Home

Context Navigation

source: palm/trunk/SOURCE/init_grid.f90 @ 4788

Last change on this file since 4788 was 4722, checked in by suehring, 4 years ago
Bugfix in building mapping when static driver is available but no actual building is present within the model domain
Property svn:keywords set to `Id`
File size: 116.1 KB

Rev	Line
[1682]	1	!> @file init_grid.f90
[4648]	2	!--------------------------------------------------------------------------------------------------!
[2696]	3	! This file is part of the PALM model system.
[1036]	4	!
[4648]	5	! PALM is free software: you can redistribute it and/or modify it under the terms of the GNU General
	6	! Public License as published by the Free Software Foundation, either version 3 of the License, or
	7	! (at your option) any later version.
[1036]	8	!
[4648]	9	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the
	10	! implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
	11	! Public License for more details.
[1036]	12	!
[4648]	13	! You should have received a copy of the GNU General Public License along with PALM. If not, see
	14	! <http://www.gnu.org/licenses/>.
[1036]	15	!
[4360]	16	! Copyright 1997-2020 Leibniz Universitaet Hannover
[4648]	17	!--------------------------------------------------------------------------------------------------!
[1036]	18	!
[254]	19	! Current revisions:
[1]	20	! -----------------
[4601]	21	!
	22	!
[2233]	23	! Former revisions:
	24	! -----------------
	25	! $Id: init_grid.f90 4722 2020-10-05 11:03:14Z oliver.maas $
[4722]	26	! Bugfix in building mapping when static driver is available but no actual building is present
	27	! within the model domain
	28	!
	29	! 4691 2020-09-22 14:38:38Z suehring
[4691]	30	! Reference model topography to the lowest grid point also in ASCII input case
	31	!
	32	! 4653 2020-08-27 08:54:43Z pavelkrc
[4648]	33	! file re-formatted to follow the PALM coding standard
	34	!
	35	! 4630 2020-07-30 14:54:34Z suehring
[4630]	36	! In case of ASCII topography input flag grid points as terrain and building.
	37	!
	38	! 4601 2020-07-14 12:06:09Z suehring
[4601]	39	! Minor formatting adjustments
[4648]	40	!
[4601]	41	! 4564 2020-06-12 14:03:36Z raasch
[4564]	42	! Vertical nesting method of Huq et al. (2019) removed
[4648]	43	!
[4564]	44	! 4543 2020-05-20 14:12:22Z gronemeier
[4543]	45	! Remove non-required check for canyon height
[4648]	46	!
[4543]	47	! 4507 2020-04-22 18:21:45Z gronemeier
[4507]	48	! update origin_z with shifting height of orography (oro_min)
[4648]	49	!
[4507]	50	! 4457 2020-03-11 14:20:43Z raasch
[4457]	51	! use statement for exchange horiz added,
	52	! bugfix for call of exchange horiz 2d
[4648]	53	!
[4457]	54	! 4444 2020-03-05 15:59:50Z raasch
[4444]	55	! bugfix: cpp-directives for serial mode added
[4648]	56	!
[4444]	57	! 4414 2020-02-19 20:16:04Z suehring
[4414]	58	! - Remove deprecated topography arrays nzb_s_inner, nzb_u_inner, etc.
[4648]	59	! - Move initialization of boundary conditions and multigrid into an extra module interface.
	60	!
[4414]	61	! 4386 2020-01-27 15:07:30Z Giersch
[4648]	62	! Allocation statements, comments, naming of variables revised and _wp added to real type values
	63	!
[4386]	64	! 4360 2020-01-07 11:25:50Z suehring
[4356]	65	! Revise error messages for generic tunnel setup.
[4648]	66	!
[4356]	67	! 4346 2019-12-18 11:55:56Z motisi
[4648]	68	! Introduction of wall_flags_total_0, which currently sets bits based on static topography
	69	! information used in wall_flags_static_0
	70	!
[4346]	71	! 4340 2019-12-16 08:17:03Z Giersch
[4340]	72	! Topography closed channel flow with symmetric boundaries implemented
[4648]	73	!
[4340]	74	! 4329 2019-12-10 15:46:36Z motisi
[4329]	75	! Renamed wall_flags_0 to wall_flags_static_0
[4648]	76	!
[4329]	77	! 4328 2019-12-09 18:53:04Z suehring
[4328]	78	! Minor change in nzb_max computation. Commentation added.
[4648]	79	!
[4328]	80	! 4314 2019-11-29 10:29:20Z suehring
[4648]	81	! Set additional topography flag 4 to mark topography grid points emerged from the filtering process.
	82	!
[4314]	83	! 4294 2019-11-13 18:34:16Z suehring
[4648]	84	! Bugfix, always set bit 5 and 6 of wall_flags, indicating terrain- and building surfaces in all
	85	! cases, in order to enable terrain-following output also when no land- or urban-surface model is
	86	! applied.
	87	!
[4294]	88	! 4265 2019-10-15 16:16:24Z suehring
[4648]	89	! Bugfix for last commit, exchange oro_max variable only when it is allocated (not necessarily the
	90	! case when topography is input from ASCII file).
	91	!
[4265]	92	! 4245 2019-09-30 08:40:37Z pavelkrc
[4245]	93	! Store oro_max (building z-offset) in 2D for building surfaces
[4648]	94	!
[4245]	95	! 4189 2019-08-26 16:19:38Z suehring
[4189]	96	! - Add check for proper setting of namelist parameter topography
	97	! - Set flag to indicate land surfaces in case no topography is provided
[4648]	98	!
[4189]	99	! 4182 2019-08-22 15:20:23Z scharf
[4182]	100	! Corrected "Former revisions" section
[4648]	101	!
[4182]	102	! 4168 2019-08-16 13:50:17Z suehring
[4648]	103	! Pre-calculate topography top index and store it on an array (replaces former functions
	104	! get_topography_top_index)
	105	!
[4168]	106	! 4159 2019-08-15 13:31:35Z suehring
[4648]	107	! Revision of topography processing. This was not consistent between 2D and 3D buildings.
	108	!
[4159]	109	! 4144 2019-08-06 09:11:47Z raasch
[4144]	110	! relational operators .EQ., .NE., etc. replaced by ==, /=, etc.
[4648]	111	!
[4144]	112	! 4115 2019-07-24 12:50:49Z suehring
[4648]	113	! Bugfix in setting near-surface flag 24, inidicating wall-bounded grid points
	114	!
[4115]	115	! 4110 2019-07-22 17:05:21Z suehring
[4110]	116	! - Separate initialization of advection flags for momentum and scalars.
	117	! - Change subroutine interface for ws_init_flags_scalar to pass boundary flags
[4648]	118	!
[4110]	119	! 4109 2019-07-22 17:00:34Z suehring
[3927]	120	! Fix bad commit
[4648]	121	!
[3927]	122	! 3926 2019-04-23 12:56:42Z suehring
[4648]	123	! Minor bugfix in building mapping when all building IDs in the model domain are missing
	124	!
[3925]	125	! 3857 2019-04-03 13:00:16Z knoop
[4648]	126	! In projection of non-building 3D objects onto numerical grid remove dependency on building_type
	127	!
[3855]	128	! 3763 2019-02-25 17:33:49Z suehring
[4648]	129	! Replace work-around for ghost point exchange of 1-byte arrays with specific routine as already
	130	! done in other routines
	131	!
[3763]	132	! 3761 2019-02-25 15:31:42Z raasch
[3761]	133	! unused variables removed
[4648]	134	!
[3761]	135	! 3661 2019-01-08 18:22:50Z suehring
[4648]	136	! Remove setting of nzb_max to nzt at non-cyclic boundary PEs, instead, order degradation of
	137	! advection scheme is handeled directly in advec_ws
	138	!
[3661]	139	! 3655 2019-01-07 16:51:22Z knoop
[3538]	140	! Comment added
[2716]	141	!
[4182]	142	! Revision 1.1 1997/08/11 06:17:45 raasch
	143	! Initial revision (Testversion)
	144	!
	145	!
[1]	146	! Description:
[4648]	147	! -------------------------------------------------------------------------------------------------!
[1682]	148	!> Creating grid depending constants
[2696]	149	!> @todo: Rearrange topo flag list
[4648]	150	!> @todo: reference 3D buildings on top of orography is not tested and may need further improvement
	151	!> for steep slopes
	152	!> @todo: Use more advanced setting of building type at filled holes
	153	!--------------------------------------------------------------------------------------------------!
[1682]	154	SUBROUTINE init_grid
[1]	155
[4648]	156	USE arrays_3d, &
[3857]	157	ONLY: dd2zu, ddzu, ddzu_pres, ddzw, dzu, dzw, x, xu, y, yv, zu, zw
[4414]	158
[4648]	159	USE control_parameters, &
	160	ONLY: constant_flux_layer, dz, dz_max, dz_stretch_factor, &
	161	dz_stretch_factor_array, dz_stretch_level, dz_stretch_level_end, &
	162	dz_stretch_level_end_index, dz_stretch_level_start_index, &
	163	dz_stretch_level_start, ibc_uv_b, message_string, &
	164	number_stretch_level_end, &
	165	number_stretch_level_start, &
	166	ocean_mode, &
	167	psolver, &
	168	symmetry_flag, &
	169	topography, &
[4414]	170	use_surface_fluxes
	171
[4648]	172	USE grid_variables, &
[2232]	173	ONLY: ddx, ddx2, ddy, ddy2, dx, dx2, dy, dy2, zu_s_inner, zw_w_inner
[4414]	174
[4648]	175	USE indices, &
	176	ONLY: nbgp, &
	177	nx, &
	178	nxl, &
	179	nxlg, &
	180	nxr, &
	181	nxrg, &
	182	ny, &
	183	nyn, &
	184	nyng, &
	185	nys, &
	186	nysg, &
	187	nz, &
	188	nzb, &
	189	nzb_diff, &
	190	nzb_max, &
	191	nzt, &
	192	topo_top_ind, &
[4414]	193	topo_min_level
	194
[1320]	195	USE kinds
[2696]	196
[1]	197	USE pegrid
	198
	199	IMPLICIT NONE
	200
[4648]	201	INTEGER(iwp) :: i !< index variable along x
[3182]	202	INTEGER(iwp) :: j !< index variable along y
	203	INTEGER(iwp) :: k !< index variable along z
	204	INTEGER(iwp) :: k_top !< topography top index on local PE
	205	INTEGER(iwp) :: n !< loop variable for stretching
[4648]	206	INTEGER(iwp) :: number_dz !< number of user-specified dz values
[3182]	207	INTEGER(iwp) :: nzb_local_max !< vertical grid index of maximum topography height
	208	INTEGER(iwp) :: nzb_local_min !< vertical grid index of minimum topography height
[1]	209
[2696]	210	INTEGER(iwp), DIMENSION(:,:,:), ALLOCATABLE :: topo !< input array for 3D topography and dummy array for setting "outer"-flags
[2232]	211
[3065]	212	REAL(wp) :: dz_level_end !< distance between calculated height level for u/v-grid and user-specified end level for stretching
[1886]	213	REAL(wp) :: dz_stretched !< stretched vertical grid spacing
[861]	214
[4648]	215	REAL(wp), DIMENSION(:), ALLOCATABLE :: min_dz_stretch_level_end !< Array that contains all minimum heights where the stretching
	216	!< can end
[1]	217
[4648]	218
[1]	219	!
[709]	220	!-- Calculation of horizontal array bounds including ghost layers
[667]	221	nxlg = nxl - nbgp
	222	nxrg = nxr + nbgp
	223	nysg = nys - nbgp
	224	nyng = nyn + nbgp
[709]	225
[667]	226	!
[1]	227	!-- Allocate grid arrays
[4386]	228	ALLOCATE( x(0:nx) )
	229	ALLOCATE( xu(0:nx) )
[4648]	230
[3857]	231	DO i = 0, nx
	232	xu(i) = i * dx
	233	x(i) = i * dx + 0.5_wp * dx
	234	ENDDO
	235
[4386]	236	ALLOCATE( y(0:ny) )
	237	ALLOCATE( yv(0:ny) )
[4648]	238
[3857]	239	DO j = 0, ny
	240	yv(j) = j * dy
	241	y(j) = j * dy + 0.5_wp * dy
	242	ENDDO
	243
[4386]	244	ALLOCATE( ddzu(1:nzt+1) )
	245	ALLOCATE( ddzw(1:nzt+1) )
	246	ALLOCATE( dd2zu(1:nzt) )
	247	ALLOCATE( dzu(1:nzt+1) )
	248	ALLOCATE( dzw(1:nzt+1) )
	249	ALLOCATE( zu(nzb:nzt+1) )
	250	ALLOCATE( zw(nzb:nzt+1) )
[1]	251
	252	!
[4648]	253	!-- For constructing an appropriate grid, the vertical grid spacing dz has to be specified with a
	254	!-- non-negative value in the parameter file.
[3065]	255	IF ( dz(1) == -1.0_wp ) THEN
[254]	256	message_string = 'missing dz'
[4648]	257	CALL message( 'init_grid', 'PA0200', 1, 2, 0, 6, 0 )
[3065]	258	ELSEIF ( dz(1) <= 0.0_wp ) THEN
	259	WRITE( message_string, * ) 'dz=',dz(1),' <= 0.0'
[254]	260	CALL message( 'init_grid', 'PA0201', 1, 2, 0, 6, 0 )
[1]	261	ENDIF
[94]	262
[1]	263	!
[4648]	264	!-- Initialize dz_stretch_level_start with the value of dz_stretch_level if it was set by the user.
[3065]	265	IF ( dz_stretch_level /= -9999999.9_wp ) THEN
	266	dz_stretch_level_start(1) = dz_stretch_level
	267	ENDIF
[4648]	268
[3065]	269	!
[4648]	270	!-- Determine number of dz values and stretching levels specified by the user to allow right
	271	!-- controlling of the stretching mechanism and to perform error checks. The additional requirement
	272	!-- that dz /= dz_max for counting number of user-specified dz values is necessary. Otherwise
	273	!-- restarts would abort if the old stretching mechanism with dz_stretch_level is used (Attention:
	274	!-- The user is not allowed to specify a dz value equal to the default of dz_max = 999.0).
	275	number_dz = COUNT( dz /= -1.0_wp .AND. dz /= dz_max)
	276	number_stretch_level_start = COUNT( dz_stretch_level_start /= -9999999.9_wp )
	277	number_stretch_level_end = COUNT( dz_stretch_level_end /= 9999999.9_wp )
[3065]	278
	279	!
[4648]	280	!-- The number of specified end levels +1 has to be the same as the number
[3065]	281	!-- of specified dz values
	282	IF ( number_dz /= number_stretch_level_end + 1 ) THEN
[4648]	283	WRITE( message_string, * ) 'The number of values for dz = ', number_dz, &
	284	'has to be the same as& ', 'the number of values for ', &
	285	'dz_stretch_level_end + 1 = ', number_stretch_level_end+1
[4601]	286	CALL message( 'init_grid', 'PA0156', 1, 2, 0, 6, 0 )
[3065]	287	ENDIF
[4648]	288
[3065]	289	!
[4648]	290	!-- The number of specified start levels has to be the same or one less than the number of specified
	291	!-- dz values
	292	IF ( number_dz /= number_stretch_level_start + 1 .AND. &
	293	number_dz /= number_stretch_level_start ) THEN
	294	WRITE( message_string, * ) 'The number of values for dz = ', number_dz, &
	295	'has to be the same as or one ', &
	296	'more than& the number of values for ', &
	297	'dz_stretch_level_start = ', number_stretch_level_start
[4601]	298	CALL message( 'init_grid', 'PA0211', 1, 2, 0, 6, 0 )
[3065]	299	ENDIF
[4648]	300
	301	!-- The number of specified start levels has to be the same or one more than the number of specified
	302	!-- end levels
	303	IF ( number_stretch_level_start /= number_stretch_level_end + 1 .AND. &
[3065]	304	number_stretch_level_start /= number_stretch_level_end ) THEN
[4648]	305	WRITE( message_string, * ) 'The number of values for ', &
	306	'dz_stretch_level_start = ', dz_stretch_level_start, &
	307	'has to be the ', 'same or one more than& the number of ', &
	308	'values for dz_stretch_level_end = ', number_stretch_level_end
[4601]	309	CALL message( 'init_grid', 'PA0216', 1, 2, 0, 6, 0 )
[3065]	310	ENDIF
	311
	312	!
	313	!-- Initialize dz for the free atmosphere with the value of dz_max
[4648]	314	IF ( dz(number_stretch_level_start+1) == -1.0_wp .AND. number_stretch_level_start /= 0 ) THEN
[3065]	315	dz(number_stretch_level_start+1) = dz_max
	316	ENDIF
[4648]	317
[3065]	318	!
[4648]	319	!-- Initialize the stretching factor if (infinitely) stretching in the free atmosphere is desired
	320	!-- (dz_stretch_level_end was not specified for the free atmosphere)
	321	IF ( number_stretch_level_start == number_stretch_level_end + 1 ) THEN
	322	dz_stretch_factor_array(number_stretch_level_start) = dz_stretch_factor
[3065]	323	ENDIF
[4648]	324
[3065]	325	!
	326	!-- Allocation of arrays for stretching
	327	ALLOCATE( min_dz_stretch_level_end(number_stretch_level_start) )
[3066]	328
[3065]	329	!
[4386]	330	!-- Define the vertical grid levels. Start with atmosphere branch
[3294]	331	IF ( .NOT. ocean_mode ) THEN
[4648]	332
[94]	333	!
[4648]	334	!-- The stretching region has to be large enough to allow for a smooth transition between two
	335	!-- different grid spacings. The number 4 is an empirical value.
[3065]	336	DO n = 1, number_stretch_level_start
[4648]	337	min_dz_stretch_level_end(n) = dz_stretch_level_start(n) + 4 * MAX( dz(n),dz(n+1) )
[3065]	338	ENDDO
	339
[4648]	340	IF ( ANY( min_dz_stretch_level_end(1:number_stretch_level_start) > &
	341	dz_stretch_level_end(1:number_stretch_level_start) ) ) THEN
	342	message_string= 'Each dz_stretch_level_end has to be larger ' // &
	343	'than its corresponding value for &' // &
	344	'dz_stretch_level_start + 4*MAX(dz(n),dz(n+1)) '// &
[4601]	345	'to allow for smooth grid stretching'
	346	CALL message( 'init_grid', 'PA0224', 1, 2, 0, 6, 0 )
[3065]	347	ENDIF
[4648]	348
[3065]	349	!
[4648]	350	!-- Stretching must not be applied within the surface layer (first two grid points). For the
	351	!-- default case dz_stretch_level_start is negative. Therefore the absolut value is checked here.
[4386]	352	IF ( ANY( ABS( dz_stretch_level_start ) <= dz(1) * 1.5_wp ) ) THEN
[4648]	353	WRITE( message_string, * ) 'Each dz_stretch_level_start has to be ', &
	354	'larger than ', dz(1) * 1.5
[4601]	355	CALL message( 'init_grid', 'PA0226', 1, 2, 0, 6, 0 )
[3065]	356	ENDIF
	357
	358	!
[4648]	359	!-- The stretching has to start and end on a grid level. Therefore user-specified values are
	360	!-- mapped to the next lowest level. The calculation of the first level is realized differently
	361	!-- just because of historical reasons (the advanced/new stretching mechanism was realized in a
	362	!-- way that results don't change if the old parameters dz_stretch_level, dz_stretch_factor and
	363	!-- dz_max are used).
	364	IF ( number_stretch_level_start /= 0 ) THEN
	365	dz_stretch_level_start(1) = INT( (dz_stretch_level_start(1) - dz(1)/2.0) / dz(1) ) &
[3065]	366	* dz(1) + dz(1)/2.0
	367	ENDIF
[4648]	368
[3065]	369	IF ( number_stretch_level_start > 1 ) THEN
	370	DO n = 2, number_stretch_level_start
[4648]	371	dz_stretch_level_start(n) = INT( dz_stretch_level_start(n) / dz(n) ) * dz(n)
[3065]	372	ENDDO
	373	ENDIF
[4648]	374
[3065]	375	IF ( number_stretch_level_end /= 0 ) THEN
	376	DO n = 1, number_stretch_level_end
[4648]	377	dz_stretch_level_end(n) = INT( dz_stretch_level_end(n) / dz(n+1) ) * dz(n+1)
[3065]	378	ENDDO
	379	ENDIF
[4386]	380
[3065]	381	!
	382	!-- Determine stretching factor if necessary
[4648]	383	IF ( number_stretch_level_end >= 1 ) THEN
[3065]	384	CALL calculate_stretching_factor( number_stretch_level_end )
	385	ENDIF
	386
	387	!
[94]	388	!-- Grid for atmosphere with surface at z=0 (k=0, w-grid).
[4648]	389	!-- First compute the u- and v-levels. In case of dirichlet bc for u and v the first u/v- and
	390	!-- w-level (k=0) are defined at same height (z=0).
	391	!-- The second u-level (k=1) corresponds to the top of the surface layer. In case of symmetric
	392	!-- boundaries (closed channel flow), the first grid point is always at z=0.
	393	IF ( ibc_uv_b == 0 .OR. ibc_uv_b == 2 .OR. topography == 'closed_channel' ) THEN
[1353]	394	zu(0) = 0.0_wp
[667]	395	ELSE
[3065]	396	zu(0) = - dz(1) * 0.5_wp
[667]	397	ENDIF
[4648]	398
[3065]	399	zu(1) = dz(1) * 0.5_wp
[4648]	400
[3065]	401	!
[4648]	402	!-- Determine u and v height levels considering the possibility of grid stretching in several
	403	!-- heights.
[3065]	404	n = 1
	405	dz_stretch_level_start_index = nzt+1
	406	dz_stretch_level_end_index = nzt+1
	407	dz_stretched = dz(1)
[1]	408
[4648]	409	!-- The default value of dz_stretch_level_start is negative, thus the first condition is true
	410	!-- even if no stretching shall be applied. Hence, the second condition is also necessary.
[4340]	411	DO k = 2, nzt+1-symmetry_flag
[4648]	412	IF ( dz_stretch_level_start(n) <= zu(k-1) .AND. &
	413	dz_stretch_level_start(n) /= -9999999.9_wp ) THEN
[3065]	414	dz_stretched = dz_stretched * dz_stretch_factor_array(n)
[4648]	415
	416	IF ( dz(n) > dz(n+1) ) THEN
[3065]	417	dz_stretched = MAX( dz_stretched, dz(n+1) ) !Restrict dz_stretched to the user-specified (higher) dz
	418	ELSE
	419	dz_stretched = MIN( dz_stretched, dz(n+1) ) !Restrict dz_stretched to the user-specified (lower) dz
	420	ENDIF
[4648]	421
	422	IF ( dz_stretch_level_start_index(n) == nzt+1 ) dz_stretch_level_start_index(n) = k-1
	423
[94]	424	ENDIF
[4648]	425
[94]	426	zu(k) = zu(k-1) + dz_stretched
[4648]	427
[3065]	428	!
[4648]	429	!-- Make sure that the stretching ends exactly at dz_stretch_level_end
	430	dz_level_end = ABS( zu(k) - dz_stretch_level_end(n) )
	431
	432	IF ( dz_level_end < dz(n+1)/3.0 ) THEN
[3065]	433	zu(k) = dz_stretch_level_end(n)
	434	dz_stretched = dz(n+1)
	435	dz_stretch_level_end_index(n) = k
[4648]	436	n = n + 1
[3065]	437	ENDIF
[94]	438	ENDDO
[4648]	439
[4340]	440	!
[4648]	441	!-- If a closed channel flow is simulated, make sure that grid structure is the same for both
	442	!-- bottom and top boundary. (Hint: Using a different dz at the bottom and at the top makes no
	443	!-- sense due to symmetric boundaries where dz should be equal. Therefore, different dz at the
	444	!-- bottom and top causes an abort (see check_parameters).)
	445	IF ( topography == 'closed_channel' ) THEN
[4340]	446	zu(nzt+1) = zu(nzt) + dz(1) * 0.5_wp
	447	ENDIF
[1]	448
	449	!
[4648]	450	!-- Compute the w-levels. They are always staggered half-way between the corresponding u-levels.
	451	!-- In case of dirichlet bc for u and v at the ground the first u- and w-level (k=0) are defined
	452	!-- at same height (z=0).
	453	!-- Per default, the top w-level is extrapolated linearly. In case of a closed channel flow,
	454	!-- zu(nzt+1) and zw(nzt) must be set explicitely.
	455	!-- (Hint: Using a different dz at the bottom and at the top makes no sense due to symmetric
	456	!-- boundaries where dz should be equal. Therefore, different dz at the bottom and top causes an
	457	!-- abort (see check_parameters).)
[1353]	458	zw(0) = 0.0_wp
[4340]	459	DO k = 1, nzt-symmetry_flag
[1353]	460	zw(k) = ( zu(k) + zu(k+1) ) * 0.5_wp
[94]	461	ENDDO
[4648]	462	IF ( topography == 'closed_channel' ) THEN
[4340]	463	zw(nzt) = zw(nzt-1) + dz(1)
	464	zw(nzt+1) = zw(nzt) + dz(1)
	465	ELSE
	466	zw(nzt+1) = zw(nzt) + 2.0_wp * ( zu(nzt+1) - zw(nzt) )
	467	ENDIF
[1]	468
[4386]	469	ELSE !ocean branch
[3065]	470
[1]	471	!
[4648]	472	!-- The stretching region has to be large enough to allow for a smooth transition between two
	473	!-- different grid spacings. The number 4 is an empirical value
[3065]	474	DO n = 1, number_stretch_level_start
[4648]	475	min_dz_stretch_level_end(n) = dz_stretch_level_start(n) - 4 * MAX( dz(n),dz(n+1) )
[3065]	476	ENDDO
[4648]	477
	478	IF ( ANY( min_dz_stretch_level_end (1:number_stretch_level_start) < &
	479	dz_stretch_level_end(1:number_stretch_level_start) ) ) THEN
	480	message_string= 'Each dz_stretch_level_end has to be less ' // &
	481	'than its corresponding value for &' // &
	482	'dz_stretch_level_start - 4*MAX(dz(n),dz(n+1)) '// &
[3065]	483	'to allow for smooth grid stretching'
	484	CALL message( 'init_grid', 'PA0224', 1, 2, 0, 6, 0 )
	485	ENDIF
[4648]	486
[3065]	487	!
[4648]	488	!-- Stretching must not be applied close to the surface (last two grid points). For the default
	489	!-- case dz_stretch_level_start is negative.
	490	IF ( ANY( dz_stretch_level_start >= - dz(1) * 1.5_wp ) ) THEN
	491	WRITE( message_string, * ) 'Each dz_stretch_level_start has to be ', &
	492	'less than ', -dz(1) * 1.5
[3065]	493	CALL message( 'init_grid', 'PA0226', 1, 2, 0, 6, 0 )
	494	ENDIF
	495
	496	!
[4648]	497	!-- The stretching has to start and end on a grid level. Therefore user-specified values are
	498	!-- mapped to the next highest level. The calculation of the first level is realized differently
	499	!-- just because of historical reasons (the advanced/new stretching mechanism was realized in a
	500	!-- way that results don't change if the old parameters dz_stretch_level, dz_stretch_factor and
	501	!-- dz_max are used)
	502	IF ( number_stretch_level_start /= 0 ) THEN
	503	dz_stretch_level_start(1) = INT( (dz_stretch_level_start(1) + dz(1)/2.0) / dz(1) ) &
[3065]	504	* dz(1) - dz(1)/2.0
	505	ENDIF
[4648]	506
	507	IF ( number_stretch_level_start > 1 ) THEN
[3065]	508	DO n = 2, number_stretch_level_start
[4648]	509	dz_stretch_level_start(n) = INT( dz_stretch_level_start(n) / dz(n) ) * dz(n)
[3065]	510	ENDDO
	511	ENDIF
[4648]	512
	513	IF ( number_stretch_level_end /= 0 ) THEN
[3065]	514	DO n = 1, number_stretch_level_end
[4648]	515	dz_stretch_level_end(n) = INT( dz_stretch_level_end(n) / dz(n+1) ) * dz(n+1)
[3065]	516	ENDDO
	517	ENDIF
[4648]	518
[3065]	519	!
	520	!-- Determine stretching factor if necessary
[4648]	521	IF ( number_stretch_level_end >= 1 ) THEN
[3065]	522	CALL calculate_stretching_factor( number_stretch_level_end )
	523	ENDIF
	524
	525	!
[843]	526	!-- Grid for ocean with free water surface is at k=nzt (w-grid).
[4648]	527	!-- In case of neumann bc at the ground the first first u-level (k=0) lies below the first
	528	!-- w-level (k=0). In case of dirichlet bc the first u- and w-level are defined at same height,
	529	!-- but staggered from the second level.
[4386]	530	!-- The second u-level (k=1) corresponds to the top of the surface layer.
[3065]	531	!-- z values are negative starting from z=0 (surface)
	532	zu(nzt+1) = dz(1) * 0.5_wp
	533	zu(nzt) = - dz(1) * 0.5_wp
[94]	534
[3065]	535	!
[4648]	536	!-- Determine u and v height levels considering the possibility of grid stretching in several
	537	!-- heights.
[3065]	538	n = 1
	539	dz_stretch_level_start_index = 0
	540	dz_stretch_level_end_index = 0
	541	dz_stretched = dz(1)
	542
[94]	543	DO k = nzt-1, 0, -1
[4648]	544
	545	IF ( dz_stretch_level_start(n) >= zu(k+1) ) THEN
[3065]	546	dz_stretched = dz_stretched * dz_stretch_factor_array(n)
	547
[4648]	548	IF ( dz(n) > dz(n+1) ) THEN
[3065]	549	dz_stretched = MAX( dz_stretched, dz(n+1) ) !Restrict dz_stretched to the user-specified (higher) dz
	550	ELSE
	551	dz_stretched = MIN( dz_stretched, dz(n+1) ) !Restrict dz_stretched to the user-specified (lower) dz
	552	ENDIF
[4648]	553
	554	IF ( dz_stretch_level_start_index(n) == 0 ) dz_stretch_level_start_index(n) = k+1
	555
[3065]	556	ENDIF
[4648]	557
[3065]	558	zu(k) = zu(k+1) - dz_stretched
[4648]	559
[1418]	560	!
[4648]	561	!-- Make sure that the stretching ends exactly at dz_stretch_level_end
	562	dz_level_end = ABS( zu(k) - dz_stretch_level_end(n) )
	563
	564	IF ( dz_level_end < dz(n+1)/3.0 ) THEN
[3065]	565	zu(k) = dz_stretch_level_end(n)
	566	dz_stretched = dz(n+1)
	567	dz_stretch_level_end_index(n) = k
[4648]	568	n = n + 1
[94]	569	ENDIF
	570	ENDDO
[4648]	571
[94]	572	!
[4648]	573	!-- Compute the w-levels. They are always staggered half-way between the corresponding u-levels,
	574	!-- except in case of dirichlet bc for u and v at the ground. In this case the first u- and
	575	!-- w-level are defined at same height. The top w-level (nzt+1) is not used but set for
[843]	576	!-- consistency, since w and all scalar variables are defined up tp nzt+1.
[3065]	577	zw(nzt+1) = dz(1)
[1353]	578	zw(nzt) = 0.0_wp
[94]	579	DO k = 0, nzt
[1353]	580	zw(k) = ( zu(k) + zu(k+1) ) * 0.5_wp
[94]	581	ENDDO
	582
[843]	583	!
[4648]	584	!-- In case of dirichlet bc for u and v the first u- and w-level are defined at same height.
[843]	585	IF ( ibc_uv_b == 0 ) THEN
	586	zu(0) = zw(0)
	587	ENDIF
	588
[4386]	589	ENDIF !End of defining the vertical grid levels
[94]	590
	591	!
[1]	592	!-- Compute grid lengths.
	593	DO k = 1, nzt+1
	594	dzu(k) = zu(k) - zu(k-1)
[1353]	595	ddzu(k) = 1.0_wp / dzu(k)
[1]	596	dzw(k) = zw(k) - zw(k-1)
[1353]	597	ddzw(k) = 1.0_wp / dzw(k)
[1]	598	ENDDO
	599
	600	DO k = 1, nzt
[1353]	601	dd2zu(k) = 1.0_wp / ( dzu(k) + dzu(k+1) )
[1]	602	ENDDO
[4648]	603
	604	!
	605	!-- The FFT- SOR-pressure solvers assume grid spacings of a staggered grid everywhere. For the
	606	!-- actual grid, the grid spacing at the lowest level is only dz/2, but should be dz. Therefore, an
	607	!-- additional array containing with appropriate grid information is created for these solvers.
[1575]	608	IF ( psolver(1:9) /= 'multigrid' ) THEN
[667]	609	ALLOCATE( ddzu_pres(1:nzt+1) )
	610	ddzu_pres = ddzu
[864]	611	ddzu_pres(1) = ddzu_pres(2) ! change for lowest level
[1]	612	ENDIF
	613
	614	!
	615	!-- Compute the reciprocal values of the horizontal grid lengths.
[1353]	616	ddx = 1.0_wp / dx
	617	ddy = 1.0_wp / dy
[1]	618	dx2 = dx * dx
	619	dy2 = dy * dy
[1353]	620	ddx2 = 1.0_wp / dx2
	621	ddy2 = 1.0_wp / dy2
[1]	622
	623	!
[2696]	624	!-- Allocate 3D array to set topography
	625	ALLOCATE( topo(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	626	topo = 0
	627	!
[4648]	628	!-- Initialize topography by generic topography or read topography from file.
[2696]	629	CALL init_topo( topo )
	630	!
[4648]	631	!-- Set flags to mask topography on the grid.
[4414]	632	CALL set_topo_flags( topo )
[2696]	633
	634	!
[4648]	635	!-- Determine the maximum level of topography. It is used for steering the degradation of order of
	636	!-- the applied advection scheme, as well in the lpm.
[2696]	637	k_top = 0
	638	DO i = nxl, nxr
	639	DO j = nys, nyn
	640	DO k = nzb, nzt + 1
[4109]	641	k_top = MAX( k_top, MERGE( k, 0, .NOT. BTEST( topo(k,j,i), 0 ) ) )
[2696]	642	ENDDO
	643	ENDDO
[1]	644	ENDDO
[2696]	645	#if defined( __parallel )
[4648]	646	CALL MPI_ALLREDUCE( k_top, nzb_max, 1, MPI_INTEGER, MPI_MAX, comm2d, ierr )
[2696]	647	#else
[4328]	648	nzb_max = k_top
[2696]	649	#endif
[1]	650	!
[4328]	651	!-- Increment nzb_max by 1 in order to allow for proper diverengence correction.
	652	!-- Further, in case topography extents up to the model top, limit to nzt.
[4648]	653	nzb_max = MIN( nzb_max+1, nzt )
[4328]	654	!
[4648]	655	!-- Determine minimum index of topography. Usually, this will be nzb. In case there is elevated
	656	!-- topography, however, the lowest topography will be higher.
	657	!-- This index is e.g. used to calculate mean first-grid point atmosphere temperature, surface
	658	!-- pressure and density, etc. .
[2968]	659	topo_min_level = 0
	660	#if defined( __parallel )
[4648]	661	CALL MPI_ALLREDUCE( MINVAL( topo_top_ind(nys:nyn,nxl:nxr,0) ), topo_min_level, 1, MPI_INTEGER, &
	662	MPI_MIN, comm2d, ierr )
[2968]	663	#else
[4168]	664	topo_min_level = MINVAL( topo_top_ind(nys:nyn,nxl:nxr,0) )
[2968]	665	#endif
[3182]	666
[2696]	667	!
[4648]	668	!-- Check topography for consistency with model domain. Therefore, use maximum and minium
	669	!-- topography-top indices. Note, minimum topography top index is already calculated.
[2696]	670	IF ( TRIM( topography ) /= 'flat' ) THEN
	671	#if defined( __parallel )
[4648]	672	CALL MPI_ALLREDUCE( MAXVAL( topo_top_ind(nys:nyn,nxl:nxr,0) ), nzb_local_max, 1, &
	673	MPI_INTEGER, MPI_MAX, comm2d, ierr )
[2696]	674	#else
[4168]	675	nzb_local_max = MAXVAL( topo_top_ind(nys:nyn,nxl:nxr,0) )
[2696]	676	#endif
[2968]	677	nzb_local_min = topo_min_level
[2696]	678	!
	679	!-- Consistency checks
	680	IF ( nzb_local_min < 0 .OR. nzb_local_max > nz + 1 ) THEN
[4648]	681	WRITE( message_string, * ) 'nzb_local values are outside the model domain', &
	682	'&MINVAL( nzb_local ) = ', nzb_local_min, &
	683	'&MAXVAL( nzb_local ) = ', nzb_local_max
[2696]	684	CALL message( 'init_grid', 'PA0210', 1, 2, 0, 6, 0 )
	685	ENDIF
	686	ENDIF
[1]	687	!
[4648]	688	!-- Define vertical gridpoint from (or to) which on the usual finite difference form (which does not
	689	!-- use surface fluxes) is applied.
[1691]	690	IF ( constant_flux_layer .OR. use_surface_fluxes ) THEN
[1]	691	nzb_diff = nzb + 2
	692	ELSE
	693	nzb_diff = nzb + 1
	694	ENDIF
	695
[4414]	696	IF ( TRIM( topography ) /= 'flat' ) THEN
[2696]	697	!
[4648]	698	!-- Allocate and set the arrays containing the topography height (for output reasons only).
[4414]	699	IF ( nxr == nx .AND. nyn /= ny ) THEN
[4648]	700	ALLOCATE( zu_s_inner(nxl:nxr+1,nys:nyn), zw_w_inner(nxl:nxr+1,nys:nyn) )
[4414]	701	ELSEIF ( nxr /= nx .AND. nyn == ny ) THEN
[4648]	702	ALLOCATE( zu_s_inner(nxl:nxr,nys:nyn+1), zw_w_inner(nxl:nxr,nys:nyn+1) )
[4414]	703	ELSEIF ( nxr == nx .AND. nyn == ny ) THEN
[4648]	704	ALLOCATE( zu_s_inner(nxl:nxr+1,nys:nyn+1), zw_w_inner(nxl:nxr+1,nys:nyn+1) )
[4414]	705	ELSE
[4648]	706	ALLOCATE( zu_s_inner(nxl:nxr,nys:nyn), zw_w_inner(nxl:nxr,nys:nyn) )
[2696]	707	ENDIF
[1]	708
[4414]	709	zu_s_inner = 0.0_wp
	710	zw_w_inner = 0.0_wp
[1]	711	!
[4648]	712	!-- Determine local topography height on scalar and w-grid. Note, setting lateral boundary values
	713	!-- is not necessary, realized via wall_flags_static_0 array. Further, please note that loop
	714	!-- bounds are different from nxl to nxr and nys to nyn on south and right model boundary, hence,
[4414]	715	!-- use intrinsic lbound and ubound functions to infer array bounds.
	716	DO i = LBOUND(zu_s_inner, 1), UBOUND(zu_s_inner, 1)
	717	DO j = LBOUND(zu_s_inner, 2), UBOUND(zu_s_inner, 2)
[2696]	718	!
[4648]	719	!-- Topography height on scalar grid. Therefore, determine index of upward-facing surface
	720	!-- element on scalar grid.
[4414]	721	zu_s_inner(i,j) = zu(topo_top_ind(j,i,0))
[2696]	722	!
[4648]	723	!-- Topography height on w grid. Therefore, determine index of upward-facing surface
	724	!-- element on w grid.
[4414]	725	zw_w_inner(i,j) = zw(topo_top_ind(j,i,3))
	726	ENDDO
[2696]	727	ENDDO
	728	ENDIF
[4444]	729
[2696]	730	END SUBROUTINE init_grid
	731
[3065]	732
[2696]	733	! Description:
[4648]	734	! -------------------------------------------------------------------------------------------------!
	735	!> Calculation of the stretching factor through an iterative method. Ideas were taken from the paper
	736	!> "Regional stretched grid generation and its application to the NCAR RegCM (1999)". Normally, no
	737	!> analytic solution exists because the system of equations has two variables (r,l) but four
	738	!> requirements (l=integer, r=[0,88;1,2], Eq(6), Eq(5) starting from index j=1) which results into
	739	!> an overdetermined system.
	740	!--------------------------------------------------------------------------------------------------!
[3065]	741	SUBROUTINE calculate_stretching_factor( number_end )
[4648]	742
	743	USE control_parameters, &
	744	ONLY: dz, dz_stretch_factor_array, dz_stretch_level_end, dz_stretch_level_start, &
	745	message_string
	746
[3065]	747	USE kinds
[4648]	748
[3065]	749	IMPLICIT NONE
[4648]	750
	751	REAL(wp), PARAMETER :: stretch_factor_interval = 1.0E-06_wp !< interval for sampling possible stretching factors
	752	REAL(wp), PARAMETER :: stretch_factor_lower_limit = 0.88_wp !< lowest possible stretching factor
	753	REAL(wp), PARAMETER :: stretch_factor_upper_limit = 1.12_wp !< highest possible stretching factor
	754
	755	INTEGER(iwp) :: iterations !< number of iterations until stretch_factor_lower/upper_limit is reached
	756	INTEGER(iwp) :: l_rounded !< after l_rounded grid levels dz(n) is strechted to dz(n+1) with stretch_factor_2
[3065]	757	INTEGER(iwp) :: n !< loop variable for stretching
[4648]	758
[3065]	759	INTEGER(iwp), INTENT(IN) :: number_end !< number of user-specified end levels for stretching
[4648]	760
[3065]	761	REAL(wp) :: delta_l !< absolute difference between l and l_rounded
	762	REAL(wp) :: delta_stretch_factor !< absolute difference between stretch_factor_1 and stretch_factor_2
[4648]	763	REAL(wp) :: delta_total_new !< sum of delta_l and delta_stretch_factor for the next iteration (should be as small as
	764	!< possible)
	765	REAL(wp) :: delta_total_old !< sum of delta_l and delta_stretch_factor for the last iteration
[3065]	766	REAL(wp) :: distance !< distance between dz_stretch_level_start and dz_stretch_level_end (stretching region)
[4648]	767	REAL(wp) :: l !< value that fulfil Eq. (5) in the paper mentioned above together with stretch_factor_1
	768	!< exactly
[3065]	769	REAL(wp) :: numerator !< numerator of the quotient
	770	REAL(wp) :: stretch_factor_1 !< stretching factor that fulfil Eq. (5) togehter with l exactly
	771	REAL(wp) :: stretch_factor_2 !< stretching factor that fulfil Eq. (6) togehter with l_rounded exactly
[4648]	772
	773	REAL(wp) :: dz_stretch_factor_array_2(9) = 1.08_wp !< Array that contains all stretch_factor_2 that belongs to
	774	!< stretch_factor_1
	775
	776
[3068]	777	l = 0
	778	DO n = 1, number_end
[4648]	779
[3068]	780	iterations = 1
[4648]	781	stretch_factor_1 = 1.0_wp
[4386]	782	stretch_factor_2 = 1.0_wp
	783	delta_total_old = 1.0_wp
[4648]	784
[4386]	785	!
	786	!-- First branch for stretching from rough to fine
[4648]	787	IF ( dz(n) > dz(n+1) ) THEN
	788	DO WHILE ( stretch_factor_1 >= stretch_factor_lower_limit )
	789
[4386]	790	stretch_factor_1 = 1.0_wp - iterations * stretch_factor_interval
[4648]	791	distance = ABS( dz_stretch_level_end(n) - dz_stretch_level_start(n) )
	792	numerator = distance * stretch_factor_1 / dz(n) + stretch_factor_1 - distance / dz(n)
	793
	794	IF ( numerator > 0.0_wp ) THEN
[4386]	795	l = LOG( numerator ) / LOG( stretch_factor_1 ) - 1.0_wp
[3068]	796	l_rounded = NINT( l )
	797	delta_l = ABS( l_rounded - l ) / l
	798	ENDIF
[4648]	799
[3068]	800	stretch_factor_2 = EXP( LOG( dz(n+1)/dz(n) ) / (l_rounded) )
[4648]	801
	802	delta_stretch_factor = ABS( stretch_factor_1 - stretch_factor_2 ) / stretch_factor_2
	803
[3068]	804	delta_total_new = delta_l + delta_stretch_factor
[3065]	805
	806	!
[4648]	807	!-- stretch_factor_1 is taken to guarantee that the stretching procedure ends as close as
	808	!-- possible to dz_stretch_level_end.
	809	!-- stretch_factor_2 would guarantee that the stretched dz(n) is equal to dz(n+1) after
	810	!-- l_rounded grid levels.
	811	IF (delta_total_new < delta_total_old) THEN
[3068]	812	dz_stretch_factor_array(n) = stretch_factor_1
	813	dz_stretch_factor_array_2(n) = stretch_factor_2
	814	delta_total_old = delta_total_new
	815	ENDIF
[4648]	816
[3068]	817	iterations = iterations + 1
[4648]	818
[3068]	819	ENDDO
[4386]	820
	821	!
	822	!-- Second branch for stretching from fine to rough
[4648]	823	ELSEIF ( dz(n) < dz(n+1) ) THEN
[3068]	824	DO WHILE ( stretch_factor_1 <= stretch_factor_upper_limit )
[4648]	825
[4386]	826	stretch_factor_1 = 1.0_wp + iterations * stretch_factor_interval
[4648]	827	distance = ABS( dz_stretch_level_end(n) - dz_stretch_level_start(n) )
	828	numerator = distance * stretch_factor_1 / dz(n) + stretch_factor_1 - distance / dz(n)
	829
[4386]	830	l = LOG( numerator ) / LOG( stretch_factor_1 ) - 1.0_wp
[3068]	831	l_rounded = NINT( l )
	832	delta_l = ABS( l_rounded - l ) / l
[4648]	833
[3068]	834	stretch_factor_2 = EXP( LOG( dz(n+1)/dz(n) ) / (l_rounded) )
[3065]	835
[4648]	836	delta_stretch_factor = ABS( stretch_factor_1 - stretch_factor_2 ) / stretch_factor_2
	837
[3068]	838	delta_total_new = delta_l + delta_stretch_factor
[4648]	839
[3065]	840	!
[4648]	841	!-- stretch_factor_1 is taken to guarantee that the stretching procedure ends as close as
	842	!-- possible to dz_stretch_level_end.
	843	!-- stretch_factor_2 would guarantee that the stretched dz(n) is equal to dz(n+1) after
	844	!-- l_rounded grid levels.
	845	IF (delta_total_new < delta_total_old) THEN
[3068]	846	dz_stretch_factor_array(n) = stretch_factor_1
	847	dz_stretch_factor_array_2(n) = stretch_factor_2
	848	delta_total_old = delta_total_new
	849	ENDIF
[4648]	850
[3068]	851	iterations = iterations + 1
	852	ENDDO
[4648]	853
[3068]	854	ELSE
	855	message_string= 'Two adjacent values of dz must be different'
	856	CALL message( 'init_grid', 'PA0228', 1, 2, 0, 6, 0 )
[4648]	857
[3068]	858	ENDIF
	859
	860	!
[4648]	861	!-- Check if also the second stretching factor fits into the allowed interval. If not, print a
	862	!-- warning for the user.
	863	IF ( dz_stretch_factor_array_2(n) < stretch_factor_lower_limit .OR. &
	864	dz_stretch_factor_array_2(n) > stretch_factor_upper_limit ) THEN
	865	WRITE( message_string, * ) 'stretch_factor_2 = ', dz_stretch_factor_array_2(n), &
	866	' which is', ' responsible for exactly reaching& dz =', &
	867	dz(n+1), 'after a specific amount of', &
	868	' grid levels& exceeds the upper', &
	869	' limit =', stretch_factor_upper_limit, &
	870	' &or lower limit = ', stretch_factor_lower_limit
[3068]	871	CALL message( 'init_grid', 'PA0499', 0, 1, 0, 6, 0 )
[4648]	872
[3068]	873	ENDIF
	874	ENDDO
[4648]	875
[3065]	876	END SUBROUTINE calculate_stretching_factor
[4648]	877
	878
[3065]	879	! Description:
[4648]	880	! -------------------------------------------------------------------------------------------------!
	881	!> Set temporary topography flags and reference buildings on top of underlying orography.
	882	!--------------------------------------------------------------------------------------------------!
[2696]	883	SUBROUTINE process_topography( topo_3d )
	884
[4648]	885	USE arrays_3d, &
[2747]	886	ONLY: zu, zw
[2696]	887
[4648]	888	USE control_parameters, &
[4507]	889	ONLY: bc_lr_cyc, bc_ns_cyc, ocean_mode
[2696]	890
[4648]	891	USE exchange_horiz_mod, &
	892	ONLY: exchange_horiz_2d, exchange_horiz_int
[4457]	893
[4648]	894	USE indices, &
	895	ONLY: nbgp, nx, nxl, nxlg, nxr, nxrg, ny, nyn, nyng, nys, nysg, nzb, nzt
[2696]	896
[4648]	897	USE netcdf_data_input_mod, &
	898	ONLY: buildings_f, building_id_f, building_type_f, &
	899	init_model, &
	900	input_pids_static, &
[2696]	901	terrain_height_f
	902
	903	USE kinds
	904
	905	USE pegrid
	906
	907	IMPLICIT NONE
	908
[4722]	909	INTEGER(iwp) :: dim_builds !< total number of buildings within the model domain
[2867]	910	INTEGER(iwp) :: i !< running index along x-direction
	911	INTEGER(iwp) :: j !< running index along y-direction
	912	INTEGER(iwp) :: k !< running index along z-direction with respect to numeric grid
	913	INTEGER(iwp) :: k2 !< running index along z-direction with respect to netcdf grid
	914	INTEGER(iwp) :: nr !< index variable indication maximum terrain height for respective building ID
	915	INTEGER(iwp) :: num_build !< counter for number of buildings
	916	INTEGER(iwp) :: topo_top_index !< orography top index, used to map 3D buildings onto terrain
[2696]	917
[4444]	918	#if defined( __parallel )
[2696]	919	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: displace_dum !< displacements of start addresses, used for MPI_ALLGATHERV
[4444]	920	#endif
[2696]	921	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids !< building IDs on entire model domain
[4648]	922	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids_final !< building IDs on entire model domain, multiple occurences are
	923	!< sorted out
[2696]	924	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids_final_tmp !< temporary array used for resizing
	925	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids_l !< building IDs on local subdomain
	926	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids_l_tmp !< temporary array used to resize array of building IDs
	927
	928	INTEGER(iwp), DIMENSION(0:numprocs-1) :: num_buildings !< number of buildings with different ID on entire model domain
	929	INTEGER(iwp), DIMENSION(0:numprocs-1) :: num_buildings_l !< number of buildings with different ID on local subdomain
	930
[4648]	931	INTEGER(iwp), DIMENSION(nzb:nzt+1,nysg:nyng,nxlg:nxrg) :: topo_3d !< input array for 3D topography and dummy array for setting
	932	!< "outer"-flags
[2696]	933
[4648]	934	REAL(wp) :: ocean_offset !< offset to consider inverse vertical coordinate at topography
	935	!< definition
	936	REAL(wp) :: oro_min = 0.0_wp !< minimum terrain height in entire model domain, used to reference
	937	!< terrain to zero
[2696]	938	REAL(wp), DIMENSION(:), ALLOCATABLE :: oro_max !< maximum terrain height occupied by an building with certain id
[4648]	939	REAL(wp), DIMENSION(:), ALLOCATABLE :: oro_max_l !< maximum terrain height occupied by an building with certain id,
	940	!< on local subdomain
[2696]	941
	942	!
[4648]	943	!-- Reference lowest terrain height to zero. This ensures that first, non-required gird levels
	944	!-- (those which lie entirely below the minimum orography) are avoided, and second, that also
	945	!-- negative orography can be used within the input file.
	946	!-- Please note, in case of a nested run, the global minimum from all parent and childs needs to be
	947	!-- removed to avoid steep edges at the child-domain boundaries.
[3103]	948	IF ( input_pids_static ) THEN
[4648]	949
	950	#if defined( __parallel )
	951	CALL MPI_ALLREDUCE( MINVAL( terrain_height_f%var ), oro_min, 1, MPI_REAL, MPI_MIN, &
	952	MPI_COMM_WORLD, ierr )
[3200]	953	#else
	954	oro_min = MINVAL( terrain_height_f%var )
	955	#endif
[3103]	956	terrain_height_f%var = terrain_height_f%var - oro_min
[4507]	957	!
	958	!-- Update reference height used within output files
	959	init_model%origin_z = init_model%origin_z + oro_min
[4691]	960	!
	961	!-- ASCII topography branch. In this case, in contrast to the static driver input, topography is
	962	!-- assumed to be building; thus the minimum building height is substracted from the building array.
	963	ELSE
	964	#if defined( __parallel )
	965	CALL MPI_ALLREDUCE( MINVAL( buildings_f%var_2d ), oro_min, 1, MPI_REAL, MPI_MIN, &
	966	MPI_COMM_WORLD, ierr )
	967	#else
	968	oro_min = MINVAL( buildings_f%var_2d )
	969	#endif
	970	buildings_f%var_2d = buildings_f%var_2d - oro_min
	971	!
	972	!-- Update reference height used within output files
	973	init_model%origin_z = init_model%origin_z + oro_min
[4648]	974	ENDIF
	975
[3103]	976	!
[4648]	977	!-- In the following, buildings and orography are further preprocessed before they are mapped on the
	978	!-- LES grid.
	979	!-- Buildings are mapped on top of the orography by maintaining the roof shape of the building. This
	980	!-- can be achieved by referencing building on top of the maximum terrain height within the area
	981	!-- occupied by the respective building. As buildings and terrain height are defined PE-wise,
	982	!-- parallelization of this referencing is required (a building can be distributed between different
	983	!-- PEs).
	984	!-- In a first step, determine the number of buildings with different building id on each PE. In a
	985	!-- next step, all building ids are gathered into one array which is present to all PEs. For each
	986	!-- building ID, the maximum terrain height occupied by the respective building is computed and
	987	!-- distributed to each PE.
	988	!-- Finally, for each building id and its respective reference orography, builidings are mapped on
	989	!-- top.
	990	!--
	991	!-- First, pre-set topography flags, bit 1 indicates orography, bit 2 buildings classify the
	992	!-- respective surfaces.
[2696]	993	topo_3d = IBSET( topo_3d, 0 )
	994	topo_3d(nzb,:,:) = IBCLR( topo_3d(nzb,:,:), 0 )
	995	!
[4648]	996	!-- In order to map topography on PALM grid also in case of ocean simulations, pre-calculate an
	997	!-- offset value.
[3294]	998	ocean_offset = MERGE( zw(0), 0.0_wp, ocean_mode )
[3051]	999	!
[4648]	1000	!-- Reference buildings on top of orography. This is not necessary if topography is read from ASCII
	1001	!-- file as no distinction between buildings and terrain height can be made. Moreover, this is also
	1002	!-- not necessary if urban-surface and land-surface model are used at the same time.
[2897]	1003	IF ( input_pids_static ) THEN
	1004
[4648]	1005	IF ( buildings_f%from_file ) THEN
[2897]	1006	num_buildings_l = 0
	1007	num_buildings = 0
[2696]	1008	!
[4648]	1009	!-- Allocate at least one element for building ids and give it an inital negative value that
	1010	!-- will be overwritten later. This, however, is necessary in case there all IDs in the model
	1011	!-- domain are fill values.
[2897]	1012	ALLOCATE( build_ids_l(1) )
[4648]	1013	build_ids_l = -1
[2897]	1014	DO i = nxl, nxr
	1015	DO j = nys, nyn
	1016	IF ( building_id_f%var(j,i) /= building_id_f%fill ) THEN
	1017	IF ( num_buildings_l(myid) > 0 ) THEN
[4648]	1018	IF ( ANY( building_id_f%var(j,i) == build_ids_l ) ) THEN
[2897]	1019	CYCLE
	1020	ELSE
	1021	num_buildings_l(myid) = num_buildings_l(myid) + 1
[2696]	1022	!
	1023	!-- Resize array with different local building ids
	1024	ALLOCATE( build_ids_l_tmp(1:SIZE(build_ids_l)) )
	1025	build_ids_l_tmp = build_ids_l
	1026	DEALLOCATE( build_ids_l )
	1027	ALLOCATE( build_ids_l(1:num_buildings_l(myid)) )
[4648]	1028	build_ids_l(1:num_buildings_l(myid)-1) = &
	1029	build_ids_l_tmp(1:num_buildings_l(myid)-1)
[2696]	1030	build_ids_l(num_buildings_l(myid)) = building_id_f%var(j,i)
	1031	DEALLOCATE( build_ids_l_tmp )
	1032	ENDIF
	1033	!
[4648]	1034	!-- First occuring building id on PE
	1035	ELSE
[2897]	1036	num_buildings_l(myid) = num_buildings_l(myid) + 1
	1037	build_ids_l(1) = building_id_f%var(j,i)
	1038	ENDIF
[2696]	1039	ENDIF
[2897]	1040	ENDDO
[2696]	1041	ENDDO
	1042	!
[4648]	1043	!-- Determine number of different building ids for the entire domain
	1044	#if defined( __parallel )
	1045	CALL MPI_ALLREDUCE( num_buildings_l, num_buildings, numprocs, MPI_INTEGER, MPI_SUM, &
	1046	comm2d, ierr )
[2696]	1047	#else
[2897]	1048	num_buildings = num_buildings_l
[2696]	1049	#endif
	1050	!
[4648]	1051	!-- Gather all buildings ids on each PEs.
	1052	!-- First, allocate array encompassing all building ids in model domain.
[2897]	1053	ALLOCATE( build_ids(1:SUM(num_buildings)) )
[4648]	1054	#if defined( __parallel )
[2696]	1055	!
[4648]	1056	!-- Allocate array for displacements.
	1057	!-- As each PE may has a different number of buildings, so that the block sizes send by each
	1058	!-- PE may not be equal. Hence, information about the respective displacement is required,
	1059	!-- indicating the respective adress where each MPI-task writes into the receive buffer array.
[2897]	1060	ALLOCATE( displace_dum(0:numprocs-1) )
	1061	displace_dum(0) = 0
	1062	DO i = 1, numprocs-1
	1063	displace_dum(i) = displace_dum(i-1) + num_buildings(i-1)
	1064	ENDDO
[2696]	1065
[4648]	1066	CALL MPI_ALLGATHERV( build_ids_l(1:num_buildings_l(myid)), num_buildings(myid), &
	1067	MPI_INTEGER, build_ids, num_buildings, displace_dum, MPI_INTEGER, &
	1068	comm2d, ierr )
[2696]	1069
[2897]	1070	DEALLOCATE( displace_dum )
[2696]	1071
	1072	#else
[2897]	1073	build_ids = build_ids_l
[2696]	1074	#endif
	1075
	1076	!
[4648]	1077	!-- Note, in parallel mode building ids can occure mutliple times, as each PE has send its own
	1078	!-- ids. Therefore, sort out building ids which appear more than one time.
[2897]	1079	num_build = 0
	1080	DO nr = 1, SIZE(build_ids)
[2696]	1081
[2897]	1082	IF ( ALLOCATED(build_ids_final) ) THEN
[4144]	1083	IF ( ANY( build_ids(nr) == build_ids_final ) ) THEN
[2897]	1084	CYCLE
	1085	ELSE
	1086	num_build = num_build + 1
	1087	!
	1088	!-- Resize
	1089	ALLOCATE( build_ids_final_tmp(1:num_build) )
	1090	build_ids_final_tmp(1:num_build-1) = build_ids_final(1:num_build-1)
	1091	DEALLOCATE( build_ids_final )
	1092	ALLOCATE( build_ids_final(1:num_build) )
	1093	build_ids_final(1:num_build-1) = build_ids_final_tmp(1:num_build-1)
	1094	build_ids_final(num_build) = build_ids(nr)
	1095	DEALLOCATE( build_ids_final_tmp )
[4648]	1096	ENDIF
[2696]	1097	ELSE
	1098	num_build = num_build + 1
	1099	ALLOCATE( build_ids_final(1:num_build) )
	1100	build_ids_final(num_build) = build_ids(nr)
[2897]	1101	ENDIF
	1102	ENDDO
[2696]	1103
	1104	!
[4648]	1105	!-- Determine maximumum terrain height occupied by the respective building and temporalily
[4722]	1106	!-- store on oro_max. Before, check whether any buildings are defined within the domain.
	1107	IF ( ALLOCATED( build_ids_final ) ) THEN
	1108	dim_builds = SIZE(build_ids_final)
	1109	ELSE
	1110	dim_builds = 0
	1111	ENDIF
	1112
	1113	ALLOCATE( oro_max_l(1:dim_builds) )
	1114	ALLOCATE( oro_max(1:dim_builds) )
[2897]	1115	oro_max_l = 0.0_wp
[2696]	1116
[4722]	1117	DO nr = 1, dim_builds
[4648]	1118	oro_max_l(nr) = MAXVAL( MERGE( terrain_height_f%var(nys:nyn,nxl:nxr), &
	1119	0.0_wp, &
	1120	building_id_f%var(nys:nyn,nxl:nxr) == &
	1121	build_ids_final(nr) ) )
[2897]	1122	ENDDO
[4648]	1123
	1124	#if defined( __parallel )
[4722]	1125	IF ( dim_builds >= 1 ) THEN
[4648]	1126	CALL MPI_ALLREDUCE( oro_max_l, oro_max, SIZE( oro_max ), MPI_REAL, MPI_MAX, comm2d, &
	1127	ierr )
[2897]	1128	ENDIF
[2696]	1129	#else
[2897]	1130	oro_max = oro_max_l
[2696]	1131	#endif
[3051]	1132	!
[4648]	1133	!-- Finally, determine discrete grid height of maximum orography occupied by a building. Use
	1134	!-- all-or-nothing approach, i.e. if terrain exceeds the scalar level the grid box is fully
	1135	!-- terrain and the maximum terrain is set to the zw level.
	1136	!-- terrain or
[3051]	1137	oro_max_l = 0.0
[4722]	1138	DO nr = 1, dim_builds
[3051]	1139	DO k = nzb, nzt
[4648]	1140	IF ( zu(k) - ocean_offset <= oro_max(nr) ) oro_max_l(nr) = zw(k) - ocean_offset
[3051]	1141	ENDDO
[3142]	1142	oro_max(nr) = oro_max_l(nr)
[3051]	1143	ENDDO
[2897]	1144	ENDIF
[2696]	1145	!
[4245]	1146	!-- Allocate array for storing terrain height under buildings
	1147	IF ( buildings_f%from_file ) THEN
	1148	ALLOCATE( buildings_f%oro_max(nysg:nyng,nxlg:nxrg) )
	1149	buildings_f%oro_max = buildings_f%fill1
	1150	END IF
	1151	!
[4648]	1152	!-- Map orography as well as buildings onto grid.
[2696]	1153	DO i = nxl, nxr
	1154	DO j = nys, nyn
[2867]	1155	topo_top_index = 0
[3142]	1156	!
	1157	!-- Obtain index in global building_id array
	1158	IF ( buildings_f%from_file ) THEN
	1159	IF ( building_id_f%var(j,i) /= building_id_f%fill ) THEN
	1160	!
[4648]	1161	!-- Determine index where maximum terrain height occupied by the respective building
	1162	!-- height is stored.
	1163	nr = MINLOC( ABS( build_ids_final - building_id_f%var(j,i) ), DIM=1 )
[4245]	1164	!
	1165	!-- Save grid-indexed oro_max
	1166	buildings_f%oro_max(j,i) = oro_max(nr)
[3142]	1167	ENDIF
	1168	ENDIF
[2696]	1169	DO k = nzb, nzt
	1170	!
[4648]	1171	!-- In a first step, if grid point is below or equal the given terrain height, grid
	1172	!-- point is flagged to be of type natural.
	1173	!-- Please note, in case there is also a building which is lower than the vertical grid
	1174	!-- spacing, initialization of surface attributes will not be correct as given surface
	1175	!-- information will not be in accordance to the classified grid points.
[4159]	1176	!-- Hence, in this case, also a building flag.
[2747]	1177	IF ( zu(k) - ocean_offset <= terrain_height_f%var(j,i) ) THEN
[4189]	1178	topo_3d(k,j,i) = IBCLR( topo_3d(k,j,i), 0 )
	1179	topo_3d(k,j,i) = IBSET( topo_3d(k,j,i), 1 )
	1180	topo_top_index = k ! topo_top_index + 1
[2696]	1181	ENDIF
	1182	!
[4648]	1183	!-- Set building grid points. Here, only consider 2D buildings.
	1184	!-- 3D buildings require separate treatment.
[2897]	1185	IF ( buildings_f%from_file .AND. buildings_f%lod == 1 ) THEN
[4159]	1186	!
[4648]	1187	!-- Fill-up the terrain to the level of maximum orography within the building-covered
	1188	!-- area.
[4159]	1189	IF ( building_id_f%var(j,i) /= building_id_f%fill ) THEN
	1190	!
[4648]	1191	!-- Note, oro_max is always on zw level
[4159]	1192	IF ( zu(k) - ocean_offset < oro_max(nr) ) THEN
[2696]	1193	topo_3d(k,j,i) = IBCLR( topo_3d(k,j,i), 0 )
[4159]	1194	topo_3d(k,j,i) = IBSET( topo_3d(k,j,i), 1 )
[4648]	1195	ELSEIF ( zu(k) - ocean_offset <= oro_max(nr) + buildings_f%var_2d(j,i) ) THEN
[4159]	1196	topo_3d(k,j,i) = IBCLR( topo_3d(k,j,i), 0 )
[2696]	1197	topo_3d(k,j,i) = IBSET( topo_3d(k,j,i), 2 )
	1198	ENDIF
	1199	ENDIF
	1200	ENDIF
	1201	ENDDO
	1202	!
[4648]	1203	!-- Special treatment for non grid-resolved buildings. This case, the uppermost terrain
	1204	!-- grid point is flagged as building as well, even though no building exists at all.
	1205	!-- However, the surface element will be identified as urban-surface and the input data
	1206	!-- provided by the drivers is consistent to the surface classification. Else, all non
	1207	!-- grid-resolved buildings would vanish and identified as terrain grid points, which,
	1208	!-- however, won't be consistent with the input data.
[4159]	1209	IF ( buildings_f%from_file .AND. buildings_f%lod == 1 ) THEN
	1210	IF ( building_id_f%var(j,i) /= building_id_f%fill ) THEN
	1211	DO k = nzb, nzt
	1212	IF( zw(k) - ocean_offset == oro_max(nr) ) THEN
	1213	IF ( buildings_f%var_2d(j,i) <= zu(k+1) - zw(k) ) THEN
	1214	topo_3d(k,j,i) = IBSET( topo_3d(k,j,i), 2 )
	1215	ENDIF
	1216	ENDIF
	1217	ENDDO
	1218	ENDIF
	1219	ENDIF
	1220	!
[4648]	1221	!-- Map 3D buildings onto terrain height.
	1222	!-- In case of any slopes, map building on top of maximum terrain height covered by the
	1223	!-- building. In other words, extend building down to the respective local terrain-surface
	1224	!-- height.
[2897]	1225	IF ( buildings_f%from_file .AND. buildings_f%lod == 2 ) THEN
[2696]	1226	IF ( building_id_f%var(j,i) /= building_id_f%fill ) THEN
	1227	!
[4648]	1228	!-- Extend building down to the terrain surface, i.e. fill-up surface irregularities
	1229	!-- below a building. Note, oro_max is already a discrete height according to the
	1230	!-- all-or-nothing approach, i.e. grid box is either topography or atmosphere,
[3051]	1231	!-- terrain top is defined at upper bound of the grid box.
[4648]	1232	!-- Hence, check for zw in this case.
	1233	!-- Note, do this only for buildings which are surface mounted, i.e. building types
	1234	!-- 1-6. Below bridges, which are represented exclusively by building type 7, terrain
	1235	!-- shape should be maintained.
[3855]	1236	IF ( building_type_f%from_file ) THEN
	1237	IF ( building_type_f%var(j,i) /= 7 ) THEN
[4648]	1238	DO k = topo_top_index + 1, nzt + 1
[4159]	1239	IF ( zu(k) - ocean_offset <= oro_max(nr) ) THEN
[3855]	1240	topo_3d(k,j,i) = IBCLR( topo_3d(k,j,i), 0 )
[4159]	1241	topo_3d(k,j,i) = IBSET( topo_3d(k,j,i), 1 )
[3855]	1242	ENDIF
[4648]	1243	ENDDO
	1244	!
	1245	!-- After surface irregularities are smoothen, determine lower start index
	1246	!-- where building starts.
[3855]	1247	DO k = nzb, nzt
[4648]	1248	IF ( zu(k) - ocean_offset <= oro_max(nr) ) topo_top_index = k
[3855]	1249	ENDDO
	1250	ENDIF
[3115]	1251	ENDIF
[3051]	1252	!
	1253	!-- Finally, map building on top.
[2867]	1254	k2 = 0
	1255	DO k = topo_top_index, nzt + 1
[2796]	1256	IF ( k2 <= buildings_f%nz-1 ) THEN
[2696]	1257	IF ( buildings_f%var_3d(k2,j,i) == 1 ) THEN
	1258	topo_3d(k,j,i) = IBCLR( topo_3d(k,j,i), 0 )
	1259	topo_3d(k,j,i) = IBSET( topo_3d(k,j,i), 2 )
	1260	ENDIF
	1261	ENDIF
	1262	k2 = k2 + 1
	1263	ENDDO
	1264	ENDIF
	1265	ENDIF
	1266	ENDDO
	1267	ENDDO
	1268	!
[4648]	1269	!-- Horizontal exchange the oro_max array, which is required to for initialization of
	1270	!-- building-surface properties.
[4265]	1271	IF ( ALLOCATED( buildings_f%oro_max ) ) THEN
[4457]	1272	CALL exchange_horiz_2d( buildings_f%oro_max(:,:) )
[4265]	1273	ENDIF
[4245]	1274	!
[2696]	1275	!-- Deallocate temporary arrays required for processing and reading data
	1276	IF ( ALLOCATED( oro_max ) ) DEALLOCATE( oro_max )
	1277	IF ( ALLOCATED( oro_max_l ) ) DEALLOCATE( oro_max_l )
	1278	IF ( ALLOCATED( build_ids_final ) ) DEALLOCATE( build_ids_final )
	1279	!
[4648]	1280	!-- Topography input via ASCII format.
[2696]	1281	ELSE
[3294]	1282	ocean_offset = MERGE( zw(0), 0.0_wp, ocean_mode )
[4159]	1283	!
[4648]	1284	!-- Initialize topography bit 0 (indicates obstacle) everywhere to zero and clear all grid points
	1285	!-- at nzb, where alway a surface is defined.
	1286	!-- Further, set also bit 1 (indicates terrain) at nzb, which is further used for masked data
	1287	!-- output and further processing. Note, in the ASCII case no distinction is made between
	1288	!-- buildings and terrain, so that setting of bit 1 and 2 at the same time has no effect.
[2696]	1289	topo_3d = IBSET( topo_3d, 0 )
	1290	topo_3d(nzb,:,:) = IBCLR( topo_3d(nzb,:,:), 0 )
[4159]	1291	topo_3d(nzb,:,:) = IBSET( topo_3d(nzb,:,:), 1 )
[2696]	1292	DO i = nxl, nxr
	1293	DO j = nys, nyn
	1294	DO k = nzb, nzt
[3538]	1295	!
[4648]	1296	!-- Flag topography for all grid points which are below the local topography height.
	1297	!-- Note, each topography is flagged as building (bit 2) as well as terrain (bit 1) in
	1298	!-- order to employ urban-surface as well as land-surface model.
[2747]	1299	IF ( zu(k) - ocean_offset <= buildings_f%var_2d(j,i) ) THEN
[4189]	1300	topo_3d(k,j,i) = IBCLR( topo_3d(k,j,i), 0 )
[4630]	1301	topo_3d(k,j,i) = IBCLR( topo_3d(k,j,i), 1 )
	1302	topo_3d(k,j,i) = IBSET( topo_3d(k,j,i), 2 )
[2696]	1303	ENDIF
	1304	ENDDO
	1305	ENDDO
	1306	ENDDO
	1307	ENDIF
	1308
	1309	CALL exchange_horiz_int( topo_3d, nys, nyn, nxl, nxr, nzt, nbgp )
	1310
	1311	IF ( .NOT. bc_ns_cyc ) THEN
	1312	IF ( nys == 0 ) topo_3d(:,-1,:) = topo_3d(:,0,:)
	1313	IF ( nyn == ny ) topo_3d(:,ny+1,:) = topo_3d(:,ny,:)
	1314	ENDIF
	1315
	1316	IF ( .NOT. bc_lr_cyc ) THEN
	1317	IF ( nxl == 0 ) topo_3d(:,:,-1) = topo_3d(:,:,0)
[4648]	1318	IF ( nxr == nx ) topo_3d(:,:,nx+1) = topo_3d(:,:,nx)
[2696]	1319	ENDIF
	1320
	1321	END SUBROUTINE process_topography
	1322
	1323
	1324	! Description:
[4648]	1325	! -------------------------------------------------------------------------------------------------!
	1326	!> Filter topography, i.e. fill holes resolved by only one grid point.
	1327	!> Such holes are suspected to lead to velocity blow-ups as continuity equation on discrete grid
	1328	!> cannot be fulfilled in such case.
	1329	!--------------------------------------------------------------------------------------------------!
[2696]	1330	SUBROUTINE filter_topography( topo_3d )
	1331
[4648]	1332	USE control_parameters, &
[2696]	1333	ONLY: bc_lr_cyc, bc_ns_cyc, message_string
	1334
[4648]	1335	USE exchange_horiz_mod, &
[4457]	1336	ONLY: exchange_horiz_int, exchange_horiz_2d_byte, exchange_horiz_2d_int
	1337
[4648]	1338	USE indices, &
[2696]	1339	ONLY: nbgp, nx, nxl, nxlg, nxr, nxrg, ny, nyn, nyng, nys, nysg, nzb, nzt
	1340
[4648]	1341	USE netcdf_data_input_mod, &
	1342	ONLY: building_id_f, building_type_f
[2696]	1343
	1344	USE pegrid
	1345
	1346	IMPLICIT NONE
	1347
	1348	INTEGER(iwp) :: i !< running index along x-direction
	1349	INTEGER(iwp) :: j !< running index along y-direction
	1350	INTEGER(iwp) :: k !< running index along z-direction
[4648]	1351	INTEGER(iwp) :: num_hole !< number of holes (in topography) resolved by only one grid point
	1352	INTEGER(iwp) :: num_hole_l !< number of holes (in topography) resolved by only one grid point on local PE
[2696]	1353	INTEGER(iwp) :: num_wall !< number of surrounding vertical walls for a single grid point
	1354
[2955]	1355	INTEGER(iwp), DIMENSION(:,:,:), ALLOCATABLE :: topo_tmp !< temporary 3D-topography used to fill holes
[4648]	1356	INTEGER(iwp), DIMENSION(nzb:nzt+1,nysg:nyng,nxlg:nxrg) :: topo_3d !< 3D-topography array merging buildings and
	1357	!< orography
	1358
	1359	LOGICAL :: filled = .FALSE. !< flag indicating if holes were filled
	1360
[2696]	1361	!
[4648]	1362	!-- Before checking for holes, set lateral boundary conditions for
[2696]	1363	!-- topography. After hole-filling, boundary conditions must be set again.
[4648]	1364	!-- Several iterations are performed, in order to fill holes which might
[2696]	1365	!-- emerge by the filling-algorithm itself.
	1366	ALLOCATE( topo_tmp(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	1367	topo_tmp = 0
	1368
	1369	num_hole = 99999
[4648]	1370	DO WHILE ( num_hole > 0 )
[2696]	1371
[4648]	1372	num_hole = 0
[2696]	1373	CALL exchange_horiz_int( topo_3d, nys, nyn, nxl, nxr, nzt, nbgp )
[2955]	1374	!
[4648]	1375	!-- Exchange also building ID and type. Note, building_type is an one-byte variable.
	1376	IF ( building_id_f%from_file ) &
[2955]	1377	CALL exchange_horiz_2d_int( building_id_f%var, nys, nyn, nxl, nxr, nbgp )
[4648]	1378	IF ( building_type_f%from_file ) &
[3763]	1379	CALL exchange_horiz_2d_byte( building_type_f%var, nys, nyn, nxl, nxr, nbgp )
[2696]	1380
	1381	topo_tmp = topo_3d
	1382	!
[4648]	1383	!-- In case of non-cyclic lateral boundaries, assume lateral boundary to be a solid wall. Thus,
	1384	!-- intermediate spaces of one grid point between boundary and some topographic structure will be
	1385	!-- filled.
[2696]	1386	IF ( .NOT. bc_ns_cyc ) THEN
	1387	IF ( nys == 0 ) topo_tmp(:,-1,:) = IBCLR( topo_tmp(:,0,:), 0 )
	1388	IF ( nyn == ny ) topo_tmp(:,ny+1,:) = IBCLR( topo_tmp(:,ny,:), 0 )
	1389	ENDIF
	1390
	1391	IF ( .NOT. bc_lr_cyc ) THEN
	1392	IF ( nxl == 0 ) topo_tmp(:,:,-1) = IBCLR( topo_tmp(:,:,0), 0 )
[4648]	1393	IF ( nxr == nx ) topo_tmp(:,:,nx+1) = IBCLR( topo_tmp(:,:,nx), 0 )
[2696]	1394	ENDIF
	1395
	1396	num_hole_l = 0
	1397	DO i = nxl, nxr
	1398	DO j = nys, nyn
	1399	DO k = nzb+1, nzt
	1400	IF ( BTEST( topo_tmp(k,j,i), 0 ) ) THEN
	1401	num_wall = 0
[4648]	1402	IF ( .NOT. BTEST( topo_tmp(k,j-1,i), 0 ) ) num_wall = num_wall + 1
	1403	IF ( .NOT. BTEST( topo_tmp(k,j+1,i), 0 ) ) num_wall = num_wall + 1
	1404	IF ( .NOT. BTEST( topo_tmp(k,j,i-1), 0 ) ) num_wall = num_wall + 1
	1405	IF ( .NOT. BTEST( topo_tmp(k,j,i+1), 0 ) ) num_wall = num_wall + 1
	1406	IF ( .NOT. BTEST( topo_tmp(k-1,j,i), 0 ) ) num_wall = num_wall + 1
	1407	IF ( .NOT. BTEST( topo_tmp(k+1,j,i), 0 ) ) num_wall = num_wall + 1
[2696]	1408
	1409	IF ( num_wall >= 4 ) THEN
	1410	num_hole_l = num_hole_l + 1
	1411	!
[4648]	1412	!-- Clear flag 0 and set special flag ( bit 4) to indicate that new topography
	1413	!-- point is a result of filtering process.
[2696]	1414	topo_3d(k,j,i) = IBCLR( topo_3d(k,j,i), 0 )
[4314]	1415	topo_3d(k,j,i) = IBSET( topo_3d(k,j,i), 4 )
[2696]	1416	!
[4648]	1417	!-- If filled grid point is occupied by a building, classify it as building grid
	1418	!-- point.
[2696]	1419	IF ( building_type_f%from_file ) THEN
[4648]	1420	IF ( building_type_f%var(j,i) /= building_type_f%fill .OR. &
	1421	building_type_f%var(j+1,i) /= building_type_f%fill .OR. &
	1422	building_type_f%var(j-1,i) /= building_type_f%fill .OR. &
	1423	building_type_f%var(j,i+1) /= building_type_f%fill .OR. &
	1424	building_type_f%var(j,i-1) /= building_type_f%fill ) THEN
[2696]	1425	!
	1426	!-- Set flag indicating building surfaces
	1427	topo_3d(k,j,i) = IBSET( topo_3d(k,j,i), 2 )
	1428	!
[4648]	1429	!-- Set building_type and ID at this position if not already set. This is
	1430	!-- required for proper initialization of urban-surface energy balance
[2696]	1431	!-- solver.
[4648]	1432	IF ( building_type_f%var(j,i) == building_type_f%fill ) THEN
[2696]	1433
[4648]	1434	IF ( building_type_f%var(j+1,i) /= building_type_f%fill ) THEN
	1435	building_type_f%var(j,i) = building_type_f%var(j+1,i)
	1436	building_id_f%var(j,i) = building_id_f%var(j+1,i)
	1437	ELSEIF ( building_type_f%var(j-1,i) /= building_type_f%fill ) THEN
	1438	building_type_f%var(j,i) = building_type_f%var(j-1,i)
	1439	building_id_f%var(j,i) = building_id_f%var(j-1,i)
	1440	ELSEIF ( building_type_f%var(j,i+1) /= building_type_f%fill ) THEN
	1441	building_type_f%var(j,i) = building_type_f%var(j,i+1)
	1442	building_id_f%var(j,i) = building_id_f%var(j,i+1)
	1443	ELSEIF ( building_type_f%var(j,i-1) /= building_type_f%fill ) THEN
	1444	building_type_f%var(j,i) = building_type_f%var(j,i-1)
	1445	building_id_f%var(j,i) = building_id_f%var(j,i-1)
[2696]	1446	ENDIF
	1447	ENDIF
	1448	ENDIF
	1449	ENDIF
	1450	!
[4648]	1451	!-- If filled grid point is already classified as building everything is fine,
	1452	!-- else classify this grid point as natural type grid point. This case, values
	1453	!-- for the surface type are already set.
[2696]	1454	IF ( .NOT. BTEST( topo_3d(k,j,i), 2 ) ) THEN
	1455	topo_3d(k,j,i) = IBSET( topo_3d(k,j,i), 1 )
	1456	ENDIF
	1457	ENDIF
	1458	ENDIF
	1459	ENDDO
	1460	ENDDO
	1461	ENDDO
	1462	!
	1463	!-- Count the total number of holes, required for informative message.
	1464	#if defined( __parallel )
[4648]	1465	CALL MPI_ALLREDUCE( num_hole_l, num_hole, 1, MPI_INTEGER, MPI_SUM, comm2d, ierr )
[2696]	1466	#else
	1467	num_hole = num_hole_l
[4648]	1468	#endif
[2893]	1469	IF ( num_hole > 0 .AND. .NOT. filled ) filled = .TRUE.
[2696]	1470
[2893]	1471	ENDDO
[2696]	1472	!
[2893]	1473	!-- Create an informative message if any holes were filled.
	1474	IF ( filled ) THEN
[4648]	1475	WRITE( message_string, * ) 'Topography was filtered, i.e. holes ' // &
	1476	'resolved by only one grid point ' // &
[2893]	1477	'were filled during initialization.'
	1478	CALL message( 'init_grid', 'PA0430', 0, 0, 0, 6, 0 )
	1479	ENDIF
[2696]	1480
	1481	DEALLOCATE( topo_tmp )
	1482	!
[4648]	1483	!-- Finally, exchange topo_3d array again and if necessary set Neumann boundary condition in case of
	1484	!-- non-cyclic lateral boundaries.
[2696]	1485	CALL exchange_horiz_int( topo_3d, nys, nyn, nxl, nxr, nzt, nbgp )
	1486
	1487	IF ( .NOT. bc_ns_cyc ) THEN
	1488	IF ( nys == 0 ) topo_3d(:,-1,:) = topo_3d(:,0,:)
	1489	IF ( nyn == ny ) topo_3d(:,ny+1,:) = topo_3d(:,ny,:)
	1490	ENDIF
	1491
	1492	IF ( .NOT. bc_lr_cyc ) THEN
	1493	IF ( nxl == 0 ) topo_3d(:,:,-1) = topo_3d(:,:,0)
[4648]	1494	IF ( nxr == nx ) topo_3d(:,:,nx+1) = topo_3d(:,:,nx)
[2696]	1495	ENDIF
[2955]	1496	!
	1497	!-- Exchange building ID and type. Note, building_type is an one-byte variable.
[4648]	1498	IF ( building_id_f%from_file ) &
[2955]	1499	CALL exchange_horiz_2d_int( building_id_f%var, nys, nyn, nxl, nxr, nbgp )
[4648]	1500	IF ( building_type_f%from_file ) &
[3763]	1501	CALL exchange_horiz_2d_byte( building_type_f%var, nys, nyn, nxl, nxr, nbgp )
[2696]	1502
	1503	END SUBROUTINE filter_topography
	1504
	1505
	1506	! Description:
[4648]	1507	! -------------------------------------------------------------------------------------------------!
	1508	!> Reads topography information from file or sets generic topography. Moreover, all
	1509	!> topography-relevant topography arrays are initialized, and grid flags are set.
	1510	!--------------------------------------------------------------------------------------------------!
[2696]	1511	SUBROUTINE init_topo( topo )
	1512
[4648]	1513	USE arrays_3d, &
[2696]	1514	ONLY: zw
[4648]	1515
	1516	USE control_parameters, &
	1517	ONLY: bc_lr_cyc, bc_ns_cyc, building_height, building_length_x, building_length_y, &
	1518	building_wall_left, building_wall_south, canyon_height, canyon_wall_left, &
	1519	canyon_wall_south, canyon_width_x, canyon_width_y, dp_level_ind_b, dz, &
	1520	message_string, topography, topography_grid_convention, tunnel_height, &
	1521	tunnel_length, tunnel_width_x, tunnel_width_y, tunnel_wall_depth
	1522
	1523	USE exchange_horiz_mod, &
[4457]	1524	ONLY: exchange_horiz_int
	1525
[4648]	1526	USE grid_variables, &
[2696]	1527	ONLY: dx, dy
[4648]	1528
	1529	USE indices, &
	1530	ONLY: nbgp, nx, nxl, nxlg, nxr, nxrg, ny, nyn, nyng, nys, nysg, nz, nzb, nzt
	1531
[2696]	1532	USE kinds
	1533
[4648]	1534	USE netcdf_data_input_mod, &
	1535	ONLY: buildings_f, terrain_height_f
	1536
[2696]	1537	USE pegrid
	1538
	1539	IMPLICIT NONE
	1540
[4386]	1541	INTEGER(iwp) :: bh !< temporary vertical index of building height
[4648]	1542	INTEGER(iwp) :: ch !< temporary vertical index for canyon height
	1543	INTEGER(iwp) :: hv_in !< heavyside function to model inner tunnel surface
	1544	INTEGER(iwp) :: i !< index variable along x
[4386]	1545	INTEGER(iwp) :: index_left_bwall !< index for left building wall
[4648]	1546	INTEGER(iwp) :: index_north_bwall !< index for north building wall
[4386]	1547	INTEGER(iwp) :: index_right_bwall !< index for right building wall
	1548	INTEGER(iwp) :: index_south_bwall !< index for south building wall
	1549	INTEGER(iwp) :: index_left_cwall !< index for left canyon wall
[4648]	1550	INTEGER(iwp) :: index_north_cwall !< index for north canyon wall
[4386]	1551	INTEGER(iwp) :: index_right_cwall !< index for right canyon wall
	1552	INTEGER(iwp) :: index_south_cwall !< index for south canyon wall
	1553	INTEGER(iwp) :: j !< index variable along y
	1554	INTEGER(iwp) :: k !< index variable along z
[4648]	1555	INTEGER(iwp) :: ngp_bx !< grid point number of building size along x
	1556	INTEGER(iwp) :: ngp_by !< grid point number of building size along y
	1557	INTEGER(iwp) :: ngp_cx !< grid point number of canyon size along x
	1558	INTEGER(iwp) :: ngp_cy !< grid point number of canyon size along y
	1559	INTEGER(iwp) :: hv_out !< heavyside function to model outer tunnel surface
	1560	INTEGER(iwp) :: td !< tunnel wall depth
	1561	INTEGER(iwp) :: th !< height of outer tunnel wall
	1562	INTEGER(iwp) :: txe_in !< end position of inner tunnel wall in x
[4386]	1563	INTEGER(iwp) :: txe_out !< end position of outer tunnel wall in x
[4648]	1564	INTEGER(iwp) :: txs_in !< start position of inner tunnel wall in x
[4386]	1565	INTEGER(iwp) :: txs_out !< start position of outer tunnel wall in x
[4648]	1566	INTEGER(iwp) :: tye_in !< end position of inner tunnel wall in y
[4386]	1567	INTEGER(iwp) :: tye_out !< end position of outer tunnel wall in y
[4648]	1568	INTEGER(iwp) :: tys_in !< start position of inner tunnel wall in y
[4386]	1569	INTEGER(iwp) :: tys_out !< start position of outer tunnel wall in y
[2696]	1570
	1571	INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: nzb_local !< index for topography top at cell-center
[4648]	1572	INTEGER(iwp), DIMENSION(nzb:nzt+1,nysg:nyng,nxlg:nxrg) :: topo !< input array for 3D topography and dummy array for setting
	1573	!< "outer"-flags
[2696]	1574	!
[4648]	1575	!-- Check for correct setting of the namelist parameter topography. If topography information is
	1576	!-- read from file but topography = 'flat', initialization does not work properly.
	1577	IF ( ( buildings_f%from_file .OR. terrain_height_f%from_file ) .AND. &
[4189]	1578	TRIM( topography ) /= 'read_from_file' ) THEN
[4648]	1579	message_string = 'If topography information is provided (via ' // &
	1580	'Netcdf or ASCII input) topography = ' // &
[4189]	1581	'"read_from_file" is required.'
[4648]	1582	CALL message( 'init_grid', 'PA0437', 1, 2, 0, 6, 0 )
[4189]	1583	ENDIF
	1584	!
[1]	1585	!-- Set outer and inner index arrays for non-flat topography.
[4648]	1586	!-- Here consistency checks concerning domain size and periodicity are necessary.
	1587	!-- Within this SELECT CASE structure only nzb_local is initialized individually depending on the
	1588	!-- chosen topography type, all other index arrays are initialized further below.
[1]	1589	SELECT CASE ( TRIM( topography ) )
	1590
	1591	CASE ( 'flat' )
[4648]	1592	!
[2232]	1593	!-- Initialilize 3D topography array, used later for initializing flags
[4340]	1594	topo(nzb+1:nzt+1,:,:) = IBSET( topo(nzb+1:nzt+1,:,:), 0 )
[4648]	1595
[4340]	1596	CASE ( 'closed_channel' )
[4648]	1597	!
[4340]	1598	!-- Initialilize 3D topography array, used later for initializing flags
[4648]	1599	topo(nzb+1:nzt,:,:) = IBSET( topo(nzb+1:nzt,:,:), 0 )
[1]	1600
	1601	CASE ( 'single_building' )
	1602	!
	1603	!-- Single rectangular building, by default centered in the middle of the
	1604	!-- total domain
[4386]	1605	ngp_bx = NINT( building_length_x / dx )
	1606	ngp_by = NINT( building_length_y / dy )
[2232]	1607	bh = MINLOC( ABS( zw - building_height ), 1 ) - 1
[4648]	1608	IF ( ABS( zw(bh) - building_height ) == ABS( zw(bh+1) - building_height ) ) bh = bh + 1
[1322]	1609	IF ( building_wall_left == 9999999.9_wp ) THEN
[4386]	1610	building_wall_left = ( nx + 1 - ngp_bx ) / 2 * dx
[1]	1611	ENDIF
[4386]	1612	index_left_bwall = NINT( building_wall_left / dx )
	1613	index_right_bwall = index_left_bwall + ngp_bx
[1]	1614
[1322]	1615	IF ( building_wall_south == 9999999.9_wp ) THEN
[4386]	1616	building_wall_south = ( ny + 1 - ngp_by ) / 2 * dy
[1]	1617	ENDIF
[4386]	1618	index_south_bwall = NINT( building_wall_south / dy )
	1619	index_north_bwall = index_south_bwall + ngp_by
[1]	1620
	1621	!
	1622	!-- Building size has to meet some requirements
[4648]	1623	IF ( ( index_left_bwall < 1 ) .OR. ( index_right_bwall > nx-1 ) .OR. &
	1624	( index_right_bwall < index_left_bwall+3 ) .OR. &
	1625	( index_south_bwall < 1 ) .OR. ( index_north_bwall > ny-1 ) .OR. &
[4386]	1626	( index_north_bwall < index_south_bwall+3 ) ) THEN
[4648]	1627	WRITE( message_string, * ) 'inconsistent building parameters:', &
	1628	'&index_left_bwall=', index_left_bwall, &
	1629	'index_right_bwall=', index_right_bwall, &
	1630	'index_south_bwall=', index_south_bwall, &
	1631	'index_north_bwall=', index_north_bwall, &
[4386]	1632	'nx=', nx, 'ny=', ny
[254]	1633	CALL message( 'init_grid', 'PA0203', 1, 2, 0, 6, 0 )
[1]	1634	ENDIF
	1635
[2696]	1636	ALLOCATE( nzb_local(nysg:nyng,nxlg:nxrg) )
[2892]	1637	nzb_local = 0
[1]	1638	!
[4648]	1639	!-- Define the building.
	1640	IF ( index_left_bwall <= nxr .AND. index_right_bwall >= nxl .AND. &
	1641	index_south_bwall <= nyn .AND. index_north_bwall >= nys ) &
	1642	nzb_local(MAX(nys,index_south_bwall):MIN(nyn,index_north_bwall), &
[4386]	1643	MAX(nxl,index_left_bwall):MIN(nxr,index_right_bwall)) = bh
[2232]	1644	!
[2696]	1645	!-- Set bit array on basis of nzb_local
	1646	DO i = nxl, nxr
	1647	DO j = nys, nyn
[4648]	1648	topo(nzb_local(j,i)+1:nzt+1,j,i) = IBSET( topo(nzb_local(j,i)+1:nzt+1,j,i), 0 )
[2232]	1649	ENDDO
	1650	ENDDO
[4648]	1651
[2696]	1652	DEALLOCATE( nzb_local )
[2232]	1653
[2696]	1654	CALL exchange_horiz_int( topo, nys, nyn, nxl, nxr, nzt, nbgp )
[2823]	1655	!
[4648]	1656	!-- Set boundary conditions also for flags. Can be interpreted as Neumannb oundary conditions
	1657	!-- for topography.
[2823]	1658	IF ( .NOT. bc_ns_cyc ) THEN
	1659	IF ( nys == 0 ) THEN
[4648]	1660	DO i = 1, nbgp
[2823]	1661	topo(:,nys-i,:) = topo(:,nys,:)
	1662	ENDDO
	1663	ENDIF
	1664	IF ( nyn == ny ) THEN
[4648]	1665	DO i = 1, nbgp
[2823]	1666	topo(:,nyn+i,:) = topo(:,nyn,:)
	1667	ENDDO
	1668	ENDIF
	1669	ENDIF
	1670	IF ( .NOT. bc_lr_cyc ) THEN
	1671	IF ( nxl == 0 ) THEN
[4648]	1672	DO i = 1, nbgp
[2823]	1673	topo(:,:,nxl-i) = topo(:,:,nxl)
	1674	ENDDO
	1675	ENDIF
[4648]	1676	IF ( nxr == nx ) THEN
	1677	DO i = 1, nbgp
	1678	topo(:,:,nxr+i) = topo(:,:,nxr)
[2823]	1679	ENDDO
[4648]	1680	ENDIF
[2823]	1681	ENDIF
[2232]	1682
[240]	1683	CASE ( 'single_street_canyon' )
	1684	!
	1685	!-- Single quasi-2D street canyon of infinite length in x or y direction.
	1686	!-- The canyon is centered in the other direction by default.
[1322]	1687	IF ( canyon_width_x /= 9999999.9_wp ) THEN
[240]	1688	!
	1689	!-- Street canyon in y direction
[4386]	1690	ngp_cx = NINT( canyon_width_x / dx )
[1322]	1691	IF ( canyon_wall_left == 9999999.9_wp ) THEN
[4386]	1692	canyon_wall_left = ( nx + 1 - ngp_cx ) / 2 * dx
[240]	1693	ENDIF
[4386]	1694	index_left_cwall= NINT( canyon_wall_left / dx )
	1695	index_right_cwall= index_left_cwall+ ngp_cx
[1322]	1696	ELSEIF ( canyon_width_y /= 9999999.9_wp ) THEN
[240]	1697	!
	1698	!-- Street canyon in x direction
[4386]	1699	ngp_cy = NINT( canyon_width_y / dy )
[1322]	1700	IF ( canyon_wall_south == 9999999.9_wp ) THEN
[4386]	1701	canyon_wall_south = ( ny + 1 - ngp_cy ) / 2 * dy
[240]	1702	ENDIF
[4386]	1703	index_south_cwall = NINT( canyon_wall_south / dy )
	1704	index_north_cwall = index_south_cwall + ngp_cy
[4648]	1705
[240]	1706	ELSE
[4648]	1707
[254]	1708	message_string = 'no street canyon width given'
	1709	CALL message( 'init_grid', 'PA0204', 1, 2, 0, 6, 0 )
[4648]	1710
[240]	1711	ENDIF
	1712
[2232]	1713	ch = MINLOC( ABS( zw - canyon_height ), 1 ) - 1
[4648]	1714	IF ( ABS( zw(ch) - canyon_height ) == ABS( zw(ch+1) - canyon_height ) ) ch = ch + 1
[240]	1715	dp_level_ind_b = ch
	1716	!
	1717	!-- Street canyon size has to meet some requirements
[1322]	1718	IF ( canyon_width_x /= 9999999.9_wp ) THEN
[4648]	1719	IF ( ( index_left_cwall< 1 ) .OR. ( index_right_cwall> nx-1 ) .OR. &
[4543]	1720	( ngp_cx < 3 ) ) THEN
[4648]	1721	WRITE( message_string, * ) 'inconsistent canyon parameters:', &
	1722	'&index_left_cwall=', index_left_cwall, &
	1723	' index_right_cwall=', index_right_cwall, &
	1724	' ngp_cx=', ngp_cx, ' ch=', ch, ' nx=', nx, ' ny=', ny
	1725	CALL message( 'init_grid', 'PA0205', 1, 2, 0, 6, 0 )
[240]	1726	ENDIF
[1322]	1727	ELSEIF ( canyon_width_y /= 9999999.9_wp ) THEN
[4648]	1728	IF ( ( index_south_cwall < 1 ) .OR. &
	1729	( index_north_cwall > ny-1 ) .OR. ( ngp_cy < 3 ) ) THEN
	1730	WRITE( message_string, * ) 'inconsistent canyon parameters:', &
	1731	'&index_south_cwall=', index_south_cwall, &
	1732	' index_north_cwall=', index_north_cwall, &
	1733	' ngp_cy=', ngp_cy, ' ch=', ch, ' nx=', nx, ' ny=', ny
	1734	CALL message( 'init_grid', 'PA0206', 1, 2, 0, 6, 0 )
[240]	1735	ENDIF
	1736	ENDIF
[4648]	1737	IF ( canyon_width_x /= 9999999.9_wp .AND. canyon_width_y /= 9999999.9_wp ) THEN
	1738	message_string = 'inconsistent canyon parameters:' // &
	1739	'&street canyon can only be oriented' // &
[3045]	1740	' either in x- or in y-direction'
[254]	1741	CALL message( 'init_grid', 'PA0207', 1, 2, 0, 6, 0 )
[240]	1742	ENDIF
	1743
[2696]	1744	ALLOCATE( nzb_local(nysg:nyng,nxlg:nxrg) )
[240]	1745	nzb_local = ch
[1322]	1746	IF ( canyon_width_x /= 9999999.9_wp ) THEN
[4648]	1747	IF ( index_left_cwall<= nxr .AND. index_right_cwall>= nxl ) &
[4386]	1748	nzb_local(:,MAX(nxl,index_left_cwall+1):MIN(nxr,index_right_cwall-1)) = 0
[1322]	1749	ELSEIF ( canyon_width_y /= 9999999.9_wp ) THEN
[4648]	1750	IF ( index_south_cwall <= nyn .AND. index_north_cwall >= nys ) &
[4386]	1751	nzb_local(MAX(nys,index_south_cwall+1):MIN(nyn,index_north_cwall-1),:) = 0
[240]	1752	ENDIF
[2232]	1753	!
[2696]	1754	!-- Set bit array on basis of nzb_local
	1755	DO i = nxl, nxr
	1756	DO j = nys, nyn
[4648]	1757	topo(nzb_local(j,i)+1:nzt+1,j,i) = IBSET( topo(nzb_local(j,i)+1:nzt+1,j,i), 0 )
[2232]	1758	ENDDO
	1759	ENDDO
[2696]	1760	DEALLOCATE( nzb_local )
[1994]	1761
[2696]	1762	CALL exchange_horiz_int( topo, nys, nyn, nxl, nxr, nzt, nbgp )
[2823]	1763	!
[4648]	1764	!-- Set boundary conditions also for flags. Can be interpreted as Neumann boundary conditions
	1765	!-- for topography.
[2823]	1766	IF ( .NOT. bc_ns_cyc ) THEN
	1767	IF ( nys == 0 ) THEN
[4648]	1768	DO i = 1, nbgp
	1769	topo(:,nys-i,:) = topo(:,nys,:)
[2823]	1770	ENDDO
	1771	ENDIF
	1772	IF ( nyn == ny ) THEN
[4648]	1773	DO i = 1, nbgp
[2823]	1774	topo(:,nyn+i,:) = topo(:,nyn,:)
	1775	ENDDO
	1776	ENDIF
	1777	ENDIF
	1778	IF ( .NOT. bc_lr_cyc ) THEN
	1779	IF ( nxl == 0 ) THEN
[4648]	1780	DO i = 1, nbgp
	1781	topo(:,:,nxl-i) = topo(:,:,nxl)
[2823]	1782	ENDDO
	1783	ENDIF
[4648]	1784	IF ( nxr == nx ) THEN
	1785	DO i = 1, nbgp
	1786	topo(:,:,nxr+i) = topo(:,:,nxr)
[2823]	1787	ENDDO
[4648]	1788	ENDIF
[2823]	1789	ENDIF
[2232]	1790
	1791	CASE ( 'tunnel' )
	1792
	1793	!
	1794	!-- Tunnel height
	1795	IF ( tunnel_height == 9999999.9_wp ) THEN
	1796	th = zw( INT( 0.2 * nz) )
	1797	ELSE
	1798	th = tunnel_height
	1799	ENDIF
	1800	!
	1801	!-- Tunnel-wall depth
[4648]	1802	IF ( tunnel_wall_depth == 9999999.9_wp ) THEN
[3065]	1803	td = MAX ( dx, dy, dz(1) )
[2232]	1804	ELSE
	1805	td = tunnel_wall_depth
	1806	ENDIF
	1807	!
	1808	!-- Check for tunnel width
[4648]	1809	IF ( tunnel_width_x == 9999999.9_wp .AND. tunnel_width_y == 9999999.9_wp ) THEN
[2232]	1810	message_string = 'No tunnel width is given. '
[2274]	1811	CALL message( 'init_grid', 'PA0280', 1, 2, 0, 6, 0 )
[2232]	1812	ENDIF
[4648]	1813	IF ( tunnel_width_x /= 9999999.9_wp .AND. tunnel_width_y /= 9999999.9_wp ) THEN
	1814	message_string = 'Inconsistent tunnel parameters:' // &
	1815	'tunnel can only be oriented' // &
[2232]	1816	'either in x- or in y-direction.'
[2274]	1817	CALL message( 'init_grid', 'PA0281', 1, 2, 0, 6, 0 )
[2232]	1818	ENDIF
	1819	!
[4356]	1820	!-- Check for too small tunnel width in x- and y-direction
[4648]	1821	IF ( tunnel_width_x /= 9999999.9_wp .AND. &
[4356]	1822	tunnel_width_x - 2.0_wp * td <= 2.0_wp * dx ) THEN
	1823	message_string = 'tunnel_width_x too small'
	1824	CALL message( 'init_grid', 'PA0175', 1, 2, 0, 6, 0 )
	1825	ENDIF
[4648]	1826	IF ( tunnel_width_y /= 9999999.9_wp .AND. &
[4356]	1827	tunnel_width_y - 2.0_wp * td <= 2.0_wp * dy ) THEN
	1828	message_string = 'tunnel_width_y too small'
	1829	CALL message( 'init_grid', 'PA0455', 1, 2, 0, 6, 0 )
	1830	ENDIF
	1831	!
[4648]	1832	!-- Check for too large tunnel width.
[4356]	1833	!-- Tunnel axis along y.
[2232]	1834	IF ( tunnel_width_x /= 9999999.9_wp ) THEN
	1835	IF ( tunnel_width_x > ( nx + 1 ) * dx ) THEN
[4356]	1836	message_string = 'tunnel_width_x too large'
[2274]	1837	CALL message( 'init_grid', 'PA0282', 1, 2, 0, 6, 0 )
[2232]	1838	ENDIF
	1839
	1840	txs_out = INT( ( nx + 1 ) * 0.5_wp * dx - tunnel_width_x * 0.5_wp )
	1841	txe_out = INT( ( nx + 1 ) * 0.5_wp * dx + tunnel_width_x * 0.5_wp )
[4648]	1842	txs_in = INT( ( nx + 1 ) * 0.5_wp * dx - ( tunnel_width_x * 0.5_wp - td ) )
	1843	txe_in = INT( ( nx + 1 ) * 0.5_wp * dx + ( tunnel_width_x * 0.5_wp - td ) )
[2232]	1844
	1845	tys_out = INT( ( ny + 1 ) * 0.5_wp * dy - tunnel_length * 0.5_wp )
	1846	tye_out = INT( ( ny + 1 ) * 0.5_wp * dy + tunnel_length * 0.5_wp )
	1847	tys_in = tys_out
	1848	tye_in = tye_out
	1849	ENDIF
	1850	!
[4356]	1851	!-- Tunnel axis along x.
[2232]	1852	IF ( tunnel_width_y /= 9999999.9_wp ) THEN
	1853	IF ( tunnel_width_y > ( ny + 1 ) * dy ) THEN
[4356]	1854	message_string = 'tunnel_width_y too large'
[2274]	1855	CALL message( 'init_grid', 'PA0456', 1, 2, 0, 6, 0 )
[2232]	1856	ENDIF
	1857
	1858	txs_out = INT( ( nx + 1 ) * 0.5_wp * dx - tunnel_length * 0.5_wp )
	1859	txe_out = INT( ( nx + 1 ) * 0.5_wp * dx + tunnel_length * 0.5_wp )
	1860	txs_in = txs_out
	1861	txe_in = txe_out
	1862
	1863	tys_out = INT( ( ny + 1 ) * 0.5_wp * dy - tunnel_width_y * 0.5_wp )
	1864	tye_out = INT( ( ny + 1 ) * 0.5_wp * dy + tunnel_width_y * 0.5_wp )
[4648]	1865	tys_in = INT( ( ny + 1 ) * 0.5_wp * dy - ( tunnel_width_y * 0.5_wp - td ) )
	1866	tye_in = INT( ( ny + 1 ) * 0.5_wp * dy + ( tunnel_width_y * 0.5_wp - td ) )
[2232]	1867	ENDIF
	1868
[2696]	1869	topo = 0
[2232]	1870	DO i = nxl, nxr
	1871	DO j = nys, nyn
	1872	!
	1873	!-- Use heaviside function to model outer tunnel surface
[4648]	1874	hv_out = th * 0.5_wp * ( ( SIGN( 1.0_wp, i * dx - txs_out ) + 1.0_wp ) &
	1875	- ( SIGN( 1.0_wp, i * dx - txe_out ) + 1.0_wp ) )
[2232]	1876
[4648]	1877	hv_out = hv_out * 0.5_wp * ( ( SIGN( 1.0_wp, j * dy - tys_out ) + 1.0_wp ) &
	1878	- ( SIGN( 1.0_wp, j * dy - tye_out ) + 1.0_wp ) )
	1879	!
[2232]	1880	!-- Use heaviside function to model inner tunnel surface
[4648]	1881	hv_in = ( th - td ) * 0.5_wp * ( ( SIGN( 1.0_wp, i * dx - txs_in ) + 1.0_wp ) &
	1882	- ( SIGN( 1.0_wp, i * dx - txe_in ) + 1.0_wp ) )
[2232]	1883
[4648]	1884	hv_in = hv_in * 0.5_wp * ( ( SIGN( 1.0_wp, j * dy - tys_in ) + 1.0_wp ) &
	1885	- ( SIGN( 1.0_wp, j * dy - tye_in ) + 1.0_wp ) )
[2232]	1886	!
	1887	!-- Set flags at x-y-positions without any tunnel surface
	1888	IF ( hv_out - hv_in == 0.0_wp ) THEN
[2696]	1889	topo(nzb+1:nzt+1,j,i) = IBSET( topo(nzb+1:nzt+1,j,i), 0 )
[2232]	1890	!
	1891	!-- Set flags at x-y-positions with tunnel surfaces
	1892	ELSE
	1893	DO k = nzb + 1, nzt + 1
	1894	!
	1895	!-- Inner tunnel
	1896	IF ( hv_out - hv_in == th ) THEN
	1897	IF ( zw(k) <= hv_out ) THEN
[2696]	1898	topo(k,j,i) = IBCLR( topo(k,j,i), 0 )
[2232]	1899	ELSE
[2696]	1900	topo(k,j,i) = IBSET( topo(k,j,i), 0 )
[2232]	1901	ENDIF
	1902	ENDIF
	1903	!
	1904	!-- Lateral tunnel walls
	1905	IF ( hv_out - hv_in == td ) THEN
[4648]	1906	IF ( zw(k) <= hv_in ) THEN
[2696]	1907	topo(k,j,i) = IBSET( topo(k,j,i), 0 )
[4648]	1908	ELSEIF ( zw(k) > hv_in .AND. zw(k) <= hv_out ) THEN
[2696]	1909	topo(k,j,i) = IBCLR( topo(k,j,i), 0 )
[4648]	1910	ELSEIF ( zw(k) > hv_out ) THEN
[2696]	1911	topo(k,j,i) = IBSET( topo(k,j,i), 0 )
[2232]	1912	ENDIF
	1913	ENDIF
	1914	ENDDO
	1915	ENDIF
	1916	ENDDO
	1917	ENDDO
	1918
[2696]	1919	CALL exchange_horiz_int( topo, nys, nyn, nxl, nxr, nzt, nbgp )
[2823]	1920	!
[4648]	1921	!-- Set boundary conditions also for flags. Can be interpreted as Neumann boundary conditions
	1922	!-- for topography.
[2823]	1923	IF ( .NOT. bc_ns_cyc ) THEN
	1924	IF ( nys == 0 ) THEN
[4648]	1925	DO i = 1, nbgp
	1926	topo(:,nys-i,:) = topo(:,nys,:)
[2823]	1927	ENDDO
	1928	ENDIF
	1929	IF ( nyn == ny ) THEN
[4648]	1930	DO i = 1, nbgp
[2823]	1931	topo(:,nyn+i,:) = topo(:,nyn,:)
	1932	ENDDO
	1933	ENDIF
	1934	ENDIF
	1935	IF ( .NOT. bc_lr_cyc ) THEN
	1936	IF ( nxl == 0 ) THEN
[4648]	1937	DO i = 1, nbgp
	1938	topo(:,:,nxl-i) = topo(:,:,nxl)
[2823]	1939	ENDDO
	1940	ENDIF
[4648]	1941	IF ( nxr == nx ) THEN
	1942	DO i = 1, nbgp
	1943	topo(:,:,nxr+i) = topo(:,:,nxr)
[2823]	1944	ENDDO
[4648]	1945	ENDIF
[2823]	1946	ENDIF
[2232]	1947
[1]	1948	CASE ( 'read_from_file' )
	1949	!
[4648]	1950	!-- Note, topography information have been already read.
	1951	!-- If required, further process topography, i.e. reference buildings on top of orography and
	1952	!-- set temporary 3D topography array, which is used later to set grid flags. Calling of this
	1953	!-- rouinte is also required in case of ASCII input, even though no distinction between
	1954	!-- terrain- and building height is made in this case.
[2696]	1955	CALL process_topography( topo )
[1968]	1956	!
[2696]	1957	!-- Filter holes resolved by only one grid-point
	1958	CALL filter_topography( topo )
[1968]	1959	!
[4648]	1960	!-- Exchange ghost-points, as well as add cyclic or Neumann boundary conditions.
[2696]	1961	CALL exchange_horiz_int( topo, nys, nyn, nxl, nxr, nzt, nbgp )
[2232]	1962	!
[4314]	1963	!-- Set lateral boundary conditions for topography on all ghost layers
[1968]	1964	IF ( .NOT. bc_ns_cyc ) THEN
[2550]	1965	IF ( nys == 0 ) THEN
[4648]	1966	DO i = 1, nbgp
[2696]	1967	topo(:,nys-i,:) = topo(:,nys,:)
	1968	ENDDO
[2550]	1969	ENDIF
[2696]	1970	IF ( nyn == ny ) THEN
[4648]	1971	DO i = 1, nbgp
[2696]	1972	topo(:,nyn+i,:) = topo(:,nyn,:)
	1973	ENDDO
	1974	ENDIF
[1942]	1975	ENDIF
[1910]	1976
[1968]	1977	IF ( .NOT. bc_lr_cyc ) THEN
[2550]	1978	IF ( nxl == 0 ) THEN
[4648]	1979	DO i = 1, nbgp
[2696]	1980	topo(:,:,nxl-i) = topo(:,:,nxl)
[2232]	1981	ENDDO
[2696]	1982	ENDIF
	1983	IF ( nxr == nx ) THEN
[4648]	1984	DO i = 1, nbgp
[2696]	1985	topo(:,:,nxr+i) = topo(:,:,nxr)
	1986	ENDDO
	1987	ENDIF
[2232]	1988	ENDIF
	1989
[667]	1990
[1]	1991	CASE DEFAULT
[4648]	1992	!
	1993	!-- The DEFAULT case is reached either if the parameter topography contains a wrong character
	1994	!-- string or if the user has defined a special case in the user interface. There, the
	1995	!-- subroutine user_init_grid checks which of these two conditions applies.
[2696]	1996	CALL user_init_grid( topo )
	1997	CALL filter_topography( topo )
[1]	1998
	1999	END SELECT
	2000	!
[4648]	2001	!-- Consistency checks and index array initialization are only required for non-flat topography.
[1]	2002	IF ( TRIM( topography ) /= 'flat' ) THEN
	2003	!
[4648]	2004	!-- In case of non-flat topography, check whether the convention how to define the topography
	2005	!-- grid has been set correctly, or whether the default is applicable. If this is not possible,
	2006	!-- abort.
[2232]	2007	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
[4648]	2008	IF ( TRIM( topography ) /= 'closed_channel' .AND. &
	2009	TRIM( topography ) /= 'single_building' .AND. &
	2010	TRIM( topography ) /= 'single_street_canyon' .AND. &
	2011	TRIM( topography ) /= 'tunnel' .AND. &
[2232]	2012	TRIM( topography ) /= 'read_from_file') THEN
[4648]	2013	!-- The default value is not applicable here, because it is only valid for the four
	2014	!-- standard cases 'single_building', 'single_street_canyon', 'tunnel' and 'read_from_file'
[2232]	2015	!-- defined in init_grid.
[4648]	2016	WRITE( message_string, * ) 'The value for "topography_grid_convention" ', &
	2017	'is not set. Its default value is & only valid for ', &
	2018	'"topography" = ''single_building'', ''tunnel'' ', &
	2019	'''single_street_canyon'', ''closed_channel'' & or ', &
	2020	'''read_from_file''.', &
	2021	'& Choose ''cell_edge'' or ''cell_center''.'
[2232]	2022	CALL message( 'init_grid', 'PA0239', 1, 2, 0, 6, 0 )
	2023	ELSE
	2024	!-- The default value is applicable here.
	2025	!-- Set convention according to topography.
[4648]	2026	IF ( TRIM( topography ) == 'single_building' .OR. &
[2232]	2027	TRIM( topography ) == 'single_street_canyon' ) THEN
	2028	topography_grid_convention = 'cell_edge'
[4648]	2029	ELSEIF ( TRIM( topography ) == 'read_from_file' .OR. &
[2232]	2030	TRIM( topography ) == 'tunnel') THEN
	2031	topography_grid_convention = 'cell_center'
	2032	ENDIF
	2033	ENDIF
[4648]	2034	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
[2232]	2035	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
[4648]	2036	WRITE( message_string, * ) 'The value for "topography_grid_convention" is ', &
	2037	'not recognized.& Choose ''cell_edge'' or ''cell_center''.'
[2232]	2038	CALL message( 'init_grid', 'PA0240', 1, 2, 0, 6, 0 )
	2039	ENDIF
[1]	2040
[2169]	2041
[217]	2042	IF ( topography_grid_convention == 'cell_edge' ) THEN
[4648]	2043	!
	2044	!-- The array nzb_local as defined using the 'cell_edge' convention
	2045	!-- describes the actual total size of topography which is defined at the
	2046	!-- cell edges where u=0 on the topography walls in x-direction and v=0
[217]	2047	!-- on the topography walls in y-direction. However, PALM uses individual
	2048	!-- arrays nzb_u\|v\|w\|s_inner\|outer that are based on nzb_s_inner.
[4648]	2049	!-- Therefore, the extent of topography in nzb_local is now reduced by
	2050	!-- 1dx at the E topography walls and by 1dy at the N topography walls
	2051	!-- to form the basis for nzb_s_inner.
[1968]	2052	!-- Note, the reverse memory access (i-j instead of j-i) is absolutely
	2053	!-- required at this point.
	2054	DO j = nys+1, nyn+1
	2055	DO i = nxl-1, nxr
[2232]	2056	DO k = nzb, nzt+1
[4648]	2057	IF ( BTEST( topo(k,j,i), 0 ) .OR. BTEST( topo(k,j,i+1), 0 ) ) &
[2696]	2058	topo(k,j,i) = IBSET( topo(k,j,i), 0 )
[2232]	2059	ENDDO
	2060	ENDDO
[4648]	2061	ENDDO
[2696]	2062	CALL exchange_horiz_int( topo, nys, nyn, nxl, nxr, nzt, nbgp )
[2232]	2063
	2064	DO i = nxl, nxr+1
	2065	DO j = nys-1, nyn
	2066	DO k = nzb, nzt+1
[4648]	2067	IF ( BTEST( topo(k,j,i), 0 ) .OR. BTEST( topo(k,j+1,i), 0 ) ) &
[2696]	2068	topo(k,j,i) = IBSET( topo(k,j,i), 0 )
[2232]	2069	ENDDO
	2070	ENDDO
[4648]	2071	ENDDO
[2696]	2072	CALL exchange_horiz_int( topo, nys, nyn, nxl, nxr, nzt, nbgp )
[4648]	2073
[217]	2074	ENDIF
[2696]	2075	ENDIF
[2232]	2076
[1]	2077
[2696]	2078	END SUBROUTINE init_topo
[1]	2079
[2696]	2080	SUBROUTINE set_topo_flags(topo)
[1]	2081
[4648]	2082	USE control_parameters, &
	2083	ONLY: bc_lr_cyc, bc_ns_cyc, constant_flux_layer, scalar_advec, topography, &
	2084	use_surface_fluxes, use_top_fluxes
[1]	2085
[4648]	2086	USE exchange_horiz_mod, &
[4457]	2087	ONLY: exchange_horiz_int
	2088
[4648]	2089	USE indices, &
	2090	ONLY: nbgp, nx, nxl, nxlg, nxr, nxrg, ny, nyn, nyng, nys, nysg, nzb, nzt, topo_top_ind, &
	2091	wall_flags_static_0, wall_flags_total_0
[1]	2092
[2696]	2093	USE kinds
[1]	2094
[2696]	2095	IMPLICIT NONE
[1804]	2096
[2696]	2097	INTEGER(iwp) :: i !< index variable along x
[4168]	2098	INTEGER(iwp) :: ibit !< integer bit position of topgraphy masking array
[2696]	2099	INTEGER(iwp) :: j !< index variable along y
	2100	INTEGER(iwp) :: k !< index variable along z
[1]	2101
[4648]	2102	INTEGER(iwp), DIMENSION(nzb:nzt+1,nysg:nyng,nxlg:nxrg) :: topo !< input array for 3D topography and dummy array for setting
	2103	!< "outer"-flags
[2232]	2104
[4329]	2105	ALLOCATE( wall_flags_static_0(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	2106	wall_flags_static_0 = 0
[2232]	2107	!
[2696]	2108	!-- Set-up topography flags. First, set flags only for s, u, v and w-grid.
[4648]	2109	!-- Further special flags will be set in following loops.
[2232]	2110	DO i = nxl, nxr
	2111	DO j = nys, nyn
	2112	DO k = nzb, nzt+1
	2113	!
	2114	!-- scalar grid
[4648]	2115	IF ( BTEST( topo(k,j,i), 0 ) ) &
[4329]	2116	wall_flags_static_0(k,j,i) = IBSET( wall_flags_static_0(k,j,i), 0 )
[2232]	2117	!
[2696]	2118	!-- u grid
[4648]	2119	IF ( BTEST( topo(k,j,i), 0 ) .AND. BTEST( topo(k,j,i-1), 0 ) ) &
[4329]	2120	wall_flags_static_0(k,j,i) = IBSET( wall_flags_static_0(k,j,i), 1 )
[2696]	2121	!
[2232]	2122	!-- v grid
[4648]	2123	IF ( BTEST( topo(k,j,i), 0 ) .AND. BTEST( topo(k,j-1,i), 0 ) ) &
[4329]	2124	wall_flags_static_0(k,j,i) = IBSET( wall_flags_static_0(k,j,i), 2 )
[2696]	2125
[2232]	2126	ENDDO
[1]	2127
[2232]	2128	DO k = nzb, nzt
[1]	2129	!
[2232]	2130	!-- w grid
[4648]	2131	IF ( BTEST( topo(k,j,i), 0 ) .AND. BTEST( topo(k+1,j,i), 0 ) ) &
[4329]	2132	wall_flags_static_0(k,j,i) = IBSET( wall_flags_static_0(k,j,i), 3 )
[2232]	2133	ENDDO
[4648]	2134
	2135	IF ( topography /= 'closed_channel' ) THEN
[4340]	2136	wall_flags_static_0(nzt+1,j,i) = IBSET( wall_flags_static_0(nzt+1,j,i), 3 )
	2137	ENDIF
[2232]	2138
	2139	ENDDO
	2140	ENDDO
[2696]	2141
[4329]	2142	CALL exchange_horiz_int( wall_flags_static_0, nys, nyn, nxl, nxr, nzt, nbgp )
[4346]	2143
[1]	2144	!
[4648]	2145	!-- Set outer array for scalars to mask near-surface grid points. Note, on basis of flag 24 futher
	2146	!-- flags will be derived which are used to control production of subgrid TKE production near walls.
	2147
[4346]	2148	ALLOCATE( wall_flags_total_0(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	2149	wall_flags_total_0 = 0
[4648]	2150
[2696]	2151	DO i = nxl, nxr
	2152	DO j = nys, nyn
[2232]	2153	DO k = nzb, nzt+1
[4346]	2154	wall_flags_total_0(k,j,i) = IOR( wall_flags_total_0(k,j,i), wall_flags_static_0(k,j,i) )
[2232]	2155	ENDDO
	2156	ENDDO
	2157	ENDDO
[4648]	2158
[4346]	2159	CALL exchange_horiz_int( wall_flags_total_0, nys, nyn, nxl, nxr, nzt, nbgp )
[4648]	2160
[4346]	2161	DO i = nxl, nxr
	2162	DO j = nys, nyn
	2163	DO k = nzb, nzt+1
[4648]	2164	IF ( BTEST( wall_flags_total_0(k,j-1,i), 0 ) .AND. &
	2165	BTEST( wall_flags_total_0(k,j+1,i), 0 ) .AND. &
	2166	BTEST( wall_flags_total_0(k,j,i-1), 0 ) .AND. &
	2167	BTEST( wall_flags_total_0(k,j,i+1), 0 ) .AND. &
	2168	BTEST( wall_flags_total_0(k,j-1,i-1), 0 ) .AND. &
	2169	BTEST( wall_flags_total_0(k,j+1,i-1), 0 ) .AND. &
	2170	BTEST( wall_flags_total_0(k,j-1,i+1), 0 ) .AND. &
	2171	BTEST( wall_flags_total_0(k,j+1,i+1), 0 ) ) &
[4346]	2172	wall_flags_total_0(k,j,i) = IBSET( wall_flags_total_0(k,j,i), 24 )
	2173	ENDDO
	2174	ENDDO
	2175	ENDDO
[1]	2176	!
[2232]	2177	!-- Set further special flags
	2178	DO i = nxl, nxr
	2179	DO j = nys, nyn
	2180	DO k = nzb, nzt+1
[1]	2181	!
[2232]	2182	!-- scalar grid, former nzb_diff_s_inner.
[4648]	2183	!-- Note, use this flag also to mask topography in diffusion_u and diffusion_v along the
	2184	!-- vertical direction. In case of use_surface_fluxes, fluxes are calculated via MOST,
	2185	!-- else, simple gradient approach is applied. Please note, in case of u- and v-diffuison,
	2186	!-- a small error is made at edges (on the east side for u, at the north side for v), since
	2187	!-- topography on scalar grid point is used instead of topography on u/v-grid. As number of
	2188	!-- topography grid points on uv-grid is different than s-grid, different number of surface
	2189	!-- elements would be required. In order to avoid this, treat edges (u(k,j,i+1)) simply by
	2190	!-- a gradient approach, i.e. these points are not masked within diffusion_u. Tests had
	2191	!-- shown that the effect on the flow is negligible.
[2232]	2192	IF ( constant_flux_layer .OR. use_surface_fluxes ) THEN
[4648]	2193	IF ( BTEST( wall_flags_total_0(k,j,i), 0 ) ) &
[4346]	2194	wall_flags_total_0(k,j,i) = IBSET( wall_flags_total_0(k,j,i), 8 )
[2232]	2195	ELSE
[4346]	2196	wall_flags_total_0(k,j,i) = IBSET( wall_flags_total_0(k,j,i), 8 )
[2232]	2197	ENDIF
[1]	2198
[2232]	2199	ENDDO
	2200	!
[4648]	2201	!-- Special flag to control vertical diffusion at model top - former nzt_diff
[4346]	2202	wall_flags_total_0(:,j,i) = IBSET( wall_flags_total_0(:,j,i), 9 )
[2232]	2203	IF ( use_top_fluxes ) &
[4346]	2204	wall_flags_total_0(nzt+1,j,i) = IBCLR( wall_flags_total_0(nzt+1,j,i), 9 )
[1]	2205
[2696]	2206
[2232]	2207	DO k = nzb+1, nzt
	2208	!
[4648]	2209	!-- Special flag on u grid, former nzb_u_inner + 1, required for disturb_field and
	2210	!-- initialization. Do not disturb directly at topography, as well as initialize u with
	2211	!-- zero one grid point outside of topography.
	2212	IF ( BTEST( wall_flags_total_0(k-1,j,i), 1 ) .AND. &
	2213	BTEST( wall_flags_total_0(k,j,i), 1 ) .AND. &
	2214	BTEST( wall_flags_total_0(k+1,j,i), 1 ) ) &
[4346]	2215	wall_flags_total_0(k,j,i) = IBSET( wall_flags_total_0(k,j,i), 20 )
[2232]	2216	!
[4648]	2217	!-- Special flag on v grid, former nzb_v_inner + 1, required for disturb_field and
	2218	!-- initialization. Do not disturb directly at topography, as well as initialize v with
	2219	!-- zero one grid point outside of topography.
	2220	IF ( BTEST( wall_flags_total_0(k-1,j,i), 2 ) .AND. &
	2221	BTEST( wall_flags_total_0(k,j,i), 2 ) .AND. &
	2222	BTEST( wall_flags_total_0(k+1,j,i), 2 ) ) &
[4346]	2223	wall_flags_total_0(k,j,i) = IBSET( wall_flags_total_0(k,j,i), 21 )
[2232]	2224	!
[4648]	2225	!-- Special flag on scalar grid, former nzb_s_inner+1. Used for lpm_sgs_tke
	2226	IF ( BTEST( wall_flags_total_0(k,j,i), 0 ) .AND. &
	2227	BTEST( wall_flags_total_0(k-1,j,i), 0 ) .AND. &
	2228	BTEST( wall_flags_total_0(k+1,j,i), 0 ) ) &
[4346]	2229	wall_flags_total_0(k,j,i) = IBSET( wall_flags_total_0(k,j,i), 25 )
[2232]	2230	!
[4648]	2231	!-- Special flag on scalar grid, nzb_diff_s_outer - 1, required in in production_e
[2232]	2232	IF ( constant_flux_layer .OR. use_surface_fluxes ) THEN
[4648]	2233	IF ( BTEST( wall_flags_total_0(k,j,i), 24 ) .AND. &
	2234	BTEST( wall_flags_total_0(k-1,j,i), 24 ) .AND. &
	2235	BTEST( wall_flags_total_0(k+1,j,i), 0 ) ) &
[4346]	2236	wall_flags_total_0(k,j,i) = IBSET( wall_flags_total_0(k,j,i), 29 )
[2232]	2237	ELSE
[4648]	2238	IF ( BTEST( wall_flags_total_0(k,j,i), 0 ) ) &
[4346]	2239	wall_flags_total_0(k,j,i) = IBSET( wall_flags_total_0(k,j,i), 29 )
[1]	2240	ENDIF
[2232]	2241	!
[4648]	2242	!-- Special flag on scalar grid, nzb_diff_s_outer - 1, required in
[2232]	2243	!-- in production_e
	2244	IF ( constant_flux_layer .OR. use_surface_fluxes ) THEN
[4648]	2245	IF ( BTEST( wall_flags_total_0(k,j,i), 0 ) .AND. &
	2246	BTEST( wall_flags_total_0(k-1,j,i), 0 ) .AND. &
	2247	BTEST( wall_flags_total_0(k+1,j,i), 0 ) ) &
[4346]	2248	wall_flags_total_0(k,j,i) = IBSET( wall_flags_total_0(k,j,i), 30 )
[2232]	2249	ELSE
[4648]	2250	IF ( BTEST( wall_flags_total_0(k,j,i), 0 ) ) &
[4346]	2251	wall_flags_total_0(k,j,i) = IBSET( wall_flags_total_0(k,j,i), 30 )
[2232]	2252	ENDIF
	2253	ENDDO
	2254	!
	2255	!-- Flags indicating downward facing walls
[4340]	2256	DO k = nzb+1, nzt+1
[2232]	2257	!
	2258	!-- Scalar grid
[4648]	2259	IF ( BTEST( wall_flags_total_0(k-1,j,i), 0 ) .AND. &
	2260	.NOT. BTEST( wall_flags_total_0(k,j,i), 0 ) ) &
	2261	wall_flags_total_0(k,j,i) = IBSET( wall_flags_total_0(k,j,i), 13 )
[2232]	2262	!
	2263	!-- Downward facing wall on u grid
[4648]	2264	IF ( BTEST( wall_flags_total_0(k-1,j,i), 1 ) .AND. &
	2265	.NOT. BTEST( wall_flags_total_0(k,j,i), 1 ) ) &
[4346]	2266	wall_flags_total_0(k,j,i) = IBSET( wall_flags_total_0(k,j,i), 15 )
[2232]	2267	!
	2268	!-- Downward facing wall on v grid
[4648]	2269	IF ( BTEST( wall_flags_total_0(k-1,j,i), 2 ) .AND. &
	2270	.NOT. BTEST( wall_flags_total_0(k,j,i), 2 ) ) &
[4346]	2271	wall_flags_total_0(k,j,i) = IBSET( wall_flags_total_0(k,j,i), 17 )
[2232]	2272	!
	2273	!-- Downward facing wall on w grid
[4648]	2274	IF ( BTEST( wall_flags_total_0(k-1,j,i), 3 ) .AND. &
	2275	.NOT. BTEST( wall_flags_total_0(k,j,i), 3 ) ) &
[4346]	2276	wall_flags_total_0(k,j,i) = IBSET( wall_flags_total_0(k,j,i), 19 )
[2232]	2277	ENDDO
	2278	!
	2279	!-- Flags indicating upward facing walls
	2280	DO k = nzb, nzt
	2281	!
	2282	!-- Upward facing wall on scalar grid
[4648]	2283	IF ( .NOT. BTEST( wall_flags_total_0(k,j,i), 0 ) .AND. &
	2284	BTEST( wall_flags_total_0(k+1,j,i), 0 ) ) &
[4346]	2285	wall_flags_total_0(k,j,i) = IBSET( wall_flags_total_0(k,j,i), 12 )
[2232]	2286	!
	2287	!-- Upward facing wall on u grid
[4648]	2288	IF ( .NOT. BTEST( wall_flags_total_0(k,j,i), 1 ) .AND. &
	2289	BTEST( wall_flags_total_0(k+1,j,i), 1 ) ) &
[4346]	2290	wall_flags_total_0(k,j,i) = IBSET( wall_flags_total_0(k,j,i), 14 )
[1]	2291
[4648]	2292	!
[2232]	2293	!-- Upward facing wall on v grid
[4648]	2294	IF ( .NOT. BTEST( wall_flags_total_0(k,j,i), 2 ) .AND. &
	2295	BTEST( wall_flags_total_0(k+1,j,i), 2 ) ) &
[4346]	2296	wall_flags_total_0(k,j,i) = IBSET( wall_flags_total_0(k,j,i), 16 )
[4648]	2297
[2232]	2298	!
	2299	!-- Upward facing wall on w grid
[4648]	2300	IF ( .NOT. BTEST( wall_flags_total_0(k,j,i), 3 ) .AND. &
	2301	BTEST( wall_flags_total_0(k+1,j,i), 3 ) ) &
[4346]	2302	wall_flags_total_0(k,j,i) = IBSET( wall_flags_total_0(k,j,i), 18 )
[2232]	2303	!
	2304	!-- Special flag on scalar grid, former nzb_s_inner
[4648]	2305	IF ( BTEST( wall_flags_total_0(k,j,i), 0 ) .OR. &
	2306	BTEST( wall_flags_total_0(k,j,i), 12 ) .OR. &
	2307	BTEST( wall_flags_total_0(k,j,i), 13 ) ) &
[4346]	2308	wall_flags_total_0(k,j,i) = IBSET( wall_flags_total_0(k,j,i), 22 )
[2232]	2309	!
[4648]	2310	!-- Special flag on scalar grid, nzb_diff_s_inner - 1, required for
[2232]	2311	!-- flow_statistics
	2312	IF ( constant_flux_layer .OR. use_surface_fluxes ) THEN
[4648]	2313	IF ( BTEST( wall_flags_total_0(k,j,i), 0 ) .AND. &
	2314	BTEST( wall_flags_total_0(k+1,j,i), 0 ) ) &
[4346]	2315	wall_flags_total_0(k,j,i) = IBSET( wall_flags_total_0(k,j,i), 23 )
[2232]	2316	ELSE
[4648]	2317	IF ( BTEST( wall_flags_total_0(k,j,i), 22 ) ) &
[4346]	2318	wall_flags_total_0(k,j,i) = IBSET( wall_flags_total_0(k,j,i), 23 )
[1]	2319	ENDIF
	2320
[4648]	2321
[2232]	2322	ENDDO
[4346]	2323	wall_flags_total_0(nzt+1,j,i) = IBSET( wall_flags_total_0(nzt+1,j,i), 22 )
	2324	wall_flags_total_0(nzt+1,j,i) = IBSET( wall_flags_total_0(nzt+1,j,i), 23 )
[4109]	2325	!
[4648]	2326	!-- Set flags indicating that topography is close by in horizontal direction, i.e. flags that
	2327	!-- infold the topography. These will be used to set advection flags for passive scalars,
	2328	!-- where due to large gradients near buildings stationary numerical oscillations can produce
	2329	!-- unrealistically high concentrations. This is only necessary if WS-scheme is applied for
	2330	!-- scalar advection. Note, these flags will be only used for passive scalars such as chemical
	2331	!-- species or aerosols.
[4109]	2332	IF ( scalar_advec == 'ws-scheme' ) THEN
	2333	DO k = nzb, nzt
[4648]	2334	IF ( BTEST( wall_flags_total_0(k,j,i), 0 ) .AND. ( &
	2335	ANY( .NOT. BTEST( wall_flags_total_0(k,j-3:j+3,i-1), 0 ) ) .OR. &
	2336	ANY( .NOT. BTEST( wall_flags_total_0(k,j-3:j+3,i-2), 0 ) ) .OR. &
	2337	ANY( .NOT. BTEST( wall_flags_total_0(k,j-3:j+3,i-3), 0 ) ) .OR. &
	2338	ANY( .NOT. BTEST( wall_flags_total_0(k,j-3:j+3,i+1), 0 ) ) .OR. &
	2339	ANY( .NOT. BTEST( wall_flags_total_0(k,j-3:j+3,i+2), 0 ) ) .OR. &
	2340	ANY( .NOT. BTEST( wall_flags_total_0(k,j-3:j+3,i+3), 0 ) ) .OR. &
	2341	ANY( .NOT. BTEST( wall_flags_total_0(k,j-1,i-3:i+3), 0 ) ) .OR. &
	2342	ANY( .NOT. BTEST( wall_flags_total_0(k,j-2,i-3:i+3), 0 ) ) .OR. &
	2343	ANY( .NOT. BTEST( wall_flags_total_0(k,j-3,i-3:i+3), 0 ) ) .OR. &
	2344	ANY( .NOT. BTEST( wall_flags_total_0(k,j+1,i-3:i+3), 0 ) ) .OR. &
	2345	ANY( .NOT. BTEST( wall_flags_total_0(k,j+2,i-3:i+3), 0 ) ) .OR. &
	2346	ANY( .NOT. BTEST( wall_flags_total_0(k,j+3,i-3:i+3), 0 ) ) &
	2347	) &
	2348	) &
[4346]	2349	wall_flags_total_0(k,j,i) = IBSET( wall_flags_total_0(k,j,i), 31 )
[4109]	2350	ENDDO
	2351	ENDIF
[2232]	2352	ENDDO
	2353	ENDDO
	2354	!
[2696]	2355	!-- Finally, set identification flags indicating natural terrain or buildings.
[4648]	2356	!-- Natural terrain grid points. Information on the type of the surface is stored in bit 1 of
	2357	!-- 3D Integer array topo. However, this bit is only set when topography is read from file. In order
	2358	!-- to run the land-surface model also without topography information, set bit 1 explicitely in this
	2359	!-- case.
	2360	!--
[4294]	2361	!-- Natural terrain grid points
	2362	!-- If no topography is initialized, the land-surface is at k = nzb.
	2363	IF ( TRIM( topography ) /= 'read_from_file' ) THEN
[4329]	2364	wall_flags_static_0(nzb,:,:) = IBSET( wall_flags_static_0(nzb,:,:), 5 )
[4294]	2365	ELSE
	2366	DO i = nxl, nxr
	2367	DO j = nys, nyn
	2368	DO k = nzb, nzt+1
[4648]	2369	!
[4294]	2370	!-- Natural terrain grid point
[4648]	2371	IF ( BTEST( topo(k,j,i), 1 ) ) &
[4329]	2372	wall_flags_static_0(k,j,i) = IBSET( wall_flags_static_0(k,j,i), 5 )
[2696]	2373	ENDDO
	2374	ENDDO
[4294]	2375	ENDDO
[2696]	2376	ENDIF
	2377	!
	2378	!-- Building grid points.
[4294]	2379	DO i = nxl, nxr
	2380	DO j = nys, nyn
	2381	DO k = nzb, nzt+1
[4648]	2382	IF ( BTEST( topo(k,j,i), 2 ) ) &
[4329]	2383	wall_flags_static_0(k,j,i) = IBSET( wall_flags_static_0(k,j,i), 6 )
[2696]	2384	ENDDO
	2385	ENDDO
[4294]	2386	ENDDO
[2696]	2387	!
[4314]	2388	!-- Set flag 4, indicating new topography grid points due to filtering.
	2389	DO i = nxl, nxr
	2390	DO j = nys, nyn
	2391	DO k = nzb, nzt+1
[4648]	2392	IF ( BTEST( topo(k,j,i), 4 ) ) &
[4329]	2393	wall_flags_static_0(k,j,i) = IBSET( wall_flags_static_0(k,j,i), 4 )
[4314]	2394	ENDDO
	2395	ENDDO
	2396	ENDDO
[4648]	2397
[4346]	2398	CALL exchange_horiz_int( wall_flags_static_0, nys, nyn, nxl, nxr, nzt, nbgp )
[4648]	2399
[4346]	2400	DO i = nxl, nxr
	2401	DO j = nys, nyn
	2402	DO k = nzb, nzt+1
	2403	wall_flags_total_0(k,j,i) = IOR( wall_flags_total_0(k,j,i), wall_flags_static_0(k,j,i) )
	2404	ENDDO
	2405	ENDDO
	2406	ENDDO
[4314]	2407	!
[2232]	2408	!-- Exchange ghost points for wall flags
[4346]	2409	CALL exchange_horiz_int( wall_flags_total_0, nys, nyn, nxl, nxr, nzt, nbgp )
[2232]	2410	!
[4648]	2411	!-- Set boundary conditions also for flags. Can be interpreted as Neumann boundary conditions for
	2412	!-- topography.
[2232]	2413	IF ( .NOT. bc_ns_cyc ) THEN
[2696]	2414	IF ( nys == 0 ) THEN
[4648]	2415	DO i = 1, nbgp
[4346]	2416	wall_flags_total_0(:,nys-i,:) = wall_flags_total_0(:,nys,:)
[2696]	2417	ENDDO
	2418	ENDIF
	2419	IF ( nyn == ny ) THEN
[4648]	2420	DO i = 1, nbgp
[4346]	2421	wall_flags_total_0(:,nyn+i,:) = wall_flags_total_0(:,nyn,:)
[2696]	2422	ENDDO
	2423	ENDIF
[2232]	2424	ENDIF
	2425	IF ( .NOT. bc_lr_cyc ) THEN
[2696]	2426	IF ( nxl == 0 ) THEN
[4648]	2427	DO i = 1, nbgp
[4346]	2428	wall_flags_total_0(:,:,nxl-i) = wall_flags_total_0(:,:,nxl)
[2696]	2429	ENDDO
[2232]	2430	ENDIF
[4648]	2431	IF ( nxr == nx ) THEN
	2432	DO i = 1, nbgp
	2433	wall_flags_total_0(:,:,nxr+i) = wall_flags_total_0(:,:,nxr)
[2232]	2434	ENDDO
[4648]	2435	ENDIF
[2232]	2436	ENDIF
[4168]	2437	!
[4648]	2438	!-- Pre-calculate topography top indices (former get_topography_top_index
[4168]	2439	!-- function)
[4653]	2440	ALLOCATE( topo_top_ind(nysg:nyng,nxlg:nxrg,0:5) )
[4168]	2441	!
	2442	!-- Uppermost topography index on scalar grid
	2443	ibit = 12
[4648]	2444	topo_top_ind(:,:,0) = MAXLOC( MERGE( 1, 0, BTEST( wall_flags_total_0(:,:,:), ibit ) ), DIM=1 ) &
	2445	- 1
[4168]	2446	!
[4648]	2447	!-- Uppermost topography index on u grid
[4168]	2448	ibit = 14
[4648]	2449	topo_top_ind(:,:,1) = MAXLOC( MERGE( 1, 0, BTEST( wall_flags_total_0(:,:,:), ibit ) ), DIM=1 ) &
	2450	- 1
[4168]	2451	!
[4648]	2452	!-- Uppermost topography index on v grid
[4168]	2453	ibit = 16
[4648]	2454	topo_top_ind(:,:,2) = MAXLOC( MERGE( 1, 0, BTEST( wall_flags_total_0(:,:,:), ibit ) ), DIM=1 ) &
	2455	- 1
[4168]	2456	!
	2457	!-- Uppermost topography index on w grid
	2458	ibit = 18
[4648]	2459	topo_top_ind(:,:,3) = MAXLOC( MERGE( 1, 0, BTEST( wall_flags_total_0(:,:,:), ibit ) ), DIM=1 ) &
	2460	- 1
[4168]	2461	!
	2462	!-- Uppermost topography index on scalar outer grid
	2463	ibit = 24
[4648]	2464	topo_top_ind(:,:,4) = MAXLOC( MERGE( 1, 0, BTEST( wall_flags_total_0(:,:,:), ibit ) ), DIM=1 ) &
	2465	- 1
[4653]	2466	!
	2467	!-- Uppermost topography index including full-3D geometry
	2468	ibit = 12
	2469	DO k = nzb, nzt+1
	2470	WHERE( BTEST( wall_flags_total_0(k,:,:), ibit ) ) topo_top_ind(:,:,5) = k
	2471	ENDDO
[4414]	2472
[2696]	2473	END SUBROUTINE set_topo_flags

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |