source: palm/trunk/SOURCE/user_actions.f90 @ 550

Last change on this file since 550 was 392, checked in by raasch, 14 years ago

New:
---

Adapted for machine lck
(mrun, mbuild, subjob)

bc_lr/bc_ns in most subroutines replaced by LOGICAL variables bc_lr_cyc,
bc_ns_cyc for speed optimization
(check_parameters, diffusion_u, diffusion_v, diffusion_w, modules)

Additional timestep criterion in case of simulations with plant canopy (timestep)

Check for illegal entries in section_xy|xz|yz that exceed nz+1|ny+1|nx+1
(check_parameters)

Clipping of dvrp output implemented. Default colourtable for particles
implemented, particle attributes (color, dvrp_size) can be set with new
parameters particle_color, particle_dvrpsize, color_interval,
dvrpsize_interval (init_dvrp, data_output_dvrp, modules, user_data_output_dvrp).
Slicer attributes (dvrp) are set with new routine set_slicer_attributes_dvrp
and are controlled with existing parameters slicer_range_limits.
(set_slicer_attributes_dvrp)

Ocean atmosphere coupling allows to use independent precursor runs in order
to account for different spin-up times. The time when coupling has to be
started is given by new inipar parameter coupling_start_time. The precursor
ocean run has to be started using new mrun option "-y" in order to add
appendix "_O" to all output files.
(check_for_restart, check_parameters, data_output_2d, data_output_3d,
data_output_profiles, data_output_ptseries, data_output_spectra,
data_output_tseries, header, init_coupling, modules, mrun,
parin, read_var_list, surface_coupler, time_integration, write_var_list)

Polygon reduction for topography and ground plate isosurface. Reduction level
for buildings can be chosen with parameter cluster_size. (init_dvrp)

External pressure gradient (check_parameters, header, init_3d_model, modules,
parin, prognostic_equations, read_var_list, write_var_list)

New topography case 'single_street_canyon' (header, init_grid, modules, parin,
read_var_list, user_check_parameters, user_header, user_init_grid, write_var_list)

Option to predefine a target bulk velocity for conserve_volume_flow
(check_parameters, header, init_3d_model, modules, parin, read_var_list,
write_var_list)

Option for user defined 2D data output in xy cross sections at z=nzb+1
(data_output_2d, user_data_output_2d)

xy cross section output of surface heatfluxes (latent, sensible)
(average_3d_data, check_parameters, data_output_2d, modules, read_3d_binary,
sum_up_3d_data, write_3d_binary)

average_3d_data, check_for_restart, check_parameters, data_output_2d, data_output_3d, data_output_dvrp, data_output_profiles, data_output_ptseries, data_output_spectra, data_output_tseries, init_coupling, init_dvrp, init_grid, init_3d_model, header, mbuild, modules, mrun, package_parin, parin, prognostic_equations, read_3d_binary, read_var_list, subjob, surface_coupler, timestep, time_integration, user_check_parameters, user_data_output_2d, user_data_output_dvrp, user_header, user_init_grid, write_3d_binary, write_var_list

New: set_particle_attributes, set_slicer_attributes_dvrp

Changed:


lcmuk changed to lc to avoid problems with Intel compiler on sgi-ice
(poisfft)

For extended NetCDF files, the updated title attribute includes an update of
time_average_text where appropriate. (netcdf)

In case of restart runs without extension, initial profiles are not written
to NetCDF-file anymore. (data_output_profiles, modules, read_var_list, write_var_list)

Small change in formatting of the message handling routine concering the output in the
job protocoll. (message)

initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill', now
independent of turbulent_inflow (check_parameters, header, init_3d_model)

2 NetCDF error numbers changed. (data_output_3d)

A Link to the website appendix_a.html is printed for further information
about the possible errors. (message)

Temperature gradient criterion for estimating the boundary layer height
replaced by the gradient criterion of Sullivan et al. (1998). (flow_statistics)

NetCDF unit attribute in timeseries output in case of statistic regions added
(netcdf)

Output of NetCDF messages with aid of message handling routine.
(check_open, close_file, data_output_2d, data_output_3d,
data_output_profiles, data_output_ptseries, data_output_spectra,
data_output_tseries, netcdf, output_particles_netcdf)

Output of messages replaced by message handling routine.
(advec_particles, advec_s_bc, buoyancy, calc_spectra, check_for_restart,
check_open, coriolis, cpu_log, data_output_2d, data_output_3d, data_output_dvrp,
data_output_profiles, data_output_spectra, fft_xy, flow_statistics, header,
init_1d_model, init_3d_model, init_dvrp, init_grid, init_particles, init_pegrid,
netcdf, parin, plant_canopy_model, poisfft_hybrid, poismg, read_3d_binary,
read_var_list, surface_coupler, temperton_fft, timestep, user_actions,
user_data_output_dvrp, user_dvrp_coltab, user_init_grid, user_init_plant_canopy,
user_parin, user_read_restart_data, user_spectra )

Maximum number of tails is calculated from maximum number of particles and
skip_particles_for_tail (init_particles)

Value of vertical_particle_advection may differ for each particle group
(advec_particles, header, modules)

First constant in array den also defined as type double. (eqn_state_seawater)

Parameter dvrp_psize moved from particles_par to dvrp_graphics_par. (package_parin)

topography_grid_convention moved from userpar to inipar (check_parameters,
header, parin, read_var_list, user_check_parameters, user_header,
user_init_grid, user_parin, write_var_list)

Default value of grid_matching changed to strict.

Adjustments for runs on lcxt4 (necessary due to an software update on CRAY) and
for coupled runs on ibmy (mrun, subjob)

advec_particles, advec_s_bc, buoyancy, calc_spectra, check_for_restart, check_open, check_parameters, close_file, coriolis, cpu_log, data_output_2d, data_output_3d, data_output_dvrp, data_output_profiles, data_output_ptseries, data_output_spectra, data_output_tseries, eqn_state_seawater, fft_xy, flow_statistics, header, init_1d_model, init_3d_model, init_dvrp, init_grid, init_particles, init_pegrid, message, mrun, netcdf, output_particles_netcdf, package_parin, parin, plant_canopy_model, poisfft, poisfft_hybrid, poismg, read_3d_binary, read_var_list, sort_particles, subjob, user_check_parameters, user_header, user_init_grid, user_parin, surface_coupler, temperton_fft, timestep, user_actions, user_data_output_dvrp, user_dvrp_coltab, user_init_grid, user_init_plant_canopy, user_parin, user_read_restart_data, user_spectra, write_var_list

Errors:


Bugfix: Initial hydrostatic pressure profile in case of ocean runs is now
calculated in 5 iteration steps. (init_ocean)

Bugfix: wrong sign in buoyancy production of ocean part in case of not using
the reference density (only in 3D routine production_e) (production_e)

Bugfix: output of averaged 2d/3d quantities requires that an avaraging
interval has been set, respective error message is included (check_parameters)

Bugfix: Output on unit 14 only if requested by write_binary.
(user_last_actions)

Bugfix to avoid zero division by km_neutral (production_e)

Bugfix for extended NetCDF files: In order to avoid 'data mode' errors if
updated attributes are larger than their original size, NF90_PUT_ATT is called
in 'define mode' enclosed by NF90_REDEF and NF90_ENDDEF calls. This implies a
possible performance loss; an alternative strategy would be to ensure equal
attribute size in a job chain. (netcdf)

Bugfix: correction of initial volume flow for non-flat topography (init_3d_model)
Bugfix: zero initialization of arrays within buildings for 'cyclic_fill' (init_3d_model)

Bugfix: to_be_resorted => s_av for time-averaged scalars (data_output_2d, data_output_3d)

Bugfix: error in formatting the output (message)

Bugfix: avoid that ngp_2dh_s_inner becomes zero (init_3_model)

Typographical error: unit of wpt in dots_unit (modules)

Bugfix: error in check, if particles moved further than one subdomain length.
This check must not be applied for newly released particles. (advec_particles)

Bugfix: several tail counters are initialized, particle_tail_coordinates is
only written to file if its third index is > 0, arrays for tails are allocated
with a minimum size of 10 tails if there is no tail initially (init_particles,
advec_particles)

Bugfix: pressure included for profile output (check_parameters)

Bugfix: Type of count and count_rate changed to default INTEGER on NEC machines
(cpu_log)

Bugfix: output if particle time series only if particle advection is switched
on. (time_integration)

Bugfix: qsws was calculated in case of constant heatflux = .FALSE. (prandtl_fluxes)

Bugfix: averaging along z is not allowed for 2d quantities (e.g. u* and z0) (data_output_2d)

Typographical errors (netcdf)

If the inversion height calculated by the prerun is zero, inflow_damping_height
must be explicitly specified (init_3d_model)

Small bugfix concerning 3d 64bit netcdf output format (header)

Bugfix: dt_fixed removed from the restart file, because otherwise, no change
from a fixed to a variable timestep would be possible in restart runs.
(read_var_list, write_var_list)

Bugfix: initial setting of time_coupling in coupled restart runs (time_integration)

advec_particles, check_parameters, cpu_log, data_output_2d, data_output_3d, header, init_3d_model, init_particles, init_ocean, modules, netcdf, prandtl_fluxes, production_e, read_var_list, time_integration, user_last_actions, write_var_list

  • Property svn:keywords set to Id
File size: 4.4 KB
Line 
1 MODULE user_actions_mod
2
3!------------------------------------------------------------------------------!
4! Current revisions:
5! -----------------
6!
7!
8! Former revisions:
9! -----------------
10! $Id: user_actions.f90 392 2009-09-24 10:39:14Z maronga $
11!
12! 258 2009-03-13 12:36:03Z heinze
13! Output of messages replaced by message handling routine.
14!
15! 211 2008-11-11 04:46:24Z raasch
16! Former file user_interface.f90 split into one file per subroutine
17!
18! Description:
19! ------------
20! Execution of user-defined actions before or after single timesteps
21!------------------------------------------------------------------------------!
22
23    PRIVATE
24    PUBLIC user_actions
25
26    INTERFACE user_actions
27       MODULE PROCEDURE user_actions
28       MODULE PROCEDURE user_actions_ij
29    END INTERFACE user_actions
30
31 CONTAINS
32
33
34!------------------------------------------------------------------------------!
35! Call for all grid points
36!------------------------------------------------------------------------------!
37    SUBROUTINE user_actions( location )
38
39       USE control_parameters
40       USE cpulog
41       USE indices
42       USE interfaces
43       USE pegrid
44       USE user
45       USE arrays_3d
46
47       IMPLICIT NONE
48
49       CHARACTER (LEN=*) ::  location
50
51       INTEGER ::  i, j, k
52
53       CALL cpu_log( log_point(24), 'user_actions', 'start' )
54
55!
56!--    Here the user-defined actions follow
57!--    No calls for single grid points are allowed at locations before and
58!--    after the timestep, since these calls are not within an i,j-loop
59       SELECT CASE ( location )
60
61          CASE ( 'before_timestep' )
62!
63!--          Enter actions to be done before every timestep here
64
65
66          CASE ( 'after_integration' )
67!
68!--          Enter actions to be done after every time integration (before
69!--          data output)
70!--          Sample for user-defined output:
71!             DO  i = nxl-1, nxr+1
72!                DO  j = nys-1, nyn+1
73!                   DO  k = nzb, nzt+1
74!                      u2(k,j,i) = u(k,j,i)**2
75!                   ENDDO
76!                ENDDO
77!             ENDDO
78!             DO  i = nxl-1, nxr
79!                DO  j = nys-1, nyn
80!                   DO  k = nzb, nzt+1
81!                      ustvst(k,j,i) =  &
82!                         ( 0.5 * ( u(k,j,i) + u(k,j,i+1) ) - hom(k,1,1,0) ) * &
83!                         ( 0.5 * ( v(k,j,i) + v(k,j+1,i) ) - hom(k,1,2,0) )
84!                   ENDDO
85!                ENDDO
86!             ENDDO
87
88
89          CASE ( 'after_timestep' )
90!
91!--          Enter actions to be done after every timestep here
92
93
94          CASE ( 'u-tendency' )
95!
96!--          Enter actions to be done in the u-tendency term here
97
98
99          CASE ( 'v-tendency' )
100
101
102          CASE ( 'w-tendency' )
103
104
105          CASE ( 'pt-tendency' )
106
107
108          CASE ( 'sa-tendency' )
109
110
111          CASE ( 'e-tendency' )
112
113
114          CASE ( 'q-tendency' )
115
116
117          CASE DEFAULT
118             message_string = 'unknown location "' // location // '"'
119             CALL message( 'user_actions', 'UI0001', 1, 2, 0, 6, 0 )
120
121       END SELECT
122
123       CALL cpu_log( log_point(24), 'user_actions', 'stop' )
124
125    END SUBROUTINE user_actions
126
127
128!------------------------------------------------------------------------------!
129! Call for grid point i,j
130!------------------------------------------------------------------------------!
131    SUBROUTINE user_actions_ij( i, j, location )
132
133       USE control_parameters
134       USE pegrid
135       USE user
136
137       IMPLICIT NONE
138
139       CHARACTER (LEN=*) ::  location
140
141       INTEGER ::  i, idum, j
142
143
144!
145!--    Here the user-defined actions follow
146       SELECT CASE ( location )
147
148          CASE ( 'u-tendency' )
149!
150!--          Enter actions to be done in the u-tendency term here
151
152
153          CASE ( 'v-tendency' )
154
155
156          CASE ( 'w-tendency' )
157
158
159          CASE ( 'pt-tendency' )
160
161
162          CASE ( 'sa-tendency' )
163
164
165          CASE ( 'e-tendency' )
166
167
168          CASE ( 'q-tendency' )
169
170
171          CASE ( 'before_timestep', 'after_integration', 'after_timestep' )
172             message_string = 'location "' // location // '" is not ' // &
173                             'allowed to be called with parameters "i" and "j"'
174             CALL message( 'user_actions', 'UI0002', 1, 2, 0, 6, 0 )
175
176
177          CASE DEFAULT
178             message_string = 'unknown location "' // location // '"'
179             CALL message( 'user_actions', 'UI0001', 1, 2, 0, 6, 0 )
180             
181
182       END SELECT
183
184    END SUBROUTINE user_actions_ij
185
186 END MODULE user_actions_mod
Note: See TracBrowser for help on using the repository browser.