Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 250

Last change on this file since 250 was 241, checked in by letzel, 15 years ago
Option to predefine a target bulk velocity for conserve_volume_flow
Property svn:keywords set to `Id`
File size: 65.5 KB

Line
1	SUBROUTINE header
2
3	!------------------------------------------------------------------------------!
4	! Actual revisions:
5	! -----------------
6	! Output of cluster_size
7	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
8	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
9	! dp_smooth, dpdxy, u_bulk, v_bulk
10	!
11	! Former revisions:
12	! -----------------
13	! $Id: header.f90 241 2009-02-19 16:08:56Z letzel $
14	!
15	! 206 2008-10-13 14:59:11Z raasch
16	! Bugfix: error in zu index in case of section_xy = -1
17	!
18	! 198 2008-09-17 08:55:28Z raasch
19	! Format adjustments allowing output of larger revision numbers
20	!
21	! 197 2008-09-16 15:29:03Z raasch
22	! allow 100 spectra levels instead of 10 for consistency with
23	! define_netcdf_header,
24	! bugfix in the output of the characteristic levels of potential temperature,
25	! geostrophic wind, scalar concentration, humidity and leaf area density,
26	! output of turbulence recycling informations
27	!
28	! 138 2007-11-28 10:03:58Z letzel
29	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
30	! Allow two instead of one digit to specify isosurface and slicer variables.
31	! Output of sorting frequency of particles
32	!
33	! 108 2007-08-24 15:10:38Z letzel
34	! Output of informations for coupled model runs (boundary conditions etc.)
35	! + output of momentumfluxes at the top boundary
36	! Rayleigh damping for ocean, e_init
37	!
38	! 97 2007-06-21 08:23:15Z raasch
39	! Adjustments for the ocean version.
40	! use_pt_reference renamed use_reference
41	!
42	! 87 2007-05-22 15:46:47Z raasch
43	! Bugfix: output of use_upstream_for_tke
44	!
45	! 82 2007-04-16 15:40:52Z raasch
46	! Preprocessor strings for different linux clusters changed to "lc",
47	! routine local_flush is used for buffer flushing
48	!
49	! 76 2007-03-29 00:58:32Z raasch
50	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
51	! output of the loop optimization method, moisture renamed humidity,
52	! output of subversion revision number
53	!
54	! 19 2007-02-23 04:53:48Z raasch
55	! Output of scalar flux applied at top boundary
56	!
57	! RCS Log replace by Id keyword, revision history cleaned up
58	!
59	! Revision 1.63 2006/08/22 13:53:13 raasch
60	! Output of dz_max
61	!
62	! Revision 1.1 1997/08/11 06:17:20 raasch
63	! Initial revision
64	!
65	!
66	! Description:
67	! ------------
68	! Writing a header with all important informations about the actual run.
69	! This subroutine is called three times, two times at the beginning
70	! (writing information on files RUN_CONTROL and HEADER) and one time at the
71	! end of the run, then writing additional information about CPU-usage on file
72	! header.
73	!------------------------------------------------------------------------------!
74
75	USE arrays_3d
76	USE control_parameters
77	USE cloud_parameters
78	USE cpulog
79	USE dvrp_variables
80	USE grid_variables
81	USE indices
82	USE model_1d
83	USE particle_attributes
84	USE pegrid
85	USE spectrum
86
87	IMPLICIT NONE
88
89	CHARACTER (LEN=1) :: prec
90	CHARACTER (LEN=2) :: do2d_mode
91	CHARACTER (LEN=5) :: section_chr
92	CHARACTER (LEN=9) :: time_to_string
93	CHARACTER (LEN=10) :: coor_chr, host_chr
94	CHARACTER (LEN=16) :: begin_chr
95	CHARACTER (LEN=23) :: ver_rev
96	CHARACTER (LEN=40) :: output_format
97	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
98	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
99	run_classification
100	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
101	temperatures, ugcomponent, vgcomponent
102	CHARACTER (LEN=85) :: roben, runten
103
104	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, cwx, cwy, cxl, cxr, &
105	cyn, cys, i, ihost, io, j, l, ll
106	REAL :: cpuseconds_per_simulated_second
107
108	!
109	!-- Open the output file. At the end of the simulation, output is directed
110	!-- to unit 19.
111	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
112	.NOT. simulated_time_at_begin /= simulated_time ) THEN
113	io = 15 ! header output on file RUN_CONTROL
114	ELSE
115	io = 19 ! header output on file HEADER
116	ENDIF
117	CALL check_open( io )
118
119	!
120	!-- At the end of the run, output file (HEADER) will be rewritten with
121	!-- new informations
122	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
123
124	!
125	!-- Determine kind of model run
126	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
127	run_classification = '3D - restart run'
128	ELSEIF ( TRIM( initializing_actions ) == 'read_data_for_recycling' ) THEN
129	run_classification = '3D - run using 3D - prerun data'
130	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
131	run_classification = '3D - run without 1D - prerun'
132	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
133	run_classification = '3D - run with 1D - prerun'
134	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
135	run_classification = '3D - run initialized by user'
136	ELSE
137	PRINT*,'+++ header: unknown action(s): ',initializing_actions
138	ENDIF
139	IF ( ocean ) THEN
140	run_classification = 'ocean - ' // run_classification
141	ELSE
142	run_classification = 'atmosphere - ' // run_classification
143	ENDIF
144
145	!
146	!-- Run-identification, date, time, host
147	host_chr = host(1:10)
148	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
149	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
150	IF ( coupling_mode /= 'uncoupled' ) WRITE ( io, 101 ) coupling_mode
151	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
152	ADJUSTR( host_chr )
153	#if defined( __parallel )
154	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
155	char1 = 'calculated'
156	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
157	host(1:2) == 'lc' ) .AND. &
158	npex == -1 .AND. pdims(2) == 1 ) THEN
159	char1 = 'forced'
160	ELSE
161	char1 = 'predefined'
162	ENDIF
163	IF ( threads_per_task == 1 ) THEN
164	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
165	ELSE
166	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
167	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
168	ENDIF
169	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
170	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
171	npex == -1 .AND. pdims(2) == 1 ) &
172	THEN
173	WRITE ( io, 106 )
174	ELSEIF ( pdims(2) == 1 ) THEN
175	WRITE ( io, 107 ) 'x'
176	ELSEIF ( pdims(1) == 1 ) THEN
177	WRITE ( io, 107 ) 'y'
178	ENDIF
179	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
180	#endif
181	WRITE ( io, 99 )
182
183	!
