Home

Context Navigation

source: palm/trunk/SOURCE/read_var_list.f90 @ 593

Last change on this file since 593 was 592, checked in by helmke, 14 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 31.3 KB

Rev	Line
[1]	1	SUBROUTINE read_var_list
	2
	3	!------------------------------------------------------------------------------!
[257]	4	! Current revisions:
[1]	5	! -----------------
[588]	6	!
[392]	7	!
	8	! Former revisions:
	9	! -----------------
	10	! $Id: read_var_list.f90 592 2010-10-28 06:39:22Z heinze $
	11	!
[592]	12	! 591 2010-10-28 06:35:52Z helmke
	13	! remove print command
	14	!
[588]	15	! 587 2010-10-27 08:36:51Z helmke
	16	! +time_domask
	17	!
[581]	18	! 580 2010-10-05 13:59:11Z heinze
	19	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
	20	! ws_vertical_gradient_level to subs_vertical_gradient_level and
	21	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
	22	!
[482]	23	! 411 2009-12-11 14:15:58Z heinze
	24	! +large_scale_subsidence, ws_vertical_gradient, ws_vertical_gradient_level,
	25	! ws_vertical_gradient_level_ind
	26	!
[392]	27	! 345 2009-07-01 14:37:56Z heinze
[345]	28	! +output_for_t0
[336]	29	! dt_fixed is read into a dummy variable.
[257]	30	! Output of messages replaced by message handling routine.
[240]	31	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
[291]	32	! canyon_wall_south, conserve_volume_flow_mode, coupling_start_time,
	33	! dp_external, dp_level_b, dp_smooth, dpdxy, run_coupled,
	34	! time_since_reference_point, topography_grid_convention, u_bulk, v_bulk
[198]	35	!
[226]	36	! 216 2008-11-25 07:12:43Z raasch
	37	! limitations for nx_on_file, ny_on_file removed (read_parts_of_var_list)
	38	!
[198]	39	! 173 2008-05-23 20:39:38Z raasch
[153]	40	! +cthf, leaf_surface_concentration, scalar_exchange_coefficient
[151]	41	! +numprocs_previous_run, hor_index_bounds_previous_run, inflow_damping_factor,
	42	! inflow_damping_height, inflow_damping_width, mean_inflow_profiles,
	43	! recycling_width, turbulent_inflow,
[145]	44	! -cross_ts_*, npex, npey,
	45	! hom_sum, volume_flow_area, volume_flow_initial moved from
[146]	46	! read_3d_binary to here,
[147]	47	! routines read_parts_of_var_list and skip_var_list added at the end
[138]	48	!
[139]	49	! 138 2007-11-28 10:03:58Z letzel
	50	! +canopy_mode, drag_coefficient, lad, lad_surface, lad_vertical_gradient,
	51	! lad_vertical_gradient_level, lad_vertical_gradient_level_ind, pch_index,
	52	! plant_canopy, time_sort_particles
	53	!
[110]	54	! 102 2007-07-27 09:09:17Z raasch
	55	! +time_coupling, top_momentumflux_u\|v
	56	!
[98]	57	! 95 2007-06-02 16:48:38Z raasch
	58	! +bc_sa_t, ocean, sa_init, sa_surface, sa_vertical_gradient,
	59	! sa_vertical_gradient_level, bottom/top_salinity_flux
	60	!
[90]	61	! 87 2007-05-22 15:46:47Z raasch
	62	! +max_pr_user (version 3.1), var_hom renamed pr_palm
	63	!
[77]	64	! 75 2007-03-22 09:54:05Z raasch
	65	! +loop_optimization, pt_reference, moisture renamed humidity
	66	!
[39]	67	! 20 2007-02-26 00:12:32Z raasch
	68	! +top_heatflux, use_top_fluxes
	69	!
[3]	70	! RCS Log replace by Id keyword, revision history cleaned up
	71	!
[1]	72	! Revision 1.34 2006/08/22 14:14:27 raasch
	73	! +dz_max
	74	!
	75	! Revision 1.1 1998/03/18 20:18:48 raasch
	76	! Initial revision
	77	!
	78	!
	79	! Description:
	80	! ------------
[143]	81	! Reading values of global control variables from restart-file (binary format)
[1]	82	!------------------------------------------------------------------------------!
	83
	84	USE arrays_3d
	85	USE averaging
[87]	86	USE control_parameters
[1]	87	USE grid_variables
	88	USE indices
	89	USE model_1d
[345]	90	USE netcdf_control
[116]	91	USE particle_attributes
[1]	92	USE pegrid
	93	USE profil_parameter
	94	USE statistics
	95
	96	IMPLICIT NONE
	97
	98	CHARACTER (LEN=10) :: binary_version, version_on_file
	99	CHARACTER (LEN=30) :: variable_chr
[87]	100
[336]	101	LOGICAL :: ldum
[143]	102
[336]	103
[1]	104	CALL check_open( 13 )
	105
	106	!
	107	!-- Make version number check first
	108	READ ( 13 ) version_on_file
[241]	109	binary_version = '3.4'
[1]	110	IF ( TRIM( version_on_file ) /= TRIM( binary_version ) ) THEN
[257]	111	WRITE( message_string, * ) 'version mismatch concerning control ', &
	112	'variables', &
	113	'&version on file = "', &
	114	TRIM( version_on_file ), '"', &
	115	'&version on program = "', &
	116	TRIM( binary_version ), '"'
	117	CALL message( 'read_var_list', 'PA0296', 1, 2, 0, 6, 0 )
[1]	118	ENDIF
	119
	120	!
[145]	121	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
	122	!-- run
	123	READ ( 13 ) variable_chr
	124	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
[274]	125	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
	126	'run on PE ', myid
[257]	127	CALL message( 'read_var_list', 'PA0297', 1, 2, 0, 6, 0 )
[145]	128	ENDIF
	129	READ ( 13 ) numprocs_previous_run
	130
[146]	131	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
	132	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
	133	ENDIF
[145]	134
	135	READ ( 13 ) variable_chr
	136	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
[257]	137	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
	138	'prior run on PE ', myid
	139	CALL message( 'read_var_list', 'PA0298', 1, 2, 0, 6, 0 )
[145]	140	ENDIF
	141	READ ( 13 ) hor_index_bounds_previous_run
	142
	143	!
[1]	144	!-- Read vertical number of gridpoints and number of different areas used
	145	!-- for computing statistics. Allocate arrays depending on these values,
	146	!-- which are needed for the following read instructions.
	147	READ ( 13 ) variable_chr
	148	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
[257]	149	WRITE( message_string, * ) 'nz not found in data from prior run on PE ',&
	150	myid
	151	CALL message( 'read_var_list', 'PA0299', 1, 2, 0, 6, 0 )
[1]	152	ENDIF
	153	READ ( 13 ) nz
[87]	154
[1]	155	READ ( 13 ) variable_chr
[87]	156	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
[257]	157	WRITE( message_string, * ) 'max_pr_user not found in data from ', &
[87]	158	'prior run on PE ', myid
[257]	159	CALL message( 'read_var_list', 'PA0300', 1, 2, 0, 6, 0 )
[87]	160	ENDIF
[159]	161	READ ( 13 ) max_pr_user ! This value is checked against the number of
	162	! user profiles given for the current run
	163	! in routine user_parin (it has to match)
[87]	164
	165	READ ( 13 ) variable_chr
[1]	166	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
[257]	167	WRITE( message_string, * ) 'statistic_regions not found in data from ', &
[1]	168	'prior run on PE ', myid
[257]	169	CALL message( 'read_var_list', 'PA0301', 1, 2, 0, 6, 0 )
[1]	170	ENDIF
	171	READ ( 13 ) statistic_regions
[146]	172	IF ( .NOT. ALLOCATED( ug ) ) THEN
[147]	173	ALLOCATE( lad(0:nz+1), ug(0:nz+1), u_init(0:nz+1), vg(0:nz+1), &
	174	v_init(0:nz+1), pt_init(0:nz+1), q_init(0:nz+1), &
	175	sa_init(0:nz+1), &
[146]	176	hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions), &
	177	hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) )
	178	ENDIF
[1]	179
	180	!
	181	!-- Now read all control parameters:
	182	!-- Caution: When the following read instructions have been changed, the
	183	!-- ------- version number stored in the variable binary_version has to be
	184	!-- increased. The same changes must also be done in write_var_list.
	185	READ ( 13 ) variable_chr
	186	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	187
	188	SELECT CASE ( TRIM( variable_chr ) )
	189
	190	CASE ( 'adjust_mixing_length' )
	191	READ ( 13 ) adjust_mixing_length
	192	CASE ( 'advected_distance_x' )
	193	READ ( 13 ) advected_distance_x
	194	CASE ( 'advected_distance_y' )
	195	READ ( 13 ) advected_distance_y
	196	CASE ( 'alpha_surface' )
	197	READ ( 13 ) alpha_surface
	198	CASE ( 'average_count_pr' )
	199	READ ( 13 ) average_count_pr
	200	CASE ( 'average_count_sp' )
	201	READ ( 13 ) average_count_sp
	202	CASE ( 'average_count_3d' )
	203	READ ( 13 ) average_count_3d
	204	CASE ( 'bc_e_b' )
	205	READ ( 13 ) bc_e_b
	206	CASE ( 'bc_lr' )
	207	READ ( 13 ) bc_lr
	208	CASE ( 'bc_ns' )
	209	READ ( 13 ) bc_ns
	210	CASE ( 'bc_p_b' )
	211	READ ( 13 ) bc_p_b
	212	CASE ( 'bc_p_t' )
	213	READ ( 13 ) bc_p_t
	214	CASE ( 'bc_pt_b' )
	215	READ ( 13 ) bc_pt_b
	216	CASE ( 'bc_pt_t' )
	217	READ ( 13 ) bc_pt_t
	218	CASE ( 'bc_pt_t_val' )
	219	READ ( 13 ) bc_pt_t_val
	220	CASE ( 'bc_q_b' )
	221	READ ( 13 ) bc_q_b
	222	CASE ( 'bc_q_t' )
	223	READ ( 13 ) bc_q_t
	224	CASE ( 'bc_q_t_val' )
	225	READ ( 13 ) bc_q_t_val
	226	CASE ( 'bc_s_b' )
	227	READ ( 13 ) bc_s_b
	228	CASE ( 'bc_s_t' )
	229	READ ( 13 ) bc_s_t
[95]	230	CASE ( 'bc_sa_t' )
	231	READ ( 13 ) bc_sa_t
[1]	232	CASE ( 'bc_uv_b' )
	233	READ ( 13 ) bc_uv_b
	234	CASE ( 'bc_uv_t' )
	235	READ ( 13 ) bc_uv_t
[95]	236	CASE ( 'bottom_salinityflux' )
	237	READ ( 13 ) bottom_salinityflux
[1]	238	CASE ( 'building_height' )
	239	READ ( 13 ) building_height
	240	CASE ( 'building_length_x' )
	241	READ ( 13 ) building_length_x
	242	CASE ( 'building_length_y' )
	243	READ ( 13 ) building_length_y
	244	CASE ( 'building_wall_left' )
	245	READ ( 13 ) building_wall_left
	246	CASE ( 'building_wall_south' )
	247	READ ( 13 ) building_wall_south
[138]	248	CASE ( 'canopy_mode' )
	249	READ ( 13 ) canopy_mode
[240]	250	CASE ( 'canyon_height' )
	251	READ ( 13 ) canyon_height
	252	CASE ( 'canyon_width_x' )
	253	READ ( 13 ) canyon_width_x
	254	CASE ( 'canyon_width_y' )
	255	READ ( 13 ) canyon_width_y
	256	CASE ( 'canyon_wall_left' )
	257	READ ( 13 ) canyon_wall_left
	258	CASE ( 'canyon_wall_south' )
	259	READ ( 13 ) canyon_wall_south
[1]	260	CASE ( 'cloud_droplets' )
	261	READ ( 13 ) cloud_droplets
	262	CASE ( 'cloud_physics' )
	263	READ ( 13 ) cloud_physics
	264	CASE ( 'conserve_volume_flow' )
	265	READ ( 13 ) conserve_volume_flow
[241]	266	CASE ( 'conserve_volume_flow_mode' )
	267	READ ( 13 ) conserve_volume_flow_mode
[291]	268	CASE ( 'coupling_start_time' )
	269	READ ( 13 ) coupling_start_time
[153]	270	CASE ( 'cthf' )
	271	READ ( 13 ) cthf
[1]	272	CASE ( 'current_timestep_number' )
	273	READ ( 13 ) current_timestep_number
	274	CASE ( 'cut_spline_overshoot' )
	275	READ ( 13 ) cut_spline_overshoot
	276	CASE ( 'damp_level_1d' )
	277	READ ( 13 ) damp_level_1d
	278	CASE ( 'dissipation_1d' )
	279	READ ( 13 ) dissipation_1d
[240]	280	CASE ( 'dp_external' )
	281	READ ( 13 ) dp_external
	282	CASE ( 'dp_level_b' )
	283	READ ( 13 ) dp_level_b
	284	CASE ( 'dp_smooth' )
	285	READ ( 13 ) dp_smooth
	286	CASE ( 'dpdxy' )
	287	READ ( 13 ) dpdxy
[138]	288	CASE ( 'drag_coefficient' )
	289	READ ( 13 ) drag_coefficient
[1]	290	CASE ( 'dt_fixed' )
[336]	291	READ ( 13 ) ldum ! restart files created before rev 333
	292	! contained dt_fixed by mistake; it is still
	293	! read here in order to allow usage of these
	294	! older restart files; can be removed in a
	295	! later version
[1]	296	CASE ( 'dt_pr_1d' )
	297	READ ( 13 ) dt_pr_1d
	298	CASE ( 'dt_run_control_1d' )
	299	READ ( 13 ) dt_run_control_1d
	300	CASE ( 'dt_3d' )
	301	READ ( 13 ) dt_3d
	302	CASE ( 'dvrp_filecount' )
	303	READ ( 13 ) dvrp_filecount
	304	CASE ( 'dx' )
	305	READ ( 13 ) dx
	306	CASE ( 'dy' )
	307	READ ( 13 ) dy
	308	CASE ( 'dz' )
	309	READ ( 13 ) dz
	310	CASE ( 'dz_max' )
	311	READ ( 13 ) dz_max
	312	CASE ( 'dz_stretch_factor' )
	313	READ ( 13 ) dz_stretch_factor
	314	CASE ( 'dz_stretch_level' )
	315	READ ( 13 ) dz_stretch_level
	316	CASE ( 'e_min' )
	317	READ ( 13 ) e_min
	318	CASE ( 'end_time_1d' )
	319	READ ( 13 ) end_time_1d
	320	CASE ( 'fft_method' )
	321	READ ( 13 ) fft_method
	322	CASE ( 'first_call_advec_particles' )
	323	READ ( 13 ) first_call_advec_particles
	324	CASE ( 'galilei_transformation' )
	325	READ ( 13 ) galilei_transformation
	326	CASE ( 'grid_matching' )
	327	READ ( 13 ) grid_matching
	328	CASE ( 'hom' )
	329	READ ( 13 ) hom
[143]	330	CASE ( 'hom_sum' )
	331	READ ( 13 ) hom_sum
[151]	332	CASE ( 'humidity' )
	333	READ ( 13 ) humidity
	334	CASE ( 'inflow_damping_factor' )
	335	IF ( .NOT. ALLOCATED( inflow_damping_factor ) ) THEN
	336	ALLOCATE( inflow_damping_factor(0:nz+1) )
	337	ENDIF
	338	READ ( 13 ) inflow_damping_factor
	339	CASE ( 'inflow_damping_height' )
	340	READ ( 13 ) inflow_damping_height
	341	CASE ( 'inflow_damping_width' )
	342	READ ( 13 ) inflow_damping_width
[1]	343	CASE ( 'inflow_disturbance_begin' )
	344	READ ( 13 ) inflow_disturbance_begin
	345	CASE ( 'inflow_disturbance_end' )
	346	READ ( 13 ) inflow_disturbance_end
	347	CASE ( 'km_constant' )
	348	READ ( 13 ) km_constant
	349	CASE ( 'km_damp_max' )
	350	READ ( 13 ) km_damp_max
[138]	351	CASE ( 'lad' )
	352	READ ( 13 ) lad
	353	CASE ( 'lad_surface' )
	354	READ ( 13 ) lad_surface
	355	CASE ( 'lad_vertical_gradient' )
	356	READ ( 13 ) lad_vertical_gradient
	357	CASE ( 'lad_vertical_gradient_level' )
	358	READ ( 13 ) lad_vertical_gradient_level
	359	CASE ( 'lad_vertical_gradient_level_in' )
	360	READ ( 13 ) lad_vertical_gradient_level_ind
[1]	361	CASE ( 'last_dt_change' )
	362	READ ( 13 ) last_dt_change
[411]	363	CASE ( 'large_scale_subsidence' )
	364	READ ( 13 ) large_scale_subsidence
[153]	365	CASE ( 'leaf_surface_concentration' )
	366	READ ( 13 ) leaf_surface_concentration
[1]	367	CASE ( 'long_filter_factor' )
	368	READ ( 13 ) long_filter_factor
[63]	369	CASE ( 'loop_optimization' )
	370	READ ( 13 ) loop_optimization
[151]	371	CASE ( 'mean_inflow_profiles' )
	372	IF ( .NOT. ALLOCATED( mean_inflow_profiles ) ) THEN
	373	ALLOCATE( mean_inflow_profiles(0:nz+1,5) )
	374	ENDIF
	375	READ ( 13 ) mean_inflow_profiles
[1]	376	CASE ( 'mixing_length_1d' )
	377	READ ( 13 ) mixing_length_1d
	378	CASE ( 'momentum_advec' )
	379	READ ( 13 ) momentum_advec
	380	CASE ( 'netcdf_precision' )
	381	READ ( 13 ) netcdf_precision
	382	CASE ( 'nsor_ini' )
	383	READ ( 13 ) nsor_ini
	384	CASE ( 'nx' )
	385	READ ( 13 ) nx
[147]	386	nx_on_file = nx
[1]	387	CASE ( 'ny' )
	388	READ ( 13 ) ny
[147]	389	ny_on_file = ny
[94]	390	CASE ( 'ocean' )
	391	READ ( 13 ) ocean
[1]	392	CASE ( 'old_dt' )
	393	READ ( 13 ) old_dt
	394	CASE ( 'omega' )
	395	READ ( 13 ) omega
	396	CASE ( 'outflow_damping_width' )
	397	READ ( 13 ) outflow_damping_width
[345]	398	CASE ( 'output_for_t0' )
	399	READ (13) output_for_t0
[1]	400	CASE ( 'overshoot_limit_e' )
	401	READ ( 13 ) overshoot_limit_e
	402	CASE ( 'overshoot_limit_pt' )
	403	READ ( 13 ) overshoot_limit_pt
	404	CASE ( 'overshoot_limit_u' )
	405	READ ( 13 ) overshoot_limit_u
	406	CASE ( 'overshoot_limit_v' )
	407	READ ( 13 ) overshoot_limit_v
	408	CASE ( 'overshoot_limit_w' )
	409	READ ( 13 ) overshoot_limit_w
	410	CASE ( 'passive_scalar' )
	411	READ ( 13 ) passive_scalar
[138]	412	CASE ( 'pch_index' )
	413	READ ( 13 ) pch_index
[1]	414	CASE ( 'phi' )
	415	READ ( 13 ) phi
[138]	416	CASE ( 'plant_canopy' )
	417	READ ( 13 ) plant_canopy
[1]	418	CASE ( 'prandtl_layer' )
	419	READ ( 13 ) prandtl_layer
	420	CASE ( 'precipitation' )
	421	READ ( 13 ) precipitation
	422	CASE ( 'pt_init' )
	423	READ ( 13 ) pt_init
[57]	424	CASE ( 'pt_reference' )
	425	READ ( 13 ) pt_reference
[1]	426	CASE ( 'pt_surface' )
	427	READ ( 13 ) pt_surface
	428	CASE ( 'pt_surface_initial_change' )
	429	READ ( 13 ) pt_surface_initial_change
	430	CASE ( 'pt_vertical_gradient' )
	431	READ ( 13 ) pt_vertical_gradient
	432	CASE ( 'pt_vertical_gradient_level' )
	433	READ ( 13 ) pt_vertical_gradient_level
	434	CASE ( 'pt_vertical_gradient_level_ind' )
	435	READ ( 13 ) pt_vertical_gradient_level_ind
	436	CASE ( 'q_init' )
	437	READ ( 13 ) q_init
	438	CASE ( 'q_surface' )
	439	READ ( 13 ) q_surface
	440	CASE ( 'q_surface_initial_change' )
	441	READ ( 13 ) q_surface_initial_change
	442	CASE ( 'q_vertical_gradient' )
	443	READ ( 13 ) q_vertical_gradient
	444	CASE ( 'q_vertical_gradient_level' )
	445	READ ( 13 ) q_vertical_gradient_level
	446	CASE ( 'q_vertical_gradient_level_ind' )
	447	READ ( 13 ) q_vertical_gradient_level_ind
	448	CASE ( 'radiation' )
	449	READ ( 13 ) radiation
	450	CASE ( 'random_generator' )
	451	READ ( 13 ) random_generator
	452	CASE ( 'random_heatflux' )
	453	READ ( 13 ) random_heatflux
[151]	454	CASE ( 'recycling_width' )
	455	READ ( 13 ) recycling_width
[1]	456	CASE ( 'rif_max' )
	457	READ ( 13 ) rif_max
	458	CASE ( 'rif_min' )
	459	READ ( 13 ) rif_min
	460	CASE ( 'roughness_length' )
	461	READ ( 13 ) roughness_length
	462	CASE ( 'runnr' )
	463	READ ( 13 ) runnr
[291]	464	CASE ( 'run_coupled' )
	465	READ ( 13 ) run_coupled
[94]	466	CASE ( 'sa_init' )
	467	READ ( 13 ) sa_init
	468	CASE ( 'sa_surface' )
	469	READ ( 13 ) sa_surface
	470	CASE ( 'sa_vertical_gradient' )
	471	READ ( 13 ) sa_vertical_gradient
	472	CASE ( 'sa_vertical_gradient_level' )
	473	READ ( 13 ) sa_vertical_gradient_level
[1]	474	CASE ( 'scalar_advec' )
	475	READ ( 13 ) scalar_advec
[153]	476	CASE ( 'scalar_exchange_coefficient' )
	477	READ ( 13 ) scalar_exchange_coefficient
[1]	478	CASE ( 'simulated_time' )
	479	READ ( 13 ) simulated_time
	480	CASE ( 'surface_heatflux' )
	481	READ ( 13 ) surface_heatflux
	482	CASE ( 'surface_pressure' )
	483	READ ( 13 ) surface_pressure
	484	CASE ( 'surface_scalarflux' )
	485	READ ( 13 ) surface_scalarflux
	486	CASE ( 'surface_waterflux' )
	487	READ ( 13 ) surface_waterflux
	488	CASE ( 's_surface' )
	489	READ ( 13 ) s_surface
	490	CASE ( 's_surface_initial_change' )
	491	READ ( 13 ) s_surface_initial_change
	492	CASE ( 's_vertical_gradient' )
	493	READ ( 13 ) s_vertical_gradient
	494	CASE ( 's_vertical_gradient_level' )
	495	READ ( 13 ) s_vertical_gradient_level
[102]	496	CASE ( 'time_coupling' )
	497	READ ( 13 ) time_coupling
[1]	498	CASE ( 'time_disturb' )
	499	READ ( 13 ) time_disturb
[587]	500	CASE ( 'time_dopr' )
[1]	501	READ ( 13 ) time_dopr
[587]	502	CASE ( 'time_domask' )
	503	READ ( 13 ) time_domask
[1]	504	CASE ( 'time_dopr_av' )
	505	READ ( 13 ) time_dopr_av
	506	CASE ( 'time_dopr_listing' )
	507	READ ( 13 ) time_dopr_listing
	508	CASE ( 'time_dopts' )
	509	READ ( 13 ) time_dopts
	510	CASE ( 'time_dosp' )
	511	READ ( 13 ) time_dosp
	512	CASE ( 'time_dots' )
	513	READ ( 13 ) time_dots
	514	CASE ( 'time_do2d_xy' )
	515	READ ( 13 ) time_do2d_xy
	516	CASE ( 'time_do2d_xz' )
	517	READ ( 13 ) time_do2d_xz
	518	CASE ( 'time_do2d_yz' )
	519	READ ( 13 ) time_do2d_yz
	520	CASE ( 'time_do3d' )
	521	READ ( 13 ) time_do3d
	522	CASE ( 'time_do_av' )
	523	READ ( 13 ) time_do_av
	524	CASE ( 'time_do_sla' )
	525	READ ( 13 ) time_do_sla
	526	CASE ( 'time_dvrp' )
	527	READ ( 13 ) time_dvrp
	528	CASE ( 'time_restart' )
	529	READ ( 13 ) time_restart
	530	CASE ( 'time_run_control' )
	531	READ ( 13 ) time_run_control
[291]	532	CASE ( 'time_since_reference_point' )
	533	READ ( 13 ) time_since_reference_point
[116]	534	CASE ( 'time_sort_particles' )
	535	READ ( 13 ) time_sort_particles
[1]	536	CASE ( 'timestep_scheme' )
	537	READ ( 13 ) timestep_scheme
	538	CASE ( 'topography' )
	539	READ ( 13 ) topography
[256]	540	CASE ( 'topography_grid_convention' )
	541	READ ( 13 ) topography_grid_convention
[19]	542	CASE ( 'top_heatflux' )
	543	READ ( 13 ) top_heatflux
[102]	544	CASE ( 'top_momentumflux_u' )
	545	READ ( 13 ) top_momentumflux_u
	546	CASE ( 'top_momentumflux_v' )
	547	READ ( 13 ) top_momentumflux_v
[94]	548	CASE ( 'top_salinityflux' )
	549	READ ( 13 ) top_salinityflux
[1]	550	CASE ( 'tsc' )
	551	READ ( 13 ) tsc
[151]	552	CASE ( 'turbulent_inflow' )
	553	READ ( 13 ) turbulent_inflow
[241]	554	CASE ( 'u_bulk' )
	555	READ ( 13 ) u_bulk
[1]	556	CASE ( 'u_init' )
	557	READ ( 13 ) u_init
	558	CASE ( 'u_max' )
	559	READ ( 13 ) u_max
	560	CASE ( 'u_max_ijk' )
	561	READ ( 13 ) u_max_ijk
	562	CASE ( 'ug' )
	563	READ ( 13 ) ug
	564	CASE ( 'ug_surface' )
	565	READ ( 13 ) ug_surface
	566	CASE ( 'ug_vertical_gradient' )
	567	READ ( 13 ) ug_vertical_gradient
	568	CASE ( 'ug_vertical_gradient_level' )
	569	READ ( 13 ) ug_vertical_gradient_level
	570	CASE ( 'ug_vertical_gradient_level_ind' )
	571	READ ( 13 ) ug_vertical_gradient_level_ind
	572	CASE ( 'ups_limit_e' )
	573	READ ( 13 ) ups_limit_e
	574	CASE ( 'ups_limit_pt' )
	575	READ ( 13 ) ups_limit_pt
	576	CASE ( 'ups_limit_u' )
	577	READ ( 13 ) ups_limit_u
	578	CASE ( 'ups_limit_v' )
	579	READ ( 13 ) ups_limit_v
	580	CASE ( 'ups_limit_w' )
	581	READ ( 13 ) ups_limit_w
	582	CASE ( 'use_surface_fluxes' )
	583	READ ( 13 ) use_surface_fluxes
[20]	584	CASE ( 'use_top_fluxes' )
	585	READ ( 13 ) use_top_fluxes
[1]	586	CASE ( 'use_ug_for_galilei_tr' )
	587	READ ( 13 ) use_ug_for_galilei_tr
	588	CASE ( 'use_upstream_for_tke' )
	589	READ ( 13 ) use_upstream_for_tke
[241]	590	CASE ( 'v_bulk' )
	591	READ ( 13 ) v_bulk
[1]	592	CASE ( 'v_init' )
	593	READ ( 13 ) v_init
	594	CASE ( 'v_max' )
	595	READ ( 13 ) v_max
	596	CASE ( 'v_max_ijk' )
	597	READ ( 13 ) v_max_ijk
	598	CASE ( 'vg' )
	599	READ ( 13 ) vg
	600	CASE ( 'vg_surface' )
	601	READ ( 13 ) vg_surface
	602	CASE ( 'vg_vertical_gradient' )
	603	READ ( 13 ) vg_vertical_gradient
	604	CASE ( 'vg_vertical_gradient_level' )
	605	READ ( 13 ) vg_vertical_gradient_level
	606	CASE ( 'vg_vertical_gradient_level_ind' )
	607	READ ( 13 ) vg_vertical_gradient_level_ind
[143]	608	CASE ( 'volume_flow_area' )
	609	READ ( 13 ) volume_flow_area
	610	CASE ( 'volume_flow_initial' )
	611	READ ( 13 ) volume_flow_initial
[1]	612	CASE ( 'wall_adjustment' )
	613	READ ( 13 ) wall_adjustment
[580]	614	CASE ( 'subs_vertical_gradient' )
	615	READ ( 13 ) subs_vertical_gradient
	616	CASE ( 'subs_vertical_gradient_level' )
	617	READ ( 13 ) subs_vertical_gradient_level
	618	CASE ( 'subs_vertical_gradient_level_i' )
	619	READ ( 13 ) subs_vertical_gradient_level_i
[1]	620	CASE ( 'w_max' )
	621	READ ( 13 ) w_max
	622	CASE ( 'w_max_ijk' )
	623	READ ( 13 ) w_max_ijk
	624
	625	CASE DEFAULT
[257]	626	WRITE( message_string, * ) 'unknown variable named "', &
	627	TRIM( variable_chr ), '" found in', &
	628	' data from prior run on PE ', myid
	629	CALL message( 'read_var_list', 'PA0302', 1, 2, 0, 6, 0 )
[1]	630	END SELECT
	631	!
	632	!-- Read next string
	633	READ ( 13 ) variable_chr
	634
	635	ENDDO
	636
	637
[146]	638	END SUBROUTINE read_var_list
[143]	639
[146]	640
	641
[147]	642	SUBROUTINE read_parts_of_var_list
	643
	644	!------------------------------------------------------------------------------!
	645	! Description:
	646	! ------------
	647	! Skipping the global control variables from restart-file (binary format)
	648	! except some informations needed when reading restart data from a previous
[151]	649	! run which used a smaller total domain or/and a different domain decomposition.
[147]	650	!------------------------------------------------------------------------------!
	651
[151]	652	USE arrays_3d
[147]	653	USE control_parameters
	654	USE indices
	655	USE pegrid
	656	USE statistics
	657
	658	IMPLICIT NONE
	659
	660	CHARACTER (LEN=10) :: version_on_file
	661	CHARACTER (LEN=30) :: variable_chr
	662
	663	INTEGER :: idum, max_pr_user_on_file, nz_on_file, &
[170]	664	statistic_regions_on_file, tmp_mpru, tmp_sr
[147]	665
[151]	666	REAL, DIMENSION(:,:,:), ALLOCATABLE :: hom_sum_on_file
[147]	667	REAL, DIMENSION(:,:,:,:), ALLOCATABLE :: hom_on_file
	668
	669
	670	CALL check_open( 13 )
	671
	672	WRITE (9,*) 'rpovl: after check open 13'
	673	CALL local_flush( 9 )
	674	READ ( 13 ) version_on_file
	675
	676	!
	677	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
	678	!-- run
	679	READ ( 13 ) variable_chr
	680	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
[274]	681	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
	682	'run on PE ', myid
[257]	683	CALL message( 'read_parts_of_var_list', 'PA0297', 1, 2, 0, 6, 0 )
[147]	684	ENDIF
	685	READ ( 13 ) numprocs_previous_run
	686
	687	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
	688	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
	689	ENDIF
	690
	691	READ ( 13 ) variable_chr
	692	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
[257]	693	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
	694	'prior run on PE ', myid
	695	CALL message( 'read_parts_of_var_list', 'PA0298', 1, 2, 0, 6, 0 )
[147]	696	ENDIF
	697	READ ( 13 ) hor_index_bounds_previous_run
	698
	699	!
	700	!-- Read vertical number of gridpoints and number of different areas used
	701	!-- for computing statistics. Allocate arrays depending on these values,
	702	!-- which are needed for the following read instructions.
	703	READ ( 13 ) variable_chr
	704	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
[257]	705	message_string = 'nz not found in restart data file'
	706	CALL message( 'read_parts_of_var_list', 'PA0303', 1, 2, 0, 6, 0 )
[147]	707	ENDIF
	708	READ ( 13 ) nz_on_file
	709	IF ( nz_on_file /= nz ) THEN
[257]	710	WRITE( message_string, * ) 'mismatch concerning number of ', &
[274]	711	'gridpoints along z', &
	712	'&nz on file = "', nz_on_file, '"', &
	713	'&nz from run = "', nz, '"'
[257]	714	CALL message( 'read_parts_of_var_list', 'PA0304', 1, 2, 0, 6, 0 )
[147]	715	ENDIF
	716
	717	READ ( 13 ) variable_chr
	718	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
[257]	719	message_string = 'max_pr_user not found in restart data file'
	720	CALL message( 'read_parts_of_var_list', 'PA0305', 1, 2, 0, 6, 0 )
[147]	721	ENDIF
	722	READ ( 13 ) max_pr_user_on_file
[170]	723	IF ( max_pr_user_on_file /= max_pr_user ) THEN
[274]	724	WRITE( message_string, * ) 'number of user profiles on res', &
	725	'tart data file differs from the current ', &
	726	'run&max_pr_user on file = "', &
	727	max_pr_user_on_file, '"', &
	728	'&max_pr_user from run = "', &
[257]	729	max_pr_user, '"'
	730	CALL message( 'read_parts_of_var_list', 'PA0306', 0, 0, 0, 6, 0 )
[170]	731	tmp_mpru = MIN( max_pr_user_on_file, max_pr_user )
	732	ELSE
	733	tmp_mpru = max_pr_user
[147]	734	ENDIF
	735
	736	READ ( 13 ) variable_chr
	737	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
[257]	738	message_string = 'statistic_regions not found in restart data file'
	739	CALL message( 'read_parts_of_var_list', 'PA0307', 1, 2, 0, 6, 0 )
[147]	740	ENDIF
	741	READ ( 13 ) statistic_regions_on_file
[173]	742	IF ( statistic_regions_on_file /= statistic_regions ) THEN
[274]	743	WRITE( message_string, * ) 'statistic regions on restart data file ',&
	744	'differ from the current run', &
	745	'&statistic regions on file = "', &
	746	statistic_regions_on_file, '"', &
	747	'&statistic regions from run = "', &
	748	statistic_regions, '"', &
[257]	749	'&statistic data may be lost!'
	750	CALL message( 'read_parts_of_var_list', 'PA0308', 0, 1, 0, 6, 0 )
[170]	751	tmp_sr = MIN( statistic_regions_on_file, statistic_regions )
	752	ELSE
	753	tmp_sr = statistic_regions
[147]	754	ENDIF
	755
	756
	757	!
	758	!-- Now read and check some control parameters and skip the rest
	759	WRITE (9,*) 'wpovl: begin reading variables'
	760	CALL local_flush( 9 )
	761	READ ( 13 ) variable_chr
	762
	763	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	764
	765	SELECT CASE ( TRIM( variable_chr ) )
	766
[151]	767	CASE ( 'average_count_pr' )
	768	READ ( 13 ) average_count_pr
[257]	769	IF ( average_count_pr /= 0 ) THEN
[274]	770	WRITE( message_string, * ) 'inflow profiles not temporally ', &
	771	'averaged. &Averaging will be done now using ', &
	772	average_count_pr, ' samples.'
	773	CALL message( 'read_parts_of_var_list', 'PA0309', &
	774	0, 1, 0, 6, 0 )
[151]	775	ENDIF
	776
[147]	777	CASE ( 'hom' )
	778	ALLOCATE( hom_on_file(0:nz+1,2,pr_palm+max_pr_user_on_file, &
	779	0:statistic_regions_on_file) )
	780	READ ( 13 ) hom_on_file
[170]	781	hom(:,:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
	782	hom_on_file(:,:,1:pr_palm+tmp_mpru,0:tmp_sr)
[147]	783	DEALLOCATE( hom_on_file )
	784
[151]	785	CASE ( 'hom_sum' )
	786	ALLOCATE( hom_sum_on_file(0:nz+1,pr_palm+max_pr_user_on_file, &
	787	0:statistic_regions_on_file) )
	788	READ ( 13 ) hom_sum_on_file
[170]	789	hom_sum(:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
	790	hom_sum_on_file(:,1:pr_palm+tmp_mpru,0:tmp_sr)
[151]	791	DEALLOCATE( hom_sum_on_file )
	792
[147]	793	CASE ( 'nx' )
	794	READ ( 13 ) nx_on_file
	795
	796	CASE ( 'ny' )
	797	READ ( 13 ) ny_on_file
	798
	799
	800	CASE DEFAULT
	801
	802	READ ( 13 ) idum
	803
	804	END SELECT
	805
	806	READ ( 13 ) variable_chr
	807
	808	ENDDO
	809
[151]	810	!
	811	!-- Calculate the temporal average of vertical profiles, if neccessary
	812	IF ( average_count_pr /= 0 ) THEN
	813	hom_sum = hom_sum / REAL( average_count_pr )
	814	ENDIF
[147]	815
[151]	816
[147]	817	END SUBROUTINE read_parts_of_var_list
	818
	819
	820
[146]	821	SUBROUTINE skip_var_list
	822
	823	!------------------------------------------------------------------------------!
	824	! Description:
	825	! ------------
	826	! Skipping the global control variables from restart-file (binary format)
	827	!------------------------------------------------------------------------------!
	828
[147]	829	IMPLICIT NONE
	830
[146]	831	CHARACTER (LEN=10) :: version_on_file
	832	CHARACTER (LEN=30) :: variable_chr
	833
	834	INTEGER :: idum
	835
	836
[147]	837	WRITE (9,*) 'skipvl #1'
	838	CALL local_flush( 9 )
[146]	839	READ ( 13 ) version_on_file
	840
[147]	841	WRITE (9,*) 'skipvl before variable_chr'
	842	CALL local_flush( 9 )
[146]	843	READ ( 13 ) variable_chr
[147]	844	WRITE (9,*) 'skipvl after variable_chr'
	845	CALL local_flush( 9 )
[146]	846
	847	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	848
[147]	849	WRITE (9,*) 'skipvl chr = ', variable_chr
	850	CALL local_flush( 9 )
[146]	851	READ ( 13 ) idum
	852	READ ( 13 ) variable_chr
	853
	854	ENDDO
[147]	855	WRITE (9,*) 'skipvl last'
	856	CALL local_flush( 9 )
[146]	857
	858
	859	END SUBROUTINE skip_var_list

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |