Home

Context Navigation

source: palm/trunk/SOURCE/init_grid.f90 @ 2864

Last change on this file since 2864 was 2823, checked in by Giersch, 7 years ago
Set boundary condtions for 3D topography in case of non-cyclic boundary conditions
Property svn:keywords set to `Id`
File size: 98.9 KB

Line
1	!> @file init_grid.f90
2	!------------------------------------------------------------------------------!
3	! This file is part of the PALM model system.
4	!
5	! PALM is free software: you can redistribute it and/or modify it under the
6	! terms of the GNU General Public License as published by the Free Software
7	! Foundation, either version 3 of the License, or (at your option) any later
8	! version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2018 Leibniz Universitaet Hannover
18	!------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: init_grid.f90 2823 2018-02-20 15:31:45Z suehring $
27	! Set boundary conditions for 3D topography in case of non-cyclic boundary
28	! conditions
29	!
30	! 2796 2018-02-08 12:25:39Z suehring
31	! Bugfix in 3D building initialization
32	!
33	! 2747 2018-01-15 12:44:17Z suehring
34	! Bugfix, topography height is rounded to the nearest discrete grid level
35	!
36	! 2718 2018-01-02 08:49:38Z maronga
37	! Corrected "Former revisions" section
38	!
39	! 2701 2017-12-15 15:40:50Z suehring
40	! Changes from last commit documented
41	!
42	! 2698 2017-12-14 18:46:24Z suehring
43	! Bugfix in get_topography_top_index
44	!
45	! 2696 2017-12-14 17:12:51Z kanani
46	! Change in file header (GPL part)
47	! Revised topography input
48	! Set nzb_max not for the entire nest domain, only for boundary PEs
49	! Re-organize routine, split-up into several subroutines
50	! Modularize poismg_noopt
51	! Remove setting bit 26, 27, 28 in wall_flags_0, indicating former '_outer'
52	! arrays (not required any more).
53	! Bugfix in generic tunnel setup (MS)
54	!
55	! 2550 2017-10-16 17:12:01Z boeske
56	! Set lateral boundary conditions for topography on all three ghost layers
57	!
58	! 2478 2017-09-18 13:37:24Z suehring
59	! Bugfix, correct flag for use_top
60	!
61	! 2365 2017-08-21 14:59:59Z kanani
62	! Vertical nesting implemented (SadiqHuq)
63	!
64	! 2319 2017-07-20 17:33:17Z suehring
65	! Remove print statements
66	!
67	! 2318 2017-07-20 17:27:44Z suehring
68	! Get topography top index via Function call
69	!
70	! 2317 2017-07-20 17:27:19Z suehring
71	! Bugfixes in reading 3D topography from file
72	!
73	! 2274 2017-06-09 13:27:48Z Giersch
74	! Changed error messages
75	!
76	! 2233 2017-05-30 18:08:54Z suehring
77	!
78	! 2232 2017-05-30 17:47:52Z suehring
79	! - Adjustments according to new topography representation
80	! - Bugfix: Move determination of nzb_max behind topography modification in
81	! cell-edge case
82	! - Get rid off global arrays required for topography output
83	! - Enable topography input via netcdf
84	! - Generic tunnel set-up added
85	!
86	! 2200 2017-04-11 11:37:51Z suehring
87	! monotonic_adjustment removed
88	!
89	! 2169 2017-03-06 18:16:35Z suehring
90	! Bugfix, move setting for topography grid convention to init_grid, else, if no
91	! value is set, the simulation may abort in case of restarts
92	!
93	! 2128 2017-01-23 15:00:03Z suehring
94	! Bugfix in setting topography from file in case of ocean simulations
95	!
96	! 2088 2016-12-19 16:30:25Z suehring
97	! Bugfix in generic topography in case of ocean simulations
98	!
99	! 2037 2016-10-26 11:15:40Z knoop
100	! Anelastic approximation implemented
101	!
102	! 2021 2016-10-07 14:08:57Z suehring
103	! Bugfix: setting Neumann boundary conditions for topography required for
104	! topography flags in multigrid_noopt solver
105	!
106	! 2000 2016-08-20 18:09:15Z knoop
107	! Forced header and separation lines into 80 columns
108	!
109	! 1994 2016-08-15 09:52:21Z suehring
110	! Bugfix in definition of generic topography
111	!
112	! 1982 2016-08-01 11:04:48Z suehring
113	! Bugfix concering consistency check for topography
114	!
115	! 1968 2016-07-18 12:01:49Z suehring
116	! Changed: PE-wise reading of topography file in order to avoid global definition
117	! of arrays nzb_local and nzb_tmp. Thereby, topography definition for single
118	! buildings and street canyons has changed, as well as flag setting for
119	! multigrid scheme.
120	!
121	! Bugfix in checking l_grid anisotropy.
122	! Simplify initial computation of lwall and vertical_influence, i.e. remove
123	! nzb_s_inner as it is still zero at this point.
124	!
125	! 1942 2016-06-14 12:18:18Z suehring
126	! Topography filter implemented to fill holes resolved by only one grid point.
127	! Initialization of flags for ws-scheme moved to advec_ws.
128	!
129	! 1931 2016-06-10 12:06:59Z suehring
130	! Rename multigrid into multigrid_noopt and multigrid_fast into multigrid
131	!
132	! 1910 2016-05-26 06:49:46Z raasch
133	! Bugfix: if topography is read from file, Neumann conditions are used for the
134	! nzb_local array (instead of cyclic conditions) in case that non-cyclic
135	! boundary conditions are switched on for the run
136	!
137	! 1902 2016-05-09 11:18:56Z suehring
138	! Set topography flags for multigrid solver only (not for multigrid_fast)
139	!
140	! 1886 2016-04-21 11:20:47Z suehring
141	! Bugfix: setting advection flags near walls
142	! reformulated index values for nzb_v_inner
143	! variable discriptions added in declaration block
144	!
145	! 1845 2016-04-08 08:29:13Z raasch
146	! nzb_2d removed
147	!
148	! 1804 2016-04-05 16:30:18Z maronga
149	! Removed code for parameter file check (__check)
150	!
151	! 1779 2016-03-03 08:01:28Z raasch
152	! coupling_char is trimmed at every place it occurs, because it can have
153	! different length now
154	!
155	! 1762 2016-02-25 12:31:13Z hellstea
156	! Introduction of nested domain feature
157	!
158	! 1743 2016-01-13 10:23:51Z raasch
159	! Bugfix for calculation of nzb_s_outer and nzb_u_outer at north boundary of
160	! total domain
161	!
162	! 1691 2015-10-26 16:17:44Z maronga
163	! Renamed prandtl_layer to constant_flux_layer.
164	!
165	! 1682 2015-10-07 23:56:08Z knoop
166	! Code annotations made doxygen readable
167	!
168	! 1677 2015-10-02 13:25:23Z boeske
169	! Bugfix: Ghost points are included in wall_flags_0 and wall_flags_00
170	!
171	! 1675 2015-10-02 08:28:59Z gronemeier
172	! Bugfix: Definition of topography grid levels
173	!
174	! 1660 2015-09-21 08:15:16Z gronemeier
175	! Bugfix: Definition of topography grid levels if vertical grid stretching
176	! starts below the maximum topography height.
177	!
178	! 1580 2015-04-10 13:43:49Z suehring
179	! Bugfix: setting flags for 5th order scheme near buildings
180	!
181	! 1575 2015-03-27 09:56:27Z raasch
182	! adjustments for psolver-queries
183	!
184	! 1557 2015-03-05 16:43:04Z suehring
185	! Adjustment for monotoinic limiter
186	!
187	! 1418 2014-06-06 13:05:08Z fricke
188	! Bugfix: Change if-condition for stretched grid in the ocean, with the old
189	! condition and a negative value for dz_stretch_level the condition
190	! was always true for the whole model domain
191	!
192	! 1409 2014-05-23 12:11:32Z suehring
193	! Bugfix: set wall_flags_0 at inflow and outflow boundary also for i <= nxlu
194	! j <= nysv
195	!
196	! 1353 2014-04-08 15:21:23Z heinze
197	! REAL constants provided with KIND-attribute
198	!
199	! 1322 2014-03-20 16:38:49Z raasch
200	! REAL constants defined as wp-kind
201	!
202	! 1320 2014-03-20 08:40:49Z raasch
203	! ONLY-attribute added to USE-statements,
204	! kind-parameters added to all INTEGER and REAL declaration statements,
205	! kinds are defined in new module kinds,
206	! revision history before 2012 removed,
207	! comment fields (!:) to be used for variable explanations added to
208	! all variable declaration statements
209	!
210	! 1221 2013-09-10 08:59:13Z raasch
211	! wall_flags_00 introduced to hold bits 32-63,
212	! additional 3D-flag arrays for replacing the 2D-index array nzb_s_inner in
213	! loops optimized for openACC (pres + flow_statistics)
214	!
215	! 1092 2013-02-02 11:24:22Z raasch
216	! unused variables removed
217	!
218	! 1069 2012-11-28 16:18:43Z maronga
219	! bugfix: added coupling_char to TOPOGRAPHY_DATA to allow topography in the
220	! ocean model in case of coupled runs
221	!
222	! 1036 2012-10-22 13:43:42Z raasch
223	! code put under GPL (PALM 3.9)
224	!
225	! 1015 2012-09-27 09:23:24Z raasch
226	! lower index for calculating wall_flags_0 set to nzb_w_inner instead of
227	! nzb_w_inner+1
228	!
229	! 996 2012-09-07 10:41:47Z raasch
230	! little reformatting
231	!
232	! 978 2012-08-09 08:28:32Z fricke
233	! Bugfix: nzb_max is set to nzt at non-cyclic lateral boundaries
234	! Bugfix: Set wall_flags_0 for inflow boundary
235	!
236	! 927 2012-06-06 19:15:04Z raasch
237	! Wall flags are not set for multigrid method in case of masking method
238	!
239	! 864 2012-03-27 15:10:33Z gryschka
240	! In case of ocean and Dirichlet bottom bc for u and v dzu_mg and ddzu_pres
241	! were not correctly defined for k=1.
242	!
243	! 861 2012-03-26 14:18:34Z suehring
244	! Set wall_flags_0. The array is needed for degradation in ws-scheme near walls,
245	! inflow and outflow boundaries as well as near the bottom and the top of the
246	! model domain.!
247	! Initialization of nzb_s_inner and nzb_w_inner.
248	! gls has to be at least nbgp to do not exceed the array bounds of nzb_local
249	! while setting wall_flags_0
250	!
251	! 843 2012-02-29 15:16:21Z gryschka
252	! In case of ocean and dirichlet bc for u and v at the bottom
253	! the first u-level ist defined at same height as the first w-level
254	!
255	! 818 2012-02-08 16:11:23Z maronga
256	! Bugfix: topo_height is only required if topography is used. It is thus now
257	! allocated in the topography branch
258	!
259	! 809 2012-01-30 13:32:58Z maronga
260	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
261	!
262	! 807 2012-01-25 11:53:51Z maronga
263	! New cpp directive "__check" implemented which is used by check_namelist_files
264	!
265	! Revision 1.1 1997/08/11 06:17:45 raasch
266	! Initial revision (Testversion)
267	!
268	!
269	! Description:
270	! -----------------------------------------------------------------------------!
271	!> Creating grid depending constants
272	!> @todo: Move initialization mixing length
273	!> @todo: Rearrange topo flag list
274	!> @todo: reference 3D buildings on top of orography is not tested and may need
275	!> further improvement for steep slopes
276	!> @todo: Use more advanced setting of building type at filled holes
277	!------------------------------------------------------------------------------!
278	SUBROUTINE init_grid
279
280	USE advec_ws, &
281	ONLY: ws_init_flags
282
283	USE arrays_3d, &
284	ONLY: dd2zu, ddzu, ddzu_pres, ddzw, dzu, dzw, zu, zw
285
286	USE control_parameters, &
287	ONLY: bc_lr_cyc, bc_ns_cyc, building_height, building_length_x, &
288	building_length_y, building_wall_left, building_wall_south, &
289	canyon_height, canyon_wall_left, canyon_wall_south, &
290	canyon_width_x, canyon_width_y, constant_flux_layer, &
291	dp_level_ind_b, dz, dz_max, dz_stretch_factor, &
292	dz_stretch_level, dz_stretch_level_index, grid_level, &
293	force_bound_l, force_bound_r, force_bound_n, force_bound_s, &
294	ibc_uv_b, inflow_l, inflow_n, inflow_r, inflow_s, &
295	masking_method, maximum_grid_level, message_string, &
296	momentum_advec, nest_domain, nest_bound_l, nest_bound_n, &
297	nest_bound_r, nest_bound_s, ocean, outflow_l, outflow_n, &
298	outflow_r, outflow_s, psolver, scalar_advec, topography, &
299	topography_grid_convention, tunnel_height, tunnel_length, &
300	tunnel_width_x, tunnel_width_y, tunnel_wall_depth, &
301	use_surface_fluxes, use_top_fluxes, wall_adjustment_factor
302
303	USE grid_variables, &
304	ONLY: ddx, ddx2, ddy, ddy2, dx, dx2, dy, dy2, zu_s_inner, zw_w_inner
305
306	USE indices, &
307	ONLY: nbgp, nx, nxl, nxlg, nxr, nxrg, ny, nyn, nyng, nys, nysg, nz, &
308	nzb, nzb_diff, nzb_diff_s_inner, nzb_diff_s_outer, &
309	nzb_max, nzb_s_inner, nzb_s_outer, nzb_u_inner, &
310	nzb_u_outer, nzb_v_inner, nzb_v_outer, nzb_w_inner, &
311	nzb_w_outer, nzt
312
313	USE kinds
314
315	USE pegrid
316
317	USE poismg_noopt_mod
318
319	USE surface_mod, &
320	ONLY: get_topography_top_index, get_topography_top_index_ji, init_bc
321
322	USE vertical_nesting_mod, &
323	ONLY: vnested, vnest_init_grid
324
325	IMPLICIT NONE
326
327	INTEGER(iwp) :: i !< index variable along x
328	INTEGER(iwp) :: j !< index variable along y
329	INTEGER(iwp) :: k !< index variable along z
330	INTEGER(iwp) :: k_top !< topography top index on local PE
331	INTEGER(iwp) :: l !< loop variable
332	INTEGER(iwp) :: nzb_local_max !< vertical grid index of maximum topography height
333	INTEGER(iwp) :: nzb_local_min !< vertical grid index of minimum topography height
334
335	INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: nzb_local !< index for topography top at cell-center
336	INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: nzb_tmp !< dummy to calculate topography indices on u- and v-grid
337
338	INTEGER(iwp), DIMENSION(:,:,:), ALLOCATABLE :: topo !< input array for 3D topography and dummy array for setting "outer"-flags
339
340	REAL(wp) :: dz_stretched !< stretched vertical grid spacing
341
342
343	!
344	!-- Calculation of horizontal array bounds including ghost layers
345	nxlg = nxl - nbgp
346	nxrg = nxr + nbgp
347	nysg = nys - nbgp
348	nyng = nyn + nbgp
349
350	!
351	!-- Allocate grid arrays
352	ALLOCATE( ddzu(1:nzt+1), ddzw(1:nzt+1), dd2zu(1:nzt), dzu(1:nzt+1), &
353	dzw(1:nzt+1), zu(nzb:nzt+1), zw(nzb:nzt+1) )
354
355	!
356	!-- Compute height of u-levels from constant grid length and dz stretch factors
357	IF ( dz == -1.0_wp ) THEN
358	message_string = 'missing dz'
359	CALL message( 'init_grid', 'PA0200', 1, 2, 0, 6, 0 )
360	ELSEIF ( dz <= 0.0_wp ) THEN
361	WRITE( message_string, * ) 'dz=',dz,' <= 0.0'
362	CALL message( 'init_grid', 'PA0201', 1, 2, 0, 6, 0 )
363	ENDIF
364
365	!
366	!-- Define the vertical grid levels
367	IF ( .NOT. ocean ) THEN
368	!
369	!-- Grid for atmosphere with surface at z=0 (k=0, w-grid).
370	!-- The second u-level (k=1) corresponds to the top of the
371	!-- Prandtl-layer.
372
373	IF ( ibc_uv_b == 0 .OR. ibc_uv_b == 2 ) THEN
374	zu(0) = 0.0_wp
375	! zu(0) = - dz * 0.5_wp
376	ELSE
377	zu(0) = - dz * 0.5_wp
378	ENDIF
379	zu(1) = dz * 0.5_wp
380
381	dz_stretch_level_index = nzt+1
382	dz_stretched = dz
383	DO k = 2, nzt+1
384	IF ( dz_stretch_level <= zu(k-1) .AND. dz_stretched < dz_max ) THEN
385	dz_stretched = dz_stretched * dz_stretch_factor
386	dz_stretched = MIN( dz_stretched, dz_max )
387	IF ( dz_stretch_level_index == nzt+1 ) dz_stretch_level_index = k-1
388	ENDIF
389	zu(k) = zu(k-1) + dz_stretched
390	ENDDO
391
392	!
393	!-- Compute the w-levels. They are always staggered half-way between the
394	!-- corresponding u-levels. In case of dirichlet bc for u and v at the
395	!-- ground the first u- and w-level (k=0) are defined at same height (z=0).
396	!-- The top w-level is extrapolated linearly.
397	zw(0) = 0.0_wp
398	DO k = 1, nzt
399	zw(k) = ( zu(k) + zu(k+1) ) * 0.5_wp
400	ENDDO
401	zw(nzt+1) = zw(nzt) + 2.0_wp * ( zu(nzt+1) - zw(nzt) )
402
403	ELSE
404	!
405	!-- Grid for ocean with free water surface is at k=nzt (w-grid).
406	!-- In case of neumann bc at the ground the first first u-level (k=0) lies
407	!-- below the first w-level (k=0). In case of dirichlet bc the first u- and
408	!-- w-level are defined at same height, but staggered from the second level.
409	!-- The second u-level (k=1) corresponds to the top of the Prandtl-layer.
410	zu(nzt+1) = dz * 0.5_wp
411	zu(nzt) = - dz * 0.5_wp
412
413	dz_stretch_level_index = 0
414	dz_stretched = dz
415	DO k = nzt-1, 0, -1
416	!
417	!-- The default value of dz_stretch_level is positive, thus the first
418	!-- condition is always true. Hence, the second condition is necessary.
419	IF ( dz_stretch_level >= zu(k+1) .AND. dz_stretch_level <= 0.0 &
420	.AND. dz_stretched < dz_max ) THEN
421	dz_stretched = dz_stretched * dz_stretch_factor
422	dz_stretched = MIN( dz_stretched, dz_max )
423	IF ( dz_stretch_level_index == 0 ) dz_stretch_level_index = k+1
424	ENDIF
425	zu(k) = zu(k+1) - dz_stretched
426	ENDDO
427
428	!
429	!-- Compute the w-levels. They are always staggered half-way between the
430	!-- corresponding u-levels, except in case of dirichlet bc for u and v
431	!-- at the ground. In this case the first u- and w-level are defined at
432	!-- same height. The top w-level (nzt+1) is not used but set for
433	!-- consistency, since w and all scalar variables are defined up tp nzt+1.
434	zw(nzt+1) = dz
435	zw(nzt) = 0.0_wp
436	DO k = 0, nzt
437	zw(k) = ( zu(k) + zu(k+1) ) * 0.5_wp
438	ENDDO
439
440	!
441	!-- In case of dirichlet bc for u and v the first u- and w-level are defined
442	!-- at same height.
443	IF ( ibc_uv_b == 0 ) THEN
444	zu(0) = zw(0)
445	ENDIF
446
447	ENDIF
448
449	!
450	!-- Compute grid lengths.
451	DO k = 1, nzt+1
452	dzu(k) = zu(k) - zu(k-1)
453	ddzu(k) = 1.0_wp / dzu(k)
454	dzw(k) = zw(k) - zw(k-1)
455	ddzw(k) = 1.0_wp / dzw(k)
456	ENDDO
457
458	DO k = 1, nzt
459	dd2zu(k) = 1.0_wp / ( dzu(k) + dzu(k+1) )
460	ENDDO
461
462	!
463	!-- The FFT- SOR-pressure solvers assume grid spacings of a staggered grid
464	!-- everywhere. For the actual grid, the grid spacing at the lowest level
465	!-- is only dz/2, but should be dz. Therefore, an additional array
466	!-- containing with appropriate grid information is created for these
467	!-- solvers.
468	IF ( psolver(1:9) /= 'multigrid' ) THEN
469	ALLOCATE( ddzu_pres(1:nzt+1) )
470	ddzu_pres = ddzu
471	ddzu_pres(1) = ddzu_pres(2) ! change for lowest level
472	ENDIF
473
474	!
475	!-- Compute the reciprocal values of the horizontal grid lengths.
476	ddx = 1.0_wp / dx
477	ddy = 1.0_wp / dy
478	dx2 = dx * dx
479	dy2 = dy * dy
480	ddx2 = 1.0_wp / dx2
481	ddy2 = 1.0_wp / dy2
482
483	!
484	!-- Allocate 3D array to set topography
485	ALLOCATE( topo(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
486	topo = 0
487	!
488	!-- Initialize topography by generic topography or read from topography from file.
489	CALL init_topo( topo )
490	!
491	!-- Set flags to mask topography on the grid.
492	CALL set_topo_flags( topo )
493	!
494	!-- Calculate wall flag arrays for the multigrid method.
495	!-- Please note, wall flags are only applied in the non-optimized version.
496	IF ( psolver == 'multigrid_noopt' ) CALL poismg_noopt_init
497
498	!
499	!-- Init flags for ws-scheme to degrade order of the numerics near walls, i.e.
500	!-- to decrease the numerical stencil appropriately.
501	IF ( momentum_advec == 'ws-scheme' .OR. scalar_advec == 'ws-scheme' ) &
502	CALL ws_init_flags
503
504	!
505	!-- Calculated grid-dependent as well as near-wall mixing length
506	CALL init_mixing_length
507
508	!
509	!-- Determine the maximum level of topography. It is used for
510	!-- steering the degradation of order of the applied advection scheme,
511	!-- as well in the lpm.
512	!-- In case of non-cyclic lateral boundaries, the order of the advection
513	!-- scheme has to be reduced up to nzt (required at the lateral boundaries).
514	k_top = 0
515	DO i = nxl, nxr
516	DO j = nys, nyn
517	DO k = nzb, nzt + 1
518	k_top = MAX( k_top, MERGE( k, 0, &
519	.NOT. BTEST( topo(k,j,i), 0 ) ) )
520	ENDDO
521	ENDDO
522	ENDDO
523	#if defined( __parallel )
524	CALL MPI_ALLREDUCE( k_top + 1, nzb_max, 1, MPI_INTEGER, & !is +1 really necessary here?
525	MPI_MAX, comm2d, ierr )
526	#else
527	nzb_max = k_top + 1
528	#endif
529	IF ( inflow_l .OR. outflow_l .OR. force_bound_l .OR. nest_bound_l .OR.&
530	inflow_r .OR. outflow_r .OR. force_bound_r .OR. nest_bound_r .OR.&
531	inflow_n .OR. outflow_n .OR. force_bound_n .OR. nest_bound_n .OR.&
532	inflow_s .OR. outflow_s .OR. force_bound_s .OR. nest_bound_s ) &
533	nzb_max = nzt
534	!
535	!-- Finally, if topography extents up to the model top, limit nzb_max to nzt.
536	nzb_max = MIN( nzb_max, nzt )
537
538	!
539	!-- Initialize boundary conditions via surface type
540	CALL init_bc
541
542	!
543	!-- Allocate and set topography height arrays required for data output
544	IF ( TRIM( topography ) /= 'flat' ) THEN
545	!
546	!-- Allocate and set the arrays containing the topography height
547	IF ( nxr == nx .AND. nyn /= ny ) THEN
548	ALLOCATE( zu_s_inner(nxl:nxr+1,nys:nyn), &
549	zw_w_inner(nxl:nxr+1,nys:nyn) )
550	ELSEIF ( nxr /= nx .AND. nyn == ny ) THEN
551	ALLOCATE( zu_s_inner(nxl:nxr,nys:nyn+1), &
552	zw_w_inner(nxl:nxr,nys:nyn+1) )
553	ELSEIF ( nxr == nx .AND. nyn == ny ) THEN
554	ALLOCATE( zu_s_inner(nxl:nxr+1,nys:nyn+1), &
555	zw_w_inner(nxl:nxr+1,nys:nyn+1) )
556	ELSE
557	ALLOCATE( zu_s_inner(nxl:nxr,nys:nyn), &
558	zw_w_inner(nxl:nxr,nys:nyn) )
559	ENDIF
560
561	zu_s_inner = 0.0_wp
562	zw_w_inner = 0.0_wp
563	!
564	!-- Determine local topography height on scalar and w-grid. Note, setting
565	!-- lateral boundary values is not necessary, realized via wall_flags_0
566	!-- array. Further, please note that loop bounds are different from
567	!-- nxl to nxr and nys to nyn on south and right model boundary, hence,
568	!-- use intrinsic lbound and ubound functions to infer array bounds.
569	DO i = LBOUND(zu_s_inner, 1), UBOUND(zu_s_inner, 1)
570	DO j = LBOUND(zu_s_inner, 2), UBOUND(zu_s_inner, 2)
571	!
572	!-- Topography height on scalar grid. Therefore, determine index of
573	!-- upward-facing surface element on scalar grid.
574	zu_s_inner(i,j) = zu( get_topography_top_index_ji( j, i, 's' ) )
575	!
576	!-- Topography height on w grid. Therefore, determine index of
577	!-- upward-facing surface element on w grid.
578	zw_w_inner(i,j) = zw( get_topography_top_index_ji( j, i, 's' ) )
579	ENDDO
580	ENDDO
581	ENDIF
582
583	!
584	!-- In the following, calculate 2D index arrays. Note, these will be removed
585	!-- soon.
586	!-- Allocate outer and inner index arrays for topography and set
587	!-- defaults.
588	ALLOCATE( nzb_s_inner(nysg:nyng,nxlg:nxrg), &
589	nzb_s_outer(nysg:nyng,nxlg:nxrg), &
590	nzb_u_inner(nysg:nyng,nxlg:nxrg), &
591	nzb_u_outer(nysg:nyng,nxlg:nxrg), &
592	nzb_v_inner(nysg:nyng,nxlg:nxrg), &
593	nzb_v_outer(nysg:nyng,nxlg:nxrg), &
594	nzb_w_inner(nysg:nyng,nxlg:nxrg), &
595	nzb_w_outer(nysg:nyng,nxlg:nxrg), &
596	nzb_diff_s_inner(nysg:nyng,nxlg:nxrg), &
597	nzb_diff_s_outer(nysg:nyng,nxlg:nxrg), &
598	nzb_local(nysg:nyng,nxlg:nxrg), &
599	nzb_tmp(nysg:nyng,nxlg:nxrg) )
600	!
601	!-- Initialize 2D-index arrays. Note, these will be removed soon!
602	nzb_local(nys:nyn,nxl:nxr) = get_topography_top_index( 's' )
603	CALL exchange_horiz_2d_int( nzb_local, nys, nyn, nxl, nxr, nbgp )
604
605	IF ( TRIM( topography ) /= 'flat' ) THEN
606	#if defined( __parallel )
607	CALL MPI_ALLREDUCE( MAXVAL( get_topography_top_index( 's' ) ), &
608	nzb_local_max, 1, MPI_INTEGER, MPI_MAX, comm2d, ierr )
609	CALL MPI_ALLREDUCE( MINVAL( get_topography_top_index( 's' ) ), &
610	nzb_local_min, 1, MPI_INTEGER, MPI_MIN, comm2d, ierr )
611	#else
612	nzb_local_max = MAXVAL( get_topography_top_index( 's' ) )
613	nzb_local_min = MINVAL( get_topography_top_index( 's' ) )
614	#endif
615	!
616	!-- Consistency checks
617	IF ( nzb_local_min < 0 .OR. nzb_local_max > nz + 1 ) THEN
618	WRITE( message_string, * ) 'nzb_local values are outside the', &
619	'model domain', &
620	'&MINVAL( nzb_local ) = ', nzb_local_min, &
621	'&MAXVAL( nzb_local ) = ', nzb_local_max
622	CALL message( 'init_grid', 'PA0210', 1, 2, 0, 6, 0 )
623	ENDIF
624	ENDIF
625
626	nzb_s_inner = nzb; nzb_s_outer = nzb
627	nzb_u_inner = nzb; nzb_u_outer = nzb
628	nzb_v_inner = nzb; nzb_v_outer = nzb
629	nzb_w_inner = nzb; nzb_w_outer = nzb
630
631	!
632	!-- Define vertical gridpoint from (or to) which on the usual finite difference
633	!-- form (which does not use surface fluxes) is applied
634	IF ( constant_flux_layer .OR. use_surface_fluxes ) THEN
635	nzb_diff = nzb + 2
636	ELSE
637	nzb_diff = nzb + 1
638	ENDIF
639
640	nzb_diff_s_inner = nzb_diff; nzb_diff_s_outer = nzb_diff
641	!
642	!-- Set Neumann conditions for topography. Will be removed soon.
643	IF ( .NOT. bc_ns_cyc ) THEN
644	IF ( nys == 0 ) THEN
645	nzb_local(-1,:) = nzb_local(0,:)
646	ELSEIF ( nyn == ny ) THEN
647	nzb_local(ny+1,:) = nzb_local(ny,:)
648	ENDIF
649	ENDIF
650
651	IF ( .NOT. bc_lr_cyc ) THEN
652	IF ( nxl == 0 ) THEN
653	nzb_local(:,-1) = nzb_local(:,0)
654	nzb_local(:,-2) = nzb_local(:,0)
655	nzb_local(:,-3) = nzb_local(:,0)
656	ELSEIF ( nxr == nx ) THEN
657	nzb_local(:,nx+1) = nzb_local(:,nx)
658	nzb_local(:,nx+2) = nzb_local(:,nx)
659	nzb_local(:,nx+3) = nzb_local(:,nx)
660	ENDIF
661	ENDIF
662	!
663	!-- Initialization of 2D index arrays, will be removed soon!
664	!-- Initialize nzb_s_inner and nzb_w_inner
665	nzb_s_inner = nzb_local
666	nzb_w_inner = nzb_local
667
668	!
669	!-- Initialize remaining index arrays:
670	!-- first pre-initialize them with nzb_s_inner...
671	nzb_u_inner = nzb_s_inner
672	nzb_u_outer = nzb_s_inner
673	nzb_v_inner = nzb_s_inner
674	nzb_v_outer = nzb_s_inner
675	nzb_w_outer = nzb_s_inner
676	nzb_s_outer = nzb_s_inner
677
678	!
679	!-- nzb_s_outer:
680	!-- extend nzb_local east-/westwards first, then north-/southwards
681	nzb_tmp = nzb_local
682	DO j = nys, nyn
683	DO i = nxl, nxr
684	nzb_tmp(j,i) = MAX( nzb_local(j,i-1), nzb_local(j,i), &
685	nzb_local(j,i+1) )
686	ENDDO
687	ENDDO
688
689	CALL exchange_horiz_2d_int( nzb_tmp, nys, nyn, nxl, nxr, nbgp )
690
691	DO i = nxl, nxr
692	DO j = nys, nyn
693	nzb_s_outer(j,i) = MAX( nzb_tmp(j-1,i), nzb_tmp(j,i), &
694	nzb_tmp(j+1,i) )
695	ENDDO
696	!
697	!-- non-cyclic boundary conditions (overwritten by call of
698	!-- exchange_horiz_2d_int below in case of cyclic boundary conditions)
699	IF ( nys == 0 ) THEN
700	j = -1
701	nzb_s_outer(j,i) = MAX( nzb_tmp(j+1,i), nzb_tmp(j,i) )
702	ENDIF
703	IF ( nyn == ny ) THEN
704	j = ny + 1
705	nzb_s_outer(j,i) = MAX( nzb_tmp(j-1,i), nzb_tmp(j,i) )
706	ENDIF
707	ENDDO
708	!
709	!-- nzb_w_outer:
710	!-- identical to nzb_s_outer
711	nzb_w_outer = nzb_s_outer
712	!
713	!-- nzb_u_inner:
714	!-- extend nzb_local rightwards only
715	nzb_tmp = nzb_local
716	DO j = nys, nyn
717	DO i = nxl, nxr
718	nzb_tmp(j,i) = MAX( nzb_local(j,i-1), nzb_local(j,i) )
719	ENDDO
720	ENDDO
721
722	CALL exchange_horiz_2d_int( nzb_tmp, nys, nyn, nxl, nxr, nbgp )
723
724	nzb_u_inner = nzb_tmp
725	!
726	!-- nzb_u_outer:
727	!-- extend current nzb_tmp (nzb_u_inner) north-/southwards
728	DO i = nxl, nxr
729	DO j = nys, nyn
730	nzb_u_outer(j,i) = MAX( nzb_tmp(j-1,i), nzb_tmp(j,i), &
731	nzb_tmp(j+1,i) )
732	ENDDO
733	!
734	!-- non-cyclic boundary conditions (overwritten by call of
735	!-- exchange_horiz_2d_int below in case of cyclic boundary conditions)
736	IF ( nys == 0 ) THEN
737	j = -1
738	nzb_u_outer(j,i) = MAX( nzb_tmp(j+1,i), nzb_tmp(j,i) )
739	ENDIF
740	IF ( nyn == ny ) THEN
741	j = ny + 1
742	nzb_u_outer(j,i) = MAX( nzb_tmp(j-1,i), nzb_tmp(j,i) )
743	ENDIF
744	ENDDO
745
746	!
747	!-- nzb_v_inner:
748	!-- extend nzb_local northwards only
749	nzb_tmp = nzb_local
750	DO i = nxl, nxr
751	DO j = nys, nyn
752	nzb_tmp(j,i) = MAX( nzb_local(j-1,i), nzb_local(j,i) )
753	ENDDO
754	ENDDO
755
756	CALL exchange_horiz_2d_int( nzb_tmp, nys, nyn, nxl, nxr, nbgp )
757	nzb_v_inner = nzb_tmp
758
759	!
760	!-- nzb_v_outer:
761	!-- extend current nzb_tmp (nzb_v_inner) right-/leftwards
762	DO j = nys, nyn
763	DO i = nxl, nxr
764	nzb_v_outer(j,i) = MAX( nzb_tmp(j,i-1), nzb_tmp(j,i), &
765	nzb_tmp(j,i+1) )
766	ENDDO
767	!
768	!-- non-cyclic boundary conditions (overwritten by call of
769	!-- exchange_horiz_2d_int below in case of cyclic boundary conditions)
770	IF ( nxl == 0 ) THEN
771	i = -1
772	nzb_v_outer(j,i) = MAX( nzb_tmp(j,i+1), nzb_tmp(j,i) )
773	ENDIF
774	IF ( nxr == nx ) THEN
775	i = nx + 1
776	nzb_v_outer(j,i) = MAX( nzb_tmp(j,i-1), nzb_tmp(j,i) )
777	ENDIF
778	ENDDO
779
780	!
781	!-- Exchange of lateral boundary values (parallel computers) and cyclic
782	!-- boundary conditions, if applicable.
783	!-- Since nzb_s_inner and nzb_w_inner are derived directly from nzb_local
784	!-- they do not require exchange and are not included here.
785	CALL exchange_horiz_2d_int( nzb_u_inner, nys, nyn, nxl, nxr, nbgp )
786	CALL exchange_horiz_2d_int( nzb_u_outer, nys, nyn, nxl, nxr, nbgp )
787	CALL exchange_horiz_2d_int( nzb_v_inner, nys, nyn, nxl, nxr, nbgp )
788	CALL exchange_horiz_2d_int( nzb_v_outer, nys, nyn, nxl, nxr, nbgp )
789	CALL exchange_horiz_2d_int( nzb_w_outer, nys, nyn, nxl, nxr, nbgp )
790	CALL exchange_horiz_2d_int( nzb_s_outer, nys, nyn, nxl, nxr, nbgp )
791
792	!
793	!-- Set the individual index arrays which define the k index from which on
794	!-- the usual finite difference form (which does not use surface fluxes) is
795	!-- applied
796	IF ( constant_flux_layer .OR. use_surface_fluxes ) THEN
797	nzb_diff_s_inner = nzb_s_inner + 2
798	nzb_diff_s_outer = nzb_s_outer + 2
799	ELSE
800	nzb_diff_s_inner = nzb_s_inner + 1
801	nzb_diff_s_outer = nzb_s_outer + 1
802	ENDIF
803	!
804	!-- Vertical nesting: communicate vertical grid level arrays between fine and
805	!-- coarse grid
806	IF ( vnested ) CALL vnest_init_grid
807
808	END SUBROUTINE init_grid
809
810	! Description:
811	! -----------------------------------------------------------------------------!
812	!> Set temporary topography flags and reference buildings on top of underlying
813	!> orography.
814	!------------------------------------------------------------------------------!
815	SUBROUTINE process_topography( topo_3d )
816
817	USE arrays_3d, &
818	ONLY: zu, zw
819
820	USE control_parameters, &
821	ONLY: bc_lr_cyc, bc_ns_cyc, land_surface, ocean, urban_surface
822
823	USE indices, &
824	ONLY: nbgp, nx, nxl, nxlg, nxr, nxrg, ny, nyn, nyng, nys, nysg, nzb, &
825	nzt
826
827	USE netcdf_data_input_mod, &
828	ONLY: buildings_f, building_id_f, input_pids_static, &
829	terrain_height_f
830
831	USE kinds
832
833	USE pegrid
834
835	IMPLICIT NONE
836
837	INTEGER(iwp) :: i !< running index along x-direction
838	INTEGER(iwp) :: j !< running index along y-direction
839	INTEGER(iwp) :: k !< running index along z-direction with respect to numeric grid
840	INTEGER(iwp) :: k2 !< running index along z-direction with respect to netcdf grid
841	INTEGER(iwp) :: k_surf !< orography top index, used to map 3D buildings onto terrain
842	INTEGER(iwp) :: nr !< index variable indication maximum terrain height for respective building ID
843	INTEGER(iwp) :: num_build !< counter for number of buildings
844
845	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: displace_dum !< displacements of start addresses, used for MPI_ALLGATHERV
846	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids !< building IDs on entire model domain
847	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids_final !< building IDs on entire model domain, multiple occurences are sorted out
848	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids_final_tmp !< temporary array used for resizing
849	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids_l !< building IDs on local subdomain
850	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids_l_tmp !< temporary array used to resize array of building IDs
851
852	INTEGER(iwp), DIMENSION(0:numprocs-1) :: num_buildings !< number of buildings with different ID on entire model domain
853	INTEGER(iwp), DIMENSION(0:numprocs-1) :: num_buildings_l !< number of buildings with different ID on local subdomain
854
855	INTEGER(iwp), DIMENSION(nzb:nzt+1,nysg:nyng,nxlg:nxrg) :: topo_3d !< input array for 3D topography and dummy array for setting "outer"-flags
856
857	REAL(wp) :: ocean_offset !< offset to consider inverse vertical coordinate at topography definition
858	REAL(wp), DIMENSION(:), ALLOCATABLE :: oro_max !< maximum terrain height occupied by an building with certain id
859	REAL(wp), DIMENSION(:), ALLOCATABLE :: oro_max_l !< maximum terrain height occupied by an building with certain id, on local subdomain
860
861	!
862	!-- In the following, buildings and orography are further preprocessed
863	!-- before they are mapped on the LES grid.
864	!-- Buildings are mapped on top of the orography by maintaining the roof
865	!-- shape of the building. This can be achieved by referencing building on
866	!-- top of the maximum terrain height within the area occupied by the
867	!-- respective building. As buildings and terrain height are defined PE-wise,
868	!-- parallelization of this referencing is required (a building can be
869	!-- distributed between different PEs).
870	!-- In a first step, determine the number of buildings with different
871	!-- building id on each PE. In a next step, all building ids are gathered
872	!-- into one array which is present to all PEs. For each building ID,
873	!-- the maximum terrain height occupied by the respective building is
874	!-- computed and distributed to each PE.
875	!-- Finally, for each building id and its respective reference orography,
876	!-- builidings are mapped on top.
877	!--
878	!-- First, pre-set topography flags, bit 1 indicates orography, bit 2
879	!-- buildings
880	!-- classify the respective surfaces.
881	topo_3d = IBSET( topo_3d, 0 )
882	topo_3d(nzb,:,:) = IBCLR( topo_3d(nzb,:,:), 0 )
883	!
884	!-- Reference buildings on top of orography. This is not necessary
885	!-- if topography is read from ASCII file as no distinction between buildings
886	!-- and terrain height can be made. Moreover, this is also not necessary if
887	!-- urban-surface and land-surface model are used at the same time.
888	IF ( input_pids_static ) THEN
889	num_buildings_l = 0
890	num_buildings = 0
891	!
892	!-- Allocate at least one element for building ids,
893	ALLOCATE( build_ids_l(1) )
894	DO i = nxl, nxr
895	DO j = nys, nyn
896	IF ( building_id_f%var(j,i) /= building_id_f%fill ) THEN
897	IF ( num_buildings_l(myid) > 0 ) THEN
898	IF ( ANY( building_id_f%var(j,i) .EQ. build_ids_l ) ) THEN
899	CYCLE
900	ELSE
901	num_buildings_l(myid) = num_buildings_l(myid) + 1
902	!
903	!-- Resize array with different local building ids
904	ALLOCATE( build_ids_l_tmp(1:SIZE(build_ids_l)) )
905	build_ids_l_tmp = build_ids_l
906	DEALLOCATE( build_ids_l )
907	ALLOCATE( build_ids_l(1:num_buildings_l(myid)) )
908	build_ids_l(1:num_buildings_l(myid)-1) = &
909	build_ids_l_tmp(1:num_buildings_l(myid)-1)
910	build_ids_l(num_buildings_l(myid)) = building_id_f%var(j,i)
911	DEALLOCATE( build_ids_l_tmp )
912	ENDIF
913	!
914	!-- First occuring building id on PE
915	ELSE
916	num_buildings_l(myid) = num_buildings_l(myid) + 1
917	build_ids_l(1) = building_id_f%var(j,i)
918	ENDIF
919	ENDIF
920	ENDDO
921	ENDDO
922	!
923	!-- Determine number of different building ids for the entire domain
924	#if defined( __parallel )
925	CALL MPI_ALLREDUCE( num_buildings_l, num_buildings, numprocs, &
926	MPI_INTEGER, MPI_SUM, comm2d, ierr )
927	#else
928	num_buildings = num_buildings_l
929	#endif
930	!
931	!-- Gather all buildings ids on each PEs.
932	!-- First, allocate array encompassing all building ids in model domain.
933	ALLOCATE( build_ids(1:SUM(num_buildings)) )
934	#if defined( __parallel )
935	!
936	!-- Allocate array for displacements.
937	!-- As each PE may has a different number of buildings, so that
938	!-- the block sizes send by each PE may not be equal. Hence,
939	!-- information about the respective displacement is required, indicating
940	!-- the respective adress where each MPI-task writes into the receive
941	!-- buffer array
942	ALLOCATE( displace_dum(0:numprocs-1) )
943	displace_dum(0) = 0
944	DO i = 1, numprocs-1
945	displace_dum(i) = displace_dum(i-1) + num_buildings(i-1)
946	ENDDO
947
948	CALL MPI_ALLGATHERV( build_ids_l(1:num_buildings_l(myid)), &
949	num_buildings(myid), &
950	MPI_INTEGER, &
951	build_ids, &
952	num_buildings, &
953	displace_dum, &
954	MPI_INTEGER, &
955	comm2d, ierr )
956
957	DEALLOCATE( displace_dum )
958
959	#else
960	build_ids = build_ids_l
961	#endif
962
963	!
964	!-- Note, in parallel mode building ids can occure mutliple times, as
965	!-- each PE has send its own ids. Therefore, sort out building ids which
966	!-- appear more than one time.
967	num_build = 0
968	DO nr = 1, SIZE(build_ids)
969
970	IF ( ALLOCATED(build_ids_final) ) THEN
971	IF ( ANY( build_ids(nr) .EQ. build_ids_final ) ) THEN
972	CYCLE
973	ELSE
974	num_build = num_build + 1
975	!
976	!-- Resize
977	ALLOCATE( build_ids_final_tmp(1:num_build) )
978	build_ids_final_tmp(1:num_build-1) = build_ids_final(1:num_build-1)
979	DEALLOCATE( build_ids_final )
980	ALLOCATE( build_ids_final(1:num_build) )
981	build_ids_final(1:num_build-1) = build_ids_final_tmp(1:num_build-1)
982	build_ids_final(num_build) = build_ids(nr)
983	DEALLOCATE( build_ids_final_tmp )
984	ENDIF
985	ELSE
986	num_build = num_build + 1
987	ALLOCATE( build_ids_final(1:num_build) )
988	build_ids_final(num_build) = build_ids(nr)
989	ENDIF
990	ENDDO
991
992	!
993	!-- Finally, determine maximumum terrain height occupied by the
994	!-- respective building. First, on each PE locally.
995	ALLOCATE( oro_max_l(1:SIZE(build_ids_final)) )
996	ALLOCATE( oro_max(1:SIZE(build_ids_final)) )
997	oro_max_l = 0.0_wp
998
999	DO nr = 1, SIZE(build_ids_final)
1000	oro_max_l(nr) = MAXVAL( &
1001	MERGE( terrain_height_f%var, 0.0_wp, &
1002	building_id_f%var(nys:nyn,nxl:nxr) .EQ. &
1003	build_ids_final(nr) ) )
1004	ENDDO
1005
1006	#if defined( __parallel )
1007	IF ( SIZE(build_ids_final) >= 1 ) THEN
1008	CALL MPI_ALLREDUCE( oro_max_l, oro_max, SIZE( oro_max ), MPI_REAL, &
1009	MPI_MAX, comm2d, ierr )
1010	ENDIF
1011	#else
1012	oro_max = oro_max_l
1013	#endif
1014	!
1015	!-- Map orography as well as buildings on grid.
1016	!-- In case of ocean simulations, add an offset.
1017	ocean_offset = MERGE( zw(0), 0.0_wp, ocean )
1018	DO i = nxl, nxr
1019	DO j = nys, nyn
1020	DO k = nzb, nzt
1021	!
1022	!-- In a first step, if grid point is below or equal the given
1023	!-- terrain height, grid point is flagged to be of type natural.
1024	!-- Please note, in case there is also a building which is lower
1025	!-- than the vertical grid spacing, initialization of surface
1026	!-- attributes will not be correct as given surface information
1027	!-- will not be in accordance to the classified grid points.
1028	!-- Hence, in this case, de-flag the grid point and give it
1029	!-- urban type instead.
1030	IF ( zu(k) - ocean_offset <= terrain_height_f%var(j,i) ) THEN
1031	topo_3d(k,j,i) = IBCLR( topo_3d(k,j,i), 0 )
1032	topo_3d(k,j,i) = IBSET( topo_3d(k,j,i), 1 )
1033	ENDIF
1034	!
1035	!-- Set building grid points. Here, only consider 2D buildings.
1036	!-- 3D buildings require separate treatment.
1037	IF ( buildings_f%lod == 1 ) THEN
1038	IF ( building_id_f%var(j,i) /= building_id_f%fill ) THEN
1039	!
1040	!-- Determine index where maximum terrain height occupied by
1041	!-- the respective building height is stored.
1042	nr = MINLOC( ABS( build_ids_final - &
1043	building_id_f%var(j,i) ), DIM = 1 )
1044
1045	IF ( zu(k) - ocean_offset <= &
1046	oro_max(nr) + buildings_f%var_2d(j,i) ) THEN
1047	topo_3d(k,j,i) = IBCLR( topo_3d(k,j,i), 0 )
1048	topo_3d(k,j,i) = IBSET( topo_3d(k,j,i), 2 )
1049	!
1050	!-- De-flag grid point of type natural. See comment above.
1051	topo_3d(k,j,i) = IBCLR( topo_3d(k,j,i), 1 )
1052	ENDIF
1053	ENDIF
1054	ENDIF
1055	ENDDO
1056	!
1057	!-- Map 3D buildings onto terrain height.
1058	IF ( buildings_f%lod == 2 ) THEN
1059	IF ( building_id_f%var(j,i) /= building_id_f%fill ) THEN
1060	!
1061	!-- Determine topo index occupied by terrain
1062	k_surf = MAXLOC( MERGE( 1, 0, &
1063	.NOT. BTEST( topo_3d(:,j,i), 0 ) ), &
1064	DIM = 1 ) - 1
1065	k2 = nzb+1
1066	DO k = k_surf + 1, nzt + 1
1067	IF ( k2 <= buildings_f%nz-1 ) THEN
1068	IF ( buildings_f%var_3d(k2,j,i) == 1 ) THEN
1069	topo_3d(k,j,i) = IBCLR( topo_3d(k,j,i), 0 )
1070	topo_3d(k,j,i) = IBSET( topo_3d(k,j,i), 2 )
1071	ENDIF
1072	ENDIF
1073	k2 = k2 + 1
1074	ENDDO
1075	ENDIF
1076	ENDIF
1077	ENDDO
1078	ENDDO
1079	!
1080	!-- Deallocate temporary arrays required for processing and reading data
1081	IF ( ALLOCATED( oro_max ) ) DEALLOCATE( oro_max )
1082	IF ( ALLOCATED( oro_max_l ) ) DEALLOCATE( oro_max_l )
1083	IF ( ALLOCATED( build_ids_final ) ) DEALLOCATE( build_ids_final )
1084	!
1085	!-- Topography input via ASCII format.
1086	ELSE
1087	ocean_offset = MERGE( zw(0), 0.0_wp, ocean )
1088	topo_3d = IBSET( topo_3d, 0 )
1089	topo_3d(nzb,:,:) = IBCLR( topo_3d(nzb,:,:), 0 )
1090	DO i = nxl, nxr
1091	DO j = nys, nyn
1092	DO k = nzb, nzt
1093	IF ( zu(k) - ocean_offset <= buildings_f%var_2d(j,i) ) THEN
1094	topo_3d(k,j,i) = IBCLR( topo_3d(k,j,i), 0 )
1095	topo_3d(k,j,i) = IBSET( topo_3d(k,j,i), 2 ) !indicates terrain
1096	ENDIF
1097	ENDDO
1098	ENDDO
1099	ENDDO
1100	ENDIF
1101
1102	CALL exchange_horiz_int( topo_3d, nys, nyn, nxl, nxr, nzt, nbgp )
1103
1104	IF ( .NOT. bc_ns_cyc ) THEN
1105	IF ( nys == 0 ) topo_3d(:,-1,:) = topo_3d(:,0,:)
1106	IF ( nyn == ny ) topo_3d(:,ny+1,:) = topo_3d(:,ny,:)
1107	ENDIF
1108
1109	IF ( .NOT. bc_lr_cyc ) THEN
1110	IF ( nxl == 0 ) topo_3d(:,:,-1) = topo_3d(:,:,0)
1111	IF ( nxr == nx ) topo_3d(:,:,nx+1) = topo_3d(:,:,nx)
1112	ENDIF
1113
1114	END SUBROUTINE process_topography
1115
1116
1117	! Description:
1118	! -----------------------------------------------------------------------------!
1119	!> Filter topography, i.e. fill holes resolved by only one grid point.
1120	!> Such holes are suspected to lead to velocity blow-ups as continuity
1121	!> equation on discrete grid cannot be fulfilled in such case.
1122	!------------------------------------------------------------------------------!
1123	SUBROUTINE filter_topography( topo_3d )
1124
1125	USE control_parameters, &
1126	ONLY: bc_lr_cyc, bc_ns_cyc, message_string
1127
1128	USE indices, &
1129	ONLY: nbgp, nx, nxl, nxlg, nxr, nxrg, ny, nyn, nyng, nys, nysg, nzb, nzt
1130
1131	USE netcdf_data_input_mod, &
1132	ONLY: building_id_f, building_type_f
1133
1134	USE pegrid
1135
1136	IMPLICIT NONE
1137
1138	INTEGER(iwp) :: i !< running index along x-direction
1139	INTEGER(iwp) :: it !< counter for number of iterations
1140	INTEGER(iwp) :: j !< running index along y-direction
1141	INTEGER(iwp) :: k !< running index along z-direction
1142	INTEGER(iwp) :: num_hole !< number of holes (in topography) resolved by only one grid point
1143	INTEGER(iwp) :: num_hole_l !< number of holes (in topography) resolved by only one grid point on local PE
1144	INTEGER(iwp) :: num_wall !< number of surrounding vertical walls for a single grid point
1145
1146	INTEGER(iwp), DIMENSION(:,:,:), ALLOCATABLE :: topo_tmp !< temporary 3D-topography used to fill holes
1147	INTEGER(iwp), DIMENSION(nzb:nzt+1,nysg:nyng,nxlg:nxrg) :: topo_3d !< 3D-topography array merging buildings and orography
1148	!
1149	!-- Before checking for holes, set lateral boundary conditions for
1150	!-- topography. After hole-filling, boundary conditions must be set again.
1151	!-- Several iterations are performed, in order to fill holes which might
1152	!-- emerge by the filling-algorithm itself.
1153	ALLOCATE( topo_tmp(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
1154	topo_tmp = 0
1155
1156	num_hole = 99999
1157	it = 0
1158	DO WHILE ( num_hole > 0 )
1159
1160	num_hole = 0
1161	CALL exchange_horiz_int( topo_3d, nys, nyn, nxl, nxr, nzt, nbgp )
1162
1163	topo_tmp = topo_3d
1164	!
1165	!-- In case of non-cyclic lateral boundaries, assume lateral boundary to be
1166	!-- a solid wall. Thus, intermediate spaces of one grid point between
1167	!-- boundary and some topographic structure will be filled.
1168	IF ( .NOT. bc_ns_cyc ) THEN
1169	IF ( nys == 0 ) topo_tmp(:,-1,:) = IBCLR( topo_tmp(:,0,:), 0 )
1170	IF ( nyn == ny ) topo_tmp(:,ny+1,:) = IBCLR( topo_tmp(:,ny,:), 0 )
1171	ENDIF
1172
1173	IF ( .NOT. bc_lr_cyc ) THEN
1174	IF ( nxl == 0 ) topo_tmp(:,:,-1) = IBCLR( topo_tmp(:,:,0), 0 )
1175	IF ( nxr == nx ) topo_tmp(:,:,nx+1) = IBCLR( topo_tmp(:,:,nx), 0 )
1176	ENDIF
1177
1178	it = it + 1
1179	num_hole_l = 0
1180	DO i = nxl, nxr
1181	DO j = nys, nyn
1182	DO k = nzb+1, nzt
1183	IF ( BTEST( topo_tmp(k,j,i), 0 ) ) THEN
1184	num_wall = 0
1185	IF ( .NOT. BTEST( topo_tmp(k,j-1,i), 0 ) ) &
1186	num_wall = num_wall + 1
1187	IF ( .NOT. BTEST( topo_tmp(k,j+1,i), 0 ) ) &
1188	num_wall = num_wall + 1
1189	IF ( .NOT. BTEST( topo_tmp(k,j,i-1), 0 ) ) &
1190	num_wall = num_wall + 1
1191	IF ( .NOT. BTEST( topo_tmp(k,j,i+1), 0 ) ) &
1192	num_wall = num_wall + 1
1193	IF ( .NOT. BTEST( topo_tmp(k-1,j,i), 0 ) ) &
1194	num_wall = num_wall + 1
1195	IF ( .NOT. BTEST( topo_tmp(k+1,j,i), 0 ) ) &
1196	num_wall = num_wall + 1
1197
1198	IF ( num_wall >= 4 ) THEN
1199	num_hole_l = num_hole_l + 1
1200	!
1201	!-- Clear flag 0 and set special flag ( bit 3) to indicate
1202	!-- that new topography point is a result of filtering process.
1203	topo_3d(k,j,i) = IBCLR( topo_3d(k,j,i), 0 )
1204	topo_3d(k,j,i) = IBSET( topo_3d(k,j,i), 3 )
1205	!
1206	!-- If filled grid point is occupied by a building, classify
1207	!-- it as building grid point.
1208	IF ( building_type_f%from_file ) THEN
1209	IF ( building_type_f%var(j,i) /= &
1210	building_type_f%fill .OR. &
1211	building_type_f%var(j+1,i) /= &
1212	building_type_f%fill .OR. &
1213	building_type_f%var(j-1,i) /= &
1214	building_type_f%fill .OR. &
1215	building_type_f%var(j,i+1) /= &
1216	building_type_f%fill .OR. &
1217	building_type_f%var(j,i-1) /= &
1218	building_type_f%fill ) THEN
1219	!
1220	!-- Set flag indicating building surfaces
1221	topo_3d(k,j,i) = IBSET( topo_3d(k,j,i), 2 )
1222	!
1223	!-- Set building_type and ID at this position if not
1224	!-- already set. This is required for proper
1225	!-- initialization of urban-surface energy balance
1226	!-- solver.
1227	IF ( building_type_f%var(j,i) == &
1228	building_type_f%fill ) THEN
1229
1230	IF ( building_type_f%var(j+1,i) /= &
1231	building_type_f%fill ) THEN
1232	building_type_f%var(j,i) = &
1233	building_type_f%var(j+1,i)
1234	building_id_f%var(j,i) = &
1235	building_id_f%var(j+1,i)
1236	ELSEIF ( building_type_f%var(j-1,i) /= &
1237	building_type_f%fill ) THEN
1238	building_type_f%var(j,i) = &
1239	building_type_f%var(j-1,i)
1240	building_id_f%var(j,i) = &
1241	building_id_f%var(j-1,i)
1242	ELSEIF ( building_type_f%var(j,i+1) /= &
1243	building_type_f%fill ) THEN
1244	building_type_f%var(j,i) = &
1245	building_type_f%var(j,i+1)
1246	building_id_f%var(j,i) = &
1247	building_id_f%var(j,i+1)
1248	ELSEIF ( building_type_f%var(j,i-1) /= &
1249	building_type_f%fill ) THEN
1250	building_type_f%var(j,i) = &
1251	building_type_f%var(j,i-1)
1252	building_id_f%var(j,i) = &
1253	building_id_f%var(j,i-1)
1254	ENDIF
1255	ENDIF
1256	ENDIF
1257	ENDIF
1258	!
1259	!-- If filled grid point is already classified as building
1260	!-- everything is fine, else classify this grid point as
1261	!-- natural type grid point. This case, values for the
1262	!-- surface type are already set.
1263	IF ( .NOT. BTEST( topo_3d(k,j,i), 2 ) ) THEN
1264	topo_3d(k,j,i) = IBSET( topo_3d(k,j,i), 1 )
1265	ENDIF
1266	ENDIF
1267	ENDIF
1268	ENDDO
1269	ENDDO
1270	ENDDO
1271	!
1272	!-- Count the total number of holes, required for informative message.
1273	#if defined( __parallel )
1274	CALL MPI_ALLREDUCE( num_hole_l, num_hole, 1, MPI_INTEGER, MPI_SUM, &
1275	comm2d, ierr )
1276	#else
1277	num_hole = num_hole_l
1278	#endif
1279
1280	!
1281	!-- Create an informative message if any holes were filled.
1282	IF ( num_hole > 0 ) THEN
1283	WRITE( message_string, * ) num_hole, 'hole(s) resolved by only '// &
1284	'one grid point were filled at ', it, &
1285	'th iteration '
1286	CALL message( 'init_grid', 'PA0430', 0, 0, 0, 6, 0 )
1287	ENDIF
1288
1289
1290	ENDDO
1291
1292	DEALLOCATE( topo_tmp )
1293	!
1294	!-- Finally, exchange topo_3d array again and if necessary set Neumann boundary
1295	!-- condition in case of non-cyclic lateral boundaries.
1296	CALL exchange_horiz_int( topo_3d, nys, nyn, nxl, nxr, nzt, nbgp )
1297
1298	IF ( .NOT. bc_ns_cyc ) THEN
1299	IF ( nys == 0 ) topo_3d(:,-1,:) = topo_3d(:,0,:)
1300	IF ( nyn == ny ) topo_3d(:,ny+1,:) = topo_3d(:,ny,:)
1301	ENDIF
1302
1303	IF ( .NOT. bc_lr_cyc ) THEN
1304	IF ( nxl == 0 ) topo_3d(:,:,-1) = topo_3d(:,:,0)
1305	IF ( nxr == nx ) topo_3d(:,:,nx+1) = topo_3d(:,:,nx)
1306	ENDIF
1307
1308	END SUBROUTINE filter_topography
1309
1310	! Description:
1311	! -----------------------------------------------------------------------------!
1312	!> Pre-computation of grid-dependent and near-wall mixing length.
1313	!> @todo: move subroutine to turbulence module developed by M1 (Tobi).
1314	!------------------------------------------------------------------------------!
1315	SUBROUTINE init_mixing_length
1316
1317	USE arrays_3d, &
1318	ONLY: dzw, l_grid, l_wall, zu, zw
1319
1320	USE control_parameters, &
1321	ONLY: message_string, wall_adjustment_factor
1322
1323	USE grid_variables, &
1324	ONLY: dx, dy
1325
1326	USE indices, &
1327	ONLY: nbgp, nxl, nxlg, nxr, nxrg, nyn, nyng, nys, nysg, nzb, nzt, &
1328	wall_flags_0
1329
1330	USE kinds
1331
1332	IMPLICIT NONE
1333
1334	INTEGER(iwp) :: i !< index variable along x
1335	INTEGER(iwp) :: j !< index variable along y
1336	INTEGER(iwp) :: k !< index variable along z
1337
1338	ALLOCATE( l_grid(1:nzt) )
1339	ALLOCATE( l_wall(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
1340	!
1341	!-- Compute the grid-dependent mixing length.
1342	DO k = 1, nzt
1343	l_grid(k) = ( dx * dy * dzw(k) )**0.33333333333333_wp
1344	ENDDO
1345	!
1346	!-- Initialize near-wall mixing length l_wall only in the vertical direction
1347	!-- for the moment, multiplication with wall_adjustment_factor further below
1348	l_wall(nzb,:,:) = l_grid(1)
1349	DO k = nzb+1, nzt
1350	l_wall(k,:,:) = l_grid(k)
1351	ENDDO
1352	l_wall(nzt+1,:,:) = l_grid(nzt)
1353
1354	DO k = 1, nzt
1355	IF ( l_grid(k) > 1.5_wp * dx * wall_adjustment_factor .OR. &
1356	l_grid(k) > 1.5_wp * dy * wall_adjustment_factor ) THEN
1357	WRITE( message_string, * ) 'grid anisotropy exceeds ', &
1358	'threshold given by only local', &
1359	' &horizontal reduction of near_wall ', &
1360	'mixing length l_wall', &
1361	' &starting from height level k = ', k, '.'
1362	CALL message( 'init_grid', 'PA0202', 0, 1, 0, 6, 0 )
1363	EXIT
1364	ENDIF
1365	ENDDO
1366	!
1367	!-- In case of topography: limit near-wall mixing length l_wall further:
1368	!-- Go through all points of the subdomain one by one and look for the closest
1369	!-- surface.
1370	!-- Is this correct in the ocean case?
1371	DO i = nxl, nxr
1372	DO j = nys, nyn
1373	DO k = nzb+1, nzt
1374	!
1375	!-- Check if current gridpoint belongs to the atmosphere
1376	IF ( BTEST( wall_flags_0(k,j,i), 0 ) ) THEN
1377	!
1378	!-- Check for neighbouring grid-points.
1379	!-- Vertical distance, down
1380	IF ( .NOT. BTEST( wall_flags_0(k-1,j,i), 0 ) ) &
1381	l_wall(k,j,i) = MIN( l_grid(k), zu(k) - zw(k-1) )
1382	!
1383	!-- Vertical distance, up
1384	IF ( .NOT. BTEST( wall_flags_0(k+1,j,i), 0 ) ) &
1385	l_wall(k,j,i) = MIN( l_grid(k), zw(k) - zu(k) )
1386	!
1387	!-- y-distance
1388	IF ( .NOT. BTEST( wall_flags_0(k,j-1,i), 0 ) .OR. &
1389	.NOT. BTEST( wall_flags_0(k,j+1,i), 0 ) ) &
1390	l_wall(k,j,i) = MIN( l_wall(k,j,i), l_grid(k), 0.5_wp * dy )
1391	!
1392	!-- x-distance
1393	IF ( .NOT. BTEST( wall_flags_0(k,j,i-1), 0 ) .OR. &
1394	.NOT. BTEST( wall_flags_0(k,j,i+1), 0 ) ) &
1395	l_wall(k,j,i) = MIN( l_wall(k,j,i), l_grid(k), 0.5_wp * dx )
1396	!
1397	!-- yz-distance (vertical edges, down)
1398	IF ( .NOT. BTEST( wall_flags_0(k-1,j-1,i), 0 ) .OR. &
1399	.NOT. BTEST( wall_flags_0(k-1,j+1,i), 0 ) ) &
1400	l_wall(k,j,i) = MIN( l_wall(k,j,i), l_grid(k), &
1401	SQRT( 0.25_wp * dy**2 + &
1402	( zu(k) - zw(k-1) )**2 ) )
1403	!
1404	!-- yz-distance (vertical edges, up)
1405	IF ( .NOT. BTEST( wall_flags_0(k+1,j-1,i), 0 ) .OR. &
1406	.NOT. BTEST( wall_flags_0(k+1,j+1,i), 0 ) ) &
1407	l_wall(k,j,i) = MIN( l_wall(k,j,i), l_grid(k), &
1408	SQRT( 0.25_wp * dy**2 + &
1409	( zw(k) - zu(k) )**2 ) )
1410	!
1411	!-- xz-distance (vertical edges, down)
1412	IF ( .NOT. BTEST( wall_flags_0(k-1,j,i-1), 0 ) .OR. &
1413	.NOT. BTEST( wall_flags_0(k-1,j,i+1), 0 ) ) &
1414	l_wall(k,j,i) = MIN( l_wall(k,j,i), l_grid(k), &
1415	SQRT( 0.25_wp * dx**2 + &
1416	( zu(k) - zw(k-1) )**2 ) )
1417	!
1418	!-- xz-distance (vertical edges, up)
1419	IF ( .NOT. BTEST( wall_flags_0(k+1,j,i-1), 0 ) .OR. &
1420	.NOT. BTEST( wall_flags_0(k+1,j,i+1), 0 ) ) &
1421	l_wall(k,j,i) = MIN( l_wall(k,j,i), l_grid(k), &
1422	SQRT( 0.25_wp * dx**2 + &
1423	( zw(k) - zu(k) )**2 ) )
1424	!
1425	!-- xy-distance (horizontal edges)
1426	IF ( .NOT. BTEST( wall_flags_0(k,j-1,i-1), 0 ) .OR. &
1427	.NOT. BTEST( wall_flags_0(k,j+1,i-1), 0 ) .OR. &
1428	.NOT. BTEST( wall_flags_0(k,j-1,i+1), 0 ) .OR. &
1429	.NOT. BTEST( wall_flags_0(k,j+1,i+1), 0 ) ) &
1430	l_wall(k,j,i) = MIN( l_wall(k,j,i), l_grid(k), &
1431	SQRT( 0.25_wp * ( dx2 + dy2 ) ) )
1432	!
1433	!-- xyz distance (vertical and horizontal edges, down)
1434	IF ( .NOT. BTEST( wall_flags_0(k-1,j-1,i-1), 0 ) .OR. &
1435	.NOT. BTEST( wall_flags_0(k-1,j+1,i-1), 0 ) .OR. &
1436	.NOT. BTEST( wall_flags_0(k-1,j-1,i+1), 0 ) .OR. &
1437	.NOT. BTEST( wall_flags_0(k-1,j+1,i+1), 0 ) ) &
1438	l_wall(k,j,i) = MIN( l_wall(k,j,i), l_grid(k), &
1439	SQRT( 0.25_wp * ( dx2 + dy2 ) &
1440	+ ( zu(k) - zw(k-1) )**2 ) )
1441	!
1442	!-- xyz distance (vertical and horizontal edges, up)
1443	IF ( .NOT. BTEST( wall_flags_0(k+1,j-1,i-1), 0 ) .OR. &
1444	.NOT. BTEST( wall_flags_0(k+1,j+1,i-1), 0 ) .OR. &
1445	.NOT. BTEST( wall_flags_0(k+1,j-1,i+1), 0 ) .OR. &
1446	.NOT. BTEST( wall_flags_0(k+1,j+1,i+1), 0 ) ) &
1447	l_wall(k,j,i) = MIN( l_wall(k,j,i), l_grid(k), &
1448	SQRT( 0.25_wp * ( dx2 + dy2 ) &
1449	+ ( zw(k) - zu(k) )**2 ) )
1450
1451	ENDIF
1452	ENDDO
1453	ENDDO
1454	ENDDO
1455	!
1456	!-- Set lateral boundary conditions for l_wall
1457	CALL exchange_horiz( l_wall, nbgp )
1458
1459	END SUBROUTINE init_mixing_length
1460
1461	! Description:
1462	! -----------------------------------------------------------------------------!
1463	!> Reads topography information from file or sets generic topography. Moreover,
1464	!> all topography-relevant topography arrays are initialized, and grid flags
1465	!> are set.
1466	!------------------------------------------------------------------------------!
1467	SUBROUTINE init_topo( topo )
1468
1469	USE arrays_3d, &
1470	ONLY: zw
1471
1472	USE control_parameters, &
1473	ONLY: bc_lr_cyc, bc_ns_cyc, building_height, building_length_x, &
1474	building_length_y, building_wall_left, building_wall_south, &
1475	canyon_height, canyon_wall_left, canyon_wall_south, &
1476	canyon_width_x, canyon_width_y, dp_level_ind_b, dz, &
1477	message_string, ocean, topography, topography_grid_convention, &
1478	tunnel_height, tunnel_length, tunnel_width_x, tunnel_width_y, &
1479	tunnel_wall_depth
1480
1481	USE grid_variables, &
1482	ONLY: dx, dy
1483
1484	USE indices, &
1485	ONLY: nbgp, nx, nxl, nxlg, nxr, nxrg, ny, nyn, nyng, nys, nysg, nz, &
1486	nzb, nzt
1487
1488	USE kinds
1489
1490	USE pegrid
1491
1492	USE surface_mod, &
1493	ONLY: get_topography_top_index, get_topography_top_index_ji
1494
1495	IMPLICIT NONE
1496
1497	INTEGER(iwp) :: bh !< temporary vertical index of building height
1498	INTEGER(iwp) :: blx !< grid point number of building size along x
1499	INTEGER(iwp) :: bly !< grid point number of building size along y
1500	INTEGER(iwp) :: bxl !< index for left building wall
1501	INTEGER(iwp) :: bxr !< index for right building wall
1502	INTEGER(iwp) :: byn !< index for north building wall
1503	INTEGER(iwp) :: bys !< index for south building wall
1504	INTEGER(iwp) :: ch !< temporary vertical index for canyon height
1505	INTEGER(iwp) :: cwx !< grid point number of canyon size along x
1506	INTEGER(iwp) :: cwy !< grid point number of canyon size along y
1507	INTEGER(iwp) :: cxl !< index for left canyon wall
1508	INTEGER(iwp) :: cxr !< index for right canyon wall
1509	INTEGER(iwp) :: cyn !< index for north canyon wall
1510	INTEGER(iwp) :: cys !< index for south canyon wall
1511	INTEGER(iwp) :: i !< index variable along x
1512	INTEGER(iwp) :: it !< Number of iterations required to fill all problematic holes
1513	INTEGER(iwp) :: j !< index variable along y
1514	INTEGER(iwp) :: k !< index variable along z
1515	INTEGER(iwp) :: hv_in !< heavyside function to model inner tunnel surface
1516	INTEGER(iwp) :: hv_out !< heavyside function to model outer tunnel surface
1517	INTEGER(iwp) :: txe_out !< end position of outer tunnel wall in x
1518	INTEGER(iwp) :: txs_out !< start position of outer tunnel wall in x
1519	INTEGER(iwp) :: tye_out !< end position of outer tunnel wall in y
1520	INTEGER(iwp) :: tys_out !< start position of outer tunnel wall in y
1521	INTEGER(iwp) :: txe_in !< end position of inner tunnel wall in x
1522	INTEGER(iwp) :: txs_in !< start position of inner tunnel wall in x
1523	INTEGER(iwp) :: tye_in !< end position of inner tunnel wall in y
1524	INTEGER(iwp) :: tys_in !< start position of inner tunnel wall in y
1525	INTEGER(iwp) :: td !< tunnel wall depth
1526	INTEGER(iwp) :: th !< height of outer tunnel wall
1527
1528	INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: nzb_local !< index for topography top at cell-center
1529	INTEGER(iwp), DIMENSION(nzb:nzt+1,nysg:nyng,nxlg:nxrg) :: topo !< input array for 3D topography and dummy array for setting "outer"-flags
1530
1531
1532	!
1533	!-- Set outer and inner index arrays for non-flat topography.
1534	!-- Here consistency checks concerning domain size and periodicity are
1535	!-- necessary.
1536	!-- Within this SELECT CASE structure only nzb_local is initialized
1537	!-- individually depending on the chosen topography type, all other index
1538	!-- arrays are initialized further below.
1539	SELECT CASE ( TRIM( topography ) )
1540
1541	CASE ( 'flat' )
1542	!
1543	!-- Initialilize 3D topography array, used later for initializing flags
1544	topo(nzb+1:nzt+1,:,:) = IBSET( topo(nzb+1:nzt+1,:,:), 0 )
1545
1546	CASE ( 'single_building' )
1547	!
1548	!-- Single rectangular building, by default centered in the middle of the
1549	!-- total domain
1550	blx = NINT( building_length_x / dx )
1551	bly = NINT( building_length_y / dy )
1552	bh = MINLOC( ABS( zw - building_height ), 1 ) - 1
1553	IF ( ABS( zw(bh) - building_height ) == &
1554	ABS( zw(bh+1) - building_height ) ) bh = bh + 1
1555	IF ( building_wall_left == 9999999.9_wp ) THEN
1556	building_wall_left = ( nx + 1 - blx ) / 2 * dx
1557	ENDIF
1558	bxl = NINT( building_wall_left / dx )
1559	bxr = bxl + blx
1560
1561	IF ( building_wall_south == 9999999.9_wp ) THEN
1562	building_wall_south = ( ny + 1 - bly ) / 2 * dy
1563	ENDIF
1564	bys = NINT( building_wall_south / dy )
1565	byn = bys + bly
1566
1567	!
1568	!-- Building size has to meet some requirements
1569	IF ( ( bxl < 1 ) .OR. ( bxr > nx-1 ) .OR. ( bxr < bxl+3 ) .OR. &
1570	( bys < 1 ) .OR. ( byn > ny-1 ) .OR. ( byn < bys+3 ) ) THEN
1571	WRITE( message_string, * ) 'inconsistent building parameters:', &
1572	'& bxl=', bxl, 'bxr=', bxr, 'bys=', bys, &
1573	'byn=', byn, 'nx=', nx, 'ny=', ny
1574	CALL message( 'init_grid', 'PA0203', 1, 2, 0, 6, 0 )
1575	ENDIF
1576
1577	ALLOCATE( nzb_local(nysg:nyng,nxlg:nxrg) )
1578	!
1579	!-- Define the building.
1580	IF ( bxl <= nxr .AND. bxr >= nxl .AND. &
1581	bys <= nyn .AND. byn >= nys ) &
1582	nzb_local(MAX(nys,bys):MIN(nyn,byn),MAX(nxl,bxl):MIN(nxr,bxr)) = bh
1583	!
1584	!-- Set bit array on basis of nzb_local
1585	DO i = nxl, nxr
1586	DO j = nys, nyn
1587	topo(nzb_local(j,i)+1:nzt+1,j,i) = &
1588	IBSET( topo(nzb_local(j,i)+1:nzt+1,j,i), 0 )
1589	ENDDO
1590	ENDDO
1591
1592	DEALLOCATE( nzb_local )
1593
1594	CALL exchange_horiz_int( topo, nys, nyn, nxl, nxr, nzt, nbgp )
1595	!
1596	!-- Set boundary conditions also for flags. Can be interpreted as Neumann
1597	!-- boundary conditions for topography.
1598	IF ( .NOT. bc_ns_cyc ) THEN
1599	IF ( nys == 0 ) THEN
1600	DO i = 1, nbgp
1601	topo(:,nys-i,:) = topo(:,nys,:)
1602	ENDDO
1603	ENDIF
1604	IF ( nyn == ny ) THEN
1605	DO i = 1, nbgp
1606	topo(:,nyn+i,:) = topo(:,nyn,:)
1607	ENDDO
1608	ENDIF
1609	ENDIF
1610	IF ( .NOT. bc_lr_cyc ) THEN
1611	IF ( nxl == 0 ) THEN
1612	DO i = 1, nbgp
1613	topo(:,:,nxl-i) = topo(:,:,nxl)
1614	ENDDO
1615	ENDIF
1616	IF ( nxr == nx ) THEN
1617	DO i = 1, nbgp
1618	topo(:,:,nxr+i) = topo(:,:,nxr)
1619	ENDDO
1620	ENDIF
1621	ENDIF
1622
1623	CASE ( 'single_street_canyon' )
1624	!
1625	!-- Single quasi-2D street canyon of infinite length in x or y direction.
1626	!-- The canyon is centered in the other direction by default.
1627	IF ( canyon_width_x /= 9999999.9_wp ) THEN
1628	!
1629	!-- Street canyon in y direction
1630	cwx = NINT( canyon_width_x / dx )
1631	IF ( canyon_wall_left == 9999999.9_wp ) THEN
1632	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
1633	ENDIF
1634	cxl = NINT( canyon_wall_left / dx )
1635	cxr = cxl + cwx
1636	ELSEIF ( canyon_width_y /= 9999999.9_wp ) THEN
1637	!
1638	!-- Street canyon in x direction
1639	cwy = NINT( canyon_width_y / dy )
1640	IF ( canyon_wall_south == 9999999.9_wp ) THEN
1641	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
1642	ENDIF
1643	cys = NINT( canyon_wall_south / dy )
1644	cyn = cys + cwy
1645
1646	ELSE
1647
1648	message_string = 'no street canyon width given'
1649	CALL message( 'init_grid', 'PA0204', 1, 2, 0, 6, 0 )
1650
1651	ENDIF
1652
1653	ch = MINLOC( ABS( zw - canyon_height ), 1 ) - 1
1654	IF ( ABS( zw(ch) - canyon_height ) == &
1655	ABS( zw(ch+1) - canyon_height ) ) ch = ch + 1
1656	dp_level_ind_b = ch
1657	!
1658	!-- Street canyon size has to meet some requirements
1659	IF ( canyon_width_x /= 9999999.9_wp ) THEN
1660	IF ( ( cxl < 1 ) .OR. ( cxr > nx-1 ) .OR. ( cwx < 3 ) .OR. &
1661	( ch < 3 ) ) THEN
1662	WRITE( message_string, * ) 'inconsistent canyon parameters:', &
1663	'&cxl=', cxl, 'cxr=', cxr, &
1664	'cwx=', cwx, &
1665	'ch=', ch, 'nx=', nx, 'ny=', ny
1666	CALL message( 'init_grid', 'PA0205', 1, 2, 0, 6, 0 )
1667	ENDIF
1668	ELSEIF ( canyon_width_y /= 9999999.9_wp ) THEN
1669	IF ( ( cys < 1 ) .OR. ( cyn > ny-1 ) .OR. ( cwy < 3 ) .OR. &
1670	( ch < 3 ) ) THEN
1671	WRITE( message_string, * ) 'inconsistent canyon parameters:', &
1672	'&cys=', cys, 'cyn=', cyn, &
1673	'cwy=', cwy, &
1674	'ch=', ch, 'nx=', nx, 'ny=', ny
1675	CALL message( 'init_grid', 'PA0206', 1, 2, 0, 6, 0 )
1676	ENDIF
1677	ENDIF
1678	IF ( canyon_width_x /= 9999999.9_wp .AND. &
1679	canyon_width_y /= 9999999.9_wp ) THEN
1680	message_string = 'inconsistent canyon parameters:' // &
1681	'&street canyon can only be oriented' // &
1682	'&either in x- or in y-direction'
1683	CALL message( 'init_grid', 'PA0207', 1, 2, 0, 6, 0 )
1684	ENDIF
1685
1686	ALLOCATE( nzb_local(nysg:nyng,nxlg:nxrg) )
1687	nzb_local = ch
1688	IF ( canyon_width_x /= 9999999.9_wp ) THEN
1689	IF ( cxl <= nxr .AND. cxr >= nxl ) &
1690	nzb_local(:,MAX(nxl,cxl+1):MIN(nxr,cxr-1)) = 0
1691	ELSEIF ( canyon_width_y /= 9999999.9_wp ) THEN
1692	IF ( cys <= nyn .AND. cyn >= nys ) &
1693	nzb_local(MAX(nys,cys+1):MIN(nyn,cyn-1),:) = 0
1694	ENDIF
1695	!
1696	!-- Set bit array on basis of nzb_local
1697	DO i = nxl, nxr
1698	DO j = nys, nyn
1699	topo(nzb_local(j,i)+1:nzt+1,j,i) = &
1700	IBSET( topo(nzb_local(j,i)+1:nzt+1,j,i), 0 )
1701	ENDDO
1702	ENDDO
1703	DEALLOCATE( nzb_local )
1704
1705	CALL exchange_horiz_int( topo, nys, nyn, nxl, nxr, nzt, nbgp )
1706	!
1707	!-- Set boundary conditions also for flags. Can be interpreted as Neumann
1708	!-- boundary conditions for topography.
1709	IF ( .NOT. bc_ns_cyc ) THEN
1710	IF ( nys == 0 ) THEN
1711	DO i = 1, nbgp
1712	topo(:,nys-i,:) = topo(:,nys,:)
1713	ENDDO
1714	ENDIF
1715	IF ( nyn == ny ) THEN
1716	DO i = 1, nbgp
1717	topo(:,nyn+i,:) = topo(:,nyn,:)
1718	ENDDO
1719	ENDIF
1720	ENDIF
1721	IF ( .NOT. bc_lr_cyc ) THEN
1722	IF ( nxl == 0 ) THEN
1723	DO i = 1, nbgp
1724	topo(:,:,nxl-i) = topo(:,:,nxl)
1725	ENDDO
1726	ENDIF
1727	IF ( nxr == nx ) THEN
1728	DO i = 1, nbgp
1729	topo(:,:,nxr+i) = topo(:,:,nxr)
1730	ENDDO
1731	ENDIF
1732	ENDIF
1733
1734	CASE ( 'tunnel' )
1735
1736	!
1737	!-- Tunnel height
1738	IF ( tunnel_height == 9999999.9_wp ) THEN
1739	th = zw( INT( 0.2 * nz) )
1740	ELSE
1741	th = tunnel_height
1742	ENDIF
1743	!
1744	!-- Tunnel-wall depth
1745	IF ( tunnel_wall_depth == 9999999.9_wp ) THEN
1746	td = MAX ( dx, dy, dz )
1747	ELSE
1748	td = tunnel_wall_depth
1749	ENDIF
1750	!
1751	!-- Check for tunnel width
1752	IF ( tunnel_width_x == 9999999.9_wp .AND. &
1753	tunnel_width_y == 9999999.9_wp ) THEN
1754	message_string = 'No tunnel width is given. '
1755	CALL message( 'init_grid', 'PA0280', 1, 2, 0, 6, 0 )
1756	ENDIF
1757	IF ( tunnel_width_x /= 9999999.9_wp .AND. &
1758	tunnel_width_y /= 9999999.9_wp ) THEN
1759	message_string = 'Inconsistent tunnel parameters:' // &
1760	'tunnel can only be oriented' // &
1761	'either in x- or in y-direction.'
1762	CALL message( 'init_grid', 'PA0281', 1, 2, 0, 6, 0 )
1763	ENDIF
1764	!
1765	!-- Tunnel axis along y
1766	IF ( tunnel_width_x /= 9999999.9_wp ) THEN
1767	IF ( tunnel_width_x > ( nx + 1 ) * dx ) THEN
1768	message_string = 'Tunnel width too large'
1769	CALL message( 'init_grid', 'PA0282', 1, 2, 0, 6, 0 )
1770	ENDIF
1771
1772	txs_out = INT( ( nx + 1 ) * 0.5_wp * dx - tunnel_width_x * 0.5_wp )
1773	txe_out = INT( ( nx + 1 ) * 0.5_wp * dx + tunnel_width_x * 0.5_wp )
1774	txs_in = INT( ( nx + 1 ) * 0.5_wp * dx - &
1775	( tunnel_width_x * 0.5_wp - td ) )
1776	txe_in = INT( ( nx + 1 ) * 0.5_wp * dx + &
1777	( tunnel_width_x * 0.5_wp - td ) )
1778
1779	tys_out = INT( ( ny + 1 ) * 0.5_wp * dy - tunnel_length * 0.5_wp )
1780	tye_out = INT( ( ny + 1 ) * 0.5_wp * dy + tunnel_length * 0.5_wp )
1781	tys_in = tys_out
1782	tye_in = tye_out
1783	ENDIF
1784	IF ( tunnel_width_x /= 9999999.9_wp .AND. &
1785	tunnel_width_x - 2.0_wp * td <= 2.0_wp * dx ) &
1786	THEN
1787	message_string = 'Tunnel width too small'
1788	CALL message( 'init_grid', 'PA0175', 1, 2, 0, 6, 0 )
1789	ENDIF
1790	IF ( tunnel_width_y /= 9999999.9_wp .AND. &
1791	tunnel_width_y - 2.0_wp * td <= 2.0_wp * dy ) &
1792	THEN
1793	message_string = 'Tunnel width too small'
1794	CALL message( 'init_grid', 'PA0455', 1, 2, 0, 6, 0 )
1795	ENDIF
1796	!
1797	!-- Tunnel axis along x
1798	IF ( tunnel_width_y /= 9999999.9_wp ) THEN
1799	IF ( tunnel_width_y > ( ny + 1 ) * dy ) THEN
1800	message_string = 'Tunnel width too large'
1801	CALL message( 'init_grid', 'PA0456', 1, 2, 0, 6, 0 )
1802	ENDIF
1803
1804	txs_out = INT( ( nx + 1 ) * 0.5_wp * dx - tunnel_length * 0.5_wp )
1805	txe_out = INT( ( nx + 1 ) * 0.5_wp * dx + tunnel_length * 0.5_wp )
1806	txs_in = txs_out
1807	txe_in = txe_out
1808
1809	tys_out = INT( ( ny + 1 ) * 0.5_wp * dy - tunnel_width_y * 0.5_wp )
1810	tye_out = INT( ( ny + 1 ) * 0.5_wp * dy + tunnel_width_y * 0.5_wp )
1811	tys_in = INT( ( ny + 1 ) * 0.5_wp * dy - &
1812	( tunnel_width_y * 0.5_wp - td ) )
1813	tye_in = INT( ( ny + 1 ) * 0.5_wp * dy + &
1814	( tunnel_width_y * 0.5_wp - td ) )
1815	ENDIF
1816
1817	topo = 0
1818	DO i = nxl, nxr
1819	DO j = nys, nyn
1820	!
1821	!-- Use heaviside function to model outer tunnel surface
1822	hv_out = th * 0.5_wp * &
1823	( ( SIGN( 1.0_wp, i * dx - txs_out ) + 1.0_wp ) &
1824	- ( SIGN( 1.0_wp, i * dx - txe_out ) + 1.0_wp ) )
1825
1826	hv_out = hv_out * 0.5_wp * &
1827	( ( SIGN( 1.0_wp, j * dy - tys_out ) + 1.0_wp ) &
1828	- ( SIGN( 1.0_wp, j * dy - tye_out ) + 1.0_wp ) )
1829	!
1830	!-- Use heaviside function to model inner tunnel surface
1831	hv_in = ( th - td ) * 0.5_wp * &
1832	( ( SIGN( 1.0_wp, i * dx - txs_in ) + 1.0_wp ) &
1833	- ( SIGN( 1.0_wp, i * dx - txe_in ) + 1.0_wp ) )
1834
1835	hv_in = hv_in * 0.5_wp * &
1836	( ( SIGN( 1.0_wp, j * dy - tys_in ) + 1.0_wp ) &
1837	- ( SIGN( 1.0_wp, j * dy - tye_in ) + 1.0_wp ) )
1838	!
1839	!-- Set flags at x-y-positions without any tunnel surface
1840	IF ( hv_out - hv_in == 0.0_wp ) THEN
1841	topo(nzb+1:nzt+1,j,i) = IBSET( topo(nzb+1:nzt+1,j,i), 0 )
1842	!
1843	!-- Set flags at x-y-positions with tunnel surfaces
1844	ELSE
1845	DO k = nzb + 1, nzt + 1
1846	!
1847	!-- Inner tunnel
1848	IF ( hv_out - hv_in == th ) THEN
1849	IF ( zw(k) <= hv_out ) THEN
1850	topo(k,j,i) = IBCLR( topo(k,j,i), 0 )
1851	ELSE
1852	topo(k,j,i) = IBSET( topo(k,j,i), 0 )
1853	ENDIF
1854	ENDIF
1855	!
1856	!-- Lateral tunnel walls
1857	IF ( hv_out - hv_in == td ) THEN
1858	IF ( zw(k) <= hv_in ) THEN
1859	topo(k,j,i) = IBSET( topo(k,j,i), 0 )
1860	ELSEIF ( zw(k) > hv_in .AND. zw(k) <= hv_out ) THEN
1861	topo(k,j,i) = IBCLR( topo(k,j,i), 0 )
1862	ELSEIF ( zw(k) > hv_out ) THEN
1863	topo(k,j,i) = IBSET( topo(k,j,i), 0 )
1864	ENDIF
1865	ENDIF
1866	ENDDO
1867	ENDIF
1868	ENDDO
1869	ENDDO
1870
1871	CALL exchange_horiz_int( topo, nys, nyn, nxl, nxr, nzt, nbgp )
1872	!
1873	!-- Set boundary conditions also for flags. Can be interpreted as Neumann
1874	!-- boundary conditions for topography.
1875	IF ( .NOT. bc_ns_cyc ) THEN
1876	IF ( nys == 0 ) THEN
1877	DO i = 1, nbgp
1878	topo(:,nys-i,:) = topo(:,nys,:)
1879	ENDDO
1880	ENDIF
1881	IF ( nyn == ny ) THEN
1882	DO i = 1, nbgp
1883	topo(:,nyn+i,:) = topo(:,nyn,:)
1884	ENDDO
1885	ENDIF
1886	ENDIF
1887	IF ( .NOT. bc_lr_cyc ) THEN
1888	IF ( nxl == 0 ) THEN
1889	DO i = 1, nbgp
1890	topo(:,:,nxl-i) = topo(:,:,nxl)
1891	ENDDO
1892	ENDIF
1893	IF ( nxr == nx ) THEN
1894	DO i = 1, nbgp
1895	topo(:,:,nxr+i) = topo(:,:,nxr)
1896	ENDDO
1897	ENDIF
1898	ENDIF
1899
1900	CASE ( 'read_from_file' )
1901	!
1902	!-- Note, topography information have been already read.
1903	!-- If required, further process topography, i.e. reference buildings on
1904	!-- top of orography and set temporary 3D topography array, which is
1905	!-- used later to set grid flags. Calling of this rouinte is also
1906	!-- required in case of ASCII input, even though no distinction between
1907	!-- terrain- and building height is made in this case.
1908	CALL process_topography( topo )
1909	!
1910	!-- Filter holes resolved by only one grid-point
1911	CALL filter_topography( topo )
1912	!
1913	!-- Exchange ghost-points, as well as add cyclic or Neumann boundary
1914	!-- conditions.
1915	CALL exchange_horiz_int( topo, nys, nyn, nxl, nxr, nzt, nbgp )
1916	!
1917	!-- Set lateral boundary conditions for topography on all ghost layers
1918	IF ( .NOT. bc_ns_cyc ) THEN
1919	IF ( nys == 0 ) THEN
1920	DO i = 1, nbgp
1921	topo(:,nys-i,:) = topo(:,nys,:)
1922	ENDDO
1923	ENDIF
1924	IF ( nyn == ny ) THEN
1925	DO i = 1, nbgp
1926	topo(:,nyn+i,:) = topo(:,nyn,:)
1927	ENDDO
1928	ENDIF
1929	ENDIF
1930
1931	IF ( .NOT. bc_lr_cyc ) THEN
1932	IF ( nxl == 0 ) THEN
1933	DO i = 1, nbgp
1934	topo(:,:,nxl-i) = topo(:,:,nxl)
1935	ENDDO
1936	ENDIF
1937	IF ( nxr == nx ) THEN
1938	DO i = 1, nbgp
1939	topo(:,:,nxr+i) = topo(:,:,nxr)
1940	ENDDO
1941	ENDIF
1942	ENDIF
1943
1944
1945	CASE DEFAULT
1946	!
1947	!-- The DEFAULT case is reached either if the parameter topography
1948	!-- contains a wrong character string or if the user has defined a special
1949	!-- case in the user interface. There, the subroutine user_init_grid
1950	!-- checks which of these two conditions applies.
1951	CALL user_init_grid( topo )
1952	CALL filter_topography( topo )
1953
1954	END SELECT
1955	!
1956	!-- Consistency checks and index array initialization are only required for
1957	!-- non-flat topography.
1958	IF ( TRIM( topography ) /= 'flat' ) THEN
1959	!
1960	!-- In case of non-flat topography, check whether the convention how to
1961	!-- define the topography grid has been set correctly, or whether the default
1962	!-- is applicable. If this is not possible, abort.
1963	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
1964	IF ( TRIM( topography ) /= 'single_building' .AND. &
1965	TRIM( topography ) /= 'single_street_canyon' .AND. &
1966	TRIM( topography ) /= 'tunnel' .AND. &
1967	TRIM( topography ) /= 'read_from_file') THEN
1968	!-- The default value is not applicable here, because it is only valid
1969	!-- for the two standard cases 'single_building' and 'read_from_file'
1970	!-- defined in init_grid.
1971	WRITE( message_string, * ) &
1972	'The value for "topography_grid_convention" ', &
1973	'is not set. Its default value is & only valid for ', &
1974	'"topography" = ''single_building'', ', &
1975	'''single_street_canyon'' & or ''read_from_file''.', &
1976	' & Choose ''cell_edge'' or ''cell_center''.'
1977	CALL message( 'init_grid', 'PA0239', 1, 2, 0, 6, 0 )
1978	ELSE
1979	!-- The default value is applicable here.
1980	!-- Set convention according to topography.
1981	IF ( TRIM( topography ) == 'single_building' .OR. &
1982	TRIM( topography ) == 'single_street_canyon' ) THEN
1983	topography_grid_convention = 'cell_edge'
1984	ELSEIF ( TRIM( topography ) == 'read_from_file' .OR. &
1985	TRIM( topography ) == 'tunnel') THEN
1986	topography_grid_convention = 'cell_center'
1987	ENDIF
1988	ENDIF
1989	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
1990	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
1991	WRITE( message_string, * ) &
1992	'The value for "topography_grid_convention" is ', &
1993	'not recognized. & Choose ''cell_edge'' or ''cell_center''.'
1994	CALL message( 'init_grid', 'PA0240', 1, 2, 0, 6, 0 )
1995	ENDIF
1996
1997
1998	IF ( topography_grid_convention == 'cell_edge' ) THEN
1999	!
2000	!-- The array nzb_local as defined using the 'cell_edge' convention
2001	!-- describes the actual total size of topography which is defined at the
2002	!-- cell edges where u=0 on the topography walls in x-direction and v=0
2003	!-- on the topography walls in y-direction. However, PALM uses individual
2004	!-- arrays nzb_u\|v\|w\|s_inner\|outer that are based on nzb_s_inner.
2005	!-- Therefore, the extent of topography in nzb_local is now reduced by
2006	!-- 1dx at the E topography walls and by 1dy at the N topography walls
2007	!-- to form the basis for nzb_s_inner.
2008	!-- Note, the reverse memory access (i-j instead of j-i) is absolutely
2009	!-- required at this point.
2010	DO j = nys+1, nyn+1
2011	DO i = nxl-1, nxr
2012	DO k = nzb, nzt+1
2013	IF ( BTEST( topo(k,j,i), 0 ) .OR. &
2014	BTEST( topo(k,j,i+1), 0 ) ) &
2015	topo(k,j,i) = IBSET( topo(k,j,i), 0 )
2016	ENDDO
2017	ENDDO
2018	ENDDO
2019	CALL exchange_horiz_int( topo, nys, nyn, nxl, nxr, nzt, nbgp )
2020
2021	DO i = nxl, nxr+1
2022	DO j = nys-1, nyn
2023	DO k = nzb, nzt+1
2024	IF ( BTEST( topo(k,j,i), 0 ) .OR. &
2025	BTEST( topo(k,j+1,i), 0 ) ) &
2026	topo(k,j,i) = IBSET( topo(k,j,i), 0 )
2027	ENDDO
2028	ENDDO
2029	ENDDO
2030	CALL exchange_horiz_int( topo, nys, nyn, nxl, nxr, nzt, nbgp )
2031
2032	ENDIF
2033	ENDIF
2034
2035
2036	END SUBROUTINE init_topo
2037
2038	SUBROUTINE set_topo_flags(topo)
2039
2040	USE control_parameters, &
2041	ONLY: bc_lr_cyc, bc_ns_cyc, constant_flux_layer, land_surface, &
2042	use_surface_fluxes, use_top_fluxes, urban_surface
2043
2044	USE indices, &
2045	ONLY: nbgp, nx, nxl, nxlg, nxr, nxrg, ny, nyn, nyng, nys, nysg, nz, &
2046	nzb, nzt, wall_flags_0
2047
2048	USE kinds
2049
2050	IMPLICIT NONE
2051
2052	INTEGER(iwp) :: i !< index variable along x
2053	INTEGER(iwp) :: j !< index variable along y
2054	INTEGER(iwp) :: k !< index variable along z
2055
2056	INTEGER(iwp), DIMENSION(nzb:nzt+1,nysg:nyng,nxlg:nxrg) :: topo !< input array for 3D topography and dummy array for setting "outer"-flags
2057
2058	ALLOCATE( wall_flags_0(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
2059	wall_flags_0 = 0
2060	!
2061	!-- Set-up topography flags. First, set flags only for s, u, v and w-grid.
2062	!-- Further special flags will be set in following loops.
2063	DO i = nxl, nxr
2064	DO j = nys, nyn
2065	DO k = nzb, nzt+1
2066	!
2067	!-- scalar grid
2068	IF ( BTEST( topo(k,j,i), 0 ) ) &
2069	wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 0 )
2070	!
2071	!-- u grid
2072	IF ( BTEST( topo(k,j,i), 0 ) .AND. &
2073	BTEST( topo(k,j,i-1), 0 ) ) &
2074	wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 1 )
2075	!
2076	!-- v grid
2077	IF ( BTEST( topo(k,j,i), 0 ) .AND. &
2078	BTEST( topo(k,j-1,i), 0 ) ) &
2079	wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 2 )
2080
2081	ENDDO
2082
2083	DO k = nzb, nzt
2084	!
2085	!-- w grid
2086	IF ( BTEST( topo(k,j,i), 0 ) .AND. &
2087	BTEST( topo(k+1,j,i), 0 ) ) &
2088	wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 3 )
2089	ENDDO
2090	wall_flags_0(nzt+1,j,i) = IBSET( wall_flags_0(nzt+1,j,i), 3 )
2091
2092	ENDDO
2093	ENDDO
2094
2095	CALL exchange_horiz_int ( wall_flags_0, nys, nyn, nxl, nxr, nzt, nbgp )
2096	!
2097	!-- Set outer array for scalars to mask near-surface grid points in
2098	!-- production_e
2099	DO i = nxl, nxr
2100	DO j = nys, nyn
2101	DO k = nzb, nzt+1
2102	IF ( BTEST( wall_flags_0(k,j-1,i), 0 ) .AND. &
2103	BTEST( wall_flags_0(k,j+1,i), 0 ) .AND. &
2104	BTEST( wall_flags_0(k,j,i-1), 0 ) .AND. &
2105	BTEST( wall_flags_0(k,j-1,i-1), 0 ) .AND. &
2106	BTEST( wall_flags_0(k,j+1,i-1), 0 ) .AND. &
2107	BTEST( wall_flags_0(k,j-1,i+1), 0 ) .AND. &
2108	BTEST( wall_flags_0(k,j+1,i+1), 0 ) ) &
2109	wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 24 )
2110	ENDDO
2111	ENDDO
2112	ENDDO
2113	!
2114	!-- Set further special flags
2115	DO i = nxl, nxr
2116	DO j = nys, nyn
2117	DO k = nzb, nzt+1
2118	!
2119	!-- scalar grid, former nzb_diff_s_inner.
2120	!-- Note, use this flag also to mask topography in diffusion_u and
2121	!-- diffusion_v along the vertical direction. In case of
2122	!-- use_surface_fluxes, fluxes are calculated via MOST, else, simple
2123	!-- gradient approach is applied. Please note, in case of u- and v-
2124	!-- diffuison, a small error is made at edges (on the east side for u,
2125	!-- at the north side for v), since topography on scalar grid point
2126	!-- is used instead of topography on u/v-grid. As number of topography grid
2127	!-- points on uv-grid is different than s-grid, different number of
2128	!-- surface elements would be required. In order to avoid this,
2129	!-- treat edges (u(k,j,i+1)) simply by a gradient approach, i.e. these
2130	!-- points are not masked within diffusion_u. Tests had shown that the
2131	!-- effect on the flow is negligible.
2132	IF ( constant_flux_layer .OR. use_surface_fluxes ) THEN
2133	IF ( BTEST( wall_flags_0(k,j,i), 0 ) ) &
2134	wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 8 )
2135	ELSE
2136	wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 8 )
2137	ENDIF
2138
2139	ENDDO
2140	!
2141	!-- Special flag to control vertical diffusion at model top - former
2142	!-- nzt_diff
2143	wall_flags_0(:,j,i) = IBSET( wall_flags_0(:,j,i), 9 )
2144	IF ( use_top_fluxes ) &
2145	wall_flags_0(nzt+1,j,i) = IBCLR( wall_flags_0(nzt+1,j,i), 9 )
2146
2147
2148	DO k = nzb+1, nzt
2149	!
2150	!-- Special flag on u grid, former nzb_u_inner + 1, required
2151	!-- for disturb_field and initialization. Do not disturb directly at
2152	!-- topography, as well as initialize u with zero one grid point outside
2153	!-- of topography.
2154	IF ( BTEST( wall_flags_0(k-1,j,i), 1 ) .AND. &
2155	BTEST( wall_flags_0(k,j,i), 1 ) .AND. &
2156	BTEST( wall_flags_0(k+1,j,i), 1 ) ) &
2157	wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 20 )
2158	!
2159	!-- Special flag on v grid, former nzb_v_inner + 1, required
2160	!-- for disturb_field and initialization. Do not disturb directly at
2161	!-- topography, as well as initialize v with zero one grid point outside
2162	!-- of topography.
2163	IF ( BTEST( wall_flags_0(k-1,j,i), 2 ) .AND. &
2164	BTEST( wall_flags_0(k,j,i), 2 ) .AND. &
2165	BTEST( wall_flags_0(k+1,j,i), 2 ) ) &
2166	wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 21 )
2167	!
2168	!-- Special flag on scalar grid, former nzb_s_inner+1. Used for
2169	!-- lpm_sgs_tke
2170	IF ( BTEST( wall_flags_0(k,j,i), 0 ) .AND. &
2171	BTEST( wall_flags_0(k-1,j,i), 0 ) .AND. &
2172	BTEST( wall_flags_0(k+1,j,i), 0 ) ) &
2173	wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 25 )
2174	!
2175	!-- Special flag on scalar grid, nzb_diff_s_outer - 1, required in
2176	!-- in production_e
2177	IF ( constant_flux_layer .OR. use_surface_fluxes ) THEN
2178	IF ( BTEST( wall_flags_0(k,j,i), 24 ) .AND. &
2179	BTEST( wall_flags_0(k-1,j,i), 24 ) .AND. &
2180	BTEST( wall_flags_0(k+1,j,i), 0 ) ) &
2181	wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 29 )
2182	ELSE
2183	IF ( BTEST( wall_flags_0(k,j,i), 0 ) ) &
2184	wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 29 )
2185	ENDIF
2186	!
2187	!-- Special flag on scalar grid, nzb_diff_s_outer - 1, required in
2188	!-- in production_e
2189	IF ( constant_flux_layer .OR. use_surface_fluxes ) THEN
2190	IF ( BTEST( wall_flags_0(k,j,i), 0 ) .AND. &
2191	BTEST( wall_flags_0(k-1,j,i), 0 ) .AND. &
2192	BTEST( wall_flags_0(k+1,j,i), 0 ) ) &
2193	wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 30 )
2194	ELSE
2195	IF ( BTEST( wall_flags_0(k,j,i), 0 ) ) &
2196	wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 30 )
2197	ENDIF
2198	ENDDO
2199	!
2200	!-- Flags indicating downward facing walls
2201	DO k = nzb+1, nzt
2202	!
2203	!-- Scalar grid
2204	IF ( BTEST( wall_flags_0(k-1,j,i), 0 ) .AND. &
2205	.NOT. BTEST( wall_flags_0(k,j,i), 0 ) ) &
2206	wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 13 )
2207	!
2208	!-- Downward facing wall on u grid
2209	IF ( BTEST( wall_flags_0(k-1,j,i), 1 ) .AND. &
2210	.NOT. BTEST( wall_flags_0(k,j,i), 1 ) ) &
2211	wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 15 )
2212	!
2213	!-- Downward facing wall on v grid
2214	IF ( BTEST( wall_flags_0(k-1,j,i), 2 ) .AND. &
2215	.NOT. BTEST( wall_flags_0(k,j,i), 2 ) ) &
2216	wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 17 )
2217	!
2218	!-- Downward facing wall on w grid
2219	IF ( BTEST( wall_flags_0(k-1,j,i), 3 ) .AND. &
2220	.NOT. BTEST( wall_flags_0(k,j,i), 3 ) ) &
2221	wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 19 )
2222	ENDDO
2223	!
2224	!-- Flags indicating upward facing walls
2225	DO k = nzb, nzt
2226	!
2227	!-- Upward facing wall on scalar grid
2228	IF ( .NOT. BTEST( wall_flags_0(k,j,i), 0 ) .AND. &
2229	BTEST( wall_flags_0(k+1,j,i), 0 ) ) &
2230	wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 12 )
2231	!
2232	!-- Upward facing wall on u grid
2233	IF ( .NOT. BTEST( wall_flags_0(k,j,i), 1 ) .AND. &
2234	BTEST( wall_flags_0(k+1,j,i), 1 ) ) &
2235	wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 14 )
2236
2237	!
2238	!-- Upward facing wall on v grid
2239	IF ( .NOT. BTEST( wall_flags_0(k,j,i), 2 ) .AND. &
2240	BTEST( wall_flags_0(k+1,j,i), 2 ) ) &
2241	wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 16 )
2242
2243	!
2244	!-- Upward facing wall on w grid
2245	IF ( .NOT. BTEST( wall_flags_0(k,j,i), 3 ) .AND. &
2246	BTEST( wall_flags_0(k+1,j,i), 3 ) ) &
2247	wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 18 )
2248	!
2249	!-- Special flag on scalar grid, former nzb_s_inner
2250	IF ( BTEST( wall_flags_0(k,j,i), 0 ) .OR. &
2251	BTEST( wall_flags_0(k,j,i), 12 ) .OR. &
2252	BTEST( wall_flags_0(k,j,i), 13 ) ) &
2253	wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 22 )
2254	!
2255	!-- Special flag on scalar grid, nzb_diff_s_inner - 1, required for
2256	!-- flow_statistics
2257	IF ( constant_flux_layer .OR. use_surface_fluxes ) THEN
2258	IF ( BTEST( wall_flags_0(k,j,i), 0 ) .AND. &
2259	BTEST( wall_flags_0(k+1,j,i), 0 ) ) &
2260	wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 23 )
2261	ELSE
2262	IF ( BTEST( wall_flags_0(k,j,i), 22 ) ) &
2263	wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 23 )
2264	ENDIF
2265
2266
2267	ENDDO
2268	wall_flags_0(nzt+1,j,i) = IBSET( wall_flags_0(nzt+1,j,i), 22 )
2269	wall_flags_0(nzt+1,j,i) = IBSET( wall_flags_0(nzt+1,j,i), 23 )
2270	ENDDO
2271	ENDDO
2272	!
2273	!-- Finally, set identification flags indicating natural terrain or buildings.
2274	!-- Natural terrain grid points.
2275	IF ( land_surface ) THEN
2276	DO i = nxl, nxr
2277	DO j = nys, nyn
2278	DO k = nzb, nzt+1
2279	!
2280	!-- Natural terrain grid point
2281	IF ( BTEST( topo(k,j,i), 1 ) ) &
2282	wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 5 )
2283	ENDDO
2284	ENDDO
2285	ENDDO
2286	ENDIF
2287	!
2288	!-- Building grid points.
2289	IF ( urban_surface ) THEN
2290	DO i = nxl, nxr
2291	DO j = nys, nyn
2292	DO k = nzb, nzt+1
2293	IF ( BTEST( topo(k,j,i), 2 ) ) &
2294	wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 6 )
2295	ENDDO
2296	ENDDO
2297	ENDDO
2298	ENDIF
2299
2300	!
2301	!-- Exchange ghost points for wall flags
2302	CALL exchange_horiz_int( wall_flags_0, nys, nyn, nxl, nxr, nzt, nbgp )
2303	!
2304	!-- Set boundary conditions also for flags. Can be interpreted as Neumann
2305	!-- boundary conditions for topography.
2306	IF ( .NOT. bc_ns_cyc ) THEN
2307	IF ( nys == 0 ) THEN
2308	DO i = 1, nbgp
2309	wall_flags_0(:,nys-i,:) = wall_flags_0(:,nys,:)
2310	ENDDO
2311	ENDIF
2312	IF ( nyn == ny ) THEN
2313	DO i = 1, nbgp
2314	wall_flags_0(:,nyn+i,:) = wall_flags_0(:,nyn,:)
2315	ENDDO
2316	ENDIF
2317	ENDIF
2318	IF ( .NOT. bc_lr_cyc ) THEN
2319	IF ( nxl == 0 ) THEN
2320	DO i = 1, nbgp
2321	wall_flags_0(:,:,nxl-i) = wall_flags_0(:,:,nxl)
2322	ENDDO
2323	ENDIF
2324	IF ( nxr == nx ) THEN
2325	DO i = 1, nbgp
2326	wall_flags_0(:,:,nxr+i) = wall_flags_0(:,:,nxr)
2327	ENDDO
2328	ENDIF
2329	ENDIF
2330
2331
2332	END SUBROUTINE set_topo_flags
2333
2334
2335

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |