1 | SUBROUTINE parin |
---|
2 | |
---|
3 | !--------------------------------------------------------------------------------! |
---|
4 | ! This file is part of PALM. |
---|
5 | ! |
---|
6 | ! PALM is free software: you can redistribute it and/or modify it under the terms |
---|
7 | ! of the GNU General Public License as published by the Free Software Foundation, |
---|
8 | ! either version 3 of the License, or (at your option) any later version. |
---|
9 | ! |
---|
10 | ! PALM is distributed in the hope that it will be useful, but WITHOUT ANY |
---|
11 | ! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR |
---|
12 | ! A PARTICULAR PURPOSE. See the GNU General Public License for more details. |
---|
13 | ! |
---|
14 | ! You should have received a copy of the GNU General Public License along with |
---|
15 | ! PALM. If not, see <http://www.gnu.org/licenses/>. |
---|
16 | ! |
---|
17 | ! Copyright 1997-2012 Leibniz University Hannover |
---|
18 | !--------------------------------------------------------------------------------! |
---|
19 | ! |
---|
20 | ! Current revisions: |
---|
21 | ! ----------------- |
---|
22 | ! unused variables removed |
---|
23 | ! |
---|
24 | ! Former revisions: |
---|
25 | ! ----------------- |
---|
26 | ! $Id: parin.f90 1115 2013-03-26 18:16:16Z hoffmann $ |
---|
27 | ! |
---|
28 | ! 1092 2013-02-02 11:24:22Z raasch |
---|
29 | ! unused variables removed |
---|
30 | ! |
---|
31 | ! 1065 2012-11-22 17:42:36Z hoffmann |
---|
32 | ! +nc, c_sedimentation, limiter_sedimentation, turbulence |
---|
33 | ! -mu_constant, mu_constant_value |
---|
34 | ! |
---|
35 | ! 1053 2012-11-13 17:11:03Z hoffmann |
---|
36 | ! necessary expansions according to the two new prognostic equations (nr, qr) |
---|
37 | ! of the two-moment cloud physics scheme and steering parameters: |
---|
38 | ! +*_init, *_surface, *_surface_initial_change, *_vertical_gradient, |
---|
39 | ! +*_vertical_gradient_level, surface_waterflux_*, |
---|
40 | ! +cloud_scheme, drizzle, mu_constant, mu_constant_value, ventilation_effect |
---|
41 | ! |
---|
42 | ! 1036 2012-10-22 13:43:42Z raasch |
---|
43 | ! code put under GPL (PALM 3.9) |
---|
44 | ! |
---|
45 | ! 1015 2012-09-27 09:23:24Z raasch |
---|
46 | ! -adjust_mixing_length |
---|
47 | ! |
---|
48 | ! 1003 2012-09-14 14:35:53Z raasch |
---|
49 | ! -grid_matching |
---|
50 | ! |
---|
51 | ! 1001 2012-09-13 14:08:46Z raasch |
---|
52 | ! -cut_spline_overshoot, long_filter_factor, overshoot_limit_*, ups_limit_* |
---|
53 | ! |
---|
54 | ! 996 2012-09-07 10:41:47Z raasch |
---|
55 | ! -use_prior_plot1d_parameters |
---|
56 | ! |
---|
57 | ! 978 2012-08-09 08:28:32Z fricke |
---|
58 | ! -km_damp_max, outflow_damping_width |
---|
59 | ! +pt_damping_factor, pt_damping_width |
---|
60 | ! +z0h_factor |
---|
61 | ! |
---|
62 | ! 964 2012-07-26 09:14:24Z raasch |
---|
63 | ! -cross_normalized_x, cross_normalized_y, cross_xtext, z_max_do1d, |
---|
64 | ! z_max_do1d_normalized |
---|
65 | ! |
---|
66 | ! 940 2012-07-09 14:31:00Z raasch |
---|
67 | ! +neutral in inipar |
---|
68 | ! |
---|
69 | ! 927 2012-06-06 19:15:04Z raasch |
---|
70 | ! +masking_method in inipar |
---|
71 | ! |
---|
72 | ! 824 2012-02-17 09:09:57Z raasch |
---|
73 | ! +curvature_solution_effects in inipar |
---|
74 | ! |
---|
75 | ! 809 2012-01-30 13:32:58Z maronga |
---|
76 | ! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives |
---|
77 | ! |
---|
78 | ! 807 2012-01-25 11:53:51Z maronga |
---|
79 | ! New cpp directive "__check" implemented which is used by check_namelist_files |
---|
80 | ! |
---|
81 | ! 785 2011-11-28 09:47:19Z raasch |
---|
82 | ! +scalar_rayleigh_damping in inipar |
---|
83 | ! |
---|
84 | ! 767 2011-10-14 06:39:12Z raasch |
---|
85 | ! +u_profile, v_profile, uv_heights in inipar |
---|
86 | ! |
---|
87 | ! 759 2011-09-15 13:58:31Z raasch |
---|
88 | ! +maximum_parallel_io_streams in envpar, |
---|
89 | ! splitting of parallel I/O in blocks of PEs |
---|
90 | ! |
---|
91 | ! 683 2011-02-09 14:25:15Z raasch |
---|
92 | ! +synchronous_exchange in d3par |
---|
93 | ! |
---|
94 | ! 667 2010-12-23 12:06:00Z suehring/gryschka |
---|
95 | ! Steering parameter dissipation_control added in inipar. (commented out) |
---|
96 | ! |
---|
97 | ! 622 2010-12-10 08:08:13Z raasch |
---|
98 | ! +collective_wait in inipar |
---|
99 | ! |
---|
100 | ! 600 2010-11-24 16:10:51Z raasch |
---|
101 | ! parameters moved from d3par to inipar: call_psolver_at_all_substeps, |
---|
102 | ! cfl_factor, cycle_mg, mg_cycles, mg_switch_to_pe0_level, ngsrb, nsor, |
---|
103 | ! omega_sor, prandtl_number, psolver, rayleigh_damping_factor, |
---|
104 | ! rayleigh_damping_height, residual_limit |
---|
105 | ! |
---|
106 | ! 580 2010-10-05 13:59:11Z heinze |
---|
107 | ! Renaming of ws_vertical_gradient to subs_vertical_gradient and |
---|
108 | ! ws_vertical_gradient_level to subs_vertical_gradient_level |
---|
109 | ! |
---|
110 | ! 553 2010-09-01 14:09:06Z weinreis |
---|
111 | ! parameters for masked output are replaced by arrays |
---|
112 | ! |
---|
113 | ! 493 2010-03-01 08:30:24Z raasch |
---|
114 | ! +netcdf_data_format in d3par, -netcdf_64bit, -netcdf_64bit_3d |
---|
115 | ! |
---|
116 | ! 449 2010-02-02 11:23:59Z raasch |
---|
117 | ! +wall_humidityflux, wall_scalarflux |
---|
118 | ! +ws_vertical_gradient, ws_vertical_gradient_level |
---|
119 | ! |
---|
120 | ! 410 2009-12-04 17:05:40Z letzel |
---|
121 | ! masked data output: + dt_domask, mask_01~20_x|y|z, mask_01~20_x|y|z_loop, |
---|
122 | ! mask_scale_x|y|z, masks, skip_time_domask |
---|
123 | ! |
---|
124 | ! 291 2009-04-16 12:07:26Z raasch |
---|
125 | ! +local_dvrserver_running in envpar |
---|
126 | ! Output of messages replaced by message handling routine. |
---|
127 | ! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left, |
---|
128 | ! canyon_wall_south, conserve_volume_flow_mode, coupling_start_time, |
---|
129 | ! dp_external, dp_level_b, dp_smooth, dpdxy, u_bulk, v_bulk in inipar |
---|
130 | ! topography_grid_convention moved from userpar |
---|
131 | ! |
---|
132 | ! 197 2008-09-16 15:29:03Z raasch |
---|
133 | ! +cthf,leaf_surface_concentration, scalar_exchange_coefficient |
---|
134 | ! +inflow_damping_height, inflow_damping_width, recycling_width, |
---|
135 | ! turbulent_inflow in inipar, -skip_time_dosp in d3par, |
---|
136 | ! allocation of hom_sum moved from init_3d_model to here, |
---|
137 | ! npex, npey moved from inipar to d3par, setting of myid_char_14 removed, |
---|
138 | ! lad is allways allocated |
---|
139 | ! |
---|
140 | ! 138 2007-11-28 10:03:58Z letzel |
---|
141 | ! +canopy_mode, drag_coefficient, lad_surface, lad_vertical_gradient, |
---|
142 | ! lad_vertical_gradient_level, pch_index, plant_canopy, |
---|
143 | ! +allocation of leaf area density field |
---|
144 | ! |
---|
145 | ! 108 2007-08-24 15:10:38Z letzel |
---|
146 | ! +e_init, top_momentumflux_u|v in inipar, +dt_coupling in d3par |
---|
147 | ! |
---|
148 | ! 95 2007-06-02 16:48:38Z raasch |
---|
149 | ! +bc_sa_t, bottom_salinityflux, ocean, sa_surface, sa_vertical_gradient, |
---|
150 | ! sa_vertical_gradient_level, top_salinityflux in inipar, |
---|
151 | ! sa_init is allocated |
---|
152 | ! |
---|
153 | ! 87 2007-05-22 15:46:47Z raasch |
---|
154 | ! Size of hom increased by the maximum number of user-defined profiles, |
---|
155 | ! var_hom renamed pr_palm |
---|
156 | ! |
---|
157 | ! 82 2007-04-16 15:40:52Z raasch |
---|
158 | ! +return_addres, return_username in envpar |
---|
159 | ! |
---|
160 | ! 75 2007-03-22 09:54:05Z raasch |
---|
161 | ! +dt_max, netcdf_64bit_3d, precipitation_amount_interval in d3par, |
---|
162 | ! +loop_optimization, pt_reference in inipar, -data_output_ts, |
---|
163 | ! moisture renamed humidity |
---|
164 | ! |
---|
165 | ! 20 2007-02-26 00:12:32Z raasch |
---|
166 | ! +top_heatflux, use_top_fluxes in inipar |
---|
167 | ! |
---|
168 | ! 3 2007-02-13 11:30:58Z raasch |
---|
169 | ! +netcdf_64bit_3d in d3par, |
---|
170 | ! RCS Log replace by Id keyword, revision history cleaned up |
---|
171 | ! |
---|
172 | ! Revision 1.57 2007/02/11 13:11:22 raasch |
---|
173 | ! Values of environment variables are now read from file ENVPAR instead of |
---|
174 | ! reading them with a system call, + NAMELIST envpar |
---|
175 | ! |
---|
176 | ! Revision 1.1 1997/07/24 11:22:50 raasch |
---|
177 | ! Initial revision |
---|
178 | ! |
---|
179 | ! |
---|
180 | ! Description: |
---|
181 | ! ------------ |
---|
182 | ! This subroutine reads variables controling the run from the NAMELIST files |
---|
183 | !------------------------------------------------------------------------------! |
---|
184 | |
---|
185 | USE arrays_3d |
---|
186 | USE averaging |
---|
187 | USE cloud_parameters |
---|
188 | USE control_parameters |
---|
189 | USE dvrp_variables |
---|
190 | USE grid_variables |
---|
191 | USE indices |
---|
192 | USE model_1d |
---|
193 | USE pegrid |
---|
194 | USE profil_parameter |
---|
195 | USE statistics |
---|
196 | |
---|
197 | IMPLICIT NONE |
---|
198 | |
---|
199 | INTEGER :: i |
---|
200 | |
---|
201 | |
---|
202 | NAMELIST /inipar/ alpha_surface, bc_e_b, bc_lr, & |
---|
203 | bc_ns, bc_p_b, bc_p_t, bc_pt_b, bc_pt_t, bc_q_b, & |
---|
204 | bc_q_t,bc_s_b, bc_s_t, bc_sa_t, bc_uv_b, bc_uv_t, & |
---|
205 | bottom_salinityflux, building_height, building_length_x, & |
---|
206 | building_length_y, building_wall_left, building_wall_south, & |
---|
207 | call_psolver_at_all_substeps, canopy_mode, canyon_height, & |
---|
208 | canyon_width_x, canyon_width_y, canyon_wall_left, & |
---|
209 | canyon_wall_south, c_sedimentation, cfl_factor, cloud_droplets, & |
---|
210 | cloud_physics, cloud_scheme, collective_wait, & |
---|
211 | conserve_volume_flow, & |
---|
212 | conserve_volume_flow_mode, coupling_start_time, cthf, & |
---|
213 | curvature_solution_effects, cycle_mg, damp_level_1d, & |
---|
214 | dissipation_1d, & !dissipation_control, & |
---|
215 | dp_external, dp_level_b, dp_smooth, dpdxy, drag_coefficient, & |
---|
216 | drizzle, dt, dt_pr_1d, dt_run_control_1d, dx, dy, dz, dz_max, & |
---|
217 | dz_stretch_factor, dz_stretch_level, e_init, e_min, end_time_1d, & |
---|
218 | fft_method, galilei_transformation, humidity, & |
---|
219 | inflow_damping_height, inflow_damping_width, & |
---|
220 | inflow_disturbance_begin, inflow_disturbance_end, & |
---|
221 | initializing_actions, km_constant, lad_surface, & |
---|
222 | lad_vertical_gradient, lad_vertical_gradient_level, & |
---|
223 | leaf_surface_concentration, limiter_sedimentation, & |
---|
224 | loop_optimization, masking_method, mg_cycles, & |
---|
225 | mg_switch_to_pe0_level, mixing_length_1d, momentum_advec, & |
---|
226 | nc_const, netcdf_precision, neutral, ngsrb, & |
---|
227 | nsor, & |
---|
228 | nsor_ini, nx, ny, nz, ocean, omega, omega_sor, & |
---|
229 | passive_scalar, pch_index, phi, plant_canopy, prandtl_layer, & |
---|
230 | prandtl_number, precipitation, psolver, pt_damping_factor, & |
---|
231 | pt_damping_width, pt_reference, pt_surface, & |
---|
232 | pt_surface_initial_change, pt_vertical_gradient, & |
---|
233 | pt_vertical_gradient_level, q_surface, q_surface_initial_change, & |
---|
234 | q_vertical_gradient, q_vertical_gradient_level, & |
---|
235 | radiation, & |
---|
236 | random_generator, random_heatflux, rayleigh_damping_factor, & |
---|
237 | rayleigh_damping_height, recycling_width, residual_limit, & |
---|
238 | rif_max, rif_min, roughness_length, sa_surface, & |
---|
239 | sa_vertical_gradient, sa_vertical_gradient_level, scalar_advec, & |
---|
240 | scalar_exchange_coefficient, scalar_rayleigh_damping, & |
---|
241 | statistic_regions, subs_vertical_gradient, & |
---|
242 | subs_vertical_gradient_level, surface_heatflux, surface_pressure, & |
---|
243 | surface_scalarflux, surface_waterflux, & |
---|
244 | s_surface, & |
---|
245 | s_surface_initial_change, s_vertical_gradient, & |
---|
246 | s_vertical_gradient_level, timestep_scheme, & |
---|
247 | topography, topography_grid_convention, top_heatflux, & |
---|
248 | top_momentumflux_u, top_momentumflux_v, top_salinityflux, & |
---|
249 | turbulence, turbulent_inflow, ug_surface, ug_vertical_gradient, & |
---|
250 | ug_vertical_gradient_level, use_surface_fluxes, & |
---|
251 | use_top_fluxes, use_ug_for_galilei_tr, use_upstream_for_tke, & |
---|
252 | uv_heights, u_bulk, u_profile, vg_surface, vg_vertical_gradient, & |
---|
253 | vg_vertical_gradient_level, v_bulk, v_profile, ventilation_effect, & |
---|
254 | wall_adjustment, wall_heatflux, wall_humidityflux, wall_scalarflux, & |
---|
255 | z0h_factor |
---|
256 | |
---|
257 | NAMELIST /d3par/ averaging_interval, averaging_interval_pr, & |
---|
258 | create_disturbances, & |
---|
259 | cross_profiles, cross_ts_uymax, cross_ts_uymin, & |
---|
260 | data_output, data_output_format, data_output_masks, & |
---|
261 | data_output_pr, data_output_2d_on_each_pe, disturbance_amplitude, & |
---|
262 | disturbance_energy_limit, disturbance_level_b, & |
---|
263 | disturbance_level_t, do2d_at_begin, do3d_at_begin, do3d_compress, & |
---|
264 | do3d_comp_prec, dt, dt_averaging_input, dt_averaging_input_pr, & |
---|
265 | dt_coupling, dt_data_output, dt_data_output_av, dt_disturb, & |
---|
266 | dt_domask, dt_dopr, dt_dopr_listing, dt_dots, dt_do2d_xy, & |
---|
267 | dt_do2d_xz, dt_do2d_yz, dt_do3d, dt_max, dt_restart, & |
---|
268 | dt_run_control,end_time, force_print_header, mask_scale_x, & |
---|
269 | mask_scale_y, mask_scale_z, mask_x, mask_y, mask_z, mask_x_loop, & |
---|
270 | mask_y_loop, mask_z_loop, netcdf_data_format, normalizing_region, & |
---|
271 | npex, npey, nz_do3d, precipitation_amount_interval, & |
---|
272 | profile_columns, profile_rows, restart_time, section_xy, & |
---|
273 | section_xz, section_yz, skip_time_data_output, & |
---|
274 | skip_time_data_output_av, skip_time_dopr, skip_time_do2d_xy, & |
---|
275 | skip_time_do2d_xz, skip_time_do2d_yz, skip_time_do3d, & |
---|
276 | skip_time_domask, synchronous_exchange, termination_time_needed, & |
---|
277 | z_max_do2d |
---|
278 | |
---|
279 | |
---|
280 | NAMELIST /envpar/ host, local_dvrserver_running, maximum_cpu_time_allowed,& |
---|
281 | maximum_parallel_io_streams, revision, return_addres, & |
---|
282 | return_username, run_identifier, tasks_per_node, & |
---|
283 | write_binary |
---|
284 | |
---|
285 | ! |
---|
286 | !-- First read values of environment variables (this NAMELIST file is |
---|
287 | !-- generated by mrun) |
---|
288 | OPEN ( 90, FILE='ENVPAR', STATUS='OLD', FORM='FORMATTED', ERR=30 ) |
---|
289 | READ ( 90, envpar, ERR=31, END=32 ) |
---|
290 | CLOSE ( 90 ) |
---|
291 | |
---|
292 | ! |
---|
293 | !-- Calculate the number of groups into which parallel I/O is split. |
---|
294 | !-- The default for files which are opened by all PEs (or where each |
---|
295 | !-- PE opens his own independent file) is, that all PEs are doing input/output |
---|
296 | !-- in parallel at the same time. This might cause performance or even more |
---|
297 | !-- severe problems depending on the configuration of the underlying file |
---|
298 | !-- system. |
---|
299 | !-- First, set the default: |
---|
300 | IF ( maximum_parallel_io_streams == -1 .OR. & |
---|
301 | maximum_parallel_io_streams > numprocs ) THEN |
---|
302 | maximum_parallel_io_streams = numprocs |
---|
303 | ENDIF |
---|
304 | ! |
---|
305 | !-- Now calculate the number of io_blocks and the io_group to which the |
---|
306 | !-- respective PE belongs. I/O of the groups is done in serial, but in parallel |
---|
307 | !-- for all PEs belonging to the same group. |
---|
308 | !-- These settings are repeated in init_pegrid for the communicator comm2d, |
---|
309 | !-- which is not available here |
---|
310 | io_blocks = numprocs / maximum_parallel_io_streams |
---|
311 | io_group = MOD( myid+1, io_blocks ) |
---|
312 | |
---|
313 | ! |
---|
314 | !-- Data is read in parallel by groups of PEs |
---|
315 | DO i = 0, io_blocks-1 |
---|
316 | IF ( i == io_group ) THEN |
---|
317 | |
---|
318 | ! |
---|
319 | !-- Open the NAMELIST-file which is send with this job |
---|
320 | CALL check_open( 11 ) |
---|
321 | |
---|
322 | ! |
---|
323 | !-- Read the control parameters for initialization. |
---|
324 | !-- The namelist "inipar" must be provided in the NAMELIST-file. |
---|
325 | READ ( 11, inipar, ERR=10, END=11 ) |
---|
326 | |
---|
327 | #if defined ( __check ) |
---|
328 | ! |
---|
329 | !-- In case of a namelist file check, &inipar from the p3d file is |
---|
330 | !-- used. The p3d file here must be closed and the p3df file for reading |
---|
331 | !-- 3dpar is opened. |
---|
332 | IF ( check_restart == 1 ) THEN |
---|
333 | CALL close_file( 11 ) |
---|
334 | check_restart = 2 |
---|
335 | CALL check_open( 11 ) |
---|
336 | initializing_actions = 'read_restart_data' |
---|
337 | ENDIF |
---|
338 | #endif |
---|
339 | GOTO 12 |
---|
340 | |
---|
341 | 10 message_string = 'errors in \$inipar &or no \$inipar-namelist ' // & |
---|
342 | 'found (CRAY-machines only)' |
---|
343 | CALL message( 'parin', 'PA0271', 1, 2, 0, 6, 0 ) |
---|
344 | |
---|
345 | 11 message_string = 'no \$inipar-namelist found' |
---|
346 | CALL message( 'parin', 'PA0272', 1, 2, 0, 6, 0 ) |
---|
347 | |
---|
348 | ! |
---|
349 | !-- If required, read control parameters from restart file (produced by |
---|
350 | !-- a prior run). All PEs are reading from file created by PE0 (see |
---|
351 | !-- check_open) |
---|
352 | 12 IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN |
---|
353 | #if ! defined ( __check ) |
---|
354 | CALL read_var_list |
---|
355 | ! |
---|
356 | !-- The restart file will be reopened when reading the subdomain data |
---|
357 | CALL close_file( 13 ) |
---|
358 | |
---|
359 | ! |
---|
360 | !-- Increment the run count |
---|
361 | runnr = runnr + 1 |
---|
362 | #endif |
---|
363 | ENDIF |
---|
364 | |
---|
365 | ! |
---|
366 | !-- Definition of names of areas used for computing statistics. They must |
---|
367 | !-- be defined at this place, because they are allowed to be redefined by |
---|
368 | !-- the user in user_parin. |
---|
369 | region = 'total domain' |
---|
370 | |
---|
371 | ! |
---|
372 | !-- Read runtime parameters given by the user for this run (namelist |
---|
373 | !-- "d3par"). The namelist "d3par" can be omitted. In that case, default |
---|
374 | !-- values are used for the parameters. |
---|
375 | READ ( 11, d3par, END=20 ) |
---|
376 | |
---|
377 | ! |
---|
378 | !-- Read control parameters for optionally used model software packages |
---|
379 | 20 CALL package_parin |
---|
380 | |
---|
381 | ! |
---|
382 | !-- Read user-defined variables |
---|
383 | CALL user_parin |
---|
384 | |
---|
385 | ! |
---|
386 | !-- Check in case of initial run, if the grid point numbers are well |
---|
387 | !-- defined and allocate some arrays which are already needed in |
---|
388 | !-- init_pegrid or check_parameters. During restart jobs, these arrays |
---|
389 | !-- will be allocated in read_var_list. All other arrays are allocated |
---|
390 | !-- in init_3d_model. |
---|
391 | IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN |
---|
392 | |
---|
393 | IF ( nx <= 0 ) THEN |
---|
394 | WRITE( message_string, * ) 'no value or wrong value given', & |
---|
395 | ' for nx: nx=', nx |
---|
396 | CALL message( 'parin', 'PA0273', 1, 2, 0, 6, 0 ) |
---|
397 | ENDIF |
---|
398 | IF ( ny <= 0 ) THEN |
---|
399 | WRITE( message_string, * ) 'no value or wrong value given', & |
---|
400 | ' for ny: ny=', ny |
---|
401 | CALL message( 'parin', 'PA0274', 1, 2, 0, 6, 0 ) |
---|
402 | ENDIF |
---|
403 | IF ( nz <= 0 ) THEN |
---|
404 | WRITE( message_string, * ) 'no value or wrong value given', & |
---|
405 | ' for nz: nz=', nz |
---|
406 | CALL message( 'parin', 'PA0275', 1, 2, 0, 6, 0 ) |
---|
407 | ENDIF |
---|
408 | ! |
---|
409 | !-- ATTENTION: in case of changes to the following statement please |
---|
410 | !-- also check the allocate statement in routine read_var_list |
---|
411 | ALLOCATE( lad(0:nz+1),pt_init(0:nz+1), q_init(0:nz+1), & |
---|
412 | sa_init(0:nz+1), ug(0:nz+1), u_init(0:nz+1), & |
---|
413 | v_init(0:nz+1), vg(0:nz+1), & |
---|
414 | hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions), & |
---|
415 | hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) ) |
---|
416 | |
---|
417 | hom = 0.0 |
---|
418 | |
---|
419 | ENDIF |
---|
420 | |
---|
421 | ! |
---|
422 | !-- NAMELIST-file is not needed anymore |
---|
423 | CALL close_file( 11 ) |
---|
424 | |
---|
425 | ENDIF |
---|
426 | #if defined( __parallel ) && ! ( __check ) |
---|
427 | CALL MPI_BARRIER( MPI_COMM_WORLD, ierr ) |
---|
428 | #endif |
---|
429 | ENDDO |
---|
430 | |
---|
431 | RETURN |
---|
432 | |
---|
433 | 30 message_string = 'local file ENVPAR not found' // & |
---|
434 | '&some variables for steering may not be properly set' |
---|
435 | CALL message( 'parin', 'PA0276', 0, 1, 0, 6, 0 ) |
---|
436 | RETURN |
---|
437 | |
---|
438 | 31 message_string = 'errors in local file ENVPAR' // & |
---|
439 | '&some variables for steering may not be properly set' |
---|
440 | CALL message( 'parin', 'PA0277', 0, 1, 0, 6, 0 ) |
---|
441 | RETURN |
---|
442 | |
---|
443 | 32 message_string = 'no envpar-NAMELIST found in local file ENVPAR' // & |
---|
444 | '&some variables for steering may not be properly set' |
---|
445 | CALL message( 'parin', 'PA0278', 0, 1, 0, 6, 0 ) |
---|
446 | |
---|
447 | END SUBROUTINE parin |
---|