Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 254

Last change on this file since 254 was 254, checked in by heinze, 15 years ago
Output of messages replaced by message handling routine.
Property svn:keywords set to `Id`
File size: 65.7 KB

Line
1	SUBROUTINE header
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	! Output of messages replaced by message handling routine.
7	! Output of cluster_size
8	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
9	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
10	! dp_smooth, dpdxy, u_bulk, v_bulk
11	!
12	! Former revisions:
13	! -----------------
14	! $Id: header.f90 254 2009-03-05 15:33:42Z heinze $
15	!
16	! 206 2008-10-13 14:59:11Z raasch
17	! Bugfix: error in zu index in case of section_xy = -1
18	!
19	! 198 2008-09-17 08:55:28Z raasch
20	! Format adjustments allowing output of larger revision numbers
21	!
22	! 197 2008-09-16 15:29:03Z raasch
23	! allow 100 spectra levels instead of 10 for consistency with
24	! define_netcdf_header,
25	! bugfix in the output of the characteristic levels of potential temperature,
26	! geostrophic wind, scalar concentration, humidity and leaf area density,
27	! output of turbulence recycling informations
28	!
29	! 138 2007-11-28 10:03:58Z letzel
30	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
31	! Allow two instead of one digit to specify isosurface and slicer variables.
32	! Output of sorting frequency of particles
33	!
34	! 108 2007-08-24 15:10:38Z letzel
35	! Output of informations for coupled model runs (boundary conditions etc.)
36	! + output of momentumfluxes at the top boundary
37	! Rayleigh damping for ocean, e_init
38	!
39	! 97 2007-06-21 08:23:15Z raasch
40	! Adjustments for the ocean version.
41	! use_pt_reference renamed use_reference
42	!
43	! 87 2007-05-22 15:46:47Z raasch
44	! Bugfix: output of use_upstream_for_tke
45	!
46	! 82 2007-04-16 15:40:52Z raasch
47	! Preprocessor strings for different linux clusters changed to "lc",
48	! routine local_flush is used for buffer flushing
49	!
50	! 76 2007-03-29 00:58:32Z raasch
51	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
52	! output of the loop optimization method, moisture renamed humidity,
53	! output of subversion revision number
54	!
55	! 19 2007-02-23 04:53:48Z raasch
56	! Output of scalar flux applied at top boundary
57	!
58	! RCS Log replace by Id keyword, revision history cleaned up
59	!
60	! Revision 1.63 2006/08/22 13:53:13 raasch
61	! Output of dz_max
62	!
63	! Revision 1.1 1997/08/11 06:17:20 raasch
64	! Initial revision
65	!
66	!
67	! Description:
68	! ------------
69	! Writing a header with all important informations about the actual run.
70	! This subroutine is called three times, two times at the beginning
71	! (writing information on files RUN_CONTROL and HEADER) and one time at the
72	! end of the run, then writing additional information about CPU-usage on file
73	! header.
74	!------------------------------------------------------------------------------!
75
76	USE arrays_3d
77	USE control_parameters
78	USE cloud_parameters
79	USE cpulog
80	USE dvrp_variables
81	USE grid_variables
82	USE indices
83	USE model_1d
84	USE particle_attributes
85	USE pegrid
86	USE spectrum
87
88	IMPLICIT NONE
89
90	CHARACTER (LEN=1) :: prec
91	CHARACTER (LEN=2) :: do2d_mode
92	CHARACTER (LEN=5) :: section_chr
93	CHARACTER (LEN=9) :: time_to_string
94	CHARACTER (LEN=10) :: coor_chr, host_chr
95	CHARACTER (LEN=16) :: begin_chr
96	CHARACTER (LEN=23) :: ver_rev
97	CHARACTER (LEN=40) :: output_format
98	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
99	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
100	run_classification
101	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
102	temperatures, ugcomponent, vgcomponent
103	CHARACTER (LEN=85) :: roben, runten
104
105	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, cwx, cwy, cxl, cxr, &
106	cyn, cys, i, ihost, io, j, l, ll
107	REAL :: cpuseconds_per_simulated_second
108
109	!
110	!-- Open the output file. At the end of the simulation, output is directed
111	!-- to unit 19.
112	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
113	.NOT. simulated_time_at_begin /= simulated_time ) THEN
114	io = 15 ! header output on file RUN_CONTROL
115	ELSE
116	io = 19 ! header output on file HEADER
117	ENDIF
118	CALL check_open( io )
119
120	!
121	!-- At the end of the run, output file (HEADER) will be rewritten with
122	!-- new informations
123	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
124
125	!
126	!-- Determine kind of model run
127	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
128	run_classification = '3D - restart run'
129	ELSEIF ( TRIM( initializing_actions ) == 'read_data_for_recycling' ) THEN
130	run_classification = '3D - run using 3D - prerun data'
131	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
132	run_classification = '3D - run without 1D - prerun'
133	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
134	run_classification = '3D - run with 1D - prerun'
135	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
136	run_classification = '3D - run initialized by user'
137	ELSE
138	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
139	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
140	ENDIF
141	IF ( ocean ) THEN
142	run_classification = 'ocean - ' // run_classification
143	ELSE
144	run_classification = 'atmosphere - ' // run_classification
145	ENDIF
146
147	!
148	!-- Run-identification, date, time, host
149	host_chr = host(1:10)
150	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
151	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
152	IF ( coupling_mode /= 'uncoupled' ) WRITE ( io, 101 ) coupling_mode
153	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
154	ADJUSTR( host_chr )
155	#if defined( __parallel )
156	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
157	char1 = 'calculated'
158	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
159	host(1:2) == 'lc' ) .AND. &
160	npex == -1 .AND. pdims(2) == 1 ) THEN
161	char1 = 'forced'
162	ELSE
163	char1 = 'predefined'
164	ENDIF
165	IF ( threads_per_task == 1 ) THEN
166	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
167	ELSE
168	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
169	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
170	ENDIF
171	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
172	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
173	npex == -1 .AND. pdims(2) == 1 ) &
174	THEN
175	WRITE ( io, 106 )
176	ELSEIF ( pdims(2) == 1 ) THEN
177	WRITE ( io, 107 ) 'x'
178	ELSEIF ( pdims(1) == 1 ) THEN
179	WRITE ( io, 107 ) 'y'
180	ENDIF
181	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
182	#endif
183	WRITE ( io, 99 )
184
185	!
186	!-- Numerical schemes
187	WRITE ( io, 110 )
188	IF ( psolver(1:7) == 'poisfft' ) THEN
189	WRITE ( io, 111 ) TRIM( fft_method )
190	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
191	ELSEIF ( psolver == 'sor' ) THEN
192	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
193	ELSEIF ( psolver == 'multigrid' ) THEN
194	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
195	IF ( mg_cycles == -1 ) THEN
196	WRITE ( io, 140 ) residual_limit
197	ELSE
198	WRITE ( io, 141 ) mg_cycles
199	ENDIF
200	IF ( mg_switch_to_pe0_level == 0 ) THEN
201	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
202	nzt_mg(1)
203	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
204	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
205	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
206	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
207	nzt_mg(mg_switch_to_pe0_level), &
208	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
209	nzt_mg(1)
210	ENDIF
211	ENDIF
212	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
213	THEN
214	WRITE ( io, 142 )
215	ENDIF
216
217	IF ( momentum_advec == 'pw-scheme' ) THEN
218	WRITE ( io, 113 )
219	ELSE
220	WRITE ( io, 114 )
221	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
222	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
223	overshoot_limit_w /= 0.0 ) THEN
224	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
225	overshoot_limit_w
226	ENDIF
227	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
228	ups_limit_w /= 0.0 ) &
229	THEN
230	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
231	ENDIF
232	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
233	ENDIF
234	IF ( scalar_advec == 'pw-scheme' ) THEN
235	WRITE ( io, 116 )
236	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
237	WRITE ( io, 117 )
238	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
239	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
240	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
241	ENDIF
242	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
243	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
244	ENDIF
245	ELSE
246	WRITE ( io, 118 )
247	ENDIF
248
249	WRITE ( io, 139 ) TRIM( loop_optimization )
250
251	IF ( galilei_transformation ) THEN
252	IF ( use_ug_for_galilei_tr ) THEN
253	char1 = 'geostrophic wind'
254	ELSE
255	char1 = 'mean wind in model domain'
256	ENDIF
257	IF ( simulated_time_at_begin == simulated_time ) THEN
258	char2 = 'at the start of the run'
259	ELSE
260	char2 = 'at the end of the run'
261	ENDIF
262	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
263	advected_distance_x/1000.0, advected_distance_y/1000.0
264	ENDIF
265	IF ( timestep_scheme == 'leapfrog' ) THEN
266	WRITE ( io, 120 )
267	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
268	WRITE ( io, 121 )
269	ELSE
270	WRITE ( io, 122 ) timestep_scheme
271	ENDIF
272	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
273	IF ( rayleigh_damping_factor /= 0.0 ) THEN
274	IF ( .NOT. ocean ) THEN
275	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
276	rayleigh_damping_factor
277	ELSE
278	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
279	rayleigh_damping_factor
280	ENDIF
281	ENDIF
282	IF ( humidity ) THEN
283	IF ( .NOT. cloud_physics ) THEN
284	WRITE ( io, 129 )
285	ELSE
286	WRITE ( io, 130 )
287	WRITE ( io, 131 )
288	IF ( radiation ) WRITE ( io, 132 )
289	IF ( precipitation ) WRITE ( io, 133 )
290	ENDIF
291	ENDIF
292	IF ( passive_scalar ) WRITE ( io, 134 )
293	IF ( conserve_volume_flow ) THEN
294	WRITE ( io, 150 ) conserve_volume_flow_mode
295	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
296	WRITE ( io, 151 ) u_bulk, v_bulk
297	ENDIF
298	ELSEIF ( dp_external ) THEN
299	IF ( dp_smooth ) THEN
300	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
301	ELSE
302	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
303	ENDIF
304	ENDIF
305	WRITE ( io, 99 )
306
307	!
308	!-- Runtime and timestep informations
309	WRITE ( io, 200 )
310	IF ( .NOT. dt_fixed ) THEN
311	WRITE ( io, 201 ) dt_max, cfl_factor
312	ELSE
313	WRITE ( io, 202 ) dt
314	ENDIF
315	WRITE ( io, 203 ) simulated_time_at_begin, end_time
316
317	IF ( time_restart /= 9999999.9 .AND. &
318	simulated_time_at_begin == simulated_time ) THEN
319	IF ( dt_restart == 9999999.9 ) THEN
320	WRITE ( io, 204 ) ' Restart at: ',time_restart
321	ELSE
322	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
323	ENDIF
324	ENDIF
325
326	IF ( simulated_time_at_begin /= simulated_time ) THEN
327	i = MAX ( log_point_s(10)%counts, 1 )
328	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
329	cpuseconds_per_simulated_second = 0.0
330	ELSE
331	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
332	( simulated_time - &
333	simulated_time_at_begin )
334	ENDIF
335	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
336	log_point_s(10)%sum / REAL( i ), &
337	cpuseconds_per_simulated_second
338	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
339	IF ( dt_restart == 9999999.9 ) THEN
340	WRITE ( io, 204 ) ' Next restart at: ',time_restart
341	ELSE
342	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
343	ENDIF
344	ENDIF
345	ENDIF
346
347	!
348	!-- Computational grid
349	IF ( .NOT. ocean ) THEN
350	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
351	IF ( dz_stretch_level_index < nzt+1 ) THEN
352	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
353	dz_stretch_factor, dz_max
354	ENDIF
355	ELSE
356	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
357	IF ( dz_stretch_level_index > 0 ) THEN
358	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
359	dz_stretch_factor, dz_max
360	ENDIF
361	ENDIF
362	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
363	MIN( nnz+2, nzt+2 )
364	IF ( numprocs > 1 ) THEN
365	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
366	WRITE ( io, 255 )
367	ELSE
368	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
369	ENDIF
370	ENDIF
371	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
372
373	!
374	!-- Topography
375	WRITE ( io, 270 ) topography
376	SELECT CASE ( TRIM( topography ) )
377
378	CASE ( 'flat' )
379	! no actions necessary
380
381	CASE ( 'single_building' )
382	blx = INT( building_length_x / dx )
383	bly = INT( building_length_y / dy )
384	bh = INT( building_height / dz )
385
386	IF ( building_wall_left == 9999999.9 ) THEN
387	building_wall_left = ( nx + 1 - blx ) / 2 * dx
388	ENDIF
389	bxl = INT ( building_wall_left / dx + 0.5 )
390	bxr = bxl + blx
391
392	IF ( building_wall_south == 9999999.9 ) THEN
393	building_wall_south = ( ny + 1 - bly ) / 2 * dy
394	ENDIF
395	bys = INT ( building_wall_south / dy + 0.5 )
396	byn = bys + bly
397
398	WRITE ( io, 271 ) building_length_x, building_length_y, &
399	building_height, bxl, bxr, bys, byn
400
401	CASE ( 'single_street_canyon' )
402	ch = NINT( canyon_height / dz )
403	IF ( canyon_width_x /= 9999999.9 ) THEN
404	!
405	!-- Street canyon in y direction
406	cwx = NINT( canyon_width_x / dx )
407	IF ( canyon_wall_left == 9999999.9 ) THEN
408	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
409	ENDIF
410	cxl = NINT( canyon_wall_left / dx )
411	cxr = cxl + cwx
412	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
413
414	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
415	!
416	!-- Street canyon in x direction
417	cwy = NINT( canyon_width_y / dy )
418	IF ( canyon_wall_south == 9999999.9 ) THEN
419	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
420	ENDIF
421	cys = NINT( canyon_wall_south / dy )
422	cyn = cys + cwy
423	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
424	ENDIF
425
426	END SELECT
427
428	IF ( plant_canopy ) THEN
429
430	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
431	IF ( passive_scalar ) THEN
432	WRITE ( io, 281 ) scalar_exchange_coefficient, &
433	leaf_surface_concentration
434	ENDIF
435
436	!
437	!-- Heat flux at the top of vegetation
438	WRITE ( io, 282 ) cthf
439
440	!
441	!-- Leaf area density profile
442	!-- Building output strings, starting with surface value
443	WRITE ( learde, '(F6.2)' ) lad_surface
444	gradients = '------'
445	slices = ' 0'
446	coordinates = ' 0.0'
447	i = 1
448	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
449
450	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
451	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
452
453	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
454	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
455
456	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
457	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
458
459	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
460	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
461
462	i = i + 1
463	ENDDO
464
465	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
466	TRIM( gradients ), TRIM( slices )
467
468	ENDIF
469
470	!
471	!-- Boundary conditions
472	IF ( ibc_p_b == 0 ) THEN
473	runten = 'p(0) = 0 \|'
474	ELSEIF ( ibc_p_b == 1 ) THEN
475	runten = 'p(0) = p(1) \|'
476	ELSE
477	runten = 'p(0) = p(1) +R\|'
478	ENDIF
479	IF ( ibc_p_t == 0 ) THEN
480	roben = 'p(nzt+1) = 0 \|'
481	ELSE
482	roben = 'p(nzt+1) = p(nzt) \|'
483	ENDIF
484
485	IF ( ibc_uv_b == 0 ) THEN
486	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
487	ELSE
488	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
489	ENDIF
490	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
491	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
492	ELSEIF ( ibc_uv_t == 0 ) THEN
493	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
494	ELSE
495	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
496	ENDIF
497
498	IF ( ibc_pt_b == 0 ) THEN
499	runten = TRIM( runten ) // ' pt(0) = pt_surface'
500	ELSEIF ( ibc_pt_b == 1 ) THEN
501	runten = TRIM( runten ) // ' pt(0) = pt(1)'
502	ELSEIF ( ibc_pt_b == 2 ) THEN
503	runten = TRIM( runten ) // ' pt(0) = from coupled model'
504	ENDIF
505	IF ( ibc_pt_t == 0 ) THEN
506	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
507	ELSEIF( ibc_pt_t == 1 ) THEN
508	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
509	ELSEIF( ibc_pt_t == 2 ) THEN
510	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
511	ENDIF
512
513	WRITE ( io, 300 ) runten, roben
514
515	IF ( .NOT. constant_diffusion ) THEN
516	IF ( ibc_e_b == 1 ) THEN
517	runten = 'e(0) = e(1)'
518	ELSE
519	runten = 'e(0) = e(1) = (u/0.1)*2'
520	ENDIF
521	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
522
523	WRITE ( io, 301 ) 'e', runten, roben
524
525	ENDIF
526
527	IF ( ocean ) THEN
528	runten = 'sa(0) = sa(1)'
529	IF ( ibc_sa_t == 0 ) THEN
530	roben = 'sa(nzt+1) = sa_surface'
531	ELSE
532	roben = 'sa(nzt+1) = sa(nzt)'
533	ENDIF
534	WRITE ( io, 301 ) 'sa', runten, roben
535	ENDIF
536
537	IF ( humidity ) THEN
538	IF ( ibc_q_b == 0 ) THEN
539	runten = 'q(0) = q_surface'
540	ELSE
541	runten = 'q(0) = q(1)'
542	ENDIF
543	IF ( ibc_q_t == 0 ) THEN
544	roben = 'q(nzt) = q_top'
545	ELSE
546	roben = 'q(nzt) = q(nzt-1) + dq/dz'
547	ENDIF
548	WRITE ( io, 301 ) 'q', runten, roben
549	ENDIF
550
551	IF ( passive_scalar ) THEN
552	IF ( ibc_q_b == 0 ) THEN
553	runten = 's(0) = s_surface'
554	ELSE
555	runten = 's(0) = s(1)'
556	ENDIF
557	IF ( ibc_q_t == 0 ) THEN
558	roben = 's(nzt) = s_top'
559	ELSE
560	roben = 's(nzt) = s(nzt-1) + ds/dz'
561	ENDIF
562	WRITE ( io, 301 ) 's', runten, roben
563	ENDIF
564
565	IF ( use_surface_fluxes ) THEN
566	WRITE ( io, 303 )
567	IF ( constant_heatflux ) THEN
568	WRITE ( io, 306 ) surface_heatflux
569	IF ( random_heatflux ) WRITE ( io, 307 )
570	ENDIF
571	IF ( humidity .AND. constant_waterflux ) THEN
572	WRITE ( io, 311 ) surface_waterflux
573	ENDIF
574	IF ( passive_scalar .AND. constant_waterflux ) THEN
575	WRITE ( io, 313 ) surface_waterflux
576	ENDIF
577	ENDIF
578
579	IF ( use_top_fluxes ) THEN
580	WRITE ( io, 304 )
581	IF ( coupling_mode == 'uncoupled' ) THEN
582	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
583	IF ( constant_top_heatflux ) THEN
584	WRITE ( io, 306 ) top_heatflux
585	ENDIF
586	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
587	WRITE ( io, 316 )
588	ENDIF
589	IF ( ocean .AND. constant_top_salinityflux ) THEN
590	WRITE ( io, 309 ) top_salinityflux
591	ENDIF
592	IF ( humidity .OR. passive_scalar ) THEN
593	WRITE ( io, 315 )
594	ENDIF
595	ENDIF
596
597	IF ( prandtl_layer ) THEN
598	WRITE ( io, 305 ) 0.5 * (zu(1)-zu(0)), roughness_length, kappa, &
599	rif_min, rif_max
600	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
601	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
602	WRITE ( io, 312 )
603	ENDIF
604	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
605	WRITE ( io, 314 )
606	ENDIF
607	ELSE
608	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
609	WRITE ( io, 310 ) rif_min, rif_max
610	ENDIF
611	ENDIF
612
613	WRITE ( io, 317 ) bc_lr, bc_ns
614	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
615	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
616	IF ( turbulent_inflow ) THEN
617	WRITE ( io, 319 ) recycling_width, recycling_plane, &
618	inflow_damping_height, inflow_damping_width
619	ENDIF
620	ENDIF
621
622	!
623	!-- Listing of 1D-profiles
624	WRITE ( io, 325 ) dt_dopr_listing
625	IF ( averaging_interval_pr /= 0.0 ) THEN
626	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
627	ENDIF
628
629	!
630	!-- DATA output
631	WRITE ( io, 330 )
632	IF ( averaging_interval_pr /= 0.0 ) THEN
633	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
634	ENDIF
635
636	!
637	!-- 1D-profiles
638	dopr_chr = 'Pofile:'
639	IF ( dopr_n /= 0 ) THEN
640	WRITE ( io, 331 )
641
642	output_format = ''
643	IF ( netcdf_output ) THEN
644	IF ( netcdf_64bit ) THEN
645	output_format = 'netcdf (64 bit offset)'
646	ELSE
647	output_format = 'netcdf'
648	ENDIF
649	ENDIF
650	IF ( profil_output ) THEN
651	IF ( netcdf_output ) THEN
652	output_format = TRIM( output_format ) // ' and profil'
653	ELSE
654	output_format = 'profil'
655	ENDIF
656	ENDIF
657	WRITE ( io, 345 ) output_format
658
659	DO i = 1, dopr_n
660	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
661	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
662	WRITE ( io, 332 ) dopr_chr
663	dopr_chr = ' :'
664	ENDIF
665	ENDDO
666
667	IF ( dopr_chr /= '' ) THEN
668	WRITE ( io, 332 ) dopr_chr
669	ENDIF
670	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
671	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
672	ENDIF
673
674	!
675	!-- 2D-arrays
676	DO av = 0, 1
677
678	i = 1
679	do2d_xy = ''
680	do2d_xz = ''
681	do2d_yz = ''
682	DO WHILE ( do2d(av,i) /= ' ' )
683
684	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
685	do2d_mode = do2d(av,i)(l-1:l)
686
687	SELECT CASE ( do2d_mode )
688	CASE ( 'xy' )
689	ll = LEN_TRIM( do2d_xy )
690	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
691	CASE ( 'xz' )
692	ll = LEN_TRIM( do2d_xz )
693	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
694	CASE ( 'yz' )
695	ll = LEN_TRIM( do2d_yz )
696	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
697	END SELECT
698
699	i = i + 1
700
701	ENDDO
702
703	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
704	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
705	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
706	( netcdf_output .OR. iso2d_output ) ) THEN
707
708	IF ( av == 0 ) THEN
709	WRITE ( io, 334 ) ''
710	ELSE
711	WRITE ( io, 334 ) '(time-averaged)'
712	ENDIF
713
714	IF ( do2d_at_begin ) THEN
715	begin_chr = 'and at the start'
716	ELSE
717	begin_chr = ''
718	ENDIF
719
720	output_format = ''
721	IF ( netcdf_output ) THEN
722	IF ( netcdf_64bit ) THEN
723	output_format = 'netcdf (64 bit offset)'
724	ELSE
725	output_format = 'netcdf'
726	ENDIF
727	ENDIF
728	IF ( iso2d_output ) THEN
729	IF ( netcdf_output ) THEN
730	output_format = TRIM( output_format ) // ' and iso2d'
731	ELSE
732	output_format = 'iso2d'
733	ENDIF
734	ENDIF
735	WRITE ( io, 345 ) output_format
736
737	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
738	i = 1
739	slices = '/'
740	coordinates = '/'
741	!
742	!-- Building strings with index and coordinate informations of the
743	!-- slices
744	DO WHILE ( section(i,1) /= -9999 )
745
746	WRITE (section_chr,'(I5)') section(i,1)
747	section_chr = ADJUSTL( section_chr )
748	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
749
750	IF ( section(i,1) == -1 ) THEN
751	WRITE (coor_chr,'(F10.1)') -1.0
752	ELSE
753	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
754	ENDIF
755	coor_chr = ADJUSTL( coor_chr )
756	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
757
758	i = i + 1
759	ENDDO
760	IF ( av == 0 ) THEN
761	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
762	TRIM( begin_chr ), 'k', TRIM( slices ), &
763	TRIM( coordinates )
764	IF ( skip_time_do2d_xy /= 0.0 ) THEN
765	WRITE ( io, 339 ) skip_time_do2d_xy
766	ENDIF
767	ELSE
768	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
769	TRIM( begin_chr ), averaging_interval, &
770	dt_averaging_input, 'k', TRIM( slices ), &
771	TRIM( coordinates )
772	IF ( skip_time_data_output_av /= 0.0 ) THEN
773	WRITE ( io, 339 ) skip_time_data_output_av
774	ENDIF
775	ENDIF
776
777	ENDIF
778
779	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
780	i = 1
781	slices = '/'
782	coordinates = '/'
783	!
784	!-- Building strings with index and coordinate informations of the
785	!-- slices
786	DO WHILE ( section(i,2) /= -9999 )
787
788	WRITE (section_chr,'(I5)') section(i,2)
789	section_chr = ADJUSTL( section_chr )
790	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
791
792	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
793	coor_chr = ADJUSTL( coor_chr )
794	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
795
796	i = i + 1
797	ENDDO
798	IF ( av == 0 ) THEN
799	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
800	TRIM( begin_chr ), 'j', TRIM( slices ), &
801	TRIM( coordinates )
802	IF ( skip_time_do2d_xz /= 0.0 ) THEN
803	WRITE ( io, 339 ) skip_time_do2d_xz
804	ENDIF
805	ELSE
806	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
807	TRIM( begin_chr ), averaging_interval, &
808	dt_averaging_input, 'j', TRIM( slices ), &
809	TRIM( coordinates )
810	IF ( skip_time_data_output_av /= 0.0 ) THEN
811	WRITE ( io, 339 ) skip_time_data_output_av
812	ENDIF
813	ENDIF
814	ENDIF
815
816	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
817	i = 1
818	slices = '/'
819	coordinates = '/'
820	!
821	!-- Building strings with index and coordinate informations of the
822	!-- slices
823	DO WHILE ( section(i,3) /= -9999 )
824
825	WRITE (section_chr,'(I5)') section(i,3)
826	section_chr = ADJUSTL( section_chr )
827	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
828
829	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
830	coor_chr = ADJUSTL( coor_chr )
831	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
832
833	i = i + 1
834	ENDDO
835	IF ( av == 0 ) THEN
836	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
837	TRIM( begin_chr ), 'i', TRIM( slices ), &
838	TRIM( coordinates )
839	IF ( skip_time_do2d_yz /= 0.0 ) THEN
840	WRITE ( io, 339 ) skip_time_do2d_yz
841	ENDIF
842	ELSE
843	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
844	TRIM( begin_chr ), averaging_interval, &
845	dt_averaging_input, 'i', TRIM( slices ), &
846	TRIM( coordinates )
847	IF ( skip_time_data_output_av /= 0.0 ) THEN
848	WRITE ( io, 339 ) skip_time_data_output_av
849	ENDIF
850	ENDIF
851	ENDIF
852
853	ENDIF
854
855	ENDDO
856
857	!
858	!-- 3d-arrays
859	DO av = 0, 1
860
861	i = 1
862	do3d_chr = ''
863	DO WHILE ( do3d(av,i) /= ' ' )
864
865	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
866	i = i + 1
867
868	ENDDO
869
870	IF ( do3d_chr /= '' ) THEN
871	IF ( av == 0 ) THEN
872	WRITE ( io, 336 ) ''
873	ELSE
874	WRITE ( io, 336 ) '(time-averaged)'
875	ENDIF
876
877	output_format = ''
878	IF ( netcdf_output ) THEN
879	IF ( netcdf_64bit .AND. netcdf_64bit_3d ) THEN
880	output_format = 'netcdf (64 bit offset)'
881	ELSE
882	output_format = 'netcdf'
883	ENDIF
884	ENDIF
885	IF ( avs_output ) THEN
886	IF ( netcdf_output ) THEN
887	output_format = TRIM( output_format ) // ' and avs'
888	ELSE
889	output_format = 'avs'
890	ENDIF
891	ENDIF
892	WRITE ( io, 345 ) output_format
893
894	IF ( do3d_at_begin ) THEN
895	begin_chr = 'and at the start'
896	ELSE
897	begin_chr = ''
898	ENDIF
899	IF ( av == 0 ) THEN
900	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
901	zu(nz_do3d), nz_do3d
902	ELSE
903	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
904	TRIM( begin_chr ), averaging_interval, &
905	dt_averaging_input, zu(nz_do3d), nz_do3d
906	ENDIF
907
908	IF ( do3d_compress ) THEN
909	do3d_chr = ''
910	i = 1
911	DO WHILE ( do3d(av,i) /= ' ' )
912
913	SELECT CASE ( do3d(av,i) )
914	CASE ( 'u' )
915	j = 1
916	CASE ( 'v' )
917	j = 2
918	CASE ( 'w' )
919	j = 3
920	CASE ( 'p' )
921	j = 4
922	CASE ( 'pt' )
923	j = 5
924	END SELECT
925	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
926	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
927	':' // prec // ','
928	i = i + 1
929
930	ENDDO
931	WRITE ( io, 338 ) do3d_chr
932
933	ENDIF
934
935	IF ( av == 0 ) THEN
936	IF ( skip_time_do3d /= 0.0 ) THEN
937	WRITE ( io, 339 ) skip_time_do3d
938	ENDIF
939	ELSE
940	IF ( skip_time_data_output_av /= 0.0 ) THEN
941	WRITE ( io, 339 ) skip_time_data_output_av
942	ENDIF
943	ENDIF
944
945	ENDIF
946
947	ENDDO
948
949	!
950	!-- Timeseries
951	IF ( dt_dots /= 9999999.9 ) THEN
952	WRITE ( io, 340 )
953
954	output_format = ''
955	IF ( netcdf_output ) THEN
956	IF ( netcdf_64bit ) THEN
957	output_format = 'netcdf (64 bit offset)'
958	ELSE
959	output_format = 'netcdf'
960	ENDIF
961	ENDIF
962	IF ( profil_output ) THEN
963	IF ( netcdf_output ) THEN
964	output_format = TRIM( output_format ) // ' and profil'
965	ELSE
966	output_format = 'profil'
967	ENDIF
968	ENDIF
969	WRITE ( io, 345 ) output_format
970	WRITE ( io, 341 ) dt_dots
971	ENDIF
972
973	#if defined( __dvrp_graphics )
974	!
975	!-- Dvrp-output
976	IF ( dt_dvrp /= 9999999.9 ) THEN
977	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
978	TRIM( dvrp_username ), TRIM( dvrp_directory )
979	i = 1
980	l = 0
981	DO WHILE ( mode_dvrp(i) /= ' ' )
982	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
983	READ ( mode_dvrp(i), '(10X,I2)' ) j
984	l = l + 1
985	IF ( do3d(0,j) /= ' ' ) THEN
986	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l)
987	ENDIF
988	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
989	READ ( mode_dvrp(i), '(6X,I2)' ) j
990	IF ( do2d(0,j) /= ' ' ) WRITE ( io, 362 ) TRIM( do2d(0,j) )
991	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
992	WRITE ( io, 363 )
993	ENDIF
994	i = i + 1
995	ENDDO
996
997	IF ( TRIM( topography ) /= 'flat' .AND. cluster_size > 1 ) THEN
998	WRITE ( io, 364 ) cluster_size
999	ENDIF
1000
1001	ENDIF
1002	#endif
1003
1004	#if defined( __spectra )
1005	!
1006	!-- Spectra output
1007	IF ( dt_dosp /= 9999999.9 ) THEN
1008	WRITE ( io, 370 )
1009
1010	output_format = ''
1011	IF ( netcdf_output ) THEN
1012	IF ( netcdf_64bit ) THEN
1013	output_format = 'netcdf (64 bit offset)'
1014	ELSE
1015	output_format = 'netcdf'
1016	ENDIF
1017	ENDIF
1018	IF ( profil_output ) THEN
1019	IF ( netcdf_output ) THEN
1020	output_format = TRIM( output_format ) // ' and profil'
1021	ELSE
1022	output_format = 'profil'
1023	ENDIF
1024	ENDIF
1025	WRITE ( io, 345 ) output_format
1026	WRITE ( io, 371 ) dt_dosp
1027	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
1028	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
1029	( spectra_direction(i), i = 1,10 ), &
1030	( comp_spectra_level(i), i = 1,100 ), &
1031	( plot_spectra_level(i), i = 1,100 ), &
1032	averaging_interval_sp, dt_averaging_input_pr
1033	ENDIF
1034	#endif
1035
1036	WRITE ( io, 99 )
1037
1038	!
1039	!-- Physical quantities
1040	WRITE ( io, 400 )
1041
1042	!
1043	!-- Geostrophic parameters
1044	WRITE ( io, 410 ) omega, phi, f, fs
1045
1046	!
1047	!-- Other quantities
1048	WRITE ( io, 411 ) g
1049	IF ( use_reference ) THEN
1050	IF ( ocean ) THEN
1051	WRITE ( io, 412 ) prho_reference
1052	ELSE
1053	WRITE ( io, 413 ) pt_reference
1054	ENDIF
1055	ENDIF
1056
1057	!
1058	!-- Cloud physics parameters
1059	IF ( cloud_physics ) THEN
1060	WRITE ( io, 415 )
1061	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
1062	ENDIF
1063
1064	!-- Profile of the geostrophic wind (component ug)
1065	!-- Building output strings
1066	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
1067	gradients = '------'
1068	slices = ' 0'
1069	coordinates = ' 0.0'
1070	i = 1
1071	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
1072
1073	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
1074	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
1075
1076	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
1077	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1078
1079	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
1080	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1081
1082	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
1083	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1084
1085	i = i + 1
1086	ENDDO
1087
1088	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
1089	TRIM( gradients ), TRIM( slices )
1090
1091	!-- Profile of the geostrophic wind (component vg)
1092	!-- Building output strings
1093	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
1094	gradients = '------'
1095	slices = ' 0'
1096	coordinates = ' 0.0'
1097	i = 1
1098	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
1099
1100	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
1101	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
1102
1103	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
1104	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1105
1106	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
1107	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1108
1109	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
1110	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1111
1112	i = i + 1
1113	ENDDO
1114
1115	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
1116	TRIM( gradients ), TRIM( slices )
1117
1118	!
1119	!-- Initial temperature profile
1120	!-- Building output strings, starting with surface temperature
1121	WRITE ( temperatures, '(F6.2)' ) pt_surface
1122	gradients = '------'
1123	slices = ' 0'
1124	coordinates = ' 0.0'
1125	i = 1
1126	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
1127
1128	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
1129	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1130
1131	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
1132	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1133
1134	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
1135	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1136
1137	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
1138	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1139
1140	i = i + 1
1141	ENDDO
1142
1143	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
1144	TRIM( gradients ), TRIM( slices )
1145
1146	!
1147	!-- Initial humidity profile
1148	!-- Building output strings, starting with surface humidity
1149	IF ( humidity .OR. passive_scalar ) THEN
1150	WRITE ( temperatures, '(E8.1)' ) q_surface
1151	gradients = '--------'
1152	slices = ' 0'
1153	coordinates = ' 0.0'
1154	i = 1
1155	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
1156
1157	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
1158	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1159
1160	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
1161	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1162
1163	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
1164	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1165
1166	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
1167	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1168
1169	i = i + 1
1170	ENDDO
1171
1172	IF ( humidity ) THEN
1173	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
1174	TRIM( gradients ), TRIM( slices )
1175	ELSE
1176	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
1177	TRIM( gradients ), TRIM( slices )
1178	ENDIF
1179	ENDIF
1180
1181	!
1182	!-- Initial salinity profile
1183	!-- Building output strings, starting with surface salinity
1184	IF ( ocean ) THEN
1185	WRITE ( temperatures, '(F6.2)' ) sa_surface
1186	gradients = '------'
1187	slices = ' 0'
1188	coordinates = ' 0.0'
1189	i = 1
1190	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
1191
1192	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
1193	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1194
1195	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
1196	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1197
1198	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
1199	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1200
1201	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
1202	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1203
1204	i = i + 1
1205	ENDDO
1206
1207	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
1208	TRIM( gradients ), TRIM( slices )
1209	ENDIF
1210
1211	!
1212	!-- LES / turbulence parameters
1213	WRITE ( io, 450 )
1214
1215	!--
1216	! ... LES-constants used must still be added here
1217	!--
1218	IF ( constant_diffusion ) THEN
1219	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
1220	prandtl_number
1221	ENDIF
1222	IF ( .NOT. constant_diffusion) THEN
1223	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
1224	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
1225	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
1226	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
1227	ENDIF
1228
1229	!
1230	!-- Special actions during the run
1231	WRITE ( io, 470 )
1232	IF ( create_disturbances ) THEN
1233	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
1234	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
1235	zu(disturbance_level_ind_t), disturbance_level_ind_t
1236	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1237	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
1238	ELSE
1239	WRITE ( io, 473 ) disturbance_energy_limit
1240	ENDIF
1241	WRITE ( io, 474 ) TRIM( random_generator )
1242	ENDIF
1243	IF ( pt_surface_initial_change /= 0.0 ) THEN
1244	WRITE ( io, 475 ) pt_surface_initial_change
1245	ENDIF
1246	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
1247	WRITE ( io, 476 ) q_surface_initial_change
1248	ENDIF
1249	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
1250	WRITE ( io, 477 ) q_surface_initial_change
1251	ENDIF
1252
1253	IF ( particle_advection ) THEN
1254	!
1255	!-- Particle attributes
1256	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
1257	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
1258	end_time_prel, dt_sort_particles
1259	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
1260	IF ( random_start_position ) WRITE ( io, 481 )
1261	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
1262	WRITE ( io, 495 ) total_number_of_particles
1263	IF ( .NOT. vertical_particle_advection ) WRITE ( io, 482 )
1264	IF ( maximum_number_of_tailpoints /= 0 ) THEN
1265	WRITE ( io, 483 ) maximum_number_of_tailpoints
1266	IF ( minimum_tailpoint_distance /= 0 ) THEN
1267	WRITE ( io, 484 ) total_number_of_tails, &
1268	minimum_tailpoint_distance, &
1269	maximum_tailpoint_age
1270	ENDIF
1271	ENDIF
1272	IF ( dt_write_particle_data /= 9999999.9 ) THEN
1273	WRITE ( io, 485 ) dt_write_particle_data
1274	output_format = ''
1275	IF ( netcdf_output ) THEN
1276	IF ( netcdf_64bit ) THEN
1277	output_format = 'netcdf (64 bit offset) and binary'
1278	ELSE
1279	output_format = 'netcdf and binary'
1280	ENDIF
1281	ELSE
1282	output_format = 'binary'
1283	ENDIF
1284	WRITE ( io, 345 ) output_format
1285	ENDIF
1286	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
1287	IF ( write_particle_statistics ) WRITE ( io, 486 )
1288
1289	WRITE ( io, 487 ) number_of_particle_groups
1290
1291	DO i = 1, number_of_particle_groups
1292	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
1293	WRITE ( io, 490 ) i, 0.0
1294	WRITE ( io, 492 )
1295	ELSE
1296	WRITE ( io, 490 ) i, radius(i)
1297	IF ( density_ratio(i) /= 0.0 ) THEN
1298	WRITE ( io, 491 ) density_ratio(i)
1299	ELSE
1300	WRITE ( io, 492 )
1301	ENDIF
1302	ENDIF
1303	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
1304	pdx(i), pdy(i), pdz(i)
1305	ENDDO
1306
1307	ENDIF
1308
1309
1310	!
1311	!-- Parameters of 1D-model
1312	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1313	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
1314	mixing_length_1d, dissipation_1d
1315	IF ( damp_level_ind_1d /= nzt+1 ) THEN
1316	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
1317	ENDIF
1318	ENDIF
1319
1320	!
1321	!-- User-defined informations
1322	CALL user_header( io )
1323
1324	WRITE ( io, 99 )
1325
1326	!
1327	!-- Write buffer contents to disc immediately
1328	CALL local_flush( io )
1329
1330	!
1331	!-- Here the FORMATs start
1332
1333	99 FORMAT (1X,78('-'))
1334	100 FORMAT (/1X,'***************************',9X,42('-')/ &
1335	1X,'* ',A,' *',9X,A/ &
1336	1X,'***************************',9X,42('-'))
1337	101 FORMAT (37X,'coupled run: ',A/ &
1338	37X,42('-'))
1339	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
1340	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
1341	' Run on host: ',A10)
1342	#if defined( __parallel )
1343	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
1344	')',1X,A)
1345	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
1346	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
1347	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
1348	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
1349	37X,'because the job is running on an SMP-cluster')
1350	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
1351	#endif
1352	110 FORMAT (/' Numerical Schemes:'/ &
1353	' -----------------'/)
1354	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
1355	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
1356	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
1357	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
1358	' or Upstream')
1359	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
1360	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
1361	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
1362	' or Upstream')
1363	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
1364	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
1365	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
1366	' Translation velocity = ',A/ &
1367	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
1368	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
1369	' of timestep changes)')
1370	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
1371	' timestep changes')
1372	122 FORMAT (' --> Time differencing scheme: ',A)
1373	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
1374	' maximum damping coefficient: ',F5.3, ' 1/s')
1375	124 FORMAT (' Spline-overshoots are being suppressed')
1376	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1377	' of'/ &
1378	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1379	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1380	' of'/ &
1381	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1382	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1383	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1384	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1385	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1386	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
1387	130 FORMAT (' --> Additional prognostic equation for the total water content')
1388	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
1389	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
1390	' effective emissivity scheme')
1391	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
1392	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
1393	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
1394	A,'-cycle)'/ &
1395	' number of grid levels: ',I2/ &
1396	' Gauss-Seidel red/black iterations: ',I2)
1397	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1398	I3,')')
1399	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
1400	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1401	I3,')'/ &
1402	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
1403	I3,')')
1404	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
1405	139 FORMAT (' --> Loop optimization method: ',A)
1406	140 FORMAT (' maximum residual allowed: ',E10.3)
1407	141 FORMAT (' fixed number of multigrid cycles: ',I4)
1408	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
1409	'step')
1410	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
1411	'kinetic energy')
1412	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
1413	'conserved'/ &
1414	' using the ',A,' mode')
1415	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
1416	152 FORMAT (' --> External pressure gradient directly prescribed by the user:'/, &
1417	2(1X,E12.5),'Pa/m', &
1418	' in x/y direction starting from dp_level_b =', F6.3, 'm', &
1419	A /)
1420	200 FORMAT (//' Run time and time step information:'/ &
1421	' ----------------------------------'/)
1422	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
1423	' CFL-factor: ',F4.2)
1424	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
1425	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
1426	' End time: ',F9.3,' s')
1427	204 FORMAT ( A,F9.3,' s')
1428	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
1429	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
1430	' CPU-time used: ',F9.3,' s per timestep: ', &
1431	' ',F9.3,' s'/ &
1432	' per second of simulated tim', &
1433	'e: ',F9.3,' s')
1434	250 FORMAT (//' Computational grid and domain size:'/ &
1435	' ----------------------------------'// &
1436	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
1437	' m dz = ',F7.3,' m'/ &
1438	' Domain size: x = ',F10.3,' m y = ',F10.3, &
1439	' m z(u) = ',F10.3,' m'/)
1440	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
1441	' factor: ',F5.3/ &
1442	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
1443	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
1444	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
1445	255 FORMAT (' Subdomains have equal size')
1446	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
1447	'have smaller sizes'/ &
1448	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
1449	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
1450	' degrees')
1451	270 FORMAT (//' Topography informations:'/ &
1452	' -----------------------'// &
1453	1X,'Topography: ',A)
1454	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
1455	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
1456	' / ',I4)
1457	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
1458	' direction' / &
1459	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
1460	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
1461	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
1462	' ------------------------------'// &
1463	' Canopy mode: ', A / &
1464	' Canopy top: ',I4 / &
1465	' Leaf drag coefficient: ',F6.2 /)
1466	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
1467	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
1468	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
1469	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
1470	' Height: ',A,' m'/ &
1471	' Leaf area density: ',A,' m2/m3'/ &
1472	' Gradient: ',A,' m2/m4'/ &
1473	' Gridpoint: ',A)
1474
1475	300 FORMAT (//' Boundary conditions:'/ &
1476	' -------------------'// &
1477	' p uv ', &
1478	' pt'// &
1479	' B. bound.: ',A/ &
1480	' T. bound.: ',A)
1481	301 FORMAT (/' ',A// &
1482	' B. bound.: ',A/ &
1483	' T. bound.: ',A)
1484	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
1485	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
1486	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
1487	'computational u,v-level:'// &
1488	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
1489	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1490	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
1491	307 FORMAT (' Heatflux has a random normal distribution')
1492	308 FORMAT (' Predefined surface temperature')
1493	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
1494	310 FORMAT (//' 1D-Model:'// &
1495	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1496	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
1497	312 FORMAT (' Predefined surface humidity')
1498	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
1499	314 FORMAT (' Predefined scalar value at the surface')
1500	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
1501	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
1502	'atmosphere model')
1503	317 FORMAT (//' Lateral boundaries:'/ &
1504	' left/right: ',A/ &
1505	' north/south: ',A)
1506	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
1507	'max =',F5.1,' m**2/s')
1508	319 FORMAT (' turbulence recycling at inflow switched on'/ &
1509	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
1510	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
1511	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
1512	' v: ',F9.6,' m2/s2')
1513	325 FORMAT (//' List output:'/ &
1514	' -----------'// &
1515	' 1D-Profiles:'/ &
1516	' Output every ',F8.2,' s')
1517	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
1518	' Averaging input every ',F8.2,' s')
1519	330 FORMAT (//' Data output:'/ &
1520	' -----------'/)
1521	331 FORMAT (/' 1D-Profiles:')
1522	332 FORMAT (/' ',A)
1523	333 FORMAT (' Output every ',F8.2,' s',/ &
1524	' Time averaged over ',F8.2,' s'/ &
1525	' Averaging input every ',F8.2,' s')
1526	334 FORMAT (/' 2D-Arrays',A,':')
1527	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1528	' Output every ',F8.2,' s ',A/ &
1529	' Cross sections at ',A1,' = ',A/ &
1530	' scalar-coordinates: ',A,' m'/)
1531	336 FORMAT (/' 3D-Arrays',A,':')
1532	337 FORMAT (/' Arrays: ',A/ &
1533	' Output every ',F8.2,' s ',A/ &
1534	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1535	338 FORMAT (' Compressed data output'/ &
1536	' Decimal precision: ',A/)
1537	339 FORMAT (' No output during initial ',F8.2,' s')
1538	340 FORMAT (/' Time series:')
1539	341 FORMAT (' Output every ',F8.2,' s'/)
1540	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1541	' Output every ',F8.2,' s ',A/ &
1542	' Time averaged over ',F8.2,' s'/ &
1543	' Averaging input every ',F8.2,' s'/ &
1544	' Cross sections at ',A1,' = ',A/ &
1545	' scalar-coordinates: ',A,' m'/)
1546	343 FORMAT (/' Arrays: ',A/ &
1547	' Output every ',F8.2,' s ',A/ &
1548	' Time averaged over ',F8.2,' s'/ &
1549	' Averaging input every ',F8.2,' s'/ &
1550	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1551	345 FORMAT (' Output format: ',A/)
1552	#if defined( __dvrp_graphics )
1553	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
1554	' Output every ',F7.1,' s'/ &
1555	' Output mode: ',A/ &
1556	' Host / User: ',A,' / ',A/ &
1557	' Directory: ',A// &
1558	' The sequence contains:')
1559	361 FORMAT (' Isosurface of ',A,' Threshold value: ', E12.3)
1560	362 FORMAT (' Sectional plane ',A)
1561	363 FORMAT (' Particles')
1562	364 FORMAT (/' Polygon reduction for topography: cluster_size = ', I1)
1563	#endif
1564	#if defined( __spectra )
1565	370 FORMAT (' Spectra:')
1566	371 FORMAT (' Output every ',F7.1,' s'/)
1567	372 FORMAT (' Arrays: ', 10(A5,',')/ &
1568	' Directions: ', 10(A5,',')/ &
1569	' height levels k = ', 20(I3,',')/ &
1570	' ', 20(I3,',')/ &
1571	' ', 20(I3,',')/ &
1572	' ', 20(I3,',')/ &
1573	' ', 19(I3,','),I3,'.'/ &
1574	' height levels selected for standard plot:'/ &
1575	' k = ', 20(I3,',')/ &
1576	' ', 20(I3,',')/ &
1577	' ', 20(I3,',')/ &
1578	' ', 20(I3,',')/ &
1579	' ', 19(I3,','),I3,'.'/ &
1580	' Time averaged over ', F7.1, ' s,' / &
1581	' Profiles for the time averaging are taken every ', &
1582	F6.1,' s')
1583	#endif
1584	400 FORMAT (//' Physical quantities:'/ &
1585	' -------------------'/)
1586	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
1587	' Geograph. latitude : phi = ',F4.1,' degr'/ &
1588	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
1589	' f* = ',F9.6,' 1/s')
1590	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
1591	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
1592	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
1593	415 FORMAT (/' Cloud physics parameters:'/ &
1594	' ------------------------'/)
1595	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
1596	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
1597	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
1598	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
1599	' Vapourization heat : L_v = ',E8.2,' J/kg')
1600	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
1601	' Height: ',A,' m'/ &
1602	' Temperature: ',A,' K'/ &
1603	' Gradient: ',A,' K/100m'/ &
1604	' Gridpoint: ',A)
1605	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
1606	' Height: ',A,' m'/ &
1607	' Humidity: ',A,' kg/kg'/ &
1608	' Gradient: ',A,' (kg/kg)/100m'/ &
1609	' Gridpoint: ',A)
1610	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
1611	' Height: ',A,' m'/ &
1612	' Scalar concentration: ',A,' kg/m**3'/ &
1613	' Gradient: ',A,' (kg/m**3)/100m'/ &
1614	' Gridpoint: ',A)
1615	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
1616	' Height: ',A,' m'/ &
1617	' ug: ',A,' m/s'/ &
1618	' Gradient: ',A,' 1/100s'/ &
1619	' Gridpoint: ',A)
1620	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
1621	' Height: ',A,' m'/ &
1622	' vg: ',A,' m/s'/ &
1623	' Gradient: ',A,' 1/100s'/ &
1624	' Gridpoint: ',A)
1625	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
1626	' Height: ',A,' m'/ &
1627	' Salinity: ',A,' psu'/ &
1628	' Gradient: ',A,' psu/100m'/ &
1629	' Gridpoint: ',A)
1630	450 FORMAT (//' LES / Turbulence quantities:'/ &
1631	' ---------------------------'/)
1632	451 FORMAT (' Diffusion coefficients are constant:'/ &
1633	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
1634	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
1635	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
1636	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
1637	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
1638	470 FORMAT (//' Actions during the simulation:'/ &
1639	' -----------------------------'/)
1640	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
1641	' Disturbance amplitude : ',F4.2, ' m/s'/ &
1642	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
1643	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
1644	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
1645	' to i/j =',I4)
1646	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
1647	1X,F5.3, ' m2/s2')
1648	474 FORMAT (' Random number generator used : ',A/)
1649	475 FORMAT (' The surface temperature is increased (or decreased, ', &
1650	'respectively, if'/ &
1651	' the value is negative) by ',F5.2,' K at the beginning of the',&
1652	' 3D-simulation'/)
1653	476 FORMAT (' The surface humidity is increased (or decreased, ',&
1654	'respectively, if the'/ &
1655	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
1656	' the 3D-simulation'/)
1657	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
1658	'respectively, if the'/ &
1659	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
1660	' the 3D-simulation'/)
1661	480 FORMAT (' Particles:'/ &
1662	' ---------'// &
1663	' Particle advection is active (switched on at t = ', F7.1, &
1664	' s)'/ &
1665	' Start of new particle generations every ',F6.1,' s'/ &
1666	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
1667	' bottom: ', A, ' top: ', A/&
1668	' Maximum particle age: ',F9.1,' s'/ &
1669	' Advection stopped at t = ',F9.1,' s'/ &
1670	' Particles are sorted every ',F9.1,' s'/)
1671	481 FORMAT (' Particles have random start positions'/)
1672	482 FORMAT (' Particles are advected only horizontally'/)
1673	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
1674	484 FORMAT (' Number of tails of the total domain: ',I10/ &
1675	' Minimum distance between tailpoints: ',F8.2,' m'/ &
1676	' Maximum age of the end of the tail: ',F8.2,' s')
1677	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
1678	486 FORMAT (' Particle statistics are written on file'/)
1679	487 FORMAT (' Number of particle groups: ',I2/)
1680	488 FORMAT (' SGS velocity components are used for particle advection'/ &
1681	' minimum timestep for advection: ', F7.5/)
1682	489 FORMAT (' Number of particles simultaneously released at each ', &
1683	'point: ', I5/)
1684	490 FORMAT (' Particle group ',I2,':'/ &
1685	' Particle radius: ',E10.3, 'm')
1686	491 FORMAT (' Particle inertia is activated'/ &
1687	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
1688	492 FORMAT (' Particles are advected only passively (no inertia)'/)
1689	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
1690	' y:',F8.1,' - ',F8.1,' m'/&
1691	' z:',F8.1,' - ',F8.1,' m'/&
1692	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
1693	' m dz = ',F8.1,' m'/)
1694	494 FORMAT (' Output of particle time series in NetCDF format every ', &
1695	F8.2,' s'/)
1696	495 FORMAT (' Number of particles in total domain: ',I10/)
1697	500 FORMAT (//' 1D-Model parameters:'/ &
1698	' -------------------'// &
1699	' Simulation time: ',F8.1,' s'/ &
1700	' Run-controll output every: ',F8.1,' s'/ &
1701	' Vertical profile output every: ',F8.1,' s'/ &
1702	' Mixing length calculation: ',A/ &
1703	' Dissipation calculation: ',A/)
1704	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
1705
1706
1707	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |