Home

Context Navigation

source: palm/trunk/SOURCE/module_interface.f90 @ 4476

Last change on this file since 4476 was 4414, checked in by suehring, 5 years ago
Remove deprecated topography arrays; Move basic initialization of numerics into an extra module interface
Property svn:keywords set to `Id`
File size: 88.5 KB

Line
1	!> @file module_interface.f90
2	!------------------------------------------------------------------------------!
3	! This file is part of PALM.
4	!
5	! PALM is free software: you can redistribute it and/or modify it under the
6	! terms of the GNU General Public License as published by the Free Software
7	! Foundation, either version 3 of the License, or (at your option) any later
8	! version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2020 Leibniz Universitaet Hannover
18	!------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: module_interface.f90 4414 2020-02-19 20:16:04Z maronga $
27	! Add module interface for basic initialization of numerics.
28	!
29	! 4411 2020-02-18 14:28:02Z maronga
30	! Added output routines for WTM
31	!
32	! 4407 2020-02-13 20:31:44Z knoop
33	! Changed program_debug_output_unit to 9 in dom_init call
34	!
35	! 4400 2020-02-10 20:32:41Z suehring
36	! - Use data-output module for virtual measurement output
37	! - Remove deprecated routines for virtual measurement module
38	!
39	! 4361 2020-01-07 12:22:38Z suehring
40	! Remove unused arrays in pmc_rrd_local
41	!
42	! 4360 2020-01-07 11:25:50Z suehring
43	! Add pcm_rrd_local and pcm_wrd_local
44	!
45	! 4331 2019-12-10 18:25:02Z suehring
46	! Change interface for doq_check_data_output, in order to perform further
47	! output checks.
48	!
49	! 4281 2019-10-29 15:15:39Z schwenkel
50	! Added dynamics boundary conditions
51	!
52	! 4272 2019-10-23 15:18:57Z schwenkel
53	! Further modularization of boundary conditions: moved boundary conditions to
54	! respective modules
55	!
56	! 4268 2019-10-17 11:29:38Z schwenkel
57	! Introduction of module_interface_boundary_conditions
58	!
59	! 4182 2019-08-22 15:20:23Z scharf
60	! Corrected "Former revisions" section
61	!
62	! 4173 2019-08-20 12:04:06Z gronemeier
63	! add vdi_internal_controls
64	!
65	! 4157 2019-08-14 09:19:12Z suehring
66	! Call doq_init from module interface
67	!
68	! 4132 2019-08-02 12:34:17Z suehring
69	! Bugfix in masked data output for diagnostic quantities
70	!
71	! 4131 2019-08-02 11:06:18Z monakurppa
72	! Add output of 3D plant-canopy outputs (merge from branch resler)
73	!
74	! 4048 2019-06-21 21:00:21Z knoop
75	! Moved turbulence_closure_mod calls into this module_interface
76	!
77	! 4047 2019-06-21 18:58:09Z knoop
78	! Introduction of the dynamics module
79	!
80	! 4039 2019-06-18 10:32:41Z suehring
81	! Introduce diagnostic output
82	!
83	! 4028 2019-06-13 12:21:37Z schwenkel
84	! Further modularization of particle code components
85	!
86	! 4017 2019-06-06 12:16:46Z schwenkel
87	! local_pf need INTENT(INOUT) attribute rather than INTENT(OUT). This is
88	! because INTENT(OUT) sets the array to not-defined. Especially for outputs that
89	! are not defined everywhere, e.g. land-surface outputs, this will be
90	! problematic as NaN will be output.
91	!
92	! 3987 2019-05-22 09:52:13Z kanani
93	! Introduce switchable DEBUG file output via debug_message routine
94	!
95	! 3956 2019-05-07 12:32:52Z monakurppa
96	! - Added calls for salsa_non_advective_processes and
97	! salsa_exchange_horiz_bounds
98	! - Moved the call for salsa_data_output_2d/3d before that of
99	! radiation_data_output_2d/3d. radiation_data_output_2d/3d tries to read a
100	! salsa output variable and encounters a segmentation fault for "Ntot" due
101	! to the shortoutput name
102	!
103	! 3931 2019-04-24 16:34:28Z schwenkel
104	! Changed non_transport_physics to non_advective_processes
105	!
106	! 3930 2019-04-24 14:57:18Z forkel
107	! Correct/complete module_interface introduction for chemistry model
108	!
109	! 3887 2019 -04-12 08:47:41Z schwenkel
110	! Changes related to global restructuring of location messages and introduction
111	! of additional debug messages
112	!
113	! 3880 2019 -04-08 21:43:02Z knoop
114	! Add a call for salsa_prognostic_equations
115	!
116	! 3840 2019-03-29 10:35:52Z knoop
117	! bugfix: intent of dummy arguments changed to inout
118	!
119	! 3770 2019-02-28 11:22:32Z moh.hefny
120	! removed unused variables in module_interface_check_data_output_ts
121	!
122	! 3767 08:18:02Z raasch
123	! unused variable file_index removed from subroutine parameter list
124	!
125	! 3766 2019-02-26 16:23:41Z raasch
126	! first argument removed from module_interface_rrd_*, statement added to avoid
127	! compiler warning about unused variable, file reformatted with respect to coding
128	! standards
129	!
130	! 3762 2019-02-25 16:54:16Z suehring
131	! only pass required arguments to surface_data_output_rrd_local
132	!
133	! 3747 2019-02-16 15:15:23Z gronemeier
134	! Call user_init_arrays
135	!
136	! 3745 2019-02-15 18:57:56Z suehring
137	! Add indoor model
138	!
139	! 3744 2019-02-15 18:38:58Z suehring
140	! Removed bio_check_parameters as the method is empty.
141	!
142	! 3735 2019-02-12 09:52:40Z dom_dwd_user
143	! Accepting variable j from check_parameters and passing it to
144	! bio_check_data_output
145	! Add required restart data for surface output module
146	!
147	! 3731 2019-02-11 13:06:27Z suehring
148	! Add check_parameters routine for virtual measurements
149	!
150	! 3711 2019-01-31 13:44:26Z knoop
151	! Introduced module_interface_init_checks for post-init checks
152	!
153	! 3705 2019-01-29 19:56:39Z suehring
154	! Add last_actions for virtual measurements
155	!
156	! 3704 2019-01-29 19:51:41Z suehring
157	! Some interface calls moved to module_interface + cleanup
158	!
159	! 3684 2019-01-20 20:20:58Z knoop
160	! Bugfix: made unit intend INOUT
161	!
162	! 3650 2019-01-04 13:01:33Z kanani
163	! Add restart routines for biometeorology
164	!
165	! 3649 2019-01-02 16:52:21Z suehring
166	! Initialize strings, in order to avoid compiler warnings for non-initialized
167	! characters with intent(out) attribute
168	!
169	! 3648 2019-01-02 16:35:46Z suehring
170	! 3641 2018-12-23 22:10:01Z knoop
171	! Initial implementation of the PALM module interface
172	!
173	!
174	! Description:
175	! ------------
176	!> This is the interface between the PALM model core and all its modules.
177	!>
178	!> @todo Re-format module to be consistent with coding standard
179	!------------------------------------------------------------------------------!
180	MODULE module_interface
181
182	USE indices, &
183	ONLY: nbgp, nxl, nxlg, nxr, nxrg, nys, nysg, nyn, nyng, nzb, nzt
184
185	USE kinds
186
187	USE pegrid, &
188	ONLY: comm2d
189
190	!
191	!-- load module-specific control parameters.
192	!-- ToDo: move all of them to respective module or a dedicated central module
193	USE data_output_module, &
194	ONLY: dom_def_end, &
195	dom_finalize_output, &
196	dom_init
197
198	USE dynamics_mod, &
199	ONLY: dynamics_parin, &
200	dynamics_check_parameters, &
201	dynamics_check_data_output_ts, &
202	dynamics_check_data_output_pr, &
203	dynamics_check_data_output, &
204	dynamics_init_masks, &
205	dynamics_define_netcdf_grid, &
206	dynamics_init_arrays, &
207	dynamics_init, &
208	dynamics_init_checks, &
209	dynamics_header, &
210	dynamics_actions, &
211	dynamics_non_advective_processes, &
212	dynamics_exchange_horiz, &
213	dynamics_prognostic_equations, &
214	dynamics_boundary_conditions, &
215	dynamics_swap_timelevel, &
216	dynamics_3d_data_averaging, &
217	dynamics_data_output_2d, &
218	dynamics_data_output_3d, &
219	dynamics_statistics, &
220	dynamics_rrd_global, &
221	dynamics_rrd_local, &
222	dynamics_wrd_global, &
223	dynamics_wrd_local, &
224	dynamics_last_actions
225
226	USE turbulence_closure_mod, &
227	ONLY: tcm_check_parameters, &
228	tcm_check_data_output, &
229	tcm_init_arrays, &
230	tcm_init, &
231	tcm_actions, &
232	tcm_prognostic_equations, &
233	tcm_boundary_conds, &
234	tcm_swap_timelevel, &
235	tcm_3d_data_averaging, &
236	tcm_data_output_2d, &
237	tcm_data_output_3d
238
239	USE control_parameters, &
240	ONLY: air_chemistry, &
241	biometeorology, &
242	coupling_char, &
243	debug_output, &
244	debug_output_timestep, &
245	indoor_model, &
246	land_surface, &
247	large_scale_forcing, &
248	nesting_offline, &
249	nudging, &
250	ocean_mode, &
251	plant_canopy, &
252	salsa, &
253	surface_output, &
254	syn_turb_gen, &
255	urban_surface, &
256	vdi_checks, &
257	virtual_flight, &
258	virtual_measurement, &
259	wind_turbine
260
261	!
262	!-- load interface routines of all PALM modules
263	USE biometeorology_mod, &
264	ONLY: bio_parin, &
265	bio_check_data_output, &
266	bio_init, &
267	bio_init_checks, &
268	bio_header, &
269	bio_3d_data_averaging, &
270	bio_data_output_2d, &
271	bio_data_output_3d, &
272	bio_rrd_global, &
273	bio_rrd_local, &
274	bio_wrd_global, &
275	bio_wrd_local
276
277	USE bulk_cloud_model_mod, &
278	ONLY: bulk_cloud_model, &
279	bcm_parin, &
280	bcm_check_parameters, &
281	bcm_check_data_output_pr, &
282	bcm_check_data_output, &
283	bcm_init_arrays, &
284	bcm_init, &
285	bcm_header, &
286	bcm_actions, &
287	bcm_non_advective_processes, &
288	bcm_exchange_horiz, &
289	bcm_prognostic_equations, &
290	bcm_boundary_conditions, &
291	bcm_swap_timelevel, &
292	bcm_3d_data_averaging, &
293	bcm_data_output_2d, &
294	bcm_data_output_3d, &
295	bcm_rrd_global, &
296	bcm_wrd_global, &
297	bcm_rrd_local, &
298	bcm_wrd_local
299
300	USE chemistry_model_mod, &
301	ONLY: chem_parin, &
302	chem_check_parameters, &
303	chem_check_data_output_pr, &
304	chem_check_data_output, &
305	chem_exchange_horiz_bounds, &
306	chem_init_arrays, &
307	chem_init, &
308	chem_header, &
309	chem_actions, &
310	chem_non_advective_processes, &
311	chem_prognostic_equations, &
312	chem_boundary_conditions, &
313	chem_swap_timelevel, &
314	chem_3d_data_averaging, &
315	chem_data_output_2d, &
316	chem_data_output_3d, &
317	chem_statistics, &
318	chem_rrd_local, &
319	chem_wrd_local
320
321	USE diagnostic_output_quantities_mod, &
322	ONLY: doq_3d_data_averaging, &
323	doq_check_data_output, &
324	doq_define_netcdf_grid, &
325	doq_init, &
326	doq_output_2d, &
327	doq_output_3d, &
328	doq_wrd_local
329	! doq_rrd_local, &
330
331	USE flight_mod, &
332	ONLY: flight_parin, &
333	flight_header, &
334	flight_init, &
335	flight_rrd_global, &
336	flight_wrd_global
337
338	USE gust_mod, &
339	ONLY: gust_module_enabled, &
340	gust_parin, &
341	gust_check_parameters, &
342	gust_check_data_output_pr, &
343	gust_check_data_output, &
344	gust_init_arrays, &
345	gust_init, &
346	gust_header, &
347	gust_actions, &
348	gust_prognostic_equations, &
349	gust_swap_timelevel, &
350	gust_3d_data_averaging, &
351	gust_data_output_2d, &
352	gust_data_output_3d, &
353	gust_statistics, &
354	gust_rrd_global, &
355	gust_wrd_global, &
356	gust_rrd_local, &
357	gust_wrd_local
358
359	USE indoor_model_mod, &
360	ONLY: im_parin, &
361	im_check_data_output, &
362	im_check_parameters, &
363	im_data_output_3d, &
364	im_init
365
366	USE lagrangian_particle_model_mod, &
367	ONLY: lpm_parin, &
368	lpm_header, &
369	lpm_check_parameters, &
370	lpm_init_arrays, &
371	lpm_init, &
372	lpm_actions, &
373	lpm_rrd_global, &
374	lpm_rrd_local, &
375	lpm_wrd_local, &
376	lpm_wrd_global
377
378	USE land_surface_model_mod, &
379	ONLY: lsm_parin, &
380	lsm_check_parameters, &
381	lsm_check_data_output_pr, &
382	lsm_check_data_output, &
383	lsm_init_arrays, &
384	lsm_init, &
385	lsm_header, &
386	lsm_swap_timelevel, &
387	lsm_3d_data_averaging, &
388	lsm_data_output_2d, &
389	lsm_rrd_local, &
390	lsm_wrd_local
391
392	USE lsf_nudging_mod, &
393	ONLY: lsf_nudging_check_parameters, &
394	lsf_nudging_check_data_output_pr, &
395	lsf_init, &
396	nudge_init, &
397	lsf_nudging_header
398
399	USE multi_agent_system_mod, &
400	ONLY: mas_parin
401
402	USE nesting_offl_mod, &
403	ONLY: nesting_offl_parin, &
404	nesting_offl_check_parameters, &
405	nesting_offl_header
406
407	USE ocean_mod, &
408	ONLY: ocean_parin, &
409	ocean_check_parameters, &
410	ocean_check_data_output_pr, &
411	ocean_check_data_output, &
412	ocean_init_arrays, &
413	ocean_init, &
414	ocean_header, &
415	ocean_actions, &
416	ocean_prognostic_equations, &
417	ocean_boundary_conditions, &
418	ocean_swap_timelevel, &
419	ocean_3d_data_averaging, &
420	ocean_data_output_2d, &
421	ocean_data_output_3d, &
422	ocean_rrd_global, &
423	ocean_wrd_global, &
424	ocean_rrd_local, &
425	ocean_wrd_local
426
427	USE particle_attributes, &
428	ONLY: particle_advection
429
430	USE poismg_noopt_mod, &
431	ONLY: poismg_noopt_init
432
433	USE plant_canopy_model_mod, &
434	ONLY: pcm_parin, &
435	pcm_check_parameters, &
436	pcm_check_data_output, &
437	pcm_init, &
438	pcm_header, &
439	pcm_3d_data_averaging, &
440	pcm_data_output_3d, &
441	pcm_rrd_local, &
442	pcm_wrd_local
443
444	USE radiation_model_mod, &
445	ONLY: radiation, &
446	radiation_parin, &
447	radiation_check_parameters, &
448	radiation_check_data_output_ts, &
449	radiation_check_data_output_pr, &
450	radiation_check_data_output, &
451	radiation_init, &
452	radiation_header, &
453	radiation_3d_data_averaging, &
454	radiation_data_output_2d, &
455	radiation_data_output_3d, &
456	radiation_rrd_local, &
457	radiation_wrd_local
458
459	USE salsa_mod, &
460	ONLY: salsa_parin, &
461	salsa_check_parameters, &
462	salsa_check_data_output_pr, &
463	salsa_check_data_output, &
464	salsa_init_arrays, &
465	salsa_init, &
466	salsa_header, &
467	salsa_actions, &
468	salsa_non_advective_processes, &
469	salsa_exchange_horiz_bounds, &
470	salsa_prognostic_equations, &
471	salsa_boundary_conditions, &
472	salsa_swap_timelevel, &
473	salsa_3d_data_averaging, &
474	salsa_data_output_2d, &
475	salsa_data_output_3d, &
476	salsa_statistics, &
477	salsa_rrd_local, &
478	salsa_wrd_local
479
480	USE spectra_mod, &
481	ONLY: calculate_spectra, &
482	spectra_parin, &
483	spectra_check_parameters, &
484	spectra_header
485
486	USE surface_data_output_mod, &
487	ONLY: surface_data_output_parin, &
488	surface_data_output_check_parameters, &
489	surface_data_output_init_arrays, &
490	surface_data_output_rrd_local, &
491	surface_data_output_rrd_global, &
492	surface_data_output_wrd_local, &
493	surface_data_output_wrd_global
494
495	USE surface_mod, &
496	ONLY: init_bc
497
498	USE synthetic_turbulence_generator_mod, &
499	ONLY: stg_parin, &
500	stg_check_parameters, &
501	stg_header, &
502	stg_rrd_global, &
503	stg_wrd_global
504
505	USE urban_surface_mod, &
506	ONLY: usm_parin, &
507	usm_check_parameters, &
508	usm_check_data_output, &
509	usm_init_arrays, &
510	usm_init, &
511	usm_swap_timelevel, &
512	usm_3d_data_averaging, &
513	usm_rrd_local, &
514	usm_wrd_local
515
516	USE vdi_internal_controls, &
517	ONLY: vdi_actions
518
519	USE virtual_measurement_mod, &
520	ONLY: vm_check_parameters, &
521	vm_init, &
522	vm_init_output, &
523	vm_parin
524
525	USE wind_turbine_model_mod, &
526	ONLY: wtm_parin, &
527	wtm_check_parameters, &
528	wtm_init, &
529	wtm_init_arrays, &
530	wtm_init_output, &
531	wtm_actions, &
532	wtm_rrd_global, &
533	wtm_wrd_global
534
535	USE user, &
536	ONLY: user_module_enabled, &
537	user_parin, &
538	user_check_parameters, &
539	user_check_data_output_ts, &
540	user_check_data_output_pr, &
541	user_check_data_output, &
542	user_init, &
543	user_init_arrays, &
544	user_header, &
545	user_actions, &
546	user_3d_data_averaging, &
547	user_data_output_2d, &
548	user_data_output_3d, &
549	user_statistics, &
550	user_rrd_global, &
551	user_rrd_local, &
552	user_wrd_global, &
553	user_wrd_local, &
554	user_last_actions
555
556	IMPLICIT NONE
557
558	PRIVATE
559
560	!
561	!-- Public functions
562	PUBLIC &
563	module_interface_parin, &
564	module_interface_check_parameters, &
565	module_interface_check_data_output_ts, &
566	module_interface_check_data_output_pr, &
567	module_interface_check_data_output, &
568	module_interface_init_masks, &
569	module_interface_define_netcdf_grid, &
570	module_interface_init_arrays, &
571	module_interface_init, &
572	module_interface_init_checks, &
573	module_interface_init_numerics, &
574	module_interface_init_output, &
575	module_interface_header, &
576	module_interface_actions, &
577	module_interface_non_advective_processes, &
578	module_interface_exchange_horiz, &
579	module_interface_prognostic_equations, &
580	module_interface_boundary_conditions, &
581	module_interface_swap_timelevel, &
582	module_interface_3d_data_averaging, &
583	module_interface_data_output_2d, &
584	module_interface_data_output_3d, &
585	module_interface_statistics, &
586	module_interface_rrd_global, &
587	module_interface_wrd_global, &
588	module_interface_rrd_local, &
589	module_interface_wrd_local, &
590	module_interface_last_actions
591
592
593	INTERFACE module_interface_parin
594	MODULE PROCEDURE module_interface_parin
595	END INTERFACE module_interface_parin
596
597	INTERFACE module_interface_check_parameters
598	MODULE PROCEDURE module_interface_check_parameters
599	END INTERFACE module_interface_check_parameters
600
601	INTERFACE module_interface_check_data_output_ts
602	MODULE PROCEDURE module_interface_check_data_output_ts
603	END INTERFACE module_interface_check_data_output_ts
604
605	INTERFACE module_interface_check_data_output_pr
606	MODULE PROCEDURE module_interface_check_data_output_pr
607	END INTERFACE module_interface_check_data_output_pr
608
609	INTERFACE module_interface_check_data_output
610	MODULE PROCEDURE module_interface_check_data_output
611	END INTERFACE module_interface_check_data_output
612
613	INTERFACE module_interface_init_masks
614	MODULE PROCEDURE module_interface_init_masks
615	END INTERFACE module_interface_init_masks
616
617	INTERFACE module_interface_define_netcdf_grid
618	MODULE PROCEDURE module_interface_define_netcdf_grid
619	END INTERFACE module_interface_define_netcdf_grid
620
621	INTERFACE module_interface_init_arrays
622	MODULE PROCEDURE module_interface_init_arrays
623	END INTERFACE module_interface_init_arrays
624
625	INTERFACE module_interface_init
626	MODULE PROCEDURE module_interface_init
627	END INTERFACE module_interface_init
628
629	INTERFACE module_interface_init_checks
630	MODULE PROCEDURE module_interface_init_checks
631	END INTERFACE module_interface_init_checks
632
633	INTERFACE module_interface_init_numerics
634	MODULE PROCEDURE module_interface_init_numerics
635	END INTERFACE module_interface_init_numerics
636
637	INTERFACE module_interface_init_output
638	MODULE PROCEDURE module_interface_init_output
639	END INTERFACE module_interface_init_output
640
641	INTERFACE module_interface_header
642	MODULE PROCEDURE module_interface_header
643	END INTERFACE module_interface_header
644
645	INTERFACE module_interface_actions
646	MODULE PROCEDURE module_interface_actions
647	MODULE PROCEDURE module_interface_actions_ij
648	END INTERFACE module_interface_actions
649
650	INTERFACE module_interface_non_advective_processes
651	MODULE PROCEDURE module_interface_non_advective_processes
652	MODULE PROCEDURE module_interface_non_advective_processes_ij
653	END INTERFACE module_interface_non_advective_processes
654
655	INTERFACE module_interface_exchange_horiz
656	MODULE PROCEDURE module_interface_exchange_horiz
657	END INTERFACE module_interface_exchange_horiz
658
659	INTERFACE module_interface_prognostic_equations
660	MODULE PROCEDURE module_interface_prognostic_equations
661	MODULE PROCEDURE module_interface_prognostic_equations_ij
662	END INTERFACE module_interface_prognostic_equations
663
664	INTERFACE module_interface_swap_timelevel
665	MODULE PROCEDURE module_interface_swap_timelevel
666	END INTERFACE module_interface_swap_timelevel
667
668	INTERFACE module_interface_boundary_conditions
669	MODULE PROCEDURE module_interface_boundary_conditions
670	END INTERFACE module_interface_boundary_conditions
671
672	INTERFACE module_interface_3d_data_averaging
673	MODULE PROCEDURE module_interface_3d_data_averaging
674	END INTERFACE module_interface_3d_data_averaging
675
676	INTERFACE module_interface_data_output_2d
677	MODULE PROCEDURE module_interface_data_output_2d
678	END INTERFACE module_interface_data_output_2d
679
680	INTERFACE module_interface_data_output_3d
681	MODULE PROCEDURE module_interface_data_output_3d
682	END INTERFACE module_interface_data_output_3d
683
684	INTERFACE module_interface_statistics
685	MODULE PROCEDURE module_interface_statistics
686	END INTERFACE module_interface_statistics
687
688	INTERFACE module_interface_rrd_global
689	MODULE PROCEDURE module_interface_rrd_global
690	END INTERFACE module_interface_rrd_global
691
692	INTERFACE module_interface_wrd_global
693	MODULE PROCEDURE module_interface_wrd_global
694	END INTERFACE module_interface_wrd_global
695
696	INTERFACE module_interface_rrd_local
697	MODULE PROCEDURE module_interface_rrd_local
698	END INTERFACE module_interface_rrd_local
699
700	INTERFACE module_interface_wrd_local
701	MODULE PROCEDURE module_interface_wrd_local
702	END INTERFACE module_interface_wrd_local
703
704	INTERFACE module_interface_last_actions
705	MODULE PROCEDURE module_interface_last_actions
706	END INTERFACE module_interface_last_actions
707
708
709	CONTAINS
710
711
712	!------------------------------------------------------------------------------!
713	! Description:
714	! ------------
715	!> Read module-specific parameter namelists
716	!------------------------------------------------------------------------------!
717	SUBROUTINE module_interface_parin
718
719
720	IF ( debug_output ) CALL debug_message( 'reading module-specific parameters', 'start' )
721
722	CALL dynamics_parin
723
724	CALL bio_parin
725	CALL bcm_parin
726	CALL chem_parin
727	CALL flight_parin ! ToDo: rename module to match filename
728	CALL gust_parin
729	CALL im_parin
730	CALL lpm_parin
731	CALL lsm_parin
732	! ToDo: create parin routine for large_scale_forcing and nudging (should be seperate modules or new module switch)
733	CALL mas_parin
734	CALL nesting_offl_parin
735	CALL ocean_parin
736	CALL pcm_parin
737	CALL radiation_parin
738	CALL salsa_parin
739	CALL spectra_parin
740	CALL surface_data_output_parin
741	CALL stg_parin
742	CALL usm_parin
743	CALL vm_parin
744	CALL wtm_parin
745
746	CALL user_parin
747
748	IF ( debug_output ) CALL debug_message( 'reading module-specific parameters', 'end' )
749
750
751	END SUBROUTINE module_interface_parin
752
753
754	!------------------------------------------------------------------------------!
755	! Description:
756	! ------------
757	!> Perform module-specific initialization checks
758	!------------------------------------------------------------------------------!
759	SUBROUTINE module_interface_check_parameters
760
761
762	IF ( debug_output ) CALL debug_message( 'checking module-specific parameters', 'start' )
763
764	CALL dynamics_check_parameters
765	CALL tcm_check_parameters
766
767	IF ( bulk_cloud_model ) CALL bcm_check_parameters
768	IF ( air_chemistry ) CALL chem_check_parameters
769	IF ( gust_module_enabled ) CALL gust_check_parameters
770	IF ( indoor_model ) CALL im_check_parameters
771	IF ( particle_advection ) CALL lpm_check_parameters
772	IF ( land_surface ) CALL lsm_check_parameters
773	IF ( large_scale_forcing .OR. nudging ) CALL lsf_nudging_check_parameters ! ToDo: create single module switch
774	IF ( nesting_offline ) CALL nesting_offl_check_parameters
775	IF ( ocean_mode ) CALL ocean_check_parameters
776	IF ( plant_canopy ) CALL pcm_check_parameters
777	IF ( radiation ) CALL radiation_check_parameters
778	IF ( salsa ) CALL salsa_check_parameters
779	IF ( calculate_spectra ) CALL spectra_check_parameters
780	IF ( surface_output ) CALL surface_data_output_check_parameters
781	IF ( syn_turb_gen ) CALL stg_check_parameters
782	IF ( urban_surface ) CALL usm_check_parameters
783	IF ( virtual_measurement ) CALL vm_check_parameters
784	IF ( wind_turbine ) CALL wtm_check_parameters
785
786	IF ( user_module_enabled ) CALL user_check_parameters
787
788	IF ( debug_output ) CALL debug_message( 'checking module-specific parameters', 'end' )
789
790
791	END SUBROUTINE module_interface_check_parameters
792
793
794	!------------------------------------------------------------------------------!
795	! Description:
796	! ------------
797	!> Check module-specific data output of timeseries
798	!------------------------------------------------------------------------------!
799	SUBROUTINE module_interface_check_data_output_ts( dots_max, dots_num, dots_label, dots_unit )
800
801
802	INTEGER(iwp), INTENT(IN) :: dots_max !< variable output array index
803	INTEGER(iwp), INTENT(INOUT) :: dots_num !< variable output array index
804	CHARACTER (LEN=*), DIMENSION(dots_max), INTENT(INOUT) :: dots_label
805	CHARACTER (LEN=*), DIMENSION(dots_max), INTENT(INOUT) :: dots_unit
806
807
808	IF ( debug_output ) CALL debug_message( 'checking module-specific data output ts', 'start' )
809
810	CALL dynamics_check_data_output_ts( dots_max, dots_num, dots_label, dots_unit )
811
812	IF ( radiation ) THEN
813	CALL radiation_check_data_output_ts( dots_max, dots_num )
814	ENDIF
815
816	IF ( user_module_enabled ) THEN
817	CALL user_check_data_output_ts( dots_max, dots_num, dots_label, dots_unit )
818	ENDIF
819
820	IF ( debug_output ) CALL debug_message( 'checking module-specific data output ts', 'end' )
821
822
823	END SUBROUTINE module_interface_check_data_output_ts
824
825
826	!------------------------------------------------------------------------------!
827	! Description:
828	! ------------
829	!> Check module-specific data output of profiles
830	!------------------------------------------------------------------------------!
831	SUBROUTINE module_interface_check_data_output_pr( variable, var_count, unit, &
832	dopr_unit )
833
834
835	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
836	INTEGER(iwp), INTENT(IN) :: var_count !< variable output array index
837	CHARACTER (LEN=*), INTENT(INOUT) :: unit !< physical unit of variable
838	CHARACTER (LEN=*), INTENT(OUT) :: dopr_unit !< local value of dopr_unit
839
840
841	IF ( debug_output ) CALL debug_message( 'checking module-specific data output pr', 'start' )
842
843	CALL dynamics_check_data_output_pr( variable, var_count, unit, dopr_unit )
844
845	IF ( unit == 'illegal' .AND. bulk_cloud_model ) THEN
846	CALL bcm_check_data_output_pr( variable, var_count, unit, dopr_unit )
847	ENDIF
848
849	IF ( unit == 'illegal' .AND. air_chemistry ) THEN
850	CALL chem_check_data_output_pr( variable, var_count, unit, dopr_unit )
851	ENDIF
852
853	IF ( unit == 'illegal' .AND. gust_module_enabled ) THEN
854	CALL gust_check_data_output_pr( variable, var_count, unit, dopr_unit )
855	ENDIF
856
857	IF ( unit == 'illegal' ) THEN ! ToDo: add module switch if possible
858	CALL lsm_check_data_output_pr( variable, var_count, unit, dopr_unit )
859	ENDIF
860
861	IF ( unit == 'illegal' ) THEN ! ToDo: add module switch if possible
862	CALL lsf_nudging_check_data_output_pr( variable, var_count, unit, dopr_unit )
863	ENDIF
864
865	IF ( unit == 'illegal' .AND. ocean_mode ) THEN
866	CALL ocean_check_data_output_pr( variable, var_count, unit, dopr_unit )
867	ENDIF
868
869	IF ( unit == 'illegal' .AND. radiation ) THEN
870	CALL radiation_check_data_output_pr( variable, var_count, unit, dopr_unit )
871	ENDIF
872
873	IF ( unit == 'illegal' .AND. salsa ) THEN
874	CALL salsa_check_data_output_pr( variable, var_count, unit, dopr_unit )
875	ENDIF
876
877	IF ( unit == 'illegal' .AND. user_module_enabled ) THEN
878	unit = '' ! ToDo: Seems like a hack. Find a general soultion!
879	CALL user_check_data_output_pr( variable, var_count, unit, dopr_unit )
880	ENDIF
881
882	IF ( debug_output ) CALL debug_message( 'checking module-specific data output pr', 'end' )
883
884
885	END SUBROUTINE module_interface_check_data_output_pr
886
887	!------------------------------------------------------------------------------!
888	! Description:
889	! ------------
890	!> Check module-specific 2D and 3D data output
891	!------------------------------------------------------------------------------!
892	SUBROUTINE module_interface_check_data_output( variable, unit, i, j, ilen, k )
893
894
895	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
896	CHARACTER (LEN=*), INTENT(INOUT) :: unit !< physical unit of variable
897
898	INTEGER(iwp), INTENT(IN) :: i !< ToDo: remove dummy argument, instead pass string from data_output
899	INTEGER(iwp), INTENT(IN) :: j !< average quantity? 0 = no, 1 = yes
900	INTEGER(iwp), INTENT(IN) :: ilen !< ToDo: remove dummy argument, instead pass string from data_output
901	INTEGER(iwp), INTENT(IN) :: k !< ToDo: remove dummy argument, instead pass string from data_output
902
903
904	IF ( debug_output ) CALL debug_message( 'checking module-specific data output 2d/3d', 'start' )
905
906	CALL dynamics_check_data_output( variable, unit )
907
908	CALL tcm_check_data_output( variable, unit )
909
910	IF ( unit == 'illegal' .AND. biometeorology ) THEN
911	CALL bio_check_data_output( variable, unit, i, j, ilen, k )
912	ENDIF
913
914	IF ( unit == 'illegal' .AND. bulk_cloud_model ) THEN
915	CALL bcm_check_data_output( variable, unit )
916	ENDIF
917
918	IF ( unit == 'illegal' .AND. air_chemistry &
919	.AND. (variable(1:3) == 'kc_' .OR. variable(1:3) == 'em_') ) THEN ! ToDo: remove aditional conditions
920	CALL chem_check_data_output( variable, unit, i, ilen, k )
921	ENDIF
922
923	IF ( unit == 'illegal' ) THEN
924	CALL doq_check_data_output( variable, unit, i, ilen, k )
925	ENDIF
926
927	IF ( unit == 'illegal' .AND. gust_module_enabled ) THEN
928	CALL gust_check_data_output( variable, unit )
929	ENDIF
930
931	IF ( unit == 'illegal' ) THEN ! ToDo: add module switch if possible
932	CALL lsm_check_data_output( variable, unit, i, ilen, k )
933	ENDIF
934
935	IF ( unit == 'illegal' .AND. ocean_mode ) THEN
936	CALL ocean_check_data_output( variable, unit )
937	ENDIF
938
939	IF ( unit == 'illegal' .AND. plant_canopy &
940	.AND. variable(1:4) == 'pcm_' ) THEN ! ToDo: remove aditional conditions
941	CALL pcm_check_data_output( variable, unit )
942	ENDIF
943
944	IF ( unit == 'illegal' .AND. radiation ) THEN
945	CALL radiation_check_data_output( variable, unit, i, ilen, k )
946	ENDIF
947
948	IF ( unit == 'illegal' .AND. salsa ) THEN
949	CALL salsa_check_data_output( variable, unit )
950	ENDIF
951
952	IF ( unit == 'illegal' .AND. indoor_model ) THEN
953	CALL im_check_data_output( variable, unit )
954	ENDIF
955
956	IF ( unit == 'illegal' .AND. urban_surface &
957	.AND. variable(1:4) == 'usm_' ) THEN ! ToDo: remove aditional conditions
958	CALL usm_check_data_output( variable, unit )
959	ENDIF
960
961	IF ( unit == 'illegal' .AND. user_module_enabled ) THEN
962	unit = ''
963	CALL user_check_data_output( variable, unit )
964	ENDIF
965
966	IF ( debug_output ) CALL debug_message( 'checking module-specific data output 2d/3d', 'end' )
967
968
969	END SUBROUTINE module_interface_check_data_output
970
971
972	!------------------------------------------------------------------------------!
973	!
974	! Description:
975	! ------------
976	!> Interface for init_masks. ToDo: get rid of these redundant calls!
977	!------------------------------------------------------------------------------!
978	SUBROUTINE module_interface_init_masks( variable, unit )
979
980
981	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
982	CHARACTER (LEN=*), INTENT(INOUT) :: unit !< physical unit of variable
983
984
985	IF ( debug_output ) CALL debug_message( 'initializing module-specific masks', 'start' )
986
987	CALL dynamics_init_masks( variable, unit )
988
989	IF ( unit == 'illegal' .AND. air_chemistry &
990	.AND. (variable(1:3) == 'kc_' .OR. variable(1:3) == 'em_') ) THEN ! ToDo: remove aditional conditions
991	CALL chem_check_data_output( variable, unit, 0, 0, 0 )
992	ENDIF
993
994	IF ( unit == 'illegal' ) THEN
995	CALL doq_check_data_output( variable, unit )
996	ENDIF
997
998	IF ( unit == 'illegal' .AND. radiation ) THEN
999	CALL radiation_check_data_output( variable, unit, 0, 0, 0 )
1000	ENDIF
1001
1002	IF ( unit == 'illegal' .AND. salsa ) THEN
1003	CALL salsa_check_data_output( variable, unit )
1004	ENDIF
1005
1006	IF ( unit == 'illegal' .AND. user_module_enabled ) THEN
1007	unit = ''
1008	CALL user_check_data_output( variable, unit )
1009	ENDIF
1010
1011	IF ( debug_output ) CALL debug_message( 'initializing module-specific masks', 'end' )
1012
1013
1014	END SUBROUTINE module_interface_init_masks
1015
1016
1017	!------------------------------------------------------------------------------!
1018	!
1019	! Description:
1020	! ------------
1021	!> Define appropriate grid for module-specific netcdf output variables.
1022	!------------------------------------------------------------------------------!
1023	SUBROUTINE module_interface_define_netcdf_grid( var, found, &
1024	grid_x, grid_y, grid_z )
1025
1026
1027	CHARACTER (LEN=*), INTENT(IN) :: var !< variable name
1028	LOGICAL, INTENT(OUT) :: found !< indicates if variable was found
1029	CHARACTER (LEN=*), INTENT(OUT) :: grid_x !< netcdf dimension in x-direction
1030	CHARACTER (LEN=*), INTENT(OUT) :: grid_y !< netcdf dimension in y-direction
1031	CHARACTER (LEN=*), INTENT(OUT) :: grid_z !< netcdf dimension in z-direction
1032
1033
1034	IF ( debug_output ) CALL debug_message( 'defining module-specific netcdf grids', 'start' )
1035	!
1036	!-- As long as no action is done in this subroutine, initialize strings with
1037	!-- intent(out) attribute, in order to avoid compiler warnings.
1038	found = .FALSE.
1039	grid_x = 'none'
1040	grid_y = 'none'
1041	grid_z = 'none'
1042	!
1043	!-- Use var to avoid compiler warning about unused variable
1044	IF ( var == ' ' ) RETURN
1045
1046	IF ( debug_output ) CALL debug_message( 'defining module-specific netcdf grids', 'end' )
1047
1048
1049	END SUBROUTINE module_interface_define_netcdf_grid
1050
1051
1052	!------------------------------------------------------------------------------!
1053	! Description:
1054	! ------------
1055	!> Allocate module-specific arrays and pointers
1056	!------------------------------------------------------------------------------!
1057	SUBROUTINE module_interface_init_arrays
1058
1059
1060	IF ( debug_output ) CALL debug_message( 'initializing module-specific arrays', 'start' )
1061
1062	CALL dynamics_init_arrays
1063	CALL tcm_init_arrays
1064
1065	IF ( bulk_cloud_model ) CALL bcm_init_arrays
1066	IF ( air_chemistry ) CALL chem_init_arrays
1067	IF ( gust_module_enabled ) CALL gust_init_arrays
1068	IF ( particle_advection ) CALL lpm_init_arrays
1069	IF ( land_surface ) CALL lsm_init_arrays
1070	IF ( ocean_mode ) CALL ocean_init_arrays
1071	IF ( salsa ) CALL salsa_init_arrays
1072	IF ( urban_surface ) CALL usm_init_arrays
1073	IF ( surface_output ) CALL surface_data_output_init_arrays
1074	IF ( wind_turbine ) CALL wtm_init_arrays
1075
1076	IF ( user_module_enabled ) CALL user_init_arrays
1077
1078	IF ( debug_output ) CALL debug_message( 'initializing module-specific arrays', 'end' )
1079
1080
1081	END SUBROUTINE module_interface_init_arrays
1082
1083
1084	!------------------------------------------------------------------------------!
1085	! Description:
1086	! ------------
1087	!> Perform module-specific initialization
1088	!------------------------------------------------------------------------------!
1089	SUBROUTINE module_interface_init
1090
1091
1092	IF ( debug_output ) CALL debug_message( 'module-specific initialization', 'start' )
1093
1094	CALL dynamics_init
1095	CALL tcm_init
1096
1097	IF ( biometeorology ) CALL bio_init
1098	IF ( bulk_cloud_model ) CALL bcm_init
1099	IF ( air_chemistry ) CALL chem_init
1100	IF ( virtual_flight ) CALL flight_init
1101	IF ( gust_module_enabled ) CALL gust_init
1102	IF ( indoor_model ) CALL im_init
1103	IF ( particle_advection ) CALL lpm_init
1104	IF ( large_scale_forcing ) CALL lsf_init
1105	IF ( land_surface ) CALL lsm_init
1106	IF ( nudging ) CALL nudge_init
1107	IF ( ocean_mode ) CALL ocean_init
1108	IF ( plant_canopy ) CALL pcm_init
1109	IF ( salsa ) CALL salsa_init
1110	IF ( urban_surface ) CALL usm_init
1111	IF ( virtual_measurement ) CALL vm_init
1112	IF ( wind_turbine ) CALL wtm_init
1113	IF ( radiation ) CALL radiation_init
1114
1115	CALL doq_init
1116
1117	IF ( user_module_enabled ) CALL user_init
1118
1119	IF ( debug_output ) CALL debug_message( 'module-specific initialization', 'end' )
1120
1121	END SUBROUTINE module_interface_init
1122
1123	!------------------------------------------------------------------------------!
1124	! Description:
1125	! ------------
1126	!> Initialize boundary conditions and numerical schemes.
1127	!------------------------------------------------------------------------------!
1128	SUBROUTINE module_interface_init_numerics
1129
1130	!
1131	!-- Initialize boundary conditions via surface type
1132	CALL init_bc
1133	!
1134	!-- Calculate wall flag arrays for the multigrid method.
1135	!-- Please note, wall flags are only applied in the non-optimized version.
1136	CALL poismg_noopt_init
1137
1138	END SUBROUTINE module_interface_init_numerics
1139
1140
1141	!------------------------------------------------------------------------------!
1142	! Description:
1143	! ------------
1144	!> Initialize data output
1145	!------------------------------------------------------------------------------!
1146	SUBROUTINE module_interface_init_output
1147
1148	INTEGER(iwp) :: return_value !< returned status value of called function
1149
1150	!
1151	!-- Initialize data-output module
1152	CALL dom_init( file_suffix_of_output_group=coupling_char, &
1153	mpi_comm_of_output_group=comm2d, &
1154	program_debug_output_unit=9, &
1155	debug_output=debug_output )
1156	!
1157	!-- Define module-specific output quantities
1158	IF ( virtual_measurement ) CALL vm_init_output
1159	IF ( wind_turbine ) CALL wtm_init_output
1160	!
1161	!-- Leave output-definition state
1162	return_value = dom_def_end()
1163
1164	END SUBROUTINE module_interface_init_output
1165
1166	!------------------------------------------------------------------------------!
1167	! Description:
1168	! ------------
1169	!> Perform module-specific post-initialization checks
1170	!------------------------------------------------------------------------------!
1171	SUBROUTINE module_interface_init_checks
1172
1173
1174	IF ( debug_output ) CALL debug_message( 'module-specific post-initialization checks', 'start' )
1175
1176	CALL dynamics_init_checks
1177
1178	IF ( biometeorology ) CALL bio_init_checks
1179
1180	IF ( debug_output ) CALL debug_message( 'module-specific post-initialization checks', 'end' )
1181
1182
1183	END SUBROUTINE module_interface_init_checks
1184
1185
1186	!------------------------------------------------------------------------------!
1187	! Description:
1188	! ------------
1189	!> Gather module-specific header output
1190	!------------------------------------------------------------------------------!
1191	SUBROUTINE module_interface_header( io )
1192
1193
1194	INTEGER(iwp), INTENT(IN) :: io !< unit of the output file
1195
1196
1197	IF ( debug_output ) CALL debug_message( 'module-specific header output', 'start' )
1198
1199	CALL dynamics_header( io )
1200
1201	IF ( biometeorology ) CALL bio_header ( io )
1202	IF ( bulk_cloud_model ) CALL bcm_header( io )
1203	IF ( air_chemistry ) CALL chem_header ( io )
1204	IF ( virtual_flight ) CALL flight_header( io )
1205	IF ( gust_module_enabled ) CALL gust_header( io )
1206	IF ( particle_advection ) CALL lpm_header( io )
1207	IF ( land_surface ) CALL lsm_header( io )
1208	IF ( large_scale_forcing ) CALL lsf_nudging_header( io )
1209	IF ( nesting_offline ) CALL nesting_offl_header( io )
1210	IF ( ocean_mode ) CALL ocean_header( io )
1211	IF ( plant_canopy ) CALL pcm_header( io )
1212	IF ( radiation ) CALL radiation_header( io )
1213	IF ( salsa ) CALL salsa_header( io )
1214	IF ( calculate_spectra ) CALL spectra_header( io )
1215	IF ( syn_turb_gen ) CALL stg_header( io )
1216
1217	IF ( user_module_enabled ) CALL user_header( io )
1218
1219	IF ( debug_output ) CALL debug_message( 'module-specific header output', 'end' )
1220
1221
1222	END SUBROUTINE module_interface_header
1223
1224
1225	!------------------------------------------------------------------------------!
1226	! Description:
1227	! ------------
1228	!> Perform module-specific actions while in time-integration (vector-optimized)
1229	!------------------------------------------------------------------------------!
1230	SUBROUTINE module_interface_actions( location )
1231
1232
1233	CHARACTER (LEN=*), INTENT(IN) :: location !< call location string
1234
1235	CALL dynamics_actions( location )
1236	CALL tcm_actions( location )
1237
1238	IF ( bulk_cloud_model ) CALL bcm_actions( location )
1239	IF ( air_chemistry ) CALL chem_actions( location )
1240	IF ( gust_module_enabled ) CALL gust_actions( location )
1241	IF ( particle_advection ) CALL lpm_actions( location )
1242	IF ( ocean_mode ) CALL ocean_actions( location )
1243	IF ( salsa ) CALL salsa_actions( location )
1244	IF ( wind_turbine ) CALL wtm_actions( location )
1245
1246	IF ( user_module_enabled ) CALL user_actions( location )
1247	IF ( vdi_checks ) CALL vdi_actions( location )
1248
1249
1250	END SUBROUTINE module_interface_actions
1251
1252
1253	!------------------------------------------------------------------------------!
1254	! Description:
1255	! ------------
1256	!> Perform module-specific actions while in time-integration (cache-optimized)
1257	!------------------------------------------------------------------------------!
1258	SUBROUTINE module_interface_actions_ij( i, j, location )
1259
1260
1261	INTEGER(iwp), INTENT(IN) :: i !< grid index in x-direction
1262	INTEGER(iwp), INTENT(IN) :: j !< grid index in y-direction
1263	CHARACTER (LEN=*), INTENT(IN) :: location !< call location string
1264
1265	CALL dynamics_actions( i, j, location )
1266	CALL tcm_actions( i, j, location )
1267
1268	IF ( bulk_cloud_model ) CALL bcm_actions( i, j, location )
1269	IF ( air_chemistry ) CALL chem_actions( i, j, location )
1270	IF ( gust_module_enabled ) CALL gust_actions( i, j, location )
1271	IF ( ocean_mode ) CALL ocean_actions( i, j, location )
1272	IF ( salsa ) CALL salsa_actions( i, j, location )
1273	IF ( wind_turbine ) CALL wtm_actions( i, j, location )
1274
1275	IF ( user_module_enabled ) CALL user_actions( i, j, location )
1276
1277
1278	END SUBROUTINE module_interface_actions_ij
1279
1280
1281	!------------------------------------------------------------------------------!
1282	! Description:
1283	! ------------
1284	!> Compute module-specific non_advective_processes (vector-optimized)
1285	!------------------------------------------------------------------------------!
1286	SUBROUTINE module_interface_non_advective_processes
1287
1288
1289	CALL dynamics_non_advective_processes
1290
1291	IF ( bulk_cloud_model ) CALL bcm_non_advective_processes
1292	IF ( air_chemistry ) CALL chem_non_advective_processes
1293	IF ( salsa ) CALL salsa_non_advective_processes
1294
1295
1296	END SUBROUTINE module_interface_non_advective_processes
1297
1298
1299	!------------------------------------------------------------------------------!
1300	! Description:
1301	! ------------
1302	!> Compute module-specific non_advective_processes (cache-optimized)
1303	!------------------------------------------------------------------------------!
1304	SUBROUTINE module_interface_non_advective_processes_ij( i, j )
1305
1306
1307	INTEGER(iwp), INTENT(IN) :: i !< grid index in x-direction
1308	INTEGER(iwp), INTENT(IN) :: j !< grid index in y-direction
1309
1310	CALL dynamics_non_advective_processes( i, j )
1311
1312	IF ( bulk_cloud_model ) CALL bcm_non_advective_processes( i, j )
1313	IF ( air_chemistry ) CALL chem_non_advective_processes( i, j )
1314	IF ( salsa ) CALL salsa_non_advective_processes( i, j )
1315
1316
1317	END SUBROUTINE module_interface_non_advective_processes_ij
1318
1319	!------------------------------------------------------------------------------!
1320	! Description:
1321	! ------------
1322	!> Exchange horiz for module-specific quantities
1323	!------------------------------------------------------------------------------!
1324	SUBROUTINE module_interface_exchange_horiz
1325
1326
1327	IF ( debug_output_timestep ) CALL debug_message( 'module-specific exchange_horiz', 'start' )
1328
1329	CALL dynamics_exchange_horiz
1330
1331	IF ( bulk_cloud_model ) CALL bcm_exchange_horiz
1332	IF ( air_chemistry ) CALL chem_exchange_horiz_bounds
1333	IF ( salsa ) CALL salsa_exchange_horiz_bounds
1334
1335	IF ( debug_output_timestep ) CALL debug_message( 'module-specific exchange_horiz', 'end' )
1336
1337
1338	END SUBROUTINE module_interface_exchange_horiz
1339
1340
1341	!------------------------------------------------------------------------------!
1342	! Description:
1343	! ------------
1344	!> Compute module-specific prognostic_equations (vector-optimized)
1345	!------------------------------------------------------------------------------!
1346	SUBROUTINE module_interface_prognostic_equations
1347
1348
1349	CALL dynamics_prognostic_equations
1350	CALL tcm_prognostic_equations
1351
1352	IF ( bulk_cloud_model ) CALL bcm_prognostic_equations
1353	IF ( air_chemistry ) CALL chem_prognostic_equations
1354	IF ( gust_module_enabled ) CALL gust_prognostic_equations
1355	IF ( ocean_mode ) CALL ocean_prognostic_equations
1356	IF ( salsa ) CALL salsa_prognostic_equations
1357
1358
1359	END SUBROUTINE module_interface_prognostic_equations
1360
1361
1362	!------------------------------------------------------------------------------!
1363	! Description:
1364	! ------------
1365	!> Compute module-specific prognostic_equations (cache-optimized)
1366	!------------------------------------------------------------------------------!
1367	SUBROUTINE module_interface_prognostic_equations_ij( i, j, i_omp_start, tn )
1368
1369
1370	INTEGER(iwp), INTENT(IN) :: i !< grid index in x-direction
1371	INTEGER(iwp), INTENT(IN) :: j !< grid index in y-direction
1372	INTEGER(iwp), INTENT(IN) :: i_omp_start !< first loop index of i-loop in prognostic_equations
1373	INTEGER(iwp), INTENT(IN) :: tn !< task number of openmp task
1374
1375	CALL dynamics_prognostic_equations( i, j, i_omp_start, tn )
1376	CALL tcm_prognostic_equations( i, j, i_omp_start, tn )
1377
1378	IF ( bulk_cloud_model ) CALL bcm_prognostic_equations( i, j, i_omp_start, tn )
1379	IF ( air_chemistry ) CALL chem_prognostic_equations( i, j, i_omp_start, tn )
1380	IF ( gust_module_enabled ) CALL gust_prognostic_equations( i, j, i_omp_start, tn )
1381	IF ( ocean_mode ) CALL ocean_prognostic_equations( i, j, i_omp_start, tn )
1382	IF ( salsa ) CALL salsa_prognostic_equations( i, j, i_omp_start, tn )
1383
1384
1385	END SUBROUTINE module_interface_prognostic_equations_ij
1386
1387	!------------------------------------------------------------------------------!
1388	! Description:
1389	! ------------
1390	!> Compute module-specific boundary conditions
1391	!------------------------------------------------------------------------------!
1392	SUBROUTINE module_interface_boundary_conditions
1393
1394
1395	IF ( debug_output_timestep ) CALL debug_message( 'module-specific boundary_conditions', 'start' )
1396
1397	CALL dynamics_boundary_conditions
1398	CALL tcm_boundary_conds
1399
1400	IF ( bulk_cloud_model ) CALL bcm_boundary_conditions
1401	IF ( air_chemistry ) CALL chem_boundary_conditions
1402	IF ( ocean_mode ) CALL ocean_boundary_conditions
1403	IF ( salsa ) CALL salsa_boundary_conditions
1404
1405	IF ( debug_output_timestep ) CALL debug_message( 'module-specific boundary_conditions', 'end' )
1406
1407
1408	END SUBROUTINE module_interface_boundary_conditions
1409
1410	!------------------------------------------------------------------------------!
1411	! Description:
1412	! ------------
1413	!> Swap the timelevel pointers for module-specific arrays
1414	!------------------------------------------------------------------------------!
1415	SUBROUTINE module_interface_swap_timelevel ( swap_mode )
1416
1417
1418	INTEGER(iwp), INTENT(IN) :: swap_mode !< determines procedure of pointer swap
1419
1420
1421	IF ( debug_output_timestep ) CALL debug_message( 'module-specific swap timelevel', 'start' )
1422
1423	CALL dynamics_swap_timelevel( swap_mode )
1424	CALL tcm_swap_timelevel( swap_mode )
1425
1426	IF ( bulk_cloud_model ) CALL bcm_swap_timelevel( swap_mode )
1427	IF ( air_chemistry ) CALL chem_swap_timelevel( swap_mode )
1428	IF ( gust_module_enabled ) CALL gust_swap_timelevel( swap_mode )
1429	IF ( land_surface ) CALL lsm_swap_timelevel( swap_mode )
1430	IF ( ocean_mode ) CALL ocean_swap_timelevel( swap_mode )
1431	IF ( salsa ) CALL salsa_swap_timelevel( swap_mode )
1432	IF ( urban_surface ) CALL usm_swap_timelevel( swap_mode )
1433
1434	IF ( debug_output_timestep ) CALL debug_message( 'module-specific swap timelevel', 'end' )
1435
1436
1437	END SUBROUTINE module_interface_swap_timelevel
1438
1439
1440	!------------------------------------------------------------------------------!
1441	!
1442	! Description:
1443	! ------------
1444	!> Perform module-specific averaging of 3D data
1445	!------------------------------------------------------------------------------!
1446	SUBROUTINE module_interface_3d_data_averaging( mode, variable )
1447
1448
1449	CHARACTER (LEN=*), INTENT(IN) :: mode !< averaging interface mode
1450	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
1451
1452
1453	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 3d data averaging', 'start' )
1454
1455	CALL dynamics_3d_data_averaging( mode, variable )
1456	CALL tcm_3d_data_averaging( mode, variable )
1457
1458	IF ( biometeorology ) CALL bio_3d_data_averaging( mode, variable )
1459	IF ( bulk_cloud_model ) CALL bcm_3d_data_averaging( mode, variable )
1460	IF ( air_chemistry ) CALL chem_3d_data_averaging( mode, variable )
1461	CALL doq_3d_data_averaging( mode, variable ) ! ToDo: this seems to be not according to the design
1462	IF ( gust_module_enabled ) CALL gust_3d_data_averaging( mode, variable )
1463	IF ( land_surface ) CALL lsm_3d_data_averaging( mode, variable )
1464	IF ( ocean_mode ) CALL ocean_3d_data_averaging( mode, variable )
1465	IF ( plant_canopy ) CALL pcm_3d_data_averaging( mode, variable )
1466	IF ( radiation ) CALL radiation_3d_data_averaging( mode, variable )
1467	IF ( salsa ) CALL salsa_3d_data_averaging( mode, variable )
1468	IF ( urban_surface ) CALL usm_3d_data_averaging( mode, variable )
1469
1470	IF ( user_module_enabled ) CALL user_3d_data_averaging( mode, variable )
1471
1472	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 3d data averaging', 'end' )
1473
1474
1475	END SUBROUTINE module_interface_3d_data_averaging
1476
1477	!------------------------------------------------------------------------------!
1478	!
1479	! Description:
1480	! ------------
1481	!> Define module-specific 2D output variables
1482	!------------------------------------------------------------------------------!
1483	SUBROUTINE module_interface_data_output_2d( av, variable, found, grid, mode, &
1484	local_pf, two_d, nzb_do, nzt_do, &
1485	fill_value )
1486
1487	INTEGER(iwp), INTENT(IN) :: av !< flag for (non-)average output
1488	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
1489	LOGICAL, INTENT(INOUT) :: found !< flag if output variable is found
1490	CHARACTER (LEN=*), INTENT(INOUT) :: grid !< name of vertical grid
1491	CHARACTER (LEN=*), INTENT(IN) :: mode !< either 'xy', 'xz' or 'yz'
1492	LOGICAL, INTENT(OUT) :: two_d !< flag for 2D variables
1493	INTEGER(iwp), INTENT(IN) :: nzb_do !< vertical output index (bottom) (usually 0)
1494	INTEGER(iwp), INTENT(IN) :: nzt_do !< vertical output index (top) (usually nz_do3d)
1495	REAL(wp), INTENT(IN) :: fill_value !< to be removed
1496
1497	REAL(wp), DIMENSION(nxl:nxr,nys:nyn,nzb_do:nzt_do), INTENT(INOUT) :: local_pf !< ToDo: can also be kind=sp
1498
1499
1500	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 2d data output', 'start' )
1501
1502	CALL dynamics_data_output_2d( &
1503	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do, fill_value &
1504	)
1505
1506	IF ( .NOT. found ) THEN
1507	CALL tcm_data_output_2d( &
1508	av, variable, found, grid, mode, local_pf, nzb_do, nzt_do &
1509	)
1510	ENDIF
1511
1512	IF ( .NOT. found .AND. biometeorology ) THEN
1513	CALL bio_data_output_2d( &
1514	av, variable, found, grid, local_pf, two_d, nzb_do, nzt_do &
1515	)
1516	ENDIF
1517
1518	IF ( .NOT. found .AND. bulk_cloud_model ) THEN
1519	CALL bcm_data_output_2d( &
1520	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do&
1521	)
1522	ENDIF
1523
1524	IF ( .NOT. found .AND. air_chemistry ) THEN
1525	CALL chem_data_output_2d( &
1526	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do, fill_value &
1527	)
1528	ENDIF
1529
1530	IF ( .NOT. found ) THEN
1531	CALL doq_output_2d( &
1532	av, variable, found, grid, mode, local_pf, two_d, &
1533	nzb_do, nzt_do, fill_value )
1534	ENDIF
1535
1536	IF ( .NOT. found .AND. gust_module_enabled ) THEN
1537	CALL gust_data_output_2d( &
1538	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do, fill_value &
1539	)
1540	ENDIF
1541
1542	IF ( .NOT. found .AND. land_surface ) THEN
1543	CALL lsm_data_output_2d( &
1544	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do&
1545	)
1546	ENDIF
1547
1548	IF ( .NOT. found .AND. ocean_mode ) THEN
1549	CALL ocean_data_output_2d( &
1550	av, variable, found, grid, mode, local_pf, nzb_do, nzt_do &
1551	)
1552	ENDIF
1553
1554	IF ( .NOT. found .AND. radiation ) THEN
1555	CALL radiation_data_output_2d( &
1556	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do&
1557	)
1558	ENDIF
1559
1560	IF ( .NOT. found .AND. salsa ) THEN
1561	CALL salsa_data_output_2d( &
1562	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do&
1563	)
1564	ENDIF
1565
1566	IF ( .NOT. found .AND. user_module_enabled ) THEN
1567	CALL user_data_output_2d( &
1568	av, variable, found, grid, local_pf, two_d, nzb_do, nzt_do &
1569	)
1570	ENDIF
1571
1572	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 2d data output', 'end' )
1573
1574
1575	END SUBROUTINE module_interface_data_output_2d
1576
1577
1578	!------------------------------------------------------------------------------!
1579	!
1580	! Description:
1581	! ------------
1582	!> Define module-specific 3D output variables
1583	!------------------------------------------------------------------------------!
1584	SUBROUTINE module_interface_data_output_3d( av, variable, found, local_pf, &
1585	fill_value, resorted, nzb_do, nzt_do )
1586
1587
1588	INTEGER(iwp), INTENT(IN) :: av !< flag for (non-)average output
1589	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
1590	LOGICAL, INTENT(INOUT) :: found !< flag if output variable is found
1591	REAL(wp), INTENT(IN) :: fill_value !< ToDo: refactor
1592	LOGICAL, INTENT(OUT) :: resorted !< flag if output has been resorted
1593	INTEGER(iwp), INTENT(IN) :: nzb_do !< vertical output index (bottom) (usually 0)
1594	INTEGER(iwp), INTENT(IN) :: nzt_do !< vertical output index (top) (usually nz_do3d)
1595
1596	REAL(sp), DIMENSION(nxl:nxr,nys:nyn,nzb_do:nzt_do), INTENT(INOUT) :: local_pf
1597
1598
1599	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 3d data output', 'start' )
1600
1601	CALL dynamics_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1602	resorted = .FALSE.
1603
1604	IF ( .NOT. found ) THEN
1605	CALL tcm_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1606	resorted = .TRUE.
1607	ENDIF
1608
1609	IF ( .NOT. found .AND. biometeorology ) THEN
1610	CALL bio_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1611	resorted = .FALSE.
1612	ENDIF
1613
1614	IF ( .NOT. found .AND. bulk_cloud_model ) THEN
1615	CALL bcm_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1616	resorted = .TRUE.
1617	ENDIF
1618
1619	IF ( .NOT. found .AND. air_chemistry ) THEN
1620	CALL chem_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1621	resorted = .TRUE.
1622	ENDIF
1623
1624	IF ( .NOT. found ) THEN
1625	CALL doq_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1626	resorted = .TRUE.
1627	ENDIF
1628
1629	IF ( .NOT. found .AND. gust_module_enabled ) THEN
1630	CALL gust_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1631	resorted = .TRUE.
1632	ENDIF
1633
1634	IF ( .NOT. found .AND. indoor_model ) THEN
1635	CALL im_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1636	resorted = .TRUE.
1637	ENDIF
1638
1639	IF ( .NOT. found .AND. ocean_mode ) THEN
1640	CALL ocean_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1641	resorted = .TRUE.
1642	ENDIF
1643
1644	IF ( .NOT. found .AND. plant_canopy ) THEN
1645	CALL pcm_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1646	resorted = .TRUE.
1647	ENDIF
1648
1649	IF ( .NOT. found .AND. radiation ) THEN
1650	CALL radiation_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1651	resorted = .TRUE.
1652	ENDIF
1653
1654	IF ( .NOT. found .AND. salsa ) THEN
1655	CALL salsa_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1656	resorted = .TRUE.
1657	ENDIF
1658
1659	IF ( .NOT. found .AND. user_module_enabled ) THEN
1660	CALL user_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1661	resorted = .TRUE.
1662	ENDIF
1663
1664	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 3d data output', 'end' )
1665
1666
1667	END SUBROUTINE module_interface_data_output_3d
1668
1669
1670	!------------------------------------------------------------------------------!
1671	! Description:
1672	! ------------
1673	!> Compute module-specific profile and timeseries data
1674	!------------------------------------------------------------------------------!
1675	SUBROUTINE module_interface_statistics( mode, sr, tn, dots_max )
1676
1677
1678	CHARACTER (LEN=*), INTENT(IN) :: mode !< statistical analysis mode
1679	INTEGER(iwp), INTENT(IN) :: sr !<
1680	INTEGER(iwp), INTENT(IN) :: tn !<
1681	INTEGER(iwp), INTENT(IN) :: dots_max !< maximum number of timeseries
1682
1683
1684	IF ( debug_output_timestep ) CALL debug_message( 'module-specific statistics', 'start' )
1685
1686	CALL dynamics_statistics( mode, sr, tn )
1687
1688	IF ( gust_module_enabled ) CALL gust_statistics( mode, sr, tn, dots_max )
1689	IF ( air_chemistry ) CALL chem_statistics( mode, sr, tn )
1690	IF ( salsa ) CALL salsa_statistics( mode, sr, tn )
1691
1692	IF ( user_module_enabled ) CALL user_statistics( mode, sr, tn )
1693
1694	IF ( debug_output_timestep ) CALL debug_message( 'module-specific statistics', 'end' )
1695
1696
1697	END SUBROUTINE module_interface_statistics
1698
1699
1700	!------------------------------------------------------------------------------!
1701	! Description:
1702	! ------------
1703	!> Read module-specific restart data globaly shared by all MPI ranks
1704	!------------------------------------------------------------------------------!
1705	SUBROUTINE module_interface_rrd_global( found )
1706
1707
1708	LOGICAL, INTENT(INOUT) :: found !< flag if variable was found
1709
1710
1711	IF ( debug_output ) CALL debug_message( 'module-specific read global restart data', 'start' )
1712
1713	CALL dynamics_rrd_global( found ) ! ToDo: change interface to pass variable
1714
1715	IF ( .NOT. found ) CALL bio_rrd_global( found ) ! ToDo: change interface to pass variable
1716	IF ( .NOT. found ) CALL bcm_rrd_global( found ) ! ToDo: change interface to pass variable
1717	IF ( .NOT. found ) CALL flight_rrd_global( found ) ! ToDo: change interface to pass variable
1718	IF ( .NOT. found ) CALL gust_rrd_global( found ) ! ToDo: change interface to pass variable
1719	IF ( .NOT. found ) CALL lpm_rrd_global( found ) ! ToDo: change interface to pass variable
1720	IF ( .NOT. found ) CALL ocean_rrd_global( found ) ! ToDo: change interface to pass variable
1721	IF ( .NOT. found ) CALL stg_rrd_global ( found ) ! ToDo: change interface to pass variable
1722	IF ( .NOT. found ) CALL wtm_rrd_global( found ) ! ToDo: change interface to pass variable
1723	IF ( .NOT. found ) CALL surface_data_output_rrd_global( found )
1724
1725	IF ( .NOT. found ) CALL user_rrd_global( found ) ! ToDo: change interface to pass variable
1726
1727	IF ( debug_output ) CALL debug_message( 'module-specific read global restart data', 'end' )
1728
1729
1730	END SUBROUTINE module_interface_rrd_global
1731
1732
1733	!------------------------------------------------------------------------------!
1734	! Description:
1735	! ------------
1736	!> Write module-specific restart data globaly shared by all MPI ranks
1737	!------------------------------------------------------------------------------!
1738	SUBROUTINE module_interface_wrd_global
1739
1740
1741	IF ( debug_output ) CALL debug_message( 'module-specific write global restart data', 'start' )
1742
1743	CALL dynamics_wrd_global
1744
1745	IF ( biometeorology ) CALL bio_wrd_global
1746	IF ( bulk_cloud_model ) CALL bcm_wrd_global
1747	IF ( virtual_flight ) CALL flight_wrd_global
1748	IF ( gust_module_enabled ) CALL gust_wrd_global
1749	IF ( ocean_mode ) CALL ocean_wrd_global
1750	IF ( syn_turb_gen ) CALL stg_wrd_global
1751	IF ( wind_turbine ) CALL wtm_wrd_global
1752	IF ( surface_output ) CALL surface_data_output_wrd_global
1753
1754	IF ( user_module_enabled ) CALL user_wrd_global
1755
1756	IF ( debug_output ) CALL debug_message( 'module-specific write global restart data', 'end' )
1757
1758
1759	END SUBROUTINE module_interface_wrd_global
1760
1761
1762	!------------------------------------------------------------------------------!
1763	! Description:
1764	! ------------
1765	!> Read module-specific restart data specific to local MPI ranks
1766	!------------------------------------------------------------------------------!
1767	SUBROUTINE module_interface_rrd_local( map_index, &
1768	nxlf, nxlc, nxl_on_file, &
1769	nxrf, nxrc, nxr_on_file, &
1770	nynf, nync, nyn_on_file, &
1771	nysf, nysc, nys_on_file, &
1772	tmp_2d, tmp_3d, found )
1773
1774
1775	INTEGER(iwp), INTENT(IN) :: map_index !<
1776	INTEGER(iwp), INTENT(IN) :: nxlc !<
1777	INTEGER(iwp), INTENT(IN) :: nxlf !<
1778	INTEGER(iwp), INTENT(IN) :: nxl_on_file !<
1779	INTEGER(iwp), INTENT(IN) :: nxrc !<
1780	INTEGER(iwp), INTENT(IN) :: nxrf !<
1781	INTEGER(iwp), INTENT(IN) :: nxr_on_file !<
1782	INTEGER(iwp), INTENT(IN) :: nync !<
1783	INTEGER(iwp), INTENT(IN) :: nynf !<
1784	INTEGER(iwp), INTENT(IN) :: nyn_on_file !<
1785	INTEGER(iwp), INTENT(IN) :: nysc !<
1786	INTEGER(iwp), INTENT(IN) :: nysf !<
1787	INTEGER(iwp), INTENT(IN) :: nys_on_file !<
1788	LOGICAL, INTENT(INOUT) :: found !< flag if variable was found
1789
1790	REAL(wp), &
1791	DIMENSION(nys_on_file-nbgp:nyn_on_file+nbgp,nxl_on_file-nbgp:nxr_on_file+nbgp), &
1792	INTENT(OUT) :: tmp_2d !<
1793	REAL(wp), &
1794	DIMENSION(nzb:nzt+1,nys_on_file-nbgp:nyn_on_file+nbgp,nxl_on_file-nbgp:nxr_on_file+nbgp), &
1795	INTENT(OUT) :: tmp_3d !<
1796
1797
1798	IF ( debug_output ) CALL debug_message( 'module-specific read local restart data', 'start' )
1799
1800	CALL dynamics_rrd_local( &
1801	map_index, &
1802	nxlf, nxlc, nxl_on_file, &
1803	nxrf, nxrc, nxr_on_file, &
1804	nynf, nync, nyn_on_file, &
1805	nysf, nysc, nys_on_file, &
1806	tmp_2d, tmp_3d, found &
1807	) ! ToDo: change interface to pass variable
1808
1809	IF ( .NOT. found ) CALL bio_rrd_local( &
1810	found &
1811	)
1812
1813	IF ( .NOT. found ) CALL bcm_rrd_local( &
1814	map_index, &
1815	nxlf, nxlc, nxl_on_file, &
1816	nxrf, nxrc, nxr_on_file, &
1817	nynf, nync, nyn_on_file, &
1818	nysf, nysc, nys_on_file, &
1819	tmp_2d, tmp_3d, found &
1820	) ! ToDo: change interface to pass variable
1821
1822	IF ( .NOT. found ) CALL chem_rrd_local( &
1823	map_index, &
1824	nxlf, nxlc, nxl_on_file, &
1825	nxrf, nxrc, nxr_on_file, &
1826	nynf, nync, nyn_on_file, &
1827	nysf, nysc, nys_on_file, &
1828	tmp_3d, found &
1829	) ! ToDo: change interface to pass variable
1830
1831	! IF ( .NOT. found ) CALL doq_rrd_local( &
1832	! map_index, &
1833	! nxlf, nxlc, nxl_on_file, &
1834	! nxrf, nxrc, nxr_on_file, &
1835	! nynf, nync, nyn_on_file, &
1836	! nysf, nysc, nys_on_file, &
1837	! tmp_3d_non_standard, found &
1838	! ) ! ToDo: change interface to pass variable CALL doq_wrd_local
1839
1840	IF ( .NOT. found ) CALL gust_rrd_local( &
1841	map_index, &
1842	nxlf, nxlc, nxl_on_file, &
1843	nxrf, nxrc, nxr_on_file, &
1844	nynf, nync, nyn_on_file, &
1845	nysf, nysc, nys_on_file, &
1846	tmp_2d, tmp_3d, found &
1847	) ! ToDo: change interface to pass variable
1848
1849	IF ( .NOT. found ) CALL lpm_rrd_local( &
1850	map_index, &
1851	nxlf, nxlc, nxl_on_file, &
1852	nxrf, nxrc, nxr_on_file, &
1853	nynf, nync, nyn_on_file, &
1854	nysf, nysc, nys_on_file, &
1855	tmp_3d, found &
1856	) ! ToDo: change interface to pass variable
1857
1858	IF ( .NOT. found ) CALL lsm_rrd_local( &
1859	map_index, &
1860	nxlf, nxlc, nxl_on_file, &
1861	nxrf, nxrc, nxr_on_file, &
1862	nynf, nync, nyn_on_file, &
1863	nysf, nysc, nys_on_file, &
1864	tmp_2d, found &
1865	) ! ToDo: change interface to pass variable
1866
1867	IF ( .NOT. found ) CALL pcm_rrd_local( &
1868	map_index, &
1869	nxlf, nxlc, nxl_on_file, &
1870	nxrf, nxrc, nxr_on_file, &
1871	nynf, nync, nyn_on_file, &
1872	nysf, nysc, nys_on_file, &
1873	found &
1874	)
1875
1876	IF ( .NOT. found ) CALL ocean_rrd_local( &
1877	map_index, &
1878	nxlf, nxlc, nxl_on_file, &
1879	nxrf, nxrc, nxr_on_file, &
1880	nynf, nync, nyn_on_file, &
1881	nysf, nysc, nys_on_file, &
1882	tmp_3d, found &
1883	) ! ToDo: change interface to pass variable
1884
1885	IF ( .NOT. found ) CALL radiation_rrd_local( &
1886	map_index, &
1887	nxlf, nxlc, nxl_on_file, &
1888	nxrf, nxrc, nxr_on_file, &
1889	nynf, nync, nyn_on_file, &
1890	nysf, nysc, nys_on_file, &
1891	tmp_2d, tmp_3d, found &
1892	) ! ToDo: change interface to pass variable
1893
1894	IF ( .NOT. found ) CALL salsa_rrd_local( &
1895	map_index, &
1896	nxlf, nxlc, nxl_on_file, &
1897	nxrf, nxrc, nxr_on_file, &
1898	nynf, nync, nyn_on_file, &
1899	nysf, nysc, nys_on_file, &
1900	tmp_3d, found &
1901	) ! ToDo: change interface to pass variable
1902
1903	IF ( .NOT. found ) CALL usm_rrd_local( &
1904	map_index, &
1905	nxlf, nxlc, nxl_on_file, &
1906	nxrf, nxr_on_file, &
1907	nynf, nyn_on_file, &
1908	nysf, nysc, nys_on_file, &
1909	found &
1910	) ! ToDo: change interface to pass variable
1911	!
1912	!-- Surface data do not need overlap data, so do not pass these information.
1913	IF ( .NOT. found ) CALL surface_data_output_rrd_local( found )
1914
1915	IF ( .NOT. found ) CALL user_rrd_local( &
1916	map_index, &
1917	nxlf, nxlc, nxl_on_file, &
1918	nxrf, nxrc, nxr_on_file, &
1919	nynf, nync, nyn_on_file, &
1920	nysf, nysc, nys_on_file, &
1921	tmp_3d, found &
1922	) ! ToDo: change interface to pass variable
1923
1924	IF ( debug_output ) CALL debug_message( 'module-specific read local restart data', 'end' )
1925
1926
1927	END SUBROUTINE module_interface_rrd_local
1928
1929
1930	!------------------------------------------------------------------------------!
1931	! Description:
1932	! ------------
1933	!> Write module-specific restart data specific to local MPI ranks
1934	!------------------------------------------------------------------------------!
1935	SUBROUTINE module_interface_wrd_local
1936
1937
1938	IF ( debug_output ) CALL debug_message( 'module-specific write local restart data', 'start' )
1939
1940	CALL dynamics_wrd_local
1941
1942	IF ( biometeorology ) CALL bio_wrd_local
1943	IF ( bulk_cloud_model ) CALL bcm_wrd_local
1944	IF ( air_chemistry ) CALL chem_wrd_local
1945	CALL doq_wrd_local
1946	IF ( gust_module_enabled ) CALL gust_wrd_local
1947	IF ( particle_advection ) CALL lpm_wrd_local
1948	IF ( land_surface ) CALL lsm_wrd_local
1949	IF ( plant_canopy ) CALL pcm_wrd_local
1950	IF ( ocean_mode ) CALL ocean_wrd_local
1951	IF ( radiation ) CALL radiation_wrd_local
1952	IF ( salsa ) CALL salsa_wrd_local
1953	IF ( urban_surface ) CALL usm_wrd_local
1954	IF ( surface_output ) CALL surface_data_output_wrd_local
1955
1956	IF ( user_module_enabled ) CALL user_wrd_local
1957
1958	IF ( debug_output ) CALL debug_message( 'module-specific write local restart data', 'end' )
1959
1960
1961	END SUBROUTINE module_interface_wrd_local
1962
1963
1964	!------------------------------------------------------------------------------!
1965	! Description:
1966	! ------------
1967	!> Perform module-specific last actions before the program terminates
1968	!------------------------------------------------------------------------------!
1969	SUBROUTINE module_interface_last_actions
1970
1971	INTEGER :: return_value !< returned status value of a called function
1972
1973
1974	IF ( debug_output ) CALL debug_message( 'module-specific last actions', 'start' )
1975
1976	return_value = dom_finalize_output()
1977
1978	CALL dynamics_last_actions
1979
1980	IF ( user_module_enabled ) CALL user_last_actions
1981
1982	IF ( debug_output ) CALL debug_message( 'module-specific last actions', 'end' )
1983
1984
1985	END SUBROUTINE module_interface_last_actions
1986
1987
1988	END MODULE module_interface

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |