!> @file modules.f90 !------------------------------------------------------------------------------! ! This file is part of PALM. ! ! PALM is free software: you can redistribute it and/or modify it under the ! terms of the GNU General Public License as published by the Free Software ! Foundation, either version 3 of the License, or (at your option) any later ! version. ! ! PALM is distributed in the hope that it will be useful, but WITHOUT ANY ! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR ! A PARTICULAR PURPOSE. See the GNU General Public License for more details. ! ! You should have received a copy of the GNU General Public License along with ! PALM. If not, see . ! ! Copyright 1997-2017 Leibniz Universitaet Hannover !------------------------------------------------------------------------------! ! ! Current revisions: ! ------------------ ! ! ! Former revisions: ! ----------------- ! $Id: modules.f90 2296 2017-06-28 07:53:56Z maronga $ ! Added parameters for model spinup ! ! 2292 2017-06-20 09:51:42Z schwenkel ! Implementation of new microphysic scheme: cloud_scheme = 'morrison' ! includes two more prognostic equations for cloud drop concentration (nc) ! and cloud water content (qc). ! ! 2277 2017-06-12 10:47:51Z kanani ! Added doxygen comments for variables/parameters, ! removed unused variables dissipation_control, do2d_xy_n, do2d_xz_n, do2d_yz_n, ! do3d_avs_n, lptnudge, lqnudge, lunudge, lvnudge, lwnudge, skip_do_avs, ! sums_up_fraction_l. ! ! 2259 2017-06-08 09:09:11Z gronemeier ! Implemented synthetic turbulence generator ! ! 2256 2017-06-07 13:58:08Z suehring ! Change default value of zeta_min to -20 ! Increase dimension for wall_heatflux, etc. ! ! 2233 2017-05-30 18:08:54Z suehring ! ! 2232 2017-05-30 17:47:52Z suehring ! Renamed wall_flags_0 and wall_flags_00 into advc_flags_1 and advc_flags_2, ! respectively. Moreover, introduced further flag array wall_flags_0. ! ! Adjustments for new topography concept: ! -fwxm, fwxp, fwym, fwyp, fxm, fxp, fym, fyp, rif_wall, wall_e_x, wall_e_y, ! -wall_v, wall_u, wall_w_x, wall_w_y, wall_qflux, wall_sflux, wall_nrflux, ! -wall_qrflux ! ! Adjustments for new surface concept: ! +land_surface ! -z0, z0h, z0q, us, ts, qs, qsws, nrs, nrsws, qrs, qrsws, ssws, ss, saswsb ! -nzb_diff_u, nzb_diff_v, nzt_diff ! -uswst, vswst, tswst, sswst, saswst, qswst, qrswst, nrswst, qswst_remote ! ! Generic tunnel setup: ! +tunnel_height, tunnel_length, tunnel_width_x, tunnel_width_y, ! +tunnel_wall_depth ! ! Topography input via netcdf ! +lod ! ! 2200 2017-04-11 11:37:51Z suehring ! -monotonic_adjustment ! ! 2174 2017-03-13 08:18:57Z maronga ! Changed default values for most_method to 'newton' ! ! 2118 2017-01-17 16:38:49Z raasch ! -acc_rank, background_communication, i_left, i_right, j_south, j_north, ! num_acc_per_node, on_device ! ! 2107 2017-01-09 12:21:49Z kanani ! Preparation for doxygen comments (Giersch) ! ! 2050 2016-11-08 15:00:55Z gronemeier ! Implement turbulent outflow condition ! ! 2037 2016-10-26 11:15:40Z knoop ! Anelastic approximation implemented ! ! 2031 2016-10-21 15:11:58Z knoop ! renamed variable rho to rho_ocean and rho_av to rho_ocean_av ! ! 2011 2016-09-19 17:29:57Z kanani ! +urban_surface, +lsf_exception, +varnamelength ! ! 2007 2016-08-24 15:47:17Z kanani ! Increased DIMENSION of data_output, data_output_user, do2d, do3d ! ! 2000 2016-08-20 18:09:15Z knoop ! Forced header and separation lines into 80 columns ! ! 1992 2016-08-12 15:14:59Z suehring ! +constant_top_scalarflux, top_scalarflux ! default of bc_s_t adjusted ! ! 1968 2016-07-18 12:01:49Z suehring ! Changed dimension for MPI-datatypes type_x_int and type_y_int ! ! 1960 2016-07-12 16:34:24Z suehring ! Separate humidity and passive scalar ! +bc_s_t_val, diss_s_s, diss_l_s, flux_s_s, flux_l_s, s, sp, s1, s2, s3, ssws_av, ! s_init, s_surf, sums_wsss_ws_l, ss, ssws, sswst, ts_m, wall_sflux ! +constant_scalarflux, ibc_s_b, ibc_s_t, s_vertical_gradient_level_ind ! ! Unused variables removed ! -gamma_x, gamma_y, gamma_z, var_x, var_y, var_z ! ! Change initial values (in order to unify gradient calculation): ! pt_vertical_gradient_level, sa_vertical_gradient_level ! ! 1957 2016-07-07 10:43:48Z suehring ! +fl_max, num_leg, num_var_fl, num_var_fl_user, var_fl_max, virtual_flight ! ! 1918 2016-05-27 14:35:57Z raasch ! default timestep switched from -1.0 to +1.0 in order to avoid wrong sign of ! initially calculated divergence ! ! 1906 2016-05-24 14:38:08Z suehring ! default value of mg_switch_to_pe0_level changed to -1 ! ! 1849 2016-04-08 11:33:18Z hoffmann ! bfactor, mass_of_solute, molecular_weight_of_solute, molecular_weight_of_water, ! vanthoff moved to mod_particle_attributes. ! dt_micro and several cloud_parameters moved to microphysics_mod. ! 1d-microphysics profiles moved to microphysics_mod. ! ! 1845 2016-04-08 08:29:13Z raasch ! -nzb_2d ! ! 1833 2016-04-07 14:23:03Z raasch ! spectra parameter moved to spectra module ! ! 1831 2016-04-07 13:15:51Z hoffmann ! curvature_solution_effects removed ! turbulence renamed collision_turbulence, drizzle renamed ! cloud_water_sedimentation ! ! 1822 2016-04-07 07:49:42Z hoffmann ! icloud_scheme removed. microphysics_sat_adjust, microphysics_kessler, ! microphysics_seifert added. ! ! 1815 2016-04-06 13:49:59Z raasch ! cpp-directive for decalpha removed ! ! 1808 2016-04-05 19:44:00Z raasch ! MPI module used by default on all machines ! ! 1804 2016-04-05 16:30:18Z maronga ! Removed code for parameter file check (__check) ! ! 1788 2016-03-10 11:01:04Z maronga ! Added roughness length for moisture (z0q) ! ! 1786 2016-03-08 05:49:27Z raasch ! module spectrum moved to new separate module ! ! 1783 2016-03-06 18:36:17Z raasch ! netcdf variables moved to the netcdf-interface module ! ! 1779 2016-03-03 08:01:28Z raasch ! coupling_char extended to LEN=3 ! ! 1764 2016-02-28 12:45:19Z raasch ! some reformatting ! ! 1762 2016-02-25 12:31:13Z hellstea ! +nest_* variables, size of volume_flow arrays increased by one element ! ! 1738 2015-12-18 13:56:05Z raasch ! +mean_surface_level_height ! ! 1695 2015-10-27 10:03:11Z maronga ! Removed rif (forgotten in last revision) ! ! 1693 2015-10-27 08:35:45Z maronga ! Renamed zp -> z_mo ! ! 1691 2015-10-26 16:17:44Z maronga ! Renamed Obukhov length. Added ol, removed rif. Increased number of profiles ! (pr_palm). Changed default values for dissipation_1d to 'detering' and ! (mixing_length_1d to 'blackadar'. Added most_method. rif_min and rif_max ! renamed to zeta_min and zeta_max and new values assigned. ! ! 1682 2015-10-07 23:56:08Z knoop ! Code annotations made doxygen readable ! ! 1677 2015-10-02 13:25:23Z boeske ! +ngp_yz_int, type_xz_int, type_yz_int ! ! 1666 2015-09-23 07:31:10Z raasch ! +user_interface_current_revision, user_interface_required_revision in ! control_parameters ! ! 1639 2015-08-31 14:46:48Z knoop ! Bugfix: string 'unknown' extended to match LEN=13 ! ! 1575 2015-03-27 09:56:27Z raasch ! +ngp_xz ! ! 1560 2015-03-06 10:48:54Z keck ! +recycling_yshift ! ! 1557 2015-03-05 16:43:04Z suehring ! +monotonic_adjustment ! ! 1551 2015-03-03 14:18:16Z maronga ! Increased pr_palm to 120. Increased length of dots_unit and dots_label to 13 ! digits. Increased length of domask, do2d, and do3d to 20 digits. ! ! 1496 2014-12-02 17:25:50Z maronga ! Renamed "radiation" -> "cloud_top_radiation" ! ! 1484 2014-10-21 10:53:05Z kanani ! Changes due to new module structure of the plant canopy model: ! canopy-model related parameters/variables moved to module ! plant_canopy_model_mod ! ! 1468 2014-09-24 14:06:57Z maronga ! Adapted for use on up to 6-digit processor cores. ! Increased identifier string length for user-defined quantities to 20. ! ! 1450 2014-08-21 07:31:51Z heinze ! ntnudge from 100 to 1000 increased to allow longer simulations ! ! 1431 2014-07-15 14:47:17Z suehring ! +var_d ! ! 1429 2014-07-15 12:53:45Z knoop ! +ensemble_member_nr to prepare the random_generator for ensemble runs ! ! 1382 2014-04-30 12:15:41Z boeske ! Renamed variables which store large scale forcing tendencies ! pt_lsa -> td_lsa_lpt, pt_subs -> td_sub_lpt, ! q_lsa -> td_lsa_q, q_subs -> td_sub_q ! ! 1365 2014-04-22 15:03:56Z boeske ! Usage of large scale forcing enabled: ! increase pr_palm from 90 to 100 to allow for more standard profiles ! + ngp_sums_ls, pt_lsa, pt_subs, q_lsa, q_subs, tmp_tnudge, sums_ls_l, ! use_subsidence_tendencies ! ! 1361 2014-04-16 15:17:48Z hoffmann ! tend_* removed ! call_microphysics_at_all_substeps added ! default of drizzle set to true ! ! 1359 2014-04-11 17:15:14Z hoffmann ! particle_attributes moved to mod_particle_attributes.f90 ! ! 1353 2014-04-08 15:21:23Z heinze ! REAL constants provided with KIND-attribute ! ! 1327 2014-03-21 11:00:16Z raasch ! REAL constants defined as wp-kind ! -avs_output, data_output_format, do3d_compress, iso2d_output, netcdf_output ! ! 1320 2014-03-20 08:40:49Z raasch ! ONLY-attribute added to USE-statements, ! kind-parameters added to all INTEGER and REAL declaration statements, ! kinds are defined in new module kinds, ! old module precision_kind is removed, ! revision history before 2012 removed, ! comment fields (!:) to be used for variable explanations added to ! all variable declaration statements ! ! 1318 2014-03-17 13:35:16Z raasch ! module cpulog moved to new separate module-file ! interface for cpu_log removed ! ! 1314 2014-03-14 18:25:17Z suehring ! + log_z_z0, number_of_sublayers, z0_av_global ! 1308 2014-03-13 14:58:42Z fricke ! +ntdim_2d_xy, ntdim_2d_xz, ntdim_2d_yz, ntdim_3d ! ! 1257 2013-11-08 15:18:40Z raasch ! set default values for grid indices of maximum velocity components ! u|v|w_max_ijk ! ! 1241 2013-10-30 11:36:58Z heinze ! Usage of nudging enabled ! +nudging, ntnudge, ptnudge, qnudge, tnudge, unudge, vnudge, wnudge ! increase pr_palm from 80 to 90 to allow for more standard profiles ! ! Enable prescribed time depenend surface fluxes and geostrophic wind read in ! from external file LSF_DATA ! +large_scale_forcing, lsf_surf, lsf_vert, nlsf, time_surf, shf_surf, qsws_surf, ! pt_surf, q_surf, p_surf, time_vert, ug_vert, vg_vert, wsubs_vert ! ! 1221 2013-09-10 08:59:13Z raasch ! wall_flags_0 changed to 32bit int, +wall_flags_00, ! +rflags_s_inner, rflags_invers ! ! 1216 2013-08-26 09:31:42Z raasch ! +transpose_compute_overlap, ! several variables are now defined in the serial (non-parallel) case also ! ! 1212 2013-08-15 08:46:27Z raasch ! +tri ! ! 1179 2013-06-14 05:57:58Z raasch ! +reference_state, ref_state, use_initial_profile_as_reference, vpt_reference, ! use_reference renamed use_single_reference_value ! ! 1159 2013-05-21 11:58:22Z fricke ! -bc_lr_dirneu, bc_lr_neudir, bc_ns_dirneu, bc_ns_neudir ! +use_cmax ! ! 1128 2013-04-12 06:19:32Z raasch ! +background_communication, i_left, i_right, j_north, j_south, req, req_count, ! send_receive, sendrecv_in_background, wait_stat ! ! 1115 2013-03-26 18:16:16Z hoffmann ! unused variables removed ! ! 1113 2013-03-10 02:48:14Z raasch ! +on_device ! ! 1111 2013-03-08 23:54:10Z raasch ! +tric, nr_timesteps_this_run ! ! 1106 2013-03-04 05:31:38Z raasch ! array_kind renamed precision_kind, pdims defined in serial code ! bugfix: default value assigned to coupling_start_time ! ! 1095 2013-02-03 02:21:01Z raasch ! FORTRAN error in r1092 removed ! ! 1092 2013-02-02 11:24:22Z raasch ! character length in some derived type changed for better alignment ! ! 1065 2012-11-22 17:42:36Z hoffmann ! + c_sedimentation, limiter_sedimentation, turbulence, a_1, a_2, a_3, b_1, b_2, ! + b_3, c_1, c_2, c_3, beta_cc ! ! bottom boundary condition of qr, nr changed from Dirichlet to Neumann ! ! 1053 2012-11-13 17:11:03Z hoffmann ! necessary expansions according to the two new prognostic equations (nr, qr) ! of the two-moment cloud physics scheme: ! +*_init, flux_l_*, diss_l_*, flux_s_*, diss_s_*, *sws, *swst, tend_*, *, *_p ! +t*_m, *_1, *_2, *_3, *_av, bc_*_b, bc_*_t, ibc_*_b, ibc_*_t, bc_*_t_val, ! +*_vertical_gradient, *_surface_initial_change, *_vertical_gradient_level, ! +*_vertical_gradient_level_ind, *_surface, constant_waterflux_*, ! +cloud_scheme, icloud_scheme, surface_waterflux_*, sums_ws*s_ws_l, wall_*flux ! ! constants for the two-moment scheme: ! +a_vent, a_term, b_vent, b_term, c_evap, c_term, cof, eps_sb, k_cc, k_cr, k_rr, ! +k_br, kappa_rr, kin_vis_air, mu_constant_value, nc, pirho_l, dpirho_l, rho_1, ! +schmidt, schmidt_p_1d3, stp, x0, xmin, xmax, dt_precipitation, w_precipitation ! ! steering parameters for the two_moment scheme: ! +mu_constant, ventilation_effect ! ! 1036 2012-10-22 13:43:42Z raasch ! code put under GPL (PALM 3.9) ! ! 1031 2012-10-19 14:35:30Z raasch ! +output_format_netcdf ! ! 1015 2012-09-27 09:23:24Z raasch ! +acc_rank, num_acc_per_node, ! -adjust_mixing_length ! ! 1010 2012-09-20 07:59:54Z raasch ! pointer free version can be generated with cpp switch __nopointer ! ! 1003 2012-09-14 14:35:53Z raasch ! -grid_matching, nxa, nya, etc., nnx_pe, nny_pe, spl_* ! ! 1001 2012-09-13 14:08:46Z raasch ! -asselin_filter_factor, cut_spline_overshoot, dt_changed, last_dt_change, ! last_dt_change_1d, long_filter_factor, overshoot_limit_*, ups_limit_* ! several pointer/target arrays converted to normal ones ! ! 996 2012-09-07 10:41:47Z raasch ! -use_prior_plot1d_parameters ! ! 978 2012-08-09 08:28:32Z fricke ! +c_u_m, c_u_m_l, c_v_m, c_v_m_l, c_w_m, c_w_m_l, ! +bc_lr_dirneu, bc_lr_neudir, bc_ns_dirneu, bc_ns_neudir ! -km_damp_x, km_damp_y, km_damp_max, outflow_damping_width ! +z0h, z0h_av, z0h_factor, z0h1d ! +ptdf_x, ptdf_y, pt_damping_width, pt_damping_factor ! ! 964 2012-07-26 09:14:24Z raasch ! -cross_linecolors, cross_linestyles, cross_normalized_x, cross_normx_factor, ! cross_normalized_y, cross_normy_factor, cross_pnc_local, ! cross_profile_numbers, cross_profile_number_counter, cross_uxmax, ! cross_uxmax_computed, cross_uxmax_normalized, ! cross_uxmax_normalized_computed, cross_uxmin, cross_uxmin_computed, ! cross_uxmin_normalized, cross_uxmin_normalized_computed, cross_uymax, ! cross_uymin, cross_xtext, dopr_crossindex, dopr_label, linecolors, linestyles, ! nz_do1d, profil_output, z_max_do1d, z_max_do1d_normalized ! ! 951 2012-07-19 14:22:52Z hoffmann ! changing profile_columns and profile_rows ! ! 940 2012-07-09 14:31:00Z raasch ! +neutral ! ! 927 2012-06-06 19:15:04Z raasch ! +masking_method ! ! 880 2012-04-13 06:28:59Z raasch ! gathered_size, subdomain_size moved to control_parameters ! ! 866 2012-03-28 06:44:41Z raasch ! interface for global_min_max changed ! ! 861 2012-03-26 14:18:34Z suehring ! +wall_flags_0 ! -boundary_flags ! +nzb_max ! +adv_sca_1, +adv_mom_1 ! ! 849 2012-03-15 10:35:09Z raasch ! +deleted_particles, deleted_tails, tr.._count_sum, tr.._count_recv_sum in ! particle_attributes, ! +de_dx, de_dy, de_dz in arrays_3d, ! first_call_advec_particles renamed first_call_lpm ! ! 828 2012-02-21 12:00:36Z raasch ! +dissipation_classes, radius_classes, use_kernel_tables, ! particle feature color renamed class ! ! 825 2012-02-19 03:03:44Z raasch ! +bfactor, curvature_solution_effects, eps_ros, molecular_weight_of_water, ! vanthoff, -b_cond in cloud_parameters, ! dopts_num increased to 29, particle attributes speed_x|y|z_sgs renamed ! rvar1|2|3 ! wang_collision_kernel and turbulence_effects_on_collision replaced by ! collision_kernel, hall_kernel, palm_kernel, wang_kernel ! ! 809 2012-01-30 13:32:58Z marongas ! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives ! ! 807 2012-01-25 11:53:51Z maronga ! New cpp directive "__check" implemented which is used by check_namelist_files. ! New parameter check_restart has been defined which is needed by ! check_namelist_files only. ! ! 805 2012-01-17 15:53:28Z franke ! Bugfix collective_wait must be out of parallel branch for runs in serial mode ! ! 801 2012-01-10 17:30:36Z suehring ! Dimesion of sums_wsus_ws_l, ! sums_wsvs_ws_l, sums_us2_ws_l, sums_vs2_ws_l, ! sums_ws2_ws_l, sums_wspts_ws_l, sums_wsqs_ws_l, sums_wssas_ws_l increased. ! for thread-safe summation in advec_ws. ! ! RCS Log replace by Id keyword, revision history cleaned up ! ! Revision 1.95 2007/02/11 13:18:30 raasch ! version 3.1b (last under RCS control) ! ! Revision 1.1 1997/07/24 11:21:26 raasch ! Initial revision ! ! !------------------------------------------------------------------------------! ! Description: ! ------------ !> Definition of all variables !> !> @todo Add missing variable descriptions (Siggi) !------------------------------------------------------------------------------! !------------------------------------------------------------------------------! ! Description: ! ------------ !> Definition of variables for special advection schemes. !------------------------------------------------------------------------------! MODULE advection USE kinds REAL(wp), DIMENSION(:), ALLOCATABLE :: aex !< Siggi REAL(wp), DIMENSION(:), ALLOCATABLE :: bex !< Siggi REAL(wp), DIMENSION(:), ALLOCATABLE :: dex !< Siggi REAL(wp), DIMENSION(:), ALLOCATABLE :: eex !< Siggi SAVE END MODULE advection !------------------------------------------------------------------------------! ! Description: ! ------------ !> Definition of all arrays defined on the computational grid. !------------------------------------------------------------------------------! MODULE arrays_3d USE kinds REAL(wp), DIMENSION(:), ALLOCATABLE :: c_u_m !< Siggi REAL(wp), DIMENSION(:), ALLOCATABLE :: c_u_m_l !< Siggi REAL(wp), DIMENSION(:), ALLOCATABLE :: c_v_m !< Siggi REAL(wp), DIMENSION(:), ALLOCATABLE :: c_v_m_l !< Siggi REAL(wp), DIMENSION(:), ALLOCATABLE :: c_w_m !< Siggi REAL(wp), DIMENSION(:), ALLOCATABLE :: c_w_m_l !< Siggi REAL(wp), DIMENSION(:), ALLOCATABLE :: ddzu !< 1/dzu REAL(wp), DIMENSION(:), ALLOCATABLE :: ddzu_pres !< modified ddzu for pressure solver REAL(wp), DIMENSION(:), ALLOCATABLE :: dd2zu !< 1/(dzu(k)+dzu(k+1)) REAL(wp), DIMENSION(:), ALLOCATABLE :: dzu !< vertical grid size (u-grid) REAL(wp), DIMENSION(:), ALLOCATABLE :: ddzw !< 1/dzw REAL(wp), DIMENSION(:), ALLOCATABLE :: dzw !< vertical grid size (w-grid) REAL(wp), DIMENSION(:), ALLOCATABLE :: hyp !< hydrostatic pressure REAL(wp), DIMENSION(:), ALLOCATABLE :: inflow_damping_factor !< used for turbulent inflow (non-cyclic boundary conditions) REAL(wp), DIMENSION(:), ALLOCATABLE :: l_grid !< geometric mean of grid sizes dx, dy, dz REAL(wp), DIMENSION(:), ALLOCATABLE :: ptdf_x !< damping factor for potential temperature in x-direction REAL(wp), DIMENSION(:), ALLOCATABLE :: ptdf_y !< damping factor for potential temperature in y-direction REAL(wp), DIMENSION(:), ALLOCATABLE :: p_surf !< time-dependent surface pressure (large scale forcing) REAL(wp), DIMENSION(:), ALLOCATABLE :: pt_surf !< time-dependent surface temperature (large scale forcing) REAL(wp), DIMENSION(:), ALLOCATABLE :: pt_init !< initial profile of potential temperature REAL(wp), DIMENSION(:), ALLOCATABLE :: qsws_surf !< time-dependent surface latent heat flux (large scale forcing) REAL(wp), DIMENSION(:), ALLOCATABLE :: q_init !< initial profile of specific humidity !< (or total water content with active cloud physics) REAL(wp), DIMENSION(:), ALLOCATABLE :: q_surf !< time-dependent surface specific humidity (large scale forcing) REAL(wp), DIMENSION(:), ALLOCATABLE :: rdf !< rayleigh damping factor for velocity components REAL(wp), DIMENSION(:), ALLOCATABLE :: rdf_sc !< rayleigh damping factor for scalar quantities REAL(wp), DIMENSION(:), ALLOCATABLE :: ref_state !< reference state of potential temperature !< (and density in case of ocean simulation) REAL(wp), DIMENSION(:), ALLOCATABLE :: s_init !< initial profile of passive scalar concentration REAL(wp), DIMENSION(:), ALLOCATABLE :: sa_init !< initial profile of salinity (ocean) REAL(wp), DIMENSION(:), ALLOCATABLE :: shf_surf !< time-dependent surface sensible heat flux (large scale forcing) REAL(wp), DIMENSION(:), ALLOCATABLE :: timenudge !< times at which vertical profiles are defined in NUDGING_DATA (nudging) REAL(wp), DIMENSION(:), ALLOCATABLE :: time_surf !< times at which surface values/fluxes are defined in LSF_DATA (large scale forcing) REAL(wp), DIMENSION(:), ALLOCATABLE :: time_vert !< times at which vertical profiles are defined in LSF_DATA (large scale forcing) REAL(wp), DIMENSION(:), ALLOCATABLE :: tmp_tnudge !< current nudging time scale REAL(wp), DIMENSION(:), ALLOCATABLE :: ug !< geostrophic wind component in x-direction REAL(wp), DIMENSION(:), ALLOCATABLE :: u_init !< initial profile of horizontal velocity component u REAL(wp), DIMENSION(:), ALLOCATABLE :: vg !< geostrophic wind component in y-direction REAL(wp), DIMENSION(:), ALLOCATABLE :: v_init !< initial profile of horizontal velocity component v REAL(wp), DIMENSION(:), ALLOCATABLE :: w_subs !< subsidence/ascent velocity REAL(wp), DIMENSION(:), ALLOCATABLE :: zu !< vertical grid coordinate of u-grid (in m) REAL(wp), DIMENSION(:), ALLOCATABLE :: zw !< vertical grid coordinate of w-grid (in m) REAL(wp), DIMENSION(:,:), ALLOCATABLE :: c_u !< phase speed of u-velocity component REAL(wp), DIMENSION(:,:), ALLOCATABLE :: c_v !< phase speed of v-velocity component REAL(wp), DIMENSION(:,:), ALLOCATABLE :: c_w !< phase speed of w-velocity component REAL(wp), DIMENSION(:,:), ALLOCATABLE :: diss_s_e !< artificial numerical dissipation flux at south face of grid box - subgrid-scale TKE REAL(wp), DIMENSION(:,:), ALLOCATABLE :: diss_s_nc !< artificial numerical dissipation flux at south face of grid box - clouddrop-number concentration REAL(wp), DIMENSION(:,:), ALLOCATABLE :: diss_s_nr !< artificial numerical dissipation flux at south face of grid box - raindrop-number concentration REAL(wp), DIMENSION(:,:), ALLOCATABLE :: diss_s_pt !< artificial numerical dissipation flux at south face of grid box - potential temperature REAL(wp), DIMENSION(:,:), ALLOCATABLE :: diss_s_q !< artificial numerical dissipation flux at south face of grid box - mixing ratio REAL(wp), DIMENSION(:,:), ALLOCATABLE :: diss_s_qc !< artificial numerical dissipation flux at south face of grid box - cloudwater REAL(wp), DIMENSION(:,:), ALLOCATABLE :: diss_s_qr !< artificial numerical dissipation flux at south face of grid box - rainwater REAL(wp), DIMENSION(:,:), ALLOCATABLE :: diss_s_s !< artificial numerical dissipation flux at south face of grid box - passive scalar REAL(wp), DIMENSION(:,:), ALLOCATABLE :: diss_s_sa !< artificial numerical dissipation flux at south face of grid box - salinity REAL(wp), DIMENSION(:,:), ALLOCATABLE :: diss_s_u !< artificial numerical dissipation flux at south face of grid box - u-component REAL(wp), DIMENSION(:,:), ALLOCATABLE :: diss_s_v !< artificial numerical dissipation flux at south face of grid box - v-component REAL(wp), DIMENSION(:,:), ALLOCATABLE :: diss_s_w !< artificial numerical dissipation flux at south face of grid box - w-component REAL(wp), DIMENSION(:,:), ALLOCATABLE :: dzu_mg !< vertical grid size (u-grid) for multigrid pressure solver REAL(wp), DIMENSION(:,:), ALLOCATABLE :: dzw_mg !< vertical grid size (w-grid) for multigrid pressure solver REAL(wp), DIMENSION(:,:), ALLOCATABLE :: flux_s_e !< 6th-order advective flux at south face of grid box - subgrid-scale TKE REAL(wp), DIMENSION(:,:), ALLOCATABLE :: flux_s_nc !< 6th-order advective flux at south face of grid box - clouddrop-number concentration REAL(wp), DIMENSION(:,:), ALLOCATABLE :: flux_s_nr !< 6th-order advective flux at south face of grid box - raindrop-number concentration REAL(wp), DIMENSION(:,:), ALLOCATABLE :: flux_s_pt !< 6th-order advective flux at south face of grid box - potential temperature REAL(wp), DIMENSION(:,:), ALLOCATABLE :: flux_s_q !< 6th-order advective flux at south face of grid box - mixing ratio REAL(wp), DIMENSION(:,:), ALLOCATABLE :: flux_s_qc !< 6th-order advective flux at south face of grid box - cloudwater REAL(wp), DIMENSION(:,:), ALLOCATABLE :: flux_s_qr !< 6th-order advective flux at south face of grid box - rainwater REAL(wp), DIMENSION(:,:), ALLOCATABLE :: flux_s_s !< 6th-order advective flux at south face of grid box - passive scalar REAL(wp), DIMENSION(:,:), ALLOCATABLE :: flux_s_sa !< 6th-order advective flux at south face of grid box - salinity REAL(wp), DIMENSION(:,:), ALLOCATABLE :: flux_s_u !< 6th-order advective flux at south face of grid box - u-component REAL(wp), DIMENSION(:,:), ALLOCATABLE :: flux_s_v !< 6th-order advective flux at south face of grid box - v-component REAL(wp), DIMENSION(:,:), ALLOCATABLE :: flux_s_w !< 6th-order advective flux at south face of grid box - w-component REAL(wp), DIMENSION(:,:), ALLOCATABLE :: f1_mg !< Siggi REAL(wp), DIMENSION(:,:), ALLOCATABLE :: f2_mg !< Siggi REAL(wp), DIMENSION(:,:), ALLOCATABLE :: f3_mg !< Siggi REAL(wp), DIMENSION(:,:), ALLOCATABLE :: mean_inflow_profiles !< used for turbulent inflow (non-cyclic boundary conditions) REAL(wp), DIMENSION(:,:), ALLOCATABLE :: precipitation_amount !< precipitation amount due to gravitational settling (bulk microphysics) REAL(wp), DIMENSION(:,:), ALLOCATABLE :: precipitation_rate !< precipitation rate (bulk microphysics) REAL(wp), DIMENSION(:,:), ALLOCATABLE :: ptnudge !< vertical profile of pot. temperature interpolated to vertical grid (nudging) REAL(wp), DIMENSION(:,:), ALLOCATABLE :: pt_slope_ref !< potential temperature in rotated coordinate system !< (in case of sloped surface) REAL(wp), DIMENSION(:,:), ALLOCATABLE :: qnudge !< vertical profile of specific humidity interpolated to vertical grid (nudging) REAL(wp), DIMENSION(:,:), ALLOCATABLE :: tnudge !< vertical profile of nudging time scale interpolated to vertical grid (nudging) REAL(wp), DIMENSION(:,:), ALLOCATABLE :: td_lsa_lpt !< temperature tendency due to large scale advection (large scale forcing) REAL(wp), DIMENSION(:,:), ALLOCATABLE :: td_lsa_q !< specific humidity tendency due to large scale advection (large scale forcing) REAL(wp), DIMENSION(:,:), ALLOCATABLE :: td_sub_lpt !< temperature tendency due to subsidence/ascent (large scale forcing) REAL(wp), DIMENSION(:,:), ALLOCATABLE :: td_sub_q !< specific humidity tendency due to subsidence/ascent (large scale forcing) REAL(wp), DIMENSION(:,:), ALLOCATABLE :: total_2d_a !< Siggi REAL(wp), DIMENSION(:,:), ALLOCATABLE :: total_2d_o !< Siggi REAL(wp), DIMENSION(:,:), ALLOCATABLE :: ug_vert !< vertical profile of geostrophic wind component in x-direction interpolated to vertical grid (large scale forcing) REAL(wp), DIMENSION(:,:), ALLOCATABLE :: unudge !< vertical profile of wind component in x-direction interpolated to vertical grid (nudging) REAL(wp), DIMENSION(:,:), ALLOCATABLE :: vnudge !< vertical profile of wind component in y-direction interpolated to vertical grid (nudging) REAL(wp), DIMENSION(:,:), ALLOCATABLE :: vg_vert !< vertical profile of geostrophic wind component in y-direction interpolated to vertical grid (large scale forcing) REAL(wp), DIMENSION(:,:), ALLOCATABLE :: wnudge !< vertical profile of subsidence/ascent velocity interpolated to vertical grid (nudging) ??? REAL(wp), DIMENSION(:,:), ALLOCATABLE :: wsubs_vert !< vertical profile of wind component in z-direction interpolated to vertical grid (nudging) ??? REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: d !< divergence REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: de_dx !< gradient of sgs tke in x-direction (lpm) REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: de_dy !< gradient of sgs tke in y-direction (lpm) REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: de_dz !< gradient of sgs tke in z-direction (lpm) REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: diss !< TKE dissipation rate REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: diss_l_e !< artificial numerical dissipation flux at left face of grid box - subgrid-scale TKE REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: diss_l_nc !< artificial numerical dissipation flux at left face of grid box - clouddrop-number concentration REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: diss_l_nr !< artificial numerical dissipation flux at left face of grid box - raindrop-number concentration REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: diss_l_pt !< artificial numerical dissipation flux at left face of grid box - potential temperature REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: diss_l_q !< artificial numerical dissipation flux at left face of grid box - mixing ratio REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: diss_l_qc !< artificial numerical dissipation flux at left face of grid box - cloudwater REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: diss_l_qr !< artificial numerical dissipation flux at left face of grid box - rainwater REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: diss_l_s !< artificial numerical dissipation flux at left face of grid box - passive scalar REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: diss_l_sa !< artificial numerical dissipation flux at left face of grid box - salinity REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: diss_l_u !< artificial numerical dissipation flux at left face of grid box - u-component REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: diss_l_v !< artificial numerical dissipation flux at left face of grid box - v-component REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: diss_l_w !< artificial numerical dissipation flux at left face of grid box - w-component REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: flux_l_e !< 6th-order advective flux at south face of grid box - subgrid-scale TKE REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: flux_l_nc !< 6th-order advective flux at south face of grid box - clouddrop-number concentration REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: flux_l_nr !< 6th-order advective flux at south face of grid box - raindrop-number concentration REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: flux_l_pt !< 6th-order advective flux at south face of grid box - potential temperature REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: flux_l_q !< 6th-order advective flux at south face of grid box - mixing ratio REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: flux_l_qc !< 6th-order advective flux at south face of grid box - cloudwater REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: flux_l_qr !< 6th-order advective flux at south face of grid box - rainwater REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: flux_l_s !< 6th-order advective flux at south face of grid box - passive scalar REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: flux_l_sa !< 6th-order advective flux at south face of grid box - salinity REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: flux_l_u !< 6th-order advective flux at south face of grid box - u-component REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: flux_l_v !< 6th-order advective flux at south face of grid box - v-component REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: flux_l_w !< 6th-order advective flux at south face of grid box - w-component REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: kh !< eddy diffusivity for heat REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: km !< eddy diffusivity for momentum REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: l_wall !< near-wall mixing length REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: prr !< rain rate REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: p_loc !< Siggi REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: tend !< tendency field (time integration) REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: tric !< Siggi REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: u_m_l !< Siggi REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: u_m_n !< Siggi REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: u_m_r !< Siggi REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: u_m_s !< Siggi REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: v_m_l !< Siggi REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: v_m_n !< Siggi REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: v_m_r !< Siggi REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: v_m_s !< Siggi REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: w_m_l !< Siggi REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: w_m_n !< Siggi REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: w_m_r !< Siggi REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: w_m_s !< Siggi #if defined( __nopointer ) REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: e !< subgrid-scale turbulence kinetic energy (sgs tke) REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: e_p !< prognostic value of sgs tke REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: nc !< cloud drop number density REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: nc_p !< prognostic value of cloud drop number density REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: nr !< rain drop number density REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: nr_p !< prognostic value of rain drop number density REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: p !< perturbation pressure REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: prho !< potential density REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: pt !< potential temperature REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: pt_p !< prognostic value of potential temperature REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: q !< specific humidity !< (or total water content with active cloud physics) REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: q_p !< prognostic value of specific humidity REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: qc !< cloud water content REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: qc_p !< cloud water content REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: ql !< liquid water content REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: ql_c !< change in liquid water content due to !< condensation/evaporation during last time step REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: ql_v !< volume of liquid water REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: ql_vp !< liquid water weighting factor REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: qr !< rain water content REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: qr_p !< prognostic value of rain water content REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: rho_ocean !< density of ocean REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: s !< passive scalar REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: s_p !< prognostic value of passive scalar REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: sa !< ocean salinity REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: sa_p !< prognostic value of ocean salinity REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: te_m !< weighted tendency of e for previous sub-timestep (Runge-Kutta) REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: tnc_m !< weighted tendency of nc for previous sub-timestep (Runge-Kutta) REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: tnr_m !< weighted tendency of nr for previous sub-timestep (Runge-Kutta) REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: tpt_m !< weighted tendency of pt for previous sub-timestep (Runge-Kutta) REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: tq_m !< weighted tendency of q for previous sub-timestep (Runge-Kutta) REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: tqc_m !< weighted tendency of qc for previous sub-timestep (Runge-Kutta) REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: tqr_m !< weighted tendency of qr for previous sub-timestep (Runge-Kutta) REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: ts_m !< weighted tendency of s for previous sub-timestep (Runge-Kutta) REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: tsa_m !< weighted tendency of sa for previous sub-timestep (Runge-Kutta) REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: tu_m !< weighted tendency of u for previous sub-timestep (Runge-Kutta) REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: tv_m !< weighted tendency of v for previous sub-timestep (Runge-Kutta) REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: tw_m !< weighted tendency of w for previous sub-timestep (Runge-Kutta) REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: u !< horizontal velocity component u (x-direction) REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: u_p !< prognostic value of u REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: v !< horizontal velocity component v (y-direction) REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: v_p !< prognostic value of v REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: vpt !< virtual potential temperature REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: w !< vertical velocity component w (z-direction) REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: w_p !< prognostic value of w #else REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: e_1 !< pointer for swapping of timelevels for respective quantity REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: e_2 !< pointer for swapping of timelevels for respective quantity REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: e_3 !< pointer for swapping of timelevels for respective quantity REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: p !< pointer: perturbation pressure REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: prho_1 !< pointer for swapping of timelevels for respective quantity REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: nc_1 !< pointer for swapping of timelevels for respective quantity REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: nc_2 !< pointer for swapping of timelevels for respective quantity REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: nc_3 !< pointer for swapping of timelevels for respective quantity REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: nr_1 !< pointer for swapping of timelevels for respective quantity REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: nr_2 !< pointer for swapping of timelevels for respective quantity REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: nr_3 !< pointer for swapping of timelevels for respective quantity REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: pt_1 !< pointer for swapping of timelevels for respective quantity REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: pt_2 !< pointer for swapping of timelevels for respective quantity REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: pt_3 !< pointer for swapping of timelevels for respective quantity REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: q_1 !< pointer for swapping of timelevels for respective quantity REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: q_2 !< pointer for swapping of timelevels for respective quantity REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: q_3 !< pointer for swapping of timelevels for respective quantity REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: qc_1 !< pointer for swapping of timelevels for respective quantity REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: qc_2 !< pointer for swapping of timelevels for respective quantity REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: qc_3 !< pointer for swapping of timelevels for respective quantity REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: ql_v !< pointer: volume of liquid water REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: ql_vp !< pointer: liquid water weighting factor REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: ql_1 !< pointer for swapping of timelevels for respective quantity REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: ql_2 !< pointer for swapping of timelevels for respective quantity REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: qr_1 !< pointer for swapping of timelevels for respective quantity REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: qr_2 !< pointer for swapping of timelevels for respective quantity REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: qr_3 !< pointer for swapping of timelevels for respective quantity REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: rho_1 !< pointer for swapping of timelevels for respective quantity REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: s_1 !< pointer for swapping of timelevels for respective quantity REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: s_2 !< pointer for swapping of timelevels for respective quantity REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: s_3 !< pointer for swapping of timelevels for respective quantity REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: sa_1 !< pointer for swapping of timelevels for respective quantity REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: sa_2 !< pointer for swapping of timelevels for respective quantity REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: sa_3 !< pointer for swapping of timelevels for respective quantity REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: u_1 !< pointer for swapping of timelevels for respective quantity REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: u_2 !< pointer for swapping of timelevels for respective quantity REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: u_3 !< pointer for swapping of timelevels for respective quantity REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: v_1 !< pointer for swapping of timelevels for respective quantity REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: v_2 !< pointer for swapping of timelevels for respective quantity REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: v_3 !< pointer for swapping of timelevels for respective quantity REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: vpt_1 !< pointer for swapping of timelevels for respective quantity REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: w_1 !< pointer for swapping of timelevels for respective quantity REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: w_2 !< pointer for swapping of timelevels for respective quantity REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: w_3 !< pointer for swapping of timelevels for respective quantity REAL(wp), DIMENSION(:,:,:), POINTER :: e !< pointer: subgrid-scale turbulence kinetic energy (sgs tke) REAL(wp), DIMENSION(:,:,:), POINTER :: e_p !< pointer: prognostic value of sgs tke REAL(wp), DIMENSION(:,:,:), POINTER :: nc !< pointer: cloud drop number density REAL(wp), DIMENSION(:,:,:), POINTER :: nc_p !< pointer: prognostic value of cloud drop number density REAL(wp), DIMENSION(:,:,:), POINTER :: nr !< pointer: rain drop number density REAL(wp), DIMENSION(:,:,:), POINTER :: nr_p !< pointer: prognostic value of rain drop number density REAL(wp), DIMENSION(:,:,:), POINTER :: prho !< pointer: potential density REAL(wp), DIMENSION(:,:,:), POINTER :: pt !< pointer: potential temperature REAL(wp), DIMENSION(:,:,:), POINTER :: pt_p !< pointer: prognostic value of potential temperature REAL(wp), DIMENSION(:,:,:), POINTER :: q !< pointer: specific humidity REAL(wp), DIMENSION(:,:,:), POINTER :: q_p !< pointer: prognostic value of specific humidity REAL(wp), DIMENSION(:,:,:), POINTER :: qc !< pointer: cloud water content REAL(wp), DIMENSION(:,:,:), POINTER :: qc_p !< pointer: cloud water content REAL(wp), DIMENSION(:,:,:), POINTER :: ql !< pointer: liquid water content REAL(wp), DIMENSION(:,:,:), POINTER :: ql_c !< pointer: change in liquid water content due to !< condensation/evaporation during last time step REAL(wp), DIMENSION(:,:,:), POINTER :: qr !< pointer: rain water content REAL(wp), DIMENSION(:,:,:), POINTER :: qr_p !< pointer: prognostic value of rain water content REAL(wp), DIMENSION(:,:,:), POINTER :: rho_ocean !< pointer: density of ocean REAL(wp), DIMENSION(:,:,:), POINTER :: s !< pointer: passive scalar REAL(wp), DIMENSION(:,:,:), POINTER :: s_p !< pointer: prognostic value of passive scalar REAL(wp), DIMENSION(:,:,:), POINTER :: sa !< pointer: ocean salinity REAL(wp), DIMENSION(:,:,:), POINTER :: sa_p !< pointer: prognostic value of ocean salinity REAL(wp), DIMENSION(:,:,:), POINTER :: te_m !< pointer: weighted tendency of e for previous sub-timestep (Runge-Kutta) REAL(wp), DIMENSION(:,:,:), POINTER :: tnc_m !< pointer: weighted tendency of nc for previous sub-timestep (Runge-Kutta) REAL(wp), DIMENSION(:,:,:), POINTER :: tnr_m !< pointer: weighted tendency of nr for previous sub-timestep (Runge-Kutta) REAL(wp), DIMENSION(:,:,:), POINTER :: tpt_m !< pointer: weighted tendency of pt for previous sub-timestep (Runge-Kutta) REAL(wp), DIMENSION(:,:,:), POINTER :: tq_m !< pointer: weighted tendency of q for previous sub-timestep (Runge-Kutta) REAL(wp), DIMENSION(:,:,:), POINTER :: tqc_m !< pointer: weighted tendency of qc for previous sub-timestep (Runge-Kutta) REAL(wp), DIMENSION(:,:,:), POINTER :: tqr_m !< pointer: weighted tendency of qr for previous sub-timestep (Runge-Kutta) REAL(wp), DIMENSION(:,:,:), POINTER :: ts_m !< pointer: weighted tendency of s for previous sub-timestep (Runge-Kutta) REAL(wp), DIMENSION(:,:,:), POINTER :: tsa_m !< pointer: weighted tendency of sa for previous sub-timestep (Runge-Kutta) REAL(wp), DIMENSION(:,:,:), POINTER :: tu_m !< pointer: weighted tendency of u for previous sub-timestep (Runge-Kutta) REAL(wp), DIMENSION(:,:,:), POINTER :: tv_m !< pointer: weighted tendency of v for previous sub-timestep (Runge-Kutta) REAL(wp), DIMENSION(:,:,:), POINTER :: tw_m !< pointer: weighted tendency of w for previous sub-timestep (Runge-Kutta) REAL(wp), DIMENSION(:,:,:), POINTER :: u !< pointer: horizontal velocity component u (x-direction) REAL(wp), DIMENSION(:,:,:), POINTER :: u_p !< pointer: prognostic value of u REAL(wp), DIMENSION(:,:,:), POINTER :: v !< pointer: horizontal velocity component v (y-direction) REAL(wp), DIMENSION(:,:,:), POINTER :: v_p !< pointer: prognostic value of v REAL(wp), DIMENSION(:,:,:), POINTER :: vpt !< pointer: virtual potential temperature REAL(wp), DIMENSION(:,:,:), POINTER :: w !< pointer: vertical velocity component w (z-direction) REAL(wp), DIMENSION(:,:,:), POINTER :: w_p !< pointer: prognostic value of w #endif REAL(wp), DIMENSION(:,:,:,:), ALLOCATABLE :: tri !< Siggi REAL(wp), DIMENSION(:), ALLOCATABLE :: rho_air !< air density profile on the uv grid REAL(wp), DIMENSION(:), ALLOCATABLE :: rho_air_zw !< air density profile on the w grid REAL(wp), DIMENSION(:), ALLOCATABLE :: drho_air !< inverse air density profile on the uv grid REAL(wp), DIMENSION(:), ALLOCATABLE :: drho_air_zw !< inverse air density profile on the w grid REAL(wp), DIMENSION(:,:), ALLOCATABLE :: rho_air_mg !< air density profiles on the uv grid for multigrid REAL(wp), DIMENSION(:,:), ALLOCATABLE :: rho_air_zw_mg !< air density profiles on the w grid for multigrid REAL(wp), DIMENSION(:), ALLOCATABLE :: heatflux_input_conversion !< conversion factor array for heatflux input REAL(wp), DIMENSION(:), ALLOCATABLE :: waterflux_input_conversion !< conversion factor array for waterflux input REAL(wp), DIMENSION(:), ALLOCATABLE :: momentumflux_input_conversion !< conversion factor array for momentumflux input REAL(wp), DIMENSION(:), ALLOCATABLE :: heatflux_output_conversion !< conversion factor array for heatflux output REAL(wp), DIMENSION(:), ALLOCATABLE :: waterflux_output_conversion !< conversion factor array for waterflux output REAL(wp), DIMENSION(:), ALLOCATABLE :: momentumflux_output_conversion !< conversion factor array for momentumflux output SAVE END MODULE arrays_3d !------------------------------------------------------------------------------! ! Description: ! ------------ !> Definition of variables needed for time-averaging of 2d/3d data. !------------------------------------------------------------------------------! MODULE averaging USE kinds REAL(wp), DIMENSION(:,:), ALLOCATABLE :: lwp_av !< avg. liquid water path REAL(wp), DIMENSION(:,:), ALLOCATABLE :: precipitation_rate_av !< avg. precipitation rate REAL(wp), DIMENSION(:,:), ALLOCATABLE :: ol_av !< avg. Obukhov length REAL(wp), DIMENSION(:,:), ALLOCATABLE :: qsws_av !< avg. surface moisture flux REAL(wp), DIMENSION(:,:), ALLOCATABLE :: ssws_av !< avg. surface scalar flux REAL(wp), DIMENSION(:,:), ALLOCATABLE :: shf_av !< avg. surface heat flux REAL(wp), DIMENSION(:,:), ALLOCATABLE :: ts_av !< avg. characteristic temperature scale REAL(wp), DIMENSION(:,:), ALLOCATABLE :: us_av !< avg. friction velocity REAL(wp), DIMENSION(:,:), ALLOCATABLE :: z0_av !< avg. roughness length for momentum REAL(wp), DIMENSION(:,:), ALLOCATABLE :: z0h_av !< avg. roughness length for heat REAL(wp), DIMENSION(:,:), ALLOCATABLE :: z0q_av !< avg. roughness length for moisture REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: e_av !< avg. subgrid-scale tke REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: lpt_av !< avg. liquid water potential temperature REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: nc_av !< avg. cloud drop number density REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: nr_av !< avg. rain drop number density REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: p_av !< avg. perturbation pressure REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: pc_av !< avg. particle/droplet concentration REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: pr_av !< avg. particle/droplet radius REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: prr_av !< avg. precipitation rate REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: pt_av !< avg. potential temperature REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: q_av !< avg. specific humidity !< (or total water content with active cloud physics) REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: qc_av !< avg. cloud water content REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: ql_av !< avg. liquid water content REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: ql_c_av !< avg. change in liquid water content due to !< condensation/evaporation during last time step REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: ql_v_av !< avg. volume of liquid water REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: ql_vp_av !< avg. liquid water weighting factor REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: qr_av !< avg. rain water content REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: qv_av !< avg. water vapor content (specific humidity) REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: rho_ocean_av !< avg. ocean density REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: s_av !< avg. passive scalar REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: sa_av !< avg. salinity REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: u_av !< avg. horizontal velocity component u REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: v_av !< avg. horizontal velocity component v REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: vpt_av !< avg. virtual potential temperature REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: w_av !< avg. vertical velocity component END MODULE averaging !------------------------------------------------------------------------------! ! Description: ! ------------ !> Definition of variables and constants for cloud physics. !------------------------------------------------------------------------------! MODULE cloud_parameters USE kinds REAL(wp) :: cp = 1005.0_wp !< heat capacity of dry air (J kg-1 K-1) REAL(wp) :: l_v = 2.5E+06_wp !< latent heat of vaporization (J kg-1) REAL(wp) :: l_d_cp !< l_v / cp REAL(wp) :: l_d_r !< l_v / r_d REAL(wp) :: l_d_rv !< l_v / r_v REAL(wp) :: rho_l = 1.0E3_wp !< density of water (kg m-3) REAL(wp) :: r_d = 287.0_wp !< sp. gas const. dry air (J kg-1 K-1) REAL(wp) :: r_v = 461.51_wp !< sp. gas const. water vapor (J kg-1 K-1) REAL(wp), DIMENSION(:), ALLOCATABLE :: hyrho !< density of air calculated with hydrostatic pressure REAL(wp), DIMENSION(:), ALLOCATABLE :: pt_d_t !< ratio of potential and actual temperature REAL(wp), DIMENSION(:), ALLOCATABLE :: t_d_pt !< ratio of actual and potential temperature SAVE END MODULE cloud_parameters !------------------------------------------------------------------------------! ! Description: ! ------------ !> Definition of general constants. !------------------------------------------------------------------------------! MODULE constants USE kinds REAL(wp) :: pi = 3.141592654_wp !< PI REAL(wp) :: adv_mom_1 !< 1/4 - constant used in 5th-order advection scheme for momentum advection (1st-order part) REAL(wp) :: adv_mom_3 !< 1/24 - constant used in 5th-order advection scheme for momentum advection (3rd-order part) REAL(wp) :: adv_mom_5 !< 1/120 - constant used in 5th-order advection scheme for momentum advection (5th-order part) REAL(wp) :: adv_sca_1 !< 1/2 - constant used in 5th-order advection scheme for scalar advection (1st-order part) REAL(wp) :: adv_sca_3 !< 1/12 - constant used in 5th-order advection scheme for scalar advection (3rd-order part) REAL(wp) :: adv_sca_5 !< 1/60 - constant used in 5th-order advection scheme for scalar advection (5th-order part) SAVE END MODULE constants !------------------------------------------------------------------------------! ! Description: ! ------------ !> Definition of parameters for program control !------------------------------------------------------------------------------! MODULE control_parameters USE kinds TYPE plot_precision CHARACTER (LEN=8) :: variable !< Siggi INTEGER(iwp) :: precision !< Siggi END TYPE plot_precision TYPE(plot_precision), DIMENSION(100) :: plot_3d_precision = & !< Siggi (/ plot_precision( 'u', 2 ), plot_precision( 'v', 2 ), & plot_precision( 'w', 2 ), plot_precision( 'p', 5 ), & plot_precision( 'pt', 2 ), & ( plot_precision( ' ', 1 ), i9 = 1,95 ) /) TYPE file_status LOGICAL :: opened !< Siggi LOGICAL :: opened_before !< Siggi END TYPE file_status INTEGER, PARAMETER :: mask_xyz_dimension = 100 !< limit of mask dimensions (100 points in each direction) INTEGER, PARAMETER :: max_masks = 50 !< maximum number of masks INTEGER(iwp), PARAMETER :: varnamelength = 30 !< length of output variable names TYPE(file_status), DIMENSION(200+2*max_masks) :: & !< Siggi openfile = file_status(.FALSE.,.FALSE.) CHARACTER (LEN=1) :: cycle_mg = 'w' !< namelist parameter (see documentation) CHARACTER (LEN=1) :: timestep_reason = ' ' !< 'A'dvection or 'D'iffusion criterion, written to RUN_CONTROL file CHARACTER (LEN=3) :: coupling_char = '' !< Siggi CHARACTER (LEN=5) :: write_binary = 'false' !< internal namelist parameter Siggi--> Why is this not a flag? CHARACTER (LEN=8) :: most_method = 'newton' !< namelist parameter CHARACTER (LEN=8) :: run_date !< date of simulation run, printed to HEADER file CHARACTER (LEN=8) :: run_time !< time of simulation run, printed to HEADER file CHARACTER (LEN=9) :: simulated_time_chr !< simulated time, printed to RUN_CONTROL file CHARACTER (LEN=11) :: topography_grid_convention = ' ' !< namelist parameter CHARACTER (LEN=12) :: version = ' ' !< PALM version number CHARACTER (LEN=12) :: revision = ' ' !< PALM revision number CHARACTER (LEN=12) :: user_interface_current_revision = ' ' !< Siggi CHARACTER (LEN=12) :: user_interface_required_revision = ' ' !< Siggi CHARACTER (LEN=16) :: conserve_volume_flow_mode = 'default' !< namelist parameter CHARACTER (LEN=16) :: loop_optimization = 'default' !< namelist parameter CHARACTER (LEN=16) :: momentum_advec = 'ws-scheme' !< namelist parameter CHARACTER (LEN=16) :: psolver = 'poisfft' !< namelist parameter CHARACTER (LEN=16) :: scalar_advec = 'ws-scheme' !< namelist parameter CHARACTER (LEN=20) :: approximation = 'boussinesq' !< namelist parameter CHARACTER (LEN=40) :: flux_input_mode = 'approximation-specific' !< type of flux input: dynamic or kinematic CHARACTER (LEN=40) :: flux_output_mode = 'approximation-specific' !< type of flux output: dynamic or kinematic CHARACTER (LEN=20) :: bc_e_b = 'neumann' !< namelist parameter CHARACTER (LEN=20) :: bc_lr = 'cyclic' !< namelist parameter CHARACTER (LEN=20) :: bc_ns = 'cyclic' !< namelist parameter CHARACTER (LEN=20) :: bc_p_b = 'neumann' !< namelist parameter CHARACTER (LEN=20) :: bc_p_t = 'dirichlet' !< namelist parameter CHARACTER (LEN=20) :: bc_pt_b = 'dirichlet' !< namelist parameter CHARACTER (LEN=20) :: bc_pt_t = 'initial_gradient' !< namelist parameter CHARACTER (LEN=20) :: bc_q_b = 'dirichlet' !< namelist parameter CHARACTER (LEN=20) :: bc_q_t = 'neumann' !< namelist parameter CHARACTER (LEN=20) :: bc_s_b = 'dirichlet' !< namelist parameter CHARACTER (LEN=20) :: bc_s_t = 'initial_gradient' !< namelist parameter CHARACTER (LEN=20) :: bc_sa_t = 'neumann' !< namelist parameter CHARACTER (LEN=20) :: bc_uv_b = 'dirichlet' !< namelist parameter CHARACTER (LEN=20) :: bc_uv_t = 'dirichlet' !< namelist parameter CHARACTER (LEN=20) :: cloud_scheme = 'saturation_adjust' !< namelist parameter CHARACTER (LEN=20) :: coupling_mode = 'uncoupled' !< coupling mode for atmosphere-ocean coupling CHARACTER (LEN=20) :: coupling_mode_remote = 'uncoupled' !< Siggi CHARACTER (LEN=20) :: dissipation_1d = 'detering' !< namelist parameter CHARACTER (LEN=20) :: fft_method = 'system-specific' !< namelist parameter CHARACTER (LEN=20) :: mixing_length_1d = 'blackadar' !< namelist parameter CHARACTER (LEN=20) :: random_generator = 'random-parallel' !< namelist parameter CHARACTER (LEN=20) :: reference_state = 'initial_profile' !< namelist parameter CHARACTER (LEN=20) :: return_addres !< Siggi CHARACTER (LEN=20) :: return_username !< Siggi CHARACTER (LEN=20) :: timestep_scheme = 'runge-kutta-3' !< namelist parameter CHARACTER (LEN=40) :: avs_data_file !< Siggi CHARACTER (LEN=40) :: topography = 'flat' !< namelist parameter CHARACTER (LEN=64) :: host = ' ' !< Siggi CHARACTER (LEN=80) :: log_message !< Siggi CHARACTER (LEN=80) :: run_identifier !< Siggi CHARACTER (LEN=100) :: initializing_actions = ' ' !< namelist parameter CHARACTER (LEN=210) :: run_description_header !< Siggi CHARACTER (LEN=1000) :: message_string = ' ' !< dynamic string for error message output CHARACTER (LEN=varnamelength), DIMENSION(500) :: data_output = ' ' !< namelist parameter CHARACTER (LEN=varnamelength), DIMENSION(500) :: data_output_user = ' ' !< namelist parameter CHARACTER (LEN=varnamelength), DIMENSION(500) :: doav = ' ' !< label array for multi-dimensional, !< averaged output quantities CHARACTER (LEN=varnamelength), DIMENSION(max_masks,100) :: data_output_masks = ' ' !< namelist parameter CHARACTER (LEN=varnamelength), DIMENSION(max_masks,100) :: data_output_masks_user = ' ' !< namelist parameter CHARACTER (LEN=varnamelength), DIMENSION(300) :: data_output_pr = ' ' !< namelist parameter CHARACTER (LEN=varnamelength), DIMENSION(200) :: data_output_pr_user = ' ' !< namelist parameter CHARACTER (LEN=varnamelength), DIMENSION(max_masks,0:1,100) :: domask = ' ' !< label array for multi-dimensional, !< masked output quantities CHARACTER (LEN=varnamelength), DIMENSION(0:1,500) :: do2d = ' ' !< label array for 2d output quantities CHARACTER (LEN=varnamelength), DIMENSION(0:1,500) :: do3d = ' ' !< label array for 3d output quantities INTEGER(iwp), PARAMETER :: fl_max = 100 !< maximum number of virtual-flight measurements INTEGER(iwp), PARAMETER :: var_fl_max = 20 !< maximum number of different sampling variables in virtual flight measurements INTEGER(iwp) :: abort_mode = 1 !< abort condition (nested runs) INTEGER(iwp) :: average_count_pr = 0 !< number of samples in vertical-profile output INTEGER(iwp) :: average_count_3d = 0 !< number of samples in 3d output INTEGER(iwp) :: current_timestep_number = 0 !< current timestep number, printed to RUN_CONTROL file INTEGER(iwp) :: coupling_topology = 0 !< processor topology for atmosphere-ocean coupling Siggi INTEGER(iwp) :: dist_range = 0 !< Siggi INTEGER(iwp) :: disturbance_level_ind_b !< lowest grid index where flow disturbance is applied INTEGER(iwp) :: disturbance_level_ind_t !< highest grid index where flow disturbance is applied INTEGER(iwp) :: doav_n = 0 !< number of 2d/3d output quantities subject to time averaging INTEGER(iwp) :: dopr_n = 0 !< number of profile output quantities subject to time averaging INTEGER(iwp) :: dopr_time_count = 0 !< number of output intervals for profile output INTEGER(iwp) :: dopts_time_count = 0 !< number of output intervals for particle data timeseries INTEGER(iwp) :: dots_time_count = 0 !< number of output intervals for timeseries output INTEGER(iwp) :: dp_level_ind_b = 0 !< lowest grid index for external pressure gradient forcing INTEGER(iwp) :: dvrp_filecount = 0 !< Siggi INTEGER(iwp) :: dz_stretch_level_index !< Siggi INTEGER(iwp) :: ensemble_member_nr = 0 !< namelist parameter INTEGER(iwp) :: gamma_mg !< Siggi INTEGER(iwp) :: gathered_size !< Siggi INTEGER(iwp) :: grid_level !< Siggi INTEGER(iwp) :: ibc_e_b !< integer flag for bc_e_b INTEGER(iwp) :: ibc_p_b !< integer flag for bc_p_b INTEGER(iwp) :: ibc_p_t !< integer flag for bc_p_t INTEGER(iwp) :: ibc_pt_b !< integer flag for bc_pt_b INTEGER(iwp) :: ibc_pt_t !< integer flag for bc_pt_t INTEGER(iwp) :: ibc_q_b !< integer flag for bc_q_b INTEGER(iwp) :: ibc_q_t !< integer flag for bc_q_t INTEGER(iwp) :: ibc_s_b !< integer flag for bc_s_b INTEGER(iwp) :: ibc_s_t !< integer flag for bc_s_t INTEGER(iwp) :: ibc_sa_t !< integer flag for bc_sa_t INTEGER(iwp) :: ibc_uv_b !< integer flag for bc_uv_b INTEGER(iwp) :: ibc_uv_t !< integer flag for bc_uv_t INTEGER(iwp) :: inflow_disturbance_begin = -1 !< namelist parameter INTEGER(iwp) :: inflow_disturbance_end = -1 !< namelist parameter INTEGER(iwp) :: intermediate_timestep_count !< number of current Runge-Kutta substep INTEGER(iwp) :: intermediate_timestep_count_max !< maximum number of Runge-Kutta substeps INTEGER(iwp) :: io_group = 0 !< Siggi INTEGER(iwp) :: io_blocks = 1 !< Siggi INTEGER(iwp) :: iran = -1234567 !< integer random number used for flow disturbances INTEGER(iwp) :: lod = 1 !< level of detail, topography input parameter INTEGER(iwp) :: masks = 0 !< counter for number of masked output quantities INTEGER(iwp) :: maximum_grid_level !< Siggi INTEGER(iwp) :: maximum_parallel_io_streams = -1 !< Siggi INTEGER(iwp) :: max_pr_user = 0 !< number of user-defined profiles (must not change within a job chain) INTEGER(iwp) :: mgcycles = 0 !< Siggi INTEGER(iwp) :: mg_cycles = -1 !< namelist parameter INTEGER(iwp) :: mg_switch_to_pe0_level = -1 !< namelist parameter INTEGER(iwp) :: mid !< masked output running index INTEGER(iwp) :: nlsf = 1000 !< maximum number of profiles in LSF_DATA (large scale forcing) INTEGER(iwp) :: ntnudge = 1000 !< maximum number of profiles in NUDGING_DATA (nudging) INTEGER(iwp) :: ngsrb = 2 !< namelist parameter INTEGER(iwp) :: nr_timesteps_this_run = 0 !< number of timesteps (cpu time measurements) INTEGER(iwp) :: nsor = 20 !< namelist parameter INTEGER(iwp) :: nsor_ini = 100 !< namelist parameter INTEGER(iwp) :: n_sor !< number of iterations to be used in SOR-scheme INTEGER(iwp) :: normalizing_region = 0 !< namelist parameter INTEGER(iwp) :: num_leg=0 !< number of different legs in virtual flight measurements INTEGER(iwp) :: num_var_fl !< number of sampling/output variables in virtual flight measurements INTEGER(iwp) :: num_var_fl_user=0 !< number of user-defined sampling/output variables in virtual flight measurements INTEGER(iwp) :: nz_do3d = -9999 !< namelist parameter INTEGER(iwp) :: prt_time_count = 0 !< number of output intervals for particle data output INTEGER(iwp) :: recycling_plane !< position of recycling plane along x (in grid points) in case of turbulence recycling INTEGER(iwp) :: runnr = 0 !< number of run in job chain INTEGER(iwp) :: subdomain_size !< number of grid points in (3d) subdomain including ghost points INTEGER(iwp) :: terminate_coupled = 0 !< Siggi INTEGER(iwp) :: terminate_coupled_remote = 0 !< Siggi INTEGER(iwp) :: timestep_count = 0 !< Siggi --> is it not analogue to intermediate_timestep_count INTEGER(iwp) :: dist_nxl(0:1) !< left boundary of disturbance region INTEGER(iwp) :: dist_nxr(0:1) !< right boundary of disturbance region INTEGER(iwp) :: dist_nyn(0:1) !< north boundary of disturbance region INTEGER(iwp) :: dist_nys(0:1) !< south boundary of disturbance region INTEGER(iwp) :: do2d_no(0:1) = 0 !< number of 2d output quantities INTEGER(iwp) :: do2d_xy_time_count(0:1) !< number of output intervals for 2d data (xy) INTEGER(iwp) :: do2d_xz_time_count(0:1) !< number of output intervals for 2d data (xz) INTEGER(iwp) :: do2d_yz_time_count(0:1) !< number of output intervals for 2d data (yz) INTEGER(iwp) :: do3d_no(0:1) = 0 !< number of 3d output quantities INTEGER(iwp) :: do3d_time_count(0:1) !< number of output intervals for 3d data INTEGER(iwp) :: domask_no(max_masks,0:1) = 0 !< number of masked output quantities INTEGER(iwp) :: domask_time_count(max_masks,0:1) !< number of output intervals for masked data INTEGER(iwp) :: mask_size(max_masks,3) = -1 !< size of mask array per mask and dimension (for netcdf output) INTEGER(iwp) :: mask_size_l(max_masks,3) = -1 !< subdomain size of mask array per mask and dimension (for netcdf output) INTEGER(iwp) :: mask_start_l(max_masks,3) = -1 !< subdomain start index of mask array (for netcdf output) INTEGER(iwp) :: pt_vertical_gradient_level_ind(10) = -9999 !< grid index values of pt_vertical_gradient_level(s) INTEGER(iwp) :: q_vertical_gradient_level_ind(10) = -9999 !< grid index values of q_vertical_gradient_level(s) INTEGER(iwp) :: s_vertical_gradient_level_ind(10) = -9999 !< grid index values of s_vertical_gradient_level(s) INTEGER(iwp) :: sa_vertical_gradient_level_ind(10) = -9999 !< grid index values of sa_vertical_gradient_level(s) INTEGER(iwp) :: section(100,3) !< collective array for section_xy/xz/yz INTEGER(iwp) :: section_xy(100) = -9999 !< namelist parameter INTEGER(iwp) :: section_xz(100) = -9999 !< namelist parameter INTEGER(iwp) :: section_yz(100) = -9999 !< namelist parameter INTEGER(iwp) :: ug_vertical_gradient_level_ind(10) = -9999 !< grid index values of ug_vertical_gradient_level(s) INTEGER(iwp) :: vg_vertical_gradient_level_ind(10) = -9999 !< grid index values of vg_vertical_gradient_level(s) INTEGER(iwp) :: subs_vertical_gradient_level_i(10) = -9999 !< grid index values of subs_vertical_gradient_level(s) INTEGER(iwp), DIMENSION(0:1) :: ntdim_2d_xy !< number of output intervals for 2d data (xy) INTEGER(iwp), DIMENSION(0:1) :: ntdim_2d_xz !< number of output intervals for 2d data (xz) INTEGER(iwp), DIMENSION(0:1) :: ntdim_2d_yz !< number of output intervals for 2d data (yz) INTEGER(iwp), DIMENSION(0:1) :: ntdim_3d !< number of output intervals for 3d data INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: grid_level_count !< Siggi INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: mask_i !< subdomain grid index of masked output point on x-dimension INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: mask_j !< subdomain grid index of masked output point on y-dimension INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: mask_k !< subdomain grid index of masked output point on z-dimension INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: mask_i_global !< global grid index of masked output point on x-dimension INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: mask_j_global !< global grid index of masked output point on y-dimension INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: mask_k_global !< global grid index of masked output point on z-dimension LOGICAL :: bc_lr_cyc =.TRUE. !< left-right boundary condition cyclic? LOGICAL :: bc_lr_dirrad = .FALSE. !< left-right boundary condition dirichlet/radiation? LOGICAL :: bc_lr_raddir = .FALSE. !< left-right boundary condition radiation/dirichlet? LOGICAL :: bc_ns_cyc = .TRUE. !< north-south boundary condition cyclic? LOGICAL :: bc_ns_dirrad = .FALSE. !< north-south boundary condition dirichlet/radiation? LOGICAL :: bc_ns_raddir = .FALSE. !< north-south boundary condition radiation/dirichlet? LOGICAL :: call_microphysics_at_all_substeps = .FALSE. !< namelist parameter LOGICAL :: call_psolver_at_all_substeps = .TRUE. !< namelist parameter LOGICAL :: cloud_droplets = .FALSE. !< namelist parameter LOGICAL :: cloud_physics = .FALSE. !< namelist parameter LOGICAL :: cloud_top_radiation = .FALSE. !< namelist parameter LOGICAL :: conserve_volume_flow = .FALSE. !< namelist parameter LOGICAL :: constant_diffusion = .FALSE. !< diffusion coefficient constant? LOGICAL :: constant_flux_layer = .TRUE. !< namelist parameter LOGICAL :: constant_heatflux = .TRUE. !< heat flux at all surfaces constant? LOGICAL :: constant_top_heatflux = .TRUE. !< heat flux at domain top constant? LOGICAL :: constant_top_momentumflux = .FALSE. !< momentum flux at domain topconstant? LOGICAL :: constant_top_salinityflux = .TRUE. !< salinity flux at ocean domain top? LOGICAL :: constant_top_scalarflux = .TRUE. !< passive-scalar flux at domain top constant? LOGICAL :: constant_scalarflux = .TRUE. !< passive-scalar flux at surfaces constant? LOGICAL :: constant_waterflux = .TRUE. !< water flux at all surfaces constant? LOGICAL :: create_disturbances = .TRUE. !< namelist parameter LOGICAL :: data_output_during_spinup = .FALSE. !< namelist parameter LOGICAL :: data_output_2d_on_each_pe = .TRUE. !< namelist parameter LOGICAL :: disturbance_created = .FALSE. !< flow disturbance imposed? LOGICAL :: do2d_at_begin = .FALSE. !< namelist parameter LOGICAL :: do3d_at_begin = .FALSE. !< namelist parameter LOGICAL :: do_sum = .FALSE. !< contribute to time average of profile data? LOGICAL :: dp_external = .FALSE. !< namelist parameter LOGICAL :: dp_smooth = .FALSE. !< namelist parameter LOGICAL :: dt_fixed = .FALSE. !< fixed timestep (namelist parameter dt set)? LOGICAL :: dt_3d_reached !< internal timestep for particle advection LOGICAL :: dt_3d_reached_l !< internal timestep for particle advection LOGICAL :: exchange_mg = .FALSE. !< (Siggi add short description) LOGICAL :: first_call_lpm = .TRUE. !< call lpm only once per timestep? LOGICAL :: force_print_header = .FALSE. !< namelist parameter LOGICAL :: galilei_transformation = .FALSE. !< namelist parameter LOGICAL :: humidity = .FALSE. !< namelist parameter LOGICAL :: humidity_remote = .FALSE. !< (Siggi add short description) LOGICAL :: inflow_l = .FALSE. !< left domain boundary has non-cyclic inflow? LOGICAL :: inflow_n = .FALSE. !< north domain boundary has non-cyclic inflow? LOGICAL :: inflow_r = .FALSE. !< right domain boundary has non-cyclic inflow? LOGICAL :: inflow_s = .FALSE. !< south domain boundary has non-cyclic inflow? LOGICAL :: large_scale_forcing = .FALSE. !< namelist parameter LOGICAL :: large_scale_subsidence = .FALSE. !< namelist parameter LOGICAL :: land_surface = .FALSE. !< use land surface model? LOGICAL :: lsf_exception = .FALSE. !< use of lsf with buildings (temporary)? LOGICAL :: lsf_surf = .TRUE. !< use surface forcing (large scale forcing)? LOGICAL :: lsf_vert = .TRUE. !< use atmospheric forcing (large scale forcing)? LOGICAL :: masking_method = .FALSE. !< namelist parameter LOGICAL :: microphysics_sat_adjust = .FALSE. !< use saturation adjust bulk scheme? LOGICAL :: microphysics_kessler = .FALSE. !< use kessler bulk scheme? LOGICAL :: microphysics_morrison = .FALSE. !< use 2-moment Morrison (add. prog. eq. for nc and qc) LOGICAL :: microphysics_seifert = .FALSE. !< use 2-moment Seifert and Beheng scheme LOGICAL :: mg_switch_to_pe0 = .FALSE. !< (Siggi add short description) LOGICAL :: nest_bound_l = .FALSE. !< nested boundary on left side? LOGICAL :: nest_bound_n = .FALSE. !< nested boundary on north side? LOGICAL :: nest_bound_r = .FALSE. !< nested boundary on right side? LOGICAL :: nest_bound_s = .FALSE. !< nested boundary on south side? LOGICAL :: nest_domain = .FALSE. !< domain is nested into a parent domain? LOGICAL :: neutral = .FALSE. !< namelist parameter LOGICAL :: nudging = .FALSE. !< namelist parameter LOGICAL :: ocean = .FALSE. !< namelist parameter LOGICAL :: outflow_l = .FALSE. !< left domain boundary has non-cyclic outflow? LOGICAL :: outflow_n = .FALSE. !< north domain boundary has non-cyclic outflow? LOGICAL :: outflow_r = .FALSE. !< right domain boundary has non-cyclic outflow? LOGICAL :: outflow_s = .FALSE. !< south domain boundary has non-cyclic outflow? LOGICAL :: passive_scalar = .FALSE. !< namelist parameter LOGICAL :: precipitation = .FALSE. !< namelist parameter LOGICAL :: random_heatflux = .FALSE. !< namelist parameter LOGICAL :: recycling_yshift = .FALSE. !< namelist parameter LOGICAL :: run_control_header = .FALSE. !< onetime output of RUN_CONTROL header LOGICAL :: run_coupled = .TRUE. !< (Siggi add short description) LOGICAL :: scalar_rayleigh_damping = .TRUE. !< namelist parameter LOGICAL :: sloping_surface = .FALSE. !< use sloped surface? !< (namelist parameter alpha_surface) LOGICAL :: spinup = .FALSE. !< perform model spinup without atmosphere code? LOGICAL :: stop_dt = .FALSE. !< (Siggi add short description) LOGICAL :: synchronous_exchange = .FALSE. !< namelist parameter LOGICAL :: synthetic_turbulence_generator = .FALSE. !< flag for synthetic turbulence generator module LOGICAL :: terminate_run = .FALSE. !< terminate run (cpu-time limit, restarts)? LOGICAL :: transpose_compute_overlap = .FALSE. !< namelist parameter LOGICAL :: turbulent_inflow = .FALSE. !< namelist parameter LOGICAL :: turbulent_outflow = .FALSE. !< namelist parameter LOGICAL :: urban_surface = .FALSE. !< use urban surface model? LOGICAL :: use_cmax = .TRUE. !< namelist parameter LOGICAL :: use_initial_profile_as_reference = .FALSE. !< use of initial profiles as reference state? LOGICAL :: use_prescribed_profile_data = .FALSE. !< use of prescribed wind profiles? !< (namelist parameters u_profile, v_profile) LOGICAL :: use_single_reference_value = .FALSE. !< use of single value as reference state? LOGICAL :: use_subsidence_tendencies = .FALSE. !< namelist parameter LOGICAL :: use_surface_fluxes = .FALSE. !< namelist parameter LOGICAL :: use_top_fluxes = .FALSE. !< namelist parameter LOGICAL :: use_ug_for_galilei_tr = .TRUE. !< namelist parameter LOGICAL :: use_upstream_for_tke = .FALSE. !< namelist parameter LOGICAL :: virtual_flight = .FALSE. !< use virtual flight model? LOGICAL :: wall_adjustment = .TRUE. !< namelist parameter LOGICAL :: ws_scheme_sca = .FALSE. !< use Wicker-Skamarock scheme (scalar advection)? LOGICAL :: ws_scheme_mom = .FALSE. !< use Wicker-Skamarock scheme (momentum advection)? LOGICAL :: data_output_xy(0:1) = .FALSE. !< output of xy cross-section data? LOGICAL :: data_output_xz(0:1) = .FALSE. !< output of xz cross-section data? LOGICAL :: data_output_yz(0:1) = .FALSE. !< output of yz cross-section data? REAL(wp) :: advected_distance_x = 0.0_wp !< advected distance of model domain along x !< (galilei transformation) REAL(wp) :: advected_distance_y = 0.0_wp !< advected distance of model domain along y !< (galilei transformation) REAL(wp) :: alpha_surface = 0.0_wp !< namelist parameter REAL(wp) :: atmos_ocean_sign = 1.0_wp !< vertical-grid conversion factor !< (=1.0 in atmosphere, =-1.0 in ocean) REAL(wp) :: averaging_interval = 0.0_wp !< namelist parameter REAL(wp) :: averaging_interval_pr = 9999999.9_wp !< namelist parameter REAL(wp) :: bc_pt_t_val !< vertical gradient of pt near domain top REAL(wp) :: bc_q_t_val !< vertical gradient of humidity near domain top REAL(wp) :: bc_s_t_val !< vertical gradient of passive scalar near domain top REAL(wp) :: bottom_salinityflux = 0.0_wp !< namelist parameter REAL(wp) :: building_height = 50.0_wp !< namelist parameter REAL(wp) :: building_length_x = 50.0_wp !< namelist parameter REAL(wp) :: building_length_y = 50.0_wp !< namelist parameter REAL(wp) :: building_wall_left = 9999999.9_wp !< namelist parameter REAL(wp) :: building_wall_south = 9999999.9_wp !< namelist parameter REAL(wp) :: canyon_height = 50.0_wp !< namelist parameter REAL(wp) :: canyon_width_x = 9999999.9_wp !< namelist parameter REAL(wp) :: canyon_width_y = 9999999.9_wp !< namelist parameter REAL(wp) :: canyon_wall_left = 9999999.9_wp !< namelist parameter REAL(wp) :: canyon_wall_south = 9999999.9_wp !< namelist parameter REAL(wp) :: cfl_factor = -1.0_wp !< namelist parameter REAL(wp) :: cos_alpha_surface !< cosine of alpha_surface REAL(wp) :: coupling_start_time = 0.0_wp !< namelist parameter REAL(wp) :: disturbance_amplitude = 0.25_wp !< namelist parameter REAL(wp) :: disturbance_energy_limit = 0.01_wp !< namelist parameter REAL(wp) :: disturbance_level_b = -9999999.9_wp !< namelist parameter REAL(wp) :: disturbance_level_t = -9999999.9_wp !< namelist parameter REAL(wp) :: dp_level_b = 0.0_wp !< namelist parameter REAL(wp) :: dt = -1.0_wp !< namelist parameter REAL(wp) :: dt_averaging_input = 0.0_wp !< namelist parameter REAL(wp) :: dt_averaging_input_pr = 9999999.9_wp !< namelist parameter REAL(wp) :: dt_coupling = 9999999.9_wp !< namelist parameter REAL(wp) :: dt_data_output = 9999999.9_wp !< namelist parameter REAL(wp) :: dt_data_output_av = 9999999.9_wp !< namelist parameter REAL(wp) :: dt_disturb = 9999999.9_wp !< namelist parameter REAL(wp) :: dt_dopr = 9999999.9_wp !< namelist parameter REAL(wp) :: dt_dopr_listing = 9999999.9_wp !< namelist parameter REAL(wp) :: dt_dopts = 9999999.9_wp !< namelist parameter REAL(wp) :: dt_dots = 9999999.9_wp !< namelist parameter REAL(wp) :: dt_do2d_xy = 9999999.9_wp !< namelist parameter REAL(wp) :: dt_do2d_xz = 9999999.9_wp !< namelist parameter REAL(wp) :: dt_do2d_yz = 9999999.9_wp !< namelist parameter REAL(wp) :: dt_do3d = 9999999.9_wp !< namelist parameter REAL(wp) :: dt_dvrp = 9999999.9_wp !< namelist parameter REAL(wp) :: dt_max = 20.0_wp !< namelist parameter REAL(wp) :: dt_restart = 9999999.9_wp !< namelist parameter REAL(wp) :: dt_run_control = 60.0_wp !< namelist parameter REAL(wp) :: dt_spinup = 60.0_wp !< namelist parameter REAL(wp) :: dt_3d = 1.0_wp !< time step REAL(wp) :: dz = -1.0_wp !< namelist parameter REAL(wp) :: dz_max = 9999999.9_wp !< namelist parameter REAL(wp) :: dz_stretch_factor = 1.08_wp !< namelist parameter REAL(wp) :: dz_stretch_level = 100000.0_wp !< namelist parameter REAL(wp) :: e_init = 0.0_wp !< namelist parameter REAL(wp) :: e_min = 0.0_wp !< namelist parameter REAL(wp) :: end_time = 0.0_wp !< namelist parameter REAL(wp) :: f = 0.0_wp !< Coriolis parameter REAL(wp) :: fs = 0.0_wp !< Coriolis parameter REAL(wp) :: g = 9.81_wp !< gravitational acceleration REAL(wp) :: inflow_damping_height = 9999999.9_wp !< namelist parameter REAL(wp) :: inflow_damping_width = 9999999.9_wp !< namelist parameter REAL(wp) :: kappa = 0.4_wp !< von Karman constant REAL(wp) :: km_constant = -1.0_wp !< namelist parameter REAL(wp) :: mask_scale_x = 1.0_wp !< namelist parameter REAL(wp) :: mask_scale_y = 1.0_wp !< namelist parameter REAL(wp) :: mask_scale_z = 1.0_wp !< namelist parameter REAL(wp) :: maximum_cpu_time_allowed = 0.0_wp !< given wall time for run REAL(wp) :: molecular_viscosity = 1.461E-5_wp !< molecular viscosity (used in lsm and lpm) REAL(wp) :: old_dt = 1.0E-10_wp !< length of previous timestep REAL(wp) :: omega = 7.29212E-5_wp !< namelist parameter REAL(wp) :: omega_sor = 1.8_wp !< namelist parameter REAL(wp) :: outflow_source_plane = -9999999.9_wp !< namelist parameter REAL(wp) :: particle_maximum_age = 9999999.9_wp !< namelist parameter REAL(wp) :: phi = 55.0_wp !< namelist parameter REAL(wp) :: prandtl_number = 1.0_wp !< namelist parameter REAL(wp) :: precipitation_amount_interval = 9999999.9_wp !< namelist parameter REAL(wp) :: prho_reference !< reference state of potential density REAL(wp) :: pt_damping_factor = 0.0_wp !< namelist parameter REAL(wp) :: pt_damping_width = 0.0_wp !< namelist parameter REAL(wp) :: pt_reference = 9999999.9_wp !< namelist parameter REAL(wp) :: pt_slope_offset = 0.0_wp !< temperature difference between left and right !< boundary of total domain REAL(wp) :: pt_surface = 300.0_wp !< namelist parameter REAL(wp) :: pt_surface_initial_change = 0.0_wp !< namelist parameter REAL(wp) :: q_surface = 0.0_wp !< namelist parameter REAL(wp) :: q_surface_initial_change = 0.0_wp !< namelist parameter REAL(wp) :: rayleigh_damping_factor = -1.0_wp !< namelist parameter REAL(wp) :: rayleigh_damping_height = -1.0_wp !< namelist parameter REAL(wp) :: recycling_width = 9999999.9_wp !< namelist parameter REAL(wp) :: residual_limit = 1.0E-4_wp !< namelist parameter REAL(wp) :: restart_time = 9999999.9_wp !< namelist parameter REAL(wp) :: rho_reference !< reference state of density REAL(wp) :: rho_surface !< surface value of density REAL(wp) :: roughness_length = 0.1_wp !< namelist parameter REAL(wp) :: sa_surface = 35.0_wp !< namelist parameter REAL(wp) :: simulated_time = 0.0_wp !< elapsed simulated time REAL(wp) :: simulated_time_at_begin !< elapsed simulated time of previous run (job chain) REAL(wp) :: sin_alpha_surface !< sine of alpha_surface (sloped surface) REAL(wp) :: skip_time_data_output = 0.0_wp !< namelist parameter REAL(wp) :: skip_time_data_output_av = 9999999.9_wp !< namelist parameter REAL(wp) :: skip_time_dopr = 9999999.9_wp !< namelist parameter REAL(wp) :: skip_time_do2d_xy = 9999999.9_wp !< namelist parameter REAL(wp) :: skip_time_do2d_xz = 9999999.9_wp !< namelist parameter REAL(wp) :: skip_time_do2d_yz = 9999999.9_wp !< namelist parameter REAL(wp) :: skip_time_do3d = 9999999.9_wp !< namelist parameter REAL(wp) :: spinup_pt_amplitude = 9999999.9_wp !< namelist parameter REAL(wp) :: spinup_pt_mean = 9999999.9_wp !< namelist parameter REAL(wp) :: spinup_time = 0.0_wp !< namelist parameter REAL(wp) :: surface_heatflux = 9999999.9_wp !< namelist parameter REAL(wp) :: surface_pressure = 1013.25_wp !< namelist parameter REAL(wp) :: surface_scalarflux = 9999999.9_wp !< namelist parameter REAL(wp) :: surface_waterflux = 9999999.9_wp !< namelist parameter REAL(wp) :: s_surface = 0.0_wp !< namelist parameter REAL(wp) :: s_surface_initial_change = 0.0_wp !< namelist parameter REAL(wp) :: termination_time_needed = -1.0_wp !< namelist parameter REAL(wp) :: time_coupling = 0.0_wp !< time since last coupling (surface_coupler) REAL(wp) :: time_disturb = 0.0_wp !< time since last flow disturbance REAL(wp) :: time_dopr = 0.0_wp !< time since last profile output REAL(wp) :: time_dopr_av = 0.0_wp !< time since last averaged profile output REAL(wp) :: time_dopr_listing = 0.0_wp !< time since last profile output (ASCII) on file REAL(wp) :: time_dopts = 0.0_wp !< time since last particle timeseries output REAL(wp) :: time_dosp = 0.0_wp !< time since last spectra output REAL(wp) :: time_dosp_av = 0.0_wp !< time since last averaged spectra output REAL(wp) :: time_dots = 0.0_wp !< time since last timeseries output REAL(wp) :: time_do2d_xy = 0.0_wp !< time since last xy cross-section output REAL(wp) :: time_do2d_xz = 0.0_wp !< time since last xz cross-section output REAL(wp) :: time_do2d_yz = 0.0_wp !< time since last yz cross-section output REAL(wp) :: time_do3d = 0.0_wp !< time since last 3d output REAL(wp) :: time_do_av = 0.0_wp !< time since last averaged-data output REAL(wp) :: time_do_sla = 0.0_wp !< time since last REAL(wp) :: time_dvrp = 0.0_wp !< time since last dvrp output REAL(wp) :: time_restart = 9999999.9_wp !< time at which run shall be terminated and restarted REAL(wp) :: time_run_control = 0.0_wp !< time since last RUN_CONTROL output REAL(wp) :: time_since_reference_point !< Siggi REAL(wp) :: top_heatflux = 9999999.9_wp !< namelist parameter REAL(wp) :: top_momentumflux_u = 9999999.9_wp !< namelist parameter REAL(wp) :: top_momentumflux_v = 9999999.9_wp !< namelist parameter REAL(wp) :: top_salinityflux = 9999999.9_wp !< namelist parameter REAL(wp) :: top_scalarflux = 9999999.9_wp !< namelist parameter REAL(wp) :: tunnel_height = 9999999.9_wp !< namelist parameter REAL(wp) :: tunnel_length = 9999999.9_wp !< namelist parameter REAL(wp) :: tunnel_width_x = 9999999.9_wp !< namelist parameter REAL(wp) :: tunnel_width_y = 9999999.9_wp !< namelist parameter REAL(wp) :: tunnel_wall_depth = 9999999.9_wp !< namelist parameter REAL(wp) :: ug_surface = 0.0_wp !< namelist parameter REAL(wp) :: u_bulk = 0.0_wp !< namelist parameter REAL(wp) :: u_gtrans = 0.0_wp !< transformed wind component (galilei transformation) REAL(wp) :: vg_surface = 0.0_wp !< namelist parameter REAL(wp) :: vpt_reference = 9999999.9_wp !< reference state of virtual potential temperature REAL(wp) :: v_bulk = 0.0_wp !< namelist parameter REAL(wp) :: v_gtrans = 0.0_wp !< transformed wind component (galilei transformation) REAL(wp) :: wall_adjustment_factor = 1.8_wp !< adjustment factor for mixing length l REAL(wp) :: zeta_max = 20.0_wp !< namelist parameter REAL(wp) :: zeta_min = -20.0_wp !< namelist parameter REAL(wp) :: z_max_do2d = -1.0_wp !< namelist parameter REAL(wp) :: z0h_factor = 1.0_wp !< namelist parameter REAL(wp) :: do2d_xy_last_time(0:1) = -1.0_wp !< time of previous xy output REAL(wp) :: do2d_xz_last_time(0:1) = -1.0_wp !< time of previous xz output REAL(wp) :: do2d_yz_last_time(0:1) = -1.0_wp !< time of previous yz output REAL(wp) :: dpdxy(1:2) = 0.0_wp !< namelist parameter REAL(wp) :: dt_domask(max_masks) = 9999999.9_wp !< namelist parameter REAL(wp) :: mask_scale(3) !< collective array for mask_scale_x/y/z REAL(wp) :: pt_vertical_gradient(10) = 0.0_wp !< namelist parameter REAL(wp) :: pt_vertical_gradient_level(10) = -1.0_wp !< namelist parameter REAL(wp) :: q_vertical_gradient(10) = 0.0_wp !< namelist parameter REAL(wp) :: q_vertical_gradient_level(10) = -1.0_wp !< namelist parameter REAL(wp) :: s_vertical_gradient(10) = 0.0_wp !< namelist parameter REAL(wp) :: s_vertical_gradient_level(10) = -1.0_wp !< namelist parameter REAL(wp) :: sa_vertical_gradient(10) = 0.0_wp !< namelist parameter REAL(wp) :: sa_vertical_gradient_level(10) = -1.0_wp !< namelist parameter REAL(wp) :: skip_time_domask(max_masks) = 9999999.9_wp !< namelist parameter REAL(wp) :: threshold(20) = 0.0_wp !< namelist parameter REAL(wp) :: time_domask(max_masks) = 0.0_wp !< namelist parameter REAL(wp) :: tsc(10) = (/ 1.0_wp, 1.0_wp, 0.0_wp, 0.0_wp, & !< array used for controlling time-integration at different substeps 0.0_wp, 0.0_wp, 0.0_wp, 0.0_wp, 0.0_wp, 0.0_wp /) REAL(wp) :: u_profile(100) = 9999999.9_wp !< namelist parameter REAL(wp) :: uv_heights(100) = 9999999.9_wp !< namelist parameter REAL(wp) :: v_profile(100) = 9999999.9_wp !< namelist parameter REAL(wp) :: ug_vertical_gradient(10) = 0.0_wp !< namelist parameter REAL(wp) :: ug_vertical_gradient_level(10) = -9999999.9_wp !< namelist parameter REAL(wp) :: vg_vertical_gradient(10) = 0.0_wp !< namelist parameter REAL(wp) :: vg_vertical_gradient_level(10) = -9999999.9_wp !< namelist parameter REAL(wp) :: volume_flow(1:3) = 0.0_wp !< Siggi REAL(wp) :: volume_flow_area(1:3) = 0.0_wp !< Siggi REAL(wp) :: volume_flow_initial(1:3) = 0.0_wp !< Siggi REAL(wp) :: wall_heatflux(0:5) = 0.0_wp !< namelist parameter REAL(wp) :: wall_humidityflux(0:5) = 0.0_wp !< namelist parameter REAL(wp) :: wall_salinityflux(0:5) = 0.0_wp !< namelist parameter REAL(wp) :: wall_scalarflux(0:5) = 0.0_wp !< namelist parameter REAL(wp) :: subs_vertical_gradient(10) = 0.0_wp !< namelist parameter REAL(wp) :: subs_vertical_gradient_level(10) = -9999999.9_wp !< namelist parameter REAL(wp), DIMENSION(:), ALLOCATABLE :: dp_smooth_factor !< smoothing factor for external pressure gradient forcing REAL(wp), DIMENSION(max_masks,mask_xyz_dimension) :: mask_x = -1.0_wp !< namelist parameter REAL(wp), DIMENSION(max_masks,mask_xyz_dimension) :: mask_y = -1.0_wp !< namelist parameter REAL(wp), DIMENSION(max_masks,mask_xyz_dimension) :: mask_z = -1.0_wp !< namelist parameter REAL(wp), DIMENSION(max_masks,3) :: mask_x_loop = -1.0_wp !< namelist parameter REAL(wp), DIMENSION(max_masks,3) :: mask_y_loop = -1.0_wp !< namelist parameter REAL(wp), DIMENSION(max_masks,3) :: mask_z_loop = -1.0_wp !< namelist parameter ! !-- internal mask arrays ("mask,dimension,selection") REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: mask !< collective array for mask_x/y/z REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: mask_loop !< collective array for mask_x/y/z_loop SAVE END MODULE control_parameters !------------------------------------------------------------------------------! ! Description: ! ------------ !> Definition of variables used with dvrp-software. !------------------------------------------------------------------------------! MODULE dvrp_variables USE kinds CHARACTER (LEN=10) :: dvrp_output = 'rtsp' !< Siggi (entire MODULE) CHARACTER (LEN=10) :: particle_color = 'none' !< CHARACTER (LEN=10) :: particle_dvrpsize = 'none' !< CHARACTER (LEN=20), DIMENSION(10) :: mode_dvrp = & !< (/ ( ' ', i9 = 1,10 ) /) CHARACTER (LEN=80) :: dvrp_directory = 'default' !< CHARACTER (LEN=80) :: dvrp_file = 'default' !< CHARACTER (LEN=80) :: dvrp_host = 'origin.rvs.uni-hannover.de' !< CHARACTER (LEN=80) :: dvrp_password = '********' !< CHARACTER (LEN=80) :: dvrp_username = ' ' !< INTEGER(iwp) :: cluster_size = 1 !< INTEGER(iwp) :: dvrp_colortable_entries = 4 !< INTEGER(iwp) :: dvrp_colortable_entries_prt = 22 !< INTEGER(iwp) :: islice_dvrp !< INTEGER(iwp) :: nx_dvrp !< INTEGER(iwp) :: nxl_dvrp !< INTEGER(iwp) :: nxr_dvrp !< INTEGER(iwp) :: ny_dvrp !< INTEGER(iwp) :: nyn_dvrp !< INTEGER(iwp) :: nys_dvrp !< INTEGER(iwp) :: nz_dvrp, pathlines_fadeintime = 5 !< INTEGER(iwp) :: pathlines_fadeouttime = 5 !< INTEGER(iwp) :: pathlines_linecount = 1000 !< INTEGER(iwp) :: pathlines_maxhistory = 40 !< INTEGER(iwp) :: pathlines_wavecount = 10 !< INTEGER(iwp) :: pathlines_wavetime = 50 !< INTEGER(iwp) :: vc_gradient_normals = 0 !< INTEGER(iwp) :: vc_mode = 0 !< INTEGER(iwp) :: vc_size_x = 2 !< INTEGER(iwp) :: vc_size_y = 2 !< INTEGER(iwp) :: vc_size_z = 2 !< INTEGER(iwp), DIMENSION(10) :: slicer_position_dvrp !< LOGICAL :: cyclic_dvrp = .FALSE. !< LOGICAL :: dvrp_overlap !< LOGICAL :: dvrp_total_overlap !< LOGICAL :: local_dvrserver_running !< internally set namelist parameter LOGICAL :: lock_steering_update = .FALSE. !< LOGICAL :: use_seperate_pe_for_dvrp_output = .FALSE. !< REAL(wp) :: clip_dvrp_l = 9999999.9_wp !< REAL(wp) :: clip_dvrp_n = 9999999.9_wp !< REAL(wp) :: clip_dvrp_r = 9999999.9_wp !< REAL(wp) :: clip_dvrp_s = 9999999.9_wp !< REAL(wp) :: superelevation = 1.0_wp !< REAL(wp) :: superelevation_x = 1.0_wp !< REAL(wp) :: superelevation_y = 1.0_wp !< REAL(wp) :: vc_alpha = 38.0_wp !< REAL(wp), DIMENSION(2) :: color_interval = (/ 0.0_wp, 1.0_wp /) !< REAL(wp), DIMENSION(2) :: dvrpsize_interval = (/ 0.0_wp, 1.0_wp /) !< REAL(wp), DIMENSION(3) :: groundplate_color = (/ 0.0_wp, 0.6_wp, 0.0_wp /) !< REAL(wp), DIMENSION(3) :: topography_color = (/ 0.8_wp, 0.7_wp, 0.6_wp /) !< REAL(wp), DIMENSION(2,10) :: slicer_range_limits_dvrp !< REAL(wp), DIMENSION(3,10) :: isosurface_color !< REAL(sp), DIMENSION(2,100) :: interval_values_dvrp !< REAL(sp), DIMENSION(2,100) :: interval_values_dvrp_prt !< REAL(sp), DIMENSION(2,100) :: interval_h_dvrp !< REAL(sp), DIMENSION(2,100) :: interval_h_dvrp_prt !< REAL(sp), DIMENSION(2,100) :: interval_l_dvrp = 0.5_sp !< REAL(sp), DIMENSION(2,100) :: interval_l_dvrp_prt = 0.5_sp !< REAL(sp), DIMENSION(2,100) :: interval_s_dvrp = 1.0_sp !< REAL(sp), DIMENSION(2,100) :: interval_s_dvrp_prt = 1.0_sp !< REAL(sp), DIMENSION(2,100) :: interval_a_dvrp = 0.0_sp !< REAL(sp), DIMENSION(2,100) :: interval_a_dvrp_prt = 0.0_sp !< DATA slicer_range_limits_dvrp / -1.0_wp, 1.0_wp, -1.0_wp, 1.0_wp, -1.0_wp, 1.0_wp, & !< -1.0_wp, 1.0_wp, -1.0_wp, 1.0_wp, -1.0_wp, 1.0_wp, & -1.0_wp, 1.0_wp, -1.0_wp, 1.0_wp, -1.0_wp, 1.0_wp, & -1.0_wp, 1.0_wp / DATA isosurface_color / 0.9_wp, 0.9_wp, 0.9_wp, 0.8_wp, 0.1_wp, 0.1_wp, 0.1_wp, 0.1_wp, 0.8_wp, & !< 0.1_wp, 0.8_wp, 0.1_wp, 0.6_wp, 0.1_wp, 0.1_wp, 0.1_wp, 0.1_wp, 0.6_wp, & 0.1_wp, 0.6_wp, 0.1_wp, 0.4_wp, 0.1_wp, 0.1_wp, 0.1_wp, 0.1_wp, 0.4_wp, & 0.1_wp, 0.4_wp, 0.1_wp / DATA interval_h_dvrp / 270.0_wp, 225.0_wp, 225.0_wp, 180.0_wp, 70.0_wp, 25.0_wp, & !< 25.0_wp, -25.0_wp, 192 * 0.0_wp / DATA interval_h_dvrp_prt / 270.0_wp, 225.0_wp, 225.0_wp, 180.0_wp, 70.0_wp, 25.0_wp, & !< 25.0_wp, -25.0_wp, 192 * 0.0_wp / REAL(sp), DIMENSION(:), ALLOCATABLE :: xcoor_dvrp !< REAL(sp), DIMENSION(:), ALLOCATABLE :: ycoor_dvrp !< REAL(sp), DIMENSION(:), ALLOCATABLE :: zcoor_dvrp !< TYPE steering CHARACTER (LEN=24) :: name !< REAL(sp) :: min !< REAL(sp) :: max !< INTEGER(iwp) :: imin !< INTEGER(iwp) :: imax !< END TYPE steering TYPE(steering), DIMENSION(:), ALLOCATABLE :: steering_dvrp !< SAVE END MODULE dvrp_variables !------------------------------------------------------------------------------! ! Description: ! ------------ !> Definition of grid spacings. !------------------------------------------------------------------------------! MODULE grid_variables USE kinds REAL(wp) :: ddx !< 1/dx REAL(wp) :: ddx2 !< 1/dx2 REAL(wp) :: dx = 1.0_wp !< horizontal grid size (along x-direction) REAL(wp) :: dx2 !< dx*dx REAL(wp) :: ddy !< 1/dy REAL(wp) :: ddy2 !< 1/dy2 REAL(wp) :: dy = 1.0_wp !< horizontal grid size (along y-direction) REAL(wp) :: dy2 !< dy*dy REAL(wp), DIMENSION(:), ALLOCATABLE :: ddx2_mg !< 1/dx_l**2 (dx_l: grid spacing along x on different multigrid level) REAL(wp), DIMENSION(:), ALLOCATABLE :: ddy2_mg !< 1/dy_l**2 (dy_l: grid spacing along y on different multigrid level) REAL(wp), DIMENSION(:,:), ALLOCATABLE :: zu_s_inner !< height of topography top on scalar grid REAL(wp), DIMENSION(:,:), ALLOCATABLE :: zw_w_inner !< height of topography top on w grid SAVE END MODULE grid_variables !------------------------------------------------------------------------------! ! Description: ! ------------ !> Definition of array bounds, number of gridpoints, and wall flag arrays. !------------------------------------------------------------------------------! MODULE indices USE kinds INTEGER(iwp) :: nbgp = 3 !< number of boundary ghost points INTEGER(iwp) :: ngp_sums !< number of vertical profile grid points time number of output profiles - used for allreduce statements in MPI calls INTEGER(iwp) :: ngp_sums_ls !< number of vertical profile grid points time number of large-scale forcing profiles - used for allreduce statements in MPI calls INTEGER(iwp) :: nnx !< number of subdomain grid points in x-direction INTEGER(iwp) :: nx = 0 !< nx+1 = total number of grid points in x-direction INTEGER(iwp) :: nx_a !< Siggi INTEGER(iwp) :: nx_o !< Siggi INTEGER(iwp) :: nxl !< left-most grid index of subdomain (excluding ghost points) INTEGER(iwp) :: nxlg !< left-most grid index of subdomain (including ghost points) INTEGER(iwp) :: nxlu !< =nxl+1 (at left domain boundary with inflow from left), else =nxl INTEGER(iwp) :: nxr !< right-most grid index of subdomain (excluding ghost points) INTEGER(iwp) :: nxrg !< right-most grid index of subdomain (including ghost points) INTEGER(iwp) :: nx_on_file !< nx of previous run in job chain INTEGER(iwp) :: nny !< number of subdomain grid points in y-direction INTEGER(iwp) :: ny = 0 !< ny+1 = total number of grid points in y-direction INTEGER(iwp) :: ny_a !< Siggi INTEGER(iwp) :: ny_o !< Siggi INTEGER(iwp) :: nyn !< north-most grid index of subdomain (excluding ghost points) INTEGER(iwp) :: nyng !< north-most grid index of subdomain (including ghost points) INTEGER(iwp) :: nys !< south-most grid index of subdomain (excluding ghost points) INTEGER(iwp) :: nysg !< south-most grid index of subdomain (including ghost points) INTEGER(iwp) :: nysv !< =nys+1 (at south domain boundary with inflow from south), else =nys INTEGER(iwp) :: ny_on_file !< ny of previous run in job chain INTEGER(iwp) :: nnz !< number of subdomain grid points in z-direction INTEGER(iwp) :: nz = 0 !< total number of grid points in z-direction INTEGER(iwp) :: nzb !< bottom grid index of computational domain INTEGER(iwp) :: nzb_diff !< will be removed INTEGER(iwp) :: nzb_max !< vertical index of topography top INTEGER(iwp) :: nzt !< nzt+1 = top grid index of computational domain INTEGER(idp), DIMENSION(:), ALLOCATABLE :: ngp_3d !< number of grid points of the total domain INTEGER(idp), DIMENSION(:), ALLOCATABLE :: ngp_3d_inner !< ! need to have 64 bit for grids > 2E9 INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: ngp_2dh !< number of grid points of a horizontal cross section through the total domain INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: nxl_mg !< left-most grid index of subdomain on different multigrid level INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: nxr_mg !< right-most grid index of subdomain on different multigrid level INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: nyn_mg !< north-most grid index of subdomain on different multigrid level INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: nys_mg !< south-most grid index of subdomain on different multigrid level INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: nzt_mg !< top-most grid index of subdomain on different multigrid level INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: ngp_2dh_outer !< number of horizontal grid points which are non-topography and non-surface-bounded INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: ngp_2dh_s_inner !< number of horizontal grid points which are non-topography INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: mg_loc_ind !< Siggi INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: nzb_diff_s_inner !< will be removed INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: nzb_diff_s_outer !< will be removed INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: nzb_inner !< will be removed INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: nzb_outer !< will be removed INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: nzb_s_inner !< will be removed INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: nzb_s_outer !< will be removed INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: nzb_u_inner !< will be removed INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: nzb_u_outer !< will be removed INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: nzb_v_inner !< will be removed INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: nzb_v_outer !< will be removed INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: nzb_w_inner !< will be removed INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: nzb_w_outer !< will be removed INTEGER(iwp), DIMENSION(:,:,:), POINTER :: flags !< pointer to wall_flags_1-10 INTEGER(iwp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: wall_flags_1 !< topograpyh masking flag on multigrid level 1 INTEGER(iwp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: wall_flags_2 !< topograpyh masking flag on multigrid level 2 INTEGER(iwp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: wall_flags_3 !< topograpyh masking flag on multigrid level 3 INTEGER(iwp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: wall_flags_4 !< topograpyh masking flag on multigrid level 4 INTEGER(iwp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: wall_flags_5 !< topograpyh masking flag on multigrid level 5 INTEGER(iwp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: wall_flags_6 !< topograpyh masking flag on multigrid level 6 INTEGER(iwp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: wall_flags_7 !< topograpyh masking flag on multigrid level 7 INTEGER(iwp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: wall_flags_8 !< topograpyh masking flag on multigrid level 8 INTEGER(iwp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: wall_flags_9 !< topograpyh masking flag on multigrid level 9 INTEGER(iwp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: wall_flags_10 !< topograpyh masking flag on multigrid level 10 INTEGER(iwp), DIMENSION(:,:,:), ALLOCATABLE :: advc_flags_1 !< flags used to degrade order of advection scheme INTEGER(iwp), DIMENSION(:,:,:), ALLOCATABLE :: advc_flags_2 !< flags used to degrade order of advection scheme INTEGER(iwp), DIMENSION(:,:,:), ALLOCATABLE :: wall_flags_0 !< flags to mask topography and surface-bounded grid points SAVE END MODULE indices !------------------------------------------------------------------------------! ! Description: ! ------------ !> Interfaces for special subroutines which use optional parameters. !------------------------------------------------------------------------------! MODULE interfaces INTERFACE !------------------------------------------------------------------------------! ! Description: ! ------------ !> @todo Missing subroutine description. !------------------------------------------------------------------------------! SUBROUTINE global_min_max ( i1, i2, j1, j2, k1, k2, feld, mode, offset, & wert, wert_ijk, wert1, wert1_ijk ) USE kinds CHARACTER (LEN=*), INTENT(IN) :: mode !< Siggi (entire module, some variables are still in German) INTEGER(iwp), INTENT(IN) :: i1 !< INTEGER(iwp), INTENT(IN) :: i2 !< INTEGER(iwp), INTENT(IN) :: j1 !< INTEGER(iwp), INTENT(IN) :: j2 !< INTEGER(iwp), INTENT(IN) :: k1 !< INTEGER(iwp), INTENT(IN) :: k2 !< INTEGER(iwp) :: wert_ijk(3) !< INTEGER(iwp), OPTIONAL :: wert1_ijk(3) !< REAL(wp) :: offset !< REAL(wp) :: wert !< REAL(wp), OPTIONAL :: wert1 !< REAL(wp), INTENT(IN) :: feld(i1:i2,j1:j2,k1:k2) !< END SUBROUTINE global_min_max END INTERFACE SAVE END MODULE interfaces !------------------------------------------------------------------------------! ! Description: ! ------------ !> Interfaces for subroutines with pointer arguments called in !> prognostic_equations. !------------------------------------------------------------------------------! MODULE pointer_interfaces INTERFACE !------------------------------------------------------------------------------! ! Description: ! ------------ !> @todo Missing subroutine description. !------------------------------------------------------------------------------! SUBROUTINE advec_s_bc( sk, sk_char ) USE kinds CHARACTER (LEN=*), INTENT(IN) :: sk_char !< string for treated scalar in Bott-Chlond scheme #if defined( __nopointer ) REAL(wp), DIMENSION(:,:,:) :: sk !< treated scalar array in Bott-Chlond scheme #else REAL(wp), DIMENSION(:,:,:), POINTER :: sk !< treated scalar array in Bott-Chlond scheme #endif END SUBROUTINE advec_s_bc END INTERFACE SAVE END MODULE pointer_interfaces !------------------------------------------------------------------------------! ! Description: ! ------------ !> Definition of variables for the 1D-model. !------------------------------------------------------------------------------! MODULE model_1d USE kinds INTEGER(iwp) :: current_timestep_number_1d = 0 !< current timestep number (1d-model) INTEGER(iwp) :: damp_level_ind_1d !< lower grid index of damping layer (1d-model) LOGICAL :: run_control_header_1d = .FALSE. !< flag for output of run control header (1d-model) LOGICAL :: stop_dt_1d = .FALSE. !< termination flag, used in case of too small timestep (1d-model) REAL(wp) :: damp_level_1d = -1.0_wp !< namelist parameter REAL(wp) :: dt_1d = 60.0_wp !< dynamic timestep (1d-model) REAL(wp) :: dt_max_1d = 300.0_wp !< timestep limit (1d-model) REAL(wp) :: dt_pr_1d = 9999999.9_wp !< namelist parameter REAL(wp) :: dt_run_control_1d = 60.0_wp !< namelist parameter REAL(wp) :: end_time_1d = 864000.0_wp !< namelist parameter REAL(wp) :: old_dt_1d = 1.0E-10_wp !< previous timestep (1d-model) REAL(wp) :: qs1d !< characteristic humidity scale (1d-model) REAL(wp) :: simulated_time_1d = 0.0_wp !< updated simulated time (1d-model) REAL(wp) :: time_pr_1d = 0.0_wp !< updated simulated time for profile output (1d-model) REAL(wp) :: time_run_control_1d = 0.0_wp !< updated simulated time for run-control output (1d-model) REAL(wp) :: ts1d !< characteristic temperature scale (1d-model) REAL(wp) :: us1d !< friction velocity (1d-model) REAL(wp) :: usws1d !< u-component of the momentum flux (1d-model) REAL(wp) :: vsws1d !< v-component of the momentum flux (1d-model) REAL(wp) :: z01d !< roughness length for momentum (1d-model) REAL(wp) :: z0h1d !< roughness length for scalars (1d-model) REAL(wp), DIMENSION(:), ALLOCATABLE :: e1d !< tke (1d-model) REAL(wp), DIMENSION(:), ALLOCATABLE :: e1d_p !< prognostic value of tke (1d-model) REAL(wp), DIMENSION(:), ALLOCATABLE :: kh1d !< turbulent diffusion coefficient for heat (1d-model) REAL(wp), DIMENSION(:), ALLOCATABLE :: km1d !< turbulent diffusion coefficient for momentum (1d-model) REAL(wp), DIMENSION(:), ALLOCATABLE :: l_black !< mixing length Blackadar (1d-model) REAL(wp), DIMENSION(:), ALLOCATABLE :: l1d !< mixing length (1d-model) REAL(wp), DIMENSION(:), ALLOCATABLE :: rif1d !< Richardson flux number (1d-model) REAL(wp), DIMENSION(:), ALLOCATABLE :: te_e !< Tobias (1d-model) REAL(wp), DIMENSION(:), ALLOCATABLE :: te_em !< Tobias (1d-model) REAL(wp), DIMENSION(:), ALLOCATABLE :: te_u !< Tobias (1d-model) REAL(wp), DIMENSION(:), ALLOCATABLE :: te_um !< Tobias (1d-model) REAL(wp), DIMENSION(:), ALLOCATABLE :: te_v !< Tobias (1d-model) REAL(wp), DIMENSION(:), ALLOCATABLE :: te_vm !< Tobias (1d-model) REAL(wp), DIMENSION(:), ALLOCATABLE :: u1d !< u-velocity component (1d-model) REAL(wp), DIMENSION(:), ALLOCATABLE :: u1d_p !< prognostic value of u-velocity component (1d-model) REAL(wp), DIMENSION(:), ALLOCATABLE :: v1d !< v-velocity component (1d-model) REAL(wp), DIMENSION(:), ALLOCATABLE :: v1d_p !< prognostic value of v-velocity component (1d-model) SAVE END MODULE model_1d !------------------------------------------------------------------------------! ! Description: ! ------------ !> Definition of variables which define processor topology and the exchange of !> ghost point layers. This modules must be placed in all routines which contain !> MPI-calls. !------------------------------------------------------------------------------! MODULE pegrid USE kinds #if defined( __parallel ) #if defined( __mpifh ) INCLUDE "mpif.h" #else USE MPI #endif #endif CHARACTER(LEN=2) :: send_receive = 'al' !< Siggi CHARACTER(LEN=7) :: myid_char = '' !< character string containing processor id number INTEGER(iwp) :: comm1dx !< Siggi INTEGER(iwp) :: comm1dy !< Siggi INTEGER(iwp) :: comm2d !< Siggi INTEGER(iwp) :: comm_inter !< Siggi INTEGER(iwp) :: comm_palm !< Siggi INTEGER(iwp) :: id_inflow = 0 !< myidx of procs at inflow (turbulent inflow method) INTEGER(iwp) :: id_outflow = 0 !< myidx of procs at outflow (turbulent outflow method) INTEGER(iwp) :: id_outflow_source = 0 !< myidx of procs including ouflow source plane (turbulent outflow method) INTEGER(iwp) :: id_recycling = 0 !< myidx of procs containing the recycling plane (turbulence recycling method) INTEGER(iwp) :: ierr !< Siggi INTEGER(iwp) :: myid = 0 !< id number of processor element INTEGER(iwp) :: myidx = 0 !< id number of processor elements with same position along x-direction INTEGER(iwp) :: myidy = 0 !< id number of processor elements with same position along y-direction INTEGER(iwp) :: ndim = 2 !< Siggi INTEGER(iwp) :: ngp_a !< number of grid points in atmosphere domain Siggi INTEGER(iwp) :: ngp_o !< number of grid points in ocean domain Siggi INTEGER(iwp) :: ngp_xy !< number of grid points at atmosphere-ocean interface Siggi INTEGER(iwp) :: ngp_y !< Siggi INTEGER(iwp) :: npex = -1 !< number of processor elements in x-direction INTEGER(iwp) :: npey = -1 !< number of processor elements in y-direction INTEGER(iwp) :: numprocs = 1 !< total number of appointed processor elements INTEGER(iwp) :: numprocs_previous_run = -1 !< total number of appointed processor elements in previous run (job chain) INTEGER(iwp) :: pleft !< MPI-address of the processor left of the current one INTEGER(iwp) :: pnorth !< MPI-address of the processor north of the current one INTEGER(iwp) :: pright !< MPI-address of the processor right of the current one INTEGER(iwp) :: psouth !< MPI-address of the processor south of the current one INTEGER(iwp) :: req_count = 0 !< MPI return variable - checks if Send-Receive operation is already finished INTEGER(iwp) :: sendrecvcount_xy !< Siggi INTEGER(iwp) :: sendrecvcount_yz !< Siggi INTEGER(iwp) :: sendrecvcount_zx !< Siggi INTEGER(iwp) :: sendrecvcount_zyd !< Siggi INTEGER(iwp) :: sendrecvcount_yxd !< Siggi INTEGER(iwp) :: target_id !< Siggi INTEGER(iwp) :: tasks_per_node = -9999 !< MPI tasks per computing node INTEGER(iwp) :: threads_per_task = 1 !< OPENMP threads per MPI task INTEGER(iwp) :: type_x !< derived MPI datatype for 2-D ghost-point exchange - north / south INTEGER(iwp) :: type_xy !< derived MPI datatype for 2-D ghost-point exchange - north / south INTEGER(iwp) :: type_y !< derived MPI datatype for 2-D exchange in atmosphere-ocean coupler INTEGER(iwp) :: pdims(2) = 1 !< number of processors along x-y dimension INTEGER(iwp) :: req(100) !< MPI return variable indicating if send-receive operation is finished INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: hor_index_bounds !< horizontal index bounds INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: hor_index_bounds_previous_run !< horizontal index bounds of previous run LOGICAL :: collective_wait = .FALSE. !< Siggi LOGICAL :: sendrecv_in_background = .FALSE. !< Siggi #if defined( __parallel ) #if defined( __mpi2 ) CHARACTER (LEN=MPI_MAX_PORT_NAME) :: port_name !< Siggi #endif INTEGER(iwp) :: ibuf(12) !< Siggi INTEGER(iwp) :: pcoord(2) !< Siggi INTEGER(iwp) :: status(MPI_STATUS_SIZE) !< Siggi INTEGER(iwp), DIMENSION(MPI_STATUS_SIZE,100) :: wait_stat !< Siggi INTEGER(iwp) :: ngp_yz_int !< number of ghost points in yz-plane INTEGER(iwp) :: type_xz_int !< derived MPI datatype for 3-D integer ghost-point exchange - north / south INTEGER(iwp) :: type_yz_int !< derived MPI datatype for 3-D integer ghost-point exchange - left / right INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: ngp_xz !< number of ghost points in xz-plane on different multigrid level INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: ngp_yz !< number of ghost points in yz-plane on different multigrid level INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: type_x_int !< derived MPI datatype for 2-D integer ghost-point exchange - north / south INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: type_xz !< derived MPI datatype for 3-D integer ghost-point exchange - north / south INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: type_y_int !< derived MPI datatype for 2-D integer ghost-point exchange - left / right INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: type_yz !< derived MPI datatype for 3-D integer ghost-point exchange - left / right LOGICAL :: left_border_pe = .FALSE. !< = .TRUE. if PE is on left border of computational domain LOGICAL :: north_border_pe = .FALSE. !< = .TRUE. if PE is on north border of computational domain LOGICAL :: reorder = .TRUE. !< Siggi LOGICAL :: right_border_pe = .FALSE. !< = .TRUE. if PE is on right border of computational domain LOGICAL :: south_border_pe = .FALSE. !< = .TRUE. if PE is on south border of computational domain LOGICAL, DIMENSION(2) :: cyclic = (/ .TRUE. , .TRUE. /) !< Siggi LOGICAL, DIMENSION(2) :: remain_dims !< Siggi #endif SAVE END MODULE pegrid !------------------------------------------------------------------------------! ! Description: ! ------------ !> Definition of variables which control PROFIL-output. !------------------------------------------------------------------------------! MODULE profil_parameter USE kinds INTEGER(iwp), PARAMETER :: crmax = 100 !< Siggi (entire module) CHARACTER (LEN=20), DIMENSION(20) :: cross_ts_profiles = & !< (/ ' E E* ', ' dt ', & ' u* w* ', ' th* ', & ' umax vmax wmax ', ' div_old div_new ', & ' z_i_wpt z_i_pt ', ' w"pt"0 w"pt" wpt ', & ' pt(0) pt(zp) ', ' splux spluy spluz ', & ' L ', & ( ' ', i9 = 1, 9 ) /) CHARACTER (LEN=100), DIMENSION(crmax) :: cross_profiles = & !< (/ ' u v ', & ' pt ', & ' w"pt" w*pt* w*pt*BC wpt wptBC ', & ' w"u" w*u* wu w"v" w*v* wv ', & ' km kh ', & ' l ', & ( ' ', i9 = 1, 94 ) /) INTEGER(iwp) :: profile_columns = 2 !< INTEGER(iwp) :: profile_rows = 3 !< INTEGER(iwp) :: profile_number = 0 !< INTEGER(iwp) :: cross_ts_numbers(crmax,crmax) = 0 !< INTEGER(iwp) :: cross_ts_number_count(crmax) = 0 !< INTEGER(iwp) :: dopr_index(300) = 0 !< INTEGER(iwp) :: dopr_initial_index(300) = 0 !< INTEGER(iwp) :: dots_crossindex(100) = 0 !< INTEGER(iwp) :: dots_index(100) = 0 !< REAL(wp) :: cross_ts_uymax(20) = & !< (/ 999.999_wp, 999.999_wp, 999.999_wp, 999.999_wp, 999.999_wp, & 999.999_wp, 999.999_wp, 999.999_wp, 999.999_wp, 999.999_wp, & 999.999_wp, 999.999_wp, 999.999_wp, 999.999_wp, 999.999_wp, & 999.999_wp, 999.999_wp, 999.999_wp, 999.999_wp, 999.999_wp /) REAL(wp) :: cross_ts_uymax_computed(20) = 999.999_wp !< REAL(wp) :: cross_ts_uymin(20) = & !< (/ 999.999_wp, 999.999_wp, 999.999_wp, -5.000_wp, 999.999_wp, & 999.999_wp, 0.000_wp, 999.999_wp, 999.999_wp, 999.999_wp, & 999.999_wp, 999.999_wp, 999.999_wp, 999.999_wp, 999.999_wp, & 999.999_wp, 999.999_wp, 999.999_wp, 999.999_wp, 999.999_wp /) REAL(wp) :: cross_ts_uymin_computed(20) = 999.999_wp !< SAVE END MODULE profil_parameter !------------------------------------------------------------------------------! ! Description: ! ------------ !> Definition of statistical quantities, e.g. global sums. !------------------------------------------------------------------------------! MODULE statistics USE kinds CHARACTER (LEN=40) :: region(0:9) !< label for statistic region INTEGER(iwp) :: pr_palm = 130 !< maximum number of output profiles INTEGER(iwp) :: statistic_regions = 0 !< identifier for statistic regions INTEGER(iwp) :: u_max_ijk(3) = -1 !< index values (i,j,k) of location where u_max occurs INTEGER(iwp) :: v_max_ijk(3) = -1 !< index values (i,j,k) of location where v_max occurs INTEGER(iwp) :: w_max_ijk(3) = -1 !< index values (i,j,k) of location where w_max occurs LOGICAL :: flow_statistics_called = .FALSE. !< flag that tells other routines if flow statistics was executed !< (after each timestep) REAL(wp) :: u_max !< maximum of absolute u-veloctiy in entire domain REAL(wp) :: v_max !< maximum of absolute v-veloctiy in entire domain REAL(wp) :: w_max !< maximum of absolute w-veloctiy in entire domain REAL(wp), DIMENSION(:), ALLOCATABLE :: mean_surface_level_height !< Siggi REAL(wp), DIMENSION(:), ALLOCATABLE :: sums_divnew_l !< subdomain sum (_l) of divergence after pressure !< solver call (new) REAL(wp), DIMENSION(:), ALLOCATABLE :: sums_divold_l !< subdomain sum (_l) of divergence before pressure !< solver call (old) REAL(wp), DIMENSION(:), ALLOCATABLE :: weight_substep !< weighting factor for substeps in timestepping REAL(wp), DIMENSION(:), ALLOCATABLE :: weight_pres !< substep weighting factor for pressure solver REAL(wp), DIMENSION(:,:), ALLOCATABLE :: sums !< global sum array for the various output quantities REAL(wp), DIMENSION(:,:), ALLOCATABLE :: sums_wsts_bc_l !< subdomain sum of sensible heat flux in Bott-Chlond scheme REAL(wp), DIMENSION(:,:), ALLOCATABLE :: ts_value !< timeseries output array for the various output quantities REAL(wp), DIMENSION(:,:), ALLOCATABLE :: sums_wsus_ws_l !< subdomain sum of vertical momentum flux w'u' (5th-order advection scheme only) REAL(wp), DIMENSION(:,:), ALLOCATABLE :: sums_wsvs_ws_l !< subdomain sum of vertical momentum flux w'v' (5th-order advection scheme only) REAL(wp), DIMENSION(:,:), ALLOCATABLE :: sums_us2_ws_l !< subdomain sum of horizontal momentum flux u'u' (5th-order advection scheme only) REAL(wp), DIMENSION(:,:), ALLOCATABLE :: sums_vs2_ws_l !< subdomain sum of horizontal momentum flux v'v' (5th-order advection scheme only) REAL(wp), DIMENSION(:,:), ALLOCATABLE :: sums_ws2_ws_l !< subdomain sum of vertical momentum flux w'w' (5th-order advection scheme only) REAL(wp), DIMENSION(:,:), ALLOCATABLE :: sums_wsncs_ws_l !< subdomain sum of vertical clouddrop-number concentration flux w'nc' (5th-order advection scheme only) REAL(wp), DIMENSION(:,:), ALLOCATABLE :: sums_wsnrs_ws_l !< subdomain sum of vertical raindrop-number concentration flux w'nr' (5th-order advection scheme only) REAL(wp), DIMENSION(:,:), ALLOCATABLE :: sums_wspts_ws_l !< subdomain sum of vertical sensible heat flux w'pt' (5th-order advection scheme only) REAL(wp), DIMENSION(:,:), ALLOCATABLE :: sums_wsqs_ws_l !< subdomain sum of vertical latent heat flux w'q' (5th-order advection scheme only) REAL(wp), DIMENSION(:,:), ALLOCATABLE :: sums_wsqcs_ws_l !< subdomain sum of vertical cloudwater flux w'qc' (5th-order advection scheme only) REAL(wp), DIMENSION(:,:), ALLOCATABLE :: sums_wsqrs_ws_l !< subdomain sum of vertical rainwater flux w'qr' (5th-order advection scheme only) REAL(wp), DIMENSION(:,:), ALLOCATABLE :: sums_wssas_ws_l !< subdomain sum of vertical salinity flux w'sa' (5th-order advection scheme only) REAL(wp), DIMENSION(:,:), ALLOCATABLE :: sums_wsss_ws_l !< subdomain sum of vertical passive scalar flux w's' (5th-order advection scheme only) REAL(wp), DIMENSION(:,:), ALLOCATABLE :: sums_ls_l !< subdomain sum of large scale forcing and nudging tendencies REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: hom_sum !< sum array for horizontal mean REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: rmask !< REAL flag array (0.0 or 1.0) for statistic regions REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: sums_l !< subdomain sum (_l) gathered for various quantities REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: sums_l_l !< subdomain sum (_l) of mixing length from diffusivities REAL(wp), DIMENSION(:,:,:,:), ALLOCATABLE :: hom !< horizontal mean of various quantities (profiles/timeseries) SAVE END MODULE statistics !------------------------------------------------------------------------------! ! Description: ! ------------ !> Definition of indices for transposed arrays. !------------------------------------------------------------------------------! MODULE transpose_indices USE kinds INTEGER(iwp) :: nxl_y !< Siggi (entire module) INTEGER(iwp) :: nxl_yd !< INTEGER(iwp) :: nxl_z !< INTEGER(iwp) :: nxr_y !< INTEGER(iwp) :: nxr_yd !< INTEGER(iwp) :: nxr_z !< INTEGER(iwp) :: nyn_x !< INTEGER(iwp) :: nyn_z !< INTEGER(iwp) :: nys_x !< INTEGER(iwp) :: nys_z !< INTEGER(iwp) :: nzb_x !< INTEGER(iwp) :: nzb_y !< INTEGER(iwp) :: nzb_yd !< INTEGER(iwp) :: nzt_x !< INTEGER(iwp) :: nzt_y !< INTEGER(iwp) :: nzt_yd !< SAVE END MODULE transpose_indices