MODULE advection !------------------------------------------------------------------------------! ! Current revisions: ! ----------------- ! ! ! Former revisions: ! ----------------- ! $Id: modules.f90 482 2010-02-05 06:37:03Z raasch $ ! ! 449 2010-02-02 11:23:59Z raasch ! -var_ts: replaced by dots_max, ! initial data assignments to some dvrp arrays changed due to error messages ! from gfortran compiler ! +large_scale_subsidence, ws_vertical_gradient, ws_vertical_gradient_level, ! ws_vertical_gradient_level_ind, w_subs ! ! 410 2009-12-04 17:05:40Z letzel ! masked data output: + dt_domask, mask_01~20_x|y|z, mask_01~20_x|y|z_loop, ! mask_scale|_x|y|z, masks, netcdf_format_mask[_av], skip_time_domask ! ! 388 2009-09-23 09:40:33Z raasch ! +prho, prho_1 ! +bc_lr_cyc, bc_ns_cyc ! +output_for_t0 ! translation error of actual -> current revisions fixed ! +q* in dots_label, dots_unit. increased dots_num respectively ! typographical error in dots_unit fixed ! +clip_dvrp_*, cluster_size, color_interval, dvrpsize_interval, dvrp_overlap, ! dvrp_total_overlap, groundplate_color, local_dvrserver_running, n*_dvrp, ! interval_*_dvrp_prt, isosurface_color, particle_color, particle_dvrpsize, ! topography color in dvrp_variables, ! vertical_particle_advection is a 1d-array, ! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left, ! canyon_wall_south, conserve_volume_flow_mode, coupling_start_time, ! dp_external, dp_level_b, dp_level_ind_b, dp_smooth, dp_smooth_factor, dpdxy, ! run_coupled, time_since_reference_point, u_bulk, v_bulk in control_parameters, ! default value of grid_matching changed to strict ! +shf_av, qsws_av ! ! 217 2008-12-09 18:00:48Z letzel ! +topography_grid_convention ! some dvrp-variables changed to single precision, variables for dvrp-mode ! pathlines added, +target_id, abort_mode, message_string ! ! 197 2008-09-16 15:29:03Z raasch ! allow 100 spectra levels instead of 10 for consistency with ! define_netcdf_header, +canopy_heat_flux, cthf, lai, ! +leaf_surface_concentration, scalar_exchange_coefficient, sec, sls ! +hor_index_bounds, hor_index_bounds_previous_run, id_inflow, id_recycling, ! inflow_damping_*, mean_inflow_profiles, numprocs_previous_run, nx_on_file, ! ny_on_file, offset_ocean_*, recycling_plane, recycling_width, turbulent_inflow ! -myid_char_14 ! ! 138 2007-11-28 10:03:58Z letzel ! +drag_coefficient, pch_index, lad_surface, lad_vertical_gradient, ! lad_vertical_gradient_level, plant_canopy, lad, lad_s, lad_u, lad_v, ! lad_w, cdc, lad_vertical_gradient_level_ind, canopy_mode ! +dt_sort_particles, ngp_2dh_s_inner, time_sort_particles, flags, ! wall_flags_1..10, wall_humidityflux(0:4), wall_qflux(0:4), ! wall_salinityflux(0:4), wall_scalarflux(0:4) ! ! 108 2007-08-24 15:10:38Z letzel ! +comm_inter, constant_top_momentumflux, coupling_char, coupling_mode, ! coupling_mode_remote, c_u, c_v, c_w, dt_coupling, e_init, humidity_remote, ! ngp_xy, nxlu, nysv, port_name, qswst_remote, terminate_coupled, ! terminate_coupled_remote, time_coupling, top_momentumflux_u|v, type_xy, ! uswst*, vswst* ! ! 97 2007-06-21 08:23:15Z raasch ! +atmos_ocean_sign, ocean, r, + salinity variables ! defaults of .._vertical_gradient_levels changed from -1.0 to -9999999.9 ! hydro_press renamed hyp, use_pt_reference renamed use_reference ! ! 89 2007-05-25 12:08:31Z raasch ! +data_output_pr_user, max_pr_user, size of data_output_pr, dopr_index, ! dopr_initial_index and dopr_unit enlarged, ! var_hom and var_sum renamed pr_palm ! ! 82 2007-04-16 15:40:52Z raasch ! +return_addres, return_username ! Cpp-directive lcmuk renamed lc ! ! 75 2007-03-22 09:54:05Z raasch ! +arrays precipitation_amount, precipitation_rate, precipitation_rate_av, ! rif_wall, z0_av, +arrays u_m_l, u_m_r, etc. for radiation boundary conditions, ! +loop_optimization, netcdf_64bit_3d, zu_s_inner, zw_w_inner, id_var_zusi_*, ! id_var_zwwi_*, ts_value, u_nzb_p1_for_vfc, v_nzb_p1_for_vfc, pt_reference, ! use_pt_reference, precipitation_amount_interval, revision ! +age_m in particle_type, moisture renamed humidity, ! -data_output_ts, dots_n, uvmean_outflow, uxrp, vynp, ! arrays dots_label and dots_unit now dimensioned with dots_max, ! setting of palm version moved to main program ! ! 37 2007-03-01 08:33:54Z raasch ! +constant_top_heatflux, top_heatflux, use_top_fluxes, +arrays for top fluxes, ! +nzt_diff, default of bc_pt_t renamed "initial_gradient" ! Bugfix: p is not a pointer ! ! RCS Log replace by Id keyword, revision history cleaned up ! ! Revision 1.95 2007/02/11 13:18:30 raasch ! version 3.1b (last under RCS control) ! ! Revision 1.1 1997/07/24 11:21:26 raasch ! Initial revision ! ! ! Description: ! ------------ ! Definition of variables for special advection schemes !------------------------------------------------------------------------------! REAL :: spl_gamma_x, spl_gamma_y REAL, DIMENSION(:), ALLOCATABLE :: aex, bex, dex, eex, spl_z_x, spl_z_y REAL, DIMENSION(:,:), ALLOCATABLE :: spl_tri_x, spl_tri_y, spl_tri_zu, & spl_tri_zw SAVE END MODULE advection MODULE array_kind !------------------------------------------------------------------------------! ! Description: ! ------------ ! Definition of type parameters (used for the definition of single or double ! precision variables) !------------------------------------------------------------------------------! INTEGER, PARAMETER :: dpk = SELECTED_REAL_KIND( 12 ), & spk = SELECTED_REAL_KIND( 6 ) SAVE END MODULE array_kind MODULE arrays_3d !------------------------------------------------------------------------------! ! Description: ! ------------ ! Definition of all arrays defined on the computational grid !------------------------------------------------------------------------------! USE array_kind REAL, DIMENSION(:), ALLOCATABLE :: & ddzu, dd2zu, dzu, ddzw, dzw, hyp, inflow_damping_factor, km_damp_x, & km_damp_y, lad, l_grid, pt_init, q_init, rdf, sa_init, ug, u_init, & u_nzb_p1_for_vfc, vg, v_init, v_nzb_p1_for_vfc, w_subs, zu, zw REAL, DIMENSION(:,:), ALLOCATABLE :: & c_u, c_v, c_w, dzu_mg, dzw_mg, f1_mg, f2_mg, f3_mg, & mean_inflow_profiles, pt_slope_ref, qs, qswst_remote, ts, us, z0 REAL, DIMENSION(:,:), ALLOCATABLE, TARGET :: & qsws_1, qsws_2, qswst_1, qswst_2, rif_1, rif_2, saswsb_1, saswst_1, & shf_1, shf_2, tswst_1, tswst_2, usws_1, usws_2, uswst_1, uswst_2, & vsws_1, vsws_2, vswst_1, vswst_2 REAL, DIMENSION(:,:), POINTER :: & qsws, qsws_m, qswst, qswst_m, rif, rif_m, saswsb, saswst, shf, & shf_m, tswst, tswst_m, usws, uswst, usws_m, uswst_m, vsws, vswst, & vsws_m, vswst_m REAL, DIMENSION(:,:,:), ALLOCATABLE :: & canopy_heat_flux, cdc, d, diss, lad_s, lad_u, lad_v, lad_w, lai, & l_wall, sec, sls, tend, u_m_l, u_m_n, u_m_r, u_m_s, v_m_l, v_m_n, & v_m_r, v_m_s, w_m_l, w_m_n, w_m_r, w_m_s REAL, DIMENSION(:,:,:), ALLOCATABLE, TARGET :: & ql_v, ql_vp REAL, DIMENSION(:,:,:), ALLOCATABLE, TARGET :: & e_1, e_2, e_3, kh_1, kh_2, km_1, km_2, p, prho_1, pt_1, pt_2, pt_3, & q_1, q_2, q_3, ql_1, ql_2, rho_1, sa_1, sa_2, sa_3, u_1, u_2, u_3, & v_1, v_2, v_3, vpt_1, vpt_2, w_1, w_2, w_3 REAL, DIMENSION(:,:,:), POINTER :: & e, e_m, e_p, kh, kh_m, km, km_m, prho, pt, pt_m, pt_p, q, q_m, q_p, & ql, ql_c, rho, sa, sa_p, te_m, tpt_m, tq_m, tsa_m, tu_m, tv_m, tw_m, & u, u_m, u_p, v, v_m, v_p, vpt, vpt_m, w, w_m, w_p REAL, DIMENSION(:,:,:,:), ALLOCATABLE :: rif_wall SAVE END MODULE arrays_3d MODULE averaging !------------------------------------------------------------------------------! ! Description: ! ------------ ! Definition of variables needed for time-averaging of 2d/3d data !------------------------------------------------------------------------------! REAL, DIMENSION(:,:), ALLOCATABLE :: lwp_av, precipitation_rate_av, & qsws_av, shf_av,ts_av, us_av, z0_av REAL, DIMENSION(:,:,:), ALLOCATABLE, TARGET :: & e_av, p_av, pc_av, pr_av, pt_av, q_av, ql_av, ql_c_av, ql_v_av, & ql_vp_av, qv_av, rho_av, s_av, sa_av, u_av, v_av, vpt_av, w_av END MODULE averaging MODULE cloud_parameters !------------------------------------------------------------------------------! ! Description: ! ------------ ! Definition of variables and constants for cloud physics !------------------------------------------------------------------------------! REAL :: b_cond, cp = 1005.0, diff_coeff_l = 0.23E-4, & effective_coll_efficiency, l_d_cp, l_d_r, l_d_rv, l_v = 2.5E+06, & mass_of_solute, molecular_weight_of_solute, & prec_time_const = 0.001, ql_crit = 0.0005, rho_l = 1.0E3, & r_d = 287.0, r_v = 461.51, thermal_conductivity_l = 2.43E-2 REAL, DIMENSION(:), ALLOCATABLE :: pt_d_t, t_d_pt REAL, DIMENSION(:,:), ALLOCATABLE :: precipitation_amount, & precipitation_rate SAVE END MODULE cloud_parameters MODULE constants !------------------------------------------------------------------------------! ! Description: ! ------------ ! Definition of general constants !------------------------------------------------------------------------------! REAL :: pi = 3.141592654 SAVE END MODULE constants MODULE control_parameters !------------------------------------------------------------------------------! ! Description: ! ------------ ! Definition of parameters for program control !------------------------------------------------------------------------------! TYPE plot_precision CHARACTER (LEN=6) :: variable INTEGER :: precision END TYPE plot_precision TYPE(plot_precision), DIMENSION(100) :: plot_3d_precision = & (/ plot_precision( 'u', 2 ), plot_precision( 'v', 2 ), & plot_precision( 'w', 2 ), plot_precision( 'p', 5 ), & plot_precision( 'pt', 2 ), & ( plot_precision( ' ', 1 ), i9 = 1,95 ) /) TYPE file_status LOGICAL :: opened, opened_before END TYPE file_status TYPE(file_status), DIMENSION(200) :: openfile = file_status(.FALSE.,.FALSE.) INTEGER, PARAMETER :: mask_xyz_dimension = 100, max_masks = 20 CHARACTER (LEN=1) :: cycle_mg = 'w', timestep_reason = ' ' CHARACTER (LEN=2) :: coupling_char = '' CHARACTER (LEN=5) :: write_binary = 'false' CHARACTER (LEN=6) :: grid_matching = 'strict' CHARACTER (LEN=8) :: run_date, run_time CHARACTER (LEN=9) :: simulated_time_chr CHARACTER (LEN=11) :: topography_grid_convention = ' ' CHARACTER (LEN=12) :: version = ' ', revision = ' ' CHARACTER (LEN=16) :: conserve_volume_flow_mode = 'default', & loop_optimization = 'default', & momentum_advec = 'pw-scheme', & psolver = 'poisfft', & scalar_advec = 'pw-scheme' CHARACTER (LEN=20) :: bc_e_b = 'neumann', bc_lr = 'cyclic', & bc_ns = 'cyclic', bc_p_b = 'neumann', & bc_p_t = 'dirichlet', bc_pt_b = 'dirichlet', & bc_pt_t = 'initial_gradient', & bc_q_b = 'dirichlet', bc_q_t = 'neumann', & bc_s_b = 'dirichlet', bc_s_t = 'neumann', & bc_sa_t = 'neumann', & bc_uv_b = 'dirichlet', bc_uv_t = 'dirichlet', & canopy_mode = 'block', & coupling_mode = 'uncoupled', & coupling_mode_remote = 'uncoupled', & dissipation_1d = 'as_in_3d_model', & fft_method = 'system-specific', & mixing_length_1d = 'as_in_3d_model', & random_generator = 'numerical-recipes', & return_addres, return_username, & timestep_scheme = 'runge-kutta-3' CHARACTER (LEN=40) :: avs_data_file, topography = 'flat' CHARACTER (LEN=64) :: host = ' ' CHARACTER (LEN=80) :: log_message, run_identifier CHARACTER (LEN=100) :: initializing_actions = ' ', run_description_header CHARACTER (LEN=1000) :: message_string = ' ' CHARACTER (LEN=7), DIMENSION(100) :: do3d_comp_prec = ' ' CHARACTER (LEN=10), DIMENSION(10) :: data_output_format = ' ' CHARACTER (LEN=11), DIMENSION(100) :: data_output = ' ', & data_output_user = ' ', doav = ' ' CHARACTER (LEN=10), DIMENSION(100) :: & data_output_mask_01 = ' ', data_output_mask_02 = ' ', & data_output_mask_03 = ' ', data_output_mask_04 = ' ', & data_output_mask_05 = ' ', data_output_mask_06 = ' ', & data_output_mask_07 = ' ', data_output_mask_08 = ' ', & data_output_mask_09 = ' ', data_output_mask_10 = ' ', & data_output_mask_11 = ' ', data_output_mask_12 = ' ', & data_output_mask_13 = ' ', data_output_mask_14 = ' ', & data_output_mask_15 = ' ', data_output_mask_16 = ' ', & data_output_mask_17 = ' ', data_output_mask_18 = ' ', & data_output_mask_19 = ' ', data_output_mask_20 = ' ', & data_output_mask_user_01 = ' ', data_output_mask_user_02 = ' ', & data_output_mask_user_03 = ' ', data_output_mask_user_04 = ' ', & data_output_mask_user_05 = ' ', data_output_mask_user_06 = ' ', & data_output_mask_user_07 = ' ', data_output_mask_user_08 = ' ', & data_output_mask_user_09 = ' ', data_output_mask_user_10 = ' ', & data_output_mask_user_11 = ' ', data_output_mask_user_12 = ' ', & data_output_mask_user_13 = ' ', data_output_mask_user_14 = ' ', & data_output_mask_user_15 = ' ', data_output_mask_user_16 = ' ', & data_output_mask_user_17 = ' ', data_output_mask_user_18 = ' ', & data_output_mask_user_19 = ' ', data_output_mask_user_20 = ' ' CHARACTER (LEN=10), DIMENSION(300) :: data_output_pr = ' ' CHARACTER (LEN=10), DIMENSION(200) :: data_output_pr_user = ' ' CHARACTER (LEN=20), DIMENSION(50) :: netcdf_precision = ' ' CHARACTER (LEN=10), DIMENSION(max_masks,0:1,100) :: domask = ' ' CHARACTER (LEN=10), DIMENSION(0:1,100) :: do2d = ' ', do3d = ' ' INTEGER :: abort_mode = 1, average_count_pr = 0, average_count_sp = 0, & average_count_3d = 0, current_timestep_number = 0, & dist_range = 0, disturbance_level_ind_b, & disturbance_level_ind_t, doav_n = 0, dopr_n = 0, & dopr_time_count = 0, dopts_time_count = 0, & dosp_time_count = 0, dots_time_count = 0, & do2d_xy_n = 0, do2d_xz_n = 0, do2d_yz_n = 0, do3d_avs_n = 0, & dp_level_ind_b = 0, & dvrp_filecount = 0, dz_stretch_level_index, gamma_mg, & grid_level, ibc_e_b, ibc_p_b, ibc_p_t, ibc_pt_b, ibc_pt_t, & ibc_q_b, ibc_q_t, ibc_sa_t, ibc_uv_b, ibc_uv_t, & inflow_disturbance_begin = -1, inflow_disturbance_end = -1, & intermediate_timestep_count, intermediate_timestep_count_max, & iran = -1234567, last_dt_change = 0, masks = 0, & maximum_grid_level, & max_pr_user = 0, mgcycles = 0, mg_cycles = -1, & mg_switch_to_pe0_level = 0, mid, ngsrb = 2, nsor = 20, & nsor_ini = 100, n_sor, normalizing_region = 0, & nz_do1d, nz_do3d = -9999, outflow_damping_width = -1, & pch_index = 0, prt_time_count = 0, recycling_plane, runnr = 0, & skip_do_avs = 0, terminate_coupled = 0, & terminate_coupled_remote = 0, timestep_count = 0 INTEGER :: dist_nxl(0:1), dist_nxr(0:1), dist_nyn(0:1), dist_nys(0:1), & do2d_no(0:1) = 0, do2d_xy_time_count(0:1), & do2d_xz_time_count(0:1), do2d_yz_time_count(0:1), & do3d_no(0:1) = 0, do3d_time_count(0:1), & domask_no(max_masks,0:1) = 0, domask_time_count(max_masks,0:1),& lad_vertical_gradient_level_ind(10) = -9999, & mask_size(max_masks,3) = -1, mask_size_l(max_masks,3) = -1, & mask_start_l(max_masks,3) = -1, & nc_format_mask(1:max_masks,0:1), & netcdf_format_mask(1:max_masks) = 1, & netcdf_format_mask_av(1:max_masks) = 1, & pt_vertical_gradient_level_ind(10) = -9999, & q_vertical_gradient_level_ind(10) = -9999, & sa_vertical_gradient_level_ind(10) = -9999, & section(100,3), section_xy(100) = -9999, & section_xz(100) = -9999, section_yz(100) = -9999, & ug_vertical_gradient_level_ind(10) = -9999, & vg_vertical_gradient_level_ind(10) = -9999, & ws_vertical_gradient_level_ind(10) = -9999 INTEGER, DIMENSION(:), ALLOCATABLE :: grid_level_count INTEGER, DIMENSION(:,:), ALLOCATABLE :: mask_i, mask_j, mask_k INTEGER, DIMENSION(:,:), ALLOCATABLE :: & mask_i_global, mask_j_global, mask_k_global LOGICAL :: adjust_mixing_length = .FALSE., avs_output = .FALSE., & bc_lr_cyc =.TRUE., bc_ns_cyc = .TRUE., & call_psolver_at_all_substeps = .TRUE., & cloud_droplets = .FALSE., cloud_physics = .FALSE., & conserve_volume_flow = .FALSE., constant_diffusion = .FALSE., & constant_heatflux = .TRUE., constant_top_heatflux = .TRUE., & constant_top_momentumflux = .FALSE., & constant_top_salinityflux = .TRUE., & constant_waterflux = .TRUE., create_disturbances = .TRUE., & cut_spline_overshoot = .TRUE., & data_output_2d_on_each_pe = .TRUE., do2d_at_begin = .FALSE., & do3d_at_begin = .FALSE., do3d_compress = .FALSE., & do_sum = .FALSE., dp_external = .FALSE., dp_smooth = .FALSE., & dt_changed = .FALSE., dt_fixed = .FALSE., & disturbance_created = .FALSE., & first_call_advec_particles = .TRUE., & force_print_header = .FALSE., format_parallel_io = .FALSE., & galilei_transformation = .FALSE.,& humidity = .FALSE., humidity_remote = .FALSE., & inflow_l = .FALSE., inflow_n = .FALSE., & inflow_r = .FALSE., inflow_s = .FALSE., & iso2d_output = .FALSE., large_scale_subsidence = .FALSE., & mg_switch_to_pe0 = .FALSE., & netcdf_output = .FALSE., netcdf_64bit = .FALSE., & netcdf_64bit_3d = .TRUE., ocean = .FALSE., & outflow_l = .FALSE., outflow_n = .FALSE., outflow_r = .FALSE., & outflow_s = .FALSE., passive_scalar = .FALSE., & plant_canopy = .FALSE., & prandtl_layer = .TRUE., precipitation = .FALSE., & profil_output = .FALSE., radiation = .FALSE., & random_heatflux = .FALSE., run_control_header = .FALSE., & run_coupled = .TRUE., sloping_surface = .FALSE., & stop_dt = .FALSE., terminate_run = .FALSE., & turbulent_inflow = .FALSE., & use_prior_plot1d_parameters = .FALSE., use_reference = .FALSE.,& use_surface_fluxes = .FALSE., use_top_fluxes = .FALSE., & use_ug_for_galilei_tr = .TRUE., use_upstream_for_tke = .FALSE.,& wall_adjustment = .TRUE. LOGICAL :: data_output_xy(0:1) = .FALSE., data_output_xz(0:1) = .FALSE., & data_output_yz(0:1) = .FALSE. REAL :: advected_distance_x = 0.0, advected_distance_y = 0.0, & alpha_surface = 0.0, asselin_filter_factor = 0.1, & atmos_ocean_sign = 1.0, & averaging_interval = 0.0, averaging_interval_pr = 9999999.9, & averaging_interval_sp = 9999999.9, bc_pt_t_val, bc_q_t_val, & bottom_salinityflux = 0.0, & building_height = 50.0, building_length_x = 50.0, & building_length_y = 50.0, building_wall_left = 9999999.9, & building_wall_south = 9999999.9, canyon_height = 50.0, & canyon_width_x = 9999999.9, canyon_width_y = 9999999.9, & canyon_wall_left = 9999999.9, canyon_wall_south = 9999999.9, & cthf = 0.0, cfl_factor = -1.0, cos_alpha_surface, & coupling_start_time, disturbance_amplitude = 0.25, & disturbance_energy_limit = 0.01, & disturbance_level_b = -9999999.9, & disturbance_level_t = -9999999.9, & dp_level_b = 0.0, drag_coefficient = 0.0, & dt = -1.0, dt_averaging_input = 0.0, & dt_averaging_input_pr = 9999999.9, dt_coupling = 9999999.9, & dt_data_output = 9999999.9, & dt_data_output_av = 9999999.9, dt_disturb = 9999999.9, & dt_dopr = 9999999.9, dt_dopr_listing = 9999999.9, & dt_dopts = 9999999.9, dt_dosp = 9999999.9, dt_dots = 9999999.9, & dt_do2d_xy = 9999999.9, dt_do2d_xz = 9999999.9, & dt_do2d_yz = 9999999.9, dt_do3d = 9999999.9, dt_dvrp = 9999999.9, & dt_max = 20.0, dt_prel = 9999999.9, dt_restart = 9999999.9, & dt_run_control = 60.0, dt_3d = -1.0, dz = -1.0, & dz_max = 9999999.9, dz_stretch_factor = 1.08, & dz_stretch_level = 100000.0, e_init = 0.0, e_min = 0.0, & end_time = 0.0, & f = 0.0, fs = 0.0, g = 9.81, inflow_damping_height = 9999999.9, & inflow_damping_width = 9999999.9, kappa = 0.4, km_constant = -1.0,& km_damp_max = -1.0, lad_surface = 0.0, & leaf_surface_concentration = 0.0, long_filter_factor = 0.0, & mask_scale_x = 1.0, mask_scale_y = 1.0, mask_scale_z = 1.0, & maximum_cpu_time_allowed = 0.0, & molecular_viscosity = 1.461E-5, & old_dt = 1.0E-10, omega = 7.29212E-5, omega_sor = 1.8, & overshoot_limit_e = 0.0, overshoot_limit_pt = 0.0, & overshoot_limit_u = 0.0, overshoot_limit_v = 0.0, & overshoot_limit_w = 0.0, particle_maximum_age = 9999999.9, & phi = 55.0, prandtl_number = 1.0, & precipitation_amount_interval = 9999999.9, prho_reference, & pt_reference = 9999999.9, pt_slope_offset = 0.0, & pt_surface = 300.0, pt_surface_initial_change = 0.0, & q_surface = 0.0, q_surface_initial_change = 0.0, & rayleigh_damping_factor = -1.0, rayleigh_damping_height = -1.0, & recycling_width = 9999999.9, residual_limit = 1.0E-4, & restart_time = 9999999.9, rho_reference, rho_surface, & rif_max = 1.0, rif_min = -5.0, roughness_length = 0.1, & sa_surface = 35.0, scalar_exchange_coefficient = 0.0, & simulated_time = 0.0, simulated_time_at_begin, sin_alpha_surface, & skip_time_data_output = 0.0, skip_time_data_output_av = 9999999.9,& skip_time_dopr = 9999999.9, skip_time_dosp = 9999999.9, & skip_time_do2d_xy = 9999999.9, skip_time_do2d_xz = 9999999.9, & skip_time_do2d_yz = 9999999.9, skip_time_do3d = 9999999.9, & surface_heatflux = 9999999.9, surface_pressure = 1013.25, & surface_scalarflux = 0.0, surface_waterflux = 0.0, & s_surface = 0.0, s_surface_initial_change = 0.0, & termination_time_needed = -1.0, time_coupling = 0.0, & time_disturb = 0.0, time_dopr = 0.0, time_dopr_av = 0.0, & time_dopr_listing = 0.0, time_dopts = 0.0, time_dosp = 0.0, & time_dosp_av = 0.0, time_dots = 0.0, time_do2d_xy = 0.0, & time_do2d_xz = 0.0, time_do2d_yz = 0.0, time_do3d = 0.0, & time_do_av = 0.0, time_do_sla = 0.0, time_dvrp = 0.0, & time_prel = 0.0, time_restart = 9999999.9, time_run_control = 0.0,& time_since_reference_point, top_heatflux = 9999999.9, & top_momentumflux_u = 9999999.9, & top_momentumflux_v = 9999999.9, top_salinityflux = 9999999.9, & ug_surface = 0.0, u_bulk = 0.0, u_gtrans = 0.0, & ups_limit_e = 0.0, ups_limit_pt = 0.0, ups_limit_u = 0.0, & ups_limit_v = 0.0, ups_limit_w = 0.0, vg_surface = 0.0, & v_bulk = 0.0, v_gtrans = 0.0, wall_adjustment_factor = 1.8, & z_max_do1d = -1.0, z_max_do1d_normalized = -1.0, z_max_do2d = -1.0 REAL :: do2d_xy_last_time(0:1) = -1.0, do2d_xz_last_time(0:1) = -1.0, & do2d_yz_last_time(0:1) = -1.0, dpdxy(1:2) = 0.0, & dt_domask(max_masks) = 9999999.9, lad_vertical_gradient(10) = 0.0,& lad_vertical_gradient_level(10) = -9999999.9, & mask_scale(3), & pt_vertical_gradient(10) = 0.0, & pt_vertical_gradient_level(10) = -9999999.9, & q_vertical_gradient(10) = 0.0, & q_vertical_gradient_level(10) = -1.0, & s_vertical_gradient(10) = 0.0, & s_vertical_gradient_level(10) = -1.0, & sa_vertical_gradient(10) = 0.0, & sa_vertical_gradient_level(10) = -9999999.9, & skip_time_domask(max_masks) = 9999999.9, threshold(20) = 0.0, & time_domask(max_masks) = 0.0, & tsc(10) = (/ 0.0, 1.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0 /), & ug_vertical_gradient(10) = 0.0, & ug_vertical_gradient_level(10) = -9999999.9, & vg_vertical_gradient(10) = 0.0, & vg_vertical_gradient_level(10) = -9999999.9, & volume_flow(1:2) = 0.0, volume_flow_area(1:2) = 0.0, & volume_flow_initial(1:2) = 0.0, wall_heatflux(0:4) = 0.0, & wall_humidityflux(0:4) = 0.0, wall_qflux(0:4) = 0.0, & wall_salinityflux(0:4) = 0.0, wall_scalarflux(0:4) = 0.0, & ws_vertical_gradient(10) = 0.0, & ws_vertical_gradient_level(10) = -9999999.9 REAL, DIMENSION(:), ALLOCATABLE :: dp_smooth_factor REAL, DIMENSION(mask_xyz_dimension) :: & mask_01_x = -1.0, mask_02_x = -1.0, mask_03_x = -1.0, mask_04_x = -1.0, & mask_05_x = -1.0, mask_06_x = -1.0, mask_07_x = -1.0, mask_08_x = -1.0, & mask_09_x = -1.0, mask_10_x = -1.0, mask_11_x = -1.0, mask_12_x = -1.0, & mask_13_x = -1.0, mask_14_x = -1.0, mask_15_x = -1.0, mask_16_x = -1.0, & mask_17_x = -1.0, mask_18_x = -1.0, mask_19_x = -1.0, mask_20_x = -1.0, & mask_01_y = -1.0, mask_02_y = -1.0, mask_03_y = -1.0, mask_04_y = -1.0, & mask_05_y = -1.0, mask_06_y = -1.0, mask_07_y = -1.0, mask_08_y = -1.0, & mask_09_y = -1.0, mask_10_y = -1.0, mask_11_y = -1.0, mask_12_y = -1.0, & mask_13_y = -1.0, mask_14_y = -1.0, mask_15_y = -1.0, mask_16_y = -1.0, & mask_17_y = -1.0, mask_18_y = -1.0, mask_19_y = -1.0, mask_20_y = -1.0, & mask_01_z = -1.0, mask_02_z = -1.0, mask_03_z = -1.0, mask_04_z = -1.0, & mask_05_z = -1.0, mask_06_z = -1.0, mask_07_z = -1.0, mask_08_z = -1.0, & mask_09_z = -1.0, mask_10_z = -1.0, mask_11_z = -1.0, mask_12_z = -1.0, & mask_13_z = -1.0, mask_14_z = -1.0, mask_15_z = -1.0, mask_16_z = -1.0, & mask_17_z = -1.0, mask_18_z = -1.0, mask_19_z = -1.0, mask_20_z = -1.0 REAL, DIMENSION(3) :: & mask_01_x_loop = (/ -1.0, -1.0, 0.0 /), & mask_02_x_loop = (/ -1.0, -1.0, 0.0 /), & mask_03_x_loop = (/ -1.0, -1.0, 0.0 /), & mask_04_x_loop = (/ -1.0, -1.0, 0.0 /), & mask_05_x_loop = (/ -1.0, -1.0, 0.0 /), & mask_06_x_loop = (/ -1.0, -1.0, 0.0 /), & mask_07_x_loop = (/ -1.0, -1.0, 0.0 /), & mask_08_x_loop = (/ -1.0, -1.0, 0.0 /), & mask_09_x_loop = (/ -1.0, -1.0, 0.0 /), & mask_10_x_loop = (/ -1.0, -1.0, 0.0 /), & mask_11_x_loop = (/ -1.0, -1.0, 0.0 /), & mask_12_x_loop = (/ -1.0, -1.0, 0.0 /), & mask_13_x_loop = (/ -1.0, -1.0, 0.0 /), & mask_14_x_loop = (/ -1.0, -1.0, 0.0 /), & mask_15_x_loop = (/ -1.0, -1.0, 0.0 /), & mask_16_x_loop = (/ -1.0, -1.0, 0.0 /), & mask_17_x_loop = (/ -1.0, -1.0, 0.0 /), & mask_18_x_loop = (/ -1.0, -1.0, 0.0 /), & mask_19_x_loop = (/ -1.0, -1.0, 0.0 /), & mask_20_x_loop = (/ -1.0, -1.0, 0.0 /), & mask_01_y_loop = (/ -1.0, -1.0, 0.0 /), & mask_02_y_loop = (/ -1.0, -1.0, 0.0 /), & mask_03_y_loop = (/ -1.0, -1.0, 0.0 /), & mask_04_y_loop = (/ -1.0, -1.0, 0.0 /), & mask_05_y_loop = (/ -1.0, -1.0, 0.0 /), & mask_06_y_loop = (/ -1.0, -1.0, 0.0 /), & mask_07_y_loop = (/ -1.0, -1.0, 0.0 /), & mask_08_y_loop = (/ -1.0, -1.0, 0.0 /), & mask_09_y_loop = (/ -1.0, -1.0, 0.0 /), & mask_10_y_loop = (/ -1.0, -1.0, 0.0 /), & mask_11_y_loop = (/ -1.0, -1.0, 0.0 /), & mask_12_y_loop = (/ -1.0, -1.0, 0.0 /), & mask_13_y_loop = (/ -1.0, -1.0, 0.0 /), & mask_14_y_loop = (/ -1.0, -1.0, 0.0 /), & mask_15_y_loop = (/ -1.0, -1.0, 0.0 /), & mask_16_y_loop = (/ -1.0, -1.0, 0.0 /), & mask_17_y_loop = (/ -1.0, -1.0, 0.0 /), & mask_18_y_loop = (/ -1.0, -1.0, 0.0 /), & mask_19_y_loop = (/ -1.0, -1.0, 0.0 /), & mask_20_y_loop = (/ -1.0, -1.0, 0.0 /), & mask_01_z_loop = (/ -1.0, -1.0, 0.0 /), & mask_02_z_loop = (/ -1.0, -1.0, 0.0 /), & mask_03_z_loop = (/ -1.0, -1.0, 0.0 /), & mask_04_z_loop = (/ -1.0, -1.0, 0.0 /), & mask_05_z_loop = (/ -1.0, -1.0, 0.0 /), & mask_06_z_loop = (/ -1.0, -1.0, 0.0 /), & mask_07_z_loop = (/ -1.0, -1.0, 0.0 /), & mask_08_z_loop = (/ -1.0, -1.0, 0.0 /), & mask_09_z_loop = (/ -1.0, -1.0, 0.0 /), & mask_10_z_loop = (/ -1.0, -1.0, 0.0 /), & mask_11_z_loop = (/ -1.0, -1.0, 0.0 /), & mask_12_z_loop = (/ -1.0, -1.0, 0.0 /), & mask_13_z_loop = (/ -1.0, -1.0, 0.0 /), & mask_14_z_loop = (/ -1.0, -1.0, 0.0 /), & mask_15_z_loop = (/ -1.0, -1.0, 0.0 /), & mask_16_z_loop = (/ -1.0, -1.0, 0.0 /), & mask_17_z_loop = (/ -1.0, -1.0, 0.0 /), & mask_18_z_loop = (/ -1.0, -1.0, 0.0 /), & mask_19_z_loop = (/ -1.0, -1.0, 0.0 /), & mask_20_z_loop = (/ -1.0, -1.0, 0.0 /) ! !-- internal mask arrays ("mask,dimension,selection") REAL, DIMENSION(:,:,:), ALLOCATABLE :: mask, mask_loop SAVE END MODULE control_parameters MODULE cpulog !------------------------------------------------------------------------------! ! Description: ! ------------ ! Definition of variables for cpu-time measurements !------------------------------------------------------------------------------! REAL :: initial_wallclock_time TYPE logpoint REAL :: isum, ivect, mean, mtime, mtimevec, sum, vector INTEGER :: counts CHARACTER (LEN=20) :: place END TYPE logpoint TYPE(logpoint), DIMENSION(100) :: log_point = logpoint( 0.0, 0.0, 0.0, & 0.0, 0.0, 0.0, 0.0, 0, ' ' ), & log_point_s = logpoint( 0.0, 0.0, 0.0, & 0.0, 0.0, 0.0, 0.0, 0, ' ' ) SAVE END MODULE cpulog MODULE dvrp_variables !------------------------------------------------------------------------------! ! Description: ! ------------ ! Definition of variables used with dvrp-software !------------------------------------------------------------------------------! CHARACTER (LEN=10) :: dvrp_output = 'rtsp', particle_color = 'none', & particle_dvrpsize = 'none' CHARACTER (LEN=20), DIMENSION(10) :: mode_dvrp = & (/ ( ' ', i9 = 1,10 ) /) CHARACTER (LEN=80) :: dvrp_directory = 'default', & dvrp_file = 'default', & dvrp_host = 'origin.rvs.uni-hannover.de', & dvrp_password = '********', & dvrp_username = ' ' INTEGER :: cluster_size = 1, dvrp_colortable_entries = 4, & dvrp_colortable_entries_prt = 22, islice_dvrp, & nx_dvrp, nxl_dvrp, nxr_dvrp, ny_dvrp, nyn_dvrp, nys_dvrp, & nz_dvrp, pathlines_fadeintime = 5, pathlines_fadeouttime = 5, & pathlines_linecount = 1000, pathlines_maxhistory = 40, & pathlines_wavecount = 10, pathlines_wavetime = 50, & vc_gradient_normals = 0, vc_mode = 0, vc_size_x = 2, & vc_size_y = 2, vc_size_z = 2 INTEGER, DIMENSION(10) :: slicer_position_dvrp LOGICAL :: cyclic_dvrp = .FALSE., dvrp_overlap, dvrp_total_overlap, & local_dvrserver_running, lock_steering_update = .FALSE., & use_seperate_pe_for_dvrp_output = .FALSE. REAL :: clip_dvrp_l = 9999999.9, clip_dvrp_n = 9999999.9, & clip_dvrp_r = 9999999.9, clip_dvrp_s = 9999999.9, & superelevation = 1.0, superelevation_x = 1.0, & superelevation_y = 1.0, vc_alpha = 38.0 REAL, DIMENSION(2) :: color_interval = (/ 0.0, 1.0 /), & dvrpsize_interval = (/ 0.0, 1.0 /) REAL, DIMENSION(3) :: groundplate_color = (/ 0.0, 0.6, 0.0 /), & topography_color = (/ 0.8, 0.7, 0.6 /) #if defined( __decalpha ) REAL, DIMENSION(2,10) :: slicer_range_limits_dvrp = RESHAPE( (/ & -1.0, 1.0, -1.0, 1.0, -1.0, 1.0, -1.0, 1.0, & -1.0, 1.0, -1.0, 1.0, -1.0, 1.0, -1.0, 1.0, & -1.0, 1.0, -1.0, 1.0 /), (/ 2, 10 /) ) REAL, DIMENSION(3,10) :: isosurface_color = RESHAPE( (/ & 0.9, 0.9, 0.9, 0.8, 0.1, 0.1, 0.1, 0.1, 0.8, & 0.1, 0.8, 0.1, 0.6, 0.1, 0.1, 0.1, 0.1, 0.6, & 0.1, 0.6, 0.1, 0.4, 0.1, 0.1, 0.1, 0.1, 0.4, & 0.1, 0.4, 0.1 /), (/ 3, 10 /) ) REAL(4), DIMENSION(2,100) :: interval_values_dvrp, interval_h_dvrp = & RESHAPE( (/ 270.0, 225.0, 225.0, 180.0, & 70.0, 25.0, 25.0, -25.0, & ( 0.0, i9 = 1, 192 ) /), & (/ 2, 100 /) ), & interval_l_dvrp = 0.5, interval_s_dvrp = 1.0,& interval_a_dvrp = 0.0, & interval_values_dvrp_prt, & interval_h_dvrp_prt = RESHAPE( & (/ 270.0, 225.0, 225.0, 180.0, 70.0, 25.0, & 25.0, -25.0, ( 0.0, i9 = 1, 192 ) /), & (/ 2, 100 /) ), & interval_l_dvrp_prt = 0.5, & interval_s_dvrp_prt = 1.0, & interval_a_dvrp_prt = 0.0 #else REAL, DIMENSION(2,10) :: slicer_range_limits_dvrp REAL, DIMENSION(3,10) :: isosurface_color REAL(4), DIMENSION(2,100) :: interval_values_dvrp, & interval_values_dvrp_prt, interval_h_dvrp, & interval_h_dvrp_prt, interval_l_dvrp = 0.5, & interval_l_dvrp_prt = 0.5, interval_s_dvrp = 1.0, & interval_s_dvrp_prt = 1.0, interval_a_dvrp = 0.0, & interval_a_dvrp_prt = 0.0 DATA slicer_range_limits_dvrp / -1.0, 1.0, -1.0, 1.0, -1.0, 1.0, & -1.0, 1.0, -1.0, 1.0, -1.0, 1.0, & -1.0, 1.0, -1.0, 1.0, -1.0, 1.0, & -1.0, 1.0 / DATA isosurface_color / 0.9, 0.9, 0.9, 0.8, 0.1, 0.1, 0.1, 0.1, 0.8, & 0.1, 0.8, 0.1, 0.6, 0.1, 0.1, 0.1, 0.1, 0.6, & 0.1, 0.6, 0.1, 0.4, 0.1, 0.1, 0.1, 0.1, 0.4, & 0.1, 0.4, 0.1 / DATA interval_h_dvrp / 270.0, 225.0, 225.0, 180.0, 70.0, 25.0, & 25.0, -25.0, 192 * 0.0 / DATA interval_h_dvrp_prt / 270.0, 225.0, 225.0, 180.0, 70.0, 25.0, & 25.0, -25.0, 192 * 0.0 / #endif REAL(4), DIMENSION(:), ALLOCATABLE :: xcoor_dvrp, ycoor_dvrp, zcoor_dvrp TYPE steering CHARACTER (LEN=20) :: name REAL(4) :: min, max INTEGER :: imin, imax END TYPE steering TYPE(steering), DIMENSION(:), ALLOCATABLE :: steering_dvrp SAVE END MODULE dvrp_variables MODULE grid_variables !------------------------------------------------------------------------------! ! Description: ! ------------ ! Definition of grid spacings !------------------------------------------------------------------------------! REAL :: ddx, ddx2, dx = 1.0, dx2, ddy, ddy2, dy = 1.0, dy2 REAL, DIMENSION(:), ALLOCATABLE :: ddx2_mg, ddy2_mg REAL, DIMENSION(:,:), ALLOCATABLE :: fwxm, fwxp, fwym, fwyp, fxm, fxp, & fym, fyp, wall_e_x, wall_e_y, & wall_u, wall_v, wall_w_x, wall_w_y, & zu_s_inner, zw_w_inner SAVE END MODULE grid_variables MODULE indices !------------------------------------------------------------------------------! ! Description: ! ------------ ! Definition of array bounds and number of gridpoints !------------------------------------------------------------------------------! INTEGER :: ngp_sums, nnx, nx = 0, nxa, nxl, nxlu, nxr, nxra, nx_on_file, & nny, ny = 0, nya, nyn, nyna, nys, nysv, ny_on_file, nnz, & nz = 0, nza, nzb, nzb_diff, nzt, nzta, nzt_diff INTEGER, DIMENSION(:), ALLOCATABLE :: & ngp_2dh, ngp_3d, ngp_3d_inner, & nnx_pe, nny_pe, nxl_mg, nxr_mg, nyn_mg, nys_mg, nzt_mg INTEGER, DIMENSION(:,:), ALLOCATABLE :: & ngp_2dh_outer, ngp_2dh_s_inner, mg_loc_ind, nzb_diff_s_inner, & nzb_diff_s_outer, nzb_diff_u, nzb_diff_v, nzb_inner, nzb_outer,& nzb_s_inner, nzb_s_outer, nzb_u_inner, nzb_u_outer, & nzb_v_inner, nzb_v_outer, nzb_w_inner, nzb_w_outer, nzb_2d INTEGER, DIMENSION(:,:,:), POINTER :: flags INTEGER, DIMENSION(:,:,:), ALLOCATABLE, TARGET :: wall_flags_1, & wall_flags_2, wall_flags_3, wall_flags_4, wall_flags_5, & wall_flags_6, wall_flags_7, wall_flags_8, wall_flags_9, & wall_flags_10 SAVE END MODULE indices MODULE interfaces !------------------------------------------------------------------------------! ! Description: ! ------------ ! Interfaces for special subroutines which use optional parameters !------------------------------------------------------------------------------! INTERFACE SUBROUTINE cpu_log( log_event, place, modus, barrierwait ) USE cpulog CHARACTER (LEN=*) :: modus, place CHARACTER (LEN=*), OPTIONAL :: barrierwait TYPE(logpoint) :: log_event END SUBROUTINE cpu_log END INTERFACE INTERFACE SUBROUTINE global_min_max ( i1, i2, j1, j2, k1, k2, feld, mode, wert, & wert_ijk, wert1, wert1_ijk ) CHARACTER (LEN=*), INTENT(IN) :: mode INTEGER, INTENT(IN) :: i1, i2, j1, j2, k1, k2 INTEGER :: wert_ijk(3) INTEGER, OPTIONAL :: wert1_ijk(3) REAL :: wert REAL, OPTIONAL :: wert1 REAL, INTENT(IN) :: feld(i1:i2,j1:j2,k1:k2) END SUBROUTINE global_min_max END INTERFACE SAVE END MODULE interfaces MODULE pointer_interfaces !------------------------------------------------------------------------------! ! Description: ! ------------ ! Interfaces for subroutines with pointer arguments called in ! prognostic_equations !------------------------------------------------------------------------------! INTERFACE SUBROUTINE advec_s_bc( sk, sk_char ) CHARACTER (LEN=*), INTENT(IN) :: sk_char REAL, DIMENSION(:,:,:), POINTER :: sk END SUBROUTINE advec_s_bc END INTERFACE SAVE END MODULE pointer_interfaces MODULE model_1d !------------------------------------------------------------------------------! ! Description: ! ------------ ! Definition of variables for the 1D-model !------------------------------------------------------------------------------! INTEGER :: current_timestep_number_1d = 0, damp_level_ind_1d, & last_dt_change_1d = 0 LOGICAL :: run_control_header_1d = .FALSE., stop_dt_1d = .FALSE. REAL :: damp_level_1d = -1.0, dt_1d = 60.0, dt_max_1d = 300.0, & dt_pr_1d = 9999999.9, dt_run_control_1d = 60.0, & end_time_1d = 864000.0, old_dt_1d = 1.0E-10, & qs1d, simulated_time_1d = 0.0, time_pr_1d = 0.0, & time_run_control_1d = 0.0, ts1d, us1d, usws1d, usws1d_m, & vsws1d, vsws1d_m, z01d REAL, DIMENSION(:), ALLOCATABLE :: e1d, e1d_m, e1d_p, kh1d, kh1d_m, km1d, & km1d_m, l_black, l1d, l1d_m, rif1d, & te_e, te_em, te_u, te_um, te_v, te_vm, & u1d, u1d_m, u1d_p, v1d, v1d_m, v1d_p SAVE END MODULE model_1d MODULE netcdf_control !------------------------------------------------------------------------------! ! Description: ! ------------ ! Definition of parameters and variables for netcdf control. !------------------------------------------------------------------------------! USE control_parameters #if defined( __netcdf ) USE netcdf #endif INTEGER, PARAMETER :: dopr_norm_num = 7, dopts_num = 26, dots_max = 100, & replace_num = 6 INTEGER :: dots_num = 23 CHARACTER, DIMENSION( replace_num ) :: & replace_char = (/ '''', '"', '*', '/', '(', ')' /), & replace_by = (/ 'p' , 'p', 's', 'o', '_', '_' /) CHARACTER (LEN=6), DIMENSION(dopr_norm_num) :: dopr_norm_names = & (/ 'wpt0 ', 'ws2 ', 'tsw2 ', 'ws3 ', 'ws2tsw', 'wstsw2', & 'z_i ' /) CHARACTER (LEN=6), DIMENSION(dopr_norm_num) :: dopr_norm_longnames = & (/ 'wpt0 ', 'w*2 ', 't*w2 ', 'w*3 ', 'w*2t*w', 'w*t*w2', & 'z_i ' /) CHARACTER (LEN=7), DIMENSION(dopts_num) :: dopts_label = & (/ 'tnpt ', 'x_ ', 'y_ ', 'z_ ', 'z_abs ', 'u ', & 'v ', 'w ', 'u" ', 'v" ', 'w" ', 'npt_up ', & 'w_up ', 'w_down ', 'npt_max', 'npt_min', 'x*2 ', 'y*2 ', & 'z*2 ', 'u*2 ', 'v*2 ', 'w*2 ', 'u"2 ', 'v"2 ', & 'w"2 ', 'npt*2 ' /) CHARACTER (LEN=7), DIMENSION(dopts_num) :: dopts_unit = & (/ 'number ', 'm ', 'm ', 'm ', 'm ', 'm/s ', & 'm/s ', 'm/s ', 'm/s ', 'm/s ', 'm/s ', 'number ', & 'm/s ', 'm/s ', 'number ', 'number ', 'm2 ', 'm2 ', & 'm2 ', 'm2/s2 ', 'm2/s2 ', 'm2/s2 ', 'm2/s2 ', 'm2/s2 ', & 'm2/s2 ', 'number2' /) CHARACTER (LEN=7), DIMENSION(dots_max) :: dots_label = & (/ 'E ', 'E* ', 'dt ', 'u* ', 'th* ', 'umax ', & 'vmax ', 'wmax ', 'div_new', 'div_old', 'z_i_wpt', 'z_i_pt ', & 'w* ', 'w"pt"0 ', 'w"pt" ', 'wpt ', 'pt(0) ', 'pt(zp) ', & 'w"u"0 ', 'w"v"0 ', 'w"q"0 ', 'mo_L ', 'q* ', & ( 'unknown', i9 = 1, dots_max-23 ) /) CHARACTER (LEN=7), DIMENSION(dots_max) :: dots_unit = & (/ 'm2/s2 ', 'm2/s2 ', 's ', 'm/s ', 'K ', 'm/s ', & 'm/s ', 'm/s ', 's-1 ', 's-1 ', 'm ', 'm ', & 'm/s ', 'K m/s ', 'K m/s ', 'K m/s ', 'K ', 'K ', & 'm2/s2 ', 'm2/s2 ', 'kg m/s ', 'm ', 'kg/kg ', & ( 'unknown', i9 = 1, dots_max-23 ) /) CHARACTER (LEN=7), DIMENSION(300) :: dopr_unit = 'unknown' CHARACTER (LEN=7), DIMENSION(0:1,100) :: do2d_unit, do3d_unit CHARACTER (LEN=16), DIMENSION(25) :: prt_var_names = & (/ 'pt_age ', 'pt_dvrp_size ', 'pt_origin_x ', & 'pt_origin_y ', 'pt_origin_z ', 'pt_radius ', & 'pt_speed_x ', 'pt_speed_y ', 'pt_speed_z ', & 'pt_weight_factor', 'pt_x ', 'pt_y ', & 'pt_z ', 'pt_color ', 'pt_group ', & 'pt_tailpoints ', 'pt_tail_id ', 'pt_density_ratio', & 'pt_exp_arg ', 'pt_exp_term ', 'not_used ', & 'not_used ', 'not_used ', 'not_used ', & 'not_used ' /) CHARACTER (LEN=16), DIMENSION(25) :: prt_var_units = & (/ 'seconds ', 'meters ', 'meters ', & 'meters ', 'meters ', 'meters ', & 'm/s ', 'm/s ', 'm/s ', & 'factor ', 'meters ', 'meters ', & 'meters ', 'none ', 'none ', & 'none ', 'none ', 'ratio ', & 'none ', 'none ', 'not_used ', & 'not_used ', 'not_used ', 'not_used ', & 'not_used ' /) INTEGER :: id_dim_prtnum, id_dim_time_pr, id_dim_time_prt, & id_dim_time_pts, id_dim_time_sp, id_dim_time_ts, id_dim_x_sp, & id_dim_y_sp, id_dim_zu_sp, id_dim_zw_sp, id_set_pr, & id_set_prt, id_set_pts, id_set_sp, id_set_ts, id_var_prtnum, & id_var_rnop_prt, id_var_time_pr, id_var_time_prt, & id_var_time_pts, id_var_time_sp, id_var_time_ts, id_var_x_sp, & id_var_y_sp, id_var_zu_sp, id_var_zw_sp, nc_stat INTEGER, DIMENSION(0:1) :: id_dim_time_xy, id_dim_time_xz, & id_dim_time_yz, id_dim_time_3d, id_dim_x_xy, id_dim_xu_xy, & id_dim_x_xz, id_dim_xu_xz, id_dim_x_yz, id_dim_xu_yz, & id_dim_x_3d, id_dim_xu_3d, id_dim_y_xy, id_dim_yv_xy, & id_dim_y_xz, id_dim_yv_xz, id_dim_y_yz, id_dim_yv_yz, & id_dim_y_3d, id_dim_yv_3d, id_dim_zu_xy, id_dim_zu1_xy, & id_dim_zu_xz, id_dim_zu_yz, id_dim_zu_3d, id_dim_zw_xy, & id_dim_zw_xz, id_dim_zw_yz, id_dim_zw_3d, id_set_xy, & id_set_xz, id_set_yz, id_set_3d, id_var_ind_x_yz, & id_var_ind_y_xz, id_var_ind_z_xy, id_var_time_xy, & id_var_time_xz, id_var_time_yz, id_var_time_3d, id_var_x_xy, & id_var_xu_xy, id_var_x_xz, id_var_xu_xz, id_var_x_yz, & id_var_xu_yz, id_var_x_3d, id_var_xu_3d, id_var_y_xy, & id_var_yv_xy, id_var_y_xz, id_var_yv_xz, id_var_y_yz, & id_var_yv_yz, id_var_y_3d, id_var_yv_3d, id_var_zusi_xy, & id_var_zusi_3d, id_var_zu_xy, id_var_zu1_xy, id_var_zu_xz, & id_var_zu_yz, id_var_zu_3d, id_var_zwwi_xy, id_var_zwwi_3d, & id_var_zw_xy, id_var_zw_xz, id_var_zw_yz, id_var_zw_3d INTEGER, DIMENSION(10) :: id_var_dospx, id_var_dospy INTEGER, DIMENSION(20) :: id_var_prt INTEGER, DIMENSION(50) :: nc_precision INTEGER, DIMENSION(dopr_norm_num) :: id_var_norm_dopr INTEGER, DIMENSION(dopts_num,0:10) :: id_var_dopts INTEGER, DIMENSION(0:1,100) :: id_var_do2d, id_var_do3d INTEGER, DIMENSION(100,0:9) :: id_dim_z_pr, id_var_dopr, & id_var_z_pr INTEGER, DIMENSION(dots_max,0:9) :: id_var_dots ! !-- masked output CHARACTER (LEN=7), DIMENSION(max_masks,0:1,100) :: domask_unit LOGICAL :: output_for_t0 = .FALSE. INTEGER, DIMENSION(1:max_masks,0:1) :: id_dim_time_mask, id_dim_x_mask, & id_dim_xu_mask, id_dim_y_mask, id_dim_yv_mask, id_dim_zu_mask, & id_dim_zw_mask, & id_set_mask, & id_var_time_mask, id_var_x_mask, id_var_xu_mask, & id_var_y_mask, id_var_yv_mask, id_var_zu_mask, id_var_zw_mask, & id_var_zusi_mask, id_var_zwwi_mask INTEGER, DIMENSION(1:max_masks,0:1,100) :: id_var_domask SAVE END MODULE netcdf_control MODULE particle_attributes !------------------------------------------------------------------------------! ! Description: ! ------------ ! Definition of variables used to compute particle transport !------------------------------------------------------------------------------! USE array_kind CHARACTER (LEN=15) :: bc_par_lr = 'cyclic', bc_par_ns = 'cyclic', & bc_par_b = 'reflect', bc_par_t = 'absorb' #if defined( __parallel ) INTEGER :: mpi_particle_type #endif INTEGER :: ibc_par_lr, ibc_par_ns, ibc_par_b, ibc_par_t, & iran_part = -1234567, maximum_number_of_particles = 1000, & maximum_number_of_tailpoints = 100, & maximum_number_of_tails = 0, & number_of_initial_particles = 0, number_of_particles = 0, & number_of_particle_groups = 1, number_of_tails = 0, & number_of_initial_tails = 0, offset_ocean_nzt = 0, & offset_ocean_nzt_m1 = 0, particles_per_point = 1, & particle_file_count = 0, skip_particles_for_tail = 100, & total_number_of_particles, total_number_of_tails = 0 INTEGER, PARAMETER :: max_number_of_particle_groups = 10 INTEGER, DIMENSION(:), ALLOCATABLE :: new_tail_id INTEGER, DIMENSION(:,:,:), ALLOCATABLE :: prt_count, prt_start_index LOGICAL :: particle_advection = .FALSE., random_start_position = .FALSE., & read_particles_from_restartfile = .TRUE., & uniform_particles = .TRUE., use_particle_tails = .FALSE., & use_sgs_for_particles = .FALSE., & write_particle_statistics = .FALSE. LOGICAL, DIMENSION(max_number_of_particle_groups) :: & vertical_particle_advection = .TRUE. LOGICAL, DIMENSION(:), ALLOCATABLE :: particle_mask, tail_mask REAL :: c_0 = 3.0, dt_min_part = 0.0002, dt_sort_particles = 0.0, & dt_write_particle_data = 9999999.9, dvrp_psize = 9999999.9, & end_time_prel = 9999999.9, initial_weighting_factor = 1.0, & maximum_tailpoint_age = 100000.0, & minimum_tailpoint_distance = 0.0, & particle_advection_start = 0.0, sgs_wfu_part = 0.3333333, & sgs_wfv_part = 0.3333333, sgs_wfw_part = 0.3333333, & time_sort_particles = 0.0, time_write_particle_data = 0.0 REAL, DIMENSION(max_number_of_particle_groups) :: & density_ratio = 9999999.9, pdx = 9999999.9, pdy = 9999999.9, & pdz = 9999999.9, psb = 9999999.9, psl = 9999999.9, & psn = 9999999.9, psr = 9999999.9, pss = 9999999.9, & pst = 9999999.9, radius = 9999999.9 REAL, DIMENSION(:,:,:), ALLOCATABLE :: particle_tail_coordinates TYPE particle_type SEQUENCE REAL :: age, age_m, dt_sum, dvrp_psize, e_m, origin_x, origin_y, & origin_z, radius, speed_x, speed_x_sgs, speed_y, & speed_y_sgs, speed_z, speed_z_sgs, weight_factor, x, y, z INTEGER :: color, group, tailpoints, tail_id END TYPE particle_type TYPE(particle_type), DIMENSION(:), ALLOCATABLE :: initial_particles, & particles TYPE particle_groups_type SEQUENCE REAL :: density_ratio, radius, exp_arg, exp_term END TYPE particle_groups_type TYPE(particle_groups_type), DIMENSION(max_number_of_particle_groups) ::& particle_groups SAVE END MODULE particle_attributes MODULE pegrid !------------------------------------------------------------------------------! ! Description: ! ------------ ! Definition of variables which define processor topology and the exchange of ! ghost point layers. This modules must be placed in all routines which contain ! MPI-calls. !------------------------------------------------------------------------------! #if defined( __parallel ) #if defined( __lc ) USE MPI #else INCLUDE "mpif.h" #endif #endif CHARACTER(LEN=5) :: myid_char = '' INTEGER :: id_inflow = 0, id_recycling = 0, myid = 0, & target_id, npex = -1, npey = -1, numprocs = 1, & numprocs_previous_run = -1, & tasks_per_node = -9999, threads_per_task = 1 INTEGER, DIMENSION(:,:), ALLOCATABLE :: hor_index_bounds, & hor_index_bounds_previous_run #if defined( __parallel ) #if defined( __mpi2 ) CHARACTER (LEN=MPI_MAX_PORT_NAME) :: port_name #endif INTEGER :: comm1dx, comm1dy, comm2d, comm_inter, comm_palm, ierr, myidx, & myidy, ndim = 2, ngp_xy, ngp_y, pleft, pnorth, pright, psouth, & sendrecvcount_xy, sendrecvcount_yz, sendrecvcount_zx, & sendrecvcount_zyd, sendrecvcount_yxd, & type_x, type_x_int, type_xy INTEGER :: ibuf(12), pcoord(2), pdims(2), status(MPI_STATUS_SIZE) INTEGER, DIMENSION(:), ALLOCATABLE :: ngp_yz, type_xz LOGICAL :: reorder = .TRUE. LOGICAL, DIMENSION(2) :: cyclic = (/ .TRUE. , .TRUE. /), & remain_dims #endif SAVE END MODULE pegrid MODULE profil_parameter !------------------------------------------------------------------------------! ! Description: ! ------------ ! Definition of variables which control PROFIL-output !------------------------------------------------------------------------------! INTEGER, PARAMETER :: crmax = 100 CHARACTER (LEN=10), DIMENSION(100) :: dopr_label = ' ' CHARACTER (LEN=10), DIMENSION(crmax) :: cross_normalized_x = ' ', & cross_normalized_y = ' ' CHARACTER (LEN=20), DIMENSION(20) :: cross_ts_profiles = & (/ ' E E* ', ' dt ', & ' u* w* ', ' th* ', & ' umax vmax wmax ', ' div_old div_new ', & ' z_i_wpt z_i_pt ', ' w"pt"0 w"pt" wpt ', & ' pt(0) pt(zp) ', ' splux spluy spluz ', & ' L ', & ( ' ', i9 = 1, 9 ) /) CHARACTER (LEN=40), DIMENSION(crmax) :: cross_xtext = & (/ 'windspeed in ms>->1 ', & 'pot. temperature in K ', & 'heat flux in K ms>->1 ', & 'momentum flux in m>2s>2 ', & 'eddy diffusivity in m>2s>->1', & 'mixing length in m ', & ( ' ', i9 = 1, 94 ) /) CHARACTER (LEN=100), DIMENSION(crmax) :: cross_profiles = & (/ ' u v ', & ' pt ', & ' w"pt" w*pt* w*pt*BC wpt wptBC ', & ' w"u" w*u* wu w"v" w*v* wv ', & ' km kh ', & ' l ', & ( ' ', i9 = 1, 94 ) /) INTEGER :: profile_columns = 3, profile_rows = 2, profile_number = 0 INTEGER :: cross_linecolors(100,crmax) = 1, & cross_linestyles(100,crmax) = 0, & cross_profile_numbers(100,crmax) = 0, & cross_pnc_local(crmax), cross_profile_number_count(crmax) = 0, & cross_ts_numbers(crmax,crmax) = 0, & cross_ts_number_count(crmax) = 0, dopr_crossindex(100) = 0, & dopr_index(300) = 0, dopr_initial_index(300) = 0, & dots_crossindex(100) = 0, dots_index(100) = 0, & linecolors(10) = (/ 2, 3, 4, 5, 7, 8, 12, 15, 16, 23 /), & linestyles(11) = (/ 0, 7, 3, 10, 4, 1, 9, 2, 5, 8, 6 /) REAL :: cross_normx_factor(100,crmax) = 1.0, & cross_normy_factor(100,crmax) = 1.0, & cross_ts_uymax(20) = & (/ 999.999, 999.999, 999.999, 999.999, 999.999, & 999.999, 999.999, 999.999, 999.999, 999.999, & 999.999, 999.999, 999.999, 999.999, 999.999, & 999.999, 999.999, 999.999, 999.999, 999.999 /),& cross_ts_uymax_computed(20) = 999.999, & cross_ts_uymin(20) = & (/ 999.999, 999.999, 999.999, -5.000, 999.999, & 999.999, 0.000, 999.999, 999.999, 999.999, & 999.999, 999.999, 999.999, 999.999, 999.999, & 999.999, 999.999, 999.999, 999.999, 999.999 /),& cross_ts_uymin_computed(20) = 999.999, & cross_uxmax(crmax) = 0.0, cross_uxmax_computed(crmax) = -1.0, & cross_uxmax_normalized(crmax) = 0.0, & cross_uxmax_normalized_computed(crmax) = -1.0, & cross_uxmin(crmax) = 0.0, cross_uxmin_computed(crmax) = 1.0, & cross_uxmin_normalized(crmax) = 0.0, & cross_uxmin_normalized_computed(crmax) = 1.0, & cross_uymax(crmax), cross_uymin(crmax) SAVE END MODULE profil_parameter MODULE spectrum !------------------------------------------------------------------------------! ! Description: ! ------------ ! Definition of quantities used for computing spectra !------------------------------------------------------------------------------! CHARACTER (LEN=6), DIMENSION(1:5) :: header_char = (/ 'PS(u) ', 'PS(v) ',& 'PS(w) ', 'PS(pt)', 'PS(q) ' /) CHARACTER (LEN=2), DIMENSION(10) :: spectra_direction = 'x' CHARACTER (LEN=10), DIMENSION(10) :: data_output_sp = ' ' CHARACTER (LEN=25), DIMENSION(1:5) :: utext_char = & (/ '-power spectrum of u ', & '-power spectrum of v ', & '-power spectrum of w ', & '-power spectrum of ^1185 ', & '-power spectrum of q ' /) CHARACTER (LEN=39), DIMENSION(1:5) :: ytext_char = & (/ 'k ^2236 ^2566^25692s>->2 ', & 'k ^2236 ^2566^25692s>->2 ', & 'k ^2236 ^2566^25692s>->2 ', & 'k ^2236 ^2566^2569<^1185(k) in m>2s>->2', & 'k ^2236 ^2566^25692s>->2 ' /) INTEGER :: klist_x = 0, klist_y = 0, n_sp_x = 0, n_sp_y = 0 INTEGER :: comp_spectra_level(100) = 999999, & lstyles(100) = (/ 0, 7, 3, 10, 1, 4, 9, 2, 6, 8, & 0, 7, 3, 10, 1, 4, 9, 2, 6, 8, & 0, 7, 3, 10, 1, 4, 9, 2, 6, 8, & 0, 7, 3, 10, 1, 4, 9, 2, 6, 8, & 0, 7, 3, 10, 1, 4, 9, 2, 6, 8, & 0, 7, 3, 10, 1, 4, 9, 2, 6, 8, & 0, 7, 3, 10, 1, 4, 9, 2, 6, 8, & 0, 7, 3, 10, 1, 4, 9, 2, 6, 8, & 0, 7, 3, 10, 1, 4, 9, 2, 6, 8, & 0, 7, 3, 10, 1, 4, 9, 2, 6, 8 /), & plot_spectra_level(100) = 999999 REAL :: time_to_start_sp = 0.0 SAVE END MODULE spectrum MODULE statistics !------------------------------------------------------------------------------! ! Description: ! ------------ ! Definition of statistical quantities, e.g. global sums !------------------------------------------------------------------------------! CHARACTER (LEN=40) :: region(0:9) INTEGER :: pr_palm = 80, statistic_regions = 0 INTEGER :: u_max_ijk(3), v_max_ijk(3), w_max_ijk(3) LOGICAL :: flow_statistics_called = .FALSE. REAL :: u_max, v_max, w_max REAL, DIMENSION(:), ALLOCATABLE :: sums_divnew_l, sums_divold_l REAL, DIMENSION(:,:), ALLOCATABLE :: sums, sums_wsts_bc_l, ts_value REAL, DIMENSION(:,:,:), ALLOCATABLE :: hom_sum, rmask, spectrum_x, & spectrum_y, sums_l, sums_l_l, & sums_up_fraction_l REAL, DIMENSION(:,:,:,:), ALLOCATABLE :: hom SAVE END MODULE statistics MODULE transpose_indices !------------------------------------------------------------------------------! ! Description: ! ------------ ! Definition of indices for transposed arrays !------------------------------------------------------------------------------! INTEGER :: nxl_y, nxl_yd, nxl_z, nxr_y, nxr_ya, nxr_yd, nxr_yda, nxr_z, & nxr_za, nyn_x, nyn_xa, nyn_z, nyn_za, nys_x, nys_z, nzb_x, & nzb_y, nzb_yd, nzt_x, nzt_xa, nzt_y, nzt_ya, nzt_yd, nzt_yda SAVE END MODULE transpose_indices