source: palm/trunk/SOURCE/user_init_grid.f90

Last change on this file was 4828, checked in by Giersch, 3 years ago

Copyright updated to year 2021, interface pmc_sort removed to accelarate the nesting code

  • Property svn:keywords set to Id
File size: 4.0 KB
RevLine 
[1682]1!> @file user_init_grid.f90
[4498]2!--------------------------------------------------------------------------------------------------!
[2696]3! This file is part of the PALM model system.
[1036]4!
[4498]5! PALM is free software: you can redistribute it and/or modify it under the terms of the GNU General
6! Public License as published by the Free Software Foundation, either version 3 of the License, or
7! (at your option) any later version.
[1036]8!
[4498]9! PALM is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the
10! implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
11! Public License for more details.
[1036]12!
[4498]13! You should have received a copy of the GNU General Public License along with PALM. If not, see
14! <http://www.gnu.org/licenses/>.
[1036]15!
[4828]16! Copyright 1997-2021 Leibniz Universitaet Hannover
[4498]17!--------------------------------------------------------------------------------------------------!
[1036]18!
[4498]19!
[258]20! Current revisions:
[211]21! -----------------
[1683]22!
[2233]23!
[1321]24! Former revisions:
25! -----------------
26! $Id: user_init_grid.f90 4828 2021-01-05 11:21:41Z banzhafs $
[4498]27! file re-formatted to follow the PALM coding standard
28!
29!
30! 4360 2020-01-07 11:25:50Z suehring
[4182]31! Corrected "Former revisions" section
[4498]32!
[4182]33! 3768 2019-02-27 14:35:58Z raasch
[3768]34! variables commented + statement added to avoid compiler warnings about unused variables
[4498]35!
[3768]36! 3655 2019-01-07 16:51:22Z knoop
[3065]37! dz was replaced by dz(1)
[1321]38!
[4182]39! 217 2008-12-09 18:00:48Z letzel
40! +topography_grid_convention
41! Former file user_interface.f90 split into one file per subroutine
42!
[211]43! Description:
44! ------------
[1682]45!> Execution of user-defined grid initializing actions
[4498]46!--------------------------------------------------------------------------------------------------!
[2232]47 SUBROUTINE user_init_grid( topo_3d )
[211]48
[4498]49
[211]50    USE control_parameters
[4498]51
[211]52    USE indices
[4498]53
[1320]54    USE kinds
[4498]55
[211]56    USE user
57
58    IMPLICIT NONE
59
[4498]60!    INTEGER(iwp)                                           ::  k_topo   !< topography top index
61    INTEGER(iwp), DIMENSION(nzb:nzt+1,nysg:nyng,nxlg:nxrg) ::  topo_3d  !< 3D topography field
[211]62
[3768]63!    REAL(wp) ::  h_topo !< user-defined topography height
[2232]64
[211]65!
[3768]66!-- Next line is to avoid compiler warning about unused variables. Please remove.
67    IF ( topo_3d(nzb,nysg,nxlg) == 0 )  CONTINUE
68
69
70!
[211]71!-- Here the user-defined grid initializing actions follow:
72
73!
74!-- Set the index array nzb_local for non-flat topography.
75!-- Here consistency checks concerning domain size and periodicity are necessary
76    SELECT CASE ( TRIM( topography ) )
77
[2232]78       CASE ( 'flat', 'single_building', 'single_street_canyon', 'tunnel' )
[211]79!
80!--       Not allowed here since these are the standard cases used in init_grid.
81
82       CASE ( 'user_defined_topography_1' )
83!
[4498]84!--       Here the user can define their own topography.
[217]85!--       After definition, please remove the following three lines!
[258]86          message_string = 'topography "' // topography // '" not available yet'
87          CALL message( 'user_init_grid', 'UI0005', 1, 2, 0, 6, 0 )
[2232]88!
[4498]89!--       The user is allowed to set surface-mounted as well as non-surface mounted topography
90!--       (e.g. overhanging structures). For both, use 3D array topo_3d and set bit 0. The
91!--       convention is: bit is zero inside topography, bit is 1 for atmospheric grid point.
92!--       The following example shows how to prescribe sine-like topography along x-direction with
93!--       amplitude of 10 * dz(1) and wavelength 10 * dy.
[2232]94!           DO  i = nxlg, nxrg
[4498]95!              h_topo = 10.0_wp * dz(1) * ( SIN( 3.14_wp * 0.5_wp) * i * dx / ( 5.0_wp * dy ) )**2
96!
[2232]97!              k_topo = MINLOC( ABS( zw - h_topo ), 1 ) - 1
[4498]98!
99!              topo_3d(k_topo+1:nzt+1,:,i) = IBSET( topo_3d(k_topo+1:nzt+1,:,i), 0 )
100!           ENDDO
101!
[2696]102!           CALL exchange_horiz_int( topo_3d, nys, nyn, nxl, nxr, nzt, nbgp )
[211]103
104       CASE DEFAULT
105!
[4498]106!--       The DEFAULT case is reached if the parameter topography contains a wrong character string
107!--       that is neither recognized in init_grid nor here in user_init_grid.
[258]108          message_string = 'unknown topography "' // topography // '"'
109          CALL message( 'user_init_grid', 'UI0006', 1, 2, 0, 6, 0 )
[211]110
111    END SELECT
112
113 END SUBROUTINE user_init_grid
114
Note: See TracBrowser for help on using the repository browser.