Home

Context Navigation

source: palm/trunk/SOURCE/module_interface.f90 @ 4410

Last change on this file since 4410 was 4407, checked in by knoop, 5 years ago
Changed program_debug_output_unit to 9 in dom_init call
Property svn:keywords set to `Id`
File size: 87.2 KB

Line
1	!> @file module_interface.f90
2	!------------------------------------------------------------------------------!
3	! This file is part of PALM.
4	!
5	! PALM is free software: you can redistribute it and/or modify it under the
6	! terms of the GNU General Public License as published by the Free Software
7	! Foundation, either version 3 of the License, or (at your option) any later
8	! version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2020 Leibniz Universitaet Hannover
18	!------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: module_interface.f90 4407 2020-02-13 20:31:44Z Giersch $
27	! Changed program_debug_output_unit to 9 in dom_init call
28	!
29	! 4400 2020-02-10 20:32:41Z suehring
30	! - Use data-output module for virtual measurement output
31	! - Remove deprecated routines for virtual measurement module
32	!
33	! 4361 2020-01-07 12:22:38Z suehring
34	! Remove unused arrays in pmc_rrd_local
35	!
36	! 4360 2020-01-07 11:25:50Z suehring
37	! Add pcm_rrd_local and pcm_wrd_local
38	!
39	! 4331 2019-12-10 18:25:02Z suehring
40	! Change interface for doq_check_data_output, in order to perform further
41	! output checks.
42	!
43	! 4281 2019-10-29 15:15:39Z schwenkel
44	! Added dynamics boundary conditions
45	!
46	! 4272 2019-10-23 15:18:57Z schwenkel
47	! Further modularization of boundary conditions: moved boundary conditions to
48	! respective modules
49	!
50	! 4268 2019-10-17 11:29:38Z schwenkel
51	! Introduction of module_interface_boundary_conditions
52	!
53	! 4182 2019-08-22 15:20:23Z scharf
54	! Corrected "Former revisions" section
55	!
56	! 4173 2019-08-20 12:04:06Z gronemeier
57	! add vdi_internal_controls
58	!
59	! 4157 2019-08-14 09:19:12Z suehring
60	! Call doq_init from module interface
61	!
62	! 4132 2019-08-02 12:34:17Z suehring
63	! Bugfix in masked data output for diagnostic quantities
64	!
65	! 4131 2019-08-02 11:06:18Z monakurppa
66	! Add output of 3D plant-canopy outputs (merge from branch resler)
67	!
68	! 4048 2019-06-21 21:00:21Z knoop
69	! Moved turbulence_closure_mod calls into this module_interface
70	!
71	! 4047 2019-06-21 18:58:09Z knoop
72	! Introduction of the dynamics module
73	!
74	! 4039 2019-06-18 10:32:41Z suehring
75	! Introduce diagnostic output
76	!
77	! 4028 2019-06-13 12:21:37Z schwenkel
78	! Further modularization of particle code components
79	!
80	! 4017 2019-06-06 12:16:46Z schwenkel
81	! local_pf need INTENT(INOUT) attribute rather than INTENT(OUT). This is
82	! because INTENT(OUT) sets the array to not-defined. Especially for outputs that
83	! are not defined everywhere, e.g. land-surface outputs, this will be
84	! problematic as NaN will be output.
85	!
86	! 3987 2019-05-22 09:52:13Z kanani
87	! Introduce switchable DEBUG file output via debug_message routine
88	!
89	! 3956 2019-05-07 12:32:52Z monakurppa
90	! - Added calls for salsa_non_advective_processes and
91	! salsa_exchange_horiz_bounds
92	! - Moved the call for salsa_data_output_2d/3d before that of
93	! radiation_data_output_2d/3d. radiation_data_output_2d/3d tries to read a
94	! salsa output variable and encounters a segmentation fault for "Ntot" due
95	! to the shortoutput name
96	!
97	! 3931 2019-04-24 16:34:28Z schwenkel
98	! Changed non_transport_physics to non_advective_processes
99	!
100	! 3930 2019-04-24 14:57:18Z forkel
101	! Correct/complete module_interface introduction for chemistry model
102	!
103	! 3887 2019 -04-12 08:47:41Z schwenkel
104	! Changes related to global restructuring of location messages and introduction
105	! of additional debug messages
106	!
107	! 3880 2019 -04-08 21:43:02Z knoop
108	! Add a call for salsa_prognostic_equations
109	!
110	! 3840 2019-03-29 10:35:52Z knoop
111	! bugfix: intent of dummy arguments changed to inout
112	!
113	! 3770 2019-02-28 11:22:32Z moh.hefny
114	! removed unused variables in module_interface_check_data_output_ts
115	!
116	! 3767 08:18:02Z raasch
117	! unused variable file_index removed from subroutine parameter list
118	!
119	! 3766 2019-02-26 16:23:41Z raasch
120	! first argument removed from module_interface_rrd_*, statement added to avoid
121	! compiler warning about unused variable, file reformatted with respect to coding
122	! standards
123	!
124	! 3762 2019-02-25 16:54:16Z suehring
125	! only pass required arguments to surface_data_output_rrd_local
126	!
127	! 3747 2019-02-16 15:15:23Z gronemeier
128	! Call user_init_arrays
129	!
130	! 3745 2019-02-15 18:57:56Z suehring
131	! Add indoor model
132	!
133	! 3744 2019-02-15 18:38:58Z suehring
134	! Removed bio_check_parameters as the method is empty.
135	!
136	! 3735 2019-02-12 09:52:40Z dom_dwd_user
137	! Accepting variable j from check_parameters and passing it to
138	! bio_check_data_output
139	! Add required restart data for surface output module
140	!
141	! 3731 2019-02-11 13:06:27Z suehring
142	! Add check_parameters routine for virtual measurements
143	!
144	! 3711 2019-01-31 13:44:26Z knoop
145	! Introduced module_interface_init_checks for post-init checks
146	!
147	! 3705 2019-01-29 19:56:39Z suehring
148	! Add last_actions for virtual measurements
149	!
150	! 3704 2019-01-29 19:51:41Z suehring
151	! Some interface calls moved to module_interface + cleanup
152	!
153	! 3684 2019-01-20 20:20:58Z knoop
154	! Bugfix: made unit intend INOUT
155	!
156	! 3650 2019-01-04 13:01:33Z kanani
157	! Add restart routines for biometeorology
158	!
159	! 3649 2019-01-02 16:52:21Z suehring
160	! Initialize strings, in order to avoid compiler warnings for non-initialized
161	! characters with intent(out) attribute
162	!
163	! 3648 2019-01-02 16:35:46Z suehring
164	! 3641 2018-12-23 22:10:01Z knoop
165	! Initial implementation of the PALM module interface
166	!
167	!
168	! Description:
169	! ------------
170	!> This is the interface between the PALM model core and all its modules.
171	!>
172	!> @todo Re-format module to be consistent with coding standard
173	!------------------------------------------------------------------------------!
174	MODULE module_interface
175
176	USE indices, &
177	ONLY: nbgp, nxl, nxlg, nxr, nxrg, nys, nysg, nyn, nyng, nzb, nzt
178
179	USE kinds
180
181	USE pegrid, &
182	ONLY: comm2d
183
184	!
185	!-- load module-specific control parameters.
186	!-- ToDo: move all of them to respective module or a dedicated central module
187	USE data_output_module, &
188	ONLY: dom_def_end, &
189	dom_finalize_output, &
190	dom_init
191
192	USE dynamics_mod, &
193	ONLY: dynamics_parin, &
194	dynamics_check_parameters, &
195	dynamics_check_data_output_ts, &
196	dynamics_check_data_output_pr, &
197	dynamics_check_data_output, &
198	dynamics_init_masks, &
199	dynamics_define_netcdf_grid, &
200	dynamics_init_arrays, &
201	dynamics_init, &
202	dynamics_init_checks, &
203	dynamics_header, &
204	dynamics_actions, &
205	dynamics_non_advective_processes, &
206	dynamics_exchange_horiz, &
207	dynamics_prognostic_equations, &
208	dynamics_boundary_conditions, &
209	dynamics_swap_timelevel, &
210	dynamics_3d_data_averaging, &
211	dynamics_data_output_2d, &
212	dynamics_data_output_3d, &
213	dynamics_statistics, &
214	dynamics_rrd_global, &
215	dynamics_rrd_local, &
216	dynamics_wrd_global, &
217	dynamics_wrd_local, &
218	dynamics_last_actions
219
220	USE turbulence_closure_mod, &
221	ONLY: tcm_check_parameters, &
222	tcm_check_data_output, &
223	tcm_init_arrays, &
224	tcm_init, &
225	tcm_actions, &
226	tcm_prognostic_equations, &
227	tcm_boundary_conds, &
228	tcm_swap_timelevel, &
229	tcm_3d_data_averaging, &
230	tcm_data_output_2d, &
231	tcm_data_output_3d
232
233	USE control_parameters, &
234	ONLY: air_chemistry, &
235	biometeorology, &
236	coupling_char, &
237	debug_output, &
238	debug_output_timestep, &
239	indoor_model, &
240	land_surface, &
241	large_scale_forcing, &
242	nesting_offline, &
243	nudging, &
244	ocean_mode, &
245	plant_canopy, &
246	salsa, &
247	surface_output, &
248	syn_turb_gen, &
249	urban_surface, &
250	vdi_checks, &
251	virtual_flight, &
252	virtual_measurement, &
253	wind_turbine
254
255	!
256	!-- load interface routines of all PALM modules
257	USE biometeorology_mod, &
258	ONLY: bio_parin, &
259	bio_check_data_output, &
260	bio_init, &
261	bio_init_checks, &
262	bio_header, &
263	bio_3d_data_averaging, &
264	bio_data_output_2d, &
265	bio_data_output_3d, &
266	bio_rrd_global, &
267	bio_rrd_local, &
268	bio_wrd_global, &
269	bio_wrd_local
270
271	USE bulk_cloud_model_mod, &
272	ONLY: bulk_cloud_model, &
273	bcm_parin, &
274	bcm_check_parameters, &
275	bcm_check_data_output_pr, &
276	bcm_check_data_output, &
277	bcm_init_arrays, &
278	bcm_init, &
279	bcm_header, &
280	bcm_actions, &
281	bcm_non_advective_processes, &
282	bcm_exchange_horiz, &
283	bcm_prognostic_equations, &
284	bcm_boundary_conditions, &
285	bcm_swap_timelevel, &
286	bcm_3d_data_averaging, &
287	bcm_data_output_2d, &
288	bcm_data_output_3d, &
289	bcm_rrd_global, &
290	bcm_wrd_global, &
291	bcm_rrd_local, &
292	bcm_wrd_local
293
294	USE chemistry_model_mod, &
295	ONLY: chem_parin, &
296	chem_check_parameters, &
297	chem_check_data_output_pr, &
298	chem_check_data_output, &
299	chem_exchange_horiz_bounds, &
300	chem_init_arrays, &
301	chem_init, &
302	chem_header, &
303	chem_actions, &
304	chem_non_advective_processes, &
305	chem_prognostic_equations, &
306	chem_boundary_conditions, &
307	chem_swap_timelevel, &
308	chem_3d_data_averaging, &
309	chem_data_output_2d, &
310	chem_data_output_3d, &
311	chem_statistics, &
312	chem_rrd_local, &
313	chem_wrd_local
314
315	USE diagnostic_output_quantities_mod, &
316	ONLY: doq_3d_data_averaging, &
317	doq_check_data_output, &
318	doq_define_netcdf_grid, &
319	doq_init, &
320	doq_output_2d, &
321	doq_output_3d, &
322	doq_wrd_local
323	! doq_rrd_local, &
324
325	USE flight_mod, &
326	ONLY: flight_parin, &
327	flight_header, &
328	flight_init, &
329	flight_rrd_global, &
330	flight_wrd_global
331
332	USE gust_mod, &
333	ONLY: gust_module_enabled, &
334	gust_parin, &
335	gust_check_parameters, &
336	gust_check_data_output_pr, &
337	gust_check_data_output, &
338	gust_init_arrays, &
339	gust_init, &
340	gust_header, &
341	gust_actions, &
342	gust_prognostic_equations, &
343	gust_swap_timelevel, &
344	gust_3d_data_averaging, &
345	gust_data_output_2d, &
346	gust_data_output_3d, &
347	gust_statistics, &
348	gust_rrd_global, &
349	gust_wrd_global, &
350	gust_rrd_local, &
351	gust_wrd_local
352
353	USE indoor_model_mod, &
354	ONLY: im_parin, &
355	im_check_data_output, &
356	im_check_parameters, &
357	im_data_output_3d, &
358	im_init
359
360	USE lagrangian_particle_model_mod, &
361	ONLY: lpm_parin, &
362	lpm_header, &
363	lpm_check_parameters, &
364	lpm_init_arrays, &
365	lpm_init, &
366	lpm_actions, &
367	lpm_rrd_global, &
368	lpm_rrd_local, &
369	lpm_wrd_local, &
370	lpm_wrd_global
371
372	USE land_surface_model_mod, &
373	ONLY: lsm_parin, &
374	lsm_check_parameters, &
375	lsm_check_data_output_pr, &
376	lsm_check_data_output, &
377	lsm_init_arrays, &
378	lsm_init, &
379	lsm_header, &
380	lsm_swap_timelevel, &
381	lsm_3d_data_averaging, &
382	lsm_data_output_2d, &
383	lsm_rrd_local, &
384	lsm_wrd_local
385
386	USE lsf_nudging_mod, &
387	ONLY: lsf_nudging_check_parameters, &
388	lsf_nudging_check_data_output_pr, &
389	lsf_init, &
390	nudge_init, &
391	lsf_nudging_header
392
393	USE multi_agent_system_mod, &
394	ONLY: mas_parin
395
396	USE nesting_offl_mod, &
397	ONLY: nesting_offl_parin, &
398	nesting_offl_check_parameters, &
399	nesting_offl_header
400
401	USE ocean_mod, &
402	ONLY: ocean_parin, &
403	ocean_check_parameters, &
404	ocean_check_data_output_pr, &
405	ocean_check_data_output, &
406	ocean_init_arrays, &
407	ocean_init, &
408	ocean_header, &
409	ocean_actions, &
410	ocean_prognostic_equations, &
411	ocean_boundary_conditions, &
412	ocean_swap_timelevel, &
413	ocean_3d_data_averaging, &
414	ocean_data_output_2d, &
415	ocean_data_output_3d, &
416	ocean_rrd_global, &
417	ocean_wrd_global, &
418	ocean_rrd_local, &
419	ocean_wrd_local
420
421	USE particle_attributes, &
422	ONLY: particle_advection
423
424	USE plant_canopy_model_mod, &
425	ONLY: pcm_parin, &
426	pcm_check_parameters, &
427	pcm_check_data_output, &
428	pcm_init, &
429	pcm_header, &
430	pcm_3d_data_averaging, &
431	pcm_data_output_3d, &
432	pcm_rrd_local, &
433	pcm_wrd_local
434
435	USE radiation_model_mod, &
436	ONLY: radiation, &
437	radiation_parin, &
438	radiation_check_parameters, &
439	radiation_check_data_output_ts, &
440	radiation_check_data_output_pr, &
441	radiation_check_data_output, &
442	radiation_init, &
443	radiation_header, &
444	radiation_3d_data_averaging, &
445	radiation_data_output_2d, &
446	radiation_data_output_3d, &
447	radiation_rrd_local, &
448	radiation_wrd_local
449
450	USE salsa_mod, &
451	ONLY: salsa_parin, &
452	salsa_check_parameters, &
453	salsa_check_data_output_pr, &
454	salsa_check_data_output, &
455	salsa_init_arrays, &
456	salsa_init, &
457	salsa_header, &
458	salsa_actions, &
459	salsa_non_advective_processes, &
460	salsa_exchange_horiz_bounds, &
461	salsa_prognostic_equations, &
462	salsa_boundary_conditions, &
463	salsa_swap_timelevel, &
464	salsa_3d_data_averaging, &
465	salsa_data_output_2d, &
466	salsa_data_output_3d, &
467	salsa_statistics, &
468	salsa_rrd_local, &
469	salsa_wrd_local
470
471	USE spectra_mod, &
472	ONLY: calculate_spectra, &
473	spectra_parin, &
474	spectra_check_parameters, &
475	spectra_header
476
477	USE surface_data_output_mod, &
478	ONLY: surface_data_output_parin, &
479	surface_data_output_check_parameters, &
480	surface_data_output_init_arrays, &
481	surface_data_output_rrd_local, &
482	surface_data_output_rrd_global, &
483	surface_data_output_wrd_local, &
484	surface_data_output_wrd_global
485
486	USE synthetic_turbulence_generator_mod, &
487	ONLY: stg_parin, &
488	stg_check_parameters, &
489	stg_header, &
490	stg_rrd_global, &
491	stg_wrd_global
492
493	USE urban_surface_mod, &
494	ONLY: usm_parin, &
495	usm_check_parameters, &
496	usm_check_data_output, &
497	usm_init_arrays, &
498	usm_init, &
499	usm_swap_timelevel, &
500	usm_3d_data_averaging, &
501	usm_rrd_local, &
502	usm_wrd_local
503
504	USE vdi_internal_controls, &
505	ONLY: vdi_actions
506
507	USE virtual_measurement_mod, &
508	ONLY: vm_check_parameters, &
509	vm_init, &
510	vm_init_output, &
511	vm_parin
512
513	USE wind_turbine_model_mod, &
514	ONLY: wtm_parin, &
515	wtm_check_parameters, &
516	wtm_init_arrays, &
517	wtm_init, &
518	wtm_actions, &
519	wtm_rrd_global, &
520	wtm_wrd_global
521
522	USE user, &
523	ONLY: user_module_enabled, &
524	user_parin, &
525	user_check_parameters, &
526	user_check_data_output_ts, &
527	user_check_data_output_pr, &
528	user_check_data_output, &
529	user_init, &
530	user_init_arrays, &
531	user_header, &
532	user_actions, &
533	user_3d_data_averaging, &
534	user_data_output_2d, &
535	user_data_output_3d, &
536	user_statistics, &
537	user_rrd_global, &
538	user_rrd_local, &
539	user_wrd_global, &
540	user_wrd_local, &
541	user_last_actions
542
543	IMPLICIT NONE
544
545	PRIVATE
546
547	!
548	!-- Public functions
549	PUBLIC &
550	module_interface_parin, &
551	module_interface_check_parameters, &
552	module_interface_check_data_output_ts, &
553	module_interface_check_data_output_pr, &
554	module_interface_check_data_output, &
555	module_interface_init_masks, &
556	module_interface_define_netcdf_grid, &
557	module_interface_init_arrays, &
558	module_interface_init, &
559	module_interface_init_checks, &
560	module_interface_init_output, &
561	module_interface_header, &
562	module_interface_actions, &
563	module_interface_non_advective_processes, &
564	module_interface_exchange_horiz, &
565	module_interface_prognostic_equations, &
566	module_interface_boundary_conditions, &
567	module_interface_swap_timelevel, &
568	module_interface_3d_data_averaging, &
569	module_interface_data_output_2d, &
570	module_interface_data_output_3d, &
571	module_interface_statistics, &
572	module_interface_rrd_global, &
573	module_interface_wrd_global, &
574	module_interface_rrd_local, &
575	module_interface_wrd_local, &
576	module_interface_last_actions
577
578
579	INTERFACE module_interface_parin
580	MODULE PROCEDURE module_interface_parin
581	END INTERFACE module_interface_parin
582
583	INTERFACE module_interface_check_parameters
584	MODULE PROCEDURE module_interface_check_parameters
585	END INTERFACE module_interface_check_parameters
586
587	INTERFACE module_interface_check_data_output_ts
588	MODULE PROCEDURE module_interface_check_data_output_ts
589	END INTERFACE module_interface_check_data_output_ts
590
591	INTERFACE module_interface_check_data_output_pr
592	MODULE PROCEDURE module_interface_check_data_output_pr
593	END INTERFACE module_interface_check_data_output_pr
594
595	INTERFACE module_interface_check_data_output
596	MODULE PROCEDURE module_interface_check_data_output
597	END INTERFACE module_interface_check_data_output
598
599	INTERFACE module_interface_init_masks
600	MODULE PROCEDURE module_interface_init_masks
601	END INTERFACE module_interface_init_masks
602
603	INTERFACE module_interface_define_netcdf_grid
604	MODULE PROCEDURE module_interface_define_netcdf_grid
605	END INTERFACE module_interface_define_netcdf_grid
606
607	INTERFACE module_interface_init_arrays
608	MODULE PROCEDURE module_interface_init_arrays
609	END INTERFACE module_interface_init_arrays
610
611	INTERFACE module_interface_init
612	MODULE PROCEDURE module_interface_init
613	END INTERFACE module_interface_init
614
615	INTERFACE module_interface_init_checks
616	MODULE PROCEDURE module_interface_init_checks
617	END INTERFACE module_interface_init_checks
618
619	INTERFACE module_interface_init_output
620	MODULE PROCEDURE module_interface_init_output
621	END INTERFACE module_interface_init_output
622
623	INTERFACE module_interface_header
624	MODULE PROCEDURE module_interface_header
625	END INTERFACE module_interface_header
626
627	INTERFACE module_interface_actions
628	MODULE PROCEDURE module_interface_actions
629	MODULE PROCEDURE module_interface_actions_ij
630	END INTERFACE module_interface_actions
631
632	INTERFACE module_interface_non_advective_processes
633	MODULE PROCEDURE module_interface_non_advective_processes
634	MODULE PROCEDURE module_interface_non_advective_processes_ij
635	END INTERFACE module_interface_non_advective_processes
636
637	INTERFACE module_interface_exchange_horiz
638	MODULE PROCEDURE module_interface_exchange_horiz
639	END INTERFACE module_interface_exchange_horiz
640
641	INTERFACE module_interface_prognostic_equations
642	MODULE PROCEDURE module_interface_prognostic_equations
643	MODULE PROCEDURE module_interface_prognostic_equations_ij
644	END INTERFACE module_interface_prognostic_equations
645
646	INTERFACE module_interface_swap_timelevel
647	MODULE PROCEDURE module_interface_swap_timelevel
648	END INTERFACE module_interface_swap_timelevel
649
650	INTERFACE module_interface_boundary_conditions
651	MODULE PROCEDURE module_interface_boundary_conditions
652	END INTERFACE module_interface_boundary_conditions
653
654	INTERFACE module_interface_3d_data_averaging
655	MODULE PROCEDURE module_interface_3d_data_averaging
656	END INTERFACE module_interface_3d_data_averaging
657
658	INTERFACE module_interface_data_output_2d
659	MODULE PROCEDURE module_interface_data_output_2d
660	END INTERFACE module_interface_data_output_2d
661
662	INTERFACE module_interface_data_output_3d
663	MODULE PROCEDURE module_interface_data_output_3d
664	END INTERFACE module_interface_data_output_3d
665
666	INTERFACE module_interface_statistics
667	MODULE PROCEDURE module_interface_statistics
668	END INTERFACE module_interface_statistics
669
670	INTERFACE module_interface_rrd_global
671	MODULE PROCEDURE module_interface_rrd_global
672	END INTERFACE module_interface_rrd_global
673
674	INTERFACE module_interface_wrd_global
675	MODULE PROCEDURE module_interface_wrd_global
676	END INTERFACE module_interface_wrd_global
677
678	INTERFACE module_interface_rrd_local
679	MODULE PROCEDURE module_interface_rrd_local
680	END INTERFACE module_interface_rrd_local
681
682	INTERFACE module_interface_wrd_local
683	MODULE PROCEDURE module_interface_wrd_local
684	END INTERFACE module_interface_wrd_local
685
686	INTERFACE module_interface_last_actions
687	MODULE PROCEDURE module_interface_last_actions
688	END INTERFACE module_interface_last_actions
689
690
691	CONTAINS
692
693
694	!------------------------------------------------------------------------------!
695	! Description:
696	! ------------
697	!> Read module-specific parameter namelists
698	!------------------------------------------------------------------------------!
699	SUBROUTINE module_interface_parin
700
701
702	IF ( debug_output ) CALL debug_message( 'reading module-specific parameters', 'start' )
703
704	CALL dynamics_parin
705
706	CALL bio_parin
707	CALL bcm_parin
708	CALL chem_parin
709	CALL flight_parin ! ToDo: rename module to match filename
710	CALL gust_parin
711	CALL im_parin
712	CALL lpm_parin
713	CALL lsm_parin
714	! ToDo: create parin routine for large_scale_forcing and nudging (should be seperate modules or new module switch)
715	CALL mas_parin
716	CALL nesting_offl_parin
717	CALL ocean_parin
718	CALL pcm_parin
719	CALL radiation_parin
720	CALL salsa_parin
721	CALL spectra_parin
722	CALL surface_data_output_parin
723	CALL stg_parin
724	CALL usm_parin
725	CALL vm_parin
726	CALL wtm_parin
727
728	CALL user_parin
729
730	IF ( debug_output ) CALL debug_message( 'reading module-specific parameters', 'end' )
731
732
733	END SUBROUTINE module_interface_parin
734
735
736	!------------------------------------------------------------------------------!
737	! Description:
738	! ------------
739	!> Perform module-specific initialization checks
740	!------------------------------------------------------------------------------!
741	SUBROUTINE module_interface_check_parameters
742
743
744	IF ( debug_output ) CALL debug_message( 'checking module-specific parameters', 'start' )
745
746	CALL dynamics_check_parameters
747	CALL tcm_check_parameters
748
749	IF ( bulk_cloud_model ) CALL bcm_check_parameters
750	IF ( air_chemistry ) CALL chem_check_parameters
751	IF ( gust_module_enabled ) CALL gust_check_parameters
752	IF ( indoor_model ) CALL im_check_parameters
753	IF ( particle_advection ) CALL lpm_check_parameters
754	IF ( land_surface ) CALL lsm_check_parameters
755	IF ( large_scale_forcing .OR. nudging ) CALL lsf_nudging_check_parameters ! ToDo: create single module switch
756	IF ( nesting_offline ) CALL nesting_offl_check_parameters
757	IF ( ocean_mode ) CALL ocean_check_parameters
758	IF ( plant_canopy ) CALL pcm_check_parameters
759	IF ( radiation ) CALL radiation_check_parameters
760	IF ( salsa ) CALL salsa_check_parameters
761	IF ( calculate_spectra ) CALL spectra_check_parameters
762	IF ( surface_output ) CALL surface_data_output_check_parameters
763	IF ( syn_turb_gen ) CALL stg_check_parameters
764	IF ( urban_surface ) CALL usm_check_parameters
765	IF ( virtual_measurement ) CALL vm_check_parameters
766	IF ( wind_turbine ) CALL wtm_check_parameters
767
768	IF ( user_module_enabled ) CALL user_check_parameters
769
770	IF ( debug_output ) CALL debug_message( 'checking module-specific parameters', 'end' )
771
772
773	END SUBROUTINE module_interface_check_parameters
774
775
776	!------------------------------------------------------------------------------!
777	! Description:
778	! ------------
779	!> Check module-specific data output of timeseries
780	!------------------------------------------------------------------------------!
781	SUBROUTINE module_interface_check_data_output_ts( dots_max, dots_num, dots_label, dots_unit )
782
783
784	INTEGER(iwp), INTENT(IN) :: dots_max !< variable output array index
785	INTEGER(iwp), INTENT(INOUT) :: dots_num !< variable output array index
786	CHARACTER (LEN=*), DIMENSION(dots_max), INTENT(INOUT) :: dots_label
787	CHARACTER (LEN=*), DIMENSION(dots_max), INTENT(INOUT) :: dots_unit
788
789
790	IF ( debug_output ) CALL debug_message( 'checking module-specific data output ts', 'start' )
791
792	CALL dynamics_check_data_output_ts( dots_max, dots_num, dots_label, dots_unit )
793
794	IF ( radiation ) THEN
795	CALL radiation_check_data_output_ts( dots_max, dots_num )
796	ENDIF
797
798	IF ( user_module_enabled ) THEN
799	CALL user_check_data_output_ts( dots_max, dots_num, dots_label, dots_unit )
800	ENDIF
801
802	IF ( debug_output ) CALL debug_message( 'checking module-specific data output ts', 'end' )
803
804
805	END SUBROUTINE module_interface_check_data_output_ts
806
807
808	!------------------------------------------------------------------------------!
809	! Description:
810	! ------------
811	!> Check module-specific data output of profiles
812	!------------------------------------------------------------------------------!
813	SUBROUTINE module_interface_check_data_output_pr( variable, var_count, unit, &
814	dopr_unit )
815
816
817	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
818	INTEGER(iwp), INTENT(IN) :: var_count !< variable output array index
819	CHARACTER (LEN=*), INTENT(INOUT) :: unit !< physical unit of variable
820	CHARACTER (LEN=*), INTENT(OUT) :: dopr_unit !< local value of dopr_unit
821
822
823	IF ( debug_output ) CALL debug_message( 'checking module-specific data output pr', 'start' )
824
825	CALL dynamics_check_data_output_pr( variable, var_count, unit, dopr_unit )
826
827	IF ( unit == 'illegal' .AND. bulk_cloud_model ) THEN
828	CALL bcm_check_data_output_pr( variable, var_count, unit, dopr_unit )
829	ENDIF
830
831	IF ( unit == 'illegal' .AND. air_chemistry ) THEN
832	CALL chem_check_data_output_pr( variable, var_count, unit, dopr_unit )
833	ENDIF
834
835	IF ( unit == 'illegal' .AND. gust_module_enabled ) THEN
836	CALL gust_check_data_output_pr( variable, var_count, unit, dopr_unit )
837	ENDIF
838
839	IF ( unit == 'illegal' ) THEN ! ToDo: add module switch if possible
840	CALL lsm_check_data_output_pr( variable, var_count, unit, dopr_unit )
841	ENDIF
842
843	IF ( unit == 'illegal' ) THEN ! ToDo: add module switch if possible
844	CALL lsf_nudging_check_data_output_pr( variable, var_count, unit, dopr_unit )
845	ENDIF
846
847	IF ( unit == 'illegal' .AND. ocean_mode ) THEN
848	CALL ocean_check_data_output_pr( variable, var_count, unit, dopr_unit )
849	ENDIF
850
851	IF ( unit == 'illegal' .AND. radiation ) THEN
852	CALL radiation_check_data_output_pr( variable, var_count, unit, dopr_unit )
853	ENDIF
854
855	IF ( unit == 'illegal' .AND. salsa ) THEN
856	CALL salsa_check_data_output_pr( variable, var_count, unit, dopr_unit )
857	ENDIF
858
859	IF ( unit == 'illegal' .AND. user_module_enabled ) THEN
860	unit = '' ! ToDo: Seems like a hack. Find a general soultion!
861	CALL user_check_data_output_pr( variable, var_count, unit, dopr_unit )
862	ENDIF
863
864	IF ( debug_output ) CALL debug_message( 'checking module-specific data output pr', 'end' )
865
866
867	END SUBROUTINE module_interface_check_data_output_pr
868
869	!------------------------------------------------------------------------------!
870	! Description:
871	! ------------
872	!> Check module-specific 2D and 3D data output
873	!------------------------------------------------------------------------------!
874	SUBROUTINE module_interface_check_data_output( variable, unit, i, j, ilen, k )
875
876
877	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
878	CHARACTER (LEN=*), INTENT(INOUT) :: unit !< physical unit of variable
879
880	INTEGER(iwp), INTENT(IN) :: i !< ToDo: remove dummy argument, instead pass string from data_output
881	INTEGER(iwp), INTENT(IN) :: j !< average quantity? 0 = no, 1 = yes
882	INTEGER(iwp), INTENT(IN) :: ilen !< ToDo: remove dummy argument, instead pass string from data_output
883	INTEGER(iwp), INTENT(IN) :: k !< ToDo: remove dummy argument, instead pass string from data_output
884
885
886	IF ( debug_output ) CALL debug_message( 'checking module-specific data output 2d/3d', 'start' )
887
888	CALL dynamics_check_data_output( variable, unit )
889
890	CALL tcm_check_data_output( variable, unit )
891
892	IF ( unit == 'illegal' .AND. biometeorology ) THEN
893	CALL bio_check_data_output( variable, unit, i, j, ilen, k )
894	ENDIF
895
896	IF ( unit == 'illegal' .AND. bulk_cloud_model ) THEN
897	CALL bcm_check_data_output( variable, unit )
898	ENDIF
899
900	IF ( unit == 'illegal' .AND. air_chemistry &
901	.AND. (variable(1:3) == 'kc_' .OR. variable(1:3) == 'em_') ) THEN ! ToDo: remove aditional conditions
902	CALL chem_check_data_output( variable, unit, i, ilen, k )
903	ENDIF
904
905	IF ( unit == 'illegal' ) THEN
906	CALL doq_check_data_output( variable, unit, i, ilen, k )
907	ENDIF
908
909	IF ( unit == 'illegal' .AND. gust_module_enabled ) THEN
910	CALL gust_check_data_output( variable, unit )
911	ENDIF
912
913	IF ( unit == 'illegal' ) THEN ! ToDo: add module switch if possible
914	CALL lsm_check_data_output( variable, unit, i, ilen, k )
915	ENDIF
916
917	IF ( unit == 'illegal' .AND. ocean_mode ) THEN
918	CALL ocean_check_data_output( variable, unit )
919	ENDIF
920
921	IF ( unit == 'illegal' .AND. plant_canopy &
922	.AND. variable(1:4) == 'pcm_' ) THEN ! ToDo: remove aditional conditions
923	CALL pcm_check_data_output( variable, unit )
924	ENDIF
925
926	IF ( unit == 'illegal' .AND. radiation ) THEN
927	CALL radiation_check_data_output( variable, unit, i, ilen, k )
928	ENDIF
929
930	IF ( unit == 'illegal' .AND. salsa ) THEN
931	CALL salsa_check_data_output( variable, unit )
932	ENDIF
933
934	IF ( unit == 'illegal' .AND. indoor_model ) THEN
935	CALL im_check_data_output( variable, unit )
936	ENDIF
937
938	IF ( unit == 'illegal' .AND. urban_surface &
939	.AND. variable(1:4) == 'usm_' ) THEN ! ToDo: remove aditional conditions
940	CALL usm_check_data_output( variable, unit )
941	ENDIF
942
943	IF ( unit == 'illegal' .AND. user_module_enabled ) THEN
944	unit = ''
945	CALL user_check_data_output( variable, unit )
946	ENDIF
947
948	IF ( debug_output ) CALL debug_message( 'checking module-specific data output 2d/3d', 'end' )
949
950
951	END SUBROUTINE module_interface_check_data_output
952
953
954	!------------------------------------------------------------------------------!
955	!
956	! Description:
957	! ------------
958	!> Interface for init_masks. ToDo: get rid of these redundant calls!
959	!------------------------------------------------------------------------------!
960	SUBROUTINE module_interface_init_masks( variable, unit )
961
962
963	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
964	CHARACTER (LEN=*), INTENT(INOUT) :: unit !< physical unit of variable
965
966
967	IF ( debug_output ) CALL debug_message( 'initializing module-specific masks', 'start' )
968
969	CALL dynamics_init_masks( variable, unit )
970
971	IF ( unit == 'illegal' .AND. air_chemistry &
972	.AND. (variable(1:3) == 'kc_' .OR. variable(1:3) == 'em_') ) THEN ! ToDo: remove aditional conditions
973	CALL chem_check_data_output( variable, unit, 0, 0, 0 )
974	ENDIF
975
976	IF ( unit == 'illegal' ) THEN
977	CALL doq_check_data_output( variable, unit )
978	ENDIF
979
980	IF ( unit == 'illegal' .AND. radiation ) THEN
981	CALL radiation_check_data_output( variable, unit, 0, 0, 0 )
982	ENDIF
983
984	IF ( unit == 'illegal' .AND. salsa ) THEN
985	CALL salsa_check_data_output( variable, unit )
986	ENDIF
987
988	IF ( unit == 'illegal' .AND. user_module_enabled ) THEN
989	unit = ''
990	CALL user_check_data_output( variable, unit )
991	ENDIF
992
993	IF ( debug_output ) CALL debug_message( 'initializing module-specific masks', 'end' )
994
995
996	END SUBROUTINE module_interface_init_masks
997
998
999	!------------------------------------------------------------------------------!
1000	!
1001	! Description:
1002	! ------------
1003	!> Define appropriate grid for module-specific netcdf output variables.
1004	!------------------------------------------------------------------------------!
1005	SUBROUTINE module_interface_define_netcdf_grid( var, found, &
1006	grid_x, grid_y, grid_z )
1007
1008
1009	CHARACTER (LEN=*), INTENT(IN) :: var !< variable name
1010	LOGICAL, INTENT(OUT) :: found !< indicates if variable was found
1011	CHARACTER (LEN=*), INTENT(OUT) :: grid_x !< netcdf dimension in x-direction
1012	CHARACTER (LEN=*), INTENT(OUT) :: grid_y !< netcdf dimension in y-direction
1013	CHARACTER (LEN=*), INTENT(OUT) :: grid_z !< netcdf dimension in z-direction
1014
1015
1016	IF ( debug_output ) CALL debug_message( 'defining module-specific netcdf grids', 'start' )
1017	!
1018	!-- As long as no action is done in this subroutine, initialize strings with
1019	!-- intent(out) attribute, in order to avoid compiler warnings.
1020	found = .FALSE.
1021	grid_x = 'none'
1022	grid_y = 'none'
1023	grid_z = 'none'
1024	!
1025	!-- Use var to avoid compiler warning about unused variable
1026	IF ( var == ' ' ) RETURN
1027
1028	IF ( debug_output ) CALL debug_message( 'defining module-specific netcdf grids', 'end' )
1029
1030
1031	END SUBROUTINE module_interface_define_netcdf_grid
1032
1033
1034	!------------------------------------------------------------------------------!
1035	! Description:
1036	! ------------
1037	!> Allocate module-specific arrays and pointers
1038	!------------------------------------------------------------------------------!
1039	SUBROUTINE module_interface_init_arrays
1040
1041
1042	IF ( debug_output ) CALL debug_message( 'initializing module-specific arrays', 'start' )
1043
1044	CALL dynamics_init_arrays
1045	CALL tcm_init_arrays
1046
1047	IF ( bulk_cloud_model ) CALL bcm_init_arrays
1048	IF ( air_chemistry ) CALL chem_init_arrays
1049	IF ( gust_module_enabled ) CALL gust_init_arrays
1050	IF ( particle_advection ) CALL lpm_init_arrays
1051	IF ( land_surface ) CALL lsm_init_arrays
1052	IF ( ocean_mode ) CALL ocean_init_arrays
1053	IF ( salsa ) CALL salsa_init_arrays
1054	IF ( urban_surface ) CALL usm_init_arrays
1055	IF ( surface_output ) CALL surface_data_output_init_arrays
1056	IF ( wind_turbine ) CALL wtm_init_arrays
1057
1058	IF ( user_module_enabled ) CALL user_init_arrays
1059
1060	IF ( debug_output ) CALL debug_message( 'initializing module-specific arrays', 'end' )
1061
1062
1063	END SUBROUTINE module_interface_init_arrays
1064
1065
1066	!------------------------------------------------------------------------------!
1067	! Description:
1068	! ------------
1069	!> Perform module-specific initialization
1070	!------------------------------------------------------------------------------!
1071	SUBROUTINE module_interface_init
1072
1073
1074	IF ( debug_output ) CALL debug_message( 'module-specific initialization', 'start' )
1075
1076	CALL dynamics_init
1077	CALL tcm_init
1078
1079	IF ( biometeorology ) CALL bio_init
1080	IF ( bulk_cloud_model ) CALL bcm_init
1081	IF ( air_chemistry ) CALL chem_init
1082	IF ( virtual_flight ) CALL flight_init
1083	IF ( gust_module_enabled ) CALL gust_init
1084	IF ( indoor_model ) CALL im_init
1085	IF ( particle_advection ) CALL lpm_init
1086	IF ( large_scale_forcing ) CALL lsf_init
1087	IF ( land_surface ) CALL lsm_init
1088	IF ( nudging ) CALL nudge_init
1089	IF ( ocean_mode ) CALL ocean_init
1090	IF ( plant_canopy ) CALL pcm_init
1091	IF ( salsa ) CALL salsa_init
1092	IF ( urban_surface ) CALL usm_init
1093	IF ( virtual_measurement ) CALL vm_init
1094	IF ( wind_turbine ) CALL wtm_init
1095	IF ( radiation ) CALL radiation_init
1096
1097	CALL doq_init
1098
1099	IF ( user_module_enabled ) CALL user_init
1100
1101	IF ( debug_output ) CALL debug_message( 'module-specific initialization', 'end' )
1102
1103	END SUBROUTINE module_interface_init
1104
1105	!------------------------------------------------------------------------------!
1106	! Description:
1107	! ------------
1108	!> Initialize data output
1109	!------------------------------------------------------------------------------!
1110	SUBROUTINE module_interface_init_output
1111
1112	INTEGER(iwp) :: return_value !< returned status value of called function
1113
1114	!
1115	!-- Initialize data-output module
1116	CALL dom_init( file_suffix_of_output_group=coupling_char, &
1117	mpi_comm_of_output_group=comm2d, &
1118	program_debug_output_unit=9, &
1119	debug_output=debug_output )
1120	!
1121	!-- Define module-specific output quantities
1122	IF ( virtual_measurement ) CALL vm_init_output
1123	!
1124	!-- Leave output-definition state
1125	return_value = dom_def_end()
1126
1127	END SUBROUTINE module_interface_init_output
1128
1129	!------------------------------------------------------------------------------!
1130	! Description:
1131	! ------------
1132	!> Perform module-specific post-initialization checks
1133	!------------------------------------------------------------------------------!
1134	SUBROUTINE module_interface_init_checks
1135
1136
1137	IF ( debug_output ) CALL debug_message( 'module-specific post-initialization checks', 'start' )
1138
1139	CALL dynamics_init_checks
1140
1141	IF ( biometeorology ) CALL bio_init_checks
1142
1143	IF ( debug_output ) CALL debug_message( 'module-specific post-initialization checks', 'end' )
1144
1145
1146	END SUBROUTINE module_interface_init_checks
1147
1148
1149	!------------------------------------------------------------------------------!
1150	! Description:
1151	! ------------
1152	!> Gather module-specific header output
1153	!------------------------------------------------------------------------------!
1154	SUBROUTINE module_interface_header( io )
1155
1156
1157	INTEGER(iwp), INTENT(IN) :: io !< unit of the output file
1158
1159
1160	IF ( debug_output ) CALL debug_message( 'module-specific header output', 'start' )
1161
1162	CALL dynamics_header( io )
1163
1164	IF ( biometeorology ) CALL bio_header ( io )
1165	IF ( bulk_cloud_model ) CALL bcm_header( io )
1166	IF ( air_chemistry ) CALL chem_header ( io )
1167	IF ( virtual_flight ) CALL flight_header( io )
1168	IF ( gust_module_enabled ) CALL gust_header( io )
1169	IF ( particle_advection ) CALL lpm_header( io )
1170	IF ( land_surface ) CALL lsm_header( io )
1171	IF ( large_scale_forcing ) CALL lsf_nudging_header( io )
1172	IF ( nesting_offline ) CALL nesting_offl_header( io )
1173	IF ( ocean_mode ) CALL ocean_header( io )
1174	IF ( plant_canopy ) CALL pcm_header( io )
1175	IF ( radiation ) CALL radiation_header( io )
1176	IF ( salsa ) CALL salsa_header( io )
1177	IF ( calculate_spectra ) CALL spectra_header( io )
1178	IF ( syn_turb_gen ) CALL stg_header( io )
1179
1180	IF ( user_module_enabled ) CALL user_header( io )
1181
1182	IF ( debug_output ) CALL debug_message( 'module-specific header output', 'end' )
1183
1184
1185	END SUBROUTINE module_interface_header
1186
1187
1188	!------------------------------------------------------------------------------!
1189	! Description:
1190	! ------------
1191	!> Perform module-specific actions while in time-integration (vector-optimized)
1192	!------------------------------------------------------------------------------!
1193	SUBROUTINE module_interface_actions( location )
1194
1195
1196	CHARACTER (LEN=*), INTENT(IN) :: location !< call location string
1197
1198	CALL dynamics_actions( location )
1199	CALL tcm_actions( location )
1200
1201	IF ( bulk_cloud_model ) CALL bcm_actions( location )
1202	IF ( air_chemistry ) CALL chem_actions( location )
1203	IF ( gust_module_enabled ) CALL gust_actions( location )
1204	IF ( particle_advection ) CALL lpm_actions( location )
1205	IF ( ocean_mode ) CALL ocean_actions( location )
1206	IF ( salsa ) CALL salsa_actions( location )
1207	IF ( wind_turbine ) CALL wtm_actions( location )
1208
1209	IF ( user_module_enabled ) CALL user_actions( location )
1210	IF ( vdi_checks ) CALL vdi_actions( location )
1211
1212
1213	END SUBROUTINE module_interface_actions
1214
1215
1216	!------------------------------------------------------------------------------!
1217	! Description:
1218	! ------------
1219	!> Perform module-specific actions while in time-integration (cache-optimized)
1220	!------------------------------------------------------------------------------!
1221	SUBROUTINE module_interface_actions_ij( i, j, location )
1222
1223
1224	INTEGER(iwp), INTENT(IN) :: i !< grid index in x-direction
1225	INTEGER(iwp), INTENT(IN) :: j !< grid index in y-direction
1226	CHARACTER (LEN=*), INTENT(IN) :: location !< call location string
1227
1228	CALL dynamics_actions( i, j, location )
1229	CALL tcm_actions( i, j, location )
1230
1231	IF ( bulk_cloud_model ) CALL bcm_actions( i, j, location )
1232	IF ( air_chemistry ) CALL chem_actions( i, j, location )
1233	IF ( gust_module_enabled ) CALL gust_actions( i, j, location )
1234	IF ( ocean_mode ) CALL ocean_actions( i, j, location )
1235	IF ( salsa ) CALL salsa_actions( i, j, location )
1236	IF ( wind_turbine ) CALL wtm_actions( i, j, location )
1237
1238	IF ( user_module_enabled ) CALL user_actions( i, j, location )
1239
1240
1241	END SUBROUTINE module_interface_actions_ij
1242
1243
1244	!------------------------------------------------------------------------------!
1245	! Description:
1246	! ------------
1247	!> Compute module-specific non_advective_processes (vector-optimized)
1248	!------------------------------------------------------------------------------!
1249	SUBROUTINE module_interface_non_advective_processes
1250
1251
1252	CALL dynamics_non_advective_processes
1253
1254	IF ( bulk_cloud_model ) CALL bcm_non_advective_processes
1255	IF ( air_chemistry ) CALL chem_non_advective_processes
1256	IF ( salsa ) CALL salsa_non_advective_processes
1257
1258
1259	END SUBROUTINE module_interface_non_advective_processes
1260
1261
1262	!------------------------------------------------------------------------------!
1263	! Description:
1264	! ------------
1265	!> Compute module-specific non_advective_processes (cache-optimized)
1266	!------------------------------------------------------------------------------!
1267	SUBROUTINE module_interface_non_advective_processes_ij( i, j )
1268
1269
1270	INTEGER(iwp), INTENT(IN) :: i !< grid index in x-direction
1271	INTEGER(iwp), INTENT(IN) :: j !< grid index in y-direction
1272
1273	CALL dynamics_non_advective_processes( i, j )
1274
1275	IF ( bulk_cloud_model ) CALL bcm_non_advective_processes( i, j )
1276	IF ( air_chemistry ) CALL chem_non_advective_processes( i, j )
1277	IF ( salsa ) CALL salsa_non_advective_processes( i, j )
1278
1279
1280	END SUBROUTINE module_interface_non_advective_processes_ij
1281
1282	!------------------------------------------------------------------------------!
1283	! Description:
1284	! ------------
1285	!> Exchange horiz for module-specific quantities
1286	!------------------------------------------------------------------------------!
1287	SUBROUTINE module_interface_exchange_horiz
1288
1289
1290	IF ( debug_output_timestep ) CALL debug_message( 'module-specific exchange_horiz', 'start' )
1291
1292	CALL dynamics_exchange_horiz
1293
1294	IF ( bulk_cloud_model ) CALL bcm_exchange_horiz
1295	IF ( air_chemistry ) CALL chem_exchange_horiz_bounds
1296	IF ( salsa ) CALL salsa_exchange_horiz_bounds
1297
1298	IF ( debug_output_timestep ) CALL debug_message( 'module-specific exchange_horiz', 'end' )
1299
1300
1301	END SUBROUTINE module_interface_exchange_horiz
1302
1303
1304	!------------------------------------------------------------------------------!
1305	! Description:
1306	! ------------
1307	!> Compute module-specific prognostic_equations (vector-optimized)
1308	!------------------------------------------------------------------------------!
1309	SUBROUTINE module_interface_prognostic_equations
1310
1311
1312	CALL dynamics_prognostic_equations
1313	CALL tcm_prognostic_equations
1314
1315	IF ( bulk_cloud_model ) CALL bcm_prognostic_equations
1316	IF ( air_chemistry ) CALL chem_prognostic_equations
1317	IF ( gust_module_enabled ) CALL gust_prognostic_equations
1318	IF ( ocean_mode ) CALL ocean_prognostic_equations
1319	IF ( salsa ) CALL salsa_prognostic_equations
1320
1321
1322	END SUBROUTINE module_interface_prognostic_equations
1323
1324
1325	!------------------------------------------------------------------------------!
1326	! Description:
1327	! ------------
1328	!> Compute module-specific prognostic_equations (cache-optimized)
1329	!------------------------------------------------------------------------------!
1330	SUBROUTINE module_interface_prognostic_equations_ij( i, j, i_omp_start, tn )
1331
1332
1333	INTEGER(iwp), INTENT(IN) :: i !< grid index in x-direction
1334	INTEGER(iwp), INTENT(IN) :: j !< grid index in y-direction
1335	INTEGER(iwp), INTENT(IN) :: i_omp_start !< first loop index of i-loop in prognostic_equations
1336	INTEGER(iwp), INTENT(IN) :: tn !< task number of openmp task
1337
1338	CALL dynamics_prognostic_equations( i, j, i_omp_start, tn )
1339	CALL tcm_prognostic_equations( i, j, i_omp_start, tn )
1340
1341	IF ( bulk_cloud_model ) CALL bcm_prognostic_equations( i, j, i_omp_start, tn )
1342	IF ( air_chemistry ) CALL chem_prognostic_equations( i, j, i_omp_start, tn )
1343	IF ( gust_module_enabled ) CALL gust_prognostic_equations( i, j, i_omp_start, tn )
1344	IF ( ocean_mode ) CALL ocean_prognostic_equations( i, j, i_omp_start, tn )
1345	IF ( salsa ) CALL salsa_prognostic_equations( i, j, i_omp_start, tn )
1346
1347
1348	END SUBROUTINE module_interface_prognostic_equations_ij
1349
1350	!------------------------------------------------------------------------------!
1351	! Description:
1352	! ------------
1353	!> Compute module-specific boundary conditions
1354	!------------------------------------------------------------------------------!
1355	SUBROUTINE module_interface_boundary_conditions
1356
1357
1358	IF ( debug_output_timestep ) CALL debug_message( 'module-specific boundary_conditions', 'start' )
1359
1360	CALL dynamics_boundary_conditions
1361	CALL tcm_boundary_conds
1362
1363	IF ( bulk_cloud_model ) CALL bcm_boundary_conditions
1364	IF ( air_chemistry ) CALL chem_boundary_conditions
1365	IF ( ocean_mode ) CALL ocean_boundary_conditions
1366	IF ( salsa ) CALL salsa_boundary_conditions
1367
1368	IF ( debug_output_timestep ) CALL debug_message( 'module-specific boundary_conditions', 'end' )
1369
1370
1371	END SUBROUTINE module_interface_boundary_conditions
1372
1373	!------------------------------------------------------------------------------!
1374	! Description:
1375	! ------------
1376	!> Swap the timelevel pointers for module-specific arrays
1377	!------------------------------------------------------------------------------!
1378	SUBROUTINE module_interface_swap_timelevel ( swap_mode )
1379
1380
1381	INTEGER(iwp), INTENT(IN) :: swap_mode !< determines procedure of pointer swap
1382
1383
1384	IF ( debug_output_timestep ) CALL debug_message( 'module-specific swap timelevel', 'start' )
1385
1386	CALL dynamics_swap_timelevel( swap_mode )
1387	CALL tcm_swap_timelevel( swap_mode )
1388
1389	IF ( bulk_cloud_model ) CALL bcm_swap_timelevel( swap_mode )
1390	IF ( air_chemistry ) CALL chem_swap_timelevel( swap_mode )
1391	IF ( gust_module_enabled ) CALL gust_swap_timelevel( swap_mode )
1392	IF ( land_surface ) CALL lsm_swap_timelevel( swap_mode )
1393	IF ( ocean_mode ) CALL ocean_swap_timelevel( swap_mode )
1394	IF ( salsa ) CALL salsa_swap_timelevel( swap_mode )
1395	IF ( urban_surface ) CALL usm_swap_timelevel( swap_mode )
1396
1397	IF ( debug_output_timestep ) CALL debug_message( 'module-specific swap timelevel', 'end' )
1398
1399
1400	END SUBROUTINE module_interface_swap_timelevel
1401
1402
1403	!------------------------------------------------------------------------------!
1404	!
1405	! Description:
1406	! ------------
1407	!> Perform module-specific averaging of 3D data
1408	!------------------------------------------------------------------------------!
1409	SUBROUTINE module_interface_3d_data_averaging( mode, variable )
1410
1411
1412	CHARACTER (LEN=*), INTENT(IN) :: mode !< averaging interface mode
1413	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
1414
1415
1416	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 3d data averaging', 'start' )
1417
1418	CALL dynamics_3d_data_averaging( mode, variable )
1419	CALL tcm_3d_data_averaging( mode, variable )
1420
1421	IF ( biometeorology ) CALL bio_3d_data_averaging( mode, variable )
1422	IF ( bulk_cloud_model ) CALL bcm_3d_data_averaging( mode, variable )
1423	IF ( air_chemistry ) CALL chem_3d_data_averaging( mode, variable )
1424	CALL doq_3d_data_averaging( mode, variable ) ! ToDo: this seems to be not according to the design
1425	IF ( gust_module_enabled ) CALL gust_3d_data_averaging( mode, variable )
1426	IF ( land_surface ) CALL lsm_3d_data_averaging( mode, variable )
1427	IF ( ocean_mode ) CALL ocean_3d_data_averaging( mode, variable )
1428	IF ( plant_canopy ) CALL pcm_3d_data_averaging( mode, variable )
1429	IF ( radiation ) CALL radiation_3d_data_averaging( mode, variable )
1430	IF ( salsa ) CALL salsa_3d_data_averaging( mode, variable )
1431	IF ( urban_surface ) CALL usm_3d_data_averaging( mode, variable )
1432
1433	IF ( user_module_enabled ) CALL user_3d_data_averaging( mode, variable )
1434
1435	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 3d data averaging', 'end' )
1436
1437
1438	END SUBROUTINE module_interface_3d_data_averaging
1439
1440	!------------------------------------------------------------------------------!
1441	!
1442	! Description:
1443	! ------------
1444	!> Define module-specific 2D output variables
1445	!------------------------------------------------------------------------------!
1446	SUBROUTINE module_interface_data_output_2d( av, variable, found, grid, mode, &
1447	local_pf, two_d, nzb_do, nzt_do, &
1448	fill_value )
1449
1450	INTEGER(iwp), INTENT(IN) :: av !< flag for (non-)average output
1451	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
1452	LOGICAL, INTENT(INOUT) :: found !< flag if output variable is found
1453	CHARACTER (LEN=*), INTENT(INOUT) :: grid !< name of vertical grid
1454	CHARACTER (LEN=*), INTENT(IN) :: mode !< either 'xy', 'xz' or 'yz'
1455	LOGICAL, INTENT(OUT) :: two_d !< flag for 2D variables
1456	INTEGER(iwp), INTENT(IN) :: nzb_do !< vertical output index (bottom) (usually 0)
1457	INTEGER(iwp), INTENT(IN) :: nzt_do !< vertical output index (top) (usually nz_do3d)
1458	REAL(wp), INTENT(IN) :: fill_value !< to be removed
1459
1460	REAL(wp), DIMENSION(nxl:nxr,nys:nyn,nzb_do:nzt_do), INTENT(INOUT) :: local_pf !< ToDo: can also be kind=sp
1461
1462
1463	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 2d data output', 'start' )
1464
1465	CALL dynamics_data_output_2d( &
1466	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do, fill_value &
1467	)
1468
1469	IF ( .NOT. found ) THEN
1470	CALL tcm_data_output_2d( &
1471	av, variable, found, grid, mode, local_pf, nzb_do, nzt_do &
1472	)
1473	ENDIF
1474
1475	IF ( .NOT. found .AND. biometeorology ) THEN
1476	CALL bio_data_output_2d( &
1477	av, variable, found, grid, local_pf, two_d, nzb_do, nzt_do &
1478	)
1479	ENDIF
1480
1481	IF ( .NOT. found .AND. bulk_cloud_model ) THEN
1482	CALL bcm_data_output_2d( &
1483	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do&
1484	)
1485	ENDIF
1486
1487	IF ( .NOT. found .AND. air_chemistry ) THEN
1488	CALL chem_data_output_2d( &
1489	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do, fill_value &
1490	)
1491	ENDIF
1492
1493	IF ( .NOT. found ) THEN
1494	CALL doq_output_2d( &
1495	av, variable, found, grid, mode, local_pf, two_d, &
1496	nzb_do, nzt_do, fill_value )
1497	ENDIF
1498
1499	IF ( .NOT. found .AND. gust_module_enabled ) THEN
1500	CALL gust_data_output_2d( &
1501	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do, fill_value &
1502	)
1503	ENDIF
1504
1505	IF ( .NOT. found .AND. land_surface ) THEN
1506	CALL lsm_data_output_2d( &
1507	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do&
1508	)
1509	ENDIF
1510
1511	IF ( .NOT. found .AND. ocean_mode ) THEN
1512	CALL ocean_data_output_2d( &
1513	av, variable, found, grid, mode, local_pf, nzb_do, nzt_do &
1514	)
1515	ENDIF
1516
1517	IF ( .NOT. found .AND. radiation ) THEN
1518	CALL radiation_data_output_2d( &
1519	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do&
1520	)
1521	ENDIF
1522
1523	IF ( .NOT. found .AND. salsa ) THEN
1524	CALL salsa_data_output_2d( &
1525	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do&
1526	)
1527	ENDIF
1528
1529	IF ( .NOT. found .AND. user_module_enabled ) THEN
1530	CALL user_data_output_2d( &
1531	av, variable, found, grid, local_pf, two_d, nzb_do, nzt_do &
1532	)
1533	ENDIF
1534
1535	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 2d data output', 'end' )
1536
1537
1538	END SUBROUTINE module_interface_data_output_2d
1539
1540
1541	!------------------------------------------------------------------------------!
1542	!
1543	! Description:
1544	! ------------
1545	!> Define module-specific 3D output variables
1546	!------------------------------------------------------------------------------!
1547	SUBROUTINE module_interface_data_output_3d( av, variable, found, local_pf, &
1548	fill_value, resorted, nzb_do, nzt_do )
1549
1550
1551	INTEGER(iwp), INTENT(IN) :: av !< flag for (non-)average output
1552	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
1553	LOGICAL, INTENT(INOUT) :: found !< flag if output variable is found
1554	REAL(wp), INTENT(IN) :: fill_value !< ToDo: refactor
1555	LOGICAL, INTENT(OUT) :: resorted !< flag if output has been resorted
1556	INTEGER(iwp), INTENT(IN) :: nzb_do !< vertical output index (bottom) (usually 0)
1557	INTEGER(iwp), INTENT(IN) :: nzt_do !< vertical output index (top) (usually nz_do3d)
1558
1559	REAL(sp), DIMENSION(nxl:nxr,nys:nyn,nzb_do:nzt_do), INTENT(INOUT) :: local_pf
1560
1561
1562	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 3d data output', 'start' )
1563
1564	CALL dynamics_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1565	resorted = .FALSE.
1566
1567	IF ( .NOT. found ) THEN
1568	CALL tcm_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1569	resorted = .TRUE.
1570	ENDIF
1571
1572	IF ( .NOT. found .AND. biometeorology ) THEN
1573	CALL bio_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1574	resorted = .FALSE.
1575	ENDIF
1576
1577	IF ( .NOT. found .AND. bulk_cloud_model ) THEN
1578	CALL bcm_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1579	resorted = .TRUE.
1580	ENDIF
1581
1582	IF ( .NOT. found .AND. air_chemistry ) THEN
1583	CALL chem_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1584	resorted = .TRUE.
1585	ENDIF
1586
1587	IF ( .NOT. found ) THEN
1588	CALL doq_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1589	resorted = .TRUE.
1590	ENDIF
1591
1592	IF ( .NOT. found .AND. gust_module_enabled ) THEN
1593	CALL gust_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1594	resorted = .TRUE.
1595	ENDIF
1596
1597	IF ( .NOT. found .AND. indoor_model ) THEN
1598	CALL im_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1599	resorted = .TRUE.
1600	ENDIF
1601
1602	IF ( .NOT. found .AND. ocean_mode ) THEN
1603	CALL ocean_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1604	resorted = .TRUE.
1605	ENDIF
1606
1607	IF ( .NOT. found .AND. plant_canopy ) THEN
1608	CALL pcm_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
1609	resorted = .TRUE.
1610	ENDIF
1611
1612	IF ( .NOT. found .AND. radiation ) THEN
1613	CALL radiation_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1614	resorted = .TRUE.
1615	ENDIF
1616
1617	IF ( .NOT. found .AND. salsa ) THEN
1618	CALL salsa_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1619	resorted = .TRUE.
1620	ENDIF
1621
1622	IF ( .NOT. found .AND. user_module_enabled ) THEN
1623	CALL user_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
1624	resorted = .TRUE.
1625	ENDIF
1626
1627	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 3d data output', 'end' )
1628
1629
1630	END SUBROUTINE module_interface_data_output_3d
1631
1632
1633	!------------------------------------------------------------------------------!
1634	! Description:
1635	! ------------
1636	!> Compute module-specific profile and timeseries data
1637	!------------------------------------------------------------------------------!
1638	SUBROUTINE module_interface_statistics( mode, sr, tn, dots_max )
1639
1640
1641	CHARACTER (LEN=*), INTENT(IN) :: mode !< statistical analysis mode
1642	INTEGER(iwp), INTENT(IN) :: sr !<
1643	INTEGER(iwp), INTENT(IN) :: tn !<
1644	INTEGER(iwp), INTENT(IN) :: dots_max !< maximum number of timeseries
1645
1646
1647	IF ( debug_output_timestep ) CALL debug_message( 'module-specific statistics', 'start' )
1648
1649	CALL dynamics_statistics( mode, sr, tn )
1650
1651	IF ( gust_module_enabled ) CALL gust_statistics( mode, sr, tn, dots_max )
1652	IF ( air_chemistry ) CALL chem_statistics( mode, sr, tn )
1653	IF ( salsa ) CALL salsa_statistics( mode, sr, tn )
1654
1655	IF ( user_module_enabled ) CALL user_statistics( mode, sr, tn )
1656
1657	IF ( debug_output_timestep ) CALL debug_message( 'module-specific statistics', 'end' )
1658
1659
1660	END SUBROUTINE module_interface_statistics
1661
1662
1663	!------------------------------------------------------------------------------!
1664	! Description:
1665	! ------------
1666	!> Read module-specific restart data globaly shared by all MPI ranks
1667	!------------------------------------------------------------------------------!
1668	SUBROUTINE module_interface_rrd_global( found )
1669
1670
1671	LOGICAL, INTENT(INOUT) :: found !< flag if variable was found
1672
1673
1674	IF ( debug_output ) CALL debug_message( 'module-specific read global restart data', 'start' )
1675
1676	CALL dynamics_rrd_global( found ) ! ToDo: change interface to pass variable
1677
1678	IF ( .NOT. found ) CALL bio_rrd_global( found ) ! ToDo: change interface to pass variable
1679	IF ( .NOT. found ) CALL bcm_rrd_global( found ) ! ToDo: change interface to pass variable
1680	IF ( .NOT. found ) CALL flight_rrd_global( found ) ! ToDo: change interface to pass variable
1681	IF ( .NOT. found ) CALL gust_rrd_global( found ) ! ToDo: change interface to pass variable
1682	IF ( .NOT. found ) CALL lpm_rrd_global( found ) ! ToDo: change interface to pass variable
1683	IF ( .NOT. found ) CALL ocean_rrd_global( found ) ! ToDo: change interface to pass variable
1684	IF ( .NOT. found ) CALL stg_rrd_global ( found ) ! ToDo: change interface to pass variable
1685	IF ( .NOT. found ) CALL wtm_rrd_global( found ) ! ToDo: change interface to pass variable
1686	IF ( .NOT. found ) CALL surface_data_output_rrd_global( found )
1687
1688	IF ( .NOT. found ) CALL user_rrd_global( found ) ! ToDo: change interface to pass variable
1689
1690	IF ( debug_output ) CALL debug_message( 'module-specific read global restart data', 'end' )
1691
1692
1693	END SUBROUTINE module_interface_rrd_global
1694
1695
1696	!------------------------------------------------------------------------------!
1697	! Description:
1698	! ------------
1699	!> Write module-specific restart data globaly shared by all MPI ranks
1700	!------------------------------------------------------------------------------!
1701	SUBROUTINE module_interface_wrd_global
1702
1703
1704	IF ( debug_output ) CALL debug_message( 'module-specific write global restart data', 'start' )
1705
1706	CALL dynamics_wrd_global
1707
1708	IF ( biometeorology ) CALL bio_wrd_global
1709	IF ( bulk_cloud_model ) CALL bcm_wrd_global
1710	IF ( virtual_flight ) CALL flight_wrd_global
1711	IF ( gust_module_enabled ) CALL gust_wrd_global
1712	IF ( ocean_mode ) CALL ocean_wrd_global
1713	IF ( syn_turb_gen ) CALL stg_wrd_global
1714	IF ( wind_turbine ) CALL wtm_wrd_global
1715	IF ( surface_output ) CALL surface_data_output_wrd_global
1716
1717	IF ( user_module_enabled ) CALL user_wrd_global
1718
1719	IF ( debug_output ) CALL debug_message( 'module-specific write global restart data', 'end' )
1720
1721
1722	END SUBROUTINE module_interface_wrd_global
1723
1724
1725	!------------------------------------------------------------------------------!
1726	! Description:
1727	! ------------
1728	!> Read module-specific restart data specific to local MPI ranks
1729	!------------------------------------------------------------------------------!
1730	SUBROUTINE module_interface_rrd_local( map_index, &
1731	nxlf, nxlc, nxl_on_file, &
1732	nxrf, nxrc, nxr_on_file, &
1733	nynf, nync, nyn_on_file, &
1734	nysf, nysc, nys_on_file, &
1735	tmp_2d, tmp_3d, found )
1736
1737
1738	INTEGER(iwp), INTENT(IN) :: map_index !<
1739	INTEGER(iwp), INTENT(IN) :: nxlc !<
1740	INTEGER(iwp), INTENT(IN) :: nxlf !<
1741	INTEGER(iwp), INTENT(IN) :: nxl_on_file !<
1742	INTEGER(iwp), INTENT(IN) :: nxrc !<
1743	INTEGER(iwp), INTENT(IN) :: nxrf !<
1744	INTEGER(iwp), INTENT(IN) :: nxr_on_file !<
1745	INTEGER(iwp), INTENT(IN) :: nync !<
1746	INTEGER(iwp), INTENT(IN) :: nynf !<
1747	INTEGER(iwp), INTENT(IN) :: nyn_on_file !<
1748	INTEGER(iwp), INTENT(IN) :: nysc !<
1749	INTEGER(iwp), INTENT(IN) :: nysf !<
1750	INTEGER(iwp), INTENT(IN) :: nys_on_file !<
1751	LOGICAL, INTENT(INOUT) :: found !< flag if variable was found
1752
1753	REAL(wp), &
1754	DIMENSION(nys_on_file-nbgp:nyn_on_file+nbgp,nxl_on_file-nbgp:nxr_on_file+nbgp), &
1755	INTENT(OUT) :: tmp_2d !<
1756	REAL(wp), &
1757	DIMENSION(nzb:nzt+1,nys_on_file-nbgp:nyn_on_file+nbgp,nxl_on_file-nbgp:nxr_on_file+nbgp), &
1758	INTENT(OUT) :: tmp_3d !<
1759
1760
1761	IF ( debug_output ) CALL debug_message( 'module-specific read local restart data', 'start' )
1762
1763	CALL dynamics_rrd_local( &
1764	map_index, &
1765	nxlf, nxlc, nxl_on_file, &
1766	nxrf, nxrc, nxr_on_file, &
1767	nynf, nync, nyn_on_file, &
1768	nysf, nysc, nys_on_file, &
1769	tmp_2d, tmp_3d, found &
1770	) ! ToDo: change interface to pass variable
1771
1772	IF ( .NOT. found ) CALL bio_rrd_local( &
1773	found &
1774	)
1775
1776	IF ( .NOT. found ) CALL bcm_rrd_local( &
1777	map_index, &
1778	nxlf, nxlc, nxl_on_file, &
1779	nxrf, nxrc, nxr_on_file, &
1780	nynf, nync, nyn_on_file, &
1781	nysf, nysc, nys_on_file, &
1782	tmp_2d, tmp_3d, found &
1783	) ! ToDo: change interface to pass variable
1784
1785	IF ( .NOT. found ) CALL chem_rrd_local( &
1786	map_index, &
1787	nxlf, nxlc, nxl_on_file, &
1788	nxrf, nxrc, nxr_on_file, &
1789	nynf, nync, nyn_on_file, &
1790	nysf, nysc, nys_on_file, &
1791	tmp_3d, found &
1792	) ! ToDo: change interface to pass variable
1793
1794	! IF ( .NOT. found ) CALL doq_rrd_local( &
1795	! map_index, &
1796	! nxlf, nxlc, nxl_on_file, &
1797	! nxrf, nxrc, nxr_on_file, &
1798	! nynf, nync, nyn_on_file, &
1799	! nysf, nysc, nys_on_file, &
1800	! tmp_3d_non_standard, found &
1801	! ) ! ToDo: change interface to pass variable CALL doq_wrd_local
1802
1803	IF ( .NOT. found ) CALL gust_rrd_local( &
1804	map_index, &
1805	nxlf, nxlc, nxl_on_file, &
1806	nxrf, nxrc, nxr_on_file, &
1807	nynf, nync, nyn_on_file, &
1808	nysf, nysc, nys_on_file, &
1809	tmp_2d, tmp_3d, found &
1810	) ! ToDo: change interface to pass variable
1811
1812	IF ( .NOT. found ) CALL lpm_rrd_local( &
1813	map_index, &
1814	nxlf, nxlc, nxl_on_file, &
1815	nxrf, nxrc, nxr_on_file, &
1816	nynf, nync, nyn_on_file, &
1817	nysf, nysc, nys_on_file, &
1818	tmp_3d, found &
1819	) ! ToDo: change interface to pass variable
1820
1821	IF ( .NOT. found ) CALL lsm_rrd_local( &
1822	map_index, &
1823	nxlf, nxlc, nxl_on_file, &
1824	nxrf, nxrc, nxr_on_file, &
1825	nynf, nync, nyn_on_file, &
1826	nysf, nysc, nys_on_file, &
1827	tmp_2d, found &
1828	) ! ToDo: change interface to pass variable
1829
1830	IF ( .NOT. found ) CALL pcm_rrd_local( &
1831	map_index, &
1832	nxlf, nxlc, nxl_on_file, &
1833	nxrf, nxrc, nxr_on_file, &
1834	nynf, nync, nyn_on_file, &
1835	nysf, nysc, nys_on_file, &
1836	found &
1837	)
1838
1839	IF ( .NOT. found ) CALL ocean_rrd_local( &
1840	map_index, &
1841	nxlf, nxlc, nxl_on_file, &
1842	nxrf, nxrc, nxr_on_file, &
1843	nynf, nync, nyn_on_file, &
1844	nysf, nysc, nys_on_file, &
1845	tmp_3d, found &
1846	) ! ToDo: change interface to pass variable
1847
1848	IF ( .NOT. found ) CALL radiation_rrd_local( &
1849	map_index, &
1850	nxlf, nxlc, nxl_on_file, &
1851	nxrf, nxrc, nxr_on_file, &
1852	nynf, nync, nyn_on_file, &
1853	nysf, nysc, nys_on_file, &
1854	tmp_2d, tmp_3d, found &
1855	) ! ToDo: change interface to pass variable
1856
1857	IF ( .NOT. found ) CALL salsa_rrd_local( &
1858	map_index, &
1859	nxlf, nxlc, nxl_on_file, &
1860	nxrf, nxrc, nxr_on_file, &
1861	nynf, nync, nyn_on_file, &
1862	nysf, nysc, nys_on_file, &
1863	tmp_3d, found &
1864	) ! ToDo: change interface to pass variable
1865
1866	IF ( .NOT. found ) CALL usm_rrd_local( &
1867	map_index, &
1868	nxlf, nxlc, nxl_on_file, &
1869	nxrf, nxr_on_file, &
1870	nynf, nyn_on_file, &
1871	nysf, nysc, nys_on_file, &
1872	found &
1873	) ! ToDo: change interface to pass variable
1874	!
1875	!-- Surface data do not need overlap data, so do not pass these information.
1876	IF ( .NOT. found ) CALL surface_data_output_rrd_local( found )
1877
1878	IF ( .NOT. found ) CALL user_rrd_local( &
1879	map_index, &
1880	nxlf, nxlc, nxl_on_file, &
1881	nxrf, nxrc, nxr_on_file, &
1882	nynf, nync, nyn_on_file, &
1883	nysf, nysc, nys_on_file, &
1884	tmp_3d, found &
1885	) ! ToDo: change interface to pass variable
1886
1887	IF ( debug_output ) CALL debug_message( 'module-specific read local restart data', 'end' )
1888
1889
1890	END SUBROUTINE module_interface_rrd_local
1891
1892
1893	!------------------------------------------------------------------------------!
1894	! Description:
1895	! ------------
1896	!> Write module-specific restart data specific to local MPI ranks
1897	!------------------------------------------------------------------------------!
1898	SUBROUTINE module_interface_wrd_local
1899
1900
1901	IF ( debug_output ) CALL debug_message( 'module-specific write local restart data', 'start' )
1902
1903	CALL dynamics_wrd_local
1904
1905	IF ( biometeorology ) CALL bio_wrd_local
1906	IF ( bulk_cloud_model ) CALL bcm_wrd_local
1907	IF ( air_chemistry ) CALL chem_wrd_local
1908	CALL doq_wrd_local
1909	IF ( gust_module_enabled ) CALL gust_wrd_local
1910	IF ( particle_advection ) CALL lpm_wrd_local
1911	IF ( land_surface ) CALL lsm_wrd_local
1912	IF ( plant_canopy ) CALL pcm_wrd_local
1913	IF ( ocean_mode ) CALL ocean_wrd_local
1914	IF ( radiation ) CALL radiation_wrd_local
1915	IF ( salsa ) CALL salsa_wrd_local
1916	IF ( urban_surface ) CALL usm_wrd_local
1917	IF ( surface_output ) CALL surface_data_output_wrd_local
1918
1919	IF ( user_module_enabled ) CALL user_wrd_local
1920
1921	IF ( debug_output ) CALL debug_message( 'module-specific write local restart data', 'end' )
1922
1923
1924	END SUBROUTINE module_interface_wrd_local
1925
1926
1927	!------------------------------------------------------------------------------!
1928	! Description:
1929	! ------------
1930	!> Perform module-specific last actions before the program terminates
1931	!------------------------------------------------------------------------------!
1932	SUBROUTINE module_interface_last_actions
1933
1934	INTEGER :: return_value !< returned status value of a called function
1935
1936
1937	IF ( debug_output ) CALL debug_message( 'module-specific last actions', 'start' )
1938
1939	return_value = dom_finalize_output()
1940
1941	CALL dynamics_last_actions
1942
1943	IF ( user_module_enabled ) CALL user_last_actions
1944
1945	IF ( debug_output ) CALL debug_message( 'module-specific last actions', 'end' )
1946
1947
1948	END SUBROUTINE module_interface_last_actions
1949
1950
1951	END MODULE module_interface

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |