source: palm/trunk/SOURCE/modules.f90 @ 1289

Last change on this file since 1289 was 1258, checked in by raasch, 10 years ago

last commit documented

  • Property svn:keywords set to Id
File size: 75.5 KB
Line 
1 MODULE advection
2
3!--------------------------------------------------------------------------------!
4! This file is part of PALM.
5!
6! PALM is free software: you can redistribute it and/or modify it under the terms
7! of the GNU General Public License as published by the Free Software Foundation,
8! either version 3 of the License, or (at your option) any later version.
9!
10! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12! A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
13!
14! You should have received a copy of the GNU General Public License along with
15! PALM. If not, see <http://www.gnu.org/licenses/>.
16!
17! Copyright 1997-2012  Leibniz University Hannover
18!--------------------------------------------------------------------------------!
19!
20! Current revisions:
21! ------------------
22!
23!
24! Former revisions:
25! -----------------
26! $Id: modules.f90 1258 2013-11-08 16:09:09Z raasch $
27!
28! 1257 2013-11-08 15:18:40Z raasch
29! set default values for grid indices of maximum velocity components
30! u|v|w_max_ijk
31!
32! 1241 2013-10-30 11:36:58Z heinze
33! Usage of nudging enabled
34! +nudging, ntnudge, ptnudge, qnudge, tnudge, unudge, vnudge, wnudge
35! increase pr_palm from 80 to 90 to allow for more standard profiles
36!
37! Enable prescribed time depenend surface fluxes and geostrophic wind read in
38! from external file LSF_DATA
39! +large_scale_forcing, lsf_surf, lsf_vert, nlsf, time_surf, shf_surf, qsws_surf,
40!  pt_surf, q_surf, p_surf, time_vert, ug_vert, vg_vert, wsubs_vert
41!
42! 1221 2013-09-10 08:59:13Z raasch
43! wall_flags_0 changed to 32bit int, +wall_flags_00,
44! +rflags_s_inner, rflags_invers
45!
46! 1216 2013-08-26 09:31:42Z raasch
47! +transpose_compute_overlap,
48! several variables are now defined in the serial (non-parallel) case also
49!
50! 1212 2013-08-15 08:46:27Z raasch
51! +tri
52!
53! 1179 2013-06-14 05:57:58Z raasch
54! +reference_state, ref_state, use_initial_profile_as_reference, vpt_reference,
55! use_reference renamed use_single_reference_value
56!
57! 1159 2013-05-21 11:58:22Z fricke
58! -bc_lr_dirneu, bc_lr_neudir, bc_ns_dirneu, bc_ns_neudir
59! +use_cmax
60!
61! 1128 2013-04-12 06:19:32Z raasch
62! +background_communication, i_left, i_right, j_north, j_south, req, req_count,
63! send_receive, sendrecv_in_background, wait_stat
64!
65! 1115 2013-03-26 18:16:16Z hoffmann
66! unused variables removed
67!
68! 1113 2013-03-10 02:48:14Z raasch
69! +on_device
70!
71! 1111 2013-03-08 23:54:10Z raasch
72! +tric, nr_timesteps_this_run
73!
74! 1106 2013-03-04 05:31:38Z raasch
75! array_kind renamed precision_kind, pdims defined in serial code
76! bugfix: default value assigned to coupling_start_time
77!
78! 1095 2013-02-03 02:21:01Z raasch
79! FORTRAN error in r1092 removed
80!
81! 1092 2013-02-02 11:24:22Z raasch
82! character length in some derived type changed for better alignment
83!
84! 1065 2012-11-22 17:42:36Z hoffmann
85! + c_sedimentation, limiter_sedimentation, turbulence, a_1, a_2, a_3, b_1, b_2,
86! + b_3, c_1, c_2, c_3, beta_cc
87!
88! bottom boundary condition of qr, nr changed from Dirichlet to Neumann
89!
90! 1053 2012-11-13 17:11:03Z hoffmann
91! necessary expansions according to the two new prognostic equations (nr, qr)
92! of the two-moment cloud physics scheme:
93! +*_init, flux_l_*, diss_l_*, flux_s_*, diss_s_*, *sws, *swst, tend_*, *, *_p
94! +t*_m, *_1, *_2, *_3, *_av, bc_*_b, bc_*_t, ibc_*_b, ibc_*_t, bc_*_t_val,
95! +*_vertical_gradient, *_surface_initial_change, *_vertical_gradient_level,
96! +*_vertical_gradient_level_ind, *_surface, constant_waterflux_*, 
97! +cloud_scheme, icloud_scheme, surface_waterflux_*, sums_ws*s_ws_l, wall_*flux
98!
99! constants for the two-moment scheme:
100! +a_vent, a_term, b_vent, b_term, c_evap, c_term, cof, eps_sb, k_cc, k_cr, k_rr,
101! +k_br, kappa_rr, kin_vis_air, mu_constant_value, nc, pirho_l, dpirho_l, rho_1,
102! +schmidt, schmidt_p_1d3, stp, x0, xmin, xmax, dt_precipitation, w_precipitation
103!
104! steering parameters for the two_moment scheme:
105! +mu_constant, ventilation_effect
106!
107! 1036 2012-10-22 13:43:42Z raasch
108! code put under GPL (PALM 3.9)
109!
110! 1031 2012-10-19 14:35:30Z raasch
111! +output_format_netcdf
112!
113! 1015 2012-09-27 09:23:24Z raasch
114! +acc_rank, num_acc_per_node,
115! -adjust_mixing_length
116!
117! 1010 2012-09-20 07:59:54Z raasch
118! pointer free version can be generated with cpp switch __nopointer
119!
120! 1003 2012-09-14 14:35:53Z raasch
121! -grid_matching, nxa, nya, etc., nnx_pe, nny_pe, spl_*
122!
123! 1001 2012-09-13 14:08:46Z raasch
124! -asselin_filter_factor, cut_spline_overshoot, dt_changed, last_dt_change,
125! last_dt_change_1d, long_filter_factor, overshoot_limit_*, ups_limit_*
126! several pointer/target arrays converted to normal ones
127!
128! 996 2012-09-07 10:41:47Z raasch
129! -use_prior_plot1d_parameters
130!
131! 978 2012-08-09 08:28:32Z fricke
132! +c_u_m, c_u_m_l, c_v_m, c_v_m_l, c_w_m, c_w_m_l,
133! +bc_lr_dirneu, bc_lr_neudir, bc_ns_dirneu, bc_ns_neudir
134! -km_damp_x, km_damp_y, km_damp_max, outflow_damping_width
135! +z0h, z0h_av, z0h_factor, z0h1d
136! +ptdf_x, ptdf_y, pt_damping_width, pt_damping_factor
137!
138! 964 2012-07-26 09:14:24Z raasch
139! -cross_linecolors, cross_linestyles, cross_normalized_x, cross_normx_factor,
140! cross_normalized_y, cross_normy_factor, cross_pnc_local,
141! cross_profile_numbers, cross_profile_number_counter, cross_uxmax,
142! cross_uxmax_computed, cross_uxmax_normalized,
143! cross_uxmax_normalized_computed, cross_uxmin, cross_uxmin_computed,
144! cross_uxmin_normalized, cross_uxmin_normalized_computed, cross_uymax,
145! cross_uymin, cross_xtext, dopr_crossindex, dopr_label, linecolors, linestyles,
146! nz_do1d, profil_output, z_max_do1d, z_max_do1d_normalized
147!
148! 951 2012-07-19 14:22:52Z hoffmann
149! changing profile_columns and profile_rows
150!
151! 940 2012-07-09 14:31:00Z raasch
152! +neutral
153!
154! 927 2012-06-06 19:15:04Z raasch
155! +masking_method
156!
157! 880 2012-04-13 06:28:59Z raasch
158! gathered_size, subdomain_size moved to control_parameters
159!
160! 866 2012-03-28 06:44:41Z raasch
161! interface for global_min_max changed
162!
163! 861 2012-03-26 14:18:34Z suehring
164! +wall_flags_0
165! -boundary_flags
166! +nzb_max
167! +adv_sca_1, +adv_mom_1
168!
169! 849 2012-03-15 10:35:09Z raasch
170! +deleted_particles, deleted_tails, tr.._count_sum, tr.._count_recv_sum in
171! particle_attributes,
172! +de_dx, de_dy, de_dz in arrays_3d,
173! first_call_advec_particles renamed first_call_lpm
174!
175! 828 2012-02-21 12:00:36Z raasch
176! +dissipation_classes, radius_classes, use_kernel_tables,
177! particle feature color renamed class
178!
179! 825 2012-02-19 03:03:44Z raasch
180! +bfactor, curvature_solution_effects, eps_ros, molecular_weight_of_water,
181! vanthoff, -b_cond in cloud_parameters,
182! dopts_num increased to 29, particle attributes speed_x|y|z_sgs renamed
183! rvar1|2|3
184! wang_collision_kernel and turbulence_effects_on_collision replaced by
185! collision_kernel, hall_kernel, palm_kernel, wang_kernel
186!
187! 809 2012-01-30 13:32:58Z marongas
188! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
189!
190! 807 2012-01-25 11:53:51Z maronga
191! New cpp directive "__check" implemented which is used by check_namelist_files.
192! New parameter check_restart has been defined which is needed by
193! check_namelist_files only.
194!
195! 805 2012-01-17 15:53:28Z franke
196! Bugfix collective_wait must be out of parallel branch for runs in serial mode
197!
198! 801 2012-01-10 17:30:36Z suehring
199! Dimesion of sums_wsus_ws_l, ! sums_wsvs_ws_l, sums_us2_ws_l, sums_vs2_ws_l,
200! sums_ws2_ws_l, sums_wspts_ws_l, sums_wsqs_ws_l, sums_wssas_ws_l increased.
201! for thread-safe summation in advec_ws.
202!
203! 792 2011-12-01 01:23:23Z raasch
204! particle arrays (particles, parrticles_temp) implemented as pointers,
205! +particles_1, particles_2, sort_count
206!
207! 790 2011-11-29 03:11:20Z raasch
208! +turbulence_effects_on_collision, wang_collision_kernel
209!
210! 785 2011-11-28 09:47:19Z raasch
211! +scalar_rayleigh_damping, rdf_sc
212!
213! 778 2011-11-07 14:18:25Z fricke
214! +gathered_size, subdomain_size
215!
216! 771 2011-10-27 10:56:21Z heinze
217! +lpt_av
218!
219! 767 2011-10-14 06:39:12Z raasch
220! +u_profile, v_profile, uv_heights, use_prescribed_profile_data
221!
222! 759 2011-09-15 13:58:31Z raasch
223! +io_blocks, io_group, maximum_parallel_io_streams,
224! synchronous_exchange moved to control_parameters
225!
226! 743 2011-08-18 16:10:16Z suehring
227! Dimension of sums_wsus_ws_l, sums_wsvs_ws_l, sums_us2_ws_l, sums_vs2_ws_l,
228! sums_ws2_ws_l, sums_wspts_ws_l, sums_wssas_ws_l,sums_wsqs_ws_l needed for
229! statistical evaluation of turbulent fluxes in WS-scheme decreased.
230! 736 2011-08-17 14:13:26Z suehring
231! Dimension of fluxes needed for WS-scheme increased.
232!
233! 722 2011-04-11 06:21:09Z raasch
234! Bugfix: default value for south_border_pe changed to .F.
235!
236! 707 2011-03-29 11:39:40Z raasch
237! +bc_lr_dirrad, bc_lr_raddir, bc_ns_dirrad, bc_ns_raddir, left_border_pe,
238! north_border_pe, right_border_pe, south_border_pe
239! p_sub renamed p_loc
240!
241! 683 2011-02-09 14:25:15Z raasch
242! +synchronous_exchange
243!
244! 673 2011-01-18 16:19:48Z suehring
245! +weight_pres to weight the respective contribution of the Runge-Kutta
246! substeps. +p_sub to buffer the intermediate contributions for Multigrid and
247! SOR.
248!
249! 667 2010-12-23 12:06:00Z suehring/gryschka
250! Removed u_nzb_p1_for_vfc and v_nzb_p1_for_vfc
251! For coupling with different resolution in ocean and atmophere:
252! +nx_a, +nx_o, ny_a, +ny_o, ngp_a, ngp_o, +total_2d_o, +total_2d_a,
253! +coupling_topology
254! Buffer arrays for the left sided advective fluxes added in arrays_3d.
255! +flux_s_u, +flux_s_v, +flux_s_w, +diss_s_u, +diss_s_v, +diss_s_w,
256! +flux_s_pt, +diss_s_pt, +flux_s_e, +diss_s_e, +flux_s_q, +diss_s_q,
257! +flux_s_sa, +diss_s_sa
258! 3d arrays for dissipation control added. (only necessary for vector arch.)
259! +var_x, +var_y, +var_z, +gamma_x, +gamma_y, +gamma_z
260! Default of momentum_advec and scalar_advec changed to 'ws-scheme' .
261! +exchange_mg added in control_parameters to steer the data exchange.
262! Parameters +nbgp, +nxlg, +nxrg, +nysg, +nyng added in indices.
263! flag array +boundary_flags added in indices to steer the degradation of order
264! of the advective fluxes when non-cyclic boundaries are used.
265! MPI-datatypes +type_y, +type_y_int and +type_yz for data_exchange added in
266! pegrid.
267! +sums_wsus_ws_l, +sums_wsvs_ws_l, +sums_us2_ws_l, +sums_vs2_ws_l,
268! +sums_ws2_ws_l, +sums_wspts_ws_l, +sums_wssas_ws_l, +sums_wsqs_ws_l
269! and +weight_substep added in statistics to steer the statistical evaluation
270! of turbulent fluxes in the advection routines.
271! LOGICALS +ws_scheme_sca and +ws_scheme_mom added to get a better performance
272! in prognostic_equations.
273! LOGICAL +dissipation_control control added to steer numerical dissipation
274! in ws-scheme.
275! Changed length of string run_description_header
276!
277! 622 2010-12-10 08:08:13Z raasch
278! +collective_wait in pegrid
279!
280! 600 2010-11-24 16:10:51Z raasch
281! default values of surface_scalarflux and surface_waterflux changed
282! to 9999999.9
283!
284! 580 2010-10-05 13:59:11Z heinze
285! Renaming of ws_vertical_gradient to subs_vertical_gradient,
286! ws_vertical_gradient_level to subs_vertical_gradient_level and
287! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
288!
289! 564 2010-09-30 13:18:59Z helmke
290! nc_precision and netcdf_precision dimension changed to 11, all default
291! values of mask_xyz_loop changed to -1.0, dimension of openfile changed to
292! 200+2*max_masks, max_masks changed to 50
293!
294! 553 2010-09-01 14:09:06Z weinreis
295! parameters for masked output are replaced by arrays
296!
297! 531 2010-04-21 06:47:21Z heinze
298! character length of dopr_unit enlarged
299!
300! 519 2010-03-19 05:30:02Z raasch
301! -replace_char, replace_by
302!
303! 493 2010-03-01 08:30:24Z raasch
304! +netcdf_data_format, -netcdf_64bit, -netcdf_64bit_3d, -netcdf_format_mask*,
305! -nc_format_mask, -format_parallel_io
306!
307! 485 2010-02-05 10:57:51Z raasch
308! ngp_3d, ngp_3d_inner changed to 64 bit
309!
310! 449 2010-02-02 11:23:59Z raasch
311! -var_ts: replaced by dots_max,
312! initial data assignments to some dvrp arrays changed due to error messages
313! from gfortran compiler
314! +large_scale_subsidence, ws_vertical_gradient, ws_vertical_gradient_level,
315! ws_vertical_gradient_level_ind, w_subs
316!
317! 388 2009-09-23 09:40:33Z raasch
318! +prho, prho_1
319! +bc_lr_cyc, bc_ns_cyc
320! +output_for_t0
321! translation error of actual -> current revisions fixed
322! +q* in dots_label, dots_unit. increased dots_num respectively
323! typographical error in dots_unit fixed
324! +clip_dvrp_*, cluster_size, color_interval, dvrpsize_interval, dvrp_overlap,
325! dvrp_total_overlap, groundplate_color, local_dvrserver_running, n*_dvrp,
326! interval_*_dvrp_prt, isosurface_color, particle_color, particle_dvrpsize,
327! topography color in dvrp_variables,
328! vertical_particle_advection is a 1d-array,
329! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
330! canyon_wall_south, conserve_volume_flow_mode, coupling_start_time,
331! dp_external, dp_level_b, dp_level_ind_b, dp_smooth, dp_smooth_factor, dpdxy,
332! run_coupled, time_since_reference_point, u_bulk, v_bulk in control_parameters,
333! default value of grid_matching changed to strict
334! +shf_av, qsws_av
335!
336! 217 2008-12-09 18:00:48Z letzel
337! +topography_grid_convention
338! some dvrp-variables changed to single precision, variables for dvrp-mode
339! pathlines added, +target_id, abort_mode, message_string
340!
341! 197 2008-09-16 15:29:03Z raasch
342! allow 100 spectra levels instead of 10 for consistency with
343! define_netcdf_header, +canopy_heat_flux, cthf, lai,
344! +leaf_surface_concentration, scalar_exchange_coefficient, sec, sls
345! +hor_index_bounds, hor_index_bounds_previous_run, id_inflow, id_recycling,
346! inflow_damping_*, mean_inflow_profiles, numprocs_previous_run, nx_on_file,
347! ny_on_file, offset_ocean_*, recycling_plane, recycling_width, turbulent_inflow
348! -myid_char_14
349!
350! 138 2007-11-28 10:03:58Z letzel
351! +drag_coefficient, pch_index, lad_surface, lad_vertical_gradient,
352! lad_vertical_gradient_level, plant_canopy, lad, lad_s, lad_u, lad_v,
353! lad_w, cdc, lad_vertical_gradient_level_ind, canopy_mode
354! +dt_sort_particles, ngp_2dh_s_inner, time_sort_particles, flags,
355! wall_flags_1..10, wall_humidityflux(0:4), wall_qflux(0:4),
356! wall_salinityflux(0:4), wall_scalarflux(0:4)
357!
358! 108 2007-08-24 15:10:38Z letzel
359! +comm_inter, constant_top_momentumflux, coupling_char, coupling_mode,
360! coupling_mode_remote, c_u, c_v, c_w, dt_coupling, e_init, humidity_remote,
361! ngp_xy, nxlu, nysv, port_name, qswst_remote, terminate_coupled,
362! terminate_coupled_remote, time_coupling, top_momentumflux_u|v, type_xy,
363! uswst*, vswst*
364!
365! 97 2007-06-21 08:23:15Z raasch
366! +atmos_ocean_sign, ocean, r, + salinity variables
367! defaults of .._vertical_gradient_levels changed from -1.0 to -9999999.9
368! hydro_press renamed hyp, use_pt_reference renamed use_reference
369!
370! 89 2007-05-25 12:08:31Z raasch
371! +data_output_pr_user, max_pr_user, size of data_output_pr, dopr_index,
372! dopr_initial_index and dopr_unit enlarged,
373! var_hom and var_sum renamed pr_palm
374!
375! 82 2007-04-16 15:40:52Z raasch
376! +return_addres, return_username
377! Cpp-directive lcmuk renamed lc
378!
379! 75 2007-03-22 09:54:05Z raasch
380! +arrays precipitation_amount, precipitation_rate, precipitation_rate_av,
381! rif_wall, z0_av, +arrays u_m_l, u_m_r, etc. for radiation boundary conditions,
382! +loop_optimization, netcdf_64bit_3d, zu_s_inner, zw_w_inner, id_var_zusi_*,
383! id_var_zwwi_*, ts_value, u_nzb_p1_for_vfc, v_nzb_p1_for_vfc, pt_reference,
384! use_pt_reference, precipitation_amount_interval, revision
385! +age_m in particle_type, moisture renamed humidity,
386! -data_output_ts, dots_n, uvmean_outflow, uxrp, vynp,
387! arrays dots_label and dots_unit now dimensioned with dots_max,
388! setting of palm version moved to main program
389!
390! 37 2007-03-01 08:33:54Z raasch
391! +constant_top_heatflux, top_heatflux, use_top_fluxes, +arrays for top fluxes,
392! +nzt_diff, default of bc_pt_t renamed "initial_gradient"
393! Bugfix: p is not a pointer
394!
395! RCS Log replace by Id keyword, revision history cleaned up
396!
397! Revision 1.95  2007/02/11 13:18:30  raasch
398! version 3.1b (last under RCS control)
399!
400! Revision 1.1  1997/07/24 11:21:26  raasch
401! Initial revision
402!
403!
404! Description:
405! ------------
406! Definition of variables for special advection schemes
407!------------------------------------------------------------------------------!
408
409    REAL, DIMENSION(:), ALLOCATABLE   ::  aex, bex, dex, eex
410
411    SAVE
412
413 END MODULE advection
414
415
416
417
418 MODULE precision_kind
419
420!------------------------------------------------------------------------------!
421! Description:
422! ------------
423! Definition of type parameters (used for the definition of single or double
424! precision variables)
425!------------------------------------------------------------------------------!
426
427    INTEGER, PARAMETER ::  dpk = SELECTED_REAL_KIND( 12 ), &
428                           spk = SELECTED_REAL_KIND( 6 )
429
430    SAVE
431
432 END MODULE precision_kind
433
434
435
436
437 MODULE arrays_3d
438
439!------------------------------------------------------------------------------!
440! Description:
441! ------------
442! Definition of all arrays defined on the computational grid
443!------------------------------------------------------------------------------!
444
445    USE precision_kind
446
447    REAL, DIMENSION(:), ALLOCATABLE ::                                         &
448          c_u_m, c_u_m_l, c_v_m, c_v_m_l, c_w_m, c_w_m_l, ddzu, ddzu_pres,     &
449          dd2zu, dzu, ddzw, dzw, hyp, inflow_damping_factor, lad, l_grid,      &
450          nc_1d, nr_1d, ptdf_x, ptdf_y, p_surf, pt_surf, pt_1d, pt_init,       &
451          qsws_surf, q_1d, q_init, q_surf, qc_1d, qr_1d, rdf, rdf_sc,          & 
452          ref_state, sa_init, shf_surf, timenudge, time_surf, time_vert, ug,   &
453          u_init, u_nzb_p1_for_vfc, vg, v_init, v_nzb_p1_for_vfc, w_subs, zu, zw
454
455    REAL, DIMENSION(:,:), ALLOCATABLE ::                                       &
456          c_u, c_v, c_w, diss_s_e, diss_s_nr, diss_s_pt, diss_s_q,             &
457          diss_s_qr, diss_s_sa, diss_s_u, diss_s_v, diss_s_w, dzu_mg, dzw_mg,  &
458          flux_s_e, flux_s_nr, flux_s_pt, flux_s_q, flux_s_qr, flux_s_sa,      &
459          flux_s_u, flux_s_v, flux_s_w, f1_mg, f2_mg, f3_mg,                   &
460          mean_inflow_profiles, nrs, nrsws, nrswst, ptnudge, pt_slope_ref,     &
461          qnudge, qs, qsws, qswst, qswst_remote, qrs, qrsws, qrswst, rif,      &
462          saswsb, saswst, shf, tnudge, total_2d_a, total_2d_o, ts, tswst,      &
463          ug_vert, unudge, us, usws, uswst, vnudge, vg_vert, vsws, vswst,      &
464          wnudge, wsubs_vert, z0, z0h
465
466    REAL, DIMENSION(:,:,:), ALLOCATABLE ::                                     &
467          canopy_heat_flux, cdc, d, de_dx, de_dy, de_dz, diss, diss_l_e,       &
468          diss_l_nr, diss_l_pt, diss_l_q, diss_l_qr, diss_l_sa, diss_l_u,      &
469          diss_l_v, diss_l_w, flux_l_e, flux_l_nr, flux_l_pt, flux_l_q,        &
470          flux_l_qr, flux_l_sa, flux_l_u, flux_l_v, flux_l_w, kh, km, lad_s,   &
471          lad_u, lad_v, lad_w, lai, l_wall, p_loc, sec, sls, tend, tend_pt,    &
472          tend_nr, tend_q, tend_qr, tric, u_m_l, u_m_n, u_m_r, u_m_s, v_m_l,   &
473          v_m_n, v_m_r, v_m_s, w_m_l, w_m_n, w_m_r, w_m_s
474
475#if defined( __nopointer )
476    REAL, DIMENSION(:,:,:), ALLOCATABLE, TARGET ::                             &
477          e, e_p, nr, nr_p, p, prho, pt, pt_p, q, q_p, qc, ql, ql_c, ql_v,     &
478          ql_vp, qr, qr_p, rho, sa, sa_p, te_m, tnr_m, tpt_m, tq_m, tqr_m,     &
479          tsa_m, tu_m, tv_m, tw_m, u, u_p, v, v_p, vpt, w, w_p
480#else
481    REAL, DIMENSION(:,:,:), ALLOCATABLE, TARGET ::                             &
482          e_1, e_2, e_3, p, prho_1, nr_1, nr_2, nr_3, pt_1, pt_2, pt_3, q_1,   &
483          q_2, q_3, qc_1, ql_v, ql_vp, ql_1, ql_2, qr_1, qr_2, qr_3, rho_1,    &
484          sa_1, sa_2, sa_3, u_1, u_2, u_3, v_1, v_2, v_3, vpt_1, w_1, w_2, w_3
485
486    REAL, DIMENSION(:,:,:), POINTER ::                                         &
487          e, e_p, nr, nr_p, prho, pt, pt_p, q, q_p, qc, ql, ql_c, qr, qr_p,    &
488          rho, sa, sa_p, te_m, tnr_m, tpt_m, tq_m, tqr_m, tsa_m, tu_m, tv_m,   &
489          tw_m, u, u_p, v, v_p, vpt, w, w_p
490#endif
491
492    REAL, DIMENSION(:,:,:,:), ALLOCATABLE ::  rif_wall, tri
493
494    REAL, DIMENSION(:,:,:), ALLOCATABLE :: var_x, var_y, var_z, gamma_x,       &
495                                           gamma_y, gamma_z
496
497
498    SAVE
499
500 END MODULE arrays_3d
501
502
503
504
505 MODULE averaging
506
507!------------------------------------------------------------------------------!
508! Description:
509! ------------
510! Definition of variables needed for time-averaging of 2d/3d data
511!------------------------------------------------------------------------------!
512
513    REAL, DIMENSION(:,:), ALLOCATABLE ::  lwp_av, precipitation_rate_av,       &
514                                          qsws_av, shf_av,ts_av, us_av, z0_av, &
515                                          z0h_av
516
517    REAL, DIMENSION(:,:,:), ALLOCATABLE, TARGET :: &
518          e_av, lpt_av, nr_av, p_av, pc_av, pr_av, prr_av, pt_av, q_av, qc_av, &
519          ql_av, ql_c_av, ql_v_av, ql_vp_av, qr_av, qv_av, rho_av, s_av, sa_av,&
520          u_av, v_av, vpt_av, w_av
521 
522 END MODULE averaging
523
524
525
526 MODULE cloud_parameters
527
528!------------------------------------------------------------------------------!
529! Description:
530! ------------
531! Definition of variables and constants for cloud physics
532!------------------------------------------------------------------------------!
533
534    LOGICAL ::  curvature_solution_effects = .FALSE., &
535                limiter_sedimentation = .TRUE., &
536                ventilation_effect = .FALSE.
537               
538
539    REAL ::  a_1 = 8.69E-4,     & ! coef. in turb. parametrization (cm-2 s3)
540             a_2 = -7.38E-5,    & ! coef. in turb. parametrization (cm-2 s3)
541             a_3 = -1.40E-2,    & ! coef. in turb. parametrization
542             a_term = 9.65,     & ! coef. for terminal velocity (m s-1)
543             a_vent = 0.78,     & ! coef. for ventilation effect
544             b_1 = 11.45E-6,    & ! coef. in turb. parametrization (m)
545             b_2 = 9.68E-6,     & ! coef. in turb. parametrization (m)
546             b_3 = 0.62,        & ! coef. in turb. parametrization
547             b_term = 9.8,      & ! coef. for terminal velocity (m s-1)
548             b_vent = 0.308,    & ! coef. for ventilation effect
549             beta_cc = 3.09E-4, & ! coef. in turb. parametrization (cm-2 s3)
550             bfactor,           &
551             c_1 = 4.82E-6,     & ! coef. in turb. parametrization (m)
552             c_2 = 4.8E-6,      & ! coef. in turb. parametrization (m)
553             c_3 = 0.76,        & ! coef. in turb. parametrization
554             c_const = 0.93,    & ! const. in Taylor-microscale Reynolds number
555             c_evap = 0.7,      & ! constant in evaporation
556             c_sedimentation = 2.0, & ! Courant number of sedimentation process
557             c_term = 600.0,    & ! coef. for terminal velocity (m-1)
558             cof(6) = (/ 76.18009172947146,      & ! coefficients in the
559                         -86.50532032941677,     & ! numerical
560                         24.01409824083091,      & ! calculation of the
561                         -1.231739572450155,     & ! gamma function
562                         0.1208650973866179E-2,  &
563                         -0.5395239384953E-5 /), &
564             cp = 1005.0,       & ! heat capacity of dry air (J kg-1 K-1)
565             diff_coeff_l = 0.23E-4, & ! diffusivity of water vapor (m2 s-1)
566             effective_coll_efficiency, &
567             eps_ros = 1.0E-4,  & ! accuracy of Rosenbrock method
568             eps_sb = 1.0E-20,  & ! threshold in two-moments scheme
569             k_cc = 9.44E09,    & ! const. cloud-cloud kernel (m3 kg-2 s-1)
570             k_cr0 = 4.33,      & ! const. cloud-rain kernel (m3 kg-1 s-1)
571             k_rr = 7.12,       & ! const. rain-rain kernel (m3 kg-1 s-1)
572             k_br = 1000.,      & ! const. in breakup parametrization (m-1)
573             k_st = 1.2E8,      & ! const. in drizzle parametrization (m-1 s-1)
574             kappa_rr = 60.7,   & ! const. in collision kernel (kg-1/3)
575             kin_vis_air = 1.4086E-5, & ! kin. viscosity of air (m2 s-1)
576             l_v = 2.5E+06,     & ! latent heat of vaporization (J kg-1)
577             l_d_cp, l_d_r, l_d_rv, & ! l_v / cp, l_v / r_d, l_v / r_v
578             mass_of_solute = 1.0E-17, & ! soluted NaCl (kg)
579             molecular_weight_of_solute = 0.05844, & ! mol. m. NaCl (kg mol-1)
580             molecular_weight_of_water = 0.01801528, & ! mol. m. H2O (kg mol-1)
581             nc_const = 70.0E6, & ! cloud droplet concentration
582             prec_time_const = 0.001, & !coef. in Kessler scheme
583             pirho_l, dpirho_l, & ! pi * rho_l / 6.0; 6.0 / ( pi * rho_l )
584             rho_l = 1.0E3,     & ! density of water (kg m-3)
585             ql_crit = 0.0005,  & ! coef. in Kessler scheme
586             r_d = 287.0,       & ! sp. gas const. dry air (J kg-1 K-1)
587             r_v = 461.51,      & ! sp. gas const. water vapor (J kg-1 K-1)
588             schmidt = 0.71,    & ! Schmidt number
589             schmidt_p_1d3,     & ! schmidt**( 1.0 / 3.0 )
590             sigma_gc = 1.3,    & ! log-normal geometric standard deviation
591             stp = 2.5066282746310005, & ! parameter in gamma function
592             thermal_conductivity_l = 2.43E-2, & ! therm. cond. air (J m-1 s-1 K-1)
593             vanthoff = 2.0,    & ! van't Hoff factor for NaCl
594             x0 = 2.6E-10,      & ! separating drop mass (kg)
595             xrmin = 2.6E-10,   & ! minimum rain drop size (kg)
596             xrmax = 5.0E-6,    & ! maximum rain drop site (kg)
597             dt_precipitation = 100.0, & ! timestep precipitation (s)
598             w_precipitation = 9.65      ! maximum terminal velocity (m s-1)
599
600    REAL, DIMENSION(:), ALLOCATABLE     ::  hyrho, pt_d_t, t_d_pt 
601
602    REAL, DIMENSION(:,:), ALLOCATABLE   ::  precipitation_amount, &
603                                            precipitation_rate
604!
605!-- 3D array of precipitation rate
606    REAL, DIMENSION(:,:,:), ALLOCATABLE ::  prr
607
608    SAVE
609
610 END MODULE cloud_parameters
611
612
613
614
615 MODULE constants
616
617!------------------------------------------------------------------------------!
618! Description:
619! ------------
620! Definition of general constants
621!------------------------------------------------------------------------------!
622
623    REAL    ::  pi = 3.141592654
624    REAL    ::  adv_mom_1, adv_mom_3, adv_mom_5, adv_sca_1, adv_sca_3, adv_sca_5
625   
626
627    SAVE
628
629 END MODULE constants
630
631
632
633
634 MODULE control_parameters
635
636!------------------------------------------------------------------------------!
637! Description:
638! ------------
639! Definition of parameters for program control
640!------------------------------------------------------------------------------!
641
642    TYPE plot_precision
643       CHARACTER (LEN=8) ::  variable
644       INTEGER           ::  precision
645    END TYPE plot_precision
646
647    TYPE(plot_precision), DIMENSION(100) ::  plot_3d_precision =               &
648                        (/ plot_precision( 'u', 2 ), plot_precision( 'v', 2 ), &
649                           plot_precision( 'w', 2 ), plot_precision( 'p', 5 ), &
650                           plot_precision( 'pt', 2 ),                          &
651                           ( plot_precision( ' ', 1 ), i9 = 1,95 ) /)
652
653    TYPE file_status
654       LOGICAL ::  opened, opened_before
655    END TYPE file_status
656   
657    INTEGER, PARAMETER :: mask_xyz_dimension = 100, max_masks = 50
658
659    TYPE(file_status), DIMENSION(200+2*max_masks) ::                &
660                             openfile = file_status(.FALSE.,.FALSE.)
661
662    CHARACTER (LEN=1)    ::  cycle_mg = 'w', timestep_reason = ' '
663    CHARACTER (LEN=2)    ::  coupling_char = ''
664    CHARACTER (LEN=5)    ::  write_binary = 'false'
665    CHARACTER (LEN=8)    ::  run_date, run_time
666    CHARACTER (LEN=9)    ::  simulated_time_chr
667    CHARACTER (LEN=11)   ::  topography_grid_convention = ' '
668    CHARACTER (LEN=12)   ::  version = ' ', revision = ' '
669    CHARACTER (LEN=16)   ::  conserve_volume_flow_mode = 'default', &
670                             loop_optimization = 'default', &
671                             momentum_advec = 'ws-scheme', &
672                             psolver = 'poisfft', &
673                             scalar_advec = 'ws-scheme'
674    CHARACTER (LEN=20)   ::  bc_e_b = 'neumann', bc_lr = 'cyclic', &
675                             bc_ns = 'cyclic', bc_p_b = 'neumann', &
676                             bc_p_t = 'dirichlet', bc_pt_b = 'dirichlet', &
677                             bc_pt_t = 'initial_gradient', &
678                             bc_q_b = 'dirichlet', bc_q_t = 'neumann', &
679                             bc_s_b = 'dirichlet', bc_s_t = 'neumann', &
680                             bc_sa_t = 'neumann', &
681                             bc_uv_b = 'dirichlet', bc_uv_t = 'dirichlet', &
682                             canopy_mode = 'block', &
683                             cloud_scheme = 'seifert_beheng', &
684                             coupling_mode = 'uncoupled', &
685                             coupling_mode_remote = 'uncoupled', &
686                             dissipation_1d = 'as_in_3d_model', &
687                             fft_method = 'system-specific', &
688                             mixing_length_1d = 'as_in_3d_model', &
689                             random_generator = 'numerical-recipes', &
690                             reference_state = 'initial_profile', &
691                             return_addres, return_username, &
692                             timestep_scheme = 'runge-kutta-3'                             
693    CHARACTER (LEN=40)   ::  avs_data_file, output_format_netcdf, &
694                             topography = 'flat'
695    CHARACTER (LEN=64)   ::  host = ' '
696    CHARACTER (LEN=80)   ::  log_message, run_identifier
697    CHARACTER (LEN=100)  ::  initializing_actions = ' ' 
698    CHARACTER (LEN=110)  ::  run_description_header
699    CHARACTER (LEN=1000) ::  message_string = ' '
700
701    CHARACTER (LEN=7),  DIMENSION(100) ::  do3d_comp_prec = ' '
702    CHARACTER (LEN=10), DIMENSION(10)  ::  data_output_format = ' '
703    CHARACTER (LEN=11), DIMENSION(100) ::  data_output = ' ',    &
704                                           data_output_user = ' ', doav = ' '
705    CHARACTER (LEN=10), DIMENSION(max_masks,100) ::  &
706         data_output_masks = ' ', data_output_masks_user = ' '
707
708    CHARACTER (LEN=10), DIMENSION(300) ::  data_output_pr = ' '
709    CHARACTER (LEN=10), DIMENSION(200) ::  data_output_pr_user = ' '
710    CHARACTER (LEN=20), DIMENSION(11)  ::  netcdf_precision = ' '
711
712    CHARACTER (LEN=10), DIMENSION(max_masks,0:1,100) ::  domask = ' '
713    CHARACTER (LEN=10), DIMENSION(0:1,100) ::  do2d = ' ', do3d = ' '
714
715    INTEGER ::  abort_mode = 1, average_count_pr = 0, average_count_sp = 0, &
716                average_count_3d = 0, current_timestep_number = 0, &
717                coupling_topology = 0, &
718                dist_range = 0, disturbance_level_ind_b, &
719                disturbance_level_ind_t, doav_n = 0, dopr_n = 0, &
720                dopr_time_count = 0, dopts_time_count = 0, &
721                dosp_time_count = 0, dots_time_count = 0, &
722                do2d_xy_n = 0, do2d_xz_n = 0, do2d_yz_n = 0, do3d_avs_n = 0, &
723                dp_level_ind_b = 0, dvrp_filecount = 0, &
724                dz_stretch_level_index, gamma_mg, gathered_size, &
725                grid_level, ibc_e_b, ibc_p_b, ibc_p_t, &
726                ibc_pt_b, ibc_pt_t, ibc_q_b, ibc_q_t, &
727                ibc_sa_t, ibc_uv_b, ibc_uv_t, icloud_scheme, &
728                inflow_disturbance_begin = -1, inflow_disturbance_end = -1, &
729                intermediate_timestep_count, intermediate_timestep_count_max, &
730                io_group = 0, io_blocks = 1, iran = -1234567, &
731                masks = 0, maximum_grid_level, &
732                maximum_parallel_io_streams = -1, max_pr_user = 0, &
733                mgcycles = 0, mg_cycles = -1, mg_switch_to_pe0_level = 0, mid, &
734                nlsf = 1000, ntnudge = 100, netcdf_data_format = 2, ngsrb = 2, &
735                nr_timesteps_this_run = 0, &
736                nsor = 20, nsor_ini = 100, n_sor, normalizing_region = 0, &
737                nz_do3d = -9999, pch_index = 0, prt_time_count = 0, &
738                recycling_plane, runnr = 0, &
739                skip_do_avs = 0, subdomain_size, terminate_coupled = 0, &
740                terminate_coupled_remote = 0, timestep_count = 0
741
742    INTEGER ::  dist_nxl(0:1), dist_nxr(0:1), dist_nyn(0:1), dist_nys(0:1), &
743                do2d_no(0:1) = 0, do2d_xy_time_count(0:1), &
744                do2d_xz_time_count(0:1), do2d_yz_time_count(0:1), &
745                do3d_no(0:1) = 0, do3d_time_count(0:1), &
746                domask_no(max_masks,0:1) = 0, domask_time_count(max_masks,0:1),&
747                lad_vertical_gradient_level_ind(10) = -9999, &
748                mask_size(max_masks,3) = -1, mask_size_l(max_masks,3) = -1, &
749                mask_start_l(max_masks,3) = -1, &
750                pt_vertical_gradient_level_ind(10) = -9999, &
751                q_vertical_gradient_level_ind(10) = -9999, &
752                sa_vertical_gradient_level_ind(10) = -9999, &
753                section(100,3), section_xy(100) = -9999, &
754                section_xz(100) = -9999, section_yz(100) = -9999, &
755                ug_vertical_gradient_level_ind(10) = -9999, &
756                vg_vertical_gradient_level_ind(10) = -9999, &
757                subs_vertical_gradient_level_i(10) = -9999
758
759#if defined ( __check )
760    INTEGER :: check_restart = 0
761#endif
762
763    INTEGER, DIMENSION(:), ALLOCATABLE ::  grid_level_count
764
765    INTEGER, DIMENSION(:,:), ALLOCATABLE   ::  mask_i, mask_j, mask_k
766    INTEGER, DIMENSION(:,:), ALLOCATABLE   ::  &
767                mask_i_global, mask_j_global, mask_k_global
768
769    LOGICAL ::  avs_output = .FALSE., &
770                bc_lr_cyc =.TRUE., bc_lr_dirrad = .FALSE., &
771                bc_lr_raddir = .FALSE., bc_ns_cyc = .TRUE., &
772                bc_ns_dirrad = .FALSE., bc_ns_raddir = .FALSE.,&
773                call_psolver_at_all_substeps = .TRUE., &
774                cloud_droplets = .FALSE., cloud_physics = .FALSE., &
775                conserve_volume_flow = .FALSE., constant_diffusion = .FALSE., &
776                constant_heatflux = .TRUE., constant_top_heatflux = .TRUE., &
777                constant_top_momentumflux = .FALSE., &
778                constant_top_salinityflux = .TRUE., &
779                constant_waterflux = .TRUE., create_disturbances = .TRUE., &
780                data_output_2d_on_each_pe = .TRUE., & 
781                dissipation_control = .FALSE., disturbance_created = .FALSE., &
782                do2d_at_begin = .FALSE., do3d_at_begin = .FALSE., &
783                do3d_compress = .FALSE., do_sum = .FALSE., &
784                dp_external = .FALSE., dp_smooth = .FALSE., &
785                drizzle = .FALSE., dt_fixed = .FALSE., &
786                dt_3d_reached, dt_3d_reached_l, exchange_mg = .FALSE., &
787                first_call_lpm = .TRUE., &
788                force_print_header = .FALSE., galilei_transformation = .FALSE.,&
789                humidity = .FALSE., humidity_remote = .FALSE., &
790                inflow_l = .FALSE., inflow_n = .FALSE., &
791                inflow_r = .FALSE., inflow_s = .FALSE., &
792                iso2d_output = .FALSE., large_scale_forcing = .FALSE., &
793                large_scale_subsidence = .FALSE., lsf_surf = .TRUE., &
794                lsf_vert = .TRUE., lptnudge = .FALSE., lqnudge = .FALSE., &
795                lunudge = .FALSE., lvnudge = .FALSE., lwnudge = .FALSE., &
796                masking_method = .FALSE., mg_switch_to_pe0 = .FALSE., &
797                netcdf_output = .FALSE., neutral = .FALSE., nudging = .FALSE., &
798                ocean = .FALSE., on_device = .FALSE., &
799                outflow_l = .FALSE., outflow_n = .FALSE., outflow_r = .FALSE., &
800                outflow_s = .FALSE., passive_scalar = .FALSE., &
801                plant_canopy = .FALSE., prandtl_layer = .TRUE., &
802                precipitation = .FALSE., &
803                radiation = .FALSE., random_heatflux = .FALSE., &
804                run_control_header = .FALSE., run_coupled = .TRUE., &
805                scalar_rayleigh_damping = .TRUE., sloping_surface = .FALSE., &
806                stop_dt = .FALSE., synchronous_exchange = .FALSE., &
807                terminate_run = .FALSE., transpose_compute_overlap = .FALSE., &
808                turbulence = .FALSE., turbulent_inflow = .FALSE., &
809                use_cmax = .TRUE., use_initial_profile_as_reference = .FALSE., &
810                use_prescribed_profile_data = .FALSE., &
811                use_single_reference_value = .FALSE., &
812                use_surface_fluxes = .FALSE., use_top_fluxes = .FALSE., &
813                use_ug_for_galilei_tr = .TRUE., use_upstream_for_tke = .FALSE.,&
814                wall_adjustment = .TRUE., ws_scheme_sca = .FALSE., &
815                ws_scheme_mom = .FALSE.
816
817    LOGICAL ::  data_output_xy(0:1) = .FALSE., data_output_xz(0:1) = .FALSE., &
818                data_output_yz(0:1) = .FALSE.
819
820    REAL ::  advected_distance_x = 0.0, advected_distance_y = 0.0, &
821             alpha_surface = 0.0, atmos_ocean_sign = 1.0, &
822             averaging_interval = 0.0, averaging_interval_pr = 9999999.9, &
823             averaging_interval_sp = 9999999.9, bc_pt_t_val, bc_q_t_val, &
824             bottom_salinityflux = 0.0, &
825             building_height = 50.0, building_length_x = 50.0, &
826             building_length_y = 50.0, building_wall_left = 9999999.9, &
827             building_wall_south = 9999999.9, canyon_height = 50.0, &
828             canyon_width_x = 9999999.9, canyon_width_y = 9999999.9, &
829             canyon_wall_left = 9999999.9, canyon_wall_south = 9999999.9, &
830             cthf = 0.0, cfl_factor = -1.0, cos_alpha_surface, &
831             coupling_start_time = 0.0, disturbance_amplitude = 0.25, &
832             disturbance_energy_limit = 0.01, &
833             disturbance_level_b = -9999999.9, &
834             disturbance_level_t = -9999999.9, &
835             dp_level_b = 0.0, drag_coefficient = 0.0, &
836             dt = -1.0, dt_averaging_input = 0.0, &
837             dt_averaging_input_pr = 9999999.9, dt_coupling = 9999999.9, &
838             dt_data_output = 9999999.9, &
839             dt_data_output_av = 9999999.9, dt_disturb = 9999999.9, &
840             dt_dopr = 9999999.9, dt_dopr_listing = 9999999.9, &
841             dt_dopts = 9999999.9, dt_dosp = 9999999.9, dt_dots = 9999999.9, &
842             dt_do2d_xy = 9999999.9, dt_do2d_xz = 9999999.9, &
843             dt_do2d_yz = 9999999.9, dt_do3d = 9999999.9, dt_dvrp = 9999999.9, &
844             dt_max = 20.0, dt_micro = -1.0, dt_restart = 9999999.9, &
845             dt_run_control = 60.0, dt_3d = -1.0, dz = -1.0, &
846             dz_max = 9999999.9, dz_stretch_factor = 1.08, &
847             dz_stretch_level = 100000.0, e_init = 0.0, e_min = 0.0, &
848             end_time = 0.0, &
849             f = 0.0, fs = 0.0, g = 9.81, inflow_damping_height = 9999999.9, &
850             inflow_damping_width = 9999999.9, kappa = 0.4, km_constant = -1.0,&
851             lad_surface = 0.0, leaf_surface_concentration = 0.0, &
852             mask_scale_x = 1.0, mask_scale_y = 1.0, mask_scale_z = 1.0, &
853             maximum_cpu_time_allowed = 0.0,  &
854             molecular_viscosity = 1.461E-5, &
855             old_dt = 1.0E-10, omega = 7.29212E-5, omega_sor = 1.8, &
856             particle_maximum_age = 9999999.9, &
857             phi = 55.0, prandtl_number = 1.0, &
858             precipitation_amount_interval = 9999999.9, prho_reference, &
859             pt_damping_factor = 0.0, pt_damping_width = 0.0, &
860             pt_reference = 9999999.9, pt_slope_offset = 0.0, &
861             pt_surface = 300.0, pt_surface_initial_change = 0.0, &
862             q_surface = 0.0, q_surface_initial_change = 0.0, &
863             rayleigh_damping_factor = -1.0, rayleigh_damping_height = -1.0, &
864             recycling_width = 9999999.9, residual_limit = 1.0E-4, &
865             restart_time = 9999999.9, rho_reference, rho_surface, &
866             rif_max = 1.0, rif_min = -5.0, roughness_length = 0.1, &
867             sa_surface = 35.0, scalar_exchange_coefficient = 0.0, &
868             simulated_time = 0.0, simulated_time_at_begin, sin_alpha_surface, &
869             skip_time_data_output = 0.0, skip_time_data_output_av = 9999999.9,&
870             skip_time_dopr = 9999999.9, skip_time_dosp = 9999999.9, &
871             skip_time_do2d_xy = 9999999.9, skip_time_do2d_xz = 9999999.9, &
872             skip_time_do2d_yz = 9999999.9, skip_time_do3d = 9999999.9, &
873             surface_heatflux = 9999999.9, surface_pressure = 1013.25, &
874             surface_scalarflux = 9999999.9, surface_waterflux = 9999999.9, &
875             s_surface = 0.0, s_surface_initial_change = 0.0, &
876             termination_time_needed = -1.0, time_coupling = 0.0, &
877             time_disturb = 0.0, time_dopr = 0.0, time_dopr_av = 0.0, &
878             time_dopr_listing = 0.0, time_dopts = 0.0, time_dosp = 0.0, &
879             time_dosp_av = 0.0, time_dots = 0.0, time_do2d_xy = 0.0, &
880             time_do2d_xz = 0.0, time_do2d_yz = 0.0, time_do3d = 0.0, &
881             time_do_av = 0.0, time_do_sla = 0.0, time_dvrp = 0.0, &
882             time_restart = 9999999.9, time_run_control = 0.0,&
883             time_since_reference_point, top_heatflux = 9999999.9, &
884             top_momentumflux_u = 9999999.9, &
885             top_momentumflux_v = 9999999.9, top_salinityflux = 9999999.9, &
886             ug_surface = 0.0, u_bulk = 0.0, u_gtrans = 0.0, &
887             vg_surface = 0.0, vpt_reference = 9999999.9, &
888             v_bulk = 0.0, v_gtrans = 0.0, wall_adjustment_factor = 1.8, &
889             z_max_do2d = -1.0, z0h_factor = 1.0
890
891    REAL ::  do2d_xy_last_time(0:1) = -1.0, do2d_xz_last_time(0:1) = -1.0, &
892             do2d_yz_last_time(0:1) = -1.0, dpdxy(1:2) = 0.0, &
893             dt_domask(max_masks) = 9999999.9, lad_vertical_gradient(10) = 0.0,&
894             lad_vertical_gradient_level(10) = -9999999.9, &
895             mask_scale(3), &
896             pt_vertical_gradient(10) = 0.0, &
897             pt_vertical_gradient_level(10) = -9999999.9, &
898             q_vertical_gradient(10) = 0.0, &
899             q_vertical_gradient_level(10) = -1.0, &
900             s_vertical_gradient(10) = 0.0, &
901             s_vertical_gradient_level(10) = -1.0, &
902             sa_vertical_gradient(10) = 0.0, &
903             sa_vertical_gradient_level(10) = -9999999.9, &
904             skip_time_domask(max_masks) = 9999999.9, threshold(20) = 0.0, &
905             time_domask(max_masks) = 0.0, &
906             tsc(10) = (/ 1.0, 1.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0 /), &
907             u_profile(100) = 9999999.9, uv_heights(100) = 9999999.9, &
908             v_profile(100) = 9999999.9, &
909             ug_vertical_gradient(10) = 0.0, &
910             ug_vertical_gradient_level(10) = -9999999.9, &
911             vg_vertical_gradient(10) = 0.0, &
912             vg_vertical_gradient_level(10) = -9999999.9, &
913             volume_flow(1:2) = 0.0, volume_flow_area(1:2) = 0.0, &
914             volume_flow_initial(1:2) = 0.0, wall_heatflux(0:4) = 0.0, &
915             wall_humidityflux(0:4) = 0.0, wall_nrflux(0:4) = 0.0, &
916             wall_qflux(0:4) = 0.0, wall_qrflux(0:4) = 0.0, &
917             wall_salinityflux(0:4) = 0.0, wall_scalarflux(0:4) = 0.0, &
918             subs_vertical_gradient(10) = 0.0, &
919             subs_vertical_gradient_level(10) = -9999999.9
920
921    REAL, DIMENSION(:), ALLOCATABLE ::  dp_smooth_factor
922
923    REAL, DIMENSION(max_masks,mask_xyz_dimension) :: &
924        mask_x = -1.0, mask_y = -1.0, mask_z = -1.0
925    REAL, DIMENSION(max_masks,3) ::                  &
926        mask_x_loop = -1.0, mask_y_loop = -1.0, mask_z_loop = -1.0
927   
928!
929!--    internal mask arrays ("mask,dimension,selection")
930       REAL, DIMENSION(:,:,:), ALLOCATABLE ::  mask, mask_loop
931
932    SAVE
933
934 END MODULE control_parameters
935
936
937
938
939 MODULE cpulog
940
941!------------------------------------------------------------------------------!
942! Description:
943! ------------
944! Definition of variables for cpu-time measurements
945!------------------------------------------------------------------------------!
946
947    REAL ::  initial_wallclock_time
948
949    TYPE logpoint
950       REAL               ::  isum, ivect, mean, mtime, mtimevec, sum, vector
951       INTEGER            ::  counts
952       CHARACTER (LEN=20) ::  place
953    END TYPE logpoint
954
955    TYPE(logpoint), DIMENSION(100) ::  log_point = logpoint( 0.0, 0.0, 0.0,   &
956                                       0.0, 0.0, 0.0, 0.0, 0, ' ' ),          &
957                                       log_point_s = logpoint( 0.0, 0.0, 0.0, &
958                                       0.0, 0.0, 0.0, 0.0, 0, ' ' )
959
960    SAVE
961
962 END MODULE cpulog
963
964
965
966
967 MODULE dvrp_variables
968
969!------------------------------------------------------------------------------!
970! Description:
971! ------------
972! Definition of variables used with dvrp-software
973!------------------------------------------------------------------------------!
974
975    CHARACTER (LEN=10) ::  dvrp_output = 'rtsp', particle_color = 'none', &
976                           particle_dvrpsize = 'none'
977
978    CHARACTER (LEN=20), DIMENSION(10) ::  mode_dvrp = &
979                                     (/ ( '                    ', i9 = 1,10 ) /)
980
981    CHARACTER (LEN=80) ::  dvrp_directory = 'default',                    &
982                           dvrp_file      = 'default',                    &
983                           dvrp_host      = 'origin.rvs.uni-hannover.de', &
984                           dvrp_password  = '********',                   &
985                           dvrp_username  = ' '
986
987    INTEGER ::  cluster_size = 1, dvrp_colortable_entries = 4,                 &
988                dvrp_colortable_entries_prt = 22, islice_dvrp,                 &
989                nx_dvrp, nxl_dvrp, nxr_dvrp, ny_dvrp, nyn_dvrp, nys_dvrp,      &
990                nz_dvrp, pathlines_fadeintime = 5, pathlines_fadeouttime = 5,  &
991                pathlines_linecount = 1000, pathlines_maxhistory = 40,         &
992                pathlines_wavecount = 10, pathlines_wavetime = 50,             &
993                vc_gradient_normals = 0, vc_mode = 0, vc_size_x = 2,           &
994                vc_size_y = 2, vc_size_z = 2
995
996    INTEGER, DIMENSION(10) ::  slicer_position_dvrp
997
998    LOGICAL ::  cyclic_dvrp = .FALSE., dvrp_overlap, dvrp_total_overlap, &
999                local_dvrserver_running, lock_steering_update = .FALSE., &
1000                use_seperate_pe_for_dvrp_output = .FALSE.
1001
1002    REAL    ::  clip_dvrp_l = 9999999.9, clip_dvrp_n = 9999999.9, &
1003                clip_dvrp_r = 9999999.9, clip_dvrp_s = 9999999.9, &
1004                superelevation = 1.0, superelevation_x = 1.0,     &
1005                superelevation_y = 1.0, vc_alpha = 38.0
1006
1007    REAL, DIMENSION(2) ::  color_interval = (/ 0.0, 1.0 /), &
1008                           dvrpsize_interval = (/ 0.0, 1.0 /)
1009
1010    REAL, DIMENSION(3) ::  groundplate_color = (/ 0.0, 0.6, 0.0 /), &
1011                           topography_color = (/ 0.8, 0.7, 0.6 /)
1012
1013#if defined( __decalpha )
1014    REAL, DIMENSION(2,10)  ::  slicer_range_limits_dvrp = RESHAPE( (/       &
1015                                -1.0, 1.0, -1.0, 1.0, -1.0, 1.0, -1.0, 1.0, &
1016                                -1.0, 1.0, -1.0, 1.0, -1.0, 1.0, -1.0, 1.0, &
1017                                -1.0, 1.0, -1.0, 1.0 /), (/ 2, 10 /) )
1018
1019    REAL, DIMENSION(3,10)  ::  isosurface_color = RESHAPE( (/                  &
1020                                0.9, 0.9, 0.9,  0.8, 0.1, 0.1,  0.1, 0.1, 0.8, &
1021                                0.1, 0.8, 0.1,  0.6, 0.1, 0.1,  0.1, 0.1, 0.6, &
1022                                0.1, 0.6, 0.1,  0.4, 0.1, 0.1,  0.1, 0.1, 0.4, &
1023                                0.1, 0.4, 0.1 /), (/ 3, 10 /) )
1024
1025    REAL(4), DIMENSION(2,100) ::  interval_values_dvrp, interval_h_dvrp =      &
1026                                  RESHAPE( (/ 270.0, 225.0, 225.0, 180.0,      &
1027                                               70.0,  25.0,  25.0, -25.0,      &
1028                                              ( 0.0, i9 = 1, 192 ) /),         &
1029                                           (/ 2, 100 /) ),                     &
1030                                  interval_l_dvrp = 0.5, interval_s_dvrp = 1.0,&
1031                                  interval_a_dvrp = 0.0,                       &
1032                                  interval_values_dvrp_prt,                    &
1033                                  interval_h_dvrp_prt = RESHAPE(               &
1034                                  (/ 270.0, 225.0, 225.0, 180.0, 70.0, 25.0,   &
1035                                     25.0, -25.0, ( 0.0, i9 = 1, 192 ) /),     &
1036                                                  (/ 2, 100 /) ),              &
1037                                  interval_l_dvrp_prt = 0.5,                   &
1038                                  interval_s_dvrp_prt = 1.0,                   &
1039                                  interval_a_dvrp_prt = 0.0
1040#else
1041    REAL, DIMENSION(2,10)     ::  slicer_range_limits_dvrp
1042
1043    REAL, DIMENSION(3,10)     ::  isosurface_color
1044
1045    REAL(4), DIMENSION(2,100) ::  interval_values_dvrp,                       &
1046                                  interval_values_dvrp_prt, interval_h_dvrp,  &
1047                                  interval_h_dvrp_prt, interval_l_dvrp = 0.5, &
1048                                  interval_l_dvrp_prt = 0.5, interval_s_dvrp = 1.0, &
1049                                  interval_s_dvrp_prt = 1.0, interval_a_dvrp = 0.0, &
1050                                  interval_a_dvrp_prt = 0.0
1051
1052    DATA  slicer_range_limits_dvrp / -1.0, 1.0, -1.0, 1.0, -1.0, 1.0, &
1053                                     -1.0, 1.0, -1.0, 1.0, -1.0, 1.0, &
1054                                     -1.0, 1.0, -1.0, 1.0, -1.0, 1.0, &
1055                                     -1.0, 1.0 /
1056
1057    DATA  isosurface_color / 0.9, 0.9, 0.9,  0.8, 0.1, 0.1,  0.1, 0.1, 0.8, &
1058                             0.1, 0.8, 0.1,  0.6, 0.1, 0.1,  0.1, 0.1, 0.6, &
1059                             0.1, 0.6, 0.1,  0.4, 0.1, 0.1,  0.1, 0.1, 0.4, &
1060                             0.1, 0.4, 0.1 /
1061
1062    DATA  interval_h_dvrp / 270.0, 225.0, 225.0, 180.0, 70.0, 25.0, &
1063                            25.0, -25.0, 192 * 0.0 /
1064
1065    DATA  interval_h_dvrp_prt / 270.0, 225.0, 225.0, 180.0, 70.0, 25.0, &
1066                                25.0, -25.0, 192 * 0.0 /
1067#endif
1068
1069    REAL(4), DIMENSION(:), ALLOCATABLE ::  xcoor_dvrp, ycoor_dvrp, zcoor_dvrp
1070
1071    TYPE steering
1072       CHARACTER (LEN=24) ::  name
1073       REAL(4)            ::  min, max
1074       INTEGER            ::  imin, imax
1075    END TYPE steering
1076
1077    TYPE(steering), DIMENSION(:), ALLOCATABLE ::  steering_dvrp
1078
1079    SAVE
1080
1081 END MODULE dvrp_variables
1082
1083
1084
1085
1086 MODULE grid_variables
1087
1088!------------------------------------------------------------------------------!
1089! Description:
1090! ------------
1091! Definition of grid spacings
1092!------------------------------------------------------------------------------!
1093
1094    REAL ::  ddx, ddx2, dx = 1.0, dx2, ddy, ddy2, dy = 1.0, dy2
1095
1096    REAL, DIMENSION(:), ALLOCATABLE ::  ddx2_mg, ddy2_mg
1097
1098    REAL, DIMENSION(:,:), ALLOCATABLE ::  fwxm, fwxp, fwym, fwyp, fxm, fxp,   &
1099                                          fym, fyp, wall_e_x, wall_e_y,       &
1100                                          wall_u, wall_v, wall_w_x, wall_w_y, &
1101                                          zu_s_inner, zw_w_inner
1102
1103    SAVE
1104
1105 END MODULE grid_variables
1106
1107
1108
1109
1110 MODULE indices
1111
1112!------------------------------------------------------------------------------!
1113! Description:
1114! ------------
1115! Definition of array bounds, number of gridpoints, and wall flag arrays
1116!------------------------------------------------------------------------------!
1117
1118    INTEGER ::  i_left, i_right, j_north, j_south, nbgp = 3, ngp_sums, nnx,    &
1119                nx = 0, nx_a, nx_o, nxl, nxlg, nxlu, nxr, nxrg, nx_on_file,    &
1120                nny, ny = 0, ny_a, ny_o, nyn, nyng, nys, nysg, nysv,           &
1121                ny_on_file, nnz, nz = 0, nzb, nzb_diff, nzb_max, nzt, nzt_diff
1122
1123
1124    INTEGER( KIND = SELECTED_INT_KIND(18) ), DIMENSION(:), ALLOCATABLE ::      &
1125                ngp_3d, ngp_3d_inner   ! need to have 64 bit for grids > 2E9
1126
1127    INTEGER, DIMENSION(:), ALLOCATABLE ::                                      &
1128                ngp_2dh, nxl_mg, nxr_mg, nyn_mg, nys_mg, nzt_mg
1129
1130
1131    INTEGER, DIMENSION(:,:), ALLOCATABLE :: ngp_2dh_outer, ngp_2dh_s_inner,    &
1132                mg_loc_ind, nzb_diff_s_inner, nzb_diff_s_outer, nzb_diff_u,    &
1133                nzb_diff_v, nzb_inner, nzb_outer, nzb_s_inner, nzb_s_outer,    &
1134                nzb_u_inner, nzb_u_outer, nzb_v_inner, nzb_v_outer,            &
1135                nzb_w_inner, nzb_w_outer, nzb_2d
1136
1137    INTEGER, DIMENSION(:,:,:), POINTER ::  flags
1138
1139    INTEGER, DIMENSION(:,:,:), ALLOCATABLE ::  wall_flags_0, wall_flags_00
1140
1141    INTEGER, DIMENSION(:,:,:), ALLOCATABLE,  TARGET ::                         &
1142                wall_flags_1, wall_flags_2, wall_flags_3, wall_flags_4,        &
1143                wall_flags_5, wall_flags_6, wall_flags_7, wall_flags_8,        &
1144                wall_flags_9, wall_flags_10
1145
1146    REAL, DIMENSION(:,:,:), ALLOCATABLE ::  rflags_s_inner, rflags_invers
1147
1148    SAVE
1149
1150 END MODULE indices
1151
1152
1153
1154
1155 MODULE interfaces
1156
1157!------------------------------------------------------------------------------!
1158! Description:
1159! ------------
1160! Interfaces for special subroutines which use optional parameters
1161!------------------------------------------------------------------------------!
1162
1163    INTERFACE
1164
1165       SUBROUTINE cpu_log( log_event, place, modus, barrierwait )
1166
1167          USE cpulog
1168
1169          CHARACTER (LEN=*)           ::  modus, place
1170          CHARACTER (LEN=*), OPTIONAL ::  barrierwait
1171          TYPE(logpoint)              ::  log_event
1172
1173       END SUBROUTINE cpu_log
1174
1175    END INTERFACE
1176
1177
1178
1179    INTERFACE
1180
1181       SUBROUTINE global_min_max ( i1, i2, j1, j2, k1, k2, feld, mode, offset, &
1182                                   wert, wert_ijk, wert1, wert1_ijk )
1183          CHARACTER (LEN=*), INTENT(IN) ::  mode
1184          INTEGER, INTENT(IN)           ::  i1, i2, j1, j2, k1, k2
1185          INTEGER                       ::  wert_ijk(3)
1186          INTEGER, OPTIONAL             ::  wert1_ijk(3)
1187          REAL                          ::  offset, wert
1188          REAL, OPTIONAL                ::  wert1
1189          REAL, INTENT(IN)              ::  feld(i1:i2,j1:j2,k1:k2)
1190
1191       END SUBROUTINE global_min_max
1192
1193    END INTERFACE
1194
1195    SAVE
1196
1197 END MODULE interfaces
1198
1199
1200
1201 MODULE pointer_interfaces
1202
1203!------------------------------------------------------------------------------!
1204! Description:
1205! ------------
1206! Interfaces for subroutines with pointer arguments called in
1207! prognostic_equations
1208!------------------------------------------------------------------------------!
1209
1210    INTERFACE
1211
1212       SUBROUTINE advec_s_bc( sk, sk_char )
1213
1214          CHARACTER (LEN=*), INTENT(IN)   ::  sk_char
1215#if defined( __nopointer )
1216          REAL, DIMENSION(:,:,:) ::  sk
1217#else
1218          REAL, DIMENSION(:,:,:), POINTER ::  sk
1219#endif
1220       END SUBROUTINE advec_s_bc
1221
1222    END INTERFACE
1223
1224
1225    SAVE
1226
1227 END MODULE pointer_interfaces
1228
1229
1230
1231
1232 MODULE model_1d
1233
1234!------------------------------------------------------------------------------!
1235! Description:
1236! ------------
1237! Definition of variables for the 1D-model
1238!------------------------------------------------------------------------------!
1239
1240    INTEGER ::  current_timestep_number_1d = 0, damp_level_ind_1d
1241
1242    LOGICAL ::  run_control_header_1d = .FALSE., stop_dt_1d = .FALSE. 
1243
1244    REAL ::     damp_level_1d = -1.0, dt_1d = 60.0, dt_max_1d = 300.0, &
1245                dt_pr_1d = 9999999.9, dt_run_control_1d = 60.0, &
1246                end_time_1d = 864000.0, old_dt_1d = 1.0E-10, &
1247                qs1d, simulated_time_1d = 0.0, time_pr_1d = 0.0, &
1248                time_run_control_1d = 0.0, ts1d, us1d, usws1d, &
1249                vsws1d, z01d, z0h1d
1250
1251
1252    REAL, DIMENSION(:), ALLOCATABLE ::  e1d, e1d_p, kh1d, km1d, l_black, l1d,  &
1253                                        rif1d, te_e, te_em, te_u, te_um, te_v, &
1254                                        te_vm, u1d, u1d_p, v1d, v1d_p
1255
1256    SAVE
1257
1258 END MODULE model_1d
1259
1260
1261
1262
1263 MODULE netcdf_control
1264
1265!------------------------------------------------------------------------------!
1266! Description:
1267! ------------
1268! Definition of parameters and variables for netcdf control.
1269!------------------------------------------------------------------------------!
1270
1271    USE control_parameters
1272#if defined( __netcdf )
1273    USE netcdf
1274#endif
1275
1276    INTEGER, PARAMETER ::  dopr_norm_num = 7, dopts_num = 29, dots_max = 100
1277
1278    INTEGER ::  dots_num = 23
1279
1280    CHARACTER (LEN=6), DIMENSION(dopr_norm_num) ::  dopr_norm_names =   &
1281         (/ 'wpt0  ', 'ws2   ', 'tsw2  ', 'ws3   ', 'ws2tsw', 'wstsw2', &
1282            'z_i   ' /)
1283
1284    CHARACTER (LEN=6), DIMENSION(dopr_norm_num) ::  dopr_norm_longnames = &
1285         (/ 'wpt0  ', 'w*2   ', 't*w2  ', 'w*3   ', 'w*2t*w', 'w*t*w2',   &
1286            'z_i   ' /)
1287
1288    CHARACTER (LEN=7), DIMENSION(dopts_num) :: dopts_label = &
1289          (/ 'tnpt   ', 'x_     ', 'y_     ', 'z_     ', 'z_abs  ', 'u      ', &
1290             'v      ', 'w      ', 'u"     ', 'v"     ', 'w"     ', 'npt_up ', &
1291             'w_up   ', 'w_down ', 'radius ', 'r_min  ', 'r_max  ', 'npt_max', &
1292             'npt_min', 'x*2    ', 'y*2    ', 'z*2    ', 'u*2    ', 'v*2    ', &
1293             'w*2    ', 'u"2    ', 'v"2    ', 'w"2    ', 'npt*2  ' /)
1294
1295    CHARACTER (LEN=7), DIMENSION(dopts_num) :: dopts_unit = &
1296          (/ 'number ', 'm      ', 'm      ', 'm      ', 'm      ', 'm/s    ', &
1297             'm/s    ', 'm/s    ', 'm/s    ', 'm/s    ', 'm/s    ', 'number ', &
1298             'm/s    ', 'm/s    ', 'm      ', 'm      ', 'm      ', 'number ', &
1299             'number ', 'm2     ', 'm2     ', 'm2     ', 'm2/s2  ', 'm2/s2  ', &
1300             'm2/s2  ', 'm2/s2  ', 'm2/s2  ', 'm2/s2  ', 'number2' /)
1301
1302    CHARACTER (LEN=7), DIMENSION(dots_max) :: dots_label = &
1303          (/ 'E      ', 'E*     ', 'dt     ', 'u*     ', 'th*    ', 'umax   ', &
1304             'vmax   ', 'wmax   ', 'div_new', 'div_old', 'z_i_wpt', 'z_i_pt ', &
1305             'w*     ', 'w"pt"0 ', 'w"pt"  ', 'wpt    ', 'pt(0)  ', 'pt(zp) ', &
1306             'w"u"0  ', 'w"v"0  ', 'w"q"0  ', 'mo_L   ', 'q*     ',            &
1307             ( 'unknown', i9 = 1, dots_max-23 ) /)
1308
1309    CHARACTER (LEN=7), DIMENSION(dots_max) :: dots_unit = &
1310          (/ 'm2/s2  ', 'm2/s2  ', 's      ', 'm/s    ', 'K      ', 'm/s    ', &
1311             'm/s    ', 'm/s    ', 's-1    ', 's-1    ', 'm      ', 'm      ', &
1312             'm/s    ', 'K m/s  ', 'K m/s  ', 'K m/s  ', 'K      ', 'K      ', &
1313             'm2/s2  ', 'm2/s2  ', 'kg m/s ', 'm      ', 'kg/kg  ',            &
1314             ( 'unknown', i9 = 1, dots_max-23 ) /)
1315
1316    CHARACTER (LEN=9), DIMENSION(300) ::  dopr_unit = 'unknown'
1317
1318    CHARACTER (LEN=7), DIMENSION(0:1,100) ::  do2d_unit, do3d_unit
1319
1320    CHARACTER (LEN=16), DIMENSION(25) ::  prt_var_names = &
1321          (/ 'pt_age          ', 'pt_dvrp_size    ', 'pt_origin_x     ', &
1322             'pt_origin_y     ', 'pt_origin_z     ', 'pt_radius       ', &
1323             'pt_speed_x      ', 'pt_speed_y      ', 'pt_speed_z      ', &
1324             'pt_weight_factor', 'pt_x            ', 'pt_y            ', &
1325             'pt_z            ', 'pt_color        ', 'pt_group        ', &
1326             'pt_tailpoints   ', 'pt_tail_id      ', 'pt_density_ratio', &
1327             'pt_exp_arg      ', 'pt_exp_term     ', 'not_used        ', &
1328             'not_used        ', 'not_used        ', 'not_used        ', &
1329             'not_used        ' /)
1330
1331    CHARACTER (LEN=16), DIMENSION(25) ::  prt_var_units = &
1332          (/ 'seconds         ', 'meters          ', 'meters          ', &
1333             'meters          ', 'meters          ', 'meters          ', &
1334             'm/s             ', 'm/s             ', 'm/s             ', &
1335             'factor          ', 'meters          ', 'meters          ', &
1336             'meters          ', 'none            ', 'none            ', &
1337             'none            ', 'none            ', 'ratio           ', &
1338             'none            ', 'none            ', 'not_used        ', &
1339             'not_used        ', 'not_used        ', 'not_used        ', &
1340             'not_used        ' /)
1341
1342    INTEGER ::  id_dim_prtnum, id_dim_time_pr, id_dim_time_prt, &
1343                id_dim_time_pts, id_dim_time_sp, id_dim_time_ts, id_dim_x_sp, &
1344                id_dim_y_sp, id_dim_zu_sp, id_dim_zw_sp, id_set_pr, &
1345                id_set_prt, id_set_pts, id_set_sp, id_set_ts, id_var_prtnum, &
1346                id_var_rnop_prt, id_var_time_pr, id_var_time_prt, &
1347                id_var_time_pts, id_var_time_sp, id_var_time_ts, id_var_x_sp, &
1348                id_var_y_sp, id_var_zu_sp, id_var_zw_sp, nc_stat
1349
1350    INTEGER, DIMENSION(0:1) ::  id_dim_time_xy, id_dim_time_xz, &
1351                id_dim_time_yz, id_dim_time_3d, id_dim_x_xy, id_dim_xu_xy, &
1352                id_dim_x_xz, id_dim_xu_xz, id_dim_x_yz, id_dim_xu_yz, &
1353                id_dim_x_3d, id_dim_xu_3d, id_dim_y_xy, id_dim_yv_xy, &
1354                id_dim_y_xz, id_dim_yv_xz, id_dim_y_yz, id_dim_yv_yz, &
1355                id_dim_y_3d, id_dim_yv_3d, id_dim_zu_xy, id_dim_zu1_xy, &
1356                id_dim_zu_xz, id_dim_zu_yz, id_dim_zu_3d, id_dim_zw_xy, &
1357                id_dim_zw_xz, id_dim_zw_yz, id_dim_zw_3d, id_set_xy, &
1358                id_set_xz, id_set_yz, id_set_3d, id_var_ind_x_yz, &
1359                id_var_ind_y_xz, id_var_ind_z_xy, id_var_time_xy, &
1360                id_var_time_xz, id_var_time_yz, id_var_time_3d, id_var_x_xy, &
1361                id_var_xu_xy, id_var_x_xz, id_var_xu_xz, id_var_x_yz, &
1362                id_var_xu_yz, id_var_x_3d, id_var_xu_3d, id_var_y_xy, &
1363                id_var_yv_xy, id_var_y_xz, id_var_yv_xz, id_var_y_yz, &
1364                id_var_yv_yz, id_var_y_3d, id_var_yv_3d, id_var_zusi_xy, &
1365                id_var_zusi_3d, id_var_zu_xy, id_var_zu1_xy, id_var_zu_xz, &
1366                id_var_zu_yz, id_var_zu_3d, id_var_zwwi_xy, id_var_zwwi_3d, &
1367                id_var_zw_xy, id_var_zw_xz, id_var_zw_yz, id_var_zw_3d
1368
1369    INTEGER, DIMENSION(10)  ::  id_var_dospx, id_var_dospy
1370    INTEGER, DIMENSION(20)  ::  id_var_prt
1371    INTEGER, DIMENSION(11)  ::  nc_precision
1372    INTEGER, DIMENSION(dopr_norm_num) ::  id_var_norm_dopr
1373
1374    INTEGER, DIMENSION(dopts_num,0:10) ::  id_var_dopts
1375    INTEGER, DIMENSION(0:1,100)        ::  id_var_do2d, id_var_do3d
1376    INTEGER, DIMENSION(100,0:9)        ::  id_dim_z_pr, id_var_dopr, &
1377                                           id_var_z_pr
1378    INTEGER, DIMENSION(dots_max,0:9)   ::  id_var_dots
1379
1380!
1381!-- masked output
1382    CHARACTER (LEN=7), DIMENSION(max_masks,0:1,100) ::  domask_unit
1383
1384    LOGICAL ::  output_for_t0 = .FALSE.
1385
1386    INTEGER, DIMENSION(1:max_masks,0:1) ::  id_dim_time_mask, id_dim_x_mask, &
1387                id_dim_xu_mask, id_dim_y_mask, id_dim_yv_mask, id_dim_zu_mask, &
1388                id_dim_zw_mask, &
1389                id_set_mask, &
1390                id_var_time_mask, id_var_x_mask, id_var_xu_mask, &
1391                id_var_y_mask, id_var_yv_mask, id_var_zu_mask, id_var_zw_mask, &
1392                id_var_zusi_mask, id_var_zwwi_mask
1393
1394    INTEGER, DIMENSION(1:max_masks,0:1,100)         ::  id_var_domask
1395
1396    SAVE
1397
1398 END MODULE netcdf_control
1399
1400
1401
1402 MODULE particle_attributes
1403
1404!------------------------------------------------------------------------------!
1405! Description:
1406! ------------
1407! Definition of variables used to compute particle transport
1408!------------------------------------------------------------------------------!
1409
1410    USE precision_kind
1411
1412    CHARACTER (LEN=15)  ::  bc_par_lr = 'cyclic',  bc_par_ns = 'cyclic', &
1413                            bc_par_b  = 'reflect', bc_par_t  = 'absorb', &
1414                            collision_kernel = 'none'
1415
1416#if defined( __parallel )
1417    INTEGER ::  mpi_particle_type
1418#endif
1419    INTEGER ::  deleted_particles = 0, deleted_tails = 0,                      &
1420                dissipation_classes = 10, ibc_par_lr,                          &
1421                ibc_par_ns, ibc_par_b, ibc_par_t, iran_part = -1234567,        &
1422                maximum_number_of_particles = 1000,                            &
1423                maximum_number_of_tailpoints = 100,                            &
1424                maximum_number_of_tails = 0,                                   &
1425                number_of_initial_particles = 0, number_of_particles = 0,      &
1426                number_of_particle_groups = 1, number_of_tails = 0,            &
1427                number_of_initial_tails = 0, offset_ocean_nzt = 0,             &
1428                offset_ocean_nzt_m1 = 0, particles_per_point = 1,              &
1429                particle_file_count = 0, radius_classes = 20,                  &
1430                skip_particles_for_tail = 100, sort_count = 0,                 &
1431                total_number_of_particles, total_number_of_tails = 0,          &
1432                trlp_count_sum, trlp_count_recv_sum, trrp_count_sum,           &
1433                trrp_count_recv_sum, trsp_count_sum, trsp_count_recv_sum,      &
1434                trnp_count_sum, trnp_count_recv_sum
1435
1436    INTEGER, PARAMETER ::  max_number_of_particle_groups = 10
1437
1438    INTEGER, DIMENSION(:), ALLOCATABLE     ::  new_tail_id
1439    INTEGER, DIMENSION(:,:,:), ALLOCATABLE ::  prt_count, prt_start_index
1440
1441    LOGICAL ::  hall_kernel = .FALSE., palm_kernel = .FALSE.,                  &
1442                particle_advection = .FALSE., random_start_position = .FALSE., &
1443                read_particles_from_restartfile = .TRUE.,                      &
1444                uniform_particles = .TRUE., use_kernel_tables = .FALSE.,       &
1445                use_particle_tails = .FALSE., use_sgs_for_particles = .FALSE., &
1446                wang_kernel = .FALSE., write_particle_statistics = .FALSE.
1447
1448    LOGICAL, DIMENSION(max_number_of_particle_groups) ::                       &
1449                vertical_particle_advection = .TRUE.
1450
1451    LOGICAL, DIMENSION(:), ALLOCATABLE ::  particle_mask, tail_mask
1452
1453    REAL    ::  c_0 = 3.0, dt_min_part = 0.0002, dt_prel = 9999999.9,          &
1454                dt_sort_particles = 0.0, dt_write_particle_data = 9999999.9,   &
1455                dvrp_psize = 9999999.9, end_time_prel = 9999999.9,             &
1456                initial_weighting_factor = 1.0,                                &
1457                maximum_tailpoint_age = 100000.0,                              &
1458                minimum_tailpoint_distance = 0.0,                              &
1459                particle_advection_start = 0.0, sgs_wfu_part = 0.3333333,      &
1460                sgs_wfv_part = 0.3333333, sgs_wfw_part = 0.3333333,            &
1461                time_prel = 0.0, time_sort_particles = 0.0,                    &
1462                time_write_particle_data = 0.0
1463
1464    REAL, DIMENSION(max_number_of_particle_groups) ::  &
1465                density_ratio = 9999999.9, pdx = 9999999.9, pdy = 9999999.9, &
1466                pdz = 9999999.9, psb = 9999999.9, psl = 9999999.9,           &
1467                psn = 9999999.9, psr = 9999999.9, pss = 9999999.9,           &
1468                pst = 9999999.9, radius = 9999999.9
1469
1470    REAL, DIMENSION(:,:,:), ALLOCATABLE ::  particle_tail_coordinates
1471
1472
1473    TYPE particle_type
1474       SEQUENCE
1475       REAL    ::  age, age_m, dt_sum, dvrp_psize, e_m, origin_x, origin_y, &
1476                   origin_z, radius, rvar1, rvar2, rvar3, speed_x, speed_y, &
1477                   speed_z, weight_factor, x, y, z
1478       INTEGER ::  class, group, tailpoints, tail_id
1479    END TYPE particle_type
1480
1481    TYPE(particle_type), DIMENSION(:), ALLOCATABLE ::  initial_particles
1482    TYPE(particle_type), DIMENSION(:), ALLOCATABLE, TARGET ::  part_1, part_2
1483    TYPE(particle_type), DIMENSION(:), POINTER  ::  particles
1484
1485    TYPE particle_groups_type
1486       SEQUENCE
1487       REAL    ::  density_ratio, radius, exp_arg, exp_term
1488    END TYPE particle_groups_type
1489
1490    TYPE(particle_groups_type), DIMENSION(max_number_of_particle_groups) ::&
1491                   particle_groups
1492
1493    SAVE
1494
1495 END MODULE particle_attributes
1496
1497
1498
1499
1500
1501 MODULE pegrid
1502
1503!------------------------------------------------------------------------------!
1504! Description:
1505! ------------
1506! Definition of variables which define processor topology and the exchange of
1507! ghost point layers. This modules must be placed in all routines which contain
1508! MPI-calls.
1509!------------------------------------------------------------------------------!
1510
1511#if defined( __parallel ) && ! defined ( __check )
1512#if defined( __lc )
1513    USE MPI
1514#else
1515    INCLUDE "mpif.h"
1516#endif
1517#endif
1518    CHARACTER(LEN=2) ::  send_receive = 'al'
1519    CHARACTER(LEN=5) ::  myid_char = ''
1520    INTEGER          ::  acc_rank, comm1dx, comm1dy, comm2d, comm_inter,       &
1521                         comm_palm, id_inflow = 0, id_recycling = 0, ierr,     &
1522                         myid = 0, myidx = 0, myidy = 0, ndim = 2, ngp_a,      &
1523                         ngp_o, ngp_xy, ngp_y, npex = -1, npey = -1,           &
1524                         numprocs = 1, numprocs_previous_run = -1,             &
1525                         num_acc_per_node = 0, pleft, pnorth, pright, psouth,  &
1526                         req_count = 0, sendrecvcount_xy, sendrecvcount_yz,    &
1527                         sendrecvcount_zx, sendrecvcount_zyd,                  &
1528                         sendrecvcount_yxd, target_id, tasks_per_node = -9999, &
1529                         threads_per_task = 1, type_x, type_x_int, type_xy,    &
1530                         type_y, type_y_int
1531
1532    INTEGER          ::  pdims(2) = 1, req(100)
1533
1534    INTEGER, DIMENSION(:,:), ALLOCATABLE ::  hor_index_bounds, &
1535                                             hor_index_bounds_previous_run
1536
1537    LOGICAL ::  background_communication =.FALSE., collective_wait = .FALSE., &
1538                sendrecv_in_background = .FALSE.
1539
1540#if defined( __parallel )
1541#if defined( __mpi2 )
1542    CHARACTER (LEN=MPI_MAX_PORT_NAME) ::  port_name
1543#endif
1544
1545    INTEGER ::  ibuf(12), pcoord(2)
1546
1547#if ! defined ( __check )
1548    INTEGER ::  status(MPI_STATUS_SIZE)
1549    INTEGER, DIMENSION(MPI_STATUS_SIZE,100) ::  wait_stat
1550#endif
1551
1552
1553    INTEGER, DIMENSION(:), ALLOCATABLE ::  ngp_yz, type_xz, type_yz
1554
1555    LOGICAL ::  left_border_pe  = .FALSE., north_border_pe = .FALSE., &
1556                reorder = .TRUE., right_border_pe = .FALSE.,          &
1557                south_border_pe = .FALSE.
1558
1559    LOGICAL, DIMENSION(2) ::  cyclic = (/ .TRUE. , .TRUE. /), &
1560                              remain_dims
1561#endif
1562
1563    SAVE
1564
1565 END MODULE pegrid
1566
1567
1568
1569
1570 MODULE profil_parameter
1571
1572!------------------------------------------------------------------------------!
1573! Description:
1574! ------------
1575! Definition of variables which control PROFIL-output
1576!------------------------------------------------------------------------------!
1577
1578    INTEGER, PARAMETER ::  crmax = 100
1579
1580    CHARACTER (LEN=20), DIMENSION(20) ::  cross_ts_profiles = &
1581                           (/ ' E E*               ', ' dt                 ', &
1582                              ' u* w*              ', ' th*                ', &
1583                              ' umax vmax wmax     ', ' div_old div_new    ', &
1584                              ' z_i_wpt z_i_pt     ', ' w"pt"0 w"pt" wpt   ', &
1585                              ' pt(0) pt(zp)       ', ' splux spluy spluz  ', &
1586                              ' L                  ',                         &
1587                            ( '                    ', i9 = 1, 9 ) /)
1588
1589    CHARACTER (LEN=100), DIMENSION(crmax) ::  cross_profiles = &
1590                           (/ ' u v                           ', &
1591                              ' pt                            ', &
1592                              ' w"pt" w*pt* w*pt*BC wpt wptBC ', &
1593                              ' w"u" w*u* wu w"v" w*v* wv     ', &
1594                              ' km kh                         ', &
1595                              ' l                             ', &
1596                         ( '                               ', i9 = 1, 94 ) /)
1597
1598    INTEGER ::  profile_columns = 2, profile_rows = 3, profile_number = 0
1599
1600    INTEGER ::  cross_ts_numbers(crmax,crmax) = 0, &
1601                cross_ts_number_count(crmax) = 0, &
1602                dopr_index(300) = 0, dopr_initial_index(300) = 0, &
1603                dots_crossindex(100) = 0, dots_index(100) = 0
1604               
1605
1606    REAL ::  cross_ts_uymax(20) = &
1607                             (/ 999.999, 999.999, 999.999, 999.999, 999.999,   &
1608                                999.999, 999.999, 999.999, 999.999, 999.999,   &
1609                                999.999, 999.999, 999.999, 999.999, 999.999,   &
1610                                999.999, 999.999, 999.999, 999.999, 999.999 /),&
1611             cross_ts_uymax_computed(20) = 999.999, &
1612             cross_ts_uymin(20) = &
1613                             (/ 999.999, 999.999, 999.999,  -5.000, 999.999,   &
1614                                999.999,   0.000, 999.999, 999.999, 999.999,   &
1615                                999.999, 999.999, 999.999, 999.999, 999.999,   &
1616                                999.999, 999.999, 999.999, 999.999, 999.999 /),&
1617             cross_ts_uymin_computed(20) = 999.999
1618
1619    SAVE
1620
1621 END MODULE profil_parameter
1622
1623
1624
1625
1626 MODULE spectrum
1627
1628!------------------------------------------------------------------------------!
1629! Description:
1630! ------------
1631! Definition of quantities used for computing spectra
1632!------------------------------------------------------------------------------!
1633
1634    CHARACTER (LEN=6),  DIMENSION(1:5) ::  header_char = (/ 'PS(u) ', 'PS(v) ',&
1635                                           'PS(w) ', 'PS(pt)', 'PS(q) ' /)
1636    CHARACTER (LEN=2),  DIMENSION(10)  ::  spectra_direction = 'x'
1637    CHARACTER (LEN=10), DIMENSION(10)  ::  data_output_sp  = ' '
1638    CHARACTER (LEN=25), DIMENSION(1:5) ::  utext_char =                    &
1639                                           (/ '-power spectrum of u     ', &
1640                                              '-power spectrum of v     ', &
1641                                              '-power spectrum of w     ', &
1642                                              '-power spectrum of ^1185 ', &
1643                                              '-power spectrum of q     ' /)
1644    CHARACTER (LEN=39), DIMENSION(1:5) ::  ytext_char =                        &
1645                                 (/ 'k ^2236 ^2566^2569<u(k) in m>2s>->2    ', &
1646                                    'k ^2236 ^2566^2569<v(k) in m>2s>->2    ', &
1647                                    'k ^2236 ^2566^2569<w(k) in m>2s>->2    ', &
1648                                    'k ^2236 ^2566^2569<^1185(k) in m>2s>->2', &
1649                                    'k ^2236 ^2566^2569<q(k) in m>2s>->2    ' /)
1650
1651    INTEGER ::  klist_x = 0, klist_y = 0, n_sp_x = 0, n_sp_y = 0
1652
1653    INTEGER ::  comp_spectra_level(100) = 999999,                   &
1654                lstyles(100) = (/ 0, 7, 3, 10, 1, 4, 9, 2, 6, 8,    &
1655                                  0, 7, 3, 10, 1, 4, 9, 2, 6, 8,    &
1656                                  0, 7, 3, 10, 1, 4, 9, 2, 6, 8,    &
1657                                  0, 7, 3, 10, 1, 4, 9, 2, 6, 8,    &
1658                                  0, 7, 3, 10, 1, 4, 9, 2, 6, 8,    &
1659                                  0, 7, 3, 10, 1, 4, 9, 2, 6, 8,    &
1660                                  0, 7, 3, 10, 1, 4, 9, 2, 6, 8,    &
1661                                  0, 7, 3, 10, 1, 4, 9, 2, 6, 8,    &
1662                                  0, 7, 3, 10, 1, 4, 9, 2, 6, 8,    &
1663                                  0, 7, 3, 10, 1, 4, 9, 2, 6, 8 /), &
1664                plot_spectra_level(100) = 999999
1665
1666    REAL    ::  time_to_start_sp = 0.0
1667
1668    SAVE
1669
1670 END MODULE spectrum
1671
1672
1673
1674
1675 MODULE statistics
1676
1677!------------------------------------------------------------------------------!
1678! Description:
1679! ------------
1680! Definition of statistical quantities, e.g. global sums
1681!------------------------------------------------------------------------------!
1682
1683    CHARACTER (LEN=40) ::  region(0:9)
1684    INTEGER ::  pr_palm = 90, statistic_regions = 0
1685    INTEGER ::  u_max_ijk(3) = -1, v_max_ijk(3) = -1, w_max_ijk(3) = -1
1686    LOGICAL ::  flow_statistics_called = .FALSE.
1687    REAL ::     u_max, v_max, w_max
1688    REAL, DIMENSION(:), ALLOCATABLE       ::  sums_divnew_l, sums_divold_l,   &
1689                                              weight_substep, weight_pres
1690    REAL, DIMENSION(:,:), ALLOCATABLE     ::  sums, sums_wsts_bc_l, ts_value, &
1691                                              sums_wsus_ws_l, sums_wsvs_ws_l, &
1692                                              sums_us2_ws_l, sums_vs2_ws_l,   &
1693                                              sums_ws2_ws_l,                  &
1694                                              sums_wsnrs_ws_l,                &
1695                                              sums_wspts_ws_l,                &
1696                                              sums_wssas_ws_l,                &
1697                                              sums_wsqs_ws_l,                 &
1698                                              sums_wsqrs_ws_l
1699                                             
1700    REAL, DIMENSION(:,:,:), ALLOCATABLE   ::  hom_sum, rmask, spectrum_x, &
1701                                              spectrum_y, sums_l, sums_l_l, &
1702                                              sums_up_fraction_l
1703    REAL, DIMENSION(:,:,:,:), ALLOCATABLE ::  hom
1704
1705    SAVE
1706
1707 END MODULE statistics
1708
1709
1710
1711
1712 MODULE transpose_indices
1713
1714!------------------------------------------------------------------------------!
1715! Description:
1716! ------------
1717! Definition of indices for transposed arrays
1718!------------------------------------------------------------------------------!
1719
1720    INTEGER ::  nxl_y, nxl_yd, nxl_z, nxr_y, nxr_yd, nxr_z, nyn_x, nyn_z,      &
1721                nys_x, nys_z, nzb_x, nzb_y, nzb_yd, nzt_x, nzt_y, nzt_yd
1722               
1723
1724    SAVE
1725
1726 END MODULE transpose_indices
Note: See TracBrowser for help on using the repository browser.