source: palm/trunk/SOURCE/init_coupling.f90 @ 418

Last change on this file since 418 was 392, checked in by raasch, 15 years ago

New:
---

Adapted for machine lck
(mrun, mbuild, subjob)

bc_lr/bc_ns in most subroutines replaced by LOGICAL variables bc_lr_cyc,
bc_ns_cyc for speed optimization
(check_parameters, diffusion_u, diffusion_v, diffusion_w, modules)

Additional timestep criterion in case of simulations with plant canopy (timestep)

Check for illegal entries in section_xy|xz|yz that exceed nz+1|ny+1|nx+1
(check_parameters)

Clipping of dvrp output implemented. Default colourtable for particles
implemented, particle attributes (color, dvrp_size) can be set with new
parameters particle_color, particle_dvrpsize, color_interval,
dvrpsize_interval (init_dvrp, data_output_dvrp, modules, user_data_output_dvrp).
Slicer attributes (dvrp) are set with new routine set_slicer_attributes_dvrp
and are controlled with existing parameters slicer_range_limits.
(set_slicer_attributes_dvrp)

Ocean atmosphere coupling allows to use independent precursor runs in order
to account for different spin-up times. The time when coupling has to be
started is given by new inipar parameter coupling_start_time. The precursor
ocean run has to be started using new mrun option "-y" in order to add
appendix "_O" to all output files.
(check_for_restart, check_parameters, data_output_2d, data_output_3d,
data_output_profiles, data_output_ptseries, data_output_spectra,
data_output_tseries, header, init_coupling, modules, mrun,
parin, read_var_list, surface_coupler, time_integration, write_var_list)

Polygon reduction for topography and ground plate isosurface. Reduction level
for buildings can be chosen with parameter cluster_size. (init_dvrp)

External pressure gradient (check_parameters, header, init_3d_model, modules,
parin, prognostic_equations, read_var_list, write_var_list)

New topography case 'single_street_canyon' (header, init_grid, modules, parin,
read_var_list, user_check_parameters, user_header, user_init_grid, write_var_list)

Option to predefine a target bulk velocity for conserve_volume_flow
(check_parameters, header, init_3d_model, modules, parin, read_var_list,
write_var_list)

Option for user defined 2D data output in xy cross sections at z=nzb+1
(data_output_2d, user_data_output_2d)

xy cross section output of surface heatfluxes (latent, sensible)
(average_3d_data, check_parameters, data_output_2d, modules, read_3d_binary,
sum_up_3d_data, write_3d_binary)

average_3d_data, check_for_restart, check_parameters, data_output_2d, data_output_3d, data_output_dvrp, data_output_profiles, data_output_ptseries, data_output_spectra, data_output_tseries, init_coupling, init_dvrp, init_grid, init_3d_model, header, mbuild, modules, mrun, package_parin, parin, prognostic_equations, read_3d_binary, read_var_list, subjob, surface_coupler, timestep, time_integration, user_check_parameters, user_data_output_2d, user_data_output_dvrp, user_header, user_init_grid, write_3d_binary, write_var_list

New: set_particle_attributes, set_slicer_attributes_dvrp

Changed:


lcmuk changed to lc to avoid problems with Intel compiler on sgi-ice
(poisfft)

For extended NetCDF files, the updated title attribute includes an update of
time_average_text where appropriate. (netcdf)

In case of restart runs without extension, initial profiles are not written
to NetCDF-file anymore. (data_output_profiles, modules, read_var_list, write_var_list)

Small change in formatting of the message handling routine concering the output in the
job protocoll. (message)

initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill', now
independent of turbulent_inflow (check_parameters, header, init_3d_model)

2 NetCDF error numbers changed. (data_output_3d)

A Link to the website appendix_a.html is printed for further information
about the possible errors. (message)

Temperature gradient criterion for estimating the boundary layer height
replaced by the gradient criterion of Sullivan et al. (1998). (flow_statistics)

NetCDF unit attribute in timeseries output in case of statistic regions added
(netcdf)

Output of NetCDF messages with aid of message handling routine.
(check_open, close_file, data_output_2d, data_output_3d,
data_output_profiles, data_output_ptseries, data_output_spectra,
data_output_tseries, netcdf, output_particles_netcdf)

Output of messages replaced by message handling routine.
(advec_particles, advec_s_bc, buoyancy, calc_spectra, check_for_restart,
check_open, coriolis, cpu_log, data_output_2d, data_output_3d, data_output_dvrp,
data_output_profiles, data_output_spectra, fft_xy, flow_statistics, header,
init_1d_model, init_3d_model, init_dvrp, init_grid, init_particles, init_pegrid,
netcdf, parin, plant_canopy_model, poisfft_hybrid, poismg, read_3d_binary,
read_var_list, surface_coupler, temperton_fft, timestep, user_actions,
user_data_output_dvrp, user_dvrp_coltab, user_init_grid, user_init_plant_canopy,
user_parin, user_read_restart_data, user_spectra )

Maximum number of tails is calculated from maximum number of particles and
skip_particles_for_tail (init_particles)

Value of vertical_particle_advection may differ for each particle group
(advec_particles, header, modules)

First constant in array den also defined as type double. (eqn_state_seawater)

Parameter dvrp_psize moved from particles_par to dvrp_graphics_par. (package_parin)

topography_grid_convention moved from userpar to inipar (check_parameters,
header, parin, read_var_list, user_check_parameters, user_header,
user_init_grid, user_parin, write_var_list)

Default value of grid_matching changed to strict.

Adjustments for runs on lcxt4 (necessary due to an software update on CRAY) and
for coupled runs on ibmy (mrun, subjob)

advec_particles, advec_s_bc, buoyancy, calc_spectra, check_for_restart, check_open, check_parameters, close_file, coriolis, cpu_log, data_output_2d, data_output_3d, data_output_dvrp, data_output_profiles, data_output_ptseries, data_output_spectra, data_output_tseries, eqn_state_seawater, fft_xy, flow_statistics, header, init_1d_model, init_3d_model, init_dvrp, init_grid, init_particles, init_pegrid, message, mrun, netcdf, output_particles_netcdf, package_parin, parin, plant_canopy_model, poisfft, poisfft_hybrid, poismg, read_3d_binary, read_var_list, sort_particles, subjob, user_check_parameters, user_header, user_init_grid, user_parin, surface_coupler, temperton_fft, timestep, user_actions, user_data_output_dvrp, user_dvrp_coltab, user_init_grid, user_init_plant_canopy, user_parin, user_read_restart_data, user_spectra, write_var_list

Errors:


Bugfix: Initial hydrostatic pressure profile in case of ocean runs is now
calculated in 5 iteration steps. (init_ocean)

Bugfix: wrong sign in buoyancy production of ocean part in case of not using
the reference density (only in 3D routine production_e) (production_e)

Bugfix: output of averaged 2d/3d quantities requires that an avaraging
interval has been set, respective error message is included (check_parameters)

Bugfix: Output on unit 14 only if requested by write_binary.
(user_last_actions)

Bugfix to avoid zero division by km_neutral (production_e)

Bugfix for extended NetCDF files: In order to avoid 'data mode' errors if
updated attributes are larger than their original size, NF90_PUT_ATT is called
in 'define mode' enclosed by NF90_REDEF and NF90_ENDDEF calls. This implies a
possible performance loss; an alternative strategy would be to ensure equal
attribute size in a job chain. (netcdf)

Bugfix: correction of initial volume flow for non-flat topography (init_3d_model)
Bugfix: zero initialization of arrays within buildings for 'cyclic_fill' (init_3d_model)

Bugfix: to_be_resorted => s_av for time-averaged scalars (data_output_2d, data_output_3d)

Bugfix: error in formatting the output (message)

Bugfix: avoid that ngp_2dh_s_inner becomes zero (init_3_model)

Typographical error: unit of wpt in dots_unit (modules)

Bugfix: error in check, if particles moved further than one subdomain length.
This check must not be applied for newly released particles. (advec_particles)

Bugfix: several tail counters are initialized, particle_tail_coordinates is
only written to file if its third index is > 0, arrays for tails are allocated
with a minimum size of 10 tails if there is no tail initially (init_particles,
advec_particles)

Bugfix: pressure included for profile output (check_parameters)

Bugfix: Type of count and count_rate changed to default INTEGER on NEC machines
(cpu_log)

Bugfix: output if particle time series only if particle advection is switched
on. (time_integration)

Bugfix: qsws was calculated in case of constant heatflux = .FALSE. (prandtl_fluxes)

Bugfix: averaging along z is not allowed for 2d quantities (e.g. u* and z0) (data_output_2d)

Typographical errors (netcdf)

If the inversion height calculated by the prerun is zero, inflow_damping_height
must be explicitly specified (init_3d_model)

Small bugfix concerning 3d 64bit netcdf output format (header)

Bugfix: dt_fixed removed from the restart file, because otherwise, no change
from a fixed to a variable timestep would be possible in restart runs.
(read_var_list, write_var_list)

Bugfix: initial setting of time_coupling in coupled restart runs (time_integration)

advec_particles, check_parameters, cpu_log, data_output_2d, data_output_3d, header, init_3d_model, init_particles, init_ocean, modules, netcdf, prandtl_fluxes, production_e, read_var_list, time_integration, user_last_actions, write_var_list

  • Property svn:keywords set to Id
File size: 3.8 KB
Line 
1  SUBROUTINE init_coupling
2
3!------------------------------------------------------------------------------!
4! Actual revisions:
5! -----------------
6!
7!
8! Former revisions:
9! ------------------
10! $Id: init_coupling.f90 392 2009-09-24 10:39:14Z heinze $
11!
12! 291 2009-04-16 12:07:26Z raasch
13! Coupling with independent precursor runs.
14!
15! 222 2009-01-12 16:04:16Z letzel
16! Initial revision
17!
18! Description:
19! ------------
20! Initializing coupling via MPI-1 or MPI-2 if the coupled version of PALM is
21! called.
22!------------------------------------------------------------------------------!
23
24    USE pegrid
25    USE control_parameters
26
27    IMPLICIT NONE
28
29!
30!-- Local variables
31    INTEGER               ::  i, inter_color
32    INTEGER, DIMENSION(:) ::  bc_data(0:3) = 0
33
34!
35!-- Get information about the coupling mode from the environment variable
36!-- which has been set by the mpiexec command.
37!-- This method is currently not used because the mpiexec command is not
38!-- available on some machines
39!    CALL local_getenv( 'coupling_mode', 13, coupling_mode, i )
40!    IF ( i == 0 )  coupling_mode = 'uncoupled'
41!    IF ( coupling_mode == 'ocean_to_atmosphere' )  coupling_char = '_O'
42
43!
44!-- Get information about the coupling mode from standard input (PE0 only) and
45!-- distribute it to the other PEs. If __mpi2 was defined, suggest a
46!-- coupling via MPI-2. Otherwise initate a coupling using MPI-1 only.
47!-- In this case, distribute PEs to 2 new communicators.
48!-- ATTENTION: numprocs will be reset according to the new communicators
49#if defined ( __parallel )
50    IF ( myid == 0 )  THEN
51       READ (*,*,ERR=10,END=10)  coupling_mode, bc_data(1), bc_data(2)
5210     CONTINUE
53#if defined( __mpi2 )
54       IF ( TRIM( coupling_mode ) == 'atmosphere_to_ocean' )  THEN
55          i = 1
56       ELSEIF ( TRIM( coupling_mode ) == 'ocean_to_atmosphere' )  THEN
57          i = 2
58       ELSE
59          i = 0
60       ENDIF
61#else
62       IF ( TRIM( coupling_mode ) == 'coupled_run' )  THEN
63          i = 1
64       ELSE
65          i = 0
66       ENDIF
67#endif
68       bc_data(0) = i
69
70!
71!--    Check if '_O' has to be used as file extension in an uncoupled ocean
72!--    run. This is required, if this run shall be continued as a coupled run.
73       IF ( TRIM( coupling_mode ) == 'precursor_ocean' )  bc_data(3) = 1
74
75    ENDIF
76
77    CALL MPI_BCAST( bc_data(0), 4, MPI_INTEGER, 0, MPI_COMM_WORLD, ierr )
78    i = bc_data(0)
79
80#if defined ( __mpi2 )
81    IF ( i == 0 )  THEN
82       coupling_mode = 'uncoupled'
83    ELSEIF ( i == 1 )  THEN
84       coupling_mode = 'atmosphere_to_ocean'
85    ELSEIF ( i == 2 )  THEN
86       coupling_mode = 'ocean_to_atmosphere'
87    ENDIF
88    target_id = myid
89#else
90    IF ( i == 0 ) THEN
91       coupling_mode = 'uncoupled'
92    ELSE
93       comm_inter = MPI_COMM_WORLD
94
95       IF ( myid < bc_data(1) ) THEN
96          inter_color = 0
97          numprocs = bc_data(1)
98       ELSE
99          inter_color = 1
100          numprocs = bc_data(2)
101       ENDIF
102!
103!--    Calculate the target PE for coupling and set up the new communicators.
104!--    Currently only 1:1 topologies are supported.
105       target_id = myid - ISIGN( numprocs, inter_color - 1 )
106       IF ( inter_color == 0 ) THEN
107          coupling_mode = 'atmosphere_to_ocean'
108       ELSE
109          coupling_mode = 'ocean_to_atmosphere'
110       ENDIF
111       CALL MPI_COMM_SPLIT( MPI_COMM_WORLD, inter_color, 0, comm_palm, ierr )
112       comm2d = comm_palm
113
114!
115!--    Write a flag file for the ocean model and the other atmosphere
116!--    processes.
117       OPEN( 90, FILE='COUPLING_PORT_OPENED', FORM='FORMATTED' )
118       WRITE ( 90, '(''TRUE'')' )
119       CLOSE ( 90 )
120    ENDIF
121#endif
122#endif
123
124!
125!-- In case of a precursor ocean run (followed by a coupled run), or a
126!-- coupled atmosphere-ocean run, set the file extension for the ocean files
127    IF ( TRIM( coupling_mode ) == 'ocean_to_atmosphere' .OR. bc_data(3) == 1 ) &
128    THEN
129       coupling_char = '_O'
130    ENDIF
131
132 END SUBROUTINE init_coupling
Note: See TracBrowser for help on using the repository browser.