Home

Context Navigation

header.f90 @ 113

Last change on this file since 113 was 110, checked in by raasch, 17 years ago

New:
---
Allows runs for a coupled atmosphere-ocean LES,
coupling frequency is controlled by new d3par-parameter dt_coupling,
the coupling mode (atmosphere_to_ocean or ocean_to_atmosphere) for the
respective processes is read from environment variable coupling_mode,
which is set by the mpiexec-command,
communication between the two models is done using the intercommunicator
comm_inter,
local files opened by the ocean model get the additional suffic "_O".
Assume saturation at k=nzb_s_inner(j,i) for atmosphere coupled to ocean.

A momentum flux can be set as top boundary condition using the new
inipar parameter top_momentumflux_u|v.

Non-cyclic boundary conditions can be used along all horizontal directions.

Quantities w*p* and w"e can be output as vertical profiles.

Initial profiles are reset to constant profiles in case that initializing_actions /= 'set_constant_profiles'. (init_rankine)

Optionally calculate km and kh from initial TKE e_init.

Changed:

Remaining variables iran changed to iran_part (advec_particles, init_particles).

In case that the presure solver is not called for every Runge-Kutta substep
(call_psolver_at_all_substeps = .F.), it is called after the first substep
instead of the last. In that case, random perturbations are also added to the
velocity field after the first substep.

Initialization of km,kh = 0.00001 for ocean = .T. (for ocean = .F. it remains 0.01).

Allow data_output_pr= q, wq, w"q", w*q* for humidity = .T. (instead of cloud_physics = .T.).

Errors:

Bugs from code parts for non-cyclic boundary conditions are removed: loops for
u and v are starting from index nxlu, nysv, respectively. The radiation boundary
condition is used for every Runge-Kutta substep. Velocity phase speeds for
the radiation boundary conditions are calculated for the first Runge-Kutta
substep only and reused for the further substeps. New arrays c_u, c_v, and c_w
are defined for this purpose. Several index errors are removed from the
radiation boundary condition code parts. Upper bounds for calculating
u_0 and v_0 (in production_e) are nxr+1 and nyn+1 because otherwise these
values are not available in case of non-cyclic boundary conditions.

+dots_num_palm in module user, +module netcdf_control in user_init (both in user_interface)

Bugfix: wrong sign removed from the buoyancy production term in the case use_reference = .T. (production_e)

Bugfix: Error message concerning output of particle concentration (pc) modified (check_parameters).

Bugfix: Rayleigh damping for ocean fixed.

Property svn:keywords set to Id

File size: 58.8 KB

Line
1	SUBROUTINE header
2
3	!------------------------------------------------------------------------------!
4	! Actual revisions:
5	! -----------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: header.f90 110 2007-10-05 05:13:14Z raasch $
11	!
12	! 108 2007-08-24 15:10:38Z letzel
13	! Output of informations for coupled model runs (boundary conditions etc.)
14	! + output of momentumfluxes at the top boundary
15	! Rayleigh damping for ocean, e_init
16	!
17	! 97 2007-06-21 08:23:15Z raasch
18	! Adjustments for the ocean version.
19	! use_pt_reference renamed use_reference
20	!
21	! 87 2007-05-22 15:46:47Z raasch
22	! Bugfix: output of use_upstream_for_tke
23	!
24	! 82 2007-04-16 15:40:52Z raasch
25	! Preprocessor strings for different linux clusters changed to "lc",
26	! routine local_flush is used for buffer flushing
27	!
28	! 76 2007-03-29 00:58:32Z raasch
29	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
30	! output of the loop optimization method, moisture renamed humidity,
31	! output of subversion revision number
32	!
33	! 19 2007-02-23 04:53:48Z raasch
34	! Output of scalar flux applied at top boundary
35	!
36	! RCS Log replace by Id keyword, revision history cleaned up
37	!
38	! Revision 1.63 2006/08/22 13:53:13 raasch
39	! Output of dz_max
40	!
41	! Revision 1.1 1997/08/11 06:17:20 raasch
42	! Initial revision
43	!
44	!
45	! Description:
46	! ------------
47	! Writing a header with all important informations about the actual run.
48	! This subroutine is called three times, two times at the beginning
49	! (writing information on files RUN_CONTROL and HEADER) and one time at the
50	! end of the run, then writing additional information about CPU-usage on file
51	! header.
52	!------------------------------------------------------------------------------!
53
54	USE arrays_3d
55	USE control_parameters
56	USE cloud_parameters
57	USE cpulog
58	USE dvrp_variables
59	USE grid_variables
60	USE indices
61	USE model_1d
62	USE particle_attributes
63	USE pegrid
64	USE spectrum
65
66	IMPLICIT NONE
67
68	CHARACTER (LEN=1) :: prec
69	CHARACTER (LEN=2) :: do2d_mode
70	CHARACTER (LEN=5) :: section_chr
71	CHARACTER (LEN=9) :: time_to_string
72	CHARACTER (LEN=10) :: coor_chr, host_chr
73	CHARACTER (LEN=16) :: begin_chr
74	CHARACTER (LEN=21) :: ver_rev
75	CHARACTER (LEN=40) :: output_format
76	CHARACTER (LEN=70) :: char1, char2, coordinates, gradients, dopr_chr, &
77	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
78	run_classification, slices, temperatures, &
79	ugcomponent, vgcomponent
80	CHARACTER (LEN=85) :: roben, runten
81
82	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, i, ihost, io, j, l, ll
83	REAL :: cpuseconds_per_simulated_second
84
85	!
86	!-- Open the output file. At the end of the simulation, output is directed
87	!-- to unit 19.
88	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
89	.NOT. simulated_time_at_begin /= simulated_time ) THEN
90	io = 15 ! header output on file RUN_CONTROL
91	ELSE
92	io = 19 ! header output on file HEADER
93	ENDIF
94	CALL check_open( io )
95
96	!
97	!-- At the end of the run, output file (HEADER) will be rewritten with
98	!-- new informations
99	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
100
101	!
102	!-- Determine kind of model run
103	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
104	run_classification = '3D - restart run'
105	ELSE
106	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
107	run_classification = '3D - run without 1D - prerun'
108	ELSEIF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
109	run_classification = '3D - run with 1D - prerun'
110	ELSE
111	PRINT*,'+++ header: unknown action(s): ',initializing_actions
112	ENDIF
113	ENDIF
114	IF ( ocean ) THEN
115	run_classification = 'ocean - ' // run_classification
116	ELSE
117	run_classification = 'atmosphere - ' // run_classification
118	ENDIF
119
120	!
121	!-- Run-identification, date, time, host
122	host_chr = host(1:10)
123	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
124	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
125	IF ( coupling_mode /= 'uncoupled' ) WRITE ( io, 101 ) coupling_mode
126	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
127	ADJUSTR( host_chr )
128	#if defined( __parallel )
129	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
130	char1 = 'calculated'
131	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
132	host(1:2) == 'lc' ) .AND. &
133	npex == -1 .AND. pdims(2) == 1 ) THEN
134	char1 = 'forced'
135	ELSE
136	char1 = 'predefined'
137	ENDIF
138	IF ( threads_per_task == 1 ) THEN
139	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
140	ELSE
141	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
142	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
143	ENDIF
144	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
145	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
146	npex == -1 .AND. pdims(2) == 1 ) &
147	THEN
148	WRITE ( io, 106 )
149	ELSEIF ( pdims(2) == 1 ) THEN
150	WRITE ( io, 107 ) 'x'
151	ELSEIF ( pdims(1) == 1 ) THEN
152	WRITE ( io, 107 ) 'y'
153	ENDIF
154	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
155	#endif
156	WRITE ( io, 99 )
157
158	!
159	!-- Numerical schemes
160	WRITE ( io, 110 )
161	IF ( psolver(1:7) == 'poisfft' ) THEN
162	WRITE ( io, 111 ) TRIM( fft_method )
163	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
164	ELSEIF ( psolver == 'sor' ) THEN
165	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
166	ELSEIF ( psolver == 'multigrid' ) THEN
167	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
168	IF ( mg_cycles == -1 ) THEN
169	WRITE ( io, 140 ) residual_limit
170	ELSE
171	WRITE ( io, 141 ) mg_cycles
172	ENDIF
173	IF ( mg_switch_to_pe0_level == 0 ) THEN
174	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
175	nzt_mg(1)
176	ELSE
177	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
178	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
179	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
180	nzt_mg(mg_switch_to_pe0_level), &
181	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
182	nzt_mg(1)
183	ENDIF
184	ENDIF
185	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
186	THEN
187	WRITE ( io, 142 )
188	ENDIF
189
190	IF ( momentum_advec == 'pw-scheme' ) THEN
191	WRITE ( io, 113 )
192	ELSE
193	WRITE ( io, 114 )
194	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
195	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
196	overshoot_limit_w /= 0.0 ) THEN
197	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
198	overshoot_limit_w
199	ENDIF
200	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
201	ups_limit_w /= 0.0 ) &
202	THEN
203	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
204	ENDIF
205	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
206	ENDIF
207	IF ( scalar_advec == 'pw-scheme' ) THEN
208	WRITE ( io, 116 )
209	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
210	WRITE ( io, 117 )
211	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
212	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
213	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
214	ENDIF
215	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
216	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
217	ENDIF
218	ELSE
219	WRITE ( io, 118 )
220	ENDIF
221
222	WRITE ( io, 139 ) TRIM( loop_optimization )
223
224	IF ( galilei_transformation ) THEN
225	IF ( use_ug_for_galilei_tr ) THEN
226	char1 = 'geostrophic wind'
227	ELSE
228	char1 = 'mean wind in model domain'
229	ENDIF
230	IF ( simulated_time_at_begin == simulated_time ) THEN
231	char2 = 'at the start of the run'
232	ELSE
233	char2 = 'at the end of the run'
234	ENDIF
235	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
236	advected_distance_x/1000.0, advected_distance_y/1000.0
237	ENDIF
238	IF ( timestep_scheme == 'leapfrog' ) THEN
239	WRITE ( io, 120 )
240	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
241	WRITE ( io, 121 )
242	ELSE
243	WRITE ( io, 122 ) timestep_scheme
244	ENDIF
245	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
246	IF ( rayleigh_damping_factor /= 0.0 ) THEN
247	IF ( .NOT. ocean ) THEN
248	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
249	rayleigh_damping_factor
250	ELSE
251	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
252	rayleigh_damping_factor
253	ENDIF
254	ENDIF
255	IF ( humidity ) THEN
256	IF ( .NOT. cloud_physics ) THEN
257	WRITE ( io, 129 )
258	ELSE
259	WRITE ( io, 130 )
260	WRITE ( io, 131 )
261	IF ( radiation ) WRITE ( io, 132 )
262	IF ( precipitation ) WRITE ( io, 133 )
263	ENDIF
264	ENDIF
265	IF ( passive_scalar ) WRITE ( io, 134 )
266	IF ( conserve_volume_flow ) WRITE ( io, 150 )
267	WRITE ( io, 99 )
268
269	!
270	!-- Runtime and timestep informations
271	WRITE ( io, 200 )
272	IF ( .NOT. dt_fixed ) THEN
273	WRITE ( io, 201 ) dt_max, cfl_factor
274	ELSE
275	WRITE ( io, 202 ) dt
276	ENDIF
277	WRITE ( io, 203 ) simulated_time_at_begin, end_time
278
279	IF ( time_restart /= 9999999.9 .AND. &
280	simulated_time_at_begin == simulated_time ) THEN
281	IF ( dt_restart == 9999999.9 ) THEN
282	WRITE ( io, 204 ) ' Restart at: ',time_restart
283	ELSE
284	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
285	ENDIF
286	ENDIF
287
288	IF ( simulated_time_at_begin /= simulated_time ) THEN
289	i = MAX ( log_point_s(10)%counts, 1 )
290	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
291	cpuseconds_per_simulated_second = 0.0
292	ELSE
293	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
294	( simulated_time - &
295	simulated_time_at_begin )
296	ENDIF
297	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
298	log_point_s(10)%sum / REAL( i ), &
299	cpuseconds_per_simulated_second
300	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
301	IF ( dt_restart == 9999999.9 ) THEN
302	WRITE ( io, 204 ) ' Next restart at: ',time_restart
303	ELSE
304	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
305	ENDIF
306	ENDIF
307	ENDIF
308
309	!
310	!-- Computational grid
311	IF ( .NOT. ocean ) THEN
312	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
313	IF ( dz_stretch_level_index < nzt+1 ) THEN
314	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
315	dz_stretch_factor, dz_max
316	ENDIF
317	ELSE
318	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
319	IF ( dz_stretch_level_index > 0 ) THEN
320	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
321	dz_stretch_factor, dz_max
322	ENDIF
323	ENDIF
324	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
325	MIN( nnz+2, nzt+2 )
326	IF ( numprocs > 1 ) THEN
327	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
328	WRITE ( io, 255 )
329	ELSE
330	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
331	ENDIF
332	ENDIF
333	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
334
335	!
336	!-- Topography
337	WRITE ( io, 270 ) topography
338	SELECT CASE ( TRIM( topography ) )
339
340	CASE ( 'flat' )
341	! no actions necessary
342
343	CASE ( 'single_building' )
344	blx = INT( building_length_x / dx )
345	bly = INT( building_length_y / dy )
346	bh = INT( building_height / dz )
347
348	IF ( building_wall_left == 9999999.9 ) THEN
349	building_wall_left = ( nx + 1 - blx ) / 2 * dx
350	ENDIF
351	bxl = INT ( building_wall_left / dx + 0.5 )
352	bxr = bxl + blx
353
354	IF ( building_wall_south == 9999999.9 ) THEN
355	building_wall_south = ( ny + 1 - bly ) / 2 * dy
356	ENDIF
357	bys = INT ( building_wall_south / dy + 0.5 )
358	byn = bys + bly
359
360	WRITE ( io, 271 ) building_length_x, building_length_y, &
361	building_height, bxl, bxr, bys, byn
362
363	END SELECT
364
365	!
366	!-- Boundary conditions
367	IF ( ibc_p_b == 0 ) THEN
368	runten = 'p(0) = 0 \|'
369	ELSEIF ( ibc_p_b == 1 ) THEN
370	runten = 'p(0) = p(1) \|'
371	ELSE
372	runten = 'p(0) = p(1) +R\|'
373	ENDIF
374	IF ( ibc_p_t == 0 ) THEN
375	roben = 'p(nzt+1) = 0 \|'
376	ELSE
377	roben = 'p(nzt+1) = p(nzt) \|'
378	ENDIF
379
380	IF ( ibc_uv_b == 0 ) THEN
381	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
382	ELSE
383	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
384	ENDIF
385	IF ( ibc_uv_t == 0 ) THEN
386	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
387	ELSE
388	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
389	ENDIF
390
391	IF ( ibc_pt_b == 0 ) THEN
392	runten = TRIM( runten ) // ' pt(0) = pt_surface'
393	ELSEIF ( ibc_pt_b == 1 ) THEN
394	runten = TRIM( runten ) // ' pt(0) = pt(1)'
395	ELSEIF ( ibc_pt_b == 2 ) THEN
396	runten = TRIM( runten ) // ' pt(0) = from coupled model'
397	ENDIF
398	IF ( ibc_pt_t == 0 ) THEN
399	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
400	ELSEIF( ibc_pt_t == 1 ) THEN
401	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
402	ELSEIF( ibc_pt_t == 2 ) THEN
403	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
404	ENDIF
405
406	WRITE ( io, 300 ) runten, roben
407
408	IF ( .NOT. constant_diffusion ) THEN
409	IF ( ibc_e_b == 1 ) THEN
410	runten = 'e(0) = e(1)'
411	ELSE
412	runten = 'e(0) = e(1) = (u/0.1)*2'
413	ENDIF
414	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
415
416	WRITE ( io, 301 ) 'e', runten, roben
417
418	ENDIF
419
420	IF ( ocean ) THEN
421	runten = 'sa(0) = sa(1)'
422	IF ( ibc_sa_t == 0 ) THEN
423	roben = 'sa(nzt+1) = sa_surface'
424	ELSE
425	roben = 'sa(nzt+1) = sa(nzt)'
426	ENDIF
427	WRITE ( io, 301 ) 'sa', runten, roben
428	ENDIF
429
430	IF ( humidity ) THEN
431	IF ( ibc_q_b == 0 ) THEN
432	runten = 'q(0) = q_surface'
433	ELSE
434	runten = 'q(0) = q(1)'
435	ENDIF
436	IF ( ibc_q_t == 0 ) THEN
437	roben = 'q(nzt) = q_top'
438	ELSE
439	roben = 'q(nzt) = q(nzt-1) + dq/dz'
440	ENDIF
441	WRITE ( io, 301 ) 'q', runten, roben
442	ENDIF
443
444	IF ( passive_scalar ) THEN
445	IF ( ibc_q_b == 0 ) THEN
446	runten = 's(0) = s_surface'
447	ELSE
448	runten = 's(0) = s(1)'
449	ENDIF
450	IF ( ibc_q_t == 0 ) THEN
451	roben = 's(nzt) = s_top'
452	ELSE
453	roben = 's(nzt) = s(nzt-1) + ds/dz'
454	ENDIF
455	WRITE ( io, 301 ) 's', runten, roben
456	ENDIF
457
458	IF ( use_surface_fluxes ) THEN
459	WRITE ( io, 303 )
460	IF ( constant_heatflux ) THEN
461	WRITE ( io, 306 ) surface_heatflux
462	IF ( random_heatflux ) WRITE ( io, 307 )
463	ENDIF
464	IF ( humidity .AND. constant_waterflux ) THEN
465	WRITE ( io, 311 ) surface_waterflux
466	ENDIF
467	IF ( passive_scalar .AND. constant_waterflux ) THEN
468	WRITE ( io, 313 ) surface_waterflux
469	ENDIF
470	ENDIF
471
472	IF ( use_top_fluxes ) THEN
473	WRITE ( io, 304 )
474	IF ( coupling_mode == 'uncoupled' ) THEN
475	WRITE ( io, 319 ) top_momentumflux_u, top_momentumflux_v
476	IF ( constant_top_heatflux ) THEN
477	WRITE ( io, 306 ) top_heatflux
478	ENDIF
479	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
480	WRITE ( io, 316 )
481	ENDIF
482	IF ( ocean .AND. constant_top_salinityflux ) THEN
483	WRITE ( io, 309 ) top_salinityflux
484	ENDIF
485	IF ( humidity .OR. passive_scalar ) THEN
486	WRITE ( io, 315 )
487	ENDIF
488	ENDIF
489
490	IF ( prandtl_layer ) THEN
491	WRITE ( io, 305 ) 0.5 * (zu(1)-zu(0)), roughness_length, kappa, &
492	rif_min, rif_max
493	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
494	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
495	WRITE ( io, 312 )
496	ENDIF
497	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
498	WRITE ( io, 314 )
499	ENDIF
500	ELSE
501	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
502	WRITE ( io, 310 ) rif_min, rif_max
503	ENDIF
504	ENDIF
505
506	WRITE ( io, 317 ) bc_lr, bc_ns
507	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
508	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
509	ENDIF
510
511	!
512	!-- Listing of 1D-profiles
513	WRITE ( io, 320 ) dt_dopr_listing
514	IF ( averaging_interval_pr /= 0.0 ) THEN
515	WRITE ( io, 321 ) averaging_interval_pr, dt_averaging_input_pr
516	ENDIF
517
518	!
519	!-- DATA output
520	WRITE ( io, 330 )
521	IF ( averaging_interval_pr /= 0.0 ) THEN
522	WRITE ( io, 321 ) averaging_interval_pr, dt_averaging_input_pr
523	ENDIF
524
525	!
526	!-- 1D-profiles
527	dopr_chr = 'Profile:'
528	IF ( dopr_n /= 0 ) THEN
529	WRITE ( io, 331 )
530
531	output_format = ''
532	IF ( netcdf_output ) THEN
533	IF ( netcdf_64bit ) THEN
534	output_format = 'netcdf (64 bit offset)'
535	ELSE
536	output_format = 'netcdf'
537	ENDIF
538	ENDIF
539	IF ( profil_output ) THEN
540	IF ( netcdf_output ) THEN
541	output_format = TRIM( output_format ) // ' and profil'
542	ELSE
543	output_format = 'profil'
544	ENDIF
545	ENDIF
546	WRITE ( io, 345 ) output_format
547
548	DO i = 1, dopr_n
549	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
550	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
551	WRITE ( io, 332 ) dopr_chr
552	dopr_chr = ' :'
553	ENDIF
554	ENDDO
555
556	IF ( dopr_chr /= '' ) THEN
557	WRITE ( io, 332 ) dopr_chr
558	ENDIF
559	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
560	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
561	ENDIF
562
563	!
564	!-- 2D-arrays
565	DO av = 0, 1
566
567	i = 1
568	do2d_xy = ''
569	do2d_xz = ''
570	do2d_yz = ''
571	DO WHILE ( do2d(av,i) /= ' ' )
572
573	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
574	do2d_mode = do2d(av,i)(l-1:l)
575
576	SELECT CASE ( do2d_mode )
577	CASE ( 'xy' )
578	ll = LEN_TRIM( do2d_xy )
579	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
580	CASE ( 'xz' )
581	ll = LEN_TRIM( do2d_xz )
582	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
583	CASE ( 'yz' )
584	ll = LEN_TRIM( do2d_yz )
585	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
586	END SELECT
587
588	i = i + 1
589
590	ENDDO
591
592	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
593	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
594	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
595	( netcdf_output .OR. iso2d_output ) ) THEN
596
597	IF ( av == 0 ) THEN
598	WRITE ( io, 334 ) ''
599	ELSE
600	WRITE ( io, 334 ) '(time-averaged)'
601	ENDIF
602
603	IF ( do2d_at_begin ) THEN
604	begin_chr = 'and at the start'
605	ELSE
606	begin_chr = ''
607	ENDIF
608
609	output_format = ''
610	IF ( netcdf_output ) THEN
611	IF ( netcdf_64bit ) THEN
612	output_format = 'netcdf (64 bit offset)'
613	ELSE
614	output_format = 'netcdf'
615	ENDIF
616	ENDIF
617	IF ( iso2d_output ) THEN
618	IF ( netcdf_output ) THEN
619	output_format = TRIM( output_format ) // ' and iso2d'
620	ELSE
621	output_format = 'iso2d'
622	ENDIF
623	ENDIF
624	WRITE ( io, 345 ) output_format
625
626	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
627	i = 1
628	slices = '/'
629	coordinates = '/'
630	!
631	!-- Building strings with index and coordinate informations of the
632	!-- slices
633	DO WHILE ( section(i,1) /= -9999 )
634
635	WRITE (section_chr,'(I5)') section(i,1)
636	section_chr = ADJUSTL( section_chr )
637	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
638
639	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
640	coor_chr = ADJUSTL( coor_chr )
641	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
642
643	i = i + 1
644	ENDDO
645	IF ( av == 0 ) THEN
646	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
647	TRIM( begin_chr ), 'k', TRIM( slices ), &
648	TRIM( coordinates )
649	IF ( skip_time_do2d_xy /= 0.0 ) THEN
650	WRITE ( io, 339 ) skip_time_do2d_xy
651	ENDIF
652	ELSE
653	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
654	TRIM( begin_chr ), averaging_interval, &
655	dt_averaging_input, 'k', TRIM( slices ), &
656	TRIM( coordinates )
657	IF ( skip_time_data_output_av /= 0.0 ) THEN
658	WRITE ( io, 339 ) skip_time_data_output_av
659	ENDIF
660	ENDIF
661
662	ENDIF
663
664	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
665	i = 1
666	slices = '/'
667	coordinates = '/'
668	!
669	!-- Building strings with index and coordinate informations of the
670	!-- slices
671	DO WHILE ( section(i,2) /= -9999 )
672
673	WRITE (section_chr,'(I5)') section(i,2)
674	section_chr = ADJUSTL( section_chr )
675	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
676
677	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
678	coor_chr = ADJUSTL( coor_chr )
679	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
680
681	i = i + 1
682	ENDDO
683	IF ( av == 0 ) THEN
684	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
685	TRIM( begin_chr ), 'j', TRIM( slices ), &
686	TRIM( coordinates )
687	IF ( skip_time_do2d_xz /= 0.0 ) THEN
688	WRITE ( io, 339 ) skip_time_do2d_xz
689	ENDIF
690	ELSE
691	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
692	TRIM( begin_chr ), averaging_interval, &
693	dt_averaging_input, 'j', TRIM( slices ), &
694	TRIM( coordinates )
695	IF ( skip_time_data_output_av /= 0.0 ) THEN
696	WRITE ( io, 339 ) skip_time_data_output_av
697	ENDIF
698	ENDIF
699	ENDIF
700
701	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
702	i = 1
703	slices = '/'
704	coordinates = '/'
705	!
706	!-- Building strings with index and coordinate informations of the
707	!-- slices
708	DO WHILE ( section(i,3) /= -9999 )
709
710	WRITE (section_chr,'(I5)') section(i,3)
711	section_chr = ADJUSTL( section_chr )
712	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
713
714	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
715	coor_chr = ADJUSTL( coor_chr )
716	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
717
718	i = i + 1
719	ENDDO
720	IF ( av == 0 ) THEN
721	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
722	TRIM( begin_chr ), 'i', TRIM( slices ), &
723	TRIM( coordinates )
724	IF ( skip_time_do2d_yz /= 0.0 ) THEN
725	WRITE ( io, 339 ) skip_time_do2d_yz
726	ENDIF
727	ELSE
728	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
729	TRIM( begin_chr ), averaging_interval, &
730	dt_averaging_input, 'i', TRIM( slices ), &
731	TRIM( coordinates )
732	IF ( skip_time_data_output_av /= 0.0 ) THEN
733	WRITE ( io, 339 ) skip_time_data_output_av
734	ENDIF
735	ENDIF
736	ENDIF
737
738	ENDIF
739
740	ENDDO
741
742	!
743	!-- 3d-arrays
744	DO av = 0, 1
745
746	i = 1
747	do3d_chr = ''
748	DO WHILE ( do3d(av,i) /= ' ' )
749
750	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
751	i = i + 1
752
753	ENDDO
754
755	IF ( do3d_chr /= '' ) THEN
756	IF ( av == 0 ) THEN
757	WRITE ( io, 336 ) ''
758	ELSE
759	WRITE ( io, 336 ) '(time-averaged)'
760	ENDIF
761
762	output_format = ''
763	IF ( netcdf_output ) THEN
764	IF ( netcdf_64bit .AND. netcdf_64bit_3d ) THEN
765	output_format = 'netcdf (64 bit offset)'
766	ELSE
767	output_format = 'netcdf'
768	ENDIF
769	ENDIF
770	IF ( avs_output ) THEN
771	IF ( netcdf_output ) THEN
772	output_format = TRIM( output_format ) // ' and avs'
773	ELSE
774	output_format = 'avs'
775	ENDIF
776	ENDIF
777	WRITE ( io, 345 ) output_format
778
779	IF ( do3d_at_begin ) THEN
780	begin_chr = 'and at the start'
781	ELSE
782	begin_chr = ''
783	ENDIF
784	IF ( av == 0 ) THEN
785	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
786	zu(nz_do3d), nz_do3d
787	ELSE
788	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
789	TRIM( begin_chr ), averaging_interval, &
790	dt_averaging_input, zu(nz_do3d), nz_do3d
791	ENDIF
792
793	IF ( do3d_compress ) THEN
794	do3d_chr = ''
795	i = 1
796	DO WHILE ( do3d(av,i) /= ' ' )
797
798	SELECT CASE ( do3d(av,i) )
799	CASE ( 'u' )
800	j = 1
801	CASE ( 'v' )
802	j = 2
803	CASE ( 'w' )
804	j = 3
805	CASE ( 'p' )
806	j = 4
807	CASE ( 'pt' )
808	j = 5
809	END SELECT
810	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
811	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
812	':' // prec // ','
813	i = i + 1
814
815	ENDDO
816	WRITE ( io, 338 ) do3d_chr
817
818	ENDIF
819
820	IF ( av == 0 ) THEN
821	IF ( skip_time_do3d /= 0.0 ) THEN
822	WRITE ( io, 339 ) skip_time_do3d
823	ENDIF
824	ELSE
825	IF ( skip_time_data_output_av /= 0.0 ) THEN
826	WRITE ( io, 339 ) skip_time_data_output_av
827	ENDIF
828	ENDIF
829
830	ENDIF
831
832	ENDDO
833
834	!
835	!-- Timeseries
836	IF ( dt_dots /= 9999999.9 ) THEN
837	WRITE ( io, 340 )
838
839	output_format = ''
840	IF ( netcdf_output ) THEN
841	IF ( netcdf_64bit ) THEN
842	output_format = 'netcdf (64 bit offset)'
843	ELSE
844	output_format = 'netcdf'
845	ENDIF
846	ENDIF
847	IF ( profil_output ) THEN
848	IF ( netcdf_output ) THEN
849	output_format = TRIM( output_format ) // ' and profil'
850	ELSE
851	output_format = 'profil'
852	ENDIF
853	ENDIF
854	WRITE ( io, 345 ) output_format
855	WRITE ( io, 341 ) dt_dots
856	ENDIF
857
858	#if defined( __dvrp_graphics )
859	!
860	!-- Dvrp-output
861	IF ( dt_dvrp /= 9999999.9 ) THEN
862	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
863	TRIM( dvrp_username ), TRIM( dvrp_directory )
864	i = 1
865	l = 0
866	DO WHILE ( mode_dvrp(i) /= ' ' )
867	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
868	READ ( mode_dvrp(i), '(10X,I1)' ) j
869	l = l + 1
870	IF ( do3d(0,j) /= ' ' ) THEN
871	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l)
872	ENDIF
873	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
874	READ ( mode_dvrp(i), '(6X,I1)' ) j
875	IF ( do2d(0,j) /= ' ' ) WRITE ( io, 362 ) TRIM( do2d(0,j) )
876	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
877	WRITE ( io, 363 )
878	ENDIF
879	i = i + 1
880	ENDDO
881	ENDIF
882	#endif
883
884	#if defined( __spectra )
885	!
886	!-- Spectra output
887	IF ( dt_dosp /= 9999999.9 ) THEN
888	WRITE ( io, 370 )
889
890	output_format = ''
891	IF ( netcdf_output ) THEN
892	IF ( netcdf_64bit ) THEN
893	output_format = 'netcdf (64 bit offset)'
894	ELSE
895	output_format = 'netcdf'
896	ENDIF
897	ENDIF
898	IF ( profil_output ) THEN
899	IF ( netcdf_output ) THEN
900	output_format = TRIM( output_format ) // ' and profil'
901	ELSE
902	output_format = 'profil'
903	ENDIF
904	ENDIF
905	WRITE ( io, 345 ) output_format
906	WRITE ( io, 371 ) dt_dosp
907	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
908	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
909	( spectra_direction(i), i = 1,10 ), &
910	( comp_spectra_level(i), i = 1,10 ), &
911	( plot_spectra_level(i), i = 1,10 ), &
912	averaging_interval_sp, dt_averaging_input_pr
913	ENDIF
914	#endif
915
916	WRITE ( io, 99 )
917
918	!
919	!-- Physical quantities
920	WRITE ( io, 400 )
921
922	!
923	!-- Geostrophic parameters
924	WRITE ( io, 410 ) omega, phi, f, fs
925
926	!
927	!-- Other quantities
928	WRITE ( io, 411 ) g
929	IF ( use_reference ) THEN
930	IF ( ocean ) THEN
931	WRITE ( io, 412 ) prho_reference
932	ELSE
933	WRITE ( io, 413 ) pt_reference
934	ENDIF
935	ENDIF
936
937	!
938	!-- Cloud physics parameters
939	IF ( cloud_physics ) THEN
940	WRITE ( io, 415 )
941	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
942	ENDIF
943
944	!-- Profile of the geostrophic wind (component ug)
945	!-- Building output strings
946	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
947	gradients = '------'
948	slices = ' 0'
949	coordinates = ' 0.0'
950	i = 1
951	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
952
953	WRITE (coor_chr,'(F6.2,4X)') ug(ug_vertical_gradient_level_ind(i))
954	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
955
956	WRITE (coor_chr,'(F6.2,4X)') ug_vertical_gradient(i)
957	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
958
959	WRITE (coor_chr,'(I6,4X)') ug_vertical_gradient_level_ind(i)
960	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
961
962	WRITE (coor_chr,'(F6.1,4X)') ug_vertical_gradient_level(i)
963	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
964
965	i = i + 1
966	ENDDO
967
968	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
969	TRIM( gradients ), TRIM( slices )
970
971	!-- Profile of the geostrophic wind (component vg)
972	!-- Building output strings
973	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
974	gradients = '------'
975	slices = ' 0'
976	coordinates = ' 0.0'
977	i = 1
978	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
979
980	WRITE (coor_chr,'(F6.2,4X)') vg(vg_vertical_gradient_level_ind(i))
981	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
982
983	WRITE (coor_chr,'(F6.2,4X)') vg_vertical_gradient(i)
984	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
985
986	WRITE (coor_chr,'(I6,4X)') vg_vertical_gradient_level_ind(i)
987	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
988
989	WRITE (coor_chr,'(F6.1,4X)') vg_vertical_gradient_level(i)
990	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
991
992	i = i + 1
993	ENDDO
994
995	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
996	TRIM( gradients ), TRIM( slices )
997
998	!
999	!-- Initial temperature profile
1000	!-- Building output strings, starting with surface temperature
1001	WRITE ( temperatures, '(F6.2)' ) pt_surface
1002	gradients = '------'
1003	slices = ' 0'
1004	coordinates = ' 0.0'
1005	i = 1
1006	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
1007
1008	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
1009	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1010
1011	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
1012	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1013
1014	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
1015	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1016
1017	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
1018	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1019
1020	i = i + 1
1021	ENDDO
1022
1023	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
1024	TRIM( gradients ), TRIM( slices )
1025
1026	!
1027	!-- Initial humidity profile
1028	!-- Building output strings, starting with surface humidity
1029	IF ( humidity .OR. passive_scalar ) THEN
1030	WRITE ( temperatures, '(E8.1)' ) q_surface
1031	gradients = '--------'
1032	slices = ' 0'
1033	coordinates = ' 0.0'
1034	i = 1
1035	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
1036
1037	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
1038	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1039
1040	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
1041	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1042
1043	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
1044	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1045
1046	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
1047	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1048
1049	i = i + 1
1050	ENDDO
1051
1052	IF ( humidity ) THEN
1053	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
1054	TRIM( gradients ), TRIM( slices )
1055	ELSE
1056	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
1057	TRIM( gradients ), TRIM( slices )
1058	ENDIF
1059	ENDIF
1060
1061	!
1062	!-- Initial salinity profile
1063	!-- Building output strings, starting with surface salinity
1064	IF ( ocean ) THEN
1065	WRITE ( temperatures, '(F6.2)' ) sa_surface
1066	gradients = '------'
1067	slices = ' 0'
1068	coordinates = ' 0.0'
1069	i = 1
1070	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
1071
1072	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
1073	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1074
1075	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
1076	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1077
1078	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
1079	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1080
1081	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
1082	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1083
1084	i = i + 1
1085	ENDDO
1086
1087	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
1088	TRIM( gradients ), TRIM( slices )
1089	ENDIF
1090
1091	!
1092	!-- LES / turbulence parameters
1093	WRITE ( io, 450 )
1094
1095	!--
1096	! ... LES-constants used must still be added here
1097	!--
1098	IF ( constant_diffusion ) THEN
1099	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
1100	prandtl_number
1101	ENDIF
1102	IF ( .NOT. constant_diffusion) THEN
1103	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
1104	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
1105	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
1106	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
1107	ENDIF
1108
1109	!
1110	!-- Special actions during the run
1111	WRITE ( io, 470 )
1112	IF ( create_disturbances ) THEN
1113	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
1114	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
1115	zu(disturbance_level_ind_t), disturbance_level_ind_t
1116	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1117	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
1118	ELSE
1119	WRITE ( io, 473 ) disturbance_energy_limit
1120	ENDIF
1121	WRITE ( io, 474 ) TRIM( random_generator )
1122	ENDIF
1123	IF ( pt_surface_initial_change /= 0.0 ) THEN
1124	WRITE ( io, 475 ) pt_surface_initial_change
1125	ENDIF
1126	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
1127	WRITE ( io, 476 ) q_surface_initial_change
1128	ENDIF
1129	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
1130	WRITE ( io, 477 ) q_surface_initial_change
1131	ENDIF
1132
1133	IF ( particle_advection ) THEN
1134	!
1135	!-- Particle attributes
1136	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
1137	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
1138	end_time_prel
1139	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
1140	IF ( random_start_position ) WRITE ( io, 481 )
1141	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
1142	WRITE ( io, 495 ) total_number_of_particles
1143	IF ( .NOT. vertical_particle_advection ) WRITE ( io, 482 )
1144	IF ( maximum_number_of_tailpoints /= 0 ) THEN
1145	WRITE ( io, 483 ) maximum_number_of_tailpoints
1146	IF ( minimum_tailpoint_distance /= 0 ) THEN
1147	WRITE ( io, 484 ) total_number_of_tails, &
1148	minimum_tailpoint_distance, &
1149	maximum_tailpoint_age
1150	ENDIF
1151	ENDIF
1152	IF ( dt_write_particle_data /= 9999999.9 ) THEN
1153	WRITE ( io, 485 ) dt_write_particle_data
1154	output_format = ''
1155	IF ( netcdf_output ) THEN
1156	IF ( netcdf_64bit ) THEN
1157	output_format = 'netcdf (64 bit offset) and binary'
1158	ELSE
1159	output_format = 'netcdf and binary'
1160	ENDIF
1161	ELSE
1162	output_format = 'binary'
1163	ENDIF
1164	WRITE ( io, 345 ) output_format
1165	ENDIF
1166	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
1167	IF ( write_particle_statistics ) WRITE ( io, 486 )
1168
1169	WRITE ( io, 487 ) number_of_particle_groups
1170
1171	DO i = 1, number_of_particle_groups
1172	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
1173	WRITE ( io, 490 ) i, 0.0
1174	WRITE ( io, 492 )
1175	ELSE
1176	WRITE ( io, 490 ) i, radius(i)
1177	IF ( density_ratio(i) /= 0.0 ) THEN
1178	WRITE ( io, 491 ) density_ratio(i)
1179	ELSE
1180	WRITE ( io, 492 )
1181	ENDIF
1182	ENDIF
1183	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
1184	pdx(i), pdy(i), pdz(i)
1185	ENDDO
1186
1187	ENDIF
1188
1189
1190	!
1191	!-- Parameters of 1D-model
1192	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1193	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
1194	mixing_length_1d, dissipation_1d
1195	IF ( damp_level_ind_1d /= nzt+1 ) THEN
1196	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
1197	ENDIF
1198	ENDIF
1199
1200	!
1201	!-- User-defined informations
1202	CALL user_header( io )
1203
1204	WRITE ( io, 99 )
1205
1206	!
1207	!-- Write buffer contents to disc immediately
1208	CALL local_flush( io )
1209
1210	!
1211	!-- Here the FORMATs start
1212
1213	99 FORMAT (1X,78('-'))
1214	100 FORMAT (/1X,'*************************',11X,42('-')/ &
1215	1X,'* ',A,' *',11X,A/ &
1216	1X,'*************************',11X,42('-'))
1217	101 FORMAT (37X,'coupled run: ',A/ &
1218	37X,42('-'))
1219	102 FORMAT (/' Date: ',A8,11X,'Run: ',A20/ &
1220	' Time: ',A8,11X,'Run-No.: ',I2.2/ &
1221	' Run on host: ',A10)
1222	#if defined( __parallel )
1223	103 FORMAT (' Number of PEs:',7X,I4,11X,'Processor grid (x,y): (',I3,',',I3, &
1224	')',1X,A)
1225	104 FORMAT (' Number of PEs:',7X,I4,11X,'Tasks:',I4,' threads per task:',I4/ &
1226	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
1227	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
1228	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
1229	37X,'because the job is running on an SMP-cluster')
1230	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
1231	#endif
1232	110 FORMAT (/' Numerical Schemes:'/ &
1233	' -----------------'/)
1234	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
1235	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
1236	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
1237	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
1238	' or Upstream')
1239	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
1240	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
1241	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
1242	' or Upstream')
1243	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
1244	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
1245	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
1246	' Translation velocity = ',A/ &
1247	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
1248	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
1249	' of timestep changes)')
1250	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
1251	' timestep changes')
1252	122 FORMAT (' --> Time differencing scheme: ',A)
1253	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
1254	' maximum damping coefficient: ',F5.3, ' 1/s')
1255	124 FORMAT (' Spline-overshoots are being suppressed')
1256	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1257	' of'/ &
1258	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1259	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1260	' of'/ &
1261	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1262	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1263	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1264	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1265	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1266	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
1267	130 FORMAT (' --> Additional prognostic equation for the total water content')
1268	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
1269	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
1270	' effective emissivity scheme')
1271	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
1272	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
1273	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
1274	A,'-cycle)'/ &
1275	' number of grid levels: ',I2/ &
1276	' Gauss-Seidel red/black iterations: ',I2)
1277	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1278	I3,')')
1279	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
1280	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1281	I3,')'/ &
1282	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
1283	I3,')')
1284	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
1285	139 FORMAT (' --> Loop optimization method: ',A)
1286	140 FORMAT (' maximum residual allowed: ',E10.3)
1287	141 FORMAT (' fixed number of multigrid cycles: ',I4)
1288	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
1289	'step')
1290	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
1291	'kinetic energy')
1292	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
1293	'conserved')
1294	200 FORMAT (//' Run time and time step information:'/ &
1295	' ----------------------------------'/)
1296	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
1297	' CFL-factor: ',F4.2)
1298	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
1299	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
1300	' End time: ',F9.3,' s')
1301	204 FORMAT ( A,F9.3,' s')
1302	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
1303	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
1304	' CPU-time used: ',F9.3,' s per timestep: ', &
1305	' ',F9.3,' s'/ &
1306	' per second of simulated tim', &
1307	'e: ',F9.3,' s')
1308	250 FORMAT (//' Computational grid and domain size:'/ &
1309	' ----------------------------------'// &
1310	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
1311	' m dz = ',F7.3,' m'/ &
1312	' Domain size: x = ',F10.3,' m y = ',F10.3, &
1313	' m z(u) = ',F10.3,' m'/)
1314	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
1315	' factor: ',F5.3/ &
1316	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
1317	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
1318	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
1319	255 FORMAT (' Subdomains have equal size')
1320	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
1321	'have smaller sizes'/ &
1322	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
1323	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
1324	' degrees')
1325	270 FORMAT (//' Topography informations:'/ &
1326	' -----------------------'// &
1327	1X,'Topography: ',A)
1328	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
1329	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
1330	' / ',I4)
1331	300 FORMAT (//' Boundary conditions:'/ &
1332	' -------------------'// &
1333	' p uv ', &
1334	' pt'// &
1335	' B. bound.: ',A/ &
1336	' T. bound.: ',A)
1337	301 FORMAT (/' ',A// &
1338	' B. bound.: ',A/ &
1339	' T. bound.: ',A)
1340	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
1341	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
1342	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
1343	'computational u,v-level:'// &
1344	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
1345	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1346	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
1347	307 FORMAT (' Heatflux has a random normal distribution')
1348	308 FORMAT (' Predefined surface temperature')
1349	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
1350	310 FORMAT (//' 1D-Model:'// &
1351	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1352	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
1353	312 FORMAT (' Predefined surface humidity')
1354	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
1355	314 FORMAT (' Predefined scalar value at the surface')
1356	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
1357	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
1358	'atmosphere model')
1359	317 FORMAT (//' Lateral boundaries:'/ &
1360	' left/right: ',A/ &
1361	' north/south: ',A)
1362	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
1363	'max =',F5.1,' m**2/s')
1364	319 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
1365	' v: ',F9.6,' m2/s2')
1366	320 FORMAT (//' List output:'/ &
1367	' -----------'// &
1368	' 1D-Profiles:'/ &
1369	' Output every ',F8.2,' s')
1370	321 FORMAT (' Time averaged over ',F8.2,' s'/ &
1371	' Averaging input every ',F8.2,' s')
1372	330 FORMAT (//' Data output:'/ &
1373	' -----------'/)
1374	331 FORMAT (/' 1D-Profiles:')
1375	332 FORMAT (/' ',A)
1376	333 FORMAT (' Output every ',F8.2,' s',/ &
1377	' Time averaged over ',F8.2,' s'/ &
1378	' Averaging input every ',F8.2,' s')
1379	334 FORMAT (/' 2D-Arrays',A,':')
1380	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1381	' Output every ',F8.2,' s ',A/ &
1382	' Cross sections at ',A1,' = ',A/ &
1383	' scalar-coordinates: ',A,' m'/)
1384	336 FORMAT (/' 3D-Arrays',A,':')
1385	337 FORMAT (/' Arrays: ',A/ &
1386	' Output every ',F8.2,' s ',A/ &
1387	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1388	338 FORMAT (' Compressed data output'/ &
1389	' Decimal precision: ',A/)
1390	339 FORMAT (' No output during initial ',F8.2,' s')
1391	340 FORMAT (/' Time series:')
1392	341 FORMAT (' Output every ',F8.2,' s'/)
1393	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1394	' Output every ',F8.2,' s ',A/ &
1395	' Time averaged over ',F8.2,' s'/ &
1396	' Averaging input every ',F8.2,' s'/ &
1397	' Cross sections at ',A1,' = ',A/ &
1398	' scalar-coordinates: ',A,' m'/)
1399	343 FORMAT (/' Arrays: ',A/ &
1400	' Output every ',F8.2,' s ',A/ &
1401	' Time averaged over ',F8.2,' s'/ &
1402	' Averaging input every ',F8.2,' s'/ &
1403	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1404	345 FORMAT (' Output format: ',A/)
1405	#if defined( __dvrp_graphics )
1406	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
1407	' Output every ',F7.1,' s'/ &
1408	' Output mode: ',A/ &
1409	' Host / User: ',A,' / ',A/ &
1410	' Directory: ',A// &
1411	' The sequence contains:')
1412	361 FORMAT (' Isosurface of ',A,' Threshold value: ', E12.3)
1413	362 FORMAT (' Sectional plane ',A)
1414	363 FORMAT (' Particles')
1415	#endif
1416	#if defined( __spectra )
1417	370 FORMAT (' Spectra:')
1418	371 FORMAT (' Output every ',F7.1,' s'/)
1419	372 FORMAT (' Arrays: ', 10(A5,',')/ &
1420	' Directions: ', 10(A5,',')/ &
1421	' height levels k = ', 9(I3,','),I3,'.'/ &
1422	' height levels selected for standard plot:'/ &
1423	' k = ', 9(I3,','),I3,'.'/ &
1424	' Time averaged over ', F7.1, ' s,' / &
1425	' Profiles for the time averaging are taken every ', &
1426	F6.1,' s')
1427	#endif
1428	400 FORMAT (//' Physical quantities:'/ &
1429	' -------------------'/)
1430	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
1431	' Geograph. latitude : phi = ',F4.1,' degr'/ &
1432	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
1433	' f* = ',F9.6,' 1/s')
1434	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
1435	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
1436	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
1437	415 FORMAT (/' Cloud physics parameters:'/ &
1438	' ------------------------'/)
1439	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
1440	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
1441	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
1442	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
1443	' Vapourization heat : L_v = ',E8.2,' J/kg')
1444	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
1445	' Height: ',A,' m'/ &
1446	' Temperature: ',A,' K'/ &
1447	' Gradient: ',A,' K/100m'/ &
1448	' Gridpoint: ',A)
1449	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
1450	' Height: ',A,' m'/ &
1451	' Humidity: ',A,' kg/kg'/ &
1452	' Gradient: ',A,' (kg/kg)/100m'/ &
1453	' Gridpoint: ',A)
1454	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
1455	' Height: ',A,' m'/ &
1456	' Scalar concentration: ',A,' kg/m**3'/ &
1457	' Gradient: ',A,' (kg/m**3)/100m'/ &
1458	' Gridpoint: ',A)
1459	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
1460	' Height: ',A,' m'/ &
1461	' ug: ',A,' m/s'/ &
1462	' Gradient: ',A,' 1/100s'/ &
1463	' Gridpoint: ',A)
1464	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
1465	' Height: ',A,' m'/ &
1466	' vg: ',A,' m/s'/ &
1467	' Gradient: ',A,' 1/100s'/ &
1468	' Gridpoint: ',A)
1469	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
1470	' Height: ',A,' m'/ &
1471	' Salinity: ',A,' psu'/ &
1472	' Gradient: ',A,' psu/100m'/ &
1473	' Gridpoint: ',A)
1474	450 FORMAT (//' LES / Turbulence quantities:'/ &
1475	' ---------------------------'/)
1476	451 FORMAT (' Diffusion coefficients are constant:'/ &
1477	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
1478	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
1479	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
1480	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
1481	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
1482	470 FORMAT (//' Actions during the simulation:'/ &
1483	' -----------------------------'/)
1484	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
1485	' Disturbance amplitude : ',F4.2, ' m/s'/ &
1486	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
1487	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
1488	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
1489	' to i/j =',I4)
1490	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
1491	1X,F5.3, ' m2/s2')
1492	474 FORMAT (' Random number generator used : ',A/)
1493	475 FORMAT (' The surface temperature is increased (or decreased, ', &
1494	'respectively, if'/ &
1495	' the value is negative) by ',F5.2,' K at the beginning of the',&
1496	' 3D-simulation'/)
1497	476 FORMAT (' The surface humidity is increased (or decreased, ',&
1498	'respectively, if the'/ &
1499	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
1500	' the 3D-simulation'/)
1501	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
1502	'respectively, if the'/ &
1503	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
1504	' the 3D-simulation'/)
1505	480 FORMAT (' Particles:'/ &
1506	' ---------'// &
1507	' Particle advection is active (switched on at t = ', F7.1, &
1508	' s)'/ &
1509	' Start of new particle generations every ',F6.1,' s'/ &
1510	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
1511	' bottom: ', A, ' top: ', A/&
1512	' Maximum particle age: ',F9.1,' s'/ &
1513	' Advection stopped at t = ',F9.1,' s'/)
1514	481 FORMAT (' Particles have random start positions'/)
1515	482 FORMAT (' Particles are advected only horizontally'/)
1516	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
1517	484 FORMAT (' Number of tails of the total domain: ',I10/ &
1518	' Minimum distance between tailpoints: ',F8.2,' m'/ &
1519	' Maximum age of the end of the tail: ',F8.2,' s')
1520	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
1521	486 FORMAT (' Particle statistics are written on file'/)
1522	487 FORMAT (' Number of particle groups: ',I2/)
1523	488 FORMAT (' SGS velocity components are used for particle advection'/ &
1524	' minimum timestep for advection: ', F7.5/)
1525	489 FORMAT (' Number of particles simultaneously released at each ', &
1526	'point: ', I5/)
1527	490 FORMAT (' Particle group ',I2,':'/ &
1528	' Particle radius: ',E10.3, 'm')
1529	491 FORMAT (' Particle inertia is activated'/ &
1530	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
1531	492 FORMAT (' Particles are advected only passively (no inertia)'/)
1532	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
1533	' y:',F8.1,' - ',F8.1,' m'/&
1534	' z:',F8.1,' - ',F8.1,' m'/&
1535	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
1536	' m dz = ',F8.1,' m'/)
1537	494 FORMAT (' Output of particle time series in NetCDF format every ', &
1538	F8.2,' s'/)
1539	495 FORMAT (' Number of particles in total domain: ',I10/)
1540	500 FORMAT (//' 1D-Model parameters:'/ &
1541	' -------------------'// &
1542	' Simulation time: ',F8.1,' s'/ &
1543	' Run-controll output every: ',F8.1,' s'/ &
1544	' Vertical profile output every: ',F8.1,' s'/ &
1545	' Mixing length calculation: ',A/ &
1546	' Dissipation calculation: ',A/)
1547	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
1548
1549
1550	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 113

Download in other formats: