Home

Context Navigation

source: palm/trunk/SOURCE/sum_up_3d_data.f90 @ 2011

Last change on this file since 2011 was 2011, checked in by kanani, 8 years ago
changes related to steering and formating of urban surface model
Property svn:keywords set to `Id`
File size: 24.7 KB

Line
1	!> @file sum_up_3d_data.f90
2	!------------------------------------------------------------------------------!
3	! This file is part of PALM.
4	!
5	! PALM is free software: you can redistribute it and/or modify it under the
6	! terms of the GNU General Public License as published by the Free Software
7	! Foundation, either version 3 of the License, or (at your option) any later
8	! version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2016 Leibniz Universitaet Hannover
18	!------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	! Flag urban_surface is now defined in module control_parameters,
23	! changed prefix for urban surface model output to "usm_",
24	! introduced control parameter varnamelength for LEN of trimvar.
25	!
26	! Former revisions:
27	! -----------------
28	! $Id: sum_up_3d_data.f90 2011 2016-09-19 17:29:57Z kanani $
29	!
30	! 2007 2016-08-24 15:47:17Z kanani
31	! Added support for new urban surface model (temporary modifications of
32	! SELECT CASE ( ) necessary, see variable trimvar),
33	! added comments in variable declaration section
34	!
35	! 2000 2016-08-20 18:09:15Z knoop
36	! Forced header and separation lines into 80 columns
37	!
38	! 1992 2016-08-12 15:14:59Z suehring
39	! Bugfix in summation of passive scalar
40	!
41	! 1976 2016-07-27 13:28:04Z maronga
42	! Radiation actions are now done directly in the respective module
43	!
44	! 1972 2016-07-26 07:52:02Z maronga
45	! Land surface actions are now done directly in the respective module
46	!
47	! 1960 2016-07-12 16:34:24Z suehring
48	! Scalar surface flux added
49	!
50	! 1949 2016-06-17 07:19:16Z maronga
51	! Bugfix: calculation of lai_av, c_veg_av and c_liq_av.
52	!
53	! 1849 2016-04-08 11:33:18Z hoffmann
54	! precipitation_rate moved to arrays_3d
55	!
56	! 1788 2016-03-10 11:01:04Z maronga
57	! Added z0q and z0q_av
58	!
59	! 1693 2015-10-27 08:35:45Z maronga
60	! Last revision text corrected
61	!
62	! 1691 2015-10-26 16:17:44Z maronga
63	! Added output of Obukhov length and radiative heating rates for RRTMG.
64	! Corrected output of liquid water path.
65	!
66	! 1682 2015-10-07 23:56:08Z knoop
67	! Code annotations made doxygen readable
68	!
69	! 1585 2015-04-30 07:05:52Z maronga
70	! Adapted for RRTMG
71	!
72	! 1555 2015-03-04 17:44:27Z maronga
73	! Added output of r_a and r_s
74	!
75	! 1551 2015-03-03 14:18:16Z maronga
76	! Added support for land surface model and radiation model data.
77	!
78	! 1359 2014-04-11 17:15:14Z hoffmann
79	! New particle structure integrated.
80	!
81	! 1353 2014-04-08 15:21:23Z heinze
82	! REAL constants provided with KIND-attribute
83	!
84	! 1320 2014-03-20 08:40:49Z raasch
85	! ONLY-attribute added to USE-statements,
86	! kind-parameters added to all INTEGER and REAL declaration statements,
87	! kinds are defined in new module kinds,
88	! old module precision_kind is removed,
89	! revision history before 2012 removed,
90	! comment fields (!:) to be used for variable explanations added to
91	! all variable declaration statements
92	!
93	! 1318 2014-03-17 13:35:16Z raasch
94	! barrier argument removed from cpu_log,
95	! module interfaces removed
96	!
97	! 1115 2013-03-26 18:16:16Z hoffmann
98	! ql is calculated by calc_liquid_water_content
99	!
100	! 1053 2012-11-13 17:11:03Z hoffmann
101	! +nr, prr, qr
102	!
103	! 1036 2012-10-22 13:43:42Z raasch
104	! code put under GPL (PALM 3.9)
105	!
106	! 1007 2012-09-19 14:30:36Z franke
107	! Bugfix in calculation of ql_vp
108	!
109	! 978 2012-08-09 08:28:32Z fricke
110	! +z0h*
111	!
112	! Revision 1.1 2006/02/23 12:55:23 raasch
113	! Initial revision
114	!
115	!
116	! Description:
117	! ------------
118	!> Sum-up the values of 3d-arrays. The real averaging is later done in routine
119	!> average_3d_data.
120	!------------------------------------------------------------------------------!
121	SUBROUTINE sum_up_3d_data
122
123
124	USE arrays_3d, &
125	ONLY: dzw, e, nr, ol, p, pt, precipitation_rate, q, qc, ql, ql_c, &
126	ql_v, qr, qsws, rho, s, sa, shf, ssws, ts, u, us, v, vpt, w, z0,&
127	z0h, z0q
128
129	USE averaging, &
130	ONLY: e_av, lpt_av, lwp_av, nr_av, ol_av, p_av, pc_av, pr_av, prr_av, &
131	precipitation_rate_av, pt_av, q_av, qc_av, ql_av, ql_c_av, &
132	ql_v_av, ql_vp_av, qr_av, qsws_av, qv_av, rho_av, s_av, sa_av, &
133	shf_av, ssws_av, ts_av, u_av, us_av, v_av, vpt_av, w_av, z0_av, &
134	z0h_av, z0q_av
135
136	USE cloud_parameters, &
137	ONLY: l_d_cp, pt_d_t
138
139	USE control_parameters, &
140	ONLY: average_count_3d, cloud_physics, doav, doav_n, rho_surface, &
141	urban_surface, varnamelength
142
143	USE cpulog, &
144	ONLY: cpu_log, log_point
145
146	USE indices, &
147	ONLY: nxl, nxlg, nxr, nxrg, nyn, nyng, nys, nysg, nzb, nzt
148
149	USE kinds
150
151	USE land_surface_model_mod, &
152	ONLY: land_surface, lsm_3d_data_averaging
153
154	USE particle_attributes, &
155	ONLY: grid_particles, number_of_particles, particles, prt_count
156
157	USE radiation_model_mod, &
158	ONLY: radiation, radiation_3d_data_averaging
159
160	USE urban_surface_mod, &
161	ONLY: usm_average_3d_data
162
163
164	IMPLICIT NONE
165
166	INTEGER(iwp) :: i !< running index
167	INTEGER(iwp) :: ii !< running index
168	INTEGER(iwp) :: j !< running index
169	INTEGER(iwp) :: k !< running index
170	INTEGER(iwp) :: n !<
171
172	REAL(wp) :: mean_r !<
173	REAL(wp) :: s_r2 !<
174	REAL(wp) :: s_r3 !<
175
176	CHARACTER (LEN=varnamelength) :: trimvar !< TRIM of output-variable string
177
178
179	CALL cpu_log (log_point(34),'sum_up_3d_data','start')
180
181	!
182	!-- Allocate and initialize the summation arrays if called for the very first
183	!-- time or the first time after average_3d_data has been called
184	!-- (some or all of the arrays may have been already allocated
185	!-- in read_3d_binary)
186	IF ( average_count_3d == 0 ) THEN
187
188	DO ii = 1, doav_n
189	!
190	!-- Temporary solution to account for data output within the new urban
191	!-- surface model (urban_surface_mod.f90), see also SELECT CASE ( trimvar )
192	trimvar = TRIM( doav(ii) )
193	IF ( urban_surface .AND. trimvar(1:4) == 'usm_' ) THEN
194	trimvar = 'usm_output'
195	ENDIF
196
197	SELECT CASE ( trimvar )
198
199	CASE ( 'e' )
200	IF ( .NOT. ALLOCATED( e_av ) ) THEN
201	ALLOCATE( e_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
202	ENDIF
203	e_av = 0.0_wp
204
205	CASE ( 'lpt' )
206	IF ( .NOT. ALLOCATED( lpt_av ) ) THEN
207	ALLOCATE( lpt_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
208	ENDIF
209	lpt_av = 0.0_wp
210
211	CASE ( 'lwp*' )
212	IF ( .NOT. ALLOCATED( lwp_av ) ) THEN
213	ALLOCATE( lwp_av(nysg:nyng,nxlg:nxrg) )
214	ENDIF
215	lwp_av = 0.0_wp
216
217	CASE ( 'nr' )
218	IF ( .NOT. ALLOCATED( nr_av ) ) THEN
219	ALLOCATE( nr_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
220	ENDIF
221	nr_av = 0.0_wp
222
223	CASE ( 'ol*' )
224	IF ( .NOT. ALLOCATED( ol_av ) ) THEN
225	ALLOCATE( ol_av(nysg:nyng,nxlg:nxrg) )
226	ENDIF
227	ol_av = 0.0_wp
228
229	CASE ( 'p' )
230	IF ( .NOT. ALLOCATED( p_av ) ) THEN
231	ALLOCATE( p_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
232	ENDIF
233	p_av = 0.0_wp
234
235	CASE ( 'pc' )
236	IF ( .NOT. ALLOCATED( pc_av ) ) THEN
237	ALLOCATE( pc_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
238	ENDIF
239	pc_av = 0.0_wp
240
241	CASE ( 'pr' )
242	IF ( .NOT. ALLOCATED( pr_av ) ) THEN
243	ALLOCATE( pr_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
244	ENDIF
245	pr_av = 0.0_wp
246
247	CASE ( 'prr' )
248	IF ( .NOT. ALLOCATED( prr_av ) ) THEN
249	ALLOCATE( prr_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
250	ENDIF
251	prr_av = 0.0_wp
252
253	CASE ( 'prr*' )
254	IF ( .NOT. ALLOCATED( precipitation_rate_av ) ) THEN
255	ALLOCATE( precipitation_rate_av(nysg:nyng,nxlg:nxrg) )
256	ENDIF
257	precipitation_rate_av = 0.0_wp
258
259	CASE ( 'pt' )
260	IF ( .NOT. ALLOCATED( pt_av ) ) THEN
261	ALLOCATE( pt_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
262	ENDIF
263	pt_av = 0.0_wp
264
265	CASE ( 'q' )
266	IF ( .NOT. ALLOCATED( q_av ) ) THEN
267	ALLOCATE( q_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
268	ENDIF
269	q_av = 0.0_wp
270
271	CASE ( 'qc' )
272	IF ( .NOT. ALLOCATED( qc_av ) ) THEN
273	ALLOCATE( qc_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
274	ENDIF
275	qc_av = 0.0_wp
276
277	CASE ( 'ql' )
278	IF ( .NOT. ALLOCATED( ql_av ) ) THEN
279	ALLOCATE( ql_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
280	ENDIF
281	ql_av = 0.0_wp
282
283	CASE ( 'ql_c' )
284	IF ( .NOT. ALLOCATED( ql_c_av ) ) THEN
285	ALLOCATE( ql_c_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
286	ENDIF
287	ql_c_av = 0.0_wp
288
289	CASE ( 'ql_v' )
290	IF ( .NOT. ALLOCATED( ql_v_av ) ) THEN
291	ALLOCATE( ql_v_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
292	ENDIF
293	ql_v_av = 0.0_wp
294
295	CASE ( 'ql_vp' )
296	IF ( .NOT. ALLOCATED( ql_vp_av ) ) THEN
297	ALLOCATE( ql_vp_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
298	ENDIF
299	ql_vp_av = 0.0_wp
300
301	CASE ( 'qr' )
302	IF ( .NOT. ALLOCATED( qr_av ) ) THEN
303	ALLOCATE( qr_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
304	ENDIF
305	qr_av = 0.0_wp
306
307	CASE ( 'qsws*' )
308	IF ( .NOT. ALLOCATED( qsws_av ) ) THEN
309	ALLOCATE( qsws_av(nysg:nyng,nxlg:nxrg) )
310	ENDIF
311	qsws_av = 0.0_wp
312
313	CASE ( 'qv' )
314	IF ( .NOT. ALLOCATED( qv_av ) ) THEN
315	ALLOCATE( qv_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
316	ENDIF
317	qv_av = 0.0_wp
318
319	CASE ( 'rho' )
320	IF ( .NOT. ALLOCATED( rho_av ) ) THEN
321	ALLOCATE( rho_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
322	ENDIF
323	rho_av = 0.0_wp
324
325	CASE ( 's' )
326	IF ( .NOT. ALLOCATED( s_av ) ) THEN
327	ALLOCATE( s_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
328	ENDIF
329	s_av = 0.0_wp
330
331	CASE ( 'sa' )
332	IF ( .NOT. ALLOCATED( sa_av ) ) THEN
333	ALLOCATE( sa_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
334	ENDIF
335	sa_av = 0.0_wp
336
337	CASE ( 'shf*' )
338	IF ( .NOT. ALLOCATED( shf_av ) ) THEN
339	ALLOCATE( shf_av(nysg:nyng,nxlg:nxrg) )
340	ENDIF
341	shf_av = 0.0_wp
342
343	CASE ( 't*' )
344	IF ( .NOT. ALLOCATED( ts_av ) ) THEN
345	ALLOCATE( ts_av(nysg:nyng,nxlg:nxrg) )
346	ENDIF
347	ts_av = 0.0_wp
348
349	CASE ( 'u' )
350	IF ( .NOT. ALLOCATED( u_av ) ) THEN
351	ALLOCATE( u_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
352	ENDIF
353	u_av = 0.0_wp
354
355	CASE ( 'u*' )
356	IF ( .NOT. ALLOCATED( us_av ) ) THEN
357	ALLOCATE( us_av(nysg:nyng,nxlg:nxrg) )
358	ENDIF
359	us_av = 0.0_wp
360
361	CASE ( 'v' )
362	IF ( .NOT. ALLOCATED( v_av ) ) THEN
363	ALLOCATE( v_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
364	ENDIF
365	v_av = 0.0_wp
366
367	CASE ( 'vpt' )
368	IF ( .NOT. ALLOCATED( vpt_av ) ) THEN
369	ALLOCATE( vpt_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
370	ENDIF
371	vpt_av = 0.0_wp
372
373	CASE ( 'w' )
374	IF ( .NOT. ALLOCATED( w_av ) ) THEN
375	ALLOCATE( w_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
376	ENDIF
377	w_av = 0.0_wp
378
379	CASE ( 'z0*' )
380	IF ( .NOT. ALLOCATED( z0_av ) ) THEN
381	ALLOCATE( z0_av(nysg:nyng,nxlg:nxrg) )
382	ENDIF
383	z0_av = 0.0_wp
384
385	CASE ( 'z0h*' )
386	IF ( .NOT. ALLOCATED( z0h_av ) ) THEN
387	ALLOCATE( z0h_av(nysg:nyng,nxlg:nxrg) )
388	ENDIF
389	z0h_av = 0.0_wp
390
391	CASE ( 'z0q*' )
392	IF ( .NOT. ALLOCATED( z0q_av ) ) THEN
393	ALLOCATE( z0q_av(nysg:nyng,nxlg:nxrg) )
394	ENDIF
395	z0q_av = 0.0_wp
396	!
397	!-- Block of urban surface model outputs
398	CASE ( 'usm_output' )
399
400	CALL usm_average_3d_data( 'allocate', doav(ii) )
401
402
403	CASE DEFAULT
404
405	!
406	!-- Land surface quantity
407	IF ( land_surface ) THEN
408	CALL lsm_3d_data_averaging( 'allocate', doav(ii) )
409	ENDIF
410
411	!
412	!-- Radiation quantity
413	IF ( radiation ) THEN
414	CALL radiation_3d_data_averaging( 'allocate', doav(ii) )
415	ENDIF
416
417	!
418	!-- User-defined quantity
419	CALL user_3d_data_averaging( 'allocate', doav(ii) )
420
421	END SELECT
422
423	ENDDO
424
425	ENDIF
426
427	!
428	!-- Loop of all variables to be averaged.
429	DO ii = 1, doav_n
430	!
431	!-- Temporary solution to account for data output within the new urban
432	!-- surface model (urban_surface_mod.f90), see also SELECT CASE ( trimvar )
433	trimvar = TRIM( doav(ii) )
434	IF ( urban_surface .AND. trimvar(1:4) == 'usm_' ) THEN
435	trimvar = 'usm_output'
436	ENDIF
437	!
438	!-- Store the array chosen on the temporary array.
439	SELECT CASE ( trimvar )
440
441	CASE ( 'e' )
442	DO i = nxlg, nxrg
443	DO j = nysg, nyng
444	DO k = nzb, nzt+1
445	e_av(k,j,i) = e_av(k,j,i) + e(k,j,i)
446	ENDDO
447	ENDDO
448	ENDDO
449
450	CASE ( 'lpt' )
451	DO i = nxlg, nxrg
452	DO j = nysg, nyng
453	DO k = nzb, nzt+1
454	lpt_av(k,j,i) = lpt_av(k,j,i) + pt(k,j,i)
455	ENDDO
456	ENDDO
457	ENDDO
458
459	CASE ( 'lwp*' )
460	DO i = nxlg, nxrg
461	DO j = nysg, nyng
462	lwp_av(j,i) = lwp_av(j,i) + SUM( ql(nzb:nzt,j,i) &
463	* dzw(1:nzt+1) ) * rho_surface
464	ENDDO
465	ENDDO
466
467	CASE ( 'nr' )
468	DO i = nxlg, nxrg
469	DO j = nysg, nyng
470	DO k = nzb, nzt+1
471	nr_av(k,j,i) = nr_av(k,j,i) + nr(k,j,i)
472	ENDDO
473	ENDDO
474	ENDDO
475
476	CASE ( 'ol*' )
477	DO i = nxlg, nxrg
478	DO j = nysg, nyng
479	ol_av(j,i) = ol_av(j,i) + ol(j,i)
480	ENDDO
481	ENDDO
482
483	CASE ( 'p' )
484	DO i = nxlg, nxrg
485	DO j = nysg, nyng
486	DO k = nzb, nzt+1
487	p_av(k,j,i) = p_av(k,j,i) + p(k,j,i)
488	ENDDO
489	ENDDO
490	ENDDO
491
492	CASE ( 'pc' )
493	DO i = nxl, nxr
494	DO j = nys, nyn
495	DO k = nzb, nzt+1
496	pc_av(k,j,i) = pc_av(k,j,i) + prt_count(k,j,i)
497	ENDDO
498	ENDDO
499	ENDDO
500
501	CASE ( 'pr' )
502	DO i = nxl, nxr
503	DO j = nys, nyn
504	DO k = nzb, nzt+1
505	number_of_particles = prt_count(k,j,i)
506	IF ( number_of_particles <= 0 ) CYCLE
507	particles => grid_particles(k,j,i)%particles(1:number_of_particles)
508	s_r2 = 0.0_wp
509	s_r3 = 0.0_wp
510
511	DO n = 1, number_of_particles
512	IF ( particles(n)%particle_mask ) THEN
513	s_r2 = s_r2 + particles(n)%radius*2 &
514	particles(n)%weight_factor
515	s_r3 = s_r3 + particles(n)%radius*3 &
516	particles(n)%weight_factor
517	ENDIF
518	ENDDO
519
520	IF ( s_r2 > 0.0_wp ) THEN
521	mean_r = s_r3 / s_r2
522	ELSE
523	mean_r = 0.0_wp
524	ENDIF
525	pr_av(k,j,i) = pr_av(k,j,i) + mean_r
526	ENDDO
527	ENDDO
528	ENDDO
529
530
531	CASE ( 'pr*' )
532	DO i = nxlg, nxrg
533	DO j = nysg, nyng
534	precipitation_rate_av(j,i) = precipitation_rate_av(j,i) + &
535	precipitation_rate(j,i)
536	ENDDO
537	ENDDO
538
539	CASE ( 'pt' )
540	IF ( .NOT. cloud_physics ) THEN
541	DO i = nxlg, nxrg
542	DO j = nysg, nyng
543	DO k = nzb, nzt+1
544	pt_av(k,j,i) = pt_av(k,j,i) + pt(k,j,i)
545	ENDDO
546	ENDDO
547	ENDDO
548	ELSE
549	DO i = nxlg, nxrg
550	DO j = nysg, nyng
551	DO k = nzb, nzt+1
552	pt_av(k,j,i) = pt_av(k,j,i) + pt(k,j,i) + l_d_cp * &
553	pt_d_t(k) * ql(k,j,i)
554	ENDDO
555	ENDDO
556	ENDDO
557	ENDIF
558
559	CASE ( 'q' )
560	DO i = nxlg, nxrg
561	DO j = nysg, nyng
562	DO k = nzb, nzt+1
563	q_av(k,j,i) = q_av(k,j,i) + q(k,j,i)
564	ENDDO
565	ENDDO
566	ENDDO
567
568	CASE ( 'qc' )
569	DO i = nxlg, nxrg
570	DO j = nysg, nyng
571	DO k = nzb, nzt+1
572	qc_av(k,j,i) = qc_av(k,j,i) + qc(k,j,i)
573	ENDDO
574	ENDDO
575	ENDDO
576
577	CASE ( 'ql' )
578	DO i = nxlg, nxrg
579	DO j = nysg, nyng
580	DO k = nzb, nzt+1
581	ql_av(k,j,i) = ql_av(k,j,i) + ql(k,j,i)
582	ENDDO
583	ENDDO
584	ENDDO
585
586	CASE ( 'ql_c' )
587	DO i = nxlg, nxrg
588	DO j = nysg, nyng
589	DO k = nzb, nzt+1
590	ql_c_av(k,j,i) = ql_c_av(k,j,i) + ql_c(k,j,i)
591	ENDDO
592	ENDDO
593	ENDDO
594
595	CASE ( 'ql_v' )
596	DO i = nxlg, nxrg
597	DO j = nysg, nyng
598	DO k = nzb, nzt+1
599	ql_v_av(k,j,i) = ql_v_av(k,j,i) + ql_v(k,j,i)
600	ENDDO
601	ENDDO
602	ENDDO
603
604	CASE ( 'ql_vp' )
605	DO i = nxl, nxr
606	DO j = nys, nyn
607	DO k = nzb, nzt+1
608	number_of_particles = prt_count(k,j,i)
609	IF ( number_of_particles <= 0 ) CYCLE
610	particles => grid_particles(k,j,i)%particles(1:number_of_particles)
611	DO n = 1, number_of_particles
612	IF ( particles(n)%particle_mask ) THEN
613	ql_vp_av(k,j,i) = ql_vp_av(k,j,i) + &
614	particles(n)%weight_factor / &
615	number_of_particles
616	ENDIF
617	ENDDO
618	ENDDO
619	ENDDO
620	ENDDO
621
622	CASE ( 'qr' )
623	DO i = nxlg, nxrg
624	DO j = nysg, nyng
625	DO k = nzb, nzt+1
626	qr_av(k,j,i) = qr_av(k,j,i) + qr(k,j,i)
627	ENDDO
628	ENDDO
629	ENDDO
630
631	CASE ( 'qsws*' )
632	DO i = nxlg, nxrg
633	DO j = nysg, nyng
634	qsws_av(j,i) = qsws_av(j,i) + qsws(j,i)
635	ENDDO
636	ENDDO
637
638	CASE ( 'qv' )
639	DO i = nxlg, nxrg
640	DO j = nysg, nyng
641	DO k = nzb, nzt+1
642	qv_av(k,j,i) = qv_av(k,j,i) + q(k,j,i) - ql(k,j,i)
643	ENDDO
644	ENDDO
645	ENDDO
646
647	CASE ( 'rho' )
648	DO i = nxlg, nxrg
649	DO j = nysg, nyng
650	DO k = nzb, nzt+1
651	rho_av(k,j,i) = rho_av(k,j,i) + rho(k,j,i)
652	ENDDO
653	ENDDO
654	ENDDO
655
656	CASE ( 's' )
657	DO i = nxlg, nxrg
658	DO j = nysg, nyng
659	DO k = nzb, nzt+1
660	s_av(k,j,i) = s_av(k,j,i) + s(k,j,i)
661	ENDDO
662	ENDDO
663	ENDDO
664
665	CASE ( 'sa' )
666	DO i = nxlg, nxrg
667	DO j = nysg, nyng
668	DO k = nzb, nzt+1
669	sa_av(k,j,i) = sa_av(k,j,i) + sa(k,j,i)
670	ENDDO
671	ENDDO
672	ENDDO
673
674	CASE ( 'shf*' )
675	DO i = nxlg, nxrg
676	DO j = nysg, nyng
677	shf_av(j,i) = shf_av(j,i) + shf(j,i)
678	ENDDO
679	ENDDO
680
681	CASE ( 'ssws*' )
682	DO i = nxlg, nxrg
683	DO j = nysg, nyng
684	ssws_av(j,i) = ssws_av(j,i) + ssws(j,i)
685	ENDDO
686	ENDDO
687
688	CASE ( 't*' )
689	DO i = nxlg, nxrg
690	DO j = nysg, nyng
691	ts_av(j,i) = ts_av(j,i) + ts(j,i)
692	ENDDO
693	ENDDO
694
695	CASE ( 'u' )
696	DO i = nxlg, nxrg
697	DO j = nysg, nyng
698	DO k = nzb, nzt+1
699	u_av(k,j,i) = u_av(k,j,i) + u(k,j,i)
700	ENDDO
701	ENDDO
702	ENDDO
703
704	CASE ( 'u*' )
705	DO i = nxlg, nxrg
706	DO j = nysg, nyng
707	us_av(j,i) = us_av(j,i) + us(j,i)
708	ENDDO
709	ENDDO
710
711	CASE ( 'v' )
712	DO i = nxlg, nxrg
713	DO j = nysg, nyng
714	DO k = nzb, nzt+1
715	v_av(k,j,i) = v_av(k,j,i) + v(k,j,i)
716	ENDDO
717	ENDDO
718	ENDDO
719
720	CASE ( 'vpt' )
721	DO i = nxlg, nxrg
722	DO j = nysg, nyng
723	DO k = nzb, nzt+1
724	vpt_av(k,j,i) = vpt_av(k,j,i) + vpt(k,j,i)
725	ENDDO
726	ENDDO
727	ENDDO
728
729	CASE ( 'w' )
730	DO i = nxlg, nxrg
731	DO j = nysg, nyng
732	DO k = nzb, nzt+1
733	w_av(k,j,i) = w_av(k,j,i) + w(k,j,i)
734	ENDDO
735	ENDDO
736	ENDDO
737
738	CASE ( 'z0*' )
739	DO i = nxlg, nxrg
740	DO j = nysg, nyng
741	z0_av(j,i) = z0_av(j,i) + z0(j,i)
742	ENDDO
743	ENDDO
744
745	CASE ( 'z0h*' )
746	DO i = nxlg, nxrg
747	DO j = nysg, nyng
748	z0h_av(j,i) = z0h_av(j,i) + z0h(j,i)
749	ENDDO
750	ENDDO
751
752	CASE ( 'z0q*' )
753	DO i = nxlg, nxrg
754	DO j = nysg, nyng
755	z0q_av(j,i) = z0q_av(j,i) + z0q(j,i)
756	ENDDO
757	ENDDO
758	!
759	!-- Block of urban surface model outputs
760	CASE ( 'usm_output' )
761	CALL usm_average_3d_data( 'sum', doav(ii) )
762
763	CASE DEFAULT
764	!
765	!-- Land surface quantity
766	IF ( land_surface ) THEN
767	CALL lsm_3d_data_averaging( 'sum', doav(ii) )
768	ENDIF
769
770	!
771	!-- Radiation quantity
772	IF ( radiation ) THEN
773	CALL radiation_3d_data_averaging( 'sum', doav(ii) )
774	ENDIF
775
776	!
777	!-- User-defined quantity
778	CALL user_3d_data_averaging( 'sum', doav(ii) )
779
780	END SELECT
781
782	ENDDO
783
784	CALL cpu_log( log_point(34), 'sum_up_3d_data', 'stop' )
785
786
787	END SUBROUTINE sum_up_3d_data

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |