source: palm/trunk/SOURCE/outflow_turbulence.f90 @ 2716

Last change on this file since 2716 was 2716, checked in by kanani, 6 years ago

Correction of "Former revisions" section

  • Property svn:keywords set to Id
File size: 5.8 KB
Line 
1!> @file outflow_turbulence.f90
2!------------------------------------------------------------------------------!
3! This file is part of the PALM model system.
4!
5! PALM is free software: you can redistribute it and/or modify it under the
6! terms of the GNU General Public License as published by the Free Software
7! Foundation, either version 3 of the License, or (at your option) any later
8! version.
9!
10! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12! A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
13!
14! You should have received a copy of the GNU General Public License along with
15! PALM. If not, see <http://www.gnu.org/licenses/>.
16!
17! Copyright 1997-2017 Leibniz Universitaet Hannover
18!------------------------------------------------------------------------------!
19!
20! Current revisions:
21! -----------------
22!
23!
24! Former revisions:
25! -----------------
26! $Id: outflow_turbulence.f90 2716 2017-12-29 16:35:59Z kanani $
27! Corrected "Former revisions" section
28!
29! 2696 2017-12-14 17:12:51Z kanani
30! Change in file header (GPL part)
31!
32! 2101 2017-01-05 16:42:31Z suehring
33!
34! 2050 2016-11-08 15:00:55Z gronemeier
35! Initial version
36!
37!
38! Description:
39! ------------
40!> Routine based on inflow_turbulence.f90. Copies values of 3d data from a 2d
41!> vertical source plane (defined by outflow_source_plane) to the outflow
42!> boundary.
43!------------------------------------------------------------------------------!
44 SUBROUTINE outflow_turbulence
45
46    USE arrays_3d,                                                             &
47        ONLY:  e, pt, q, s, u, v, w
48
49    USE control_parameters,                                                    &
50        ONLY:  humidity, passive_scalar, outflow_source_plane
51
52    USE cpulog,                                                                &
53        ONLY:  cpu_log, log_point
54
55    USE grid_variables,                                                        &
56        ONLY:  ddx
57
58    USE indices,                                                               &
59        ONLY:  nbgp, nx, nxr, ny, nyn, nys, nyng, nysg, nzb, nzt
60
61    USE kinds
62
63    USE pegrid!,                                                                &
64        !ONLY:  comm1dx, id_outflow, id_outflow_source, ierr, myidx, status
65
66    IMPLICIT NONE
67
68    INTEGER(iwp) ::  i        !< loop index
69    INTEGER(iwp) ::  j        !< loop index
70    INTEGER(iwp) ::  k        !< loop index
71    INTEGER(iwp) ::  l        !< loop index
72    INTEGER(iwp) ::  ngp_ofv  !< number of grid points stored in outflow_val
73
74    REAL(wp), DIMENSION(nzb:nzt+1,nysg:nyng,7,nbgp) ::                         &
75       outflow_val            !< values to be copied to the outflow boundary
76
77
78    CALL cpu_log( log_point(56), 'outflow_turbulence', 'start' )
79!
80!-- Get number of grid points stored in outflow_val
81    ngp_ofv = ( nzt - nzb + 2 ) * ( nyn - nys + 1 + 2 * nbgp ) * 7 * nbgp
82!
83!-- Get position of the source plane inside the palm grid
84    i = outflow_source_plane * ddx
85!
86!-- Use instantaneous values instead of averaged profiles
87#if defined( __parallel )
88    IF ( myidx == id_outflow_source )  THEN
89       DO  l = 1, nbgp
90          DO  j = nysg, nyng
91             DO  k = nzb, nzt + 1
92
93                outflow_val(k,j,1,l) = u(k,j,i)
94                outflow_val(k,j,2,l) = v(k,j,i)
95                outflow_val(k,j,3,l) = w(k,j,i)
96                outflow_val(k,j,4,l) = pt(k,j,i)
97                outflow_val(k,j,5,l) = e(k,j,i)
98                IF ( humidity  )                                               &
99                   outflow_val(k,j,6,l) = q(k,j,i)
100                IF ( passive_scalar )                                          &
101                   outflow_val(k,j,7,l) = s(k,j,i)
102
103            ENDDO
104          ENDDO
105          i = i + 1
106       ENDDO
107
108    ENDIF
109#else
110    DO  l = 1, nbgp
111       DO  j = nysg, nyng
112          DO  k = nzb, nzt+1
113
114             outflow_val(k,j,1,l) = u(k,j,i)
115             outflow_val(k,j,2,l) = v(k,j,i)
116             outflow_val(k,j,3,l) = w(k,j,i)
117             outflow_val(k,j,4,l) = pt(k,j,i)
118             outflow_val(k,j,5,l) = e(k,j,i)
119             IF ( humidity  )                                                  &
120                outflow_val(k,j,6,l) = q(k,j,i)
121             IF ( passive_scalar )                                             &
122                outflow_val(k,j,7,l) = s(k,j,i)
123
124          ENDDO
125       ENDDO
126       i = i + 1
127    ENDDO
128#endif
129
130!
131!-- For parallel runs, send the values to the respective outflow PE
132#if defined( __parallel )
133    IF ( myidx == id_outflow_source  .AND.  myidx /= id_outflow )  THEN
134
135       CALL MPI_SEND( outflow_val(nzb,nysg,1,1), ngp_ofv, MPI_REAL,            &
136                      id_outflow, 1, comm1dx, ierr )
137
138    ELSEIF ( myidx /= id_outflow_source  .AND.  myidx == id_outflow )  THEN
139
140       outflow_val = 0.0_wp
141       CALL MPI_RECV( outflow_val(nzb,nysg,1,1), ngp_ofv, MPI_REAL,            &
142                      id_outflow_source, 1, comm1dx, status, ierr )
143
144    ENDIF
145#endif
146
147!
148!-- Copy values to the outflow
149    IF ( nxr == nx )  THEN
150
151       DO  j = nysg, nyng
152          DO  k = nzb, nzt + 1
153
154             u(k,j,nx+1:nx+nbgp)  = outflow_val(k,j,1,1:nbgp)
155             v(k,j,nx+1:nx+nbgp)  = outflow_val(k,j,2,1:nbgp)
156             w(k,j,nx+1:nx+nbgp)  = outflow_val(k,j,3,1:nbgp)
157             pt(k,j,nx+1:nx+nbgp) = outflow_val(k,j,4,1:nbgp)
158             e(k,j,nx+1:nx+nbgp)  = outflow_val(k,j,5,1:nbgp)
159             e(k,j,nx+1:nx+nbgp)  = MAX( e(k,j,nx+1:nx+nbgp), 0.0_wp )
160
161             IF ( humidity )                                                   &
162                q(k,j,nx+1:nx+nbgp)  = outflow_val(k,j,6,1:nbgp)
163             IF ( passive_scalar )                                             &
164                s(k,j,nx+1:nx+nbgp)  = outflow_val(k,j,7,1:nbgp)
165
166          ENDDO
167       ENDDO
168
169
170    ENDIF
171
172    CALL cpu_log( log_point(56), 'outflow_turbulence', 'stop' )
173
174 END SUBROUTINE outflow_turbulence
Note: See TracBrowser for help on using the repository browser.