!> @file time_integration_spinup.f90 !--------------------------------------------------------------------------------------------------! ! This file is part of the PALM model system. ! ! PALM is free software: you can redistribute it and/or modify it under the terms of the GNU General ! Public License as published by the Free Software Foundation, either version 3 of the License, or ! (at your option) any later version. ! ! PALM is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the ! implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General ! Public License for more details. ! ! You should have received a copy of the GNU General Public License along with PALM. If not, see ! . ! ! Copyright 1997-2021 Leibniz Universitaet Hannover !--------------------------------------------------------------------------------------------------! ! ! ! Current revisions: ! ----------------- ! ! ! Former revisions: ! ----------------- ! $Id: time_integration_spinup.f90 4828 2021-01-05 11:21:41Z forkel $ ! Bugfix in time-control of indoor model at the very first time step ! ! 4750 2020-10-16 14:27:48Z suehring ! - bugfix, call hourly-based indoor model only once per hour, not every timestep. ! - optionally switch-off/on the indoor model during spinup ! ! 4687 2020-09-21 19:40:16Z maronga ! Indoor model is now available during spinup ! ! 4671 2020-09-09 20:27:58Z pavelkrc ! Implementation of downward facing USM and LSM surfaces ! ! 4669 2020-09-09 13:43:47Z pavelkrc ! - Fix missing call of radiation after spinup ! - Fix calculation of force_radiation_call ! - Fix calculation of radiation times ! ! 4668 2020-09-09 13:00:16Z pavelkrc ! Improve debug messages during timestepping ! ! 4654 2020-08-28 13:47:23Z pavelkrc ! Add possibility to output surface data during spinup (author: J. Resler) ! ! 4635 2020-08-05 16:44:15Z suehring ! Bugfix in calling radiation_control, was called every dt_spinup rather than only dt_radiation ! ! 4631 2020-08-03 13:48:14Z suehring ! Set pt1 attribute only element-wise ! ! 4540 2020-05-18 15:23:29Z raasch ! File re-formatted to follow the PALM coding standard ! ! 4457 2020-03-11 14:20:43Z raasch ! Use statement for exchange horiz added ! ! 4444 2020-03-05 15:59:50Z raasch ! Bugfix: cpp-directives for serial mode added ! ! 4360 2020-01-07 11:25:50Z suehring ! Enable output of diagnostic quantities, e.g. 2-m temperature ! ! 4227 2019-09-10 18:04:34Z gronemeier ! Implement new palm_date_time_mod ! ! 4223 2019-09-10 09:20:47Z gronemeier ! Corrected "Former revisions" section ! ! 4064 2019-07-01 05:33:33Z gronemeier ! Moved call to radiation module out of intermediate time loop ! ! 4023 2019-06-12 13:20:01Z maronga ! Time stamps are now negative in run control output ! ! 3885 2019-04-11 11:29:34Z kanani ! Changes related to global restructuring of location messages and introduction of additional debug ! messages ! ! 3766 2019-02-26 16:23:41Z raasch ! Unused variable removed ! ! 3719 2019-02-06 13:10:18Z kanani ! Removed log_point(19,54,74,50,75), since they count together with same log points in ! time_integration, impossible to separate the contributions. Instead, the entire spinup gets an ! individual log_point in palm.f90 ! ! 3655 2019-01-07 16:51:22Z knoop ! Removed call to calculation of near air (10 cm) potential temperature (now in surface layer fluxes) ! ! 2296 2017-06-28 07:53:56Z maronga ! Initial revision ! ! ! Description: ! ------------ !> Integration in time of the non-atmospheric model components such as land surface model and urban !> surface model !--------------------------------------------------------------------------------------------------! SUBROUTINE time_integration_spinup USE arrays_3d, & ONLY: pt, & pt_p, & u, & u_init, & v, & v_init USE control_parameters, & ONLY: averaging_interval_pr, & constant_diffusion, & constant_flux_layer, & coupling_start_time, & data_output_during_spinup, & debug_output_timestep, & debug_string, & dopr_n, & do_sum, & dt_averaging_input_pr, & dt_dopr, & dt_dots, & dt_do2d_xy, & dt_do3d, & dt_spinup, & dt_3d, & humidity, & indoor_model, & intermediate_timestep_count, & intermediate_timestep_count_max, & land_surface, & simulated_time, & simulated_time_chr, & skip_time_dopr, & skip_time_do2d_xy, & skip_time_do3d, & spinup_pt_amplitude, & spinup_pt_mean, & spinup_time, & surface_output, & timestep_count, & time_dopr, & time_dopr_av, & time_dots, & time_do2d_xy, & time_do3d, & time_run_control, & time_since_reference_point, & urban_surface USE cpulog, & ONLY: cpu_log, & log_point_s USE diagnostic_output_quantities_mod, & ONLY: doq_calculate USE exchange_horiz_mod, & ONLY: exchange_horiz USE indices, & ONLY: nbgp, & nzb, & nzt, & nysg, & nyng, & nxlg, & nxrg USE indoor_model_mod, & ONLY: dt_indoor, & im_main_heatcool, & indoor_during_spinup, & time_indoor USE land_surface_model_mod, & ONLY: lsm_energy_balance, & lsm_swap_timelevel USE pegrid #if defined( __parallel ) USE pmc_interface, & ONLY: nested_run #endif USE kinds USE palm_date_time_mod, & ONLY: get_date_time, & seconds_per_hour USE radiation_model_mod, & ONLY: dt_radiation, & force_radiation_call, & radiation, & radiation_control, & radiation_interaction, & radiation_interactions, & time_radiation USE statistics, & ONLY: flow_statistics_called USE surface_data_output_mod, & ONLY: dt_dosurf, & skip_time_dosurf, & surface_data_output, & time_dosurf USE surface_layer_fluxes_mod, & ONLY: surface_layer_fluxes USE surface_mod, & ONLY : surf_lsm_h, & surf_lsm_v, surf_usm_h, & surf_usm_v USE urban_surface_mod, & ONLY: usm_energy_balance, & usm_swap_timelevel IMPLICIT NONE CHARACTER(LEN=1) :: sign_chr !< String containing '-' or ' ' CHARACTER(LEN=9) :: time_since_reference_point_chr !< time since reference point, i.e., negative during spinup CHARACTER(LEN=9) :: time_to_string !< INTEGER(iwp) :: current_timestep_number_spinup = 0 !< number if timestep during spinup INTEGER(iwp) :: day_of_year !< day of the year INTEGER(iwp) :: i !< running index INTEGER(iwp) :: j !< running index INTEGER(iwp) :: k !< running index INTEGER(iwp) :: l !< running index INTEGER(iwp) :: m !< running index LOGICAL :: run_control_header_spinup = .FALSE. !< flag parameter for steering whether the header information must be output REAL(wp) :: dt_save !< temporary storage for time step REAL(wp) :: pt_spinup !< temporary storage of temperature REAL(wp) :: second_of_day !< second of the day REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: pt_save !< temporary storage of temperature REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: u_save !< temporary storage of u wind component REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: v_save !< temporary storage of v wind component ! !-- Save 3D arrays because they are to be changed for spinup purpose ALLOCATE( pt_save(nzb:nzt+1,nysg:nyng,nxlg:nxrg) ) ALLOCATE( u_save(nzb:nzt+1,nysg:nyng,nxlg:nxrg) ) ALLOCATE( v_save(nzb:nzt+1,nysg:nyng,nxlg:nxrg) ) CALL exchange_horiz( pt, nbgp ) CALL exchange_horiz( u, nbgp ) CALL exchange_horiz( v, nbgp ) pt_save = pt u_save = u v_save = v ! !-- Set the same wall-adjacent velocity to all grid points. The sign of the original velocity field !-- must be preserved because the surface schemes crash otherwise. The precise reason is still !-- unknown. A minimum velocity of 0.1 m/s is used to maintain turbulent transfer at the surface. IF ( land_surface ) THEN DO l = 0, 1 DO m = 1, surf_lsm_h(l)%ns i = surf_lsm_h(l)%i(m) j = surf_lsm_h(l)%j(m) k = surf_lsm_h(l)%k(m) u(k,j,i) = SIGN( 1.0_wp, u_init(k) ) * MAX( ABS( u_init(k) ), 0.1_wp) v(k,j,i) = SIGN( 1.0_wp, v_init(k) ) * MAX( ABS( v_init(k) ), 0.1_wp) ENDDO ENDDO DO l = 0, 3 DO m = 1, surf_lsm_v(l)%ns i = surf_lsm_v(l)%i(m) j = surf_lsm_v(l)%j(m) k = surf_lsm_v(l)%k(m) u(k,j,i) = SIGN( 1.0_wp, u_init(k) ) * MAX( ABS( u_init(k) ), 0.1_wp) v(k,j,i) = SIGN( 1.0_wp, v_init(k) ) * MAX( ABS( v_init(k) ), 0.1_wp) ENDDO ENDDO ENDIF IF ( urban_surface ) THEN DO l = 0, 1 DO m = 1, surf_usm_h(l)%ns i = surf_usm_h(l)%i(m) j = surf_usm_h(l)%j(m) k = surf_usm_h(l)%k(m) u(k,j,i) = SIGN( 1.0_wp, u_init(k) ) * MAX( ABS( u_init(k) ), 0.1_wp) v(k,j,i) = SIGN( 1.0_wp, v_init(k) ) * MAX( ABS( v_init(k) ), 0.1_wp) ENDDO ENDDO DO l = 0, 3 DO m = 1, surf_usm_v(l)%ns i = surf_usm_v(l)%i(m) j = surf_usm_v(l)%j(m) k = surf_usm_v(l)%k(m) u(k,j,i) = SIGN( 1.0_wp, u_init(k) ) * MAX( ABS( u_init(k) ), 0.1_wp) v(k,j,i) = SIGN( 1.0_wp, v_init(k) ) * MAX( ABS( v_init(k) ), 0.1_wp) ENDDO ENDDO ENDIF CALL exchange_horiz( u, nbgp ) CALL exchange_horiz( v, nbgp ) dt_save = dt_3d dt_3d = dt_spinup CALL location_message( 'wall/soil spinup time-stepping', 'start' ) ! !-- Start of the time loop DO WHILE ( simulated_time < spinup_time ) CALL cpu_log( log_point_s(15), 'timesteps spinup', 'start' ) IF ( debug_output_timestep ) THEN WRITE( debug_string, * ) 'time_integration_spinup', simulated_time CALL debug_message( debug_string, 'start' ) ENDIF ! !-- Start of intermediate step loop intermediate_timestep_count = 0 DO WHILE ( intermediate_timestep_count < intermediate_timestep_count_max ) intermediate_timestep_count = intermediate_timestep_count + 1 ! !-- Set the steering factors for the prognostic equations which depend on the timestep scheme CALL timestep_scheme_steering ! !-- Estimate a near-surface air temperature based on the position of the sun and user input !-- about mean temperature and amplitude. The time is shifted by one hour to simulate a lag !-- between air temperature and incoming radiation. CALL get_date_time( simulated_time - spinup_time - seconds_per_hour, & day_of_year = day_of_year, second_of_day = second_of_day ) pt_spinup = spinup_pt_mean + spinup_pt_amplitude * & solar_angle( day_of_year, second_of_day ) ! !-- Map air temperature to all grid points in the vicinity of a surface element IF ( land_surface ) THEN DO l = 0, 1 DO m = 1, surf_lsm_h(l)%ns i = surf_lsm_h(l)%i(m) j = surf_lsm_h(l)%j(m) k = surf_lsm_h(l)%k(m) pt(k,j,i) = pt_spinup ENDDO ENDDO DO l = 0, 3 DO m = 1, surf_lsm_v(l)%ns i = surf_lsm_v(l)%i(m) j = surf_lsm_v(l)%j(m) k = surf_lsm_v(l)%k(m) pt(k,j,i) = pt_spinup ENDDO ENDDO ENDIF IF ( urban_surface ) THEN DO l = 0, 1 DO m = 1, surf_usm_h(l)%ns i = surf_usm_h(l)%i(m) j = surf_usm_h(l)%j(m) k = surf_usm_h(l)%k(m) pt(k,j,i) = pt_spinup !!!!!!!!!!!!!!!!HACK!!!!!!!!!!!!! surf_usm_h(l)%pt1(m) = pt_spinup !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ENDDO ENDDO DO l = 0, 3 DO m = 1, surf_usm_v(l)%ns i = surf_usm_v(l)%i(m) j = surf_usm_v(l)%j(m) k = surf_usm_v(l)%k(m) pt(k,j,i) = pt_spinup !!!!!!!!!!!!!!!!HACK!!!!!!!!!!!!! surf_usm_v(l)%pt1(m) = pt_spinup !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ENDDO ENDDO ENDIF CALL exchange_horiz( pt, nbgp ) ! !-- Swap the time levels in preparation for the next time step. timestep_count = timestep_count + 1 IF ( land_surface ) THEN CALL lsm_swap_timelevel ( 0 ) ENDIF IF ( urban_surface ) THEN CALL usm_swap_timelevel ( 0 ) ENDIF IF ( land_surface ) THEN CALL lsm_swap_timelevel ( MOD( timestep_count, 2 ) ) ENDIF IF ( urban_surface ) THEN CALL usm_swap_timelevel ( MOD( timestep_count, 2 ) ) ENDIF ! !-- If required, compute virtual potential temperature IF ( humidity ) THEN CALL compute_vpt ENDIF ! !-- Compute the diffusion quantities IF ( .NOT. constant_diffusion ) THEN ! !-- First the vertical (and horizontal) fluxes in the surface (constant flux) layer are !-- computed IF ( constant_flux_layer ) THEN CALL surface_layer_fluxes ENDIF ! !-- If required, solve the energy balance for the surface and run soil model. Call for !-- horizontal as well as vertical surfaces. The prognostic equation for soil moisure is !-- switched off IF ( land_surface ) THEN CALL lsm_energy_balance( .TRUE. ) ENDIF ! !-- If required, solve the energy balance for urban surfaces and run the material heat model IF (urban_surface) THEN CALL usm_energy_balance( .TRUE. ) ENDIF ENDIF ENDDO ! Intermediate step loop ! !-- If required, calculate radiative fluxes and heating rates IF ( radiation ) THEN time_radiation = time_radiation + dt_3d IF ( time_radiation >= dt_radiation .OR. force_radiation_call ) THEN IF ( .NOT. force_radiation_call ) THEN time_radiation = time_radiation - dt_radiation ENDIF CALL radiation_control IF ( radiation_interactions ) THEN CALL radiation_interaction ENDIF ! !-- Reset forcing of radiation call force_radiation_call = .FALSE. ENDIF ENDIF ! !-- If required, calculate indoor temperature, waste heat, heat flux !-- through wall, etc. !-- dt_indoor steers the frequency of the indoor model calculations. !-- Note, at first timestep indoor model is called, in order to provide !-- a waste heat flux. IF ( indoor_model .AND. indoor_during_spinup ) THEN time_indoor = time_indoor + dt_3d IF ( time_indoor >= dt_indoor .OR. current_timestep_number_spinup == 0 ) THEN IF ( time_indoor >= dt_indoor ) time_indoor = time_indoor - dt_indoor CALL im_main_heatcool ENDIF ENDIF ! !-- Increase simulation time and output times current_timestep_number_spinup = current_timestep_number_spinup + 1 simulated_time = simulated_time + dt_3d simulated_time_chr = time_to_string( simulated_time ) time_since_reference_point = simulated_time - coupling_start_time time_since_reference_point_chr = time_to_string( ABS( time_since_reference_point ) ) IF ( time_since_reference_point < 0.0_wp ) THEN sign_chr = '-' ELSE sign_chr = ' ' ENDIF IF ( data_output_during_spinup ) THEN IF ( simulated_time >= skip_time_do2d_xy ) THEN time_do2d_xy = time_do2d_xy + dt_3d ENDIF IF ( simulated_time >= skip_time_do3d ) THEN time_do3d = time_do3d + dt_3d ENDIF time_dots = time_dots + dt_3d IF ( simulated_time >= skip_time_dopr ) THEN time_dopr = time_dopr + dt_3d ENDIF IF ( surface_output ) THEN IF ( simulated_time >= skip_time_dosurf ) THEN time_dosurf = time_dosurf + dt_3d ENDIF ENDIF time_run_control = time_run_control + dt_3d ! !-- Carry out statistical analysis and output at the requested output times. !-- The MOD function is used for calculating the output time counters (like time_dopr) in !-- order to regard a possible decrease of the output time interval in case of restart runs. ! !-- Set a flag indicating that so far no statistics have been created for this time step flow_statistics_called = .FALSE. ! !-- If required, call flow_statistics for averaging in time IF ( averaging_interval_pr /= 0.0_wp .AND. & ( dt_dopr - time_dopr ) <= averaging_interval_pr .AND. & simulated_time >= skip_time_dopr ) & THEN time_dopr_av = time_dopr_av + dt_3d IF ( time_dopr_av >= dt_averaging_input_pr ) THEN do_sum = .TRUE. time_dopr_av = MOD( time_dopr_av, MAX( dt_averaging_input_pr, dt_3d ) ) ENDIF ENDIF IF ( do_sum ) CALL flow_statistics ! !-- Output of profiles IF ( time_dopr >= dt_dopr ) THEN IF ( dopr_n /= 0 ) CALL data_output_profiles time_dopr = MOD( time_dopr, MAX( dt_dopr, dt_3d ) ) time_dopr_av = 0.0_wp ! Due to averaging (see above) ENDIF ! !-- Output of time series IF ( time_dots >= dt_dots ) THEN CALL data_output_tseries time_dots = MOD( time_dots, MAX( dt_dots, dt_3d ) ) ENDIF ! !-- 2d-data output (cross-sections) IF ( time_do2d_xy >= dt_do2d_xy ) THEN CALL doq_calculate CALL data_output_2d( 'xy', 0 ) time_do2d_xy = MOD( time_do2d_xy, MAX( dt_do2d_xy, dt_3d ) ) ENDIF ! !-- 3d-data output (volume data) IF ( time_do3d >= dt_do3d ) THEN CALL doq_calculate CALL data_output_3d( 0 ) time_do3d = MOD( time_do3d, MAX( dt_do3d, dt_3d ) ) ENDIF ! !-- Output of surface data IF ( surface_output ) THEN IF ( time_dosurf >= dt_dosurf ) THEN CALL surface_data_output( 0 ) time_dosurf = MOD( time_dosurf, MAX( dt_dosurf, dt_3d ) ) ENDIF ENDIF ENDIF ! !-- Computation and output of run control parameters. This is also done whenever perturbations !-- have been imposed ! IF ( time_run_control >= dt_run_control .OR. & ! timestep_scheme(1:5) /= 'runge' .OR. disturbance_created ) THEN ! CALL run_control ! IF ( time_run_control >= dt_run_control ) THEN ! time_run_control = MOD( time_run_control, MAX( dt_run_control, dt_3d ) ) ! ENDIF ! ENDIF CALL cpu_log( log_point_s(15), 'timesteps spinup', 'stop' ) ! !-- Run control output IF ( myid == 0 ) THEN ! !-- If necessary, write header IF ( .NOT. run_control_header_spinup ) THEN CALL check_open( 15 ) WRITE ( 15, 100 ) run_control_header_spinup = .TRUE. ENDIF ! !-- Write some general information about the spinup in run control file WRITE ( 15, 101 ) current_timestep_number_spinup, sign_chr, & time_since_reference_point_chr, dt_3d, pt_spinup ! !-- Write buffer contents to disc immediately FLUSH( 15 ) ENDIF IF ( debug_output_timestep ) THEN WRITE( debug_string, * ) 'time_integration_spinup', simulated_time CALL debug_message( debug_string, 'end' ) ENDIF ENDDO ! Time loop ! !-- Write back saved arrays to the 3D arrays pt = pt_save pt_p = pt_save u = u_save v = v_save ! !-- Reset time step dt_3d = dt_save !-- Force radiation step in time zero !-- It is performed at the end of init_radiation in case of run without spinup time_radiation = dt_radiation DEALLOCATE(pt_save) DEALLOCATE(u_save) DEALLOCATE(v_save) #if defined( __parallel ) IF ( nested_run ) CALL MPI_BARRIER( MPI_COMM_WORLD, ierr ) #endif CALL location_message( 'wall/soil spinup time-stepping', 'finished' ) ! !-- Formats 100 FORMAT (///'Spinup control output:---------------------------------'// & 'ITER. HH:MM:SS DT PT(z_MO)---------------------------------') 101 FORMAT (I5,2X,A1,A9,1X,F6.2,3X,F6.2,2X,F6.2) CONTAINS ! !-- Returns the cosine of the solar zenith angle at a given time. This routine is similar to that !-- for calculation zenith (see radiation_model_mod.f90) !> @todo Load function calc_zenith of radiation model instead of rewrite the function here. FUNCTION solar_angle( day_of_year, second_of_day ) USE basic_constants_and_equations_mod, & ONLY: pi USE kinds USE radiation_model_mod, & ONLY: decl_1, & decl_2, & decl_3, & lat, & lon IMPLICIT NONE INTEGER(iwp), INTENT(IN) :: day_of_year !< day of the year REAL(wp) :: declination !< solar declination angle REAL(wp) :: hour_angle !< solar hour angle REAL(wp), INTENT(IN) :: second_of_day !< current time of the day in UTC REAL(wp) :: solar_angle !< cosine of the solar zenith angle ! !-- Calculate solar declination and hour angle declination = ASIN( decl_1 * SIN( decl_2 * REAL( day_of_year, KIND = wp) - decl_3 ) ) hour_angle = 2.0_wp * pi * ( second_of_day / 86400.0_wp ) + lon - pi ! !-- Calculate cosine of solar zenith angle solar_angle = SIN( lat ) * SIN( declination ) + COS( lat ) * COS( declination ) * & COS( hour_angle ) END FUNCTION solar_angle END SUBROUTINE time_integration_spinup