!> @file init_pegrid.f90 !--------------------------------------------------------------------------------------------------! ! This file is part of the PALM model system. ! ! PALM is free software: you can redistribute it and/or modify it under the terms of the GNU General ! Public License as published by the Free Software Foundation, either version 3 of the License, or ! (at your option) any later version. ! ! PALM is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the ! implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General ! Public License for more details. ! ! You should have received a copy of the GNU General Public License along with PALM. If not, see ! . ! ! Current revisions: ! ------------------ ! ! ! Former revisions: ! ----------------- ! $Id: init_pegrid.f90 4648 2020-08-25 07:52:08Z hellstea $ ! file re-formatted to follow the PALM coding standard ! ! 4564 2020-06-12 14:03:36Z raasch ! Vertical nesting method of Huq et al. (2019) removed ! ! 4461 2020-03-12 16:51:59Z raasch ! communicator configurations for four virtual pe grids defined ! ! 4444 2020-03-05 15:59:50Z raasch ! bugfix: cpp-directives for serial mode added ! ! 4360 2020-01-07 11:25:50Z suehring ! changed message PA0467 ! ! 4264 2019-10-15 16:00:23Z scharf ! corrected error message string ! ! 4241 2019-09-27 06:32:47Z raasch ! Check added to ensure that subdomain grid has at least the size as given by the number of ghost ! points ! ! 4182 2019-08-22 15:20:23Z scharf ! Corrected "Former revisions" section ! ! 4045 2019-06-21 10:58:47Z raasch ! bugfix: kind attribute added to nint function to allow for large integers which may appear in case ! of default recycling width and small grid spacings ! ! 3999 2019-05-23 16:09:37Z suehring ! Spend 3 ghost points also in case of pw-scheme when nesting is applied ! ! 3897 2019-04-15 11:51:14Z suehring ! Minor revision of multigrid check; give warning instead of an abort. ! ! 3890 2019-04-12 15:59:20Z suehring ! Check if grid coarsening is possible on subdomain, in order to avoid that multigrid approach ! effectively reduces to a Gauss-Seidel scheme. ! ! 3885 2019-04-11 11:29:34Z kanani ! Changes related to global restructuring of location messages and introduction of additional debug ! messages ! ! 3884 2019-04-10 13:31:55Z Giersch ! id_recycling is only calculated in case of tubulent inflow ! ! 3761 2019-02-25 15:31:42Z raasch ! unused variable removed ! ! 3655 2019-01-07 16:51:22Z knoop ! variables documented ! ! Revision 1.1 1997/07/24 11:15:09 raasch ! Initial revision ! ! ! Description: ! ------------ !> Determination of the virtual processor topology (if not prescribed by the user) and computation !> of the grid point number and array bounds of the local domains. !> @todo: remove MPI-data types for 2D exchange on coarse multigrid level (not used any more) !--------------------------------------------------------------------------------------------------! SUBROUTINE init_pegrid USE control_parameters, & ONLY: bc_dirichlet_l, bc_dirichlet_n, bc_dirichlet_r, bc_dirichlet_s, bc_lr, bc_ns, & bc_radiation_l, bc_radiation_n, bc_radiation_r, bc_radiation_s, grid_level, & grid_level_count, maximum_grid_level, message_string, mg_switch_to_pe0_level, psolver #if defined( __parallel ) USE control_parameters, & ONLY: coupling_mode, coupling_topology, gathered_size, momentum_advec, & outflow_source_plane, recycling_width, scalar_advec, subdomain_size, & turbulent_inflow, turbulent_outflow, y_shift USE grid_variables, & ONLY: dx #endif USE indices, & ONLY: nnx, nny, nnz, nx, nxl, nxl_mg, nxlu, nxr, nxr_mg, ny, nyn, nyn_mg, nys, nys_mg, & nysv, nz, nzb, nzt, nzt_mg, wall_flags_1, wall_flags_2, wall_flags_3, wall_flags_4, & wall_flags_5, wall_flags_6, wall_flags_7, wall_flags_8, wall_flags_9, wall_flags_10 #if defined( __parallel ) USE indices, & ONLY: mg_loc_ind, nbgp, nx_a, nx_o, ny_a, ny_o #endif USE kinds USE pegrid #if defined( __parallel ) USE pmc_interface, & ONLY: nested_run USE spectra_mod, & ONLY: calculate_spectra USE synthetic_turbulence_generator_mod, & ONLY: id_stg_left, id_stg_north, id_stg_right, id_stg_south, use_syn_turb_gen #endif USE transpose_indices, & ONLY: nxl_y, nxl_z, nxr_y, nxr_z, nyn_x, nyn_z, nys_x, nys_z, nzb_x, nzb_y, nzt_x, nzt_y #if defined( __parallel ) USE transpose_indices, & ONLY: nxl_yd, nxr_yd, nzb_yd, nzt_yd #endif IMPLICIT NONE INTEGER(iwp) :: i !< running index over number of processors or number of multigrid level #if defined( __parallel ) INTEGER(iwp) :: id_inflow_l !< ID indicating processors located at the left inflow boundary INTEGER(iwp) :: id_outflow_l !< local value of id_outflow INTEGER(iwp) :: id_outflow_source_l !< local value of id_outflow_source INTEGER(iwp) :: id_recycling_l !< ID indicating processors located at the recycling plane INTEGER(iwp) :: id_stg_left_l !< left lateral boundary local core id in case of turbulence generator INTEGER(iwp) :: id_stg_north_l !< north lateral boundary local core id in case of turbulence generator INTEGER(iwp) :: id_stg_right_l !< right lateral boundary local core id in case of turbulence generator INTEGER(iwp) :: id_stg_south_l !< south lateral boundary local core id in case of turbulence generator INTEGER(iwp) :: ind(5) !< array containing the subdomain bounds #endif INTEGER(iwp) :: j !< running index, used for various loops INTEGER(iwp) :: k !< number of vertical grid points in different multigrid level INTEGER(iwp) :: maximum_grid_level_l !< maximum number of grid level without switching to PE 0 INTEGER(iwp) :: mg_levels_x !< maximum number of grid level allowed along x-direction INTEGER(iwp) :: mg_levels_y !< maximum number of grid level allowed along y-direction INTEGER(iwp) :: mg_levels_z !< maximum number of grid level allowed along z-direction INTEGER(iwp) :: mg_switch_to_pe0_level_l !< maximum number of grid level with switching to PE 0 #if defined( __parallel ) INTEGER(iwp) :: nnx_y !< quotient of number of grid points along x-direction and number of PEs used along y-direction INTEGER(iwp) :: nny_x !< quotient of number of grid points along y-direction and number of PEs used along x-direction INTEGER(iwp) :: nny_z !< quotient of number of grid points along y-direction and number of PEs used along x-direction INTEGER(iwp) :: nnz_x !< quotient of number of grid points along z-direction and number of PEs used along x-direction INTEGER(iwp) :: nnz_y !< quotient of number of grid points along z-direction and number of PEs used along x-direction INTEGER(iwp) :: numproc_sqr !< square root of the number of processors #endif INTEGER(iwp) :: nxl_l !< lower index bound along x-direction on subdomain and different multigrid level INTEGER(iwp) :: nxr_l !< upper index bound along x-direction on subdomain and different multigrid level INTEGER(iwp) :: nyn_l !< lower index bound along y-direction on subdomain and different multigrid level INTEGER(iwp) :: nys_l !< upper index bound along y-direction on subdomain and different multigrid level #if defined( __parallel ) INTEGER(iwp) :: nzb_l !< lower index bound along z-direction on subdomain and different multigrid level #endif INTEGER(iwp) :: nzt_l !< upper index bound along z-direction on subdomain and different multigrid level !$ INTEGER(iwp) :: omp_get_num_threads !< number of OpenMP threads #if defined( __parallel ) INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: ind_all !< dummy array containing index bounds on subdomain, used for gathering INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: nxlf !< lower index bound allong x-direction for every PE INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: nxrf !< upper index bound allong x-direction for every PE INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: nynf !< lower index bound allong y-direction for every PE INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: nysf !< lower index bound allong y-direction for every PE INTEGER(iwp), DIMENSION(2) :: pdims_remote !< number of PEs used for coupled model (only in atmospher-ocean coupling) INTEGER(iwp) :: lcoord(2) !< PE coordinates of left neighbor along x and y INTEGER(iwp) :: rcoord(2) !< PE coordinates of right neighbor along x and y #endif ! !-- Get the number of OpenMP threads !$OMP PARALLEL !$ threads_per_task = omp_get_num_threads() !$OMP END PARALLEL #if defined( __parallel ) CALL location_message( 'creating virtual PE grids + MPI derived data types', 'start' ) ! !-- Determine the processor topology or check it, if prescribed by the user IF ( npex == -1 .AND. npey == -1 ) THEN ! !-- Automatic determination of the topology numproc_sqr = SQRT( REAL( numprocs, KIND=wp ) ) pdims(1) = MAX( numproc_sqr , 1 ) DO WHILE ( MOD( numprocs , pdims(1) ) /= 0 ) pdims(1) = pdims(1) - 1 ENDDO pdims(2) = numprocs / pdims(1) ELSEIF ( npex /= -1 .AND. npey /= -1 ) THEN ! !-- Prescribed by user. Number of processors on the prescribed topology must be equal to the !-- number of PEs available to the job IF ( ( npex * npey ) /= numprocs ) THEN WRITE( message_string, * ) 'number of PEs of the prescribed ', 'topology (', npex*npey, & ') does not match & the number of ', & 'PEs available to the job (', numprocs, ')' CALL message( 'init_pegrid', 'PA0221', 1, 2, 0, 6, 0 ) ENDIF pdims(1) = npex pdims(2) = npey ELSE ! !-- If the processor topology is prescribed by the user, the number of !-- PEs must be given in both directions message_string = 'if the processor topology is prescribed by th' // & 'e user & both values of "npex" and "npey" must be given' // & ' in the &NAMELIST-parameter file' CALL message( 'init_pegrid', 'PA0222', 1, 2, 0, 6, 0 ) ENDIF ! !-- Create four default MPI communicators for the 2d virtual PE grid. One of them will be used as !-- the main communicator for this run, while others might be used for specific quantities like !-- aerosol, chemical species, or passive scalars), if their horizontal boundary conditions shall !-- be different from those of the other quantities (e.g. non-cyclic conditions for aerosols, and !-- cyclic conditions for all others). DO i = 1, 4 IF ( i == 1 ) cyclic = (/ .TRUE., .TRUE. /) ! cyclic along x and y IF ( i == 2 ) cyclic = (/ .TRUE., .FALSE. /) ! cyclic along x IF ( i == 3 ) cyclic = (/ .FALSE., .TRUE. /) ! cyllic along y IF ( i == 4 ) cyclic = (/ .FALSE., .FALSE. /) ! non-cyclic CALL MPI_CART_CREATE( comm_palm, ndim, pdims, cyclic, reorder, & communicator_configurations(i)%mpi_communicator, ierr ) CALL MPI_CART_SHIFT( communicator_configurations(i)%mpi_communicator, 0, 1, & communicator_configurations(i)%pleft, & communicator_configurations(i)%pright, ierr ) CALL MPI_CART_SHIFT( communicator_configurations(i)%mpi_communicator, 1, 1, & communicator_configurations(i)%psouth, & communicator_configurations(i)%pnorth, ierr ) ENDDO ! !-- If necessary, set horizontal boundary conditions to non-cyclic IF ( bc_lr /= 'cyclic' ) cyclic(1) = .FALSE. IF ( bc_ns /= 'cyclic' ) cyclic(2) = .FALSE. ! !-- Set the main communicator (virtual pe grid) for this run IF ( bc_lr == 'cyclic' .AND. bc_ns == 'cyclic' ) i = 1 IF ( bc_lr == 'cyclic' .AND. bc_ns /= 'cyclic' ) i = 2 IF ( bc_lr /= 'cyclic' .AND. bc_ns == 'cyclic' ) i = 3 IF ( bc_lr /= 'cyclic' .AND. bc_ns /= 'cyclic' ) i = 4 comm2d = communicator_configurations(i)%mpi_communicator pleft = communicator_configurations(i)%pleft pright = communicator_configurations(i)%pright psouth = communicator_configurations(i)%psouth pnorth = communicator_configurations(i)%pnorth ! !-- Set rank and coordinates of the main communicator CALL MPI_COMM_RANK( comm2d, myid, ierr ) WRITE (myid_char,'(''_'',I6.6)') myid CALL MPI_CART_COORDS( comm2d, myid, ndim, pcoord, ierr ) ! !-- In case of cyclic boundary conditions, a y-shift at the boundaries in x-direction can be !-- introduced via parameter y_shift. The shift is done by modifying the processor grid in such a !-- way that processors located at the x-boundary communicate across it to processors with !-- y-coordinate shifted by y_shift relative to their own. This feature can not be used in !-- combination with an fft pressure solver. It has been implemented to counter the effect of streak !-- structures in case of cyclic boundary conditions. For a description of these see Munters !-- (2016; dx.doi.org/10.1063/1.4941912) !-- !-- Get coordinates of left and right neighbor on PE grid IF ( y_shift /= 0 ) THEN IF ( bc_lr == 'cyclic' ) THEN IF ( TRIM( psolver ) /= 'multigrid' .AND. TRIM( psolver ) /= 'multigrid_noopt') THEN message_string = 'y_shift /= 0 requires a multigrid pressure solver ' CALL message( 'check_parameters', 'PA0468', 1, 2, 0, 6, 0 ) ENDIF CALL MPI_CART_COORDS( comm2d, pright, ndim, rcoord, ierr ) CALL MPI_CART_COORDS( comm2d, pleft, ndim, lcoord, ierr ) ! !-- If the x(y)-coordinate of the right (left) neighbor is smaller (greater) than that of the !-- calling process, then the calling process is located on the right (left) boundary of the !-- processor grid. In that case, the y-coordinate of that neighbor is increased (decreased) !-- by y_shift. !-- The rank of the process with that coordinate is then inquired and the neighbor rank for !-- MPI_SENDRECV, pright (pleft) is set to it. !-- In this way, the calling process receives a new right (left) neighbor for all future !-- MPI_SENDRECV calls. That neighbor has a y-coordinate of y+(-)y_shift, where y is the !-- original right (left) neighbor's y-coordinate. The modulo-operation ensures that if the !-- neighbor's y-coordinate exceeds the grid-boundary, it will be relocated to the opposite !-- part of the grid cyclicly. IF ( rcoord(1) < pcoord(1) ) THEN rcoord(2) = MODULO( rcoord(2) + y_shift, pdims(2) ) CALL MPI_CART_RANK( comm2d, rcoord, pright, ierr ) ENDIF IF ( lcoord(1) > pcoord(1) ) THEN lcoord(2) = MODULO( lcoord(2) - y_shift, pdims(2) ) CALL MPI_CART_RANK( comm2d, lcoord, pleft, ierr ) ENDIF ELSE ! !-- y-shift for non-cyclic boundary conditions is only implemented !-- for the turbulence recycling method in inflow_turbulence.f90 IF ( .NOT. turbulent_inflow ) THEN message_string = 'y_shift /= 0 is only allowed for cyclic ' // & 'boundary conditions in both directions ' // & 'or with turbulent_inflow == .TRUE.' CALL message( 'check_parameters', 'PA0467', 1, 2, 0, 6, 0 ) ENDIF ENDIF ENDIF ! !-- Determine sub-topologies for transpositions !-- Transposition from z to x: remain_dims(1) = .TRUE. remain_dims(2) = .FALSE. CALL MPI_CART_SUB( comm2d, remain_dims, comm1dx, ierr ) CALL MPI_COMM_RANK( comm1dx, myidx, ierr ) ! !-- Transposition from x to y remain_dims(1) = .FALSE. remain_dims(2) = .TRUE. CALL MPI_CART_SUB( comm2d, remain_dims, comm1dy, ierr ) CALL MPI_COMM_RANK( comm1dy, myidy, ierr ) ! !-- Calculate array bounds along x-direction for every PE. ALLOCATE( nxlf(0:pdims(1)-1), nxrf(0:pdims(1)-1), nynf(0:pdims(2)-1), nysf(0:pdims(2)-1) ) IF ( MOD( nx+1 , pdims(1) ) /= 0 ) THEN WRITE( message_string, * ) 'x-direction: gridpoint number (' ,nx+1, ') ', & 'is not an& integral multiple of the number', & ' of processors (', pdims(1), ')' CALL message( 'init_pegrid', 'PA0225', 1, 2, 0, 6, 0 ) ELSE nnx = ( nx + 1 ) / pdims(1) ENDIF ! !-- Left and right array bounds, number of gridpoints DO i = 0, pdims(1)-1 nxlf(i) = i * nnx nxrf(i) = ( i + 1 ) * nnx - 1 ENDDO ! !-- Calculate array bounds in y-direction for every PE. IF ( MOD( ny+1 , pdims(2) ) /= 0 ) THEN WRITE( message_string, * ) 'y-direction: gridpoint number (', ny+1, ') ', & 'is not an& integral multiple of the number', & ' of processors (', pdims(2), ')' CALL message( 'init_pegrid', 'PA0227', 1, 2, 0, 6, 0 ) ELSE nny = ( ny + 1 ) / pdims(2) ENDIF ! !-- South and north array bounds DO j = 0, pdims(2)-1 nysf(j) = j * nny nynf(j) = ( j + 1 ) * nny - 1 ENDDO ! !-- Local array bounds of the respective PEs nxl = nxlf(pcoord(1)) nxr = nxrf(pcoord(1)) nys = nysf(pcoord(2)) nyn = nynf(pcoord(2)) nzb = 0 nzt = nz nnz = nz ! !-- Set switches to define if the PE is situated at the border of the virtual processor grid IF ( nxl == 0 ) left_border_pe = .TRUE. IF ( nxr == nx ) right_border_pe = .TRUE. IF ( nys == 0 ) south_border_pe = .TRUE. IF ( nyn == ny ) north_border_pe = .TRUE. ! !-- Calculate array bounds and gridpoint numbers for the transposed arrays (needed in the pressure !-- solver) !-- For the transposed arrays, cyclic boundaries as well as top and bottom boundaries are omitted, !-- because they are obstructive to the transposition ! !-- 1. transposition z --> x !-- This transposition is not neccessary in case of a 1d-decomposition along x IF ( psolver == 'poisfft' .OR. calculate_spectra ) THEN IF ( pdims(2) /= 1 ) THEN IF ( MOD( nz , pdims(1) ) /= 0 ) THEN WRITE( message_string, * ) 'transposition z --> x:& ', & 'nz=', nz, ' is not an integral multiple ', & 'of pdims(1)=', pdims(1) CALL message( 'init_pegrid', 'PA0230', 1, 2, 0, 6, 0 ) ENDIF ENDIF nys_x = nys nyn_x = nyn nny_x = nny nnz_x = nz / pdims(1) nzb_x = 1 + myidx * nnz_x nzt_x = ( myidx + 1 ) * nnz_x sendrecvcount_zx = nnx * nny * nnz_x ENDIF IF ( psolver == 'poisfft' ) THEN ! !-- 2. transposition x --> y IF ( MOD( nx+1 , pdims(2) ) /= 0 ) THEN WRITE( message_string, * ) 'transposition x --> y:& ', & 'nx+1=', nx+1, ' is not an integral ', & 'multiple of pdims(2)=', pdims(2) CALL message( 'init_pegrid', 'PA0231', 1, 2, 0, 6, 0 ) ENDIF nnz_y = nnz_x nzb_y = nzb_x nzt_y = nzt_x nnx_y = (nx+1) / pdims(2) nxl_y = myidy * nnx_y nxr_y = ( myidy + 1 ) * nnx_y - 1 sendrecvcount_xy = nnx_y * nny_x * nnz_y ! !-- 3. transposition y --> z !-- (ELSE: x --> y in case of 1D-decomposition along x) nxl_z = nxl_y nxr_z = nxr_y nny_z = (ny+1) / pdims(1) nys_z = myidx * nny_z nyn_z = ( myidx + 1 ) * nny_z - 1 sendrecvcount_yz = nnx_y * nny_z * nnz_y IF ( pdims(2) /= 1 ) THEN ! !-- y --> z !-- This transposition is not neccessary in case of a 1d-decomposition !-- along x, except that the uptream-spline method is switched on IF ( MOD( ny+1 , pdims(1) ) /= 0 ) THEN WRITE( message_string, * ) 'transposition y --> z:& ', & 'ny+1=', ny+1, ' is not an integral ', & 'multiple of pdims(1)=', pdims(1) CALL message( 'init_pegrid', 'PA0232', 1, 2, 0, 6, 0 ) ENDIF ELSE ! !-- x --> y !-- This condition must be fulfilled for a 1D-decomposition along x IF ( MOD( ny+1 , pdims(1) ) /= 0 ) THEN WRITE( message_string, * ) 'transposition x --> y:& ', & 'ny+1=', ny+1, ' is not an integral ', & 'multiple of pdims(1)=', pdims(1) CALL message( 'init_pegrid', 'PA0233', 1, 2, 0, 6, 0 ) ENDIF ENDIF ENDIF ! !-- Indices for direct transpositions z --> y (used for calculating spectra) IF ( calculate_spectra ) THEN IF ( MOD( nz, pdims(2) ) /= 0 ) THEN WRITE( message_string, * ) 'direct transposition z --> y (needed ', & 'for spectra):& nz=', nz, ' is not an ', & 'integral multiple of pdims(2)=', pdims(2) CALL message( 'init_pegrid', 'PA0234', 1, 2, 0, 6, 0 ) ELSE nxl_yd = nxl nxr_yd = nxr nzb_yd = 1 + myidy * ( nz / pdims(2) ) nzt_yd = ( myidy + 1 ) * ( nz / pdims(2) ) sendrecvcount_zyd = nnx * nny * ( nz / pdims(2) ) ENDIF ENDIF IF ( psolver == 'poisfft' .OR. calculate_spectra ) THEN ! !-- Indices for direct transpositions y --> x !-- (they are only possible in case of a 1d-decomposition along x) IF ( pdims(2) == 1 ) THEN nny_x = nny / pdims(1) nys_x = myid * nny_x nyn_x = ( myid + 1 ) * nny_x - 1 nzb_x = 1 nzt_x = nz sendrecvcount_xy = nnx * nny_x * nz ENDIF ENDIF IF ( psolver == 'poisfft' ) THEN ! !-- Indices for direct transpositions x --> y !-- (they are only possible in case of a 1d-decomposition along y) IF ( pdims(1) == 1 ) THEN nnx_y = nnx / pdims(2) nxl_y = myid * nnx_y nxr_y = ( myid + 1 ) * nnx_y - 1 nzb_y = 1 nzt_y = nz sendrecvcount_xy = nnx_y * nny * nz ENDIF ENDIF ! !-- Arrays for storing the array bounds are needed any more DEALLOCATE( nxlf , nxrf , nynf , nysf ) ! !-- Collect index bounds from other PEs (to be written to restart file later) ALLOCATE( hor_index_bounds(4,0:numprocs-1) ) IF ( myid == 0 ) THEN hor_index_bounds(1,0) = nxl hor_index_bounds(2,0) = nxr hor_index_bounds(3,0) = nys hor_index_bounds(4,0) = nyn ! !-- Receive data from all other PEs DO i = 1, numprocs-1 CALL MPI_RECV( ibuf, 4, MPI_INTEGER, i, MPI_ANY_TAG, comm2d, status, ierr ) hor_index_bounds(:,i) = ibuf(1:4) ENDDO ELSE ! !-- Send index bounds to PE0 ibuf(1) = nxl ibuf(2) = nxr ibuf(3) = nys ibuf(4) = nyn CALL MPI_SEND( ibuf, 4, MPI_INTEGER, 0, myid, comm2d, ierr ) ENDIF #if defined( __print ) ! !-- Control output IF ( myid == 0 ) THEN PRINT*, '*** processor topology ***' PRINT*, ' ' PRINT*, 'myid pcoord left right south north idx idy nxl: nxr',' nys: nyn' PRINT*, '------------------------------------------------------------','-----------' WRITE (*,1000) 0, pcoord(1), pcoord(2), pleft, pright, psouth, pnorth, myidx, myidy, nxl, & nxr, nys, nyn 1000 FORMAT (I4,2X,'(',I3,',',I3,')',3X,I4,2X,I4,3X,I4,2X,I4,2X,I3,1X,I3,2(2X,I4,':',I4)) ! !-- Receive data from the other PEs DO i = 1,numprocs-1 CALL MPI_RECV( ibuf, 12, MPI_INTEGER, i, MPI_ANY_TAG, comm2d, status, ierr ) WRITE (*,1000) i, ( ibuf(j) , j = 1,12 ) ENDDO ELSE ! !-- Send data to PE0 ibuf(1) = pcoord(1); ibuf(2) = pcoord(2); ibuf(3) = pleft ibuf(4) = pright; ibuf(5) = psouth; ibuf(6) = pnorth; ibuf(7) = myidx ibuf(8) = myidy; ibuf(9) = nxl; ibuf(10) = nxr; ibuf(11) = nys ibuf(12) = nyn CALL MPI_SEND( ibuf, 12, MPI_INTEGER, 0, myid, comm2d, ierr ) ENDIF #endif ! !-- Determine the number of ghost point layers IF ( scalar_advec == 'ws-scheme' .OR. & momentum_advec == 'ws-scheme' .OR. nested_run ) THEN nbgp = 3 ELSE nbgp = 1 ENDIF ! !-- Check that the number of computational grid points is not smaller than the number of ghost !-- points. IF ( nnx < nbgp ) THEN WRITE( message_string, * ) 'number of subdomain grid points along x (', nnx, ') is smaller',& 'than the number of ghost points (', nbgp, ')' CALL message( 'init_pegrid', 'PA0682', 1, 2, 0, 6, 0 ) ENDIF IF ( nny < nbgp ) THEN WRITE( message_string, * ) 'number of subdomain grid points along y (', nny, ') is smaller',& 'than the number of ghost points (', nbgp, ')' CALL message( 'init_pegrid', 'PA0683', 1, 2, 0, 6, 0 ) ENDIF ! !-- Create a new MPI derived datatype for the exchange of surface (xy) data, which is needed for !-- coupled atmosphere-ocean runs. !-- First, calculate number of grid points of an xy-plane. ngp_xy = ( nxr - nxl + 1 + 2 * nbgp ) * ( nyn - nys + 1 + 2 * nbgp ) CALL MPI_TYPE_VECTOR( ngp_xy, 1, nzt-nzb+2, MPI_REAL, type_xy, ierr ) CALL MPI_TYPE_COMMIT( type_xy, ierr ) IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN ! !-- Pass the number of grid points of the atmosphere model to !-- the ocean model and vice versa IF ( coupling_mode == 'atmosphere_to_ocean' ) THEN nx_a = nx ny_a = ny IF ( myid == 0 ) THEN CALL MPI_SEND( nx_a, 1, MPI_INTEGER, numprocs, 1, comm_inter, ierr ) CALL MPI_SEND( ny_a, 1, MPI_INTEGER, numprocs, 2, comm_inter, ierr ) CALL MPI_SEND( pdims, 2, MPI_INTEGER, numprocs, 3, comm_inter, ierr ) CALL MPI_RECV( nx_o, 1, MPI_INTEGER, numprocs, 4, comm_inter, status, ierr ) CALL MPI_RECV( ny_o, 1, MPI_INTEGER, numprocs, 5, comm_inter, status, ierr ) CALL MPI_RECV( pdims_remote, 2, MPI_INTEGER, numprocs, 6, comm_inter, status, ierr ) ENDIF CALL MPI_BCAST( nx_o, 1, MPI_INTEGER, 0, comm2d, ierr ) CALL MPI_BCAST( ny_o, 1, MPI_INTEGER, 0, comm2d, ierr ) CALL MPI_BCAST( pdims_remote, 2, MPI_INTEGER, 0, comm2d, ierr ) ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN nx_o = nx ny_o = ny IF ( myid == 0 ) THEN CALL MPI_RECV( nx_a, 1, MPI_INTEGER, 0, 1, comm_inter, status, ierr ) CALL MPI_RECV( ny_a, 1, MPI_INTEGER, 0, 2, comm_inter, status, ierr ) CALL MPI_RECV( pdims_remote, 2, MPI_INTEGER, 0, 3, comm_inter, status, ierr ) CALL MPI_SEND( nx_o, 1, MPI_INTEGER, 0, 4, comm_inter, ierr ) CALL MPI_SEND( ny_o, 1, MPI_INTEGER, 0, 5, comm_inter, ierr ) CALL MPI_SEND( pdims, 2, MPI_INTEGER, 0, 6, comm_inter, ierr ) ENDIF CALL MPI_BCAST( nx_a, 1, MPI_INTEGER, 0, comm2d, ierr) CALL MPI_BCAST( ny_a, 1, MPI_INTEGER, 0, comm2d, ierr) CALL MPI_BCAST( pdims_remote, 2, MPI_INTEGER, 0, comm2d, ierr) ENDIF ngp_a = ( nx_a+1 + 2 * nbgp ) * ( ny_a+1 + 2 * nbgp ) ngp_o = ( nx_o+1 + 2 * nbgp ) * ( ny_o+1 + 2 * nbgp ) ! !-- Determine if the horizontal grid and the number of PEs in ocean and atmosphere is same or not. IF ( nx_o == nx_a .AND. ny_o == ny_a .AND. & pdims(1) == pdims_remote(1) .AND. pdims(2) == pdims_remote(2) ) THEN coupling_topology = 0 ELSE coupling_topology = 1 ENDIF ! !-- Determine the target PEs for the exchange between ocean and atmosphere (comm2d) IF ( coupling_topology == 0 ) THEN ! !-- In case of identical topologies, every atmosphere PE has exactly one ocean PE counterpart !-- and vice versa IF ( TRIM( coupling_mode ) == 'atmosphere_to_ocean' ) THEN target_id = myid + numprocs ELSE target_id = myid ENDIF ELSE ! !-- In case of nonequivalent topology in ocean and atmosphere only for PE0 in ocean and PE0 in !-- atmosphere a target_id is needed, since data echxchange between ocean and atmosphere will !-- be done only between these PEs. IF ( myid == 0 ) THEN IF ( TRIM( coupling_mode ) == 'atmosphere_to_ocean' ) THEN target_id = numprocs ELSE target_id = 0 ENDIF ENDIF ENDIF ENDIF #else ! !-- Array bounds when running on a single PE (respectively a non-parallel machine) nxl = 0 nxr = nx nnx = nxr - nxl + 1 nys = 0 nyn = ny nny = nyn - nys + 1 nzb = 0 nzt = nz nnz = nz ALLOCATE( hor_index_bounds(4,0:0) ) hor_index_bounds(1,0) = nxl hor_index_bounds(2,0) = nxr hor_index_bounds(3,0) = nys hor_index_bounds(4,0) = nyn ! !-- Array bounds for the pressure solver (in the parallel code, these bounds are the ones for the !-- transposed arrays) nys_x = nys nyn_x = nyn nzb_x = nzb + 1 nzt_x = nzt nxl_y = nxl nxr_y = nxr nzb_y = nzb + 1 nzt_y = nzt nxl_z = nxl nxr_z = nxr nys_z = nys nyn_z = nyn #endif ! !-- Calculate number of grid levels necessary for the multigrid poisson solver as well as the !-- gridpoint indices on each level IF ( psolver(1:9) == 'multigrid' ) THEN ! !-- First calculate number of possible grid levels for the subdomains mg_levels_x = 1 mg_levels_y = 1 mg_levels_z = 1 i = nnx DO WHILE ( MOD( i, 2 ) == 0 .AND. i /= 2 ) i = i / 2 mg_levels_x = mg_levels_x + 1 ENDDO j = nny DO WHILE ( MOD( j, 2 ) == 0 .AND. j /= 2 ) j = j / 2 mg_levels_y = mg_levels_y + 1 ENDDO k = nz ! do not use nnz because it might be > nz due to transposition ! requirements DO WHILE ( MOD( k, 2 ) == 0 .AND. k /= 2 ) k = k / 2 mg_levels_z = mg_levels_z + 1 ENDDO ! !-- The optimized MG-solver does not allow odd values for nz at the coarsest grid level IF ( TRIM( psolver ) /= 'multigrid_noopt' ) THEN IF ( MOD( k, 2 ) /= 0 ) mg_levels_z = mg_levels_z - 1 ! !-- An odd value of nz does not work. The finest level must have an even value. IF ( mg_levels_z == 0 ) THEN message_string = 'optimized multigrid method requires nz to be even' CALL message( 'init_pegrid', 'PA0495', 1, 2, 0, 6, 0 ) ENDIF ENDIF maximum_grid_level = MIN( mg_levels_x, mg_levels_y, mg_levels_z ) ! !-- Check if subdomain sizes prevents any coarsening. !-- This case, the maximum number of grid levels is 1, i.e. effectively a Gauss-Seidel scheme is !-- applied rather than a multigrid approach. !-- Give a warning in this case. IF ( maximum_grid_level == 1 .AND. mg_switch_to_pe0_level == -1 ) THEN message_string = 'No grid coarsening possible, multigrid ' // & 'approach effectively reduces to a Gauss-Seidel ' // & 'scheme.' CALL message( 'poismg', 'PA0648', 0, 1, 0, 6, 0 ) ENDIF ! !-- Find out, if the total domain allows more levels. These additional levels are identically !-- processed on all PEs. IF ( numprocs > 1 .AND. mg_switch_to_pe0_level /= -1 ) THEN IF ( mg_levels_z > MIN( mg_levels_x, mg_levels_y ) ) THEN mg_switch_to_pe0_level_l = maximum_grid_level mg_levels_x = 1 mg_levels_y = 1 i = nx+1 DO WHILE ( MOD( i, 2 ) == 0 .AND. i /= 2 ) i = i / 2 mg_levels_x = mg_levels_x + 1 ENDDO j = ny+1 DO WHILE ( MOD( j, 2 ) == 0 .AND. j /= 2 ) j = j / 2 mg_levels_y = mg_levels_y + 1 ENDDO maximum_grid_level_l = MIN( mg_levels_x, mg_levels_y, mg_levels_z ) IF ( maximum_grid_level_l > mg_switch_to_pe0_level_l ) THEN mg_switch_to_pe0_level_l = maximum_grid_level_l - mg_switch_to_pe0_level_l + 1 ELSE mg_switch_to_pe0_level_l = 0 ENDIF ELSE mg_switch_to_pe0_level_l = 0 maximum_grid_level_l = maximum_grid_level ENDIF ! !-- Use switch level calculated above only if it is not pre-defined by user IF ( mg_switch_to_pe0_level == 0 ) THEN IF ( mg_switch_to_pe0_level_l /= 0 ) THEN mg_switch_to_pe0_level = mg_switch_to_pe0_level_l maximum_grid_level = maximum_grid_level_l ENDIF ELSE ! !-- Check pre-defined value and reset to default, if neccessary IF ( mg_switch_to_pe0_level < mg_switch_to_pe0_level_l .OR. & mg_switch_to_pe0_level >= maximum_grid_level_l ) THEN message_string = 'mg_switch_to_pe0_level ' // & 'out of range and reset to 0' CALL message( 'init_pegrid', 'PA0235', 0, 1, 0, 6, 0 ) mg_switch_to_pe0_level = 0 ELSE ! !-- Use the largest number of possible levels anyway and recalculate the switch level to !-- this largest number of possible values maximum_grid_level = maximum_grid_level_l ENDIF ENDIF ENDIF ALLOCATE( grid_level_count(maximum_grid_level), & nxl_mg(0:maximum_grid_level), nxr_mg(0:maximum_grid_level), & nyn_mg(0:maximum_grid_level), nys_mg(0:maximum_grid_level), & nzt_mg(0:maximum_grid_level) ) grid_level_count = 0 ! !-- Index zero required as dummy due to definition of arrays f2 and p2 in recursive subroutine !-- next_mg_level nxl_mg(0) = 0; nxr_mg(0) = 0; nyn_mg(0) = 0; nys_mg(0) = 0; nzt_mg(0) = 0 nxl_l = nxl; nxr_l = nxr; nys_l = nys; nyn_l = nyn; nzt_l = nzt DO i = maximum_grid_level, 1 , -1 IF ( i == mg_switch_to_pe0_level ) THEN #if defined( __parallel ) ! !-- Save the grid size of the subdomain at the switch level, because it is needed in poismg. ind(1) = nxl_l; ind(2) = nxr_l ind(3) = nys_l; ind(4) = nyn_l ind(5) = nzt_l ALLOCATE( ind_all(5*numprocs), mg_loc_ind(5,0:numprocs-1) ) CALL MPI_ALLGATHER( ind, 5, MPI_INTEGER, ind_all, 5, & MPI_INTEGER, comm2d, ierr ) DO j = 0, numprocs-1 DO k = 1, 5 mg_loc_ind(k,j) = ind_all(k+j*5) ENDDO ENDDO DEALLOCATE( ind_all ) ! !-- Calculate the grid size of the total domain nxr_l = ( nxr_l-nxl_l+1 ) * pdims(1) - 1 nxl_l = 0 nyn_l = ( nyn_l-nys_l+1 ) * pdims(2) - 1 nys_l = 0 ! !-- The size of this gathered array must not be larger than the array tend, which is used !-- in the multigrid scheme as a temporary array. Therefore the subdomain size of an PE is !-- calculated and the size of the gathered grid. These values are used in routines pres !-- and poismg. subdomain_size = ( nxr - nxl + 2 * nbgp + 1 ) * & ( nyn - nys + 2 * nbgp + 1 ) * ( nzt - nzb + 2 ) gathered_size = ( nxr_l - nxl_l + 3 ) * ( nyn_l - nys_l + 3 ) * ( nzt_l - nzb + 2 ) #else message_string = 'multigrid gather/scatter impossible ' // & 'in non parallel mode' CALL message( 'init_pegrid', 'PA0237', 1, 2, 0, 6, 0 ) #endif ENDIF nxl_mg(i) = nxl_l nxr_mg(i) = nxr_l nys_mg(i) = nys_l nyn_mg(i) = nyn_l nzt_mg(i) = nzt_l nxl_l = nxl_l / 2 nxr_l = nxr_l / 2 nys_l = nys_l / 2 nyn_l = nyn_l / 2 nzt_l = nzt_l / 2 ENDDO ! !-- Temporary problem: Currently calculation of maxerror in routine poismg crashes if grid data !-- are collected on PE0 already on the finest grid level. !-- To be solved later. IF ( maximum_grid_level == mg_switch_to_pe0_level ) THEN message_string = 'grid coarsening on subdomain level cannot be performed' CALL message( 'poismg', 'PA0236', 1, 2, 0, 6, 0 ) ENDIF ELSE maximum_grid_level = 0 ENDIF ! !-- Default level 0 tells exchange_horiz that all ghost planes have to be exchanged. grid_level is !-- adjusted in poismg, where only one ghost plane is required. grid_level = 0 #if defined( __parallel ) ! !-- Gridpoint number for the exchange of ghost points (y-line for 2D-arrays) ngp_y = nyn - nys + 1 + 2 * nbgp ! !-- Define new MPI derived datatypes for the exchange of ghost points in x- and y-direction for !-- 2D-arrays (line) CALL MPI_TYPE_VECTOR( nxr-nxl+1+2*nbgp, nbgp, ngp_y, MPI_REAL, type_x, ierr ) CALL MPI_TYPE_COMMIT( type_x, ierr ) CALL MPI_TYPE_VECTOR( nbgp, ngp_y, ngp_y, MPI_REAL, type_y, ierr ) CALL MPI_TYPE_COMMIT( type_y, ierr ) ! !-- Define new MPI derived datatypes for the exchange of ghost points in x- and y-direction for !-- 2D-INTEGER arrays (line) - on normal grid. !-- Define types for 32-bit and 8-bit Integer. The 8-bit Integer are only required on normal grid, !-- while 32-bit Integer may be also required on coarser grid level in case of multigrid solver. ! !-- 8-bit Integer CALL MPI_TYPE_VECTOR( nxr-nxl+1+2*nbgp, nbgp, ngp_y, MPI_BYTE, type_x_byte, ierr ) CALL MPI_TYPE_COMMIT( type_x_byte, ierr ) CALL MPI_TYPE_VECTOR( nbgp, ngp_y, ngp_y, MPI_BYTE, type_y_byte, ierr ) CALL MPI_TYPE_COMMIT( type_y_byte, ierr ) ! !-- 32-bit Integer ALLOCATE( type_x_int(0:maximum_grid_level), type_y_int(0:maximum_grid_level) ) CALL MPI_TYPE_VECTOR( nxr-nxl+1+2*nbgp, nbgp, ngp_y, MPI_INTEGER, type_x_int(0), ierr ) CALL MPI_TYPE_COMMIT( type_x_int(0), ierr ) CALL MPI_TYPE_VECTOR( nbgp, ngp_y, ngp_y, MPI_INTEGER, type_y_int(0), ierr ) CALL MPI_TYPE_COMMIT( type_y_int(0), ierr ) ! !-- Calculate gridpoint numbers for the exchange of ghost points along x (yz-plane for 3D-arrays) !-- and define MPI derived data type(s) for the exchange of ghost points in y-direction (xz-plane). !-- Do these calculations for the model grid and (if necessary) also for the coarser grid levels !-- used in the multigrid method ALLOCATE ( ngp_xz(0:maximum_grid_level), & ngp_xz_int(0:maximum_grid_level), & ngp_yz(0:maximum_grid_level), & ngp_yz_int(0:maximum_grid_level), & type_xz(0:maximum_grid_level), & type_xz_int(0:maximum_grid_level), & type_yz(0:maximum_grid_level), & type_yz_int(0:maximum_grid_level) ) nxl_l = nxl; nxr_l = nxr; nys_l = nys; nyn_l = nyn; nzb_l = nzb; nzt_l = nzt ! !-- Discern between the model grid, which needs nbgp ghost points and grid levels for the multigrid !-- scheme. In the latter case only one ghost point is necessary. !-- First definition of MPI-datatypes for exchange of ghost layers on normal grid. The following !-- loop is needed for data exchange in poismg.f90. ! !-- Determine number of grid points of yz-layer for exchange ngp_yz(0) = (nzt - nzb + 2) * (nyn - nys + 1 + 2 * nbgp) ! !-- Define an MPI-datatype for the exchange of left/right boundaries. !-- Although data are contiguous in physical memory (which does not necessarily require an !-- MPI-derived datatype), the data exchange between left and right PE's using the MPI-derived type !-- is 10% faster than without. CALL MPI_TYPE_VECTOR( nxr-nxl+1+2*nbgp, nbgp*(nzt-nzb+2), ngp_yz(0), MPI_REAL, type_xz(0), & ierr ) CALL MPI_TYPE_COMMIT( type_xz(0), ierr ) CALL MPI_TYPE_VECTOR( nbgp, ngp_yz(0), ngp_yz(0), MPI_REAL, type_yz(0), ierr ) CALL MPI_TYPE_COMMIT( type_yz(0), ierr ) ! !-- Define data types for exchange of 3D Integer arrays. ngp_yz_int(0) = (nzt - nzb + 2) * (nyn - nys + 1 + 2 * nbgp) CALL MPI_TYPE_VECTOR( nxr-nxl+1+2*nbgp, nbgp*(nzt-nzb+2), ngp_yz_int(0), MPI_INTEGER, & type_xz_int(0), ierr ) CALL MPI_TYPE_COMMIT( type_xz_int(0), ierr ) CALL MPI_TYPE_VECTOR( nbgp, ngp_yz_int(0), ngp_yz_int(0), MPI_INTEGER, type_yz_int(0), ierr ) CALL MPI_TYPE_COMMIT( type_yz_int(0), ierr ) ! !-- Definition of MPI-datatypes for multigrid method (coarser level grids) IF ( psolver(1:9) == 'multigrid' ) THEN ! !-- Definition of MPI-datatyoe as above, but only 1 ghost level is used DO i = maximum_grid_level, 1 , -1 ! !-- For 3D-exchange on different multigrid level, one ghost point for REAL arrays, two ghost !-- points for INTEGER arrays ngp_xz(i) = (nzt_l - nzb_l + 2) * (nxr_l - nxl_l + 3) ngp_yz(i) = (nzt_l - nzb_l + 2) * (nyn_l - nys_l + 3) ngp_xz_int(i) = (nzt_l - nzb_l + 2) * (nxr_l - nxl_l + 3) ngp_yz_int(i) = (nzt_l - nzb_l + 2) * (nyn_l - nys_l + 3) ! !-- MPI data type for REAL arrays, for xz-layers CALL MPI_TYPE_VECTOR( nxr_l-nxl_l+3, nzt_l-nzb_l+2, ngp_yz(i), MPI_REAL, type_xz(i), & ierr ) CALL MPI_TYPE_COMMIT( type_xz(i), ierr ) ! !-- MPI data type for INTEGER arrays, for xz-layers CALL MPI_TYPE_VECTOR( nxr_l-nxl_l+3, nzt_l-nzb_l+2, ngp_yz_int(i), MPI_INTEGER, & type_xz_int(i), ierr ) CALL MPI_TYPE_COMMIT( type_xz_int(i), ierr ) ! !-- MPI data type for REAL arrays, for yz-layers CALL MPI_TYPE_VECTOR( 1, ngp_yz(i), ngp_yz(i), MPI_REAL, type_yz(i), ierr ) CALL MPI_TYPE_COMMIT( type_yz(i), ierr ) ! !-- MPI data type for INTEGER arrays, for yz-layers CALL MPI_TYPE_VECTOR( 1, ngp_yz_int(i), ngp_yz_int(i), MPI_INTEGER, type_yz_int(i), ierr ) CALL MPI_TYPE_COMMIT( type_yz_int(i), ierr ) !-- For 2D-exchange of INTEGER arrays on coarser grid level, where 2 ghost points need to be !-- exchanged. Only required for 32-bit Integer arrays. CALL MPI_TYPE_VECTOR( nxr_l-nxl_l+5, 2, nyn_l-nys_l+5, MPI_INTEGER, type_x_int(i), ierr ) CALL MPI_TYPE_COMMIT( type_x_int(i), ierr ) CALL MPI_TYPE_VECTOR( 2, nyn_l-nys_l+5, nyn_l-nys_l+5, MPI_INTEGER, type_y_int(i), ierr ) CALL MPI_TYPE_COMMIT( type_y_int(i), ierr ) nxl_l = nxl_l / 2 nxr_l = nxr_l / 2 nys_l = nys_l / 2 nyn_l = nyn_l / 2 nzt_l = nzt_l / 2 ENDDO ENDIF #endif #if defined( __parallel ) ! !-- Setting of flags for inflow/outflow/nesting conditions. IF ( pleft == MPI_PROC_NULL ) THEN IF ( bc_lr == 'dirichlet/radiation' .OR. bc_lr == 'nested' .OR. & bc_lr == 'nesting_offline' ) THEN bc_dirichlet_l = .TRUE. ELSEIF ( bc_lr == 'radiation/dirichlet' ) THEN bc_radiation_l = .TRUE. ENDIF ENDIF IF ( pright == MPI_PROC_NULL ) THEN IF ( bc_lr == 'dirichlet/radiation' ) THEN bc_radiation_r = .TRUE. ELSEIF ( bc_lr == 'radiation/dirichlet' .OR. bc_lr == 'nested' .OR. & bc_lr == 'nesting_offline' ) THEN bc_dirichlet_r = .TRUE. ENDIF ENDIF IF ( psouth == MPI_PROC_NULL ) THEN IF ( bc_ns == 'dirichlet/radiation' ) THEN bc_radiation_s = .TRUE. ELSEIF ( bc_ns == 'radiation/dirichlet' .OR. bc_ns == 'nested' .OR. & bc_ns == 'nesting_offline' ) THEN bc_dirichlet_s = .TRUE. ENDIF ENDIF IF ( pnorth == MPI_PROC_NULL ) THEN IF ( bc_ns == 'dirichlet/radiation' .OR. bc_ns == 'nested' .OR. & bc_ns == 'nesting_offline' ) THEN bc_dirichlet_n = .TRUE. ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN bc_radiation_n = .TRUE. ENDIF ENDIF ! !-- In case of synthetic turbulence geneartor determine ids. !-- Please note, if no forcing or nesting is applied, the generator is applied only at the left !-- lateral boundary. IF ( use_syn_turb_gen ) THEN IF ( bc_dirichlet_l ) THEN id_stg_left_l = myidx ELSE id_stg_left_l = 0 ENDIF IF ( bc_dirichlet_r ) THEN id_stg_right_l = myidx ELSE id_stg_right_l = 0 ENDIF IF ( bc_dirichlet_s ) THEN id_stg_south_l = myidy ELSE id_stg_south_l = 0 ENDIF IF ( bc_dirichlet_n ) THEN id_stg_north_l = myidy ELSE id_stg_north_l = 0 ENDIF IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr ) CALL MPI_ALLREDUCE( id_stg_left_l, id_stg_left, 1, MPI_INTEGER, MPI_SUM, comm1dx, ierr ) IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr ) CALL MPI_ALLREDUCE( id_stg_right_l, id_stg_right, 1, MPI_INTEGER, MPI_SUM, comm1dx, ierr ) IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr ) CALL MPI_ALLREDUCE( id_stg_south_l, id_stg_south, 1, MPI_INTEGER, MPI_SUM, comm1dy, ierr ) IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr ) CALL MPI_ALLREDUCE( id_stg_north_l, id_stg_north, 1, MPI_INTEGER, MPI_SUM, comm1dy, ierr ) ENDIF ! !-- Broadcast the id of the inflow PE IF ( bc_dirichlet_l ) THEN id_inflow_l = myidx ELSE id_inflow_l = 0 ENDIF IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr ) CALL MPI_ALLREDUCE( id_inflow_l, id_inflow, 1, MPI_INTEGER, MPI_SUM, comm1dx, ierr ) ! !-- Broadcast the id of the recycling plane !-- WARNING: needs to be adjusted in case of inflows other than from left side! IF ( turbulent_inflow ) THEN IF ( NINT( recycling_width / dx, KIND=idp ) >= nxl .AND. & NINT( recycling_width / dx, KIND=idp ) <= nxr ) THEN id_recycling_l = myidx ELSE id_recycling_l = 0 ENDIF IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr ) CALL MPI_ALLREDUCE( id_recycling_l, id_recycling, 1, MPI_INTEGER, MPI_SUM, comm1dx, ierr ) ENDIF ! !-- Broadcast the id of the outflow PE and outflow-source plane IF ( turbulent_outflow ) THEN IF ( bc_radiation_r ) THEN id_outflow_l = myidx ELSE id_outflow_l = 0 ENDIF IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr ) CALL MPI_ALLREDUCE( id_outflow_l, id_outflow, 1, MPI_INTEGER, MPI_SUM, & comm1dx, ierr ) IF ( NINT( outflow_source_plane / dx ) >= nxl .AND. & NINT( outflow_source_plane / dx ) <= nxr ) THEN id_outflow_source_l = myidx ELSE id_outflow_source_l = 0 ENDIF IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr ) CALL MPI_ALLREDUCE( id_outflow_source_l, id_outflow_source, 1, MPI_INTEGER, MPI_SUM, & comm1dx, ierr ) ENDIF CALL location_message( 'creating virtual PE grids + MPI derived data types', 'finished' ) #else IF ( bc_lr == 'dirichlet/radiation' ) THEN bc_dirichlet_l = .TRUE. bc_radiation_r = .TRUE. ELSEIF ( bc_lr == 'radiation/dirichlet' ) THEN bc_radiation_l = .TRUE. bc_dirichlet_r = .TRUE. ENDIF IF ( bc_ns == 'dirichlet/radiation' ) THEN bc_dirichlet_n = .TRUE. bc_radiation_s = .TRUE. ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN bc_radiation_n = .TRUE. bc_dirichlet_s = .TRUE. ENDIF #endif ! !-- At the inflow or outflow, u or v, respectively, have to be calculated for one more grid point. IF ( bc_dirichlet_l .OR. bc_radiation_l ) THEN nxlu = nxl + 1 ELSE nxlu = nxl ENDIF IF ( bc_dirichlet_s .OR. bc_radiation_s ) THEN nysv = nys + 1 ELSE nysv = nys ENDIF ! !-- Allocate wall flag arrays used in the multigrid solver IF ( psolver(1:9) == 'multigrid' ) THEN DO i = maximum_grid_level, 1, -1 SELECT CASE ( i ) CASE ( 1 ) ALLOCATE( wall_flags_1(nzb:nzt_mg(i)+1, & nys_mg(i)-1:nyn_mg(i)+1, & nxl_mg(i)-1:nxr_mg(i)+1) ) CASE ( 2 ) ALLOCATE( wall_flags_2(nzb:nzt_mg(i)+1, & nys_mg(i)-1:nyn_mg(i)+1, & nxl_mg(i)-1:nxr_mg(i)+1) ) CASE ( 3 ) ALLOCATE( wall_flags_3(nzb:nzt_mg(i)+1, & nys_mg(i)-1:nyn_mg(i)+1, & nxl_mg(i)-1:nxr_mg(i)+1) ) CASE ( 4 ) ALLOCATE( wall_flags_4(nzb:nzt_mg(i)+1, & nys_mg(i)-1:nyn_mg(i)+1, & nxl_mg(i)-1:nxr_mg(i)+1) ) CASE ( 5 ) ALLOCATE( wall_flags_5(nzb:nzt_mg(i)+1, & nys_mg(i)-1:nyn_mg(i)+1, & nxl_mg(i)-1:nxr_mg(i)+1) ) CASE ( 6 ) ALLOCATE( wall_flags_6(nzb:nzt_mg(i)+1, & nys_mg(i)-1:nyn_mg(i)+1, & nxl_mg(i)-1:nxr_mg(i)+1) ) CASE ( 7 ) ALLOCATE( wall_flags_7(nzb:nzt_mg(i)+1, & nys_mg(i)-1:nyn_mg(i)+1, & nxl_mg(i)-1:nxr_mg(i)+1) ) CASE ( 8 ) ALLOCATE( wall_flags_8(nzb:nzt_mg(i)+1, & nys_mg(i)-1:nyn_mg(i)+1, & nxl_mg(i)-1:nxr_mg(i)+1) ) CASE ( 9 ) ALLOCATE( wall_flags_9(nzb:nzt_mg(i)+1, & nys_mg(i)-1:nyn_mg(i)+1, & nxl_mg(i)-1:nxr_mg(i)+1) ) CASE ( 10 ) ALLOCATE( wall_flags_10(nzb:nzt_mg(i)+1, & nys_mg(i)-1:nyn_mg(i)+1, & nxl_mg(i)-1:nxr_mg(i)+1) ) CASE DEFAULT message_string = 'more than 10 multigrid levels' CALL message( 'init_pegrid', 'PA0238', 1, 2, 0, 6, 0 ) END SELECT ENDDO ENDIF END SUBROUTINE init_pegrid