Home

Context Navigation

read_3d_binary.f90 @ 113

Last change on this file since 113 was 110, checked in by raasch, 17 years ago

New:
---
Allows runs for a coupled atmosphere-ocean LES,
coupling frequency is controlled by new d3par-parameter dt_coupling,
the coupling mode (atmosphere_to_ocean or ocean_to_atmosphere) for the
respective processes is read from environment variable coupling_mode,
which is set by the mpiexec-command,
communication between the two models is done using the intercommunicator
comm_inter,
local files opened by the ocean model get the additional suffic "_O".
Assume saturation at k=nzb_s_inner(j,i) for atmosphere coupled to ocean.

A momentum flux can be set as top boundary condition using the new
inipar parameter top_momentumflux_u|v.

Non-cyclic boundary conditions can be used along all horizontal directions.

Quantities w*p* and w"e can be output as vertical profiles.

Initial profiles are reset to constant profiles in case that initializing_actions /= 'set_constant_profiles'. (init_rankine)

Optionally calculate km and kh from initial TKE e_init.

Changed:

Remaining variables iran changed to iran_part (advec_particles, init_particles).

In case that the presure solver is not called for every Runge-Kutta substep
(call_psolver_at_all_substeps = .F.), it is called after the first substep
instead of the last. In that case, random perturbations are also added to the
velocity field after the first substep.

Initialization of km,kh = 0.00001 for ocean = .T. (for ocean = .F. it remains 0.01).

Allow data_output_pr= q, wq, w"q", w*q* for humidity = .T. (instead of cloud_physics = .T.).

Errors:

Bugs from code parts for non-cyclic boundary conditions are removed: loops for
u and v are starting from index nxlu, nysv, respectively. The radiation boundary
condition is used for every Runge-Kutta substep. Velocity phase speeds for
the radiation boundary conditions are calculated for the first Runge-Kutta
substep only and reused for the further substeps. New arrays c_u, c_v, and c_w
are defined for this purpose. Several index errors are removed from the
radiation boundary condition code parts. Upper bounds for calculating
u_0 and v_0 (in production_e) are nxr+1 and nyn+1 because otherwise these
values are not available in case of non-cyclic boundary conditions.

+dots_num_palm in module user, +module netcdf_control in user_init (both in user_interface)

Bugfix: wrong sign removed from the buoyancy production term in the case use_reference = .T. (production_e)

Bugfix: Error message concerning output of particle concentration (pc) modified (check_parameters).

Bugfix: Rayleigh damping for ocean fixed.

Property svn:keywords set to Id

File size: 18.8 KB

Line
1	SUBROUTINE read_3d_binary
2
3	!------------------------------------------------------------------------------!
4	! Actual revisions:
5	! -----------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: read_3d_binary.f90 110 2007-10-05 05:13:14Z raasch $
11	!
12	! 102 2007-07-27 09:09:17Z raasch
13	! +uswst, uswst_m, vswst, vswst_m
14	!
15	! 96 2007-06-04 08:07:41Z raasch
16	! +rho_av, sa, sa_av, saswsb, saswst
17	!
18	! 73 2007-03-20 08:33:14Z raasch
19	! +precipitation_amount, precipitation_rate_av, rif_wall, u_m_l, u_m_r, etc.,
20	! z0_av
21	!
22	! 19 2007-02-23 04:53:48Z raasch
23	! +qswst, qswst_m, tswst, tswst_m
24	!
25	! RCS Log replace by Id keyword, revision history cleaned up
26	!
27	! Revision 1.4 2006/08/04 15:02:32 raasch
28	! +iran, iran_part
29	!
30	! Revision 1.1 2004/04/30 12:47:27 raasch
31	! Initial revision
32	!
33	!
34	! Description:
35	! ------------
36	! Binary input of variables and arrays from restart file
37	!------------------------------------------------------------------------------!
38
39	USE arrays_3d
40	USE averaging
41	USE cloud_parameters
42	USE control_parameters
43	USE cpulog
44	USE indices
45	USE interfaces
46	USE particle_attributes
47	USE pegrid
48	USE profil_parameter
49	USE random_function_mod
50	USE statistics
51
52	IMPLICIT NONE
53
54	CHARACTER (LEN=10) :: binary_version, version_on_file
55	CHARACTER (LEN=20) :: field_chr
56	CHARACTER (LEN=10), DIMENSION(:), ALLOCATABLE :: chdum10
57	CHARACTER (LEN=40), DIMENSION(:), ALLOCATABLE :: chdum40
58	CHARACTER (LEN=100), DIMENSION(:), ALLOCATABLE :: chdum100
59
60	INTEGER :: idum1, myid_on_file, numprocs_on_file, nxl_on_file, &
61	nxr_on_file, nyn_on_file, nys_on_file, nzb_on_file, nzt_on_file
62
63	INTEGER, DIMENSION(:), ALLOCATABLE :: idum
64
65	REAL, DIMENSION(:), ALLOCATABLE :: rdum
66
67	!
68	!-- Read data from previous model run. unit 13 already opened in parin
69	CALL cpu_log( log_point_s(14), 'read_3d_binary', 'start' )
70
71	!
72	!-- First compare the version numbers
73	READ ( 13 ) version_on_file
74	binary_version = '3.0'
75	IF ( TRIM( version_on_file ) /= TRIM( binary_version ) ) THEN
76	IF ( myid == 0 ) THEN
77	PRINT*, '+++ init_3d_model: version mismatch concerning data ', &
78	'from prior run'
79	PRINT*, ' version on file = "', TRIM( version_on_file ),&
80	'"'
81	PRINT*, ' version in program = "', TRIM( binary_version ), &
82	'"'
83	ENDIF
84	CALL local_stop
85	ENDIF
86
87	!
88	!-- Read and compare number of processors, processor-id and array ranges
89	READ ( 13 ) numprocs_on_file, myid_on_file, nxl_on_file, nxr_on_file, &
90	nys_on_file, nyn_on_file, nzb_on_file, nzt_on_file
91
92	IF ( numprocs_on_file /= numprocs ) THEN
93	PRINT*, '+++ init_3d_model: mismatch between actual data and data '
94	PRINT*, ' from prior run on PE ', myid
95	PRINT*, ' numprocs on file = ', numprocs_on_file
96	PRINT*, ' numprocs = ', numprocs
97	CALL local_stop
98	ENDIF
99
100	IF ( myid_on_file /= myid ) THEN
101	PRINT*, '+++ init_3d_model: mismatch between actual data and data '
102	PRINT*, ' from prior run'
103	PRINT*, ' myid_on_file = ', myid_on_file
104	PRINT*, ' myid = ', myid
105	#if defined( __parallel )
106	CALL MPI_ABORT( comm2d, 9999, ierr )
107	#else
108	CALL local_stop
109	#endif
110	ENDIF
111
112	IF ( nxl_on_file /= nxl ) THEN
113	PRINT*, '+++ init_3d_model: mismatch between actual data and data '
114	PRINT*, ' from prior run on PE ', myid
115	PRINT*, ' nxl on file = ', nxl_on_file
116	PRINT*, ' nxl = ', nxl
117	#if defined( __parallel )
118	CALL MPI_ABORT( comm2d, 9999, ierr )
119	#else
120	CALL local_stop
121	#endif
122	ENDIF
123
124	IF ( nxr_on_file /= nxr ) THEN
125	PRINT*, '+++ init_3d_model: mismatch between actual data and data '
126	PRINT*, ' from prior run on PE ', myid
127	PRINT*, ' nxr on file = ', nxr_on_file
128	PRINT*, ' nxr = ', nxr
129	#if defined( __parallel )
130	CALL MPI_ABORT( comm2d, 9999, ierr )
131	#else
132	CALL local_stop
133	#endif
134	ENDIF
135
136	IF ( nys_on_file /= nys ) THEN
137	PRINT*, '+++ init_3d_model: mismatch between actual data and data '
138	PRINT*, ' from prior run on PE ', myid
139	PRINT*, ' nys on file = ', nys_on_file
140	PRINT*, ' nys = ', nys
141	#if defined( __parallel )
142	CALL MPI_ABORT( comm2d, 9999, ierr )
143	#else
144	CALL local_stop
145	#endif
146	ENDIF
147
148	IF ( nyn_on_file /= nyn ) THEN
149	PRINT*, '+++ init_3d_model: mismatch between actual data and data '
150	PRINT*, ' from prior run on PE ', myid
151	PRINT*, ' nyn on file = ', nyn_on_file
152	PRINT*, ' nyn = ', nyn
153	#if defined( __parallel )
154	CALL MPI_ABORT( comm2d, 9999, ierr )
155	#else
156	CALL local_stop
157	#endif
158	ENDIF
159
160	IF ( nzb_on_file /= nzb ) THEN
161	PRINT*, '+++ init_3d_model: mismatch between actual data and data '
162	PRINT*, ' from prior run on PE ', myid
163	PRINT*, ' nzb on file = ', nzb_on_file
164	PRINT*, ' nzb = ', nzb
165	CALL local_stop
166	ENDIF
167
168	IF ( nzt_on_file /= nzt ) THEN
169	PRINT*, '+++ init_3d_model: mismatch between actual data and data '
170	PRINT*, ' from prior run on PE ', myid
171	PRINT*, ' nzt on file = ', nzt_on_file
172	PRINT*, ' nzt = ', nzt
173	CALL local_stop
174	ENDIF
175
176	!
177	!-- Local arrays that may be required for possible temporary information
178	!-- storage in the following
179	ALLOCATE( chdum10(crmax), chdum40(crmax), chdum100(crmax), &
180	idum(100crmax), rdum(100crmax) )
181
182	!
183	!-- Initialize spectra (for the case of just starting spectra computation
184	!-- in continuation runs)
185	IF ( dt_dosp /= 9999999.9 ) THEN
186	spectrum_x = 0.0
187	spectrum_y = 0.0
188	ENDIF
189
190	!
191	!-- Read arrays
192	!-- ATTENTION: If the following read commands have been altered, the
193	!-- ---------- version number of the variable binary_version must be altered,
194	!-- too. Furthermore, the output list of arrays in write_3d_binary
195	!-- must also be altered accordingly.
196	READ ( 13 ) field_chr
197	DO WHILE ( TRIM( field_chr ) /= '* end *' )
198
199	SELECT CASE ( TRIM( field_chr ) )
200
201	CASE ( 'e' )
202	READ ( 13 ) e
203	CASE ( 'e_av' )
204	ALLOCATE( e_av(nzb:nzt+1,nys-1:nyn+1,nxl-1:nxr+1) )
205	READ ( 13 ) e_av
206	CASE ( 'e_m' )
207	READ ( 13 ) e_m
208	CASE ( 'iran' )
209	READ ( 13 ) iran, iran_part
210	CASE ( 'kh' )
211	READ ( 13 ) kh
212	CASE ( 'kh_m' )
213	READ ( 13 ) kh_m
214	CASE ( 'km' )
215	READ ( 13 ) km
216	CASE ( 'km_m' )
217	READ ( 13 ) km_m
218	CASE ( 'lwp_av' )
219	ALLOCATE( lwp_av(nys-1:nyn+1,nxl-1:nxr+1) )
220	READ ( 13 ) lwp_av
221	CASE ( 'p' )
222	READ ( 13 ) p
223	CASE ( 'p_av' )
224	ALLOCATE( p_av(nzb:nzt+1,nys-1:nyn+1,nxl-1:nxr+1) )
225	READ ( 13 ) p_av
226	CASE ( 'pc_av' )
227	ALLOCATE( pc_av(nzb:nzt+1,nys-1:nyn+1,nxl-1:nxr+1) )
228	READ ( 13 ) pc_av
229	CASE ( 'pr_av' )
230	ALLOCATE( pr_av(nzb:nzt+1,nys-1:nyn+1,nxl-1:nxr+1) )
231	READ ( 13 ) pr_av
232	CASE ( 'precipitation_amount' )
233	READ ( 13 ) precipitation_amount
234	CASE ( 'precipitation_rate_a' )
235	ALLOCATE( precipitation_rate_av(nys-1:nyn+1,nxl-1:nxr+1) )
236	READ ( 13 ) precipitation_rate_av
237	CASE ( 'pt' )
238	READ ( 13 ) pt
239	CASE ( 'pt_av' )
240	ALLOCATE( pt_av(nzb:nzt+1,nys-1:nyn+1,nxl-1:nxr+1) )
241	READ ( 13 ) pt_av
242	CASE ( 'pt_m' )
243	READ ( 13 ) pt_m
244	CASE ( 'q' )
245	READ ( 13 ) q
246	CASE ( 'q_av' )
247	ALLOCATE( q_av(nzb:nzt+1,nys-1:nyn+1,nxl-1:nxr+1) )
248	READ ( 13 ) q_av
249	CASE ( 'q_m' )
250	READ ( 13 ) q_m
251	CASE ( 'ql' )
252	READ ( 13 ) ql
253	CASE ( 'ql_av' )
254	ALLOCATE( ql_av(nzb:nzt+1,nys-1:nyn+1,nxl-1:nxr+1) )
255	READ ( 13 ) ql_av
256	CASE ( 'ql_c_av' )
257	ALLOCATE( ql_c_av(nzb:nzt+1,nys-1:nyn+1,nxl-1:nxr+1) )
258	READ ( 13 ) ql_c_av
259	CASE ( 'ql_v_av' )
260	ALLOCATE( ql_v_av(nzb:nzt+1,nys-1:nyn+1,nxl-1:nxr+1) )
261	READ ( 13 ) ql_v_av
262	CASE ( 'ql_vp_av' )
263	ALLOCATE( ql_vp_av(nzb:nzt+1,nys-1:nyn+1,nxl-1:nxr+1) )
264	READ ( 13 ) ql_vp_av
265	CASE ( 'qs' )
266	READ ( 13 ) qs
267	CASE ( 'qsws' )
268	READ ( 13 ) qsws
269	CASE ( 'qsws_m' )
270	READ ( 13 ) qsws_m
271	CASE ( 'qswst' )
272	READ ( 13 ) qswst
273	CASE ( 'qswst_m' )
274	READ ( 13 ) qswst_m
275	CASE ( 'qv_av' )
276	ALLOCATE( qv_av(nzb:nzt+1,nys-1:nyn+1,nxl-1:nxr+1) )
277	READ ( 13 ) qv_av
278	CASE ( 'random_iv' )
279	READ ( 13 ) random_iv
280	READ ( 13 ) random_iy
281	CASE ( 'rho_av' )
282	ALLOCATE( rho_av(nzb:nzt+1,nys-1:nyn+1,nxl-1:nxr+1) )
283	READ ( 13 ) rho_av
284	CASE ( 'rif' )
285	READ ( 13 ) rif
286	CASE ( 'rif_m' )
287	READ ( 13 ) rif_m
288	CASE ( 'rif_wall' )
289	READ ( 13 ) rif_wall
290	CASE ( 's_av' )
291	ALLOCATE( s_av(nzb:nzt+1,nys-1:nyn+1,nxl-1:nxr+1) )
292	READ ( 13 ) s_av
293	CASE ( 'sa' )
294	READ ( 13 ) sa
295	CASE ( 'sa_av' )
296	ALLOCATE( sa_av(nzb:nzt+1,nys-1:nyn+1,nxl-1:nxr+1) )
297	READ ( 13 ) sa_av
298	CASE ( 'saswsb' )
299	READ ( 13 ) saswsb
300	CASE ( 'saswst' )
301	READ ( 13 ) saswst
302	CASE ( 'shf' )
303	READ ( 13 ) shf
304	CASE ( 'shf_m' )
305	READ ( 13 ) shf_m
306	CASE ( 'tswst' )
307	READ ( 13 ) tswst
308	CASE ( 'tswst_m' )
309	READ ( 13 ) tswst_m
310	CASE ( 'spectrum_x' )
311	READ ( 13 ) spectrum_x
312	CASE ( 'spectrum_y' )
313	READ ( 13 ) spectrum_y
314	CASE ( 'ts' )
315	READ ( 13 ) ts
316	CASE ( 'ts_av' )
317	ALLOCATE( ts_av(nys-1:nyn+1,nxl-1:nxr+1) )
318	READ ( 13 ) ts_av
319	CASE ( 'u' )
320	READ ( 13 ) u
321	CASE ( 'u_av' )
322	ALLOCATE( u_av(nzb:nzt+1,nys-1:nyn+1,nxl-1:nxr+1) )
323	READ ( 13 ) u_av
324	CASE ( 'u_m' )
325	READ ( 13 ) u_m
326	CASE ( 'u_m_l' )
327	READ ( 13 ) u_m_l
328	CASE ( 'u_m_n' )
329	READ ( 13 ) u_m_n
330	CASE ( 'u_m_r' )
331	READ ( 13 ) u_m_r
332	CASE ( 'u_m_s' )
333	READ ( 13 ) u_m_s
334	CASE ( 'us' )
335	READ ( 13 ) us
336	CASE ( 'usws' )
337	READ ( 13 ) usws
338	CASE ( 'uswst' )
339	READ ( 13 ) uswst
340	CASE ( 'usws_m' )
341	READ ( 13 ) usws_m
342	CASE ( 'uswst_m' )
343	READ ( 13 ) uswst_m
344	CASE ( 'us_av' )
345	ALLOCATE( us_av(nys-1:nyn+1,nxl-1:nxr+1) )
346	READ ( 13 ) us_av
347	CASE ( 'v' )
348	READ ( 13 ) v
349	CASE ( 'volume_flow_area' )
350	READ ( 13 ) volume_flow_area
351	CASE ( 'volume_flow_initial' )
352	READ ( 13 ) volume_flow_initial
353	CASE ( 'v_av' )
354	ALLOCATE( v_av(nzb:nzt+1,nys-1:nyn+1,nxl-1:nxr+1) )
355	READ ( 13 ) v_av
356	CASE ( 'v_m' )
357	READ (13 ) v_m
358	CASE ( 'v_m_l' )
359	READ ( 13 ) v_m_l
360	CASE ( 'v_m_n' )
361	READ ( 13 ) v_m_n
362	CASE ( 'v_m_r' )
363	READ ( 13 ) v_m_r
364	CASE ( 'v_m_s' )
365	READ ( 13 ) v_m_s
366	CASE ( 'vpt' )
367	READ ( 13 ) vpt
368	CASE ( 'vpt_av' )
369	ALLOCATE( vpt_av(nzb:nzt+1,nys-1:nyn+1,nxl-1:nxr+1) )
370	READ ( 13 ) vpt_av
371	CASE ( 'vpt_m' )
372	READ ( 13 ) vpt_m
373	CASE ( 'vsws' )
374	READ ( 13 ) vsws
375	CASE ( 'vswst' )
376	READ ( 13 ) vswst
377	CASE ( 'vsws_m' )
378	READ ( 13 ) vsws_m
379	CASE ( 'vswst_m' )
380	READ ( 13 ) vswst_m
381	CASE ( 'w' )
382	READ ( 13 ) w
383	CASE ( 'w_av' )
384	ALLOCATE( w_av(nzb:nzt+1,nys-1:nyn+1,nxl-1:nxr+1) )
385	READ ( 13 ) w_av
386	CASE ( 'w_m' )
387	READ ( 13 ) w_m
388	CASE ( 'w_m_l' )
389	READ ( 13 ) w_m_l
390	CASE ( 'w_m_n' )
391	READ ( 13 ) w_m_n
392	CASE ( 'w_m_r' )
393	READ ( 13 ) w_m_r
394	CASE ( 'w_m_s' )
395	READ ( 13 ) w_m_s
396	CASE ( 'z0' )
397	READ ( 13 ) z0
398	CASE ( 'z0_av' )
399	ALLOCATE( z0_av(nys-1:nyn+1,nxl-1:nxr+1) )
400	READ ( 13 ) z0_av
401
402	CASE ( 'cross_linecolors' )
403	IF ( use_prior_plot1d_parameters ) THEN
404	READ ( 13 ) cross_linecolors
405	ELSE
406	READ ( 13 ) idum
407	ENDIF
408	CASE ( 'cross_linestyles' )
409	IF ( use_prior_plot1d_parameters ) THEN
410	READ ( 13 ) cross_linestyles
411	ELSE
412	READ ( 13 ) idum
413	ENDIF
414	CASE ( 'cross_normalized_x' )
415	IF ( use_prior_plot1d_parameters ) THEN
416	READ ( 13 ) cross_normalized_x
417	ELSE
418	READ ( 13 ) chdum10
419	ENDIF
420	CASE ( 'cross_normalized_y' )
421	IF ( use_prior_plot1d_parameters ) THEN
422	READ ( 13 ) cross_normalized_y
423	ELSE
424	READ ( 13 ) chdum10
425	ENDIF
426	CASE ( 'cross_normx_factor' )
427	IF ( use_prior_plot1d_parameters ) THEN
428	READ ( 13 ) cross_normx_factor
429	ELSE
430	READ ( 13 ) rdum
431	ENDIF
432	CASE ( 'cross_normy_factor' )
433	IF ( use_prior_plot1d_parameters ) THEN
434	READ ( 13 ) cross_normy_factor
435	ELSE
436	READ ( 13 ) rdum
437	ENDIF
438	CASE ( 'cross_profiles' )
439	IF ( use_prior_plot1d_parameters ) THEN
440	READ ( 13 ) cross_profiles
441	ELSE
442	READ ( 13 ) chdum100
443	ENDIF
444	CASE ( 'cross_profile_n_coun' )
445	IF ( use_prior_plot1d_parameters ) THEN
446	READ ( 13 ) cross_profile_number_count
447	ELSE
448	READ ( 13 ) idum(1:crmax)
449	ENDIF
450	CASE ( 'cross_profile_number' )
451	IF ( use_prior_plot1d_parameters ) THEN
452	READ ( 13 ) cross_profile_numbers
453	ELSE
454	READ ( 13 ) idum
455	ENDIF
456	CASE ( 'cross_uxmax' )
457	IF ( use_prior_plot1d_parameters ) THEN
458	READ ( 13 ) cross_uxmax
459	ELSE
460	READ ( 13 ) rdum(1:crmax)
461	ENDIF
462	CASE ( 'cross_uxmax_computed' )
463	IF ( use_prior_plot1d_parameters ) THEN
464	READ ( 13 ) cross_uxmax_computed
465	ELSE
466	READ ( 13 ) rdum(1:crmax)
467	ENDIF
468	CASE ( 'cross_uxmax_normaliz' )
469	IF ( use_prior_plot1d_parameters ) THEN
470	READ ( 13 ) cross_uxmax_normalized
471	ELSE
472	READ ( 13 ) rdum(1:crmax)
473	ENDIF
474	CASE ( 'cross_uxmax_norm_com' )
475	IF ( use_prior_plot1d_parameters ) THEN
476	READ ( 13 ) cross_uxmax_normalized_computed
477	ELSE
478	READ ( 13 ) rdum(1:crmax)
479	ENDIF
480	CASE ( 'cross_uxmin' )
481	IF ( use_prior_plot1d_parameters ) THEN
482	READ ( 13 ) cross_uxmin
483	ELSE
484	READ ( 13 ) rdum(1:crmax)
485	ENDIF
486	CASE ( 'cross_uxmin_computed' )
487	IF ( use_prior_plot1d_parameters ) THEN
488	READ ( 13 ) cross_uxmin_computed
489	ELSE
490	READ ( 13 ) rdum(1:crmax)
491	ENDIF
492	CASE ( 'cross_uxmin_normaliz' )
493	IF ( use_prior_plot1d_parameters ) THEN
494	READ ( 13 ) cross_uxmin_normalized
495	ELSE
496	READ ( 13 ) rdum(1:crmax)
497	ENDIF
498	CASE ( 'cross_uxmin_norm_com' )
499	IF ( use_prior_plot1d_parameters ) THEN
500	READ ( 13 ) cross_uxmin_normalized_computed
501	ELSE
502	READ ( 13 ) rdum(1:crmax)
503	ENDIF
504	CASE ( 'cross_uymax' )
505	IF ( use_prior_plot1d_parameters ) THEN
506	READ ( 13 ) cross_uymax
507	ELSE
508	READ ( 13 ) rdum(1:crmax)
509	ENDIF
510	CASE ( 'cross_uymin' )
511	IF ( use_prior_plot1d_parameters ) THEN
512	READ ( 13 ) cross_uymin
513	ELSE
514	READ ( 13 ) rdum(1:crmax)
515	ENDIF
516	CASE ( 'cross_xtext' )
517	IF ( use_prior_plot1d_parameters ) THEN
518	READ ( 13 ) cross_xtext
519	ELSE
520	READ ( 13 ) chdum40
521	ENDIF
522	CASE ( 'dopr_crossindex' )
523	IF ( use_prior_plot1d_parameters ) THEN
524	READ ( 13 ) dopr_crossindex
525	ELSE
526	READ ( 13 ) idum(1:100)
527	ENDIF
528	CASE ( 'dopr_time_count' )
529	IF ( use_prior_plot1d_parameters ) THEN
530	READ ( 13 ) dopr_time_count
531	ELSE
532	READ ( 13 ) idum1
533	ENDIF
534	CASE ( 'hom_sum' )
535	READ ( 13 ) hom_sum
536	CASE ( 'profile_columns' )
537	IF ( use_prior_plot1d_parameters ) THEN
538	READ ( 13 ) profile_columns
539	ELSE
540	READ ( 13 ) idum1
541	ENDIF
542	CASE ( 'profile_number' )
543	IF ( use_prior_plot1d_parameters ) THEN
544	READ ( 13 ) profile_number
545	ELSE
546	READ ( 13 ) idum1
547	ENDIF
548	CASE ( 'profile_rows' )
549	IF ( use_prior_plot1d_parameters ) THEN
550	READ ( 13 ) profile_rows
551	ELSE
552	READ ( 13 ) idum1
553	ENDIF
554
555	CASE DEFAULT
556	PRINT*, '+++ init_3d_model: unknown field named "', &
557	TRIM( field_chr ), '" found in'
558	PRINT*, ' data from prior run on PE ', myid
559	CALL local_stop
560
561	END SELECT
562	!
563	!-- Read next character string
564	READ ( 13 ) field_chr
565
566	ENDDO
567
568	DEALLOCATE( chdum10, chdum40, chdum100, idum, rdum )
569
570	!
571	!-- End of time measuring for reading binary data
572	CALL cpu_log( log_point_s(14), 'read_3d_binary', 'stop' )
573
574	END SUBROUTINE read_3d_binary

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: palm/trunk/SOURCE/read_3d_binary.f90 @ 113

Download in other formats: