!> @file land_surface_model_mod.f90 !------------------------------------------------------------------------------! ! This file is part of the PALM model system. ! ! PALM is free software: you can redistribute it and/or modify it under the ! terms of the GNU General Public License as published by the Free Software ! Foundation, either version 3 of the License, or (at your option) any later ! version. ! ! PALM is distributed in the hope that it will be useful, but WITHOUT ANY ! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR ! A PARTICULAR PURPOSE. See the GNU General Public License for more details. ! ! You should have received a copy of the GNU General Public License along with ! PALM. If not, see . ! ! Copyright 1997-2018 Leibniz Universitaet Hannover !------------------------------------------------------------------------------! ! ! Current revisions: ! ----------------- ! ! ! Former revisions: ! ----------------- ! $Id: land_surface_model_mod.f90 2805 2018-02-14 17:00:09Z kanani $ ! Bugfix in initialization of roughness over water surfaces ! ! 2798 2018-02-09 17:16:39Z suehring ! Minor bugfix for initialization of pt_surface ! ! 2797 2018-02-08 13:24:35Z suehring ! Move output of ghf to general 2D output to output ghf also at urban-type ! surfaces. ! Move restart data of ghf_av to read/write_3d_binary, as this is not a ! exclusively LSM variable anymore. ! ! 2765 2018-01-22 11:34:58Z maronga ! Major bugfix in calculation of f_shf for vertical surfaces ! ! 2735 2018-01-11 12:01:27Z suehring ! output of r_a moved from land-surface to consider also urban-type surfaces ! ! 2729 2018-01-09 11:22:28Z maronga ! Separated deep soil temperature from soil_temperature array ! ! 2724 2018-01-05 12:12:38Z maronga ! Added security check for insufficient soil_temperature values ! ! 2723 2018-01-05 09:27:03Z maronga ! Bugfix for spinups (end_time was increased twice in case of LSM + USM runs) ! ! 2718 2018-01-02 08:49:38Z maronga ! Corrected "Former revisions" section ! ! 2707 2017-12-18 18:34:46Z suehring ! Changes from last commit documented ! ! 2706 2017-12-18 18:33:49Z suehring ! Bugfix, read surface temperature in case of restart runs. ! ! 2705 2017-12-18 11:26:23Z maronga ! Bugfix in binary output (wrong sequence) ! ! 2696 2017-12-14 17:12:51Z kanani ! Change in file header (GPL part) ! Bugfix: missing USE statement for calc_mean_profile ! do not write surface temperatures onto pt array as this might cause ! problems with nesting (MS) ! Revised calculation of pt1 and qv1 (now done in surface_layer_fluxes). Bugfix ! in calculation of surface density (cannot be done via an surface non-air ! temperature) (BM) ! Bugfix: g_d was NaN for non-vegetaed surface types (BM) ! Bugfix initialization of c_veg and lai ! Revise data output to enable _FillValues ! Bugfix in calcultion of r_a and rad_net_l (MS) ! Bugfix: rad_net is not updated in case of radiation_interaction and must thu ! be calculated again from the radiative fluxes ! Temporary fix for cases where no soil model is used on some PEs (BM) ! Revised input and initialization of soil and surface paramters ! pavement_depth is variable for each surface element ! radiation quantities belong to surface type now ! surface fractions initialized ! Rename lsm_last_actions into lsm_write_restart_data (MS) ! ! 2608 2017-11-13 14:04:26Z schwenkel ! Calculation of magnus equation in external module (diagnostic_quantities_mod). ! Adjust calculation of vapor pressure and saturation mixing ratio that it is ! consistent with formulations in other parts of PALM. ! ! 2575 2017-10-24 09:57:58Z maronga ! Pavement parameterization revised ! ! 2573 2017-10-20 15:57:49Z scharf ! bugfixes in last_actions ! ! 2548 2017-10-16 13:18:20Z suehring ! extended by cloud_droplets option ! ! 2532 2017-10-11 16:00:46Z scharf ! bugfixes in data_output_3d ! ! 2516 2017-10-04 11:03:04Z suehring ! Remove tabs ! ! 2514 2017-10-04 09:52:37Z suehring ! upper bounds of cross section and 3d output changed from nx+1,ny+1 to nx,ny ! no output of ghost layer data ! ! 2504 2017-09-27 10:36:13Z maronga ! Support roots and water under pavement. Added several pavement types. ! ! 2476 2017-09-18 07:54:32Z maronga ! Bugfix for last commit ! ! 2475 2017-09-18 07:42:36Z maronga ! Bugfix: setting of vegetation_pars for bare soil corrected. ! ! 2354 2017-08-17 10:49:36Z schwenkel ! minor bugfixes ! ! 2340 2017-08-07 17:11:13Z maronga ! Revised root_distribution tabel and implemented a pseudo-generic root fraction ! calculation ! ! 2333 2017-08-04 09:08:26Z maronga ! minor bugfixes ! ! 2332 2017-08-03 21:15:22Z maronga ! bugfix in pavement_pars ! ! 2328 2017-08-03 12:34:22Z maronga ! Revised skin layer concept. ! Bugfix for runs with pavement surface and humidity ! Revised some standard values in vegetation_pars ! Added emissivity and default albedo_type as variable to tables ! Changed default surface type to vegetation ! Revised input of soil layer configuration ! ! 2307 2017-07-07 11:32:10Z suehring ! Bugfix, variable names corrected ! ! 2299 2017-06-29 10:14:38Z maronga ! Removed pt_p from USE statement. Adjusted call to lsm_soil_model to allow ! spinups without soil moisture prediction ! ! 2298 2017-06-29 09:28:18Z raasch ! type of write_binary changed from CHARACTER to LOGICAL ! ! 2296 2017-06-28 07:53:56Z maronga ! Bugfix in calculation of bare soil heat capacity. ! Bugfix in calculation of shf ! Added support for spinups ! ! 2282 2017-06-13 11:38:46Z schwenkel ! Bugfix for check of saturation moisture ! ! 2273 2017-06-09 12:46:06Z sward ! Error number changed ! ! 2270 2017-06-09 12:18:47Z maronga ! Revised parameterization of heat conductivity between skin layer and soil. ! Temperature and moisture are now defined at the center of the layers. ! Renamed veg_type to vegetation_type and pave_type to pavement_type_name ! Renamed and reduced the number of look-up tables (vegetation_pars, soil_pars) ! Revised land surface model initialization ! Removed output of shf_eb and qsws_eb and removed _eb throughout code ! Removed Clapp & Hornberger parameterization ! ! 2249 2017-06-06 13:58:01Z sward ! ! 2248 2017-06-06 13:52:54Z sward $ ! Error no changed ! ! 2246 2017-06-06 13:09:34Z sward ! Error no changed ! ! Changed soil configuration to 8 layers. The number of soil layers is now ! freely adjustable via the NAMELIST. ! ! 2237 2017-05-31 10:34:53Z suehring ! Bugfix in write restart data ! ! 2233 2017-05-30 18:08:54Z suehring ! ! 2232 2017-05-30 17:47:52Z suehring ! Adjustments to new topography and surface concept ! - now, also vertical walls are possible ! - for vertical walls, parametrization of r_a (aerodynamic resisistance) is ! implemented. ! ! Add check for soil moisture, it must not exceed its saturation value. ! ! 2149 2017-02-09 16:57:03Z scharf ! Land surface parameters II corrected for vegetation_type 18 and 19 ! ! 2031 2016-10-21 15:11:58Z knoop ! renamed variable rho to rho_ocean ! ! 2000 2016-08-20 18:09:15Z knoop ! Forced header and separation lines into 80 columns ! ! 1978 2016-07-29 12:08:31Z maronga ! Bugfix: initial values of pave_surface and water_surface were not set. ! ! 1976 2016-07-27 13:28:04Z maronga ! Parts of the code have been reformatted. Use of radiation model output is ! generalized and simplified. Added more output quantities due to modularization ! ! 1972 2016-07-26 07:52:02Z maronga ! Further modularization: output of cross sections and 3D data is now done in this ! module. Moreover, restart data is written and read directly within this module. ! ! ! 1966 2016-07-18 11:54:18Z maronga ! Bugfix: calculation of m_total in soil model was not set to zero at model start ! ! 1949 2016-06-17 07:19:16Z maronga ! Bugfix: calculation of qsws_soil_eb with precipitation = .TRUE. gave ! qsws_soil_eb = 0 due to a typo ! ! 1856 2016-04-13 12:56:17Z maronga ! Bugfix: for water surfaces, the initial water surface temperature is set equal ! to the intital skin temperature. Moreover, the minimum value of r_a is now ! 1.0 to avoid too large fluxes at the first model time step ! ! 1849 2016-04-08 11:33:18Z hoffmann ! prr moved to arrays_3d ! ! 1826 2016-04-07 12:01:39Z maronga ! Cleanup after modularization ! ! 1817 2016-04-06 15:44:20Z maronga ! Added interface for lsm_init_arrays. Added subroutines for check_parameters, ! header, and parin. Renamed some subroutines. ! ! 1788 2016-03-10 11:01:04Z maronga ! Bugfix: calculate lambda_surface based on temperature gradient between skin ! layer and soil layer instead of Obukhov length ! Changed: moved calculation of surface specific humidity to energy balance solver ! New: water surfaces are available by using a fixed sea surface temperature. ! The roughness lengths are calculated dynamically using the Charnock ! parameterization. This involves the new roughness length for moisture z0q. ! New: modified solution of the energy balance solver and soil model for ! paved surfaces (i.e. asphalt concrete). ! Syntax layout improved. ! Changed: parameter dewfall removed. ! ! 1783 2016-03-06 18:36:17Z raasch ! netcdf variables moved to netcdf module ! ! 1757 2016-02-22 15:49:32Z maronga ! Bugfix: set tm_soil_m to zero after allocation. Added parameter ! unscheduled_radiation_calls to control calls of the radiation model based on ! the skin temperature change during one time step (preliminary version). Set ! qsws_soil_eb to zero at model start (previously set to qsws_eb). Removed MAX ! function as it cannot be vectorized. ! ! 1709 2015-11-04 14:47:01Z maronga ! Renamed pt_1 and qv_1 to pt1 and qv1. ! Bugfix: set initial values for t_surface_p in case of restart runs ! Bugfix: zero resistance caused crash when using radiation_scheme = 'clear-sky' ! Bugfix: calculation of rad_net when using radiation_scheme = 'clear-sky' ! Added todo action ! ! 1697 2015-10-28 17:14:10Z raasch ! bugfix: misplaced cpp-directive ! ! 1695 2015-10-27 10:03:11Z maronga ! Bugfix: REAL constants provided with KIND-attribute in call of ! Replaced rif with ol ! ! 1691 2015-10-26 16:17:44Z maronga ! Added skip_time_do_lsm to allow for spin-ups without LSM. Various bugfixes: ! Soil temperatures are now defined at the edges of the layers, calculation of ! shb_eb corrected, prognostic equation for skin temperature corrected. Surface ! fluxes are now directly transfered to atmosphere ! ! 1682 2015-10-07 23:56:08Z knoop ! Code annotations made doxygen readable ! ! 1590 2015-05-08 13:56:27Z maronga ! Bugfix: definition of character strings requires same length for all elements ! ! 1585 2015-04-30 07:05:52Z maronga ! Modifications for RRTMG. Changed tables to PARAMETER type. ! ! 1571 2015-03-12 16:12:49Z maronga ! Removed upper-case variable names. Corrected distribution of precipitation to ! the liquid water reservoir and the bare soil fractions. ! ! 1555 2015-03-04 17:44:27Z maronga ! Added output of r_a and r_s ! ! 1553 2015-03-03 17:33:54Z maronga ! Improved better treatment of roughness lengths. Added default soil temperature ! profile ! ! 1551 2015-03-03 14:18:16Z maronga ! Flux calculation is now done in prandtl_fluxes. Added support for data output. ! Vertical indices have been replaced. Restart runs are now possible. Some ! variables have beem renamed. Bugfix in the prognostic equation for the surface ! temperature. Introduced z0_eb and z0h_eb, which overwrite the setting of ! roughness_length and z0_factor. Added Clapp & Hornberger parametrization for ! the hydraulic conductivity. Bugfix for root fraction and extraction ! calculation ! ! intrinsic function MAX and MIN ! ! 1500 2014-12-03 17:42:41Z maronga ! Corrected calculation of aerodynamic resistance (r_a). ! Precipitation is now added to liquid water reservoir using LE_liq. ! Added support for dry runs. ! ! 1496 2014-12-02 17:25:50Z maronga ! Initial revision ! ! ! Description: ! ------------ !> Land surface model, consisting of a solver for the energy balance at the !> surface and a multi layer soil scheme. The scheme is similar to the TESSEL !> scheme implemented in the ECMWF IFS model, with modifications according to !> H-TESSEL. The implementation is based on the formulation implemented in the !> DALES and UCLA-LES models. !> !> @todo Extensive verification energy-balance solver for vertical surfaces, !> e.g. parametrization of r_a !> @todo Revise single land-surface processes for vertical surfaces, e.g. !> treatment of humidity, etc. !> @todo Consider partial absorption of the net shortwave radiation by the !> skin layer. !> @todo Improve surface water parameterization !> @todo Invert indices (running from -3 to 0. Currently: nzb_soil=0, !> nzt_soil=3)). !> @todo Implement surface runoff model (required when performing long-term LES !> with considerable precipitation. !> @todo Revise calculation of f2 when wilting point is non-constant in the !> soil !> @todo Allow for zero soil moisture (currently, it is set to wilting point) !> @note No time step criterion is required as long as the soil layers do not !> become too thin. !> @todo Attention, pavement_subpars_1/2 are hardcoded to 8 levels, in case !> more levels are used this may cause an potential bug !> @todo Routine calc_q_surface required? !------------------------------------------------------------------------------! MODULE land_surface_model_mod USE arrays_3d, & ONLY: hyp, pt, prr, q, q_p, ql, vpt, u, v, w USE calc_mean_profile_mod, & ONLY: calc_mean_profile USE cloud_parameters, & ONLY: cp, hyrho, l_d_cp, l_d_r, l_v, pt_d_t, rho_l, r_d, r_v USE control_parameters, & ONLY: cloud_droplets, cloud_physics, coupling_start_time, dt_3d, & end_time, humidity, intermediate_timestep_count, & initializing_actions, intermediate_timestep_count_max, & land_surface, max_masks, precipitation, pt_surface, & rho_surface, spinup, spinup_pt_mean, spinup_time, & surface_pressure, timestep_scheme, tsc, & time_since_reference_point USE indices, & ONLY: nbgp, nxl, nxlg, nxr, nxrg, nyn, nyng, nys, nysg, nzb USE netcdf_data_input_mod, & ONLY : building_type_f, init_3d, input_pids_static, & netcdf_data_input_interpolate, & pavement_pars_f, pavement_subsurface_pars_f, pavement_type_f, & root_area_density_lsm_f, soil_pars_f, soil_type_f, & surface_fraction_f, vegetation_pars_f, vegetation_type_f, & water_pars_f, water_type_f USE kinds USE pegrid USE radiation_model_mod, & ONLY: albedo, albedo_type, emissivity, force_radiation_call, & radiation_scheme, unscheduled_radiation_calls USE statistics, & ONLY: hom, statistic_regions USE surface_mod, & ONLY : surf_lsm_h, surf_lsm_v, surf_type, surface_restore_elements IMPLICIT NONE TYPE surf_type_lsm REAL(wp), DIMENSION(:), ALLOCATABLE :: var_1d !< 1D prognostic variable REAL(wp), DIMENSION(:,:), ALLOCATABLE :: var_2d !< 2D prognostic variable END TYPE surf_type_lsm ! !-- LSM model constants REAL(wp), PARAMETER :: & b_ch = 6.04_wp, & ! Clapp & Hornberger exponent lambda_h_dry = 0.19_wp, & ! heat conductivity for dry soil (W/m/K) lambda_h_sm = 3.44_wp, & ! heat conductivity of the soil matrix (W/m/K) lambda_h_water = 0.57_wp, & ! heat conductivity of water (W/m/K) psi_sat = -0.388_wp, & ! soil matrix potential at saturation rho_c_soil = 2.19E6_wp, & ! volumetric heat capacity of soil (J/m3/K) rho_c_water = 4.20E6_wp, & ! volumetric heat capacity of water (J/m3/K) m_max_depth = 0.0002_wp ! Maximum capacity of the water reservoir (m) REAL(wp), DIMENSION(0:7), PARAMETER :: dz_soil_default = & ! default soil layer configuration (/ 0.01_wp, 0.02_wp, 0.04_wp, & 0.06_wp, 0.14_wp, 0.26_wp, & 0.54_wp, 1.86_wp/) REAL(wp), DIMENSION(0:3), PARAMETER :: dz_soil_ref = & ! reference four layer soil configuration used for estimating the root fractions (/ 0.07_wp, 0.21_wp, 0.72_wp, & 1.89_wp /) REAL(wp), DIMENSION(0:3), PARAMETER :: zs_ref = & ! reference four layer soil configuration used for estimating the root fractions (/ 0.07_wp, 0.28_wp, 1.0_wp, & 2.89_wp /) ! !-- LSM variables CHARACTER(10) :: surface_type = 'netcdf' !< general classification. Allowed are: !< 'vegetation', 'pavement', ('building'), !< 'water', and 'netcdf' INTEGER(iwp) :: nzb_soil = 0, & !< bottom of the soil model (Earth's surface) nzt_soil = 7, & !< top of the soil model nzt_pavement = 0, & !< top of the pavement within the soil nzs = 8, & !< number of soil layers pavement_depth_level = 0, & !< default NAMELIST nzt_pavement pavement_type = 1, & !< default NAMELIST pavement_type soil_type = 3, & !< default NAMELIST soil_type vegetation_type = 2, & !< default NAMELIST vegetation_type water_type = 1 !< default NAMELISt water_type LOGICAL :: conserve_water_content = .TRUE., & !< open or closed bottom surface for the soil model constant_roughness = .FALSE., & !< use fixed/dynamic roughness lengths for water surfaces force_radiation_call_l = .FALSE., & !< flag to force calling of radiation routine aero_resist_kray = .TRUE. !< flag to control parametrization of aerodynamic resistance at vertical surface elements ! value 9999999.9_wp -> generic available or user-defined value must be set ! otherwise -> no generic variable and user setting is optional REAL(wp) :: alpha_vangenuchten = 9999999.9_wp, & !< NAMELIST alpha_vg canopy_resistance_coefficient = 9999999.9_wp, & !< NAMELIST g_d c_surface = 9999999.9_wp, & !< Surface (skin) heat capacity (J/m2/K) deep_soil_temperature = 9999999.9_wp, & !< Deep soil temperature (bottom boundary condition) drho_l_lv, & !< (rho_l * l_v)**-1 exn, & !< value of the Exner function e_s = 0.0_wp, & !< saturation water vapour pressure field_capacity = 9999999.9_wp, & !< NAMELIST m_fc f_shortwave_incoming = 9999999.9_wp, & !< NAMELIST f_sw_in hydraulic_conductivity = 9999999.9_wp, & !< NAMELIST gamma_w_sat ke = 0.0_wp, & !< Kersten number lambda_h_sat = 0.0_wp, & !< heat conductivity for saturated soil (W/m/K) lambda_surface_stable = 9999999.9_wp, & !< NAMELIST lambda_surface_s (W/m2/K) lambda_surface_unstable = 9999999.9_wp, & !< NAMELIST lambda_surface_u (W/m2/K) leaf_area_index = 9999999.9_wp, & !< NAMELIST lai l_vangenuchten = 9999999.9_wp, & !< NAMELIST l_vg min_canopy_resistance = 9999999.9_wp, & !< NAMELIST r_canopy_min min_soil_resistance = 50.0_wp, & !< NAMELIST r_soil_min m_total = 0.0_wp, & !< weighted total water content of the soil (m3/m3) n_vangenuchten = 9999999.9_wp, & !< NAMELIST n_vg pavement_heat_capacity = 9999999.9_wp, & !< volumetric heat capacity of pavement (e.g. roads) (J/m3/K) pavement_heat_conduct = 9999999.9_wp, & !< heat conductivity for pavements (e.g. roads) (W/m/K) q_s = 0.0_wp, & !< saturation specific humidity residual_moisture = 9999999.9_wp, & !< NAMELIST m_res rho_cp, & !< rho_surface * cp rho_lv, & !< rho_ocean * l_v rd_d_rv, & !< r_d / r_v saturation_moisture = 9999999.9_wp, & !< NAMELIST m_sat skip_time_do_lsm = 0.0_wp, & !< LSM is not called before this time vegetation_coverage = 9999999.9_wp, & !< NAMELIST c_veg water_temperature = 9999999.9_wp, & !< water temperature wilting_point = 9999999.9_wp, & !< NAMELIST m_wilt z0_vegetation = 9999999.9_wp, & !< NAMELIST z0 (lsm_par) z0h_vegetation = 9999999.9_wp, & !< NAMELIST z0h (lsm_par) z0q_vegetation = 9999999.9_wp, & !< NAMELIST z0q (lsm_par) z0_pavement = 9999999.9_wp, & !< NAMELIST z0 (lsm_par) z0h_pavement = 9999999.9_wp, & !< NAMELIST z0h (lsm_par) z0q_pavement = 9999999.9_wp, & !< NAMELIST z0q (lsm_par) z0_water = 9999999.9_wp, & !< NAMELIST z0 (lsm_par) z0h_water = 9999999.9_wp, & !< NAMELIST z0h (lsm_par) z0q_water = 9999999.9_wp !< NAMELIST z0q (lsm_par) REAL(wp), DIMENSION(:), ALLOCATABLE :: ddz_soil_center, & !< 1/dz_soil_center ddz_soil, & !< 1/dz_soil dz_soil_center, & !< soil grid spacing (center-center) zs, & !< depth of the temperature/moisute levels root_extr !< root extraction REAL(wp), DIMENSION(0:20) :: root_fraction = 9999999.9_wp, & !< (NAMELIST) distribution of root surface area to the individual soil layers soil_moisture = 0.0_wp, & !< NAMELIST soil moisture content (m3/m3) soil_temperature = 9999999.9_wp, & !< NAMELIST soil temperature (K) +1 dz_soil = 9999999.9_wp, & !< (NAMELIST) soil layer depths (spacing) zs_layer = 9999999.9_wp !< soil layer depths (edge) #if defined( __nopointer ) TYPE(surf_type_lsm), TARGET :: t_soil_h, & !< Soil temperature (K), horizontal surface elements t_soil_h_p, & !< Prog. soil temperature (K), horizontal surface elements m_soil_h, & !< Soil moisture (m3/m3), horizontal surface elements m_soil_h_p !< Prog. soil moisture (m3/m3), horizontal surface elements TYPE(surf_type_lsm), DIMENSION(0:3), TARGET :: & t_soil_v, & !< Soil temperature (K), vertical surface elements t_soil_v_p, & !< Prog. soil temperature (K), vertical surface elements m_soil_v, & !< Soil moisture (m3/m3), vertical surface elements m_soil_v_p !< Prog. soil moisture (m3/m3), vertical surface elements #else TYPE(surf_type_lsm), POINTER :: t_soil_h, & !< Soil temperature (K), horizontal surface elements t_soil_h_p, & !< Prog. soil temperature (K), horizontal surface elements m_soil_h, & !< Soil moisture (m3/m3), horizontal surface elements m_soil_h_p !< Prog. soil moisture (m3/m3), horizontal surface elements TYPE(surf_type_lsm), TARGET :: t_soil_h_1, & !< t_soil_h_2, & !< m_soil_h_1, & !< m_soil_h_2 !< TYPE(surf_type_lsm), DIMENSION(:), POINTER :: & t_soil_v, & !< Soil temperature (K), vertical surface elements t_soil_v_p, & !< Prog. soil temperature (K), vertical surface elements m_soil_v, & !< Soil moisture (m3/m3), vertical surface elements m_soil_v_p !< Prog. soil moisture (m3/m3), vertical surface elements TYPE(surf_type_lsm), DIMENSION(0:3), TARGET ::& t_soil_v_1, & !< t_soil_v_2, & !< m_soil_v_1, & !< m_soil_v_2 !< #endif #if defined( __nopointer ) TYPE(surf_type_lsm), TARGET :: t_surface_h, & !< surface temperature (K), horizontal surface elements t_surface_h_p, & !< progn. surface temperature (K), horizontal surface elements m_liq_h, & !< liquid water reservoir (m), horizontal surface elements m_liq_h_p !< progn. liquid water reservoir (m), horizontal surface elements TYPE(surf_type_lsm), DIMENSION(0:3), TARGET :: & t_surface_v, & !< surface temperature (K), vertical surface elements t_surface_v_p, & !< progn. surface temperature (K), vertical surface elements m_liq_v, & !< liquid water reservoir (m), vertical surface elements m_liq_v_p !< progn. liquid water reservoir (m), vertical surface elements #else TYPE(surf_type_lsm), POINTER :: t_surface_h, & !< surface temperature (K), horizontal surface elements t_surface_h_p, & !< progn. surface temperature (K), horizontal surface elements m_liq_h, & !< liquid water reservoir (m), horizontal surface elements m_liq_h_p !< progn. liquid water reservoir (m), horizontal surface elements TYPE(surf_type_lsm), TARGET :: t_surface_h_1, & !< t_surface_h_2, & !< m_liq_h_1, & !< m_liq_h_2 !< TYPE(surf_type_lsm), DIMENSION(:), POINTER :: & t_surface_v, & !< surface temperature (K), vertical surface elements t_surface_v_p, & !< progn. surface temperature (K), vertical surface elements m_liq_v, & !< liquid water reservoir (m), vertical surface elements m_liq_v_p !< progn. liquid water reservoir (m), vertical surface elements TYPE(surf_type_lsm), DIMENSION(0:3), TARGET :: & t_surface_v_1, & !< t_surface_v_2, & !< m_liq_v_1, & !< m_liq_v_2 !< #endif #if defined( __nopointer ) REAL(wp), DIMENSION(:,:), ALLOCATABLE, TARGET :: m_liq_av #else REAL(wp), DIMENSION(:,:), ALLOCATABLE, TARGET :: m_liq_av #endif #if defined( __nopointer ) REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: t_soil_av, & !< Average of t_soil m_soil_av !< Average of m_soil #else REAL(wp), DIMENSION(:,:,:), ALLOCATABLE, TARGET :: t_soil_av, & !< Average of t_soil m_soil_av !< Average of m_soil #endif TYPE(surf_type_lsm), TARGET :: tm_liq_h_m !< liquid water reservoir tendency (m), horizontal surface elements TYPE(surf_type_lsm), TARGET :: tt_surface_h_m !< surface temperature tendency (K), horizontal surface elements TYPE(surf_type_lsm), TARGET :: tt_soil_h_m !< t_soil storage array, horizontal surface elements TYPE(surf_type_lsm), TARGET :: tm_soil_h_m !< m_soil storage array, horizontal surface elements TYPE(surf_type_lsm), DIMENSION(0:3), TARGET :: tm_liq_v_m !< liquid water reservoir tendency (m), vertical surface elements TYPE(surf_type_lsm), DIMENSION(0:3), TARGET :: tt_surface_v_m !< surface temperature tendency (K), vertical surface elements TYPE(surf_type_lsm), DIMENSION(0:3), TARGET :: tt_soil_v_m !< t_soil storage array, vertical surface elements TYPE(surf_type_lsm), DIMENSION(0:3), TARGET :: tm_soil_v_m !< m_soil storage array, vertical surface elements ! !-- Energy balance variables REAL(wp), DIMENSION(:,:), ALLOCATABLE :: & c_liq_av, & !< average of c_liq c_soil_av, & !< average of c_soil c_veg_av, & !< average of c_veg lai_av, & !< average of lai qsws_liq_av, & !< average of qsws_liq qsws_soil_av, & !< average of qsws_soil qsws_veg_av, & !< average of qsws_veg r_s_av !< average of r_s ! !-- Predefined Land surface classes (vegetation_type) CHARACTER(26), DIMENSION(0:18), PARAMETER :: vegetation_type_name = (/ & 'user defined ', & ! 0 'bare soil ', & ! 1 'crops, mixed farming ', & ! 2 'short grass ', & ! 3 'evergreen needleleaf trees', & ! 4 'deciduous needleleaf trees', & ! 5 'evergreen broadleaf trees ', & ! 6 'deciduous broadleaf trees ', & ! 7 'tall grass ', & ! 8 'desert ', & ! 9 'tundra ', & ! 10 'irrigated crops ', & ! 11 'semidesert ', & ! 12 'ice caps and glaciers ', & ! 13 'bogs and marshes ', & ! 14 'evergreen shrubs ', & ! 15 'deciduous shrubs ', & ! 16 'mixed forest/woodland ', & ! 17 'interrupted forest ' & ! 18 /) ! !-- Soil model classes (soil_type) CHARACTER(12), DIMENSION(0:6), PARAMETER :: soil_type_name = (/ & 'user defined', & ! 0 'coarse ', & ! 1 'medium ', & ! 2 'medium-fine ', & ! 3 'fine ', & ! 4 'very fine ', & ! 5 'organic ' & ! 6 /) ! !-- Pavement classes CHARACTER(29), DIMENSION(0:15), PARAMETER :: pavement_type_name = (/ & 'user defined ', & ! 0 'asphalt/concrete mix ', & ! 1 'asphalt (asphalt concrete) ', & ! 2 'concrete (Portland concrete) ', & ! 3 'sett ', & ! 4 'paving stones ', & ! 5 'cobblestone ', & ! 6 'metal ', & ! 7 'wood ', & ! 8 'gravel ', & ! 9 'fine gravel ', & ! 10 'pebblestone ', & ! 11 'woodchips ', & ! 12 'tartan (sports) ', & ! 13 'artifical turf (sports) ', & ! 14 'clay (sports) ' & ! 15 /) ! !-- Water classes CHARACTER(12), DIMENSION(0:5), PARAMETER :: water_type_name = (/ & 'user defined', & ! 0 'lake ', & ! 1 'river ', & ! 2 'ocean ', & ! 3 'pond ', & ! 4 'fountain ' & ! 5 /) ! !-- IDs for vegetation, pavement and water surfaces INTEGER(iwp) :: ind_veg = 0 !< index for vegetation surfaces, used to assess surface-fraction, albedo, etc. INTEGER(iwp) :: ind_pav = 1 !< index for pavement surfaces, used to assess surface-fraction, albedo, etc. INTEGER(iwp) :: ind_wat = 2 !< index for vegetation surfaces, used to assess surface-fraction, albedo, etc. ! !-- Land surface parameters according to the respective classes (vegetation_type) INTEGER(iwp) :: ind_v_rc_min = 0 !< index for r_canopy_min in vegetation_pars INTEGER(iwp) :: ind_v_rc_lai = 1 !< index for LAI in vegetation_pars INTEGER(iwp) :: ind_v_c_veg = 2 !< index for c_veg in vegetation_pars INTEGER(iwp) :: ind_v_gd = 3 !< index for g_d in vegetation_pars INTEGER(iwp) :: ind_v_z0 = 4 !< index for z0 in vegetation_pars INTEGER(iwp) :: ind_v_z0qh = 5 !< index for z0h / z0q in vegetation_pars INTEGER(iwp) :: ind_v_lambda_s = 6 !< index for lambda_s_s in vegetation_pars INTEGER(iwp) :: ind_v_lambda_u = 7 !< index for lambda_s_u in vegetation_pars INTEGER(iwp) :: ind_v_f_sw_in = 8 !< index for f_sw_in in vegetation_pars INTEGER(iwp) :: ind_v_c_surf = 9 !< index for c_surface in vegetation_pars INTEGER(iwp) :: ind_v_at = 10 !< index for albedo_type in vegetation_pars INTEGER(iwp) :: ind_v_emis = 11 !< index for emissivity in vegetation_pars INTEGER(iwp) :: ind_w_temp = 0 !< index for temperature in water_pars INTEGER(iwp) :: ind_w_z0 = 1 !< index for z0 in water_pars INTEGER(iwp) :: ind_w_z0h = 2 !< index for z0h in water_pars INTEGER(iwp) :: ind_w_lambda_s = 3 !< index for lambda_s_s in water_pars INTEGER(iwp) :: ind_w_lambda_u = 4 !< index for lambda_s_u in water_pars INTEGER(iwp) :: ind_w_at = 5 !< index for albedo type in water_pars INTEGER(iwp) :: ind_w_emis = 6 !< index for emissivity in water_pars INTEGER(iwp) :: ind_p_z0 = 0 !< index for z0 in pavement_pars INTEGER(iwp) :: ind_p_z0h = 1 !< index for z0h in pavement_pars INTEGER(iwp) :: ind_p_at = 2 !< index for albedo type in pavement_pars INTEGER(iwp) :: ind_p_emis = 3 !< index for emissivity in pavement_pars INTEGER(iwp) :: ind_p_lambda_h = 0 !< index for lambda_h in pavement_subsurface_pars INTEGER(iwp) :: ind_p_rho_c = 1 !< index for rho_c in pavement_pars ! !-- Land surface parameters !-- r_canopy_min, lai, c_veg, g_d z0, z0h, lambda_s_s, lambda_s_u, f_sw_in, c_surface, albedo_type, emissivity REAL(wp), DIMENSION(0:11,1:18), PARAMETER :: vegetation_pars = RESHAPE( (/ & 0.0_wp, 0.00_wp, 0.00_wp, 0.00_wp, 0.005_wp, 0.5E-4_wp, 0.0_wp, 0.0_wp, 0.00_wp, 0.00_wp, 17.0_wp, 0.94_wp, & ! 1 180.0_wp, 3.00_wp, 1.00_wp, 0.00_wp, 0.10_wp, 0.001_wp, 10.0_wp, 10.0_wp, 0.05_wp, 0.00_wp, 2.0_wp, 0.95_wp, & ! 2 110.0_wp, 2.00_wp, 1.00_wp, 0.00_wp, 0.03_wp, 0.3E-4_wp, 10.0_wp, 10.0_wp, 0.05_wp, 0.00_wp, 2.0_wp, 0.95_wp, & ! 3 500.0_wp, 5.00_wp, 1.00_wp, 0.03_wp, 2.00_wp, 2.00_wp, 20.0_wp, 15.0_wp, 0.03_wp, 0.00_wp, 5.0_wp, 0.97_wp, & ! 4 500.0_wp, 5.00_wp, 1.00_wp, 0.03_wp, 2.00_wp, 2.00_wp, 20.0_wp, 15.0_wp, 0.03_wp, 0.00_wp, 6.0_wp, 0.97_wp, & ! 5 175.0_wp, 5.00_wp, 1.00_wp, 0.03_wp, 2.00_wp, 2.00_wp, 20.0_wp, 15.0_wp, 0.03_wp, 0.00_wp, 8.0_wp, 0.97_wp, & ! 6 240.0_wp, 6.00_wp, 0.99_wp, 0.13_wp, 2.00_wp, 2.00_wp, 20.0_wp, 15.0_wp, 0.03_wp, 0.00_wp, 9.0_wp, 0.97_wp, & ! 7 100.0_wp, 2.00_wp, 0.70_wp, 0.00_wp, 0.47_wp, 0.47E-2_wp, 10.0_wp, 10.0_wp, 0.05_wp, 0.00_wp, 8.0_wp, 0.97_wp, & ! 8 250.0_wp, 0.05_wp, 0.00_wp, 0.00_wp, 0.013_wp, 0.013E-2_wp, 15.0_wp, 15.0_wp, 0.00_wp, 0.00_wp, 3.0_wp, 0.94_wp, & ! 9 80.0_wp, 1.00_wp, 0.50_wp, 0.00_wp, 0.034_wp, 0.034E-2_wp, 10.0_wp, 10.0_wp, 0.05_wp, 0.00_wp, 11.0_wp, 0.97_wp, & ! 10 180.0_wp, 3.00_wp, 1.00_wp, 0.00_wp, 0.5_wp, 0.50E-2_wp, 10.0_wp, 10.0_wp, 0.05_wp, 0.00_wp, 13.0_wp, 0.97_wp, & ! 11 150.0_wp, 0.50_wp, 0.10_wp, 0.00_wp, 0.17_wp, 0.17E-2_wp, 10.0_wp, 10.0_wp, 0.05_wp, 0.00_wp, 2.0_wp, 0.97_wp, & ! 12 0.0_wp, 0.00_wp, 0.00_wp, 0.00_wp, 1.3E-3_wp, 1.3E-4_wp, 58.0_wp, 58.0_wp, 0.00_wp, 0.00_wp, 11.0_wp, 0.97_wp, & ! 13 240.0_wp, 4.00_wp, 0.60_wp, 0.00_wp, 0.83_wp, 0.83E-2_wp, 10.0_wp, 10.0_wp, 0.05_wp, 0.00_wp, 4.0_wp, 0.97_wp, & ! 14 225.0_wp, 3.00_wp, 0.50_wp, 0.00_wp, 0.10_wp, 0.10E-2_wp, 10.0_wp, 10.0_wp, 0.05_wp, 0.00_wp, 4.0_wp, 0.97_wp, & ! 15 225.0_wp, 1.50_wp, 0.50_wp, 0.00_wp, 0.25_wp, 0.25E-2_wp, 10.0_wp, 10.0_wp, 0.05_wp, 0.00_wp, 4.0_wp, 0.97_wp, & ! 16 250.0_wp, 5.00_wp, 1.00_wp, 0.03_wp, 2.00_wp, 2.00_wp, 20.0_wp, 15.0_wp, 0.03_wp, 0.00_wp, 7.0_wp, 0.97_wp, & ! 17 175.0_wp, 2.50_wp, 1.00_wp, 0.03_wp, 1.10_wp, 1.10_wp, 20.0_wp, 15.0_wp, 0.03_wp, 0.00_wp, 8.0_wp, 0.97_wp & ! 18 /), (/ 12, 18 /) ) ! !-- Root distribution for default soil layer configuration (sum = 1) !-- level 1 - level 4 according to zs_ref REAL(wp), DIMENSION(0:3,1:18), PARAMETER :: root_distribution = RESHAPE( (/ & 1.00_wp, 0.00_wp, 0.00_wp, 0.00_wp, & ! 1 0.24_wp, 0.41_wp, 0.31_wp, 0.04_wp, & ! 2 0.35_wp, 0.38_wp, 0.23_wp, 0.04_wp, & ! 3 0.26_wp, 0.39_wp, 0.29_wp, 0.06_wp, & ! 4 0.26_wp, 0.38_wp, 0.29_wp, 0.07_wp, & ! 5 0.24_wp, 0.38_wp, 0.31_wp, 0.07_wp, & ! 6 0.25_wp, 0.34_wp, 0.27_wp, 0.14_wp, & ! 7 0.27_wp, 0.27_wp, 0.27_wp, 0.09_wp, & ! 8 1.00_wp, 0.00_wp, 0.00_wp, 0.00_wp, & ! 9 0.47_wp, 0.45_wp, 0.08_wp, 0.00_wp, & ! 10 0.24_wp, 0.41_wp, 0.31_wp, 0.04_wp, & ! 11 0.17_wp, 0.31_wp, 0.33_wp, 0.19_wp, & ! 12 0.00_wp, 0.00_wp, 0.00_wp, 0.00_wp, & ! 13 0.25_wp, 0.34_wp, 0.27_wp, 0.11_wp, & ! 14 0.23_wp, 0.36_wp, 0.30_wp, 0.11_wp, & ! 15 0.23_wp, 0.36_wp, 0.30_wp, 0.11_wp, & ! 16 0.19_wp, 0.35_wp, 0.36_wp, 0.10_wp, & ! 17 0.19_wp, 0.35_wp, 0.36_wp, 0.10_wp & ! 18 /), (/ 4, 18 /) ) ! !-- Soil parameters according to the following porosity classes (soil_type) ! !-- Soil parameters alpha_vg, l_vg, n_vg, gamma_w_sat, m_sat, m_fc, m_wilt, m_res REAL(wp), DIMENSION(0:7,1:6), PARAMETER :: soil_pars = RESHAPE( (/ & 3.83_wp, 1.250_wp, 1.38_wp, 6.94E-6_wp, 0.403_wp, 0.244_wp, 0.059_wp, 0.025_wp,& ! 1 3.14_wp, -2.342_wp, 1.28_wp, 1.16E-6_wp, 0.439_wp, 0.347_wp, 0.151_wp, 0.010_wp,& ! 2 0.83_wp, -0.588_wp, 1.25_wp, 0.26E-6_wp, 0.430_wp, 0.383_wp, 0.133_wp, 0.010_wp,& ! 3 3.67_wp, -1.977_wp, 1.10_wp, 2.87E-6_wp, 0.520_wp, 0.448_wp, 0.279_wp, 0.010_wp,& ! 4 2.65_wp, 2.500_wp, 1.10_wp, 1.74E-6_wp, 0.614_wp, 0.541_wp, 0.335_wp, 0.010_wp,& ! 5 1.30_wp, 0.400_wp, 1.20_wp, 0.93E-6_wp, 0.766_wp, 0.663_wp, 0.267_wp, 0.010_wp & ! 6 /), (/ 8, 6 /) ) ! !-- TO BE FILLED !-- Pavement parameters z0, z0h, albedo_type, emissivity REAL(wp), DIMENSION(0:3,1:15), PARAMETER :: pavement_pars = RESHAPE( (/ & 1.0E-4_wp, 1.0E-5_wp, 18.0_wp, 0.97_wp, & ! 1 1.0E-4_wp, 1.0E-5_wp, 19.0_wp, 0.94_wp, & ! 2 1.0E-4_wp, 1.0E-5_wp, 20.0_wp, 0.98_wp, & ! 3 1.0E-4_wp, 1.0E-5_wp, 21.0_wp, 0.93_wp, & ! 4 1.0E-4_wp, 1.0E-5_wp, 22.0_wp, 0.97_wp, & ! 5 1.0E-4_wp, 1.0E-5_wp, 23.0_wp, 0.97_wp, & ! 6 1.0E-4_wp, 1.0E-5_wp, 24.0_wp, 0.97_wp, & ! 7 1.0E-4_wp, 1.0E-5_wp, 25.0_wp, 0.94_wp, & ! 8 1.0E-4_wp, 1.0E-5_wp, 26.0_wp, 0.98_wp, & ! 9 1.0E-4_wp, 1.0E-5_wp, 27.0_wp, 0.93_wp, & ! 10 1.0E-4_wp, 1.0E-5_wp, 28.0_wp, 0.97_wp, & ! 11 1.0E-4_wp, 1.0E-5_wp, 29.0_wp, 0.97_wp, & ! 12 1.0E-4_wp, 1.0E-5_wp, 30.0_wp, 0.97_wp, & ! 13 1.0E-4_wp, 1.0E-5_wp, 31.0_wp, 0.94_wp, & ! 14 1.0E-4_wp, 1.0E-5_wp, 32.0_wp, 0.98_wp & ! 15 /), (/ 4, 15 /) ) ! !-- Pavement subsurface parameters part 1: thermal conductivity (W/m/K) !-- 0.0-0.01, 0.01-0.03, 0.03-0.07, 0.07-0.15, 0.15-0.30, 0.30-0.50, 0.50-1.25, 1.25-3.00 REAL(wp), DIMENSION(0:7,1:15), PARAMETER :: pavement_subsurface_pars_1 = RESHAPE( (/ & 1.00_wp, 1.00_wp, 1.00_wp, 1.00_wp, 1.00_wp, 1.00_wp, 9999999.9_wp, 9999999.9_wp, & ! 1 1.00_wp, 1.00_wp, 1.00_wp, 1.00_wp, 1.00_wp, 1.00_wp, 9999999.9_wp, 9999999.9_wp, & ! 2 1.00_wp, 1.00_wp, 1.00_wp, 1.00_wp, 1.00_wp, 1.00_wp, 9999999.9_wp, 9999999.9_wp, & ! 3 1.00_wp, 1.00_wp, 1.00_wp, 1.00_wp, 1.00_wp, 1.00_wp, 9999999.9_wp, 9999999.9_wp, & ! 4 1.00_wp, 1.00_wp, 1.00_wp, 1.00_wp, 1.00_wp, 1.00_wp, 9999999.9_wp, 9999999.9_wp, & ! 5 1.00_wp, 1.00_wp, 1.00_wp, 1.00_wp, 1.00_wp, 1.00_wp, 9999999.9_wp, 9999999.9_wp, & ! 6 1.00_wp, 1.00_wp, 1.00_wp, 1.00_wp, 1.00_wp, 1.00_wp, 9999999.9_wp, 9999999.9_wp, & ! 7 1.00_wp, 1.00_wp, 1.00_wp, 1.00_wp, 1.00_wp, 1.00_wp, 9999999.9_wp, 9999999.9_wp, & ! 8 1.00_wp, 1.00_wp, 1.00_wp, 1.00_wp, 1.00_wp, 1.00_wp, 9999999.9_wp, 9999999.9_wp, & ! 9 1.00_wp, 1.00_wp, 1.00_wp, 1.00_wp, 1.00_wp, 1.00_wp, 9999999.9_wp, 9999999.9_wp, & ! 10 1.00_wp, 1.00_wp, 1.00_wp, 1.00_wp, 1.00_wp, 1.00_wp, 9999999.9_wp, 9999999.9_wp, & ! 11 1.00_wp, 1.00_wp, 1.00_wp, 1.00_wp, 1.00_wp, 1.00_wp, 9999999.9_wp, 9999999.9_wp, & ! 12 1.00_wp, 1.00_wp, 1.00_wp, 1.00_wp, 1.00_wp, 1.00_wp, 9999999.9_wp, 9999999.9_wp, & ! 13 1.00_wp, 1.00_wp, 1.00_wp, 1.00_wp, 1.00_wp, 1.00_wp, 9999999.9_wp, 9999999.9_wp, & ! 14 1.00_wp, 1.00_wp, 1.00_wp, 1.00_wp, 1.00_wp, 1.00_wp, 9999999.9_wp, 9999999.9_wp & ! 15 /), (/ 8, 15 /) ) ! !-- Pavement subsurface parameters part 2: volumetric heat capacity (J/m3/K) !-- 0.0-0.01, 0.01-0.03, 0.03-0.07, 0.07-0.15, 0.15-0.30, 0.30-0.50, 0.50-1.25, 1.25-3.00 REAL(wp), DIMENSION(0:7,1:15), PARAMETER :: pavement_subsurface_pars_2 = RESHAPE( (/ & 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 9999999.9_wp, 9999999.9_wp, & ! 1 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 9999999.9_wp, 9999999.9_wp, & ! 2 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 9999999.9_wp, 9999999.9_wp, & ! 3 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 9999999.9_wp, 9999999.9_wp, & ! 4 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 9999999.9_wp, 9999999.9_wp, & ! 5 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 9999999.9_wp, 9999999.9_wp, & ! 6 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 9999999.9_wp, 9999999.9_wp, & ! 7 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 9999999.9_wp, 9999999.9_wp, & ! 8 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 9999999.9_wp, 9999999.9_wp, & ! 9 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 9999999.9_wp, 9999999.9_wp, & ! 10 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 9999999.9_wp, 9999999.9_wp, & ! 11 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 9999999.9_wp, 9999999.9_wp, & ! 12 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 9999999.9_wp, 9999999.9_wp, & ! 13 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 9999999.9_wp, 9999999.9_wp, & ! 14 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 1.94E6_wp, 9999999.9_wp, 9999999.9_wp & ! 15 /), (/ 8, 15 /) ) ! !-- TO BE FILLED !-- Water parameters temperature, z0, z0h, albedo_type, emissivity, REAL(wp), DIMENSION(0:6,1:5), PARAMETER :: water_pars = RESHAPE( (/ & 283.0_wp, 0.01_wp, 0.001_wp, 1.0E10_wp, 1.0E10_wp, 1.0_wp, 0.99_wp, & ! 1 283.0_wp, 0.01_wp, 0.001_wp, 1.0E10_wp, 1.0E10_wp, 1.0_wp, 0.99_wp, & ! 2 283.0_wp, 0.01_wp, 0.001_wp, 1.0E10_wp, 1.0E10_wp, 1.0_wp, 0.99_wp, & ! 3 283.0_wp, 0.01_wp, 0.001_wp, 1.0E10_wp, 1.0E10_wp, 1.0_wp, 0.99_wp, & ! 4 283.0_wp, 0.01_wp, 0.001_wp, 1.0E10_wp, 1.0E10_wp, 1.0_wp, 0.99_wp & ! 5 /), (/ 7, 5 /) ) SAVE PRIVATE ! !-- Public functions PUBLIC lsm_boundary_condition, lsm_check_data_output, & lsm_check_data_output_pr, & lsm_check_parameters, lsm_define_netcdf_grid, lsm_3d_data_averaging,& lsm_data_output_2d, lsm_data_output_3d, lsm_energy_balance, & lsm_header, lsm_init, lsm_init_arrays, lsm_parin, lsm_soil_model, & lsm_swap_timelevel, lsm_read_restart_data, lsm_write_restart_data ! !vegetat !-- Public parameters, constants and initial values PUBLIC aero_resist_kray, skip_time_do_lsm ! !-- Public grid variables PUBLIC nzb_soil, nzs, nzt_soil, zs ! !-- Public prognostic variables PUBLIC m_soil_h, t_soil_h INTERFACE lsm_boundary_condition MODULE PROCEDURE lsm_boundary_condition END INTERFACE lsm_boundary_condition INTERFACE lsm_check_data_output MODULE PROCEDURE lsm_check_data_output END INTERFACE lsm_check_data_output INTERFACE lsm_check_data_output_pr MODULE PROCEDURE lsm_check_data_output_pr END INTERFACE lsm_check_data_output_pr INTERFACE lsm_check_parameters MODULE PROCEDURE lsm_check_parameters END INTERFACE lsm_check_parameters INTERFACE lsm_3d_data_averaging MODULE PROCEDURE lsm_3d_data_averaging END INTERFACE lsm_3d_data_averaging INTERFACE lsm_data_output_2d MODULE PROCEDURE lsm_data_output_2d END INTERFACE lsm_data_output_2d INTERFACE lsm_data_output_3d MODULE PROCEDURE lsm_data_output_3d END INTERFACE lsm_data_output_3d INTERFACE lsm_define_netcdf_grid MODULE PROCEDURE lsm_define_netcdf_grid END INTERFACE lsm_define_netcdf_grid INTERFACE lsm_energy_balance MODULE PROCEDURE lsm_energy_balance END INTERFACE lsm_energy_balance INTERFACE lsm_header MODULE PROCEDURE lsm_header END INTERFACE lsm_header INTERFACE lsm_init MODULE PROCEDURE lsm_init END INTERFACE lsm_init INTERFACE lsm_init_arrays MODULE PROCEDURE lsm_init_arrays END INTERFACE lsm_init_arrays INTERFACE lsm_parin MODULE PROCEDURE lsm_parin END INTERFACE lsm_parin INTERFACE lsm_soil_model MODULE PROCEDURE lsm_soil_model END INTERFACE lsm_soil_model INTERFACE lsm_swap_timelevel MODULE PROCEDURE lsm_swap_timelevel END INTERFACE lsm_swap_timelevel INTERFACE lsm_read_restart_data MODULE PROCEDURE lsm_read_restart_data END INTERFACE lsm_read_restart_data INTERFACE lsm_write_restart_data MODULE PROCEDURE lsm_write_restart_data END INTERFACE lsm_write_restart_data CONTAINS !------------------------------------------------------------------------------! ! Description: ! ------------ !> Set internal Neumann boundary condition at outer soil grid points !> for temperature and humidity. !------------------------------------------------------------------------------! SUBROUTINE lsm_boundary_condition IMPLICIT NONE INTEGER(iwp) :: i !< grid index x-direction INTEGER(iwp) :: ioff !< offset index x-direction indicating location of soil grid point INTEGER(iwp) :: j !< grid index y-direction INTEGER(iwp) :: joff !< offset index x-direction indicating location of soil grid point INTEGER(iwp) :: k !< grid index z-direction INTEGER(iwp) :: koff !< offset index x-direction indicating location of soil grid point INTEGER(iwp) :: l !< running index surface-orientation INTEGER(iwp) :: m !< running index surface elements koff = surf_lsm_h%koff DO m = 1, surf_lsm_h%ns i = surf_lsm_h%i(m) j = surf_lsm_h%j(m) k = surf_lsm_h%k(m) pt(k+koff,j,i) = pt(k,j,i) ENDDO DO l = 0, 3 ioff = surf_lsm_v(l)%ioff joff = surf_lsm_v(l)%joff DO m = 1, surf_lsm_v(l)%ns i = surf_lsm_v(l)%i(m) j = surf_lsm_v(l)%j(m) k = surf_lsm_v(l)%k(m) pt(k,j+joff,i+ioff) = pt(k,j,i) ENDDO ENDDO ! !-- In case of humidity, set boundary conditions also for q and vpt. IF ( humidity ) THEN koff = surf_lsm_h%koff DO m = 1, surf_lsm_h%ns i = surf_lsm_h%i(m) j = surf_lsm_h%j(m) k = surf_lsm_h%k(m) q(k+koff,j,i) = q(k,j,i) vpt(k+koff,j,i) = vpt(k,j,i) ENDDO DO l = 0, 3 ioff = surf_lsm_v(l)%ioff joff = surf_lsm_v(l)%joff DO m = 1, surf_lsm_v(l)%ns i = surf_lsm_v(l)%i(m) j = surf_lsm_v(l)%j(m) k = surf_lsm_v(l)%k(m) q(k,j+joff,i+ioff) = q(k,j,i) vpt(k,j+joff,i+ioff) = vpt(k,j,i) ENDDO ENDDO ENDIF END SUBROUTINE lsm_boundary_condition !------------------------------------------------------------------------------! ! Description: ! ------------ !> Check data output for land surface model !------------------------------------------------------------------------------! SUBROUTINE lsm_check_data_output( var, unit, i, ilen, k ) USE control_parameters, & ONLY: data_output, message_string IMPLICIT NONE CHARACTER (LEN=*) :: unit !< CHARACTER (LEN=*) :: var !< INTEGER(iwp) :: i INTEGER(iwp) :: ilen INTEGER(iwp) :: k SELECT CASE ( TRIM( var ) ) CASE ( 'm_soil' ) IF ( .NOT. land_surface ) THEN message_string = 'output of "' // TRIM( var ) // '" requi' // & 'res land_surface = .TRUE.' CALL message( 'check_parameters', 'PA0404', 1, 2, 0, 6, 0 ) ENDIF unit = 'm3/m3' CASE ( 't_soil' ) IF ( .NOT. land_surface ) THEN message_string = 'output of "' // TRIM( var ) // '" requi' // & 'res land_surface = .TRUE.' CALL message( 'check_parameters', 'PA0404', 1, 2, 0, 6, 0 ) ENDIF unit = 'K' CASE ( 'lai*', 'c_liq*', 'c_soil*', 'c_veg*', 'm_liq*', & 'qsws_liq*', 'qsws_soil*', 'qsws_veg*', 'r_s*' ) IF ( k == 0 .OR. data_output(i)(ilen-2:ilen) /= '_xy' ) THEN message_string = 'illegal value for data_output: "' // & TRIM( var ) // '" & only 2d-horizontal ' // & 'cross sections are allowed for this value' CALL message( 'check_parameters', 'PA0111', 1, 2, 0, 6, 0 ) ENDIF IF ( TRIM( var ) == 'lai*' .AND. .NOT. land_surface ) THEN message_string = 'output of "' // TRIM( var ) // '" requi' // & 'res land_surface = .TRUE.' CALL message( 'check_parameters', 'PA0404', 1, 2, 0, 6, 0 ) ENDIF IF ( TRIM( var ) == 'c_liq*' .AND. .NOT. land_surface ) THEN message_string = 'output of "' // TRIM( var ) // '" requi' // & 'res land_surface = .TRUE.' CALL message( 'check_parameters', 'PA0404', 1, 2, 0, 6, 0 ) ENDIF IF ( TRIM( var ) == 'c_soil*' .AND. .NOT. land_surface ) THEN message_string = 'output of "' // TRIM( var ) // '" requi' // & 'res land_surface = .TRUE.' CALL message( 'check_parameters', 'PA0404', 1, 2, 0, 6, 0 ) ENDIF IF ( TRIM( var ) == 'c_veg*' .AND. .NOT. land_surface ) THEN message_string = 'output of "' // TRIM( var ) // '" requi' // & 'res land_surface = .TRUE.' CALL message( 'check_parameters', 'PA0404', 1, 2, 0, 6, 0 ) ENDIF IF ( TRIM( var ) == 'm_liq*' .AND. .NOT. land_surface ) THEN message_string = 'output of "' // TRIM( var ) // '" requi' // & 'res land_surface = .TRUE.' CALL message( 'check_parameters', 'PA0404', 1, 2, 0, 6, 0 ) ENDIF IF ( TRIM( var ) == 'qsws_liq*' .AND. .NOT. land_surface ) & THEN message_string = 'output of "' // TRIM( var ) // '" requi' // & 'res land_surface = .TRUE.' CALL message( 'check_parameters', 'PA0404', 1, 2, 0, 6, 0 ) ENDIF IF ( TRIM( var ) == 'qsws_soil*' .AND. .NOT. land_surface ) & THEN message_string = 'output of "' // TRIM( var ) // '" requi' // & 'res land_surface = .TRUE.' CALL message( 'check_parameters', 'PA0404', 1, 2, 0, 6, 0 ) ENDIF IF ( TRIM( var ) == 'qsws_veg*' .AND. .NOT. land_surface ) & THEN message_string = 'output of "' // TRIM( var ) // '" requi' // & 'res land_surface = .TRUE.' CALL message( 'check_parameters', 'PA0404', 1, 2, 0, 6, 0 ) ENDIF IF ( TRIM( var ) == 'r_s*' .AND. .NOT. land_surface ) & THEN message_string = 'output of "' // TRIM( var ) // '" requi' // & 'res land_surface = .TRUE.' CALL message( 'check_parameters', 'PA0404', 1, 2, 0, 6, 0 ) ENDIF IF ( TRIM( var ) == 'lai*' ) unit = 'none' IF ( TRIM( var ) == 'c_liq*' ) unit = 'none' IF ( TRIM( var ) == 'c_soil*') unit = 'none' IF ( TRIM( var ) == 'c_veg*' ) unit = 'none' IF ( TRIM( var ) == 'm_liq*' ) unit = 'm' IF ( TRIM( var ) == 'qsws_liq*' ) unit = 'W/m2' IF ( TRIM( var ) == 'qsws_soil*' ) unit = 'W/m2' IF ( TRIM( var ) == 'qsws_veg*' ) unit = 'W/m2' IF ( TRIM( var ) == 'r_s*') unit = 's/m' CASE DEFAULT unit = 'illegal' END SELECT END SUBROUTINE lsm_check_data_output !------------------------------------------------------------------------------! ! Description: ! ------------ !> Check data output of profiles for land surface model !------------------------------------------------------------------------------! SUBROUTINE lsm_check_data_output_pr( variable, var_count, unit, dopr_unit ) USE control_parameters, & ONLY: data_output_pr, message_string USE indices USE profil_parameter USE statistics IMPLICIT NONE CHARACTER (LEN=*) :: unit !< CHARACTER (LEN=*) :: variable !< CHARACTER (LEN=*) :: dopr_unit !< local value of dopr_unit INTEGER(iwp) :: user_pr_index !< INTEGER(iwp) :: var_count !< SELECT CASE ( TRIM( variable ) ) CASE ( 't_soil', '#t_soil' ) IF ( .NOT. land_surface ) THEN message_string = 'data_output_pr = ' // & TRIM( data_output_pr(var_count) ) // ' is' // & 'not implemented for land_surface = .FALSE.' CALL message( 'check_parameters', 'PA0402', 1, 2, 0, 6, 0 ) ELSE dopr_index(var_count) = 89 dopr_unit = 'K' hom(0:nzs-1,2,89,:) = SPREAD( - zs(nzb_soil:nzt_soil), 2, statistic_regions+1 ) IF ( data_output_pr(var_count)(1:1) == '#' ) THEN dopr_initial_index(var_count) = 90 hom(0:nzs-1,2,90,:) = SPREAD( - zs(nzb_soil:nzt_soil), 2, statistic_regions+1 ) data_output_pr(var_count) = data_output_pr(var_count)(2:) ENDIF unit = dopr_unit ENDIF CASE ( 'm_soil', '#m_soil' ) IF ( .NOT. land_surface ) THEN message_string = 'data_output_pr = ' // & TRIM( data_output_pr(var_count) ) // ' is' // & ' not implemented for land_surface = .FALSE.' CALL message( 'check_parameters', 'PA0402', 1, 2, 0, 6, 0 ) ELSE dopr_index(var_count) = 91 dopr_unit = 'm3/m3' hom(0:nzs-1,2,91,:) = SPREAD( - zs(nzb_soil:nzt_soil), 2, statistic_regions+1 ) IF ( data_output_pr(var_count)(1:1) == '#' ) THEN dopr_initial_index(var_count) = 92 hom(0:nzs-1,2,92,:) = SPREAD( - zs(nzb_soil:nzt_soil), 2, statistic_regions+1 ) data_output_pr(var_count) = data_output_pr(var_count)(2:) ENDIF unit = dopr_unit ENDIF CASE DEFAULT unit = 'illegal' END SELECT END SUBROUTINE lsm_check_data_output_pr !------------------------------------------------------------------------------! ! Description: ! ------------ !> Check parameters routine for land surface model !------------------------------------------------------------------------------! SUBROUTINE lsm_check_parameters USE control_parameters, & ONLY: bc_pt_b, bc_q_b, constant_flux_layer, message_string, & most_method IMPLICIT NONE INTEGER(iwp) :: k !< running index, z-dimension ! !-- Check for a valid setting of surface_type. The default value is 'netcdf'. !-- In that case, the surface types are read from NetCDF file IF ( TRIM( surface_type ) /= 'vegetation' .AND. & TRIM( surface_type ) /= 'pavement' .AND. & TRIM( surface_type ) /= 'water' .AND. & TRIM( surface_type ) /= 'netcdf' ) THEN message_string = 'unknown surface type surface_type = "' // & TRIM( surface_type ) // '"' CALL message( 'check_parameters', 'PA0019', 1, 2, 0, 6, 0 ) ENDIF ! !-- Dirichlet boundary conditions are required as the surface fluxes are !-- calculated from the temperature/humidity gradients in the land surface !-- model IF ( bc_pt_b == 'neumann' .OR. bc_q_b == 'neumann' ) THEN message_string = 'lsm requires setting of'// & 'bc_pt_b = "dirichlet" and '// & 'bc_q_b = "dirichlet"' CALL message( 'check_parameters', 'PA0399', 1, 2, 0, 6, 0 ) ENDIF IF ( .NOT. constant_flux_layer ) THEN message_string = 'lsm requires '// & 'constant_flux_layer = .T.' CALL message( 'check_parameters', 'PA0400', 1, 2, 0, 6, 0 ) ENDIF IF ( TRIM( surface_type ) == 'vegetation' ) THEN IF ( vegetation_type == 0 ) THEN IF ( min_canopy_resistance == 9999999.9_wp ) THEN message_string = 'vegetation_type = 0 (user defined)'// & 'requires setting of min_canopy_resistance'// & '/= 9999999.9' CALL message( 'check_parameters', 'PA0401', 1, 2, 0, 6, 0 ) ENDIF IF ( leaf_area_index == 9999999.9_wp ) THEN message_string = 'vegetation_type = 0 (user_defined)'// & 'requires setting of leaf_area_index'// & '/= 9999999.9' CALL message( 'check_parameters', 'PA0401', 1, 2, 0, 6, 0 ) ENDIF IF ( vegetation_coverage == 9999999.9_wp ) THEN message_string = 'vegetation_type = 0 (user_defined)'// & 'requires setting of vegetation_coverage'// & '/= 9999999.9' CALL message( 'check_parameters', 'PA0401', 1, 2, 0, 6, 0 ) ENDIF IF ( canopy_resistance_coefficient == 9999999.9_wp) THEN message_string = 'vegetation_type = 0 (user_defined)'// & 'requires setting of'// & 'canopy_resistance_coefficient /= 9999999.9' CALL message( 'check_parameters', 'PA0401', 1, 2, 0, 6, 0 ) ENDIF IF ( lambda_surface_stable == 9999999.9_wp ) THEN message_string = 'vegetation_type = 0 (user_defined)'// & 'requires setting of lambda_surface_stable'// & '/= 9999999.9' CALL message( 'check_parameters', 'PA0401', 1, 2, 0, 6, 0 ) ENDIF IF ( lambda_surface_unstable == 9999999.9_wp ) THEN message_string = 'vegetation_type = 0 (user_defined)'// & 'requires setting of lambda_surface_unstable'// & '/= 9999999.9' CALL message( 'check_parameters', 'PA0401', 1, 2, 0, 6, 0 ) ENDIF IF ( f_shortwave_incoming == 9999999.9_wp ) THEN message_string = 'vegetation_type = 0 (user_defined)'// & 'requires setting of f_shortwave_incoming'// & '/= 9999999.9' CALL message( 'check_parameters', 'PA0401', 1, 2, 0, 6, 0 ) ENDIF IF ( z0_vegetation == 9999999.9_wp ) THEN message_string = 'vegetation_type = 0 (user_defined)'// & 'requires setting of z0_vegetation'// & '/= 9999999.9' CALL message( 'check_parameters', 'PA0401', 1, 2, 0, 6, 0 ) ENDIF IF ( z0h_vegetation == 9999999.9_wp ) THEN message_string = 'vegetation_type = 0 (user_defined)'// & 'requires setting of z0h_vegetation'// & '/= 9999999.9' CALL message( 'check_parameters', 'PA0401', 1, 2, 0, 6, 0 ) ENDIF ENDIF IF ( vegetation_type == 1 ) THEN IF ( vegetation_coverage /= 9999999.9_wp .AND. vegetation_coverage & /= 0.0_wp ) THEN message_string = 'vegetation_type = 1 (bare soil)'// & ' requires vegetation_coverage = 0' CALL message( 'check_parameters', 'PA0471', 1, 2, 0, 6, 0 ) ENDIF ENDIF ENDIF IF ( TRIM( surface_type ) == 'water' ) THEN IF ( TRIM( most_method ) == 'lookup' ) THEN WRITE( message_string, * ) 'surface_type = ', surface_type, & ' is not allowed in combination with ', & 'most_method = ', most_method CALL message( 'check_parameters', 'PA0417', 1, 2, 0, 6, 0 ) ENDIF IF ( water_type == 0 ) THEN IF ( z0_water == 9999999.9_wp ) THEN message_string = 'water_type = 0 (user_defined)'// & 'requires setting of z0_water'// & '/= 9999999.9' CALL message( 'check_parameters', 'PA0415', 1, 2, 0, 6, 0 ) ENDIF IF ( z0h_water == 9999999.9_wp ) THEN message_string = 'water_type = 0 (user_defined)'// & 'requires setting of z0h_water'// & '/= 9999999.9' CALL message( 'check_parameters', 'PA0392', 1, 2, 0, 6, 0 ) ENDIF IF ( water_temperature == 9999999.9_wp ) THEN message_string = 'water_type = 0 (user_defined)'// & 'requires setting of water_temperature'// & '/= 9999999.9' CALL message( 'check_parameters', 'PA0379', 1, 2, 0, 6, 0 ) ENDIF ENDIF ENDIF IF ( TRIM( surface_type ) == 'pavement' ) THEN IF ( ANY( dz_soil /= 9999999.9_wp ) .AND. pavement_type /= 0 ) THEN message_string = 'non-default setting of dz_soil '// & 'does not allow to use pavement_type /= 0)' CALL message( 'check_parameters', 'PA0341', 1, 2, 0, 6, 0 ) ENDIF IF ( pavement_type == 0 ) THEN IF ( z0_pavement == 9999999.9_wp ) THEN message_string = 'pavement_type = 0 (user_defined)'// & 'requires setting of z0_pavement'// & '/= 9999999.9' CALL message( 'check_parameters', 'PA0352', 1, 2, 0, 6, 0 ) ENDIF IF ( z0h_pavement == 9999999.9_wp ) THEN message_string = 'pavement_type = 0 (user_defined)'// & 'requires setting of z0h_pavement'// & '/= 9999999.9' CALL message( 'check_parameters', 'PA0353', 1, 2, 0, 6, 0 ) ENDIF IF ( pavement_heat_conduct == 9999999.9_wp ) THEN message_string = 'pavement_type = 0 (user_defined)'// & 'requires setting of pavement_heat_conduct'// & '/= 9999999.9' CALL message( 'check_parameters', 'PA0342', 1, 2, 0, 6, 0 ) ENDIF IF ( pavement_heat_capacity == 9999999.9_wp ) THEN message_string = 'pavement_type = 0 (user_defined)'// & 'requires setting of pavement_heat_capacity'// & '/= 9999999.9' CALL message( 'check_parameters', 'PA0139', 1, 2, 0, 6, 0 ) ENDIF IF ( pavement_depth_level == 0 ) THEN message_string = 'pavement_type = 0 (user_defined)'// & 'requires setting of pavement_depth_level'// & '/= 0' CALL message( 'check_parameters', 'PA0474', 1, 2, 0, 6, 0 ) ENDIF ENDIF ENDIF IF ( TRIM( surface_type ) == 'netcdf' ) THEN IF ( ANY( water_type_f%var /= water_type_f%fill ) .AND. & TRIM( most_method ) == 'lookup' ) THEN WRITE( message_string, * ) 'water-surfaces are not allowed in ' // & 'combination with most_method = ', & TRIM( most_method ) CALL message( 'check_parameters', 'PA0999', 2, 2, 0, 6, 0 ) ENDIF ! !-- MS: Some problme here, after calling message everythings stucks at !-- MPI_FINALIZE call. IF ( ANY( pavement_type_f%var /= pavement_type_f%fill ) .AND. & ANY( dz_soil /= 9999999.9_wp ) ) THEN message_string = 'pavement-surfaces are not allowed in ' // & 'combination with a non-default setting of dz_soil' CALL message( 'check_parameters', 'PA0999', 2, 2, 0, 6, 0 ) ENDIF ENDIF ! !-- Temporary message as long as NetCDF input is not available IF ( TRIM( surface_type ) == 'netcdf' .AND. .NOT. input_pids_static ) & THEN message_string = 'surface_type = netcdf requires static input file.' CALL message( 'check_parameters', 'PA0465', 1, 2, 0, 6, 0 ) ENDIF IF ( soil_type == 0 ) THEN IF ( alpha_vangenuchten == 9999999.9_wp ) THEN message_string = 'soil_type = 0 (user_defined)'// & 'requires setting of alpha_vangenuchten'// & '/= 9999999.9' CALL message( 'check_parameters', 'PA0403', 1, 2, 0, 6, 0 ) ENDIF IF ( l_vangenuchten == 9999999.9_wp ) THEN message_string = 'soil_type = 0 (user_defined)'// & 'requires setting of l_vangenuchten'// & '/= 9999999.9' CALL message( 'check_parameters', 'PA0403', 1, 2, 0, 6, 0 ) ENDIF IF ( n_vangenuchten == 9999999.9_wp ) THEN message_string = 'soil_type = 0 (user_defined)'// & 'requires setting of n_vangenuchten'// & '/= 9999999.9' CALL message( 'check_parameters', 'PA0403', 1, 2, 0, 6, 0 ) ENDIF IF ( hydraulic_conductivity == 9999999.9_wp ) THEN message_string = 'soil_type = 0 (user_defined)'// & 'requires setting of hydraulic_conductivity'// & '/= 9999999.9' CALL message( 'check_parameters', 'PA0403', 1, 2, 0, 6, 0 ) ENDIF IF ( saturation_moisture == 9999999.9_wp ) THEN message_string = 'soil_type = 0 (user_defined)'// & 'requires setting of saturation_moisture'// & '/= 9999999.9' CALL message( 'check_parameters', 'PA0403', 1, 2, 0, 6, 0 ) ENDIF IF ( field_capacity == 9999999.9_wp ) THEN message_string = 'soil_type = 0 (user_defined)'// & 'requires setting of field_capacity'// & '/= 9999999.9' CALL message( 'check_parameters', 'PA0403', 1, 2, 0, 6, 0 ) ENDIF IF ( wilting_point == 9999999.9_wp ) THEN message_string = 'soil_type = 0 (user_defined)'// & 'requires setting of wilting_point'// & '/= 9999999.9' CALL message( 'check_parameters', 'PA0403', 1, 2, 0, 6, 0 ) ENDIF IF ( residual_moisture == 9999999.9_wp ) THEN message_string = 'soil_type = 0 (user_defined)'// & 'requires setting of residual_moisture'// & '/= 9999999.9' CALL message( 'check_parameters', 'PA0403', 1, 2, 0, 6, 0 ) ENDIF ENDIF !!! these checks are not needed for water surfaces?? ! !-- Determine number of soil layers to be used and check whether an appropriate !-- root fraction is prescribed nzb_soil = 0 nzt_soil = -1 IF ( ALL( dz_soil == 9999999.9_wp ) ) THEN nzt_soil = 7 dz_soil(nzb_soil:nzt_soil) = dz_soil_default ELSE DO k = 0, 19 IF ( dz_soil(k) /= 9999999.9_wp ) THEN nzt_soil = nzt_soil + 1 ENDIF ENDDO ENDIF nzs = nzt_soil + 1 ! !-- Check whether valid soil temperatures are prescribed IF ( COUNT( soil_temperature /= 9999999.9_wp ) /= nzs ) THEN WRITE( message_string, * ) 'number of soil layers (', nzs, ') does not',& ' match to the number of layers specified', & ' in soil_temperature (', COUNT( & soil_temperature /= 9999999.9_wp ), ')' CALL message( 'check_parameters', 'PA0471', 1, 2, 0, 6, 0 ) ENDIF IF ( deep_soil_temperature == 9999999.9_wp ) THEN message_string = 'deep_soil_temperature is not set but must be'// & '/= 9999999.9' CALL message( 'check_parameters', 'PA0472', 1, 2, 0, 6, 0 ) ENDIF ! !-- Check whether the sum of all root fractions equals one IF ( vegetation_type == 0 ) THEN IF ( SUM( root_fraction(nzb_soil:nzt_soil) ) /= 1.0_wp ) THEN message_string = 'vegetation_type = 0 (user_defined)'// & 'requires setting of root_fraction'// & '/= 9999999.9 and SUM(root_fraction) = 1' CALL message( 'check_parameters', 'PA0401', 1, 2, 0, 6, 0 ) ENDIF ENDIF ! !-- Check for proper setting of soil moisture, must not be larger than its !-- saturation value. DO k = nzb_soil, nzt_soil IF ( soil_moisture(k) > saturation_moisture ) THEN message_string = 'soil_moisture must not exceed its saturation' // & ' value' CALL message( 'check_parameters', 'PA0458', 1, 2, 0, 6, 0 ) ENDIF ENDDO ! !-- Calculate grid spacings. Temperature and moisture are defined at !-- the center of the soil layers, whereas gradients/fluxes are !-- defined at the edges (_layer) ! !-- Allocate global 1D arrays ALLOCATE ( ddz_soil_center(nzb_soil:nzt_soil) ) ALLOCATE ( ddz_soil(nzb_soil:nzt_soil+1) ) ALLOCATE ( dz_soil_center(nzb_soil:nzt_soil) ) ALLOCATE ( zs(nzb_soil:nzt_soil+1) ) zs(nzb_soil) = 0.5_wp * dz_soil(nzb_soil) zs_layer(nzb_soil) = dz_soil(nzb_soil) DO k = nzb_soil+1, nzt_soil zs_layer(k) = zs_layer(k-1) + dz_soil(k) zs(k) = (zs_layer(k) + zs_layer(k-1)) * 0.5_wp ENDDO dz_soil(nzt_soil+1) = zs_layer(nzt_soil) + dz_soil(nzt_soil) zs(nzt_soil+1) = zs_layer(nzt_soil) + 0.5_wp * dz_soil(nzt_soil) DO k = nzb_soil, nzt_soil-1 dz_soil_center(k) = zs(k+1) - zs(k) IF ( dz_soil_center(k) == 0.0_wp ) THEN message_string = 'invalid soil layer configuration found ' // & '(dz_soil_center(k) = 0.0)' CALL message( 'lsm_read_restart_data', 'PA0140', 1, 2, 0, 6, 0 ) ENDIF ENDDO dz_soil_center(nzt_soil) = zs_layer(k-1) + dz_soil(k) - zs(nzt_soil) ddz_soil_center = 1.0_wp / dz_soil_center ddz_soil(nzb_soil:nzt_soil) = 1.0_wp / dz_soil(nzb_soil:nzt_soil) END SUBROUTINE lsm_check_parameters !------------------------------------------------------------------------------! ! Description: ! ------------ !> Solver for the energy balance at the surface. !------------------------------------------------------------------------------! SUBROUTINE lsm_energy_balance( horizontal, l ) USE diagnostic_quantities_mod, & ONLY: magnus USE pegrid IMPLICIT NONE INTEGER(iwp) :: i !< running index INTEGER(iwp) :: i_off !< offset to determine index of surface element, seen from atmospheric grid point, for x INTEGER(iwp) :: j !< running index INTEGER(iwp) :: j_off !< offset to determine index of surface element, seen from atmospheric grid point, for y INTEGER(iwp) :: k !< running index INTEGER(iwp) :: k_off !< offset to determine index of surface element, seen from atmospheric grid point, for z INTEGER(iwp) :: ks !< running index INTEGER(iwp) :: l !< surface-facing index INTEGER(iwp) :: m !< running index concerning wall elements LOGICAL :: horizontal !< Flag indicating horizontal or vertical surfaces REAL(wp) :: c_surface_tmp,& !< temporary variable for storing the volumetric heat capacity of the surface f1, & !< resistance correction term 1 f2, & !< resistance correction term 2 f3, & !< resistance correction term 3 m_min, & !< minimum soil moisture e, & !< water vapour pressure e_s, & !< water vapour saturation pressure e_s_dt, & !< derivate of e_s with respect to T tend, & !< tendency dq_s_dt, & !< derivate of q_s with respect to T coef_1, & !< coef. for prognostic equation coef_2, & !< coef. for prognostic equation f_qsws, & !< factor for qsws f_qsws_veg, & !< factor for qsws_veg f_qsws_soil, & !< factor for qsws_soil f_qsws_liq, & !< factor for qsws_liq f_shf, & !< factor for shf lambda_soil, & !< Thermal conductivity of the uppermost soil layer (W/m2/K) lambda_surface, & !< Current value of lambda_surface (W/m2/K) m_liq_max !< maxmimum value of the liq. water reservoir TYPE(surf_type_lsm), POINTER :: surf_t_surface TYPE(surf_type_lsm), POINTER :: surf_t_surface_p TYPE(surf_type_lsm), POINTER :: surf_tt_surface_m TYPE(surf_type_lsm), POINTER :: surf_m_liq TYPE(surf_type_lsm), POINTER :: surf_m_liq_p TYPE(surf_type_lsm), POINTER :: surf_tm_liq_m TYPE(surf_type_lsm), POINTER :: surf_m_soil TYPE(surf_type_lsm), POINTER :: surf_t_soil TYPE(surf_type), POINTER :: surf !< surface-date type variable IF ( horizontal ) THEN surf => surf_lsm_h surf_t_surface => t_surface_h surf_t_surface_p => t_surface_h_p surf_tt_surface_m => tt_surface_h_m surf_m_liq => m_liq_h surf_m_liq_p => m_liq_h_p surf_tm_liq_m => tm_liq_h_m surf_m_soil => m_soil_h surf_t_soil => t_soil_h ELSE surf => surf_lsm_v(l) surf_t_surface => t_surface_v(l) surf_t_surface_p => t_surface_v_p(l) surf_tt_surface_m => tt_surface_v_m(l) surf_m_liq => m_liq_v(l) surf_m_liq_p => m_liq_v_p(l) surf_tm_liq_m => tm_liq_v_m(l) surf_m_soil => m_soil_v(l) surf_t_soil => t_soil_v(l) ENDIF ! !-- Index offset of surface element point with respect to adjoining !-- atmospheric grid point k_off = surf%koff j_off = surf%joff i_off = surf%ioff ! !-- Calculate the exner function for the current time step exn = ( surface_pressure / 1000.0_wp )**0.286_wp DO m = 1, surf%ns i = surf%i(m) j = surf%j(m) k = surf%k(m) ! !-- Define heat conductivity between surface and soil depending on surface !-- type. For vegetation, a skin layer parameterization is used. The new !-- parameterization uses a combination of two conductivities: a constant !-- conductivity for the skin layer, and a conductivity according to the !-- uppermost soil layer. For bare soil and pavements, no skin layer is !-- applied. In these cases, the temperature is assumed to be constant !-- between the surface and the first soil layer. The heat conductivity is !-- then derived from the soil/pavement properties. !-- For water surfaces, the conductivity is already set to 1E10. !-- Moreover, the heat capacity is set. For bare soil the heat capacity is !-- the capacity of the uppermost soil layer, for pavement it is that of !-- the material involved. ! !-- for vegetation type surfaces, the thermal conductivity of the soil is !-- needed IF ( surf%vegetation_surface(m) ) THEN lambda_h_sat = lambda_h_sm**(1.0_wp - surf%m_sat(nzb_soil,m)) * & lambda_h_water ** surf_m_soil%var_2d(nzb_soil,m) ke = 1.0_wp + LOG10( MAX( 0.1_wp, surf_m_soil%var_2d(nzb_soil,m) / & surf%m_sat(nzb_soil,m) ) ) lambda_soil = (ke * (lambda_h_sat - lambda_h_dry) + lambda_h_dry ) & * ddz_soil(nzb_soil) * 2.0_wp ! !-- When bare soil is set without a thermal conductivity (no skin layer), !-- a heat capacity is that of the soil layer, otherwise it is a !-- combination of the conductivities from the skin and the soil layer IF ( surf%lambda_surface_s(m) == 0.0_wp ) THEN surf%c_surface(m) = (rho_c_soil * (1.0_wp - surf%m_sat(nzb_soil,m))& + rho_c_water * surf_m_soil%var_2d(nzb_soil,m) ) & * dz_soil(nzb_soil) * 0.5_wp lambda_surface = lambda_soil ELSE IF ( surf_t_surface%var_1d(m) >= surf_t_soil%var_2d(nzb_soil,m))& THEN lambda_surface = surf%lambda_surface_s(m) * lambda_soil & / ( surf%lambda_surface_s(m) + lambda_soil ) ELSE lambda_surface = surf%lambda_surface_u(m) * lambda_soil & / ( surf%lambda_surface_u(m) + lambda_soil ) ENDIF ELSE lambda_surface = surf%lambda_surface_s(m) ENDIF ! !-- Set heat capacity of the skin/surface. It is ususally zero when a skin !-- layer is used, and non-zero otherwise. c_surface_tmp = surf%c_surface(m) ! !-- First step: calculate aerodyamic resistance. As pt, us, ts !-- are not available for the prognostic time step, data from the last !-- time step is used here. Note that this formulation is the !-- equivalent to the ECMWF formulation using drag coefficients ! IF ( cloud_physics ) THEN ! pt1 = pt(k,j,i) + l_d_cp * pt_d_t(k) * ql(k,j,i) ! qv1 = q(k,j,i) - ql(k,j,i) ! ELSEIF ( cloud_droplets ) THEN ! pt1 = pt(k,j,i) + l_d_cp * pt_d_t(k) * ql(k,j,i) ! qv1 = q(k,j,i) ! ELSE ! pt1 = pt(k,j,i) ! IF ( humidity ) THEN ! qv1 = q(k,j,i) ! ELSE ! qv1 = 0.0_wp ! ENDIF ! ENDIF ! !-- Calculation of r_a for vertical surfaces !-- !-- heat transfer coefficient for forced convection along vertical walls !-- follows formulation in TUF3d model (Krayenhoff & Voogt, 2006) !-- !-- H = httc (Tsfc - Tair) !-- httc = rw * (11.8 + 4.2 * Ueff) - 4.0 !-- !-- rw: wall patch roughness relative to 1.0 for concrete !-- Ueff: effective wind speed !-- - 4.0 is a reduction of Rowley et al (1930) formulation based on !-- Cole and Sturrock (1977) !-- !-- Ucan: Canyon wind speed !-- wstar: convective velocity !-- Qs: surface heat flux !-- zH: height of the convective layer !-- wstar = (g/Tcan*Qs*zH)**(1./3.) !-- Effective velocity components must always !-- be defined at scalar grid point. The wall normal component is !-- obtained by simple linear interpolation. ( An alternative would !-- be an logarithmic interpolation. ) !-- A roughness lenght of 0.001 is assumed for concrete (the inverse, !-- 1000 is used in the nominator for scaling) !-- To do: detailed investigation which approach gives more reliable results! !-- Please note, in case of very small friction velocity, e.g. in little !-- holes, the resistance can become negative. For this reason, limit r_a !-- to positive values. IF ( horizontal .OR. .NOT. aero_resist_kray ) THEN surf%r_a(m) = ABS( ( surf%pt1(m) - surf%pt_surface(m) ) / & ( surf%ts(m) * surf%us(m) + 1.0E-20_wp ) ) ELSE surf%r_a(m) = rho_cp / ( surf%z0(m) * 1000.0_wp & * ( 11.8_wp + 4.2_wp * & SQRT( MAX( ( ( u(k,j,i) + u(k,j,i+1) ) * 0.5_wp )**2 + & ( ( v(k,j,i) + v(k,j+1,i) ) * 0.5_wp )**2 + & ( ( w(k,j,i) + w(k-1,j,i) ) * 0.5_wp )**2, & 0.01_wp ) ) & ) - 4.0_wp ) ENDIF ! !-- Make sure that the resistance does not drop to zero for neutral !-- stratification. IF ( surf%r_a(m) < 1.0_wp ) surf%r_a(m) = 1.0_wp ! !-- Second step: calculate canopy resistance r_canopy !-- f1-f3 here are defined as 1/f1-f3 as in ECMWF documentation !-- f1: correction for incoming shortwave radiation (stomata close at !-- night) f1 = MIN( 1.0_wp, ( 0.004_wp * surf%rad_sw_in(m) + 0.05_wp ) / & (0.81_wp * (0.004_wp * surf%rad_sw_in(m) & + 1.0_wp)) ) ! !-- f2: correction for soil moisture availability to plants (the !-- integrated soil moisture must thus be considered here) !-- f2 = 0 for very dry soils m_total = 0.0_wp DO ks = nzb_soil, nzt_soil m_total = m_total + surf%root_fr(ks,m) & * MAX( surf_m_soil%var_2d(ks,m), surf%m_wilt(ks,m) ) ENDDO ! !-- The calculation of f2 is based on only one wilting point value for all !-- soil layers. The value at k=nzb_soil is used here as a proxy but might !-- need refinement in the future. IF ( m_total > surf%m_wilt(nzb_soil,m) .AND. & m_total < surf%m_fc(nzb_soil,m) ) THEN f2 = ( m_total - surf%m_wilt(nzb_soil,m) ) / & ( surf%m_fc(nzb_soil,m) - surf%m_wilt(nzb_soil,m) ) ELSEIF ( m_total >= surf%m_fc(nzb_soil,m) ) THEN f2 = 1.0_wp ELSE f2 = 1.0E-20_wp ENDIF ! !-- Calculate water vapour pressure at saturation and convert to hPa e_s = 0.01_wp * magnus( surf_t_surface%var_1d(m) ) ! !-- f3: correction for vapour pressure deficit IF ( surf%g_d(m) /= 0.0_wp ) THEN ! !-- Calculate vapour pressure e = surf%qv1(m) * surface_pressure / ( surf%qv1(m) + 0.622_wp ) f3 = EXP ( - surf%g_d(m) * (e_s - e) ) ELSE f3 = 1.0_wp ENDIF ! !-- Calculate canopy resistance. In case that c_veg is 0 (bare soils), !-- this calculation is obsolete, as r_canopy is not used below. !-- To do: check for very dry soil -> r_canopy goes to infinity surf%r_canopy(m) = surf%r_canopy_min(m) / & ( surf%lai(m) * f1 * f2 * f3 + 1.0E-20_wp ) ! !-- Third step: calculate bare soil resistance r_soil. m_min = surf%c_veg(m) * surf%m_wilt(nzb_soil,m) + & ( 1.0_wp - surf%c_veg(m) ) * surf%m_res(nzb_soil,m) f2 = ( surf_m_soil%var_2d(nzb_soil,m) - m_min ) / & ( surf%m_fc(nzb_soil,m) - m_min ) f2 = MAX( f2, 1.0E-20_wp ) f2 = MIN( f2, 1.0_wp ) surf%r_soil(m) = surf%r_soil_min(m) / f2 ! !-- Calculate the maximum possible liquid water amount on plants and !-- bare surface. For vegetated surfaces, a maximum depth of 0.2 mm is !-- assumed, while paved surfaces might hold up 1 mm of water. The !-- liquid water fraction for paved surfaces is calculated after !-- Noilhan & Planton (1989), while the ECMWF formulation is used for !-- vegetated surfaces and bare soils. IF ( surf%pavement_surface(m) ) THEN m_liq_max = m_max_depth * 5.0_wp surf%c_liq(m) = MIN( 1.0_wp, ( surf_m_liq%var_1d(m) / m_liq_max)**0.67 ) ELSE m_liq_max = m_max_depth * ( surf%c_veg(m) * surf%lai(m) & + ( 1.0_wp - surf%c_veg(m) ) ) surf%c_liq(m) = MIN( 1.0_wp, surf_m_liq%var_1d(m) / m_liq_max ) ENDIF ! !-- Calculate saturation specific humidity q_s = 0.622_wp * e_s / ( surface_pressure - e_s ) ! !-- In case of dewfall, set evapotranspiration to zero !-- All super-saturated water is then removed from the air IF ( humidity .AND. q_s <= surf%qv1(m) ) THEN surf%r_canopy(m) = 0.0_wp surf%r_soil(m) = 0.0_wp ENDIF ! !-- Calculate coefficients for the total evapotranspiration !-- In case of water surface, set vegetation and soil fluxes to zero. !-- For pavements, only evaporation of liquid water is possible. IF ( surf%water_surface(m) ) THEN f_qsws_veg = 0.0_wp f_qsws_soil = 0.0_wp f_qsws_liq = rho_lv / surf%r_a(m) ELSEIF ( surf%pavement_surface (m) ) THEN f_qsws_veg = 0.0_wp f_qsws_soil = 0.0_wp f_qsws_liq = rho_lv * surf%c_liq(m) / surf%r_a(m) ELSE f_qsws_veg = rho_lv * surf%c_veg(m) * & ( 1.0_wp - surf%c_liq(m) ) / & ( surf%r_a(m) + surf%r_canopy(m) ) f_qsws_soil = rho_lv * (1.0_wp - surf%c_veg(m) ) / & ( surf%r_a(m) + surf%r_soil(m) ) f_qsws_liq = rho_lv * surf%c_veg(m) * surf%c_liq(m) / & surf%r_a(m) ENDIF f_shf = rho_cp / surf%r_a(m) f_qsws = f_qsws_veg + f_qsws_soil + f_qsws_liq ! !-- Calculate derivative of q_s for Taylor series expansion e_s_dt = e_s * ( 17.62_wp / ( surf_t_surface%var_1d(m) - 29.65_wp) - & 17.62_wp*( surf_t_surface%var_1d(m) - 273.15_wp) & / ( surf_t_surface%var_1d(m) - 29.65_wp)**2 ) dq_s_dt = 0.622_wp * e_s_dt / ( surface_pressure - e_s_dt ) ! !-- Calculate net radiation radiation without longwave outgoing flux because !-- it has a dependency on surface temperature and thus enters the prognostic !-- equations directly surf%rad_net_l(m) = surf%rad_sw_in(m) - surf%rad_sw_out(m) & + surf%rad_lw_in(m) ! !-- Calculate new skin temperature IF ( humidity ) THEN ! !-- Numerator of the prognostic equation coef_1 = surf%rad_net_l(m) + surf%rad_lw_out_change_0(m) & * surf_t_surface%var_1d(m) - surf%rad_lw_out(m) & + f_shf * surf%pt1(m) + f_qsws * ( surf%qv1(m) - q_s & + dq_s_dt * surf_t_surface%var_1d(m) ) + lambda_surface & * surf_t_soil%var_2d(nzb_soil,m) ! !-- Denominator of the prognostic equation coef_2 = surf%rad_lw_out_change_0(m) + f_qsws * dq_s_dt & + lambda_surface + f_shf / exn ELSE ! !-- Numerator of the prognostic equation coef_1 = surf%rad_net_l(m) + surf%rad_lw_out_change_0(m) & * surf_t_surface%var_1d(m) - surf%rad_lw_out(m) & + f_shf * surf%pt1(m) + lambda_surface & * surf_t_soil%var_2d(nzb_soil,m) ! !-- Denominator of the prognostic equation coef_2 = surf%rad_lw_out_change_0(m) + lambda_surface + f_shf / exn ENDIF tend = 0.0_wp ! !-- Implicit solution when the surface layer has no heat capacity, !-- otherwise use RK3 scheme. surf_t_surface_p%var_1d(m) = ( coef_1 * dt_3d * tsc(2) + c_surface_tmp *& surf_t_surface%var_1d(m) ) / ( c_surface_tmp + coef_2& * dt_3d * tsc(2) ) ! !-- Add RK3 term IF ( c_surface_tmp /= 0.0_wp ) THEN surf_t_surface_p%var_1d(m) = surf_t_surface_p%var_1d(m) + dt_3d * & tsc(3) * surf_tt_surface_m%var_1d(m) ! !-- Calculate true tendency tend = ( surf_t_surface_p%var_1d(m) - surf_t_surface%var_1d(m) - & dt_3d * tsc(3) * surf_tt_surface_m%var_1d(m)) / (dt_3d * tsc(2)) ! !-- Calculate t_surface tendencies for the next Runge-Kutta step IF ( timestep_scheme(1:5) == 'runge' ) THEN IF ( intermediate_timestep_count == 1 ) THEN surf_tt_surface_m%var_1d(m) = tend ELSEIF ( intermediate_timestep_count < & intermediate_timestep_count_max ) THEN surf_tt_surface_m%var_1d(m) = -9.5625_wp * tend + & 5.3125_wp * surf_tt_surface_m%var_1d(m) ENDIF ENDIF ENDIF ! !-- In case of fast changes in the skin temperature, it is possible to !-- update the radiative fluxes independently from the prescribed !-- radiation call frequency. This effectively prevents oscillations, !-- especially when setting skip_time_do_radiation /= 0. The threshold !-- value of 0.2 used here is just a first guess. This method should be !-- revised in the future as tests have shown that the threshold is !-- often reached, when no oscillations would occur (causes immense !-- computing time for the radiation code). IF ( ABS( surf_t_surface_p%var_1d(m) - surf_t_surface%var_1d(m) ) & > 0.2_wp .AND. & unscheduled_radiation_calls ) THEN force_radiation_call_l = .TRUE. ENDIF ! pt(k+k_off,j+j_off,i+i_off) = surf_t_surface_p%var_1d(m) / exn !is actually no air temperature surf%pt_surface(m) = surf_t_surface_p%var_1d(m) / exn ! !-- Calculate fluxes surf%rad_net_l(m) = surf%rad_net_l(m) + & surf%rad_lw_out_change_0(m) & * surf_t_surface%var_1d(m) - surf%rad_lw_out(m) & - surf%rad_lw_out_change_0(m) * surf_t_surface_p%var_1d(m) surf%rad_net(m) = surf%rad_net_l(m) surf%rad_lw_out(m) = surf%rad_lw_out(m) + surf%rad_lw_out_change_0(m) * & ( surf_t_surface_p%var_1d(m) - surf_t_surface%var_1d(m) ) surf%ghf(m) = lambda_surface * ( surf_t_surface_p%var_1d(m) & - surf_t_soil%var_2d(nzb_soil,m) ) surf%shf(m) = - f_shf * ( surf%pt1(m) - surf%pt_surface(m) ) / cp IF ( humidity ) THEN surf%qsws(m) = - f_qsws * ( surf%qv1(m) - q_s + dq_s_dt & * surf_t_surface%var_1d(m) - dq_s_dt * & surf_t_surface_p%var_1d(m) ) surf%qsws_veg(m) = - f_qsws_veg * ( surf%qv1(m) - q_s & + dq_s_dt * surf_t_surface%var_1d(m) - dq_s_dt & * surf_t_surface_p%var_1d(m) ) surf%qsws_soil(m) = - f_qsws_soil * ( surf%qv1(m) - q_s & + dq_s_dt * surf_t_surface%var_1d(m) - dq_s_dt & * surf_t_surface_p%var_1d(m) ) surf%qsws_liq(m) = - f_qsws_liq * ( surf%qv1(m) - q_s & + dq_s_dt * surf_t_surface%var_1d(m) - dq_s_dt & * surf_t_surface_p%var_1d(m) ) ENDIF ! !-- Calculate the true surface resistance IF ( .NOT. humidity ) THEN surf%r_s(m) = 1.0E10_wp ELSE surf%r_s(m) = - rho_lv * ( surf%qv1(m) - q_s + dq_s_dt & * surf_t_surface%var_1d(m) - dq_s_dt * & surf_t_surface_p%var_1d(m) ) / & (surf%qsws(m) + 1.0E-20) - surf%r_a(m) ENDIF ! !-- Calculate change in liquid water reservoir due to dew fall or !-- evaporation of liquid water IF ( humidity ) THEN ! !-- If precipitation is activated, add rain water to qsws_liq !-- and qsws_soil according the the vegetation coverage. !-- precipitation_rate is given in mm. IF ( precipitation ) THEN ! !-- Add precipitation to liquid water reservoir, if possible. !-- Otherwise, add the water to soil. In case of !-- pavements, the exceeding water amount is implicitely removed !-- as runoff as qsws_soil is then not used in the soil model IF ( surf_m_liq%var_1d(m) /= m_liq_max ) THEN surf%qsws_liq(m) = surf%qsws_liq(m) & + surf%c_veg(m) * prr(k+k_off,j+j_off,i+i_off)& * hyrho(k+k_off) & * 0.001_wp * rho_l * l_v ELSE surf%qsws_soil(m) = surf%qsws_soil(m) & + surf%c_veg(m) * prr(k+k_off,j+j_off,i+i_off)& * hyrho(k+k_off) & * 0.001_wp * rho_l * l_v ENDIF !-- Add precipitation to bare soil according to the bare soil !-- coverage. surf%qsws_soil(m) = surf%qsws_soil(m) + ( 1.0_wp & - surf%c_veg(m) ) * prr(k+k_off,j+j_off,i+i_off)& * hyrho(k+k_off) & * 0.001_wp * rho_l * l_v ENDIF ! !-- If the air is saturated, check the reservoir water level IF ( surf%qsws(m) < 0.0_wp ) THEN ! !-- Check if reservoir is full (avoid values > m_liq_max) !-- In that case, qsws_liq goes to qsws_soil. In this !-- case qsws_veg is zero anyway (because c_liq = 1), !-- so that tend is zero and no further check is needed IF ( surf_m_liq%var_1d(m) == m_liq_max ) THEN surf%qsws_soil(m) = surf%qsws_soil(m) + surf%qsws_liq(m) surf%qsws_liq(m) = 0.0_wp ENDIF ! !-- In case qsws_veg becomes negative (unphysical behavior), !-- let the water enter the liquid water reservoir as dew on the !-- plant IF ( surf%qsws_veg(m) < 0.0_wp ) THEN surf%qsws_liq(m) = surf%qsws_liq(m) + surf%qsws_veg(m) surf%qsws_veg(m) = 0.0_wp ENDIF ENDIF surf%qsws(m) = surf%qsws(m) / l_v tend = - surf%qsws_liq(m) * drho_l_lv surf_m_liq_p%var_1d(m) = surf_m_liq%var_1d(m) + dt_3d * & ( tsc(2) * tend + & tsc(3) * surf_tm_liq_m%var_1d(m) ) ! !-- Check if reservoir is overfull -> reduce to maximum !-- (conservation of water is violated here) surf_m_liq_p%var_1d(m) = MIN( surf_m_liq_p%var_1d(m),m_liq_max ) ! !-- Check if reservoir is empty (avoid values < 0.0) !-- (conservation of water is violated here) surf_m_liq_p%var_1d(m) = MAX( surf_m_liq_p%var_1d(m), 0.0_wp ) ! !-- Calculate m_liq tendencies for the next Runge-Kutta step IF ( timestep_scheme(1:5) == 'runge' ) THEN IF ( intermediate_timestep_count == 1 ) THEN surf_tm_liq_m%var_1d(m) = tend ELSEIF ( intermediate_timestep_count < & intermediate_timestep_count_max ) THEN surf_tm_liq_m%var_1d(m) = -9.5625_wp * tend + & 5.3125_wp * surf_tm_liq_m%var_1d(m) ENDIF ENDIF ENDIF ENDDO ! !-- Make a logical OR for all processes. Force radiation call if at !-- least one processor reached the threshold change in skin temperature IF ( unscheduled_radiation_calls .AND. intermediate_timestep_count & == intermediate_timestep_count_max-1 ) THEN #if defined( __parallel ) IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr ) CALL MPI_ALLREDUCE( force_radiation_call_l, force_radiation_call, & 1, MPI_LOGICAL, MPI_LOR, comm2d, ierr ) #else force_radiation_call = force_radiation_call_l #endif force_radiation_call_l = .FALSE. ENDIF ! !-- Calculate surface specific humidity IF ( humidity ) THEN CALL calc_q_surface ENDIF ! !-- Calculate new roughness lengths (for water surfaces only) IF ( horizontal .AND. .NOT. constant_roughness ) CALL calc_z0_water_surface CONTAINS !------------------------------------------------------------------------------! ! Description: ! ------------ !> Calculation of specific humidity of the skin layer (surface). It is assumend !> that the skin is always saturated. !------------------------------------------------------------------------------! SUBROUTINE calc_q_surface USE diagnostic_quantities_mod IMPLICIT NONE REAL(wp) :: resistance !< aerodynamic and soil resistance term DO m = 1, surf%ns i = surf%i(m) j = surf%j(m) k = surf%k(m) ! !-- Calculate water vapour pressure at saturation and convert to hPa e_s = 0.01_wp * magnus( surf_t_surface_p%var_1d(m) ) ! !-- Calculate specific humidity at saturation q_s = 0.622_wp * e_s / ( surface_pressure - e_s ) resistance = surf%r_a(m) / ( surf%r_a(m) + surf%r_s(m) + 1E-5_wp ) ! !-- Calculate specific humidity at surface IF ( cloud_physics ) THEN q(k+k_off,j+j_off,i+i_off) = resistance * q_s + & ( 1.0_wp - resistance ) * & ( q(k,j,i) - ql(k,j,i) ) ELSE q(k+k_off,j+j_off,i+i_off) = resistance * q_s + & ( 1.0_wp - resistance ) * & q(k,j,i) ENDIF ! !-- Update virtual potential temperature vpt(k+k_off,j+j_off,i+i_off) = pt(k+k_off,j+j_off,i+i_off) * & ( 1.0_wp + 0.61_wp * q(k+k_off,j+j_off,i+i_off) ) ENDDO END SUBROUTINE calc_q_surface END SUBROUTINE lsm_energy_balance !------------------------------------------------------------------------------! ! Description: ! ------------ !> Header output for land surface model !------------------------------------------------------------------------------! SUBROUTINE lsm_header ( io ) IMPLICIT NONE CHARACTER (LEN=86) :: t_soil_chr !< String for soil temperature profile CHARACTER (LEN=86) :: roots_chr !< String for root profile CHARACTER (LEN=86) :: vertical_index_chr !< String for the vertical index CHARACTER (LEN=86) :: m_soil_chr !< String for soil moisture CHARACTER (LEN=86) :: soil_depth_chr !< String for soil depth CHARACTER (LEN=10) :: coor_chr !< Temporary string INTEGER(iwp) :: i !< Loop index over soil layers INTEGER(iwp), INTENT(IN) :: io !< Unit of the output file t_soil_chr = '' m_soil_chr = '' soil_depth_chr = '' roots_chr = '' vertical_index_chr = '' i = 1 DO i = nzb_soil, nzt_soil WRITE (coor_chr,'(F10.2,7X)') soil_temperature(i) t_soil_chr = TRIM( t_soil_chr ) // ' ' // TRIM( coor_chr ) WRITE (coor_chr,'(F10.2,7X)') soil_moisture(i) m_soil_chr = TRIM( m_soil_chr ) // ' ' // TRIM( coor_chr ) WRITE (coor_chr,'(F10.2,7X)') - zs(i) soil_depth_chr = TRIM( soil_depth_chr ) // ' ' // TRIM( coor_chr ) WRITE (coor_chr,'(F10.2,7X)') root_fraction(i) roots_chr = TRIM( roots_chr ) // ' ' // TRIM( coor_chr ) WRITE (coor_chr,'(I10,7X)') i vertical_index_chr = TRIM( vertical_index_chr ) // ' ' // & TRIM( coor_chr ) ENDDO ! !-- Write land surface model header WRITE( io, 1 ) IF ( conserve_water_content ) THEN WRITE( io, 2 ) ELSE WRITE( io, 3 ) ENDIF IF ( vegetation_type_f%from_file ) THEN WRITE( io, 5 ) ELSE WRITE( io, 4 ) TRIM( vegetation_type_name(vegetation_type) ), & TRIM (soil_type_name(soil_type) ) ENDIF WRITE( io, 6 ) TRIM( soil_depth_chr ), TRIM( t_soil_chr ), & TRIM( m_soil_chr ), TRIM( roots_chr ), & TRIM( vertical_index_chr ) 1 FORMAT (//' Land surface model information:'/ & ' ------------------------------'/) 2 FORMAT (' --> Soil bottom is closed (water content is conserved', & ', default)') 3 FORMAT (' --> Soil bottom is open (water content is not conserved)') 4 FORMAT (' --> Land surface type : ',A,/ & ' --> Soil porosity type : ',A) 5 FORMAT (' --> Land surface type : read from file' / & ' --> Soil porosity type : read from file' ) 6 FORMAT (/' Initial soil temperature and moisture profile:'// & ' Height: ',A,' m'/ & ' Temperature: ',A,' K'/ & ' Moisture: ',A,' m**3/m**3'/ & ' Root fraction: ',A,' '/ & ' Grid point: ',A) END SUBROUTINE lsm_header !------------------------------------------------------------------------------! ! Description: ! ------------ !> Initialization of the land surface model !------------------------------------------------------------------------------! SUBROUTINE lsm_init USE control_parameters, & ONLY: message_string IMPLICIT NONE INTEGER(iwp) :: i !< running index INTEGER(iwp) :: i_off !< index offset of surface element, seen from atmospheric grid point INTEGER(iwp) :: j !< running index INTEGER(iwp) :: j_off !< index offset of surface element, seen from atmospheric grid point INTEGER(iwp) :: k !< running index INTEGER(iwp) :: kn !< running index INTEGER(iwp) :: ko !< running index INTEGER(iwp) :: kroot !< running index INTEGER(iwp) :: kzs !< running index INTEGER(iwp) :: l !< running index surface facing INTEGER(iwp) :: m !< running index INTEGER(iwp) :: st !< soil-type index INTEGER(iwp) :: n_soil_layers_total !< temperature variable, stores the total number of soil layers + 4 INTEGER(iwp) :: n_surf !< number of surface types of given surface element REAL(wp), DIMENSION(:), ALLOCATABLE :: bound, bound_root_fr !< temporary arrays for storing index bounds ! !-- Calculate Exner function exn = ( surface_pressure / 1000.0_wp )**0.286_wp ! !-- If no cloud physics is used, rho_surface has not been calculated before IF ( .NOT. cloud_physics ) THEN CALL calc_mean_profile( pt, 4 ) rho_surface = surface_pressure * 100.0_wp / ( r_d * hom(nzb+1,1,4,0) * exn ) ENDIF ! !-- Calculate frequently used parameters rho_cp = cp * rho_surface rd_d_rv = r_d / r_v rho_lv = rho_surface * l_v drho_l_lv = 1.0_wp / (rho_l * l_v) ! !-- Set initial values for prognostic quantities !-- Horizontal surfaces tt_surface_h_m%var_1d = 0.0_wp tt_soil_h_m%var_2d = 0.0_wp tm_soil_h_m%var_2d = 0.0_wp tm_liq_h_m%var_1d = 0.0_wp surf_lsm_h%c_liq = 0.0_wp surf_lsm_h%ghf = 0.0_wp surf_lsm_h%qsws_liq = 0.0_wp surf_lsm_h%qsws_soil = 0.0_wp surf_lsm_h%qsws_veg = 0.0_wp surf_lsm_h%r_a = 50.0_wp surf_lsm_h%r_s = 50.0_wp surf_lsm_h%r_canopy = 0.0_wp surf_lsm_h%r_soil = 0.0_wp ! !-- Do the same for vertical surfaces DO l = 0, 3 tt_surface_v_m(l)%var_1d = 0.0_wp tt_soil_v_m(l)%var_2d = 0.0_wp tm_soil_v_m(l)%var_2d = 0.0_wp tm_liq_v_m(l)%var_1d = 0.0_wp surf_lsm_v(l)%c_liq = 0.0_wp surf_lsm_v(l)%ghf = 0.0_wp surf_lsm_v(l)%qsws_liq = 0.0_wp surf_lsm_v(l)%qsws_soil = 0.0_wp surf_lsm_v(l)%qsws_veg = 0.0_wp surf_lsm_v(l)%r_a = 50.0_wp surf_lsm_v(l)%r_s = 50.0_wp surf_lsm_v(l)%r_canopy = 0.0_wp surf_lsm_v(l)%r_soil = 0.0_wp ENDDO ! !-- Set initial values for prognostic soil quantities IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN t_soil_h%var_2d = 0.0_wp m_soil_h%var_2d = 0.0_wp m_liq_h%var_1d = 0.0_wp DO l = 0, 3 t_soil_v(l)%var_2d = 0.0_wp m_soil_v(l)%var_2d = 0.0_wp m_liq_v(l)%var_1d = 0.0_wp ENDDO ENDIF ! !-- Allocate 3D soil model arrays !-- First, for horizontal surfaces ALLOCATE ( surf_lsm_h%alpha_vg(nzb_soil:nzt_soil,1:surf_lsm_h%ns) ) ALLOCATE ( surf_lsm_h%gamma_w_sat(nzb_soil:nzt_soil,1:surf_lsm_h%ns) ) ALLOCATE ( surf_lsm_h%lambda_h(nzb_soil:nzt_soil,1:surf_lsm_h%ns) ) ALLOCATE ( surf_lsm_h%lambda_h_def(nzb_soil:nzt_soil,1:surf_lsm_h%ns)) ALLOCATE ( surf_lsm_h%l_vg(nzb_soil:nzt_soil,1:surf_lsm_h%ns) ) ALLOCATE ( surf_lsm_h%m_fc(nzb_soil:nzt_soil,1:surf_lsm_h%ns) ) ALLOCATE ( surf_lsm_h%m_res(nzb_soil:nzt_soil,1:surf_lsm_h%ns) ) ALLOCATE ( surf_lsm_h%m_sat(nzb_soil:nzt_soil,1:surf_lsm_h%ns) ) ALLOCATE ( surf_lsm_h%m_wilt(nzb_soil:nzt_soil,1:surf_lsm_h%ns) ) ALLOCATE ( surf_lsm_h%n_vg(nzb_soil:nzt_soil,1:surf_lsm_h%ns) ) ALLOCATE ( surf_lsm_h%rho_c_total(nzb_soil:nzt_soil,1:surf_lsm_h%ns) ) ALLOCATE ( surf_lsm_h%rho_c_total_def(nzb_soil:nzt_soil,1:surf_lsm_h%ns) ) ALLOCATE ( surf_lsm_h%root_fr(nzb_soil:nzt_soil,1:surf_lsm_h%ns) ) surf_lsm_h%lambda_h = 0.0_wp ! !-- If required, allocate humidity-related variables for the soil model IF ( humidity ) THEN ALLOCATE ( surf_lsm_h%lambda_w(nzb_soil:nzt_soil,1:surf_lsm_h%ns) ) ALLOCATE ( surf_lsm_h%gamma_w(nzb_soil:nzt_soil,1:surf_lsm_h%ns) ) surf_lsm_h%lambda_w = 0.0_wp ENDIF ! !-- For vertical surfaces DO l = 0, 3 ALLOCATE ( surf_lsm_v(l)%alpha_vg(nzb_soil:nzt_soil,1:surf_lsm_v(l)%ns) ) ALLOCATE ( surf_lsm_v(l)%gamma_w_sat(nzb_soil:nzt_soil,1:surf_lsm_v(l)%ns) ) ALLOCATE ( surf_lsm_v(l)%lambda_h(nzb_soil:nzt_soil,1:surf_lsm_v(l)%ns) ) ALLOCATE ( surf_lsm_v(l)%lambda_h_def(nzb_soil:nzt_soil,1:surf_lsm_v(l)%ns)) ALLOCATE ( surf_lsm_v(l)%l_vg(nzb_soil:nzt_soil,1:surf_lsm_v(l)%ns) ) ALLOCATE ( surf_lsm_v(l)%m_fc(nzb_soil:nzt_soil,1:surf_lsm_v(l)%ns) ) ALLOCATE ( surf_lsm_v(l)%m_res(nzb_soil:nzt_soil,1:surf_lsm_v(l)%ns) ) ALLOCATE ( surf_lsm_v(l)%m_sat(nzb_soil:nzt_soil,1:surf_lsm_v(l)%ns) ) ALLOCATE ( surf_lsm_v(l)%m_wilt(nzb_soil:nzt_soil,1:surf_lsm_v(l)%ns) ) ALLOCATE ( surf_lsm_v(l)%n_vg(nzb_soil:nzt_soil,1:surf_lsm_v(l)%ns) ) ALLOCATE ( surf_lsm_v(l)%rho_c_total(nzb_soil:nzt_soil,1:surf_lsm_v(l)%ns) ) ALLOCATE ( surf_lsm_v(l)%rho_c_total_def(nzb_soil:nzt_soil,1:surf_lsm_v(l)%ns) ) ALLOCATE ( surf_lsm_v(l)%root_fr(nzb_soil:nzt_soil,1:surf_lsm_v(l)%ns) ) surf_lsm_v(l)%lambda_h = 0.0_wp ! !-- If required, allocate humidity-related variables for the soil model IF ( humidity ) THEN ALLOCATE ( surf_lsm_v(l)%lambda_w(nzb_soil:nzt_soil,1:surf_lsm_v(l)%ns) ) ALLOCATE ( surf_lsm_v(l)%gamma_w(nzb_soil:nzt_soil,1:surf_lsm_v(l)%ns) ) surf_lsm_v(l)%lambda_w = 0.0_wp ENDIF ENDDO ! !-- Allocate albedo type and emissivity for vegetation, water and pavement !-- fraction. !-- Set default values at each surface element. ALLOCATE ( surf_lsm_h%albedo_type(0:2,1:surf_lsm_h%ns) ) ALLOCATE ( surf_lsm_h%emissivity(0:2,1:surf_lsm_h%ns) ) surf_lsm_h%albedo_type = 0 surf_lsm_h%emissivity = emissivity DO l = 0, 3 ALLOCATE ( surf_lsm_v(l)%albedo_type(0:2,1:surf_lsm_v(l)%ns) ) ALLOCATE ( surf_lsm_v(l)%emissivity(0:2,1:surf_lsm_v(l)%ns) ) surf_lsm_v(l)%albedo_type = 0 surf_lsm_v(l)%emissivity = emissivity ENDDO ! !-- Allocate arrays for relative surface fraction. !-- 0 - vegetation fraction, 2 - water fraction, 1 - pavement fraction ALLOCATE( surf_lsm_h%frac(0:2,1:surf_lsm_h%ns) ) surf_lsm_h%frac = 0.0_wp DO l = 0, 3 ALLOCATE( surf_lsm_v(l)%frac(0:2,1:surf_lsm_v(l)%ns) ) surf_lsm_v(l)%frac = 0.0_wp ENDDO ! !-- For vertical walls only - allocate special flag indicating if any building is on !-- top of any natural surfaces. Used for initialization only. DO l = 0, 3 ALLOCATE( surf_lsm_v(l)%building_covered(1:surf_lsm_v(l)%ns) ) ENDDO ! !-- Set flag parameter for the prescribed surface type depending on user !-- input. Set surface fraction to 1 for the respective type. SELECT CASE ( TRIM( surface_type ) ) CASE ( 'vegetation' ) surf_lsm_h%vegetation_surface = .TRUE. surf_lsm_h%frac(ind_veg,:) = 1.0_wp DO l = 0, 3 surf_lsm_v(l)%vegetation_surface = .TRUE. surf_lsm_v(l)%frac(ind_veg,:) = 1.0_wp ENDDO CASE ( 'water' ) surf_lsm_h%water_surface = .TRUE. surf_lsm_h%frac(ind_wat,:) = 1.0_wp ! !-- Note, vertical water surface does not really make sense. DO l = 0, 3 surf_lsm_v(l)%water_surface = .TRUE. surf_lsm_v(l)%frac(ind_wat,:) = 1.0_wp ENDDO CASE ( 'pavement' ) surf_lsm_h%pavement_surface = .TRUE. surf_lsm_h%frac(ind_pav,:) = 1.0_wp DO l = 0, 3 surf_lsm_v(l)%pavement_surface = .TRUE. surf_lsm_v(l)%frac(ind_pav,:) = 1.0_wp ENDDO CASE ( 'netcdf' ) DO m = 1, surf_lsm_h%ns i = surf_lsm_h%i(m) j = surf_lsm_h%j(m) IF ( vegetation_type_f%var(j,i) /= vegetation_type_f%fill ) & surf_lsm_h%vegetation_surface(m) = .TRUE. IF ( pavement_type_f%var(j,i) /= pavement_type_f%fill ) & surf_lsm_h%pavement_surface(m) = .TRUE. IF ( water_type_f%var(j,i) /= water_type_f%fill ) & surf_lsm_h%water_surface(m) = .TRUE. ENDDO DO l = 0, 3 DO m = 1, surf_lsm_v(l)%ns ! !-- Only for vertical surfaces. Check if natural walls at reference !-- grid point are covered by any building. This case, problems !-- with initialization will aris if index offsets are used. !-- In order to deal with this, set special flag. surf_lsm_v(l)%building_covered(m) = .FALSE. IF ( building_type_f%from_file ) THEN i = surf_lsm_v(l)%i(m) + surf_lsm_v(l)%ioff j = surf_lsm_v(l)%j(m) + surf_lsm_v(l)%joff IF ( building_type_f%var(j,i) /= 0 ) & surf_lsm_v(l)%building_covered(m) = .TRUE. ENDIF ! !-- Normally proceed with setting surface types. i = surf_lsm_v(l)%i(m) + MERGE( 0, surf_lsm_v(l)%ioff, & surf_lsm_v(l)%building_covered(m) ) j = surf_lsm_v(l)%j(m) + MERGE( 0, surf_lsm_v(l)%joff, & surf_lsm_v(l)%building_covered(m) ) IF ( vegetation_type_f%var(j,i) /= vegetation_type_f%fill ) & surf_lsm_v(l)%vegetation_surface(m) = .TRUE. IF ( pavement_type_f%var(j,i) /= pavement_type_f%fill ) & surf_lsm_v(l)%pavement_surface(m) = .TRUE. IF ( water_type_f%var(j,i) /= water_type_f%fill ) & surf_lsm_v(l)%water_surface(m) = .TRUE. ENDDO ENDDO END SELECT ! !-- In case of netcdf input file, further initialize surface fractions. !-- At the moment only 1 surface is given at a location, so that the fraction !-- is either 0 or 1. This will be revised later. IF ( input_pids_static ) THEN DO m = 1, surf_lsm_h%ns i = surf_lsm_h%i(m) j = surf_lsm_h%j(m) ! !-- 0 - vegetation fraction, 1 - pavement fraction, 2 - water fraction surf_lsm_h%frac(ind_veg,m) = surface_fraction_f%frac(ind_veg,j,i) surf_lsm_h%frac(ind_pav,m) = surface_fraction_f%frac(ind_pav,j,i) surf_lsm_h%frac(ind_wat,m) = surface_fraction_f%frac(ind_wat,j,i) ENDDO DO l = 0, 3 DO m = 1, surf_lsm_v(l)%ns i = surf_lsm_v(l)%i(m) + MERGE( 0, surf_lsm_v(l)%ioff, & surf_lsm_v(l)%building_covered(m) ) j = surf_lsm_v(l)%j(m) + MERGE( 0, surf_lsm_v(l)%joff, & surf_lsm_v(l)%building_covered(m) ) ! !-- 0 - vegetation fraction, 1 - pavement fraction, 2 - water fraction surf_lsm_v(l)%frac(ind_veg,m) = surface_fraction_f%frac(ind_veg,j,i) surf_lsm_v(l)%frac(ind_pav,m) = surface_fraction_f%frac(ind_pav,j,i) surf_lsm_v(l)%frac(ind_wat,m) = surface_fraction_f%frac(ind_wat,j,i) ENDDO ENDDO ENDIF ! !-- Level 1, initialization of soil parameters. !-- It is possible to overwrite each parameter by setting the respecticy !-- NAMELIST variable to a value /= 9999999.9. IF ( soil_type /= 0 ) THEN IF ( alpha_vangenuchten == 9999999.9_wp ) THEN alpha_vangenuchten = soil_pars(0,soil_type) ENDIF IF ( l_vangenuchten == 9999999.9_wp ) THEN l_vangenuchten = soil_pars(1,soil_type) ENDIF IF ( n_vangenuchten == 9999999.9_wp ) THEN n_vangenuchten = soil_pars(2,soil_type) ENDIF IF ( hydraulic_conductivity == 9999999.9_wp ) THEN hydraulic_conductivity = soil_pars(3,soil_type) ENDIF IF ( saturation_moisture == 9999999.9_wp ) THEN saturation_moisture = soil_pars(4,soil_type) ENDIF IF ( field_capacity == 9999999.9_wp ) THEN field_capacity = soil_pars(5,soil_type) ENDIF IF ( wilting_point == 9999999.9_wp ) THEN wilting_point = soil_pars(6,soil_type) ENDIF IF ( residual_moisture == 9999999.9_wp ) THEN residual_moisture = soil_pars(7,soil_type) ENDIF ENDIF ! !-- Map values to the respective 2D/3D arrays !-- Horizontal surfaces surf_lsm_h%alpha_vg = alpha_vangenuchten surf_lsm_h%l_vg = l_vangenuchten surf_lsm_h%n_vg = n_vangenuchten surf_lsm_h%gamma_w_sat = hydraulic_conductivity surf_lsm_h%m_sat = saturation_moisture surf_lsm_h%m_fc = field_capacity surf_lsm_h%m_wilt = wilting_point surf_lsm_h%m_res = residual_moisture surf_lsm_h%r_soil_min = min_soil_resistance ! !-- Vertical surfaces DO l = 0, 3 surf_lsm_v(l)%alpha_vg = alpha_vangenuchten surf_lsm_v(l)%l_vg = l_vangenuchten surf_lsm_v(l)%n_vg = n_vangenuchten surf_lsm_v(l)%gamma_w_sat = hydraulic_conductivity surf_lsm_v(l)%m_sat = saturation_moisture surf_lsm_v(l)%m_fc = field_capacity surf_lsm_v(l)%m_wilt = wilting_point surf_lsm_v(l)%m_res = residual_moisture surf_lsm_v(l)%r_soil_min = min_soil_resistance ENDDO ! !-- Level 2, initialization of soil parameters via soil_type read from file. !-- Soil parameters are initialized for each (y,x)-grid point !-- individually using default paramter settings according to the given !-- soil type. IF ( soil_type_f%from_file ) THEN ! !-- Level of detail = 1, i.e. a homogeneous soil distribution along the !-- vertical dimension is assumed. IF ( soil_type_f%lod == 1 ) THEN ! !-- Horizontal surfaces DO m = 1, surf_lsm_h%ns i = surf_lsm_h%i(m) j = surf_lsm_h%j(m) st = soil_type_f%var_2d(j,i) IF ( st /= soil_type_f%fill ) THEN surf_lsm_h%alpha_vg(:,m) = soil_pars(0,st) surf_lsm_h%l_vg(:,m) = soil_pars(1,st) surf_lsm_h%n_vg(:,m) = soil_pars(2,st) surf_lsm_h%gamma_w_sat(:,m) = soil_pars(3,st) surf_lsm_h%m_sat(:,m) = soil_pars(4,st) surf_lsm_h%m_fc(:,m) = soil_pars(5,st) surf_lsm_h%m_wilt(:,m) = soil_pars(6,st) surf_lsm_h%m_res(:,m) = soil_pars(7,st) ENDIF ENDDO ! !-- Vertical surfaces ( assumes the soil type given at respective (x,y) DO l = 0, 3 DO m = 1, surf_lsm_v(l)%ns i = surf_lsm_v(l)%i(m) + MERGE( 0, surf_lsm_v(l)%ioff, & surf_lsm_v(l)%building_covered(m) ) j = surf_lsm_v(l)%j(m) + MERGE( 0, surf_lsm_v(l)%joff, & surf_lsm_v(l)%building_covered(m) ) st = soil_type_f%var_2d(j,i) IF ( st /= soil_type_f%fill ) THEN surf_lsm_v(l)%alpha_vg(:,m) = soil_pars(0,st) surf_lsm_v(l)%l_vg(:,m) = soil_pars(1,st) surf_lsm_v(l)%n_vg(:,m) = soil_pars(2,st) surf_lsm_v(l)%gamma_w_sat(:,m) = soil_pars(3,st) surf_lsm_v(l)%m_sat(:,m) = soil_pars(4,st) surf_lsm_v(l)%m_fc(:,m) = soil_pars(5,st) surf_lsm_v(l)%m_wilt(:,m) = soil_pars(6,st) surf_lsm_v(l)%m_res(:,m) = soil_pars(7,st) ENDIF ENDDO ENDDO ! !-- Level of detail = 2, i.e. soil type and thus the soil parameters !-- can be heterogeneous along the vertical dimension. ELSE ! !-- Horizontal surfaces DO m = 1, surf_lsm_h%ns i = surf_lsm_h%i(m) j = surf_lsm_h%j(m) DO k = nzb_soil, nzt_soil st = soil_type_f%var_3d(k,j,i) IF ( st /= soil_type_f%fill ) THEN surf_lsm_h%alpha_vg(k,m) = soil_pars(0,st) surf_lsm_h%l_vg(k,m) = soil_pars(1,st) surf_lsm_h%n_vg(k,m) = soil_pars(2,st) surf_lsm_h%gamma_w_sat(k,m) = soil_pars(3,st) surf_lsm_h%m_sat(k,m) = soil_pars(4,st) surf_lsm_h%m_fc(k,m) = soil_pars(5,st) surf_lsm_h%m_wilt(k,m) = soil_pars(6,st) surf_lsm_h%m_res(k,m) = soil_pars(7,st) ENDIF ENDDO ENDDO ! !-- Vertical surfaces ( assumes the soil type given at respective (x,y) DO l = 0, 3 DO m = 1, surf_lsm_v(l)%ns i = surf_lsm_v(l)%i(m) + MERGE( 0, surf_lsm_v(l)%ioff, & surf_lsm_v(l)%building_covered(m) ) j = surf_lsm_v(l)%j(m) + MERGE( 0, surf_lsm_v(l)%joff, & surf_lsm_v(l)%building_covered(m) ) DO k = nzb_soil, nzt_soil st = soil_type_f%var_3d(k,j,i) IF ( st /= soil_type_f%fill ) THEN surf_lsm_v(l)%alpha_vg(k,m) = soil_pars(0,st) surf_lsm_v(l)%l_vg(k,m) = soil_pars(1,st) surf_lsm_v(l)%n_vg(k,m) = soil_pars(2,st) surf_lsm_v(l)%gamma_w_sat(k,m) = soil_pars(3,st) surf_lsm_v(l)%m_sat(k,m) = soil_pars(4,st) surf_lsm_v(l)%m_fc(k,m) = soil_pars(5,st) surf_lsm_v(l)%m_wilt(k,m) = soil_pars(6,st) surf_lsm_v(l)%m_res(k,m) = soil_pars(7,st) ENDIF ENDDO ENDDO ENDDO ENDIF ENDIF ! !-- Level 3, initialization of single soil parameters at single z,x,y !-- position via soil_pars read from file. IF ( soil_pars_f%from_file ) THEN ! !-- Level of detail = 1, i.e. a homogeneous vertical distribution of soil !-- parameters is assumed. !-- Horizontal surfaces IF ( soil_pars_f%lod == 1 ) THEN ! !-- Horizontal surfaces DO m = 1, surf_lsm_h%ns i = surf_lsm_h%i(m) j = surf_lsm_h%j(m) IF ( soil_pars_f%pars_xy(0,j,i) /= soil_pars_f%fill ) & surf_lsm_h%alpha_vg(:,m) = soil_pars_f%pars_xy(0,j,i) IF ( soil_pars_f%pars_xy(1,j,i) /= soil_pars_f%fill ) & surf_lsm_h%l_vg(:,m) = soil_pars_f%pars_xy(1,j,i) IF ( soil_pars_f%pars_xy(2,j,i) /= soil_pars_f%fill ) & surf_lsm_h%n_vg(:,m) = soil_pars_f%pars_xy(2,j,i) IF ( soil_pars_f%pars_xy(3,j,i) /= soil_pars_f%fill ) & surf_lsm_h%gamma_w_sat(:,m) = soil_pars_f%pars_xy(3,j,i) IF ( soil_pars_f%pars_xy(4,j,i) /= soil_pars_f%fill ) & surf_lsm_h%m_sat(:,m) = soil_pars_f%pars_xy(4,j,i) IF ( soil_pars_f%pars_xy(5,j,i) /= soil_pars_f%fill ) & surf_lsm_h%m_fc(:,m) = soil_pars_f%pars_xy(5,j,i) IF ( soil_pars_f%pars_xy(6,j,i) /= soil_pars_f%fill ) & surf_lsm_h%m_wilt(:,m) = soil_pars_f%pars_xy(6,j,i) IF ( soil_pars_f%pars_xy(7,j,i) /= soil_pars_f%fill ) & surf_lsm_h%m_res(:,m) = soil_pars_f%pars_xy(7,j,i) ENDDO ! !-- Vertical surfaces DO l = 0, 3 DO m = 1, surf_lsm_v(l)%ns i = surf_lsm_v(l)%i(m) + MERGE( 0, surf_lsm_v(l)%ioff, & surf_lsm_v(l)%building_covered(m) ) j = surf_lsm_v(l)%j(m) + MERGE( 0, surf_lsm_v(l)%joff, & surf_lsm_v(l)%building_covered(m) ) IF ( soil_pars_f%pars_xy(0,j,i) /= soil_pars_f%fill ) & surf_lsm_v(l)%alpha_vg(:,m) = soil_pars_f%pars_xy(0,j,i) IF ( soil_pars_f%pars_xy(1,j,i) /= soil_pars_f%fill ) & surf_lsm_v(l)%l_vg(:,m) = soil_pars_f%pars_xy(1,j,i) IF ( soil_pars_f%pars_xy(2,j,i) /= soil_pars_f%fill ) & surf_lsm_v(l)%n_vg(:,m) = soil_pars_f%pars_xy(2,j,i) IF ( soil_pars_f%pars_xy(3,j,i) /= soil_pars_f%fill ) & surf_lsm_v(l)%gamma_w_sat(:,m) = soil_pars_f%pars_xy(3,j,i) IF ( soil_pars_f%pars_xy(4,j,i) /= soil_pars_f%fill ) & surf_lsm_v(l)%m_sat(:,m) = soil_pars_f%pars_xy(4,j,i) IF ( soil_pars_f%pars_xy(5,j,i) /= soil_pars_f%fill ) & surf_lsm_v(l)%m_fc(:,m) = soil_pars_f%pars_xy(5,j,i) IF ( soil_pars_f%pars_xy(6,j,i) /= soil_pars_f%fill ) & surf_lsm_v(l)%m_wilt(:,m) = soil_pars_f%pars_xy(6,j,i) IF ( soil_pars_f%pars_xy(7,j,i) /= soil_pars_f%fill ) & surf_lsm_v(l)%m_res(:,m) = soil_pars_f%pars_xy(7,j,i) ENDDO ENDDO ! !-- Level of detail = 2, i.e. soil parameters can be set at each soil !-- layer individually. ELSE ! !-- Horizontal surfaces DO m = 1, surf_lsm_h%ns i = surf_lsm_h%i(m) j = surf_lsm_h%j(m) DO k = nzb_soil, nzt_soil IF ( soil_pars_f%pars_xyz(0,k,j,i) /= soil_pars_f%fill ) & surf_lsm_h%alpha_vg(k,m) = soil_pars_f%pars_xyz(0,k,j,i) IF ( soil_pars_f%pars_xyz(1,k,j,i) /= soil_pars_f%fill ) & surf_lsm_h%l_vg(k,m) = soil_pars_f%pars_xyz(1,k,j,i) IF ( soil_pars_f%pars_xyz(2,k,j,i) /= soil_pars_f%fill ) & surf_lsm_h%n_vg(k,m) = soil_pars_f%pars_xyz(2,k,j,i) IF ( soil_pars_f%pars_xyz(3,k,j,i) /= soil_pars_f%fill ) & surf_lsm_h%gamma_w_sat(k,m) = soil_pars_f%pars_xyz(3,k,j,i) IF ( soil_pars_f%pars_xyz(4,k,j,i) /= soil_pars_f%fill ) & surf_lsm_h%m_sat(k,m) = soil_pars_f%pars_xyz(4,k,j,i) IF ( soil_pars_f%pars_xyz(5,k,j,i) /= soil_pars_f%fill ) & surf_lsm_h%m_fc(k,m) = soil_pars_f%pars_xyz(5,k,j,i) IF ( soil_pars_f%pars_xyz(6,k,j,i) /= soil_pars_f%fill ) & surf_lsm_h%m_wilt(k,m) = soil_pars_f%pars_xyz(6,k,j,i) IF ( soil_pars_f%pars_xyz(7,k,j,i) /= soil_pars_f%fill ) & surf_lsm_h%m_res(k,m) = soil_pars_f%pars_xyz(7,k,j,i) ENDDO ENDDO ! !-- Vertical surfaces DO l = 0, 3 DO m = 1, surf_lsm_v(l)%ns i = surf_lsm_v(l)%i(m) + MERGE( 0, surf_lsm_v(l)%ioff, & surf_lsm_v(l)%building_covered(m) ) j = surf_lsm_v(l)%j(m) + MERGE( 0, surf_lsm_v(l)%joff, & surf_lsm_v(l)%building_covered(m) ) DO k = nzb_soil, nzt_soil IF ( soil_pars_f%pars_xyz(0,k,j,i) /= soil_pars_f%fill ) & surf_lsm_v(l)%alpha_vg(k,m) = soil_pars_f%pars_xyz(0,k,j,i) IF ( soil_pars_f%pars_xyz(1,k,j,i) /= soil_pars_f%fill ) & surf_lsm_v(l)%l_vg(k,m) = soil_pars_f%pars_xyz(1,k,j,i) IF ( soil_pars_f%pars_xyz(2,k,j,i) /= soil_pars_f%fill ) & surf_lsm_v(l)%n_vg(k,m) = soil_pars_f%pars_xyz(2,k,j,i) IF ( soil_pars_f%pars_xyz(3,k,j,i) /= soil_pars_f%fill ) & surf_lsm_v(l)%gamma_w_sat(k,m) = soil_pars_f%pars_xyz(3,k,j,i) IF ( soil_pars_f%pars_xyz(4,k,j,i) /= soil_pars_f%fill ) & surf_lsm_v(l)%m_sat(k,m) = soil_pars_f%pars_xyz(4,k,j,i) IF ( soil_pars_f%pars_xyz(5,k,j,i) /= soil_pars_f%fill ) & surf_lsm_v(l)%m_fc(k,m) = soil_pars_f%pars_xyz(5,k,j,i) IF ( soil_pars_f%pars_xyz(6,k,j,i) /= soil_pars_f%fill ) & surf_lsm_v(l)%m_wilt(k,m) = soil_pars_f%pars_xyz(6,k,j,i) IF ( soil_pars_f%pars_xyz(7,k,j,i) /= soil_pars_f%fill ) & surf_lsm_v(l)%m_res(k,m) = soil_pars_f%pars_xyz(7,k,j,i) ENDDO ENDDO ENDDO ENDIF ENDIF ! !-- Level 1, initialization of vegetation parameters. A horizontally !-- homogeneous distribution is assumed here. IF ( vegetation_type /= 0 ) THEN IF ( min_canopy_resistance == 9999999.9_wp ) THEN min_canopy_resistance = vegetation_pars(ind_v_rc_min,vegetation_type) ENDIF IF ( leaf_area_index == 9999999.9_wp ) THEN leaf_area_index = vegetation_pars(ind_v_rc_lai,vegetation_type) ENDIF IF ( vegetation_coverage == 9999999.9_wp ) THEN vegetation_coverage = vegetation_pars(ind_v_c_veg,vegetation_type) ENDIF IF ( canopy_resistance_coefficient == 9999999.9_wp ) THEN canopy_resistance_coefficient= vegetation_pars(ind_v_gd,vegetation_type) ENDIF IF ( z0_vegetation == 9999999.9_wp ) THEN z0_vegetation = vegetation_pars(ind_v_z0,vegetation_type) ENDIF IF ( z0h_vegetation == 9999999.9_wp ) THEN z0h_vegetation = vegetation_pars(ind_v_z0qh,vegetation_type) ENDIF IF ( lambda_surface_stable == 9999999.9_wp ) THEN lambda_surface_stable = vegetation_pars(ind_v_lambda_s,vegetation_type) ENDIF IF ( lambda_surface_unstable == 9999999.9_wp ) THEN lambda_surface_unstable = vegetation_pars(ind_v_lambda_u,vegetation_type) ENDIF IF ( f_shortwave_incoming == 9999999.9_wp ) THEN f_shortwave_incoming = vegetation_pars(ind_v_f_sw_in,vegetation_type) ENDIF IF ( c_surface == 9999999.9_wp ) THEN c_surface = vegetation_pars(ind_v_c_surf,vegetation_type) ENDIF IF ( albedo_type == 9999999 .AND. albedo == 9999999.9_wp ) THEN albedo_type = INT(vegetation_pars(ind_v_at,vegetation_type)) ENDIF IF ( emissivity == 9999999.9_wp ) THEN emissivity = vegetation_pars(ind_v_emis,vegetation_type) ENDIF ENDIF ! !-- Map values onto horizontal elemements DO m = 1, surf_lsm_h%ns IF ( surf_lsm_h%vegetation_surface(m) ) THEN surf_lsm_h%r_canopy_min(m) = min_canopy_resistance surf_lsm_h%lai(m) = leaf_area_index surf_lsm_h%c_veg(m) = vegetation_coverage surf_lsm_h%g_d(m) = canopy_resistance_coefficient surf_lsm_h%z0(m) = z0_vegetation surf_lsm_h%z0h(m) = z0h_vegetation surf_lsm_h%z0q(m) = z0h_vegetation surf_lsm_h%lambda_surface_s(m) = lambda_surface_stable surf_lsm_h%lambda_surface_u(m) = lambda_surface_unstable surf_lsm_h%f_sw_in(m) = f_shortwave_incoming surf_lsm_h%c_surface(m) = c_surface surf_lsm_h%albedo_type(ind_veg,m) = albedo_type surf_lsm_h%emissivity(ind_veg,m) = emissivity ELSE surf_lsm_h%lai(m) = 0.0_wp surf_lsm_h%c_veg(m) = 0.0_wp surf_lsm_h%g_d(m) = 0.0_wp ENDIF ENDDO ! !-- Map values onto vertical elements, even though this does not make !-- much sense. DO l = 0, 3 DO m = 1, surf_lsm_v(l)%ns IF ( surf_lsm_v(l)%vegetation_surface(m) ) THEN surf_lsm_v(l)%r_canopy_min(m) = min_canopy_resistance surf_lsm_v(l)%lai(m) = leaf_area_index surf_lsm_v(l)%c_veg(m) = vegetation_coverage surf_lsm_v(l)%g_d(m) = canopy_resistance_coefficient surf_lsm_v(l)%z0(m) = z0_vegetation surf_lsm_v(l)%z0h(m) = z0h_vegetation surf_lsm_v(l)%z0q(m) = z0h_vegetation surf_lsm_v(l)%lambda_surface_s(m) = lambda_surface_stable surf_lsm_v(l)%lambda_surface_u(m) = lambda_surface_unstable surf_lsm_v(l)%f_sw_in(m) = f_shortwave_incoming surf_lsm_v(l)%c_surface(m) = c_surface surf_lsm_v(l)%albedo_type(ind_veg,m) = albedo_type surf_lsm_v(l)%emissivity(ind_veg,m) = emissivity ELSE surf_lsm_v(l)%lai(m) = 0.0_wp surf_lsm_v(l)%c_veg(m) = 0.0_wp surf_lsm_v(l)%g_d(m) = 0.0_wp ENDIF ENDDO ENDDO ! !-- Level 2, initialization of vegation parameters via vegetation_type read !-- from file. Vegetation parameters are initialized for each (y,x)-grid point !-- individually using default paramter settings according to the given !-- vegetation type. IF ( vegetation_type_f%from_file ) THEN ! !-- Horizontal surfaces DO m = 1, surf_lsm_h%ns i = surf_lsm_h%i(m) j = surf_lsm_h%j(m) st = vegetation_type_f%var(j,i) IF ( st /= vegetation_type_f%fill .AND. st /= 0 ) THEN surf_lsm_h%r_canopy_min(m) = vegetation_pars(ind_v_rc_min,st) surf_lsm_h%lai(m) = vegetation_pars(ind_v_rc_lai,st) surf_lsm_h%c_veg(m) = vegetation_pars(ind_v_c_veg,st) surf_lsm_h%g_d(m) = vegetation_pars(ind_v_gd,st) surf_lsm_h%z0(m) = vegetation_pars(ind_v_z0,st) surf_lsm_h%z0h(m) = vegetation_pars(ind_v_z0qh,st) surf_lsm_h%z0q(m) = vegetation_pars(ind_v_z0qh,st) surf_lsm_h%lambda_surface_s(m) = vegetation_pars(ind_v_lambda_s,st) surf_lsm_h%lambda_surface_u(m) = vegetation_pars(ind_v_lambda_u,st) surf_lsm_h%f_sw_in(m) = vegetation_pars(ind_v_f_sw_in,st) surf_lsm_h%c_surface(m) = vegetation_pars(ind_v_c_surf,st) surf_lsm_h%albedo_type(ind_veg,m) = INT( vegetation_pars(ind_v_at,st) ) surf_lsm_h%emissivity(ind_veg,m) = vegetation_pars(ind_v_emis,st) ENDIF ENDDO ! !-- Vertical surfaces DO l = 0, 3 DO m = 1, surf_lsm_v(l)%ns i = surf_lsm_v(l)%i(m) + MERGE( 0, surf_lsm_v(l)%ioff, & surf_lsm_v(l)%building_covered(m) ) j = surf_lsm_v(l)%j(m) + MERGE( 0, surf_lsm_v(l)%joff, & surf_lsm_v(l)%building_covered(m) ) st = vegetation_type_f%var(j,i) IF ( st /= vegetation_type_f%fill .AND. st /= 0 ) THEN surf_lsm_v(l)%r_canopy_min(m) = vegetation_pars(ind_v_rc_min,st) surf_lsm_v(l)%lai(m) = vegetation_pars(ind_v_rc_lai,st) surf_lsm_v(l)%c_veg(m) = vegetation_pars(ind_v_c_veg,st) surf_lsm_v(l)%g_d(m) = vegetation_pars(ind_v_gd,st) surf_lsm_v(l)%z0(m) = vegetation_pars(ind_v_z0,st) surf_lsm_v(l)%z0h(m) = vegetation_pars(ind_v_z0qh,st) surf_lsm_v(l)%z0q(m) = vegetation_pars(ind_v_z0qh,st) surf_lsm_v(l)%lambda_surface_s(m) = vegetation_pars(ind_v_lambda_s,st) surf_lsm_v(l)%lambda_surface_u(m) = vegetation_pars(ind_v_lambda_u,st) surf_lsm_v(l)%f_sw_in(m) = vegetation_pars(ind_v_f_sw_in,st) surf_lsm_v(l)%c_surface(m) = vegetation_pars(ind_v_c_surf,st) surf_lsm_v(l)%albedo_type(ind_veg,m) = INT( vegetation_pars(ind_v_at,st) ) surf_lsm_v(l)%emissivity(ind_veg,m) = vegetation_pars(ind_v_emis,st) ENDIF ENDDO ENDDO ENDIF ! !-- Level 3, initialization of vegation parameters at single (x,y) !-- position via vegetation_pars read from file. IF ( vegetation_pars_f%from_file ) THEN ! !-- Horizontal surfaces DO m = 1, surf_lsm_h%ns i = surf_lsm_h%i(m) j = surf_lsm_h%j(m) ! !-- If surface element is not a vegetation surface and any value in !-- vegetation_pars is given, neglect this information and give an !-- informative message that this value will not be used. IF ( .NOT. surf_lsm_h%vegetation_surface(m) .AND. & ANY( vegetation_pars_f%pars_xy(:,j,i) /= & vegetation_pars_f%fill ) ) THEN WRITE( message_string, * ) & 'surface element at grid point (j,i) = (', & j, i, ') is not a vegation surface, ', & 'so that information given in ', & 'vegetation_pars at this point is neglected.' CALL message( 'land_surface_model_mod', 'PA0999', 0, 0, 0, 6, 0 ) ELSE IF ( vegetation_pars_f%pars_xy(ind_v_rc_min,j,i) /= & vegetation_pars_f%fill ) & surf_lsm_h%r_canopy_min(m) = & vegetation_pars_f%pars_xy(ind_v_rc_min,j,i) IF ( vegetation_pars_f%pars_xy(ind_v_rc_lai,j,i) /= & vegetation_pars_f%fill ) & surf_lsm_h%lai(m) = & vegetation_pars_f%pars_xy(ind_v_rc_lai,j,i) IF ( vegetation_pars_f%pars_xy(ind_v_c_veg,j,i) /= & vegetation_pars_f%fill ) & surf_lsm_h%c_veg(m) = & vegetation_pars_f%pars_xy(ind_v_c_veg,j,i) IF ( vegetation_pars_f%pars_xy(ind_v_gd,j,i) /= & vegetation_pars_f%fill ) & surf_lsm_h%g_d(m) = & vegetation_pars_f%pars_xy(ind_v_gd,j,i) IF ( vegetation_pars_f%pars_xy(ind_v_z0,j,i) /= & vegetation_pars_f%fill ) & surf_lsm_h%z0(m) = & vegetation_pars_f%pars_xy(ind_v_z0,j,i) IF ( vegetation_pars_f%pars_xy(ind_v_z0qh,j,i) /= & vegetation_pars_f%fill ) THEN surf_lsm_h%z0h(m) = & vegetation_pars_f%pars_xy(ind_v_z0qh,j,i) surf_lsm_h%z0q(m) = & vegetation_pars_f%pars_xy(ind_v_z0qh,j,i) ENDIF IF ( vegetation_pars_f%pars_xy(ind_v_lambda_s,j,i) /= & vegetation_pars_f%fill ) & surf_lsm_h%lambda_surface_s(m) = & vegetation_pars_f%pars_xy(ind_v_lambda_s,j,i) IF ( vegetation_pars_f%pars_xy(ind_v_lambda_u,j,i) /= & vegetation_pars_f%fill ) & surf_lsm_h%lambda_surface_u(m) = & vegetation_pars_f%pars_xy(ind_v_lambda_u,j,i) IF ( vegetation_pars_f%pars_xy(ind_v_f_sw_in,j,i) /= & vegetation_pars_f%fill ) & surf_lsm_h%f_sw_in(m) = & vegetation_pars_f%pars_xy(ind_v_f_sw_in,j,i) IF ( vegetation_pars_f%pars_xy(ind_v_c_surf,j,i) /= & vegetation_pars_f%fill ) & surf_lsm_h%c_surface(m) = & vegetation_pars_f%pars_xy(ind_v_c_surf,j,i) IF ( vegetation_pars_f%pars_xy(ind_v_at,j,i) /= & vegetation_pars_f%fill ) & surf_lsm_h%albedo_type(ind_veg,m) = & INT( vegetation_pars_f%pars_xy(ind_v_at,j,i) ) IF ( vegetation_pars_f%pars_xy(ind_v_emis,j,i) /= & vegetation_pars_f%fill ) & surf_lsm_h%emissivity(ind_veg,m) = & vegetation_pars_f%pars_xy(ind_v_emis,j,i) ENDIF ENDDO ! !-- Vertical surfaces DO l = 0, 3 DO m = 1, surf_lsm_v(l)%ns i = surf_lsm_v(l)%i(m) + MERGE( 0, surf_lsm_v(l)%ioff, & surf_lsm_v(l)%building_covered(m) ) j = surf_lsm_v(l)%j(m) + MERGE( 0, surf_lsm_v(l)%joff, & surf_lsm_v(l)%building_covered(m) ) ! !-- If surface element is not a vegetation surface and any value in !-- vegetation_pars is given, neglect this information and give an !-- informative message that this value will not be used. IF ( .NOT. surf_lsm_v(l)%vegetation_surface(m) .AND. & ANY( vegetation_pars_f%pars_xy(:,j,i) /= & vegetation_pars_f%fill ) ) THEN WRITE( message_string, * ) & 'surface element at grid point (j,i) = (', & j, i, ') is not a vegation surface, ', & 'so that information given in ', & 'vegetation_pars at this point is neglected.' CALL message( 'land_surface_model_mod', 'PA0999', 0, 0, 0, 6, 0 ) ELSE IF ( vegetation_pars_f%pars_xy(ind_v_rc_min,j,i) /= & vegetation_pars_f%fill ) & surf_lsm_v(l)%r_canopy_min(m) = & vegetation_pars_f%pars_xy(ind_v_rc_min,j,i) IF ( vegetation_pars_f%pars_xy(ind_v_rc_lai,j,i) /= & vegetation_pars_f%fill ) & surf_lsm_v(l)%lai(m) = & vegetation_pars_f%pars_xy(ind_v_rc_lai,j,i) IF ( vegetation_pars_f%pars_xy(ind_v_c_veg,j,i) /= & vegetation_pars_f%fill ) & surf_lsm_v(l)%c_veg(m) = & vegetation_pars_f%pars_xy(ind_v_c_veg,j,i) IF ( vegetation_pars_f%pars_xy(ind_v_gd,j,i) /= & vegetation_pars_f%fill ) & surf_lsm_v(l)%g_d(m) = & vegetation_pars_f%pars_xy(ind_v_gd,j,i) IF ( vegetation_pars_f%pars_xy(ind_v_z0,j,i) /= & vegetation_pars_f%fill ) & surf_lsm_v(l)%z0(m) = & vegetation_pars_f%pars_xy(ind_v_z0,j,i) IF ( vegetation_pars_f%pars_xy(ind_v_z0qh,j,i) /= & vegetation_pars_f%fill ) THEN surf_lsm_v(l)%z0h(m) = & vegetation_pars_f%pars_xy(ind_v_z0qh,j,i) surf_lsm_v(l)%z0q(m) = & vegetation_pars_f%pars_xy(ind_v_z0qh,j,i) ENDIF IF ( vegetation_pars_f%pars_xy(ind_v_lambda_s,j,i) /= & vegetation_pars_f%fill ) & surf_lsm_v(l)%lambda_surface_s(m) = & vegetation_pars_f%pars_xy(ind_v_lambda_s,j,i) IF ( vegetation_pars_f%pars_xy(ind_v_lambda_u,j,i) /= & vegetation_pars_f%fill ) & surf_lsm_v(l)%lambda_surface_u(m) = & vegetation_pars_f%pars_xy(ind_v_lambda_u,j,i) IF ( vegetation_pars_f%pars_xy(ind_v_f_sw_in,j,i) /= & vegetation_pars_f%fill ) & surf_lsm_v(l)%f_sw_in(m) = & vegetation_pars_f%pars_xy(ind_v_f_sw_in,j,i) IF ( vegetation_pars_f%pars_xy(ind_v_c_surf,j,i) /= & vegetation_pars_f%fill ) & surf_lsm_v(l)%c_surface(m) = & vegetation_pars_f%pars_xy(ind_v_c_surf,j,i) IF ( vegetation_pars_f%pars_xy(ind_v_at,j,i) /= & vegetation_pars_f%fill ) & surf_lsm_v(l)%albedo_type(ind_veg,m) = & INT( vegetation_pars_f%pars_xy(ind_v_at,j,i) ) IF ( vegetation_pars_f%pars_xy(ind_v_emis,j,i) /= & vegetation_pars_f%fill ) & surf_lsm_v(l)%emissivity(ind_veg,m) = & vegetation_pars_f%pars_xy(ind_v_emis,j,i) ENDIF ENDDO ENDDO ENDIF ! !-- Level 1, initialization of water parameters. A horizontally !-- homogeneous distribution is assumed here. IF ( water_type /= 0 ) THEN IF ( water_temperature == 9999999.9_wp ) THEN water_temperature = water_pars(ind_w_temp,water_type) ENDIF IF ( z0_water == 9999999.9_wp ) THEN z0_water = water_pars(ind_w_z0,water_type) ENDIF IF ( z0h_water == 9999999.9_wp ) THEN z0h_water = water_pars(ind_w_z0h,water_type) ENDIF IF ( albedo_type == 9999999 .AND. albedo == 9999999.9_wp ) THEN albedo_type = INT(water_pars(ind_w_at,water_type)) ENDIF IF ( emissivity == 9999999.9_wp ) THEN emissivity = water_pars(ind_w_emis,water_type) ENDIF ENDIF ! !-- Map values onto horizontal elemements DO m = 1, surf_lsm_h%ns IF ( surf_lsm_h%water_surface(m) ) THEN IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) & t_soil_h%var_2d(:,m) = water_temperature surf_lsm_h%z0(m) = z0_water surf_lsm_h%z0h(m) = z0h_water surf_lsm_h%z0q(m) = z0h_water surf_lsm_h%lambda_surface_s(m) = 1.0E10_wp surf_lsm_h%lambda_surface_u(m) = 1.0E10_wp surf_lsm_h%c_surface(m) = 0.0_wp surf_lsm_h%albedo_type(ind_wat,m) = albedo_type surf_lsm_h%emissivity(ind_wat,m) = emissivity ENDIF ENDDO ! !-- Map values onto vertical elements, even though this does not make !-- much sense. DO l = 0, 3 DO m = 1, surf_lsm_v(l)%ns IF ( surf_lsm_v(l)%water_surface(m) ) THEN IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) & t_soil_v(l)%var_2d(:,m) = water_temperature surf_lsm_v(l)%z0(m) = z0_water surf_lsm_v(l)%z0h(m) = z0h_water surf_lsm_v(l)%z0q(m) = z0h_water surf_lsm_v(l)%lambda_surface_s(m) = 1.0E10_wp surf_lsm_v(l)%lambda_surface_u(m) = 1.0E10_wp surf_lsm_v(l)%c_surface(m) = 0.0_wp surf_lsm_v(l)%albedo_type(ind_wat,m) = albedo_type surf_lsm_v(l)%emissivity(ind_wat,m) = emissivity ENDIF ENDDO ENDDO ! ! !-- Level 2, initialization of water parameters via water_type read !-- from file. Water surfaces are initialized for each (y,x)-grid point !-- individually using default paramter settings according to the given !-- water type. !-- Note, parameter 3/4 of water_pars are albedo and emissivity, !-- whereas paramter 3/4 of water_pars_f are heat conductivities! IF ( water_type_f%from_file ) THEN ! !-- Horizontal surfaces DO m = 1, surf_lsm_h%ns i = surf_lsm_h%i(m) j = surf_lsm_h%j(m) st = water_type_f%var(j,i) IF ( st /= water_type_f%fill .AND. st /= 0 ) THEN IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) & t_soil_h%var_2d(:,m) = water_pars(ind_w_temp,st) surf_lsm_h%z0(m) = water_pars(ind_w_z0,st) surf_lsm_h%z0h(m) = water_pars(ind_w_z0h,st) surf_lsm_h%z0q(m) = water_pars(ind_w_z0h,st) surf_lsm_h%lambda_surface_s(m) = water_pars(ind_w_lambda_s,st) surf_lsm_h%lambda_surface_u(m) = water_pars(ind_w_lambda_u,st) surf_lsm_h%c_surface(m) = 0.0_wp surf_lsm_h%albedo_type(ind_wat,m) = INT( water_pars(ind_w_at,st) ) surf_lsm_h%emissivity(ind_wat,m) = water_pars(ind_w_emis,st) ENDIF ENDDO ! !-- Vertical surfaces DO l = 0, 3 DO m = 1, surf_lsm_v(l)%ns i = surf_lsm_v(l)%i(m) + MERGE( 0, surf_lsm_v(l)%ioff, & surf_lsm_v(l)%building_covered(m) ) j = surf_lsm_v(l)%j(m) + MERGE( 0, surf_lsm_v(l)%joff, & surf_lsm_v(l)%building_covered(m) ) st = water_type_f%var(j,i) IF ( st /= water_type_f%fill .AND. st /= 0 ) THEN IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) & t_soil_v(l)%var_2d(:,m) = water_pars(ind_w_temp,st) surf_lsm_v(l)%z0(m) = water_pars(ind_w_z0,st) surf_lsm_v(l)%z0h(m) = water_pars(ind_w_z0h,st) surf_lsm_v(l)%z0q(m) = water_pars(ind_w_z0h,st) surf_lsm_v(l)%lambda_surface_s(m) = & water_pars(ind_w_lambda_s,st) surf_lsm_v(l)%lambda_surface_u(m) = & water_pars(ind_w_lambda_u,st) surf_lsm_v(l)%c_surface(m) = 0.0_wp surf_lsm_v(l)%albedo_type(ind_wat,m) = & INT( water_pars(ind_w_at,st) ) surf_lsm_v(l)%emissivity(ind_wat,m) = & water_pars(ind_w_emis,st) ENDIF ENDDO ENDDO ENDIF ! !-- Level 3, initialization of water parameters at single (x,y) !-- position via water_pars read from file. IF ( water_pars_f%from_file ) THEN ! !-- Horizontal surfaces DO m = 1, surf_lsm_h%ns i = surf_lsm_h%i(m) j = surf_lsm_h%j(m) ! !-- If surface element is not a water surface and any value in !-- water_pars is given, neglect this information and give an !-- informative message that this value will not be used. IF ( .NOT. surf_lsm_h%water_surface(m) .AND. & ANY( water_pars_f%pars_xy(:,j,i) /= water_pars_f%fill ) ) THEN WRITE( message_string, * ) & 'surface element at grid point (j,i) = (', & j, i, ') is not a water surface, ', & 'so that information given in ', & 'water_pars at this point is neglected.' CALL message( 'land_surface_model_mod', 'PA0999', 0, 0, 0, 6, 0 ) ELSE IF ( water_pars_f%pars_xy(ind_w_temp,j,i) /= & water_pars_f%fill .AND. & TRIM( initializing_actions ) /= 'read_restart_data' ) & t_soil_h%var_2d(:,m) = water_pars_f%pars_xy(ind_w_temp,j,i) IF ( water_pars_f%pars_xy(ind_w_z0,j,i) /= water_pars_f%fill ) & surf_lsm_h%z0(m) = water_pars_f%pars_xy(ind_w_z0,j,i) IF ( water_pars_f%pars_xy(ind_w_z0h,j,i) /= water_pars_f%fill )& THEN surf_lsm_h%z0h(m) = water_pars_f%pars_xy(ind_w_z0h,j,i) surf_lsm_h%z0q(m) = water_pars_f%pars_xy(ind_w_z0h,j,i) ENDIF IF ( water_pars_f%pars_xy(ind_w_lambda_s,j,i) /= & water_pars_f%fill ) & surf_lsm_h%lambda_surface_s(m) = & water_pars_f%pars_xy(ind_w_lambda_s,j,i) IF ( water_pars_f%pars_xy(ind_w_lambda_u,j,i) /= & water_pars_f%fill ) & surf_lsm_h%lambda_surface_u(m) = & water_pars_f%pars_xy(ind_w_lambda_u,j,i) IF ( water_pars_f%pars_xy(ind_w_at,j,i) /= & water_pars_f%fill ) & surf_lsm_h%albedo_type(ind_wat,m) = & INT( water_pars_f%pars_xy(ind_w_at,j,i) ) IF ( water_pars_f%pars_xy(ind_w_emis,j,i) /= & water_pars_f%fill ) & surf_lsm_h%emissivity(ind_wat,m) = & water_pars_f%pars_xy(ind_w_emis,j,i) ENDIF ENDDO ! !-- Vertical surfaces DO l = 0, 3 DO m = 1, surf_lsm_v(l)%ns i = surf_lsm_v(l)%i(m) + MERGE( 0, surf_lsm_v(l)%ioff, & surf_lsm_v(l)%building_covered(m) ) j = surf_lsm_v(l)%j(m) + MERGE( 0, surf_lsm_v(l)%joff, & surf_lsm_v(l)%building_covered(m) ) ! !-- If surface element is not a water surface and any value in !-- water_pars is given, neglect this information and give an !-- informative message that this value will not be used. IF ( .NOT. surf_lsm_v(l)%water_surface(m) .AND. & ANY( water_pars_f%pars_xy(:,j,i) /= & water_pars_f%fill ) ) THEN WRITE( message_string, * ) & 'surface element at grid point (j,i) = (', & j, i, ') is not a water surface, ', & 'so that information given in ', & 'water_pars at this point is neglected.' CALL message( 'land_surface_model_mod', 'PA0999', & 0, 0, 0, 6, 0 ) ELSE IF ( water_pars_f%pars_xy(ind_w_temp,j,i) /= & water_pars_f%fill .AND. & TRIM( initializing_actions ) /= 'read_restart_data' ) & t_soil_v(l)%var_2d(:,m) = water_pars_f%pars_xy(ind_w_temp,j,i) IF ( water_pars_f%pars_xy(ind_w_z0,j,i) /= & water_pars_f%fill ) & surf_lsm_v(l)%z0(m) = water_pars_f%pars_xy(ind_w_z0,j,i) IF ( water_pars_f%pars_xy(ind_w_z0h,j,i) /= & water_pars_f%fill ) THEN surf_lsm_v(l)%z0h(m) = water_pars_f%pars_xy(ind_w_z0h,j,i) surf_lsm_v(l)%z0q(m) = water_pars_f%pars_xy(ind_w_z0h,j,i) ENDIF IF ( water_pars_f%pars_xy(ind_w_lambda_s,j,i) /= & water_pars_f%fill ) & surf_lsm_v(l)%lambda_surface_s(m) = & water_pars_f%pars_xy(ind_w_lambda_s,j,i) IF ( water_pars_f%pars_xy(ind_w_lambda_u,j,i) /= & water_pars_f%fill ) & surf_lsm_v(l)%lambda_surface_u(m) = & water_pars_f%pars_xy(ind_w_lambda_u,j,i) IF ( water_pars_f%pars_xy(ind_w_at,j,i) /= & water_pars_f%fill ) & surf_lsm_v(l)%albedo_type(ind_wat,m) = & INT( water_pars_f%pars_xy(ind_w_at,j,i) ) IF ( water_pars_f%pars_xy(ind_w_emis,j,i) /= & water_pars_f%fill ) & surf_lsm_v(l)%emissivity(ind_wat,m) = & water_pars_f%pars_xy(ind_w_emis,j,i) ENDIF ENDDO ENDDO ENDIF ! !-- Initialize pavement-type surfaces, level 1 IF ( pavement_type /= 0 ) THEN ! !-- When a pavement_type is used, overwrite a possible setting of !-- the pavement depth as it is already defined by the pavement type pavement_depth_level = 0 IF ( z0_pavement == 9999999.9_wp ) THEN z0_pavement = pavement_pars(ind_p_z0,pavement_type) ENDIF IF ( z0h_pavement == 9999999.9_wp ) THEN z0h_pavement = pavement_pars(ind_p_z0h,pavement_type) ENDIF IF ( pavement_heat_conduct == 9999999.9_wp ) THEN pavement_heat_conduct = pavement_subsurface_pars_1(0,pavement_type) ENDIF IF ( pavement_heat_capacity == 9999999.9_wp ) THEN pavement_heat_capacity = pavement_subsurface_pars_2(0,pavement_type) ENDIF IF ( albedo_type == 9999999 .AND. albedo == 9999999.9_wp ) THEN albedo_type = INT(pavement_pars(ind_p_at,pavement_type)) ENDIF IF ( emissivity == 9999999.9_wp ) THEN emissivity = pavement_pars(ind_p_emis,pavement_type) ENDIF ! !-- If the depth level of the pavement is not set, determine it from !-- lookup table. IF ( pavement_depth_level == 0 ) THEN DO k = nzb_soil, nzt_soil IF ( pavement_subsurface_pars_1(k,pavement_type) == 9999999.9_wp & .OR. pavement_subsurface_pars_2(k,pavement_type) == 9999999.9_wp)& THEN nzt_pavement = k-1 EXIT ENDIF ENDDO ELSE nzt_pavement = pavement_depth_level ENDIF ENDIF ! !-- Level 1 initialization of pavement type surfaces. Horizontally !-- homogeneous characteristics are assumed surf_lsm_h%nzt_pavement = pavement_depth_level DO m = 1, surf_lsm_h%ns IF ( surf_lsm_h%pavement_surface(m) ) THEN surf_lsm_h%nzt_pavement(m) = nzt_pavement surf_lsm_h%z0(m) = z0_pavement surf_lsm_h%z0h(m) = z0h_pavement surf_lsm_h%z0q(m) = z0h_pavement surf_lsm_h%lambda_surface_s(m) = pavement_heat_conduct & * ddz_soil(nzb_soil) & * 2.0_wp surf_lsm_h%lambda_surface_u(m) = pavement_heat_conduct & * ddz_soil(nzb_soil) & * 2.0_wp surf_lsm_h%c_surface(m) = pavement_heat_capacity & * dz_soil(nzb_soil) & * 0.25_wp surf_lsm_h%albedo_type(ind_pav,m) = albedo_type surf_lsm_h%emissivity(ind_pav,m) = emissivity IF ( pavement_type /= 0 ) THEN DO k = nzb_soil, surf_lsm_h%nzt_pavement(m) surf_lsm_h%lambda_h_def(k,m) = & pavement_subsurface_pars_1(k,pavement_type) surf_lsm_h%rho_c_total_def(k,m) = & pavement_subsurface_pars_2(k,pavement_type) ENDDO ELSE surf_lsm_v(l)%lambda_h_def(:,m) = pavement_heat_conduct surf_lsm_v(l)%rho_c_total_def(:,m) = pavement_heat_capacity ENDIF ENDIF ENDDO DO l = 0, 3 surf_lsm_v(l)%nzt_pavement = pavement_depth_level DO m = 1, surf_lsm_v(l)%ns IF ( surf_lsm_v(l)%pavement_surface(m) ) THEN surf_lsm_v(l)%nzt_pavement(m) = nzt_pavement surf_lsm_v(l)%z0(m) = z0_pavement surf_lsm_v(l)%z0h(m) = z0h_pavement surf_lsm_v(l)%z0q(m) = z0h_pavement surf_lsm_v(l)%lambda_surface_s(m) = pavement_heat_conduct & * ddz_soil(nzb_soil) & * 2.0_wp surf_lsm_v(l)%lambda_surface_u(m) = pavement_heat_conduct & * ddz_soil(nzb_soil) & * 2.0_wp surf_lsm_v(l)%c_surface(m) = pavement_heat_capacity & * dz_soil(nzb_soil) & * 0.25_wp surf_lsm_v(l)%albedo_type(ind_pav,m) = albedo_type surf_lsm_v(l)%emissivity(ind_pav,m) = emissivity IF ( pavement_type /= 0 ) THEN DO k = nzb_soil, surf_lsm_v(l)%nzt_pavement(m) surf_lsm_v(l)%lambda_h_def(k,m) = & pavement_subsurface_pars_1(k,pavement_type) surf_lsm_v(l)%rho_c_total_def(k,m) = & pavement_subsurface_pars_2(k,pavement_type) ENDDO ELSE surf_lsm_v(l)%lambda_h_def(:,m) = pavement_heat_conduct surf_lsm_v(l)%rho_c_total_def(:,m) = pavement_heat_capacity ENDIF ENDIF ENDDO ENDDO ! !-- Level 2 initialization of pavement type surfaces via pavement_type read !-- from file. Pavement surfaces are initialized for each (y,x)-grid point !-- individually. IF ( pavement_type_f%from_file ) THEN ! !-- Horizontal surfaces DO m = 1, surf_lsm_h%ns i = surf_lsm_h%i(m) j = surf_lsm_h%j(m) st = pavement_type_f%var(j,i) IF ( st /= pavement_type_f%fill .AND. st /= 0 ) THEN ! !-- Determine deepmost index of pavement layer DO k = nzb_soil, nzt_soil IF ( pavement_subsurface_pars_1(k,st) == 9999999.9_wp & .OR. pavement_subsurface_pars_2(k,st) == 9999999.9_wp) & THEN surf_lsm_h%nzt_pavement(m) = k-1 EXIT ENDIF ENDDO surf_lsm_h%z0(m) = pavement_pars(ind_p_z0,st) surf_lsm_h%z0h(m) = pavement_pars(ind_p_z0h,st) surf_lsm_h%z0q(m) = pavement_pars(ind_p_z0h,st) surf_lsm_h%lambda_surface_s(m) = & pavement_subsurface_pars_1(0,st) & * ddz_soil(nzb_soil) & * 2.0_wp surf_lsm_h%lambda_surface_u(m) = & pavement_subsurface_pars_1(0,st) & * ddz_soil(nzb_soil) & * 2.0_wp surf_lsm_h%c_surface(m) = & pavement_subsurface_pars_2(0,st)& * dz_soil(nzb_soil) & * 0.25_wp surf_lsm_h%albedo_type(ind_pav,m) = INT( pavement_pars(ind_p_at,st) ) surf_lsm_h%emissivity(ind_pav,m) = pavement_pars(ind_p_emis,st) DO k = nzb_soil, surf_lsm_h%nzt_pavement(m) surf_lsm_h%lambda_h_def(k,m) = & pavement_subsurface_pars_1(k,pavement_type) surf_lsm_h%rho_c_total_def(k,m) = & pavement_subsurface_pars_2(k,pavement_type) ENDDO ENDIF ENDDO ! !-- Vertical surfaces DO l = 0, 3 DO m = 1, surf_lsm_v(l)%ns i = surf_lsm_v(l)%i(m) + MERGE( 0, surf_lsm_v(l)%ioff, & surf_lsm_v(l)%building_covered(m) ) j = surf_lsm_v(l)%j(m) + MERGE( 0, surf_lsm_v(l)%joff, & surf_lsm_v(l)%building_covered(m) ) st = pavement_type_f%var(j,i) IF ( st /= pavement_type_f%fill .AND. st /= 0 ) THEN ! !-- Determine deepmost index of pavement layer DO k = nzb_soil, nzt_soil IF ( pavement_subsurface_pars_1(k,st) == 9999999.9_wp & .OR. pavement_subsurface_pars_2(k,st) == 9999999.9_wp) & THEN surf_lsm_v(l)%nzt_pavement(m) = k-1 EXIT ENDIF ENDDO surf_lsm_v(l)%z0(m) = pavement_pars(ind_p_z0,st) surf_lsm_v(l)%z0h(m) = pavement_pars(ind_p_z0h,st) surf_lsm_v(l)%z0q(m) = pavement_pars(ind_p_z0h,st) surf_lsm_v(l)%lambda_surface_s(m) = & pavement_subsurface_pars_1(0,st) & * ddz_soil(nzb_soil) & * 2.0_wp surf_lsm_v(l)%lambda_surface_u(m) = & pavement_subsurface_pars_1(0,st) & * ddz_soil(nzb_soil) & * 2.0_wp surf_lsm_v(l)%c_surface(m) = & pavement_subsurface_pars_2(0,st) & * dz_soil(nzb_soil) & * 0.25_wp surf_lsm_v(l)%albedo_type(ind_pav,m) = & INT( pavement_pars(ind_p_at,st) ) surf_lsm_v(l)%emissivity(ind_pav,m) = & pavement_pars(ind_p_emis,st) DO k = nzb_soil, surf_lsm_h%nzt_pavement(m) surf_lsm_v(l)%lambda_h_def(k,m) = & pavement_subsurface_pars_1(k,pavement_type) surf_lsm_v(l)%rho_c_total_def(k,m) = & pavement_subsurface_pars_2(k,pavement_type) ENDDO ENDIF ENDDO ENDDO ENDIF ! !-- Level 3, initialization of pavement parameters at single (x,y) !-- position via pavement_pars read from file. IF ( pavement_pars_f%from_file ) THEN ! !-- Horizontal surfaces DO m = 1, surf_lsm_h%ns i = surf_lsm_h%i(m) j = surf_lsm_h%j(m) ! !-- If surface element is not a pavement surface and any value in !-- pavement_pars is given, neglect this information and give an !-- informative message that this value will not be used. IF ( .NOT. surf_lsm_h%pavement_surface(m) .AND. & ANY( pavement_pars_f%pars_xy(:,j,i) /= & pavement_pars_f%fill ) ) THEN WRITE( message_string, * ) & 'surface element at grid point (j,i) = (', & j, i, ') is not a pavement surface, ', & 'so that information given in ', & 'pavement_pars at this point is neglected.' CALL message( 'land_surface_model_mod', 'PA0999', 0, 0, 0, 6, 0 ) ELSE IF ( pavement_pars_f%pars_xy(ind_p_z0,j,i) /= & pavement_pars_f%fill ) & surf_lsm_h%z0(m) = pavement_pars_f%pars_xy(ind_p_z0,j,i) IF ( pavement_pars_f%pars_xy(ind_p_z0h,j,i) /= & pavement_pars_f%fill ) THEN surf_lsm_h%z0h(m) = pavement_pars_f%pars_xy(ind_p_z0h,j,i) surf_lsm_h%z0q(m) = pavement_pars_f%pars_xy(ind_p_z0h,j,i) ENDIF IF ( pavement_subsurface_pars_f%pars_xyz(ind_p_lambda_h,0,j,i) & /= pavement_subsurface_pars_f%fill ) THEN surf_lsm_h%lambda_surface_s(m) = & pavement_subsurface_pars_f%pars_xyz(ind_p_lambda_h,0,j,i)& * ddz_soil(nzb_soil) & * 2.0_wp surf_lsm_h%lambda_surface_u(m) = & pavement_subsurface_pars_f%pars_xyz(ind_p_lambda_h,0,j,i)& * ddz_soil(nzb_soil) & * 2.0_wp ENDIF IF ( pavement_subsurface_pars_f%pars_xyz(ind_p_rho_c,0,j,i) /= & pavement_subsurface_pars_f%fill ) THEN surf_lsm_h%c_surface(m) = & pavement_subsurface_pars_f%pars_xyz(ind_p_rho_c,0,j,i) & * dz_soil(nzb_soil) & * 0.25_wp ENDIF IF ( pavement_pars_f%pars_xy(ind_p_at,j,i) /= & pavement_pars_f%fill ) & surf_lsm_h%albedo_type(ind_pav,m) = & INT( pavement_pars(ind_p_at,st) ) IF ( pavement_pars_f%pars_xy(ind_p_emis,j,i) /= & pavement_pars_f%fill ) & surf_lsm_h%emissivity(ind_pav,m) = & pavement_pars(ind_p_emis,st) ENDIF ENDDO ! !-- Vertical surfaces DO l = 0, 3 DO m = 1, surf_lsm_v(l)%ns i = surf_lsm_v(l)%i(m) + MERGE( 0, surf_lsm_v(l)%ioff, & surf_lsm_v(l)%building_covered(m) ) j = surf_lsm_v(l)%j(m) + MERGE( 0, surf_lsm_v(l)%joff, & surf_lsm_v(l)%building_covered(m) ) ! !-- If surface element is not a pavement surface and any value in !-- pavement_pars is given, neglect this information and give an !-- informative message that this value will not be used. IF ( .NOT. surf_lsm_v(l)%pavement_surface(m) .AND. & ANY( pavement_pars_f%pars_xy(:,j,i) /= & pavement_pars_f%fill ) ) THEN WRITE( message_string, * ) & 'surface element at grid point (j,i) = (', & j, i, ') is not a pavement surface, ', & 'so that information given in ', & 'pavement_pars at this point is neglected.' CALL message( 'land_surface_model_mod', 'PA0999', 0, 0, 0, 6, 0 ) ELSE IF ( pavement_pars_f%pars_xy(ind_p_z0,j,i) /= & pavement_pars_f%fill ) & surf_lsm_v(l)%z0(m) = pavement_pars_f%pars_xy(ind_p_z0,j,i) IF ( pavement_pars_f%pars_xy(ind_p_z0h,j,i) /= & pavement_pars_f%fill ) THEN surf_lsm_v(l)%z0h(m) = pavement_pars_f%pars_xy(ind_p_z0h,j,i) surf_lsm_v(l)%z0q(m) = pavement_pars_f%pars_xy(ind_p_z0h,j,i) ENDIF IF ( pavement_subsurface_pars_f%pars_xyz(ind_p_lambda_h,0,j,i)& /= pavement_subsurface_pars_f%fill ) THEN surf_lsm_v(l)%lambda_surface_s(m) = & pavement_subsurface_pars_f%pars_xyz(ind_p_lambda_h,0,j,i)& * ddz_soil(nzb_soil) & * 2.0_wp surf_lsm_v(l)%lambda_surface_u(m) = & pavement_subsurface_pars_f%pars_xyz(ind_p_lambda_h,0,j,i)& * ddz_soil(nzb_soil) & * 2.0_wp ENDIF IF ( pavement_subsurface_pars_f%pars_xyz(ind_p_rho_c,0,j,i) & /= pavement_subsurface_pars_f%fill ) THEN surf_lsm_v(l)%c_surface(m) = & pavement_subsurface_pars_f%pars_xyz(ind_p_rho_c,0,j,i)& * dz_soil(nzb_soil) & * 0.25_wp ENDIF IF ( pavement_pars_f%pars_xy(ind_p_at,j,i) /= & pavement_pars_f%fill ) & surf_lsm_v(l)%albedo_type(ind_pav,m) = & INT( pavement_pars(ind_p_at,st) ) IF ( pavement_pars_f%pars_xy(ind_p_emis,j,i) /= & pavement_pars_f%fill ) & surf_lsm_v(l)%emissivity(ind_pav,m) = & pavement_pars(ind_p_emis,st) ENDIF ENDDO ENDDO ENDIF ! !-- Moreover, for grid points which are flagged with pavement-type 0 or whre !-- pavement_subsurface_pars_f is provided, soil heat conductivity and !-- capacity are initialized with parameters given in !-- pavement_subsurface_pars read from file. IF ( pavement_subsurface_pars_f%from_file ) THEN ! !-- Set pavement depth to nzt_soil. Please note, this is just a !-- workaround at the moment. DO m = 1, surf_lsm_h%ns IF ( surf_lsm_h%pavement_surface(m) ) THEN i = surf_lsm_h%i(m) j = surf_lsm_h%j(m) surf_lsm_h%nzt_pavement(m) = nzt_soil DO k = nzb_soil, nzt_soil surf_lsm_h%lambda_h_def(k,m) = & pavement_subsurface_pars_f%pars_xyz(ind_p_lambda_h,k,j,i) surf_lsm_h%rho_c_total_def(k,m) = & pavement_subsurface_pars_f%pars_xyz(ind_p_rho_c,k,j,i) ENDDO ENDIF ENDDO DO l = 0, 3 DO m = 1, surf_lsm_v(l)%ns IF ( surf_lsm_v(l)%pavement_surface(m) ) THEN i = surf_lsm_v(l)%i(m) + MERGE( 0, surf_lsm_v(l)%ioff, & surf_lsm_v(l)%building_covered(m) ) j = surf_lsm_v(l)%j(m) + MERGE( 0, surf_lsm_v(l)%joff, & surf_lsm_v(l)%building_covered(m) ) surf_lsm_v(l)%nzt_pavement(m) = nzt_soil DO k = nzb_soil, nzt_soil surf_lsm_v(l)%lambda_h_def(k,m) = & pavement_subsurface_pars_f%pars_xyz(ind_p_lambda_h,k,j,i) surf_lsm_v(l)%rho_c_total_def(k,m) = & pavement_subsurface_pars_f%pars_xyz(ind_p_rho_c,k,j,i) ENDDO ENDIF ENDDO ENDDO ENDIF ! !-- Initial run actions IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN ! !-- First, initialize soil temperature and moisture. !-- According to the initialization for surface and soil parameters, !-- initialize soil moisture and temperature via a level approach. This !-- is to assure that all surface elements are initialized, even if !-- data provided from input file contains fill values at some locations. !-- Level 1, initialization via profiles given in parameter file DO m = 1, surf_lsm_h%ns IF ( surf_lsm_h%vegetation_surface(m) .OR. & surf_lsm_h%pavement_surface(m) ) THEN DO k = nzb_soil, nzt_soil t_soil_h%var_2d(k,m) = soil_temperature(k) m_soil_h%var_2d(k,m) = soil_moisture(k) ENDDO t_soil_h%var_2d(nzt_soil+1,m) = deep_soil_temperature ENDIF ENDDO DO l = 0, 3 DO m = 1, surf_lsm_v(l)%ns IF ( surf_lsm_v(l)%vegetation_surface(m) .OR. & surf_lsm_v(l)%pavement_surface(m) ) THEN DO k = nzb_soil, nzt_soil t_soil_v(l)%var_2d(k,m) = soil_temperature(k) m_soil_v(l)%var_2d(k,m) = soil_moisture(k) ENDDO t_soil_v(l)%var_2d(nzt_soil+1,m) = deep_soil_temperature ENDIF ENDDO ENDDO ! !-- Level 2, if soil moisture and/or temperature are !-- provided from file, interpolate / extrapolate the provided data !-- onto the respective soil layers. Please note, both, zs as well as !-- init_3d%z_soil indicate a depth with positive values, so that no !-- distinction between atmosphere is required concerning interpolation. !-- Start with soil moisture IF ( init_3d%from_file_msoil ) THEN IF ( init_3d%lod_msoil == 1 ) THEN DO m = 1, surf_lsm_h%ns CALL netcdf_data_input_interpolate( & m_soil_h%var_2d(nzb_soil:nzt_soil,m), & init_3d%msoil_init(:), & zs(nzb_soil:nzt_soil), init_3d%z_soil, & nzb_soil, nzt_soil, & nzb_soil, init_3d%nzs-1 ) ENDDO DO l = 0, 3 DO m = 1, surf_lsm_v(l)%ns CALL netcdf_data_input_interpolate( & m_soil_v(l)%var_2d(nzb_soil:nzt_soil,m),& init_3d%msoil_init(:), & zs(nzb_soil:nzt_soil), init_3d%z_soil, & nzb_soil, nzt_soil, & nzb_soil, init_3d%nzs-1 ) ENDDO ENDDO ELSE DO m = 1, surf_lsm_h%ns i = surf_lsm_h%i(m) j = surf_lsm_h%j(m) IF ( init_3d%msoil(0,j,i) /= init_3d%fill_msoil ) & CALL netcdf_data_input_interpolate( & m_soil_h%var_2d(nzb_soil:nzt_soil,m), & init_3d%msoil(:,j,i), & zs(nzb_soil:nzt_soil), init_3d%z_soil, & nzb_soil, nzt_soil, & nzb_soil, init_3d%nzs-1 ) ENDDO DO l = 0, 3 DO m = 1, surf_lsm_v(l)%ns i = surf_lsm_v(l)%i(m) + MERGE( 0, surf_lsm_v(l)%ioff, & surf_lsm_v(l)%building_covered(m) ) j = surf_lsm_v(l)%j(m) + MERGE( 0, surf_lsm_v(l)%joff, & surf_lsm_v(l)%building_covered(m) ) IF ( init_3d%msoil(0,j,i) /= init_3d%fill_msoil ) & CALL netcdf_data_input_interpolate( & m_soil_v(l)%var_2d(nzb_soil:nzt_soil,m),& init_3d%msoil(:,j,i), & zs(nzb_soil:nzt_soil), init_3d%z_soil, & nzb_soil, nzt_soil, & nzb_soil, init_3d%nzs-1 ) ENDDO ENDDO ENDIF ENDIF ! !-- Soil temperature IF ( init_3d%from_file_tsoil ) THEN IF ( init_3d%lod_tsoil == 1 ) THEN ! change to 1 if provided correctly by INIFOR DO m = 1, surf_lsm_h%ns CALL netcdf_data_input_interpolate( & t_soil_h%var_2d(nzb_soil:nzt_soil,m), & init_3d%tsoil_init(:), & zs(nzb_soil:nzt_soil), init_3d%z_soil, & nzb_soil, nzt_soil, & nzb_soil, init_3d%nzs-1 ) t_soil_h%var_2d(nzt_soil+1,m) = t_soil_h%var_2d(nzt_soil,m) ENDDO DO l = 0, 3 DO m = 1, surf_lsm_v(l)%ns CALL netcdf_data_input_interpolate( & t_soil_v(l)%var_2d(nzb_soil:nzt_soil,m),& init_3d%tsoil_init(:), & zs(nzb_soil:nzt_soil), init_3d%z_soil, & nzb_soil, nzt_soil, & nzb_soil, init_3d%nzs-1 ) t_soil_v(l)%var_2d(nzt_soil+1,m) = & t_soil_v(l)%var_2d(nzt_soil,m) ENDDO ENDDO ELSE DO m = 1, surf_lsm_h%ns i = surf_lsm_h%i(m) j = surf_lsm_h%j(m) IF ( init_3d%msoil(0,j,i) /= init_3d%fill_msoil ) & CALL netcdf_data_input_interpolate( & t_soil_h%var_2d(nzb_soil:nzt_soil,m), & init_3d%tsoil(:,j,i), & zs(nzb_soil:nzt_soil), init_3d%z_soil, & nzb_soil, nzt_soil, & nzb_soil, init_3d%nzs-1 ) t_soil_h%var_2d(nzt_soil+1,m) = t_soil_h%var_2d(nzt_soil,m) ENDDO DO l = 0, 3 DO m = 1, surf_lsm_v(l)%ns i = surf_lsm_v(l)%i(m) + MERGE( 0, surf_lsm_v(l)%ioff, & surf_lsm_v(l)%building_covered(m) ) j = surf_lsm_v(l)%j(m) + MERGE( 0, surf_lsm_v(l)%joff, & surf_lsm_v(l)%building_covered(m) ) IF ( init_3d%msoil(0,j,i) /= init_3d%fill_msoil ) & CALL netcdf_data_input_interpolate( & t_soil_v(l)%var_2d(nzb_soil:nzt_soil,m),& init_3d%tsoil(:,j,i), & zs(nzb_soil:nzt_soil), init_3d%z_soil, & nzb_soil, nzt_soil, & nzb_soil, init_3d%nzs-1 ) t_soil_v(l)%var_2d(nzt_soil+1,m) = & t_soil_v(l)%var_2d(nzt_soil,m) ENDDO ENDDO ENDIF ENDIF ! !-- Further initialization DO m = 1, surf_lsm_h%ns i = surf_lsm_h%i(m) j = surf_lsm_h%j(m) k = surf_lsm_h%k(m) ! !-- Calculate surface temperature. In case of bare soil, the surface !-- temperature must be reset to the soil temperature in the first soil !-- layer IF ( surf_lsm_h%lambda_surface_s(m) == 0.0_wp ) THEN t_surface_h%var_1d(m) = t_soil_h%var_2d(nzb_soil,m) surf_lsm_h%pt_surface(m) = t_soil_h%var_2d(nzb_soil,m) / exn ELSE t_surface_h%var_1d(m) = pt(k-1,j,i) * exn surf_lsm_h%pt_surface(m) = pt(k-1,j,i) ENDIF IF ( cloud_physics .OR. cloud_droplets ) THEN surf_lsm_h%pt1(m) = pt(k,j,i) + l_d_cp * pt_d_t(k) * ql(k,j,i) ELSE surf_lsm_h%pt1(m) = pt(k,j,i) ENDIF ! !-- Assure that r_a cannot be zero at model start IF ( surf_lsm_h%pt1(m) == surf_lsm_h%pt_surface(m) ) & surf_lsm_h%pt1(m) = surf_lsm_h%pt1(m) + 1.0E-20_wp surf_lsm_h%us(m) = 0.1_wp surf_lsm_h%ts(m) = ( surf_lsm_h%pt1(m) - surf_lsm_h%pt_surface(m) )& / surf_lsm_h%r_a(m) surf_lsm_h%shf(m) = - surf_lsm_h%us(m) * surf_lsm_h%ts(m) & * rho_surface ENDDO ! !-- Vertical surfaces DO l = 0, 3 DO m = 1, surf_lsm_v(l)%ns i = surf_lsm_v(l)%i(m) j = surf_lsm_v(l)%j(m) k = surf_lsm_v(l)%k(m) ! !-- Calculate surface temperature. In case of bare soil, the surface !-- temperature must be reset to the soil temperature in the first soil !-- layer IF ( surf_lsm_v(l)%lambda_surface_s(m) == 0.0_wp ) THEN t_surface_v(l)%var_1d(m) = t_soil_v(l)%var_2d(nzb_soil,m) surf_lsm_v(l)%pt_surface(m) = t_soil_v(l)%var_2d(nzb_soil,m) / exn ELSE j_off = surf_lsm_v(l)%joff i_off = surf_lsm_v(l)%ioff t_surface_v(l)%var_1d(m) = pt(k,j+j_off,i+i_off) * exn surf_lsm_v(l)%pt_surface(m) = pt(k,j+j_off,i+i_off) ENDIF IF ( cloud_physics .OR. cloud_droplets ) THEN surf_lsm_v(l)%pt1(m) = pt(k,j,i) + l_d_cp * pt_d_t(k) * ql(k,j,i) ELSE surf_lsm_v(l)%pt1(m) = pt(k,j,i) ENDIF ! !-- Assure that r_a cannot be zero at model start IF ( surf_lsm_v(l)%pt1(m) == surf_lsm_v(l)%pt_surface(m) ) & surf_lsm_v(l)%pt1(m) = surf_lsm_v(l)%pt1(m) + 1.0E-20_wp ! !-- Set artifical values for ts and us so that r_a has its initial value !-- for the first time step. Only for interior core domain, not for ghost points surf_lsm_v(l)%us(m) = 0.1_wp surf_lsm_v(l)%ts(m) = ( surf_lsm_v(l)%pt1(m) - surf_lsm_v(l)%pt_surface(m) ) /& surf_lsm_v(l)%r_a(m) surf_lsm_v(l)%shf(m) = - surf_lsm_v(l)%us(m) * & surf_lsm_v(l)%ts(m) * rho_surface ENDDO ENDDO ENDIF ! !-- Level 1 initialization of root distribution - provided by the user via !-- via namelist. DO m = 1, surf_lsm_h%ns DO k = nzb_soil, nzt_soil surf_lsm_h%root_fr(k,m) = root_fraction(k) ENDDO ENDDO DO l = 0, 3 DO m = 1, surf_lsm_v(l)%ns DO k = nzb_soil, nzt_soil surf_lsm_v(l)%root_fr(k,m) = root_fraction(k) ENDDO ENDDO ENDDO ! !-- Level 2 initialization of root distribution. !-- When no root distribution is given by the user, use look-up table to prescribe !-- the root fraction in the individual soil layers. IF ( ALL( root_fraction == 9999999.9_wp ) ) THEN ! !-- First, calculate the index bounds for integration n_soil_layers_total = nzt_soil - nzb_soil + 6 ALLOCATE ( bound(0:n_soil_layers_total) ) ALLOCATE ( bound_root_fr(0:n_soil_layers_total) ) kn = 0 ko = 0 bound(0) = 0.0_wp DO k = 1, n_soil_layers_total-1 IF ( zs_layer(kn) <= zs_ref(ko) ) THEN bound(k) = zs_layer(kn) bound_root_fr(k) = ko kn = kn + 1 IF ( kn > nzt_soil+1 ) THEN kn = nzt_soil ENDIF ELSE bound(k) = zs_ref(ko) bound_root_fr(k) = ko ko = ko + 1 IF ( ko > 3 ) THEN ko = 3 ENDIF ENDIF ENDDO ! !-- Integrate over all soil layers based on the four-layer root fraction kzs = 1 root_fraction = 0.0_wp DO k = 0, n_soil_layers_total-2 kroot = bound_root_fr(k+1) root_fraction(kzs-1) = root_fraction(kzs-1) & + root_distribution(kroot,vegetation_type) & / dz_soil_ref(kroot) * ( bound(k+1) - bound(k) ) IF ( bound(k+1) == zs_layer(kzs-1) ) THEN kzs = kzs+1 ENDIF ENDDO ! !-- Normalize so that the sum of all fractions equals one root_fraction = root_fraction / SUM(root_fraction) DEALLOCATE ( bound ) DEALLOCATE ( bound_root_fr ) ! !-- Map calculated root fractions DO m = 1, surf_lsm_h%ns DO k = nzb_soil, nzt_soil IF ( surf_lsm_h%pavement_surface(m) .AND. & k <= surf_lsm_h%nzt_pavement(m) ) THEN surf_lsm_h%root_fr(k,m) = 0.0_wp ELSE surf_lsm_h%root_fr(k,m) = root_fraction(k) ENDIF ENDDO ! !-- Normalize so that the sum = 1. Only relevant when the root !-- distribution was set to zero due to pavement at some layers. IF ( SUM( surf_lsm_h%root_fr(:,m) ) > 0.0_wp ) THEN DO k = nzb_soil, nzt_soil surf_lsm_h%root_fr(k,m) = surf_lsm_h%root_fr(k,m) & / SUM( surf_lsm_h%root_fr(:,m) ) ENDDO ENDIF ENDDO DO l = 0, 3 DO m = 1, surf_lsm_v(l)%ns DO k = nzb_soil, nzt_soil IF ( surf_lsm_v(l)%pavement_surface(m) .AND. & k <= surf_lsm_h%nzt_pavement(m) ) THEN surf_lsm_v(l)%root_fr(k,m) = 0.0_wp ELSE surf_lsm_v(l)%root_fr(k,m) = root_fraction(k) ENDIF ENDDO ! !-- Normalize so that the sum = 1. Only relevant when the root !-- distribution was set to zero due to pavement at some layers. IF ( SUM( surf_lsm_v(l)%root_fr(:,m) ) > 0.0_wp ) THEN DO k = nzb_soil, nzt_soil surf_lsm_v(l)%root_fr(k,m) = surf_lsm_v(l)%root_fr(k,m) & / SUM( surf_lsm_v(l)%root_fr(:,m) ) ENDDO ENDIF ENDDO ENDDO ENDIF ! !-- Level 3 initialization of root distribution. !-- Take value from file IF ( root_area_density_lsm_f%from_file ) THEN DO m = 1, surf_lsm_h%ns IF ( surf_lsm_h%vegetation_surface(m) ) THEN i = surf_lsm_h%i(m) + MERGE( 0, surf_lsm_v(l)%ioff, & surf_lsm_v(l)%building_covered(m) ) j = surf_lsm_h%j(m) + MERGE( 0, surf_lsm_v(l)%joff, & surf_lsm_v(l)%building_covered(m) ) DO k = nzb_soil, nzt_soil surf_lsm_h%root_fr(k,m) = root_area_density_lsm_f%var(k,j,i) ENDDO ENDIF ENDDO DO l = 0, 3 DO m = 1, surf_lsm_v(l)%ns IF ( surf_lsm_v(l)%vegetation_surface(m) ) THEN i = surf_lsm_v(l)%i(m) + MERGE( 0, surf_lsm_v(l)%ioff, & surf_lsm_v(l)%building_covered(m) ) j = surf_lsm_v(l)%j(m) + MERGE( 0, surf_lsm_v(l)%joff, & surf_lsm_v(l)%building_covered(m) ) DO k = nzb_soil, nzt_soil surf_lsm_v(l)%root_fr(k,m) = root_area_density_lsm_f%var(k,j,i) ENDDO ENDIF ENDDO ENDDO ENDIF ! !-- Possibly do user-defined actions (e.g. define heterogeneous land surface) CALL user_init_land_surface ! !-- Calculate new roughness lengths (for water surfaces only, i.e. only !- horizontal surfaces) IF ( .NOT. constant_roughness ) CALL calc_z0_water_surface t_soil_h_p = t_soil_h m_soil_h_p = m_soil_h m_liq_h_p = m_liq_h t_surface_h_p = t_surface_h t_soil_v_p = t_soil_v m_soil_v_p = m_soil_v m_liq_v_p = m_liq_v t_surface_v_p = t_surface_v !-- Store initial profiles of t_soil and m_soil (assuming they are !-- horizontally homogeneous on this PE) !-- DEACTIVATED FOR NOW - leads to error when number of locations with !-- soil model is zero on a PE. ! hom(nzb_soil:nzt_soil,1,90,:) = SPREAD( t_soil_h%var_2d(nzb_soil:nzt_soil,1), & ! 2, statistic_regions+1 ) ! hom(nzb_soil:nzt_soil,1,92,:) = SPREAD( m_soil_h%var_2d(nzb_soil:nzt_soil,1), & ! 2, statistic_regions+1 ) ! !-- Finally, make some consistency checks. !-- Ceck for eck for illegal combination of LAI and vegetation coverage. IF ( ANY( .NOT. surf_lsm_h%pavement_surface .AND. & surf_lsm_h%lai == 0.0_wp .AND. surf_lsm_h%c_veg == 1.0_wp ) & ) THEN message_string = 'For non-pavement surfaces the combination ' // & ' lai = 0.0 and c_veg = 1.0 is not allowed.' CALL message( 'lsm_read_restart_data', 'PA0999', 2, 2, 0, 6, 0 ) ENDIF DO l = 0, 3 IF ( ANY( .NOT. surf_lsm_v(l)%pavement_surface .AND. & surf_lsm_v(l)%lai == 0.0_wp .AND. & surf_lsm_v(l)%c_veg == 1.0_wp ) ) THEN message_string = 'For non-pavement surfaces the combination ' // & ' lai = 0.0 and c_veg = 1.0 is not allowed.' CALL message( 'lsm_read_restart_data', 'PA0999', 2, 2, 0, 6, 0 ) ENDIF ENDDO END SUBROUTINE lsm_init !------------------------------------------------------------------------------! ! Description: ! ------------ !> Allocate land surface model arrays and define pointers !------------------------------------------------------------------------------! SUBROUTINE lsm_init_arrays IMPLICIT NONE INTEGER(iwp) :: l !< index indicating facing of surface array ALLOCATE ( root_extr(nzb_soil:nzt_soil) ) root_extr = 0.0_wp ! !-- Allocate surface and soil temperature / humidity. Please note, !-- these arrays are allocated according to surface-data structure, !-- even if they do not belong to the data type due to the !-- pointer arithmetric (TARGET attribute is not allowed in a data-type). #if defined( __nopointer ) ! !-- Horizontal surfaces ALLOCATE ( m_liq_h_p%var_1d(1:surf_lsm_h%ns) ) ALLOCATE ( t_surface_h%var_1d(1:surf_lsm_h%ns) ) ALLOCATE ( t_surface_h_p%var_1d(1:surf_lsm_h%ns) ) ALLOCATE ( m_soil_h_p%var_2d(nzb_soil:nzt_soil,1:surf_lsm_h%ns) ) ALLOCATE ( t_soil_h_p%var_2d(nzb_soil:nzt_soil+1,1:surf_lsm_h%ns) ) ! !-- Vertical surfaces DO l = 0, 3 ALLOCATE ( m_liq_v(l)%var_1d(1:surf_lsm_v(l)%ns) ) ALLOCATE ( m_liq_v_p(l)%var_1d(1:surf_lsm_v(l)%ns) ) ALLOCATE ( t_surface_v(l)%var_1d(1:surf_lsm_v(l)%ns) ) ALLOCATE ( t_surface_v_p(l)%var_1d(1:surf_lsm_v(l)%ns) ) ALLOCATE ( m_soil_v(l)%var_2d(nzb_soil:nzt_soil,1:surf_lsm_v(l)%ns) ) ALLOCATE ( m_soil_v_p(l)%var_2d(nzb_soil:nzt_soil,1:surf_lsm_v(l)%ns) ) ALLOCATE ( t_soil_v(l)%var_2d(nzb_soil:nzt_soil+1,1:surf_lsm_v(l)%ns) ) ALLOCATE ( t_soil_v_p(l)%var_2d(nzb_soil:nzt_soil+1,1:surf_lsm_v(l)%ns) ) ENDDO ! !-- Allocate soil temperature and moisture. As these variables might be !-- already allocated in case of restarts, check this. IF ( .NOT. ALLOCATED( m_liq_h%var_1d ) ) & ALLOCATE ( m_liq_h%var_1d(1:surf_lsm_h%ns) ) IF ( .NOT. ALLOCATED( m_soil_h%var_2d ) ) & ALLOCATE ( m_soil_h%var_2d(nzb_soil:nzt_soil,1:surf_lsm_h%ns) ) IF ( .NOT. ALLOCATED( t_soil_h%var_2d ) ) & ALLOCATE ( t_soil_h%var_2d(nzb_soil:nzt_soil,1:surf_lsm_h%ns) ) DO l = 0, 3 IF ( .NOT. ALLOCATED( m_liq_v(l)%var_1d ) ) & ALLOCATE ( m_liq_v(l)%var_1d(1:surf_lsm_v(l)%ns) ) IF ( .NOT. ALLOCATED( m_soil_v(l)%var_2d ) ) & ALLOCATE ( m_soil_v(l)%var_2d(nzb_soil:nzt_soil,1:surf_lsm_v(l)%ns) ) IF ( .NOT. ALLOCATED( t_soil_v(l)%var_2d ) ) & ALLOCATE ( t_soil_v(l)%var_2d(nzb_soil:nzt_soil,1:surf_lsm_v(l)%ns) ) ENDDO #else ! !-- Horizontal surfaces ALLOCATE ( m_liq_h_1%var_1d(1:surf_lsm_h%ns) ) ALLOCATE ( m_liq_h_2%var_1d(1:surf_lsm_h%ns) ) ALLOCATE ( t_surface_h_1%var_1d(1:surf_lsm_h%ns) ) ALLOCATE ( t_surface_h_2%var_1d(1:surf_lsm_h%ns) ) ALLOCATE ( m_soil_h_1%var_2d(nzb_soil:nzt_soil,1:surf_lsm_h%ns) ) ALLOCATE ( m_soil_h_2%var_2d(nzb_soil:nzt_soil,1:surf_lsm_h%ns) ) ALLOCATE ( t_soil_h_1%var_2d(nzb_soil:nzt_soil+1,1:surf_lsm_h%ns) ) ALLOCATE ( t_soil_h_2%var_2d(nzb_soil:nzt_soil+1,1:surf_lsm_h%ns) ) ! !-- Vertical surfaces DO l = 0, 3 ALLOCATE ( m_liq_v_1(l)%var_1d(1:surf_lsm_v(l)%ns) ) ALLOCATE ( m_liq_v_2(l)%var_1d(1:surf_lsm_v(l)%ns) ) ALLOCATE ( t_surface_v_1(l)%var_1d(1:surf_lsm_v(l)%ns) ) ALLOCATE ( t_surface_v_2(l)%var_1d(1:surf_lsm_v(l)%ns) ) ALLOCATE ( m_soil_v_1(l)%var_2d(nzb_soil:nzt_soil,1:surf_lsm_v(l)%ns) ) ALLOCATE ( m_soil_v_2(l)%var_2d(nzb_soil:nzt_soil,1:surf_lsm_v(l)%ns) ) ALLOCATE ( t_soil_v_1(l)%var_2d(nzb_soil:nzt_soil+1,1:surf_lsm_v(l)%ns) ) ALLOCATE ( t_soil_v_2(l)%var_2d(nzb_soil:nzt_soil+1,1:surf_lsm_v(l)%ns) ) ENDDO #endif ! !-- Allocate array for heat flux in W/m2, required for radiation? !-- Consider to remove this array ALLOCATE( surf_lsm_h%surfhf(1:surf_lsm_h%ns) ) DO l = 0, 3 ALLOCATE( surf_lsm_v(l)%surfhf(1:surf_lsm_v(l)%ns) ) ENDDO ! !-- Allocate intermediate timestep arrays !-- Horizontal surfaces ALLOCATE ( tm_liq_h_m%var_1d(1:surf_lsm_h%ns) ) ALLOCATE ( tt_surface_h_m%var_1d(1:surf_lsm_h%ns) ) ALLOCATE ( tm_soil_h_m%var_2d(nzb_soil:nzt_soil,1:surf_lsm_h%ns) ) ALLOCATE ( tt_soil_h_m%var_2d(nzb_soil:nzt_soil,1:surf_lsm_h%ns) ) ! !-- Horizontal surfaces DO l = 0, 3 ALLOCATE ( tm_liq_v_m(l)%var_1d(1:surf_lsm_v(l)%ns) ) ALLOCATE ( tt_surface_v_m(l)%var_1d(1:surf_lsm_v(l)%ns) ) ALLOCATE ( tm_soil_v_m(l)%var_2d(nzb_soil:nzt_soil,1:surf_lsm_v(l)%ns) ) ALLOCATE ( tt_soil_v_m(l)%var_2d(nzb_soil:nzt_soil,1:surf_lsm_v(l)%ns) ) ENDDO ! !-- Allocate 2D vegetation model arrays !-- Horizontal surfaces ALLOCATE ( surf_lsm_h%building_surface(1:surf_lsm_h%ns) ) ALLOCATE ( surf_lsm_h%c_liq(1:surf_lsm_h%ns) ) ALLOCATE ( surf_lsm_h%c_surface(1:surf_lsm_h%ns) ) ALLOCATE ( surf_lsm_h%c_veg(1:surf_lsm_h%ns) ) ALLOCATE ( surf_lsm_h%f_sw_in(1:surf_lsm_h%ns) ) ALLOCATE ( surf_lsm_h%ghf(1:surf_lsm_h%ns) ) ALLOCATE ( surf_lsm_h%g_d(1:surf_lsm_h%ns) ) ALLOCATE ( surf_lsm_h%lai(1:surf_lsm_h%ns) ) ALLOCATE ( surf_lsm_h%lambda_surface_u(1:surf_lsm_h%ns) ) ALLOCATE ( surf_lsm_h%lambda_surface_s(1:surf_lsm_h%ns) ) ALLOCATE ( surf_lsm_h%nzt_pavement(1:surf_lsm_h%ns) ) ALLOCATE ( surf_lsm_h%pavement_surface(1:surf_lsm_h%ns) ) ALLOCATE ( surf_lsm_h%qsws_soil(1:surf_lsm_h%ns) ) ALLOCATE ( surf_lsm_h%qsws_liq(1:surf_lsm_h%ns) ) ALLOCATE ( surf_lsm_h%qsws_veg(1:surf_lsm_h%ns) ) ALLOCATE ( surf_lsm_h%rad_net_l(1:surf_lsm_h%ns) ) ALLOCATE ( surf_lsm_h%r_a(1:surf_lsm_h%ns) ) ALLOCATE ( surf_lsm_h%r_canopy(1:surf_lsm_h%ns) ) ALLOCATE ( surf_lsm_h%r_soil(1:surf_lsm_h%ns) ) ALLOCATE ( surf_lsm_h%r_soil_min(1:surf_lsm_h%ns) ) ALLOCATE ( surf_lsm_h%r_s(1:surf_lsm_h%ns) ) ALLOCATE ( surf_lsm_h%r_canopy_min(1:surf_lsm_h%ns) ) ALLOCATE ( surf_lsm_h%vegetation_surface(1:surf_lsm_h%ns) ) ALLOCATE ( surf_lsm_h%water_surface(1:surf_lsm_h%ns) ) surf_lsm_h%water_surface = .FALSE. surf_lsm_h%pavement_surface = .FALSE. surf_lsm_h%vegetation_surface = .FALSE. ! !-- Vertical surfaces DO l = 0, 3 ALLOCATE ( surf_lsm_v(l)%building_surface(1:surf_lsm_v(l)%ns) ) ALLOCATE ( surf_lsm_v(l)%c_liq(1:surf_lsm_v(l)%ns) ) ALLOCATE ( surf_lsm_v(l)%c_surface(1:surf_lsm_v(l)%ns) ) ALLOCATE ( surf_lsm_v(l)%c_veg(1:surf_lsm_v(l)%ns) ) ALLOCATE ( surf_lsm_v(l)%f_sw_in(1:surf_lsm_v(l)%ns) ) ALLOCATE ( surf_lsm_v(l)%ghf(1:surf_lsm_v(l)%ns) ) ALLOCATE ( surf_lsm_v(l)%g_d(1:surf_lsm_v(l)%ns) ) ALLOCATE ( surf_lsm_v(l)%lai(1:surf_lsm_v(l)%ns) ) ALLOCATE ( surf_lsm_v(l)%lambda_surface_u(1:surf_lsm_v(l)%ns) ) ALLOCATE ( surf_lsm_v(l)%lambda_surface_s(1:surf_lsm_v(l)%ns) ) ALLOCATE ( surf_lsm_v(l)%nzt_pavement(1:surf_lsm_v(l)%ns) ) ALLOCATE ( surf_lsm_v(l)%pavement_surface(1:surf_lsm_v(l)%ns) ) ALLOCATE ( surf_lsm_v(l)%qsws_soil(1:surf_lsm_v(l)%ns) ) ALLOCATE ( surf_lsm_v(l)%qsws_liq(1:surf_lsm_v(l)%ns) ) ALLOCATE ( surf_lsm_v(l)%qsws_veg(1:surf_lsm_v(l)%ns) ) ALLOCATE ( surf_lsm_v(l)%rad_net_l(1:surf_lsm_v(l)%ns) ) ALLOCATE ( surf_lsm_v(l)%r_a(1:surf_lsm_v(l)%ns) ) ALLOCATE ( surf_lsm_v(l)%r_canopy(1:surf_lsm_v(l)%ns) ) ALLOCATE ( surf_lsm_v(l)%r_soil(1:surf_lsm_v(l)%ns) ) ALLOCATE ( surf_lsm_v(l)%r_soil_min(1:surf_lsm_v(l)%ns) ) ALLOCATE ( surf_lsm_v(l)%r_s(1:surf_lsm_v(l)%ns) ) ALLOCATE ( surf_lsm_v(l)%r_canopy_min(1:surf_lsm_v(l)%ns) ) ALLOCATE ( surf_lsm_v(l)%vegetation_surface(1:surf_lsm_v(l)%ns) ) ALLOCATE ( surf_lsm_v(l)%water_surface(1:surf_lsm_v(l)%ns) ) surf_lsm_v(l)%water_surface = .FALSE. surf_lsm_v(l)%pavement_surface = .FALSE. surf_lsm_v(l)%vegetation_surface = .FALSE. ENDDO #if ! defined( __nopointer ) ! !-- Initial assignment of the pointers !-- Horizontal surfaces t_soil_h => t_soil_h_1; t_soil_h_p => t_soil_h_2 t_surface_h => t_surface_h_1; t_surface_h_p => t_surface_h_2 m_soil_h => m_soil_h_1; m_soil_h_p => m_soil_h_2 m_liq_h => m_liq_h_1; m_liq_h_p => m_liq_h_2 ! !-- Vertical surfaces t_soil_v => t_soil_v_1; t_soil_v_p => t_soil_v_2 t_surface_v => t_surface_v_1; t_surface_v_p => t_surface_v_2 m_soil_v => m_soil_v_1; m_soil_v_p => m_soil_v_2 m_liq_v => m_liq_v_1; m_liq_v_p => m_liq_v_2 #endif END SUBROUTINE lsm_init_arrays !------------------------------------------------------------------------------! ! Description: ! ------------ !> Parin for &lsmpar for land surface model !------------------------------------------------------------------------------! SUBROUTINE lsm_parin IMPLICIT NONE CHARACTER (LEN=80) :: line !< dummy string that contains the current line of the parameter file NAMELIST /lsm_par/ alpha_vangenuchten, c_surface, & canopy_resistance_coefficient, & constant_roughness, & conserve_water_content, & deep_soil_temperature, & dz_soil, & f_shortwave_incoming, field_capacity, & aero_resist_kray, hydraulic_conductivity, & lambda_surface_stable, & lambda_surface_unstable, leaf_area_index, & l_vangenuchten, min_canopy_resistance, & min_soil_resistance, n_vangenuchten, & pavement_depth_level, & pavement_heat_capacity, & pavement_heat_conduct, pavement_type, & residual_moisture, root_fraction, & saturation_moisture, skip_time_do_lsm, & soil_moisture, soil_temperature, & soil_type, & surface_type, & vegetation_coverage, vegetation_type, & water_temperature, water_type, & wilting_point, z0_vegetation, & z0h_vegetation, z0q_vegetation, z0_water, & z0h_water, z0q_water, z0_pavement, & z0h_pavement, z0q_pavement line = ' ' ! !-- Try to find land surface model package REWIND ( 11 ) line = ' ' DO WHILE ( INDEX( line, '&lsm_par' ) == 0 ) READ ( 11, '(A)', END=10 ) line ENDDO BACKSPACE ( 11 ) ! !-- Read user-defined namelist READ ( 11, lsm_par ) ! !-- Set flag that indicates that the land surface model is switched on land_surface = .TRUE. ! !-- Activate spinup IF ( spinup_time > 0.0_wp ) THEN coupling_start_time = spinup_time IF ( spinup_pt_mean == 9999999.9_wp ) THEN spinup_pt_mean = pt_surface ENDIF IF ( .NOT. spinup ) THEN end_time = end_time + spinup_time spinup = .TRUE. ENDIF ENDIF 10 CONTINUE END SUBROUTINE lsm_parin !------------------------------------------------------------------------------! ! Description: ! ------------ !> Soil model as part of the land surface model. The model predicts soil !> temperature and water content. !------------------------------------------------------------------------------! SUBROUTINE lsm_soil_model( horizontal, l, calc_soil_moisture ) IMPLICIT NONE INTEGER(iwp) :: k !< running index INTEGER(iwp) :: l !< surface-data type index indication facing INTEGER(iwp) :: m !< running index LOGICAL, INTENT(IN) :: calc_soil_moisture !< flag indicating whether soil moisture shall be calculated or not. LOGICAL :: horizontal !< flag indication horizontal wall, required to set pointer accordingly REAL(wp) :: h_vg !< Van Genuchten coef. h REAL(wp), DIMENSION(nzb_soil:nzt_soil) :: gamma_temp, & !< temp. gamma lambda_temp, & !< temp. lambda tend !< tendency TYPE(surf_type_lsm), POINTER :: surf_m_soil TYPE(surf_type_lsm), POINTER :: surf_m_soil_p TYPE(surf_type_lsm), POINTER :: surf_t_soil TYPE(surf_type_lsm), POINTER :: surf_t_soil_p TYPE(surf_type_lsm), POINTER :: surf_tm_soil_m TYPE(surf_type_lsm), POINTER :: surf_tt_soil_m TYPE(surf_type), POINTER :: surf !< surface-date type variable IF ( horizontal ) THEN surf => surf_lsm_h surf_m_soil => m_soil_h surf_m_soil_p => m_soil_h_p surf_t_soil => t_soil_h surf_t_soil_p => t_soil_h_p surf_tm_soil_m => tm_soil_h_m surf_tt_soil_m => tt_soil_h_m ELSE surf => surf_lsm_v(l) surf_m_soil => m_soil_v(l) surf_m_soil_p => m_soil_v_p(l) surf_t_soil => t_soil_v(l) surf_t_soil_p => t_soil_v_p(l) surf_tm_soil_m => tm_soil_v_m(l) surf_tt_soil_m => tt_soil_v_m(l) ENDIF DO m = 1, surf%ns IF ( .NOT. surf%water_surface(m) ) THEN DO k = nzb_soil, nzt_soil IF ( surf%pavement_surface(m) .AND. & k <= surf%nzt_pavement(m) ) THEN surf%rho_c_total(k,m) = surf%rho_c_total_def(k,m) lambda_temp(k) = surf%lambda_h_def(k,m) ELSE ! !-- Calculate volumetric heat capacity of the soil, taking !-- into account water content surf%rho_c_total(k,m) = (rho_c_soil * & ( 1.0_wp - surf%m_sat(k,m) ) & + rho_c_water * surf_m_soil%var_2d(k,m) ) ! !-- Calculate soil heat conductivity at the center of the soil !-- layers lambda_h_sat = lambda_h_sm**(1.0_wp - surf%m_sat(k,m)) * & lambda_h_water ** surf_m_soil%var_2d(k,m) ke = 1.0_wp + LOG10( MAX( 0.1_wp, surf_m_soil%var_2d(k,m) / & surf%m_sat(k,m) ) ) lambda_temp(k) = ke * (lambda_h_sat - lambda_h_dry) + & lambda_h_dry ENDIF ENDDO ! !-- Calculate soil heat conductivity (lambda_h) at the _layer level !-- using linear interpolation. For pavement surface, the !-- true pavement depth is considered DO k = nzb_soil, nzt_soil-1 surf%lambda_h(k,m) = ( lambda_temp(k+1) + lambda_temp(k) ) & * 0.5_wp ENDDO surf%lambda_h(nzt_soil,m) = lambda_temp(nzt_soil) ! !-- Prognostic equation for soil temperature t_soil tend(:) = 0.0_wp tend(nzb_soil) = ( 1.0_wp / surf%rho_c_total(nzb_soil,m) ) * & ( surf%lambda_h(nzb_soil,m) * ( surf_t_soil%var_2d(nzb_soil+1,m) & - surf_t_soil%var_2d(nzb_soil,m) ) * ddz_soil_center(nzb_soil) & + surf%ghf(m) ) * ddz_soil(nzb_soil) DO k = nzb_soil+1, nzt_soil tend(k) = ( 1.0_wp / surf%rho_c_total(k,m) ) & * ( surf%lambda_h(k,m) & * ( surf_t_soil%var_2d(k+1,m) - surf_t_soil%var_2d(k,m) ) & * ddz_soil_center(k) & - surf%lambda_h(k-1,m) & * ( surf_t_soil%var_2d(k,m) - surf_t_soil%var_2d(k-1,m) ) & * ddz_soil_center(k-1) & ) * ddz_soil(k) ENDDO surf_t_soil_p%var_2d(nzb_soil:nzt_soil,m) = & surf_t_soil%var_2d(nzb_soil:nzt_soil,m) & + dt_3d * ( tsc(2) & * tend(nzb_soil:nzt_soil) & + tsc(3) & * surf_tt_soil_m%var_2d(nzb_soil:nzt_soil,m) ) ! !-- Calculate t_soil tendencies for the next Runge-Kutta step IF ( timestep_scheme(1:5) == 'runge' ) THEN IF ( intermediate_timestep_count == 1 ) THEN DO k = nzb_soil, nzt_soil surf_tt_soil_m%var_2d(k,m) = tend(k) ENDDO ELSEIF ( intermediate_timestep_count < & intermediate_timestep_count_max ) THEN DO k = nzb_soil, nzt_soil surf_tt_soil_m%var_2d(k,m) = -9.5625_wp * tend(k) + & 5.3125_wp * & surf_tt_soil_m%var_2d(k,m) ENDDO ENDIF ENDIF DO k = nzb_soil, nzt_soil ! !-- In order to prevent water tranport through paved surfaces, !-- conductivity and diffusivity are set to zero IF ( surf%pavement_surface(m) .AND. & k <= surf%nzt_pavement(m) ) THEN lambda_temp(k) = 0.0_wp gamma_temp(k) = 0.0_wp ELSE ! !-- Calculate soil diffusivity at the center of the soil layers lambda_temp(k) = (- b_ch * surf%gamma_w_sat(k,m) * psi_sat & / surf%m_sat(k,m) ) * ( & MAX( surf_m_soil%var_2d(k,m), & surf%m_wilt(k,m) ) / surf%m_sat(k,m) )**( & b_ch + 2.0_wp ) ! !-- Parametrization of Van Genuchten !-- Calculate the hydraulic conductivity after Van Genuchten (1980) h_vg = ( ( ( surf%m_res(k,m) - surf%m_sat(k,m) ) / & ( surf%m_res(k,m) - & MAX( surf_m_soil%var_2d(k,m), surf%m_wilt(k,m) )& ) & )**( & surf%n_vg(k,m) / ( surf%n_vg(k,m) - 1.0_wp ) & ) - 1.0_wp & )**( 1.0_wp / surf%n_vg(k,m) ) / surf%alpha_vg(k,m) gamma_temp(k) = surf%gamma_w_sat(k,m) * ( ( ( 1.0_wp + & ( surf%alpha_vg(k,m) * h_vg )**surf%n_vg(k,m) & )**( & 1.0_wp - 1.0_wp / surf%n_vg(k,m)) - ( & surf%alpha_vg(k,m) * h_vg )**( surf%n_vg(k,m) & - 1.0_wp) )**2 ) & / ( ( 1.0_wp + ( surf%alpha_vg(k,m) * h_vg & )**surf%n_vg(k,m) )**( ( 1.0_wp - 1.0_wp & / surf%n_vg(k,m) ) * & ( surf%l_vg(k,m) + 2.0_wp) ) ) ENDIF ENDDO ENDIF ENDDO DO m = 1, surf%ns IF ( .NOT. surf%water_surface(m) .AND. calc_soil_moisture ) THEN ! !-- Prognostic equation for soil moisture content. Only performed, !-- when humidity is enabled in the atmosphere. IF ( humidity ) THEN ! !-- Calculate soil diffusivity (lambda_w) at the _layer level !-- using linear interpolation. To do: replace this with !-- ECMWF-IFS Eq. 8.81 DO k = nzb_soil, nzt_soil-1 surf%lambda_w(k,m) = ( lambda_temp(k+1) + lambda_temp(k) ) & * 0.5_wp surf%gamma_w(k,m) = ( gamma_temp(k+1) + gamma_temp(k) ) & * 0.5_wp ENDDO ! ! !-- In case of a closed bottom (= water content is conserved), !-- set hydraulic conductivity to zero to that no water will be !-- lost in the bottom layer. As gamma_w is always a positive value, !-- it cannot be set to zero in case of purely dry soil since this !-- would cause accumulation of (non-existing) water in the lowest !-- soil layer IF ( conserve_water_content .AND. & surf_m_soil%var_2d(nzt_soil,m) /= 0.0_wp ) THEN surf%gamma_w(nzt_soil,m) = 0.0_wp ELSE surf%gamma_w(nzt_soil,m) = gamma_temp(nzt_soil) ENDIF !-- The root extraction (= root_extr * qsws_veg / (rho_l !-- * l_v)) ensures the mass conservation for water. The !-- transpiration of plants equals the cumulative withdrawals by !-- the roots in the soil. The scheme takes into account the !-- availability of water in the soil layers as well as the root !-- fraction in the respective layer. Layer with moisture below !-- wilting point will not contribute, which reflects the !-- preference of plants to take water from moister layers. ! !-- Calculate the root extraction (ECMWF 7.69, the sum of !-- root_extr = 1). The energy balance solver guarantees a !-- positive transpiration, so that there is no need for an !-- additional check. m_total = 0.0_wp DO k = nzb_soil, nzt_soil IF ( surf_m_soil%var_2d(k,m) > surf%m_wilt(k,m) ) THEN m_total = m_total + surf%root_fr(k,m) & * surf_m_soil%var_2d(k,m) ENDIF ENDDO IF ( m_total > 0.0_wp ) THEN DO k = nzb_soil, nzt_soil IF ( surf_m_soil%var_2d(k,m) > surf%m_wilt(k,m) ) THEN root_extr(k) = surf%root_fr(k,m) & * surf_m_soil%var_2d(k,m) / m_total ELSE root_extr(k) = 0.0_wp ENDIF ENDDO ENDIF ! !-- Prognostic equation for soil water content m_soil_h. tend(:) = 0.0_wp tend(nzb_soil) = ( surf%lambda_w(nzb_soil,m) * ( & surf_m_soil%var_2d(nzb_soil+1,m) & - surf_m_soil%var_2d(nzb_soil,m) ) & * ddz_soil_center(nzb_soil) - surf%gamma_w(nzb_soil,m)& - ( root_extr(nzb_soil) * surf%qsws_veg(m) & + surf%qsws_soil(m) ) * drho_l_lv ) & * ddz_soil(nzb_soil) DO k = nzb_soil+1, nzt_soil-1 tend(k) = ( surf%lambda_w(k,m) * ( surf_m_soil%var_2d(k+1,m) & - surf_m_soil%var_2d(k,m) ) * ddz_soil_center(k) & - surf%gamma_w(k,m) & - surf%lambda_w(k-1,m) * ( surf_m_soil%var_2d(k,m) & - surf_m_soil%var_2d(k-1,m)) * ddz_soil_center(k-1) & + surf%gamma_w(k-1,m) - (root_extr(k) & * surf%qsws_veg(m) * drho_l_lv) & ) * ddz_soil(k) ENDDO tend(nzt_soil) = ( - surf%gamma_w(nzt_soil,m) & - surf%lambda_w(nzt_soil-1,m) & * ( surf_m_soil%var_2d(nzt_soil,m) & - surf_m_soil%var_2d(nzt_soil-1,m)) & * ddz_soil_center(nzt_soil-1) & + surf%gamma_w(nzt_soil-1,m) - ( & root_extr(nzt_soil) & * surf%qsws_veg(m) * drho_l_lv ) & ) * ddz_soil(nzt_soil) surf_m_soil_p%var_2d(nzb_soil:nzt_soil,m) = & surf_m_soil%var_2d(nzb_soil:nzt_soil,m) & + dt_3d * ( tsc(2) * tend(:) & + tsc(3) * surf_tm_soil_m%var_2d(:,m) ) ! !-- Account for dry soils (find a better solution here!) DO k = nzb_soil, nzt_soil IF ( surf_m_soil_p%var_2d(k,m) < 0.0_wp ) surf_m_soil_p%var_2d(k,m) = 0.0_wp ENDDO ! !-- Calculate m_soil tendencies for the next Runge-Kutta step IF ( timestep_scheme(1:5) == 'runge' ) THEN IF ( intermediate_timestep_count == 1 ) THEN DO k = nzb_soil, nzt_soil surf_tm_soil_m%var_2d(k,m) = tend(k) ENDDO ELSEIF ( intermediate_timestep_count < & intermediate_timestep_count_max ) THEN DO k = nzb_soil, nzt_soil surf_tm_soil_m%var_2d(k,m) = -9.5625_wp * tend(k) & + 5.3125_wp & * surf_tm_soil_m%var_2d(k,m) ENDDO ENDIF ENDIF ENDIF ENDIF ENDDO END SUBROUTINE lsm_soil_model !------------------------------------------------------------------------------! ! Description: ! ------------ !> Swapping of timelevels !------------------------------------------------------------------------------! SUBROUTINE lsm_swap_timelevel ( mod_count ) IMPLICIT NONE INTEGER, INTENT(IN) :: mod_count #if defined( __nopointer ) ! !-- Horizontal surfaces t_surface_h = t_surface_h_p t_soil_h = t_soil_h_p IF ( humidity ) THEN m_soil_h = m_soil_h_p m_liq_h = m_liq_h_p ENDIF ! !-- Vertical surfaces t_surface_v = t_surface_v_p t_soil_v = t_soil_v_p IF ( humidity ) THEN m_soil_v = m_soil_v_p m_liq_v = m_liq_v_p ENDIF #else SELECT CASE ( mod_count ) CASE ( 0 ) ! !-- Horizontal surfaces t_surface_h => t_surface_h_1; t_surface_h_p => t_surface_h_2 t_soil_h => t_soil_h_1; t_soil_h_p => t_soil_h_2 IF ( humidity ) THEN m_soil_h => m_soil_h_1; m_soil_h_p => m_soil_h_2 m_liq_h => m_liq_h_1; m_liq_h_p => m_liq_h_2 ENDIF ! !-- Vertical surfaces t_surface_v => t_surface_v_1; t_surface_v_p => t_surface_v_2 t_soil_v => t_soil_v_1; t_soil_v_p => t_soil_v_2 IF ( humidity ) THEN m_soil_v => m_soil_v_1; m_soil_v_p => m_soil_v_2 m_liq_v => m_liq_v_1; m_liq_v_p => m_liq_v_2 ENDIF CASE ( 1 ) ! !-- Horizontal surfaces t_surface_h => t_surface_h_2; t_surface_h_p => t_surface_h_1 t_soil_h => t_soil_h_2; t_soil_h_p => t_soil_h_1 IF ( humidity ) THEN m_soil_h => m_soil_h_2; m_soil_h_p => m_soil_h_1 m_liq_h => m_liq_h_2; m_liq_h_p => m_liq_h_1 ENDIF ! !-- Vertical surfaces t_surface_v => t_surface_v_2; t_surface_v_p => t_surface_v_1 t_soil_v => t_soil_v_2; t_soil_v_p => t_soil_v_1 IF ( humidity ) THEN m_soil_v => m_soil_v_2; m_soil_v_p => m_soil_v_1 m_liq_v => m_liq_v_2; m_liq_v_p => m_liq_v_1 ENDIF END SELECT #endif END SUBROUTINE lsm_swap_timelevel !------------------------------------------------------------------------------! ! ! Description: ! ------------ !> Subroutine for averaging 3D data !------------------------------------------------------------------------------! SUBROUTINE lsm_3d_data_averaging( mode, variable ) USE control_parameters USE indices USE kinds IMPLICIT NONE CHARACTER (LEN=*) :: mode !< CHARACTER (LEN=*) :: variable !< INTEGER(iwp) :: i !< INTEGER(iwp) :: j !< INTEGER(iwp) :: k !< INTEGER(iwp) :: m !< running index IF ( mode == 'allocate' ) THEN SELECT CASE ( TRIM( variable ) ) CASE ( 'c_liq*' ) IF ( .NOT. ALLOCATED( c_liq_av ) ) THEN ALLOCATE( c_liq_av(nysg:nyng,nxlg:nxrg) ) ENDIF c_liq_av = 0.0_wp CASE ( 'c_soil*' ) IF ( .NOT. ALLOCATED( c_soil_av ) ) THEN ALLOCATE( c_soil_av(nysg:nyng,nxlg:nxrg) ) ENDIF c_soil_av = 0.0_wp CASE ( 'c_veg*' ) IF ( .NOT. ALLOCATED( c_veg_av ) ) THEN ALLOCATE( c_veg_av(nysg:nyng,nxlg:nxrg) ) ENDIF c_veg_av = 0.0_wp CASE ( 'lai*' ) IF ( .NOT. ALLOCATED( lai_av ) ) THEN ALLOCATE( lai_av(nysg:nyng,nxlg:nxrg) ) ENDIF lai_av = 0.0_wp CASE ( 'm_liq*' ) IF ( .NOT. ALLOCATED( m_liq_av ) ) THEN ALLOCATE( m_liq_av(nysg:nyng,nxlg:nxrg) ) ENDIF m_liq_av = 0.0_wp CASE ( 'm_soil' ) IF ( .NOT. ALLOCATED( m_soil_av ) ) THEN ALLOCATE( m_soil_av(nzb_soil:nzt_soil,nysg:nyng,nxlg:nxrg) ) ENDIF m_soil_av = 0.0_wp CASE ( 'qsws_liq*' ) IF ( .NOT. ALLOCATED( qsws_liq_av ) ) THEN ALLOCATE( qsws_liq_av(nysg:nyng,nxlg:nxrg) ) ENDIF qsws_liq_av = 0.0_wp CASE ( 'qsws_soil*' ) IF ( .NOT. ALLOCATED( qsws_soil_av ) ) THEN ALLOCATE( qsws_soil_av(nysg:nyng,nxlg:nxrg) ) ENDIF qsws_soil_av = 0.0_wp CASE ( 'qsws_veg*' ) IF ( .NOT. ALLOCATED( qsws_veg_av ) ) THEN ALLOCATE( qsws_veg_av(nysg:nyng,nxlg:nxrg) ) ENDIF qsws_veg_av = 0.0_wp CASE ( 'r_s*' ) IF ( .NOT. ALLOCATED( r_s_av ) ) THEN ALLOCATE( r_s_av(nysg:nyng,nxlg:nxrg) ) ENDIF r_s_av = 0.0_wp CASE ( 't_soil' ) IF ( .NOT. ALLOCATED( t_soil_av ) ) THEN ALLOCATE( t_soil_av(nzb_soil:nzt_soil,nysg:nyng,nxlg:nxrg) ) ENDIF t_soil_av = 0.0_wp CASE DEFAULT CONTINUE END SELECT ELSEIF ( mode == 'sum' ) THEN SELECT CASE ( TRIM( variable ) ) CASE ( 'c_liq*' ) DO m = 1, surf_lsm_h%ns i = surf_lsm_h%i(m) j = surf_lsm_h%j(m) c_liq_av(j,i) = c_liq_av(j,i) + surf_lsm_h%c_liq(m) ENDDO CASE ( 'c_soil*' ) DO m = 1, surf_lsm_h%ns i = surf_lsm_h%i(m) j = surf_lsm_h%j(m) c_soil_av(j,i) = c_soil_av(j,i) + (1.0 - surf_lsm_h%c_veg(m)) ENDDO CASE ( 'c_veg*' ) DO m = 1, surf_lsm_h%ns i = surf_lsm_h%i(m) j = surf_lsm_h%j(m) c_veg_av(j,i) = c_veg_av(j,i) + surf_lsm_h%c_veg(m) ENDDO CASE ( 'lai*' ) DO m = 1, surf_lsm_h%ns i = surf_lsm_h%i(m) j = surf_lsm_h%j(m) lai_av(j,i) = lai_av(j,i) + surf_lsm_h%lai(m) ENDDO CASE ( 'm_liq*' ) DO m = 1, surf_lsm_h%ns i = surf_lsm_h%i(m) j = surf_lsm_h%j(m) m_liq_av(j,i) = m_liq_av(j,i) + m_liq_h%var_1d(m) ENDDO CASE ( 'm_soil' ) DO m = 1, surf_lsm_h%ns i = surf_lsm_h%i(m) j = surf_lsm_h%j(m) DO k = nzb_soil, nzt_soil m_soil_av(k,j,i) = m_soil_av(k,j,i) + m_soil_h%var_2d(k,m) ENDDO ENDDO CASE ( 'qsws_liq*' ) DO m = 1, surf_lsm_h%ns i = surf_lsm_h%i(m) j = surf_lsm_h%j(m) qsws_liq_av(j,i) = qsws_liq_av(j,i) + & surf_lsm_h%qsws_liq(m) ENDDO CASE ( 'qsws_soil*' ) DO m = 1, surf_lsm_h%ns i = surf_lsm_h%i(m) j = surf_lsm_h%j(m) qsws_soil_av(j,i) = qsws_soil_av(j,i) + & surf_lsm_h%qsws_soil(m) ENDDO CASE ( 'qsws_veg*' ) DO m = 1, surf_lsm_h%ns i = surf_lsm_h%i(m) j = surf_lsm_h%j(m) qsws_veg_av(j,i) = qsws_veg_av(j,i) + & surf_lsm_h%qsws_veg(m) ENDDO CASE ( 'r_s*' ) DO m = 1, surf_lsm_h%ns i = surf_lsm_h%i(m) j = surf_lsm_h%j(m) r_s_av(j,i) = r_s_av(j,i) + surf_lsm_h%r_s(m) ENDDO CASE ( 't_soil' ) DO m = 1, surf_lsm_h%ns i = surf_lsm_h%i(m) j = surf_lsm_h%j(m) DO k = nzb_soil, nzt_soil t_soil_av(k,j,i) = t_soil_av(k,j,i) + t_soil_h%var_2d(k,m) ENDDO ENDDO CASE DEFAULT CONTINUE END SELECT ELSEIF ( mode == 'average' ) THEN SELECT CASE ( TRIM( variable ) ) CASE ( 'c_liq*' ) DO i = nxl, nxr DO j = nys, nyn c_liq_av(j,i) = c_liq_av(j,i) & / REAL( average_count_3d, KIND=wp ) ENDDO ENDDO CASE ( 'c_soil*' ) DO i = nxl, nxr DO j = nys, nyn c_soil_av(j,i) = c_soil_av(j,i) & / REAL( average_count_3d, KIND=wp ) ENDDO ENDDO CASE ( 'c_veg*' ) DO i = nxl, nxr DO j = nys, nyn c_veg_av(j,i) = c_veg_av(j,i) & / REAL( average_count_3d, KIND=wp ) ENDDO ENDDO CASE ( 'lai*' ) DO i = nxl, nxr DO j = nys, nyn lai_av(j,i) = lai_av(j,i) & / REAL( average_count_3d, KIND=wp ) ENDDO ENDDO CASE ( 'm_liq*' ) DO i = nxl, nxr DO j = nys, nyn m_liq_av(j,i) = m_liq_av(j,i) & / REAL( average_count_3d, KIND=wp ) ENDDO ENDDO CASE ( 'm_soil' ) DO i = nxl, nxr DO j = nys, nyn DO k = nzb_soil, nzt_soil m_soil_av(k,j,i) = m_soil_av(k,j,i) & / REAL( average_count_3d, KIND=wp ) ENDDO ENDDO ENDDO CASE ( 'qsws_liq*' ) DO i = nxl, nxr DO j = nys, nyn qsws_liq_av(j,i) = qsws_liq_av(j,i) & / REAL( average_count_3d, KIND=wp ) ENDDO ENDDO CASE ( 'qsws_soil*' ) DO i = nxl, nxr DO j = nys, nyn qsws_soil_av(j,i) = qsws_soil_av(j,i) & / REAL( average_count_3d, KIND=wp ) ENDDO ENDDO CASE ( 'qsws_veg*' ) DO i = nxl, nxr DO j = nys, nyn qsws_veg_av(j,i) = qsws_veg_av(j,i) & / REAL( average_count_3d, KIND=wp ) ENDDO ENDDO CASE ( 'r_s*' ) DO i = nxl, nxr DO j = nys, nyn r_s_av(j,i) = r_s_av(j,i) / REAL( average_count_3d, KIND=wp ) ENDDO ENDDO CASE ( 't_soil' ) DO i = nxl, nxr DO j = nys, nyn DO k = nzb_soil, nzt_soil t_soil_av(k,j,i) = t_soil_av(k,j,i) & / REAL( average_count_3d, KIND=wp ) ENDDO ENDDO ENDDO ! !-- END SELECT ENDIF END SUBROUTINE lsm_3d_data_averaging !------------------------------------------------------------------------------! ! ! Description: ! ------------ !> Subroutine defining appropriate grid for netcdf variables. !> It is called out from subroutine netcdf. !------------------------------------------------------------------------------! SUBROUTINE lsm_define_netcdf_grid( var, found, grid_x, grid_y, grid_z ) IMPLICIT NONE CHARACTER (LEN=*), INTENT(IN) :: var !< LOGICAL, INTENT(OUT) :: found !< CHARACTER (LEN=*), INTENT(OUT) :: grid_x !< CHARACTER (LEN=*), INTENT(OUT) :: grid_y !< CHARACTER (LEN=*), INTENT(OUT) :: grid_z !< found = .TRUE. ! !-- Check for the grid SELECT CASE ( TRIM( var ) ) CASE ( 'm_soil', 't_soil', 'm_soil_xy', 't_soil_xy', 'm_soil_xz', & 't_soil_xz', 'm_soil_yz', 't_soil_yz' ) grid_x = 'x' grid_y = 'y' grid_z = 'zs' CASE DEFAULT found = .FALSE. grid_x = 'none' grid_y = 'none' grid_z = 'none' END SELECT END SUBROUTINE lsm_define_netcdf_grid !------------------------------------------------------------------------------! ! ! Description: ! ------------ !> Subroutine defining 3D output variables !------------------------------------------------------------------------------! SUBROUTINE lsm_data_output_2d( av, variable, found, grid, mode, local_pf, & two_d, nzb_do, nzt_do ) USE indices USE kinds IMPLICIT NONE CHARACTER (LEN=*) :: grid !< CHARACTER (LEN=*) :: mode !< CHARACTER (LEN=*) :: variable !< INTEGER(iwp) :: av !< INTEGER(iwp) :: i !< running index INTEGER(iwp) :: j !< running index INTEGER(iwp) :: k !< running index INTEGER(iwp) :: m !< running index INTEGER(iwp) :: nzb_do !< INTEGER(iwp) :: nzt_do !< LOGICAL :: found !< LOGICAL :: two_d !< flag parameter that indicates 2D variables (horizontal cross sections) REAL(wp), DIMENSION(nxl:nxr,nys:nyn,nzb:nzt+1) :: local_pf !< found = .TRUE. SELECT CASE ( TRIM( variable ) ) ! !-- Before data is transfered to local_pf, transfer is it 2D dummy variable and exchange ghost points therein. !-- However, at this point this is only required for instantaneous arrays, time-averaged quantities are already exchanged. CASE ( 'c_liq*_xy' ) ! 2d-array IF ( av == 0 ) THEN DO m = 1, surf_lsm_h%ns i = surf_lsm_h%i(m) j = surf_lsm_h%j(m) local_pf(i,j,nzb+1) = surf_lsm_h%c_liq(m) * surf_lsm_h%c_veg(m) ENDDO ELSE DO i = nxl, nxr DO j = nys, nyn local_pf(i,j,nzb+1) = c_liq_av(j,i) ENDDO ENDDO ENDIF two_d = .TRUE. grid = 'zu1' CASE ( 'c_soil*_xy' ) ! 2d-array IF ( av == 0 ) THEN DO m = 1, surf_lsm_h%ns i = surf_lsm_h%i(m) j = surf_lsm_h%j(m) local_pf(i,j,nzb+1) = 1.0_wp - surf_lsm_h%c_veg(m) ENDDO ELSE DO i = nxl, nxr DO j = nys, nyn local_pf(i,j,nzb+1) = c_soil_av(j,i) ENDDO ENDDO ENDIF two_d = .TRUE. grid = 'zu1' CASE ( 'c_veg*_xy' ) ! 2d-array IF ( av == 0 ) THEN DO m = 1, surf_lsm_h%ns i = surf_lsm_h%i(m) j = surf_lsm_h%j(m) local_pf(i,j,nzb+1) = surf_lsm_h%c_veg(m) ENDDO ELSE DO i = nxl, nxr DO j = nys, nyn local_pf(i,j,nzb+1) = c_veg_av(j,i) ENDDO ENDDO ENDIF two_d = .TRUE. grid = 'zu1' CASE ( 'lai*_xy' ) ! 2d-array IF ( av == 0 ) THEN DO m = 1, surf_lsm_h%ns i = surf_lsm_h%i(m) j = surf_lsm_h%j(m) local_pf(i,j,nzb+1) = surf_lsm_h%lai(m) ENDDO ELSE DO i = nxl, nxr DO j = nys, nyn local_pf(i,j,nzb+1) = lai_av(j,i) ENDDO ENDDO ENDIF two_d = .TRUE. grid = 'zu1' CASE ( 'm_liq*_xy' ) ! 2d-array IF ( av == 0 ) THEN DO m = 1, surf_lsm_h%ns i = surf_lsm_h%i(m) j = surf_lsm_h%j(m) local_pf(i,j,nzb+1) = m_liq_h%var_1d(m) ENDDO ELSE DO i = nxl, nxr DO j = nys, nyn local_pf(i,j,nzb+1) = m_liq_av(j,i) ENDDO ENDDO ENDIF two_d = .TRUE. grid = 'zu1' CASE ( 'm_soil_xy', 'm_soil_xz', 'm_soil_yz' ) IF ( av == 0 ) THEN DO m = 1, surf_lsm_h%ns i = surf_lsm_h%i(m) j = surf_lsm_h%j(m) DO k = nzb_soil, nzt_soil local_pf(i,j,k) = m_soil_h%var_2d(k,m) ENDDO ENDDO ELSE DO i = nxl, nxr DO j = nys, nyn DO k = nzb_soil, nzt_soil local_pf(i,j,k) = m_soil_av(k,j,i) ENDDO ENDDO ENDDO ENDIF nzb_do = nzb_soil nzt_do = nzt_soil IF ( mode == 'xy' ) grid = 'zs' CASE ( 'qsws_liq*_xy' ) ! 2d-array IF ( av == 0 ) THEN DO m = 1, surf_lsm_h%ns i = surf_lsm_h%i(m) j = surf_lsm_h%j(m) local_pf(i,j,nzb+1) = surf_lsm_h%qsws_liq(m) ENDDO ELSE DO i = nxl, nxr DO j = nys, nyn local_pf(i,j,nzb+1) = qsws_liq_av(j,i) ENDDO ENDDO ENDIF two_d = .TRUE. grid = 'zu1' CASE ( 'qsws_soil*_xy' ) ! 2d-array IF ( av == 0 ) THEN DO m = 1, surf_lsm_h%ns i = surf_lsm_h%i(m) j = surf_lsm_h%j(m) local_pf(i,j,nzb+1) = surf_lsm_h%qsws_soil(m) ENDDO ELSE DO i = nxl, nxr DO j = nys, nyn local_pf(i,j,nzb+1) = qsws_soil_av(j,i) ENDDO ENDDO ENDIF two_d = .TRUE. grid = 'zu1' CASE ( 'qsws_veg*_xy' ) ! 2d-array IF ( av == 0 ) THEN DO m = 1, surf_lsm_h%ns i = surf_lsm_h%i(m) j = surf_lsm_h%j(m) local_pf(i,j,nzb+1) = surf_lsm_h%qsws_veg(m) ENDDO ELSE DO i = nxl, nxr DO j = nys, nyn local_pf(i,j,nzb+1) = qsws_veg_av(j,i) ENDDO ENDDO ENDIF two_d = .TRUE. grid = 'zu1' CASE ( 'r_s*_xy' ) ! 2d-array IF ( av == 0 ) THEN DO m = 1, surf_lsm_h%ns i = surf_lsm_h%i(m) j = surf_lsm_h%j(m) local_pf(i,j,nzb+1) = surf_lsm_h%r_s(m) ENDDO ELSE DO i = nxl, nxr DO j = nys, nyn local_pf(i,j,nzb+1) = r_s_av(j,i) ENDDO ENDDO ENDIF two_d = .TRUE. grid = 'zu1' CASE ( 't_soil_xy', 't_soil_xz', 't_soil_yz' ) IF ( av == 0 ) THEN DO m = 1, surf_lsm_h%ns i = surf_lsm_h%i(m) j = surf_lsm_h%j(m) DO k = nzb_soil, nzt_soil local_pf(i,j,k) = t_soil_h%var_2d(k,m) ENDDO ENDDO ELSE DO i = nxl, nxr DO j = nys, nyn DO k = nzb_soil, nzt_soil local_pf(i,j,k) = t_soil_av(k,j,i) ENDDO ENDDO ENDDO ENDIF nzb_do = nzb_soil nzt_do = nzt_soil IF ( mode == 'xy' ) grid = 'zs' CASE DEFAULT found = .FALSE. grid = 'none' END SELECT END SUBROUTINE lsm_data_output_2d !------------------------------------------------------------------------------! ! ! Description: ! ------------ !> Subroutine defining 3D output variables !------------------------------------------------------------------------------! SUBROUTINE lsm_data_output_3d( av, variable, found, local_pf ) USE indices USE kinds IMPLICIT NONE CHARACTER (LEN=*) :: variable !< INTEGER(iwp) :: av !< INTEGER(iwp) :: i !< INTEGER(iwp) :: j !< INTEGER(iwp) :: k !< INTEGER(iwp) :: m !< running index LOGICAL :: found !< REAL(sp), DIMENSION(nxl:nxr,nys:nyn,nzb_soil:nzt_soil) :: local_pf !< found = .TRUE. SELECT CASE ( TRIM( variable ) ) ! !-- Requires 3D exchange CASE ( 'm_soil' ) IF ( av == 0 ) THEN DO m = 1, surf_lsm_h%ns i = surf_lsm_h%i(m) j = surf_lsm_h%j(m) DO k = nzb_soil, nzt_soil local_pf(i,j,k) = m_soil_h%var_2d(k,m) ENDDO ENDDO ELSE DO i = nxl, nxr DO j = nys, nyn DO k = nzb_soil, nzt_soil local_pf(i,j,k) = m_soil_av(k,j,i) ENDDO ENDDO ENDDO ENDIF CASE ( 't_soil' ) IF ( av == 0 ) THEN DO m = 1, surf_lsm_h%ns i = surf_lsm_h%i(m) j = surf_lsm_h%j(m) DO k = nzb_soil, nzt_soil local_pf(i,j,k) = t_soil_h%var_2d(k,m) ENDDO ENDDO ELSE DO i = nxl, nxr DO j = nys, nyn DO k = nzb_soil, nzt_soil local_pf(i,j,k) = t_soil_av(k,j,i) ENDDO ENDDO ENDDO ENDIF CASE DEFAULT found = .FALSE. END SELECT END SUBROUTINE lsm_data_output_3d !------------------------------------------------------------------------------! ! ! Description: ! ------------ !> Write restart data for land surface model !------------------------------------------------------------------------------! SUBROUTINE lsm_write_restart_data USE control_parameters USE kinds IMPLICIT NONE CHARACTER (LEN=1) :: dum !< dummy to create correct string for creating variable string INTEGER(iwp) :: l !< index variable for surface orientation IF ( write_binary ) THEN WRITE ( 14 ) 'ns_h_on_file_lsm ' WRITE ( 14 ) surf_lsm_h%ns WRITE ( 14 ) 'ns_v_on_file_lsm ' WRITE ( 14 ) surf_lsm_v(0:3)%ns IF ( ALLOCATED( c_liq_av ) ) THEN WRITE ( 14 ) 'c_liq_av '; WRITE ( 14 ) c_liq_av ENDIF IF ( ALLOCATED( c_soil_av ) ) THEN WRITE ( 14 ) 'c_soil_av '; WRITE ( 14 ) c_soil_av ENDIF IF ( ALLOCATED( c_veg_av ) ) THEN WRITE ( 14 ) 'c_veg_av '; WRITE ( 14 ) c_veg_av ENDIF IF ( ALLOCATED( lai_av ) ) THEN WRITE ( 14 ) 'lai_av '; WRITE ( 14 ) lai_av ENDIF IF ( ALLOCATED( m_liq_av ) ) THEN WRITE ( 14 ) 'm_liq_av '; WRITE ( 14 ) m_liq_av ENDIF IF ( ALLOCATED( m_soil_av ) ) THEN WRITE ( 14 ) 'm_soil_av '; WRITE ( 14 ) m_soil_av ENDIF IF ( ALLOCATED( qsws_liq_av ) ) THEN WRITE ( 14 ) 'qsws_liq_av '; WRITE ( 14 ) qsws_liq_av ENDIF IF ( ALLOCATED( qsws_soil_av ) ) THEN WRITE ( 14 ) 'qsws_soil_av '; WRITE ( 14 ) qsws_soil_av ENDIF IF ( ALLOCATED( qsws_veg_av ) ) THEN WRITE ( 14 ) 'qsws_veg_av '; WRITE ( 14 ) qsws_veg_av ENDIF IF ( ALLOCATED( t_soil_av ) ) THEN WRITE ( 14 ) 't_soil_av '; WRITE ( 14 ) t_soil_av ENDIF WRITE ( 14 ) 'lsm_start_index_h ' WRITE ( 14 ) surf_lsm_h%start_index WRITE ( 14 ) 'lsm_end_index_h ' WRITE ( 14 ) surf_lsm_h%end_index WRITE ( 14 ) 't_soil_h ' WRITE ( 14 ) t_soil_h%var_2d DO l = 0, 3 WRITE ( 14 ) 'lsm_start_index_v ' WRITE ( 14 ) surf_lsm_v(l)%start_index WRITE ( 14 ) 'lsm_end_index_v ' WRITE ( 14 ) surf_lsm_v(l)%end_index WRITE( dum, '(I1)') l WRITE ( 14 ) 't_soil_v(' // dum // ') ' WRITE ( 14 ) t_soil_v(l)%var_2d ENDDO WRITE ( 14 ) 'lsm_start_index_h ' WRITE ( 14 ) surf_lsm_h%start_index WRITE ( 14 ) 'lsm_end_index_h ' WRITE ( 14 ) surf_lsm_h%end_index WRITE ( 14 ) 'm_soil_h ' WRITE ( 14 ) m_soil_h%var_2d DO l = 0, 3 WRITE ( 14 ) 'lsm_start_index_v ' WRITE ( 14 ) surf_lsm_v(l)%start_index WRITE ( 14 ) 'lsm_end_index_v ' WRITE ( 14 ) surf_lsm_v(l)%end_index WRITE( dum, '(I1)') l WRITE ( 14 ) 'm_soil_v(' // dum // ') ' WRITE ( 14 ) m_soil_v(l)%var_2d ENDDO WRITE ( 14 ) 'lsm_start_index_h ' WRITE ( 14 ) surf_lsm_h%start_index WRITE ( 14 ) 'lsm_end_index_h ' WRITE ( 14 ) surf_lsm_h%end_index WRITE ( 14 ) 'm_liq_h ' WRITE ( 14 ) m_liq_h%var_1d DO l = 0, 3 WRITE ( 14 ) 'lsm_start_index_v ' WRITE ( 14 ) surf_lsm_v(l)%start_index WRITE ( 14 ) 'lsm_end_index_v ' WRITE ( 14 ) surf_lsm_v(l)%end_index WRITE( dum, '(I1)') l WRITE ( 14 ) 'm_liq_v(' // dum // ') ' WRITE ( 14 ) m_liq_v(l)%var_1d ENDDO WRITE ( 14 ) 'lsm_start_index_h ' WRITE ( 14 ) surf_lsm_h%start_index WRITE ( 14 ) 'lsm_end_index_h ' WRITE ( 14 ) surf_lsm_h%end_index WRITE ( 14 ) 't_surface_h ' WRITE ( 14 ) t_surface_h%var_1d DO l = 0, 3 WRITE ( 14 ) 'lsm_start_index_v ' WRITE ( 14 ) surf_lsm_v(l)%start_index WRITE ( 14 ) 'lsm_end_index_v ' WRITE ( 14 ) surf_lsm_v(l)%end_index WRITE( dum, '(I1)') l WRITE ( 14 ) 't_surface_v(' // dum // ') ' WRITE ( 14 ) t_surface_v(l)%var_1d ENDDO WRITE ( 14 ) '*** end lsm *** ' ENDIF END SUBROUTINE lsm_write_restart_data SUBROUTINE lsm_read_restart_data( i, nxlfa, nxl_on_file, nxrfa, nxr_on_file, & nynfa, nyn_on_file, nysfa, nys_on_file, & offset_xa, offset_ya, overlap_count, & tmp_2d ) USE control_parameters USE indices USE kinds USE pegrid IMPLICIT NONE CHARACTER (LEN=20) :: field_char !< INTEGER(iwp) :: i !< INTEGER(iwp) :: k !< INTEGER(iwp) :: l !< running index surface orientation INTEGER(iwp) :: ns_h_on_file_lsm !< number of horizontal surface elements (natural type) on file INTEGER(iwp) :: nxlc !< INTEGER(iwp) :: nxlf !< INTEGER(iwp) :: nxl_on_file !< INTEGER(iwp) :: nxrc !< INTEGER(iwp) :: nxrf !< INTEGER(iwp) :: nxr_on_file !< INTEGER(iwp) :: nync !< INTEGER(iwp) :: nynf !< INTEGER(iwp) :: nyn_on_file !< INTEGER(iwp) :: nysc !< INTEGER(iwp) :: nysf !< INTEGER(iwp) :: nys_on_file !< INTEGER(iwp) :: overlap_count !< INTEGER(iwp) :: ns_v_on_file_lsm(0:3) !< number of vertical surface elements (natural type) on file INTEGER(iwp), DIMENSION(numprocs_previous_run,1000) :: nxlfa !< INTEGER(iwp), DIMENSION(numprocs_previous_run,1000) :: nxrfa !< INTEGER(iwp), DIMENSION(numprocs_previous_run,1000) :: nynfa !< INTEGER(iwp), DIMENSION(numprocs_previous_run,1000) :: nysfa !< INTEGER(iwp), DIMENSION(numprocs_previous_run,1000) :: offset_xa !< INTEGER(iwp), DIMENSION(numprocs_previous_run,1000) :: offset_ya !< INTEGER(iwp), DIMENSION(nys_on_file:nyn_on_file,nxl_on_file:nxr_on_file) :: start_index_on_file INTEGER(iwp), DIMENSION(nys_on_file:nyn_on_file,nxl_on_file:nxr_on_file) :: end_index_on_file REAL(wp), & DIMENSION(nys_on_file-nbgp:nyn_on_file+nbgp,nxl_on_file-nbgp:nxr_on_file+nbgp) :: & tmp_2d !< REAL(wp), & DIMENSION(nzb_soil:nzt_soil+1,nys_on_file-nbgp:nyn_on_file+nbgp,nxl_on_file-nbgp:nxr_on_file+nbgp) :: & tmp_3d !< REAL(wp), & DIMENSION(nzb_soil:nzt_soil,nys_on_file-nbgp:nyn_on_file+nbgp,nxl_on_file-nbgp:nxr_on_file+nbgp) :: & tmp_3d2 !< TYPE(surf_type_lsm) :: tmp_walltype_h_1d !< temporary 1D array containing the respective surface variable stored on file, horizontal surfaces TYPE(surf_type_lsm) :: tmp_walltype_h_2d !< temporary 2D array containing the respective surface variable stored on file, horizontal surfaces TYPE(surf_type_lsm) :: tmp_walltype_h_2d2 !< temporary 2D array containing the respective surface variable stored on file, horizontal surfaces TYPE(surf_type_lsm), DIMENSION(0:3) :: tmp_walltype_v_1d !< temporary 1D array containing the respective surface variable stored on file, vertical surfaces TYPE(surf_type_lsm), DIMENSION(0:3) :: tmp_walltype_v_2d !< temporary 2D array containing the respective surface variable stored on file, vertical surfaces TYPE(surf_type_lsm), DIMENSION(0:3) :: tmp_walltype_v_2d2 !< temporary 2D array containing the respective surface variable stored on file, vertical surfaces IF ( initializing_actions == 'read_restart_data' ) THEN READ ( 13 ) field_char ! !-- At first, determine the number of surface elements (with certain orientation) on file IF ( TRIM( field_char ) /= 'ns_h_on_file_lsm' ) THEN ! !-- Add a proper error message ENDIF READ ( 13 ) ns_h_on_file_lsm READ ( 13 ) field_char IF ( TRIM( field_char ) /= 'ns_v_on_file_lsm' ) THEN ! !-- Add a proper error message ENDIF READ ( 13 ) ns_v_on_file_lsm ! !-- Allocate temporary arrays to store surface data ALLOCATE( tmp_walltype_h_1d%var_1d(1:ns_h_on_file_lsm) ) ALLOCATE( tmp_walltype_h_2d%var_2d(nzb_soil:nzt_soil+1,1:ns_h_on_file_lsm) ) ALLOCATE( tmp_walltype_h_2d2%var_2d(nzb_soil:nzt_soil,1:ns_h_on_file_lsm) ) DO l = 0, 3 ALLOCATE( tmp_walltype_v_1d(l)%var_1d(1:ns_v_on_file_lsm(l)) ) ALLOCATE( tmp_walltype_v_2d(l)%var_2d(nzb_soil:nzt_soil+1,1:ns_v_on_file_lsm(l)) ) ALLOCATE( tmp_walltype_v_2d2(l)%var_2d(nzb_soil:nzt_soil,1:ns_v_on_file_lsm(l)) ) ENDDO READ ( 13 ) field_char DO WHILE ( TRIM( field_char ) /= '*** end lsm ***' ) DO k = 1, overlap_count nxlf = nxlfa(i,k) nxlc = nxlfa(i,k) + offset_xa(i,k) nxrf = nxrfa(i,k) nxrc = nxrfa(i,k) + offset_xa(i,k) nysf = nysfa(i,k) nysc = nysfa(i,k) + offset_ya(i,k) nynf = nynfa(i,k) nync = nynfa(i,k) + offset_ya(i,k) SELECT CASE ( TRIM( field_char ) ) CASE ( 'c_liq_av' ) IF ( .NOT. ALLOCATED( c_liq_av ) ) THEN ALLOCATE( c_liq_av(nysg:nyng,nxlg:nxrg) ) ENDIF IF ( k == 1 ) READ ( 13 ) tmp_2d c_liq_av(nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = & tmp_2d(nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp) CASE ( 'c_soil_av' ) IF ( .NOT. ALLOCATED( c_soil_av ) ) THEN ALLOCATE( c_soil_av(nysg:nyng,nxlg:nxrg) ) ENDIF IF ( k == 1 ) READ ( 13 ) tmp_2d c_soil_av(nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = & tmp_2d(nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp) CASE ( 'c_veg_av' ) IF ( .NOT. ALLOCATED( c_veg_av ) ) THEN ALLOCATE( c_veg_av(nysg:nyng,nxlg:nxrg) ) ENDIF IF ( k == 1 ) READ ( 13 ) tmp_2d c_veg_av(nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = & tmp_2d(nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp) CASE ( 'lai_av' ) IF ( .NOT. ALLOCATED( lai_av ) ) THEN ALLOCATE( lai_av(nysg:nyng,nxlg:nxrg) ) ENDIF IF ( k == 1 ) READ ( 13 ) tmp_2d lai_av(nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = & tmp_2d(nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp) CASE ( 'm_liq_av' ) IF ( .NOT. ALLOCATED( m_liq_av ) ) THEN ALLOCATE( m_liq_av(nysg:nyng,nxlg:nxrg) ) ENDIF IF ( k == 1 ) READ ( 13 ) tmp_2d m_liq_av(nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = & tmp_2d(nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp) CASE ( 'm_soil_av' ) IF ( .NOT. ALLOCATED( m_soil_av ) ) THEN ALLOCATE( m_soil_av(nzb_soil:nzt_soil,nysg:nyng,nxlg:nxrg) ) ENDIF IF ( k == 1 ) READ ( 13 ) tmp_3d2(:,:,:) m_soil_av(:,nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = & tmp_3d2(nzb_soil:nzt_soil,nysf & -nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp) CASE ( 'qsws_liq_av' ) IF ( .NOT. ALLOCATED( qsws_liq_av ) ) THEN ALLOCATE( qsws_liq_av(nysg:nyng,nxlg:nxrg) ) ENDIF IF ( k == 1 ) READ ( 13 ) tmp_2d qsws_liq_av(nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = & tmp_2d(nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp) CASE ( 'qsws_soil_av' ) IF ( .NOT. ALLOCATED( qsws_soil_av ) ) THEN ALLOCATE( qsws_soil_av(nysg:nyng,nxlg:nxrg) ) ENDIF IF ( k == 1 ) READ ( 13 ) tmp_2d qsws_soil_av(nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = & tmp_2d(nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp) CASE ( 'qsws_veg_av' ) IF ( .NOT. ALLOCATED( qsws_veg_av ) ) THEN ALLOCATE( qsws_veg_av(nysg:nyng,nxlg:nxrg) ) ENDIF IF ( k == 1 ) READ ( 13 ) tmp_2d qsws_veg_av(nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = & tmp_2d(nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp) CASE ( 't_soil_av' ) IF ( .NOT. ALLOCATED( t_soil_av ) ) THEN ALLOCATE( t_soil_av(nzb_soil:nzt_soil,nysg:nyng,nxlg:nxrg) ) ENDIF IF ( k == 1 ) READ ( 13 ) tmp_3d2(:,:,:) t_soil_av(:,nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = & tmp_3d2(:,nysf-nbgp:nynf+nbgp, & nxlf-nbgp:nxrf+nbgp) CASE ( 'lsm_start_index_h', 'lsm_start_index_v' ) IF ( k == 1 ) & READ ( 13 ) start_index_on_file CASE ( 'lsm_end_index_h', 'lsm_end_index_v' ) IF ( k == 1 ) & READ ( 13 ) end_index_on_file CASE ( 't_soil_h' ) IF ( k == 1 ) THEN IF ( .NOT. ALLOCATED( t_soil_h%var_2d ) ) & ALLOCATE( t_soil_h%var_2d(nzb_soil:nzt_soil+1,1:surf_lsm_h%ns) ) READ ( 13 ) tmp_walltype_h_2d%var_2d ENDIF CALL surface_restore_elements( & t_soil_h%var_2d, & tmp_walltype_h_2d%var_2d, & surf_lsm_h%start_index, & start_index_on_file, & end_index_on_file, & nxlc, nysc, & nxlf, nxrf, nysf, nynf, & nys_on_file, nyn_on_file, & nxl_on_file,nxr_on_file ) CASE ( 't_soil_v(0)' ) IF ( k == 1 ) THEN IF ( .NOT. ALLOCATED( t_soil_v(0)%var_2d ) ) & ALLOCATE( t_soil_v(0)%var_2d(nzb_soil:nzt_soil+1,1:surf_lsm_v(0)%ns) ) READ ( 13 ) tmp_walltype_v_2d(0)%var_2d ENDIF CALL surface_restore_elements( & t_soil_v(0)%var_2d, & tmp_walltype_v_2d(0)%var_2d, & surf_lsm_v(0)%start_index, & start_index_on_file, & end_index_on_file, & nxlc, nysc, & nxlf, nxrf, nysf, nynf, & nys_on_file, nyn_on_file, & nxl_on_file,nxr_on_file ) CASE ( 't_soil_v(1)' ) IF ( k == 1 ) THEN IF ( .NOT. ALLOCATED( t_soil_v(1)%var_2d ) ) & ALLOCATE( t_soil_v(1)%var_2d(nzb_soil:nzt_soil+1,1:surf_lsm_v(1)%ns) ) READ ( 13 ) tmp_walltype_v_2d(1)%var_2d ENDIF CALL surface_restore_elements( & t_soil_v(1)%var_2d, & tmp_walltype_v_2d(1)%var_2d, & surf_lsm_v(1)%start_index, & start_index_on_file, & end_index_on_file, & nxlc, nysc, & nxlf, nxrf, nysf, nynf, & nys_on_file, nyn_on_file, & nxl_on_file,nxr_on_file ) CASE ( 't_soil_v(2)' ) IF ( k == 1 ) THEN IF ( .NOT. ALLOCATED( t_soil_v(2)%var_2d ) ) & ALLOCATE( t_soil_v(2)%var_2d(nzb_soil:nzt_soil+1,1:surf_lsm_v(2)%ns) ) READ ( 13 ) tmp_walltype_v_2d(2)%var_2d ENDIF CALL surface_restore_elements( & t_soil_v(2)%var_2d, & tmp_walltype_v_2d(2)%var_2d, & surf_lsm_v(2)%start_index, & start_index_on_file, & end_index_on_file, & nxlc, nysc, & nxlf, nxrf, nysf, nynf, & nys_on_file, nyn_on_file, & nxl_on_file,nxr_on_file ) CASE ( 't_soil_v(3)' ) IF ( k == 1 ) THEN IF ( .NOT. ALLOCATED( t_soil_v(3)%var_2d ) ) & ALLOCATE( t_soil_v(1)%var_2d(nzb_soil:nzt_soil+1,1:surf_lsm_v(3)%ns) ) READ ( 13 ) tmp_walltype_v_2d(3)%var_2d ENDIF CALL surface_restore_elements( & t_soil_v(3)%var_2d, & tmp_walltype_v_2d(3)%var_2d, & surf_lsm_v(3)%start_index, & start_index_on_file, & end_index_on_file, & nxlc, nysc, & nxlf, nxrf, nysf, nynf, & nys_on_file, nyn_on_file, & nxl_on_file,nxr_on_file ) CASE ( 'm_soil_h' ) IF ( k == 1 ) THEN IF ( .NOT. ALLOCATED( m_soil_h%var_2d ) ) & ALLOCATE( m_soil_h%var_2d(nzb_soil:nzt_soil+1,1:surf_lsm_h%ns) ) READ ( 13 ) tmp_walltype_h_2d2%var_2d ENDIF CALL surface_restore_elements( & m_soil_h%var_2d, & tmp_walltype_h_2d2%var_2d, & surf_lsm_h%start_index, & start_index_on_file, & end_index_on_file, & nxlc, nysc, & nxlf, nxrf, nysf, nynf, & nys_on_file, nyn_on_file, & nxl_on_file,nxr_on_file ) CASE ( 'm_soil_v(0)' ) IF ( k == 1 ) THEN IF ( .NOT. ALLOCATED( m_soil_v(0)%var_2d ) ) & ALLOCATE( m_soil_v(0)%var_2d(nzb_soil:nzt_soil+1,1:surf_lsm_v(0)%ns) ) READ ( 13 ) tmp_walltype_v_2d2(0)%var_2d ENDIF CALL surface_restore_elements( & m_soil_v(0)%var_2d, & tmp_walltype_v_2d2(0)%var_2d, & surf_lsm_v(0)%start_index, & start_index_on_file, & end_index_on_file, & nxlc, nysc, & nxlf, nxrf, nysf, nynf, & nys_on_file, nyn_on_file, & nxl_on_file,nxr_on_file ) CASE ( 'm_soil_v(1)' ) IF ( k == 1 ) THEN IF ( .NOT. ALLOCATED( m_soil_v(1)%var_2d ) ) & ALLOCATE( m_soil_v(1)%var_2d(nzb_soil:nzt_soil+1,1:surf_lsm_v(1)%ns) ) READ ( 13 ) tmp_walltype_v_2d2(1)%var_2d ENDIF CALL surface_restore_elements( & m_soil_v(1)%var_2d, & tmp_walltype_v_2d2(1)%var_2d, & surf_lsm_v(1)%start_index, & start_index_on_file, & end_index_on_file, & nxlc, nysc, & nxlf, nxrf, nysf, nynf, & nys_on_file, nyn_on_file, & nxl_on_file,nxr_on_file ) CASE ( 'm_soil_v(2)' ) IF ( k == 1 ) THEN IF ( .NOT. ALLOCATED( m_soil_v(2)%var_2d ) ) & ALLOCATE( m_soil_v(2)%var_2d(nzb_soil:nzt_soil+1,1:surf_lsm_v(2)%ns) ) READ ( 13 ) tmp_walltype_v_2d2(2)%var_2d ENDIF CALL surface_restore_elements( & m_soil_v(2)%var_2d, & tmp_walltype_v_2d2(2)%var_2d, & surf_lsm_v(2)%start_index, & start_index_on_file, & end_index_on_file, & nxlc, nysc, & nxlf, nxrf, nysf, nynf, & nys_on_file, nyn_on_file, & nxl_on_file,nxr_on_file ) CASE ( 'm_soil_v(3)' ) IF ( k == 1 ) THEN IF ( .NOT. ALLOCATED( m_soil_v(3)%var_2d ) ) & ALLOCATE( m_soil_v(1)%var_2d(nzb_soil:nzt_soil+1,1:surf_lsm_v(3)%ns) ) READ ( 13 ) tmp_walltype_v_2d2(3)%var_2d ENDIF CALL surface_restore_elements( & m_soil_v(3)%var_2d, & tmp_walltype_v_2d2(3)%var_2d, & surf_lsm_v(3)%start_index, & start_index_on_file, & end_index_on_file, & nxlc, nysc, & nxlf, nxrf, nysf, nynf, & nys_on_file, nyn_on_file, & nxl_on_file,nxr_on_file ) CASE ( 'm_liq_h' ) IF ( k == 1 ) THEN IF ( .NOT. ALLOCATED( m_liq_h%var_1d ) ) & ALLOCATE( m_liq_h%var_1d(1:surf_lsm_h%ns) ) READ ( 13 ) tmp_walltype_h_1d%var_1d ENDIF CALL surface_restore_elements( & m_liq_h%var_1d, & tmp_walltype_h_1d%var_1d, & surf_lsm_h%start_index, & start_index_on_file, & end_index_on_file, & nxlc, nysc, & nxlf, nxrf, nysf, nynf, & nys_on_file, nyn_on_file, & nxl_on_file,nxr_on_file ) CASE ( 'm_liq_v(0)' ) IF ( k == 1 ) THEN IF ( .NOT. ALLOCATED( m_liq_v(0)%var_1d ) ) & ALLOCATE( m_liq_v(0)%var_1d(1:surf_lsm_v(0)%ns) ) READ ( 13 ) tmp_walltype_v_1d(0)%var_1d ENDIF CALL surface_restore_elements( & m_liq_v(0)%var_1d, & tmp_walltype_v_1d(0)%var_1d, & surf_lsm_v(0)%start_index, & start_index_on_file, & end_index_on_file, & nxlc, nysc, & nxlf, nxrf, nysf, nynf, & nys_on_file, nyn_on_file, & nxl_on_file,nxr_on_file ) CASE ( 'm_liq_v(1)' ) IF ( k == 1 ) THEN IF ( .NOT. ALLOCATED( m_liq_v(1)%var_1d ) ) & ALLOCATE( m_liq_v(1)%var_1d(1:surf_lsm_v(1)%ns) ) READ ( 13 ) tmp_walltype_v_1d(1)%var_1d ENDIF CALL surface_restore_elements( & m_liq_v(1)%var_1d, & tmp_walltype_v_1d(1)%var_1d, & surf_lsm_v(1)%start_index, & start_index_on_file, & end_index_on_file, & nxlc, nysc, & nxlf, nxrf, nysf, nynf, & nys_on_file, nyn_on_file, & nxl_on_file,nxr_on_file ) CASE ( 'm_liq_v(2)' ) IF ( k == 1 ) THEN IF ( .NOT. ALLOCATED( m_liq_v(2)%var_1d ) ) & ALLOCATE( m_liq_v(2)%var_1d(1:surf_lsm_v(2)%ns) ) READ ( 13 ) tmp_walltype_v_1d(2)%var_1d ENDIF CALL surface_restore_elements( & m_liq_v(2)%var_1d, & tmp_walltype_v_1d(2)%var_1d, & surf_lsm_v(2)%start_index, & start_index_on_file, & end_index_on_file, & nxlc, nysc, & nxlf, nxrf, nysf, nynf, & nys_on_file, nyn_on_file, & nxl_on_file,nxr_on_file ) CASE ( 'm_liq_v(3)' ) IF ( k == 1 ) THEN IF ( .NOT. ALLOCATED( m_liq_v(3)%var_1d ) ) & ALLOCATE( m_liq_v(3)%var_1d(1:surf_lsm_v(3)%ns) ) READ ( 13 ) tmp_walltype_v_1d(3)%var_1d ENDIF CALL surface_restore_elements( & m_liq_v(3)%var_1d, & tmp_walltype_v_1d(3)%var_1d, & surf_lsm_v(3)%start_index, & start_index_on_file, & end_index_on_file, & nxlc, nysc, & nxlf, nxrf, nysf, nynf, & nys_on_file, nyn_on_file, & nxl_on_file,nxr_on_file ) CASE ( 't_surface_h' ) IF ( k == 1 ) THEN IF ( .NOT. ALLOCATED( t_surface_h%var_1d ) ) & ALLOCATE( t_surface_h%var_1d(1:surf_lsm_h%ns) ) READ ( 13 ) tmp_walltype_h_1d%var_1d ENDIF CALL surface_restore_elements( & t_surface_h%var_1d, & tmp_walltype_h_1d%var_1d, & surf_lsm_h%start_index, & start_index_on_file, & end_index_on_file, & nxlc, nysc, & nxlf, nxrf, nysf, nynf, & nys_on_file, nyn_on_file, & nxl_on_file,nxr_on_file ) CASE ( 't_surface_v(0)' ) IF ( k == 1 ) THEN IF ( .NOT. ALLOCATED( t_surface_v(0)%var_1d ) ) & ALLOCATE( t_surface_v(0)%var_1d(1:surf_lsm_v(0)%ns) ) READ ( 13 ) tmp_walltype_v_1d(0)%var_1d ENDIF CALL surface_restore_elements( & t_surface_v(0)%var_1d, & tmp_walltype_v_1d(0)%var_1d, & surf_lsm_v(0)%start_index, & start_index_on_file, & end_index_on_file, & nxlc, nysc, & nxlf, nxrf, nysf, nynf, & nys_on_file, nyn_on_file, & nxl_on_file,nxr_on_file ) CASE ( 't_surface_v(1)' ) IF ( k == 1 ) THEN IF ( .NOT. ALLOCATED( t_surface_v(1)%var_1d ) ) & ALLOCATE( t_surface_v(1)%var_1d(1:surf_lsm_v(1)%ns) ) READ ( 13 ) tmp_walltype_v_1d(1)%var_1d ENDIF CALL surface_restore_elements( & t_surface_v(1)%var_1d, & tmp_walltype_v_1d(1)%var_1d, & surf_lsm_v(1)%start_index, & start_index_on_file, & end_index_on_file, & nxlc, nysc, & nxlf, nxrf, nysf, nynf, & nys_on_file, nyn_on_file, & nxl_on_file,nxr_on_file ) CASE ( 't_surface_v(2)' ) IF ( k == 1 ) THEN IF ( .NOT. ALLOCATED( t_surface_v(2)%var_1d ) ) & ALLOCATE( t_surface_v(2)%var_1d(1:surf_lsm_v(2)%ns) ) READ ( 13 ) tmp_walltype_v_1d(2)%var_1d ENDIF CALL surface_restore_elements( & t_surface_v(2)%var_1d, & tmp_walltype_v_1d(2)%var_1d, & surf_lsm_v(2)%start_index, & start_index_on_file, & end_index_on_file, & nxlc, nysc, & nxlf, nxrf, nysf, nynf, & nys_on_file, nyn_on_file, & nxl_on_file,nxr_on_file ) CASE ( 't_surface_v(3)' ) IF ( k == 1 ) THEN IF ( .NOT. ALLOCATED( t_surface_v(3)%var_1d ) ) & ALLOCATE( t_surface_v(3)%var_1d(1:surf_lsm_v(3)%ns) ) READ ( 13 ) tmp_walltype_v_1d(3)%var_1d ENDIF CALL surface_restore_elements( & t_surface_v(3)%var_1d, & tmp_walltype_v_1d(3)%var_1d, & surf_lsm_v(3)%start_index, & start_index_on_file, & end_index_on_file, & nxlc, nysc, & nxlf, nxrf, nysf, nynf, & nys_on_file, nyn_on_file, & nxl_on_file,nxr_on_file ) CASE DEFAULT WRITE( message_string, * ) 'unknown variable named "', & TRIM( field_char ), '" found in', & '&data from prior run on PE ', myid CALL message( 'lsm_read_restart_data', 'PA0302', 1, 2, 0, 6, & 0 ) END SELECT ENDDO READ ( 13 ) field_char ENDDO ENDIF END SUBROUTINE lsm_read_restart_data !------------------------------------------------------------------------------! ! Description: ! ------------ !> Calculation of roughness length for open water (lakes, ocean). The !> parameterization follows Charnock (1955). Two different implementations !> are available: as in ECMWF-IFS (Beljaars 1994) or as in FLake (Subin et al. !> 2012) !------------------------------------------------------------------------------! SUBROUTINE calc_z0_water_surface USE control_parameters, & ONLY: g, kappa, molecular_viscosity IMPLICIT NONE INTEGER(iwp) :: i !< running index INTEGER(iwp) :: j !< running index INTEGER(iwp) :: m !< running index REAL(wp), PARAMETER :: alpha_ch = 0.018_wp !< Charnock constant (0.01-0.11). Use 0.01 for FLake and 0.018 for ECMWF ! REAL(wp), PARAMETER :: pr_number = 0.71_wp !< molecular Prandtl number in the Charnock parameterization (differs from prandtl_number) ! REAL(wp), PARAMETER :: sc_number = 0.66_wp !< molecular Schmidt number in the Charnock parameterization ! REAL(wp) :: re_0 !< near-surface roughness Reynolds number DO m = 1, surf_lsm_h%ns i = surf_lsm_h%i(m) j = surf_lsm_h%j(m) IF ( surf_lsm_h%water_surface(m) ) THEN ! !-- Disabled: FLake parameterization. Ideally, the Charnock !-- coefficient should depend on the water depth and the fetch !-- length ! re_0 = z0(j,i) * us(j,i) / molecular_viscosity ! ! z0(j,i) = MAX( 0.1_wp * molecular_viscosity / us(j,i), & ! alpha_ch * us(j,i) / g ) ! ! z0h(j,i) = z0(j,i) * EXP( - kappa / pr_number * ( 4.0_wp * SQRT( re_0 ) - 3.2_wp ) ) ! z0q(j,i) = z0(j,i) * EXP( - kappa / pr_number * ( 4.0_wp * SQRT( re_0 ) - 4.2_wp ) ) ! !-- Set minimum roughness length for u* > 0.2 ! IF ( us(j,i) > 0.2_wp ) THEN ! z0h(j,i) = MAX( 1.0E-5_wp, z0h(j,i) ) ! z0q(j,i) = MAX( 1.0E-5_wp, z0q(j,i) ) ! ENDIF ! !-- ECMWF IFS model parameterization after Beljaars (1994). At low !-- wind speed, the sea surface becomes aerodynamically smooth and !-- the roughness scales with the viscosity. At high wind speed, the !-- Charnock relation is used. surf_lsm_h%z0(m) = ( 0.11_wp * molecular_viscosity / & surf_lsm_h%us(m) ) & + ( alpha_ch * surf_lsm_h%us(m)**2 / g ) surf_lsm_h%z0h(m) = 0.40_wp * molecular_viscosity / & surf_lsm_h%us(m) surf_lsm_h%z0q(m) = 0.62_wp * molecular_viscosity / & surf_lsm_h%us(m) ENDIF ENDDO END SUBROUTINE calc_z0_water_surface END MODULE land_surface_model_mod