source: palm/trunk/SOURCE/time_integration.f90 @ 113

 SUBROUTINE time_integration

!------------------------------------------------------------------------------!
! Actual revisions:
! -----------------
! 
!
! Former revisions:
! -----------------
! $Id: time_integration.f90 110 2007-10-05 05:13:14Z raasch $
!
! 108 2007-08-24 15:10:38Z letzel
! Call of new routine surface_coupler,
! presure solver is called after the first Runge-Kutta substep instead of the
! last in case that call_psolver_at_all_substeps = .F.; for this case, the
! random perturbation has to be added to the velocity fields also after the
! first substep
!
! 97 2007-06-21 08:23:15Z raasch
! diffusivities is called with argument rho in case of ocean runs,
! new argument pt_/prho_reference in calls of diffusivities,
! ghostpoint exchange for salinity and density
!
! 87 2007-05-22 15:46:47Z raasch
! var_hom renamed pr_palm
!
! 75 2007-03-22 09:54:05Z raasch
! Move call of user_actions( 'after_integration' ) below increment of times
! and counters,
! calls of prognostic_equations_.. changed to .._noopt, .._cache, and
! .._vector, these calls are now controlled by switch loop_optimization,
! uxrp, vynp eliminated, 2nd+3rd argument removed from exchange horiz,
! moisture renamed humidity
!
! RCS Log replace by Id keyword, revision history cleaned up
!
! Revision 1.8  2006/08/22 14:16:05  raasch
! Disturbances are imposed only for the last Runge-Kutta-substep
!
! Revision 1.2  2004/04/30 13:03:40  raasch
! decalpha-specific warning removed, routine name changed to time_integration,
! particle advection is carried out only once during the intermediate steps,
! impulse_advec renamed momentum_advec
!
! Revision 1.1  1997/08/11 06:19:04  raasch
! Initial revision
!
!
! Description:
! ------------
! Integration in time of the model equations, statistical analysis and graphic
! output
!------------------------------------------------------------------------------!

    USE arrays_3d
    USE averaging
    USE control_parameters
    USE cpulog
#if defined( __dvrp_graphics )
    USE DVRP
#endif
    USE grid_variables
    USE indices
    USE interaction_droplets_ptq_mod
    USE interfaces
    USE particle_attributes
    USE pegrid
    USE prognostic_equations_mod
    USE statistics
    USE user_actions_mod

    IMPLICIT NONE

    CHARACTER (LEN=9) ::  time_to_string
    INTEGER ::  i, j, k

!
!-- At the beginning of a simulation determine the time step as well as
!-- determine and print out the run control parameters
    IF ( simulated_time == 0.0 )  CALL timestep
    CALL run_control

!
!-- Data exchange between coupled models in case that a call has been omitted 
!-- at the end of the previous run of a job chain.
    IF ( coupling_mode /= 'uncoupled' )  THEN
!
!--    In case of model termination initiated by the local model the coupler 
!--    must not be called because this would again cause an MPI hang. 
       DO WHILE ( time_coupling >= dt_coupling .AND. terminate_coupled == 0 )
          CALL surface_coupler
          time_coupling = time_coupling - dt_coupling
       ENDDO
    ENDIF


#if defined( __dvrp_graphics )
!
!-- Time measurement with dvrp software  
    CALL DVRP_LOG_EVENT( 2, current_timestep_number )
#endif

!
!-- Start of the time loop
    DO  WHILE ( simulated_time < end_time  .AND.  .NOT. stop_dt  .AND. &
                .NOT. terminate_run )

       CALL cpu_log( log_point_s(10), 'timesteps', 'start' )

!
!--    Determine size of next time step
       IF ( simulated_time /= 0.0 )  CALL timestep

!
!--    Execute the user-defined actions
       CALL user_actions( 'before_timestep' )

!
!--    Start of intermediate step loop
       intermediate_timestep_count = 0
       DO  WHILE ( intermediate_timestep_count < &
                   intermediate_timestep_count_max )

          intermediate_timestep_count = intermediate_timestep_count + 1

!
!--       Set the steering factors for the prognostic equations which depend
!--       on the timestep scheme
          CALL timestep_scheme_steering

!
!--       Solve the prognostic equations. A fast cache optimized version with
!--       only one single loop is used in case of Piascek-Williams advection
!--       scheme. NEC vector machines use a different version, because
!--       in the other versions a good vectorization is prohibited due to
!--       inlining problems.
          IF ( loop_optimization == 'vector' )  THEN
             CALL prognostic_equations_vector
          ELSE
             IF ( momentum_advec == 'ups-scheme'  .OR.  &
                  scalar_advec == 'ups-scheme'   .OR.  &
                  scalar_advec == 'bc-scheme' )        &
             THEN
                CALL prognostic_equations_noopt
             ELSE
                CALL prognostic_equations_cache
             ENDIF
          ENDIF

!
!--       Particle advection (only once during intermediate steps, because
!--       it uses an Euler-step)
          IF ( particle_advection  .AND.                         &
               simulated_time >= particle_advection_start  .AND. &
               intermediate_timestep_count == 1 )  THEN
             CALL advec_particles
             first_call_advec_particles = .FALSE.
          ENDIF

!
!--       Interaction of droplets with temperature and specific humidity.
!--       Droplet condensation and evaporation is calculated within
!--       advec_particles.
          IF ( cloud_droplets  .AND.  &
               intermediate_timestep_count == intermediate_timestep_count_max )&
          THEN
             CALL interaction_droplets_ptq
          ENDIF

!
!--       Exchange of ghost points (lateral boundary conditions)
          CALL cpu_log( log_point(26), 'exchange-horiz-progn', 'start' )
          CALL exchange_horiz( u_p )
          CALL exchange_horiz( v_p )
          CALL exchange_horiz( w_p )
          CALL exchange_horiz( pt_p )
          IF ( .NOT. constant_diffusion       )  CALL exchange_horiz( e_p )
          IF ( ocean )  THEN
             CALL exchange_horiz( sa_p )
             CALL exchange_horiz( rho )
          ENDIF
          IF ( humidity  .OR.  passive_scalar )  CALL exchange_horiz( q_p )
          IF ( cloud_droplets )  THEN
             CALL exchange_horiz( ql )
             CALL exchange_horiz( ql_c )
             CALL exchange_horiz( ql_v )
             CALL exchange_horiz( ql_vp )
          ENDIF

          CALL cpu_log( log_point(26), 'exchange-horiz-progn', 'stop' )

!
!--       Apply time filter in case of leap-frog timestep
          IF ( tsc(2) == 2.0  .AND.  timestep_scheme(1:8) == 'leapfrog' )  THEN
             CALL asselin_filter
          ENDIF

!
!--       Boundary conditions for the prognostic quantities (except of the
!--       velocities at the outflow in case of a non-cyclic lateral wall)
          CALL boundary_conds( 'main' )

!
!--       Swap the time levels in preparation for the next time step.
          CALL swap_timelevel

!
!--       Temperature offset must be imposed at cyclic boundaries in x-direction
!--       when a sloping surface is used
          IF ( sloping_surface )  THEN
             IF ( nxl ==  0 )  pt(:,:,nxl-1) = pt(:,:,nxl-1) - pt_slope_offset
             IF ( nxr == nx )  pt(:,:,nxr+1) = pt(:,:,nxr+1) + pt_slope_offset
          ENDIF

!
!--       Impose a random perturbation on the horizontal velocity field
          IF ( create_disturbances  .AND.                                      &
               ( call_psolver_at_all_substeps  .AND.                           &
               intermediate_timestep_count == intermediate_timestep_count_max )&
          .OR. ( .NOT. call_psolver_at_all_substeps  .AND.                     &
               intermediate_timestep_count == 1 ) )                            &
          THEN
             time_disturb = time_disturb + dt_3d
             IF ( time_disturb >= dt_disturb )  THEN
                IF ( hom(nzb+5,1,pr_palm,0) < disturbance_energy_limit )  THEN
                   CALL disturb_field( nzb_u_inner, tend, u )
                   CALL disturb_field( nzb_v_inner, tend, v )
                ELSEIF ( bc_lr /= 'cyclic'  .OR.  bc_ns /= 'cyclic' )  THEN
!
!--                Runs with a non-cyclic lateral wall need perturbations
!--                near the inflow throughout the whole simulation
                   dist_range = 1
                   CALL disturb_field( nzb_u_inner, tend, u )
                   CALL disturb_field( nzb_v_inner, tend, v )
                   dist_range = 0
                ENDIF
                time_disturb = time_disturb - dt_disturb
             ENDIF
          ENDIF

!
!--       Reduce the velocity divergence via the equation for perturbation
!--       pressure.
          IF ( intermediate_timestep_count == 1  .OR. &
                call_psolver_at_all_substeps )  THEN
             CALL pres
          ENDIF

!
!--       If required, compute virtuell potential temperature
          IF ( humidity ) CALL compute_vpt

!
!--       If required, compute liquid water content
          IF ( cloud_physics ) CALL calc_liquid_water_content

!
!--       Compute the diffusion quantities
          IF ( .NOT. constant_diffusion )  THEN

!
!--          First the vertical fluxes in the Prandtl layer are being computed
             IF ( prandtl_layer )  THEN
                CALL cpu_log( log_point(19), 'prandtl_fluxes', 'start' )
                CALL prandtl_fluxes
                CALL cpu_log( log_point(19), 'prandtl_fluxes', 'stop' )
             ENDIF

!
!--          Compute the diffusion coefficients
             CALL cpu_log( log_point(17), 'diffusivities', 'start' )
             IF ( .NOT. humidity ) THEN
                IF ( ocean )  THEN
                   CALL diffusivities( rho, prho_reference )
                ELSE
                   CALL diffusivities( pt, pt_reference )
                ENDIF
             ELSE
                CALL diffusivities( vpt, pt_reference )
             ENDIF
             CALL cpu_log( log_point(17), 'diffusivities', 'stop' )

          ENDIF

       ENDDO   ! Intermediate step loop

!
!--    Increase simulation time and output times
       current_timestep_number = current_timestep_number + 1
       simulated_time     = simulated_time   + dt_3d
       simulated_time_chr = time_to_string( simulated_time )
       IF ( simulated_time >= skip_time_data_output_av )  THEN
          time_do_av         = time_do_av       + dt_3d
       ENDIF
       IF ( simulated_time >= skip_time_do2d_xy )  THEN
          time_do2d_xy       = time_do2d_xy     + dt_3d
       ENDIF
       IF ( simulated_time >= skip_time_do2d_xz )  THEN
          time_do2d_xz       = time_do2d_xz     + dt_3d
       ENDIF
       IF ( simulated_time >= skip_time_do2d_yz )  THEN
          time_do2d_yz       = time_do2d_yz     + dt_3d
       ENDIF
       IF ( simulated_time >= skip_time_do3d    )  THEN
          time_do3d          = time_do3d        + dt_3d
       ENDIF
       time_dvrp          = time_dvrp        + dt_3d
       IF ( simulated_time >= skip_time_dosp )  THEN
          time_dosp       = time_dosp        + dt_3d
       ENDIF
       time_dots          = time_dots        + dt_3d
       IF ( .NOT. first_call_advec_particles )  THEN
          time_dopts      = time_dopts       + dt_3d
       ENDIF
       IF ( simulated_time >= skip_time_dopr )  THEN
          time_dopr       = time_dopr        + dt_3d
       ENDIF
       time_dopr_listing          = time_dopr_listing        + dt_3d
       time_run_control   = time_run_control + dt_3d

!
!--    Data exchange between coupled models
       IF ( coupling_mode /= 'uncoupled' )  THEN
          time_coupling = time_coupling + dt_3d
!
!--       In case of model termination initiated by the local model 
!--       (terminate_coupled > 0), the coupler must be skipped because it would 
!--       cause an MPI intercomminucation hang.
!--       If necessary, the coupler will be called at the beginning of the 
!--       next restart run.
          DO WHILE ( time_coupling >= dt_coupling .AND. terminate_coupled == 0 )
             CALL surface_coupler
             time_coupling = time_coupling - dt_coupling
          ENDDO
       ENDIF

!
!--    Execute user-defined actions
       CALL user_actions( 'after_integration' )

!
!--    If Galilei transformation is used, determine the distance that the
!--    model has moved so far
       IF ( galilei_transformation )  THEN
          advected_distance_x = advected_distance_x + u_gtrans * dt_3d
          advected_distance_y = advected_distance_y + v_gtrans * dt_3d
       ENDIF

!
!--    Check, if restart is necessary (because cpu-time is expiring or
!--    because it is forced by user) and set stop flag
!--    This call is skipped if the remote model has already initiated a restart.
       IF ( .NOT. terminate_run )  CALL check_for_restart

!
!--    Carry out statistical analysis and output at the requested output times.
!--    The MOD function is used for calculating the output time counters (like
!--    time_dopr) in order to regard a possible decrease of the output time
!--    interval in case of restart runs

!
!--    Set a flag indicating that so far no statistics have been created
!--    for this time step
       flow_statistics_called = .FALSE.

!
!--    If required, call flow_statistics for averaging in time
       IF ( averaging_interval_pr /= 0.0  .AND.  &
            ( dt_dopr - time_dopr ) <= averaging_interval_pr  .AND.  &
            simulated_time >= skip_time_dopr )  THEN
          time_dopr_av = time_dopr_av + dt_3d
          IF ( time_dopr_av >= dt_averaging_input_pr )  THEN
             do_sum = .TRUE.
             time_dopr_av = MOD( time_dopr_av, &
                                    MAX( dt_averaging_input_pr, dt_3d ) )
          ENDIF
       ENDIF
       IF ( do_sum )  CALL flow_statistics

!
!--    Sum-up 3d-arrays for later output of time-averaged data
       IF ( averaging_interval /= 0.0  .AND.                                &
            ( dt_data_output_av - time_do_av ) <= averaging_interval  .AND. &
            simulated_time >= skip_time_data_output_av )                    &
       THEN
          time_do_sla = time_do_sla + dt_3d
          IF ( time_do_sla >= dt_averaging_input )  THEN
             CALL sum_up_3d_data
             average_count_3d = average_count_3d + 1
             time_do_sla = MOD( time_do_sla, MAX( dt_averaging_input, dt_3d ) )
          ENDIF
       ENDIF

!
!--    Calculate spectra for time averaging
       IF ( averaging_interval_sp /= 0.0  .AND.  &
            ( dt_dosp - time_dosp ) <= averaging_interval_sp  .AND.  &
            simulated_time >= skip_time_dosp )  THEN
          time_dosp_av = time_dosp_av + dt_3d
          IF ( time_dosp_av >= dt_averaging_input_pr )  THEN
             CALL calc_spectra
             time_dosp_av = MOD( time_dosp_av, &
                                 MAX( dt_averaging_input_pr, dt_3d ) )
          ENDIF
       ENDIF

!
!--    Computation and output of run control parameters.
!--    This is also done whenever the time step has changed or perturbations
!--    have been imposed
       IF ( time_run_control >= dt_run_control  .OR.                     &
            ( dt_changed  .AND.  timestep_scheme(1:5) /= 'runge' )  .OR. &
            disturbance_created )                                        &
       THEN
          CALL run_control
          IF ( time_run_control >= dt_run_control )  THEN
             time_run_control = MOD( time_run_control, &
                                     MAX( dt_run_control, dt_3d ) )
          ENDIF
       ENDIF

!
!--    Profile output (ASCII) on file
       IF ( time_dopr_listing >= dt_dopr_listing )  THEN
          CALL print_1d
          time_dopr_listing = MOD( time_dopr_listing, MAX( dt_dopr_listing, &
                                                           dt_3d ) )
       ENDIF

!
!--    Graphic output for PROFIL
       IF ( time_dopr >= dt_dopr )  THEN
          IF ( dopr_n /= 0 )  CALL data_output_profiles
          time_dopr = MOD( time_dopr, MAX( dt_dopr, dt_3d ) )
          time_dopr_av = 0.0    ! due to averaging (see above)
       ENDIF

!
!--    Graphic output for time series
       IF ( time_dots >= dt_dots )  THEN
          CALL data_output_tseries
          time_dots = MOD( time_dots, MAX( dt_dots, dt_3d ) )
       ENDIF

!
!--    Output of spectra (formatted for use with PROFIL), in case of no
!--    time averaging, spectra has to be calculated before
       IF ( time_dosp >= dt_dosp )  THEN
          IF ( average_count_sp == 0 )  CALL calc_spectra
          CALL data_output_spectra
          time_dosp = MOD( time_dosp, MAX( dt_dosp, dt_3d ) )
       ENDIF

!
!--    2d-data output (cross-sections)
       IF ( time_do2d_xy >= dt_do2d_xy )  THEN
          CALL data_output_2d( 'xy', 0 )
          time_do2d_xy = MOD( time_do2d_xy, MAX( dt_do2d_xy, dt_3d ) )
       ENDIF
       IF ( time_do2d_xz >= dt_do2d_xz )  THEN
          CALL data_output_2d( 'xz', 0 )
          time_do2d_xz = MOD( time_do2d_xz, MAX( dt_do2d_xz, dt_3d ) )
       ENDIF
       IF ( time_do2d_yz >= dt_do2d_yz )  THEN
          CALL data_output_2d( 'yz', 0 )
          time_do2d_yz = MOD( time_do2d_yz, MAX( dt_do2d_yz, dt_3d ) )
       ENDIF

!
!--    3d-data output (volume data)
       IF ( time_do3d >= dt_do3d )  THEN
          CALL data_output_3d( 0 )
          time_do3d = MOD( time_do3d, MAX( dt_do3d, dt_3d ) )
       ENDIF

!
!--    Output of time-averaged 2d/3d-data
       IF ( time_do_av >= dt_data_output_av )  THEN
          CALL average_3d_data
          CALL data_output_2d( 'xy', 1 )
          CALL data_output_2d( 'xz', 1 )
          CALL data_output_2d( 'yz', 1 )
          CALL data_output_3d( 1 )
          time_do_av = MOD( time_do_av, MAX( dt_data_output_av, dt_3d ) )
       ENDIF

!
!--    Output of particle time series
       IF ( time_dopts >= dt_dopts  .OR. &
            ( simulated_time >= particle_advection_start  .AND. &
              first_call_advec_particles ) )  THEN
          CALL data_output_ptseries
          time_dopts = MOD( time_dopts, MAX( dt_dopts, dt_3d ) )
       ENDIF

!
!--    Output of dvrp-graphics (isosurface, particles, slicer)
#if defined( __dvrp_graphics )
       CALL DVRP_LOG_EVENT( -2, current_timestep_number-1 )
#endif
       IF ( time_dvrp >= dt_dvrp )  THEN
          CALL data_output_dvrp
          time_dvrp = MOD( time_dvrp, MAX( dt_dvrp, dt_3d ) )
       ENDIF
#if defined( __dvrp_graphics )
       CALL DVRP_LOG_EVENT( 2, current_timestep_number )
#endif

!
!--    If required, set the heat flux for the next time step at a random value
       IF ( constant_heatflux  .AND.  random_heatflux )  CALL disturb_heatflux

!
!--    Execute user-defined actions
       CALL user_actions( 'after_timestep' )

       CALL cpu_log( log_point_s(10), 'timesteps', 'stop' )

    ENDDO   ! time loop

#if defined( __dvrp_graphics )
    CALL DVRP_LOG_EVENT( -2, current_timestep_number )
#endif

 END SUBROUTINE time_integration