184	!-- Numerical schemes
185	WRITE ( io, 110 )
186	IF ( psolver(1:7) == 'poisfft' ) THEN
187	WRITE ( io, 111 ) TRIM( fft_method )
188	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
189	ELSEIF ( psolver == 'sor' ) THEN
190	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
191	ELSEIF ( psolver == 'multigrid' ) THEN
192	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
193	IF ( mg_cycles == -1 ) THEN
194	WRITE ( io, 140 ) residual_limit
195	ELSE
196	WRITE ( io, 141 ) mg_cycles
197	ENDIF
198	IF ( mg_switch_to_pe0_level == 0 ) THEN
199	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
200	nzt_mg(1)
201	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
202	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
203	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
204	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
205	nzt_mg(mg_switch_to_pe0_level), &
206	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
207	nzt_mg(1)
208	ENDIF
209	ENDIF
210	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
211	THEN
212	WRITE ( io, 142 )
213	ENDIF
214
215	IF ( momentum_advec == 'pw-scheme' ) THEN
216	WRITE ( io, 113 )
217	ELSE
218	WRITE ( io, 114 )
219	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
220	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
221	overshoot_limit_w /= 0.0 ) THEN
222	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
223	overshoot_limit_w
224	ENDIF
225	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
226	ups_limit_w /= 0.0 ) &
227	THEN
228	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
229	ENDIF
230	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
231	ENDIF
232	IF ( scalar_advec == 'pw-scheme' ) THEN
233	WRITE ( io, 116 )
234	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
235	WRITE ( io, 117 )
236	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
237	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
238	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
239	ENDIF
240	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
241	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
242	ENDIF
243	ELSE
244	WRITE ( io, 118 )
245	ENDIF
246
247	WRITE ( io, 139 ) TRIM( loop_optimization )
248
249	IF ( galilei_transformation ) THEN
250	IF ( use_ug_for_galilei_tr ) THEN
251	char1 = 'geostrophic wind'
252	ELSE
253	char1 = 'mean wind in model domain'
254	ENDIF
255	IF ( simulated_time_at_begin == simulated_time ) THEN
256	char2 = 'at the start of the run'
257	ELSE
258	char2 = 'at the end of the run'
259	ENDIF
260	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
261	advected_distance_x/1000.0, advected_distance_y/1000.0
262	ENDIF
263	IF ( timestep_scheme == 'leapfrog' ) THEN
264	WRITE ( io, 120 )
265	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
266	WRITE ( io, 121 )
267	ELSE
268	WRITE ( io, 122 ) timestep_scheme
269	ENDIF
270	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
271	IF ( rayleigh_damping_factor /= 0.0 ) THEN
272	IF ( .NOT. ocean ) THEN
273	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
274	rayleigh_damping_factor
275	ELSE
276	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
277	rayleigh_damping_factor
278	ENDIF
279	ENDIF
280	IF ( humidity ) THEN
281	IF ( .NOT. cloud_physics ) THEN
282	WRITE ( io, 129 )
283	ELSE
284	WRITE ( io, 130 )
285	WRITE ( io, 131 )
286	IF ( radiation ) WRITE ( io, 132 )
287	IF ( precipitation ) WRITE ( io, 133 )
288	ENDIF
289	ENDIF
290	IF ( passive_scalar ) WRITE ( io, 134 )
291	IF ( conserve_volume_flow ) THEN
292	WRITE ( io, 150 ) conserve_volume_flow_mode
293	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
294	WRITE ( io, 151 ) u_bulk, v_bulk
295	ENDIF
296	ELSEIF ( dp_external ) THEN
297	IF ( dp_smooth ) THEN
298	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
299	ELSE
300	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
301	ENDIF
302	ENDIF
303	WRITE ( io, 99 )
304
305	!
306	!-- Runtime and timestep informations
307	WRITE ( io, 200 )
308	IF ( .NOT. dt_fixed ) THEN
309	WRITE ( io, 201 ) dt_max, cfl_factor
310	ELSE
311	WRITE ( io, 202 ) dt
312	ENDIF
313	WRITE ( io, 203 ) simulated_time_at_begin, end_time
314
315	IF ( time_restart /= 9999999.9 .AND. &
316	simulated_time_at_begin == simulated_time ) THEN
317	IF ( dt_restart == 9999999.9 ) THEN
318	WRITE ( io, 204 ) ' Restart at: ',time_restart
319	ELSE
320	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
321	ENDIF
322	ENDIF
323
324	IF ( simulated_time_at_begin /= simulated_time ) THEN
325	i = MAX ( log_point_s(10)%counts, 1 )
326	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
327	cpuseconds_per_simulated_second = 0.0
328	ELSE
329	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
330	( simulated_time - &
331	simulated_time_at_begin )
332	ENDIF
333	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
334	log_point_s(10)%sum / REAL( i ), &
335	cpuseconds_per_simulated_second
336	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
337	IF ( dt_restart == 9999999.9 ) THEN
338	WRITE ( io, 204 ) ' Next restart at: ',time_restart
339	ELSE
340	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
341	ENDIF
342	ENDIF
343	ENDIF
344
345	!
346	!-- Computational grid
347	IF ( .NOT. ocean ) THEN
348	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
349	IF ( dz_stretch_level_index < nzt+1 ) THEN
350	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
351	dz_stretch_factor, dz_max
352	ENDIF
353	ELSE
354	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
355	IF ( dz_stretch_level_index > 0 ) THEN
356	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
357	dz_stretch_factor, dz_max
358	ENDIF
359	ENDIF
360	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
361	MIN( nnz+2, nzt+2 )
362	IF ( numprocs > 1 ) THEN
363	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
364	WRITE ( io, 255 )
365	ELSE
366	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
367	ENDIF
368	ENDIF
369	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
370
371	!
372	!-- Topography
373	WRITE ( io, 270 ) topography
374	SELECT CASE ( TRIM( topography ) )
375
376	CASE ( 'flat' )
377	! no actions necessary
378
379	CASE ( 'single_building' )
380	blx = INT( building_length_x / dx )
381	bly = INT( building_length_y / dy )
382	bh = INT( building_height / dz )
383
384	IF ( building_wall_left == 9999999.9 ) THEN
385	building_wall_left = ( nx + 1 - blx ) / 2 * dx
386	ENDIF
387	bxl = INT ( building_wall_left / dx + 0.5 )
388	bxr = bxl + blx
389
390	IF ( building_wall_south == 9999999.9 ) THEN
391	building_wall_south = ( ny + 1 - bly ) / 2 * dy
392	ENDIF
393	bys = INT ( building_wall_south / dy + 0.5 )
394	byn = bys + bly
395
396	WRITE ( io, 271 ) building_length_x, building_length_y, &
397	building_height, bxl, bxr, bys, byn
398
399	CASE ( 'single_street_canyon' )
400	ch = NINT( canyon_height / dz )
401	IF ( canyon_width_x /= 9999999.9 ) THEN
402	!
403	!-- Street canyon in y direction
404	cwx = NINT( canyon_width_x / dx )
405	IF ( canyon_wall_left == 9999999.9 ) THEN
406	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
407	ENDIF
408	cxl = NINT( canyon_wall_left / dx )
409	cxr = cxl + cwx
410	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
411
412	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
413	!
414	!-- Street canyon in x direction
415	cwy = NINT( canyon_width_y / dy )
416	IF ( canyon_wall_south == 9999999.9 ) THEN
417	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
418	ENDIF
419	cys = NINT( canyon_wall_south / dy )
420	cyn = cys + cwy
421	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
422	ENDIF
423
424	END SELECT
425
426	IF ( plant_canopy ) THEN
427
428	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
429	IF ( passive_scalar ) THEN
430	WRITE ( io, 281 ) scalar_exchange_coefficient, &
431	leaf_surface_concentration
432	ENDIF
433
434	!
435	!-- Heat flux at the top of vegetation
436	WRITE ( io, 282 ) cthf
437
438	!
439	!-- Leaf area density profile
440	!-- Building output strings, starting with surface value
441	WRITE ( learde, '(F6.2)' ) lad_surface
442	gradients = '------'
443	slices = ' 0'
444	coordinates = ' 0.0'
445	i = 1
446	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
447
448	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
449	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
450
451	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
452	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
453
454	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
455	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
456
457	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
458	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
459
460	i = i + 1
461	ENDDO
462
463	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
464	TRIM( gradients ), TRIM( slices )
465
466	ENDIF
467
468	!
469	!-- Boundary conditions
470	IF ( ibc_p_b == 0 ) THEN
471	runten = 'p(0) = 0 \|'
472	ELSEIF ( ibc_p_b == 1 ) THEN
473	runten = 'p(0) = p(1) \|'
474	ELSE
475	runten = 'p(0) = p(1) +R\|'
476	ENDIF
477	IF ( ibc_p_t == 0 ) THEN
478	roben = 'p(nzt+1) = 0 \|'
479	ELSE
480	roben = 'p(nzt+1) = p(nzt) \|'
481	ENDIF
482
483	IF ( ibc_uv_b == 0 ) THEN
484	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
485	ELSE
486	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
487	ENDIF
488	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
489	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
490	ELSEIF ( ibc_uv_t == 0 ) THEN
491	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
492	ELSE
493	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
494	ENDIF
495
496	IF ( ibc_pt_b == 0 ) THEN
497	runten = TRIM( runten ) // ' pt(0) = pt_surface'
498	ELSEIF ( ibc_pt_b == 1 ) THEN
499	runten = TRIM( runten ) // ' pt(0) = pt(1)'
500	ELSEIF ( ibc_pt_b == 2 ) THEN
501	runten = TRIM( runten ) // ' pt(0) = from coupled model'
502	ENDIF
503	IF ( ibc_pt_t == 0 ) THEN
504	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
505	ELSEIF( ibc_pt_t == 1 ) THEN
506	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
507	ELSEIF( ibc_pt_t == 2 ) THEN
508	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
509	ENDIF
510
511	WRITE ( io, 300 ) runten, roben
512
513	IF ( .NOT. constant_diffusion ) THEN
514	IF ( ibc_e_b == 1 ) THEN
515	runten = 'e(0) = e(1)'
516	ELSE
517	runten = 'e(0) = e(1) = (u/0.1)*2'
518	ENDIF
519	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
520
521	WRITE ( io, 301 ) 'e', runten, roben
522
523	ENDIF
524
525	IF ( ocean ) THEN
526	runten = 'sa(0) = sa(1)'
527	IF ( ibc_sa_t == 0 ) THEN
528	roben = 'sa(nzt+1) = sa_surface'
529	ELSE
530	roben = 'sa(nzt+1) = sa(nzt)'
531	ENDIF
532	WRITE ( io, 301 ) 'sa', runten, roben
533	ENDIF
534
535	IF ( humidity ) THEN
536	IF ( ibc_q_b == 0 ) THEN
537	runten = 'q(0) = q_surface'
538	ELSE
539	runten = 'q(0) = q(1)'
540	ENDIF
541	IF ( ibc_q_t == 0 ) THEN
542	roben = 'q(nzt) = q_top'
543	ELSE
544	roben = 'q(nzt) = q(nzt-1) + dq/dz'
545	ENDIF
546	WRITE ( io, 301 ) 'q', runten, roben
547	ENDIF
548
549	IF ( passive_scalar ) THEN
550	IF ( ibc_q_b == 0 ) THEN
551	runten = 's(0) = s_surface'
552	ELSE
553	runten = 's(0) = s(1)'
554	ENDIF
555	IF ( ibc_q_t == 0 ) THEN
556	roben = 's(nzt) = s_top'
557	ELSE
558	roben = 's(nzt) = s(nzt-1) + ds/dz'
559	ENDIF
560	WRITE ( io, 301 ) 's', runten, roben
561	ENDIF
562
563	IF ( use_surface_fluxes ) THEN
564	WRITE ( io, 303 )
565	IF ( constant_heatflux ) THEN
566	WRITE ( io, 306 ) surface_heatflux
567	IF ( random_heatflux ) WRITE ( io, 307 )
568	ENDIF
569	IF ( humidity .AND. constant_waterflux ) THEN
570	WRITE ( io, 311 ) surface_waterflux
571	ENDIF
572	IF ( passive_scalar .AND. constant_waterflux ) THEN
573	WRITE ( io, 313 ) surface_waterflux
574	ENDIF
575	ENDIF
576
577	IF ( use_top_fluxes ) THEN
578	WRITE ( io, 304 )
579	IF ( coupling_mode == 'uncoupled' ) THEN
580	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
581	IF ( constant_top_heatflux ) THEN
582	WRITE ( io, 306 ) top_heatflux
583	ENDIF
584	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
585	WRITE ( io, 316 )
586	ENDIF
587	IF ( ocean .AND. constant_top_salinityflux ) THEN
588	WRITE ( io, 309 ) top_salinityflux
589	ENDIF
590	IF ( humidity .OR. passive_scalar ) THEN
591	WRITE ( io, 315 )
592	ENDIF
593	ENDIF
594
595	IF ( prandtl_layer ) THEN
596	WRITE ( io, 305 ) 0.5 * (zu(1)-zu(0)), roughness_length, kappa, &
597	rif_min, rif_max
598	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
599	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
600	WRITE ( io, 312 )
601	ENDIF
602	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
603	WRITE ( io, 314 )
604	ENDIF
605	ELSE
606	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
607	WRITE ( io, 310 ) rif_min, rif_max
608	ENDIF
609	ENDIF
610
611	WRITE ( io, 317 ) bc_lr, bc_ns
612	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
613	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
614	IF ( turbulent_inflow ) THEN
615	WRITE ( io, 319 ) recycling_width, recycling_plane, &
616	inflow_damping_height, inflow_damping_width
617	ENDIF
618	ENDIF
619
620	!
621	!-- Listing of 1D-profiles
622	WRITE ( io, 325 ) dt_dopr_listing
623	IF ( averaging_interval_pr /= 0.0 ) THEN
624	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
625	ENDIF
626
627	!
628	!-- DATA output
629	WRITE ( io, 330 )
630	IF ( averaging_interval_pr /= 0.0 ) THEN
631	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
632	ENDIF
633
634	!
635	!-- 1D-profiles
636	dopr_chr = 'Profile:'
637	IF ( dopr_n /= 0 ) THEN
638	WRITE ( io, 331 )
639
640	output_format = ''
641	IF ( netcdf_output ) THEN
642	IF ( netcdf_64bit ) THEN
643	output_format = 'netcdf (64 bit offset)'
644	ELSE
645	output_format = 'netcdf'
646	ENDIF
647	ENDIF
648	IF ( profil_output ) THEN
649	IF ( netcdf_output ) THEN
650	output_format = TRIM( output_format ) // ' and profil'
651	ELSE
652	output_format = 'profil'
653	ENDIF
654	ENDIF
655	WRITE ( io, 345 ) output_format
656
657	DO i = 1, dopr_n
658	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
659	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
660	WRITE ( io, 332 ) dopr_chr
661	dopr_chr = ' :'
662	ENDIF
663	ENDDO
664
665	IF ( dopr_chr /= '' ) THEN
666	WRITE ( io, 332 ) dopr_chr
667	ENDIF
668	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
669	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
670	ENDIF
671
672	!
673	!-- 2D-arrays
674	DO av = 0, 1
675
676	i = 1
677	do2d_xy = ''
678	do2d_xz = ''
679	do2d_yz = ''
680	DO WHILE ( do2d(av,i) /= ' ' )
681
682	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
683	do2d_mode = do2d(av,i)(l-1:l)
684
685	SELECT CASE ( do2d_mode )
686	CASE ( 'xy' )
687	ll = LEN_TRIM( do2d_xy )
688	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
689	CASE ( 'xz' )
690	ll = LEN_TRIM( do2d_xz )
691	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
692	CASE ( 'yz' )
693	ll = LEN_TRIM( do2d_yz )
694	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
695	END SELECT
696
697	i = i + 1
698
699	ENDDO
700
701	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
702	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
703	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
704	( netcdf_output .OR. iso2d_output ) ) THEN
705
706	IF ( av == 0 ) THEN
707	WRITE ( io, 334 ) ''
708	ELSE
709	WRITE ( io, 334 ) '(time-averaged)'
710	ENDIF
711
712	IF ( do2d_at_begin ) THEN
713	begin_chr = 'and at the start'
714	ELSE
715	begin_chr = ''
716	ENDIF
717
718	output_format = ''
719	IF ( netcdf_output ) THEN
720	IF ( netcdf_64bit ) THEN
721	output_format = 'netcdf (64 bit offset)'
722	ELSE
723	output_format = 'netcdf'
724	ENDIF
725	ENDIF
726	IF ( iso2d_output ) THEN
727	IF ( netcdf_output ) THEN
728	output_format = TRIM( output_format ) // ' and iso2d'
729	ELSE
730	output_format = 'iso2d'
731	ENDIF
732	ENDIF
733	WRITE ( io, 345 ) output_format
734
735	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
736	i = 1
737	slices = '/'
738	coordinates = '/'
739	!
740	!-- Building strings with index and coordinate informations of the
741	!-- slices
742	DO WHILE ( section(i,1) /= -9999 )
743
744	WRITE (section_chr,'(I5)') section(i,1)
745	section_chr = ADJUSTL( section_chr )
746	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
747
748	IF ( section(i,1) == -1 ) THEN
749	WRITE (coor_chr,'(F10.1)') -1.0
750	ELSE
751	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
752	ENDIF
753	coor_chr = ADJUSTL( coor_chr )
754	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
755
756	i = i + 1
757	ENDDO
758	IF ( av == 0 ) THEN
759	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
760	TRIM( begin_chr ), 'k', TRIM( slices ), &
761	TRIM( coordinates )
762	IF ( skip_time_do2d_xy /= 0.0 ) THEN
763	WRITE ( io, 339 ) skip_time_do2d_xy
764	ENDIF
765	ELSE
766	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
767	TRIM( begin_chr ), averaging_interval, &
768	dt_averaging_input, 'k', TRIM( slices ), &
769	TRIM( coordinates )
770	IF ( skip_time_data_output_av /= 0.0 ) THEN
771	WRITE ( io, 339 ) skip_time_data_output_av
772	ENDIF
773	ENDIF
774
775	ENDIF
776
777	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
778	i = 1
779	slices = '/'
780	coordinates = '/'
781	!
782	!-- Building strings with index and coordinate informations of the
783	!-- slices
784	DO WHILE ( section(i,2) /= -9999 )
785
786	WRITE (section_chr,'(I5)') section(i,2)
787	section_chr = ADJUSTL( section_chr )
788	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
789
790	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
791	coor_chr = ADJUSTL( coor_chr )
792	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
793
794	i = i + 1
795	ENDDO
796	IF ( av == 0 ) THEN
797	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
798	TRIM( begin_chr ), 'j', TRIM( slices ), &
799	TRIM( coordinates )
800	IF ( skip_time_do2d_xz /= 0.0 ) THEN
801	WRITE ( io, 339 ) skip_time_do2d_xz
802	ENDIF
803	ELSE
804	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
805	TRIM( begin_chr ), averaging_interval, &
806	dt_averaging_input, 'j', TRIM( slices ), &
807	TRIM( coordinates )
808	IF ( skip_time_data_output_av /= 0.0 ) THEN
809	WRITE ( io, 339 ) skip_time_data_output_av
810	ENDIF
811	ENDIF
812	ENDIF
813
814	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
815	i = 1
816	slices = '/'
817	coordinates = '/'
818	!
819	!-- Building strings with index and coordinate informations of the
820	!-- slices
821	DO WHILE ( section(i,3) /= -9999 )
822
823	WRITE (section_chr,'(I5)') section(i,3)
824	section_chr = ADJUSTL( section_chr )
825	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
826
827	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
828	coor_chr = ADJUSTL( coor_chr )
829	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
830
831	i = i + 1
832	ENDDO
833	IF ( av == 0 ) THEN
834	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
835	TRIM( begin_chr ), 'i', TRIM( slices ), &
836	TRIM( coordinates )
837	IF ( skip_time_do2d_yz /= 0.0 ) THEN
838	WRITE ( io, 339 ) skip_time_do2d_yz
839	ENDIF
840	ELSE
841	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
842	TRIM( begin_chr ), averaging_interval, &
843	dt_averaging_input, 'i', TRIM( slices ), &
844	TRIM( coordinates )
845	IF ( skip_time_data_output_av /= 0.0 ) THEN
846	WRITE ( io, 339 ) skip_time_data_output_av
847	ENDIF
848	ENDIF
849	ENDIF
850
851	ENDIF
852
853	ENDDO
854
855	!
856	!-- 3d-arrays
857	DO av = 0, 1
858
859	i = 1
860	do3d_chr = ''
861	DO WHILE ( do3d(av,i) /= ' ' )
862
863	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
864	i = i + 1
865
866	ENDDO
867
868	IF ( do3d_chr /= '' ) THEN
869	IF ( av == 0 ) THEN
870	WRITE ( io, 336 ) ''
871	ELSE
872	WRITE ( io, 336 ) '(time-averaged)'
873	ENDIF
874
875	output_format = ''
876	IF ( netcdf_output ) THEN
877	IF ( netcdf_64bit .AND. netcdf_64bit_3d ) THEN
878	output_format = 'netcdf (64 bit offset)'
879	ELSE
880	output_format = 'netcdf'
881	ENDIF
882	ENDIF
883	IF ( avs_output ) THEN
884	IF ( netcdf_output ) THEN
885	output_format = TRIM( output_format ) // ' and avs'
886	ELSE
887	output_format = 'avs'
888	ENDIF
889	ENDIF
890	WRITE ( io, 345 ) output_format
891
892	IF ( do3d_at_begin ) THEN
893	begin_chr = 'and at the start'
894	ELSE
895	begin_chr = ''
896	ENDIF
897	IF ( av == 0 ) THEN
898	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
899	zu(nz_do3d), nz_do3d
900	ELSE
901	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
902	TRIM( begin_chr ), averaging_interval, &
903	dt_averaging_input, zu(nz_do3d), nz_do3d
904	ENDIF
905
906	IF ( do3d_compress ) THEN
907	do3d_chr = ''
908	i = 1
909	DO WHILE ( do3d(av,i) /= ' ' )
910
911	SELECT CASE ( do3d(av,i) )
912	CASE ( 'u' )
913	j = 1
914	CASE ( 'v' )
915	j = 2
916	CASE ( 'w' )
917	j = 3
918	CASE ( 'p' )
919	j = 4
920	CASE ( 'pt' )
921	j = 5
922	END SELECT
923	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
924	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
925	':' // prec // ','
926	i = i + 1
927
928	ENDDO
929	WRITE ( io, 338 ) do3d_chr
930
931	ENDIF
932
933	IF ( av == 0 ) THEN
934	IF ( skip_time_do3d /= 0.0 ) THEN
935	WRITE ( io, 339 ) skip_time_do3d
936	ENDIF
937	ELSE
938	IF ( skip_time_data_output_av /= 0.0 ) THEN
939	WRITE ( io, 339 ) skip_time_data_output_av
940	ENDIF
941	ENDIF
942
943	ENDIF
944
945	ENDDO
946
947	!
948	!-- Timeseries
949	IF ( dt_dots /= 9999999.9 ) THEN
950	WRITE ( io, 340 )
951
952	output_format = ''
953	IF ( netcdf_output ) THEN
954	IF ( netcdf_64bit ) THEN
955	output_format = 'netcdf (64 bit offset)'
956	ELSE
957	output_format = 'netcdf'
958	ENDIF
959	ENDIF
960	IF ( profil_output ) THEN
961	IF ( netcdf_output ) THEN
962	output_format = TRIM( output_format ) // ' and profil'
963	ELSE
964	output_format = 'profil'
965	ENDIF
966	ENDIF
967	WRITE ( io, 345 ) output_format
968	WRITE ( io, 341 ) dt_dots
969	ENDIF
970
971	#if defined( __dvrp_graphics )
972	!
973	!-- Dvrp-output
974	IF ( dt_dvrp /= 9999999.9 ) THEN
975	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
976	TRIM( dvrp_username ), TRIM( dvrp_directory )
977	i = 1
978	l = 0
979	DO WHILE ( mode_dvrp(i) /= ' ' )
980	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
981	READ ( mode_dvrp(i), '(10X,I2)' ) j
982	l = l + 1
983	IF ( do3d(0,j) /= ' ' ) THEN
984	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l)
985	ENDIF
986	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
987	READ ( mode_dvrp(i), '(6X,I2)' ) j
988	IF ( do2d(0,j) /= ' ' ) WRITE ( io, 362 ) TRIM( do2d(0,j) )
989	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
990	WRITE ( io, 363 )
991	ENDIF
992	i = i + 1
993	ENDDO
994
995	IF ( TRIM( topography ) /= 'flat' .AND. cluster_size > 1 ) THEN
996	WRITE ( io, 364 ) cluster_size
997	ENDIF
998
999	ENDIF
1000	#endif
1001
1002	#if defined( __spectra )
1003	!
1004	!-- Spectra output
1005	IF ( dt_dosp /= 9999999.9 ) THEN
1006	WRITE ( io, 370 )
1007
1008	output_format = ''
1009	IF ( netcdf_output ) THEN
1010	IF ( netcdf_64bit ) THEN
1011	output_format = 'netcdf (64 bit offset)'
1012	ELSE
1013	output_format = 'netcdf'
1014	ENDIF
1015	ENDIF
1016	IF ( profil_output ) THEN
1017	IF ( netcdf_output ) THEN
1018	output_format = TRIM( output_format ) // ' and profil'
1019	ELSE
1020	output_format = 'profil'
1021	ENDIF
1022	ENDIF
1023	WRITE ( io, 345 ) output_format
1024	WRITE ( io, 371 ) dt_dosp
1025	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
1026	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
1027	( spectra_direction(i), i = 1,10 ), &
1028	( comp_spectra_level(i), i = 1,100 ), &
1029	( plot_spectra_level(i), i = 1,100 ), &
1030	averaging_interval_sp, dt_averaging_input_pr
1031	ENDIF
1032	#endif
1033
1034	WRITE ( io, 99 )
1035
1036	!
1037	!-- Physical quantities
1038	WRITE ( io, 400 )
1039
1040	!
1041	!-- Geostrophic parameters
1042	WRITE ( io, 410 ) omega, phi, f, fs
1043
1044	!
1045	!-- Other quantities
1046	WRITE ( io, 411 ) g
1047	IF ( use_reference ) THEN
1048	IF ( ocean ) THEN
1049	WRITE ( io, 412 ) prho_reference
1050	ELSE
1051	WRITE ( io, 413 ) pt_reference
1052	ENDIF
1053	ENDIF
1054
1055	!
1056	!-- Cloud physics parameters
1057	IF ( cloud_physics ) THEN
1058	WRITE ( io, 415 )
1059	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
1060	ENDIF
1061
1062	!-- Profile of the geostrophic wind (component ug)
1063	!-- Building output strings
1064	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
1065	gradients = '------'
1066	slices = ' 0'
1067	coordinates = ' 0.0'
1068	i = 1
1069	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
1070
1071	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
1072	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
1073
1074	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
1075	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1076
1077	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
1078	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1079
1080	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
1081	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1082
1083	i = i + 1
1084	ENDDO
1085
1086	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
1087	TRIM( gradients ), TRIM( slices )
1088
1089	!-- Profile of the geostrophic wind (component vg)
1090	!-- Building output strings
1091	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
1092	gradients = '------'
1093	slices = ' 0'
1094	coordinates = ' 0.0'
1095	i = 1
1096	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
1097
1098	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
1099	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
1100
1101	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
1102	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1103
1104	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
1105	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1106
1107	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
1108	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1109
1110	i = i + 1
1111	ENDDO
1112
1113	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
1114	TRIM( gradients ), TRIM( slices )
1115
1116	!
