Home

Context Navigation

source: palm/trunk/SOURCE/read_var_list.f90 @ 2339

Last change on this file since 2339 was 2339, checked in by gronemeier, 7 years ago
corrected timestamp in header
Property svn:keywords set to `Id`
File size: 39.6 KB

Rev	Line
[1682]	1	!> @file read_var_list.f90
[2000]	2	!------------------------------------------------------------------------------!
[1036]	3	! This file is part of PALM.
	4	!
[2000]	5	! PALM is free software: you can redistribute it and/or modify it under the
	6	! terms of the GNU General Public License as published by the Free Software
	7	! Foundation, either version 3 of the License, or (at your option) any later
	8	! version.
[1036]	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
[2101]	17	! Copyright 1997-2017 Leibniz Universitaet Hannover
[2000]	18	!------------------------------------------------------------------------------!
[1036]	19	!
[257]	20	! Current revisions:
[622]	21	! ------------------
[2233]	22	!
	23	!
	24	! Former revisions:
	25	! -----------------
	26	! $Id: read_var_list.f90 2339 2017-08-07 13:55:26Z gronemeier $
[2339]	27	! corrected timestamp in header
	28	!
	29	! 2338 2017-08-07 12:15:38Z gronemeier
[2338]	30	! Modularize 1D model
	31	!
[2339]	32	! 2320 2017-07-21 12:47:43Z suehring
[2320]	33	! Formatting adjustment
	34	!
	35	! 2265 2017-06-08 16:58:28Z schwenkel
[2265]	36	! Unused variables removed.
	37	!
	38	! 2259 2017-06-08 09:09:11Z gronemeier
[2259]	39	! Implemented synthetic turbulence generator
[2233]	40	!
[2259]	41	! 2233 2017-05-30 18:08:54Z suehring
	42	!
[2233]	43	! 2232 2017-05-30 17:47:52Z suehring
[2232]	44	! Replace wall_qflux, wall_sflux by wall_humidityflux and wall_scalarflux; add
	45	! wall_salinityflux
[2259]	46	! +tunnel_height, tunnel_length, tunnel_width_x, tunnel_width_y,
[2232]	47	! tunnel_wall_depth
	48	!
[2043]	49	! 2042 2016-11-02 13:47:31Z suehring
	50	! Bugfix, read restart data for wall_heatflux, wall_qflux and wall_sflux
[2259]	51	!
[2001]	52	! 2000 2016-08-20 18:09:15Z knoop
	53	! Forced header and separation lines into 80 columns
[2259]	54	!
[1993]	55	! 1992 2016-08-12 15:14:59Z suehring
	56	! top_scalarflux added
[2259]	57	!
[1961]	58	! 1960 2016-07-12 16:34:24Z suehring
	59	! Separate humidity and passive scalar
	60	! Remove unused variables from ONLY list
	61	!
[1958]	62	! 1957 2016-07-07 10:43:48Z suehring
	63	! flight module added
	64	!
[1851]	65	! 1849 2016-04-08 11:33:18Z hoffmann
	66	! Adapted for modularization of microphysics
	67	!
[1834]	68	! 1833 2016-04-07 14:23:03Z raasch
	69	! spectra_mod added
	70	!
[1832]	71	! 1831 2016-04-07 13:15:51Z hoffmann
	72	! turbulence renamed collision_turbulence, drizzle renamed
	73	! cloud_water_sedimentation
	74	!
[1809]	75	! 1808 2016-04-05 19:44:00Z raasch
	76	! test output removed
	77	!
[1784]	78	! 1783 2016-03-06 18:36:17Z raasch
	79	! netcdf module name changed + related changes
	80	!
[1700]	81	! 1699 2015-10-29 08:02:35Z maronga
	82	! Bugfix: update of binary version from 3.9b to 4.0 was missing
[2259]	83	!
[1692]	84	! 1691 2015-10-26 16:17:44Z maronga
[2259]	85	! Added output of most_method, constant_flux_layer, zeta_min, zeta_max. Removed
[1692]	86	! output of prandtl_layer and rif_min, rif_max.
[2259]	87	!
[1683]	88	! 1682 2015-10-07 23:56:08Z knoop
	89	! Code annotations made doxygen readable
[2259]	90	!
[1616]	91	! 1615 2015-07-08 18:49:19Z suehring
	92	! Enable turbulent inflow for passive_scalar and humidity
	93	!
[1586]	94	! 1585 2015-04-30 07:05:52Z maronga
	95	! Adapted for RRTMG
[2259]	96	!
[1561]	97	! 1560 2015-03-06 10:48:54Z keck
	98	! +recycling_yshift
[2259]	99	!
[1523]	100	! 1522 2015-01-14 10:53:12Z keck
	101	! added query for checking if the advection scheme in the restart run is the
	102	! same as the advection scheme in the corresponding initial run
[2259]	103	!
[1503]	104	! 1502 2014-12-03 18:22:31Z kanani
[2259]	105	! Canopy module and parameters removed (parameters are always read from
[1503]	106	! canopy_par NAMELIST for initial and restart runs)
[2259]	107	!
[1497]	108	! 1496 2014-12-02 17:25:50Z maronga
	109	! Renamed "radiation" -> "cloud_top_radiation"
[2259]	110	!
[1485]	111	! 1484 2014-10-21 10:53:05Z kanani
[1484]	112	! Changes in the course of the canopy-model modularization:
	113	! parameters alpha_lad, beta_lad, lai_beta added,
	114	! module plant_canopy_model_mod added,
	115	! drag_coefficient, leaf_surface_concentration and scalar_exchange_coefficient
	116	! renamed to canopy_drag_coeff, leaf_surface_conc and leaf_scalar_exch_coeff
[1321]	117	!
[1323]	118	! 1322 2014-03-20 16:38:49Z raasch
	119	! REAL functions provided with KIND-attribute
	120	!
[1321]	121	! 1320 2014-03-20 08:40:49Z raasch
[1320]	122	! ONLY-attribute added to USE-statements,
	123	! kind-parameters added to all INTEGER and REAL declaration statements,
	124	! kinds are defined in new module kinds,
	125	! old module precision_kind is removed,
	126	! revision history before 2012 removed,
	127	! comment fields (!:) to be used for variable explanations added to
	128	! all variable declaration statements
[1054]	129	!
[1309]	130	! 1308 2014-03-13 14:58:42Z fricke
	131	! +do2d_xy_time_count, do2d_xz_time_count, do2d_yz_time_count,
	132	! +do3d_time_count
	133	!
[1254]	134	! 1253 2013-11-07 10:48:12Z fricke
[2259]	135	! Bugfix: add ref_state to read_parts_of_var_list, otherwise ref_state
[1254]	136	! is zero for initializing_actions = 'cyclic_fill'
	137	!
[1242]	138	! 1241 2013-10-30 11:36:58Z heinze
	139	! +nudging
	140	! +large_scale_forcing
	141	!
[1196]	142	! 1195 2013-07-01 12:27:57Z heinze
	143	! Bugfix: allocate ref_state
	144	!
[1182]	145	! 1179 2013-06-14 05:57:58Z raasch
	146	! +ref_state
	147	!
[1116]	148	! 1115 2013-03-26 18:16:16Z hoffmann
	149	! unused variables removed
	150	!
[1093]	151	! 1092 2013-02-02 11:24:22Z raasch
	152	! unused variables removed
	153	!
[1066]	154	! 1065 2012-11-22 17:42:36Z hoffmann
	155	! +nc, c_sedimentation, limiter_sedimentation, turbulence
	156	! -mu_constant, mu_constant_value
	157	!
[1054]	158	! 1053 2012-11-13 17:11:03Z hoffmann
[2259]	159	! necessary expansions according to the two new prognostic equations (nr, qr)
[1053]	160	! of the two-moment cloud physics scheme:
	161	! +bc__b, +bc__t, +bc__t_val, _init, _surface, _surface_initial_change,
	162	! +_vertical_gradient, +_vertical_gradient_level, *_vertical_gradient_level_ind,
	163	! +surface_waterflux_*
[601]	164	!
[2259]	165	! in addition, steering parameters parameters of the two-moment cloud physics
	166	! scheme:
[1053]	167	! +cloud_scheme, +drizzle, +mu_constant, +mu_constant_value, +ventilation_effect
[1017]	168	!
[1037]	169	! 1036 2012-10-22 13:43:42Z raasch
	170	! code put under GPL (PALM 3.9)
	171	!
[1017]	172	! 1015 2012-09-27 09:23:24Z raasch
	173	! -adjust_mixing_length
	174	!
[1004]	175	! 1003 2012-09-14 14:35:53Z raasch
	176	! -grid_matching
	177	!
[1002]	178	! 1001 2012-09-13 14:08:46Z raasch
	179	! -cut_spline_overshoot, dt_fixed, last_dt_change, long_filter_factor,
	180	! overshoot_limit_, ups_limit_
	181	!
[979]	182	! 978 2012-08-09 08:28:32Z fricke
	183	! -km_damp_max, outflow_damping_width
	184	! +pt_damping_factor, pt_damping_width
	185	! +z0h_factor
	186	!
[941]	187	! 940 2012-07-09 14:31:00Z raasch
	188	! +neutral
	189	!
[928]	190	! 927 2012-06-06 19:15:04Z raasch
	191	! +masking_method
	192	!
[850]	193	! 849 2012-03-15 10:35:09Z raasch
	194	! first_call_advec_particles renamed first_call_lpm
	195	!
[826]	196	! 824 2012-02-17 09:09:57Z raasch
	197	! +curvature_solution_effects
	198	!
[1]	199	! Revision 1.1 1998/03/18 20:18:48 raasch
	200	! Initial revision
	201	!
	202	!
	203	! Description:
	204	! ------------
[1682]	205	!> Reading values of global control variables from restart-file (binary format)
[1]	206	!------------------------------------------------------------------------------!
[1682]	207	SUBROUTINE read_var_list
[1]	208
[2259]	209
[1320]	210	USE arrays_3d, &
[1484]	211	ONLY: inflow_damping_factor, mean_inflow_profiles, pt_init, &
[1960]	212	q_init, ref_state, s_init, sa_init, u_init, ug, v_init, vg
[1320]	213
[87]	214	USE control_parameters
[1320]	215
[1957]	216	USE flight_mod, &
	217	ONLY: flight_read_restart_data
[2259]	218
[1320]	219	USE grid_variables, &
	220	ONLY: dx, dy
	221
	222	USE indices, &
	223	ONLY: nz, nx, nx_on_file, ny, ny_on_file
	224
[1849]	225	USE microphysics_mod, &
	226	ONLY: c_sedimentation, collision_turbulence, &
	227	cloud_water_sedimentation, limiter_sedimentation, &
	228	nc_const, ventilation_effect
	229
[2338]	230	USE model_1d_mod, &
[1320]	231	ONLY: damp_level_1d, dt_pr_1d, dt_run_control_1d, end_time_1d
	232
[1783]	233	USE netcdf_interface, &
	234	ONLY: netcdf_precision, output_for_t0
[1320]	235
	236	USE particle_attributes, &
[2265]	237	ONLY: curvature_solution_effects
[1320]	238
[1]	239	USE pegrid
	240
[1585]	241	USE radiation_model_mod, &
[1833]	242	ONLY: time_radiation
[1585]	243
[1833]	244	USE spectra_mod, &
	245	ONLY: average_count_sp
	246
[1320]	247	USE statistics, &
	248	ONLY: statistic_regions, hom, hom_sum, pr_palm, u_max, u_max_ijk, &
	249	v_max, v_max_ijk, w_max, w_max_ijk
	250
[2259]	251	USE synthetic_turbulence_generator_mod, &
	252	ONLY: stg_read_restart_data
[1691]	253
[1]	254	IMPLICIT NONE
	255
	256	CHARACTER (LEN=10) :: binary_version, version_on_file
	257	CHARACTER (LEN=30) :: variable_chr
[87]	258
[143]	259
[1]	260	CALL check_open( 13 )
	261
	262	!
	263	!-- Make version number check first
	264	READ ( 13 ) version_on_file
[1831]	265	binary_version = '4.1'
[1]	266	IF ( TRIM( version_on_file ) /= TRIM( binary_version ) ) THEN
[257]	267	WRITE( message_string, * ) 'version mismatch concerning control ', &
	268	'variables', &
	269	'&version on file = "', &
	270	TRIM( version_on_file ), '"', &
	271	'&version on program = "', &
	272	TRIM( binary_version ), '"'
	273	CALL message( 'read_var_list', 'PA0296', 1, 2, 0, 6, 0 )
[1]	274	ENDIF
	275
	276	!
[145]	277	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
	278	!-- run
	279	READ ( 13 ) variable_chr
	280	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
[274]	281	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
	282	'run on PE ', myid
[257]	283	CALL message( 'read_var_list', 'PA0297', 1, 2, 0, 6, 0 )
[145]	284	ENDIF
	285	READ ( 13 ) numprocs_previous_run
	286
[146]	287	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
	288	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
	289	ENDIF
[145]	290
	291	READ ( 13 ) variable_chr
	292	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
[257]	293	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
	294	'prior run on PE ', myid
	295	CALL message( 'read_var_list', 'PA0298', 1, 2, 0, 6, 0 )
[145]	296	ENDIF
	297	READ ( 13 ) hor_index_bounds_previous_run
	298
	299	!
[1]	300	!-- Read vertical number of gridpoints and number of different areas used
	301	!-- for computing statistics. Allocate arrays depending on these values,
	302	!-- which are needed for the following read instructions.
	303	READ ( 13 ) variable_chr
	304	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
[257]	305	WRITE( message_string, * ) 'nz not found in data from prior run on PE ',&
	306	myid
	307	CALL message( 'read_var_list', 'PA0299', 1, 2, 0, 6, 0 )
[1]	308	ENDIF
	309	READ ( 13 ) nz
[87]	310
[1]	311	READ ( 13 ) variable_chr
[87]	312	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
[257]	313	WRITE( message_string, * ) 'max_pr_user not found in data from ', &
[87]	314	'prior run on PE ', myid
[257]	315	CALL message( 'read_var_list', 'PA0300', 1, 2, 0, 6, 0 )
[87]	316	ENDIF
[159]	317	READ ( 13 ) max_pr_user ! This value is checked against the number of
	318	! user profiles given for the current run
	319	! in routine user_parin (it has to match)
[87]	320
	321	READ ( 13 ) variable_chr
[1]	322	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
[257]	323	WRITE( message_string, * ) 'statistic_regions not found in data from ', &
[1]	324	'prior run on PE ', myid
[257]	325	CALL message( 'read_var_list', 'PA0301', 1, 2, 0, 6, 0 )
[1]	326	ENDIF
	327	READ ( 13 ) statistic_regions
[146]	328	IF ( .NOT. ALLOCATED( ug ) ) THEN
[1502]	329	ALLOCATE( ug(0:nz+1), u_init(0:nz+1), vg(0:nz+1), &
	330	v_init(0:nz+1), pt_init(0:nz+1), q_init(0:nz+1), &
[1960]	331	ref_state(0:nz+1), s_init(0:nz+1), sa_init(0:nz+1), &
[1502]	332	hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions), &
[146]	333	hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) )
	334	ENDIF
[1]	335
	336	!
	337	!-- Now read all control parameters:
	338	!-- Caution: When the following read instructions have been changed, the
	339	!-- ------- version number stored in the variable binary_version has to be
	340	!-- increased. The same changes must also be done in write_var_list.
	341	READ ( 13 ) variable_chr
	342	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	343
	344	SELECT CASE ( TRIM( variable_chr ) )
	345
	346	CASE ( 'advected_distance_x' )
	347	READ ( 13 ) advected_distance_x
	348	CASE ( 'advected_distance_y' )
	349	READ ( 13 ) advected_distance_y
	350	CASE ( 'alpha_surface' )
	351	READ ( 13 ) alpha_surface
	352	CASE ( 'average_count_pr' )
	353	READ ( 13 ) average_count_pr
	354	CASE ( 'average_count_sp' )
	355	READ ( 13 ) average_count_sp
	356	CASE ( 'average_count_3d' )
	357	READ ( 13 ) average_count_3d
	358	CASE ( 'bc_e_b' )
	359	READ ( 13 ) bc_e_b
	360	CASE ( 'bc_lr' )
	361	READ ( 13 ) bc_lr
	362	CASE ( 'bc_ns' )
	363	READ ( 13 ) bc_ns
	364	CASE ( 'bc_p_b' )
	365	READ ( 13 ) bc_p_b
	366	CASE ( 'bc_p_t' )
	367	READ ( 13 ) bc_p_t
	368	CASE ( 'bc_pt_b' )
	369	READ ( 13 ) bc_pt_b
	370	CASE ( 'bc_pt_t' )
	371	READ ( 13 ) bc_pt_t
	372	CASE ( 'bc_pt_t_val' )
	373	READ ( 13 ) bc_pt_t_val
	374	CASE ( 'bc_q_b' )
	375	READ ( 13 ) bc_q_b
	376	CASE ( 'bc_q_t' )
	377	READ ( 13 ) bc_q_t
	378	CASE ( 'bc_q_t_val' )
	379	READ ( 13 ) bc_q_t_val
	380	CASE ( 'bc_s_b' )
	381	READ ( 13 ) bc_s_b
	382	CASE ( 'bc_s_t' )
	383	READ ( 13 ) bc_s_t
[95]	384	CASE ( 'bc_sa_t' )
	385	READ ( 13 ) bc_sa_t
[1]	386	CASE ( 'bc_uv_b' )
	387	READ ( 13 ) bc_uv_b
	388	CASE ( 'bc_uv_t' )
	389	READ ( 13 ) bc_uv_t
[95]	390	CASE ( 'bottom_salinityflux' )
	391	READ ( 13 ) bottom_salinityflux
[1]	392	CASE ( 'building_height' )
	393	READ ( 13 ) building_height
	394	CASE ( 'building_length_x' )
	395	READ ( 13 ) building_length_x
	396	CASE ( 'building_length_y' )
	397	READ ( 13 ) building_length_y
	398	CASE ( 'building_wall_left' )
	399	READ ( 13 ) building_wall_left
	400	CASE ( 'building_wall_south' )
	401	READ ( 13 ) building_wall_south
[600]	402	CASE ( 'call_psolver_at_all_substeps' )
	403	READ ( 13 ) call_psolver_at_all_substeps
[240]	404	CASE ( 'canyon_height' )
	405	READ ( 13 ) canyon_height
	406	CASE ( 'canyon_width_x' )
	407	READ ( 13 ) canyon_width_x
	408	CASE ( 'canyon_width_y' )
	409	READ ( 13 ) canyon_width_y
	410	CASE ( 'canyon_wall_left' )
	411	READ ( 13 ) canyon_wall_left
	412	CASE ( 'canyon_wall_south' )
	413	READ ( 13 ) canyon_wall_south
[1065]	414	CASE ( 'c_sedimentation' )
	415	READ ( 13 ) c_sedimentation
[600]	416	CASE ( 'cfl_factor' )
	417	READ ( 13 ) cfl_factor
[1]	418	CASE ( 'cloud_droplets' )
	419	READ ( 13 ) cloud_droplets
	420	CASE ( 'cloud_physics' )
	421	READ ( 13 ) cloud_physics
[1053]	422	CASE ( 'cloud_scheme' )
	423	READ ( 13 ) cloud_scheme
[622]	424	CASE ( 'collective_wait' )
	425	READ ( 13 ) collective_wait
[1]	426	CASE ( 'conserve_volume_flow' )
	427	READ ( 13 ) conserve_volume_flow
[241]	428	CASE ( 'conserve_volume_flow_mode' )
	429	READ ( 13 ) conserve_volume_flow_mode
[1691]	430	CASE ( 'constant_flux_layer' )
	431	READ ( 13 ) constant_flux_layer
[291]	432	CASE ( 'coupling_start_time' )
	433	READ ( 13 ) coupling_start_time
[1]	434	CASE ( 'current_timestep_number' )
	435	READ ( 13 ) current_timestep_number
[824]	436	CASE ( 'curvature_solution_effects' )
	437	READ ( 13 ) curvature_solution_effects
[600]	438	CASE ( 'cycle_mg' )
	439	READ ( 13 ) cycle_mg
[1]	440	CASE ( 'damp_level_1d' )
	441	READ ( 13 ) damp_level_1d
	442	CASE ( 'dissipation_1d' )
	443	READ ( 13 ) dissipation_1d
[1308]	444	CASE ( 'do2d_xy_time_count' )
	445	READ ( 13 ) do2d_xy_time_count
	446	CASE ( 'do2d_xz_time_count' )
	447	READ ( 13 ) do2d_xz_time_count
	448	CASE ( 'do2d_yz_time_count' )
	449	READ ( 13 ) do2d_yz_time_count
	450	CASE ( 'do3d_time_count' )
	451	READ ( 13 ) do3d_time_count
[240]	452	CASE ( 'dp_external' )
	453	READ ( 13 ) dp_external
	454	CASE ( 'dp_level_b' )
	455	READ ( 13 ) dp_level_b
	456	CASE ( 'dp_smooth' )
	457	READ ( 13 ) dp_smooth
	458	CASE ( 'dpdxy' )
	459	READ ( 13 ) dpdxy
[1831]	460	CASE ( 'cloud_water_sedimentation' )
	461	READ ( 13 ) cloud_water_sedimentation
[1]	462	CASE ( 'dt_pr_1d' )
	463	READ ( 13 ) dt_pr_1d
	464	CASE ( 'dt_run_control_1d' )
	465	READ ( 13 ) dt_run_control_1d
	466	CASE ( 'dt_3d' )
	467	READ ( 13 ) dt_3d
	468	CASE ( 'dvrp_filecount' )
	469	READ ( 13 ) dvrp_filecount
	470	CASE ( 'dx' )
	471	READ ( 13 ) dx
	472	CASE ( 'dy' )
	473	READ ( 13 ) dy
	474	CASE ( 'dz' )
	475	READ ( 13 ) dz
	476	CASE ( 'dz_max' )
	477	READ ( 13 ) dz_max
	478	CASE ( 'dz_stretch_factor' )
	479	READ ( 13 ) dz_stretch_factor
	480	CASE ( 'dz_stretch_level' )
	481	READ ( 13 ) dz_stretch_level
	482	CASE ( 'e_min' )
	483	READ ( 13 ) e_min
	484	CASE ( 'end_time_1d' )
	485	READ ( 13 ) end_time_1d
	486	CASE ( 'fft_method' )
	487	READ ( 13 ) fft_method
[849]	488	CASE ( 'first_call_lpm' )
	489	READ ( 13 ) first_call_lpm
[1]	490	CASE ( 'galilei_transformation' )
	491	READ ( 13 ) galilei_transformation
	492	CASE ( 'hom' )
	493	READ ( 13 ) hom
[143]	494	CASE ( 'hom_sum' )
	495	READ ( 13 ) hom_sum
[151]	496	CASE ( 'humidity' )
	497	READ ( 13 ) humidity
	498	CASE ( 'inflow_damping_factor' )
	499	IF ( .NOT. ALLOCATED( inflow_damping_factor ) ) THEN
	500	ALLOCATE( inflow_damping_factor(0:nz+1) )
	501	ENDIF
	502	READ ( 13 ) inflow_damping_factor
	503	CASE ( 'inflow_damping_height' )
	504	READ ( 13 ) inflow_damping_height
	505	CASE ( 'inflow_damping_width' )
	506	READ ( 13 ) inflow_damping_width
[1]	507	CASE ( 'inflow_disturbance_begin' )
	508	READ ( 13 ) inflow_disturbance_begin
	509	CASE ( 'inflow_disturbance_end' )
	510	READ ( 13 ) inflow_disturbance_end
	511	CASE ( 'km_constant' )
	512	READ ( 13 ) km_constant
[1241]	513	CASE ( 'large_scale_forcing' )
	514	READ ( 13 ) large_scale_forcing
[2320]	515	CASE ( 'large_scale_subsidence' )
[411]	516	READ ( 13 ) large_scale_subsidence
[1065]	517	CASE ( 'limiter_sedimentation' )
	518	READ ( 13 ) limiter_sedimentation
[63]	519	CASE ( 'loop_optimization' )
	520	READ ( 13 ) loop_optimization
[927]	521	CASE ( 'masking_method' )
	522	READ ( 13 ) masking_method
[151]	523	CASE ( 'mean_inflow_profiles' )
	524	IF ( .NOT. ALLOCATED( mean_inflow_profiles ) ) THEN
[1960]	525	ALLOCATE( mean_inflow_profiles(0:nz+1,7) )
[151]	526	ENDIF
	527	READ ( 13 ) mean_inflow_profiles
[600]	528	CASE ( 'mg_cycles' )
	529	READ ( 13 ) mg_cycles
	530	CASE ( 'mg_switch_to_pe0_level' )
	531	READ ( 13 ) mg_switch_to_pe0_level
[1]	532	CASE ( 'mixing_length_1d' )
	533	READ ( 13 ) mixing_length_1d
	534	CASE ( 'momentum_advec' )
	535	READ ( 13 ) momentum_advec
[1691]	536	CASE ( 'most_method' )
	537	READ ( 13 ) most_method
[1115]	538	CASE ( 'nc_const' )
	539	READ ( 13 ) nc_const
[1]	540	CASE ( 'netcdf_precision' )
	541	READ ( 13 ) netcdf_precision
[940]	542	CASE ( 'neutral' )
	543	READ ( 13 ) neutral
[600]	544	CASE ( 'ngsrb' )
	545	READ ( 13 ) ngsrb
	546	CASE ( 'nsor' )
	547	READ ( 13 ) nsor
[1]	548	CASE ( 'nsor_ini' )
	549	READ ( 13 ) nsor_ini
[1241]	550	CASE ( 'nudging' )
	551	READ ( 13 ) nudging
[1957]	552	CASE ( 'num_leg' )
	553	READ ( 13 ) num_leg
[1]	554	CASE ( 'nx' )
	555	READ ( 13 ) nx
[147]	556	nx_on_file = nx
[1]	557	CASE ( 'ny' )
	558	READ ( 13 ) ny
[147]	559	ny_on_file = ny
[94]	560	CASE ( 'ocean' )
	561	READ ( 13 ) ocean
[1]	562	CASE ( 'old_dt' )
	563	READ ( 13 ) old_dt
	564	CASE ( 'omega' )
	565	READ ( 13 ) omega
[600]	566	CASE ( 'omega_sor' )
	567	READ ( 13 ) omega_sor
[345]	568	CASE ( 'output_for_t0' )
	569	READ (13) output_for_t0
[1]	570	CASE ( 'passive_scalar' )
	571	READ ( 13 ) passive_scalar
	572	CASE ( 'phi' )
	573	READ ( 13 ) phi
[600]	574	CASE ( 'prandtl_number' )
	575	READ ( 13 ) prandtl_number
[1]	576	CASE ( 'precipitation' )
	577	READ ( 13 ) precipitation
[600]	578	CASE ( 'psolver' )
	579	READ ( 13 ) psolver
[978]	580	CASE ( 'pt_damping_factor' )
	581	READ ( 13 ) pt_damping_factor
	582	CASE ( 'pt_damping_width' )
	583	READ ( 13 ) pt_damping_width
[1]	584	CASE ( 'pt_init' )
	585	READ ( 13 ) pt_init
[57]	586	CASE ( 'pt_reference' )
	587	READ ( 13 ) pt_reference
[1]	588	CASE ( 'pt_surface' )
	589	READ ( 13 ) pt_surface
	590	CASE ( 'pt_surface_initial_change' )
	591	READ ( 13 ) pt_surface_initial_change
	592	CASE ( 'pt_vertical_gradient' )
	593	READ ( 13 ) pt_vertical_gradient
	594	CASE ( 'pt_vertical_gradient_level' )
	595	READ ( 13 ) pt_vertical_gradient_level
	596	CASE ( 'pt_vertical_gradient_level_ind' )
	597	READ ( 13 ) pt_vertical_gradient_level_ind
	598	CASE ( 'q_init' )
	599	READ ( 13 ) q_init
	600	CASE ( 'q_surface' )
	601	READ ( 13 ) q_surface
	602	CASE ( 'q_surface_initial_change' )
	603	READ ( 13 ) q_surface_initial_change
	604	CASE ( 'q_vertical_gradient' )
	605	READ ( 13 ) q_vertical_gradient
	606	CASE ( 'q_vertical_gradient_level' )
	607	READ ( 13 ) q_vertical_gradient_level
	608	CASE ( 'q_vertical_gradient_level_ind' )
	609	READ ( 13 ) q_vertical_gradient_level_ind
[1496]	610	CASE ( 'cloud_top_radiation' )
	611	READ ( 13 ) cloud_top_radiation
[1]	612	CASE ( 'random_generator' )
	613	READ ( 13 ) random_generator
	614	CASE ( 'random_heatflux' )
	615	READ ( 13 ) random_heatflux
[600]	616	CASE ( 'rayleigh_damping_factor' )
	617	READ ( 13 ) rayleigh_damping_factor
	618	CASE ( 'rayleigh_damping_height' )
	619	READ ( 13 ) rayleigh_damping_height
[151]	620	CASE ( 'recycling_width' )
	621	READ ( 13 ) recycling_width
[1560]	622	CASE ( 'recycling_yshift' )
	623	READ ( 13 ) recycling_yshift
[1179]	624	CASE ( 'reference_state' )
	625	READ ( 13 ) reference_state
	626	CASE ( 'ref_state' )
	627	READ ( 13 ) ref_state
[600]	628	CASE ( 'residual_limit' )
	629	READ ( 13 ) residual_limit
[1]	630	CASE ( 'roughness_length' )
	631	READ ( 13 ) roughness_length
	632	CASE ( 'runnr' )
	633	READ ( 13 ) runnr
[291]	634	CASE ( 'run_coupled' )
	635	READ ( 13 ) run_coupled
[1960]	636	CASE ( 's_init' )
	637	READ ( 13 ) s_init
	638	CASE ( 's_surface' )
	639	READ ( 13 ) s_surface
	640	CASE ( 's_surface_initial_change' )
	641	READ ( 13 ) s_surface_initial_change
	642	CASE ( 's_vertical_gradient' )
	643	READ ( 13 ) s_vertical_gradient
	644	CASE ( 's_vertical_gradient_level' )
	645	READ ( 13 ) s_vertical_gradient_level
	646	CASE ( 's_vertical_gradient_level_ind' )
[2259]	647	READ ( 13 ) s_vertical_gradient_level_ind
[94]	648	CASE ( 'sa_init' )
	649	READ ( 13 ) sa_init
	650	CASE ( 'sa_surface' )
	651	READ ( 13 ) sa_surface
	652	CASE ( 'sa_vertical_gradient' )
	653	READ ( 13 ) sa_vertical_gradient
	654	CASE ( 'sa_vertical_gradient_level' )
	655	READ ( 13 ) sa_vertical_gradient_level
[1]	656	CASE ( 'scalar_advec' )
	657	READ ( 13 ) scalar_advec
	658	CASE ( 'simulated_time' )
	659	READ ( 13 ) simulated_time
	660	CASE ( 'surface_heatflux' )
	661	READ ( 13 ) surface_heatflux
	662	CASE ( 'surface_pressure' )
	663	READ ( 13 ) surface_pressure
	664	CASE ( 'surface_scalarflux' )
[2259]	665	READ ( 13 ) surface_scalarflux
[1]	666	CASE ( 'surface_waterflux' )
[2259]	667	READ ( 13 ) surface_waterflux
[102]	668	CASE ( 'time_coupling' )
	669	READ ( 13 ) time_coupling
[1]	670	CASE ( 'time_disturb' )
	671	READ ( 13 ) time_disturb
[1502]	672	CASE ( 'time_dopr' )
[1]	673	READ ( 13 ) time_dopr
[587]	674	CASE ( 'time_domask' )
	675	READ ( 13 ) time_domask
[1]	676	CASE ( 'time_dopr_av' )
	677	READ ( 13 ) time_dopr_av
	678	CASE ( 'time_dopr_listing' )
	679	READ ( 13 ) time_dopr_listing
	680	CASE ( 'time_dopts' )
	681	READ ( 13 ) time_dopts
	682	CASE ( 'time_dosp' )
	683	READ ( 13 ) time_dosp
	684	CASE ( 'time_dots' )
	685	READ ( 13 ) time_dots
	686	CASE ( 'time_do2d_xy' )
	687	READ ( 13 ) time_do2d_xy
	688	CASE ( 'time_do2d_xz' )
	689	READ ( 13 ) time_do2d_xz
	690	CASE ( 'time_do2d_yz' )
	691	READ ( 13 ) time_do2d_yz
	692	CASE ( 'time_do3d' )
	693	READ ( 13 ) time_do3d
	694	CASE ( 'time_do_av' )
	695	READ ( 13 ) time_do_av
	696	CASE ( 'time_do_sla' )
	697	READ ( 13 ) time_do_sla
	698	CASE ( 'time_dvrp' )
	699	READ ( 13 ) time_dvrp
[1585]	700	CASE ( 'time_radiation' )
	701	READ ( 13 ) time_radiation
[1]	702	CASE ( 'time_restart' )
	703	READ ( 13 ) time_restart
	704	CASE ( 'time_run_control' )
	705	READ ( 13 ) time_run_control
[291]	706	CASE ( 'time_since_reference_point' )
	707	READ ( 13 ) time_since_reference_point
[1]	708	CASE ( 'timestep_scheme' )
	709	READ ( 13 ) timestep_scheme
	710	CASE ( 'topography' )
	711	READ ( 13 ) topography
[256]	712	CASE ( 'topography_grid_convention' )
	713	READ ( 13 ) topography_grid_convention
[19]	714	CASE ( 'top_heatflux' )
	715	READ ( 13 ) top_heatflux
[102]	716	CASE ( 'top_momentumflux_u' )
	717	READ ( 13 ) top_momentumflux_u
	718	CASE ( 'top_momentumflux_v' )
	719	READ ( 13 ) top_momentumflux_v
[94]	720	CASE ( 'top_salinityflux' )
	721	READ ( 13 ) top_salinityflux
[1992]	722	CASE ( 'top_scalarflux' )
	723	READ ( 13 ) top_scalarflux
[1]	724	CASE ( 'tsc' )
	725	READ ( 13 ) tsc
[1831]	726	CASE ( 'collision_turbulence' )
	727	READ ( 13 ) collision_turbulence
[2232]	728	CASE ( 'tunnel_height' )
	729	READ ( 13 ) tunnel_height
	730	CASE ( 'tunnel_length' )
	731	READ ( 13 ) tunnel_length
	732	CASE ( 'tunnel_width_x' )
	733	READ ( 13 ) tunnel_width_x
	734	CASE ( 'tunnel_width_y' )
	735	READ ( 13 ) tunnel_width_y
	736	CASE ( 'tunnel_wall_depth' )
	737	READ ( 13 ) tunnel_wall_depth
[151]	738	CASE ( 'turbulent_inflow' )
	739	READ ( 13 ) turbulent_inflow
[241]	740	CASE ( 'u_bulk' )
	741	READ ( 13 ) u_bulk
[1]	742	CASE ( 'u_init' )
	743	READ ( 13 ) u_init
	744	CASE ( 'u_max' )
	745	READ ( 13 ) u_max
	746	CASE ( 'u_max_ijk' )
	747	READ ( 13 ) u_max_ijk
	748	CASE ( 'ug' )
	749	READ ( 13 ) ug
	750	CASE ( 'ug_surface' )
	751	READ ( 13 ) ug_surface
	752	CASE ( 'ug_vertical_gradient' )
	753	READ ( 13 ) ug_vertical_gradient
	754	CASE ( 'ug_vertical_gradient_level' )
	755	READ ( 13 ) ug_vertical_gradient_level
	756	CASE ( 'ug_vertical_gradient_level_ind' )
	757	READ ( 13 ) ug_vertical_gradient_level_ind
	758	CASE ( 'use_surface_fluxes' )
	759	READ ( 13 ) use_surface_fluxes
[20]	760	CASE ( 'use_top_fluxes' )
	761	READ ( 13 ) use_top_fluxes
[1]	762	CASE ( 'use_ug_for_galilei_tr' )
	763	READ ( 13 ) use_ug_for_galilei_tr
	764	CASE ( 'use_upstream_for_tke' )
	765	READ ( 13 ) use_upstream_for_tke
[241]	766	CASE ( 'v_bulk' )
	767	READ ( 13 ) v_bulk
[1]	768	CASE ( 'v_init' )
	769	READ ( 13 ) v_init
	770	CASE ( 'v_max' )
	771	READ ( 13 ) v_max
	772	CASE ( 'v_max_ijk' )
	773	READ ( 13 ) v_max_ijk
[1053]	774	CASE ( 'ventilation_effect' )
	775	READ ( 13 ) ventilation_effect
[1]	776	CASE ( 'vg' )
	777	READ ( 13 ) vg
	778	CASE ( 'vg_surface' )
	779	READ ( 13 ) vg_surface
	780	CASE ( 'vg_vertical_gradient' )
	781	READ ( 13 ) vg_vertical_gradient
	782	CASE ( 'vg_vertical_gradient_level' )
	783	READ ( 13 ) vg_vertical_gradient_level
	784	CASE ( 'vg_vertical_gradient_level_ind' )
	785	READ ( 13 ) vg_vertical_gradient_level_ind
[1957]	786	CASE ( 'virtual_flight' )
[2259]	787	READ ( 13 ) virtual_flight
[143]	788	CASE ( 'volume_flow_area' )
	789	READ ( 13 ) volume_flow_area
	790	CASE ( 'volume_flow_initial' )
	791	READ ( 13 ) volume_flow_initial
[1]	792	CASE ( 'wall_adjustment' )
	793	READ ( 13 ) wall_adjustment
[580]	794	CASE ( 'subs_vertical_gradient' )
	795	READ ( 13 ) subs_vertical_gradient
	796	CASE ( 'subs_vertical_gradient_level' )
	797	READ ( 13 ) subs_vertical_gradient_level
	798	CASE ( 'subs_vertical_gradient_level_i' )
	799	READ ( 13 ) subs_vertical_gradient_level_i
[2042]	800	CASE ( 'wall_heatflux' )
	801	READ ( 13 ) wall_heatflux
[2232]	802	CASE ( 'wall_humidityflux' )
	803	READ ( 13 ) wall_humidityflux
	804	CASE ( 'wall_scalarflux' )
	805	READ ( 13 ) wall_scalarflux
	806	CASE ( 'wall_salinityflux' )
	807	READ ( 13 ) wall_salinityflux
[1]	808	CASE ( 'w_max' )
	809	READ ( 13 ) w_max
	810	CASE ( 'w_max_ijk' )
	811	READ ( 13 ) w_max_ijk
[1691]	812	CASE ( 'zeta_max' )
	813	READ ( 13 ) zeta_max
	814	CASE ( 'zeta_min' )
	815	READ ( 13 ) zeta_min
[978]	816	CASE ( 'z0h_factor' )
	817	READ ( 13 ) z0h_factor
[1]	818
	819	CASE DEFAULT
[257]	820	WRITE( message_string, * ) 'unknown variable named "', &
	821	TRIM( variable_chr ), '" found in', &
[2259]	822	' data from prior run on PE ', myid
[257]	823	CALL message( 'read_var_list', 'PA0302', 1, 2, 0, 6, 0 )
[1]	824	END SELECT
	825	!
	826	!-- Read next string
	827	READ ( 13 ) variable_chr
	828
	829	ENDDO
[2259]	830
[1957]	831	IF ( virtual_flight ) CALL flight_read_restart_data
[1]	832
[2259]	833	IF ( synthetic_turbulence_generator ) CALL stg_read_restart_data
[1]	834
[146]	835	END SUBROUTINE read_var_list
[143]	836
[146]	837
	838
[147]	839	!------------------------------------------------------------------------------!
	840	! Description:
	841	! ------------
[1682]	842	!> Skipping the global control variables from restart-file (binary format)
	843	!> except some information needed when reading restart data from a previous
	844	!> run which used a smaller total domain or/and a different domain decomposition.
[147]	845	!------------------------------------------------------------------------------!
[2259]	846
[1682]	847	SUBROUTINE read_parts_of_var_list
[147]	848
[1682]	849
[1320]	850	USE arrays_3d, &
[1960]	851	ONLY: inflow_damping_factor, mean_inflow_profiles, ref_state, ug, vg
[1320]	852
[147]	853	USE control_parameters
[1320]	854
	855	USE indices, &
	856	ONLY: nz, nx, nx_on_file, ny, ny_on_file
	857
	858	USE kinds
	859
[147]	860	USE pegrid
	861
[1320]	862	USE statistics, &
	863	ONLY: statistic_regions, hom, hom_sum, pr_palm, u_max, u_max_ijk, &
	864	v_max, v_max_ijk, w_max, w_max_ijk
	865
[147]	866	IMPLICIT NONE
	867
	868	CHARACTER (LEN=10) :: version_on_file
[1521]	869	CHARACTER (LEN=20) :: momentum_advec_check
	870	CHARACTER (LEN=20) :: scalar_advec_check
[147]	871	CHARACTER (LEN=30) :: variable_chr
[626]	872	CHARACTER (LEN=1) :: cdum
[147]	873
[1320]	874	INTEGER(iwp) :: max_pr_user_on_file
	875	INTEGER(iwp) :: nz_on_file
	876	INTEGER(iwp) :: statistic_regions_on_file
	877	INTEGER(iwp) :: tmp_mpru
	878	INTEGER(iwp) :: tmp_sr
[147]	879
[1320]	880	REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: hom_sum_on_file
	881	REAL(wp), DIMENSION(:,:,:,:), ALLOCATABLE :: hom_on_file
[147]	882
	883
	884	CALL check_open( 13 )
	885
	886	READ ( 13 ) version_on_file
	887
[2232]	888
[147]	889	!
	890	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
	891	!-- run
	892	READ ( 13 ) variable_chr
	893	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
[274]	894	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
	895	'run on PE ', myid
[257]	896	CALL message( 'read_parts_of_var_list', 'PA0297', 1, 2, 0, 6, 0 )
[147]	897	ENDIF
	898	READ ( 13 ) numprocs_previous_run
	899
	900	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
	901	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
	902	ENDIF
	903
	904	READ ( 13 ) variable_chr
	905	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
[257]	906	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
	907	'prior run on PE ', myid
	908	CALL message( 'read_parts_of_var_list', 'PA0298', 1, 2, 0, 6, 0 )
[147]	909	ENDIF
	910	READ ( 13 ) hor_index_bounds_previous_run
	911
	912	!
	913	!-- Read vertical number of gridpoints and number of different areas used
	914	!-- for computing statistics. Allocate arrays depending on these values,
	915	!-- which are needed for the following read instructions.
	916	READ ( 13 ) variable_chr
	917	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
[257]	918	message_string = 'nz not found in restart data file'
	919	CALL message( 'read_parts_of_var_list', 'PA0303', 1, 2, 0, 6, 0 )
[147]	920	ENDIF
	921	READ ( 13 ) nz_on_file
	922	IF ( nz_on_file /= nz ) THEN
[257]	923	WRITE( message_string, * ) 'mismatch concerning number of ', &
[274]	924	'gridpoints along z', &
	925	'&nz on file = "', nz_on_file, '"', &
	926	'&nz from run = "', nz, '"'
[257]	927	CALL message( 'read_parts_of_var_list', 'PA0304', 1, 2, 0, 6, 0 )
[147]	928	ENDIF
	929
	930	READ ( 13 ) variable_chr
	931	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
[257]	932	message_string = 'max_pr_user not found in restart data file'
	933	CALL message( 'read_parts_of_var_list', 'PA0305', 1, 2, 0, 6, 0 )
[147]	934	ENDIF
	935	READ ( 13 ) max_pr_user_on_file
[170]	936	IF ( max_pr_user_on_file /= max_pr_user ) THEN
[274]	937	WRITE( message_string, * ) 'number of user profiles on res', &
	938	'tart data file differs from the current ', &
	939	'run&max_pr_user on file = "', &
	940	max_pr_user_on_file, '"', &
	941	'&max_pr_user from run = "', &
[257]	942	max_pr_user, '"'
	943	CALL message( 'read_parts_of_var_list', 'PA0306', 0, 0, 0, 6, 0 )
[170]	944	tmp_mpru = MIN( max_pr_user_on_file, max_pr_user )
	945	ELSE
	946	tmp_mpru = max_pr_user
[147]	947	ENDIF
	948
	949	READ ( 13 ) variable_chr
	950	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
[257]	951	message_string = 'statistic_regions not found in restart data file'
	952	CALL message( 'read_parts_of_var_list', 'PA0307', 1, 2, 0, 6, 0 )
[147]	953	ENDIF
	954	READ ( 13 ) statistic_regions_on_file
[173]	955	IF ( statistic_regions_on_file /= statistic_regions ) THEN
[2259]	956	WRITE( message_string, * ) 'statistic regions on restart data file ',&
[274]	957	'differ from the current run', &
	958	'&statistic regions on file = "', &
	959	statistic_regions_on_file, '"', &
	960	'&statistic regions from run = "', &
	961	statistic_regions, '"', &
[257]	962	'&statistic data may be lost!'
	963	CALL message( 'read_parts_of_var_list', 'PA0308', 0, 1, 0, 6, 0 )
[170]	964	tmp_sr = MIN( statistic_regions_on_file, statistic_regions )
	965	ELSE
	966	tmp_sr = statistic_regions
[147]	967	ENDIF
	968
	969	!
	970	!-- Now read and check some control parameters and skip the rest
	971	READ ( 13 ) variable_chr
	972
	973	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	974
	975	SELECT CASE ( TRIM( variable_chr ) )
	976
[151]	977	CASE ( 'average_count_pr' )
	978	READ ( 13 ) average_count_pr
[257]	979	IF ( average_count_pr /= 0 ) THEN
[274]	980	WRITE( message_string, * ) 'inflow profiles not temporally ', &
	981	'averaged. &Averaging will be done now using ', &
	982	average_count_pr, ' samples.'
	983	CALL message( 'read_parts_of_var_list', 'PA0309', &
	984	0, 1, 0, 6, 0 )
[151]	985	ENDIF
	986
[147]	987	CASE ( 'hom' )
	988	ALLOCATE( hom_on_file(0:nz+1,2,pr_palm+max_pr_user_on_file, &
	989	0:statistic_regions_on_file) )
	990	READ ( 13 ) hom_on_file
[170]	991	hom(:,:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
	992	hom_on_file(:,:,1:pr_palm+tmp_mpru,0:tmp_sr)
[147]	993	DEALLOCATE( hom_on_file )
	994
[151]	995	CASE ( 'hom_sum' )
	996	ALLOCATE( hom_sum_on_file(0:nz+1,pr_palm+max_pr_user_on_file, &
	997	0:statistic_regions_on_file) )
	998	READ ( 13 ) hom_sum_on_file
[170]	999	hom_sum(:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
	1000	hom_sum_on_file(:,1:pr_palm+tmp_mpru,0:tmp_sr)
[151]	1001	DEALLOCATE( hom_sum_on_file )
	1002
[1521]	1003	CASE ( 'momentum_advec' )
	1004	momentum_advec_check = momentum_advec
	1005	READ ( 13 ) momentum_advec
	1006	IF ( TRIM( momentum_advec_check ) /= TRIM( momentum_advec ) ) THEN
[1524]	1007	WRITE( message_string, * ) 'momentum_advec of the restart run ',&
[1521]	1008	'differs from momentum_advec of the initial run.'
	1009	CALL message( 'read_parts_of_var_list', 'PA0100', &
	1010	1, 2, 0, 6, 0 )
[2259]	1011	END IF
	1012
[147]	1013	CASE ( 'nx' )
	1014	READ ( 13 ) nx_on_file
	1015
	1016	CASE ( 'ny' )
	1017	READ ( 13 ) ny_on_file
	1018
[1253]	1019	CASE ( 'ref_state' )
	1020	READ ( 13 ) ref_state
[147]	1021
[1521]	1022	CASE ( 'scalar_advec' )
	1023	scalar_advec_check = scalar_advec
	1024	READ ( 13 ) scalar_advec
	1025	IF ( TRIM( scalar_advec_check ) /= TRIM( scalar_advec ) ) THEN
[1524]	1026	WRITE( message_string, * ) 'scalar_advec of the restart run ', &
[1521]	1027	'differs from scalar_advec of the initial run.'
	1028	CALL message( 'read_parts_of_var_list', 'PA0101', &
	1029	1, 2, 0, 6, 0 )
[2259]	1030	END IF
	1031
[147]	1032	CASE DEFAULT
	1033
[626]	1034	READ ( 13 ) cdum
[147]	1035
	1036	END SELECT
	1037
	1038	READ ( 13 ) variable_chr
	1039
	1040	ENDDO
	1041
[151]	1042	!
	1043	!-- Calculate the temporal average of vertical profiles, if neccessary
	1044	IF ( average_count_pr /= 0 ) THEN
[1322]	1045	hom_sum = hom_sum / REAL( average_count_pr, KIND=wp )
[151]	1046	ENDIF
[147]	1047
[151]	1048
[147]	1049	END SUBROUTINE read_parts_of_var_list
	1050
	1051
	1052
[146]	1053	!------------------------------------------------------------------------------!
	1054	! Description:
	1055	! ------------
[1682]	1056	!> Skipping the global control variables from restart-file (binary format)
[146]	1057	!------------------------------------------------------------------------------!
[2259]	1058
[1682]	1059	SUBROUTINE skip_var_list
[146]	1060
[1957]	1061	USE control_parameters, &
	1062	ONLY: virtual_flight
[2259]	1063
[1957]	1064	USE flight_mod, &
	1065	ONLY: flight_skip_var_list
[2259]	1066
[147]	1067	IMPLICIT NONE
	1068
[146]	1069	CHARACTER (LEN=10) :: version_on_file
	1070	CHARACTER (LEN=30) :: variable_chr
	1071
[600]	1072	CHARACTER (LEN=1) :: cdum
[146]	1073
	1074
	1075	READ ( 13 ) version_on_file
	1076
	1077	READ ( 13 ) variable_chr
	1078
	1079	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	1080
[600]	1081	READ ( 13 ) cdum
[146]	1082	READ ( 13 ) variable_chr
	1083
	1084	ENDDO
[1957]	1085	!
[2259]	1086	!-- In case of virtual flights, skip also variables related to
[1957]	1087	!-- this module.
	1088	IF ( virtual_flight ) CALL flight_skip_var_list
[146]	1089
[2259]	1090
[146]	1091	END SUBROUTINE skip_var_list

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |