source: palm/trunk/SOURCE/init_pegrid.f90 @ 3118

Last change on this file since 3118 was 3058, checked in by raasch, 6 years ago

bugfix: wrong error number in r3057 revised

  • Property svn:keywords set to Id
File size: 51.8 KB
Line 
1!> @file init_pegrid.f90
2!------------------------------------------------------------------------------!
3! This file is part of the PALM model system.
4!
5! PALM is free software: you can redistribute it and/or modify it under the
6! terms of the GNU General Public License as published by the Free Software
7! Foundation, either version 3 of the License, or (at your option) any later
8! version.
9!
10! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12! A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
13!
14! You should have received a copy of the GNU General Public License along with
15! PALM. If not, see <http://www.gnu.org/licenses/>.
16!
17! Copyright 1997-2018 Leibniz Universitaet Hannover
18!------------------------------------------------------------------------------!
19!
20! Current revisions:
21! ------------------
22!
23!
24! Former revisions:
25! -----------------
26! $Id: init_pegrid.f90 3058 2018-06-05 09:21:14Z knoop $
27! bugfix: wrong error number in r3057 revised
28!
29! 3057 2018-06-05 09:03:41Z raasch
30! bugfix: check that nz is even in case that optimized multigrid is used
31!
32! 3049 2018-05-29 13:52:36Z Giersch
33! Error messages revised
34!
35! 3045 2018-05-28 07:55:41Z Giersch
36! Error messages revised
37!
38! 2938 2018-03-27 15:52:42Z suehring
39! - No checks for domain decomposition in case of turbulence generator
40!  (is done in stg module)
41! - Introduce ids to indicate lateral processors for turbulence generator
42!
43! 2936 2018-03-27 14:49:27Z suehring
44! Variable use_synthetic_turbulence_generator has been abbreviated
45!
46! 2718 2018-01-02 08:49:38Z maronga
47! Corrected "Former revisions" section
48!
49! 2696 2017-12-14 17:12:51Z kanani
50! Change in file header (GPL part)
51! 3D-Integer exchange on multigrid level (MS)
52! Forcing implemented (MS)
53!
54! 2600 2017-11-01 14:11:20Z raasch
55! calculation of block-I/O quantitites removed (is now done in parin)
56!
57! 2516 2017-10-04 11:03:04Z suehring
58! Remove tabs
59!
60! 2514 2017-10-04 09:52:37Z suehring
61! Redundant preprocessor directives removed
62!
63! 2372 2017-08-25 12:37:32Z sward
64! Shifted cyclic boundary conditions implemented
65!
66! 2365 2017-08-21 14:59:59Z kanani
67! Vertical nesting implemented (SadiqHuq)
68!
69! 2300 2017-06-29 13:31:14Z raasch
70! host-specific settings removed
71!
72! 2298 2017-06-29 09:28:18Z raasch
73! MPI2 related parts removed
74!
75! 2271 2017-06-09 12:34:55Z sward
76! Error message changed
77!
78! 2259 2017-06-08 09:09:11Z gronemeier
79! Implemented synthetic turbulence generator
80!
81! 2238 2017-05-31 16:49:16Z suehring
82! Remove unnecessary module load of pmc_interface
83!
84! 2231 2017-05-30 16:44:33Z suehring
85!
86! 2200 2017-04-11 11:37:51Z suehring
87! monotonic_adjustment removed
88!
89! 2197 2017-03-24 02:25:00Z raasch
90! bugfix: do not allow odd values for nz at the coarsest grid level in case of
91! optimized multigrid solver
92!
93! 2180 2017-03-17 13:33:05Z hellstea
94! Checks to ensure (2178) that pdims match the grid dimensions in the
95! automatic determination of pdims are canceled as unnecessary
96!
97! 2178 2017-03-17 11:07:39Z hellstea
98! Checks to ensure that pdims match the grid dimensions are added in the
99! automatic determination of pdims
100!
101! 2050 2016-11-08 15:00:55Z gronemeier
102! Implement turbulent outflow condition
103!
104! 2000 2016-08-20 18:09:15Z knoop
105! Forced header and separation lines into 80 columns
106!
107! 1968 2016-07-18 12:01:49Z suehring
108! Extent MPI-datatypes for exchange of 2D-INTEGER arrays on coarser multigrid
109! level 
110!
111! 1964 2016-07-14 15:35:18Z hellstea
112! Bugfix: erroneous setting of nest_bound_l/r/s/n = .TRUE. for vertical nesting mode removed.
113!
114! 1923 2016-05-31 16:37:07Z boeske
115! Initial version of purely vertical nesting introduced.
116!
117! 1922 2016-05-31 16:36:08Z boeske
118! Bugfix: array transposition checks restricted to cases if a fourier
119! transform is used , removed unused variable nnx_z
120!
121! 1833 2016-04-07 14:23:03Z raasch
122! spectra related variables moved to spectra_mod
123!
124! 1815 2016-04-06 13:49:59Z raasch
125! cpp-directives for intel openmp bug removed
126!
127! 1804 2016-04-05 16:30:18Z maronga
128! Removed code for parameter file check (__check)
129!
130! 1779 2016-03-03 08:01:28Z raasch
131! changes regarding nested domain removed: virtual PE grid will be automatically
132! calculated for nested runs too
133!
134! 1764 2016-02-28 12:45:19Z raasch
135! cpp-statements for nesting removed
136!
137! 1762 2016-02-25 12:31:13Z hellstea
138! Introduction of nested domain feature
139!
140! 1682 2015-10-07 23:56:08Z knoop
141! Code annotations made doxygen readable
142!
143! 1677 2015-10-02 13:25:23Z boeske
144! New MPI-data types for exchange of 3D integer arrays.
145!
146! 1575 2015-03-27 09:56:27Z raasch
147! adjustments for psolver-queries, calculation of ngp_xz added
148!
149! 1565 2015-03-09 20:59:31Z suehring
150! Refine if-clause for setting nbgp.
151!
152! 1557 2015-03-05 16:43:04Z suehring
153! Adjustment for monotonic limiter
154!
155! 1468 2014-09-24 14:06:57Z maronga
156! Adapted for use on up to 6-digit processor cores
157!
158! 1435 2014-07-21 10:37:02Z keck
159! bugfix: added missing parameter coupling_mode_remote to ONLY-attribute
160!
161! 1402 2014-05-09 14:25:13Z raasch
162! location messages modified
163!
164! 1384 2014-05-02 14:31:06Z raasch
165! location messages added
166!
167! 1353 2014-04-08 15:21:23Z heinze
168! REAL constants provided with KIND-attribute
169!
170! 1322 2014-03-20 16:38:49Z raasch
171! REAL functions provided with KIND-attribute
172!
173! 1320 2014-03-20 08:40:49Z raasch
174! ONLY-attribute added to USE-statements,
175! kind-parameters added to all INTEGER and REAL declaration statements,
176! kinds are defined in new module kinds,
177! revision history before 2012 removed,
178! comment fields (!:) to be used for variable explanations added to
179! all variable declaration statements
180!
181! 1304 2014-03-12 10:29:42Z raasch
182! bugfix: single core MPI runs missed some settings of transpose indices
183!
184! 1212 2013-08-15 08:46:27Z raasch
185! error message for poisfft_hybrid removed
186!
187! 1159 2013-05-21 11:58:22Z fricke
188! dirichlet/neumann and neumann/dirichlet removed
189!
190! 1139 2013-04-18 07:25:03Z raasch
191! bugfix for calculating the id of the PE carrying the recycling plane
192!
193! 1111 2013-03-08 23:54:10Z raasch
194! initialization of poisfft moved to module poisfft
195!
196! 1092 2013-02-02 11:24:22Z raasch
197! unused variables removed
198!
199! 1056 2012-11-16 15:28:04Z raasch
200! Indices for arrays n.._mg start from zero due to definition of arrays f2 and
201! p2 as automatic arrays in recursive subroutine next_mg_level
202!
203! 1041 2012-11-06 02:36:29Z raasch
204! a 2d virtual processor topology is used by default for all machines
205!
206! 1036 2012-10-22 13:43:42Z raasch
207! code put under GPL (PALM 3.9)
208!
209! 1003 2012-09-14 14:35:53Z raasch
210! subdomains must have identical size (grid matching = "match" removed)
211!
212! 1001 2012-09-13 14:08:46Z raasch
213! all actions concerning upstream-spline-method removed
214!
215! 978 2012-08-09 08:28:32Z fricke
216! dirichlet/neumann and neumann/dirichlet added
217! nxlu and nysv are also calculated for inflow boundary
218!
219! 809 2012-01-30 13:32:58Z maronga
220! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
221!
222! 807 2012-01-25 11:53:51Z maronga
223! New cpp directive "__check" implemented which is used by check_namelist_files
224!
225! Revision 1.1  1997/07/24 11:15:09  raasch
226! Initial revision
227!
228!
229! Description:
230! ------------
231!> Determination of the virtual processor topology (if not prescribed by the
232!> user)and computation of the grid point number and array bounds of the local
233!> domains.
234!> @todo: remove MPI-data types for 2D exchange on coarse multigrid level (not
235!>        used any more)
236!------------------------------------------------------------------------------!
237 SUBROUTINE init_pegrid
238 
239
240    USE control_parameters,                                                    &
241        ONLY:  bc_lr, bc_ns, coupling_mode, coupling_mode_remote,              &
242               coupling_topology, force_bound_l, force_bound_n, force_bound_r, &
243               force_bound_s, gathered_size, grid_level,                       &
244               grid_level_count, inflow_l, inflow_n, inflow_r, inflow_s,       &
245               maximum_grid_level, message_string,                             &
246               mg_switch_to_pe0_level, momentum_advec, nest_bound_l,           &
247               nest_bound_n, nest_bound_r, nest_bound_s, nest_domain, neutral, &
248               psolver, outflow_l, outflow_n, outflow_r, outflow_s,            &
249               outflow_source_plane, recycling_width, scalar_advec,            &
250               subdomain_size, turbulent_outflow, y_shift
251
252    USE grid_variables,                                                        &
253        ONLY:  dx
254       
255    USE indices,                                                               &
256        ONLY:  mg_loc_ind, nbgp, nnx, nny, nnz, nx, nx_a, nx_o, nxl, nxl_mg,   &
257               nxlu, nxr, nxr_mg, ny, ny_a, ny_o, nyn, nyn_mg, nys, nys_mg,    &
258               nysv, nz, nzb, nzt, nzt_mg, wall_flags_1, wall_flags_2,         &
259               wall_flags_3, wall_flags_4, wall_flags_5, wall_flags_6,         &
260               wall_flags_7, wall_flags_8, wall_flags_9, wall_flags_10
261
262    USE kinds
263     
264    USE pegrid
265     
266    USE spectra_mod,                                                           &
267        ONLY:  calculate_spectra, dt_dosp
268
269    USE synthetic_turbulence_generator_mod,                                    &
270        ONLY:  id_stg_left, id_stg_north, id_stg_right, id_stg_south,          &
271               use_syn_turb_gen
272
273    USE transpose_indices,                                                     &
274        ONLY:  nxl_y, nxl_yd, nxl_z, nxr_y, nxr_yd, nxr_z, nyn_x, nyn_z, nys_x,&
275               nys_z, nzb_x, nzb_y, nzb_yd, nzt_x, nzt_yd, nzt_y
276
277    USE vertical_nesting_mod,                                                  &
278        ONLY:  vnested, vnest_init_pegrid_domain, vnest_init_pegrid_rank
279
280    IMPLICIT NONE
281
282    INTEGER(iwp) ::  i                        !<
283    INTEGER(iwp) ::  id_inflow_l              !<
284    INTEGER(iwp) ::  id_outflow_l             !< local value of id_outflow
285    INTEGER(iwp) ::  id_outflow_source_l      !< local value of id_outflow_source
286    INTEGER(iwp) ::  id_recycling_l           !<
287    INTEGER(iwp) ::  id_stg_left_l            !< left lateral boundary local core id in case of turbulence generator 
288    INTEGER(iwp) ::  id_stg_north_l           !< north lateral boundary local core id in case of turbulence generator 
289    INTEGER(iwp) ::  id_stg_right_l           !< right lateral boundary local core id in case of turbulence generator 
290    INTEGER(iwp) ::  id_stg_south_l           !< south lateral boundary local core id in case of turbulence generator 
291    INTEGER(iwp) ::  ind(5)                   !<
292    INTEGER(iwp) ::  j                        !<
293    INTEGER(iwp) ::  k                        !<
294    INTEGER(iwp) ::  maximum_grid_level_l     !<
295    INTEGER(iwp) ::  mg_levels_x              !<
296    INTEGER(iwp) ::  mg_levels_y              !<
297    INTEGER(iwp) ::  mg_levels_z              !<
298    INTEGER(iwp) ::  mg_switch_to_pe0_level_l !<
299    INTEGER(iwp) ::  nnx_y                    !<
300    INTEGER(iwp) ::  nnx_z                    !<
301    INTEGER(iwp) ::  nny_x                    !<
302    INTEGER(iwp) ::  nny_z                    !<
303    INTEGER(iwp) ::  nnz_x                    !<
304    INTEGER(iwp) ::  nnz_y                    !<
305    INTEGER(iwp) ::  numproc_sqr              !<
306    INTEGER(iwp) ::  nxl_l                    !<
307    INTEGER(iwp) ::  nxr_l                    !<
308    INTEGER(iwp) ::  nyn_l                    !<
309    INTEGER(iwp) ::  nys_l                    !<
310    INTEGER(iwp) ::  nzb_l                    !<
311    INTEGER(iwp) ::  nzt_l                    !<
312    INTEGER(iwp) ::  omp_get_num_threads      !<
313
314    INTEGER(iwp), DIMENSION(:), ALLOCATABLE ::  ind_all !<
315    INTEGER(iwp), DIMENSION(:), ALLOCATABLE ::  nxlf    !<
316    INTEGER(iwp), DIMENSION(:), ALLOCATABLE ::  nxrf    !<
317    INTEGER(iwp), DIMENSION(:), ALLOCATABLE ::  nynf    !<
318    INTEGER(iwp), DIMENSION(:), ALLOCATABLE ::  nysf    !<
319
320    INTEGER(iwp), DIMENSION(2) ::  pdims_remote         !<
321    INTEGER(iwp)               ::  lcoord(2)            !< PE coordinates of left neighbor along x and y
322    INTEGER(iwp)               ::  rcoord(2)            !< PE coordinates of right neighbor along x and y
323
324!
325!-- Get the number of OpenMP threads
326    !$OMP PARALLEL
327!$  threads_per_task = omp_get_num_threads()
328    !$OMP END PARALLEL
329
330
331#if defined( __parallel )
332
333    CALL location_message( 'creating virtual PE grids + MPI derived data types', &
334                           .FALSE. )
335
336!
337!-- Determine the processor topology or check it, if prescribed by the user
338    IF ( npex == -1  .AND.  npey == -1 )  THEN
339
340!
341!--    Automatic determination of the topology
342       numproc_sqr = SQRT( REAL( numprocs, KIND=wp ) )
343       pdims(1)    = MAX( numproc_sqr , 1 )
344       DO  WHILE ( MOD( numprocs , pdims(1) ) /= 0 )
345          pdims(1) = pdims(1) - 1
346       ENDDO
347       pdims(2) = numprocs / pdims(1)
348
349    ELSEIF ( npex /= -1  .AND.  npey /= -1 )  THEN
350
351!
352!--    Prescribed by user. Number of processors on the prescribed topology
353!--    must be equal to the number of PEs available to the job
354       IF ( ( npex * npey ) /= numprocs )  THEN
355          WRITE( message_string, * ) 'number of PEs of the prescribed ',       &
356              'topology (', npex*npey,') does not match & the number of ',     &
357              'PEs available to the job (', numprocs, ')'
358          CALL message( 'init_pegrid', 'PA0221', 1, 2, 0, 6, 0 )
359       ENDIF
360       pdims(1) = npex
361       pdims(2) = npey
362
363    ELSE
364!
365!--    If the processor topology is prescribed by the user, the number of
366!--    PEs must be given in both directions
367       message_string = 'if the processor topology is prescribed by th' //     &
368                'e user & both values of "npex" and "npey" must be given' //   &
369                ' in the &NAMELIST-parameter file'
370       CALL message( 'init_pegrid', 'PA0222', 1, 2, 0, 6, 0 )
371
372    ENDIF
373
374!
375!-- If necessary, set horizontal boundary conditions to non-cyclic
376    IF ( bc_lr /= 'cyclic' )  cyclic(1) = .FALSE.
377    IF ( bc_ns /= 'cyclic' )  cyclic(2) = .FALSE.
378
379
380!
381!-- Create the virtual processor grid
382    CALL MPI_CART_CREATE( comm_palm, ndim, pdims, cyclic, reorder, &
383                          comm2d, ierr )
384    CALL MPI_COMM_RANK( comm2d, myid, ierr )
385    WRITE (myid_char,'(''_'',I6.6)')  myid
386
387    CALL MPI_CART_COORDS( comm2d, myid, ndim, pcoord, ierr )
388    CALL MPI_CART_SHIFT( comm2d, 0, 1, pleft, pright, ierr )
389    CALL MPI_CART_SHIFT( comm2d, 1, 1, psouth, pnorth, ierr )
390!
391!-- In case of cyclic boundary conditions, a y-shift at the boundaries in
392!-- x-direction can be introduced via parameter y_shift. The shift is done
393!-- by modifying the processor grid in such a way that processors located
394!-- at the x-boundary communicate across it to processors with y-coordinate
395!-- shifted by y_shift relative to their own. This feature can not be used
396!-- in combination with an fft pressure solver. It has been implemented to
397!-- counter the effect of streak structures in case of cyclic boundary
398!-- conditions. For a description of these see Munters
399!-- (2016; dx.doi.org/10.1063/1.4941912)
400!--
401!-- Get coordinates of left and right neighbor on PE grid
402    IF ( y_shift /= 0 ) THEN
403
404       IF ( bc_lr /= 'cyclic'  .OR.  bc_ns /= 'cyclic' )  THEN
405          message_string = 'y_shift /= 0 is only allowed for cyclic ' //       &
406                           'boundary conditions in both directions '
407          CALL message( 'check_parameters', 'PA0467', 1, 2, 0, 6, 0 )
408       ENDIF
409       IF ( TRIM( psolver ) /= 'multigrid' .AND.                               &
410            TRIM( psolver ) /= 'multigrid_noopt')                              &
411       THEN
412          message_string = 'y_shift /= 0 requires a multigrid pressure solver '
413          CALL message( 'check_parameters', 'PA0468', 1, 2, 0, 6, 0 )
414       ENDIF
415
416       CALL MPI_CART_COORDS( comm2d, pright, ndim, rcoord, ierr )
417       CALL MPI_CART_COORDS( comm2d, pleft, ndim, lcoord, ierr )
418
419!
420!--    If the x(y)-coordinate of the right (left) neighbor is smaller (greater)
421!--    than that of the calling process, then the calling process is located on
422!--    the right (left) boundary of the processor grid. In that case,
423!--    the y-coordinate of that neighbor is increased (decreased) by y_shift.
424!--    The rank of the process with that coordinate is then inquired and the
425!--    neighbor rank for MPI_SENDRECV, pright (pleft) is set to it.
426!--    In this way, the calling process receives a new right (left) neighbor
427!--    for all future MPI_SENDRECV calls. That neighbor has a y-coordinate
428!--    of y+(-)y_shift, where y is the original right (left) neighbor's
429!--    y-coordinate. The modulo-operation ensures that if the neighbor's
430!--    y-coordinate exceeds the grid-boundary, it will be relocated to
431!--    the opposite part of the grid cyclicly.
432       IF ( rcoord(1) < pcoord(1) ) THEN
433          rcoord(2) = MODULO( rcoord(2) + y_shift, pdims(2) )
434          CALL MPI_CART_RANK( comm2d, rcoord, pright, ierr )
435       ENDIF
436
437       IF ( lcoord(1) > pcoord(1) ) THEN
438          lcoord(2) = MODULO( lcoord(2) - y_shift, pdims(2) )
439          CALL MPI_CART_RANK( comm2d, lcoord, pleft, ierr )
440       ENDIF
441    ENDIF
442!
443!-- Vertical nesting: store four lists that identify partner ranks to exchange
444!-- data
445    IF ( vnested )  CALL vnest_init_pegrid_rank
446
447!
448!-- Determine sub-topologies for transpositions
449!-- Transposition from z to x:
450    remain_dims(1) = .TRUE.
451    remain_dims(2) = .FALSE.
452    CALL MPI_CART_SUB( comm2d, remain_dims, comm1dx, ierr )
453    CALL MPI_COMM_RANK( comm1dx, myidx, ierr )
454!
455!-- Transposition from x to y
456    remain_dims(1) = .FALSE.
457    remain_dims(2) = .TRUE.
458    CALL MPI_CART_SUB( comm2d, remain_dims, comm1dy, ierr )
459    CALL MPI_COMM_RANK( comm1dy, myidy, ierr )
460
461
462!
463!-- Calculate array bounds along x-direction for every PE.
464    ALLOCATE( nxlf(0:pdims(1)-1), nxrf(0:pdims(1)-1), nynf(0:pdims(2)-1),      &
465              nysf(0:pdims(2)-1) )
466
467    IF ( MOD( nx+1 , pdims(1) ) /= 0 )  THEN
468       WRITE( message_string, * ) 'x-direction: gridpoint number (',nx+1,') ', &
469                               'is not an& integral divisor of the number ',    &
470                               'of processors (', pdims(1),')'
471       CALL message( 'init_pegrid', 'PA0225', 1, 2, 0, 6, 0 )
472    ELSE
473       nnx  = ( nx + 1 ) / pdims(1)
474    ENDIF   
475
476!
477!-- Left and right array bounds, number of gridpoints
478    DO  i = 0, pdims(1)-1
479       nxlf(i)   = i * nnx
480       nxrf(i)   = ( i + 1 ) * nnx - 1
481    ENDDO
482
483!
484!-- Calculate array bounds in y-direction for every PE.
485    IF ( MOD( ny+1 , pdims(2) ) /= 0 )  THEN
486       WRITE( message_string, * ) 'y-direction: gridpoint number (',ny+1,') ', &
487                           'is not an& integral divisor of the number of',      &
488                           'processors (', pdims(2),')'
489       CALL message( 'init_pegrid', 'PA0227', 1, 2, 0, 6, 0 )
490    ELSE
491       nny  = ( ny + 1 ) / pdims(2)
492    ENDIF   
493
494!
495!-- South and north array bounds
496    DO  j = 0, pdims(2)-1
497       nysf(j)   = j * nny
498       nynf(j)   = ( j + 1 ) * nny - 1
499    ENDDO
500
501!
502!-- Local array bounds of the respective PEs
503    nxl = nxlf(pcoord(1))
504    nxr = nxrf(pcoord(1))
505    nys = nysf(pcoord(2))
506    nyn = nynf(pcoord(2))
507    nzb = 0
508    nzt = nz
509    nnz = nz
510
511!
512!-- Set switches to define if the PE is situated at the border of the virtual
513!-- processor grid
514    IF ( nxl == 0 )   left_border_pe  = .TRUE.
515    IF ( nxr == nx )  right_border_pe = .TRUE.
516    IF ( nys == 0 )   south_border_pe = .TRUE.
517    IF ( nyn == ny )  north_border_pe = .TRUE.
518
519!
520!-- Calculate array bounds and gridpoint numbers for the transposed arrays
521!-- (needed in the pressure solver)
522!-- For the transposed arrays, cyclic boundaries as well as top and bottom
523!-- boundaries are omitted, because they are obstructive to the transposition
524
525!
526!-- 1. transposition  z --> x
527!-- This transposition is not neccessary in case of a 1d-decomposition along x
528    IF ( psolver == 'poisfft'  .OR.  calculate_spectra )  THEN
529
530       IF ( pdims(2) /= 1 )  THEN
531          IF ( MOD( nz , pdims(1) ) /= 0 )  THEN
532             WRITE( message_string, * ) 'transposition z --> x:',              &
533                       '& nz=',nz,' is not an integral divisior of pdims(1)=', &
534                                                                   pdims(1)
535             CALL message( 'init_pegrid', 'PA0230', 1, 2, 0, 6, 0 )
536          ENDIF
537       ENDIF
538
539       nys_x = nys
540       nyn_x = nyn
541       nny_x = nny
542       nnz_x = nz / pdims(1)
543       nzb_x = 1 + myidx * nnz_x
544       nzt_x = ( myidx + 1 ) * nnz_x
545       sendrecvcount_zx = nnx * nny * nnz_x
546
547    ENDIF
548
549
550    IF ( psolver == 'poisfft' )  THEN 
551!
552!--    2. transposition  x --> y
553       IF ( MOD( nx+1 , pdims(2) ) /= 0 )  THEN
554          WRITE( message_string, * ) 'transposition x --> y:',                 &
555                            '& nx+1=',nx+1,' is not an integral divisor of ',  &
556                            'pdims(2)=',pdims(2)
557          CALL message( 'init_pegrid', 'PA0231', 1, 2, 0, 6, 0 )
558       ENDIF
559
560       nnz_y = nnz_x
561       nzb_y = nzb_x
562       nzt_y = nzt_x
563       nnx_y = (nx+1) / pdims(2)
564       nxl_y = myidy * nnx_y
565       nxr_y = ( myidy + 1 ) * nnx_y - 1
566       sendrecvcount_xy = nnx_y * nny_x * nnz_y
567!
568!--    3. transposition  y --> z 
569!--    (ELSE:  x --> y  in case of 1D-decomposition along x)
570       nxl_z = nxl_y
571       nxr_z = nxr_y
572       nny_z = (ny+1) / pdims(1)
573       nys_z = myidx * nny_z
574       nyn_z = ( myidx + 1 ) * nny_z - 1
575       sendrecvcount_yz = nnx_y * nny_z * nnz_y
576
577       IF ( pdims(2) /= 1 )  THEN
578!
579!--       y --> z
580!--       This transposition is not neccessary in case of a 1d-decomposition
581!--       along x, except that the uptream-spline method is switched on
582          IF ( MOD( ny+1 , pdims(1) ) /= 0 )  THEN
583             WRITE( message_string, * ) 'transposition y --> z:',              &
584                               '& ny+1=',ny+1,' is not an integral divisor of',&
585                               ' pdims(1)=',pdims(1)
586             CALL message( 'init_pegrid', 'PA0232', 1, 2, 0, 6, 0 )
587          ENDIF
588
589       ELSE
590!
591!--       x --> y
592!--       This condition must be fulfilled for a 1D-decomposition along x
593          IF ( MOD( ny+1 , pdims(1) ) /= 0 )  THEN
594             WRITE( message_string, * ) 'transposition x --> y:',              &
595                               '& ny+1=',ny+1,' is not an integral divisor of',&
596                               ' pdims(1)=',pdims(1)
597             CALL message( 'init_pegrid', 'PA0233', 1, 2, 0, 6, 0 )
598          ENDIF
599
600       ENDIF
601
602    ENDIF
603
604!
605!-- Indices for direct transpositions z --> y (used for calculating spectra)
606    IF ( calculate_spectra )  THEN
607       IF ( MOD( nz, pdims(2) ) /= 0 )  THEN
608          WRITE( message_string, * ) 'direct transposition z --> y (needed ',  &
609                    'for spectra): nz=',nz,' is not an integral divisor of ',  &
610                    'pdims(2)=',pdims(2)
611          CALL message( 'init_pegrid', 'PA0234', 1, 2, 0, 6, 0 )
612       ELSE
613          nxl_yd = nxl
614          nxr_yd = nxr
615          nzb_yd = 1 + myidy * ( nz / pdims(2) )
616          nzt_yd = ( myidy + 1 ) * ( nz / pdims(2) )
617          sendrecvcount_zyd = nnx * nny * ( nz / pdims(2) )
618       ENDIF
619    ENDIF
620
621    IF ( psolver == 'poisfft'  .OR.  calculate_spectra )  THEN
622!
623!--    Indices for direct transpositions y --> x
624!--    (they are only possible in case of a 1d-decomposition along x)
625       IF ( pdims(2) == 1 )  THEN
626          nny_x = nny / pdims(1)
627          nys_x = myid * nny_x
628          nyn_x = ( myid + 1 ) * nny_x - 1
629          nzb_x = 1
630          nzt_x = nz
631          sendrecvcount_xy = nnx * nny_x * nz
632       ENDIF
633
634    ENDIF
635
636    IF ( psolver == 'poisfft' )  THEN
637!
638!--    Indices for direct transpositions x --> y
639!--    (they are only possible in case of a 1d-decomposition along y)
640       IF ( pdims(1) == 1 )  THEN
641          nnx_y = nnx / pdims(2)
642          nxl_y = myid * nnx_y
643          nxr_y = ( myid + 1 ) * nnx_y - 1
644          nzb_y = 1
645          nzt_y = nz
646          sendrecvcount_xy = nnx_y * nny * nz
647       ENDIF
648
649    ENDIF
650
651!
652!-- Arrays for storing the array bounds are needed any more
653    DEALLOCATE( nxlf , nxrf , nynf , nysf )
654
655
656!
657!-- Collect index bounds from other PEs (to be written to restart file later)
658    ALLOCATE( hor_index_bounds(4,0:numprocs-1) )
659
660    IF ( myid == 0 )  THEN
661
662       hor_index_bounds(1,0) = nxl
663       hor_index_bounds(2,0) = nxr
664       hor_index_bounds(3,0) = nys
665       hor_index_bounds(4,0) = nyn
666
667!
668!--    Receive data from all other PEs
669       DO  i = 1, numprocs-1
670          CALL MPI_RECV( ibuf, 4, MPI_INTEGER, i, MPI_ANY_TAG, comm2d, status, &
671                         ierr )
672          hor_index_bounds(:,i) = ibuf(1:4)
673       ENDDO
674
675    ELSE
676!
677!--    Send index bounds to PE0
678       ibuf(1) = nxl
679       ibuf(2) = nxr
680       ibuf(3) = nys
681       ibuf(4) = nyn
682       CALL MPI_SEND( ibuf, 4, MPI_INTEGER, 0, myid, comm2d, ierr )
683
684    ENDIF
685
686
687#if defined( __print )
688!
689!-- Control output
690    IF ( myid == 0 )  THEN
691       PRINT*, '*** processor topology ***'
692       PRINT*, ' '
693       PRINT*, 'myid   pcoord    left right  south north  idx idy   nxl: nxr',&
694               &'   nys: nyn'
695       PRINT*, '------------------------------------------------------------',&
696               &'-----------'
697       WRITE (*,1000)  0, pcoord(1), pcoord(2), pleft, pright, psouth, pnorth, &
698                       myidx, myidy, nxl, nxr, nys, nyn
6991000   FORMAT (I4,2X,'(',I3,',',I3,')',3X,I4,2X,I4,3X,I4,2X,I4,2X,I3,1X,I3, &
700               2(2X,I4,':',I4))
701
702!
703!--    Receive data from the other PEs
704       DO  i = 1,numprocs-1
705          CALL MPI_RECV( ibuf, 12, MPI_INTEGER, i, MPI_ANY_TAG, comm2d, status, &
706                         ierr )
707          WRITE (*,1000)  i, ( ibuf(j) , j = 1,12 )
708       ENDDO
709    ELSE
710
711!
712!--    Send data to PE0
713       ibuf(1) = pcoord(1); ibuf(2) = pcoord(2); ibuf(3) = pleft
714       ibuf(4) = pright; ibuf(5) = psouth; ibuf(6) = pnorth; ibuf(7) = myidx
715       ibuf(8) = myidy; ibuf(9) = nxl; ibuf(10) = nxr; ibuf(11) = nys
716       ibuf(12) = nyn
717       CALL MPI_SEND( ibuf, 12, MPI_INTEGER, 0, myid, comm2d, ierr )       
718    ENDIF
719#endif
720
721!
722!-- Determine the number of ghost point layers
723    IF ( ( scalar_advec == 'ws-scheme' .AND. .NOT. neutral ) .OR.             &
724         momentum_advec == 'ws-scheme' )  THEN
725       nbgp = 3
726    ELSE
727       nbgp = 1
728    ENDIF 
729
730!
731!-- Create a new MPI derived datatype for the exchange of surface (xy) data,
732!-- which is needed for coupled atmosphere-ocean runs.
733!-- First, calculate number of grid points of an xy-plane.
734    ngp_xy  = ( nxr - nxl + 1 + 2 * nbgp ) * ( nyn - nys + 1 + 2 * nbgp )
735    CALL MPI_TYPE_VECTOR( ngp_xy, 1, nzt-nzb+2, MPI_REAL, type_xy, ierr )
736    CALL MPI_TYPE_COMMIT( type_xy, ierr )
737
738    IF ( TRIM( coupling_mode ) /= 'uncoupled' .AND. .NOT. vnested )  THEN
739   
740!
741!--    Pass the number of grid points of the atmosphere model to
742!--    the ocean model and vice versa
743       IF ( coupling_mode == 'atmosphere_to_ocean' )  THEN
744
745          nx_a = nx
746          ny_a = ny
747
748          IF ( myid == 0 )  THEN
749
750             CALL MPI_SEND( nx_a, 1, MPI_INTEGER, numprocs, 1, comm_inter,  &
751                            ierr )
752             CALL MPI_SEND( ny_a, 1, MPI_INTEGER, numprocs, 2, comm_inter,  &
753                            ierr )
754             CALL MPI_SEND( pdims, 2, MPI_INTEGER, numprocs, 3, comm_inter, &
755                            ierr )
756             CALL MPI_RECV( nx_o, 1, MPI_INTEGER, numprocs, 4, comm_inter,  &
757                            status, ierr )
758             CALL MPI_RECV( ny_o, 1, MPI_INTEGER, numprocs, 5, comm_inter,  &
759                            status, ierr )
760             CALL MPI_RECV( pdims_remote, 2, MPI_INTEGER, numprocs, 6,      &
761                            comm_inter, status, ierr )
762          ENDIF
763
764          CALL MPI_BCAST( nx_o, 1, MPI_INTEGER, 0, comm2d, ierr )
765          CALL MPI_BCAST( ny_o, 1, MPI_INTEGER, 0, comm2d, ierr ) 
766          CALL MPI_BCAST( pdims_remote, 2, MPI_INTEGER, 0, comm2d, ierr )
767       
768       ELSEIF ( coupling_mode == 'ocean_to_atmosphere' )  THEN
769
770          nx_o = nx
771          ny_o = ny 
772
773          IF ( myid == 0 ) THEN
774
775             CALL MPI_RECV( nx_a, 1, MPI_INTEGER, 0, 1, comm_inter, status, &
776                            ierr )
777             CALL MPI_RECV( ny_a, 1, MPI_INTEGER, 0, 2, comm_inter, status, &
778                            ierr )
779             CALL MPI_RECV( pdims_remote, 2, MPI_INTEGER, 0, 3, comm_inter, &
780                            status, ierr )
781             CALL MPI_SEND( nx_o, 1, MPI_INTEGER, 0, 4, comm_inter, ierr )
782             CALL MPI_SEND( ny_o, 1, MPI_INTEGER, 0, 5, comm_inter, ierr )
783             CALL MPI_SEND( pdims, 2, MPI_INTEGER, 0, 6, comm_inter, ierr )
784          ENDIF
785
786          CALL MPI_BCAST( nx_a, 1, MPI_INTEGER, 0, comm2d, ierr)
787          CALL MPI_BCAST( ny_a, 1, MPI_INTEGER, 0, comm2d, ierr) 
788          CALL MPI_BCAST( pdims_remote, 2, MPI_INTEGER, 0, comm2d, ierr) 
789
790       ENDIF
791 
792       ngp_a = ( nx_a+1 + 2 * nbgp ) * ( ny_a+1 + 2 * nbgp )
793       ngp_o = ( nx_o+1 + 2 * nbgp ) * ( ny_o+1 + 2 * nbgp )
794
795!
796!--    Determine if the horizontal grid and the number of PEs in ocean and
797!--    atmosphere is same or not
798       IF ( nx_o == nx_a  .AND.  ny_o == ny_a  .AND.  &
799            pdims(1) == pdims_remote(1) .AND. pdims(2) == pdims_remote(2) ) &
800       THEN
801          coupling_topology = 0
802       ELSE
803          coupling_topology = 1
804       ENDIF 
805
806!
807!--    Determine the target PEs for the exchange between ocean and
808!--    atmosphere (comm2d)
809       IF ( coupling_topology == 0 )  THEN
810!
811!--       In case of identical topologies, every atmosphere PE has exactly one
812!--       ocean PE counterpart and vice versa
813          IF ( TRIM( coupling_mode ) == 'atmosphere_to_ocean' ) THEN
814             target_id = myid + numprocs
815          ELSE
816             target_id = myid 
817          ENDIF
818
819       ELSE
820!
821!--       In case of nonequivalent topology in ocean and atmosphere only for
822!--       PE0 in ocean and PE0 in atmosphere a target_id is needed, since
823!--       data echxchange between ocean and atmosphere will be done only
824!--       between these PEs.   
825          IF ( myid == 0 )  THEN
826
827             IF ( TRIM( coupling_mode ) == 'atmosphere_to_ocean' )  THEN
828                target_id = numprocs 
829             ELSE
830                target_id = 0
831             ENDIF
832
833          ENDIF
834
835       ENDIF
836
837    ENDIF
838
839!
840!-- Store partner grid point co-ordinates as lists.
841!-- Create custom MPI vector datatypes for contiguous data transfer
842    IF ( vnested )  CALL vnest_init_pegrid_domain
843
844#else
845
846!
847!-- Array bounds when running on a single PE (respectively a non-parallel
848!-- machine)
849    nxl = 0
850    nxr = nx
851    nnx = nxr - nxl + 1
852    nys = 0
853    nyn = ny
854    nny = nyn - nys + 1
855    nzb = 0
856    nzt = nz
857    nnz = nz
858
859    ALLOCATE( hor_index_bounds(4,0:0) )
860    hor_index_bounds(1,0) = nxl
861    hor_index_bounds(2,0) = nxr
862    hor_index_bounds(3,0) = nys
863    hor_index_bounds(4,0) = nyn
864
865!
866!-- Array bounds for the pressure solver (in the parallel code, these bounds
867!-- are the ones for the transposed arrays)
868    nys_x = nys
869    nyn_x = nyn
870    nzb_x = nzb + 1
871    nzt_x = nzt
872
873    nxl_y = nxl
874    nxr_y = nxr
875    nzb_y = nzb + 1
876    nzt_y = nzt
877
878    nxl_z = nxl
879    nxr_z = nxr
880    nys_z = nys
881    nyn_z = nyn
882
883#endif
884
885!
886!-- Calculate number of grid levels necessary for the multigrid poisson solver
887!-- as well as the gridpoint indices on each level
888    IF ( psolver(1:9) == 'multigrid' )  THEN
889
890!
891!--    First calculate number of possible grid levels for the subdomains
892       mg_levels_x = 1
893       mg_levels_y = 1
894       mg_levels_z = 1
895
896       i = nnx
897       DO WHILE ( MOD( i, 2 ) == 0  .AND.  i /= 2 )
898          i = i / 2
899          mg_levels_x = mg_levels_x + 1
900       ENDDO
901
902       j = nny
903       DO WHILE ( MOD( j, 2 ) == 0  .AND.  j /= 2 )
904          j = j / 2
905          mg_levels_y = mg_levels_y + 1
906       ENDDO
907
908       k = nz    ! do not use nnz because it might be > nz due to transposition
909                 ! requirements
910       DO WHILE ( MOD( k, 2 ) == 0  .AND.  k /= 2 )
911          k = k / 2
912          mg_levels_z = mg_levels_z + 1
913       ENDDO
914!
915!--    The optimized MG-solver does not allow odd values for nz at the coarsest
916!--    grid level
917       IF ( TRIM( psolver ) /= 'multigrid_noopt' )  THEN
918          IF ( MOD( k, 2 ) /= 0 )  mg_levels_z = mg_levels_z - 1
919!
920!--       An odd value of nz does not work. The finest level must have an even
921!--       value.
922          IF (  mg_levels_z == 0 )  THEN
923             message_string = 'optimized multigrid method requires nz to be even'
924             CALL message( 'init_pegrid', 'PA0495', 1, 2, 0, 6, 0 )
925          ENDIF
926       ENDIF
927
928       maximum_grid_level = MIN( mg_levels_x, mg_levels_y, mg_levels_z )
929
930!
931!--    Find out, if the total domain allows more levels. These additional
932!--    levels are identically processed on all PEs.
933       IF ( numprocs > 1  .AND.  mg_switch_to_pe0_level /= -1 )  THEN
934
935          IF ( mg_levels_z > MIN( mg_levels_x, mg_levels_y ) )  THEN
936
937             mg_switch_to_pe0_level_l = maximum_grid_level
938
939             mg_levels_x = 1
940             mg_levels_y = 1
941
942             i = nx+1
943             DO WHILE ( MOD( i, 2 ) == 0  .AND.  i /= 2 )
944                i = i / 2
945                mg_levels_x = mg_levels_x + 1
946             ENDDO
947
948             j = ny+1
949             DO WHILE ( MOD( j, 2 ) == 0  .AND.  j /= 2 )
950                j = j / 2
951                mg_levels_y = mg_levels_y + 1
952             ENDDO
953
954             maximum_grid_level_l = MIN( mg_levels_x, mg_levels_y, mg_levels_z )
955
956             IF ( maximum_grid_level_l > mg_switch_to_pe0_level_l )  THEN
957                mg_switch_to_pe0_level_l = maximum_grid_level_l - &
958                                           mg_switch_to_pe0_level_l + 1
959             ELSE
960                mg_switch_to_pe0_level_l = 0
961             ENDIF
962
963          ELSE
964
965             mg_switch_to_pe0_level_l = 0
966             maximum_grid_level_l = maximum_grid_level
967
968          ENDIF
969
970!
971!--       Use switch level calculated above only if it is not pre-defined
972!--       by user
973          IF ( mg_switch_to_pe0_level == 0 )  THEN
974             IF ( mg_switch_to_pe0_level_l /= 0 )  THEN
975                mg_switch_to_pe0_level = mg_switch_to_pe0_level_l
976                maximum_grid_level     = maximum_grid_level_l
977             ENDIF
978
979          ELSE
980!
981!--          Check pre-defined value and reset to default, if neccessary
982             IF ( mg_switch_to_pe0_level < mg_switch_to_pe0_level_l  .OR.      &
983                  mg_switch_to_pe0_level >= maximum_grid_level_l )  THEN
984                message_string = 'mg_switch_to_pe0_level ' //                  &
985                                 'out of range and reset to 0'
986                CALL message( 'init_pegrid', 'PA0235', 0, 1, 0, 6, 0 )
987                mg_switch_to_pe0_level = 0
988             ELSE
989!
990!--             Use the largest number of possible levels anyway and recalculate
991!--             the switch level to this largest number of possible values
992                maximum_grid_level = maximum_grid_level_l
993
994             ENDIF
995
996          ENDIF
997
998       ENDIF
999
1000       ALLOCATE( grid_level_count(maximum_grid_level),                       &
1001                 nxl_mg(0:maximum_grid_level), nxr_mg(0:maximum_grid_level), &
1002                 nyn_mg(0:maximum_grid_level), nys_mg(0:maximum_grid_level), &
1003                 nzt_mg(0:maximum_grid_level) )
1004
1005       grid_level_count = 0
1006!
1007!--    Index zero required as dummy due to definition of arrays f2 and p2 in
1008!--    recursive subroutine next_mg_level
1009       nxl_mg(0) = 0; nxr_mg(0) = 0; nyn_mg(0) = 0; nys_mg(0) = 0; nzt_mg(0) = 0
1010
1011       nxl_l = nxl; nxr_l = nxr; nys_l = nys; nyn_l = nyn; nzt_l = nzt
1012
1013       DO  i = maximum_grid_level, 1 , -1
1014
1015          IF ( i == mg_switch_to_pe0_level )  THEN
1016#if defined( __parallel )
1017!
1018!--          Save the grid size of the subdomain at the switch level, because
1019!--          it is needed in poismg.
1020             ind(1) = nxl_l; ind(2) = nxr_l
1021             ind(3) = nys_l; ind(4) = nyn_l
1022             ind(5) = nzt_l
1023             ALLOCATE( ind_all(5*numprocs), mg_loc_ind(5,0:numprocs-1) )
1024             CALL MPI_ALLGATHER( ind, 5, MPI_INTEGER, ind_all, 5, &
1025                                 MPI_INTEGER, comm2d, ierr )
1026             DO  j = 0, numprocs-1
1027                DO  k = 1, 5
1028                   mg_loc_ind(k,j) = ind_all(k+j*5)
1029                ENDDO
1030             ENDDO
1031             DEALLOCATE( ind_all )
1032!
1033!--          Calculate the grid size of the total domain
1034             nxr_l = ( nxr_l-nxl_l+1 ) * pdims(1) - 1
1035             nxl_l = 0
1036             nyn_l = ( nyn_l-nys_l+1 ) * pdims(2) - 1
1037             nys_l = 0
1038!
1039!--          The size of this gathered array must not be larger than the
1040!--          array tend, which is used in the multigrid scheme as a temporary
1041!--          array. Therefore the subdomain size of an PE is calculated and
1042!--          the size of the gathered grid. These values are used in 
1043!--          routines pres and poismg
1044             subdomain_size = ( nxr - nxl + 2 * nbgp + 1 ) * &
1045                              ( nyn - nys + 2 * nbgp + 1 ) * ( nzt - nzb + 2 )
1046             gathered_size  = ( nxr_l - nxl_l + 3 ) * ( nyn_l - nys_l + 3 ) *  &
1047                              ( nzt_l - nzb + 2 )
1048
1049#else
1050             message_string = 'multigrid gather/scatter impossible ' //        &
1051                          'in non parallel mode'
1052             CALL message( 'init_pegrid', 'PA0237', 1, 2, 0, 6, 0 )
1053#endif
1054          ENDIF
1055
1056          nxl_mg(i) = nxl_l
1057          nxr_mg(i) = nxr_l
1058          nys_mg(i) = nys_l
1059          nyn_mg(i) = nyn_l
1060          nzt_mg(i) = nzt_l
1061
1062          nxl_l = nxl_l / 2 
1063          nxr_l = nxr_l / 2
1064          nys_l = nys_l / 2 
1065          nyn_l = nyn_l / 2 
1066          nzt_l = nzt_l / 2 
1067
1068       ENDDO
1069
1070!
1071!--    Temporary problem: Currently calculation of maxerror in routine poismg crashes
1072!--    if grid data are collected on PE0 already on the finest grid level.
1073!--    To be solved later.
1074       IF ( maximum_grid_level == mg_switch_to_pe0_level )  THEN
1075          message_string = 'grid coarsening on subdomain level cannot be performed'
1076          CALL message( 'poismg', 'PA0236', 1, 2, 0, 6, 0 )
1077       ENDIF
1078
1079    ELSE
1080
1081       maximum_grid_level = 0
1082
1083    ENDIF
1084
1085!
1086!-- Default level 0 tells exchange_horiz that all ghost planes have to be
1087!-- exchanged. grid_level is adjusted in poismg, where only one ghost plane
1088!-- is required.
1089    grid_level = 0
1090
1091#if defined( __parallel )
1092!
1093!-- Gridpoint number for the exchange of ghost points (y-line for 2D-arrays)
1094    ngp_y  = nyn - nys + 1 + 2 * nbgp
1095
1096!
1097!-- Define new MPI derived datatypes for the exchange of ghost points in
1098!-- x- and y-direction for 2D-arrays (line)
1099    CALL MPI_TYPE_VECTOR( nxr-nxl+1+2*nbgp, nbgp, ngp_y, MPI_REAL, type_x,     &
1100                          ierr )
1101    CALL MPI_TYPE_COMMIT( type_x, ierr )
1102
1103    CALL MPI_TYPE_VECTOR( nbgp, ngp_y, ngp_y, MPI_REAL, type_y, ierr )
1104    CALL MPI_TYPE_COMMIT( type_y, ierr )
1105!
1106!-- Define new MPI derived datatypes for the exchange of ghost points in
1107!-- x- and y-direction for 2D-INTEGER arrays (line) - on normal grid
1108    ALLOCATE( type_x_int(0:maximum_grid_level),                                &
1109              type_y_int(0:maximum_grid_level) )
1110
1111    CALL MPI_TYPE_VECTOR( nxr-nxl+1+2*nbgp, nbgp, ngp_y, MPI_INTEGER,          &
1112                          type_x_int(0), ierr )
1113    CALL MPI_TYPE_COMMIT( type_x_int(0), ierr )
1114
1115    CALL MPI_TYPE_VECTOR( nbgp, ngp_y, ngp_y, MPI_INTEGER, type_y_int(0), ierr )
1116    CALL MPI_TYPE_COMMIT( type_y_int(0), ierr )
1117!
1118!-- Calculate gridpoint numbers for the exchange of ghost points along x
1119!-- (yz-plane for 3D-arrays) and define MPI derived data type(s) for the
1120!-- exchange of ghost points in y-direction (xz-plane).
1121!-- Do these calculations for the model grid and (if necessary) also
1122!-- for the coarser grid levels used in the multigrid method
1123    ALLOCATE ( ngp_xz(0:maximum_grid_level),                                   &
1124               ngp_xz_int(0:maximum_grid_level),                               &
1125               ngp_yz(0:maximum_grid_level),                                   &
1126               ngp_yz_int(0:maximum_grid_level),                               &
1127               type_xz(0:maximum_grid_level),                                  &
1128               type_xz_int(0:maximum_grid_level),                              &
1129               type_yz(0:maximum_grid_level),                                  &
1130               type_yz_int(0:maximum_grid_level) )
1131
1132    nxl_l = nxl; nxr_l = nxr; nys_l = nys; nyn_l = nyn; nzb_l = nzb; nzt_l = nzt
1133
1134!
1135!-- Discern between the model grid, which needs nbgp ghost points and
1136!-- grid levels for the multigrid scheme. In the latter case only one
1137!-- ghost point is necessary.
1138!-- First definition of MPI-datatypes for exchange of ghost layers on normal
1139!-- grid. The following loop is needed for data exchange in poismg.f90.
1140!
1141!-- Determine number of grid points of yz-layer for exchange
1142    ngp_yz(0) = (nzt - nzb + 2) * (nyn - nys + 1 + 2 * nbgp)
1143
1144!
1145!-- Define an MPI-datatype for the exchange of left/right boundaries.
1146!-- Although data are contiguous in physical memory (which does not
1147!-- necessarily require an MPI-derived datatype), the data exchange between
1148!-- left and right PE's using the MPI-derived type is 10% faster than without.
1149    CALL MPI_TYPE_VECTOR( nxr-nxl+1+2*nbgp, nbgp*(nzt-nzb+2), ngp_yz(0), &
1150                          MPI_REAL, type_xz(0), ierr )
1151    CALL MPI_TYPE_COMMIT( type_xz(0), ierr )
1152
1153    CALL MPI_TYPE_VECTOR( nbgp, ngp_yz(0), ngp_yz(0), MPI_REAL, type_yz(0), &
1154                          ierr ) 
1155    CALL MPI_TYPE_COMMIT( type_yz(0), ierr )
1156
1157!
1158!-- Define data types for exchange of 3D Integer arrays.
1159    ngp_yz_int(0) = (nzt - nzb + 2) * (nyn - nys + 1 + 2 * nbgp)
1160
1161    CALL MPI_TYPE_VECTOR( nxr-nxl+1+2*nbgp, nbgp*(nzt-nzb+2), ngp_yz_int(0),   &
1162                          MPI_INTEGER, type_xz_int(0), ierr )
1163    CALL MPI_TYPE_COMMIT( type_xz_int(0), ierr )
1164
1165    CALL MPI_TYPE_VECTOR( nbgp, ngp_yz_int(0), ngp_yz_int(0), MPI_INTEGER,     &
1166                          type_yz_int(0), ierr )
1167    CALL MPI_TYPE_COMMIT( type_yz_int(0), ierr )
1168
1169!
1170!-- Definition of MPI-datatypes for multigrid method (coarser level grids)
1171    IF ( psolver(1:9) == 'multigrid' )  THEN
1172!   
1173!--    Definition of MPI-datatyoe as above, but only 1 ghost level is used
1174       DO  i = maximum_grid_level, 1 , -1
1175!
1176!--       For 3D-exchange on different multigrid level, one ghost point for
1177!--       REAL arrays, two ghost points for INTEGER arrays
1178          ngp_xz(i) = (nzt_l - nzb_l + 2) * (nxr_l - nxl_l + 3)
1179          ngp_yz(i) = (nzt_l - nzb_l + 2) * (nyn_l - nys_l + 3)
1180
1181          ngp_xz_int(i) = (nzt_l - nzb_l + 2) * (nxr_l - nxl_l + 3)
1182          ngp_yz_int(i) = (nzt_l - nzb_l + 2) * (nyn_l - nys_l + 3)
1183!
1184!--       MPI data type for REAL arrays, for xz-layers
1185          CALL MPI_TYPE_VECTOR( nxr_l-nxl_l+3, nzt_l-nzb_l+2, ngp_yz(i),       &
1186                                MPI_REAL, type_xz(i), ierr )
1187          CALL MPI_TYPE_COMMIT( type_xz(i), ierr )
1188
1189!
1190!--       MPI data type for INTEGER arrays, for xz-layers
1191          CALL MPI_TYPE_VECTOR( nxr_l-nxl_l+3, nzt_l-nzb_l+2, ngp_yz_int(i),   &
1192                                MPI_INTEGER, type_xz_int(i), ierr )
1193          CALL MPI_TYPE_COMMIT( type_xz_int(i), ierr )
1194
1195!
1196!--       MPI data type for REAL arrays, for yz-layers
1197          CALL MPI_TYPE_VECTOR( 1, ngp_yz(i), ngp_yz(i), MPI_REAL, type_yz(i), &
1198                                ierr )
1199          CALL MPI_TYPE_COMMIT( type_yz(i), ierr )
1200!
1201!--       MPI data type for INTEGER arrays, for yz-layers
1202          CALL MPI_TYPE_VECTOR( 1, ngp_yz_int(i), ngp_yz_int(i), MPI_INTEGER,  &
1203                                type_yz_int(i), ierr )
1204          CALL MPI_TYPE_COMMIT( type_yz_int(i), ierr )
1205
1206
1207!--       For 2D-exchange of INTEGER arrays on coarser grid level, where 2 ghost
1208!--       points need to be exchanged.
1209          CALL MPI_TYPE_VECTOR( nxr_l-nxl_l+5, 2, nyn_l-nys_l+5, MPI_INTEGER,          &
1210                                type_x_int(i), ierr )
1211          CALL MPI_TYPE_COMMIT( type_x_int(i), ierr )
1212
1213
1214          CALL MPI_TYPE_VECTOR( 2, nyn_l-nys_l+5, nyn_l-nys_l+5, MPI_INTEGER,          &
1215                                type_y_int(i), ierr )
1216          CALL MPI_TYPE_COMMIT( type_y_int(i), ierr )
1217
1218          nxl_l = nxl_l / 2
1219          nxr_l = nxr_l / 2
1220          nys_l = nys_l / 2
1221          nyn_l = nyn_l / 2
1222          nzt_l = nzt_l / 2
1223
1224       ENDDO
1225
1226    ENDIF
1227
1228#endif
1229
1230#if defined( __parallel )
1231!
1232!-- Setting of flags for inflow/outflow/nesting conditions.
1233    IF ( pleft == MPI_PROC_NULL )  THEN
1234       IF ( bc_lr == 'dirichlet/radiation' )  THEN
1235          inflow_l  = .TRUE.
1236       ELSEIF ( bc_lr == 'radiation/dirichlet' )  THEN
1237          outflow_l = .TRUE.
1238       ELSEIF ( bc_lr == 'nested' )  THEN
1239          nest_bound_l = .TRUE.
1240       ELSEIF ( bc_lr == 'forcing' )  THEN
1241          force_bound_l = .TRUE.
1242       ENDIF
1243    ENDIF
1244 
1245    IF ( pright == MPI_PROC_NULL )  THEN
1246       IF ( bc_lr == 'dirichlet/radiation' )  THEN
1247          outflow_r = .TRUE.
1248       ELSEIF ( bc_lr == 'radiation/dirichlet' )  THEN
1249          inflow_r  = .TRUE.
1250       ELSEIF ( bc_lr == 'nested' )  THEN
1251          nest_bound_r = .TRUE.
1252       ELSEIF ( bc_lr == 'forcing' )  THEN
1253          force_bound_r = .TRUE.
1254       ENDIF
1255    ENDIF
1256
1257    IF ( psouth == MPI_PROC_NULL )  THEN
1258       IF ( bc_ns == 'dirichlet/radiation' )  THEN
1259          outflow_s = .TRUE.
1260       ELSEIF ( bc_ns == 'radiation/dirichlet' )  THEN
1261          inflow_s  = .TRUE.
1262       ELSEIF ( bc_ns == 'nested' )  THEN
1263          nest_bound_s = .TRUE.
1264       ELSEIF ( bc_ns == 'forcing' )  THEN
1265          force_bound_s = .TRUE.
1266       ENDIF
1267    ENDIF
1268
1269    IF ( pnorth == MPI_PROC_NULL )  THEN
1270       IF ( bc_ns == 'dirichlet/radiation' )  THEN
1271          inflow_n  = .TRUE.
1272       ELSEIF ( bc_ns == 'radiation/dirichlet' )  THEN
1273          outflow_n = .TRUE.
1274       ELSEIF ( bc_ns == 'nested' )  THEN
1275          nest_bound_n = .TRUE.
1276       ELSEIF ( bc_ns == 'forcing' )  THEN
1277          force_bound_n = .TRUE.
1278       ENDIF
1279    ENDIF
1280!
1281!-- In case of synthetic turbulence geneartor determine ids.
1282!-- Please note, if no forcing or nesting is applied, the generator is applied
1283!-- only at the left lateral boundary.
1284    IF ( use_syn_turb_gen )  THEN
1285       IF ( force_bound_l  .OR.  nest_bound_l  .OR.  inflow_l )  THEN
1286          id_stg_left_l = myidx
1287       ELSE
1288          id_stg_left_l = 0
1289       ENDIF
1290       IF ( force_bound_r  .OR.  nest_bound_r )  THEN
1291          id_stg_right_l = myidx
1292       ELSE
1293          id_stg_right_l = 0
1294       ENDIF
1295       IF ( force_bound_s  .OR.  nest_bound_s )  THEN
1296          id_stg_south_l = myidy
1297       ELSE
1298          id_stg_south_l = 0
1299       ENDIF
1300       IF ( force_bound_n  .OR.  nest_bound_n )  THEN
1301          id_stg_north_l = myidy
1302       ELSE
1303          id_stg_north_l = 0
1304       ENDIF
1305
1306       IF ( collective_wait )  CALL MPI_BARRIER( comm2d, ierr )
1307       CALL MPI_ALLREDUCE( id_stg_left_l, id_stg_left,   1, MPI_INTEGER,       &
1308                           MPI_SUM, comm1dx, ierr )
1309
1310       IF ( collective_wait )  CALL MPI_BARRIER( comm2d, ierr )
1311       CALL MPI_ALLREDUCE( id_stg_right_l, id_stg_right, 1, MPI_INTEGER,       &
1312                           MPI_SUM, comm1dx, ierr )
1313
1314       IF ( collective_wait )  CALL MPI_BARRIER( comm2d, ierr )
1315       CALL MPI_ALLREDUCE( id_stg_south_l, id_stg_south, 1, MPI_INTEGER,       &
1316                           MPI_SUM, comm1dy, ierr )
1317
1318       IF ( collective_wait )  CALL MPI_BARRIER( comm2d, ierr )
1319       CALL MPI_ALLREDUCE( id_stg_north_l, id_stg_north, 1, MPI_INTEGER,       &
1320                           MPI_SUM, comm1dy, ierr )
1321
1322    ENDIF 
1323 
1324!
1325!-- Broadcast the id of the inflow PE
1326    IF ( inflow_l )  THEN
1327       id_inflow_l = myidx
1328    ELSE
1329       id_inflow_l = 0
1330    ENDIF
1331    IF ( collective_wait )  CALL MPI_BARRIER( comm2d, ierr )
1332    CALL MPI_ALLREDUCE( id_inflow_l, id_inflow, 1, MPI_INTEGER, MPI_SUM, &
1333                        comm1dx, ierr )
1334
1335!
1336!-- Broadcast the id of the recycling plane
1337!-- WARNING: needs to be adjusted in case of inflows other than from left side!
1338    IF ( NINT( recycling_width / dx ) >= nxl  .AND. &
1339         NINT( recycling_width / dx ) <= nxr )  THEN
1340       id_recycling_l = myidx
1341    ELSE
1342       id_recycling_l = 0
1343    ENDIF
1344    IF ( collective_wait )  CALL MPI_BARRIER( comm2d, ierr )
1345    CALL MPI_ALLREDUCE( id_recycling_l, id_recycling, 1, MPI_INTEGER, MPI_SUM, &
1346                        comm1dx, ierr )
1347
1348!
1349!-- Broadcast the id of the outflow PE and outflow-source plane
1350    IF ( turbulent_outflow )  THEN
1351
1352       IF ( outflow_r )  THEN
1353          id_outflow_l = myidx
1354       ELSE
1355          id_outflow_l = 0
1356       ENDIF
1357       IF ( collective_wait )  CALL MPI_BARRIER( comm2d, ierr )
1358       CALL MPI_ALLREDUCE( id_outflow_l, id_outflow, 1, MPI_INTEGER, MPI_SUM, &
1359                           comm1dx, ierr )
1360
1361       IF ( NINT( outflow_source_plane / dx ) >= nxl  .AND. &
1362            NINT( outflow_source_plane / dx ) <= nxr )  THEN
1363          id_outflow_source_l = myidx
1364       ELSE
1365          id_outflow_source_l = 0
1366       ENDIF
1367       IF ( collective_wait )  CALL MPI_BARRIER( comm2d, ierr )
1368       CALL MPI_ALLREDUCE( id_outflow_source_l, id_outflow_source, 1, &
1369                           MPI_INTEGER, MPI_SUM, comm1dx, ierr )
1370
1371    ENDIF
1372
1373    CALL location_message( 'finished', .TRUE. )
1374
1375#else
1376    IF ( bc_lr == 'dirichlet/radiation' )  THEN
1377       inflow_l  = .TRUE.
1378       outflow_r = .TRUE.
1379    ELSEIF ( bc_lr == 'radiation/dirichlet' )  THEN
1380       outflow_l = .TRUE.
1381       inflow_r  = .TRUE.
1382    ENDIF
1383
1384    IF ( bc_ns == 'dirichlet/radiation' )  THEN
1385       inflow_n  = .TRUE.
1386       outflow_s = .TRUE.
1387    ELSEIF ( bc_ns == 'radiation/dirichlet' )  THEN
1388       outflow_n = .TRUE.
1389       inflow_s  = .TRUE.
1390    ENDIF
1391#endif
1392
1393!
1394!-- At the inflow or outflow, u or v, respectively, have to be calculated for
1395!-- one more grid point.
1396    IF ( inflow_l .OR. outflow_l .OR. nest_bound_l .OR. force_bound_l )  THEN
1397       nxlu = nxl + 1
1398    ELSE
1399       nxlu = nxl
1400    ENDIF
1401    IF ( inflow_s .OR. outflow_s .OR. nest_bound_s .OR. force_bound_s )  THEN
1402       nysv = nys + 1
1403    ELSE
1404       nysv = nys
1405    ENDIF
1406
1407!
1408!-- Allocate wall flag arrays used in the multigrid solver
1409    IF ( psolver(1:9) == 'multigrid' )  THEN
1410
1411       DO  i = maximum_grid_level, 1, -1
1412
1413           SELECT CASE ( i )
1414
1415              CASE ( 1 )
1416                 ALLOCATE( wall_flags_1(nzb:nzt_mg(i)+1,         &
1417                                        nys_mg(i)-1:nyn_mg(i)+1, &
1418                                        nxl_mg(i)-1:nxr_mg(i)+1) )
1419
1420              CASE ( 2 )
1421                 ALLOCATE( wall_flags_2(nzb:nzt_mg(i)+1,         &
1422                                        nys_mg(i)-1:nyn_mg(i)+1, &
1423                                        nxl_mg(i)-1:nxr_mg(i)+1) )
1424
1425              CASE ( 3 )
1426                 ALLOCATE( wall_flags_3(nzb:nzt_mg(i)+1,         &
1427                                        nys_mg(i)-1:nyn_mg(i)+1, &
1428                                        nxl_mg(i)-1:nxr_mg(i)+1) )
1429
1430              CASE ( 4 )
1431                 ALLOCATE( wall_flags_4(nzb:nzt_mg(i)+1,         &
1432                                        nys_mg(i)-1:nyn_mg(i)+1, &
1433                                        nxl_mg(i)-1:nxr_mg(i)+1) )
1434
1435              CASE ( 5 )
1436                 ALLOCATE( wall_flags_5(nzb:nzt_mg(i)+1,         &
1437                                        nys_mg(i)-1:nyn_mg(i)+1, &
1438                                        nxl_mg(i)-1:nxr_mg(i)+1) )
1439
1440              CASE ( 6 )
1441                 ALLOCATE( wall_flags_6(nzb:nzt_mg(i)+1,         &
1442                                        nys_mg(i)-1:nyn_mg(i)+1, &
1443                                        nxl_mg(i)-1:nxr_mg(i)+1) )
1444
1445              CASE ( 7 )
1446                 ALLOCATE( wall_flags_7(nzb:nzt_mg(i)+1,         &
1447                                        nys_mg(i)-1:nyn_mg(i)+1, &
1448                                        nxl_mg(i)-1:nxr_mg(i)+1) )
1449
1450              CASE ( 8 )
1451                 ALLOCATE( wall_flags_8(nzb:nzt_mg(i)+1,         &
1452                                        nys_mg(i)-1:nyn_mg(i)+1, &
1453                                        nxl_mg(i)-1:nxr_mg(i)+1) )
1454
1455              CASE ( 9 )
1456                 ALLOCATE( wall_flags_9(nzb:nzt_mg(i)+1,         &
1457                                        nys_mg(i)-1:nyn_mg(i)+1, &
1458                                        nxl_mg(i)-1:nxr_mg(i)+1) )
1459
1460              CASE ( 10 )
1461                 ALLOCATE( wall_flags_10(nzb:nzt_mg(i)+1,        &
1462                                        nys_mg(i)-1:nyn_mg(i)+1, &
1463                                        nxl_mg(i)-1:nxr_mg(i)+1) )
1464
1465              CASE DEFAULT
1466                 message_string = 'more than 10 multigrid levels'
1467                 CALL message( 'init_pegrid', 'PA0238', 1, 2, 0, 6, 0 )
1468
1469          END SELECT
1470
1471       ENDDO
1472
1473    ENDIF
1474
1475 END SUBROUTINE init_pegrid
Note: See TracBrowser for help on using the repository browser.