Home

Context Navigation

source: palm/trunk/SOURCE/sum_up_3d_data.f90 @ 2026

Last change on this file since 2026 was 2025, checked in by kanani, 8 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 25.0 KB

Line
1	!> @file sum_up_3d_data.f90
2	!------------------------------------------------------------------------------!
3	! This file is part of PALM.
4	!
5	! PALM is free software: you can redistribute it and/or modify it under the
6	! terms of the GNU General Public License as published by the Free Software
7	! Foundation, either version 3 of the License, or (at your option) any later
8	! version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2016 Leibniz Universitaet Hannover
18	!------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: sum_up_3d_data.f90 2025 2016-10-12 16:44:03Z suehring $
27	!
28	! 2024 2016-10-12 16:42:37Z kanani
29	! Added missing CASE for ssws*
30	!
31	! 2011 2016-09-19 17:29:57Z kanani
32	! Flag urban_surface is now defined in module control_parameters,
33	! changed prefix for urban surface model output to "usm_",
34	! introduced control parameter varnamelength for LEN of trimvar.
35	!
36	! 2007 2016-08-24 15:47:17Z kanani
37	! Added support for new urban surface model (temporary modifications of
38	! SELECT CASE ( ) necessary, see variable trimvar),
39	! added comments in variable declaration section
40	!
41	! 2000 2016-08-20 18:09:15Z knoop
42	! Forced header and separation lines into 80 columns
43	!
44	! 1992 2016-08-12 15:14:59Z suehring
45	! Bugfix in summation of passive scalar
46	!
47	! 1976 2016-07-27 13:28:04Z maronga
48	! Radiation actions are now done directly in the respective module
49	!
50	! 1972 2016-07-26 07:52:02Z maronga
51	! Land surface actions are now done directly in the respective module
52	!
53	! 1960 2016-07-12 16:34:24Z suehring
54	! Scalar surface flux added
55	!
56	! 1949 2016-06-17 07:19:16Z maronga
57	! Bugfix: calculation of lai_av, c_veg_av and c_liq_av.
58	!
59	! 1849 2016-04-08 11:33:18Z hoffmann
60	! precipitation_rate moved to arrays_3d
61	!
62	! 1788 2016-03-10 11:01:04Z maronga
63	! Added z0q and z0q_av
64	!
65	! 1693 2015-10-27 08:35:45Z maronga
66	! Last revision text corrected
67	!
68	! 1691 2015-10-26 16:17:44Z maronga
69	! Added output of Obukhov length and radiative heating rates for RRTMG.
70	! Corrected output of liquid water path.
71	!
72	! 1682 2015-10-07 23:56:08Z knoop
73	! Code annotations made doxygen readable
74	!
75	! 1585 2015-04-30 07:05:52Z maronga
76	! Adapted for RRTMG
77	!
78	! 1555 2015-03-04 17:44:27Z maronga
79	! Added output of r_a and r_s
80	!
81	! 1551 2015-03-03 14:18:16Z maronga
82	! Added support for land surface model and radiation model data.
83	!
84	! 1359 2014-04-11 17:15:14Z hoffmann
85	! New particle structure integrated.
86	!
87	! 1353 2014-04-08 15:21:23Z heinze
88	! REAL constants provided with KIND-attribute
89	!
90	! 1320 2014-03-20 08:40:49Z raasch
91	! ONLY-attribute added to USE-statements,
92	! kind-parameters added to all INTEGER and REAL declaration statements,
93	! kinds are defined in new module kinds,
94	! old module precision_kind is removed,
95	! revision history before 2012 removed,
96	! comment fields (!:) to be used for variable explanations added to
97	! all variable declaration statements
98	!
99	! 1318 2014-03-17 13:35:16Z raasch
100	! barrier argument removed from cpu_log,
101	! module interfaces removed
102	!
103	! 1115 2013-03-26 18:16:16Z hoffmann
104	! ql is calculated by calc_liquid_water_content
105	!
106	! 1053 2012-11-13 17:11:03Z hoffmann
107	! +nr, prr, qr
108	!
109	! 1036 2012-10-22 13:43:42Z raasch
110	! code put under GPL (PALM 3.9)
111	!
112	! 1007 2012-09-19 14:30:36Z franke
113	! Bugfix in calculation of ql_vp
114	!
115	! 978 2012-08-09 08:28:32Z fricke
116	! +z0h*
117	!
118	! Revision 1.1 2006/02/23 12:55:23 raasch
119	! Initial revision
120	!
121	!
122	! Description:
123	! ------------
124	!> Sum-up the values of 3d-arrays. The real averaging is later done in routine
125	!> average_3d_data.
126	!------------------------------------------------------------------------------!
127	SUBROUTINE sum_up_3d_data
128
129
130	USE arrays_3d, &
131	ONLY: dzw, e, nr, ol, p, pt, precipitation_rate, q, qc, ql, ql_c, &
132	ql_v, qr, qsws, rho, s, sa, shf, ssws, ts, u, us, v, vpt, w, z0,&
133	z0h, z0q
134
135	USE averaging, &
136	ONLY: e_av, lpt_av, lwp_av, nr_av, ol_av, p_av, pc_av, pr_av, prr_av, &
137	precipitation_rate_av, pt_av, q_av, qc_av, ql_av, ql_c_av, &
138	ql_v_av, ql_vp_av, qr_av, qsws_av, qv_av, rho_av, s_av, sa_av, &
139	shf_av, ssws_av, ts_av, u_av, us_av, v_av, vpt_av, w_av, z0_av, &
140	z0h_av, z0q_av
141
142	USE cloud_parameters, &
143	ONLY: l_d_cp, pt_d_t
144
145	USE control_parameters, &
146	ONLY: average_count_3d, cloud_physics, doav, doav_n, rho_surface, &
147	urban_surface, varnamelength
148
149	USE cpulog, &
150	ONLY: cpu_log, log_point
151
152	USE indices, &
153	ONLY: nxl, nxlg, nxr, nxrg, nyn, nyng, nys, nysg, nzb, nzt
154
155	USE kinds
156
157	USE land_surface_model_mod, &
158	ONLY: land_surface, lsm_3d_data_averaging
159
160	USE particle_attributes, &
161	ONLY: grid_particles, number_of_particles, particles, prt_count
162
163	USE radiation_model_mod, &
164	ONLY: radiation, radiation_3d_data_averaging
165
166	USE urban_surface_mod, &
167	ONLY: usm_average_3d_data
168
169
170	IMPLICIT NONE
171
172	INTEGER(iwp) :: i !< running index
173	INTEGER(iwp) :: ii !< running index
174	INTEGER(iwp) :: j !< running index
175	INTEGER(iwp) :: k !< running index
176	INTEGER(iwp) :: n !<
177
178	REAL(wp) :: mean_r !<
179	REAL(wp) :: s_r2 !<
180	REAL(wp) :: s_r3 !<
181
182	CHARACTER (LEN=varnamelength) :: trimvar !< TRIM of output-variable string
183
184
185	CALL cpu_log (log_point(34),'sum_up_3d_data','start')
186
187	!
188	!-- Allocate and initialize the summation arrays if called for the very first
189	!-- time or the first time after average_3d_data has been called
190	!-- (some or all of the arrays may have been already allocated
191	!-- in read_3d_binary)
192	IF ( average_count_3d == 0 ) THEN
193
194	DO ii = 1, doav_n
195	!
196	!-- Temporary solution to account for data output within the new urban
197	!-- surface model (urban_surface_mod.f90), see also SELECT CASE ( trimvar )
198	trimvar = TRIM( doav(ii) )
199	IF ( urban_surface .AND. trimvar(1:4) == 'usm_' ) THEN
200	trimvar = 'usm_output'
201	ENDIF
202
203	SELECT CASE ( trimvar )
204
205	CASE ( 'e' )
206	IF ( .NOT. ALLOCATED( e_av ) ) THEN
207	ALLOCATE( e_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
208	ENDIF
209	e_av = 0.0_wp
210
211	CASE ( 'lpt' )
212	IF ( .NOT. ALLOCATED( lpt_av ) ) THEN
213	ALLOCATE( lpt_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
214	ENDIF
215	lpt_av = 0.0_wp
216
217	CASE ( 'lwp*' )
218	IF ( .NOT. ALLOCATED( lwp_av ) ) THEN
219	ALLOCATE( lwp_av(nysg:nyng,nxlg:nxrg) )
220	ENDIF
221	lwp_av = 0.0_wp
222
223	CASE ( 'nr' )
224	IF ( .NOT. ALLOCATED( nr_av ) ) THEN
225	ALLOCATE( nr_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
226	ENDIF
227	nr_av = 0.0_wp
228
229	CASE ( 'ol*' )
230	IF ( .NOT. ALLOCATED( ol_av ) ) THEN
231	ALLOCATE( ol_av(nysg:nyng,nxlg:nxrg) )
232	ENDIF
233	ol_av = 0.0_wp
234
235	CASE ( 'p' )
236	IF ( .NOT. ALLOCATED( p_av ) ) THEN
237	ALLOCATE( p_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
238	ENDIF
239	p_av = 0.0_wp
240
241	CASE ( 'pc' )
242	IF ( .NOT. ALLOCATED( pc_av ) ) THEN
243	ALLOCATE( pc_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
244	ENDIF
245	pc_av = 0.0_wp
246
247	CASE ( 'pr' )
248	IF ( .NOT. ALLOCATED( pr_av ) ) THEN
249	ALLOCATE( pr_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
250	ENDIF
251	pr_av = 0.0_wp
252
253	CASE ( 'prr' )
254	IF ( .NOT. ALLOCATED( prr_av ) ) THEN
255	ALLOCATE( prr_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
256	ENDIF
257	prr_av = 0.0_wp
258
259	CASE ( 'prr*' )
260	IF ( .NOT. ALLOCATED( precipitation_rate_av ) ) THEN
261	ALLOCATE( precipitation_rate_av(nysg:nyng,nxlg:nxrg) )
262	ENDIF
263	precipitation_rate_av = 0.0_wp
264
265	CASE ( 'pt' )
266	IF ( .NOT. ALLOCATED( pt_av ) ) THEN
267	ALLOCATE( pt_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
268	ENDIF
269	pt_av = 0.0_wp
270
271	CASE ( 'q' )
272	IF ( .NOT. ALLOCATED( q_av ) ) THEN
273	ALLOCATE( q_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
274	ENDIF
275	q_av = 0.0_wp
276
277	CASE ( 'qc' )
278	IF ( .NOT. ALLOCATED( qc_av ) ) THEN
279	ALLOCATE( qc_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
280	ENDIF
281	qc_av = 0.0_wp
282
283	CASE ( 'ql' )
284	IF ( .NOT. ALLOCATED( ql_av ) ) THEN
285	ALLOCATE( ql_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
286	ENDIF
287	ql_av = 0.0_wp
288
289	CASE ( 'ql_c' )
290	IF ( .NOT. ALLOCATED( ql_c_av ) ) THEN
291	ALLOCATE( ql_c_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
292	ENDIF
293	ql_c_av = 0.0_wp
294
295	CASE ( 'ql_v' )
296	IF ( .NOT. ALLOCATED( ql_v_av ) ) THEN
297	ALLOCATE( ql_v_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
298	ENDIF
299	ql_v_av = 0.0_wp
300
301	CASE ( 'ql_vp' )
302	IF ( .NOT. ALLOCATED( ql_vp_av ) ) THEN
303	ALLOCATE( ql_vp_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
304	ENDIF
305	ql_vp_av = 0.0_wp
306
307	CASE ( 'qr' )
308	IF ( .NOT. ALLOCATED( qr_av ) ) THEN
309	ALLOCATE( qr_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
310	ENDIF
311	qr_av = 0.0_wp
312
313	CASE ( 'qsws*' )
314	IF ( .NOT. ALLOCATED( qsws_av ) ) THEN
315	ALLOCATE( qsws_av(nysg:nyng,nxlg:nxrg) )
316	ENDIF
317	qsws_av = 0.0_wp
318
319	CASE ( 'qv' )
320	IF ( .NOT. ALLOCATED( qv_av ) ) THEN
321	ALLOCATE( qv_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
322	ENDIF
323	qv_av = 0.0_wp
324
325	CASE ( 'rho' )
326	IF ( .NOT. ALLOCATED( rho_av ) ) THEN
327	ALLOCATE( rho_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
328	ENDIF
329	rho_av = 0.0_wp
330
331	CASE ( 's' )
332	IF ( .NOT. ALLOCATED( s_av ) ) THEN
333	ALLOCATE( s_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
334	ENDIF
335	s_av = 0.0_wp
336
337	CASE ( 'sa' )
338	IF ( .NOT. ALLOCATED( sa_av ) ) THEN
339	ALLOCATE( sa_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
340	ENDIF
341	sa_av = 0.0_wp
342
343	CASE ( 'shf*' )
344	IF ( .NOT. ALLOCATED( shf_av ) ) THEN
345	ALLOCATE( shf_av(nysg:nyng,nxlg:nxrg) )
346	ENDIF
347	shf_av = 0.0_wp
348
349	CASE ( 'ssws*' )
350	IF ( .NOT. ALLOCATED( ssws_av ) ) THEN
351	ALLOCATE( ssws_av(nysg:nyng,nxlg:nxrg) )
352	ENDIF
353	ssws_av = 0.0_wp
354
355	CASE ( 't*' )
356	IF ( .NOT. ALLOCATED( ts_av ) ) THEN
357	ALLOCATE( ts_av(nysg:nyng,nxlg:nxrg) )
358	ENDIF
359	ts_av = 0.0_wp
360
361	CASE ( 'u' )
362	IF ( .NOT. ALLOCATED( u_av ) ) THEN
363	ALLOCATE( u_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
364	ENDIF
365	u_av = 0.0_wp
366
367	CASE ( 'u*' )
368	IF ( .NOT. ALLOCATED( us_av ) ) THEN
369	ALLOCATE( us_av(nysg:nyng,nxlg:nxrg) )
370	ENDIF
371	us_av = 0.0_wp
372
373	CASE ( 'v' )
374	IF ( .NOT. ALLOCATED( v_av ) ) THEN
375	ALLOCATE( v_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
376	ENDIF
377	v_av = 0.0_wp
378
379	CASE ( 'vpt' )
380	IF ( .NOT. ALLOCATED( vpt_av ) ) THEN
381	ALLOCATE( vpt_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
382	ENDIF
383	vpt_av = 0.0_wp
384
385	CASE ( 'w' )
386	IF ( .NOT. ALLOCATED( w_av ) ) THEN
387	ALLOCATE( w_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
388	ENDIF
389	w_av = 0.0_wp
390
391	CASE ( 'z0*' )
392	IF ( .NOT. ALLOCATED( z0_av ) ) THEN
393	ALLOCATE( z0_av(nysg:nyng,nxlg:nxrg) )
394	ENDIF
395	z0_av = 0.0_wp
396
397	CASE ( 'z0h*' )
398	IF ( .NOT. ALLOCATED( z0h_av ) ) THEN
399	ALLOCATE( z0h_av(nysg:nyng,nxlg:nxrg) )
400	ENDIF
401	z0h_av = 0.0_wp
402
403	CASE ( 'z0q*' )
404	IF ( .NOT. ALLOCATED( z0q_av ) ) THEN
405	ALLOCATE( z0q_av(nysg:nyng,nxlg:nxrg) )
406	ENDIF
407	z0q_av = 0.0_wp
408	!
409	!-- Block of urban surface model outputs
410	CASE ( 'usm_output' )
411
412	CALL usm_average_3d_data( 'allocate', doav(ii) )
413
414
415	CASE DEFAULT
416
417	!
418	!-- Land surface quantity
419	IF ( land_surface ) THEN
420	CALL lsm_3d_data_averaging( 'allocate', doav(ii) )
421	ENDIF
422
423	!
424	!-- Radiation quantity
425	IF ( radiation ) THEN
426	CALL radiation_3d_data_averaging( 'allocate', doav(ii) )
427	ENDIF
428
429	!
430	!-- User-defined quantity
431	CALL user_3d_data_averaging( 'allocate', doav(ii) )
432
433	END SELECT
434
435	ENDDO
436
437	ENDIF
438
439	!
440	!-- Loop of all variables to be averaged.
441	DO ii = 1, doav_n
442	!
443	!-- Temporary solution to account for data output within the new urban
444	!-- surface model (urban_surface_mod.f90), see also SELECT CASE ( trimvar )
445	trimvar = TRIM( doav(ii) )
446	IF ( urban_surface .AND. trimvar(1:4) == 'usm_' ) THEN
447	trimvar = 'usm_output'
448	ENDIF
449	!
450	!-- Store the array chosen on the temporary array.
451	SELECT CASE ( trimvar )
452
453	CASE ( 'e' )
454	DO i = nxlg, nxrg
455	DO j = nysg, nyng
456	DO k = nzb, nzt+1
457	e_av(k,j,i) = e_av(k,j,i) + e(k,j,i)
458	ENDDO
459	ENDDO
460	ENDDO
461
462	CASE ( 'lpt' )
463	DO i = nxlg, nxrg
464	DO j = nysg, nyng
465	DO k = nzb, nzt+1
466	lpt_av(k,j,i) = lpt_av(k,j,i) + pt(k,j,i)
467	ENDDO
468	ENDDO
469	ENDDO
470
471	CASE ( 'lwp*' )
472	DO i = nxlg, nxrg
473	DO j = nysg, nyng
474	lwp_av(j,i) = lwp_av(j,i) + SUM( ql(nzb:nzt,j,i) &
475	* dzw(1:nzt+1) ) * rho_surface
476	ENDDO
477	ENDDO
478
479	CASE ( 'nr' )
480	DO i = nxlg, nxrg
481	DO j = nysg, nyng
482	DO k = nzb, nzt+1
483	nr_av(k,j,i) = nr_av(k,j,i) + nr(k,j,i)
484	ENDDO
485	ENDDO
486	ENDDO
487
488	CASE ( 'ol*' )
489	DO i = nxlg, nxrg
490	DO j = nysg, nyng
491	ol_av(j,i) = ol_av(j,i) + ol(j,i)
492	ENDDO
493	ENDDO
494
495	CASE ( 'p' )
496	DO i = nxlg, nxrg
497	DO j = nysg, nyng
498	DO k = nzb, nzt+1
499	p_av(k,j,i) = p_av(k,j,i) + p(k,j,i)
500	ENDDO
501	ENDDO
502	ENDDO
503
504	CASE ( 'pc' )
505	DO i = nxl, nxr
506	DO j = nys, nyn
507	DO k = nzb, nzt+1
508	pc_av(k,j,i) = pc_av(k,j,i) + prt_count(k,j,i)
509	ENDDO
510	ENDDO
511	ENDDO
512
513	CASE ( 'pr' )
514	DO i = nxl, nxr
515	DO j = nys, nyn
516	DO k = nzb, nzt+1
517	number_of_particles = prt_count(k,j,i)
518	IF ( number_of_particles <= 0 ) CYCLE
519	particles => grid_particles(k,j,i)%particles(1:number_of_particles)
520	s_r2 = 0.0_wp
521	s_r3 = 0.0_wp
522
523	DO n = 1, number_of_particles
524	IF ( particles(n)%particle_mask ) THEN
525	s_r2 = s_r2 + particles(n)%radius*2 &
526	particles(n)%weight_factor
527	s_r3 = s_r3 + particles(n)%radius*3 &
528	particles(n)%weight_factor
529	ENDIF
530	ENDDO
531
532	IF ( s_r2 > 0.0_wp ) THEN
533	mean_r = s_r3 / s_r2
534	ELSE
535	mean_r = 0.0_wp
536	ENDIF
537	pr_av(k,j,i) = pr_av(k,j,i) + mean_r
538	ENDDO
539	ENDDO
540	ENDDO
541
542
543	CASE ( 'pr*' )
544	DO i = nxlg, nxrg
545	DO j = nysg, nyng
546	precipitation_rate_av(j,i) = precipitation_rate_av(j,i) + &
547	precipitation_rate(j,i)
548	ENDDO
549	ENDDO
550
551	CASE ( 'pt' )
552	IF ( .NOT. cloud_physics ) THEN
553	DO i = nxlg, nxrg
554	DO j = nysg, nyng
555	DO k = nzb, nzt+1
556	pt_av(k,j,i) = pt_av(k,j,i) + pt(k,j,i)
557	ENDDO
558	ENDDO
559	ENDDO
560	ELSE
561	DO i = nxlg, nxrg
562	DO j = nysg, nyng
563	DO k = nzb, nzt+1
564	pt_av(k,j,i) = pt_av(k,j,i) + pt(k,j,i) + l_d_cp * &
565	pt_d_t(k) * ql(k,j,i)
566	ENDDO
567	ENDDO
568	ENDDO
569	ENDIF
570
571	CASE ( 'q' )
572	DO i = nxlg, nxrg
573	DO j = nysg, nyng
574	DO k = nzb, nzt+1
575	q_av(k,j,i) = q_av(k,j,i) + q(k,j,i)
576	ENDDO
577	ENDDO
578	ENDDO
579
580	CASE ( 'qc' )
581	DO i = nxlg, nxrg
582	DO j = nysg, nyng
583	DO k = nzb, nzt+1
584	qc_av(k,j,i) = qc_av(k,j,i) + qc(k,j,i)
585	ENDDO
586	ENDDO
587	ENDDO
588
589	CASE ( 'ql' )
590	DO i = nxlg, nxrg
591	DO j = nysg, nyng
592	DO k = nzb, nzt+1
593	ql_av(k,j,i) = ql_av(k,j,i) + ql(k,j,i)
594	ENDDO
595	ENDDO
596	ENDDO
597
598	CASE ( 'ql_c' )
599	DO i = nxlg, nxrg
600	DO j = nysg, nyng
601	DO k = nzb, nzt+1
602	ql_c_av(k,j,i) = ql_c_av(k,j,i) + ql_c(k,j,i)
603	ENDDO
604	ENDDO
605	ENDDO
606
607	CASE ( 'ql_v' )
608	DO i = nxlg, nxrg
609	DO j = nysg, nyng
610	DO k = nzb, nzt+1
611	ql_v_av(k,j,i) = ql_v_av(k,j,i) + ql_v(k,j,i)
612	ENDDO
613	ENDDO
614	ENDDO
615
616	CASE ( 'ql_vp' )
617	DO i = nxl, nxr
618	DO j = nys, nyn
619	DO k = nzb, nzt+1
620	number_of_particles = prt_count(k,j,i)
621	IF ( number_of_particles <= 0 ) CYCLE
622	particles => grid_particles(k,j,i)%particles(1:number_of_particles)
623	DO n = 1, number_of_particles
624	IF ( particles(n)%particle_mask ) THEN
625	ql_vp_av(k,j,i) = ql_vp_av(k,j,i) + &
626	particles(n)%weight_factor / &
627	number_of_particles
628	ENDIF
629	ENDDO
630	ENDDO
631	ENDDO
632	ENDDO
633
634	CASE ( 'qr' )
635	DO i = nxlg, nxrg
636	DO j = nysg, nyng
637	DO k = nzb, nzt+1
638	qr_av(k,j,i) = qr_av(k,j,i) + qr(k,j,i)
639	ENDDO
640	ENDDO
641	ENDDO
642
643	CASE ( 'qsws*' )
644	DO i = nxlg, nxrg
645	DO j = nysg, nyng
646	qsws_av(j,i) = qsws_av(j,i) + qsws(j,i)
647	ENDDO
648	ENDDO
649
650	CASE ( 'qv' )
651	DO i = nxlg, nxrg
652	DO j = nysg, nyng
653	DO k = nzb, nzt+1
654	qv_av(k,j,i) = qv_av(k,j,i) + q(k,j,i) - ql(k,j,i)
655	ENDDO
656	ENDDO
657	ENDDO
658
659	CASE ( 'rho' )
660	DO i = nxlg, nxrg
661	DO j = nysg, nyng
662	DO k = nzb, nzt+1
663	rho_av(k,j,i) = rho_av(k,j,i) + rho(k,j,i)
664	ENDDO
665	ENDDO
666	ENDDO
667
668	CASE ( 's' )
669	DO i = nxlg, nxrg
670	DO j = nysg, nyng
671	DO k = nzb, nzt+1
672	s_av(k,j,i) = s_av(k,j,i) + s(k,j,i)
673	ENDDO
674	ENDDO
675	ENDDO
676
677	CASE ( 'sa' )
678	DO i = nxlg, nxrg
679	DO j = nysg, nyng
680	DO k = nzb, nzt+1
681	sa_av(k,j,i) = sa_av(k,j,i) + sa(k,j,i)
682	ENDDO
683	ENDDO
684	ENDDO
685
686	CASE ( 'shf*' )
687	DO i = nxlg, nxrg
688	DO j = nysg, nyng
689	shf_av(j,i) = shf_av(j,i) + shf(j,i)
690	ENDDO
691	ENDDO
692
693	CASE ( 'ssws*' )
694	DO i = nxlg, nxrg
695	DO j = nysg, nyng
696	ssws_av(j,i) = ssws_av(j,i) + ssws(j,i)
697	ENDDO
698	ENDDO
699
700	CASE ( 't*' )
701	DO i = nxlg, nxrg
702	DO j = nysg, nyng
703	ts_av(j,i) = ts_av(j,i) + ts(j,i)
704	ENDDO
705	ENDDO
706
707	CASE ( 'u' )
708	DO i = nxlg, nxrg
709	DO j = nysg, nyng
710	DO k = nzb, nzt+1
711	u_av(k,j,i) = u_av(k,j,i) + u(k,j,i)
712	ENDDO
713	ENDDO
714	ENDDO
715
716	CASE ( 'u*' )
717	DO i = nxlg, nxrg
718	DO j = nysg, nyng
719	us_av(j,i) = us_av(j,i) + us(j,i)
720	ENDDO
721	ENDDO
722
723	CASE ( 'v' )
724	DO i = nxlg, nxrg
725	DO j = nysg, nyng
726	DO k = nzb, nzt+1
727	v_av(k,j,i) = v_av(k,j,i) + v(k,j,i)
728	ENDDO
729	ENDDO
730	ENDDO
731
732	CASE ( 'vpt' )
733	DO i = nxlg, nxrg
734	DO j = nysg, nyng
735	DO k = nzb, nzt+1
736	vpt_av(k,j,i) = vpt_av(k,j,i) + vpt(k,j,i)
737	ENDDO
738	ENDDO
739	ENDDO
740
741	CASE ( 'w' )
742	DO i = nxlg, nxrg
743	DO j = nysg, nyng
744	DO k = nzb, nzt+1
745	w_av(k,j,i) = w_av(k,j,i) + w(k,j,i)
746	ENDDO
747	ENDDO
748	ENDDO
749
750	CASE ( 'z0*' )
751	DO i = nxlg, nxrg
752	DO j = nysg, nyng
753	z0_av(j,i) = z0_av(j,i) + z0(j,i)
754	ENDDO
755	ENDDO
756
757	CASE ( 'z0h*' )
758	DO i = nxlg, nxrg
759	DO j = nysg, nyng
760	z0h_av(j,i) = z0h_av(j,i) + z0h(j,i)
761	ENDDO
762	ENDDO
763
764	CASE ( 'z0q*' )
765	DO i = nxlg, nxrg
766	DO j = nysg, nyng
767	z0q_av(j,i) = z0q_av(j,i) + z0q(j,i)
768	ENDDO
769	ENDDO
770	!
771	!-- Block of urban surface model outputs
772	CASE ( 'usm_output' )
773	CALL usm_average_3d_data( 'sum', doav(ii) )
774
775	CASE DEFAULT
776	!
777	!-- Land surface quantity
778	IF ( land_surface ) THEN
779	CALL lsm_3d_data_averaging( 'sum', doav(ii) )
780	ENDIF
781
782	!
783	!-- Radiation quantity
784	IF ( radiation ) THEN
785	CALL radiation_3d_data_averaging( 'sum', doav(ii) )
786	ENDIF
787
788	!
789	!-- User-defined quantity
790	CALL user_3d_data_averaging( 'sum', doav(ii) )
791
792	END SELECT
793
794	ENDDO
795
796	CALL cpu_log( log_point(34), 'sum_up_3d_data', 'stop' )
797
798
799	END SUBROUTINE sum_up_3d_data

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |