source: palm/trunk/SOURCE/parin.f90 @ 1914

Last change on this file since 1914 was 1914, checked in by witha, 5 years ago

Merged branch/forwind into trunk

  • Property svn:keywords set to Id
File size: 23.9 KB
Line 
1!> @file parin.f90
2!--------------------------------------------------------------------------------!
3! This file is part of PALM.
4!
5! PALM is free software: you can redistribute it and/or modify it under the terms
6! of the GNU General Public License as published by the Free Software Foundation,
7! either version 3 of the License, or (at your option) any later version.
8!
9! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
10! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
11! A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
12!
13! You should have received a copy of the GNU General Public License along with
14! PALM. If not, see <http://www.gnu.org/licenses/>.
15!
16! Copyright 1997-2016 Leibniz Universitaet Hannover
17!--------------------------------------------------------------------------------!
18!
19! Current revisions:
20! -----------------
21!
22!
23! Former revisions:
24! -----------------
25! $Id: parin.f90 1914 2016-05-26 14:44:07Z witha $
26!
27! 1849 2016-04-08 11:33:18Z hoffmann
28! Adapted for modularization of microphysics
29!
30! 1839 2016-04-07 18:48:14Z witha
31! Added call to wind turbine model for reading of &wind_turbine_par
32!
33! 1833 2016-04-07 14:23:03Z raasch
34! call of spectra_parin
35!
36! 1831 2016-04-07 13:15:51Z hoffmann
37! turbulence renamed collision_turbulence, drizzle renamed
38! cloud_water_sedimentation
39! curvature_solution_effects removed
40!
41! 1826 2016-04-07 12:01:39Z maronga
42! Added call to radiation model for reading of &radiation_par.
43! Added call to plant canopy model for reading of &canopy_par.
44!
45! 1817 2016-04-06 15:44:20Z maronga
46! Added call to land surface model for reading of &lsm_par
47!
48! 1804 2016-04-05 16:30:18Z maronga
49! Removed code for parameter file check (__check)
50!
51! 1783 2016-03-06 18:36:17Z raasch
52! +netcdf_deflate in d3par, netcdf module and variable names changed
53!
54! 1764 2016-02-28 12:45:19Z raasch
55! cpp-statements for nesting removed, explicit settings of boundary conditions
56! in nest domains,
57! bugfix: npex/npey message moved from inipar to d3par
58! bugfix: check of lateral boundary conditions from check_parameters to here,
59! because they will be already used in init_pegrid and init_grid
60!
61! 1762 2016-02-25 12:31:13Z hellstea
62! Introduction of nested domain feature
63!
64! 1691 2015-10-26 16:17:44Z maronga
65! Added parameter most_method. Renamed prandtl_layer to constant_flux_layer.
66!
67! 1682 2015-10-07 23:56:08Z knoop
68! Code annotations made doxygen readable
69!
70! 1560 2015-03-06 10:48:54Z keck
71! +recycling_yshift
72!
73! 1496 2014-12-02 17:25:50Z maronga
74! Renamed: "radiation -> "cloud_top_radiation"
75!
76! 1484 2014-10-21 10:53:05Z kanani
77! Changes due to new module structure of the plant canopy model:
78!   canopy-model related parameters moved to new package canopy_par in
79!   subroutine package_parin
80!
81! 1429 2014-07-15 12:53:45Z knoop
82! +ensemble_member_nr to prepare the random_generator for ensemble runs
83!
84! 1402 2014-05-09 14:25:13Z raasch
85! location messages modified, batch_job included in envpar-NAMELIST
86!
87! 1384 2014-05-02 14:31:06Z raasch
88! location messages added
89!
90! 1365 2014-04-22 15:03:56Z boeske
91! Usage of large scale forcing enabled:
92! +use_subsidence_tendencies
93!
94! 1361 2014-04-16 15:17:48Z hoffmann
95! +call_microphysics_at_all_substeps
96!
97! 1359 2014-04-11 17:15:14Z hoffmann
98! REAL constants provided with KIND-attribute
99!
100! 1353 2014-04-08 15:21:23Z heinze
101! REAL constants provided with KIND-attribute
102!
103! 1327 2014-03-21 11:00:16Z raasch
104! -data_output_format, do3d_compress, do3d_comp_prec
105!
106! 1320 2014-03-20 08:40:49Z raasch
107! ONLY-attribute added to USE-statements,
108! kind-parameters added to all INTEGER and REAL declaration statements,
109! kinds are defined in new module kinds,
110! old module precision_kind is removed,
111! revision history before 2012 removed,
112! comment fields (!:) to be used for variable explanations added to
113! all variable declaration statements
114!
115! 1318 2014-03-17 13:35:16Z raasch
116! +cpu_log_barrierwait in d3par
117!
118! 1301 2014-03-06 13:29:46Z heinze
119! +large_scale_subsidence
120!
121! 1241 2013-10-30 11:36:58Z heinze
122! +nudging
123! +large_scale_forcing
124!
125! 1216 2013-08-26 09:31:42Z raasch
126! +transpose_compute_overlap in inipar
127!
128! 1195 2013-07-01 12:27:57Z heinze
129! Bugfix: allocate ref_state
130!
131! 1179 2013-06-14 05:57:58Z raasch
132! +reference_state in inipar
133!
134! 1159 2013-05-21 11:58:22Z fricke
135! +use_cmax
136!
137! 1128 2013-04-12 06:19:32Z raasch
138! +background_communication in inipar
139!
140! 1115 2013-03-26 18:16:16Z hoffmann
141! unused variables removed
142!
143! 1092 2013-02-02 11:24:22Z raasch
144! unused variables removed
145!
146! 1065 2012-11-22 17:42:36Z hoffmann
147! +nc, c_sedimentation, limiter_sedimentation, turbulence
148! -mu_constant, mu_constant_value
149!
150! 1053 2012-11-13 17:11:03Z hoffmann
151! necessary expansions according to the two new prognostic equations (nr, qr)
152! of the two-moment cloud physics scheme and steering parameters:
153! +*_init, *_surface, *_surface_initial_change, *_vertical_gradient,
154! +*_vertical_gradient_level, surface_waterflux_*,
155! +cloud_scheme, drizzle, mu_constant, mu_constant_value, ventilation_effect
156!
157! 1036 2012-10-22 13:43:42Z raasch
158! code put under GPL (PALM 3.9)
159!
160! 1015 2012-09-27 09:23:24Z raasch
161! -adjust_mixing_length
162!
163! 1003 2012-09-14 14:35:53Z raasch
164! -grid_matching
165!
166! 1001 2012-09-13 14:08:46Z raasch
167! -cut_spline_overshoot, long_filter_factor, overshoot_limit_*, ups_limit_*
168!
169! 996 2012-09-07 10:41:47Z raasch
170! -use_prior_plot1d_parameters
171!
172! 978 2012-08-09 08:28:32Z fricke
173! -km_damp_max, outflow_damping_width
174! +pt_damping_factor, pt_damping_width
175! +z0h_factor
176!
177! 964 2012-07-26 09:14:24Z raasch
178! -cross_normalized_x, cross_normalized_y, cross_xtext, z_max_do1d,
179! z_max_do1d_normalized
180!
181! 940 2012-07-09 14:31:00Z raasch
182! +neutral in inipar
183!
184! 927 2012-06-06 19:15:04Z raasch
185! +masking_method in inipar
186!
187! 824 2012-02-17 09:09:57Z raasch
188! +curvature_solution_effects in inipar
189!
190! 809 2012-01-30 13:32:58Z maronga
191! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
192!
193! 807 2012-01-25 11:53:51Z maronga
194! New cpp directive "__check" implemented which is used by check_namelist_files
195!
196! Revision 1.1  1997/07/24 11:22:50  raasch
197! Initial revision
198!
199!
200! Description:
201! ------------
202!> This subroutine reads variables controling the run from the NAMELIST files
203!------------------------------------------------------------------------------!
204 SUBROUTINE parin
205 
206
207    USE arrays_3d,                                                             &
208        ONLY:  pt_init, q_init, ref_state, sa_init, ug, u_init, v_init,        &
209               vg
210
211    USE plant_canopy_model_mod,                                                &
212         ONLY: pcm_parin 
213
214    USE control_parameters
215
216    USE cpulog,                                                                &
217        ONLY:  cpu_log_barrierwait
218
219    USE dvrp_variables,                                                        &
220        ONLY:  local_dvrserver_running
221
222    USE grid_variables,                                                        &
223        ONLY:  dx, dy
224
225    USE indices,                                                               &
226        ONLY:  nx, ny, nz
227
228    USE kinds
229
230    USE land_surface_model_mod,                                                &
231        ONLY: lsm_parin
232
233    USE microphysics_mod,                                                      &
234        ONLY:  c_sedimentation, cloud_water_sedimentation,                     &
235               collision_turbulence, limiter_sedimentation, nc_const,          &
236               ventilation_effect
237
238    USE model_1d,                                                              &
239        ONLY:  damp_level_1d, dt_pr_1d, dt_run_control_1d, end_time_1d
240
241    USE pegrid
242
243    USE netcdf_interface,                                                      &
244        ONLY:  netcdf_data_format, netcdf_deflate, netcdf_precision
245
246    USE pmc_interface,                                                         &
247        ONLY:  nested_run
248
249    USE profil_parameter,                                                      &
250        ONLY:  cross_profiles, cross_ts_uymax, cross_ts_uymin,                 &
251               profile_columns, profile_rows
252
253    USE progress_bar,                                                          &
254        ONLY :  batch_job
255
256    USE radiation_model_mod,                                                   &
257        ONLY: radiation_parin 
258
259    USE spectra_mod,                                                           &
260        ONLY :  spectra_parin
261
262    USE statistics,                                                            &
263        ONLY:  hom, hom_sum, pr_palm, region, statistic_regions
264
265    USE wind_turbine_model_mod,                                                &
266        ONLY:  wtm_parin
267
268
269    IMPLICIT NONE
270
271    INTEGER(iwp) ::  i   !<
272
273
274    NAMELIST /inipar/  alpha_surface, background_communication, bc_e_b, bc_lr, &
275                       bc_ns, bc_p_b, bc_p_t, bc_pt_b, bc_pt_t, bc_q_b,        &
276             bc_q_t,bc_s_b, bc_s_t, bc_sa_t, bc_uv_b, bc_uv_t,                 &
277             bottom_salinityflux, building_height, building_length_x,          &
278             building_length_y, building_wall_left, building_wall_south,       &
279             call_psolver_at_all_substeps, call_microphysics_at_all_substeps,  &
280             canyon_height,                                                    &
281             canyon_width_x, canyon_width_y, canyon_wall_left,                 &
282             canyon_wall_south, c_sedimentation, cfl_factor, cloud_droplets,   &
283             cloud_physics, cloud_scheme, cloud_top_radiation,                 &
284             cloud_water_sedimentation,                                        &
285             collective_wait, collision_turbulence, conserve_volume_flow,      &
286             conserve_volume_flow_mode, constant_flux_layer,                   &
287             coupling_start_time,                                              &
288             cycle_mg, damp_level_1d,                                          &
289             dissipation_1d,                                                   &
290             dp_external, dp_level_b, dp_smooth, dpdxy,                        &
291             dt, dt_pr_1d, dt_run_control_1d, dx, dy, dz, dz_max,              &
292             dz_stretch_factor, dz_stretch_level, end_time_1d,                 &
293             ensemble_member_nr,                                               &
294             e_init, e_min, fft_method, galilei_transformation, humidity,      &
295             inflow_damping_height, inflow_damping_width,                      &
296             inflow_disturbance_begin, inflow_disturbance_end,                 &
297             initializing_actions, km_constant,                                &
298             large_scale_forcing, large_scale_subsidence,                      &
299             limiter_sedimentation,                                            &
300             loop_optimization, masking_method, mg_cycles,                     &
301             mg_switch_to_pe0_level, mixing_length_1d, momentum_advec,         &
302             most_method, nc_const, netcdf_precision, neutral, ngsrb,          &
303             nsor, nsor_ini, nudging, nx, ny, nz, ocean, omega, omega_sor,     &
304             passive_scalar, phi,                                              &
305             prandtl_number, precipitation, psolver, pt_damping_factor,        &
306             pt_damping_width, pt_reference, pt_surface,                       &
307             pt_surface_initial_change, pt_vertical_gradient,                  &
308             pt_vertical_gradient_level, q_surface, q_surface_initial_change,  &
309             q_vertical_gradient, q_vertical_gradient_level,                   &
310             random_generator, random_heatflux,                                &
311             rayleigh_damping_factor, rayleigh_damping_height,                 &
312             recycling_width, recycling_yshift,                                &
313             reference_state, residual_limit,                                  &
314             roughness_length, sa_surface,                                     &
315             sa_vertical_gradient, sa_vertical_gradient_level, scalar_advec,   &
316             scalar_rayleigh_damping,                                          &
317             statistic_regions, subs_vertical_gradient,                        &
318             subs_vertical_gradient_level, surface_heatflux, surface_pressure, &
319             surface_scalarflux, surface_waterflux,                            &
320             s_surface, s_surface_initial_change, s_vertical_gradient,         &
321             s_vertical_gradient_level, timestep_scheme,                       &
322             topography, topography_grid_convention, top_heatflux,             &
323             top_momentumflux_u, top_momentumflux_v, top_salinityflux,         &
324             transpose_compute_overlap, turbulent_inflow,                      &
325             use_subsidence_tendencies, ug_surface, ug_vertical_gradient,      &
326             ug_vertical_gradient_level, use_surface_fluxes, use_cmax,         &
327             use_top_fluxes, use_ug_for_galilei_tr, use_upstream_for_tke,      &
328             uv_heights, u_bulk, u_profile, vg_surface, vg_vertical_gradient,  &
329             vg_vertical_gradient_level, v_bulk, v_profile, ventilation_effect,&
330             wall_adjustment, wall_heatflux, wall_humidityflux,                &
331             wall_scalarflux, zeta_max, zeta_min, z0h_factor
332     
333    NAMELIST /d3par/  averaging_interval, averaging_interval_pr,               &
334             cpu_log_barrierwait, create_disturbances,                         &
335             cross_profiles, cross_ts_uymax, cross_ts_uymin,                   &
336             data_output, data_output_masks,                                   &
337             data_output_pr, data_output_2d_on_each_pe, disturbance_amplitude, &
338             disturbance_energy_limit, disturbance_level_b,                    &
339             disturbance_level_t, do2d_at_begin, do3d_at_begin,                &
340             dt, dt_averaging_input, dt_averaging_input_pr,                    &
341             dt_coupling, dt_data_output, dt_data_output_av, dt_disturb,       &
342             dt_domask, dt_dopr, dt_dopr_listing, dt_dots, dt_do2d_xy,         &
343             dt_do2d_xz, dt_do2d_yz, dt_do3d, dt_max, dt_restart,              &
344             dt_run_control,end_time, force_print_header, mask_scale_x,        &
345             mask_scale_y, mask_scale_z, mask_x, mask_y, mask_z, mask_x_loop,  &
346             mask_y_loop, mask_z_loop, netcdf_data_format, netcdf_deflate,     &
347             normalizing_region, npex, npey, nz_do3d,                          &
348             precipitation_amount_interval, profile_columns, profile_rows,     &
349             restart_time, section_xy, section_xz, section_yz,                 &
350             skip_time_data_output, skip_time_data_output_av, skip_time_dopr,  &
351             skip_time_do2d_xy, skip_time_do2d_xz, skip_time_do2d_yz,          &
352             skip_time_do3d, skip_time_domask, synchronous_exchange,           &
353             termination_time_needed, z_max_do2d
354
355
356    NAMELIST /envpar/  batch_job, host, local_dvrserver_running,               &
357                       maximum_cpu_time_allowed, maximum_parallel_io_streams,  &
358                       revision, return_addres, return_username,               &
359                       run_identifier, tasks_per_node, write_binary
360
361!
362!-- First read values of environment variables (this NAMELIST file is
363!-- generated by mrun)
364    CALL location_message( 'reading environment parameters from ENVPAR', .FALSE. )
365    OPEN ( 90, FILE='ENVPAR', STATUS='OLD', FORM='FORMATTED', ERR=30 )
366    READ ( 90, envpar, ERR=31, END=32 )
367    CLOSE ( 90 )
368    CALL location_message( 'finished', .TRUE. )
369
370!
371!-- Calculate the number of groups into which parallel I/O is split.
372!-- The default for files which are opened by all PEs (or where each
373!-- PE opens his own independent file) is, that all PEs are doing input/output
374!-- in parallel at the same time. This might cause performance or even more
375!-- severe problems depending on the configuration of the underlying file
376!-- system.
377!-- First, set the default:
378    IF ( maximum_parallel_io_streams == -1  .OR.                               &
379         maximum_parallel_io_streams > numprocs )  THEN
380       maximum_parallel_io_streams = numprocs
381    ENDIF
382!
383!-- Now calculate the number of io_blocks and the io_group to which the
384!-- respective PE belongs. I/O of the groups is done in serial, but in parallel
385!-- for all PEs belonging to the same group.
386!-- These settings are repeated in init_pegrid for the communicator comm2d,
387!-- which is not available here
388    io_blocks = numprocs / maximum_parallel_io_streams
389    io_group  = MOD( myid+1, io_blocks )
390
391    CALL location_message( 'reading NAMELIST parameters from PARIN', .FALSE. )
392!
393!-- Data is read in parallel by groups of PEs
394    DO  i = 0, io_blocks-1
395       IF ( i == io_group )  THEN
396
397!
398!--       Open the NAMELIST-file which is send with this job
399          CALL check_open( 11 )
400
401!
402!--       Read the control parameters for initialization.
403!--       The namelist "inipar" must be provided in the NAMELIST-file.
404          READ ( 11, inipar, ERR=10, END=11 )
405
406          GOTO 12
407
408 10       message_string = 'errors in \$inipar &or no \$inipar-namelist ' //   &
409                           'found (CRAY-machines only)'
410          CALL message( 'parin', 'PA0271', 1, 2, 0, 6, 0 )
411
412 11       message_string = 'no \$inipar-namelist found'
413          CALL message( 'parin', 'PA0272', 1, 2, 0, 6, 0 )
414
415!
416!--       If required, read control parameters from restart file (produced by
417!--       a prior run). All PEs are reading from file created by PE0 (see
418!--       check_open)
419 12       IF ( TRIM( initializing_actions ) == 'read_restart_data' )  THEN
420             CALL read_var_list
421!
422!--          The restart file will be reopened when reading the subdomain data
423             CALL close_file( 13 )
424
425!
426!--          Increment the run count
427             runnr = runnr + 1
428          ENDIF
429
430!
431!--       In case of nested runs, explicitly set nesting boundary conditions
432!--       except for the root domain. This will overwrite the user settings.
433          IF ( nest_domain )  THEN
434             bc_lr   = 'nested'
435             bc_ns   = 'nested'
436             bc_uv_t = 'nested'
437             bc_pt_t = 'nested'
438             bc_q_t  = 'nested'
439             bc_p_t  = 'neumann'
440          ENDIF
441!
442!--       Check validity of lateral boundary conditions. This has to be done
443!--       here because they are already used in init_pegrid and init_grid and
444!--       therefore cannot be check in check_parameters
445          IF ( bc_lr /= 'cyclic'  .AND.  bc_lr /= 'dirichlet/radiation'  .AND. &
446               bc_lr /= 'radiation/dirichlet'  .AND.  bc_lr /= 'nested' )  THEN
447             message_string = 'unknown boundary condition: bc_lr = "' // &
448                              TRIM( bc_lr ) // '"'
449             CALL message( 'check_parameters', 'PA0049', 1, 2, 0, 6, 0 )
450          ENDIF
451          IF ( bc_ns /= 'cyclic'  .AND.  bc_ns /= 'dirichlet/radiation'  .AND. &
452               bc_ns /= 'radiation/dirichlet'  .AND.  bc_ns /= 'nested' )  THEN
453             message_string = 'unknown boundary condition: bc_ns = "' // &
454                              TRIM( bc_ns ) // '"'
455             CALL message( 'check_parameters', 'PA0050', 1, 2, 0, 6, 0 )
456          ENDIF
457
458!
459!--       Set internal variables used for speed optimization in if clauses
460          IF ( bc_lr /= 'cyclic' )               bc_lr_cyc    = .FALSE.
461          IF ( bc_lr == 'dirichlet/radiation' )  bc_lr_dirrad = .TRUE.
462          IF ( bc_lr == 'radiation/dirichlet' )  bc_lr_raddir = .TRUE.
463          IF ( bc_ns /= 'cyclic' )               bc_ns_cyc    = .FALSE.
464          IF ( bc_ns == 'dirichlet/radiation' )  bc_ns_dirrad = .TRUE.
465          IF ( bc_ns == 'radiation/dirichlet' )  bc_ns_raddir = .TRUE.
466
467!
468!--       Definition of names of areas used for computing statistics. They must
469!--       be defined at this place, because they are allowed to be redefined by
470!--       the user in user_parin.
471          region = 'total domain'
472
473!
474!--       Read runtime parameters given by the user for this run (namelist
475!--       "d3par"). The namelist "d3par" can be omitted. In that case, default
476!--       values are used for the parameters.
477          READ ( 11, d3par, END=20 )
478
479          IF ( nested_run )  THEN
480!
481!--          In nested domains, npex or npey can not be given in the d3par-
482!--          NAMELIST because here the PE-grids are always defined in the
483!--          nestpar-NAMELIST. Settings will be ignored.
484             IF ( ( npex /= -1 ) .OR. ( npey /= -1 ) )  THEN
485                message_string = 'npex or npey can not be given in \$d3par ' // &
486                                 'for nested runs & they will be ignored'
487                CALL message( 'parin', 'PA0352', 0, 1, 0, 6, 0 )
488             ENDIF
489          ENDIF
490
491!
492!--       Check if land surface model is used and read &lsm_par if required
493          CALL lsm_parin
494
495!
496!--       Check if spectra shall be calculated and read spectra_par if required
497          CALL spectra_parin
498
499!
500!--       Check if radiation model is used and read &radiation_par if required
501          CALL radiation_parin
502 
503 
504!--       Check if plant canopy model is used and read &canopy_par if required
505          CALL pcm_parin
506 
507!
508!--       Read control parameters for optionally used model software packages
509 20       CALL package_parin
510
511!
512!--       Check if wind turbine model is used and read &wind_turbine_par if
513!--       required
514          CALL wtm_parin
515
516!
517!--       Read user-defined variables
518          CALL user_parin
519
520!
521!--       Check in case of initial run, if the grid point numbers are well
522!--       defined and allocate some arrays which are already needed in
523!--       init_pegrid or check_parameters. During restart jobs, these arrays
524!--       will be allocated in read_var_list. All other arrays are allocated
525!--       in init_3d_model.
526          IF ( TRIM( initializing_actions ) /= 'read_restart_data' )  THEN
527
528             IF ( nx <= 0 )  THEN
529                WRITE( message_string, * ) 'no value or wrong value given',    &
530                                           ' for nx: nx=', nx
531                CALL message( 'parin', 'PA0273', 1, 2, 0, 6, 0 )
532             ENDIF
533             IF ( ny <= 0 )  THEN
534                WRITE( message_string, * ) 'no value or wrong value given',    &
535                                           ' for ny: ny=', ny
536                CALL message( 'parin', 'PA0274', 1, 2, 0, 6, 0 )
537             ENDIF
538             IF ( nz <= 0 )  THEN
539                WRITE( message_string, * ) 'no value or wrong value given',    &
540                                           ' for nz: nz=', nz
541                CALL message( 'parin', 'PA0275', 1, 2, 0, 6, 0 )
542             ENDIF
543!
544!--          ATTENTION: in case of changes to the following statement please
545!--                  also check the allocate statement in routine read_var_list
546             ALLOCATE( pt_init(0:nz+1), q_init(0:nz+1),                       &
547                       ref_state(0:nz+1), sa_init(0:nz+1), ug(0:nz+1),         &
548                       u_init(0:nz+1), v_init(0:nz+1), vg(0:nz+1),             &
549                       hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions),  &
550                       hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) )
551
552             hom = 0.0_wp
553
554          ENDIF
555
556!
557!--       NAMELIST-file is not needed anymore
558          CALL close_file( 11 )
559
560       ENDIF
561#if defined( __parallel )
562       CALL MPI_BARRIER( MPI_COMM_WORLD, ierr )
563#endif
564    ENDDO
565
566    CALL location_message( 'finished', .TRUE. )
567
568    RETURN
569
570 30 message_string = 'local file ENVPAR not found' //                          &
571                     '&some variables for steering may not be properly set'
572    CALL message( 'parin', 'PA0276', 0, 1, 0, 6, 0 )
573    RETURN
574
575 31 message_string = 'errors in local file ENVPAR' //                          &
576                     '&some variables for steering may not be properly set'
577    CALL message( 'parin', 'PA0277', 0, 1, 0, 6, 0 )
578    RETURN
579
580 32 message_string = 'no envpar-NAMELIST found in local file ENVPAR'  //       &
581                     '&some variables for steering may not be properly set'
582    CALL message( 'parin', 'PA0278', 0, 1, 0, 6, 0 )
583
584 END SUBROUTINE parin
Note: See TracBrowser for help on using the repository browser.