Home

Context Navigation

source: palm/trunk/SOURCE/sum_up_3d_data.f90 @ 2014

Last change on this file since 2014 was 2012, checked in by kanani, 8 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 24.7 KB

Line
1	!> @file sum_up_3d_data.f90
2	!------------------------------------------------------------------------------!
3	! This file is part of PALM.
4	!
5	! PALM is free software: you can redistribute it and/or modify it under the
6	! terms of the GNU General Public License as published by the Free Software
7	! Foundation, either version 3 of the License, or (at your option) any later
8	! version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2016 Leibniz Universitaet Hannover
18	!------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: sum_up_3d_data.f90 2012 2016-09-19 17:31:38Z suehring $
27	!
28	! 2011 2016-09-19 17:29:57Z kanani
29	! Flag urban_surface is now defined in module control_parameters,
30	! changed prefix for urban surface model output to "usm_",
31	! introduced control parameter varnamelength for LEN of trimvar.
32	!
33	! 2007 2016-08-24 15:47:17Z kanani
34	! Added support for new urban surface model (temporary modifications of
35	! SELECT CASE ( ) necessary, see variable trimvar),
36	! added comments in variable declaration section
37	!
38	! 2000 2016-08-20 18:09:15Z knoop
39	! Forced header and separation lines into 80 columns
40	!
41	! 1992 2016-08-12 15:14:59Z suehring
42	! Bugfix in summation of passive scalar
43	!
44	! 1976 2016-07-27 13:28:04Z maronga
45	! Radiation actions are now done directly in the respective module
46	!
47	! 1972 2016-07-26 07:52:02Z maronga
48	! Land surface actions are now done directly in the respective module
49	!
50	! 1960 2016-07-12 16:34:24Z suehring
51	! Scalar surface flux added
52	!
53	! 1949 2016-06-17 07:19:16Z maronga
54	! Bugfix: calculation of lai_av, c_veg_av and c_liq_av.
55	!
56	! 1849 2016-04-08 11:33:18Z hoffmann
57	! precipitation_rate moved to arrays_3d
58	!
59	! 1788 2016-03-10 11:01:04Z maronga
60	! Added z0q and z0q_av
61	!
62	! 1693 2015-10-27 08:35:45Z maronga
63	! Last revision text corrected
64	!
65	! 1691 2015-10-26 16:17:44Z maronga
66	! Added output of Obukhov length and radiative heating rates for RRTMG.
67	! Corrected output of liquid water path.
68	!
69	! 1682 2015-10-07 23:56:08Z knoop
70	! Code annotations made doxygen readable
71	!
72	! 1585 2015-04-30 07:05:52Z maronga
73	! Adapted for RRTMG
74	!
75	! 1555 2015-03-04 17:44:27Z maronga
76	! Added output of r_a and r_s
77	!
78	! 1551 2015-03-03 14:18:16Z maronga
79	! Added support for land surface model and radiation model data.
80	!
81	! 1359 2014-04-11 17:15:14Z hoffmann
82	! New particle structure integrated.
83	!
84	! 1353 2014-04-08 15:21:23Z heinze
85	! REAL constants provided with KIND-attribute
86	!
87	! 1320 2014-03-20 08:40:49Z raasch
88	! ONLY-attribute added to USE-statements,
89	! kind-parameters added to all INTEGER and REAL declaration statements,
90	! kinds are defined in new module kinds,
91	! old module precision_kind is removed,
92	! revision history before 2012 removed,
93	! comment fields (!:) to be used for variable explanations added to
94	! all variable declaration statements
95	!
96	! 1318 2014-03-17 13:35:16Z raasch
97	! barrier argument removed from cpu_log,
98	! module interfaces removed
99	!
100	! 1115 2013-03-26 18:16:16Z hoffmann
101	! ql is calculated by calc_liquid_water_content
102	!
103	! 1053 2012-11-13 17:11:03Z hoffmann
104	! +nr, prr, qr
105	!
106	! 1036 2012-10-22 13:43:42Z raasch
107	! code put under GPL (PALM 3.9)
108	!
109	! 1007 2012-09-19 14:30:36Z franke
110	! Bugfix in calculation of ql_vp
111	!
112	! 978 2012-08-09 08:28:32Z fricke
113	! +z0h*
114	!
115	! Revision 1.1 2006/02/23 12:55:23 raasch
116	! Initial revision
117	!
118	!
119	! Description:
120	! ------------
121	!> Sum-up the values of 3d-arrays. The real averaging is later done in routine
122	!> average_3d_data.
123	!------------------------------------------------------------------------------!
124	SUBROUTINE sum_up_3d_data
125
126
127	USE arrays_3d, &
128	ONLY: dzw, e, nr, ol, p, pt, precipitation_rate, q, qc, ql, ql_c, &
129	ql_v, qr, qsws, rho, s, sa, shf, ssws, ts, u, us, v, vpt, w, z0,&
130	z0h, z0q
131
132	USE averaging, &
133	ONLY: e_av, lpt_av, lwp_av, nr_av, ol_av, p_av, pc_av, pr_av, prr_av, &
134	precipitation_rate_av, pt_av, q_av, qc_av, ql_av, ql_c_av, &
135	ql_v_av, ql_vp_av, qr_av, qsws_av, qv_av, rho_av, s_av, sa_av, &
136	shf_av, ssws_av, ts_av, u_av, us_av, v_av, vpt_av, w_av, z0_av, &
137	z0h_av, z0q_av
138
139	USE cloud_parameters, &
140	ONLY: l_d_cp, pt_d_t
141
142	USE control_parameters, &
143	ONLY: average_count_3d, cloud_physics, doav, doav_n, rho_surface, &
144	urban_surface, varnamelength
145
146	USE cpulog, &
147	ONLY: cpu_log, log_point
148
149	USE indices, &
150	ONLY: nxl, nxlg, nxr, nxrg, nyn, nyng, nys, nysg, nzb, nzt
151
152	USE kinds
153
154	USE land_surface_model_mod, &
155	ONLY: land_surface, lsm_3d_data_averaging
156
157	USE particle_attributes, &
158	ONLY: grid_particles, number_of_particles, particles, prt_count
159
160	USE radiation_model_mod, &
161	ONLY: radiation, radiation_3d_data_averaging
162
163	USE urban_surface_mod, &
164	ONLY: usm_average_3d_data
165
166
167	IMPLICIT NONE
168
169	INTEGER(iwp) :: i !< running index
170	INTEGER(iwp) :: ii !< running index
171	INTEGER(iwp) :: j !< running index
172	INTEGER(iwp) :: k !< running index
173	INTEGER(iwp) :: n !<
174
175	REAL(wp) :: mean_r !<
176	REAL(wp) :: s_r2 !<
177	REAL(wp) :: s_r3 !<
178
179	CHARACTER (LEN=varnamelength) :: trimvar !< TRIM of output-variable string
180
181
182	CALL cpu_log (log_point(34),'sum_up_3d_data','start')
183
184	!
185	!-- Allocate and initialize the summation arrays if called for the very first
186	!-- time or the first time after average_3d_data has been called
187	!-- (some or all of the arrays may have been already allocated
188	!-- in read_3d_binary)
189	IF ( average_count_3d == 0 ) THEN
190
191	DO ii = 1, doav_n
192	!
193	!-- Temporary solution to account for data output within the new urban
194	!-- surface model (urban_surface_mod.f90), see also SELECT CASE ( trimvar )
195	trimvar = TRIM( doav(ii) )
196	IF ( urban_surface .AND. trimvar(1:4) == 'usm_' ) THEN
197	trimvar = 'usm_output'
198	ENDIF
199
200	SELECT CASE ( trimvar )
201
202	CASE ( 'e' )
203	IF ( .NOT. ALLOCATED( e_av ) ) THEN
204	ALLOCATE( e_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
205	ENDIF
206	e_av = 0.0_wp
207
208	CASE ( 'lpt' )
209	IF ( .NOT. ALLOCATED( lpt_av ) ) THEN
210	ALLOCATE( lpt_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
211	ENDIF
212	lpt_av = 0.0_wp
213
214	CASE ( 'lwp*' )
215	IF ( .NOT. ALLOCATED( lwp_av ) ) THEN
216	ALLOCATE( lwp_av(nysg:nyng,nxlg:nxrg) )
217	ENDIF
218	lwp_av = 0.0_wp
219
220	CASE ( 'nr' )
221	IF ( .NOT. ALLOCATED( nr_av ) ) THEN
222	ALLOCATE( nr_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
223	ENDIF
224	nr_av = 0.0_wp
225
226	CASE ( 'ol*' )
227	IF ( .NOT. ALLOCATED( ol_av ) ) THEN
228	ALLOCATE( ol_av(nysg:nyng,nxlg:nxrg) )
229	ENDIF
230	ol_av = 0.0_wp
231
232	CASE ( 'p' )
233	IF ( .NOT. ALLOCATED( p_av ) ) THEN
234	ALLOCATE( p_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
235	ENDIF
236	p_av = 0.0_wp
237
238	CASE ( 'pc' )
239	IF ( .NOT. ALLOCATED( pc_av ) ) THEN
240	ALLOCATE( pc_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
241	ENDIF
242	pc_av = 0.0_wp
243
244	CASE ( 'pr' )
245	IF ( .NOT. ALLOCATED( pr_av ) ) THEN
246	ALLOCATE( pr_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
247	ENDIF
248	pr_av = 0.0_wp
249
250	CASE ( 'prr' )
251	IF ( .NOT. ALLOCATED( prr_av ) ) THEN
252	ALLOCATE( prr_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
253	ENDIF
254	prr_av = 0.0_wp
255
256	CASE ( 'prr*' )
257	IF ( .NOT. ALLOCATED( precipitation_rate_av ) ) THEN
258	ALLOCATE( precipitation_rate_av(nysg:nyng,nxlg:nxrg) )
259	ENDIF
260	precipitation_rate_av = 0.0_wp
261
262	CASE ( 'pt' )
263	IF ( .NOT. ALLOCATED( pt_av ) ) THEN
264	ALLOCATE( pt_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
265	ENDIF
266	pt_av = 0.0_wp
267
268	CASE ( 'q' )
269	IF ( .NOT. ALLOCATED( q_av ) ) THEN
270	ALLOCATE( q_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
271	ENDIF
272	q_av = 0.0_wp
273
274	CASE ( 'qc' )
275	IF ( .NOT. ALLOCATED( qc_av ) ) THEN
276	ALLOCATE( qc_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
277	ENDIF
278	qc_av = 0.0_wp
279
280	CASE ( 'ql' )
281	IF ( .NOT. ALLOCATED( ql_av ) ) THEN
282	ALLOCATE( ql_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
283	ENDIF
284	ql_av = 0.0_wp
285
286	CASE ( 'ql_c' )
287	IF ( .NOT. ALLOCATED( ql_c_av ) ) THEN
288	ALLOCATE( ql_c_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
289	ENDIF
290	ql_c_av = 0.0_wp
291
292	CASE ( 'ql_v' )
293	IF ( .NOT. ALLOCATED( ql_v_av ) ) THEN
294	ALLOCATE( ql_v_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
295	ENDIF
296	ql_v_av = 0.0_wp
297
298	CASE ( 'ql_vp' )
299	IF ( .NOT. ALLOCATED( ql_vp_av ) ) THEN
300	ALLOCATE( ql_vp_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
301	ENDIF
302	ql_vp_av = 0.0_wp
303
304	CASE ( 'qr' )
305	IF ( .NOT. ALLOCATED( qr_av ) ) THEN
306	ALLOCATE( qr_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
307	ENDIF
308	qr_av = 0.0_wp
309
310	CASE ( 'qsws*' )
311	IF ( .NOT. ALLOCATED( qsws_av ) ) THEN
312	ALLOCATE( qsws_av(nysg:nyng,nxlg:nxrg) )
313	ENDIF
314	qsws_av = 0.0_wp
315
316	CASE ( 'qv' )
317	IF ( .NOT. ALLOCATED( qv_av ) ) THEN
318	ALLOCATE( qv_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
319	ENDIF
320	qv_av = 0.0_wp
321
322	CASE ( 'rho' )
323	IF ( .NOT. ALLOCATED( rho_av ) ) THEN
324	ALLOCATE( rho_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
325	ENDIF
326	rho_av = 0.0_wp
327
328	CASE ( 's' )
329	IF ( .NOT. ALLOCATED( s_av ) ) THEN
330	ALLOCATE( s_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
331	ENDIF
332	s_av = 0.0_wp
333
334	CASE ( 'sa' )
335	IF ( .NOT. ALLOCATED( sa_av ) ) THEN
336	ALLOCATE( sa_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
337	ENDIF
338	sa_av = 0.0_wp
339
340	CASE ( 'shf*' )
341	IF ( .NOT. ALLOCATED( shf_av ) ) THEN
342	ALLOCATE( shf_av(nysg:nyng,nxlg:nxrg) )
343	ENDIF
344	shf_av = 0.0_wp
345
346	CASE ( 't*' )
347	IF ( .NOT. ALLOCATED( ts_av ) ) THEN
348	ALLOCATE( ts_av(nysg:nyng,nxlg:nxrg) )
349	ENDIF
350	ts_av = 0.0_wp
351
352	CASE ( 'u' )
353	IF ( .NOT. ALLOCATED( u_av ) ) THEN
354	ALLOCATE( u_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
355	ENDIF
356	u_av = 0.0_wp
357
358	CASE ( 'u*' )
359	IF ( .NOT. ALLOCATED( us_av ) ) THEN
360	ALLOCATE( us_av(nysg:nyng,nxlg:nxrg) )
361	ENDIF
362	us_av = 0.0_wp
363
364	CASE ( 'v' )
365	IF ( .NOT. ALLOCATED( v_av ) ) THEN
366	ALLOCATE( v_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
367	ENDIF
368	v_av = 0.0_wp
369
370	CASE ( 'vpt' )
371	IF ( .NOT. ALLOCATED( vpt_av ) ) THEN
372	ALLOCATE( vpt_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
373	ENDIF
374	vpt_av = 0.0_wp
375
376	CASE ( 'w' )
377	IF ( .NOT. ALLOCATED( w_av ) ) THEN
378	ALLOCATE( w_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
379	ENDIF
380	w_av = 0.0_wp
381
382	CASE ( 'z0*' )
383	IF ( .NOT. ALLOCATED( z0_av ) ) THEN
384	ALLOCATE( z0_av(nysg:nyng,nxlg:nxrg) )
385	ENDIF
386	z0_av = 0.0_wp
387
388	CASE ( 'z0h*' )
389	IF ( .NOT. ALLOCATED( z0h_av ) ) THEN
390	ALLOCATE( z0h_av(nysg:nyng,nxlg:nxrg) )
391	ENDIF
392	z0h_av = 0.0_wp
393
394	CASE ( 'z0q*' )
395	IF ( .NOT. ALLOCATED( z0q_av ) ) THEN
396	ALLOCATE( z0q_av(nysg:nyng,nxlg:nxrg) )
397	ENDIF
398	z0q_av = 0.0_wp
399	!
400	!-- Block of urban surface model outputs
401	CASE ( 'usm_output' )
402
403	CALL usm_average_3d_data( 'allocate', doav(ii) )
404
405
406	CASE DEFAULT
407
408	!
409	!-- Land surface quantity
410	IF ( land_surface ) THEN
411	CALL lsm_3d_data_averaging( 'allocate', doav(ii) )
412	ENDIF
413
414	!
415	!-- Radiation quantity
416	IF ( radiation ) THEN
417	CALL radiation_3d_data_averaging( 'allocate', doav(ii) )
418	ENDIF
419
420	!
421	!-- User-defined quantity
422	CALL user_3d_data_averaging( 'allocate', doav(ii) )
423
424	END SELECT
425
426	ENDDO
427
428	ENDIF
429
430	!
431	!-- Loop of all variables to be averaged.
432	DO ii = 1, doav_n
433	!
