source: palm/trunk/SOURCE/timestep.f90 @ 1017

Last change on this file since 1017 was 1002, checked in by raasch, 12 years ago

last commit documented

  • Property svn:keywords set to Id
File size: 13.6 KB
Line 
1 SUBROUTINE timestep
2
3!------------------------------------------------------------------------------!
4! Current revisions:
5! ------------------
6!
7!
8! Former revisions:
9! -----------------
10! $Id: timestep.f90 1002 2012-09-13 15:12:24Z raasch $
11!
12! 1001 2012-09-13 14:08:46Z raasch
13! all actions concerning leapfrog scheme removed
14!
15! 978 2012-08-09 08:28:32Z fricke
16! restriction of the outflow damping layer in the diffusion criterion removed
17!
18! 866 2012-03-28 06:44:41Z raasch
19! bugfix for timestep calculation in case of Galilei transformation,
20! special treatment in case of mirror velocity boundary condition removed
21!
22! 707 2011-03-29 11:39:40Z raasch
23! bc_lr/ns replaced by bc_lr/ns_cyc
24!
25! 667 2010-12-23 12:06:00Z suehring/gryschka
26! Exchange of terminate_coupled between ocean and atmosphere via PE0
27! Minimum grid spacing dxyz2_min(k) is now calculated using dzw instead of dzu
28!
29! 622 2010-12-10 08:08:13Z raasch
30! optional barriers included in order to speed up collective operations
31!
32! 343 2009-06-24 12:59:09Z maronga
33! Additional timestep criterion in case of simulations with plant canopy
34! Output of messages replaced by message handling routine.
35!
36! 222 2009-01-12 16:04:16Z letzel
37! Implementation of a MPI-1 Coupling: replaced myid with target_id
38! Bugfix for nonparallel execution
39!
40! 108 2007-08-24 15:10:38Z letzel
41! modifications to terminate coupled runs
42!
43! RCS Log replace by Id keyword, revision history cleaned up
44!
45! Revision 1.21  2006/02/23 12:59:44  raasch
46! nt_anz renamed current_timestep_number
47!
48! Revision 1.1  1997/08/11 06:26:19  raasch
49! Initial revision
50!
51!
52! Description:
53! ------------
54! Compute the time step under consideration of the FCL and diffusion criterion.
55!------------------------------------------------------------------------------!
56
57    USE arrays_3d
58    USE control_parameters
59    USE cpulog
60    USE grid_variables
61    USE indices
62    USE interfaces
63    USE pegrid
64    USE statistics
65
66    IMPLICIT NONE
67
68    INTEGER ::  i, j, k, u_max_cfl_ijk(3), v_max_cfl_ijk(3)
69
70    REAL ::  div, dt_diff, dt_diff_l, dt_plant_canopy,                 &
71             dt_plant_canopy_l,                                        &
72             dt_plant_canopy_u, dt_plant_canopy_v, dt_plant_canopy_w,  & 
73             dt_u, dt_v, dt_w, lad_max,                                &
74             u_gtrans_l, u_max_cfl, vabs_max, value, v_gtrans_l, v_max_cfl
75
76    REAL, DIMENSION(2)         ::  uv_gtrans, uv_gtrans_l
77    REAL, DIMENSION(nzb+1:nzt) ::  dxyz2_min
78
79
80
81    CALL cpu_log( log_point(12), 'calculate_timestep', 'start' )
82
83!
84!-- In case of Galilei-transform not using the geostrophic wind as translation
85!-- velocity, compute the volume-averaged horizontal velocity components, which
86!-- will then be subtracted from the horizontal wind for the time step and
87!-- horizontal advection routines.
88    IF ( galilei_transformation  .AND. .NOT.  use_ug_for_galilei_tr )  THEN
89       IF ( flow_statistics_called )  THEN
90!
91!--       Horizontal averages already existent, just need to average them
92!--       vertically.
93          u_gtrans = 0.0
94          v_gtrans = 0.0
95          DO  k = nzb+1, nzt
96             u_gtrans = u_gtrans + hom(k,1,1,0)
97             v_gtrans = v_gtrans + hom(k,1,2,0)
98          ENDDO
99          u_gtrans = u_gtrans / REAL( nzt - nzb )
100          v_gtrans = v_gtrans / REAL( nzt - nzb )
101       ELSE
102!
103!--       Averaging over the entire model domain.
104          uv_gtrans_l = 0.0
105          DO  i = nxl, nxr
106             DO  j = nys, nyn
107                DO  k = nzb+1, nzt
108                   uv_gtrans_l(1) = uv_gtrans_l(1) + u(k,j,i)
109                   uv_gtrans_l(2) = uv_gtrans_l(2) + v(k,j,i)
110                ENDDO
111             ENDDO
112          ENDDO
113          uv_gtrans_l = uv_gtrans_l / REAL( (nxr-nxl+1)*(nyn-nys+1)*(nzt-nzb) )
114#if defined( __parallel )
115          IF ( collective_wait )  CALL MPI_BARRIER( comm2d, ierr )
116          CALL MPI_ALLREDUCE( uv_gtrans_l, uv_gtrans, 2, MPI_REAL, MPI_SUM, &
117                              comm2d, ierr )
118          u_gtrans = uv_gtrans(1) / REAL( numprocs )
119          v_gtrans = uv_gtrans(2) / REAL( numprocs )
120#else
121          u_gtrans = uv_gtrans_l(1)
122          v_gtrans = uv_gtrans_l(2)
123#endif
124       ENDIF
125    ENDIF
126
127!
128!-- Determine the maxima of the velocity components.
129    CALL global_min_max( nzb, nzt+1, nysg, nyng, nxlg, nxrg, u, 'abs', 0.0, &
130                         u_max, u_max_ijk )
131    CALL global_min_max( nzb, nzt+1, nysg, nyng, nxlg, nxrg, v, 'abs', 0.0, &
132                         v_max, v_max_ijk )
133    CALL global_min_max( nzb, nzt+1, nysg, nyng, nxlg, nxrg, w, 'abs', 0.0, &
134                         w_max, w_max_ijk )
135
136!
137!-- In case of Galilei transformation, the horizontal velocity maxima have
138!-- to be calculated from the transformed horizontal velocities
139    IF ( galilei_transformation )  THEN
140       CALL global_min_max( nzb, nzt+1, nysg, nyng, nxlg, nxrg, u, 'absoff', &
141                            u_gtrans, u_max_cfl, u_max_cfl_ijk )
142       CALL global_min_max( nzb, nzt+1, nysg, nyng, nxlg, nxrg, v, 'absoff', &
143                            v_gtrans, v_max_cfl, v_max_cfl_ijk )
144    ELSE
145       u_max_cfl = u_max
146       v_max_cfl = v_max
147       u_max_cfl_ijk = u_max_ijk
148       v_max_cfl_ijk = v_max_ijk
149    ENDIF
150
151
152    IF ( .NOT. dt_fixed )  THEN
153!
154!--    Variable time step:
155!
156!--    For each component, compute the maximum time step according to the
157!--    CFL-criterion.
158       dt_u = dx / ( ABS( u_max_cfl ) + 1.0E-10 )
159       dt_v = dy / ( ABS( v_max_cfl ) + 1.0E-10 )
160       dt_w = dzu(MAX( 1, w_max_ijk(1) )) / ( ABS( w_max ) + 1.0E-10 )
161
162!
163!--    Compute time step according to the diffusion criterion.
164!--    First calculate minimum grid spacing which only depends on index k
165!--    Note: also at k=nzb+1 a full grid length is being assumed, although
166!--          in the Prandtl-layer friction term only dz/2 is used.
167!--          Experience from the old model seems to justify this.
168       dt_diff_l = 999999.0
169
170       DO  k = nzb+1, nzt
171           dxyz2_min(k) = MIN( dx2, dy2, dzw(k)*dzw(k) ) * 0.125
172       ENDDO
173
174!$OMP PARALLEL private(i,j,k,value) reduction(MIN: dt_diff_l)
175!$OMP DO
176       DO  i = nxl, nxr
177          DO  j = nys, nyn
178             DO  k = nzb+1, nzt
179                value = dxyz2_min(k) / ( MAX( kh(k,j,i), km(k,j,i) ) + 1E-20 )
180
181                dt_diff_l = MIN( value, dt_diff_l )
182             ENDDO
183          ENDDO
184       ENDDO
185!$OMP END PARALLEL
186#if defined( __parallel )
187       IF ( collective_wait )  CALL MPI_BARRIER( comm2d, ierr )
188       CALL MPI_ALLREDUCE( dt_diff_l, dt_diff, 1, MPI_REAL, MPI_MIN, comm2d, &
189                           ierr )
190#else
191       dt_diff = dt_diff_l
192#endif
193
194!
195!--    Additional timestep criterion with plant canopies:
196!--    it is not allowed to extract more than the available momentum
197       IF ( plant_canopy ) THEN
198
199          dt_plant_canopy_l = 0.0
200          DO  i = nxl, nxr
201             DO  j = nys, nyn
202                DO k = nzb+1, nzt
203                   dt_plant_canopy_u = cdc(k,j,i) * lad_u(k,j,i) *  &
204                                       SQRT(     u(k,j,i)**2     +  &
205                                             ( ( v(k,j,i-1)      +  &
206                                                 v(k,j,i)        +  &
207                                                 v(k,j+1,i)      +  &
208                                                 v(k,j+1,i-1) )     &
209                                               / 4.0 )**2        +  &
210                                             ( ( w(k-1,j,i-1)    +  &
211                                                 w(k-1,j,i)      +  &
212                                                 w(k,j,i-1)      +  &
213                                                 w(k,j,i) )         &
214                                                 / 4.0 )**2 ) 
215                   IF ( dt_plant_canopy_u > dt_plant_canopy_l ) THEN
216                      dt_plant_canopy_l = dt_plant_canopy_u 
217                   ENDIF
218                   dt_plant_canopy_v = cdc(k,j,i) * lad_v(k,j,i) *  &
219                                       SQRT( ( ( u(k,j-1,i)      +  &
220                                                 u(k,j-1,i+1)    +  &
221                                                 u(k,j,i)        +  &
222                                                 u(k,j,i+1) )       &
223                                               / 4.0 )**2        +  &
224                                                 v(k,j,i)**2     +  &
225                                             ( ( w(k-1,j-1,i)    +  &
226                                                 w(k-1,j,i)      +  &
227                                                 w(k,j-1,i)      +  &
228                                                 w(k,j,i) )         &
229                                                 / 4.0 )**2 ) 
230                   IF ( dt_plant_canopy_v > dt_plant_canopy_l ) THEN
231                      dt_plant_canopy_l = dt_plant_canopy_v
232                   ENDIF                   
233                   dt_plant_canopy_w = cdc(k,j,i) * lad_w(k,j,i) *  &
234                                       SQRT( ( ( u(k,j,i)        +  &
235                                                 u(k,j,i+1)      +  &
236                                                 u(k+1,j,i)      +  &
237                                                 u(k+1,j,i+1) )     &
238                                               / 4.0 )**2        +  &
239                                             ( ( v(k,j,i)        +  &
240                                                 v(k,j+1,i)      +  &
241                                                 v(k+1,j,i)      +  &
242                                                 v(k+1,j+1,i) )     &
243                                               / 4.0 )**2        +  &
244                                                 w(k,j,i)**2 )     
245                   IF ( dt_plant_canopy_w > dt_plant_canopy_l ) THEN
246                      dt_plant_canopy_l = dt_plant_canopy_w
247                   ENDIF
248                ENDDO
249             ENDDO
250          ENDDO 
251
252          IF ( dt_plant_canopy_l > 0.0 ) THEN
253!
254!--          Invert dt_plant_canopy_l and apply a security timestep factor 0.1
255             dt_plant_canopy_l = 0.1 / dt_plant_canopy_l
256          ELSE
257!
258!--          In case of inhomogeneous plant canopy, some processors may have no
259!--          canopy at all. Then use dt_max as dummy instead.
260             dt_plant_canopy_l = dt_max
261          ENDIF
262
263!
264!--       Determine the global minumum
265#if defined( __parallel )
266          IF ( collective_wait )  CALL MPI_BARRIER( comm2d, ierr )
267          CALL MPI_ALLREDUCE( dt_plant_canopy_l, dt_plant_canopy, 1, MPI_REAL, &
268                              MPI_MIN, comm2d, ierr )
269#else
270          dt_plant_canopy = dt_plant_canopy_l
271#endif
272
273       ELSE
274!
275!--       Use dt_diff as dummy value to avoid extra IF branches further below
276          dt_plant_canopy = dt_diff
277
278       ENDIF
279
280!
281!--    The time step is the minimum of the 3-4 components and the diffusion time
282!--    step minus a reduction (cfl_factor) to be on the safe side.
283!--    The time step must not exceed the maximum allowed value.
284       dt_3d = cfl_factor * MIN( dt_diff, dt_plant_canopy, dt_u, dt_v, dt_w )
285       dt_3d = MIN( dt_3d, dt_max )
286
287!
288!--    Remember the restricting time step criterion for later output.
289       IF ( MIN( dt_u, dt_v, dt_w ) < MIN( dt_diff, dt_plant_canopy ) )  THEN
290          timestep_reason = 'A'
291       ELSEIF ( dt_plant_canopy < dt_diff )  THEN
292          timestep_reason = 'C'
293       ELSE
294          timestep_reason = 'D'
295       ENDIF
296
297!
298!--    Set flag if the time step becomes too small.
299       IF ( dt_3d < ( 0.00001 * dt_max ) )  THEN
300          stop_dt = .TRUE.
301
302          WRITE( message_string, * ) 'Time step has reached minimum limit.',  &
303               '&dt              = ', dt_3d, ' s  Simulation is terminated.', &
304               '&old_dt          = ', old_dt, ' s',                           &
305               '&dt_u            = ', dt_u, ' s',                             &
306               '&dt_v            = ', dt_v, ' s',                             &
307               '&dt_w            = ', dt_w, ' s',                             &
308               '&dt_diff         = ', dt_diff, ' s',                          &
309               '&dt_plant_canopy = ', dt_plant_canopy, ' s',                  &
310               '&u_max_cfl   = ', u_max_cfl, ' m/s   k=', u_max_cfl_ijk(1),   &
311               '  j=', u_max_ijk(2), '  i=', u_max_ijk(3),                    &
312               '&v_max_cfl   = ', v_max_cfl, ' m/s   k=', v_max_cfl_ijk(1),   &
313               '  j=', v_max_ijk(2), '  i=', v_max_ijk(3),                    &
314               '&w_max       = ', w_max, ' m/s   k=', w_max_ijk(1),           &
315               '  j=', w_max_ijk(2), '  i=', w_max_ijk(3)
316          CALL message( 'timestep', 'PA0312', 0, 1, 0, 6, 0 )
317!
318!--       In case of coupled runs inform the remote model of the termination
319!--       and its reason, provided the remote model has not already been
320!--       informed of another termination reason (terminate_coupled > 0) before.
321#if defined( __parallel )
322          IF ( coupling_mode /= 'uncoupled' .AND. terminate_coupled == 0 )  THEN
323             terminate_coupled = 2
324             IF ( myid == 0 ) THEN
325                CALL MPI_SENDRECV( &
326                     terminate_coupled,        1, MPI_INTEGER, target_id,  0, &
327                     terminate_coupled_remote, 1, MPI_INTEGER, target_id,  0, &
328                     comm_inter, status, ierr )
329             ENDIF
330             CALL MPI_BCAST( terminate_coupled_remote, 1, MPI_INTEGER, 0, comm2d, ierr)
331          ENDIF
332#endif
333       ENDIF
334
335!
336!--    Ensure a smooth value (two significant digits) of the timestep.
337       div = 1000.0
338       DO  WHILE ( dt_3d < div )
339          div = div / 10.0
340       ENDDO
341       dt_3d = NINT( dt_3d * 100.0 / div ) * div / 100.0
342
343!
344!--    Adjust the time step
345       old_dt = dt_3d
346
347    ENDIF
348
349    CALL cpu_log( log_point(12), 'calculate_timestep', 'stop' )
350
351 END SUBROUTINE timestep
Note: See TracBrowser for help on using the repository browser.