Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 9

Last change on this file since 9 was 4, checked in by raasch, 18 years ago
Id keyword set as property for all *.f90 files
Property svn:keywords set to `Id`
File size: 53.8 KB

Line
1	SUBROUTINE header
2
3	!------------------------------------------------------------------------------!
4	! Actual revisions:
5	! -----------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: header.f90 4 2007-02-13 11:33:16Z raasch $
11	! RCS Log replace by Id keyword, revision history cleaned up
12	!
13	! Revision 1.63 2006/08/22 13:53:13 raasch
14	! Output of dz_max
15	!
16	! Revision 1.1 1997/08/11 06:17:20 raasch
17	! Initial revision
18	!
19	!
20	! Description:
21	! ------------
22	! Writing a header with all important informations about the actual run.
23	! This subroutine is called three times, two times at the beginning
24	! (writing information on files RUN_CONTROL and HEADER) and one time at the
25	! end of the run, then writing additional information about CPU-usage on file
26	! header.
27	!------------------------------------------------------------------------------!
28
29	USE arrays_3d
30	USE control_parameters
31	USE cloud_parameters
32	USE cpulog
33	USE dvrp_variables
34	USE grid_variables
35	USE indices
36	USE model_1d
37	USE particle_attributes
38	USE pegrid
39	USE spectrum
40
41	IMPLICIT NONE
42
43	CHARACTER (LEN=1) :: prec
44	CHARACTER (LEN=2) :: do2d_mode
45	CHARACTER (LEN=5) :: section_chr
46	CHARACTER (LEN=9) :: time_to_string
47	CHARACTER (LEN=10) :: coor_chr, host_chr
48	CHARACTER (LEN=16) :: begin_chr
49	CHARACTER (LEN=40) :: output_format
50	CHARACTER (LEN=70) :: char1, char2, coordinates, gradients, dopr_chr, &
51	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
52	run_classification, slices, temperatures, &
53	ugcomponent, vgcomponent
54	CHARACTER (LEN=85) :: roben, runten
55
56	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, i, ihost, io, j, l, ll
57	REAL :: cpuseconds_per_simulated_second
58
59	!
60	!-- Open the output file. At the end of the simulation, output is directed
61	!-- to unit 19.
62	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
63	.NOT. simulated_time_at_begin /= simulated_time ) THEN
64	io = 15 ! header output on file RUN_CONTROL
65	ELSE
66	io = 19 ! header output on file HEADER
67	ENDIF
68	CALL check_open( io )
69
70	!
71	!-- At the end of the run, output file (HEADER) will be rewritten with
72	!-- new informations
73	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
74
75	!
76	!-- Determine kind of model run
77	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
78	run_classification = '3D - restart run'
79	ELSE
80	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
81	run_classification = '3D - run without 1D - prerun'
82	ELSEIF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
83	run_classification = '3D - run with 1D - prerun'
84	ELSE
85	PRINT*,'+++ header: unknown action(s): ',initializing_actions
86	ENDIF
87	ENDIF
88
89	!
90	!-- Run-identification, date, time, host
91	host_chr = host(1:10)
92	WRITE ( io, 100 ) version, TRIM( run_classification ), run_date, &
93	run_identifier, run_time, runnr, ADJUSTR( host_chr )
94	#if defined( __parallel )
95	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
96	char1 = 'calculated'
97	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
98	host(1:2) == 'lc' ) .AND. &
99	npex == -1 .AND. pdims(2) == 1 ) THEN
100	char1 = 'forced'
101	ELSE
102	char1 = 'predefined'
103	ENDIF
104	IF ( threads_per_task == 1 ) THEN
105	WRITE ( io, 101 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
106	ELSE
107	WRITE ( io, 102 ) numprocs*threads_per_task, numprocs, &
108	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
109	ENDIF
110	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
111	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
112	npex == -1 .AND. pdims(2) == 1 ) &
113	THEN
114	WRITE ( io, 104 )
115	ELSEIF ( pdims(2) == 1 ) THEN
116	WRITE ( io, 105 ) 'x'
117	ELSEIF ( pdims(1) == 1 ) THEN
118	WRITE ( io, 105 ) 'y'
119	ENDIF
120	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 103 )
121	#endif
122	WRITE ( io, 99 )
123
124	!
125	!-- Numerical schemes
126	WRITE ( io, 110 )
127	IF ( psolver(1:7) == 'poisfft' ) THEN
128	WRITE ( io, 111 ) TRIM( fft_method )
129	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
130	ELSEIF ( psolver == 'sor' ) THEN
131	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
132	ELSEIF ( psolver == 'multigrid' ) THEN
133	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
134	IF ( mg_cycles == -1 ) THEN
135	WRITE ( io, 140 ) residual_limit
136	ELSE
137	WRITE ( io, 141 ) mg_cycles
138	ENDIF
139	IF ( mg_switch_to_pe0_level == 0 ) THEN
140	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
141	nzt_mg(1)
142	ELSE
143	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
144	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
145	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
146	nzt_mg(mg_switch_to_pe0_level), &
147	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
148	nzt_mg(1)
149	ENDIF
150	ENDIF
151	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
152	THEN
153	WRITE ( io, 142 )
154	ENDIF
155
156	IF ( momentum_advec == 'pw-scheme' ) THEN
157	WRITE ( io, 113 )
158	ELSE
159	WRITE ( io, 114 )
160	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
161	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
162	overshoot_limit_w /= 0.0 ) THEN
163	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
164	overshoot_limit_w
165	ENDIF
166	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
167	ups_limit_w /= 0.0 ) &
168	THEN
169	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
170	ENDIF
171	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
172	ENDIF
173	IF ( scalar_advec == 'pw-scheme' ) THEN
174	WRITE ( io, 116 )
175	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
176	WRITE ( io, 117 )
177	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
178	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
179	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
180	ENDIF
181	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
182	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
183	ENDIF
184	ELSE
185	WRITE ( io, 118 )
186	ENDIF
187	IF ( momentum_advec /= 'ups-scheme' .AND. scalar_advec /= 'ups-scheme' &
188	.AND. scalar_advec /= 'bc-scheme' .AND. host(1:3) /= 'nec' ) THEN
189	WRITE ( io, 139 )
190	ENDIF
191	IF ( galilei_transformation ) THEN
192	IF ( use_ug_for_galilei_tr ) THEN
193	char1 = 'geostrophic wind'
194	ELSE
195	char1 = 'mean wind in model domain'
196	ENDIF
197	IF ( simulated_time_at_begin == simulated_time ) THEN
198	char2 = 'at the start of the run'
199	ELSE
200	char2 = 'at the end of the run'
201	ENDIF
202	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
203	advected_distance_x/1000.0, advected_distance_y/1000.0
204	ENDIF
205	IF ( timestep_scheme == 'leapfrog' ) THEN
206	WRITE ( io, 120 )
207	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
208	WRITE ( io, 121 )
209	ELSE
210	WRITE ( io, 122 ) timestep_scheme
211	ENDIF
212	IF ( rayleigh_damping_factor /= 0.0 ) THEN
213	WRITE ( io, 123 ) rayleigh_damping_height, rayleigh_damping_factor
214	ENDIF
215	IF ( moisture ) THEN
216	IF ( .NOT. cloud_physics ) THEN
217	WRITE ( io, 129 )
218	ELSE
219	WRITE ( io, 130 )
220	WRITE ( io, 131 )
221	IF ( radiation ) WRITE ( io, 132 )
222	IF ( precipitation ) WRITE ( io, 133 )
223	ENDIF
224	ENDIF
225	IF ( passive_scalar ) WRITE ( io, 134 )
226	IF ( conserve_volume_flow ) WRITE ( io, 150 )
227	WRITE ( io, 99 )
228
229	!
230	!-- Runtime and timestep informations
231	WRITE ( io, 200 )
232	IF ( .NOT. dt_fixed ) THEN
233	WRITE ( io, 201 ) dt_max, cfl_factor
234	ELSE
235	WRITE ( io, 202 ) dt
236	ENDIF
237	WRITE ( io, 203 ) simulated_time_at_begin, end_time
238
239	IF ( time_restart /= 9999999.9 .AND. &
240	simulated_time_at_begin == simulated_time ) THEN
241	IF ( dt_restart == 9999999.9 ) THEN
242	WRITE ( io, 204 ) ' Restart at: ',time_restart
243	ELSE
244	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
245	ENDIF
246	ENDIF
247
248	IF ( simulated_time_at_begin /= simulated_time ) THEN
249	i = MAX ( log_point_s(10)%counts, 1 )
250	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
251	cpuseconds_per_simulated_second = 0.0
252	ELSE
253	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
254	( simulated_time - &
255	simulated_time_at_begin )
256	ENDIF
257	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
258	log_point_s(10)%sum / REAL( i ), &
259	cpuseconds_per_simulated_second
260	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
261	IF ( dt_restart == 9999999.9 ) THEN
262	WRITE ( io, 204 ) ' Next restart at: ',time_restart
263	ELSE
264	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
265	ENDIF
266	ENDIF
267	ENDIF
268
269	!
270	!-- Computational grid
271	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
272	IF ( dz_stretch_level_index < nzt+1 ) THEN
273	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
274	dz_stretch_factor, dz_max
275	ENDIF
276	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
277	MIN( nnz+2, nzt+2 )
278	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
279	WRITE ( io, 255 )
280	ELSE
281	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
282	ENDIF
283	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
284
285	!
286	!-- Topography
287	WRITE ( io, 270 ) topography
288	SELECT CASE ( TRIM( topography ) )
289
290	CASE ( 'flat' )
291	! no actions necessary
292
293	CASE ( 'single_building' )
294	blx = INT( building_length_x / dx )
295	bly = INT( building_length_y / dy )
296	bh = INT( building_height / dz )
297
298	IF ( building_wall_left == 9999999.9 ) THEN
299	building_wall_left = ( nx + 1 - blx ) / 2 * dx
300	ENDIF
301	bxl = INT ( building_wall_left / dx + 0.5 )
302	bxr = bxl + blx
303
304	IF ( building_wall_south == 9999999.9 ) THEN
305	building_wall_south = ( ny + 1 - bly ) / 2 * dy
306	ENDIF
307	bys = INT ( building_wall_south / dy + 0.5 )
308	byn = bys + bly
309
310	WRITE ( io, 271 ) building_length_x, building_length_y, &
311	building_height, bxl, bxr, bys, byn
312
313	END SELECT
314
315	!
316	!-- Boundary conditions
317	IF ( ibc_p_b == 0 ) THEN
318	runten = 'p(0) = 0 \|'
319	ELSEIF ( ibc_p_b == 1 ) THEN
320	runten = 'p(0) = p(1) \|'
321	ELSE
322	runten = 'p(0) = p(1) +R\|'
323	ENDIF
324	IF ( ibc_p_t == 0 ) THEN
325	roben = 'p(nzt+1) = 0 \|'
326	ELSE
327	roben = 'p(nzt+1) = p(nzt) \|'
328	ENDIF
329
330	IF ( ibc_uv_b == 0 ) THEN
331	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
332	ELSE
333	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
334	ENDIF
335	IF ( ibc_uv_t == 0 ) THEN
336	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
337	ELSE
338	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
339	ENDIF
340
341	IF ( ibc_pt_b == 0 ) THEN
342	runten = TRIM( runten ) // ' pt(0) = pt_surface'
343	ELSE
344	runten = TRIM( runten ) // ' pt(0) = pt(1)'
345	ENDIF
346	IF ( ibc_pt_t == 0 ) THEN
347	roben = TRIM( roben ) // ' pt(nzt) = pt_top'
348	ELSE
349	roben = TRIM( roben ) // ' pt(nzt) = pt(nzt-1) + dpt/dz'
350	ENDIF
351
352	WRITE ( io, 300 ) runten, roben
353
354	IF ( .NOT. constant_diffusion ) THEN
355	IF ( ibc_e_b == 1 ) THEN
356	runten = 'e(0) = e(1)'
357	ELSE
358	runten = 'e(0) = e(1) = (u/0.1)*2'
359	ENDIF
360	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
361
362	WRITE ( io, 301 ) runten, roben
363
364	ENDIF
365
366	IF ( moisture .OR. passive_scalar ) THEN
367	IF ( moisture ) THEN
368	IF ( ibc_q_b == 0 ) THEN
369	runten = 'q(0) = q_surface'
370	ELSE
371	runten = 'q(0) = q(1)'
372	ENDIF
373	IF ( ibc_q_t == 0 ) THEN
374	roben = 'q(nzt) = q_top'
375	ELSE
376	roben = 'q(nzt) = q(nzt-1) + dq/dz'
377	ENDIF
378	ELSE
379	IF ( ibc_q_b == 0 ) THEN
380	runten = 's(0) = s_surface'
381	ELSE
382	runten = 's(0) = s(1)'
383	ENDIF
384	IF ( ibc_q_t == 0 ) THEN
385	roben = 's(nzt) = s_top'
386	ELSE
387	roben = 's(nzt) = s(nzt-1) + ds/dz'
388	ENDIF
389	ENDIF
390
391	WRITE ( io, 302 ) runten, roben
392
393	ENDIF
394
395	IF ( use_surface_fluxes ) THEN
396	WRITE ( io, 303 )
397	IF ( constant_heatflux ) THEN
398	WRITE ( io, 306 ) surface_heatflux
399	IF ( random_heatflux ) WRITE ( io, 307 )
400	ENDIF
401	IF ( moisture .AND. constant_waterflux ) THEN
402	WRITE ( io, 311 ) surface_waterflux
403	ENDIF
404	IF ( passive_scalar .AND. constant_waterflux ) THEN
405	WRITE ( io, 313 ) surface_waterflux
406	ENDIF
407	ENDIF
408
409	IF ( prandtl_layer ) THEN
410	WRITE ( io, 305 ) zu(1), roughness_length, kappa, rif_min, rif_max
411	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
412	IF ( moisture .AND. .NOT. constant_waterflux ) THEN
413	WRITE ( io, 312 )
414	ENDIF
415	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
416	WRITE ( io, 314 )
417	ENDIF
418	ELSE
419	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
420	WRITE ( io, 310 ) rif_min, rif_max
421	ENDIF
422	ENDIF
423
424	WRITE ( io, 317 ) bc_lr, bc_ns
425	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
426	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
427	ENDIF
428
429	!
430	!-- Listing of 1D-profiles
431	WRITE ( io, 320 ) dt_dopr_listing
432	IF ( averaging_interval_pr /= 0.0 ) THEN
433	WRITE ( io, 321 ) averaging_interval_pr, dt_averaging_input_pr
434	ENDIF
435
436	!
437	!-- DATA output
438	WRITE ( io, 330 )
439	IF ( averaging_interval_pr /= 0.0 ) THEN
440	WRITE ( io, 321 ) averaging_interval_pr, dt_averaging_input_pr
441	ENDIF
442
443	!
444	!-- 1D-profiles
445	dopr_chr = 'Profile:'
446	IF ( dopr_n /= 0 ) THEN
447	WRITE ( io, 331 )
448
449	output_format = ''
450	IF ( netcdf_output ) THEN
451	IF ( netcdf_64bit ) THEN
452	output_format = 'netcdf (64 bit offset)'
453	ELSE
454	output_format = 'netcdf'
455	ENDIF
456	ENDIF
457	IF ( profil_output ) THEN
458	IF ( netcdf_output ) THEN
459	output_format = TRIM( output_format ) // ' and profil'
460	ELSE
461	output_format = 'profil'
462	ENDIF
463	ENDIF
464	WRITE ( io, 345 ) output_format
465
466	DO i = 1, dopr_n
467	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
468	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
469	WRITE ( io, 332 ) dopr_chr
470	dopr_chr = ' :'
471	ENDIF
472	ENDDO
473
474	IF ( dopr_chr /= '' ) THEN
475	WRITE ( io, 332 ) dopr_chr
476	ENDIF
477	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
478	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
479	ENDIF
480
481	!
482	!-- 2D-arrays
483	DO av = 0, 1
484
485	i = 1
486	do2d_xy = ''
487	do2d_xz = ''
488	do2d_yz = ''
489	DO WHILE ( do2d(av,i) /= ' ' )
490
491	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
492	do2d_mode = do2d(av,i)(l-1:l)
493
494	SELECT CASE ( do2d_mode )
495	CASE ( 'xy' )
496	ll = LEN_TRIM( do2d_xy )
497	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
498	CASE ( 'xz' )
499	ll = LEN_TRIM( do2d_xz )
500	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
501	CASE ( 'yz' )
502	ll = LEN_TRIM( do2d_yz )
503	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
504	END SELECT
505
506	i = i + 1
507
508	ENDDO
509
510	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
511	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
512	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
513	( netcdf_output .OR. iso2d_output ) ) THEN
514
515	IF ( av == 0 ) THEN
516	WRITE ( io, 334 ) ''
517	ELSE
518	WRITE ( io, 334 ) '(time-averaged)'
519	ENDIF
520
521	IF ( do2d_at_begin ) THEN
522	begin_chr = 'and at the start'
523	ELSE
524	begin_chr = ''
525	ENDIF
526
527	output_format = ''
528	IF ( netcdf_output ) THEN
529	IF ( netcdf_64bit ) THEN
530	output_format = 'netcdf (64 bit offset)'
531	ELSE
532	output_format = 'netcdf'
533	ENDIF
534	ENDIF
535	IF ( iso2d_output ) THEN
536	IF ( netcdf_output ) THEN
537	output_format = TRIM( output_format ) // ' and iso2d'
538	ELSE
539	output_format = 'iso2d'
540	ENDIF
541	ENDIF
542	WRITE ( io, 345 ) output_format
543
544	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
545	i = 1
546	slices = '/'
547	coordinates = '/'
548	!
549	!-- Building strings with index and coordinate informations of the
550	!-- slices
551	DO WHILE ( section(i,1) /= -9999 )
552
553	WRITE (section_chr,'(I5)') section(i,1)
554	section_chr = ADJUSTL( section_chr )
555	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
556
557	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
558	coor_chr = ADJUSTL( coor_chr )
559	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
560
561	i = i + 1
562	ENDDO
563	IF ( av == 0 ) THEN
564	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
565	TRIM( begin_chr ), 'k', TRIM( slices ), &
566	TRIM( coordinates )
567	IF ( skip_time_do2d_xy /= 0.0 ) THEN
568	WRITE ( io, 339 ) skip_time_do2d_xy
569	ENDIF
570	ELSE
571	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
572	TRIM( begin_chr ), averaging_interval, &
573	dt_averaging_input, 'k', TRIM( slices ), &
574	TRIM( coordinates )
575	IF ( skip_time_data_output_av /= 0.0 ) THEN
576	WRITE ( io, 339 ) skip_time_data_output_av
577	ENDIF
578	ENDIF
579
580	ENDIF
581
582	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
583	i = 1
584	slices = '/'
585	coordinates = '/'
586	!
587	!-- Building strings with index and coordinate informations of the
588	!-- slices
589	DO WHILE ( section(i,2) /= -9999 )
590
591	WRITE (section_chr,'(I5)') section(i,2)
592	section_chr = ADJUSTL( section_chr )
593	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
594
595	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
596	coor_chr = ADJUSTL( coor_chr )
597	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
598
599	i = i + 1
600	ENDDO
601	IF ( av == 0 ) THEN
602	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
603	TRIM( begin_chr ), 'j', TRIM( slices ), &
604	TRIM( coordinates )
605	IF ( skip_time_do2d_xz /= 0.0 ) THEN
606	WRITE ( io, 339 ) skip_time_do2d_xz
607	ENDIF
608	ELSE
609	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
610	TRIM( begin_chr ), averaging_interval, &
611	dt_averaging_input, 'j', TRIM( slices ), &
612	TRIM( coordinates )
613	IF ( skip_time_data_output_av /= 0.0 ) THEN
614	WRITE ( io, 339 ) skip_time_data_output_av
615	ENDIF
616	ENDIF
617	ENDIF
618
619	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
620	i = 1
621	slices = '/'
622	coordinates = '/'
623	!
624	!-- Building strings with index and coordinate informations of the
625	!-- slices
626	DO WHILE ( section(i,3) /= -9999 )
627
628	WRITE (section_chr,'(I5)') section(i,3)
629	section_chr = ADJUSTL( section_chr )
630	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
631
632	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
633	coor_chr = ADJUSTL( coor_chr )
634	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
635
636	i = i + 1
637	ENDDO
638	IF ( av == 0 ) THEN
639	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
640	TRIM( begin_chr ), 'i', TRIM( slices ), &
641	TRIM( coordinates )
642	IF ( skip_time_do2d_yz /= 0.0 ) THEN
643	WRITE ( io, 339 ) skip_time_do2d_yz
644	ENDIF
645	ELSE
646	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
647	TRIM( begin_chr ), averaging_interval, &
648	dt_averaging_input, 'i', TRIM( slices ), &
649	TRIM( coordinates )
650	IF ( skip_time_data_output_av /= 0.0 ) THEN
651	WRITE ( io, 339 ) skip_time_data_output_av
652	ENDIF
653	ENDIF
654	ENDIF
655
656	ENDIF
657
658	ENDDO
659
660	!
661	!-- 3d-arrays
662	DO av = 0, 1
663
664	i = 1
665	do3d_chr = ''
666	DO WHILE ( do3d(av,i) /= ' ' )
667
668	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
669	i = i + 1
670
671	ENDDO
672
673	IF ( do3d_chr /= '' ) THEN
674	IF ( av == 0 ) THEN
675	WRITE ( io, 336 ) ''
676	ELSE
677	WRITE ( io, 336 ) '(time-averaged)'
678	ENDIF
679
680	output_format = ''
681	IF ( netcdf_output ) THEN
682	IF ( netcdf_64bit ) THEN
683	output_format = 'netcdf (64 bit offset)'
684	ELSE
685	output_format = 'netcdf'
686	ENDIF
687	ENDIF
688	IF ( avs_output ) THEN
689	IF ( netcdf_output ) THEN
690	output_format = TRIM( output_format ) // ' and avs'
691	ELSE
692	output_format = 'avs'
693	ENDIF
694	ENDIF
695	WRITE ( io, 345 ) output_format
696
697	IF ( do3d_at_begin ) THEN
698	begin_chr = 'and at the start'
699	ELSE
700	begin_chr = ''
701	ENDIF
702	IF ( av == 0 ) THEN
703	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
704	zu(nz_do3d), nz_do3d
705	ELSE
706	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
707	TRIM( begin_chr ), averaging_interval, &
708	dt_averaging_input, zu(nz_do3d), nz_do3d
709	ENDIF
710
711	IF ( do3d_compress ) THEN
712	do3d_chr = ''
713	i = 1
714	DO WHILE ( do3d(av,i) /= ' ' )
715
716	SELECT CASE ( do3d(av,i) )
717	CASE ( 'u' )
718	j = 1
719	CASE ( 'v' )
720	j = 2
721	CASE ( 'w' )
722	j = 3
723	CASE ( 'p' )
724	j = 4
725	CASE ( 'pt' )
726	j = 5
727	END SELECT
728	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
729	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
730	':' // prec // ','
731	i = i + 1
732
733	ENDDO
734	WRITE ( io, 338 ) do3d_chr
735
736	ENDIF
737
738	IF ( av == 0 ) THEN
739	IF ( skip_time_do3d /= 0.0 ) THEN
740	WRITE ( io, 339 ) skip_time_do3d
741	ENDIF
742	ELSE
743	IF ( skip_time_data_output_av /= 0.0 ) THEN
744	WRITE ( io, 339 ) skip_time_data_output_av
745	ENDIF
746	ENDIF
747
748	ENDIF
749
750	ENDDO
751
752	!
753	!-- Timeseries
754	IF ( dt_dots /= 9999999.9 ) THEN
755	WRITE ( io, 340 )
756
757	output_format = ''
758	IF ( netcdf_output ) THEN
759	IF ( netcdf_64bit ) THEN
760	output_format = 'netcdf (64 bit offset)'
761	ELSE
762	output_format = 'netcdf'
763	ENDIF
764	ENDIF
765	IF ( profil_output ) THEN
766	IF ( netcdf_output ) THEN
767	output_format = TRIM( output_format ) // ' and profil'
768	ELSE
769	output_format = 'profil'
770	ENDIF
771	ENDIF
772	WRITE ( io, 345 ) output_format
773	WRITE ( io, 341 ) dt_dots
774	ENDIF
775
776	#if defined( __dvrp_graphics )
777	!
778	!-- Dvrp-output
779	IF ( dt_dvrp /= 9999999.9 ) THEN
780	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
781	TRIM( dvrp_username ), TRIM( dvrp_directory )
782	i = 1
783	l = 0
784	DO WHILE ( mode_dvrp(i) /= ' ' )
785	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
786	READ ( mode_dvrp(i), '(10X,I1)' ) j
787	l = l + 1
788	IF ( do3d(0,j) /= ' ' ) THEN
789	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l)
790	ENDIF
791	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
792	READ ( mode_dvrp(i), '(6X,I1)' ) j
793	IF ( do2d(0,j) /= ' ' ) WRITE ( io, 362 ) TRIM( do2d(0,j) )
794	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
795	WRITE ( io, 363 )
796	ENDIF
797	i = i + 1
798	ENDDO
799	ENDIF
800	#endif
801
802	#if defined( __spectra )
803	!
804	!-- Spectra output
805	IF ( dt_dosp /= 9999999.9 ) THEN
806	WRITE ( io, 370 )
807
808	output_format = ''
809	IF ( netcdf_output ) THEN
810	IF ( netcdf_64bit ) THEN
811	output_format = 'netcdf (64 bit offset)'
812	ELSE
813	output_format = 'netcdf'
814	ENDIF
815	ENDIF
816	IF ( profil_output ) THEN
817	IF ( netcdf_output ) THEN
818	output_format = TRIM( output_format ) // ' and profil'
819	ELSE
820	output_format = 'profil'
821	ENDIF
822	ENDIF
823	WRITE ( io, 345 ) output_format
824	WRITE ( io, 371 ) dt_dosp
825	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
826	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
827	( spectra_direction(i), i = 1,10 ), &
828	( comp_spectra_level(i), i = 1,10 ), &
829	( plot_spectra_level(i), i = 1,10 ), &
830	averaging_interval_sp, dt_averaging_input_pr
831	ENDIF
832	#endif
833
834	WRITE ( io, 99 )
835
836	!
837	!-- Physical quantities
838	WRITE ( io, 400 )
839
840	!
841	!-- Geostrophic parameters
842	WRITE ( io, 410 ) omega, phi, f, fs
843
844	!
845	!-- Other quantities
846	WRITE ( io, 411 ) g
847
848	!
849	!-- Cloud physics parameters
850	IF ( cloud_physics ) THEN
851	WRITE ( io, 412 )
852	WRITE ( io, 413 ) surface_pressure, r_d, rho_surface, cp, l_v
853	ENDIF
854
855	!-- Profile of the geostrophic wind (component ug)
856	!-- Building output strings
857	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
858	gradients = '------'
859	slices = ' 0'
860	coordinates = ' 0.0'
861	i = 1
862	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
863
864	WRITE (coor_chr,'(F6.2,4X)') ug(ug_vertical_gradient_level_ind(i))
865	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
866
867	WRITE (coor_chr,'(F6.2,4X)') ug_vertical_gradient(i)
868	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
869
870	WRITE (coor_chr,'(I6,4X)') ug_vertical_gradient_level_ind(i)
871	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
872
873	WRITE (coor_chr,'(F6.1,4X)') ug_vertical_gradient_level(i)
874	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
875
876	i = i + 1
877	ENDDO
878
879	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
880	TRIM( gradients ), TRIM( slices )
881
882	!-- Profile of the geostrophic wind (component vg)
883	!-- Building output strings
884	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
885	gradients = '------'
886	slices = ' 0'
887	coordinates = ' 0.0'
888	i = 1
889	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
890
891	WRITE (coor_chr,'(F6.2,4X)') vg(vg_vertical_gradient_level_ind(i))
892	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
893
894	WRITE (coor_chr,'(F6.2,4X)') vg_vertical_gradient(i)
895	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
896
897	WRITE (coor_chr,'(I6,4X)') vg_vertical_gradient_level_ind(i)
898	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
899
900	WRITE (coor_chr,'(F6.1,4X)') vg_vertical_gradient_level(i)
901	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
902
903	i = i + 1
904	ENDDO
905
906	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
907	TRIM( gradients ), TRIM( slices )
908
909	!
910	!-- Initial temperature profile
911	!-- Building output strings, starting with surface temperature
912	WRITE ( temperatures, '(F6.2)' ) pt_surface
913	gradients = '------'
914	slices = ' 0'
915	coordinates = ' 0.0'
916	i = 1
917	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
918
919	WRITE (coor_chr,'(F6.2,4X)') pt_init(pt_vertical_gradient_level_ind(i))
920	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
921
922	WRITE (coor_chr,'(F6.2,4X)') pt_vertical_gradient(i)
923	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
924
925	WRITE (coor_chr,'(I6,4X)') pt_vertical_gradient_level_ind(i)
926	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
927
928	WRITE (coor_chr,'(F6.1,4X)') pt_vertical_gradient_level(i)
929	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
930
931	i = i + 1
932	ENDDO
933
934	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
935	TRIM( gradients ), TRIM( slices )
936
937	!
938	!-- Initial humidity profile
939	!-- Building output strings, starting with surface humidity
940	IF ( moisture .OR. passive_scalar ) THEN
941	WRITE ( temperatures, '(E8.1)' ) q_surface
942	gradients = '--------'
943	slices = ' 0'
944	coordinates = ' 0.0'
945	i = 1
946	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
947
948	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
949	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
950
951	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
952	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
953
954	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
955	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
956
957	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
958	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
959
960	i = i + 1
961	ENDDO
962
963	IF ( moisture ) THEN
964	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
965	TRIM( gradients ), TRIM( slices )
966	ELSE
967	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
968	TRIM( gradients ), TRIM( slices )
969	ENDIF
970	ENDIF
971
972	!
973	!-- LES / turbulence parameters
974	WRITE ( io, 450 )
975
976	!--
977	! ... LES-constants used must still be added here
978	!--
979	IF ( constant_diffusion ) THEN
980	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
981	prandtl_number
982	ENDIF
983	IF ( .NOT. constant_diffusion) THEN
984	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
985	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
986	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
987	ENDIF
988
989	!
990	!-- Special actions during the run
991	WRITE ( io, 470 )
992	IF ( create_disturbances ) THEN
993	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
994	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
995	zu(disturbance_level_ind_t), disturbance_level_ind_t
996	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
997	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
998	ELSE
999	WRITE ( io, 473 ) disturbance_energy_limit
1000	ENDIF
1001	WRITE ( io, 474 ) TRIM( random_generator )
1002	ENDIF
1003	IF ( pt_surface_initial_change /= 0.0 ) THEN
1004	WRITE ( io, 475 ) pt_surface_initial_change
1005	ENDIF
1006	IF ( moisture .AND. q_surface_initial_change /= 0.0 ) THEN
1007	WRITE ( io, 476 ) q_surface_initial_change
1008	ENDIF
1009	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
1010	WRITE ( io, 477 ) q_surface_initial_change
1011	ENDIF
1012
1013	#if defined( __particles )
1014	!
1015	!-- Particle attributes
1016	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
1017	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
1018	end_time_prel
1019	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
1020	IF ( random_start_position ) WRITE ( io, 481 )
1021	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
1022	WRITE ( io, 495 ) total_number_of_particles
1023	IF ( .NOT. vertical_particle_advection ) WRITE ( io, 482 )
1024	IF ( maximum_number_of_tailpoints /= 0 ) THEN
1025	WRITE ( io, 483 ) maximum_number_of_tailpoints
1026	IF ( minimum_tailpoint_distance /= 0 ) THEN
1027	WRITE ( io, 484 ) total_number_of_tails, minimum_tailpoint_distance,&
1028	maximum_tailpoint_age
1029	ENDIF
1030	ENDIF
1031	IF ( dt_write_particle_data /= 9999999.9 ) THEN
1032	WRITE ( io, 485 ) dt_write_particle_data
1033	output_format = ''
1034	IF ( netcdf_output ) THEN
1035	IF ( netcdf_64bit ) THEN
1036	output_format = 'netcdf (64 bit offset) and binary'
1037	ELSE
1038	output_format = 'netcdf and binary'
1039	ENDIF
1040	ELSE
1041	output_format = 'binary'
1042	ENDIF
1043	WRITE ( io, 345 ) output_format
1044	ENDIF
1045	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
1046	IF ( write_particle_statistics ) WRITE ( io, 486 )
1047
1048	WRITE ( io, 487 ) number_of_particle_groups
1049
1050	DO i = 1, number_of_particle_groups
1051	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
1052	WRITE ( io, 490 ) i, 0.0
1053	WRITE ( io, 492 )
1054	ELSE
1055	WRITE ( io, 490 ) i, radius(i)
1056	IF ( density_ratio(i) /= 0.0 ) THEN
1057	WRITE ( io, 491 ) density_ratio(i)
1058	ELSE
1059	WRITE ( io, 492 )
1060	ENDIF
1061	ENDIF
1062	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
1063	pdx(i), pdy(i), pdz(i)
1064	ENDDO
1065
1066	#endif
1067
1068	!
1069	!-- Parameters of 1D-model
1070	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1071	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
1072	mixing_length_1d, dissipation_1d
1073	IF ( damp_level_ind_1d /= nzt+1 ) THEN
1074	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
1075	ENDIF
1076	ENDIF
1077
1078	!
1079	!-- User-defined informations
1080	CALL user_header( io )
1081
1082	WRITE ( io, 99 )
1083
1084	#if defined( __ibm )
1085	!
1086	!-- Write buffer contents to disc immediately
1087	CALL FLUSH_( io )
1088	#elif defined( __lcmuk ) \|\| defined( __nec )
1089	CALL FLUSH( io )
1090	#endif
1091
1092	!
1093	!-- Here the FORMATs start
1094
1095	99 FORMAT (1X,78('-'))
1096	100 FORMAT (/10X,'****************',11X,28('-')/ &
1097	10X,'* ',A12,'*',11X,A/ &
1098	10X,'****************',11X,28('-')// &
1099	' Date: ',A8,11X,'Run: ',A20/ &
1100	' Time: ',A8,11X,'Run-No.: ',I2.2/ &
1101	' Run on host: ',A10)
1102	#if defined( __parallel )
1103	101 FORMAT (' Number of PEs:',7X,I4,11X,'Processor grid (x,y): (',I3,',',I3, &
1104	')',1X,A)
1105	102 FORMAT (' Number of PEs:',7X,I4,11X,'Tasks:',I4,' threads per task:',I4/ &
1106	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
1107	103 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
1108	104 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
1109	37X,'because the job is running on an SMP-cluster')
1110	105 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
1111	#endif
1112	110 FORMAT (/' Numerical Schemes:'/ &
1113	' -----------------'/)
1114	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
1115	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
1116	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
1117	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
1118	' or Upstream')
1119	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
1120	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
1121	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
1122	' or Upstream')
1123	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
1124	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
1125	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
1126	' Translation velocity = ',A/ &
1127	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
1128	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
1129	' of timestep changes)')
1130	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
1131	' timestep changes')
1132	122 FORMAT (' --> Time differencing scheme: ',A)
1133	123 FORMAT (' --> Rayleigh-Damping active, starts above z = ',F8.2,' m'/ &
1134	' maximum damping coefficient: ',F5.3, ' 1/s')
1135	124 FORMAT (' Spline-overshoots are being suppressed')
1136	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1137	' of'/ &
1138	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1139	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1140	' of'/ &
1141	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1142	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1143	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1144	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1145	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1146	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
1147	130 FORMAT (' --> Additional prognostic equation for the total water content')
1148	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
1149	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
1150	' effective emissivity scheme')
1151	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
1152	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
1153	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
1154	A,'-cycle)'/ &
1155	' number of grid levels: ',I2/ &
1156	' Gauss-Seidel red/black iterations: ',I2)
1157	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1158	I3,')')
1159	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
1160	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1161	I3,')'/ &
1162	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
1163	I3,')')
1164	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
1165	139 FORMAT (' --> Prognostic equations are solved in one single loop (fast', &
1166	' method)')
1167	140 FORMAT (' maximum residual allowed: ',E10.3)
1168	141 FORMAT (' fixed number of multigrid cycles: ',I4)
1169	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
1170	'step')
1171	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
1172	'conserved')
1173	200 FORMAT (//' Run time and time step information:'/ &
1174	' ----------------------------------'/)
1175	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
1176	' CFL-factor: ',F4.2)
1177	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
1178	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
1179	' End time: ',F9.3,' s')
1180	204 FORMAT ( A,F9.3,' s')
1181	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
1182	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
1183	' CPU-time used: ',F9.3,' s per timestep: ', &
1184	' ',F9.3,' s'/ &
1185	' per second of simulated tim', &
1186	'e: ',F9.3,' s')
1187	250 FORMAT (//' Computational grid and domain size:'/ &
1188	' ----------------------------------'// &
1189	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
1190	' m dz = ',F7.3,' m'/ &
1191	' Domain size: x = ',F10.3,' m y = ',F10.3, &
1192	' m z(u) = ',F10.3,' m'/)
1193	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
1194	' factor: ',F5.3/ &
1195	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
1196	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
1197	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
1198	255 FORMAT (' Subdomains have equal size')
1199	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
1200	'have smaller sizes'/ &
1201	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
1202	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
1203	' degrees')
1204	270 FORMAT (//' Topography informations:'/ &
1205	' -----------------------'// &
1206	1X,'Topography: ',A)
1207	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
1208	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
1209	' / ',I4)
1210	300 FORMAT (//' Boundary conditions:'/ &
1211	' -------------------'// &
1212	' p uv ', &
1213	' pt'// &
1214	' B. bound.: ',A/ &
1215	' T. bound.: ',A)
1216	301 FORMAT (/' e'// &
1217	' B. bound.: ',A/ &
1218	' T. bound.: ',A)
1219	302 FORMAT (/' q'// &
1220	' B. bound.: ',A/ &
1221	' T. bound.: ',A)
1222	303 FORMAT (/' Surface fluxes are used in diffusion terms at k=1')
1223	305 FORMAT (//' Prandtl-Layer between surface and first computational ', &
1224	'u,v-level:'// &
1225	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
1226	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1227	306 FORMAT (' Predefined constant heatflux: ',F6.3,' K m/s')
1228	307 FORMAT (' Heatflux has a random normal distribution')
1229	308 FORMAT (' Predefined surface temperature')
1230	310 FORMAT (//' 1D-Model:'// &
1231	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1232	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
1233	312 FORMAT (' Predefined surface humidity')
1234	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
1235	314 FORMAT (' Predefined scalar value at the surface')
1236	317 FORMAT (//' Lateral boundaries:'/ &
1237	' left/right: ',A/ &
1238	' north/south: ',A)
1239	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
1240	'max =',F5.1,' m**2/s')
1241	320 FORMAT (//' List output:'/ &
1242	' -----------'// &
1243	' 1D-Profiles:'/ &
1244	' Output every ',F8.2,' s')
1245	321 FORMAT (' Time averaged over ',F8.2,' s'/ &
1246	' Averaging input every ',F8.2,' s')
1247	330 FORMAT (//' Data output:'/ &
1248	' -----------'/)
1249	331 FORMAT (/' 1D-Profiles:')
1250	332 FORMAT (/' ',A)
1251	333 FORMAT (' Output every ',F8.2,' s',/ &
1252	' Time averaged over ',F8.2,' s'/ &
1253	' Averaging input every ',F8.2,' s')
1254	334 FORMAT (/' 2D-Arrays',A,':')
1255	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1256	' Output every ',F8.2,' s ',A/ &
1257	' Cross sections at ',A1,' = ',A/ &
1258	' scalar-coordinates: ',A,' m'/)
1259	336 FORMAT (/' 3D-Arrays',A,':')
1260	337 FORMAT (/' Arrays: ',A/ &
1261	' Output every ',F8.2,' s ',A/ &
1262	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1263	338 FORMAT (' Compressed data output'/ &
1264	' Decimal precision: ',A/)
1265	339 FORMAT (' No output during initial ',F8.2,' s')
1266	340 FORMAT (/' Time series:')
1267	341 FORMAT (' Output every ',F8.2,' s'/)
1268	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1269	' Output every ',F8.2,' s ',A/ &
1270	' Time averaged over ',F8.2,' s'/ &
1271	' Averaging input every ',F8.2,' s'/ &
1272	' Cross sections at ',A1,' = ',A/ &
1273	' scalar-coordinates: ',A,' m'/)
1274	343 FORMAT (/' Arrays: ',A/ &
1275	' Output every ',F8.2,' s ',A/ &
1276	' Time averaged over ',F8.2,' s'/ &
1277	' Averaging input every ',F8.2,' s'/ &
1278	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1279	345 FORMAT (' Output format: ',A/)
1280	#if defined( __dvrp_graphics )
1281	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
1282	' Output every ',F7.1,' s'/ &
1283	' Output mode: ',A/ &
1284	' Host / User: ',A,' / ',A/ &
1285	' Directory: ',A// &
1286	' The sequence contains:')
1287	361 FORMAT (' Isosurface of ',A,' Threshold value: ', E12.3)
1288	362 FORMAT (' Sectional plane ',A)
1289	363 FORMAT (' Particles')
1290	#endif
1291	#if defined( __spectra )
1292	370 FORMAT (' Spectra:')
1293	371 FORMAT (' Output every ',F7.1,' s'/)
1294	372 FORMAT (' Arrays: ', 10(A5,',')/ &
1295	' Directions: ', 10(A5,',')/ &
1296	' height levels k = ', 9(I3,','),I3,'.'/ &
1297	' height levels selected for standard plot:'/ &
1298	' k = ', 9(I3,','),I3,'.'/ &
1299	' Time averaged over ', F7.1, ' s,' / &
1300	' Profiles for the time averaging are taken every ', &
1301	F6.1,' s')
1302	#endif
1303	400 FORMAT (//' Physical quantities:'/ &
1304	' -------------------'/)
1305	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
1306	' Geograph. latitude : phi = ',F4.1,' degr'/ &
1307	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
1308	' f* = ',F9.6,' 1/s')
1309	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
1310	412 FORMAT (/' Cloud physics parameters:'/ &
1311	' ------------------------'/)
1312	413 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
1313	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
1314	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
1315	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
1316	' Vapourization heat : L_v = ',E8.2,' J/kg')
1317	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
1318	' Height: ',A,' m'/ &
1319	' Temperature: ',A,' K'/ &
1320	' Gradient: ',A,' K/100m'/ &
1321	' Gridpoint: ',A)
1322	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
1323	' Height: ',A,' m'/ &
1324	' Humidity: ',A,' kg/kg'/ &
1325	' Gradient: ',A,' (kg/kg)/100m'/ &
1326	' Gridpoint: ',A)
1327	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
1328	' Height: ',A,' m'/ &
1329	' Scalar concentration: ',A,' kg/m**3'/ &
1330	' Gradient: ',A,' (kg/m**3)/100m'/ &
1331	' Gridpoint: ',A)
1332	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
1333	' Height: ',A,' m'/ &
1334	' ug: ',A,' m/s'/ &
1335	' Gradient: ',A,' 1/100s'/ &
1336	' Gridpoint: ',A)
1337	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
1338	' Height: ',A,' m'/ &
1339	' vg: ',A,' m/S'/ &
1340	' Gradient: ',A,' 1/100s'/ &
1341	' Gridpoint: ',A)
1342	450 FORMAT (//' LES / Turbulence quantities:'/ &
1343	' ---------------------------'/)
1344	451 FORMAT (' Diffusion coefficients are constant:'/ &
1345	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
1346	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
1347	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
1348	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
1349	470 FORMAT (//' Actions during the simulation:'/ &
1350	' -----------------------------'/)
1351	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
1352	' Disturbance amplitude : ',F4.2, ' m/s'/ &
1353	' Lower disturbance level : ',F7.2,' m (GP ',I4,')'/ &
1354	' Upper disturbance level : ',F7.2,' m (GP ',I4,')')
1355	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
1356	' to i/j =',I4)
1357	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
1358	1X,F5.3, ' m2/s2')
1359	474 FORMAT (' Random number generator used : ',A/)
1360	475 FORMAT (' The surface temperature is increased (or decreased, ', &
1361	'respectively, if'/ &
1362	' the value is negative) by ',F5.2,' K at the beginning of the',&
1363	' 3D-simulation'/)
1364	476 FORMAT (' The surface humidity is increased (or decreased, ',&
1365	'respectively, if the'/ &
1366	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
1367	' the 3D-simulation'/)
1368	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
1369	'respectively, if the'/ &
1370	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
1371	' the 3D-simulation'/)
1372	#if defined( __particles )
1373	480 FORMAT (' Particles:'/ &
1374	' ---------'// &
1375	' Particle advection is active (switched on at t = ', F7.1, &
1376	' s)'/ &
1377	' Start of new particle generations every ',F6.1,' s'/ &
1378	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
1379	' bottom: ', A, ' top: ', A/&
1380	' Maximum particle age: ',F9.1,' s'/ &
1381	' Advection stopped at t = ',F9.1,' s'/)
1382	481 FORMAT (' Particles have random start positions'/)
1383	482 FORMAT (' Particles are advected only horizontally'/)
1384	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
1385	484 FORMAT (' Number of tails of the total domain: ',I10/ &
1386	' Minimum distance between tailpoints: ',F8.2,' m'/ &
1387	' Maximum age of the end of the tail: ',F8.2,' s')
1388	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
1389	486 FORMAT (' Particle statistics are written on file'/)
1390	487 FORMAT (' Number of particle groups: ',I2/)
1391	488 FORMAT (' SGS velocity components are used for particle advection'/ &
1392	' minimum timestep for advection: ', F7.5/)
1393	489 FORMAT (' Number of particles simultaneously released at each ', &
1394	'point: ', I5/)
1395	490 FORMAT (' Particle group ',I2,':'/ &
1396	' Particle radius: ',E10.3, 'm')
1397	491 FORMAT (' Particle inertia is activated'/ &
1398	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
1399	492 FORMAT (' Particles are advected only passively (no inertia)'/)
1400	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
1401	' y:',F8.1,' - ',F8.1,' m'/&
1402	' z:',F8.1,' - ',F8.1,' m'/&
1403	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
1404	' m dz = ',F8.1,' m'/)
1405	494 FORMAT (' Output of particle time series in NetCDF format every ', &
1406	F8.2,' s'/)
1407	495 FORMAT (' Number of particles in total domain: ',I10/)
1408	#endif
1409	500 FORMAT (//' 1D-Model parameters:'/ &
1410	' -------------------'// &
1411	' Simulation time: ',F8.1,' s'/ &
1412	' Run-controll output every: ',F8.1,' s'/ &
1413	' Vertical profile output every: ',F8.1,' s'/ &
1414	' Mixing length calculation: ',A/ &
1415	' Dissipation calculation: ',A/)
1416	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
1417
1418
1419	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |