source: palm/trunk/SOURCE/parin.f90 @ 257

Last change on this file since 257 was 257, checked in by heinze, 13 years ago

Output of messages replaced by message handling routine

  • Property svn:keywords set to Id
File size: 11.7 KB
Line 
1 SUBROUTINE parin
2
3!------------------------------------------------------------------------------!
4! Current revisions:
5! -----------------
6! Output of messages replaced by message handling routine.
7! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
8! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
9! dp_smooth, dpdxy, u_bulk, v_bulk in inipar
10! topography_grid_convention moved from userpar
11!
12! Former revisions:
13! -----------------
14! $Id: parin.f90 257 2009-03-11 15:17:42Z heinze $
15!
16! 197 2008-09-16 15:29:03Z raasch
17! +cthf,leaf_surface_concentration, scalar_exchange_coefficient
18! +inflow_damping_height, inflow_damping_width, recycling_width,
19! turbulent_inflow in inipar, -skip_time_dosp in d3par,
20! allocation of hom_sum moved from init_3d_model to here,
21! npex, npey moved from inipar to d3par, setting of myid_char_14 removed,
22! lad is allways allocated
23!
24! 138 2007-11-28 10:03:58Z letzel
25! +canopy_mode, drag_coefficient, lad_surface, lad_vertical_gradient,
26! lad_vertical_gradient_level, pch_index, plant_canopy,
27! +allocation of leaf area density field
28!
29! 108 2007-08-24 15:10:38Z letzel
30! +e_init, top_momentumflux_u|v in inipar, +dt_coupling in d3par
31!
32! 95 2007-06-02 16:48:38Z raasch
33! +bc_sa_t, bottom_salinityflux, ocean, sa_surface, sa_vertical_gradient,
34! sa_vertical_gradient_level, top_salinityflux in inipar,
35! sa_init is allocated
36!
37! 87 2007-05-22 15:46:47Z raasch
38! Size of hom increased by the maximum number of user-defined profiles,
39! var_hom renamed pr_palm
40!
41! 82 2007-04-16 15:40:52Z raasch
42! +return_addres, return_username in envpar
43!
44! 75 2007-03-22 09:54:05Z raasch
45! +dt_max, netcdf_64bit_3d, precipitation_amount_interval in d3par,
46! +loop_optimization, pt_reference in inipar, -data_output_ts,
47! moisture renamed humidity
48!
49! 20 2007-02-26 00:12:32Z raasch
50! +top_heatflux, use_top_fluxes in inipar
51!
52! -netcdf_64bit_3d
53!
54! 3 2007-02-13 11:30:58Z raasch
55! +netcdf_64bit_3d in d3par,
56! RCS Log replace by Id keyword, revision history cleaned up
57!
58! Revision 1.57  2007/02/11 13:11:22  raasch
59! Values of environment variables are now read from file ENVPAR instead of
60! reading them with a system call, + NAMELIST envpar
61!
62! Revision 1.1  1997/07/24 11:22:50  raasch
63! Initial revision
64!
65!
66! Description:
67! ------------
68! This subroutine reads variables controling the run from the NAMELIST files
69!------------------------------------------------------------------------------!
70
71    USE arrays_3d
72    USE averaging
73    USE control_parameters
74    USE grid_variables
75    USE indices
76    USE model_1d
77    USE pegrid
78    USE profil_parameter
79    USE statistics
80
81    IMPLICIT NONE
82
83    INTEGER ::  idum
84
85
86    NAMELIST /inipar/  adjust_mixing_length, alpha_surface, bc_e_b, bc_lr, &
87                       bc_ns, bc_p_b, bc_p_t, bc_pt_b, bc_pt_t, bc_q_b, &
88             bc_q_t,bc_s_b, bc_s_t, bc_sa_t, bc_uv_b, bc_uv_t, &
89             bottom_salinityflux, building_height, building_length_x, &
90             building_length_y, building_wall_left, building_wall_south, &
91             canopy_mode, canyon_height, canyon_width_x, canyon_width_y, &
92             canyon_wall_left, canyon_wall_south, cloud_droplets, &
93             cloud_physics, conserve_volume_flow, conserve_volume_flow_mode, &
94             cthf, cut_spline_overshoot, &
95             damp_level_1d, dissipation_1d, dp_external, dp_level_b, &
96             dp_smooth, dpdxy, drag_coefficient, dt, dt_pr_1d, &
97             dt_run_control_1d, dx, dy, dz, dz_max, dz_stretch_factor, & 
98             dz_stretch_level, e_init, e_min, end_time_1d, fft_method, &
99             galilei_transformation, grid_matching, humidity, &
100             inflow_damping_height, inflow_damping_width, &
101             inflow_disturbance_begin, inflow_disturbance_end, &
102             initializing_actions, km_constant, km_damp_max, lad_surface, &
103             lad_vertical_gradient, lad_vertical_gradient_level, &
104             leaf_surface_concentration, long_filter_factor, &
105             loop_optimization, mixing_length_1d, momentum_advec, &
106             netcdf_precision, nsor_ini, nx, ny, &
107             nz, ocean, omega, outflow_damping_width, overshoot_limit_e, &
108             overshoot_limit_pt, overshoot_limit_u, overshoot_limit_v, &
109             overshoot_limit_w, passive_scalar, pch_index, phi, & 
110             plant_canopy, prandtl_layer, precipitation, pt_reference, &
111             pt_surface, pt_surface_initial_change, pt_vertical_gradient, &
112             pt_vertical_gradient_level, q_surface, q_surface_initial_change, &
113             q_vertical_gradient, q_vertical_gradient_level, radiation, &
114             random_generator, random_heatflux, recycling_width, rif_max, &
115             rif_min, roughness_length, sa_surface, sa_vertical_gradient, &
116             sa_vertical_gradient_level, scalar_advec, &
117             scalar_exchange_coefficient, statistic_regions, &
118             surface_heatflux, surface_pressure, surface_scalarflux, &
119             surface_waterflux, s_surface, s_surface_initial_change, &
120             s_vertical_gradient, s_vertical_gradient_level, timestep_scheme, &
121             topography, topography_grid_convention, top_heatflux, &
122             top_momentumflux_u, top_momentumflux_v, &
123             top_salinityflux, turbulent_inflow, ug_surface, &
124             ug_vertical_gradient, ug_vertical_gradient_level, u_bulk, &
125             ups_limit_e, ups_limit_pt, ups_limit_u, ups_limit_v, ups_limit_w, &
126             use_surface_fluxes, use_top_fluxes, use_ug_for_galilei_tr, &
127             use_upstream_for_tke, vg_surface, vg_vertical_gradient, &
128             vg_vertical_gradient_level, v_bulk, wall_adjustment, wall_heatflux
129
130
131    NAMELIST /d3par/   averaging_interval,  averaging_interval_pr, &
132                       call_psolver_at_all_substeps, cfl_factor, &
133                       create_disturbances, cross_normalized_x, &
134                       cross_normalized_y, cross_profiles, cross_ts_uymax, &
135                       cross_ts_uymin, cross_xtext, cycle_mg, data_output, &
136                       data_output_format, data_output_pr, &
137                       data_output_2d_on_each_pe, disturbance_amplitude, &
138                       disturbance_energy_limit, disturbance_level_b, &
139                       disturbance_level_t, do2d_at_begin, do3d_at_begin, &
140                       do3d_compress, do3d_comp_prec, dt, dt_averaging_input, &
141                       dt_averaging_input_pr, dt_coupling, dt_data_output, &
142                       dt_data_output_av, dt_disturb, dt_dopr, &
143                       dt_dopr_listing, dt_dots, dt_do2d_xy, dt_do2d_xz, &
144                       dt_do2d_yz, dt_do3d, dt_max, dt_restart, dt_run_control,&
145                       end_time, force_print_header, mg_cycles, &
146                       mg_switch_to_pe0_level, netcdf_64bit, netcdf_64bit_3d, &
147                       ngsrb, normalizing_region, npex, npey, nsor, nz_do3d, &
148                       omega_sor, &
149                       prandtl_number, precipitation_amount_interval, &
150                       profile_columns, profile_rows, psolver, &
151                       rayleigh_damping_factor, rayleigh_damping_height, &
152                       residual_limit, restart_time, section_xy, section_xz, &
153                       section_yz, skip_time_data_output, &
154                       skip_time_data_output_av, skip_time_dopr, &
155                       skip_time_do2d_xy, skip_time_do2d_xz, &
156                       skip_time_do2d_yz, skip_time_do3d, &
157                       termination_time_needed, use_prior_plot1d_parameters, &
158                       z_max_do1d, z_max_do1d_normalized, z_max_do2d
159
160
161    NAMELIST /envpar/  host, maximum_cpu_time_allowed, revision, return_addres,&
162                       return_username, run_identifier, tasks_per_node, &
163                       write_binary
164
165!
166!-- Open the NAMELIST-file which is send with this job
167    CALL check_open( 11 )
168
169!
170!-- Read the control parameters for initialization.
171!-- The namelist "inipar" must be provided in the NAMELIST-file. If this is
172!-- not the case and the file contains - instead of "inipar" - any other
173!-- namelist, a read error is created on t3e and control is transferred
174!-- to the statement with label 10. Therefore, on t3e machines one can not
175!-- distinguish between errors produced by a wrong "inipar" namelist or
176!-- because this namelist is totally missing.
177    READ ( 11, inipar, ERR=10, END=11 )
178    GOTO 12
179 10 message_string = 'errors in \$inipar &or no \$inipar-namelist found (CRAY-machines only)'
180    CALL message( 'parin', 'PA0271', 1, 2, 0, 6, 0 )
181
182 11 message_string = 'no \$inipar-namelist found'
183    CALL message( 'parin', 'PA0272', 1, 2, 0, 6, 0 )
184
185!
186!-- If required, read control parameters from restart file (produced by
187!-- a prior run). All PEs are reading from file created by PE0 (see check_open)
188 12 IF ( TRIM( initializing_actions ) == 'read_restart_data' )  THEN
189
190       CALL read_var_list
191!
192!--    The restart file will be reopened when reading the subdomain data
193       CALL close_file( 13 )
194
195!
196!--    Increment the run count
197       runnr = runnr + 1
198
199    ENDIF
200
201!
202!-- Definition of names of areas used for computing statistics. They must
203!-- be defined at this place, because they are allowed to be redefined by
204!-- the user in user_parin.
205    region = 'total domain'
206
207!
208!-- Read runtime parameters given by the user for this run (namelist "d3par").
209!-- The namelist "d3par" can be omitted. In that case, default values are
210!-- used for the parameters.
211    READ ( 11, d3par, END=20 )
212
213!
214!-- Read control parameters for optionally used model software packages
215 20 CALL package_parin
216
217!
218!-- Read user-defined variables
219    CALL user_parin
220
221!
222!-- Check in case of initial run, if the grid point numbers are well defined
223!-- and allocate some arrays which are already needed in init_pegrid or
224!-- check_parameters. During restart jobs, these arrays will be allocated
225!-- in read_var_list. All other arrays are allocated in init_3d_model.
226    IF ( TRIM( initializing_actions ) /= 'read_restart_data' )  THEN
227
228       IF ( nx <= 0 )  THEN
229          WRITE( message_string, * ) 'no value or wrong value given for nx: nx=', nx
230          CALL message( 'parin', 'PA0273', 1, 2, 0, 6, 0 )
231       ENDIF
232       IF ( ny <= 0 )  THEN
233          WRITE( message_string, * ) 'no value or wrong value given for ny: ny=', ny
234          CALL message( 'parin', 'PA0274', 1, 2, 0, 6, 0 )
235       ENDIF
236       IF ( nz <= 0 )  THEN
237          WRITE( message_string, * ) 'no value or wrong value given for nz: nz=', nz
238          CALL message( 'parin', 'PA0275', 1, 2, 0, 6, 0 )
239       ENDIF
240!
241!--    ATTENTION: in case of changes to the following statement please also
242!--    check the allocate statement in routine read_var_list
243       ALLOCATE( lad(0:nz+1),pt_init(0:nz+1), q_init(0:nz+1), sa_init(0:nz+1), &
244                 ug(0:nz+1), u_init(0:nz+1), v_init(0:nz+1), vg(0:nz+1),       &
245                 hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions),        &
246                 hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) )
247       hom = 0.0
248
249    ENDIF
250
251!
252!-- NAMELIST-file is not needed anymore
253    CALL close_file( 11 )
254
255!
256!-- Read values of environment variables (this NAMELIST file is generated by
257!-- mrun)
258    OPEN ( 90, FILE='ENVPAR', STATUS='OLD', FORM='FORMATTED', ERR=30 )
259    READ ( 90, envpar, ERR=31, END=32 )
260    CLOSE ( 90 )
261    RETURN
262
263 30 message_string = 'local file ENVPAR not found' // &
264                     '&some variables for steering may not be properly set'
265    CALL message( 'parin', 'PA0276', 0, 1, 0, 6, 0 )
266    RETURN
267
268 31 message_string = 'errors in local file ENVPAR' // &
269                     '&some variables for steering may not be properly set'
270    CALL message( 'parin', 'PA0277', 0, 1, 0, 6, 0 )
271    RETURN
272
273 32 message_string = 'no envpar-NAMELIST found in local file ENVPAR'  // &
274                     '&some variables for steering may not be properly set'
275    CALL message( 'parin', 'PA0278', 0, 1, 0, 6, 0 )
276
277 END SUBROUTINE parin
Note: See TracBrowser for help on using the repository browser.