lrd( lct(1) + 1 ) - & lrd( lct(1) ) ) ) ) ENDIF ! !-- Determine index of current angle of attack, needed for finding the appropriate !-- interpolated values of the lift and drag coefficients !-- (-180.0 degrees = 1, +180.0 degrees = 3601, so one index every 0.1 degrees): iialpha = CEILING( ( alpha_attack(rseg) + 180.0_wp ) & * ( 1.0_wp / accu_cl_cd_tab ) ) + 1.0_wp ! !-- Determine index of current radial position, needed for finding the appropriate !-- interpolated values of the lift and drag coefficients (one index every 0.1 m): iir = CEILING( cur_r * 10.0_wp ) ! !-- Read in interpolated values of the lift and drag coefficients for the current !-- radial position and angle of attack: turb_cl(rseg) = turb_cl_tab(iialpha,iir) turb_cd(rseg) = turb_cd_tab(iialpha,iir) ! !-- Final transformation back from angles given in degree to angles given in radian: alpha_attack(rseg) = alpha_attack(rseg) * ( ( 2.0_wp * pi ) / 360.0_wp ) IF ( tip_loss_correction ) THEN ! !-- Tip loss correction following Schito. !-- Schito applies the tip loss correction only to the lift force. !-- Therefore, the tip loss correction is only applied to the lift coefficient and !-- not to the drag coefficient in our case. IF ( phi_rel(rseg) == 0.0_wp ) THEN tl_factor = 1.0_wp ELSE tl_factor = ( 2.0 / pi ) * & ACOS( EXP( -1.0 * ( 3.0 * ( rotor_radius(inot) - cur_r ) / & ( 2.0 * cur_r * ABS( SIN( phi_rel(rseg) ) ) ) ) ) ) ENDIF turb_cl(rseg) = tl_factor * turb_cl(rseg) ENDIF ! !-- !----------------------------------------------------------------------------------! !-- !-- Calculation of the forces --! !-- !----------------------------------------------------------------------------------! ! !-- Calculate the pre_factor for the thrust and torque forces: pre_factor = 0.5_wp * ( vrel(rseg)**2 ) * 3.0_wp * chord(rseg) * delta_r(inot) & / nsegs(ring,inot) ! !-- Calculate the thrust force (x-component of the total force) for each ring segment: thrust_seg(rseg) = pre_factor * ( turb_cl(rseg) * COS (phi_rel(rseg) ) + & turb_cd(rseg) * SIN( phi_rel(rseg) ) ) ! !-- Determination of the second of the additional forces acting on the flow in the !-- azimuthal direction: force vector as basis for torque (torque itself would be the !-- vector product of the radius vector and the force vector): torque_seg = pre_factor * ( turb_cl(rseg) * SIN (phi_rel(rseg) ) - & turb_cd(rseg) * COS( phi_rel(rseg) ) ) ! !-- Decomposition of the force vector into two parts: One acting along the !-- y-direction and one acting along the z-direction of the rotor coordinate system: torque_seg_y(rseg) = -torque_seg * sin_rot torque_seg_z(rseg) = torque_seg * cos_rot ! !-- Add the segment thrust to the thrust of the whole rotor: !$OMP CRITICAL thrust_rotor(inot) = thrust_rotor(inot) + thrust_seg(rseg) torque_total(inot) = torque_total(inot) + (torque_seg * cur_r) !$OMP END CRITICAL ENDDO !-- end of loop over ring segments ! !-- Restore the forces into arrays containing all the segments of each ring: thrust_ring(ring,:) = thrust_seg(:) torque_ring_y(ring,:) = torque_seg_y(:) torque_ring_z(ring,:) = torque_seg_z(:) ENDDO !-- end of loop over rings !$OMP END PARALLEL CALL cpu_log( log_point_s(62), 'wtm_controller', 'start' ) IF ( speed_control ) THEN ! !-- Calculation of the current generator speed for rotor speed control: ! !-- The acceleration of the rotor speed is calculated from the force balance of the !-- accelerating torque and the torque of the rotating rotor and generator: om_rate = ( torque_total(inot) * air_density * gear_efficiency - & gear_ratio * torque_gen_old(inot) ) / ( rotor_inertia + & gear_ratio * gear_ratio * generator_inertia ) * dt_3d ! !-- The generator speed is given by the product of gear gear_ratio and rotor speed: generator_speed(inot) = gear_ratio * ( rotor_speed(inot) + om_rate ) ENDIF IF ( pitch_control ) THEN ! !-- If the current generator speed is above rated, the pitch is not saturated and the !-- change from the last time step is within the maximum pitch rate, then the pitch loop !-- is repeated with a pitch gain: IF ( ( generator_speed(inot) > generator_speed_rated ) .AND. & ( pitch_angle(inot) < 25.0_wp ) .AND. & ( pitch_angle(inot) < pitch_angle_old(inot) + pitch_rate * dt_3d ) ) THEN pitch_sw = .TRUE. ! !-- Go back to beginning of pit_loop: CYCLE pit_loop ENDIF ! !-- The current pitch is saved for the next time step: pitch_angle_old(inot) = pitch_angle(inot) pitch_sw = .FALSE. ENDIF EXIT pit_loop ENDDO pit_loop ! Recursive pitch control loop ! !-- Call the rotor speed controller: IF ( speed_control ) THEN ! !-- Find processor at i_hub, j_hub: IF ( ( nxl <= i_hub(inot) ) .AND. ( nxr >= i_hub(inot) ) ) THEN IF ( ( nys <= j_hub(inot) ) .AND. ( nyn >= j_hub(inot) ) ) THEN CALL wtm_speed_control( inot ) ENDIF ENDIF ENDIF CALL cpu_log( log_point_s(62), 'wtm_controller', 'stop' ) CALL cpu_log( log_point_s(63), 'wtm_smearing', 'start' ) !-- !----------------------------------------------------------------------------------------! !-- !-- Regularization kernel --! !-- !-- Smearing of the forces and interpolation to cartesian grid --! !-- !----------------------------------------------------------------------------------------! ! !-- The aerodynamic blade forces need to be distributed smoothly on several mesh points in !-- order to avoid singular behaviour. ! !-- Summation over sum of weighted forces. The weighting factor (calculated in user_init) !-- includes information on the distance between the center of the grid cell and the rotor !-- segment under consideration. ! !-- To save computing time, apply smearing only for the relevant part of the model domain: ! !-- !-- Calculation of the boundaries: i_smear(inot) = CEILING( ( rotor_radius(inot) * ABS( roty(inot,1) ) + eps_min ) / dx ) j_smear(inot) = CEILING( ( rotor_radius(inot) * ABS( roty(inot,2) ) + eps_min ) / dy ) !$OMP PARALLEL PRIVATE (i, j, k, ring, rseg, flag, dist_u_3d, dist_v_3d, dist_w_3d) !$OMP DO DO i = MAX( nxl, i_hub(inot) - i_smear(inot) ), MIN( nxr, i_hub(inot) + i_smear(inot) ) DO j = MAX( nys, j_hub(inot) - j_smear(inot) ), MIN( nyn, j_hub(inot) + j_smear(inot) ) ! DO k = MAX( nzb_u_inner(j,i)+1, k_hub(inot) - k_smear(inot) ), & ! k_hub(inot) + k_smear(inot) DO k = nzb + 1, k_hub(inot) + k_smear(inot) DO ring = 1, nrings(inot) DO rseg = 1, nsegs(ring,inot) ! !-- Predetermine flag to mask topography: flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 1 ) ) ! !-- Determine the square of the distance between the current grid point and !-- each rotor area segment: dist_u_3d = ( i * dx - rbx(ring,rseg) )**2 + & ( j * dy + 0.5_wp * dy - rby(ring,rseg) )**2 + & ( k * dz(1) - 0.5_wp * dz(1) - rbz(ring,rseg) )**2 dist_v_3d = ( i * dx + 0.5_wp * dx - rbx(ring,rseg) )**2 + & ( j * dy - rby(ring,rseg) )**2 + & ( k * dz(1) - 0.5_wp * dz(1) - rbz(ring,rseg) )**2 dist_w_3d = ( i * dx + 0.5_wp * dx - rbx(ring,rseg) )**2 + & ( j * dy + 0.5_wp * dy - rby(ring,rseg) )**2 + & ( k * dz(1) - rbz(ring,rseg) )**2 ! !-- 3D-smearing of the forces with a polynomial function (much faster than !-- the old Gaussian function), using some parameters that have been !-- calculated in user_init. The function is only similar to Gaussian !-- function for squared distances <= eps_min2: IF ( dist_u_3d <= eps_min2 ) THEN thrust(k,j,i) = thrust(k,j,i) + thrust_ring(ring,rseg) * & ( ( pol_a * dist_u_3d - pol_b ) * & dist_u_3d + 1.0_wp ) * eps_factor * flag ENDIF IF ( dist_v_3d <= eps_min2 ) THEN torque_y(k,j,i) = torque_y(k,j,i) + torque_ring_y(ring,rseg) * & ( ( pol_a * dist_v_3d - pol_b ) * & dist_v_3d + 1.0_wp ) * eps_factor * flag ENDIF IF ( dist_w_3d <= eps_min2 ) THEN torque_z(k,j,i) = torque_z(k,j,i) + torque_ring_z(ring,rseg) * & ( ( pol_a * dist_w_3d - pol_b ) * & dist_w_3d + 1.0_wp ) * eps_factor * flag ENDIF ENDDO ! End of loop over rseg ENDDO ! End of loop over ring ! !-- Rotation of force components: rot_tend_x(k,j,i) = rot_tend_x(k,j,i) + ( thrust(k,j,i) * rotx(inot,1) + & torque_y(k,j,i) * roty(inot,1) + torque_z(k,j,i) * & rotz(inot,1) ) * flag rot_tend_y(k,j,i) = rot_tend_y(k,j,i) + ( thrust(k,j,i) * rotx(inot,2) + & torque_y(k,j,i) * roty(inot,2) + torque_z(k,j,i) * & rotz(inot,2) ) * flag rot_tend_z(k,j,i) = rot_tend_z(k,j,i) + ( thrust(k,j,i) * rotx(inot,3) + & torque_y(k,j,i) * roty(inot,3) + torque_z(k,j,i) * & rotz(inot,3) ) * flag ENDDO ! End of loop over k ENDDO ! End of loop over j ENDDO ! End of loop over i !$OMP END PARALLEL CALL cpu_log( log_point_s(63), 'wtm_smearing', 'stop' ) ENDDO !-- end of loop over turbines IF ( yaw_control ) THEN ! !-- Allocate arrays for yaw control at first call. Can't be allocated before dt_3d is set. IF ( start_up ) THEN wdlon= MAX( 1 , NINT( 30.0_wp / dt_3d ) ) ! 30s running mean array ALLOCATE( wd30(1:n_turbines,1:WDLON) ) wd30 = 999.0_wp ! Set to dummy value ALLOCATE( wd30_l(1:WDLON) ) wdsho = MAX( 1 , NINT( 2.0_wp / dt_3d ) ) ! 2s running mean array ALLOCATE( wd2(1:n_turbines,1:wdsho) ) wd2 = 999.0_wp ! Set to dummy value ALLOCATE( wd2_l(1:wdsho) ) start_up = .FALSE. ENDIF ! !-- Calculate the inflow wind speed: !-- !-- Loop over number of turbines: DO inot = 1, n_turbines ! !-- Find processor at i_hub, j_hub: IF ( ( nxl <= i_hub(inot) ) .AND. ( nxr >= i_hub(inot) ) ) THEN IF ( ( nys <= j_hub(inot) ) .AND. ( nyn >= j_hub(inot) ) ) THEN u_inflow_l(inot) = u(k_hub(inot),j_hub(inot),i_hub(inot)) wdir_l(inot) = -1.0_wp * ATAN2( 0.5_wp * & ( v(k_hub(inot), j_hub(inot), i_hub(inot) + 1) + & v(k_hub(inot), j_hub(inot), i_hub(inot)) ) , 0.5_wp * & ( u(k_hub(inot), j_hub(inot) + 1, i_hub(inot)) + & u(k_hub(inot), j_hub(inot), i_hub(inot)) ) ) CALL wtm_yawcontrol( inot ) yaw_angle_l(inot) = yaw_angle(inot) ENDIF ENDIF ENDDO ! end of loop over turbines ! !-- Transfer of information to the other cpus: #if defined( __parallel ) CALL MPI_ALLREDUCE( u_inflow_l, u_inflow, n_turbines, MPI_REAL, & MPI_SUM, comm2d, ierr ) CALL MPI_ALLREDUCE( wdir_l, wdir, n_turbines, MPI_REAL, MPI_SUM, & comm2d, ierr ) CALL MPI_ALLREDUCE( yaw_angle_l, yaw_angle, n_turbines, MPI_REAL, & MPI_SUM, comm2d, ierr ) #else u_inflow = u_inflow_l wdir = wdir_l yaw_angle = yaw_angle_l #endif DO inot = 1, n_turbines ! !-- Update rotor orientation: CALL wtm_rotate_rotor( inot ) ENDDO ! End of loop over turbines ENDIF ! end of yaw control IF ( speed_control ) THEN ! !-- Transfer of information to the other cpus: ! CALL MPI_ALLREDUCE( generator_speed, generator_speed_old, n_turbines, & ! MPI_REAL,MPI_SUM, comm2d, ierr ) #if defined( __parallel ) CALL MPI_ALLREDUCE( torque_gen, torque_gen_old, n_turbines, & MPI_REAL, MPI_SUM, comm2d, ierr ) CALL MPI_ALLREDUCE( rotor_speed_l, rotor_speed, n_turbines, & MPI_REAL, MPI_SUM, comm2d, ierr ) CALL MPI_ALLREDUCE( generator_speed_f, generator_speed_f_old, n_turbines, & MPI_REAL, MPI_SUM, comm2d, ierr ) #else torque_gen_old = torque_gen rotor_speed = rotor_speed_l generator_speed_f_old = generator_speed_f #endif ENDIF ENDIF CALL cpu_log( log_point_s(61), 'wtm_forces', 'stop' ) END SUBROUTINE wtm_forces !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> Yaw controller for the wind turbine model !--------------------------------------------------------------------------------------------------! SUBROUTINE wtm_yawcontrol( inot ) USE kinds IMPLICIT NONE INTEGER(iwp) :: inot INTEGER(iwp) :: i_wd_30 REAL(wp) :: missal i_wd_30 = 0_iwp ! !-- The yaw controller computes a 30s running mean of the wind direction. If the difference !-- between turbine alignment and wind direction exceeds 5 degrees, the turbine is yawed. The !-- mechanism stops as soon as the 2s-running mean of the missalignment is smaller than 0.5 !-- degrees. Attention: If the timestep during the simulation changes significantly the lengths !-- of the running means change and it does not correspond to 30s/2s anymore. !-- ! Needs to be modified for these situations ! !-- For wind from the east, the averaging of the wind direction could cause problems and the yaw !-- controller is probably flawed. -> Routine for averaging needs to be improved! ! !-- Check if turbine is not yawing: IF ( .NOT. doyaw(inot) ) THEN ! !-- Write current wind direction into array: wd30_l = wd30(inot,:) wd30_l = CSHIFT( wd30_l, SHIFT = -1 ) wd30_l(1) = wdir(inot) ! !-- Check if array is full ( no more dummies ): IF ( .NOT. ANY( wd30_l == 999.) ) THEN missal = SUM( wd30_l ) / SIZE( wd30_l ) - yaw_angle(inot) ! !-- Check if turbine is missaligned by more than yaw_misalignment_max: IF ( ABS( missal ) > yaw_misalignment_max ) THEN ! !-- Check in which direction to yaw: yawdir(inot) = SIGN( 1.0_wp, missal ) ! !-- Start yawing of turbine: yaw_angle(inot) = yaw_angle(inot) + yawdir(inot) * yaw_speed * dt_3d doyaw(inot) = .TRUE. wd30_l = 999. ! fill with dummies again ENDIF ENDIF wd30(inot,:) = wd30_l ! !-- If turbine is already yawing: !-- Initialize 2 s running mean and yaw until the missalignment is smaller than !-- yaw_misalignment_min ELSE ! !-- Initialize 2 s running mean: wd2_l = wd2(inot,:) wd2_l = CSHIFT( wd2_l, SHIFT = -1 ) wd2_l(1) = wdir(inot) ! !-- Check if array is full ( no more dummies ): IF ( .NOT. ANY( wd2_l == 999.0_wp ) ) THEN ! !-- Calculate missalignment of turbine: missal = SUM( wd2_l - yaw_angle(inot) ) / SIZE( wd2_l ) ! !-- Check if missalignment is still larger than 0.5 degree and if the yaw direction is !-- still right: IF ( ( ABS( missal ) > yaw_misalignment_min ) .AND. & ( yawdir(inot) == SIGN( 1.0_wp, missal ) ) ) THEN ! !-- Continue yawing: yaw_angle(inot) = yaw_angle(inot) + yawdir(inot) * yaw_speed * dt_3d ELSE ! !-- Stop yawing: doyaw(inot) = .FALSE. wd2_l = 999.0_wp ! fill with dummies again ENDIF ELSE ! !-- Continue yawing: yaw_angle(inot) = yaw_angle(inot) + yawdir(inot) * yaw_speed * dt_3d ENDIF wd2(inot,:) = wd2_l ENDIF END SUBROUTINE wtm_yawcontrol !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> Initialization of the speed control !--------------------------------------------------------------------------------------------------! SUBROUTINE wtm_init_speed_control IMPLICIT NONE ! !-- If speed control is set, remaining variables and control_parameters for the control algorithm !-- are calculated: ! !-- Calculate slope constant for region 15: slope15 = ( region_2_slope * region_2_min * region_2_min ) / & ( region_2_min - region_15_min ) ! !-- Calculate upper limit of slipage region: vs_sysp = generator_speed_rated / 1.1_wp ! !-- Calculate slope of slipage region: region_25_slope = ( generator_power_rated / generator_speed_rated ) / & ( generator_speed_rated - vs_sysp ) ! !-- Calculate lower limit of slipage region: region_25_min = ( region_25_slope - SQRT( region_25_slope * & ( region_25_slope - 4.0_wp * region_2_slope * vs_sysp ) ) ) / & ( 2.0_wp * region_2_slope ) ! !-- Frequency for the simple low pass filter: fcorner = 0.25_wp ! !-- At the first timestep the torque is set to its maximum to prevent an overspeeding of the rotor: IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN torque_gen_old(:) = generator_torque_max ENDIF END SUBROUTINE wtm_init_speed_control !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> Simple controller for the regulation of the rotor speed !--------------------------------------------------------------------------------------------------! SUBROUTINE wtm_speed_control( inot ) IMPLICIT NONE INTEGER(iwp):: inot ! !-- The controller is based on the fortran script from Jonkman et al. 2009 "Definition of a 5 MW !-- Reference Wind Turbine for offshore system developement" ! !-- The generator speed is filtered by a low pass filter for the control of the generator torque: lp_coeff = EXP( -2.0_wp * 3.14_wp * dt_3d * fcorner) generator_speed_f(inot) = ( 1.0_wp - lp_coeff ) * generator_speed(inot) + lp_coeff * & generator_speed_f_old(inot) IF ( generator_speed_f(inot) <= region_15_min ) THEN ! !-- Region 1: Generator torque is set to zero to accelerate the rotor: torque_gen(inot) = 0 ELSEIF ( generator_speed_f(inot) <= region_2_min ) THEN ! !-- Region 1.5: Generator torque is increasing linearly with rotor speed: torque_gen(inot) = slope15 * ( generator_speed_f(inot) - region_15_min ) ELSEIF ( generator_speed_f(inot) <= region_25_min ) THEN ! !-- Region 2: Generator torque is increased by the square of the generator speed to keep the !-- TSR optimal: torque_gen(inot) = region_2_slope * generator_speed_f(inot) * generator_speed_f(inot) ELSEIF ( generator_speed_f(inot) < generator_speed_rated ) THEN ! !-- Region 2.5: Slipage region between 2 and 3: torque_gen(inot) = region_25_slope * ( generator_speed_f(inot) - vs_sysp ) ELSE ! !-- Region 3: Generator torque is antiproportional to the rotor speed to keep the power !-- constant: torque_gen(inot) = generator_power_rated / generator_speed_f(inot) ENDIF ! !-- Calculate torque rate and confine with a max: trq_rate = ( torque_gen(inot) - torque_gen_old(inot) ) / dt_3d trq_rate = MIN( MAX( trq_rate, -1.0_wp * generator_torque_rate_max ), generator_torque_rate_max ) ! !-- Calculate new gen torque and confine with max torque: torque_gen(inot) = torque_gen_old(inot) + trq_rate * dt_3d torque_gen(inot) = MIN( torque_gen(inot), generator_torque_max ) ! !-- Overwrite values for next timestep: rotor_speed_l(inot) = generator_speed(inot) / gear_ratio END SUBROUTINE wtm_speed_control !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> Application of the additional forces generated by the wind turbine on the flow components !> (tendency terms) !> Call for all grid points !--------------------------------------------------------------------------------------------------! SUBROUTINE wtm_actions( location ) CHARACTER(LEN=*) :: location !< INTEGER(iwp) :: i !< running index INTEGER(iwp) :: j !< running index INTEGER(iwp) :: k !< running index SELECT CASE ( location ) CASE ( 'before_timestep' ) CALL wtm_forces CASE ( 'u-tendency' ) ! !-- Apply the x-component of the force to the u-component of the flow: IF ( time_since_reference_point >= time_turbine_on ) THEN DO i = nxlg, nxrg DO j = nysg, nyng DO k = nzb + 1, MAXVAL( k_hub ) + MAXVAL( k_smear ) ! !-- Calculate the thrust generated by the nacelle and the tower: tend_nac_x = 0.5_wp * nac_cd_surf(k,j,i) * SIGN( u(k,j,i)**2 , u(k,j,i) ) tend_tow_x = 0.5_wp * tow_cd_surf(k,j,i) * SIGN( u(k,j,i)**2 , u(k,j,i) ) tend(k,j,i) = tend(k,j,i) + ( - rot_tend_x(k,j,i) - tend_nac_x - tend_tow_x ) * & MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 1 ) ) ENDDO ENDDO ENDDO ENDIF CASE ( 'v-tendency' ) ! !-- Apply the y-component of the force to the v-component of the flow: IF ( time_since_reference_point >= time_turbine_on ) THEN DO i = nxlg, nxrg DO j = nysg, nyng DO k = nzb+1, MAXVAL(k_hub) + MAXVAL(k_smear) tend_nac_y = 0.5_wp * nac_cd_surf(k,j,i) * SIGN( v(k,j,i)**2 , v(k,j,i) ) tend_tow_y = 0.5_wp * tow_cd_surf(k,j,i) * SIGN( v(k,j,i)**2 , v(k,j,i) ) tend(k,j,i) = tend(k,j,i) + ( - rot_tend_y(k,j,i) - tend_nac_y - tend_tow_y ) * & MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 2 ) ) ENDDO ENDDO ENDDO ENDIF CASE ( 'w-tendency' ) ! !-- Apply the z-component of the force to the w-component of the flow: IF ( time_since_reference_point >= time_turbine_on ) THEN DO i = nxlg, nxrg DO j = nysg, nyng DO k = nzb+1, MAXVAL(k_hub) + MAXVAL(k_smear) tend(k,j,i) = tend(k,j,i) - rot_tend_z(k,j,i) * & MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 3 ) ) ENDDO ENDDO ENDDO ENDIF CASE DEFAULT CONTINUE END SELECT END SUBROUTINE wtm_actions !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> Application of the additional forces generated by the wind turbine on the flow components !> (tendency terms) !> Call for grid point i,j !--------------------------------------------------------------------------------------------------! SUBROUTINE wtm_actions_ij( i, j, location ) CHARACTER (LEN=*) :: location !< INTEGER(iwp) :: i !< running index INTEGER(iwp) :: j !< running index INTEGER(iwp) :: k !< running index SELECT CASE ( location ) CASE ( 'before_timestep' ) CALL wtm_forces CASE ( 'u-tendency' ) ! !-- Apply the x-component of the force to the u-component of the flow: IF ( time_since_reference_point >= time_turbine_on ) THEN DO k = nzb+1, MAXVAL(k_hub) + MAXVAL(k_smear) ! !-- Calculate the thrust generated by the nacelle and the tower: tend_nac_x = 0.5_wp * nac_cd_surf(k,j,i) * SIGN( u(k,j,i)**2 , u(k,j,i) ) tend_tow_x = 0.5_wp * tow_cd_surf(k,j,i) * SIGN( u(k,j,i)**2 , u(k,j,i) ) tend(k,j,i) = tend(k,j,i) + ( - rot_tend_x(k,j,i) - tend_nac_x - tend_tow_x ) * & MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 1 ) ) ENDDO ENDIF CASE ( 'v-tendency' ) ! !-- Apply the y-component of the force to the v-component of the flow: IF ( time_since_reference_point >= time_turbine_on ) THEN DO k = nzb+1, MAXVAL(k_hub) + MAXVAL(k_smear) tend_nac_y = 0.5_wp * nac_cd_surf(k,j,i) * SIGN( v(k,j,i)**2 , v(k,j,i) ) tend_tow_y = 0.5_wp * tow_cd_surf(k,j,i) * SIGN( v(k,j,i)**2 , v(k,j,i) ) tend(k,j,i) = tend(k,j,i) + ( - rot_tend_y(k,j,i) - tend_nac_y - tend_tow_y ) * & MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 2 ) ) ENDDO ENDIF CASE ( 'w-tendency' ) ! !-- Apply the z-component of the force to the w-component of the flow: IF ( time_since_reference_point >= time_turbine_on ) THEN DO k = nzb+1, MAXVAL(k_hub) + MAXVAL(k_smear) tend(k,j,i) = tend(k,j,i) - rot_tend_z(k,j,i) * & MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 3 ) ) ENDDO ENDIF CASE DEFAULT CONTINUE END SELECT END SUBROUTINE wtm_actions_ij SUBROUTINE wtm_data_output INTEGER(iwp) :: return_value !< returned status value of called function INTEGER(iwp) :: t_ind = 0 !< time index IF ( myid == 0 ) THEN ! !-- At the first call of this routine write the spatial coordinates: IF ( .NOT. initial_write_coordinates ) THEN ALLOCATE ( output_values_1d_target(1:n_turbines) ) output_values_1d_target = hub_x(1:n_turbines) output_values_1d_pointer => output_values_1d_target return_value = dom_write_var( nc_filename, & 'x', & values_realwp_1d = output_values_1d_pointer, & bounds_start = (/1/), & bounds_end = (/n_turbines/) ) output_values_1d_target = hub_y(1:n_turbines) output_values_1d_pointer => output_values_1d_target return_value = dom_write_var( nc_filename, & 'y', & values_realwp_1d = output_values_1d_pointer, & bounds_start = (/1/), & bounds_end = (/n_turbines/) ) output_values_1d_target = hub_z(1:n_turbines) output_values_1d_pointer => output_values_1d_target return_value = dom_write_var( nc_filename, & 'z', & values_realwp_1d = output_values_1d_pointer, & bounds_start = (/1/), & bounds_end = (/n_turbines/) ) output_values_1d_target = rotor_radius(1:n_turbines) * 2.0_wp output_values_1d_pointer => output_values_1d_target return_value = dom_write_var( nc_filename, & 'rotor_diameter', & values_realwp_1d = output_values_1d_pointer, & bounds_start = (/1/), & bounds_end = (/n_turbines/) ) output_values_1d_target = tower_diameter(1:n_turbines) output_values_1d_pointer => output_values_1d_target return_value = dom_write_var( nc_filename, & 'tower_diameter', & values_realwp_1d = output_values_1d_pointer, & bounds_start = (/1/), & bounds_end = (/n_turbines/) ) initial_write_coordinates = .TRUE. DEALLOCATE ( output_values_1d_target ) ENDIF t_ind = t_ind + 1 ALLOCATE ( output_values_1d_target(1:n_turbines) ) output_values_1d_target = rotor_speed(:) output_values_1d_pointer => output_values_1d_target return_value = dom_write_var( nc_filename, & 'rotor_speed', & values_realwp_1d = output_values_1d_pointer, & bounds_start = (/1, t_ind/), & bounds_end = (/n_turbines, t_ind /) ) output_values_1d_target = generator_speed(:) output_values_1d_pointer => output_values_1d_target return_value = dom_write_var( nc_filename, & 'generator_speed', & values_realwp_1d = output_values_1d_pointer, & bounds_start = (/1, t_ind/), & bounds_end = (/n_turbines, t_ind /) ) output_values_1d_target = torque_gen_old(:) output_values_1d_pointer => output_values_1d_target return_value = dom_write_var( nc_filename, & 'generator_torque', & values_realwp_1d = output_values_1d_pointer, & bounds_start = (/1, t_ind/), & bounds_end = (/n_turbines, t_ind /) ) output_values_1d_target = torque_total(:) output_values_1d_pointer => output_values_1d_target return_value = dom_write_var( nc_filename, & 'rotor_torque', & values_realwp_1d = output_values_1d_pointer, & bounds_start = (/1, t_ind/), & bounds_end = (/n_turbines, t_ind /) ) output_values_1d_target = pitch_angle(:) output_values_1d_pointer => output_values_1d_target return_value = dom_write_var( nc_filename, & 'pitch_angle', & values_realwp_1d = output_values_1d_pointer, & bounds_start = (/1, t_ind/), & bounds_end = (/n_turbines, t_ind /) ) output_values_1d_target = torque_gen_old(:) * generator_speed(:) * generator_efficiency output_values_1d_pointer => output_values_1d_target return_value = dom_write_var( nc_filename, & 'generator_power', & values_realwp_1d = output_values_1d_pointer, & bounds_start = (/1, t_ind/), & bounds_end = (/n_turbines, t_ind /) ) DO inot = 1, n_turbines output_values_1d_target(inot) = torque_total(inot) * rotor_speed(inot) * air_density ENDDO output_values_1d_pointer => output_values_1d_target return_value = dom_write_var( nc_filename, & 'rotor_power', & values_realwp_1d = output_values_1d_pointer, & bounds_start = (/1, t_ind/), & bounds_end = (/n_turbines, t_ind /) ) output_values_1d_target = thrust_rotor(:) output_values_1d_pointer => output_values_1d_target return_value = dom_write_var( nc_filename, & 'rotor_thrust', & values_realwp_1d = output_values_1d_pointer, & bounds_start = (/1, t_ind/), & bounds_end = (/n_turbines, t_ind /) ) output_values_1d_target = wdir(:)*180.0_wp/pi output_values_1d_pointer => output_values_1d_target return_value = dom_write_var( nc_filename, & 'wind_direction', & values_realwp_1d = output_values_1d_pointer, & bounds_start = (/1, t_ind/), & bounds_end = (/n_turbines, t_ind /) ) output_values_1d_target = (yaw_angle(:)) * 180.0_wp / pi output_values_1d_pointer => output_values_1d_target return_value = dom_write_var( nc_filename, & 'yaw_angle', & values_realwp_1d = output_values_1d_pointer, & bounds_start = (/1, t_ind/), & bounds_end = (/n_turbines, t_ind /) ) output_values_0d_target = time_since_reference_point output_values_0d_pointer => output_values_0d_target return_value = dom_write_var( nc_filename, & 'time', & values_realwp_0d = output_values_0d_pointer, & bounds_start = (/t_ind/), & bounds_end = (/t_ind/) ) DEALLOCATE ( output_values_1d_target ) ENDIF END SUBROUTINE wtm_data_output END MODULE wind_turbine_model_mod