434	!-- Temporary solution to account for data output within the new urban
435	!-- surface model (urban_surface_mod.f90), see also SELECT CASE ( trimvar )
436	trimvar = TRIM( doav(ii) )
437	IF ( urban_surface .AND. trimvar(1:4) == 'usm_' ) THEN
438	trimvar = 'usm_output'
439	ENDIF
440	!
441	!-- Store the array chosen on the temporary array.
442	SELECT CASE ( trimvar )
443
444	CASE ( 'e' )
445	DO i = nxlg, nxrg
446	DO j = nysg, nyng
447	DO k = nzb, nzt+1
448	e_av(k,j,i) = e_av(k,j,i) + e(k,j,i)
449	ENDDO
450	ENDDO
451	ENDDO
452
453	CASE ( 'lpt' )
454	DO i = nxlg, nxrg
455	DO j = nysg, nyng
456	DO k = nzb, nzt+1
457	lpt_av(k,j,i) = lpt_av(k,j,i) + pt(k,j,i)
458	ENDDO
459	ENDDO
460	ENDDO
461
462	CASE ( 'lwp*' )
463	DO i = nxlg, nxrg
464	DO j = nysg, nyng
465	lwp_av(j,i) = lwp_av(j,i) + SUM( ql(nzb:nzt,j,i) &
466	* dzw(1:nzt+1) ) * rho_surface
467	ENDDO
468	ENDDO
469
470	CASE ( 'nr' )
471	DO i = nxlg, nxrg
472	DO j = nysg, nyng
473	DO k = nzb, nzt+1
474	nr_av(k,j,i) = nr_av(k,j,i) + nr(k,j,i)
475	ENDDO
476	ENDDO
477	ENDDO
478
479	CASE ( 'ol*' )
480	DO i = nxlg, nxrg
481	DO j = nysg, nyng
482	ol_av(j,i) = ol_av(j,i) + ol(j,i)
483	ENDDO
484	ENDDO
485
486	CASE ( 'p' )
487	DO i = nxlg, nxrg
488	DO j = nysg, nyng
489	DO k = nzb, nzt+1
490	p_av(k,j,i) = p_av(k,j,i) + p(k,j,i)
491	ENDDO
492	ENDDO
493	ENDDO
494
495	CASE ( 'pc' )
496	DO i = nxl, nxr
497	DO j = nys, nyn
498	DO k = nzb, nzt+1
499	pc_av(k,j,i) = pc_av(k,j,i) + prt_count(k,j,i)
500	ENDDO
501	ENDDO
502	ENDDO
503
504	CASE ( 'pr' )
505	DO i = nxl, nxr
506	DO j = nys, nyn
507	DO k = nzb, nzt+1
508	number_of_particles = prt_count(k,j,i)
509	IF ( number_of_particles <= 0 ) CYCLE
510	particles => grid_particles(k,j,i)%particles(1:number_of_particles)
511	s_r2 = 0.0_wp
512	s_r3 = 0.0_wp
513
514	DO n = 1, number_of_particles
515	IF ( particles(n)%particle_mask ) THEN
516	s_r2 = s_r2 + particles(n)%radius*2 &
517	particles(n)%weight_factor
518	s_r3 = s_r3 + particles(n)%radius*3 &
519	particles(n)%weight_factor
520	ENDIF
521	ENDDO
522
523	IF ( s_r2 > 0.0_wp ) THEN
524	mean_r = s_r3 / s_r2
525	ELSE
526	mean_r = 0.0_wp
527	ENDIF
528	pr_av(k,j,i) = pr_av(k,j,i) + mean_r
529	ENDDO
530	ENDDO
531	ENDDO
532
533
534	CASE ( 'pr*' )
535	DO i = nxlg, nxrg
536	DO j = nysg, nyng
537	precipitation_rate_av(j,i) = precipitation_rate_av(j,i) + &
538	precipitation_rate(j,i)
539	ENDDO
540	ENDDO
541
542	CASE ( 'pt' )
543	IF ( .NOT. cloud_physics ) THEN
544	DO i = nxlg, nxrg
545	DO j = nysg, nyng
546	DO k = nzb, nzt+1
547	pt_av(k,j,i) = pt_av(k,j,i) + pt(k,j,i)
548	ENDDO
549	ENDDO
550	ENDDO
551	ELSE
552	DO i = nxlg, nxrg
553	DO j = nysg, nyng
554	DO k = nzb, nzt+1
555	pt_av(k,j,i) = pt_av(k,j,i) + pt(k,j,i) + l_d_cp * &
556	pt_d_t(k) * ql(k,j,i)
557	ENDDO
558	ENDDO
559	ENDDO
560	ENDIF
561
562	CASE ( 'q' )
563	DO i = nxlg, nxrg
564	DO j = nysg, nyng
565	DO k = nzb, nzt+1
566	q_av(k,j,i) = q_av(k,j,i) + q(k,j,i)
567	ENDDO
568	ENDDO
569	ENDDO
570
571	CASE ( 'qc' )
572	DO i = nxlg, nxrg
573	DO j = nysg, nyng
574	DO k = nzb, nzt+1
575	qc_av(k,j,i) = qc_av(k,j,i) + qc(k,j,i)
576	ENDDO
577	ENDDO
578	ENDDO
579
580	CASE ( 'ql' )
581	DO i = nxlg, nxrg
582	DO j = nysg, nyng
583	DO k = nzb, nzt+1
584	ql_av(k,j,i) = ql_av(k,j,i) + ql(k,j,i)
585	ENDDO
586	ENDDO
587	ENDDO
588
589	CASE ( 'ql_c' )
590	DO i = nxlg, nxrg
591	DO j = nysg, nyng
592	DO k = nzb, nzt+1
593	ql_c_av(k,j,i) = ql_c_av(k,j,i) + ql_c(k,j,i)
594	ENDDO
595	ENDDO
596	ENDDO
597
598	CASE ( 'ql_v' )
599	DO i = nxlg, nxrg
600	DO j = nysg, nyng
601	DO k = nzb, nzt+1
602	ql_v_av(k,j,i) = ql_v_av(k,j,i) + ql_v(k,j,i)
603	ENDDO
604	ENDDO
605	ENDDO
606
607	CASE ( 'ql_vp' )
608	DO i = nxl, nxr
609	DO j = nys, nyn
610	DO k = nzb, nzt+1
611	number_of_particles = prt_count(k,j,i)
612	IF ( number_of_particles <= 0 ) CYCLE
613	particles => grid_particles(k,j,i)%particles(1:number_of_particles)
614	DO n = 1, number_of_particles
615	IF ( particles(n)%particle_mask ) THEN
616	ql_vp_av(k,j,i) = ql_vp_av(k,j,i) + &
617	particles(n)%weight_factor / &
618	number_of_particles
619	ENDIF
620	ENDDO
621	ENDDO
622	ENDDO
623	ENDDO
624
625	CASE ( 'qr' )
626	DO i = nxlg, nxrg
627	DO j = nysg, nyng
628	DO k = nzb, nzt+1
629	qr_av(k,j,i) = qr_av(k,j,i) + qr(k,j,i)
630	ENDDO
631	ENDDO
632	ENDDO
633
634	CASE ( 'qsws*' )
635	DO i = nxlg, nxrg
636	DO j = nysg, nyng
637	qsws_av(j,i) = qsws_av(j,i) + qsws(j,i)
638	ENDDO
639	ENDDO
640
641	CASE ( 'qv' )
642	DO i = nxlg, nxrg
643	DO j = nysg, nyng
644	DO k = nzb, nzt+1
645	qv_av(k,j,i) = qv_av(k,j,i) + q(k,j,i) - ql(k,j,i)
646	ENDDO
647	ENDDO
648	ENDDO
649
650	CASE ( 'rho' )
651	DO i = nxlg, nxrg
652	DO j = nysg, nyng
653	DO k = nzb, nzt+1
654	rho_av(k,j,i) = rho_av(k,j,i) + rho(k,j,i)
655	ENDDO
656	ENDDO
657	ENDDO
658
659	CASE ( 's' )
660	DO i = nxlg, nxrg
661	DO j = nysg, nyng
662	DO k = nzb, nzt+1
663	s_av(k,j,i) = s_av(k,j,i) + s(k,j,i)
664	ENDDO
665	ENDDO
666	ENDDO
667
668	CASE ( 'sa' )
669	DO i = nxlg, nxrg
670	DO j = nysg, nyng
671	DO k = nzb, nzt+1
672	sa_av(k,j,i) = sa_av(k,j,i) + sa(k,j,i)
673	ENDDO
674	ENDDO
675	ENDDO
676
677	CASE ( 'shf*' )
678	DO i = nxlg, nxrg
679	DO j = nysg, nyng
680	shf_av(j,i) = shf_av(j,i) + shf(j,i)
681	ENDDO
682	ENDDO
683
684	CASE ( 'ssws*' )
685	DO i = nxlg, nxrg
686	DO j = nysg, nyng
687	ssws_av(j,i) = ssws_av(j,i) + ssws(j,i)
688	ENDDO
689	ENDDO
690
691	CASE ( 't*' )
692	DO i = nxlg, nxrg
693	DO j = nysg, nyng
694	ts_av(j,i) = ts_av(j,i) + ts(j,i)
695	ENDDO
696	ENDDO
697
698	CASE ( 'u' )
699	DO i = nxlg, nxrg
700	DO j = nysg, nyng
701	DO k = nzb, nzt+1
702	u_av(k,j,i) = u_av(k,j,i) + u(k,j,i)
703	ENDDO
704	ENDDO
705	ENDDO
706
707	CASE ( 'u*' )
708	DO i = nxlg, nxrg
709	DO j = nysg, nyng
710	us_av(j,i) = us_av(j,i) + us(j,i)
711	ENDDO
712	ENDDO
713
714	CASE ( 'v' )
715	DO i = nxlg, nxrg
716	DO j = nysg, nyng
717	DO k = nzb, nzt+1
718	v_av(k,j,i) = v_av(k,j,i) + v(k,j,i)
719	ENDDO
720	ENDDO
721	ENDDO
722
723	CASE ( 'vpt' )
724	DO i = nxlg, nxrg
725	DO j = nysg, nyng
726	DO k = nzb, nzt+1
727	vpt_av(k,j,i) = vpt_av(k,j,i) + vpt(k,j,i)
728	ENDDO
729	ENDDO
730	ENDDO
731
732	CASE ( 'w' )
733	DO i = nxlg, nxrg
734	DO j = nysg, nyng
735	DO k = nzb, nzt+1
736	w_av(k,j,i) = w_av(k,j,i) + w(k,j,i)
737	ENDDO
738	ENDDO
739	ENDDO
740
741	CASE ( 'z0*' )
742	DO i = nxlg, nxrg
743	DO j = nysg, nyng
744	z0_av(j,i) = z0_av(j,i) + z0(j,i)
745	ENDDO
746	ENDDO
747
748	CASE ( 'z0h*' )
749	DO i = nxlg, nxrg
750	DO j = nysg, nyng
751	z0h_av(j,i) = z0h_av(j,i) + z0h(j,i)
752	ENDDO
753	ENDDO
754
755	CASE ( 'z0q*' )
756	DO i = nxlg, nxrg
757	DO j = nysg, nyng
758	z0q_av(j,i) = z0q_av(j,i) + z0q(j,i)
759	ENDDO
760	ENDDO
761	!
762	!-- Block of urban surface model outputs
763	CASE ( 'usm_output' )
764	CALL usm_average_3d_data( 'sum', doav(ii) )
765
766	CASE DEFAULT
767	!
768	!-- Land surface quantity
769	IF ( land_surface ) THEN
770	CALL lsm_3d_data_averaging( 'sum', doav(ii) )
771	ENDIF
772
773	!
774	!-- Radiation quantity
775	IF ( radiation ) THEN
776	CALL radiation_3d_data_averaging( 'sum', doav(ii) )
777	ENDIF
778
779	!
780	!-- User-defined quantity
781	CALL user_3d_data_averaging( 'sum', doav(ii) )
782
783	END SELECT
784
785	ENDDO
786
787	CALL cpu_log( log_point(34), 'sum_up_3d_data', 'stop' )
788
789
790	END SUBROUTINE sum_up_3d_data

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |