!> @file message.f90 !------------------------------------------------------------------------------! ! This file is part of the PALM model system. ! ! PALM is free software: you can redistribute it and/or modify it under the ! terms of the GNU General Public License as published by the Free Software ! Foundation, either version 3 of the License, or (at your option) any later ! version. ! ! PALM is distributed in the hope that it will be useful, but WITHOUT ANY ! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR ! A PARTICULAR PURPOSE. See the GNU General Public License for more details. ! ! You should have received a copy of the GNU General Public License along with ! PALM. If not, see . ! ! Copyright 1997-2019 Leibniz Universitaet Hannover !------------------------------------------------------------------------------! ! ! Current revisions: ! ----------------- ! ! ! Former revisions: ! ----------------- ! $Id: message.f90 3885 2019-04-11 11:29:34Z gronemeier $ ! Changes related to global restructuring of location messages and introduction ! of additional debug messages ! ! 3655 2019-01-07 16:51:22Z knoop ! Minor formating changes ! ! 3247 2018-09-14 07:06:30Z sward ! Subroutine description updated and parin_fail_message now also outputs ! the line number in which namelist reading failed ! ! 3246 2018-09-13 15:14:50Z sward ! Added SUBROUTINE parin_fail_message for error handling of input namelists ! ! 3241 2018-09-12 15:02:00Z raasch ! unused variables removed ! ! 3019 2018-05-13 07:05:43Z maronga ! Temporaraly deactivate MPI_BARRIER as long as nested systems freeze due to ! asynchronous calls of location_message. ! ! 2961 2018-04-12 10:13:48Z suehring ! Synchronize location message between parent and child. Message will be not ! flushed before all models finished their respective task. ! ! 2932 2018-03-26 09:39:22Z maronga ! Corrected "Former revisions" section ! ! 2696 2017-12-14 17:12:51Z kanani ! Change in file header (GPL part) ! ! 2101 2017-01-05 16:42:31Z suehring ! ! 2000 2016-08-20 18:09:15Z knoop ! Forced header and separation lines into 80 columns ! ! 1808 2016-04-05 19:44:00Z raasch ! routine local_flush replaced by FORTRAN statement ! ! 1764 2016-02-28 12:45:19Z raasch ! nest id added to header string, add linefeed to stdout to get messages better ! seperated from the location messages, ! in case of nested runs, location messages are given only by the root domain ! ! 1682 2015-10-07 23:56:08Z knoop ! Code annotations made doxygen readable ! ! 1664 2015-09-23 06:18:12Z knoop ! updated information_string_2 to meet the new server structure ! ! 1402 2014-05-09 14:25:13Z raasch ! formatting of messages modified ! ! 1384 2014-05-02 14:31:06Z raasch ! routine location_message added ! ! 1320 2014-03-20 08:40:49Z raasch ! ONLY-attribute added to USE-statements, ! kind-parameters added to all INTEGER and REAL declaration statements, ! revision history before 2012 removed, ! comment fields (!:) to be used for variable explanations added to ! all variable declaration statements ! ! 1036 2012-10-22 13:43:42Z raasch ! code put under GPL (PALM 3.9) ! ! 213 2008-11-13 10:26:18Z raasch ! Initial revision ! ! Description: ! ------------ !> Handling of the different kinds of messages. !> Meaning of formal parameters: !> requested_action: 0 - continue, 1 - abort by stop, 2 - abort by mpi_abort !> 3 - abort by mpi_abort using MPI_COMM_WORLD !> message_level: 0 - informative, 1 - warning, 2 - error !> output_on_pe: -1 - all, else - output on specified PE !> file_id: 6 - stdout (*) !> flush_file: 0 - no action, 1 - flush the respective output buffer !------------------------------------------------------------------------------! SUBROUTINE message( routine_name, message_identifier, requested_action, & message_level, output_on_pe, file_id, flush_file ) USE control_parameters, & ONLY: abort_mode, message_string USE kinds USE pegrid USE pmc_interface, & ONLY: cpl_id, nested_run IMPLICIT NONE CHARACTER(LEN=6) :: message_identifier !< CHARACTER(LEN=20) :: nest_string !< nest id information CHARACTER(LEN=*) :: routine_name !< CHARACTER(LEN=200) :: header_string !< CHARACTER(LEN=200) :: information_string_1 !< CHARACTER(LEN=200) :: information_string_2 !< INTEGER(iwp) :: file_id !< INTEGER(iwp) :: flush_file !< INTEGER(iwp) :: i !< INTEGER(iwp) :: message_level !< INTEGER(iwp) :: output_on_pe !< INTEGER(iwp) :: requested_action !< LOGICAL :: do_output !< LOGICAL :: pe_out_of_range !< do_output = .FALSE. pe_out_of_range = .FALSE. ! !-- In case of nested runs create the nest id informations IF ( nested_run ) THEN WRITE( nest_string, '(1X,A,I2.2)' ) 'from nest-id ', cpl_id ELSE nest_string = '' ENDIF ! !-- Create the complete output string, starting with the message level IF ( message_level == 0 ) THEN header_string = '--- informative message' // TRIM(nest_string) // & ' --- ID:' ELSEIF ( message_level == 1 ) THEN header_string = '+++ warning message' // TRIM(nest_string) // ' --- ID:' ELSEIF ( message_level == 2 ) THEN header_string = '+++ error message' // TRIM(nest_string) // ' --- ID:' ELSE WRITE( header_string,'(A,I2)' ) '+++ unknown message level' // & TRIM(nest_string) // ': ', & message_level ENDIF ! !-- Add the message identifier and the generating routine header_string = TRIM( header_string ) // ' ' // message_identifier // & ' generated by routine: ' // TRIM( routine_name ) information_string_1 = 'Further information can be found at' IF(message_identifier(1:2) == 'NC') THEN information_string_2 = 'http://palm.muk.uni-hannover.de/trac/wiki/doc' // & '/app/errmsg#NC' ELSE information_string_2 = 'http://palm.muk.uni-hannover.de/trac/wiki/doc' // & '/app/errmsg#' // message_identifier ENDIF ! !-- Output the output string and the corresponding message string which had !-- been already assigned in the calling subroutine. ! !-- First find out if output shall be done on this PE. IF ( output_on_pe == -1 ) THEN do_output = .TRUE. ELSEIF ( myid == output_on_pe ) THEN do_output = .TRUE. ENDIF #if defined( __parallel ) ! !-- In case of illegal pe number output on pe0 IF ( output_on_pe > numprocs-1 ) THEN pe_out_of_range = .TRUE. IF ( myid == 0 ) do_output = .TRUE. ENDIF #endif ! !-- Now do the output IF ( do_output ) THEN IF ( file_id == 6 ) THEN ! !-- Output on stdout WRITE( *, '(6X,A)' ) TRIM( header_string ) ! !-- Cut message string into pieces and output one piece per line. !-- Remove leading blanks. message_string = ADJUSTL( message_string ) i = INDEX( message_string, '&' ) DO WHILE ( i /= 0 ) WRITE( *, '(4X,A)' ) ADJUSTL( message_string(1:i-1) ) message_string = ADJUSTL( message_string(i+1:) ) i = INDEX( message_string, '&' ) ENDDO WRITE( *, '(10X,A)' ) '' WRITE( *, '(10X,A)' ) TRIM( message_string ) WRITE( *, '(10X,A)' ) '' WRITE( *, '(10X,A)' ) TRIM( information_string_1 ) WRITE( *, '(10X,A)' ) TRIM( information_string_2 ) WRITE( *, '(10X,A)' ) '' ELSE ! !-- Output on requested file id (file must have been opened elsewhere!) WRITE( file_id, '(A/)' ) TRIM( header_string ) ! !-- Cut message string into pieces and output one piece per line. !-- Remove leading blanks. message_string = ADJUSTL( message_string ) i = INDEX( message_string, '&' ) DO WHILE ( i /= 0 ) WRITE( file_id, '(4X,A)' ) ADJUSTL( message_string(1:i-1) ) message_string = ADJUSTL( message_string(i+1:) ) i = INDEX( message_string, '&' ) ENDDO WRITE( file_id, '(4X,A)' ) TRIM( message_string ) WRITE( file_id, '(4X,A)' ) '' WRITE( file_id, '(4X,A)' ) TRIM( information_string_1 ) WRITE( file_id, '(4X,A)' ) TRIM( information_string_2 ) WRITE( file_id, '(4X,A)' ) '' ! !-- Flush buffer, if requested IF ( flush_file == 1 ) FLUSH( file_id ) ENDIF IF ( pe_out_of_range ) THEN WRITE ( *, '(A)' ) '+++ WARNING from routine message:' WRITE ( *, '(A,I6,A)' ) ' PE ', output_on_pe, & ' choosed for output is larger ' WRITE ( *, '(A,I6)' ) ' than the maximum number of used PEs', & numprocs-1 WRITE ( *, '(A)' ) ' Output is done on PE0 instead' ENDIF ENDIF ! !-- Abort execution, if requested IF ( requested_action > 0 ) THEN abort_mode = requested_action CALL local_stop ENDIF END SUBROUTINE message !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> Prints out the given location on stdout !--------------------------------------------------------------------------------------------------! SUBROUTINE location_message( location, message_type ) USE, INTRINSIC :: ISO_FORTRAN_ENV, & ONLY: OUTPUT_UNIT USE pegrid USE pmc_interface, & ONLY: cpl_id IMPLICIT NONE CHARACTER(LEN=*) :: location !< text to be output on stdout CHARACTER(LEN=*) :: message_type !< attribute marking 'start' or 'end' of routine CHARACTER(LEN=11) :: message_type_string = ' ' !< CHARACTER(LEN=10) :: system_time !< system clock time CHARACTER(LEN=10) :: time ! !-- Output for nested runs only on the root domain IF ( cpl_id /= 1 ) RETURN IF ( myid == 0 ) THEN ! !-- Get system time for debug info output (helpful to estimate the required computing time for !-- specific parts of code CALL date_and_time( TIME=time ) system_time = time(1:2)//':'//time(3:4)//':'//time(5:6) ! !-- Write pre-string depending on message_type IF ( TRIM( message_type ) == 'start' ) WRITE( message_type_string, * ) '-', TRIM( message_type ), '----' IF ( TRIM( message_type ) == 'finished' ) WRITE( message_type_string, * ) '-', TRIM( message_type ), '-' ! !-- Write and flush debug location or info message to file WRITE( OUTPUT_UNIT, 200 ) TRIM( message_type_string ), TRIM( location ), TRIM( system_time ) FLUSH( OUTPUT_UNIT ) ! !-- Message formats 200 FORMAT ( 3X, A, ' ', A, ' | System time: ', A ) ENDIF END SUBROUTINE location_message !--------------------------------------------------------------------------------------------------! ! Description: ! ------------ !> Prints out the given debug information to unit 9 (DEBUG files in temporary directory) !> for each PE on each domain. !--------------------------------------------------------------------------------------------------! SUBROUTINE debug_message( debug_string, message_type ) USE control_parameters, & ONLY: current_timestep_number IMPLICIT NONE CHARACTER(LEN=*) :: debug_string !< debug message to be output on unit 9 CHARACTER(LEN=*) :: message_type !< 'start', 'end', 'info' CHARACTER(LEN=10) :: message_type_string = ' ' !< CHARACTER(LEN=10) :: system_time !< system clock time CHARACTER(LEN=10) :: time INTEGER, PARAMETER :: debug_output_unit = 9 ! !-- Get system time for debug info output (helpful to estimate the required computing time for !-- specific parts of code CALL date_and_time( TIME=time ) system_time = time(1:2)//':'//time(3:4)//':'//time(5:6) ! !-- Write pre-string depending on message_type IF ( TRIM( message_type ) == 'start' ) WRITE( message_type_string, * ) '-', TRIM( message_type ), '-' IF ( TRIM( message_type ) == 'end' ) WRITE( message_type_string, * ) '-', TRIM( message_type ), '---' IF ( TRIM( message_type ) == 'info' ) WRITE( message_type_string, * ) '-', TRIM( message_type ), '--' ! !-- Write and flush debug location or info message to file WRITE( debug_output_unit, 201 ) TRIM( system_time ), current_timestep_number, TRIM( message_type_string ), TRIM( debug_string ) FLUSH( debug_output_unit ) ! !-- Message formats 201 FORMAT ( 'System time: ', A, ' | timestep: ', I6, ' | ', A, ' ', A ) END SUBROUTINE debug_message !------------------------------------------------------------------------------! ! Description: ! ------------ !> Abort routine for failures durin reading of namelists !------------------------------------------------------------------------------! SUBROUTINE parin_fail_message( location, line ) USE control_parameters, & ONLY: message_string USE kinds IMPLICIT NONE CHARACTER(LEN=*) :: location !< text to be output on stdout CHARACTER(LEN=*) :: line CHARACTER(LEN=80) :: line_dum INTEGER(iwp) :: line_counter line_dum = ' ' line_counter = 0 REWIND( 11 ) DO WHILE ( INDEX( line_dum, TRIM(line) ) == 0 ) READ ( 11, '(A)', END=20 ) line_dum line_counter = line_counter + 1 ENDDO 20 WRITE( message_string, '(A,I3,A)' ) & 'Error(s) in NAMELIST '// TRIM(location) // & '&Reading fails on line ', line_counter, & ' at&' // line CALL message( 'parin', 'PA0271', 1, 2, 0, 6, 0 ) END SUBROUTINE parin_fail_message