1117	!-- Initial temperature profile
1118	!-- Building output strings, starting with surface temperature
1119	WRITE ( temperatures, '(F6.2)' ) pt_surface
1120	gradients = '------'
1121	slices = ' 0'
1122	coordinates = ' 0.0'
1123	i = 1
1124	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
1125
1126	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
1127	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1128
1129	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
1130	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1131
1132	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
1133	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1134
1135	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
1136	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1137
1138	i = i + 1
1139	ENDDO
1140
1141	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
1142	TRIM( gradients ), TRIM( slices )
1143
1144	!
1145	!-- Initial humidity profile
1146	!-- Building output strings, starting with surface humidity
1147	IF ( humidity .OR. passive_scalar ) THEN
1148	WRITE ( temperatures, '(E8.1)' ) q_surface
1149	gradients = '--------'
1150	slices = ' 0'
1151	coordinates = ' 0.0'
1152	i = 1
1153	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
1154
1155	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
1156	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1157
1158	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
1159	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1160
1161	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
1162	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1163
1164	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
1165	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1166
1167	i = i + 1
1168	ENDDO
1169
1170	IF ( humidity ) THEN
1171	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
1172	TRIM( gradients ), TRIM( slices )
1173	ELSE
1174	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
1175	TRIM( gradients ), TRIM( slices )
1176	ENDIF
1177	ENDIF
1178
1179	!
1180	!-- Initial salinity profile
1181	!-- Building output strings, starting with surface salinity
1182	IF ( ocean ) THEN
1183	WRITE ( temperatures, '(F6.2)' ) sa_surface
1184	gradients = '------'
1185	slices = ' 0'
1186	coordinates = ' 0.0'
1187	i = 1
1188	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
1189
1190	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
1191	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1192
1193	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
1194	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1195
1196	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
1197	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1198
1199	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
1200	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1201
1202	i = i + 1
1203	ENDDO
1204
1205	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
1206	TRIM( gradients ), TRIM( slices )
1207	ENDIF
1208
1209	!
1210	!-- LES / turbulence parameters
1211	WRITE ( io, 450 )
1212
1213	!--
1214	! ... LES-constants used must still be added here
1215	!--
1216	IF ( constant_diffusion ) THEN
1217	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
1218	prandtl_number
1219	ENDIF
1220	IF ( .NOT. constant_diffusion) THEN
1221	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
1222	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
1223	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
1224	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
1225	ENDIF
1226
1227	!
1228	!-- Special actions during the run
1229	WRITE ( io, 470 )
1230	IF ( create_disturbances ) THEN
1231	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
1232	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
1233	zu(disturbance_level_ind_t), disturbance_level_ind_t
1234	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1235	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
1236	ELSE
1237	WRITE ( io, 473 ) disturbance_energy_limit
1238	ENDIF
1239	WRITE ( io, 474 ) TRIM( random_generator )
1240	ENDIF
1241	IF ( pt_surface_initial_change /= 0.0 ) THEN
1242	WRITE ( io, 475 ) pt_surface_initial_change
1243	ENDIF
1244	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
1245	WRITE ( io, 476 ) q_surface_initial_change
1246	ENDIF
1247	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
1248	WRITE ( io, 477 ) q_surface_initial_change
1249	ENDIF
1250
1251	IF ( particle_advection ) THEN
1252	!
1253	!-- Particle attributes
1254	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
1255	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
1256	end_time_prel, dt_sort_particles
1257	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
1258	IF ( random_start_position ) WRITE ( io, 481 )
1259	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
1260	WRITE ( io, 495 ) total_number_of_particles
1261	IF ( .NOT. vertical_particle_advection ) WRITE ( io, 482 )
1262	IF ( maximum_number_of_tailpoints /= 0 ) THEN
1263	WRITE ( io, 483 ) maximum_number_of_tailpoints
1264	IF ( minimum_tailpoint_distance /= 0 ) THEN
1265	WRITE ( io, 484 ) total_number_of_tails, &
1266	minimum_tailpoint_distance, &
1267	maximum_tailpoint_age
1268	ENDIF
1269	ENDIF
1270	IF ( dt_write_particle_data /= 9999999.9 ) THEN
1271	WRITE ( io, 485 ) dt_write_particle_data
1272	output_format = ''
1273	IF ( netcdf_output ) THEN
1274	IF ( netcdf_64bit ) THEN
1275	output_format = 'netcdf (64 bit offset) and binary'
1276	ELSE
1277	output_format = 'netcdf and binary'
1278	ENDIF
1279	ELSE
1280	output_format = 'binary'
1281	ENDIF
1282	WRITE ( io, 345 ) output_format
1283	ENDIF
1284	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
1285	IF ( write_particle_statistics ) WRITE ( io, 486 )
1286
1287	WRITE ( io, 487 ) number_of_particle_groups
1288
1289	DO i = 1, number_of_particle_groups
1290	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
1291	WRITE ( io, 490 ) i, 0.0
1292	WRITE ( io, 492 )
1293	ELSE
1294	WRITE ( io, 490 ) i, radius(i)
1295	IF ( density_ratio(i) /= 0.0 ) THEN
1296	WRITE ( io, 491 ) density_ratio(i)
1297	ELSE
1298	WRITE ( io, 492 )
1299	ENDIF
1300	ENDIF
1301	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
1302	pdx(i), pdy(i), pdz(i)
1303	ENDDO
1304
1305	ENDIF
1306
1307
1308	!
1309	!-- Parameters of 1D-model
1310	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1311	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
1312	mixing_length_1d, dissipation_1d
1313	IF ( damp_level_ind_1d /= nzt+1 ) THEN
1314	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
1315	ENDIF
1316	ENDIF
1317
1318	!
1319	!-- User-defined informations
1320	CALL user_header( io )
1321
1322	WRITE ( io, 99 )
1323
1324	!
1325	!-- Write buffer contents to disc immediately
1326	CALL local_flush( io )
1327
1328	!
1329	!-- Here the FORMATs start
1330
1331	99 FORMAT (1X,78('-'))
1332	100 FORMAT (/1X,'***************************',9X,42('-')/ &
1333	1X,'* ',A,' *',9X,A/ &
1334	1X,'***************************',9X,42('-'))
1335	101 FORMAT (37X,'coupled run: ',A/ &
1336	37X,42('-'))
1337	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
1338	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
1339	' Run on host: ',A10)
1340	#if defined( __parallel )
1341	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
1342	')',1X,A)
1343	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
1344	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
1345	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
1346	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
1347	37X,'because the job is running on an SMP-cluster')
1348	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
1349	#endif
1350	110 FORMAT (/' Numerical Schemes:'/ &
1351	' -----------------'/)
1352	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
1353	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
1354	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
1355	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
1356	' or Upstream')
1357	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
1358	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
1359	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
1360	' or Upstream')
1361	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
1362	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
1363	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
1364	' Translation velocity = ',A/ &
1365	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
1366	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
1367	' of timestep changes)')
1368	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
1369	' timestep changes')
1370	122 FORMAT (' --> Time differencing scheme: ',A)
1371	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
1372	' maximum damping coefficient: ',F5.3, ' 1/s')
1373	124 FORMAT (' Spline-overshoots are being suppressed')
1374	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1375	' of'/ &
1376	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1377	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1378	' of'/ &
1379	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1380	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1381	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1382	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1383	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1384	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
1385	130 FORMAT (' --> Additional prognostic equation for the total water content')
1386	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
1387	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
1388	' effective emissivity scheme')
1389	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
1390	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
1391	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
1392	A,'-cycle)'/ &
1393	' number of grid levels: ',I2/ &
1394	' Gauss-Seidel red/black iterations: ',I2)
1395	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1396	I3,')')
1397	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
1398	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1399	I3,')'/ &
1400	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
1401	I3,')')
1402	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
1403	139 FORMAT (' --> Loop optimization method: ',A)
1404	140 FORMAT (' maximum residual allowed: ',E10.3)
1405	141 FORMAT (' fixed number of multigrid cycles: ',I4)
1406	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
1407	'step')
1408	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
1409	'kinetic energy')
1410	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
1411	'conserved'/ &
1412	' using the ',A,' mode')
1413	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
1414	152 FORMAT (' --> External pressure gradient directly prescribed by the user:'/, &
1415	2(1X,E12.5),'Pa/m', &
1416	' in x/y direction starting from dp_level_b =', F6.3, 'm', &
1417	A /)
1418	200 FORMAT (//' Run time and time step information:'/ &
1419	' ----------------------------------'/)
1420	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
1421	' CFL-factor: ',F4.2)
1422	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
1423	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
1424	' End time: ',F9.3,' s')
1425	204 FORMAT ( A,F9.3,' s')
1426	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
1427	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
1428	' CPU-time used: ',F9.3,' s per timestep: ', &
1429	' ',F9.3,' s'/ &
1430	' per second of simulated tim', &
1431	'e: ',F9.3,' s')
1432	250 FORMAT (//' Computational grid and domain size:'/ &
1433	' ----------------------------------'// &
1434	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
1435	' m dz = ',F7.3,' m'/ &
1436	' Domain size: x = ',F10.3,' m y = ',F10.3, &
1437	' m z(u) = ',F10.3,' m'/)
1438	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
1439	' factor: ',F5.3/ &
1440	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
1441	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
1442	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
1443	255 FORMAT (' Subdomains have equal size')
1444	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
1445	'have smaller sizes'/ &
1446	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
1447	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
1448	' degrees')
1449	270 FORMAT (//' Topography informations:'/ &
1450	' -----------------------'// &
1451	1X,'Topography: ',A)
1452	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
1453	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
1454	' / ',I4)
1455	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
1456	' direction' / &
1457	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
1458	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
1459	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
1460	' ------------------------------'// &
1461	' Canopy mode: ', A / &
1462	' Canopy top: ',I4 / &
1463	' Leaf drag coefficient: ',F6.2 /)
1464	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
1465	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
1466	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
1467	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
1468	' Height: ',A,' m'/ &
1469	' Leaf area density: ',A,' m2/m3'/ &
1470	' Gradient: ',A,' m2/m4'/ &
1471	' Gridpoint: ',A)
1472
1473	300 FORMAT (//' Boundary conditions:'/ &
1474	' -------------------'// &
1475	' p uv ', &
1476	' pt'// &
1477	' B. bound.: ',A/ &
1478	' T. bound.: ',A)
1479	301 FORMAT (/' ',A// &
1480	' B. bound.: ',A/ &
1481	' T. bound.: ',A)
1482	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
1483	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
1484	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
1485	'computational u,v-level:'// &
1486	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
1487	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1488	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
1489	307 FORMAT (' Heatflux has a random normal distribution')
1490	308 FORMAT (' Predefined surface temperature')
1491	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
1492	310 FORMAT (//' 1D-Model:'// &
1493	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1494	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
1495	312 FORMAT (' Predefined surface humidity')
1496	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
1497	314 FORMAT (' Predefined scalar value at the surface')
1498	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
1499	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
1500	'atmosphere model')
1501	317 FORMAT (//' Lateral boundaries:'/ &
1502	' left/right: ',A/ &
1503	' north/south: ',A)
1504	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
1505	'max =',F5.1,' m**2/s')
1506	319 FORMAT (' turbulence recycling at inflow switched on'/ &
1507	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
1508	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
1509	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
1510	' v: ',F9.6,' m2/s2')
1511	325 FORMAT (//' List output:'/ &
1512	' -----------'// &
1513	' 1D-Profiles:'/ &
1514	' Output every ',F8.2,' s')
1515	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
1516	' Averaging input every ',F8.2,' s')
1517	330 FORMAT (//' Data output:'/ &
1518	' -----------'/)
1519	331 FORMAT (/' 1D-Profiles:')
1520	332 FORMAT (/' ',A)
1521	333 FORMAT (' Output every ',F8.2,' s',/ &
1522	' Time averaged over ',F8.2,' s'/ &
1523	' Averaging input every ',F8.2,' s')
1524	334 FORMAT (/' 2D-Arrays',A,':')
1525	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1526	' Output every ',F8.2,' s ',A/ &
1527	' Cross sections at ',A1,' = ',A/ &
1528	' scalar-coordinates: ',A,' m'/)
1529	336 FORMAT (/' 3D-Arrays',A,':')
1530	337 FORMAT (/' Arrays: ',A/ &
1531	' Output every ',F8.2,' s ',A/ &
1532	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1533	338 FORMAT (' Compressed data output'/ &
1534	' Decimal precision: ',A/)
1535	339 FORMAT (' No output during initial ',F8.2,' s')
1536	340 FORMAT (/' Time series:')
1537	341 FORMAT (' Output every ',F8.2,' s'/)
1538	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1539	' Output every ',F8.2,' s ',A/ &
1540	' Time averaged over ',F8.2,' s'/ &
1541	' Averaging input every ',F8.2,' s'/ &
1542	' Cross sections at ',A1,' = ',A/ &
1543	' scalar-coordinates: ',A,' m'/)
1544	343 FORMAT (/' Arrays: ',A/ &
1545	' Output every ',F8.2,' s ',A/ &
1546	' Time averaged over ',F8.2,' s'/ &
1547	' Averaging input every ',F8.2,' s'/ &
1548	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1549	345 FORMAT (' Output format: ',A/)
1550	#if defined( __dvrp_graphics )
1551	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
1552	' Output every ',F7.1,' s'/ &
1553	' Output mode: ',A/ &
1554	' Host / User: ',A,' / ',A/ &
1555	' Directory: ',A// &
1556	' The sequence contains:')
1557	361 FORMAT (' Isosurface of ',A,' Threshold value: ', E12.3)
1558	362 FORMAT (' Sectional plane ',A)
1559	363 FORMAT (' Particles')
1560	364 FORMAT (/' Polygon reduction for topography: cluster_size = ', I1)
1561	#endif
1562	#if defined( __spectra )
1563	370 FORMAT (' Spectra:')
1564	371 FORMAT (' Output every ',F7.1,' s'/)
1565	372 FORMAT (' Arrays: ', 10(A5,',')/ &
1566	' Directions: ', 10(A5,',')/ &
1567	' height levels k = ', 20(I3,',')/ &
1568	' ', 20(I3,',')/ &
1569	' ', 20(I3,',')/ &
1570	' ', 20(I3,',')/ &
1571	' ', 19(I3,','),I3,'.'/ &
1572	' height levels selected for standard plot:'/ &
1573	' k = ', 20(I3,',')/ &
1574	' ', 20(I3,',')/ &
1575	' ', 20(I3,',')/ &
1576	' ', 20(I3,',')/ &
1577	' ', 19(I3,','),I3,'.'/ &
1578	' Time averaged over ', F7.1, ' s,' / &
1579	' Profiles for the time averaging are taken every ', &
1580	F6.1,' s')
1581	#endif
1582	400 FORMAT (//' Physical quantities:'/ &
1583	' -------------------'/)
1584	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
1585	' Geograph. latitude : phi = ',F4.1,' degr'/ &
1586	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
1587	' f* = ',F9.6,' 1/s')
1588	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
1589	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
1590	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
1591	415 FORMAT (/' Cloud physics parameters:'/ &
1592	' ------------------------'/)
1593	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
1594	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
1595	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
1596	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
1597	' Vapourization heat : L_v = ',E8.2,' J/kg')
1598	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
1599	' Height: ',A,' m'/ &
1600	' Temperature: ',A,' K'/ &
1601	' Gradient: ',A,' K/100m'/ &
1602	' Gridpoint: ',A)
1603	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
1604	' Height: ',A,' m'/ &
1605	' Humidity: ',A,' kg/kg'/ &
1606	' Gradient: ',A,' (kg/kg)/100m'/ &
1607	' Gridpoint: ',A)
1608	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
1609	' Height: ',A,' m'/ &
1610	' Scalar concentration: ',A,' kg/m**3'/ &
1611	' Gradient: ',A,' (kg/m**3)/100m'/ &
1612	' Gridpoint: ',A)
1613	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
1614	' Height: ',A,' m'/ &
1615	' ug: ',A,' m/s'/ &
1616	' Gradient: ',A,' 1/100s'/ &
1617	' Gridpoint: ',A)
1618	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
1619	' Height: ',A,' m'/ &
1620	' vg: ',A,' m/s'/ &
1621	' Gradient: ',A,' 1/100s'/ &
1622	' Gridpoint: ',A)
1623	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
1624	' Height: ',A,' m'/ &
1625	' Salinity: ',A,' psu'/ &
1626	' Gradient: ',A,' psu/100m'/ &
1627	' Gridpoint: ',A)
1628	450 FORMAT (//' LES / Turbulence quantities:'/ &
1629	' ---------------------------'/)
1630	451 FORMAT (' Diffusion coefficients are constant:'/ &
1631	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
1632	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
1633	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
1634	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
1635	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
1636	470 FORMAT (//' Actions during the simulation:'/ &
1637	' -----------------------------'/)
1638	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
1639	' Disturbance amplitude : ',F4.2, ' m/s'/ &
1640	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
1641	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
1642	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
1643	' to i/j =',I4)
1644	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
1645	1X,F5.3, ' m2/s2')
1646	474 FORMAT (' Random number generator used : ',A/)
1647	475 FORMAT (' The surface temperature is increased (or decreased, ', &
1648	'respectively, if'/ &
1649	' the value is negative) by ',F5.2,' K at the beginning of the',&
1650	' 3D-simulation'/)
1651	476 FORMAT (' The surface humidity is increased (or decreased, ',&
1652	'respectively, if the'/ &
1653	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
1654	' the 3D-simulation'/)
1655	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
1656	'respectively, if the'/ &
1657	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
1658	' the 3D-simulation'/)
1659	480 FORMAT (' Particles:'/ &
1660	' ---------'// &
1661	' Particle advection is active (switched on at t = ', F7.1, &
1662	' s)'/ &
1663	' Start of new particle generations every ',F6.1,' s'/ &
1664	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
1665	' bottom: ', A, ' top: ', A/&
1666	' Maximum particle age: ',F9.1,' s'/ &
1667	' Advection stopped at t = ',F9.1,' s'/ &
1668	' Particles are sorted every ',F9.1,' s'/)
1669	481 FORMAT (' Particles have random start positions'/)
1670	482 FORMAT (' Particles are advected only horizontally'/)
1671	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
1672	484 FORMAT (' Number of tails of the total domain: ',I10/ &
1673	' Minimum distance between tailpoints: ',F8.2,' m'/ &
1674	' Maximum age of the end of the tail: ',F8.2,' s')
1675	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
1676	486 FORMAT (' Particle statistics are written on file'/)
1677	487 FORMAT (' Number of particle groups: ',I2/)
1678	488 FORMAT (' SGS velocity components are used for particle advection'/ &
1679	' minimum timestep for advection: ', F7.5/)
1680	489 FORMAT (' Number of particles simultaneously released at each ', &
1681	'point: ', I5/)
1682	490 FORMAT (' Particle group ',I2,':'/ &
1683	' Particle radius: ',E10.3, 'm')
1684	491 FORMAT (' Particle inertia is activated'/ &
1685	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
1686	492 FORMAT (' Particles are advected only passively (no inertia)'/)
1687	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
1688	' y:',F8.1,' - ',F8.1,' m'/&
1689	' z:',F8.1,' - ',F8.1,' m'/&
1690	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
1691	' m dz = ',F8.1,' m'/)
1692	494 FORMAT (' Output of particle time series in NetCDF format every ', &
1693	F8.2,' s'/)
1694	495 FORMAT (' Number of particles in total domain: ',I10/)
1695	500 FORMAT (//' 1D-Model parameters:'/ &
1696	' -------------------'// &
1697	' Simulation time: ',F8.1,' s'/ &
1698	' Run-controll output every: ',F8.1,' s'/ &
1699	' Vertical profile output every: ',F8.1,' s'/ &
1700	' Mixing length calculation: ',A/ &
1701	' Dissipation calculation: ',A/)
1702	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
1703
1704
1705	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |