source: palm/trunk/SOURCE/init_pegrid.f90 @ 3198

Last change on this file since 3198 was 3183, checked in by suehring, 6 years ago

last commit documented

  • Property svn:keywords set to Id
File size: 51.5 KB
Line 
1!> @file init_pegrid.f90
2!------------------------------------------------------------------------------!
3! This file is part of the PALM model system.
4!
5! PALM is free software: you can redistribute it and/or modify it under the
6! terms of the GNU General Public License as published by the Free Software
7! Foundation, either version 3 of the License, or (at your option) any later
8! version.
9!
10! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12! A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
13!
14! You should have received a copy of the GNU General Public License along with
15! PALM. If not, see <http://www.gnu.org/licenses/>.
16!
17! Copyright 1997-2018 Leibniz Universitaet Hannover
18!------------------------------------------------------------------------------!
19!
20! Current revisions:
21! ------------------
22!
23!
24! Former revisions:
25! -----------------
26! $Id: init_pegrid.f90 3183 2018-07-27 14:25:55Z sward $
27! Rename variables and boundary conditions in mesoscale-offline nesting mode
28!
29! 3182 2018-07-27 13:36:03Z suehring
30! bugfix: wrong error number in r3057 revised
31!
32! 3057 2018-06-05 09:03:41Z raasch
33! bugfix: check that nz is even in case that optimized multigrid is used
34!
35! 3049 2018-05-29 13:52:36Z Giersch
36! Error messages revised
37!
38! 3045 2018-05-28 07:55:41Z Giersch
39! Error messages revised
40!
41! 2938 2018-03-27 15:52:42Z suehring
42! - No checks for domain decomposition in case of turbulence generator
43!  (is done in stg module)
44! - Introduce ids to indicate lateral processors for turbulence generator
45!
46! 2936 2018-03-27 14:49:27Z suehring
47! Variable use_synthetic_turbulence_generator has been abbreviated
48!
49! 2718 2018-01-02 08:49:38Z maronga
50! Corrected "Former revisions" section
51!
52! 2696 2017-12-14 17:12:51Z kanani
53! Change in file header (GPL part)
54! 3D-Integer exchange on multigrid level (MS)
55! Forcing implemented (MS)
56!
57! 2600 2017-11-01 14:11:20Z raasch
58! calculation of block-I/O quantitites removed (is now done in parin)
59!
60! 2516 2017-10-04 11:03:04Z suehring
61! Remove tabs
62!
63! 2514 2017-10-04 09:52:37Z suehring
64! Redundant preprocessor directives removed
65!
66! 2372 2017-08-25 12:37:32Z sward
67! Shifted cyclic boundary conditions implemented
68!
69! 2365 2017-08-21 14:59:59Z kanani
70! Vertical nesting implemented (SadiqHuq)
71!
72! 2300 2017-06-29 13:31:14Z raasch
73! host-specific settings removed
74!
75! 2298 2017-06-29 09:28:18Z raasch
76! MPI2 related parts removed
77!
78! 2271 2017-06-09 12:34:55Z sward
79! Error message changed
80!
81! 2259 2017-06-08 09:09:11Z gronemeier
82! Implemented synthetic turbulence generator
83!
84! 2238 2017-05-31 16:49:16Z suehring
85! Remove unnecessary module load of pmc_interface
86!
87! 2231 2017-05-30 16:44:33Z suehring
88!
89! 2200 2017-04-11 11:37:51Z suehring
90! monotonic_adjustment removed
91!
92! 2197 2017-03-24 02:25:00Z raasch
93! bugfix: do not allow odd values for nz at the coarsest grid level in case of
94! optimized multigrid solver
95!
96! 2180 2017-03-17 13:33:05Z hellstea
97! Checks to ensure (2178) that pdims match the grid dimensions in the
98! automatic determination of pdims are canceled as unnecessary
99!
100! 2178 2017-03-17 11:07:39Z hellstea
101! Checks to ensure that pdims match the grid dimensions are added in the
102! automatic determination of pdims
103!
104! 2050 2016-11-08 15:00:55Z gronemeier
105! Implement turbulent outflow condition
106!
107! 2000 2016-08-20 18:09:15Z knoop
108! Forced header and separation lines into 80 columns
109!
110! 1968 2016-07-18 12:01:49Z suehring
111! Extent MPI-datatypes for exchange of 2D-INTEGER arrays on coarser multigrid
112! level 
113!
114! 1964 2016-07-14 15:35:18Z hellstea
115! Bugfix: erroneous setting of nest_bound_l/r/s/n = .TRUE. for vertical nesting mode removed.
116!
117! 1923 2016-05-31 16:37:07Z boeske
118! Initial version of purely vertical nesting introduced.
119!
120! 1922 2016-05-31 16:36:08Z boeske
121! Bugfix: array transposition checks restricted to cases if a fourier
122! transform is used , removed unused variable nnx_z
123!
124! 1833 2016-04-07 14:23:03Z raasch
125! spectra related variables moved to spectra_mod
126!
127! 1815 2016-04-06 13:49:59Z raasch
128! cpp-directives for intel openmp bug removed
129!
130! 1804 2016-04-05 16:30:18Z maronga
131! Removed code for parameter file check (__check)
132!
133! 1779 2016-03-03 08:01:28Z raasch
134! changes regarding nested domain removed: virtual PE grid will be automatically
135! calculated for nested runs too
136!
137! 1764 2016-02-28 12:45:19Z raasch
138! cpp-statements for nesting removed
139!
140! 1762 2016-02-25 12:31:13Z hellstea
141! Introduction of nested domain feature
142!
143! 1682 2015-10-07 23:56:08Z knoop
144! Code annotations made doxygen readable
145!
146! 1677 2015-10-02 13:25:23Z boeske
147! New MPI-data types for exchange of 3D integer arrays.
148!
149! 1575 2015-03-27 09:56:27Z raasch
150! adjustments for psolver-queries, calculation of ngp_xz added
151!
152! 1565 2015-03-09 20:59:31Z suehring
153! Refine if-clause for setting nbgp.
154!
155! 1557 2015-03-05 16:43:04Z suehring
156! Adjustment for monotonic limiter
157!
158! 1468 2014-09-24 14:06:57Z maronga
159! Adapted for use on up to 6-digit processor cores
160!
161! 1435 2014-07-21 10:37:02Z keck
162! bugfix: added missing parameter coupling_mode_remote to ONLY-attribute
163!
164! 1402 2014-05-09 14:25:13Z raasch
165! location messages modified
166!
167! 1384 2014-05-02 14:31:06Z raasch
168! location messages added
169!
170! 1353 2014-04-08 15:21:23Z heinze
171! REAL constants provided with KIND-attribute
172!
173! 1322 2014-03-20 16:38:49Z raasch
174! REAL functions provided with KIND-attribute
175!
176! 1320 2014-03-20 08:40:49Z raasch
177! ONLY-attribute added to USE-statements,
178! kind-parameters added to all INTEGER and REAL declaration statements,
179! kinds are defined in new module kinds,
180! revision history before 2012 removed,
181! comment fields (!:) to be used for variable explanations added to
182! all variable declaration statements
183!
184! 1304 2014-03-12 10:29:42Z raasch
185! bugfix: single core MPI runs missed some settings of transpose indices
186!
187! 1212 2013-08-15 08:46:27Z raasch
188! error message for poisfft_hybrid removed
189!
190! 1159 2013-05-21 11:58:22Z fricke
191! dirichlet/neumann and neumann/dirichlet removed
192!
193! 1139 2013-04-18 07:25:03Z raasch
194! bugfix for calculating the id of the PE carrying the recycling plane
195!
196! 1111 2013-03-08 23:54:10Z raasch
197! initialization of poisfft moved to module poisfft
198!
199! 1092 2013-02-02 11:24:22Z raasch
200! unused variables removed
201!
202! 1056 2012-11-16 15:28:04Z raasch
203! Indices for arrays n.._mg start from zero due to definition of arrays f2 and
204! p2 as automatic arrays in recursive subroutine next_mg_level
205!
206! 1041 2012-11-06 02:36:29Z raasch
207! a 2d virtual processor topology is used by default for all machines
208!
209! 1036 2012-10-22 13:43:42Z raasch
210! code put under GPL (PALM 3.9)
211!
212! 1003 2012-09-14 14:35:53Z raasch
213! subdomains must have identical size (grid matching = "match" removed)
214!
215! 1001 2012-09-13 14:08:46Z raasch
216! all actions concerning upstream-spline-method removed
217!
218! 978 2012-08-09 08:28:32Z fricke
219! dirichlet/neumann and neumann/dirichlet added
220! nxlu and nysv are also calculated for inflow boundary
221!
222! 809 2012-01-30 13:32:58Z maronga
223! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
224!
225! 807 2012-01-25 11:53:51Z maronga
226! New cpp directive "__check" implemented which is used by check_namelist_files
227!
228! Revision 1.1  1997/07/24 11:15:09  raasch
229! Initial revision
230!
231!
232! Description:
233! ------------
234!> Determination of the virtual processor topology (if not prescribed by the
235!> user)and computation of the grid point number and array bounds of the local
236!> domains.
237!> @todo: remove MPI-data types for 2D exchange on coarse multigrid level (not
238!>        used any more)
239!------------------------------------------------------------------------------!
240 SUBROUTINE init_pegrid
241 
242
243    USE control_parameters,                                                    &
244        ONLY:  bc_dirichlet_l, bc_dirichlet_n, bc_dirichlet_r, bc_dirichlet_s, &
245               bc_lr, bc_ns, bc_radiation_l, bc_radiation_n, bc_radiation_r,   &
246               bc_radiation_s, coupling_mode, coupling_mode_remote,            &
247               coupling_topology, gathered_size, grid_level,                   &
248               grid_level_count, maximum_grid_level, message_string,           &
249               mg_switch_to_pe0_level, momentum_advec, neutral,                &
250               psolver, outflow_source_plane, recycling_width, scalar_advec,   &
251               subdomain_size, turbulent_outflow, y_shift
252
253    USE grid_variables,                                                        &
254        ONLY:  dx
255       
256    USE indices,                                                               &
257        ONLY:  mg_loc_ind, nbgp, nnx, nny, nnz, nx, nx_a, nx_o, nxl, nxl_mg,   &
258               nxlu, nxr, nxr_mg, ny, ny_a, ny_o, nyn, nyn_mg, nys, nys_mg,    &
259               nysv, nz, nzb, nzt, nzt_mg, wall_flags_1, wall_flags_2,         &
260               wall_flags_3, wall_flags_4, wall_flags_5, wall_flags_6,         &
261               wall_flags_7, wall_flags_8, wall_flags_9, wall_flags_10
262
263    USE kinds
264     
265    USE pegrid
266     
267    USE spectra_mod,                                                           &
268        ONLY:  calculate_spectra, dt_dosp
269
270    USE synthetic_turbulence_generator_mod,                                    &
271        ONLY:  id_stg_left, id_stg_north, id_stg_right, id_stg_south,          &
272               use_syn_turb_gen
273
274    USE transpose_indices,                                                     &
275        ONLY:  nxl_y, nxl_yd, nxl_z, nxr_y, nxr_yd, nxr_z, nyn_x, nyn_z, nys_x,&
276               nys_z, nzb_x, nzb_y, nzb_yd, nzt_x, nzt_yd, nzt_y
277
278    USE vertical_nesting_mod,                                                  &
279        ONLY:  vnested, vnest_init_pegrid_domain, vnest_init_pegrid_rank
280
281    IMPLICIT NONE
282
283    INTEGER(iwp) ::  i                        !<
284    INTEGER(iwp) ::  id_inflow_l              !<
285    INTEGER(iwp) ::  id_outflow_l             !< local value of id_outflow
286    INTEGER(iwp) ::  id_outflow_source_l      !< local value of id_outflow_source
287    INTEGER(iwp) ::  id_recycling_l           !<
288    INTEGER(iwp) ::  id_stg_left_l            !< left lateral boundary local core id in case of turbulence generator 
289    INTEGER(iwp) ::  id_stg_north_l           !< north lateral boundary local core id in case of turbulence generator 
290    INTEGER(iwp) ::  id_stg_right_l           !< right lateral boundary local core id in case of turbulence generator 
291    INTEGER(iwp) ::  id_stg_south_l           !< south lateral boundary local core id in case of turbulence generator 
292    INTEGER(iwp) ::  ind(5)                   !<
293    INTEGER(iwp) ::  j                        !<
294    INTEGER(iwp) ::  k                        !<
295    INTEGER(iwp) ::  maximum_grid_level_l     !<
296    INTEGER(iwp) ::  mg_levels_x              !<
297    INTEGER(iwp) ::  mg_levels_y              !<
298    INTEGER(iwp) ::  mg_levels_z              !<
299    INTEGER(iwp) ::  mg_switch_to_pe0_level_l !<
300    INTEGER(iwp) ::  nnx_y                    !<
301    INTEGER(iwp) ::  nnx_z                    !<
302    INTEGER(iwp) ::  nny_x                    !<
303    INTEGER(iwp) ::  nny_z                    !<
304    INTEGER(iwp) ::  nnz_x                    !<
305    INTEGER(iwp) ::  nnz_y                    !<
306    INTEGER(iwp) ::  numproc_sqr              !<
307    INTEGER(iwp) ::  nxl_l                    !<
308    INTEGER(iwp) ::  nxr_l                    !<
309    INTEGER(iwp) ::  nyn_l                    !<
310    INTEGER(iwp) ::  nys_l                    !<
311    INTEGER(iwp) ::  nzb_l                    !<
312    INTEGER(iwp) ::  nzt_l                    !<
313    INTEGER(iwp) ::  omp_get_num_threads      !<
314
315    INTEGER(iwp), DIMENSION(:), ALLOCATABLE ::  ind_all !<
316    INTEGER(iwp), DIMENSION(:), ALLOCATABLE ::  nxlf    !<
317    INTEGER(iwp), DIMENSION(:), ALLOCATABLE ::  nxrf    !<
318    INTEGER(iwp), DIMENSION(:), ALLOCATABLE ::  nynf    !<
319    INTEGER(iwp), DIMENSION(:), ALLOCATABLE ::  nysf    !<
320
321    INTEGER(iwp), DIMENSION(2) ::  pdims_remote         !<
322    INTEGER(iwp)               ::  lcoord(2)            !< PE coordinates of left neighbor along x and y
323    INTEGER(iwp)               ::  rcoord(2)            !< PE coordinates of right neighbor along x and y
324
325!
326!-- Get the number of OpenMP threads
327    !$OMP PARALLEL
328!$  threads_per_task = omp_get_num_threads()
329    !$OMP END PARALLEL
330
331
332#if defined( __parallel )
333
334    CALL location_message( 'creating virtual PE grids + MPI derived data types', &
335                           .FALSE. )
336
337!
338!-- Determine the processor topology or check it, if prescribed by the user
339    IF ( npex == -1  .AND.  npey == -1 )  THEN
340
341!
342!--    Automatic determination of the topology
343       numproc_sqr = SQRT( REAL( numprocs, KIND=wp ) )
344       pdims(1)    = MAX( numproc_sqr , 1 )
345       DO  WHILE ( MOD( numprocs , pdims(1) ) /= 0 )
346          pdims(1) = pdims(1) - 1
347       ENDDO
348       pdims(2) = numprocs / pdims(1)
349
350    ELSEIF ( npex /= -1  .AND.  npey /= -1 )  THEN
351
352!
353!--    Prescribed by user. Number of processors on the prescribed topology
354!--    must be equal to the number of PEs available to the job
355       IF ( ( npex * npey ) /= numprocs )  THEN
356          WRITE( message_string, * ) 'number of PEs of the prescribed ',       &
357              'topology (', npex*npey,') does not match & the number of ',     &
358              'PEs available to the job (', numprocs, ')'
359          CALL message( 'init_pegrid', 'PA0221', 1, 2, 0, 6, 0 )
360       ENDIF
361       pdims(1) = npex
362       pdims(2) = npey
363
364    ELSE
365!
366!--    If the processor topology is prescribed by the user, the number of
367!--    PEs must be given in both directions
368       message_string = 'if the processor topology is prescribed by th' //     &
369                'e user & both values of "npex" and "npey" must be given' //   &
370                ' in the &NAMELIST-parameter file'
371       CALL message( 'init_pegrid', 'PA0222', 1, 2, 0, 6, 0 )
372
373    ENDIF
374
375!
376!-- If necessary, set horizontal boundary conditions to non-cyclic
377    IF ( bc_lr /= 'cyclic' )  cyclic(1) = .FALSE.
378    IF ( bc_ns /= 'cyclic' )  cyclic(2) = .FALSE.
379
380
381!
382!-- Create the virtual processor grid
383    CALL MPI_CART_CREATE( comm_palm, ndim, pdims, cyclic, reorder, &
384                          comm2d, ierr )
385    CALL MPI_COMM_RANK( comm2d, myid, ierr )
386    WRITE (myid_char,'(''_'',I6.6)')  myid
387
388    CALL MPI_CART_COORDS( comm2d, myid, ndim, pcoord, ierr )
389    CALL MPI_CART_SHIFT( comm2d, 0, 1, pleft, pright, ierr )
390    CALL MPI_CART_SHIFT( comm2d, 1, 1, psouth, pnorth, ierr )
391!
392!-- In case of cyclic boundary conditions, a y-shift at the boundaries in
393!-- x-direction can be introduced via parameter y_shift. The shift is done
394!-- by modifying the processor grid in such a way that processors located
395!-- at the x-boundary communicate across it to processors with y-coordinate
396!-- shifted by y_shift relative to their own. This feature can not be used
397!-- in combination with an fft pressure solver. It has been implemented to
398!-- counter the effect of streak structures in case of cyclic boundary
399!-- conditions. For a description of these see Munters
400!-- (2016; dx.doi.org/10.1063/1.4941912)
401!--
402!-- Get coordinates of left and right neighbor on PE grid
403    IF ( y_shift /= 0 ) THEN
404
405       IF ( bc_lr /= 'cyclic'  .OR.  bc_ns /= 'cyclic' )  THEN
406          message_string = 'y_shift /= 0 is only allowed for cyclic ' //       &
407                           'boundary conditions in both directions '
408          CALL message( 'check_parameters', 'PA0467', 1, 2, 0, 6, 0 )
409       ENDIF
410       IF ( TRIM( psolver ) /= 'multigrid' .AND.                               &
411            TRIM( psolver ) /= 'multigrid_noopt')                              &
412       THEN
413          message_string = 'y_shift /= 0 requires a multigrid pressure solver '
414          CALL message( 'check_parameters', 'PA0468', 1, 2, 0, 6, 0 )
415       ENDIF
416
417       CALL MPI_CART_COORDS( comm2d, pright, ndim, rcoord, ierr )
418       CALL MPI_CART_COORDS( comm2d, pleft, ndim, lcoord, ierr )
419
420!
421!--    If the x(y)-coordinate of the right (left) neighbor is smaller (greater)
422!--    than that of the calling process, then the calling process is located on
423!--    the right (left) boundary of the processor grid. In that case,
424!--    the y-coordinate of that neighbor is increased (decreased) by y_shift.
425!--    The rank of the process with that coordinate is then inquired and the
426!--    neighbor rank for MPI_SENDRECV, pright (pleft) is set to it.
427!--    In this way, the calling process receives a new right (left) neighbor
428!--    for all future MPI_SENDRECV calls. That neighbor has a y-coordinate
429!--    of y+(-)y_shift, where y is the original right (left) neighbor's
430!--    y-coordinate. The modulo-operation ensures that if the neighbor's
431!--    y-coordinate exceeds the grid-boundary, it will be relocated to
432!--    the opposite part of the grid cyclicly.
433       IF ( rcoord(1) < pcoord(1) ) THEN
434          rcoord(2) = MODULO( rcoord(2) + y_shift, pdims(2) )
435          CALL MPI_CART_RANK( comm2d, rcoord, pright, ierr )
436       ENDIF
437
438       IF ( lcoord(1) > pcoord(1) ) THEN
439          lcoord(2) = MODULO( lcoord(2) - y_shift, pdims(2) )
440          CALL MPI_CART_RANK( comm2d, lcoord, pleft, ierr )
441       ENDIF
442    ENDIF
443!
444!-- Vertical nesting: store four lists that identify partner ranks to exchange
445!-- data
446    IF ( vnested )  CALL vnest_init_pegrid_rank
447
448!
449!-- Determine sub-topologies for transpositions
450!-- Transposition from z to x:
451    remain_dims(1) = .TRUE.
452    remain_dims(2) = .FALSE.
453    CALL MPI_CART_SUB( comm2d, remain_dims, comm1dx, ierr )
454    CALL MPI_COMM_RANK( comm1dx, myidx, ierr )
455!
456!-- Transposition from x to y
457    remain_dims(1) = .FALSE.
458    remain_dims(2) = .TRUE.
459    CALL MPI_CART_SUB( comm2d, remain_dims, comm1dy, ierr )
460    CALL MPI_COMM_RANK( comm1dy, myidy, ierr )
461
462
463!
464!-- Calculate array bounds along x-direction for every PE.
465    ALLOCATE( nxlf(0:pdims(1)-1), nxrf(0:pdims(1)-1), nynf(0:pdims(2)-1),      &
466              nysf(0:pdims(2)-1) )
467
468    IF ( MOD( nx+1 , pdims(1) ) /= 0 )  THEN
469       WRITE( message_string, * ) 'x-direction: gridpoint number (',nx+1,') ', &
470                               'is not an& integral divisor of the number ',    &
471                               'of processors (', pdims(1),')'
472       CALL message( 'init_pegrid', 'PA0225', 1, 2, 0, 6, 0 )
473    ELSE
474       nnx  = ( nx + 1 ) / pdims(1)
475    ENDIF   
476
477!
478!-- Left and right array bounds, number of gridpoints
479    DO  i = 0, pdims(1)-1
480       nxlf(i)   = i * nnx
481       nxrf(i)   = ( i + 1 ) * nnx - 1
482    ENDDO
483
484!
485!-- Calculate array bounds in y-direction for every PE.
486    IF ( MOD( ny+1 , pdims(2) ) /= 0 )  THEN
487       WRITE( message_string, * ) 'y-direction: gridpoint number (',ny+1,') ', &
488                           'is not an& integral divisor of the number of',      &
489                           'processors (', pdims(2),')'
490       CALL message( 'init_pegrid', 'PA0227', 1, 2, 0, 6, 0 )
491    ELSE
492       nny  = ( ny + 1 ) / pdims(2)
493    ENDIF   
494
495!
496!-- South and north array bounds
497    DO  j = 0, pdims(2)-1
498       nysf(j)   = j * nny
499       nynf(j)   = ( j + 1 ) * nny - 1
500    ENDDO
501
502!
503!-- Local array bounds of the respective PEs
504    nxl = nxlf(pcoord(1))
505    nxr = nxrf(pcoord(1))
506    nys = nysf(pcoord(2))
507    nyn = nynf(pcoord(2))
508    nzb = 0
509    nzt = nz
510    nnz = nz
511
512!
513!-- Set switches to define if the PE is situated at the border of the virtual
514!-- processor grid
515    IF ( nxl == 0 )   left_border_pe  = .TRUE.
516    IF ( nxr == nx )  right_border_pe = .TRUE.
517    IF ( nys == 0 )   south_border_pe = .TRUE.
518    IF ( nyn == ny )  north_border_pe = .TRUE.
519
520!
521!-- Calculate array bounds and gridpoint numbers for the transposed arrays
522!-- (needed in the pressure solver)
523!-- For the transposed arrays, cyclic boundaries as well as top and bottom
524!-- boundaries are omitted, because they are obstructive to the transposition
525
526!
527!-- 1. transposition  z --> x
528!-- This transposition is not neccessary in case of a 1d-decomposition along x
529    IF ( psolver == 'poisfft'  .OR.  calculate_spectra )  THEN
530
531       IF ( pdims(2) /= 1 )  THEN
532          IF ( MOD( nz , pdims(1) ) /= 0 )  THEN
533             WRITE( message_string, * ) 'transposition z --> x:',              &
534                       '& nz=',nz,' is not an integral divisior of pdims(1)=', &
535                                                                   pdims(1)
536             CALL message( 'init_pegrid', 'PA0230', 1, 2, 0, 6, 0 )
537          ENDIF
538       ENDIF
539
540       nys_x = nys
541       nyn_x = nyn
542       nny_x = nny
543       nnz_x = nz / pdims(1)
544       nzb_x = 1 + myidx * nnz_x
545       nzt_x = ( myidx + 1 ) * nnz_x
546       sendrecvcount_zx = nnx * nny * nnz_x
547
548    ENDIF
549
550
551    IF ( psolver == 'poisfft' )  THEN 
552!
553!--    2. transposition  x --> y
554       IF ( MOD( nx+1 , pdims(2) ) /= 0 )  THEN
555          WRITE( message_string, * ) 'transposition x --> y:',                 &
556                            '& nx+1=',nx+1,' is not an integral divisor of ',  &
557                            'pdims(2)=',pdims(2)
558          CALL message( 'init_pegrid', 'PA0231', 1, 2, 0, 6, 0 )
559       ENDIF
560
561       nnz_y = nnz_x
562       nzb_y = nzb_x
563       nzt_y = nzt_x
564       nnx_y = (nx+1) / pdims(2)
565       nxl_y = myidy * nnx_y
566       nxr_y = ( myidy + 1 ) * nnx_y - 1
567       sendrecvcount_xy = nnx_y * nny_x * nnz_y
568!
569!--    3. transposition  y --> z 
570!--    (ELSE:  x --> y  in case of 1D-decomposition along x)
571       nxl_z = nxl_y
572       nxr_z = nxr_y
573       nny_z = (ny+1) / pdims(1)
574       nys_z = myidx * nny_z
575       nyn_z = ( myidx + 1 ) * nny_z - 1
576       sendrecvcount_yz = nnx_y * nny_z * nnz_y
577
578       IF ( pdims(2) /= 1 )  THEN
579!
580!--       y --> z
581!--       This transposition is not neccessary in case of a 1d-decomposition
582!--       along x, except that the uptream-spline method is switched on
583          IF ( MOD( ny+1 , pdims(1) ) /= 0 )  THEN
584             WRITE( message_string, * ) 'transposition y --> z:',              &
585                               '& ny+1=',ny+1,' is not an integral divisor of',&
586                               ' pdims(1)=',pdims(1)
587             CALL message( 'init_pegrid', 'PA0232', 1, 2, 0, 6, 0 )
588          ENDIF
589
590       ELSE
591!
592!--       x --> y
593!--       This condition must be fulfilled for a 1D-decomposition along x
594          IF ( MOD( ny+1 , pdims(1) ) /= 0 )  THEN
595             WRITE( message_string, * ) 'transposition x --> y:',              &
596                               '& ny+1=',ny+1,' is not an integral divisor of',&
597                               ' pdims(1)=',pdims(1)
598             CALL message( 'init_pegrid', 'PA0233', 1, 2, 0, 6, 0 )
599          ENDIF
600
601       ENDIF
602
603    ENDIF
604
605!
606!-- Indices for direct transpositions z --> y (used for calculating spectra)
607    IF ( calculate_spectra )  THEN
608       IF ( MOD( nz, pdims(2) ) /= 0 )  THEN
609          WRITE( message_string, * ) 'direct transposition z --> y (needed ',  &
610                    'for spectra): nz=',nz,' is not an integral divisor of ',  &
611                    'pdims(2)=',pdims(2)
612          CALL message( 'init_pegrid', 'PA0234', 1, 2, 0, 6, 0 )
613       ELSE
614          nxl_yd = nxl
615          nxr_yd = nxr
616          nzb_yd = 1 + myidy * ( nz / pdims(2) )
617          nzt_yd = ( myidy + 1 ) * ( nz / pdims(2) )
618          sendrecvcount_zyd = nnx * nny * ( nz / pdims(2) )
619       ENDIF
620    ENDIF
621
622    IF ( psolver == 'poisfft'  .OR.  calculate_spectra )  THEN
623!
624!--    Indices for direct transpositions y --> x
625!--    (they are only possible in case of a 1d-decomposition along x)
626       IF ( pdims(2) == 1 )  THEN
627          nny_x = nny / pdims(1)
628          nys_x = myid * nny_x
629          nyn_x = ( myid + 1 ) * nny_x - 1
630          nzb_x = 1
631          nzt_x = nz
632          sendrecvcount_xy = nnx * nny_x * nz
633       ENDIF
634
635    ENDIF
636
637    IF ( psolver == 'poisfft' )  THEN
638!
639!--    Indices for direct transpositions x --> y
640!--    (they are only possible in case of a 1d-decomposition along y)
641       IF ( pdims(1) == 1 )  THEN
642          nnx_y = nnx / pdims(2)
643          nxl_y = myid * nnx_y
644          nxr_y = ( myid + 1 ) * nnx_y - 1
645          nzb_y = 1
646          nzt_y = nz
647          sendrecvcount_xy = nnx_y * nny * nz
648       ENDIF
649
650    ENDIF
651
652!
653!-- Arrays for storing the array bounds are needed any more
654    DEALLOCATE( nxlf , nxrf , nynf , nysf )
655
656
657!
658!-- Collect index bounds from other PEs (to be written to restart file later)
659    ALLOCATE( hor_index_bounds(4,0:numprocs-1) )
660
661    IF ( myid == 0 )  THEN
662
663       hor_index_bounds(1,0) = nxl
664       hor_index_bounds(2,0) = nxr
665       hor_index_bounds(3,0) = nys
666       hor_index_bounds(4,0) = nyn
667
668!
669!--    Receive data from all other PEs
670       DO  i = 1, numprocs-1
671          CALL MPI_RECV( ibuf, 4, MPI_INTEGER, i, MPI_ANY_TAG, comm2d, status, &
672                         ierr )
673          hor_index_bounds(:,i) = ibuf(1:4)
674       ENDDO
675
676    ELSE
677!
678!--    Send index bounds to PE0
679       ibuf(1) = nxl
680       ibuf(2) = nxr
681       ibuf(3) = nys
682       ibuf(4) = nyn
683       CALL MPI_SEND( ibuf, 4, MPI_INTEGER, 0, myid, comm2d, ierr )
684
685    ENDIF
686
687
688#if defined( __print )
689!
690!-- Control output
691    IF ( myid == 0 )  THEN
692       PRINT*, '*** processor topology ***'
693       PRINT*, ' '
694       PRINT*, 'myid   pcoord    left right  south north  idx idy   nxl: nxr',&
695               &'   nys: nyn'
696       PRINT*, '------------------------------------------------------------',&
697               &'-----------'
698       WRITE (*,1000)  0, pcoord(1), pcoord(2), pleft, pright, psouth, pnorth, &
699                       myidx, myidy, nxl, nxr, nys, nyn
7001000   FORMAT (I4,2X,'(',I3,',',I3,')',3X,I4,2X,I4,3X,I4,2X,I4,2X,I3,1X,I3, &
701               2(2X,I4,':',I4))
702
703!
704!--    Receive data from the other PEs
705       DO  i = 1,numprocs-1
706          CALL MPI_RECV( ibuf, 12, MPI_INTEGER, i, MPI_ANY_TAG, comm2d, status, &
707                         ierr )
708          WRITE (*,1000)  i, ( ibuf(j) , j = 1,12 )
709       ENDDO
710    ELSE
711
712!
713!--    Send data to PE0
714       ibuf(1) = pcoord(1); ibuf(2) = pcoord(2); ibuf(3) = pleft
715       ibuf(4) = pright; ibuf(5) = psouth; ibuf(6) = pnorth; ibuf(7) = myidx
716       ibuf(8) = myidy; ibuf(9) = nxl; ibuf(10) = nxr; ibuf(11) = nys
717       ibuf(12) = nyn
718       CALL MPI_SEND( ibuf, 12, MPI_INTEGER, 0, myid, comm2d, ierr )       
719    ENDIF
720#endif
721
722!
723!-- Determine the number of ghost point layers
724    IF ( ( scalar_advec == 'ws-scheme' .AND. .NOT. neutral ) .OR.             &
725         momentum_advec == 'ws-scheme' )  THEN
726       nbgp = 3
727    ELSE
728       nbgp = 1
729    ENDIF 
730
731!
732!-- Create a new MPI derived datatype for the exchange of surface (xy) data,
733!-- which is needed for coupled atmosphere-ocean runs.
734!-- First, calculate number of grid points of an xy-plane.
735    ngp_xy  = ( nxr - nxl + 1 + 2 * nbgp ) * ( nyn - nys + 1 + 2 * nbgp )
736    CALL MPI_TYPE_VECTOR( ngp_xy, 1, nzt-nzb+2, MPI_REAL, type_xy, ierr )
737    CALL MPI_TYPE_COMMIT( type_xy, ierr )
738
739    IF ( TRIM( coupling_mode ) /= 'uncoupled' .AND. .NOT. vnested )  THEN
740   
741!
742!--    Pass the number of grid points of the atmosphere model to
743!--    the ocean model and vice versa
744       IF ( coupling_mode == 'atmosphere_to_ocean' )  THEN
745
746          nx_a = nx
747          ny_a = ny
748
749          IF ( myid == 0 )  THEN
750
751             CALL MPI_SEND( nx_a, 1, MPI_INTEGER, numprocs, 1, comm_inter,  &
752                            ierr )
753             CALL MPI_SEND( ny_a, 1, MPI_INTEGER, numprocs, 2, comm_inter,  &
754                            ierr )
755             CALL MPI_SEND( pdims, 2, MPI_INTEGER, numprocs, 3, comm_inter, &
756                            ierr )
757             CALL MPI_RECV( nx_o, 1, MPI_INTEGER, numprocs, 4, comm_inter,  &
758                            status, ierr )
759             CALL MPI_RECV( ny_o, 1, MPI_INTEGER, numprocs, 5, comm_inter,  &
760                            status, ierr )
761             CALL MPI_RECV( pdims_remote, 2, MPI_INTEGER, numprocs, 6,      &
762                            comm_inter, status, ierr )
763          ENDIF
764
765          CALL MPI_BCAST( nx_o, 1, MPI_INTEGER, 0, comm2d, ierr )
766          CALL MPI_BCAST( ny_o, 1, MPI_INTEGER, 0, comm2d, ierr ) 
767          CALL MPI_BCAST( pdims_remote, 2, MPI_INTEGER, 0, comm2d, ierr )
768       
769       ELSEIF ( coupling_mode == 'ocean_to_atmosphere' )  THEN
770
771          nx_o = nx
772          ny_o = ny 
773
774          IF ( myid == 0 ) THEN
775
776             CALL MPI_RECV( nx_a, 1, MPI_INTEGER, 0, 1, comm_inter, status, &
777                            ierr )
778             CALL MPI_RECV( ny_a, 1, MPI_INTEGER, 0, 2, comm_inter, status, &
779                            ierr )
780             CALL MPI_RECV( pdims_remote, 2, MPI_INTEGER, 0, 3, comm_inter, &
781                            status, ierr )
782             CALL MPI_SEND( nx_o, 1, MPI_INTEGER, 0, 4, comm_inter, ierr )
783             CALL MPI_SEND( ny_o, 1, MPI_INTEGER, 0, 5, comm_inter, ierr )
784             CALL MPI_SEND( pdims, 2, MPI_INTEGER, 0, 6, comm_inter, ierr )
785          ENDIF
786
787          CALL MPI_BCAST( nx_a, 1, MPI_INTEGER, 0, comm2d, ierr)
788          CALL MPI_BCAST( ny_a, 1, MPI_INTEGER, 0, comm2d, ierr) 
789          CALL MPI_BCAST( pdims_remote, 2, MPI_INTEGER, 0, comm2d, ierr) 
790
791       ENDIF
792 
793       ngp_a = ( nx_a+1 + 2 * nbgp ) * ( ny_a+1 + 2 * nbgp )
794       ngp_o = ( nx_o+1 + 2 * nbgp ) * ( ny_o+1 + 2 * nbgp )
795
796!
797!--    Determine if the horizontal grid and the number of PEs in ocean and
798!--    atmosphere is same or not
799       IF ( nx_o == nx_a  .AND.  ny_o == ny_a  .AND.  &
800            pdims(1) == pdims_remote(1) .AND. pdims(2) == pdims_remote(2) ) &
801       THEN
802          coupling_topology = 0
803       ELSE
804          coupling_topology = 1
805       ENDIF 
806
807!
808!--    Determine the target PEs for the exchange between ocean and
809!--    atmosphere (comm2d)
810       IF ( coupling_topology == 0 )  THEN
811!
812!--       In case of identical topologies, every atmosphere PE has exactly one
813!--       ocean PE counterpart and vice versa
814          IF ( TRIM( coupling_mode ) == 'atmosphere_to_ocean' ) THEN
815             target_id = myid + numprocs
816          ELSE
817             target_id = myid 
818          ENDIF
819
820       ELSE
821!
822!--       In case of nonequivalent topology in ocean and atmosphere only for
823!--       PE0 in ocean and PE0 in atmosphere a target_id is needed, since
824!--       data echxchange between ocean and atmosphere will be done only
825!--       between these PEs.   
826          IF ( myid == 0 )  THEN
827
828             IF ( TRIM( coupling_mode ) == 'atmosphere_to_ocean' )  THEN
829                target_id = numprocs 
830             ELSE
831                target_id = 0
832             ENDIF
833
834          ENDIF
835
836       ENDIF
837
838    ENDIF
839
840!
841!-- Store partner grid point co-ordinates as lists.
842!-- Create custom MPI vector datatypes for contiguous data transfer
843    IF ( vnested )  CALL vnest_init_pegrid_domain
844
845#else
846
847!
848!-- Array bounds when running on a single PE (respectively a non-parallel
849!-- machine)
850    nxl = 0
851    nxr = nx
852    nnx = nxr - nxl + 1
853    nys = 0
854    nyn = ny
855    nny = nyn - nys + 1
856    nzb = 0
857    nzt = nz
858    nnz = nz
859
860    ALLOCATE( hor_index_bounds(4,0:0) )
861    hor_index_bounds(1,0) = nxl
862    hor_index_bounds(2,0) = nxr
863    hor_index_bounds(3,0) = nys
864    hor_index_bounds(4,0) = nyn
865
866!
867!-- Array bounds for the pressure solver (in the parallel code, these bounds
868!-- are the ones for the transposed arrays)
869    nys_x = nys
870    nyn_x = nyn
871    nzb_x = nzb + 1
872    nzt_x = nzt
873
874    nxl_y = nxl
875    nxr_y = nxr
876    nzb_y = nzb + 1
877    nzt_y = nzt
878
879    nxl_z = nxl
880    nxr_z = nxr
881    nys_z = nys
882    nyn_z = nyn
883
884#endif
885
886!
887!-- Calculate number of grid levels necessary for the multigrid poisson solver
888!-- as well as the gridpoint indices on each level
889    IF ( psolver(1:9) == 'multigrid' )  THEN
890
891!
892!--    First calculate number of possible grid levels for the subdomains
893       mg_levels_x = 1
894       mg_levels_y = 1
895       mg_levels_z = 1
896
897       i = nnx
898       DO WHILE ( MOD( i, 2 ) == 0  .AND.  i /= 2 )
899          i = i / 2
900          mg_levels_x = mg_levels_x + 1
901       ENDDO
902
903       j = nny
904       DO WHILE ( MOD( j, 2 ) == 0  .AND.  j /= 2 )
905          j = j / 2
906          mg_levels_y = mg_levels_y + 1
907       ENDDO
908
909       k = nz    ! do not use nnz because it might be > nz due to transposition
910                 ! requirements
911       DO WHILE ( MOD( k, 2 ) == 0  .AND.  k /= 2 )
912          k = k / 2
913          mg_levels_z = mg_levels_z + 1
914       ENDDO
915!
916!--    The optimized MG-solver does not allow odd values for nz at the coarsest
917!--    grid level
918       IF ( TRIM( psolver ) /= 'multigrid_noopt' )  THEN
919          IF ( MOD( k, 2 ) /= 0 )  mg_levels_z = mg_levels_z - 1
920!
921!--       An odd value of nz does not work. The finest level must have an even
922!--       value.
923          IF (  mg_levels_z == 0 )  THEN
924             message_string = 'optimized multigrid method requires nz to be even'
925             CALL message( 'init_pegrid', 'PA0495', 1, 2, 0, 6, 0 )
926          ENDIF
927       ENDIF
928
929       maximum_grid_level = MIN( mg_levels_x, mg_levels_y, mg_levels_z )
930
931!
932!--    Find out, if the total domain allows more levels. These additional
933!--    levels are identically processed on all PEs.
934       IF ( numprocs > 1  .AND.  mg_switch_to_pe0_level /= -1 )  THEN
935
936          IF ( mg_levels_z > MIN( mg_levels_x, mg_levels_y ) )  THEN
937
938             mg_switch_to_pe0_level_l = maximum_grid_level
939
940             mg_levels_x = 1
941             mg_levels_y = 1
942
943             i = nx+1
944             DO WHILE ( MOD( i, 2 ) == 0  .AND.  i /= 2 )
945                i = i / 2
946                mg_levels_x = mg_levels_x + 1
947             ENDDO
948
949             j = ny+1
950             DO WHILE ( MOD( j, 2 ) == 0  .AND.  j /= 2 )
951                j = j / 2
952                mg_levels_y = mg_levels_y + 1
953             ENDDO
954
955             maximum_grid_level_l = MIN( mg_levels_x, mg_levels_y, mg_levels_z )
956
957             IF ( maximum_grid_level_l > mg_switch_to_pe0_level_l )  THEN
958                mg_switch_to_pe0_level_l = maximum_grid_level_l - &
959                                           mg_switch_to_pe0_level_l + 1
960             ELSE
961                mg_switch_to_pe0_level_l = 0
962             ENDIF
963
964          ELSE
965
966             mg_switch_to_pe0_level_l = 0
967             maximum_grid_level_l = maximum_grid_level
968
969          ENDIF
970
971!
972!--       Use switch level calculated above only if it is not pre-defined
973!--       by user
974          IF ( mg_switch_to_pe0_level == 0 )  THEN
975             IF ( mg_switch_to_pe0_level_l /= 0 )  THEN
976                mg_switch_to_pe0_level = mg_switch_to_pe0_level_l
977                maximum_grid_level     = maximum_grid_level_l
978             ENDIF
979
980          ELSE
981!
982!--          Check pre-defined value and reset to default, if neccessary
983             IF ( mg_switch_to_pe0_level < mg_switch_to_pe0_level_l  .OR.      &
984                  mg_switch_to_pe0_level >= maximum_grid_level_l )  THEN
985                message_string = 'mg_switch_to_pe0_level ' //                  &
986                                 'out of range and reset to 0'
987                CALL message( 'init_pegrid', 'PA0235', 0, 1, 0, 6, 0 )
988                mg_switch_to_pe0_level = 0
989             ELSE
990!
991!--             Use the largest number of possible levels anyway and recalculate
992!--             the switch level to this largest number of possible values
993                maximum_grid_level = maximum_grid_level_l
994
995             ENDIF
996
997          ENDIF
998
999       ENDIF
1000
1001       ALLOCATE( grid_level_count(maximum_grid_level),                       &
1002                 nxl_mg(0:maximum_grid_level), nxr_mg(0:maximum_grid_level), &
1003                 nyn_mg(0:maximum_grid_level), nys_mg(0:maximum_grid_level), &
1004                 nzt_mg(0:maximum_grid_level) )
1005
1006       grid_level_count = 0
1007!
1008!--    Index zero required as dummy due to definition of arrays f2 and p2 in
1009!--    recursive subroutine next_mg_level
1010       nxl_mg(0) = 0; nxr_mg(0) = 0; nyn_mg(0) = 0; nys_mg(0) = 0; nzt_mg(0) = 0
1011
1012       nxl_l = nxl; nxr_l = nxr; nys_l = nys; nyn_l = nyn; nzt_l = nzt
1013
1014       DO  i = maximum_grid_level, 1 , -1
1015
1016          IF ( i == mg_switch_to_pe0_level )  THEN
1017#if defined( __parallel )
1018!
1019!--          Save the grid size of the subdomain at the switch level, because
1020!--          it is needed in poismg.
1021             ind(1) = nxl_l; ind(2) = nxr_l
1022             ind(3) = nys_l; ind(4) = nyn_l
1023             ind(5) = nzt_l
1024             ALLOCATE( ind_all(5*numprocs), mg_loc_ind(5,0:numprocs-1) )
1025             CALL MPI_ALLGATHER( ind, 5, MPI_INTEGER, ind_all, 5, &
1026                                 MPI_INTEGER, comm2d, ierr )
1027             DO  j = 0, numprocs-1
1028                DO  k = 1, 5
1029                   mg_loc_ind(k,j) = ind_all(k+j*5)
1030                ENDDO
1031             ENDDO
1032             DEALLOCATE( ind_all )
1033!
1034!--          Calculate the grid size of the total domain
1035             nxr_l = ( nxr_l-nxl_l+1 ) * pdims(1) - 1
1036             nxl_l = 0
1037             nyn_l = ( nyn_l-nys_l+1 ) * pdims(2) - 1
1038             nys_l = 0
1039!
1040!--          The size of this gathered array must not be larger than the
1041!--          array tend, which is used in the multigrid scheme as a temporary
1042!--          array. Therefore the subdomain size of an PE is calculated and
1043!--          the size of the gathered grid. These values are used in 
1044!--          routines pres and poismg
1045             subdomain_size = ( nxr - nxl + 2 * nbgp + 1 ) * &
1046                              ( nyn - nys + 2 * nbgp + 1 ) * ( nzt - nzb + 2 )
1047             gathered_size  = ( nxr_l - nxl_l + 3 ) * ( nyn_l - nys_l + 3 ) *  &
1048                              ( nzt_l - nzb + 2 )
1049
1050#else
1051             message_string = 'multigrid gather/scatter impossible ' //        &
1052                          'in non parallel mode'
1053             CALL message( 'init_pegrid', 'PA0237', 1, 2, 0, 6, 0 )
1054#endif
1055          ENDIF
1056
1057          nxl_mg(i) = nxl_l
1058          nxr_mg(i) = nxr_l
1059          nys_mg(i) = nys_l
1060          nyn_mg(i) = nyn_l
1061          nzt_mg(i) = nzt_l
1062
1063          nxl_l = nxl_l / 2 
1064          nxr_l = nxr_l / 2
1065          nys_l = nys_l / 2 
1066          nyn_l = nyn_l / 2 
1067          nzt_l = nzt_l / 2 
1068
1069       ENDDO
1070
1071!
1072!--    Temporary problem: Currently calculation of maxerror in routine poismg crashes
1073!--    if grid data are collected on PE0 already on the finest grid level.
1074!--    To be solved later.
1075       IF ( maximum_grid_level == mg_switch_to_pe0_level )  THEN
1076          message_string = 'grid coarsening on subdomain level cannot be performed'
1077          CALL message( 'poismg', 'PA0236', 1, 2, 0, 6, 0 )
1078       ENDIF
1079
1080    ELSE
1081
1082       maximum_grid_level = 0
1083
1084    ENDIF
1085
1086!
1087!-- Default level 0 tells exchange_horiz that all ghost planes have to be
1088!-- exchanged. grid_level is adjusted in poismg, where only one ghost plane
1089!-- is required.
1090    grid_level = 0
1091
1092#if defined( __parallel )
1093!
1094!-- Gridpoint number for the exchange of ghost points (y-line for 2D-arrays)
1095    ngp_y  = nyn - nys + 1 + 2 * nbgp
1096
1097!
1098!-- Define new MPI derived datatypes for the exchange of ghost points in
1099!-- x- and y-direction for 2D-arrays (line)
1100    CALL MPI_TYPE_VECTOR( nxr-nxl+1+2*nbgp, nbgp, ngp_y, MPI_REAL, type_x,     &
1101                          ierr )
1102    CALL MPI_TYPE_COMMIT( type_x, ierr )
1103
1104    CALL MPI_TYPE_VECTOR( nbgp, ngp_y, ngp_y, MPI_REAL, type_y, ierr )
1105    CALL MPI_TYPE_COMMIT( type_y, ierr )
1106!
1107!-- Define new MPI derived datatypes for the exchange of ghost points in
1108!-- x- and y-direction for 2D-INTEGER arrays (line) - on normal grid
1109    ALLOCATE( type_x_int(0:maximum_grid_level),                                &
1110              type_y_int(0:maximum_grid_level) )
1111
1112    CALL MPI_TYPE_VECTOR( nxr-nxl+1+2*nbgp, nbgp, ngp_y, MPI_INTEGER,          &
1113                          type_x_int(0), ierr )
1114    CALL MPI_TYPE_COMMIT( type_x_int(0), ierr )
1115
1116    CALL MPI_TYPE_VECTOR( nbgp, ngp_y, ngp_y, MPI_INTEGER, type_y_int(0), ierr )
1117    CALL MPI_TYPE_COMMIT( type_y_int(0), ierr )
1118!
1119!-- Calculate gridpoint numbers for the exchange of ghost points along x
1120!-- (yz-plane for 3D-arrays) and define MPI derived data type(s) for the
1121!-- exchange of ghost points in y-direction (xz-plane).
1122!-- Do these calculations for the model grid and (if necessary) also
1123!-- for the coarser grid levels used in the multigrid method
1124    ALLOCATE ( ngp_xz(0:maximum_grid_level),                                   &
1125               ngp_xz_int(0:maximum_grid_level),                               &
1126               ngp_yz(0:maximum_grid_level),                                   &
1127               ngp_yz_int(0:maximum_grid_level),                               &
1128               type_xz(0:maximum_grid_level),                                  &
1129               type_xz_int(0:maximum_grid_level),                              &
1130               type_yz(0:maximum_grid_level),                                  &
1131               type_yz_int(0:maximum_grid_level) )
1132
1133    nxl_l = nxl; nxr_l = nxr; nys_l = nys; nyn_l = nyn; nzb_l = nzb; nzt_l = nzt
1134
1135!
1136!-- Discern between the model grid, which needs nbgp ghost points and
1137!-- grid levels for the multigrid scheme. In the latter case only one
1138!-- ghost point is necessary.
1139!-- First definition of MPI-datatypes for exchange of ghost layers on normal
1140!-- grid. The following loop is needed for data exchange in poismg.f90.
1141!
1142!-- Determine number of grid points of yz-layer for exchange
1143    ngp_yz(0) = (nzt - nzb + 2) * (nyn - nys + 1 + 2 * nbgp)
1144
1145!
1146!-- Define an MPI-datatype for the exchange of left/right boundaries.
1147!-- Although data are contiguous in physical memory (which does not
1148!-- necessarily require an MPI-derived datatype), the data exchange between
1149!-- left and right PE's using the MPI-derived type is 10% faster than without.
1150    CALL MPI_TYPE_VECTOR( nxr-nxl+1+2*nbgp, nbgp*(nzt-nzb+2), ngp_yz(0), &
1151                          MPI_REAL, type_xz(0), ierr )
1152    CALL MPI_TYPE_COMMIT( type_xz(0), ierr )
1153
1154    CALL MPI_TYPE_VECTOR( nbgp, ngp_yz(0), ngp_yz(0), MPI_REAL, type_yz(0), &
1155                          ierr ) 
1156    CALL MPI_TYPE_COMMIT( type_yz(0), ierr )
1157
1158!
1159!-- Define data types for exchange of 3D Integer arrays.
1160    ngp_yz_int(0) = (nzt - nzb + 2) * (nyn - nys + 1 + 2 * nbgp)
1161
1162    CALL MPI_TYPE_VECTOR( nxr-nxl+1+2*nbgp, nbgp*(nzt-nzb+2), ngp_yz_int(0),   &
1163                          MPI_INTEGER, type_xz_int(0), ierr )
1164    CALL MPI_TYPE_COMMIT( type_xz_int(0), ierr )
1165
1166    CALL MPI_TYPE_VECTOR( nbgp, ngp_yz_int(0), ngp_yz_int(0), MPI_INTEGER,     &
1167                          type_yz_int(0), ierr )
1168    CALL MPI_TYPE_COMMIT( type_yz_int(0), ierr )
1169
1170!
1171!-- Definition of MPI-datatypes for multigrid method (coarser level grids)
1172    IF ( psolver(1:9) == 'multigrid' )  THEN
1173!   
1174!--    Definition of MPI-datatyoe as above, but only 1 ghost level is used
1175       DO  i = maximum_grid_level, 1 , -1
1176!
1177!--       For 3D-exchange on different multigrid level, one ghost point for
1178!--       REAL arrays, two ghost points for INTEGER arrays
1179          ngp_xz(i) = (nzt_l - nzb_l + 2) * (nxr_l - nxl_l + 3)
1180          ngp_yz(i) = (nzt_l - nzb_l + 2) * (nyn_l - nys_l + 3)
1181
1182          ngp_xz_int(i) = (nzt_l - nzb_l + 2) * (nxr_l - nxl_l + 3)
1183          ngp_yz_int(i) = (nzt_l - nzb_l + 2) * (nyn_l - nys_l + 3)
1184!
1185!--       MPI data type for REAL arrays, for xz-layers
1186          CALL MPI_TYPE_VECTOR( nxr_l-nxl_l+3, nzt_l-nzb_l+2, ngp_yz(i),       &
1187                                MPI_REAL, type_xz(i), ierr )
1188          CALL MPI_TYPE_COMMIT( type_xz(i), ierr )
1189
1190!
1191!--       MPI data type for INTEGER arrays, for xz-layers
1192          CALL MPI_TYPE_VECTOR( nxr_l-nxl_l+3, nzt_l-nzb_l+2, ngp_yz_int(i),   &
1193                                MPI_INTEGER, type_xz_int(i), ierr )
1194          CALL MPI_TYPE_COMMIT( type_xz_int(i), ierr )
1195
1196!
1197!--       MPI data type for REAL arrays, for yz-layers
1198          CALL MPI_TYPE_VECTOR( 1, ngp_yz(i), ngp_yz(i), MPI_REAL, type_yz(i), &
1199                                ierr )
1200          CALL MPI_TYPE_COMMIT( type_yz(i), ierr )
1201!
1202!--       MPI data type for INTEGER arrays, for yz-layers
1203          CALL MPI_TYPE_VECTOR( 1, ngp_yz_int(i), ngp_yz_int(i), MPI_INTEGER,  &
1204                                type_yz_int(i), ierr )
1205          CALL MPI_TYPE_COMMIT( type_yz_int(i), ierr )
1206
1207
1208!--       For 2D-exchange of INTEGER arrays on coarser grid level, where 2 ghost
1209!--       points need to be exchanged.
1210          CALL MPI_TYPE_VECTOR( nxr_l-nxl_l+5, 2, nyn_l-nys_l+5, MPI_INTEGER,          &
1211                                type_x_int(i), ierr )
1212          CALL MPI_TYPE_COMMIT( type_x_int(i), ierr )
1213
1214
1215          CALL MPI_TYPE_VECTOR( 2, nyn_l-nys_l+5, nyn_l-nys_l+5, MPI_INTEGER,          &
1216                                type_y_int(i), ierr )
1217          CALL MPI_TYPE_COMMIT( type_y_int(i), ierr )
1218
1219          nxl_l = nxl_l / 2
1220          nxr_l = nxr_l / 2
1221          nys_l = nys_l / 2
1222          nyn_l = nyn_l / 2
1223          nzt_l = nzt_l / 2
1224
1225       ENDDO
1226
1227    ENDIF
1228
1229#endif
1230
1231#if defined( __parallel )
1232!
1233!-- Setting of flags for inflow/outflow/nesting conditions.
1234    IF ( pleft == MPI_PROC_NULL )  THEN
1235       IF ( bc_lr == 'dirichlet/radiation'  .OR.  bc_lr == 'nested'  .OR.      &
1236            bc_lr == 'nesting_offline' )  THEN
1237          bc_dirichlet_l  = .TRUE.
1238       ELSEIF ( bc_lr == 'radiation/dirichlet' )  THEN
1239          bc_radiation_l = .TRUE.
1240       ENDIF
1241    ENDIF
1242 
1243    IF ( pright == MPI_PROC_NULL )  THEN
1244       IF ( bc_lr == 'dirichlet/radiation' )  THEN
1245          bc_radiation_r = .TRUE.
1246       ELSEIF ( bc_lr == 'radiation/dirichlet'  .OR.  bc_lr == 'nested'  .OR.  &
1247                bc_lr == 'nesting_offline' )  THEN
1248          bc_dirichlet_r  = .TRUE.
1249       ENDIF
1250    ENDIF
1251
1252    IF ( psouth == MPI_PROC_NULL )  THEN
1253       IF ( bc_ns == 'dirichlet/radiation' )  THEN
1254          bc_radiation_s = .TRUE.
1255       ELSEIF ( bc_ns == 'radiation/dirichlet'  .OR.  bc_ns == 'nested'  .OR.  &
1256                bc_ns == 'nesting_offline' )  THEN
1257          bc_dirichlet_s  = .TRUE.
1258       ENDIF
1259    ENDIF
1260
1261    IF ( pnorth == MPI_PROC_NULL )  THEN
1262       IF ( bc_ns == 'dirichlet/radiation'  .OR.  bc_ns == 'nested'  .OR.      &
1263            bc_ns == 'nesting_offline' )  THEN
1264          bc_dirichlet_n  = .TRUE.
1265       ELSEIF ( bc_ns == 'radiation/dirichlet' )  THEN
1266          bc_radiation_n = .TRUE.
1267       ENDIF
1268    ENDIF
1269!
1270!-- In case of synthetic turbulence geneartor determine ids.
1271!-- Please note, if no forcing or nesting is applied, the generator is applied
1272!-- only at the left lateral boundary.
1273    IF ( use_syn_turb_gen )  THEN
1274       IF ( bc_dirichlet_l )  THEN
1275          id_stg_left_l = myidx
1276       ELSE
1277          id_stg_left_l = 0
1278       ENDIF
1279       IF ( bc_dirichlet_r )  THEN
1280          id_stg_right_l = myidx
1281       ELSE
1282          id_stg_right_l = 0
1283       ENDIF
1284       IF ( bc_dirichlet_s )  THEN
1285          id_stg_south_l = myidy
1286       ELSE
1287          id_stg_south_l = 0
1288       ENDIF
1289       IF ( bc_dirichlet_n )  THEN
1290          id_stg_north_l = myidy
1291       ELSE
1292          id_stg_north_l = 0
1293       ENDIF
1294
1295       IF ( collective_wait )  CALL MPI_BARRIER( comm2d, ierr )
1296       CALL MPI_ALLREDUCE( id_stg_left_l, id_stg_left,   1, MPI_INTEGER,       &
1297                           MPI_SUM, comm1dx, ierr )
1298
1299       IF ( collective_wait )  CALL MPI_BARRIER( comm2d, ierr )
1300       CALL MPI_ALLREDUCE( id_stg_right_l, id_stg_right, 1, MPI_INTEGER,       &
1301                           MPI_SUM, comm1dx, ierr )
1302
1303       IF ( collective_wait )  CALL MPI_BARRIER( comm2d, ierr )
1304       CALL MPI_ALLREDUCE( id_stg_south_l, id_stg_south, 1, MPI_INTEGER,       &
1305                           MPI_SUM, comm1dy, ierr )
1306
1307       IF ( collective_wait )  CALL MPI_BARRIER( comm2d, ierr )
1308       CALL MPI_ALLREDUCE( id_stg_north_l, id_stg_north, 1, MPI_INTEGER,       &
1309                           MPI_SUM, comm1dy, ierr )
1310
1311    ENDIF 
1312 
1313!
1314!-- Broadcast the id of the inflow PE
1315    IF ( bc_dirichlet_l )  THEN
1316       id_inflow_l = myidx
1317    ELSE
1318       id_inflow_l = 0
1319    ENDIF
1320    IF ( collective_wait )  CALL MPI_BARRIER( comm2d, ierr )
1321    CALL MPI_ALLREDUCE( id_inflow_l, id_inflow, 1, MPI_INTEGER, MPI_SUM, &
1322                        comm1dx, ierr )
1323
1324!
1325!-- Broadcast the id of the recycling plane
1326!-- WARNING: needs to be adjusted in case of inflows other than from left side!
1327    IF ( NINT( recycling_width / dx ) >= nxl  .AND. &
1328         NINT( recycling_width / dx ) <= nxr )  THEN
1329       id_recycling_l = myidx
1330    ELSE
1331       id_recycling_l = 0
1332    ENDIF
1333    IF ( collective_wait )  CALL MPI_BARRIER( comm2d, ierr )
1334    CALL MPI_ALLREDUCE( id_recycling_l, id_recycling, 1, MPI_INTEGER, MPI_SUM, &
1335                        comm1dx, ierr )
1336
1337!
1338!-- Broadcast the id of the outflow PE and outflow-source plane
1339    IF ( turbulent_outflow )  THEN
1340
1341       IF ( bc_radiation_r )  THEN
1342          id_outflow_l = myidx
1343       ELSE
1344          id_outflow_l = 0
1345       ENDIF
1346       IF ( collective_wait )  CALL MPI_BARRIER( comm2d, ierr )
1347       CALL MPI_ALLREDUCE( id_outflow_l, id_outflow, 1, MPI_INTEGER, MPI_SUM, &
1348                           comm1dx, ierr )
1349
1350       IF ( NINT( outflow_source_plane / dx ) >= nxl  .AND. &
1351            NINT( outflow_source_plane / dx ) <= nxr )  THEN
1352          id_outflow_source_l = myidx
1353       ELSE
1354          id_outflow_source_l = 0
1355       ENDIF
1356       IF ( collective_wait )  CALL MPI_BARRIER( comm2d, ierr )
1357       CALL MPI_ALLREDUCE( id_outflow_source_l, id_outflow_source, 1, &
1358                           MPI_INTEGER, MPI_SUM, comm1dx, ierr )
1359
1360    ENDIF
1361
1362    CALL location_message( 'finished', .TRUE. )
1363
1364#else
1365    IF ( bc_lr == 'dirichlet/radiation' )  THEN
1366       bc_dirichlet_l = .TRUE.
1367       bc_radiation_r = .TRUE.
1368    ELSEIF ( bc_lr == 'radiation/dirichlet' )  THEN
1369       bc_radiation_l = .TRUE.
1370       bc_dirichlet_r = .TRUE.
1371    ENDIF
1372
1373    IF ( bc_ns == 'dirichlet/radiation' )  THEN
1374       bc_dirichlet_n = .TRUE.
1375       bc_radiation_s = .TRUE.
1376    ELSEIF ( bc_ns == 'radiation/dirichlet' )  THEN
1377       bc_radiation_n = .TRUE.
1378       bc_dirichlet_s = .TRUE.
1379    ENDIF
1380#endif
1381
1382!
1383!-- At the inflow or outflow, u or v, respectively, have to be calculated for
1384!-- one more grid point.
1385    IF ( bc_dirichlet_l  .OR.  bc_radiation_l )  THEN
1386       nxlu = nxl + 1
1387    ELSE
1388       nxlu = nxl
1389    ENDIF
1390    IF ( bc_dirichlet_s  .OR.  bc_radiation_s )  THEN
1391       nysv = nys + 1
1392    ELSE
1393       nysv = nys
1394    ENDIF
1395
1396!
1397!-- Allocate wall flag arrays used in the multigrid solver
1398    IF ( psolver(1:9) == 'multigrid' )  THEN
1399
1400       DO  i = maximum_grid_level, 1, -1
1401
1402           SELECT CASE ( i )
1403
1404              CASE ( 1 )
1405                 ALLOCATE( wall_flags_1(nzb:nzt_mg(i)+1,         &
1406                                        nys_mg(i)-1:nyn_mg(i)+1, &
1407                                        nxl_mg(i)-1:nxr_mg(i)+1) )
1408
1409              CASE ( 2 )
1410                 ALLOCATE( wall_flags_2(nzb:nzt_mg(i)+1,         &
1411                                        nys_mg(i)-1:nyn_mg(i)+1, &
1412                                        nxl_mg(i)-1:nxr_mg(i)+1) )
1413
1414              CASE ( 3 )
1415                 ALLOCATE( wall_flags_3(nzb:nzt_mg(i)+1,         &
1416                                        nys_mg(i)-1:nyn_mg(i)+1, &
1417                                        nxl_mg(i)-1:nxr_mg(i)+1) )
1418
1419              CASE ( 4 )
1420                 ALLOCATE( wall_flags_4(nzb:nzt_mg(i)+1,         &
1421                                        nys_mg(i)-1:nyn_mg(i)+1, &
1422                                        nxl_mg(i)-1:nxr_mg(i)+1) )
1423
1424              CASE ( 5 )
1425                 ALLOCATE( wall_flags_5(nzb:nzt_mg(i)+1,         &
1426                                        nys_mg(i)-1:nyn_mg(i)+1, &
1427                                        nxl_mg(i)-1:nxr_mg(i)+1) )
1428
1429              CASE ( 6 )
1430                 ALLOCATE( wall_flags_6(nzb:nzt_mg(i)+1,         &
1431                                        nys_mg(i)-1:nyn_mg(i)+1, &
1432                                        nxl_mg(i)-1:nxr_mg(i)+1) )
1433
1434              CASE ( 7 )
1435                 ALLOCATE( wall_flags_7(nzb:nzt_mg(i)+1,         &
1436                                        nys_mg(i)-1:nyn_mg(i)+1, &
1437                                        nxl_mg(i)-1:nxr_mg(i)+1) )
1438
1439              CASE ( 8 )
1440                 ALLOCATE( wall_flags_8(nzb:nzt_mg(i)+1,         &
1441                                        nys_mg(i)-1:nyn_mg(i)+1, &
1442                                        nxl_mg(i)-1:nxr_mg(i)+1) )
1443
1444              CASE ( 9 )
1445                 ALLOCATE( wall_flags_9(nzb:nzt_mg(i)+1,         &
1446                                        nys_mg(i)-1:nyn_mg(i)+1, &
1447                                        nxl_mg(i)-1:nxr_mg(i)+1) )
1448
1449              CASE ( 10 )
1450                 ALLOCATE( wall_flags_10(nzb:nzt_mg(i)+1,        &
1451                                        nys_mg(i)-1:nyn_mg(i)+1, &
1452                                        nxl_mg(i)-1:nxr_mg(i)+1) )
1453
1454              CASE DEFAULT
1455                 message_string = 'more than 10 multigrid levels'
1456                 CALL message( 'init_pegrid', 'PA0238', 1, 2, 0, 6, 0 )
1457
1458          END SELECT
1459
1460       ENDDO
1461
1462    ENDIF
1463
1464 END SUBROUTINE init_pegrid
Note: See TracBrowser for help on using the repository browser.