source: palm/trunk/SOURCE/init_3d_model.f90 @ 3839

Last change on this file since 3839 was 3761, checked in by raasch, 5 years ago

unused variables removed, OpenACC directives re-formatted, statements added to avoid compiler warnings

  • Property svn:keywords set to Id
  • Property svn:mergeinfo set to False
    /palm/branches/chemistry/SOURCE/init_3d_model.f902047-3190,​3218-3297
    /palm/branches/forwind/SOURCE/init_3d_model.f901564-1913
    /palm/branches/mosaik_M2/init_3d_model.f902360-3471
    /palm/branches/palm4u/SOURCE/init_3d_model.f902540-2692
    /palm/branches/rans/SOURCE/init_3d_model.f902078-3128
    /palm/branches/resler/SOURCE/init_3d_model.f902023-3605
    /palm/branches/salsa/SOURCE/init_3d_model.f902503-3581
File size: 90.6 KB
Line 
1!> @file init_3d_model.f90
2!------------------------------------------------------------------------------!
3! This file is part of the PALM model system.
4!
5! PALM is free software: you can redistribute it and/or modify it under the
6! terms of the GNU General Public License as published by the Free Software
7! Foundation, either version 3 of the License, or (at your option) any later
8! version.
9!
10! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12! A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
13!
14! You should have received a copy of the GNU General Public License along with
15! PALM. If not, see <http://www.gnu.org/licenses/>.
16!
17! Copyright 1997-2019 Leibniz Universitaet Hannover
18!------------------------------------------------------------------------------!
19!
20! Current revisions:
21! ------------------
22!
23!
24! Former revisions:
25! -----------------
26! $Id: init_3d_model.f90 3761 2019-02-25 15:31:42Z moh.hefny $
27! Move initialization of rmask before initializing user_init_arrays
28!
29! 3711 2019-01-31 13:44:26Z knoop
30! Introduced module_interface_init_checks for post-init checks in modules
31!
32! 3700 2019-01-26 17:03:42Z knoop
33! Some interface calls moved to module_interface + cleanup
34!
35! 3648 2019-01-02 16:35:46Z suehring
36! Rename subroutines for surface-data output
37!
38! 3636 2018-12-19 13:48:34Z raasch
39! nopointer option removed
40!
41! 3609 2018-12-07 13:37:59Z suehring
42! Furhter correction in initialization of surfaces in cyclic-fill case
43!
44! 3608 2018-12-07 12:59:57Z suehring
45! Bugfix in initialization of surfaces in cyclic-fill case
46!
47! 3589 2018-11-30 15:09:51Z suehring
48! Move the control parameter "salsa" from salsa_mod to control_parameters
49! (M. Kurppa)
50!
51! 3582 2018-11-29 19:16:36Z suehring
52! Bugfix in initialization of turbulence generator
53!
54! 3569 2018-11-27 17:03:40Z kanani
55! dom_dwd_user, Schrempf:
56! Remove uv exposure model code, this is now part of biometeorology_mod,
57! remove bio_init_arrays.
58!
59! 3547 2018-11-21 13:21:24Z suehring
60! variables documented
61!
62! 3525 2018-11-14 16:06:14Z kanani
63! Changes related to clean-up of biometeorology (dom_dwd_user)
64!
65! 3524 2018-11-14 13:36:44Z raasch
66! preprocessor directive added to avoid the compiler to complain about unused
67! variable
68!
69! 3473 2018-10-30 20:50:15Z suehring
70! Add virtual measurement module
71!
72! 3472 2018-10-30 20:43:50Z suehring
73! Add indoor model (kanani, srissman, tlang)
74!
75! 3467 2018-10-30 19:05:21Z suehring
76! Implementation of a new aerosol module salsa.
77!
78! 3458 2018-10-30 14:51:23Z kanani
79! from chemistry branch r3443, basit:
80! bug fixed in sums and sums_l for chemistry profile output
81!
82! 3448 2018-10-29 18:14:31Z kanani
83! Add biometeorology
84!
85! 3421 2018-10-24 18:39:32Z gronemeier
86! Initialize surface data output
87!
88! 3415 2018-10-24 11:57:50Z suehring
89! Set bottom boundary condition for geostrophic wind components in inifor
90! initialization
91!
92! 3347 2018-10-15 14:21:08Z suehring
93! - Separate offline nesting from large_scale_nudging_mod
94! - Improve the synthetic turbulence generator
95!
96! 3298 2018-10-02 12:21:11Z kanani
97! Minor formatting (kanani)
98! Added CALL to the chem_emissions module (Russo)
99!
100! 3294 2018-10-01 02:37:10Z raasch
101! allocate and set stokes drift velocity profiles
102!
103! 3298 2018-10-02 12:21:11Z kanani
104! Minor formatting (kanani)
105! Added CALL to the chem_emissions module (Russo)
106!
107! 3294 2018-10-01 02:37:10Z raasch
108! changes concerning modularization of ocean option
109!
110! 3289 2018-09-28 10:23:58Z suehring
111! Introduce module parameter for number of inflow profiles
112!
113! 3288 2018-09-28 10:23:08Z suehring
114! Modularization of all bulk cloud physics code components
115!
116! 3241 2018-09-12 15:02:00Z raasch
117! unused variables removed
118!
119! 3234 2018-09-07 13:46:58Z schwenkel
120! The increase of dots_num in case of radiation or land surface model must
121! be done before user_init is called
122!
123! 3183 2018-07-27 14:25:55Z suehring
124! Revise Inifor initialization
125!
126! 3182 2018-07-27 13:36:03Z suehring
127! Added multi agent system
128!
129! 3129 2018-07-16 07:45:13Z gronemeier
130! Move initialization call for nudging and 1D/3D offline nesting.
131! Revise initialization with inifor data.
132!
133! 3045 2018-05-28 07:55:41Z Giersch
134! Error messages revised
135!
136! 3045 2018-05-28 07:55:41Z Giersch
137! Error messages revised
138!
139! 3042 2018-05-25 10:44:37Z schwenkel
140! Changed the name specific humidity to mixing ratio
141!
142! 3040 2018-05-25 10:22:08Z schwenkel
143! Add option to initialize warm air bubble close to surface
144!
145! 3014 2018-05-09 08:42:38Z maronga
146! Bugfix: initialization of ts_value missing
147!
148! 3011 2018-05-07 14:38:42Z schwenkel
149! removed redundant if statement
150!
151! 3004 2018-04-27 12:33:25Z Giersch
152! precipitation_rate removed
153!
154! 2995 2018-04-19 12:13:16Z Giersch
155! CALL radiation_control is not necessary during initialization because
156! calculation of radiative fluxes at model start is done in radiation_init
157! in any case
158!
159! 2977 2018-04-17 10:27:57Z kanani
160! Implement changes from branch radiation (r2948-2971) with minor modifications
161! (moh.hefny):
162! - set radiation_interactions according to the existence of urban/land vertical
163!   surfaces and trees to activiate RTM
164! - set average_radiation to TRUE if RTM is activiated
165!
166! 2938 2018-03-27 15:52:42Z suehring
167! - Revise Inifor initialization for geostrophic wind components
168! - Initialize synthetic turbulence generator in case of Inifor initialization 
169!
170! 2936 2018-03-27 14:49:27Z suehring
171! Synchronize parent and child models after initialization.
172! Remove obsolete masking of topography grid points for Runge-Kutta weighted
173! tendency arrays.
174!
175! 2920 2018-03-22 11:22:01Z kanani
176! Add call for precalculating apparent solar positions (moh.hefny)
177!
178! 2906 2018-03-19 08:56:40Z Giersch
179! The variables read/write_svf_on_init have been removed. Instead ENVIRONMENT
180! variables read/write_svf have been introduced. Location_message has been
181! added.
182!
183! 2894 2018-03-15 09:17:58Z Giersch
184! Renamed routines with respect to reading restart data, file 13 is closed in
185! rrd_read_parts_of_global now
186!
187! 2867 2018-03-09 09:40:23Z suehring
188! Further bugfix concerning call of user_init.
189!
190! 2864 2018-03-08 11:57:45Z suehring
191! Bugfix, move call of user_init in front of initialization of grid-point
192! arrays
193!
194! 2817 2018-02-19 16:32:21Z knoop
195! Preliminary gust module interface implemented
196!
197! 2776 2018-01-31 10:44:42Z Giersch
198! Variable use_synthetic_turbulence_generator has been abbreviated
199!
200! 2766 2018-01-22 17:17:47Z kanani
201! Removed preprocessor directive __chem
202!
203! 2758 2018-01-17 12:55:21Z suehring
204! In case of spinup of land- and urban-surface model, do not mask wind velocity
205! at first computational grid level
206!
207! 2746 2018-01-15 12:06:04Z suehring
208! Move flag plant canopy to modules
209!
210! 2718 2018-01-02 08:49:38Z maronga
211! Corrected "Former revisions" section
212!
213! 2705 2017-12-18 11:26:23Z maronga
214! Bugfix for reading initial profiles from ls/nuding file
215!
216! 2701 2017-12-15 15:40:50Z suehring
217! Changes from last commit documented
218!
219! 2700 2017-12-15 14:12:35Z suehring
220! Bugfix, missing initialization of surface attributes in case of
221! inifor-initialization branch
222!
223! 2698 2017-12-14 18:46:24Z suehring
224! Bugfix in get_topography_top_index
225!
226! 2696 2017-12-14 17:12:51Z kanani
227! Change in file header (GPL part)
228! Implementation of uv exposure model (FK)
229! Moved initialisation of diss, e, kh, km to turbulence_closure_mod (TG)
230! Added chemical emissions (FK)
231! Initialize masking arrays and number-of-grid-points arrays before initialize
232! LSM, USM and radiation module
233! Initialization with inifor (MS)
234!
235! 2618 2017-11-16 15:37:30Z suehring
236! Reorder calls of init_surfaces.
237!
238! 2564 2017-10-19 15:56:56Z Giersch
239! Variable wind_turbine was added to control_parameters.
240!
241! 2550 2017-10-16 17:12:01Z boeske
242! Modifications to cyclic fill method and turbulence recycling method in case of
243! complex terrain simulations
244!
245! 2513 2017-10-04 09:24:39Z kanani
246! Bugfix in storing initial scalar profile (wrong index)
247!
248! 2350 2017-08-15 11:48:26Z kanani
249! Bugfix in nopointer version
250!
251! 2339 2017-08-07 13:55:26Z gronemeier
252! corrected timestamp in header
253!
254! 2338 2017-08-07 12:15:38Z gronemeier
255! Modularize 1D model
256!
257! 2329 2017-08-03 14:24:56Z knoop
258! Removed temporary bugfix (r2327) as bug is properly resolved by this revision
259!
260! 2327 2017-08-02 07:40:57Z maronga
261! Temporary bugfix
262!
263! 2320 2017-07-21 12:47:43Z suehring
264! Modularize large-scale forcing and nudging
265!
266! 2292 2017-06-20 09:51:42Z schwenkel
267! Implementation of new microphysic scheme: cloud_scheme = 'morrison'
268! includes two more prognostic equations for cloud drop concentration (nc) 
269! and cloud water content (qc).
270!
271! 2277 2017-06-12 10:47:51Z kanani
272! Removed unused variable sums_up_fraction_l
273!
274! 2270 2017-06-09 12:18:47Z maronga
275! dots_num must be increased when LSM and/or radiation is used
276!
277! 2259 2017-06-08 09:09:11Z gronemeier
278! Implemented synthetic turbulence generator
279!
280! 2252 2017-06-07 09:35:37Z knoop
281! rho_air now depending on surface_pressure even in Boussinesq mode
282!
283! 2233 2017-05-30 18:08:54Z suehring
284!
285! 2232 2017-05-30 17:47:52Z suehring
286! Adjustments to new topography and surface concept:
287!   - Modify passed parameters for disturb_field
288!   - Topography representation via flags
289!   - Remove unused arrays.
290!   - Move initialization of surface-related quantities to surface_mod
291!
292! 2172 2017-03-08 15:55:25Z knoop
293! Bugfix: moved parallel random generator initialization into its module
294!
295! 2118 2017-01-17 16:38:49Z raasch
296! OpenACC directives removed
297!
298! 2037 2016-10-26 11:15:40Z knoop
299! Anelastic approximation implemented
300!
301! 2031 2016-10-21 15:11:58Z knoop
302! renamed variable rho to rho_ocean
303!
304! 2011 2016-09-19 17:29:57Z kanani
305! Flag urban_surface is now defined in module control_parameters.
306!
307! 2007 2016-08-24 15:47:17Z kanani
308! Added support for urban surface model,
309! adjusted location_message in case of plant_canopy
310!
311! 2000 2016-08-20 18:09:15Z knoop
312! Forced header and separation lines into 80 columns
313!
314! 1992 2016-08-12 15:14:59Z suehring
315! Initializaton of scalarflux at model top
316! Bugfixes in initialization of surface and top salinity flux, top scalar and
317! humidity fluxes
318!
319! 1960 2016-07-12 16:34:24Z suehring
320! Separate humidity and passive scalar
321! Increase dimension for mean_inflow_profiles
322! Remove inadvertent write-statement
323! Bugfix, large-scale forcing is still not implemented for passive scalars
324!
325! 1957 2016-07-07 10:43:48Z suehring
326! flight module added
327!
328! 1920 2016-05-30 10:50:15Z suehring
329! Initialize us with very small number to avoid segmentation fault during
330! calculation of Obukhov length
331!
332! 1918 2016-05-27 14:35:57Z raasch
333! intermediate_timestep_count is set 0 instead 1 for first call of pres,
334! bugfix: initialization of local sum arrays are moved to the beginning of the
335!         routine because otherwise results from pres are overwritten
336!
337! 1914 2016-05-26 14:44:07Z witha
338! Added initialization of the wind turbine model
339!
340! 1878 2016-04-19 12:30:36Z hellstea
341! The zeroth element of weight_pres removed as unnecessary
342!
343! 1849 2016-04-08 11:33:18Z hoffmann
344! Adapted for modularization of microphysics.
345! precipitation_amount, precipitation_rate, prr moved to arrays_3d.
346! Initialization of nc_1d, nr_1d, pt_1d, qc_1d, qr_1d, q_1d moved to
347! bcm_init.
348!
349! 1845 2016-04-08 08:29:13Z raasch
350! nzb_2d replaced by nzb_u|v_inner
351!
352! 1833 2016-04-07 14:23:03Z raasch
353! initialization of spectra quantities moved to spectra_mod
354!
355! 1831 2016-04-07 13:15:51Z hoffmann
356! turbulence renamed collision_turbulence
357!
358! 1826 2016-04-07 12:01:39Z maronga
359! Renamed radiation calls.
360! Renamed canopy model calls.
361!
362! 1822 2016-04-07 07:49:42Z hoffmann
363! icloud_scheme replaced by microphysics_*
364!
365! 1817 2016-04-06 15:44:20Z maronga
366! Renamed lsm calls.
367!
368! 1815 2016-04-06 13:49:59Z raasch
369! zero-settings for velocities inside topography re-activated (was deactivated
370! in r1762)
371!
372! 1788 2016-03-10 11:01:04Z maronga
373! Added z0q.
374! Syntax layout improved.
375!
376! 1783 2016-03-06 18:36:17Z raasch
377! netcdf module name changed + related changes
378!
379! 1764 2016-02-28 12:45:19Z raasch
380! bugfix: increase size of volume_flow_area_l and volume_flow_initial_l by 1
381!
382! 1762 2016-02-25 12:31:13Z hellstea
383! Introduction of nested domain feature
384!
385! 1738 2015-12-18 13:56:05Z raasch
386! calculate mean surface level height for each statistic region
387!
388! 1734 2015-12-02 12:17:12Z raasch
389! no initial disturbances in case that the disturbance energy limit has been
390! set zero
391!
392! 1707 2015-11-02 15:24:52Z maronga
393! Bugfix: transfer of Richardson number from 1D model to Obukhov length caused
394! devision by zero in neutral stratification
395!
396! 1691 2015-10-26 16:17:44Z maronga
397! Call to init_surface_layer added. rif is replaced by ol and zeta.
398!
399! 1682 2015-10-07 23:56:08Z knoop
400! Code annotations made doxygen readable
401!
402! 1615 2015-07-08 18:49:19Z suehring
403! Enable turbulent inflow for passive_scalar and humidity
404!
405! 1585 2015-04-30 07:05:52Z maronga
406! Initialization of radiation code is now done after LSM initializtion
407!
408! 1575 2015-03-27 09:56:27Z raasch
409! adjustments for psolver-queries
410!
411! 1551 2015-03-03 14:18:16Z maronga
412! Allocation of land surface arrays is now done in the subroutine lsm_init_arrays,
413! which is part of land_surface_model.
414!
415! 1507 2014-12-10 12:14:18Z suehring
416! Bugfix: set horizontal velocity components to zero inside topography
417!
418! 1496 2014-12-02 17:25:50Z maronga
419! Added initialization of the land surface and radiation schemes
420!
421! 1484 2014-10-21 10:53:05Z kanani
422! Changes due to new module structure of the plant canopy model:
423! canopy-related initialization (e.g. lad and canopy_heat_flux) moved to new
424! subroutine init_plant_canopy within the module plant_canopy_model_mod,
425! call of subroutine init_plant_canopy added.
426!
427! 1431 2014-07-15 14:47:17Z suehring
428! var_d added, in order to normalize spectra.
429!
430! 1429 2014-07-15 12:53:45Z knoop
431! Ensemble run capability added to parallel random number generator
432!
433! 1411 2014-05-16 18:01:51Z suehring
434! Initial horizontal velocity profiles were not set to zero at the first vertical
435! grid level in case of non-cyclic lateral boundary conditions.
436!
437! 1406 2014-05-16 13:47:01Z raasch
438! bugfix: setting of initial velocities at k=1 to zero not in case of a
439! no-slip boundary condition for uv
440!
441! 1402 2014-05-09 14:25:13Z raasch
442! location messages modified
443!
444! 1400 2014-05-09 14:03:54Z knoop
445! Parallel random number generator added
446!
447! 1384 2014-05-02 14:31:06Z raasch
448! location messages added
449!
450! 1361 2014-04-16 15:17:48Z hoffmann
451! tend_* removed
452! Bugfix: w_subs is not allocated anymore if it is already allocated
453!
454! 1359 2014-04-11 17:15:14Z hoffmann
455! module lpm_init_mod added to use statements, because lpm_init has become a
456! module
457!
458! 1353 2014-04-08 15:21:23Z heinze
459! REAL constants provided with KIND-attribute
460!
461! 1340 2014-03-25 19:45:13Z kanani
462! REAL constants defined as wp-kind
463!
464! 1322 2014-03-20 16:38:49Z raasch
465! REAL constants defined as wp-kind
466! module interfaces removed
467!
468! 1320 2014-03-20 08:40:49Z raasch
469! ONLY-attribute added to USE-statements,
470! kind-parameters added to all INTEGER and REAL declaration statements,
471! kinds are defined in new module kinds,
472! revision history before 2012 removed,
473! comment fields (!:) to be used for variable explanations added to
474! all variable declaration statements
475!
476! 1316 2014-03-17 07:44:59Z heinze
477! Bugfix: allocation of w_subs
478!
479! 1299 2014-03-06 13:15:21Z heinze
480! Allocate w_subs due to extension of large scale subsidence in combination
481! with large scale forcing data (LSF_DATA)
482!
483! 1241 2013-10-30 11:36:58Z heinze
484! Overwrite initial profiles in case of nudging
485! Inititialize shf and qsws in case of large_scale_forcing
486!
487! 1221 2013-09-10 08:59:13Z raasch
488! +rflags_s_inner in copyin statement, use copyin for most arrays instead of
489! copy
490!
491! 1212 2013-08-15 08:46:27Z raasch
492! array tri is allocated and included in data copy statement
493!
494! 1195 2013-07-01 12:27:57Z heinze
495! Bugfix: move allocation of ref_state to parin.f90 and read_var_list.f90
496!
497! 1179 2013-06-14 05:57:58Z raasch
498! allocate and set ref_state to be used in buoyancy terms
499!
500! 1171 2013-05-30 11:27:45Z raasch
501! diss array is allocated with full size if accelerator boards are used
502!
503! 1159 2013-05-21 11:58:22Z fricke
504! -bc_lr_dirneu, bc_lr_neudir, bc_ns_dirneu, bc_ns_neudir
505!
506! 1153 2013-05-10 14:33:08Z raasch
507! diss array is allocated with dummy elements even if it is not needed
508! (required by PGI 13.4 / CUDA 5.0)
509!
510! 1115 2013-03-26 18:16:16Z hoffmann
511! unused variables removed
512!
513! 1113 2013-03-10 02:48:14Z raasch
514! openACC directive modified
515!
516! 1111 2013-03-08 23:54:10Z raasch
517! openACC directives added for pres
518! array diss allocated only if required
519!
520! 1092 2013-02-02 11:24:22Z raasch
521! unused variables removed
522!
523! 1065 2012-11-22 17:42:36Z hoffmann
524! allocation of diss (dissipation rate) in case of turbulence = .TRUE. added
525!
526! 1053 2012-11-13 17:11:03Z hoffmann
527! allocation and initialisation of necessary data arrays for the two-moment
528! cloud physics scheme the two new prognostic equations (nr, qr):
529! +dr, lambda_r, mu_r, sed_*, xr, *s, *sws, *swst, *, *_p, t*_m, *_1, *_2, *_3,
530! +tend_*, prr
531!
532! 1036 2012-10-22 13:43:42Z raasch
533! code put under GPL (PALM 3.9)
534!
535! 1032 2012-10-21 13:03:21Z letzel
536! save memory by not allocating pt_2 in case of neutral = .T.
537!
538! 1025 2012-10-07 16:04:41Z letzel
539! bugfix: swap indices of mask for ghost boundaries
540!
541! 1015 2012-09-27 09:23:24Z raasch
542! mask is set to zero for ghost boundaries
543!
544! 1010 2012-09-20 07:59:54Z raasch
545! cpp switch __nopointer added for pointer free version
546!
547! 1003 2012-09-14 14:35:53Z raasch
548! nxra,nyna, nzta replaced ny nxr, nyn, nzt
549!
550! 1001 2012-09-13 14:08:46Z raasch
551! all actions concerning leapfrog scheme removed
552!
553! 996 2012-09-07 10:41:47Z raasch
554! little reformatting
555!
556! 978 2012-08-09 08:28:32Z fricke
557! outflow damping layer removed
558! roughness length for scalar quantites z0h added
559! damping zone for the potential temperatur in case of non-cyclic lateral
560! boundaries added
561! initialization of ptdf_x, ptdf_y
562! initialization of c_u_m, c_u_m_l, c_v_m, c_v_m_l, c_w_m, c_w_m_l
563!
564! 849 2012-03-15 10:35:09Z raasch
565! init_particles renamed lpm_init
566!
567! 825 2012-02-19 03:03:44Z raasch
568! wang_collision_kernel renamed wang_kernel
569!
570! Revision 1.1  1998/03/09 16:22:22  raasch
571! Initial revision
572!
573!
574! Description:
575! ------------
576!> Allocation of arrays and initialization of the 3D model via
577!> a) pre-run the 1D model
578!> or
579!> b) pre-set constant linear profiles
580!> or
581!> c) read values of a previous run
582!------------------------------------------------------------------------------!
583 SUBROUTINE init_3d_model
584
585
586    USE advec_ws
587
588    USE arrays_3d
589
590    USE basic_constants_and_equations_mod,                                     &
591        ONLY:  c_p, g, l_v, pi, r_d, exner_function, exner_function_invers,    &
592               ideal_gas_law_rho, ideal_gas_law_rho_pt, barometric_formula
593
594    USE bulk_cloud_model_mod,                                                  &
595        ONLY:  bulk_cloud_model
596
597    USE chem_modules,                                                          &
598        ONLY:  max_pr_cs ! ToDo: this dependency needs to be removed cause it is ugly #new_dom
599
600    USE control_parameters
601
602    USE grid_variables,                                                        &
603        ONLY:  dx, dy, ddx2_mg, ddy2_mg
604
605    USE indices
606
607    USE kinds
608
609    USE lpm_init_mod,                                                          &
610        ONLY:  lpm_init
611 
612    USE lsf_nudging_mod,                                                       &
613        ONLY:  ls_forcing_surf
614
615    USE model_1d_mod,                                                          &
616        ONLY:  init_1d_model, l1d, u1d, v1d
617
618    USE module_interface,                                                      &
619        ONLY:  module_interface_init_arrays,                                   &
620               module_interface_init,                                          &
621               module_interface_init_checks
622
623    USE multi_agent_system_mod,                                                &
624        ONLY:  agents_active, mas_init
625
626    USE netcdf_interface,                                                      &
627        ONLY:  dots_max
628
629    USE netcdf_data_input_mod,                                                 &
630        ONLY:  init_3d,                              &
631               netcdf_data_input_init_3d, netcdf_data_input_interpolate
632
633    USE nesting_offl_mod,                                                      &
634        ONLY:  nesting_offl_init
635
636    USE particle_attributes,                                                   &
637        ONLY:  particle_advection
638
639    USE pegrid
640
641#if defined( __parallel )
642    USE pmc_interface,                                                         &
643        ONLY:  nested_run
644#endif
645
646    USE random_function_mod 
647
648    USE random_generator_parallel,                                             &
649        ONLY:  init_parallel_random_generator
650
651    USE read_restart_data_mod,                                                 &
652        ONLY:  rrd_read_parts_of_global, rrd_local
653
654    USE statistics,                                                            &
655        ONLY:  hom, hom_sum, mean_surface_level_height, pr_palm, rmask,        &
656               statistic_regions, sums, sums_divnew_l, sums_divold_l, sums_l,  &
657               sums_l_l, sums_wsts_bc_l, ts_value,                             &
658               weight_pres, weight_substep
659
660    USE synthetic_turbulence_generator_mod,                                    &
661        ONLY:  parametrize_inflow_turbulence, stg_adjust, stg_init,            &
662               use_syn_turb_gen
663
664    USE surface_layer_fluxes_mod,                                              &
665        ONLY:  init_surface_layer_fluxes
666
667    USE surface_mod,                                                           &
668        ONLY :  init_surface_arrays, init_surfaces, surf_def_h, surf_lsm_h,    &
669                surf_usm_h, get_topography_top_index_ji
670
671    USE surface_data_output_mod,                                               &
672        ONLY:  surface_data_output_init
673
674    USE transpose_indices
675
676    USE turbulence_closure_mod,                                                &
677        ONLY:  tcm_init_arrays, tcm_init
678
679    IMPLICIT NONE
680
681    INTEGER(iwp) ::  i             !< grid index in x direction
682    INTEGER(iwp) ::  ind_array(1)  !< dummy used to determine start index for external pressure forcing
683    INTEGER(iwp) ::  j             !< grid index in y direction
684    INTEGER(iwp) ::  k             !< grid index in z direction
685    INTEGER(iwp) ::  k_surf        !< surface level index
686    INTEGER(iwp) ::  m             !< index of surface element in surface data type
687    INTEGER(iwp) ::  sr            !< index of statistic region
688
689    INTEGER(iwp), DIMENSION(:), ALLOCATABLE   ::  ngp_2dh_l  !< toal number of horizontal grid points in statistical region on subdomain
690
691    INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE ::  ngp_2dh_outer_l    !< number of horizontal non-wall bounded grid points on subdomain
692    INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE ::  ngp_2dh_s_inner_l  !< number of horizontal non-topography grid points on subdomain
693
694    REAL(wp)     ::  t_surface !< air temperature at the surface
695
696    REAL(wp), DIMENSION(:), ALLOCATABLE ::  init_l        !< dummy array used for averaging 3D data to obtain inital profiles
697    REAL(wp), DIMENSION(:), ALLOCATABLE ::  p_hydrostatic !< hydrostatic pressure
698
699    INTEGER(iwp) ::  l       !< loop variable
700    INTEGER(iwp) ::  nzt_l   !< index of top PE boundary for multigrid level
701    REAL(wp) ::  dx_l !< grid spacing along x on different multigrid level
702    REAL(wp) ::  dy_l !< grid spacing along y on different multigrid level
703
704    REAL(wp), DIMENSION(1:3) ::  volume_flow_area_l     !< area of lateral and top model domain surface on local subdomain
705    REAL(wp), DIMENSION(1:3) ::  volume_flow_initial_l  !< initial volume flow into model domain
706
707    REAL(wp), DIMENSION(:), ALLOCATABLE ::  mean_surface_level_height_l !< mean surface level height on subdomain
708    REAL(wp), DIMENSION(:), ALLOCATABLE ::  ngp_3d_inner_l    !< total number of non-topography grid points on subdomain
709    REAL(wp), DIMENSION(:), ALLOCATABLE ::  ngp_3d_inner_tmp  !< total number of non-topography grid points
710
711    INTEGER(iwp) ::  nz_u_shift   !< topography-top index on u-grid, used to vertically shift initial profiles
712    INTEGER(iwp) ::  nz_v_shift   !< topography-top index on v-grid, used to vertically shift initial profiles
713    INTEGER(iwp) ::  nz_w_shift   !< topography-top index on w-grid, used to vertically shift initial profiles
714    INTEGER(iwp) ::  nz_s_shift   !< topography-top index on scalar-grid, used to vertically shift initial profiles
715    INTEGER(iwp) ::  nz_u_shift_l !< topography-top index on u-grid, used to vertically shift initial profiles
716    INTEGER(iwp) ::  nz_v_shift_l !< topography-top index on v-grid, used to vertically shift initial profiles
717    INTEGER(iwp) ::  nz_w_shift_l !< topography-top index on w-grid, used to vertically shift initial profiles
718    INTEGER(iwp) ::  nz_s_shift_l !< topography-top index on scalar-grid, used to vertically shift initial profiles
719
720    CALL location_message( 'allocating arrays', .FALSE. )
721!
722!-- Allocate arrays
723    ALLOCATE( mean_surface_level_height(0:statistic_regions),                  &
724              mean_surface_level_height_l(0:statistic_regions),                &
725              ngp_2dh(0:statistic_regions), ngp_2dh_l(0:statistic_regions),    &
726              ngp_3d(0:statistic_regions),                                     &
727              ngp_3d_inner(0:statistic_regions),                               &
728              ngp_3d_inner_l(0:statistic_regions),                             &
729              ngp_3d_inner_tmp(0:statistic_regions),                           &
730              sums_divnew_l(0:statistic_regions),                              &
731              sums_divold_l(0:statistic_regions) )
732    ALLOCATE( dp_smooth_factor(nzb:nzt), rdf(nzb+1:nzt), rdf_sc(nzb+1:nzt) )
733    ALLOCATE( ngp_2dh_outer(nzb:nzt+1,0:statistic_regions),                    &
734              ngp_2dh_outer_l(nzb:nzt+1,0:statistic_regions),                  &
735              ngp_2dh_s_inner(nzb:nzt+1,0:statistic_regions),                  &
736              ngp_2dh_s_inner_l(nzb:nzt+1,0:statistic_regions),                &
737              rmask(nysg:nyng,nxlg:nxrg,0:statistic_regions),                  &
738              sums(nzb:nzt+1,pr_palm+max_pr_user+max_pr_cs),                   &
739              sums_l(nzb:nzt+1,pr_palm+max_pr_user+max_pr_cs,0:threads_per_task-1),      &
740              sums_l_l(nzb:nzt+1,0:statistic_regions,0:threads_per_task-1),    &
741              sums_wsts_bc_l(nzb:nzt+1,0:statistic_regions) )
742    ALLOCATE( ts_value(dots_max,0:statistic_regions) )
743    ALLOCATE( ptdf_x(nxlg:nxrg), ptdf_y(nysg:nyng) )
744
745    ALLOCATE( d(nzb+1:nzt,nys:nyn,nxl:nxr),                                    &
746              p(nzb:nzt+1,nysg:nyng,nxlg:nxrg),                                &
747              tend(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
748
749    ALLOCATE( pt_1(nzb:nzt+1,nysg:nyng,nxlg:nxrg),                             &
750              pt_3(nzb:nzt+1,nysg:nyng,nxlg:nxrg),                             &
751              u_1(nzb:nzt+1,nysg:nyng,nxlg:nxrg),                              &
752              u_2(nzb:nzt+1,nysg:nyng,nxlg:nxrg),                              &
753              u_3(nzb:nzt+1,nysg:nyng,nxlg:nxrg),                              &
754              v_1(nzb:nzt+1,nysg:nyng,nxlg:nxrg),                              &
755              v_2(nzb:nzt+1,nysg:nyng,nxlg:nxrg),                              &
756              v_3(nzb:nzt+1,nysg:nyng,nxlg:nxrg),                              &
757              w_1(nzb:nzt+1,nysg:nyng,nxlg:nxrg),                              &
758              w_2(nzb:nzt+1,nysg:nyng,nxlg:nxrg),                              &
759              w_3(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
760    IF (  .NOT.  neutral )  THEN
761       ALLOCATE( pt_2(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
762    ENDIF
763!
764!-- Pre-set masks for regional statistics. Default is the total model domain.
765!-- Ghost points are excluded because counting values at the ghost boundaries
766!-- would bias the statistics
767    rmask = 1.0_wp
768    rmask(:,nxlg:nxl-1,:) = 0.0_wp;  rmask(:,nxr+1:nxrg,:) = 0.0_wp
769    rmask(nysg:nys-1,:,:) = 0.0_wp;  rmask(nyn+1:nyng,:,:) = 0.0_wp
770!
771!-- Following array is required for perturbation pressure within the iterative
772!-- pressure solvers. For the multistep schemes (Runge-Kutta), array p holds
773!-- the weighted average of the substeps and cannot be used in the Poisson
774!-- solver.
775    IF ( psolver == 'sor' )  THEN
776       ALLOCATE( p_loc(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
777    ELSEIF ( psolver(1:9) == 'multigrid' )  THEN
778!
779!--    For performance reasons, multigrid is using one ghost layer only
780       ALLOCATE( p_loc(nzb:nzt+1,nys-1:nyn+1,nxl-1:nxr+1) )
781    ENDIF
782
783!
784!-- Array for storing constant coeffficients of the tridiagonal solver
785    IF ( psolver == 'poisfft' )  THEN
786       ALLOCATE( tri(nxl_z:nxr_z,nys_z:nyn_z,0:nz-1,2) )
787       ALLOCATE( tric(nxl_z:nxr_z,nys_z:nyn_z,0:nz-1) )
788    ENDIF
789
790    IF ( humidity )  THEN
791!
792!--    3D-humidity
793       ALLOCATE( q_1(nzb:nzt+1,nysg:nyng,nxlg:nxrg),                           &
794                 q_2(nzb:nzt+1,nysg:nyng,nxlg:nxrg),                           &
795                 q_3(nzb:nzt+1,nysg:nyng,nxlg:nxrg),                           &
796                 vpt_1(nzb:nzt+1,nysg:nyng,nxlg:nxrg) ) 
797
798       IF ( cloud_droplets )  THEN
799!
800!--       Liquid water content, change in liquid water content
801          ALLOCATE ( ql_1(nzb:nzt+1,nysg:nyng,nxlg:nxrg),                      &
802                     ql_2(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
803!
804!--       Real volume of particles (with weighting), volume of particles
805          ALLOCATE ( ql_v(nzb:nzt+1,nysg:nyng,nxlg:nxrg),                      &
806                     ql_vp(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
807       ENDIF
808
809    ENDIF   
810   
811    IF ( passive_scalar )  THEN
812
813!
814!--    3D scalar arrays
815       ALLOCATE( s_1(nzb:nzt+1,nysg:nyng,nxlg:nxrg),                           &
816                 s_2(nzb:nzt+1,nysg:nyng,nxlg:nxrg),                           &
817                 s_3(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
818
819    ENDIF
820
821!
822!-- Allocate and set 1d-profiles for Stokes drift velocity. It may be set to
823!-- non-zero values later in ocean_init
824    ALLOCATE( u_stokes_zu(nzb:nzt+1), u_stokes_zw(nzb:nzt+1),                  &
825              v_stokes_zu(nzb:nzt+1), v_stokes_zw(nzb:nzt+1) )
826    u_stokes_zu(:) = 0.0_wp
827    u_stokes_zw(:) = 0.0_wp
828    v_stokes_zu(:) = 0.0_wp
829    v_stokes_zw(:) = 0.0_wp
830
831!
832!-- Allocation of anelastic and Boussinesq approximation specific arrays
833    ALLOCATE( p_hydrostatic(nzb:nzt+1) )
834    ALLOCATE( rho_air(nzb:nzt+1) )
835    ALLOCATE( rho_air_zw(nzb:nzt+1) )
836    ALLOCATE( drho_air(nzb:nzt+1) )
837    ALLOCATE( drho_air_zw(nzb:nzt+1) )
838!
839!-- Density profile calculation for anelastic approximation
840    t_surface = pt_surface * ( surface_pressure / 1000.0_wp )**( r_d / c_p )
841    IF ( TRIM( approximation ) == 'anelastic' ) THEN
842       DO  k = nzb, nzt+1
843          p_hydrostatic(k)    = surface_pressure * 100.0_wp *                  &
844                                ( 1 - ( g * zu(k) ) / ( c_p * t_surface )      &
845                                )**( c_p / r_d )
846          rho_air(k)          = ( p_hydrostatic(k) *                           &
847                                  ( 100000.0_wp / p_hydrostatic(k)             &
848                                  )**( r_d / c_p )                             &
849                                ) / ( r_d * pt_init(k) )
850       ENDDO
851       DO  k = nzb, nzt
852          rho_air_zw(k) = 0.5_wp * ( rho_air(k) + rho_air(k+1) )
853       ENDDO
854       rho_air_zw(nzt+1)  = rho_air_zw(nzt)                                    &
855                            + 2.0_wp * ( rho_air(nzt+1) - rho_air_zw(nzt)  )
856    ELSE
857       DO  k = nzb, nzt+1
858          p_hydrostatic(k)    = surface_pressure * 100.0_wp *                  &
859                                ( 1 - ( g * zu(nzb) ) / ( c_p * t_surface )    &
860                                )**( c_p / r_d )
861          rho_air(k)          = ( p_hydrostatic(k) *                           &
862                                  ( 100000.0_wp / p_hydrostatic(k)             &
863                                  )**( r_d / c_p )                             &
864                                ) / ( r_d * pt_init(nzb) )
865       ENDDO
866       DO  k = nzb, nzt
867          rho_air_zw(k) = 0.5_wp * ( rho_air(k) + rho_air(k+1) )
868       ENDDO
869       rho_air_zw(nzt+1)  = rho_air_zw(nzt)                                    &
870                            + 2.0_wp * ( rho_air(nzt+1) - rho_air_zw(nzt)  )
871    ENDIF
872!
873!-- compute the inverse density array in order to avoid expencive divisions
874    drho_air    = 1.0_wp / rho_air
875    drho_air_zw = 1.0_wp / rho_air_zw
876
877!
878!-- Allocation of flux conversion arrays
879    ALLOCATE( heatflux_input_conversion(nzb:nzt+1) )
880    ALLOCATE( waterflux_input_conversion(nzb:nzt+1) )
881    ALLOCATE( momentumflux_input_conversion(nzb:nzt+1) )
882    ALLOCATE( heatflux_output_conversion(nzb:nzt+1) )
883    ALLOCATE( waterflux_output_conversion(nzb:nzt+1) )
884    ALLOCATE( momentumflux_output_conversion(nzb:nzt+1) )
885
886!
887!-- calculate flux conversion factors according to approximation and in-/output mode
888    DO  k = nzb, nzt+1
889
890        IF ( TRIM( flux_input_mode ) == 'kinematic' )  THEN
891            heatflux_input_conversion(k)      = rho_air_zw(k)
892            waterflux_input_conversion(k)     = rho_air_zw(k)
893            momentumflux_input_conversion(k)  = rho_air_zw(k)
894        ELSEIF ( TRIM( flux_input_mode ) == 'dynamic' ) THEN
895            heatflux_input_conversion(k)      = 1.0_wp / c_p
896            waterflux_input_conversion(k)     = 1.0_wp / l_v
897            momentumflux_input_conversion(k)  = 1.0_wp
898        ENDIF
899
900        IF ( TRIM( flux_output_mode ) == 'kinematic' )  THEN
901            heatflux_output_conversion(k)     = drho_air_zw(k)
902            waterflux_output_conversion(k)    = drho_air_zw(k)
903            momentumflux_output_conversion(k) = drho_air_zw(k)
904        ELSEIF ( TRIM( flux_output_mode ) == 'dynamic' ) THEN
905            heatflux_output_conversion(k)     = c_p
906            waterflux_output_conversion(k)    = l_v
907            momentumflux_output_conversion(k) = 1.0_wp
908        ENDIF
909
910        IF ( .NOT. humidity ) THEN
911            waterflux_input_conversion(k)  = 1.0_wp
912            waterflux_output_conversion(k) = 1.0_wp
913        ENDIF
914
915    ENDDO
916
917!
918!-- In case of multigrid method, compute grid lengths and grid factors for the
919!-- grid levels with respective density on each grid
920    IF ( psolver(1:9) == 'multigrid' )  THEN
921
922       ALLOCATE( ddx2_mg(maximum_grid_level) )
923       ALLOCATE( ddy2_mg(maximum_grid_level) )
924       ALLOCATE( dzu_mg(nzb+1:nzt+1,maximum_grid_level) )
925       ALLOCATE( dzw_mg(nzb+1:nzt+1,maximum_grid_level) )
926       ALLOCATE( f1_mg(nzb+1:nzt,maximum_grid_level) )
927       ALLOCATE( f2_mg(nzb+1:nzt,maximum_grid_level) )
928       ALLOCATE( f3_mg(nzb+1:nzt,maximum_grid_level) )
929       ALLOCATE( rho_air_mg(nzb:nzt+1,maximum_grid_level) )
930       ALLOCATE( rho_air_zw_mg(nzb:nzt+1,maximum_grid_level) )
931
932       dzu_mg(:,maximum_grid_level) = dzu
933       rho_air_mg(:,maximum_grid_level) = rho_air
934!       
935!--    Next line to ensure an equally spaced grid.
936       dzu_mg(1,maximum_grid_level) = dzu(2)
937       rho_air_mg(nzb,maximum_grid_level) = rho_air(nzb) +                     &
938                                             (rho_air(nzb) - rho_air(nzb+1))
939
940       dzw_mg(:,maximum_grid_level) = dzw
941       rho_air_zw_mg(:,maximum_grid_level) = rho_air_zw
942       nzt_l = nzt
943       DO  l = maximum_grid_level-1, 1, -1
944           dzu_mg(nzb+1,l) = 2.0_wp * dzu_mg(nzb+1,l+1)
945           dzw_mg(nzb+1,l) = 2.0_wp * dzw_mg(nzb+1,l+1)
946           rho_air_mg(nzb,l)    = rho_air_mg(nzb,l+1) + (rho_air_mg(nzb,l+1) - rho_air_mg(nzb+1,l+1))
947           rho_air_zw_mg(nzb,l) = rho_air_zw_mg(nzb,l+1) + (rho_air_zw_mg(nzb,l+1) - rho_air_zw_mg(nzb+1,l+1))
948           rho_air_mg(nzb+1,l)    = rho_air_mg(nzb+1,l+1)
949           rho_air_zw_mg(nzb+1,l) = rho_air_zw_mg(nzb+1,l+1)
950           nzt_l = nzt_l / 2
951           DO  k = 2, nzt_l+1
952              dzu_mg(k,l) = dzu_mg(2*k-2,l+1) + dzu_mg(2*k-1,l+1)
953              dzw_mg(k,l) = dzw_mg(2*k-2,l+1) + dzw_mg(2*k-1,l+1)
954              rho_air_mg(k,l)    = rho_air_mg(2*k-1,l+1)
955              rho_air_zw_mg(k,l) = rho_air_zw_mg(2*k-1,l+1)
956           ENDDO
957       ENDDO
958
959       nzt_l = nzt
960       dx_l  = dx
961       dy_l  = dy
962       DO  l = maximum_grid_level, 1, -1
963          ddx2_mg(l) = 1.0_wp / dx_l**2
964          ddy2_mg(l) = 1.0_wp / dy_l**2
965          DO  k = nzb+1, nzt_l
966             f2_mg(k,l) = rho_air_zw_mg(k,l) / ( dzu_mg(k+1,l) * dzw_mg(k,l) )
967             f3_mg(k,l) = rho_air_zw_mg(k-1,l) / ( dzu_mg(k,l)   * dzw_mg(k,l) )
968             f1_mg(k,l) = 2.0_wp * ( ddx2_mg(l) + ddy2_mg(l) ) &
969                          * rho_air_mg(k,l) + f2_mg(k,l) + f3_mg(k,l)
970          ENDDO
971          nzt_l = nzt_l / 2
972          dx_l  = dx_l * 2.0_wp
973          dy_l  = dy_l * 2.0_wp
974       ENDDO
975
976    ENDIF
977
978!
979!-- 1D-array for large scale subsidence velocity
980    IF ( .NOT. ALLOCATED( w_subs ) )  THEN
981       ALLOCATE ( w_subs(nzb:nzt+1) )
982       w_subs = 0.0_wp
983    ENDIF
984
985!
986!-- Arrays to store velocity data from t-dt and the phase speeds which
987!-- are needed for radiation boundary conditions
988    IF ( bc_radiation_l )  THEN
989       ALLOCATE( u_m_l(nzb:nzt+1,nysg:nyng,1:2),                               &
990                 v_m_l(nzb:nzt+1,nysg:nyng,0:1),                               &
991                 w_m_l(nzb:nzt+1,nysg:nyng,0:1) )
992    ENDIF
993    IF ( bc_radiation_r )  THEN
994       ALLOCATE( u_m_r(nzb:nzt+1,nysg:nyng,nx-1:nx),                           &
995                 v_m_r(nzb:nzt+1,nysg:nyng,nx-1:nx),                           &
996                 w_m_r(nzb:nzt+1,nysg:nyng,nx-1:nx) )
997    ENDIF
998    IF ( bc_radiation_l  .OR.  bc_radiation_r )  THEN
999       ALLOCATE( c_u(nzb:nzt+1,nysg:nyng), c_v(nzb:nzt+1,nysg:nyng),           &
1000                 c_w(nzb:nzt+1,nysg:nyng) )
1001    ENDIF
1002    IF ( bc_radiation_s )  THEN
1003       ALLOCATE( u_m_s(nzb:nzt+1,0:1,nxlg:nxrg),                               &
1004                 v_m_s(nzb:nzt+1,1:2,nxlg:nxrg),                               &
1005                 w_m_s(nzb:nzt+1,0:1,nxlg:nxrg) )
1006    ENDIF
1007    IF ( bc_radiation_n )  THEN
1008       ALLOCATE( u_m_n(nzb:nzt+1,ny-1:ny,nxlg:nxrg),                           &
1009                 v_m_n(nzb:nzt+1,ny-1:ny,nxlg:nxrg),                           &
1010                 w_m_n(nzb:nzt+1,ny-1:ny,nxlg:nxrg) )
1011    ENDIF
1012    IF ( bc_radiation_s  .OR.  bc_radiation_n )  THEN
1013       ALLOCATE( c_u(nzb:nzt+1,nxlg:nxrg), c_v(nzb:nzt+1,nxlg:nxrg),           &
1014                 c_w(nzb:nzt+1,nxlg:nxrg) )
1015    ENDIF
1016    IF ( bc_radiation_l  .OR.  bc_radiation_r  .OR.  bc_radiation_s  .OR.      &
1017         bc_radiation_n )  THEN
1018       ALLOCATE( c_u_m_l(nzb:nzt+1), c_v_m_l(nzb:nzt+1), c_w_m_l(nzb:nzt+1) )                   
1019       ALLOCATE( c_u_m(nzb:nzt+1), c_v_m(nzb:nzt+1), c_w_m(nzb:nzt+1) )
1020    ENDIF
1021
1022!
1023!-- Initial assignment of the pointers
1024    IF ( .NOT. neutral )  THEN
1025       pt => pt_1;  pt_p => pt_2;  tpt_m => pt_3
1026    ELSE
1027       pt => pt_1;  pt_p => pt_1;  tpt_m => pt_3
1028    ENDIF
1029    u  => u_1;   u_p  => u_2;   tu_m  => u_3
1030    v  => v_1;   v_p  => v_2;   tv_m  => v_3
1031    w  => w_1;   w_p  => w_2;   tw_m  => w_3
1032
1033    IF ( humidity )  THEN
1034       q => q_1;  q_p => q_2;  tq_m => q_3
1035       vpt  => vpt_1
1036       IF ( cloud_droplets )  THEN
1037          ql   => ql_1
1038          ql_c => ql_2
1039       ENDIF
1040    ENDIF
1041   
1042    IF ( passive_scalar )  THEN
1043       s => s_1;  s_p => s_2;  ts_m => s_3
1044    ENDIF   
1045
1046!
1047!-- Initialize arrays for turbulence closure
1048    CALL tcm_init_arrays
1049!
1050!-- Initialize surface arrays
1051    CALL init_surface_arrays
1052!
1053!-- Allocate arrays for other modules
1054    CALL module_interface_init_arrays
1055
1056
1057!
1058!-- Allocate arrays containing the RK coefficient for calculation of
1059!-- perturbation pressure and turbulent fluxes. At this point values are
1060!-- set for pressure calculation during initialization (where no timestep
1061!-- is done). Further below the values needed within the timestep scheme
1062!-- will be set.
1063    ALLOCATE( weight_substep(1:intermediate_timestep_count_max),               &
1064              weight_pres(1:intermediate_timestep_count_max) )
1065    weight_substep = 1.0_wp
1066    weight_pres    = 1.0_wp
1067    intermediate_timestep_count = 0  ! needed when simulated_time = 0.0
1068       
1069    CALL location_message( 'finished', .TRUE. )
1070
1071!
1072!-- Initialize time series
1073    ts_value = 0.0_wp
1074
1075!
1076!-- Initialize local summation arrays for routine flow_statistics.
1077!-- This is necessary because they may not yet have been initialized when they
1078!-- are called from flow_statistics (or - depending on the chosen model run -
1079!-- are never initialized)
1080    sums_divnew_l      = 0.0_wp
1081    sums_divold_l      = 0.0_wp
1082    sums_l_l           = 0.0_wp
1083    sums_wsts_bc_l     = 0.0_wp
1084   
1085!
1086!-- Initialize model variables
1087    IF ( TRIM( initializing_actions ) /= 'read_restart_data'  .AND.            &
1088         TRIM( initializing_actions ) /= 'cyclic_fill' )  THEN
1089!
1090!--    Initialization with provided input data derived from larger-scale model
1091       IF ( INDEX( initializing_actions, 'inifor' ) /= 0 )  THEN
1092          CALL location_message( 'initializing with INIFOR', .FALSE. )
1093!
1094!--       Read initial 1D profiles or 3D data from NetCDF file, depending
1095!--       on the provided level-of-detail.
1096!--       At the moment, only u, v, w, pt and q are provided.
1097          CALL netcdf_data_input_init_3d
1098!
1099!--       Please note, Inifor provides data from nzb+1 to nzt.
1100!--       Bottom and top boundary conditions for Inifor profiles are already
1101!--       set (just after reading), so that this is not necessary here.
1102!--       Depending on the provided level-of-detail, initial Inifor data is
1103!--       either stored on data type (lod=1), or directly on 3D arrays (lod=2).
1104!--       In order to obtain also initial profiles in case of lod=2 (which
1105!--       is required for e.g. damping), average over 3D data.
1106          IF( init_3d%lod_u == 1 )  THEN
1107             u_init = init_3d%u_init
1108          ELSEIF( init_3d%lod_u == 2 )  THEN
1109             ALLOCATE( init_l(nzb:nzt+1) ) 
1110             DO  k = nzb, nzt+1
1111                init_l(k) = SUM( u(k,nys:nyn,nxl:nxr) )
1112             ENDDO
1113             init_l = init_l / REAL( ( nx + 1 ) * ( ny + 1 ), KIND = wp )
1114
1115#if defined( __parallel )
1116             CALL MPI_ALLREDUCE( init_l, u_init, nzt+1-nzb+1,                  &
1117                                 MPI_REAL, MPI_SUM, comm2d, ierr )
1118#else
1119             u_init = init_l
1120#endif
1121             DEALLOCATE( init_l )
1122
1123          ENDIF
1124           
1125          IF( init_3d%lod_v == 1 )  THEN 
1126             v_init = init_3d%v_init
1127          ELSEIF( init_3d%lod_v == 2 )  THEN
1128             ALLOCATE( init_l(nzb:nzt+1) ) 
1129             DO  k = nzb, nzt+1
1130                init_l(k) = SUM( v(k,nys:nyn,nxl:nxr) )
1131             ENDDO
1132             init_l = init_l / REAL( ( nx + 1 ) * ( ny + 1 ), KIND = wp )
1133
1134#if defined( __parallel )
1135             CALL MPI_ALLREDUCE( init_l, v_init, nzt+1-nzb+1,                  &
1136                                 MPI_REAL, MPI_SUM, comm2d, ierr )
1137#else
1138             v_init = init_l
1139#endif
1140             DEALLOCATE( init_l )
1141          ENDIF
1142          IF( .NOT. neutral )  THEN
1143             IF( init_3d%lod_pt == 1 )  THEN
1144                pt_init = init_3d%pt_init
1145             ELSEIF( init_3d%lod_pt == 2 )  THEN
1146                ALLOCATE( init_l(nzb:nzt+1) ) 
1147                DO  k = nzb, nzt+1
1148                   init_l(k) = SUM( pt(k,nys:nyn,nxl:nxr) )
1149                ENDDO
1150                init_l = init_l / REAL( ( nx + 1 ) * ( ny + 1 ), KIND = wp )
1151
1152#if defined( __parallel )
1153                CALL MPI_ALLREDUCE( init_l, pt_init, nzt+1-nzb+1,               &
1154                                    MPI_REAL, MPI_SUM, comm2d, ierr )
1155#else
1156                pt_init = init_l
1157#endif
1158                DEALLOCATE( init_l )
1159             ENDIF
1160          ENDIF
1161
1162
1163          IF( humidity )  THEN
1164             IF( init_3d%lod_q == 1 )  THEN
1165                q_init = init_3d%q_init
1166             ELSEIF( init_3d%lod_q == 2 )  THEN
1167                ALLOCATE( init_l(nzb:nzt+1) ) 
1168                DO  k = nzb, nzt+1
1169                   init_l(k) = SUM( q(k,nys:nyn,nxl:nxr) )
1170                ENDDO
1171                init_l = init_l / REAL( ( nx + 1 ) * ( ny + 1 ), KIND = wp )
1172
1173#if defined( __parallel )
1174                CALL MPI_ALLREDUCE( init_l, q_init, nzt+1-nzb+1,               &
1175                                    MPI_REAL, MPI_SUM, comm2d, ierr )
1176#else
1177                q_init = init_l
1178#endif
1179                DEALLOCATE( init_l )
1180             ENDIF
1181          ENDIF
1182
1183!
1184!--       Write initial profiles onto 3D arrays. Note, only in case of lod = 1,
1185!--       for lod = 2 data is already on 3D arrays.   
1186          DO  i = nxlg, nxrg
1187             DO  j = nysg, nyng
1188                IF( init_3d%lod_u == 1 )  u(:,j,i) = u_init(:)
1189                IF( init_3d%lod_v == 1 )  v(:,j,i) = v_init(:)
1190                IF( .NOT. neutral  .AND.  init_3d%lod_pt == 1 )                &
1191                   pt(:,j,i) = pt_init(:)
1192                IF( humidity  .AND.  init_3d%lod_q == 1 )  q(:,j,i) = q_init(:)
1193             ENDDO
1194          ENDDO
1195!
1196!--       Exchange ghost points in case of level-of-detail = 2
1197          IF( init_3d%lod_u == 2 )   CALL exchange_horiz( u, nbgp )
1198          IF( init_3d%lod_v == 2 )   CALL exchange_horiz( v, nbgp )
1199          IF( init_3d%lod_w == 2 )   CALL exchange_horiz( w, nbgp )
1200          IF( .NOT. neutral  .AND.  init_3d%lod_pt == 2 )                      &
1201             CALL exchange_horiz( pt, nbgp )
1202          IF( humidity  .AND.  init_3d%lod_q == 2 )                            &
1203             CALL exchange_horiz( q, nbgp )
1204!
1205!--       Set geostrophic wind components. 
1206          IF ( init_3d%from_file_ug )  THEN
1207             ug(:) = init_3d%ug_init(:)
1208          ENDIF
1209          IF ( init_3d%from_file_vg )  THEN
1210             vg(:) = init_3d%vg_init(:)
1211          ENDIF
1212!
1213!--       Set bottom and top boundary condition for geostrophic wind
1214          ug(nzt+1) = ug(nzt)
1215          vg(nzt+1) = vg(nzt)
1216          ug(nzb)   = ug(nzb+1)
1217          vg(nzb)   = vg(nzb+1)
1218!
1219!--       Set inital w to 0
1220          w = 0.0_wp
1221
1222          IF ( passive_scalar )  THEN
1223             DO  i = nxlg, nxrg
1224                DO  j = nysg, nyng
1225                   s(:,j,i) = s_init
1226                ENDDO
1227             ENDDO
1228          ENDIF
1229
1230!
1231!--       Set velocity components at non-atmospheric / oceanic grid points to
1232!--       zero.
1233          u = MERGE( u, 0.0_wp, BTEST( wall_flags_0, 1 ) )
1234          v = MERGE( v, 0.0_wp, BTEST( wall_flags_0, 2 ) )
1235          w = MERGE( w, 0.0_wp, BTEST( wall_flags_0, 3 ) )
1236!
1237!--       Initialize surface variables, e.g. friction velocity, momentum
1238!--       fluxes, etc.
1239          CALL init_surfaces
1240!
1241!--       Initialize turbulence generator
1242          IF( use_syn_turb_gen )  CALL stg_init
1243
1244          CALL location_message( 'finished', .TRUE. )
1245!
1246!--    Initialization via computed 1D-model profiles
1247       ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 )  THEN
1248
1249          CALL location_message( 'initializing with 1D model profiles', .FALSE. )
1250!
1251!--       Use solutions of the 1D model as initial profiles,
1252!--       start 1D model
1253          CALL init_1d_model
1254!
1255!--       Transfer initial profiles to the arrays of the 3D model
1256          DO  i = nxlg, nxrg
1257             DO  j = nysg, nyng
1258                pt(:,j,i) = pt_init
1259                u(:,j,i)  = u1d
1260                v(:,j,i)  = v1d
1261             ENDDO
1262          ENDDO
1263
1264          IF ( humidity )  THEN
1265             DO  i = nxlg, nxrg
1266                DO  j = nysg, nyng
1267                   q(:,j,i) = q_init
1268                ENDDO
1269             ENDDO
1270          ENDIF
1271
1272          IF ( passive_scalar )  THEN
1273             DO  i = nxlg, nxrg
1274                DO  j = nysg, nyng
1275                   s(:,j,i) = s_init
1276                ENDDO
1277             ENDDO   
1278          ENDIF
1279!
1280!--          Store initial profiles for output purposes etc.
1281          IF ( .NOT. constant_diffusion )  THEN
1282             hom(:,1,25,:) = SPREAD( l1d, 2, statistic_regions+1 )
1283          ENDIF
1284!
1285!--       Set velocities back to zero
1286          u = MERGE( u, 0.0_wp, BTEST( wall_flags_0, 1 ) )
1287          v = MERGE( v, 0.0_wp, BTEST( wall_flags_0, 2 ) )         
1288!
1289!--       WARNING: The extra boundary conditions set after running the
1290!--       -------  1D model impose an error on the divergence one layer
1291!--                below the topography; need to correct later
1292!--       ATTENTION: Provisional correction for Piacsek & Williams
1293!--       ---------  advection scheme: keep u and v zero one layer below
1294!--                  the topography.
1295          IF ( ibc_uv_b == 1 )  THEN
1296!
1297!--          Neumann condition
1298             DO  i = nxl-1, nxr+1
1299                DO  j = nys-1, nyn+1
1300                   u(nzb,j,i) = u(nzb+1,j,i)
1301                   v(nzb,j,i) = v(nzb+1,j,i)
1302                ENDDO
1303             ENDDO
1304
1305          ENDIF
1306!
1307!--       Initialize surface variables, e.g. friction velocity, momentum
1308!--       fluxes, etc.
1309          CALL init_surfaces
1310!
1311!--       Initialize synthetic turbulence generator if required
1312          IF( use_syn_turb_gen )  CALL stg_init
1313
1314          CALL location_message( 'finished', .TRUE. )
1315
1316       ELSEIF ( INDEX(initializing_actions, 'set_constant_profiles') /= 0 )    &
1317       THEN
1318
1319          CALL location_message( 'initializing with constant profiles', .FALSE. )
1320
1321!
1322!--       Use constructed initial profiles (velocity constant with height,
1323!--       temperature profile with constant gradient)
1324          DO  i = nxlg, nxrg
1325             DO  j = nysg, nyng
1326                pt(:,j,i) = pt_init
1327                u(:,j,i)  = u_init
1328                v(:,j,i)  = v_init
1329             ENDDO
1330          ENDDO
1331!
1332!--       Mask topography
1333          u = MERGE( u, 0.0_wp, BTEST( wall_flags_0, 1 ) )
1334          v = MERGE( v, 0.0_wp, BTEST( wall_flags_0, 2 ) )
1335!
1336!--       Set initial horizontal velocities at the lowest computational grid
1337!--       levels to zero in order to avoid too small time steps caused by the
1338!--       diffusion limit in the initial phase of a run (at k=1, dz/2 occurs
1339!--       in the limiting formula!).
1340!--       Please note, in case land- or urban-surface model is used and a
1341!--       spinup is applied, masking the lowest computational level is not
1342!--       possible as MOST as well as energy-balance parametrizations will not
1343!--       work with zero wind velocity.
1344          IF ( ibc_uv_b /= 1  .AND.  .NOT.  spinup )  THEN
1345             DO  i = nxlg, nxrg
1346                DO  j = nysg, nyng
1347                   DO  k = nzb, nzt
1348                      u(k,j,i) = MERGE( u(k,j,i), 0.0_wp,                      &
1349                                        BTEST( wall_flags_0(k,j,i), 20 ) )
1350                      v(k,j,i) = MERGE( v(k,j,i), 0.0_wp,                      &
1351                                        BTEST( wall_flags_0(k,j,i), 21 ) )
1352                   ENDDO
1353                ENDDO
1354             ENDDO
1355          ENDIF
1356
1357          IF ( humidity )  THEN
1358             DO  i = nxlg, nxrg
1359                DO  j = nysg, nyng
1360                   q(:,j,i) = q_init
1361                ENDDO
1362             ENDDO
1363          ENDIF
1364         
1365          IF ( passive_scalar )  THEN
1366             DO  i = nxlg, nxrg
1367                DO  j = nysg, nyng
1368                   s(:,j,i) = s_init
1369                ENDDO
1370             ENDDO
1371          ENDIF
1372
1373!
1374!--       Compute initial temperature field and other constants used in case
1375!--       of a sloping surface
1376          IF ( sloping_surface )  CALL init_slope
1377!
1378!--       Initialize surface variables, e.g. friction velocity, momentum
1379!--       fluxes, etc.
1380          CALL init_surfaces
1381!
1382!--       Initialize synthetic turbulence generator if required
1383          IF( use_syn_turb_gen )  CALL stg_init
1384         
1385          CALL location_message( 'finished', .TRUE. )
1386
1387       ELSEIF ( INDEX(initializing_actions, 'by_user') /= 0 )                  &
1388       THEN
1389
1390          CALL location_message( 'initializing by user', .FALSE. )
1391!
1392!--       Pre-initialize surface variables, i.e. setting start- and end-indices
1393!--       at each (j,i)-location. Please note, this does not supersede
1394!--       user-defined initialization of surface quantities.
1395          CALL init_surfaces
1396!
1397!--       Initialization will completely be done by the user
1398          CALL user_init_3d_model
1399
1400          CALL location_message( 'finished', .TRUE. )
1401
1402       ENDIF
1403
1404       CALL location_message( 'initializing statistics, boundary conditions, etc.', &
1405                              .FALSE. )
1406
1407!
1408!--    Bottom boundary
1409       IF ( ibc_uv_b == 0 .OR. ibc_uv_b == 2  )  THEN
1410          u(nzb,:,:) = 0.0_wp
1411          v(nzb,:,:) = 0.0_wp
1412       ENDIF
1413
1414!
1415!--    Apply channel flow boundary condition
1416       IF ( TRIM( bc_uv_t ) == 'dirichlet_0' )  THEN
1417          u(nzt+1,:,:) = 0.0_wp
1418          v(nzt+1,:,:) = 0.0_wp
1419       ENDIF
1420
1421!
1422!--    Calculate virtual potential temperature
1423       IF ( humidity )  vpt = pt * ( 1.0_wp + 0.61_wp * q )
1424
1425!
1426!--    Store initial profiles for output purposes etc.. Please note, in case of
1427!--    initialization of u, v, w, pt, and q via output data derived from larger
1428!--    scale models, data will not be horizontally homogeneous. Actually, a mean
1429!--    profile should be calculated before.   
1430       hom(:,1,5,:) = SPREAD( u(:,nys,nxl), 2, statistic_regions+1 )
1431       hom(:,1,6,:) = SPREAD( v(:,nys,nxl), 2, statistic_regions+1 )
1432       IF ( ibc_uv_b == 0 .OR. ibc_uv_b == 2)  THEN
1433          hom(nzb,1,5,:) = 0.0_wp
1434          hom(nzb,1,6,:) = 0.0_wp
1435       ENDIF
1436       hom(:,1,7,:)  = SPREAD( pt(:,nys,nxl), 2, statistic_regions+1 )
1437
1438       IF ( humidity )  THEN
1439!
1440!--       Store initial profile of total water content, virtual potential
1441!--       temperature
1442          hom(:,1,26,:) = SPREAD(   q(:,nys,nxl), 2, statistic_regions+1 )
1443          hom(:,1,29,:) = SPREAD( vpt(:,nys,nxl), 2, statistic_regions+1 )
1444!
1445!--       Store initial profile of mixing ratio and potential
1446!--       temperature
1447          IF ( bulk_cloud_model  .OR.  cloud_droplets ) THEN
1448             hom(:,1,27,:) = SPREAD(  q(:,nys,nxl), 2, statistic_regions+1 )
1449             hom(:,1,28,:) = SPREAD( pt(:,nys,nxl), 2, statistic_regions+1 )
1450          ENDIF
1451       ENDIF
1452
1453!
1454!--    Store initial scalar profile
1455       IF ( passive_scalar )  THEN
1456          hom(:,1,121,:) = SPREAD(  s(:,nys,nxl), 2, statistic_regions+1 )
1457       ENDIF
1458
1459!
1460!--    Initialize the random number generators (from numerical recipes)
1461       CALL random_function_ini
1462       
1463       IF ( random_generator == 'random-parallel' )  THEN
1464          CALL init_parallel_random_generator( nx, nys, nyn, nxl, nxr )
1465       ENDIF
1466!
1467!--    Set the reference state to be used in the buoyancy terms (for ocean runs
1468!--    the reference state will be set (overwritten) in init_ocean)
1469       IF ( use_single_reference_value )  THEN
1470          IF (  .NOT.  humidity )  THEN
1471             ref_state(:) = pt_reference
1472          ELSE
1473             ref_state(:) = vpt_reference
1474          ENDIF
1475       ELSE
1476          IF (  .NOT.  humidity )  THEN
1477             ref_state(:) = pt_init(:)
1478          ELSE
1479             ref_state(:) = vpt(:,nys,nxl)
1480          ENDIF
1481       ENDIF
1482
1483!
1484!--    For the moment, vertical velocity is zero
1485       w = 0.0_wp
1486
1487!
1488!--    Initialize array sums (must be defined in first call of pres)
1489       sums = 0.0_wp
1490
1491!
1492!--    In case of iterative solvers, p must get an initial value
1493       IF ( psolver(1:9) == 'multigrid'  .OR.  psolver == 'sor' )  p = 0.0_wp
1494!
1495!--    Impose vortex with vertical axis on the initial velocity profile
1496       IF ( INDEX( initializing_actions, 'initialize_vortex' ) /= 0 )  THEN
1497          CALL init_rankine
1498       ENDIF
1499
1500!
1501!--    Impose temperature anomaly (advection test only) or warm air bubble
1502!--    close to surface
1503       IF ( INDEX( initializing_actions, 'initialize_ptanom' ) /= 0  .OR.  &
1504            INDEX( initializing_actions, 'initialize_bubble' ) /= 0  )  THEN
1505          CALL init_pt_anomaly
1506       ENDIF
1507       
1508!
1509!--    If required, change the surface temperature at the start of the 3D run
1510       IF ( pt_surface_initial_change /= 0.0_wp )  THEN
1511          pt(nzb,:,:) = pt(nzb,:,:) + pt_surface_initial_change
1512       ENDIF
1513
1514!
1515!--    If required, change the surface humidity/scalar at the start of the 3D
1516!--    run
1517       IF ( humidity  .AND.  q_surface_initial_change /= 0.0_wp )              &
1518          q(nzb,:,:) = q(nzb,:,:) + q_surface_initial_change
1519         
1520       IF ( passive_scalar .AND.  s_surface_initial_change /= 0.0_wp )         &
1521          s(nzb,:,:) = s(nzb,:,:) + s_surface_initial_change
1522       
1523
1524!
1525!--    Initialize old and new time levels.
1526       tpt_m = 0.0_wp; tu_m = 0.0_wp; tv_m = 0.0_wp; tw_m = 0.0_wp
1527       pt_p = pt; u_p = u; v_p = v; w_p = w
1528
1529       IF ( humidity  )  THEN
1530          tq_m = 0.0_wp
1531          q_p = q
1532       ENDIF
1533       
1534       IF ( passive_scalar )  THEN
1535          ts_m = 0.0_wp
1536          s_p  = s
1537       ENDIF       
1538
1539       CALL location_message( 'finished', .TRUE. )
1540
1541    ELSEIF ( TRIM( initializing_actions ) == 'read_restart_data'  .OR.         &
1542             TRIM( initializing_actions ) == 'cyclic_fill' )                   &
1543    THEN
1544
1545       CALL location_message( 'initializing in case of restart / cyclic_fill', &
1546                              .FALSE. )
1547!
1548!--    Initialize surface elements and its attributes, e.g. heat- and
1549!--    momentumfluxes, roughness, scaling parameters. As number of surface
1550!--    elements might be different between runs, e.g. in case of cyclic fill,
1551!--    and not all surface elements are read, surface elements need to be
1552!--    initialized before.
1553!--    Please note, in case of cyclic fill, surfaces should be initialized
1554!--    after restart data is read, else, individual settings of surface
1555!--    parameters will be overwritten from data of precursor run, hence,
1556!--    init_surfaces is called a second time after reading the restart data.
1557       CALL init_surfaces                       
1558!
1559!--    When reading data for cyclic fill of 3D prerun data files, read
1560!--    some of the global variables from the restart file which are required
1561!--    for initializing the inflow
1562       IF ( TRIM( initializing_actions ) == 'cyclic_fill' )  THEN
1563
1564          DO  i = 0, io_blocks-1
1565             IF ( i == io_group )  THEN
1566                CALL rrd_read_parts_of_global
1567             ENDIF
1568#if defined( __parallel )
1569             CALL MPI_BARRIER( comm2d, ierr )
1570#endif
1571          ENDDO
1572
1573       ENDIF
1574
1575!
1576!--    Read processor specific binary data from restart file
1577       DO  i = 0, io_blocks-1
1578          IF ( i == io_group )  THEN
1579             CALL rrd_local
1580          ENDIF
1581#if defined( __parallel )
1582          CALL MPI_BARRIER( comm2d, ierr )
1583#endif
1584       ENDDO
1585!
1586!--    In case of cyclic fill, call init_surfaces a second time, so that
1587!--    surface properties such as heat fluxes are initialized as prescribed.
1588       IF ( TRIM( initializing_actions ) == 'cyclic_fill' )                    &
1589          CALL init_surfaces
1590
1591!
1592!--    In case of complex terrain and cyclic fill method as initialization,
1593!--    shift initial data in the vertical direction for each point in the
1594!--    x-y-plane depending on local surface height
1595       IF ( complex_terrain  .AND.                                             &
1596            TRIM( initializing_actions ) == 'cyclic_fill' )  THEN
1597          DO  i = nxlg, nxrg
1598             DO  j = nysg, nyng
1599                nz_u_shift = get_topography_top_index_ji( j, i, 'u' )
1600                nz_v_shift = get_topography_top_index_ji( j, i, 'v' )
1601                nz_w_shift = get_topography_top_index_ji( j, i, 'w' )
1602                nz_s_shift = get_topography_top_index_ji( j, i, 's' )
1603
1604                u(nz_u_shift:nzt+1,j,i)  = u(0:nzt+1-nz_u_shift,j,i)               
1605
1606                v(nz_v_shift:nzt+1,j,i)  = v(0:nzt+1-nz_v_shift,j,i)
1607
1608                w(nz_w_shift:nzt+1,j,i)  = w(0:nzt+1-nz_w_shift,j,i)
1609
1610                p(nz_s_shift:nzt+1,j,i)  =  p(0:nzt+1-nz_s_shift,j,i)
1611                pt(nz_s_shift:nzt+1,j,i) = pt(0:nzt+1-nz_s_shift,j,i)
1612             ENDDO
1613          ENDDO
1614       ENDIF
1615
1616!
1617!--    Initialization of the turbulence recycling method
1618       IF ( TRIM( initializing_actions ) == 'cyclic_fill'  .AND.               &
1619            turbulent_inflow )  THEN
1620!
1621!--       First store the profiles to be used at the inflow.
1622!--       These profiles are the (temporally) and horizontally averaged vertical
1623!--       profiles from the prerun. Alternatively, prescribed profiles
1624!--       for u,v-components can be used.
1625          ALLOCATE( mean_inflow_profiles(nzb:nzt+1,1:num_mean_inflow_profiles) )
1626
1627          IF ( use_prescribed_profile_data )  THEN
1628             mean_inflow_profiles(:,1) = u_init            ! u
1629             mean_inflow_profiles(:,2) = v_init            ! v
1630          ELSE
1631             mean_inflow_profiles(:,1) = hom_sum(:,1,0)    ! u
1632             mean_inflow_profiles(:,2) = hom_sum(:,2,0)    ! v
1633          ENDIF
1634          mean_inflow_profiles(:,4) = hom_sum(:,4,0)       ! pt
1635          IF ( humidity )                                                      &
1636             mean_inflow_profiles(:,6) = hom_sum(:,41,0)   ! q
1637          IF ( passive_scalar )                                                &
1638             mean_inflow_profiles(:,7) = hom_sum(:,115,0)   ! s
1639!
1640!--       In case of complex terrain, determine vertical displacement at inflow
1641!--       boundary and adjust mean inflow profiles
1642          IF ( complex_terrain )  THEN
1643             IF ( nxlg <= 0 .AND. nxrg >= 0 .AND. nysg <= 0 .AND. nyng >= 0 )  THEN
1644                nz_u_shift_l = get_topography_top_index_ji( 0, 0, 'u' )
1645                nz_v_shift_l = get_topography_top_index_ji( 0, 0, 'v' )
1646                nz_w_shift_l = get_topography_top_index_ji( 0, 0, 'w' )
1647                nz_s_shift_l = get_topography_top_index_ji( 0, 0, 's' )
1648             ELSE
1649                nz_u_shift_l = 0
1650                nz_v_shift_l = 0
1651                nz_w_shift_l = 0
1652                nz_s_shift_l = 0
1653             ENDIF
1654
1655#if defined( __parallel )
1656             CALL MPI_ALLREDUCE(nz_u_shift_l, nz_u_shift, 1, MPI_INTEGER,      &
1657                                MPI_MAX, comm2d, ierr)
1658             CALL MPI_ALLREDUCE(nz_v_shift_l, nz_v_shift, 1, MPI_INTEGER,      &
1659                                MPI_MAX, comm2d, ierr)
1660             CALL MPI_ALLREDUCE(nz_w_shift_l, nz_w_shift, 1, MPI_INTEGER,      & 
1661                                MPI_MAX, comm2d, ierr)
1662             CALL MPI_ALLREDUCE(nz_s_shift_l, nz_s_shift, 1, MPI_INTEGER,      &
1663                                MPI_MAX, comm2d, ierr)
1664#else
1665             nz_u_shift = nz_u_shift_l
1666             nz_v_shift = nz_v_shift_l
1667             nz_w_shift = nz_w_shift_l
1668             nz_s_shift = nz_s_shift_l
1669#endif
1670
1671             mean_inflow_profiles(:,1) = 0.0_wp
1672             mean_inflow_profiles(nz_u_shift:nzt+1,1) = hom_sum(0:nzt+1-nz_u_shift,1,0)  ! u
1673
1674             mean_inflow_profiles(:,2) = 0.0_wp
1675             mean_inflow_profiles(nz_v_shift:nzt+1,2) = hom_sum(0:nzt+1-nz_v_shift,2,0)  ! v
1676
1677             mean_inflow_profiles(nz_s_shift:nzt+1,4) = hom_sum(0:nzt+1-nz_s_shift,4,0)  ! pt
1678
1679          ENDIF
1680
1681!
1682!--       If necessary, adjust the horizontal flow field to the prescribed
1683!--       profiles
1684          IF ( use_prescribed_profile_data )  THEN
1685             DO  i = nxlg, nxrg
1686                DO  j = nysg, nyng
1687                   DO  k = nzb, nzt+1
1688                      u(k,j,i) = u(k,j,i) - hom_sum(k,1,0) + u_init(k)
1689                      v(k,j,i) = v(k,j,i) - hom_sum(k,2,0) + v_init(k)
1690                   ENDDO
1691                ENDDO
1692             ENDDO
1693          ENDIF
1694
1695!
1696!--       Use these mean profiles at the inflow (provided that Dirichlet
1697!--       conditions are used)
1698          IF ( bc_dirichlet_l )  THEN
1699             DO  j = nysg, nyng
1700                DO  k = nzb, nzt+1
1701                   u(k,j,nxlg:-1)  = mean_inflow_profiles(k,1)
1702                   v(k,j,nxlg:-1)  = mean_inflow_profiles(k,2)
1703                   w(k,j,nxlg:-1)  = 0.0_wp
1704                   pt(k,j,nxlg:-1) = mean_inflow_profiles(k,4)
1705                   IF ( humidity )                                             &
1706                      q(k,j,nxlg:-1)  = mean_inflow_profiles(k,6)
1707                   IF ( passive_scalar )                                       &
1708                      s(k,j,nxlg:-1)  = mean_inflow_profiles(k,7)                     
1709                ENDDO
1710             ENDDO
1711          ENDIF
1712
1713!
1714!--       Calculate the damping factors to be used at the inflow. For a
1715!--       turbulent inflow the turbulent fluctuations have to be limited
1716!--       vertically because otherwise the turbulent inflow layer will grow
1717!--       in time.
1718          IF ( inflow_damping_height == 9999999.9_wp )  THEN
1719!
1720!--          Default: use the inversion height calculated by the prerun; if
1721!--          this is zero, inflow_damping_height must be explicitly
1722!--          specified.
1723             IF ( hom_sum(nzb+6,pr_palm,0) /= 0.0_wp )  THEN
1724                inflow_damping_height = hom_sum(nzb+6,pr_palm,0)
1725             ELSE
1726                WRITE( message_string, * ) 'inflow_damping_height must be ',   &
1727                     'explicitly specified because&the inversion height ',     &
1728                     'calculated by the prerun is zero.'
1729                CALL message( 'init_3d_model', 'PA0318', 1, 2, 0, 6, 0 )
1730             ENDIF
1731
1732          ENDIF
1733
1734          IF ( inflow_damping_width == 9999999.9_wp )  THEN
1735!
1736!--          Default for the transition range: one tenth of the undamped
1737!--          layer
1738             inflow_damping_width = 0.1_wp * inflow_damping_height
1739
1740          ENDIF
1741
1742          ALLOCATE( inflow_damping_factor(nzb:nzt+1) )
1743
1744          DO  k = nzb, nzt+1
1745
1746             IF ( zu(k) <= inflow_damping_height )  THEN
1747                inflow_damping_factor(k) = 1.0_wp
1748             ELSEIF ( zu(k) <= ( inflow_damping_height + inflow_damping_width ) )  THEN
1749                inflow_damping_factor(k) = 1.0_wp -                            &
1750                                           ( zu(k) - inflow_damping_height ) / &
1751                                           inflow_damping_width
1752             ELSE
1753                inflow_damping_factor(k) = 0.0_wp
1754             ENDIF
1755
1756          ENDDO
1757
1758       ENDIF
1759
1760!
1761!--    Inside buildings set velocities back to zero
1762       IF ( TRIM( initializing_actions ) == 'cyclic_fill' .AND.                &
1763            topography /= 'flat' )  THEN
1764!
1765!--       Inside buildings set velocities back to zero.
1766!--       Other scalars (pt, q, s, p, sa, ...) are ignored at present,
1767!--       maybe revise later.
1768          DO  i = nxlg, nxrg
1769             DO  j = nysg, nyng
1770                DO  k = nzb, nzt
1771                   u(k,j,i)     = MERGE( u(k,j,i), 0.0_wp,                     &
1772                                         BTEST( wall_flags_0(k,j,i), 1 ) )
1773                   v(k,j,i)     = MERGE( v(k,j,i), 0.0_wp,                     &
1774                                         BTEST( wall_flags_0(k,j,i), 2 ) )
1775                   w(k,j,i)     = MERGE( w(k,j,i), 0.0_wp,                     &
1776                                         BTEST( wall_flags_0(k,j,i), 3 ) )
1777                ENDDO
1778             ENDDO
1779          ENDDO
1780
1781       ENDIF
1782
1783!
1784!--    Calculate initial temperature field and other constants used in case
1785!--    of a sloping surface
1786       IF ( sloping_surface )  CALL init_slope
1787
1788!
1789!--    Initialize new time levels (only done in order to set boundary values
1790!--    including ghost points)
1791       pt_p = pt; u_p = u; v_p = v; w_p = w
1792       IF ( humidity )  THEN
1793          q_p = q
1794       ENDIF
1795       IF ( passive_scalar )  s_p  = s
1796!
1797!--    Allthough tendency arrays are set in prognostic_equations, they have
1798!--    have to be predefined here because they are used (but multiplied with 0)
1799!--    there before they are set.
1800       tpt_m = 0.0_wp; tu_m = 0.0_wp; tv_m = 0.0_wp; tw_m = 0.0_wp
1801       IF ( humidity )  THEN
1802          tq_m = 0.0_wp
1803       ENDIF
1804       IF ( passive_scalar )  ts_m  = 0.0_wp
1805!
1806!--    Initialize synthetic turbulence generator in case of restart.
1807       IF ( TRIM( initializing_actions ) == 'read_restart_data'  .AND.         &
1808            use_syn_turb_gen )  CALL stg_init
1809
1810       CALL location_message( 'finished', .TRUE. )
1811
1812    ELSE
1813!
1814!--    Actually this part of the programm should not be reached
1815       message_string = 'unknown initializing problem'
1816       CALL message( 'init_3d_model', 'PA0193', 1, 2, 0, 6, 0 )
1817    ENDIF
1818
1819!
1820!-- Initialize TKE, Kh and Km
1821    CALL tcm_init
1822
1823
1824    IF (  TRIM( initializing_actions ) /= 'read_restart_data' )  THEN
1825!
1826!--    Initialize old timelevels needed for radiation boundary conditions
1827       IF ( bc_radiation_l )  THEN
1828          u_m_l(:,:,:) = u(:,:,1:2)
1829          v_m_l(:,:,:) = v(:,:,0:1)
1830          w_m_l(:,:,:) = w(:,:,0:1)
1831       ENDIF
1832       IF ( bc_radiation_r )  THEN
1833          u_m_r(:,:,:) = u(:,:,nx-1:nx)
1834          v_m_r(:,:,:) = v(:,:,nx-1:nx)
1835          w_m_r(:,:,:) = w(:,:,nx-1:nx)
1836       ENDIF
1837       IF ( bc_radiation_s )  THEN
1838          u_m_s(:,:,:) = u(:,0:1,:)
1839          v_m_s(:,:,:) = v(:,1:2,:)
1840          w_m_s(:,:,:) = w(:,0:1,:)
1841       ENDIF
1842       IF ( bc_radiation_n )  THEN
1843          u_m_n(:,:,:) = u(:,ny-1:ny,:)
1844          v_m_n(:,:,:) = v(:,ny-1:ny,:)
1845          w_m_n(:,:,:) = w(:,ny-1:ny,:)
1846       ENDIF
1847       
1848    ENDIF
1849
1850!
1851!-- Calculate the initial volume flow at the right and north boundary
1852    IF ( conserve_volume_flow )  THEN
1853
1854       IF ( use_prescribed_profile_data )  THEN
1855
1856          volume_flow_initial_l = 0.0_wp
1857          volume_flow_area_l    = 0.0_wp
1858
1859          IF ( nxr == nx )  THEN
1860             DO  j = nys, nyn
1861                DO  k = nzb+1, nzt
1862                   volume_flow_initial_l(1) = volume_flow_initial_l(1) +       &
1863                                              u_init(k) * dzw(k)               &
1864                                     * MERGE( 1.0_wp, 0.0_wp,                  &
1865                                              BTEST( wall_flags_0(k,j,nxr), 1 )&
1866                                            )
1867
1868                   volume_flow_area_l(1)    = volume_flow_area_l(1) + dzw(k)   &
1869                                     * MERGE( 1.0_wp, 0.0_wp,                  &
1870                                              BTEST( wall_flags_0(k,j,nxr), 1 )&
1871                                            )
1872                ENDDO
1873             ENDDO
1874          ENDIF
1875         
1876          IF ( nyn == ny )  THEN
1877             DO  i = nxl, nxr
1878                DO  k = nzb+1, nzt
1879                   volume_flow_initial_l(2) = volume_flow_initial_l(2) +       &
1880                                              v_init(k) * dzw(k)               &       
1881                                     * MERGE( 1.0_wp, 0.0_wp,                  &
1882                                              BTEST( wall_flags_0(k,nyn,i), 2 )&
1883                                            )
1884                   volume_flow_area_l(2)    = volume_flow_area_l(2) + dzw(k)   &       
1885                                     * MERGE( 1.0_wp, 0.0_wp,                  &
1886                                              BTEST( wall_flags_0(k,nyn,i), 2 )&
1887                                            )
1888                ENDDO
1889             ENDDO
1890          ENDIF
1891
1892#if defined( __parallel )
1893          CALL MPI_ALLREDUCE( volume_flow_initial_l(1), volume_flow_initial(1),&
1894                              2, MPI_REAL, MPI_SUM, comm2d, ierr )
1895          CALL MPI_ALLREDUCE( volume_flow_area_l(1), volume_flow_area(1),      &
1896                              2, MPI_REAL, MPI_SUM, comm2d, ierr )
1897
1898#else
1899          volume_flow_initial = volume_flow_initial_l
1900          volume_flow_area    = volume_flow_area_l
1901#endif 
1902
1903       ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' )  THEN
1904
1905          volume_flow_initial_l = 0.0_wp
1906          volume_flow_area_l    = 0.0_wp
1907
1908          IF ( nxr == nx )  THEN
1909             DO  j = nys, nyn
1910                DO  k = nzb+1, nzt
1911                   volume_flow_initial_l(1) = volume_flow_initial_l(1) +       &
1912                                              hom_sum(k,1,0) * dzw(k)          &
1913                                     * MERGE( 1.0_wp, 0.0_wp,                  &
1914                                              BTEST( wall_flags_0(k,j,nx), 1 ) &
1915                                            )
1916                   volume_flow_area_l(1)    = volume_flow_area_l(1) + dzw(k)   &
1917                                     * MERGE( 1.0_wp, 0.0_wp,                  &
1918                                              BTEST( wall_flags_0(k,j,nx), 1 ) &
1919                                            )
1920                ENDDO
1921             ENDDO
1922          ENDIF
1923         
1924          IF ( nyn == ny )  THEN
1925             DO  i = nxl, nxr
1926                DO  k = nzb+1, nzt
1927                   volume_flow_initial_l(2) = volume_flow_initial_l(2) +       &
1928                                              hom_sum(k,2,0) * dzw(k)          &       
1929                                     * MERGE( 1.0_wp, 0.0_wp,                  &
1930                                              BTEST( wall_flags_0(k,ny,i), 2 ) &
1931                                            )
1932                   volume_flow_area_l(2)    = volume_flow_area_l(2) + dzw(k)   &       
1933                                     * MERGE( 1.0_wp, 0.0_wp,                  &
1934                                              BTEST( wall_flags_0(k,ny,i), 2 ) &
1935                                            )
1936                ENDDO
1937             ENDDO
1938          ENDIF
1939
1940#if defined( __parallel )
1941          CALL MPI_ALLREDUCE( volume_flow_initial_l(1), volume_flow_initial(1),&
1942                              2, MPI_REAL, MPI_SUM, comm2d, ierr )
1943          CALL MPI_ALLREDUCE( volume_flow_area_l(1), volume_flow_area(1),      &
1944                              2, MPI_REAL, MPI_SUM, comm2d, ierr )
1945
1946#else
1947          volume_flow_initial = volume_flow_initial_l
1948          volume_flow_area    = volume_flow_area_l
1949#endif 
1950
1951       ELSEIF ( TRIM( initializing_actions ) /= 'read_restart_data' )  THEN
1952
1953          volume_flow_initial_l = 0.0_wp
1954          volume_flow_area_l    = 0.0_wp
1955
1956          IF ( nxr == nx )  THEN
1957             DO  j = nys, nyn
1958                DO  k = nzb+1, nzt
1959                   volume_flow_initial_l(1) = volume_flow_initial_l(1) +       &
1960                                              u(k,j,nx) * dzw(k)               &
1961                                     * MERGE( 1.0_wp, 0.0_wp,                  &
1962                                              BTEST( wall_flags_0(k,j,nx), 1 ) &
1963                                            )
1964                   volume_flow_area_l(1)    = volume_flow_area_l(1) + dzw(k)   &
1965                                     * MERGE( 1.0_wp, 0.0_wp,                  &
1966                                              BTEST( wall_flags_0(k,j,nx), 1 ) &
1967                                            )
1968                ENDDO
1969             ENDDO
1970          ENDIF
1971         
1972          IF ( nyn == ny )  THEN
1973             DO  i = nxl, nxr
1974                DO  k = nzb+1, nzt
1975                   volume_flow_initial_l(2) = volume_flow_initial_l(2) +       &
1976                                              v(k,ny,i) * dzw(k)               &       
1977                                     * MERGE( 1.0_wp, 0.0_wp,                  &
1978                                              BTEST( wall_flags_0(k,ny,i), 2 ) &
1979                                            )
1980                   volume_flow_area_l(2)    = volume_flow_area_l(2) + dzw(k)   &       
1981                                     * MERGE( 1.0_wp, 0.0_wp,                  &
1982                                              BTEST( wall_flags_0(k,ny,i), 2 ) &
1983                                            )
1984                ENDDO
1985             ENDDO
1986          ENDIF
1987
1988#if defined( __parallel )
1989          CALL MPI_ALLREDUCE( volume_flow_initial_l(1), volume_flow_initial(1),&
1990                              2, MPI_REAL, MPI_SUM, comm2d, ierr )
1991          CALL MPI_ALLREDUCE( volume_flow_area_l(1), volume_flow_area(1),      &
1992                              2, MPI_REAL, MPI_SUM, comm2d, ierr )
1993
1994#else
1995          volume_flow_initial = volume_flow_initial_l
1996          volume_flow_area    = volume_flow_area_l
1997#endif 
1998
1999       ENDIF
2000
2001!
2002!--    In case of 'bulk_velocity' mode, volume_flow_initial is calculated
2003!--    from u|v_bulk instead
2004       IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' )  THEN
2005          volume_flow_initial(1) = u_bulk * volume_flow_area(1)
2006          volume_flow_initial(2) = v_bulk * volume_flow_area(2)
2007       ENDIF
2008
2009    ENDIF
2010!
2011!-- Finally, if random_heatflux is set, disturb shf at horizontal
2012!-- surfaces. Actually, this should be done in surface_mod, where all other
2013!-- initializations of surface quantities are done. However, this
2014!-- would create a ring dependency, hence, it is done here. Maybe delete
2015!-- disturb_heatflux and tranfer the respective code directly into the
2016!-- initialization in surface_mod.         
2017    IF ( TRIM( initializing_actions ) /= 'read_restart_data'  .AND.            &
2018         TRIM( initializing_actions ) /= 'cyclic_fill' )  THEN
2019 
2020       IF ( use_surface_fluxes  .AND.  constant_heatflux  .AND.                &
2021            random_heatflux )  THEN
2022          IF ( surf_def_h(0)%ns >= 1 )  CALL disturb_heatflux( surf_def_h(0) )
2023          IF ( surf_lsm_h%ns    >= 1 )  CALL disturb_heatflux( surf_lsm_h    )
2024          IF ( surf_usm_h%ns    >= 1 )  CALL disturb_heatflux( surf_usm_h    )
2025       ENDIF
2026    ENDIF
2027
2028!
2029!-- Compute total sum of grid points and the mean surface level height for each
2030!-- statistic region. These are mainly used for horizontal averaging of
2031!-- turbulence statistics.
2032!-- ngp_2dh: number of grid points of a horizontal cross section through the
2033!--          respective statistic region
2034!-- ngp_3d:  number of grid points of the respective statistic region
2035    ngp_2dh_outer_l   = 0
2036    ngp_2dh_outer     = 0
2037    ngp_2dh_s_inner_l = 0
2038    ngp_2dh_s_inner   = 0
2039    ngp_2dh_l         = 0
2040    ngp_2dh           = 0
2041    ngp_3d_inner_l    = 0.0_wp
2042    ngp_3d_inner      = 0
2043    ngp_3d            = 0
2044    ngp_sums          = ( nz + 2 ) * ( pr_palm + max_pr_user )
2045
2046    mean_surface_level_height   = 0.0_wp
2047    mean_surface_level_height_l = 0.0_wp
2048!
2049!-- To do: New concept for these non-topography grid points!
2050    DO  sr = 0, statistic_regions
2051       DO  i = nxl, nxr
2052          DO  j = nys, nyn
2053             IF ( rmask(j,i,sr) == 1.0_wp )  THEN
2054!
2055!--             All xy-grid points
2056                ngp_2dh_l(sr) = ngp_2dh_l(sr) + 1
2057!
2058!--             Determine mean surface-level height. In case of downward-
2059!--             facing walls are present, more than one surface level exist.
2060!--             In this case, use the lowest surface-level height.
2061                IF ( surf_def_h(0)%start_index(j,i) <=                         &
2062                     surf_def_h(0)%end_index(j,i) )  THEN
2063                   m = surf_def_h(0)%start_index(j,i)
2064                   k = surf_def_h(0)%k(m)
2065                   mean_surface_level_height_l(sr) =                           &
2066                                       mean_surface_level_height_l(sr) + zw(k-1)
2067                ENDIF
2068                IF ( surf_lsm_h%start_index(j,i) <=                            &
2069                     surf_lsm_h%end_index(j,i) )  THEN
2070                   m = surf_lsm_h%start_index(j,i)
2071                   k = surf_lsm_h%k(m)
2072                   mean_surface_level_height_l(sr) =                           &
2073                                       mean_surface_level_height_l(sr) + zw(k-1)
2074                ENDIF
2075                IF ( surf_usm_h%start_index(j,i) <=                            &
2076                     surf_usm_h%end_index(j,i) )  THEN
2077                   m = surf_usm_h%start_index(j,i)
2078                   k = surf_usm_h%k(m)
2079                   mean_surface_level_height_l(sr) =                           &
2080                                       mean_surface_level_height_l(sr) + zw(k-1)
2081                ENDIF
2082
2083                k_surf = k - 1
2084
2085                DO  k = nzb, nzt+1
2086!
2087!--                xy-grid points above topography
2088                   ngp_2dh_outer_l(k,sr) = ngp_2dh_outer_l(k,sr)     +         &
2089                                  MERGE( 1, 0, BTEST( wall_flags_0(k,j,i), 24 ) )
2090
2091                   ngp_2dh_s_inner_l(k,sr) = ngp_2dh_s_inner_l(k,sr) +         &
2092                                  MERGE( 1, 0, BTEST( wall_flags_0(k,j,i), 22 ) )
2093
2094                ENDDO
2095!
2096!--             All grid points of the total domain above topography
2097                ngp_3d_inner_l(sr) = ngp_3d_inner_l(sr) + ( nz - k_surf + 2 )
2098
2099
2100
2101             ENDIF
2102          ENDDO
2103       ENDDO
2104    ENDDO
2105
2106    sr = statistic_regions + 1
2107#if defined( __parallel )
2108    IF ( collective_wait )  CALL MPI_BARRIER( comm2d, ierr )
2109    CALL MPI_ALLREDUCE( ngp_2dh_l(0), ngp_2dh(0), sr, MPI_INTEGER, MPI_SUM,    &
2110                        comm2d, ierr )
2111    IF ( collective_wait )  CALL MPI_BARRIER( comm2d, ierr )
2112    CALL MPI_ALLREDUCE( ngp_2dh_outer_l(0,0), ngp_2dh_outer(0,0), (nz+2)*sr,   &
2113                        MPI_INTEGER, MPI_SUM, comm2d, ierr )
2114    IF ( collective_wait )  CALL MPI_BARRIER( comm2d, ierr )
2115    CALL MPI_ALLREDUCE( ngp_2dh_s_inner_l(0,0), ngp_2dh_s_inner(0,0),          &
2116                        (nz+2)*sr, MPI_INTEGER, MPI_SUM, comm2d, ierr )
2117    IF ( collective_wait )  CALL MPI_BARRIER( comm2d, ierr )
2118    CALL MPI_ALLREDUCE( ngp_3d_inner_l(0), ngp_3d_inner_tmp(0), sr, MPI_REAL,  &
2119                        MPI_SUM, comm2d, ierr )
2120    ngp_3d_inner = INT( ngp_3d_inner_tmp, KIND = SELECTED_INT_KIND( 18 ) )
2121    IF ( collective_wait )  CALL MPI_BARRIER( comm2d, ierr )
2122    CALL MPI_ALLREDUCE( mean_surface_level_height_l(0),                        &
2123                        mean_surface_level_height(0), sr, MPI_REAL,            &
2124                        MPI_SUM, comm2d, ierr )
2125    mean_surface_level_height = mean_surface_level_height / REAL( ngp_2dh )
2126#else
2127    ngp_2dh         = ngp_2dh_l
2128    ngp_2dh_outer   = ngp_2dh_outer_l
2129    ngp_2dh_s_inner = ngp_2dh_s_inner_l
2130    ngp_3d_inner    = INT( ngp_3d_inner_l, KIND = SELECTED_INT_KIND( 18 ) )
2131    mean_surface_level_height = mean_surface_level_height_l / REAL( ngp_2dh_l )
2132#endif
2133
2134    ngp_3d = INT ( ngp_2dh, KIND = SELECTED_INT_KIND( 18 ) ) * &
2135             INT ( (nz + 2 ), KIND = SELECTED_INT_KIND( 18 ) )
2136
2137!
2138!-- Set a lower limit of 1 in order to avoid zero divisions in flow_statistics,
2139!-- buoyancy, etc. A zero value will occur for cases where all grid points of
2140!-- the respective subdomain lie below the surface topography
2141    ngp_2dh_outer   = MAX( 1, ngp_2dh_outer(:,:)   ) 
2142    ngp_3d_inner    = MAX( INT(1, KIND = SELECTED_INT_KIND( 18 )),             &
2143                           ngp_3d_inner(:) )
2144    ngp_2dh_s_inner = MAX( 1, ngp_2dh_s_inner(:,:) ) 
2145
2146    DEALLOCATE( mean_surface_level_height_l, ngp_2dh_l, ngp_2dh_outer_l,       &
2147                ngp_3d_inner_l, ngp_3d_inner_tmp )
2148!
2149!-- Initialize surface forcing corresponding to large-scale forcing. Therein,
2150!-- initialize heat-fluxes, etc. via datatype. Revise it later!
2151    IF ( large_scale_forcing .AND. lsf_surf )  THEN
2152       IF ( use_surface_fluxes  .AND.  constant_heatflux )  THEN
2153          CALL ls_forcing_surf ( simulated_time )
2154       ENDIF
2155    ENDIF
2156!
2157!-- Initializae 3D offline nesting in COSMO model and read data from
2158!-- external NetCDF file.
2159    IF ( nesting_offline )  CALL nesting_offl_init
2160!
2161!-- Initialize quantities for special advections schemes
2162    CALL init_advec
2163
2164!
2165!-- Impose random perturbation on the horizontal velocity field and then
2166!-- remove the divergences from the velocity field at the initial stage
2167    IF ( create_disturbances  .AND.  disturbance_energy_limit /= 0.0_wp  .AND. &
2168         TRIM( initializing_actions ) /= 'read_restart_data'  .AND.            &
2169         TRIM( initializing_actions ) /= 'cyclic_fill' )  THEN
2170
2171       CALL location_message( 'creating initial disturbances', .FALSE. )
2172       CALL disturb_field( 'u', tend, u )
2173       CALL disturb_field( 'v', tend, v )
2174       CALL location_message( 'finished', .TRUE. )
2175
2176       CALL location_message( 'calling pressure solver', .FALSE. )
2177       n_sor = nsor_ini
2178       CALL pres
2179       n_sor = nsor
2180       CALL location_message( 'finished', .TRUE. )
2181
2182    ENDIF
2183
2184!
2185!-- If required, initialize dvrp-software
2186    IF ( dt_dvrp /= 9999999.9_wp )  CALL init_dvrp
2187
2188!
2189!-- Initialize quantities for handling cloud physics.
2190!-- This routine must be called before lpm_init, becaus otherwise,
2191!-- array d_exner, needed in data_output_dvrp (called by lpm_init) is not defined.
2192    IF ( .NOT. ocean_mode )  THEN
2193
2194       ALLOCATE( hyp(nzb:nzt+1) )
2195       ALLOCATE( d_exner(nzb:nzt+1) )
2196       ALLOCATE( exner(nzb:nzt+1) )
2197       ALLOCATE( hyrho(nzb:nzt+1) )
2198!
2199!--    Check temperature in case of too large domain height
2200       DO  k = nzb, nzt+1
2201          IF ( ( pt_surface * exner_function(surface_pressure * 100.0_wp) - g/c_p * zu(k) ) < 0.0_wp )  THEN
2202             WRITE( message_string, * )  'absolute temperature < 0.0 at zu(', k, &
2203                                         ') = ', zu(k)
2204             CALL message( 'init_3d_model', 'PA0142', 1, 2, 0, 6, 0 )
2205          ENDIF
2206       ENDDO
2207
2208!
2209!--    Calculate vertical profile of the hydrostatic pressure (hyp)
2210       hyp    = barometric_formula(zu, pt_surface * exner_function(surface_pressure * 100.0_wp), surface_pressure * 100.0_wp)
2211       d_exner = exner_function_invers(hyp)
2212       exner = 1.0_wp / exner_function_invers(hyp)
2213       hyrho  = ideal_gas_law_rho_pt(hyp, pt_init)
2214!
2215!--    Compute reference density
2216       rho_surface = ideal_gas_law_rho(surface_pressure * 100.0_wp, pt_surface * exner_function(surface_pressure * 100.0_wp))
2217
2218    ENDIF
2219
2220!
2221!-- If required, initialize particles
2222    IF ( particle_advection )  CALL lpm_init
2223!
2224!-- If required, initialize particles
2225    IF ( agents_active )  CALL mas_init
2226!
2227!-- In case the synthetic turbulence generator does not have any information
2228!-- about the inflow turbulence, these information will be parametrized
2229!-- depending on the initial atmospheric conditions and surface properties.
2230!-- Please note, within pre-determined time intervals these turbulence
2231!-- information can be updated if desired.
2232    IF ( use_syn_turb_gen  .AND.  parametrize_inflow_turbulence )  THEN
2233       CALL stg_adjust
2234    ENDIF
2235!
2236!-- Initializing actions for all other modules
2237    CALL module_interface_init
2238!
2239!-- Initialize surface layer (done after LSM as roughness length are required
2240!-- for initialization
2241    IF ( constant_flux_layer )  CALL init_surface_layer_fluxes
2242!
2243!-- Initialize surface data output
2244    IF ( surface_output )  CALL surface_data_output_init
2245!
2246!-- Initialize the ws-scheme.   
2247    IF ( ws_scheme_sca .OR. ws_scheme_mom )  CALL ws_init
2248!
2249!-- Perform post-initializing checks for all other modules
2250    CALL module_interface_init_checks
2251
2252!
2253!-- Setting weighting factors for calculation of perturbation pressure
2254!-- and turbulent quantities from the RK substeps
2255    IF ( TRIM(timestep_scheme) == 'runge-kutta-3' )  THEN      ! for RK3-method
2256
2257       weight_substep(1) = 1._wp/6._wp
2258       weight_substep(2) = 3._wp/10._wp
2259       weight_substep(3) = 8._wp/15._wp
2260
2261       weight_pres(1)    = 1._wp/3._wp
2262       weight_pres(2)    = 5._wp/12._wp
2263       weight_pres(3)    = 1._wp/4._wp
2264
2265    ELSEIF ( TRIM(timestep_scheme) == 'runge-kutta-2' )  THEN  ! for RK2-method
2266
2267       weight_substep(1) = 1._wp/2._wp
2268       weight_substep(2) = 1._wp/2._wp
2269         
2270       weight_pres(1)    = 1._wp/2._wp
2271       weight_pres(2)    = 1._wp/2._wp       
2272
2273    ELSE                                     ! for Euler-method
2274
2275       weight_substep(1) = 1.0_wp     
2276       weight_pres(1)    = 1.0_wp                   
2277
2278    ENDIF
2279
2280!
2281!-- Initialize Rayleigh damping factors
2282    rdf    = 0.0_wp
2283    rdf_sc = 0.0_wp
2284    IF ( rayleigh_damping_factor /= 0.0_wp )  THEN
2285
2286       IF (  .NOT.  ocean_mode )  THEN
2287          DO  k = nzb+1, nzt
2288             IF ( zu(k) >= rayleigh_damping_height )  THEN
2289                rdf(k) = rayleigh_damping_factor *                             &
2290                      ( SIN( pi * 0.5_wp * ( zu(k) - rayleigh_damping_height ) &
2291                             / ( zu(nzt) - rayleigh_damping_height ) )         &
2292                      )**2
2293             ENDIF
2294          ENDDO
2295       ELSE
2296!
2297!--       In ocean mode, rayleigh damping is applied in the lower part of the
2298!--       model domain
2299          DO  k = nzt, nzb+1, -1
2300             IF ( zu(k) <= rayleigh_damping_height )  THEN
2301                rdf(k) = rayleigh_damping_factor *                             &
2302                      ( SIN( pi * 0.5_wp * ( rayleigh_damping_height - zu(k) ) &
2303                             / ( rayleigh_damping_height - zu(nzb+1) ) )       &
2304                      )**2
2305             ENDIF
2306          ENDDO
2307       ENDIF
2308
2309    ENDIF
2310    IF ( scalar_rayleigh_damping )  rdf_sc = rdf
2311
2312!
2313!-- Initialize the starting level and the vertical smoothing factor used for
2314!-- the external pressure gradient
2315    dp_smooth_factor = 1.0_wp
2316    IF ( dp_external )  THEN
2317!
2318!--    Set the starting level dp_level_ind_b only if it has not been set before
2319!--    (e.g. in init_grid).
2320       IF ( dp_level_ind_b == 0 )  THEN
2321          ind_array = MINLOC( ABS( dp_level_b - zu ) )
2322          dp_level_ind_b = ind_array(1) - 1 + nzb 
2323                                        ! MINLOC uses lower array bound 1
2324       ENDIF
2325       IF ( dp_smooth )  THEN
2326          dp_smooth_factor(:dp_level_ind_b) = 0.0_wp
2327          DO  k = dp_level_ind_b+1, nzt
2328             dp_smooth_factor(k) = 0.5_wp * ( 1.0_wp + SIN( pi *               &
2329                        ( REAL( k - dp_level_ind_b, KIND=wp ) /                &
2330                          REAL( nzt - dp_level_ind_b, KIND=wp ) - 0.5_wp ) ) )
2331          ENDDO
2332       ENDIF
2333    ENDIF
2334
2335!
2336!-- Initialize damping zone for the potential temperature in case of
2337!-- non-cyclic lateral boundaries. The damping zone has the maximum value
2338!-- at the inflow boundary and decreases to zero at pt_damping_width.
2339    ptdf_x = 0.0_wp
2340    ptdf_y = 0.0_wp
2341    IF ( bc_lr_dirrad )  THEN
2342       DO  i = nxl, nxr
2343          IF ( ( i * dx ) < pt_damping_width )  THEN
2344             ptdf_x(i) = pt_damping_factor * ( SIN( pi * 0.5_wp *              &
2345                            REAL( pt_damping_width - i * dx, KIND=wp ) / (     &
2346                            REAL( pt_damping_width, KIND=wp ) ) ) )**2 
2347          ENDIF
2348       ENDDO
2349    ELSEIF ( bc_lr_raddir )  THEN
2350       DO  i = nxl, nxr
2351          IF ( ( i * dx ) > ( nx * dx - pt_damping_width ) )  THEN
2352             ptdf_x(i) = pt_damping_factor *                                   &
2353                         SIN( pi * 0.5_wp *                                    &
2354                                 ( ( i - nx ) * dx + pt_damping_width ) /      &
2355                                 REAL( pt_damping_width, KIND=wp ) )**2
2356          ENDIF
2357       ENDDO 
2358    ELSEIF ( bc_ns_dirrad )  THEN
2359       DO  j = nys, nyn
2360          IF ( ( j * dy ) > ( ny * dy - pt_damping_width ) )  THEN
2361             ptdf_y(j) = pt_damping_factor *                                   &
2362                         SIN( pi * 0.5_wp *                                    &
2363                                 ( ( j - ny ) * dy + pt_damping_width ) /      &
2364                                 REAL( pt_damping_width, KIND=wp ) )**2
2365          ENDIF
2366       ENDDO 
2367    ELSEIF ( bc_ns_raddir )  THEN
2368       DO  j = nys, nyn
2369          IF ( ( j * dy ) < pt_damping_width )  THEN
2370             ptdf_y(j) = pt_damping_factor *                                   &
2371                         SIN( pi * 0.5_wp *                                    &
2372                                ( pt_damping_width - j * dy ) /                &
2373                                REAL( pt_damping_width, KIND=wp ) )**2
2374          ENDIF
2375       ENDDO
2376    ENDIF
2377
2378!
2379!-- Input binary data file is not needed anymore. This line must be placed
2380!-- after call of user_init!
2381    CALL close_file( 13 )
2382!
2383!-- In case of nesting, put an barrier to assure that all parent and child
2384!-- domains finished initialization.
2385#if defined( __parallel )
2386    IF ( nested_run )  CALL MPI_BARRIER( MPI_COMM_WORLD, ierr )
2387#endif
2388
2389
2390    CALL location_message( 'leaving init_3d_model', .TRUE. )
2391
2392 END SUBROUTINE init_3d_model
Note: See TracBrowser for help on using the repository browser.