Home

Context Navigation

source: palm/trunk/SOURCE/read_var_list.f90 @ 2320

Last change on this file since 2320 was 2320, checked in by suehring, 7 years ago
large-scale forcing and nudging modularized
Property svn:keywords set to `Id`
File size: 39.4 KB

Rev	Line
[1682]	1	!> @file read_var_list.f90
[2000]	2	!------------------------------------------------------------------------------!
[1036]	3	! This file is part of PALM.
	4	!
[2000]	5	! PALM is free software: you can redistribute it and/or modify it under the
	6	! terms of the GNU General Public License as published by the Free Software
	7	! Foundation, either version 3 of the License, or (at your option) any later
	8	! version.
[1036]	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
[2101]	17	! Copyright 1997-2017 Leibniz Universitaet Hannover
[2000]	18	!------------------------------------------------------------------------------!
[1036]	19	!
[257]	20	! Current revisions:
[622]	21	! ------------------
[2233]	22	!
	23	!
	24	! Former revisions:
	25	! -----------------
	26	! $Id: read_var_list.f90 2320 2017-07-21 12:47:43Z suehring $
[2320]	27	! Formatting adjustment
	28	!
	29	! 2265 2017-06-08 16:58:28Z schwenkel
[2265]	30	! Unused variables removed.
	31	!
	32	! 2259 2017-06-08 09:09:11Z gronemeier
[2259]	33	! Implemented synthetic turbulence generator
[2233]	34	!
[2259]	35	! 2233 2017-05-30 18:08:54Z suehring
	36	!
[2233]	37	! 2232 2017-05-30 17:47:52Z suehring
[2232]	38	! Replace wall_qflux, wall_sflux by wall_humidityflux and wall_scalarflux; add
	39	! wall_salinityflux
[2259]	40	! +tunnel_height, tunnel_length, tunnel_width_x, tunnel_width_y,
[2232]	41	! tunnel_wall_depth
	42	!
[2043]	43	! 2042 2016-11-02 13:47:31Z suehring
	44	! Bugfix, read restart data for wall_heatflux, wall_qflux and wall_sflux
[2259]	45	!
[2001]	46	! 2000 2016-08-20 18:09:15Z knoop
	47	! Forced header and separation lines into 80 columns
[2259]	48	!
[1993]	49	! 1992 2016-08-12 15:14:59Z suehring
	50	! top_scalarflux added
[2259]	51	!
[1961]	52	! 1960 2016-07-12 16:34:24Z suehring
	53	! Separate humidity and passive scalar
	54	! Remove unused variables from ONLY list
	55	!
[1958]	56	! 1957 2016-07-07 10:43:48Z suehring
	57	! flight module added
	58	!
[1851]	59	! 1849 2016-04-08 11:33:18Z hoffmann
	60	! Adapted for modularization of microphysics
	61	!
[1834]	62	! 1833 2016-04-07 14:23:03Z raasch
	63	! spectra_mod added
	64	!
[1832]	65	! 1831 2016-04-07 13:15:51Z hoffmann
	66	! turbulence renamed collision_turbulence, drizzle renamed
	67	! cloud_water_sedimentation
	68	!
[1809]	69	! 1808 2016-04-05 19:44:00Z raasch
	70	! test output removed
	71	!
[1784]	72	! 1783 2016-03-06 18:36:17Z raasch
	73	! netcdf module name changed + related changes
	74	!
[1700]	75	! 1699 2015-10-29 08:02:35Z maronga
	76	! Bugfix: update of binary version from 3.9b to 4.0 was missing
[2259]	77	!
[1692]	78	! 1691 2015-10-26 16:17:44Z maronga
[2259]	79	! Added output of most_method, constant_flux_layer, zeta_min, zeta_max. Removed
[1692]	80	! output of prandtl_layer and rif_min, rif_max.
[2259]	81	!
[1683]	82	! 1682 2015-10-07 23:56:08Z knoop
	83	! Code annotations made doxygen readable
[2259]	84	!
[1616]	85	! 1615 2015-07-08 18:49:19Z suehring
	86	! Enable turbulent inflow for passive_scalar and humidity
	87	!
[1586]	88	! 1585 2015-04-30 07:05:52Z maronga
	89	! Adapted for RRTMG
[2259]	90	!
[1561]	91	! 1560 2015-03-06 10:48:54Z keck
	92	! +recycling_yshift
[2259]	93	!
[1523]	94	! 1522 2015-01-14 10:53:12Z keck
	95	! added query for checking if the advection scheme in the restart run is the
	96	! same as the advection scheme in the corresponding initial run
[2259]	97	!
[1503]	98	! 1502 2014-12-03 18:22:31Z kanani
[2259]	99	! Canopy module and parameters removed (parameters are always read from
[1503]	100	! canopy_par NAMELIST for initial and restart runs)
[2259]	101	!
[1497]	102	! 1496 2014-12-02 17:25:50Z maronga
	103	! Renamed "radiation" -> "cloud_top_radiation"
[2259]	104	!
[1485]	105	! 1484 2014-10-21 10:53:05Z kanani
[1484]	106	! Changes in the course of the canopy-model modularization:
	107	! parameters alpha_lad, beta_lad, lai_beta added,
	108	! module plant_canopy_model_mod added,
	109	! drag_coefficient, leaf_surface_concentration and scalar_exchange_coefficient
	110	! renamed to canopy_drag_coeff, leaf_surface_conc and leaf_scalar_exch_coeff
[1321]	111	!
[1323]	112	! 1322 2014-03-20 16:38:49Z raasch
	113	! REAL functions provided with KIND-attribute
	114	!
[1321]	115	! 1320 2014-03-20 08:40:49Z raasch
[1320]	116	! ONLY-attribute added to USE-statements,
	117	! kind-parameters added to all INTEGER and REAL declaration statements,
	118	! kinds are defined in new module kinds,
	119	! old module precision_kind is removed,
	120	! revision history before 2012 removed,
	121	! comment fields (!:) to be used for variable explanations added to
	122	! all variable declaration statements
[1054]	123	!
[1309]	124	! 1308 2014-03-13 14:58:42Z fricke
	125	! +do2d_xy_time_count, do2d_xz_time_count, do2d_yz_time_count,
	126	! +do3d_time_count
	127	!
[1254]	128	! 1253 2013-11-07 10:48:12Z fricke
[2259]	129	! Bugfix: add ref_state to read_parts_of_var_list, otherwise ref_state
[1254]	130	! is zero for initializing_actions = 'cyclic_fill'
	131	!
[1242]	132	! 1241 2013-10-30 11:36:58Z heinze
	133	! +nudging
	134	! +large_scale_forcing
	135	!
[1196]	136	! 1195 2013-07-01 12:27:57Z heinze
	137	! Bugfix: allocate ref_state
	138	!
[1182]	139	! 1179 2013-06-14 05:57:58Z raasch
	140	! +ref_state
	141	!
[1116]	142	! 1115 2013-03-26 18:16:16Z hoffmann
	143	! unused variables removed
	144	!
[1093]	145	! 1092 2013-02-02 11:24:22Z raasch
	146	! unused variables removed
	147	!
[1066]	148	! 1065 2012-11-22 17:42:36Z hoffmann
	149	! +nc, c_sedimentation, limiter_sedimentation, turbulence
	150	! -mu_constant, mu_constant_value
	151	!
[1054]	152	! 1053 2012-11-13 17:11:03Z hoffmann
[2259]	153	! necessary expansions according to the two new prognostic equations (nr, qr)
[1053]	154	! of the two-moment cloud physics scheme:
	155	! +bc__b, +bc__t, +bc__t_val, _init, _surface, _surface_initial_change,
	156	! +_vertical_gradient, +_vertical_gradient_level, *_vertical_gradient_level_ind,
	157	! +surface_waterflux_*
[601]	158	!
[2259]	159	! in addition, steering parameters parameters of the two-moment cloud physics
	160	! scheme:
[1053]	161	! +cloud_scheme, +drizzle, +mu_constant, +mu_constant_value, +ventilation_effect
[1017]	162	!
[1037]	163	! 1036 2012-10-22 13:43:42Z raasch
	164	! code put under GPL (PALM 3.9)
	165	!
[1017]	166	! 1015 2012-09-27 09:23:24Z raasch
	167	! -adjust_mixing_length
	168	!
[1004]	169	! 1003 2012-09-14 14:35:53Z raasch
	170	! -grid_matching
	171	!
[1002]	172	! 1001 2012-09-13 14:08:46Z raasch
	173	! -cut_spline_overshoot, dt_fixed, last_dt_change, long_filter_factor,
	174	! overshoot_limit_, ups_limit_
	175	!
[979]	176	! 978 2012-08-09 08:28:32Z fricke
	177	! -km_damp_max, outflow_damping_width
	178	! +pt_damping_factor, pt_damping_width
	179	! +z0h_factor
	180	!
[941]	181	! 940 2012-07-09 14:31:00Z raasch
	182	! +neutral
	183	!
[928]	184	! 927 2012-06-06 19:15:04Z raasch
	185	! +masking_method
	186	!
[850]	187	! 849 2012-03-15 10:35:09Z raasch
	188	! first_call_advec_particles renamed first_call_lpm
	189	!
[826]	190	! 824 2012-02-17 09:09:57Z raasch
	191	! +curvature_solution_effects
	192	!
[1]	193	! Revision 1.1 1998/03/18 20:18:48 raasch
	194	! Initial revision
	195	!
	196	!
	197	! Description:
	198	! ------------
[1682]	199	!> Reading values of global control variables from restart-file (binary format)
[1]	200	!------------------------------------------------------------------------------!
[1682]	201	SUBROUTINE read_var_list
[1]	202
[2259]	203
[1320]	204	USE arrays_3d, &
[1484]	205	ONLY: inflow_damping_factor, mean_inflow_profiles, pt_init, &
[1960]	206	q_init, ref_state, s_init, sa_init, u_init, ug, v_init, vg
[1320]	207
[87]	208	USE control_parameters
[1320]	209
[1957]	210	USE flight_mod, &
	211	ONLY: flight_read_restart_data
[2259]	212
[1320]	213	USE grid_variables, &
	214	ONLY: dx, dy
	215
	216	USE indices, &
	217	ONLY: nz, nx, nx_on_file, ny, ny_on_file
	218
[1849]	219	USE microphysics_mod, &
	220	ONLY: c_sedimentation, collision_turbulence, &
	221	cloud_water_sedimentation, limiter_sedimentation, &
	222	nc_const, ventilation_effect
	223
[1320]	224	USE model_1d, &
	225	ONLY: damp_level_1d, dt_pr_1d, dt_run_control_1d, end_time_1d
	226
[1783]	227	USE netcdf_interface, &
	228	ONLY: netcdf_precision, output_for_t0
[1320]	229
	230	USE particle_attributes, &
[2265]	231	ONLY: curvature_solution_effects
[1320]	232
[1]	233	USE pegrid
	234
[1585]	235	USE radiation_model_mod, &
[1833]	236	ONLY: time_radiation
[1585]	237
[1833]	238	USE spectra_mod, &
	239	ONLY: average_count_sp
	240
[1320]	241	USE statistics, &
	242	ONLY: statistic_regions, hom, hom_sum, pr_palm, u_max, u_max_ijk, &
	243	v_max, v_max_ijk, w_max, w_max_ijk
	244
[2259]	245	USE synthetic_turbulence_generator_mod, &
	246	ONLY: stg_read_restart_data
[1691]	247
[1]	248	IMPLICIT NONE
	249
	250	CHARACTER (LEN=10) :: binary_version, version_on_file
	251	CHARACTER (LEN=30) :: variable_chr
[87]	252
[143]	253
[1]	254	CALL check_open( 13 )
	255
	256	!
	257	!-- Make version number check first
	258	READ ( 13 ) version_on_file
[1831]	259	binary_version = '4.1'
[1]	260	IF ( TRIM( version_on_file ) /= TRIM( binary_version ) ) THEN
[257]	261	WRITE( message_string, * ) 'version mismatch concerning control ', &
	262	'variables', &
	263	'&version on file = "', &
	264	TRIM( version_on_file ), '"', &
	265	'&version on program = "', &
	266	TRIM( binary_version ), '"'
	267	CALL message( 'read_var_list', 'PA0296', 1, 2, 0, 6, 0 )
[1]	268	ENDIF
	269
	270	!
[145]	271	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
	272	!-- run
	273	READ ( 13 ) variable_chr
	274	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
[274]	275	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
	276	'run on PE ', myid
[257]	277	CALL message( 'read_var_list', 'PA0297', 1, 2, 0, 6, 0 )
[145]	278	ENDIF
	279	READ ( 13 ) numprocs_previous_run
	280
[146]	281	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
	282	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
	283	ENDIF
[145]	284
	285	READ ( 13 ) variable_chr
	286	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
[257]	287	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
	288	'prior run on PE ', myid
	289	CALL message( 'read_var_list', 'PA0298', 1, 2, 0, 6, 0 )
[145]	290	ENDIF
	291	READ ( 13 ) hor_index_bounds_previous_run
	292
	293	!
[1]	294	!-- Read vertical number of gridpoints and number of different areas used
	295	!-- for computing statistics. Allocate arrays depending on these values,
	296	!-- which are needed for the following read instructions.
	297	READ ( 13 ) variable_chr
	298	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
[257]	299	WRITE( message_string, * ) 'nz not found in data from prior run on PE ',&
	300	myid
	301	CALL message( 'read_var_list', 'PA0299', 1, 2, 0, 6, 0 )
[1]	302	ENDIF
	303	READ ( 13 ) nz
[87]	304
[1]	305	READ ( 13 ) variable_chr
[87]	306	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
[257]	307	WRITE( message_string, * ) 'max_pr_user not found in data from ', &
[87]	308	'prior run on PE ', myid
[257]	309	CALL message( 'read_var_list', 'PA0300', 1, 2, 0, 6, 0 )
[87]	310	ENDIF
[159]	311	READ ( 13 ) max_pr_user ! This value is checked against the number of
	312	! user profiles given for the current run
	313	! in routine user_parin (it has to match)
[87]	314
	315	READ ( 13 ) variable_chr
[1]	316	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
[257]	317	WRITE( message_string, * ) 'statistic_regions not found in data from ', &
[1]	318	'prior run on PE ', myid
[257]	319	CALL message( 'read_var_list', 'PA0301', 1, 2, 0, 6, 0 )
[1]	320	ENDIF
	321	READ ( 13 ) statistic_regions
[146]	322	IF ( .NOT. ALLOCATED( ug ) ) THEN
[1502]	323	ALLOCATE( ug(0:nz+1), u_init(0:nz+1), vg(0:nz+1), &
	324	v_init(0:nz+1), pt_init(0:nz+1), q_init(0:nz+1), &
[1960]	325	ref_state(0:nz+1), s_init(0:nz+1), sa_init(0:nz+1), &
[1502]	326	hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions), &
[146]	327	hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) )
	328	ENDIF
[1]	329
	330	!
	331	!-- Now read all control parameters:
	332	!-- Caution: When the following read instructions have been changed, the
	333	!-- ------- version number stored in the variable binary_version has to be
	334	!-- increased. The same changes must also be done in write_var_list.
	335	READ ( 13 ) variable_chr
	336	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	337
	338	SELECT CASE ( TRIM( variable_chr ) )
	339
	340	CASE ( 'advected_distance_x' )
	341	READ ( 13 ) advected_distance_x
	342	CASE ( 'advected_distance_y' )
	343	READ ( 13 ) advected_distance_y
	344	CASE ( 'alpha_surface' )
	345	READ ( 13 ) alpha_surface
	346	CASE ( 'average_count_pr' )
	347	READ ( 13 ) average_count_pr
	348	CASE ( 'average_count_sp' )
	349	READ ( 13 ) average_count_sp
	350	CASE ( 'average_count_3d' )
	351	READ ( 13 ) average_count_3d
	352	CASE ( 'bc_e_b' )
	353	READ ( 13 ) bc_e_b
	354	CASE ( 'bc_lr' )
	355	READ ( 13 ) bc_lr
	356	CASE ( 'bc_ns' )
	357	READ ( 13 ) bc_ns
	358	CASE ( 'bc_p_b' )
	359	READ ( 13 ) bc_p_b
	360	CASE ( 'bc_p_t' )
	361	READ ( 13 ) bc_p_t
	362	CASE ( 'bc_pt_b' )
	363	READ ( 13 ) bc_pt_b
	364	CASE ( 'bc_pt_t' )
	365	READ ( 13 ) bc_pt_t
	366	CASE ( 'bc_pt_t_val' )
	367	READ ( 13 ) bc_pt_t_val
	368	CASE ( 'bc_q_b' )
	369	READ ( 13 ) bc_q_b
	370	CASE ( 'bc_q_t' )
	371	READ ( 13 ) bc_q_t
	372	CASE ( 'bc_q_t_val' )
	373	READ ( 13 ) bc_q_t_val
	374	CASE ( 'bc_s_b' )
	375	READ ( 13 ) bc_s_b
	376	CASE ( 'bc_s_t' )
	377	READ ( 13 ) bc_s_t
[95]	378	CASE ( 'bc_sa_t' )
	379	READ ( 13 ) bc_sa_t
[1]	380	CASE ( 'bc_uv_b' )
	381	READ ( 13 ) bc_uv_b
	382	CASE ( 'bc_uv_t' )
	383	READ ( 13 ) bc_uv_t
[95]	384	CASE ( 'bottom_salinityflux' )
	385	READ ( 13 ) bottom_salinityflux
[1]	386	CASE ( 'building_height' )
	387	READ ( 13 ) building_height
	388	CASE ( 'building_length_x' )
	389	READ ( 13 ) building_length_x
	390	CASE ( 'building_length_y' )
	391	READ ( 13 ) building_length_y
	392	CASE ( 'building_wall_left' )
	393	READ ( 13 ) building_wall_left
	394	CASE ( 'building_wall_south' )
	395	READ ( 13 ) building_wall_south
[600]	396	CASE ( 'call_psolver_at_all_substeps' )
	397	READ ( 13 ) call_psolver_at_all_substeps
[240]	398	CASE ( 'canyon_height' )
	399	READ ( 13 ) canyon_height
	400	CASE ( 'canyon_width_x' )
	401	READ ( 13 ) canyon_width_x
	402	CASE ( 'canyon_width_y' )
	403	READ ( 13 ) canyon_width_y
	404	CASE ( 'canyon_wall_left' )
	405	READ ( 13 ) canyon_wall_left
	406	CASE ( 'canyon_wall_south' )
	407	READ ( 13 ) canyon_wall_south
[1065]	408	CASE ( 'c_sedimentation' )
	409	READ ( 13 ) c_sedimentation
[600]	410	CASE ( 'cfl_factor' )
	411	READ ( 13 ) cfl_factor
[1]	412	CASE ( 'cloud_droplets' )
	413	READ ( 13 ) cloud_droplets
	414	CASE ( 'cloud_physics' )
	415	READ ( 13 ) cloud_physics
[1053]	416	CASE ( 'cloud_scheme' )
	417	READ ( 13 ) cloud_scheme
[622]	418	CASE ( 'collective_wait' )
	419	READ ( 13 ) collective_wait
[1]	420	CASE ( 'conserve_volume_flow' )
	421	READ ( 13 ) conserve_volume_flow
[241]	422	CASE ( 'conserve_volume_flow_mode' )
	423	READ ( 13 ) conserve_volume_flow_mode
[1691]	424	CASE ( 'constant_flux_layer' )
	425	READ ( 13 ) constant_flux_layer
[291]	426	CASE ( 'coupling_start_time' )
	427	READ ( 13 ) coupling_start_time
[1]	428	CASE ( 'current_timestep_number' )
	429	READ ( 13 ) current_timestep_number
[824]	430	CASE ( 'curvature_solution_effects' )
	431	READ ( 13 ) curvature_solution_effects
[600]	432	CASE ( 'cycle_mg' )
	433	READ ( 13 ) cycle_mg
[1]	434	CASE ( 'damp_level_1d' )
	435	READ ( 13 ) damp_level_1d
	436	CASE ( 'dissipation_1d' )
	437	READ ( 13 ) dissipation_1d
[1308]	438	CASE ( 'do2d_xy_time_count' )
	439	READ ( 13 ) do2d_xy_time_count
	440	CASE ( 'do2d_xz_time_count' )
	441	READ ( 13 ) do2d_xz_time_count
	442	CASE ( 'do2d_yz_time_count' )
	443	READ ( 13 ) do2d_yz_time_count
	444	CASE ( 'do3d_time_count' )
	445	READ ( 13 ) do3d_time_count
[240]	446	CASE ( 'dp_external' )
	447	READ ( 13 ) dp_external
	448	CASE ( 'dp_level_b' )
	449	READ ( 13 ) dp_level_b
	450	CASE ( 'dp_smooth' )
	451	READ ( 13 ) dp_smooth
	452	CASE ( 'dpdxy' )
	453	READ ( 13 ) dpdxy
[1831]	454	CASE ( 'cloud_water_sedimentation' )
	455	READ ( 13 ) cloud_water_sedimentation
[1]	456	CASE ( 'dt_pr_1d' )
	457	READ ( 13 ) dt_pr_1d
	458	CASE ( 'dt_run_control_1d' )
	459	READ ( 13 ) dt_run_control_1d
	460	CASE ( 'dt_3d' )
	461	READ ( 13 ) dt_3d
	462	CASE ( 'dvrp_filecount' )
	463	READ ( 13 ) dvrp_filecount
	464	CASE ( 'dx' )
	465	READ ( 13 ) dx
	466	CASE ( 'dy' )
	467	READ ( 13 ) dy
	468	CASE ( 'dz' )
	469	READ ( 13 ) dz
	470	CASE ( 'dz_max' )
	471	READ ( 13 ) dz_max
	472	CASE ( 'dz_stretch_factor' )
	473	READ ( 13 ) dz_stretch_factor
	474	CASE ( 'dz_stretch_level' )
	475	READ ( 13 ) dz_stretch_level
	476	CASE ( 'e_min' )
	477	READ ( 13 ) e_min
	478	CASE ( 'end_time_1d' )
	479	READ ( 13 ) end_time_1d
	480	CASE ( 'fft_method' )
	481	READ ( 13 ) fft_method
[849]	482	CASE ( 'first_call_lpm' )
	483	READ ( 13 ) first_call_lpm
[1]	484	CASE ( 'galilei_transformation' )
	485	READ ( 13 ) galilei_transformation
	486	CASE ( 'hom' )
	487	READ ( 13 ) hom
[143]	488	CASE ( 'hom_sum' )
	489	READ ( 13 ) hom_sum
[151]	490	CASE ( 'humidity' )
	491	READ ( 13 ) humidity
	492	CASE ( 'inflow_damping_factor' )
	493	IF ( .NOT. ALLOCATED( inflow_damping_factor ) ) THEN
	494	ALLOCATE( inflow_damping_factor(0:nz+1) )
	495	ENDIF
	496	READ ( 13 ) inflow_damping_factor
	497	CASE ( 'inflow_damping_height' )
	498	READ ( 13 ) inflow_damping_height
	499	CASE ( 'inflow_damping_width' )
	500	READ ( 13 ) inflow_damping_width
[1]	501	CASE ( 'inflow_disturbance_begin' )
	502	READ ( 13 ) inflow_disturbance_begin
	503	CASE ( 'inflow_disturbance_end' )
	504	READ ( 13 ) inflow_disturbance_end
	505	CASE ( 'km_constant' )
	506	READ ( 13 ) km_constant
[1241]	507	CASE ( 'large_scale_forcing' )
	508	READ ( 13 ) large_scale_forcing
[2320]	509	CASE ( 'large_scale_subsidence' )
[411]	510	READ ( 13 ) large_scale_subsidence
[1065]	511	CASE ( 'limiter_sedimentation' )
	512	READ ( 13 ) limiter_sedimentation
[63]	513	CASE ( 'loop_optimization' )
	514	READ ( 13 ) loop_optimization
[927]	515	CASE ( 'masking_method' )
	516	READ ( 13 ) masking_method
[151]	517	CASE ( 'mean_inflow_profiles' )
	518	IF ( .NOT. ALLOCATED( mean_inflow_profiles ) ) THEN
[1960]	519	ALLOCATE( mean_inflow_profiles(0:nz+1,7) )
[151]	520	ENDIF
	521	READ ( 13 ) mean_inflow_profiles
[600]	522	CASE ( 'mg_cycles' )
	523	READ ( 13 ) mg_cycles
	524	CASE ( 'mg_switch_to_pe0_level' )
	525	READ ( 13 ) mg_switch_to_pe0_level
[1]	526	CASE ( 'mixing_length_1d' )
	527	READ ( 13 ) mixing_length_1d
	528	CASE ( 'momentum_advec' )
	529	READ ( 13 ) momentum_advec
[1691]	530	CASE ( 'most_method' )
	531	READ ( 13 ) most_method
[1115]	532	CASE ( 'nc_const' )
	533	READ ( 13 ) nc_const
[1]	534	CASE ( 'netcdf_precision' )
	535	READ ( 13 ) netcdf_precision
[940]	536	CASE ( 'neutral' )
	537	READ ( 13 ) neutral
[600]	538	CASE ( 'ngsrb' )
	539	READ ( 13 ) ngsrb
	540	CASE ( 'nsor' )
	541	READ ( 13 ) nsor
[1]	542	CASE ( 'nsor_ini' )
	543	READ ( 13 ) nsor_ini
[1241]	544	CASE ( 'nudging' )
	545	READ ( 13 ) nudging
[1957]	546	CASE ( 'num_leg' )
	547	READ ( 13 ) num_leg
[1]	548	CASE ( 'nx' )
	549	READ ( 13 ) nx
[147]	550	nx_on_file = nx
[1]	551	CASE ( 'ny' )
	552	READ ( 13 ) ny
[147]	553	ny_on_file = ny
[94]	554	CASE ( 'ocean' )
	555	READ ( 13 ) ocean
[1]	556	CASE ( 'old_dt' )
	557	READ ( 13 ) old_dt
	558	CASE ( 'omega' )
	559	READ ( 13 ) omega
[600]	560	CASE ( 'omega_sor' )
	561	READ ( 13 ) omega_sor
[345]	562	CASE ( 'output_for_t0' )
	563	READ (13) output_for_t0
[1]	564	CASE ( 'passive_scalar' )
	565	READ ( 13 ) passive_scalar
	566	CASE ( 'phi' )
	567	READ ( 13 ) phi
[600]	568	CASE ( 'prandtl_number' )
	569	READ ( 13 ) prandtl_number
[1]	570	CASE ( 'precipitation' )
	571	READ ( 13 ) precipitation
[600]	572	CASE ( 'psolver' )
	573	READ ( 13 ) psolver
[978]	574	CASE ( 'pt_damping_factor' )
	575	READ ( 13 ) pt_damping_factor
	576	CASE ( 'pt_damping_width' )
	577	READ ( 13 ) pt_damping_width
[1]	578	CASE ( 'pt_init' )
	579	READ ( 13 ) pt_init
[57]	580	CASE ( 'pt_reference' )
	581	READ ( 13 ) pt_reference
[1]	582	CASE ( 'pt_surface' )
	583	READ ( 13 ) pt_surface
	584	CASE ( 'pt_surface_initial_change' )
	585	READ ( 13 ) pt_surface_initial_change
	586	CASE ( 'pt_vertical_gradient' )
	587	READ ( 13 ) pt_vertical_gradient
	588	CASE ( 'pt_vertical_gradient_level' )
	589	READ ( 13 ) pt_vertical_gradient_level
	590	CASE ( 'pt_vertical_gradient_level_ind' )
	591	READ ( 13 ) pt_vertical_gradient_level_ind
	592	CASE ( 'q_init' )
	593	READ ( 13 ) q_init
	594	CASE ( 'q_surface' )
	595	READ ( 13 ) q_surface
	596	CASE ( 'q_surface_initial_change' )
	597	READ ( 13 ) q_surface_initial_change
	598	CASE ( 'q_vertical_gradient' )
	599	READ ( 13 ) q_vertical_gradient
	600	CASE ( 'q_vertical_gradient_level' )
	601	READ ( 13 ) q_vertical_gradient_level
	602	CASE ( 'q_vertical_gradient_level_ind' )
	603	READ ( 13 ) q_vertical_gradient_level_ind
[1496]	604	CASE ( 'cloud_top_radiation' )
	605	READ ( 13 ) cloud_top_radiation
[1]	606	CASE ( 'random_generator' )
	607	READ ( 13 ) random_generator
	608	CASE ( 'random_heatflux' )
	609	READ ( 13 ) random_heatflux
[600]	610	CASE ( 'rayleigh_damping_factor' )
	611	READ ( 13 ) rayleigh_damping_factor
	612	CASE ( 'rayleigh_damping_height' )
	613	READ ( 13 ) rayleigh_damping_height
[151]	614	CASE ( 'recycling_width' )
	615	READ ( 13 ) recycling_width
[1560]	616	CASE ( 'recycling_yshift' )
	617	READ ( 13 ) recycling_yshift
[1179]	618	CASE ( 'reference_state' )
	619	READ ( 13 ) reference_state
	620	CASE ( 'ref_state' )
	621	READ ( 13 ) ref_state
[600]	622	CASE ( 'residual_limit' )
	623	READ ( 13 ) residual_limit
[1]	624	CASE ( 'roughness_length' )
	625	READ ( 13 ) roughness_length
	626	CASE ( 'runnr' )
	627	READ ( 13 ) runnr
[291]	628	CASE ( 'run_coupled' )
	629	READ ( 13 ) run_coupled
[1960]	630	CASE ( 's_init' )
	631	READ ( 13 ) s_init
	632	CASE ( 's_surface' )
	633	READ ( 13 ) s_surface
	634	CASE ( 's_surface_initial_change' )
	635	READ ( 13 ) s_surface_initial_change
	636	CASE ( 's_vertical_gradient' )
	637	READ ( 13 ) s_vertical_gradient
	638	CASE ( 's_vertical_gradient_level' )
	639	READ ( 13 ) s_vertical_gradient_level
	640	CASE ( 's_vertical_gradient_level_ind' )
[2259]	641	READ ( 13 ) s_vertical_gradient_level_ind
[94]	642	CASE ( 'sa_init' )
	643	READ ( 13 ) sa_init
	644	CASE ( 'sa_surface' )
	645	READ ( 13 ) sa_surface
	646	CASE ( 'sa_vertical_gradient' )
	647	READ ( 13 ) sa_vertical_gradient
	648	CASE ( 'sa_vertical_gradient_level' )
	649	READ ( 13 ) sa_vertical_gradient_level
[1]	650	CASE ( 'scalar_advec' )
	651	READ ( 13 ) scalar_advec
	652	CASE ( 'simulated_time' )
	653	READ ( 13 ) simulated_time
	654	CASE ( 'surface_heatflux' )
	655	READ ( 13 ) surface_heatflux
	656	CASE ( 'surface_pressure' )
	657	READ ( 13 ) surface_pressure
	658	CASE ( 'surface_scalarflux' )
[2259]	659	READ ( 13 ) surface_scalarflux
[1]	660	CASE ( 'surface_waterflux' )
[2259]	661	READ ( 13 ) surface_waterflux
[102]	662	CASE ( 'time_coupling' )
	663	READ ( 13 ) time_coupling
[1]	664	CASE ( 'time_disturb' )
	665	READ ( 13 ) time_disturb
[1502]	666	CASE ( 'time_dopr' )
[1]	667	READ ( 13 ) time_dopr
[587]	668	CASE ( 'time_domask' )
	669	READ ( 13 ) time_domask
[1]	670	CASE ( 'time_dopr_av' )
	671	READ ( 13 ) time_dopr_av
	672	CASE ( 'time_dopr_listing' )
	673	READ ( 13 ) time_dopr_listing
	674	CASE ( 'time_dopts' )
	675	READ ( 13 ) time_dopts
	676	CASE ( 'time_dosp' )
	677	READ ( 13 ) time_dosp
	678	CASE ( 'time_dots' )
	679	READ ( 13 ) time_dots
	680	CASE ( 'time_do2d_xy' )
	681	READ ( 13 ) time_do2d_xy
	682	CASE ( 'time_do2d_xz' )
	683	READ ( 13 ) time_do2d_xz
	684	CASE ( 'time_do2d_yz' )
	685	READ ( 13 ) time_do2d_yz
	686	CASE ( 'time_do3d' )
	687	READ ( 13 ) time_do3d
	688	CASE ( 'time_do_av' )
	689	READ ( 13 ) time_do_av
	690	CASE ( 'time_do_sla' )
	691	READ ( 13 ) time_do_sla
	692	CASE ( 'time_dvrp' )
	693	READ ( 13 ) time_dvrp
[1585]	694	CASE ( 'time_radiation' )
	695	READ ( 13 ) time_radiation
[1]	696	CASE ( 'time_restart' )
	697	READ ( 13 ) time_restart
	698	CASE ( 'time_run_control' )
	699	READ ( 13 ) time_run_control
[291]	700	CASE ( 'time_since_reference_point' )
	701	READ ( 13 ) time_since_reference_point
[1]	702	CASE ( 'timestep_scheme' )
	703	READ ( 13 ) timestep_scheme
	704	CASE ( 'topography' )
	705	READ ( 13 ) topography
[256]	706	CASE ( 'topography_grid_convention' )
	707	READ ( 13 ) topography_grid_convention
[19]	708	CASE ( 'top_heatflux' )
	709	READ ( 13 ) top_heatflux
[102]	710	CASE ( 'top_momentumflux_u' )
	711	READ ( 13 ) top_momentumflux_u
	712	CASE ( 'top_momentumflux_v' )
	713	READ ( 13 ) top_momentumflux_v
[94]	714	CASE ( 'top_salinityflux' )
	715	READ ( 13 ) top_salinityflux
[1992]	716	CASE ( 'top_scalarflux' )
	717	READ ( 13 ) top_scalarflux
[1]	718	CASE ( 'tsc' )
	719	READ ( 13 ) tsc
[1831]	720	CASE ( 'collision_turbulence' )
	721	READ ( 13 ) collision_turbulence
[2232]	722	CASE ( 'tunnel_height' )
	723	READ ( 13 ) tunnel_height
	724	CASE ( 'tunnel_length' )
	725	READ ( 13 ) tunnel_length
	726	CASE ( 'tunnel_width_x' )
	727	READ ( 13 ) tunnel_width_x
	728	CASE ( 'tunnel_width_y' )
	729	READ ( 13 ) tunnel_width_y
	730	CASE ( 'tunnel_wall_depth' )
	731	READ ( 13 ) tunnel_wall_depth
[151]	732	CASE ( 'turbulent_inflow' )
	733	READ ( 13 ) turbulent_inflow
[241]	734	CASE ( 'u_bulk' )
	735	READ ( 13 ) u_bulk
[1]	736	CASE ( 'u_init' )
	737	READ ( 13 ) u_init
	738	CASE ( 'u_max' )
	739	READ ( 13 ) u_max
	740	CASE ( 'u_max_ijk' )
	741	READ ( 13 ) u_max_ijk
	742	CASE ( 'ug' )
	743	READ ( 13 ) ug
	744	CASE ( 'ug_surface' )
	745	READ ( 13 ) ug_surface
	746	CASE ( 'ug_vertical_gradient' )
	747	READ ( 13 ) ug_vertical_gradient
	748	CASE ( 'ug_vertical_gradient_level' )
	749	READ ( 13 ) ug_vertical_gradient_level
	750	CASE ( 'ug_vertical_gradient_level_ind' )
	751	READ ( 13 ) ug_vertical_gradient_level_ind
	752	CASE ( 'use_surface_fluxes' )
	753	READ ( 13 ) use_surface_fluxes
[20]	754	CASE ( 'use_top_fluxes' )
	755	READ ( 13 ) use_top_fluxes
[1]	756	CASE ( 'use_ug_for_galilei_tr' )
	757	READ ( 13 ) use_ug_for_galilei_tr
	758	CASE ( 'use_upstream_for_tke' )
	759	READ ( 13 ) use_upstream_for_tke
[241]	760	CASE ( 'v_bulk' )
	761	READ ( 13 ) v_bulk
[1]	762	CASE ( 'v_init' )
	763	READ ( 13 ) v_init
	764	CASE ( 'v_max' )
	765	READ ( 13 ) v_max
	766	CASE ( 'v_max_ijk' )
	767	READ ( 13 ) v_max_ijk
[1053]	768	CASE ( 'ventilation_effect' )
	769	READ ( 13 ) ventilation_effect
[1]	770	CASE ( 'vg' )
	771	READ ( 13 ) vg
	772	CASE ( 'vg_surface' )
	773	READ ( 13 ) vg_surface
	774	CASE ( 'vg_vertical_gradient' )
	775	READ ( 13 ) vg_vertical_gradient
	776	CASE ( 'vg_vertical_gradient_level' )
	777	READ ( 13 ) vg_vertical_gradient_level
	778	CASE ( 'vg_vertical_gradient_level_ind' )
	779	READ ( 13 ) vg_vertical_gradient_level_ind
[1957]	780	CASE ( 'virtual_flight' )
[2259]	781	READ ( 13 ) virtual_flight
[143]	782	CASE ( 'volume_flow_area' )
	783	READ ( 13 ) volume_flow_area
	784	CASE ( 'volume_flow_initial' )
	785	READ ( 13 ) volume_flow_initial
[1]	786	CASE ( 'wall_adjustment' )
	787	READ ( 13 ) wall_adjustment
[580]	788	CASE ( 'subs_vertical_gradient' )
	789	READ ( 13 ) subs_vertical_gradient
	790	CASE ( 'subs_vertical_gradient_level' )
	791	READ ( 13 ) subs_vertical_gradient_level
	792	CASE ( 'subs_vertical_gradient_level_i' )
	793	READ ( 13 ) subs_vertical_gradient_level_i
[2042]	794	CASE ( 'wall_heatflux' )
	795	READ ( 13 ) wall_heatflux
[2232]	796	CASE ( 'wall_humidityflux' )
	797	READ ( 13 ) wall_humidityflux
	798	CASE ( 'wall_scalarflux' )
	799	READ ( 13 ) wall_scalarflux
	800	CASE ( 'wall_salinityflux' )
	801	READ ( 13 ) wall_salinityflux
[1]	802	CASE ( 'w_max' )
	803	READ ( 13 ) w_max
	804	CASE ( 'w_max_ijk' )
	805	READ ( 13 ) w_max_ijk
[1691]	806	CASE ( 'zeta_max' )
	807	READ ( 13 ) zeta_max
	808	CASE ( 'zeta_min' )
	809	READ ( 13 ) zeta_min
[978]	810	CASE ( 'z0h_factor' )
	811	READ ( 13 ) z0h_factor
[1]	812
	813	CASE DEFAULT
[257]	814	WRITE( message_string, * ) 'unknown variable named "', &
	815	TRIM( variable_chr ), '" found in', &
[2259]	816	' data from prior run on PE ', myid
[257]	817	CALL message( 'read_var_list', 'PA0302', 1, 2, 0, 6, 0 )
[1]	818	END SELECT
	819	!
	820	!-- Read next string
	821	READ ( 13 ) variable_chr
	822
	823	ENDDO
[2259]	824
[1957]	825	IF ( virtual_flight ) CALL flight_read_restart_data
[1]	826
[2259]	827	IF ( synthetic_turbulence_generator ) CALL stg_read_restart_data
[1]	828
[146]	829	END SUBROUTINE read_var_list
[143]	830
[146]	831
	832
[147]	833	!------------------------------------------------------------------------------!
	834	! Description:
	835	! ------------
[1682]	836	!> Skipping the global control variables from restart-file (binary format)
	837	!> except some information needed when reading restart data from a previous
	838	!> run which used a smaller total domain or/and a different domain decomposition.
[147]	839	!------------------------------------------------------------------------------!
[2259]	840
[1682]	841	SUBROUTINE read_parts_of_var_list
[147]	842
[1682]	843
[1320]	844	USE arrays_3d, &
[1960]	845	ONLY: inflow_damping_factor, mean_inflow_profiles, ref_state, ug, vg
[1320]	846
[147]	847	USE control_parameters
[1320]	848
	849	USE indices, &
	850	ONLY: nz, nx, nx_on_file, ny, ny_on_file
	851
	852	USE kinds
	853
[147]	854	USE pegrid
	855
[1320]	856	USE statistics, &
	857	ONLY: statistic_regions, hom, hom_sum, pr_palm, u_max, u_max_ijk, &
	858	v_max, v_max_ijk, w_max, w_max_ijk
	859
[147]	860	IMPLICIT NONE
	861
	862	CHARACTER (LEN=10) :: version_on_file
[1521]	863	CHARACTER (LEN=20) :: momentum_advec_check
	864	CHARACTER (LEN=20) :: scalar_advec_check
[147]	865	CHARACTER (LEN=30) :: variable_chr
[626]	866	CHARACTER (LEN=1) :: cdum
[147]	867
[1320]	868	INTEGER(iwp) :: max_pr_user_on_file
	869	INTEGER(iwp) :: nz_on_file
	870	INTEGER(iwp) :: statistic_regions_on_file
	871	INTEGER(iwp) :: tmp_mpru
	872	INTEGER(iwp) :: tmp_sr
[147]	873
[1320]	874	REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: hom_sum_on_file
	875	REAL(wp), DIMENSION(:,:,:,:), ALLOCATABLE :: hom_on_file
[147]	876
	877
	878	CALL check_open( 13 )
	879
	880	READ ( 13 ) version_on_file
	881
[2232]	882
[147]	883	!
	884	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
	885	!-- run
	886	READ ( 13 ) variable_chr
	887	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
[274]	888	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
	889	'run on PE ', myid
[257]	890	CALL message( 'read_parts_of_var_list', 'PA0297', 1, 2, 0, 6, 0 )
[147]	891	ENDIF
	892	READ ( 13 ) numprocs_previous_run
	893
	894	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
	895	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
	896	ENDIF
	897
	898	READ ( 13 ) variable_chr
	899	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
[257]	900	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
	901	'prior run on PE ', myid
	902	CALL message( 'read_parts_of_var_list', 'PA0298', 1, 2, 0, 6, 0 )
[147]	903	ENDIF
	904	READ ( 13 ) hor_index_bounds_previous_run
	905
	906	!
	907	!-- Read vertical number of gridpoints and number of different areas used
	908	!-- for computing statistics. Allocate arrays depending on these values,
	909	!-- which are needed for the following read instructions.
	910	READ ( 13 ) variable_chr
	911	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
[257]	912	message_string = 'nz not found in restart data file'
	913	CALL message( 'read_parts_of_var_list', 'PA0303', 1, 2, 0, 6, 0 )
[147]	914	ENDIF
	915	READ ( 13 ) nz_on_file
	916	IF ( nz_on_file /= nz ) THEN
[257]	917	WRITE( message_string, * ) 'mismatch concerning number of ', &
[274]	918	'gridpoints along z', &
	919	'&nz on file = "', nz_on_file, '"', &
	920	'&nz from run = "', nz, '"'
[257]	921	CALL message( 'read_parts_of_var_list', 'PA0304', 1, 2, 0, 6, 0 )
[147]	922	ENDIF
	923
	924	READ ( 13 ) variable_chr
	925	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
[257]	926	message_string = 'max_pr_user not found in restart data file'
	927	CALL message( 'read_parts_of_var_list', 'PA0305', 1, 2, 0, 6, 0 )
[147]	928	ENDIF
	929	READ ( 13 ) max_pr_user_on_file
[170]	930	IF ( max_pr_user_on_file /= max_pr_user ) THEN
[274]	931	WRITE( message_string, * ) 'number of user profiles on res', &
	932	'tart data file differs from the current ', &
	933	'run&max_pr_user on file = "', &
	934	max_pr_user_on_file, '"', &
	935	'&max_pr_user from run = "', &
[257]	936	max_pr_user, '"'
	937	CALL message( 'read_parts_of_var_list', 'PA0306', 0, 0, 0, 6, 0 )
[170]	938	tmp_mpru = MIN( max_pr_user_on_file, max_pr_user )
	939	ELSE
	940	tmp_mpru = max_pr_user
[147]	941	ENDIF
	942
	943	READ ( 13 ) variable_chr
	944	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
[257]	945	message_string = 'statistic_regions not found in restart data file'
	946	CALL message( 'read_parts_of_var_list', 'PA0307', 1, 2, 0, 6, 0 )
[147]	947	ENDIF
	948	READ ( 13 ) statistic_regions_on_file
[173]	949	IF ( statistic_regions_on_file /= statistic_regions ) THEN
[2259]	950	WRITE( message_string, * ) 'statistic regions on restart data file ',&
[274]	951	'differ from the current run', &
	952	'&statistic regions on file = "', &
	953	statistic_regions_on_file, '"', &
	954	'&statistic regions from run = "', &
	955	statistic_regions, '"', &
[257]	956	'&statistic data may be lost!'
	957	CALL message( 'read_parts_of_var_list', 'PA0308', 0, 1, 0, 6, 0 )
[170]	958	tmp_sr = MIN( statistic_regions_on_file, statistic_regions )
	959	ELSE
	960	tmp_sr = statistic_regions
[147]	961	ENDIF
	962
	963	!
	964	!-- Now read and check some control parameters and skip the rest
	965	READ ( 13 ) variable_chr
	966
	967	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	968
	969	SELECT CASE ( TRIM( variable_chr ) )
	970
[151]	971	CASE ( 'average_count_pr' )
	972	READ ( 13 ) average_count_pr
[257]	973	IF ( average_count_pr /= 0 ) THEN
[274]	974	WRITE( message_string, * ) 'inflow profiles not temporally ', &
	975	'averaged. &Averaging will be done now using ', &
	976	average_count_pr, ' samples.'
	977	CALL message( 'read_parts_of_var_list', 'PA0309', &
	978	0, 1, 0, 6, 0 )
[151]	979	ENDIF
	980
[147]	981	CASE ( 'hom' )
	982	ALLOCATE( hom_on_file(0:nz+1,2,pr_palm+max_pr_user_on_file, &
	983	0:statistic_regions_on_file) )
	984	READ ( 13 ) hom_on_file
[170]	985	hom(:,:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
	986	hom_on_file(:,:,1:pr_palm+tmp_mpru,0:tmp_sr)
[147]	987	DEALLOCATE( hom_on_file )
	988
[151]	989	CASE ( 'hom_sum' )
	990	ALLOCATE( hom_sum_on_file(0:nz+1,pr_palm+max_pr_user_on_file, &
	991	0:statistic_regions_on_file) )
	992	READ ( 13 ) hom_sum_on_file
[170]	993	hom_sum(:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
	994	hom_sum_on_file(:,1:pr_palm+tmp_mpru,0:tmp_sr)
[151]	995	DEALLOCATE( hom_sum_on_file )
	996
[1521]	997	CASE ( 'momentum_advec' )
	998	momentum_advec_check = momentum_advec
	999	READ ( 13 ) momentum_advec
	1000	IF ( TRIM( momentum_advec_check ) /= TRIM( momentum_advec ) ) THEN
[1524]	1001	WRITE( message_string, * ) 'momentum_advec of the restart run ',&
[1521]	1002	'differs from momentum_advec of the initial run.'
	1003	CALL message( 'read_parts_of_var_list', 'PA0100', &
	1004	1, 2, 0, 6, 0 )
[2259]	1005	END IF
	1006
[147]	1007	CASE ( 'nx' )
	1008	READ ( 13 ) nx_on_file
	1009
	1010	CASE ( 'ny' )
	1011	READ ( 13 ) ny_on_file
	1012
[1253]	1013	CASE ( 'ref_state' )
	1014	READ ( 13 ) ref_state
[147]	1015
[1521]	1016	CASE ( 'scalar_advec' )
	1017	scalar_advec_check = scalar_advec
	1018	READ ( 13 ) scalar_advec
	1019	IF ( TRIM( scalar_advec_check ) /= TRIM( scalar_advec ) ) THEN
[1524]	1020	WRITE( message_string, * ) 'scalar_advec of the restart run ', &
[1521]	1021	'differs from scalar_advec of the initial run.'
	1022	CALL message( 'read_parts_of_var_list', 'PA0101', &
	1023	1, 2, 0, 6, 0 )
[2259]	1024	END IF
	1025
[147]	1026	CASE DEFAULT
	1027
[626]	1028	READ ( 13 ) cdum
[147]	1029
	1030	END SELECT
	1031
	1032	READ ( 13 ) variable_chr
	1033
	1034	ENDDO
	1035
[151]	1036	!
	1037	!-- Calculate the temporal average of vertical profiles, if neccessary
	1038	IF ( average_count_pr /= 0 ) THEN
[1322]	1039	hom_sum = hom_sum / REAL( average_count_pr, KIND=wp )
[151]	1040	ENDIF
[147]	1041
[151]	1042
[147]	1043	END SUBROUTINE read_parts_of_var_list
	1044
	1045
	1046
[146]	1047	!------------------------------------------------------------------------------!
	1048	! Description:
	1049	! ------------
[1682]	1050	!> Skipping the global control variables from restart-file (binary format)
[146]	1051	!------------------------------------------------------------------------------!
[2259]	1052
[1682]	1053	SUBROUTINE skip_var_list
[146]	1054
[1957]	1055	USE control_parameters, &
	1056	ONLY: virtual_flight
[2259]	1057
[1957]	1058	USE flight_mod, &
	1059	ONLY: flight_skip_var_list
[2259]	1060
[147]	1061	IMPLICIT NONE
	1062
[146]	1063	CHARACTER (LEN=10) :: version_on_file
	1064	CHARACTER (LEN=30) :: variable_chr
	1065
[600]	1066	CHARACTER (LEN=1) :: cdum
[146]	1067
	1068
	1069	READ ( 13 ) version_on_file
	1070
	1071	READ ( 13 ) variable_chr
	1072
	1073	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	1074
[600]	1075	READ ( 13 ) cdum
[146]	1076	READ ( 13 ) variable_chr
	1077
	1078	ENDDO
[1957]	1079	!
[2259]	1080	!-- In case of virtual flights, skip also variables related to
[1957]	1081	!-- this module.
	1082	IF ( virtual_flight ) CALL flight_skip_var_list
[146]	1083
[2259]	1084
[146]	1085	END SUBROUTINE skip_var_list

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |