Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 1114

Last change on this file since 1114 was 1112, checked in by raasch, 11 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 77.1 KB

Line
1	SUBROUTINE header
2
3	!--------------------------------------------------------------------------------!
4	! This file is part of PALM.
5	!
6	! PALM is free software: you can redistribute it and/or modify it under the terms
7	! of the GNU General Public License as published by the Free Software Foundation,
8	! either version 3 of the License, or (at your option) any later version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2012 Leibniz University Hannover
18	!--------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: header.f90 1112 2013-03-09 00:34:37Z raasch $
27	!
28	! 1111 2013-03-08 23:54:10Z raasch
29	! output of accelerator board information
30	! ibc_p_b = 2 removed
31	!
32	! 1108 2013-03-05 07:03:32Z raasch
33	! bugfix for r1106
34	!
35	! 1106 2013-03-04 05:31:38Z raasch
36	! some format changes for coupled runs
37	!
38	! 1092 2013-02-02 11:24:22Z raasch
39	! unused variables removed
40	!
41	! 1036 2012-10-22 13:43:42Z raasch
42	! code put under GPL (PALM 3.9)
43	!
44	! 1031 2012-10-19 14:35:30Z raasch
45	! output of netCDF data format modified
46	!
47	! 1015 2012-09-27 09:23:24Z raasch
48	! output of Aajustment of mixing length to the Prandtl mixing length at first
49	! grid point above ground removed
50	!
51	! 1003 2012-09-14 14:35:53Z raasch
52	! output of information about equal/unequal subdomain size removed
53	!
54	! 1001 2012-09-13 14:08:46Z raasch
55	! all actions concerning leapfrog- and upstream-spline-scheme removed
56	!
57	! 978 2012-08-09 08:28:32Z fricke
58	! -km_damp_max, outflow_damping_width
59	! +pt_damping_factor, pt_damping_width
60	! +z0h
61	!
62	! 964 2012-07-26 09:14:24Z raasch
63	! output of profil-related quantities removed
64	!
65	! 940 2012-07-09 14:31:00Z raasch
66	! Output in case of simulations for pure neutral stratification (no pt-equation
67	! solved)
68	!
69	! 927 2012-06-06 19:15:04Z raasch
70	! output of masking_method for mg-solver
71	!
72	! 868 2012-03-28 12:21:07Z raasch
73	! translation velocity in Galilean transformation changed to 0.6 * ug
74	!
75	! 833 2012-02-22 08:55:55Z maronga
76	! Adjusted format for leaf area density
77	!
78	! 828 2012-02-21 12:00:36Z raasch
79	! output of dissipation_classes + radius_classes
80	!
81	! 825 2012-02-19 03:03:44Z raasch
82	! Output of cloud physics parameters/quantities complemented and restructured
83	!
84	! 767 2011-10-14 06:39:12Z raasch
85	! Output of given initial u,v-profiles
86	!
87	! 759 2011-09-15 13:58:31Z raasch
88	! output of maximum number of parallel io streams
89	!
90	! 707 2011-03-29 11:39:40Z raasch
91	! bc_lr/ns replaced by bc_lr/ns_cyc
92	!
93	! 667 2010-12-23 12:06:00Z suehring/gryschka
94	! Output of advection scheme.
95	! Modified output of Prandtl-layer height.
96	!
97	! 580 2010-10-05 13:59:11Z heinze
98	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
99	! ws_vertical_gradient_level to subs_vertical_gradient_level and
100	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
101	!
102	! 493 2010-03-01 08:30:24Z raasch
103	! NetCDF data output format extendend for NetCDF4/HDF5
104	!
105	! 449 2010-02-02 11:23:59Z raasch
106	! +large scale vertical motion (subsidence/ascent)
107	! Bugfix: index problem concerning gradient_level indices removed
108	!
109	! 410 2009-12-04 17:05:40Z letzel
110	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
111	! mask_scale\|_x\|y\|z, masks, skip_time_domask
112	!
113	! 346 2009-07-06 10:13:41Z raasch
114	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
115	! Coupling with independent precursor runs.
116	! Output of messages replaced by message handling routine.
117	! Output of several additional dvr parameters
118	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
119	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
120	! dp_smooth, dpdxy, u_bulk, v_bulk
121	! topography_grid_convention moved from user_header
122	! small bugfix concerning 3d 64bit netcdf output format
123	!
124	! 206 2008-10-13 14:59:11Z raasch
125	! Bugfix: error in zu index in case of section_xy = -1
126	!
127	! 198 2008-09-17 08:55:28Z raasch
128	! Format adjustments allowing output of larger revision numbers
129	!
130	! 197 2008-09-16 15:29:03Z raasch
131	! allow 100 spectra levels instead of 10 for consistency with
132	! define_netcdf_header,
133	! bugfix in the output of the characteristic levels of potential temperature,
134	! geostrophic wind, scalar concentration, humidity and leaf area density,
135	! output of turbulence recycling informations
136	!
137	! 138 2007-11-28 10:03:58Z letzel
138	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
139	! Allow two instead of one digit to specify isosurface and slicer variables.
140	! Output of sorting frequency of particles
141	!
142	! 108 2007-08-24 15:10:38Z letzel
143	! Output of informations for coupled model runs (boundary conditions etc.)
144	! + output of momentumfluxes at the top boundary
145	! Rayleigh damping for ocean, e_init
146	!
147	! 97 2007-06-21 08:23:15Z raasch
148	! Adjustments for the ocean version.
149	! use_pt_reference renamed use_reference
150	!
151	! 87 2007-05-22 15:46:47Z raasch
152	! Bugfix: output of use_upstream_for_tke
153	!
154	! 82 2007-04-16 15:40:52Z raasch
155	! Preprocessor strings for different linux clusters changed to "lc",
156	! routine local_flush is used for buffer flushing
157	!
158	! 76 2007-03-29 00:58:32Z raasch
159	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
160	! output of the loop optimization method, moisture renamed humidity,
161	! output of subversion revision number
162	!
163	! 19 2007-02-23 04:53:48Z raasch
164	! Output of scalar flux applied at top boundary
165	!
166	! RCS Log replace by Id keyword, revision history cleaned up
167	!
168	! Revision 1.63 2006/08/22 13:53:13 raasch
169	! Output of dz_max
170	!
171	! Revision 1.1 1997/08/11 06:17:20 raasch
172	! Initial revision
173	!
174	!
175	! Description:
176	! ------------
177	! Writing a header with all important informations about the actual run.
178	! This subroutine is called three times, two times at the beginning
179	! (writing information on files RUN_CONTROL and HEADER) and one time at the
180	! end of the run, then writing additional information about CPU-usage on file
181	! header.
182	!-----------------------------------------------------------------------------!
183
184	USE arrays_3d
185	USE control_parameters
186	USE cloud_parameters
187	USE cpulog
188	USE dvrp_variables
189	USE grid_variables
190	USE indices
191	USE model_1d
192	USE particle_attributes
193	USE pegrid
194	USE subsidence_mod
195	USE spectrum
196
197	IMPLICIT NONE
198
199	CHARACTER (LEN=1) :: prec
200	CHARACTER (LEN=2) :: do2d_mode
201	CHARACTER (LEN=5) :: section_chr
202	CHARACTER (LEN=10) :: coor_chr, host_chr
203	CHARACTER (LEN=16) :: begin_chr
204	CHARACTER (LEN=26) :: ver_rev
205	CHARACTER (LEN=40) :: output_format
206	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
207	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
208	domask_chr, run_classification
209	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
210	temperatures, ugcomponent, vgcomponent
211	CHARACTER (LEN=85) :: roben, runten
212
213	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
214
215	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
216	cxl, cxr, cyn, cys, dim, i, io, j, l, ll, mpi_type
217	REAL :: cpuseconds_per_simulated_second
218
219	!
220	!-- Open the output file. At the end of the simulation, output is directed
221	!-- to unit 19.
222	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
223	.NOT. simulated_time_at_begin /= simulated_time ) THEN
224	io = 15 ! header output on file RUN_CONTROL
225	ELSE
226	io = 19 ! header output on file HEADER
227	ENDIF
228	CALL check_open( io )
229
230	!
231	!-- At the end of the run, output file (HEADER) will be rewritten with
232	!-- new informations
233	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
234
235	!
236	!-- Determine kind of model run
237	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
238	run_classification = '3D - restart run'
239	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
240	run_classification = '3D - run with cyclic fill of 3D - prerun data'
241	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
242	run_classification = '3D - run without 1D - prerun'
243	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
244	run_classification = '3D - run with 1D - prerun'
245	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
246	run_classification = '3D - run initialized by user'
247	ELSE
248	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
249	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
250	ENDIF
251	IF ( ocean ) THEN
252	run_classification = 'ocean - ' // run_classification
253	ELSE
254	run_classification = 'atmosphere - ' // run_classification
255	ENDIF
256
257	!
258	!-- Run-identification, date, time, host
259	host_chr = host(1:10)
260	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
261	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
262	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
263	#if defined( __mpi2 )
264	mpi_type = 2
265	#else
266	mpi_type = 1
267	#endif
268	WRITE ( io, 101 ) mpi_type, coupling_mode
269	ENDIF
270	#if defined( __parallel )
271	IF ( coupling_start_time /= 0.0 ) THEN
272	IF ( coupling_start_time > simulated_time_at_begin ) THEN
273	WRITE ( io, 109 )
274	ELSE
275	WRITE ( io, 114 )
276	ENDIF
277	ENDIF
278	#endif
279	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
280	ADJUSTR( host_chr )
281	#if defined( __parallel )
282	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
283	char1 = 'calculated'
284	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
285	host(1:2) == 'lc' ) .AND. &
286	npex == -1 .AND. pdims(2) == 1 ) THEN
287	char1 = 'forced'
288	ELSE
289	char1 = 'predefined'
290	ENDIF
291	IF ( threads_per_task == 1 ) THEN
292	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
293	ELSE
294	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
295	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
296	ENDIF
297	IF ( num_acc_per_node /= 0 ) WRITE ( io, 117 ) num_acc_per_node
298	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
299	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
300	npex == -1 .AND. pdims(2) == 1 ) &
301	THEN
302	WRITE ( io, 106 )
303	ELSEIF ( pdims(2) == 1 ) THEN
304	WRITE ( io, 107 ) 'x'
305	ELSEIF ( pdims(1) == 1 ) THEN
306	WRITE ( io, 107 ) 'y'
307	ENDIF
308	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
309	IF ( numprocs /= maximum_parallel_io_streams ) THEN
310	WRITE ( io, 108 ) maximum_parallel_io_streams
311	ENDIF
312	#else
313	IF ( num_acc_per_node /= 0 ) WRITE ( io, 120 ) num_acc_per_node
314	#endif
315	WRITE ( io, 99 )
316
317	!
318	!-- Numerical schemes
319	WRITE ( io, 110 )
320	IF ( psolver(1:7) == 'poisfft' ) THEN
321	WRITE ( io, 111 ) TRIM( fft_method )
322	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
323	ELSEIF ( psolver == 'sor' ) THEN
324	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
325	ELSEIF ( psolver == 'multigrid' ) THEN
326	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
327	IF ( mg_cycles == -1 ) THEN
328	WRITE ( io, 140 ) residual_limit
329	ELSE
330	WRITE ( io, 141 ) mg_cycles
331	ENDIF
332	IF ( mg_switch_to_pe0_level == 0 ) THEN
333	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
334	nzt_mg(1)
335	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
336	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
337	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
338	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
339	nzt_mg(mg_switch_to_pe0_level), &
340	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
341	nzt_mg(1)
342	ENDIF
343	IF ( masking_method ) WRITE ( io, 144 )
344	ENDIF
345	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
346	THEN
347	WRITE ( io, 142 )
348	ENDIF
349
350	IF ( momentum_advec == 'pw-scheme' ) THEN
351	WRITE ( io, 113 )
352	ELSEIF (momentum_advec == 'ws-scheme' ) THEN
353	WRITE ( io, 503 )
354	ENDIF
355	IF ( scalar_advec == 'pw-scheme' ) THEN
356	WRITE ( io, 116 )
357	ELSEIF ( scalar_advec == 'ws-scheme' ) THEN
358	WRITE ( io, 504 )
359	ELSE
360	WRITE ( io, 118 )
361	ENDIF
362
363	WRITE ( io, 139 ) TRIM( loop_optimization )
364
365	IF ( galilei_transformation ) THEN
366	IF ( use_ug_for_galilei_tr ) THEN
367	char1 = '0.6 * geostrophic wind'
368	ELSE
369	char1 = 'mean wind in model domain'
370	ENDIF
371	IF ( simulated_time_at_begin == simulated_time ) THEN
372	char2 = 'at the start of the run'
373	ELSE
374	char2 = 'at the end of the run'
375	ENDIF
376	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
377	advected_distance_x/1000.0, advected_distance_y/1000.0
378	ENDIF
379	WRITE ( io, 122 ) timestep_scheme
380	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
381	IF ( rayleigh_damping_factor /= 0.0 ) THEN
382	IF ( .NOT. ocean ) THEN
383	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
384	rayleigh_damping_factor
385	ELSE
386	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
387	rayleigh_damping_factor
388	ENDIF
389	ENDIF
390	IF ( neutral ) WRITE ( io, 131 ) pt_surface
391	IF ( humidity ) THEN
392	IF ( .NOT. cloud_physics ) THEN
393	WRITE ( io, 129 )
394	ELSE
395	WRITE ( io, 130 )
396	ENDIF
397	ENDIF
398	IF ( passive_scalar ) WRITE ( io, 134 )
399	IF ( conserve_volume_flow ) THEN
400	WRITE ( io, 150 ) conserve_volume_flow_mode
401	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
402	WRITE ( io, 151 ) u_bulk, v_bulk
403	ENDIF
404	ELSEIF ( dp_external ) THEN
405	IF ( dp_smooth ) THEN
406	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
407	ELSE
408	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
409	ENDIF
410	ENDIF
411	IF ( large_scale_subsidence ) THEN
412	WRITE ( io, 153 )
413	WRITE ( io, 154 )
414	ENDIF
415	WRITE ( io, 99 )
416
417	!
418	!-- Runtime and timestep informations
419	WRITE ( io, 200 )
420	IF ( .NOT. dt_fixed ) THEN
421	WRITE ( io, 201 ) dt_max, cfl_factor
422	ELSE
423	WRITE ( io, 202 ) dt
424	ENDIF
425	WRITE ( io, 203 ) simulated_time_at_begin, end_time
426
427	IF ( time_restart /= 9999999.9 .AND. &
428	simulated_time_at_begin == simulated_time ) THEN
429	IF ( dt_restart == 9999999.9 ) THEN
430	WRITE ( io, 204 ) ' Restart at: ',time_restart
431	ELSE
432	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
433	ENDIF
434	ENDIF
435
436	IF ( simulated_time_at_begin /= simulated_time ) THEN
437	i = MAX ( log_point_s(10)%counts, 1 )
438	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
439	cpuseconds_per_simulated_second = 0.0
440	ELSE
441	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
442	( simulated_time - &
443	simulated_time_at_begin )
444	ENDIF
445	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
446	log_point_s(10)%sum / REAL( i ), &
447	cpuseconds_per_simulated_second
448	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
449	IF ( dt_restart == 9999999.9 ) THEN
450	WRITE ( io, 204 ) ' Next restart at: ',time_restart
451	ELSE
452	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
453	ENDIF
454	ENDIF
455	ENDIF
456
457	!
458	!-- Start time for coupled runs, if independent precursor runs for atmosphere
459	!-- and ocean are used or have been used. In this case, coupling_start_time
460	!-- defines the time when the coupling is switched on.
461	IF ( coupling_start_time /= 0.0 ) THEN
462	WRITE ( io, 207 ) coupling_start_time
463	ENDIF
464
465	!
466	!-- Computational grid
467	IF ( .NOT. ocean ) THEN
468	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
469	IF ( dz_stretch_level_index < nzt+1 ) THEN
470	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
471	dz_stretch_factor, dz_max
472	ENDIF
473	ELSE
474	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
475	IF ( dz_stretch_level_index > 0 ) THEN
476	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
477	dz_stretch_factor, dz_max
478	ENDIF
479	ENDIF
480	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
481	MIN( nnz+2, nzt+2 )
482	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
483
484	!
485	!-- Topography
486	WRITE ( io, 270 ) topography
487	SELECT CASE ( TRIM( topography ) )
488
489	CASE ( 'flat' )
490	! no actions necessary
491
492	CASE ( 'single_building' )
493	blx = INT( building_length_x / dx )
494	bly = INT( building_length_y / dy )
495	bh = INT( building_height / dz )
496
497	IF ( building_wall_left == 9999999.9 ) THEN
498	building_wall_left = ( nx + 1 - blx ) / 2 * dx
499	ENDIF
500	bxl = INT ( building_wall_left / dx + 0.5 )
501	bxr = bxl + blx
502
503	IF ( building_wall_south == 9999999.9 ) THEN
504	building_wall_south = ( ny + 1 - bly ) / 2 * dy
505	ENDIF
506	bys = INT ( building_wall_south / dy + 0.5 )
507	byn = bys + bly
508
509	WRITE ( io, 271 ) building_length_x, building_length_y, &
510	building_height, bxl, bxr, bys, byn
511
512	CASE ( 'single_street_canyon' )
513	ch = NINT( canyon_height / dz )
514	IF ( canyon_width_x /= 9999999.9 ) THEN
515	!
516	!-- Street canyon in y direction
517	cwx = NINT( canyon_width_x / dx )
518	IF ( canyon_wall_left == 9999999.9 ) THEN
519	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
520	ENDIF
521	cxl = NINT( canyon_wall_left / dx )
522	cxr = cxl + cwx
523	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
524
525	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
526	!
527	!-- Street canyon in x direction
528	cwy = NINT( canyon_width_y / dy )
529	IF ( canyon_wall_south == 9999999.9 ) THEN
530	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
531	ENDIF
532	cys = NINT( canyon_wall_south / dy )
533	cyn = cys + cwy
534	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
535	ENDIF
536
537	END SELECT
538
539	IF ( TRIM( topography ) /= 'flat' ) THEN
540	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
541	IF ( TRIM( topography ) == 'single_building' .OR. &
542	TRIM( topography ) == 'single_street_canyon' ) THEN
543	WRITE ( io, 278 )
544	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
545	WRITE ( io, 279 )
546	ENDIF
547	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
548	WRITE ( io, 278 )
549	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
550	WRITE ( io, 279 )
551	ENDIF
552	ENDIF
553
554	IF ( plant_canopy ) THEN
555
556	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
557	IF ( passive_scalar ) THEN
558	WRITE ( io, 281 ) scalar_exchange_coefficient, &
559	leaf_surface_concentration
560	ENDIF
561
562	!
563	!-- Heat flux at the top of vegetation
564	WRITE ( io, 282 ) cthf
565
566	!
567	!-- Leaf area density profile
568	!-- Building output strings, starting with surface value
569	WRITE ( learde, '(F6.4)' ) lad_surface
570	gradients = '------'
571	slices = ' 0'
572	coordinates = ' 0.0'
573	i = 1
574	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
575
576	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
577	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
578
579	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
580	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
581
582	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
583	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
584
585	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
586	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
587
588	i = i + 1
589	ENDDO
590
591	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
592	TRIM( gradients ), TRIM( slices )
593
594	ENDIF
595
596	!
597	!-- Boundary conditions
598	IF ( ibc_p_b == 0 ) THEN
599	runten = 'p(0) = 0 \|'
600	ELSEIF ( ibc_p_b == 1 ) THEN
601	runten = 'p(0) = p(1) \|'
602	ENDIF
603	IF ( ibc_p_t == 0 ) THEN
604	roben = 'p(nzt+1) = 0 \|'
605	ELSE
606	roben = 'p(nzt+1) = p(nzt) \|'
607	ENDIF
608
609	IF ( ibc_uv_b == 0 ) THEN
610	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
611	ELSE
612	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
613	ENDIF
614	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
615	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
616	ELSEIF ( ibc_uv_t == 0 ) THEN
617	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
618	ELSE
619	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
620	ENDIF
621
622	IF ( ibc_pt_b == 0 ) THEN
623	runten = TRIM( runten ) // ' pt(0) = pt_surface'
624	ELSEIF ( ibc_pt_b == 1 ) THEN
625	runten = TRIM( runten ) // ' pt(0) = pt(1)'
626	ELSEIF ( ibc_pt_b == 2 ) THEN
627	runten = TRIM( runten ) // ' pt(0) = from coupled model'
628	ENDIF
629	IF ( ibc_pt_t == 0 ) THEN
630	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
631	ELSEIF( ibc_pt_t == 1 ) THEN
632	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
633	ELSEIF( ibc_pt_t == 2 ) THEN
634	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
635
636	ENDIF
637
638	WRITE ( io, 300 ) runten, roben
639
640	IF ( .NOT. constant_diffusion ) THEN
641	IF ( ibc_e_b == 1 ) THEN
642	runten = 'e(0) = e(1)'
643	ELSE
644	runten = 'e(0) = e(1) = (u/0.1)*2'
645	ENDIF
646	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
647
648	WRITE ( io, 301 ) 'e', runten, roben
649
650	ENDIF
651
652	IF ( ocean ) THEN
653	runten = 'sa(0) = sa(1)'
654	IF ( ibc_sa_t == 0 ) THEN
655	roben = 'sa(nzt+1) = sa_surface'
656	ELSE
657	roben = 'sa(nzt+1) = sa(nzt)'
658	ENDIF
659	WRITE ( io, 301 ) 'sa', runten, roben
660	ENDIF
661
662	IF ( humidity ) THEN
663	IF ( ibc_q_b == 0 ) THEN
664	runten = 'q(0) = q_surface'
665	ELSE
666	runten = 'q(0) = q(1)'
667	ENDIF
668	IF ( ibc_q_t == 0 ) THEN
669	roben = 'q(nzt) = q_top'
670	ELSE
671	roben = 'q(nzt) = q(nzt-1) + dq/dz'
672	ENDIF
673	WRITE ( io, 301 ) 'q', runten, roben
674	ENDIF
675
676	IF ( passive_scalar ) THEN
677	IF ( ibc_q_b == 0 ) THEN
678	runten = 's(0) = s_surface'
679	ELSE
680	runten = 's(0) = s(1)'
681	ENDIF
682	IF ( ibc_q_t == 0 ) THEN
683	roben = 's(nzt) = s_top'
684	ELSE
685	roben = 's(nzt) = s(nzt-1) + ds/dz'
686	ENDIF
687	WRITE ( io, 301 ) 's', runten, roben
688	ENDIF
689
690	IF ( use_surface_fluxes ) THEN
691	WRITE ( io, 303 )
692	IF ( constant_heatflux ) THEN
693	WRITE ( io, 306 ) surface_heatflux
694	IF ( random_heatflux ) WRITE ( io, 307 )
695	ENDIF
696	IF ( humidity .AND. constant_waterflux ) THEN
697	WRITE ( io, 311 ) surface_waterflux
698	ENDIF
699	IF ( passive_scalar .AND. constant_waterflux ) THEN
700	WRITE ( io, 313 ) surface_waterflux
701	ENDIF
702	ENDIF
703
704	IF ( use_top_fluxes ) THEN
705	WRITE ( io, 304 )
706	IF ( coupling_mode == 'uncoupled' ) THEN
707	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
708	IF ( constant_top_heatflux ) THEN
709	WRITE ( io, 306 ) top_heatflux
710	ENDIF
711	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
712	WRITE ( io, 316 )
713	ENDIF
714	IF ( ocean .AND. constant_top_salinityflux ) THEN
715	WRITE ( io, 309 ) top_salinityflux
716	ENDIF
717	IF ( humidity .OR. passive_scalar ) THEN
718	WRITE ( io, 315 )
719	ENDIF
720	ENDIF
721
722	IF ( prandtl_layer ) THEN
723	WRITE ( io, 305 ) (zu(1)-zu(0)), roughness_length, &
724	z0h_factor*roughness_length, kappa, &
725	rif_min, rif_max
726	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
727	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
728	WRITE ( io, 312 )
729	ENDIF
730	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
731	WRITE ( io, 314 )
732	ENDIF
733	ELSE
734	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
735	WRITE ( io, 310 ) rif_min, rif_max
736	ENDIF
737	ENDIF
738
739	WRITE ( io, 317 ) bc_lr, bc_ns
740	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
741	WRITE ( io, 318 ) pt_damping_width, pt_damping_factor
742	IF ( turbulent_inflow ) THEN
743	WRITE ( io, 319 ) recycling_width, recycling_plane, &
744	inflow_damping_height, inflow_damping_width
745	ENDIF
746	ENDIF
747
748	!
749	!-- Listing of 1D-profiles
750	WRITE ( io, 325 ) dt_dopr_listing
751	IF ( averaging_interval_pr /= 0.0 ) THEN
752	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
753	ENDIF
754
755	!
756	!-- DATA output
757	WRITE ( io, 330 )
758	IF ( averaging_interval_pr /= 0.0 ) THEN
759	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
760	ENDIF
761
762	!
763	!-- 1D-profiles
764	dopr_chr = 'Profile:'
765	IF ( dopr_n /= 0 ) THEN
766	WRITE ( io, 331 )
767
768	output_format = ''
769	IF ( netcdf_output ) THEN
770	output_format = output_format_netcdf
771	ENDIF
772	WRITE ( io, 344 ) output_format
773
774	DO i = 1, dopr_n
775	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
776	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
777	WRITE ( io, 332 ) dopr_chr
778	dopr_chr = ' :'
779	ENDIF
780	ENDDO
781
782	IF ( dopr_chr /= '' ) THEN
783	WRITE ( io, 332 ) dopr_chr
784	ENDIF
785	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
786	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
787	ENDIF
788
789	!
790	!-- 2D-arrays
791	DO av = 0, 1
792
793	i = 1
794	do2d_xy = ''
795	do2d_xz = ''
796	do2d_yz = ''
797	DO WHILE ( do2d(av,i) /= ' ' )
798
799	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
800	do2d_mode = do2d(av,i)(l-1:l)
801
802	SELECT CASE ( do2d_mode )
803	CASE ( 'xy' )
804	ll = LEN_TRIM( do2d_xy )
805	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
806	CASE ( 'xz' )
807	ll = LEN_TRIM( do2d_xz )
808	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
809	CASE ( 'yz' )
810	ll = LEN_TRIM( do2d_yz )
811	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
812	END SELECT
813
814	i = i + 1
815
816	ENDDO
817
818	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
819	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
820	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
821	( netcdf_output .OR. iso2d_output ) ) THEN
822
823	IF ( av == 0 ) THEN
824	WRITE ( io, 334 ) ''
825	ELSE
826	WRITE ( io, 334 ) '(time-averaged)'
827	ENDIF
828
829	IF ( do2d_at_begin ) THEN
830	begin_chr = 'and at the start'
831	ELSE
832	begin_chr = ''
833	ENDIF
834
835	output_format = ''
836	IF ( netcdf_output ) THEN
837	output_format = output_format_netcdf
838	ENDIF
839	IF ( iso2d_output ) THEN
840	IF ( netcdf_output ) THEN
841	output_format = TRIM( output_format_netcdf ) // ' and iso2d'
842	ELSE
843	output_format = 'iso2d'
844	ENDIF
845	ENDIF
846	WRITE ( io, 344 ) output_format
847
848	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
849	i = 1
850	slices = '/'
851	coordinates = '/'
852	!
853	!-- Building strings with index and coordinate informations of the
854	!-- slices
855	DO WHILE ( section(i,1) /= -9999 )
856
857	WRITE (section_chr,'(I5)') section(i,1)
858	section_chr = ADJUSTL( section_chr )
859	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
860
861	IF ( section(i,1) == -1 ) THEN
862	WRITE (coor_chr,'(F10.1)') -1.0
863	ELSE
864	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
865	ENDIF
866	coor_chr = ADJUSTL( coor_chr )
867	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
868
869	i = i + 1
870	ENDDO
871	IF ( av == 0 ) THEN
872	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
873	TRIM( begin_chr ), 'k', TRIM( slices ), &
874	TRIM( coordinates )
875	IF ( skip_time_do2d_xy /= 0.0 ) THEN
876	WRITE ( io, 339 ) skip_time_do2d_xy
877	ENDIF
878	ELSE
879	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
880	TRIM( begin_chr ), averaging_interval, &
881	dt_averaging_input, 'k', TRIM( slices ), &
882	TRIM( coordinates )
883	IF ( skip_time_data_output_av /= 0.0 ) THEN
884	WRITE ( io, 339 ) skip_time_data_output_av
885	ENDIF
886	ENDIF
887
888	ENDIF
889
890	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
891	i = 1
892	slices = '/'
893	coordinates = '/'
894	!
895	!-- Building strings with index and coordinate informations of the
896	!-- slices
897	DO WHILE ( section(i,2) /= -9999 )
898
899	WRITE (section_chr,'(I5)') section(i,2)
900	section_chr = ADJUSTL( section_chr )
901	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
902
903	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
904	coor_chr = ADJUSTL( coor_chr )
905	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
906
907	i = i + 1
908	ENDDO
909	IF ( av == 0 ) THEN
910	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
911	TRIM( begin_chr ), 'j', TRIM( slices ), &
912	TRIM( coordinates )
913	IF ( skip_time_do2d_xz /= 0.0 ) THEN
914	WRITE ( io, 339 ) skip_time_do2d_xz
915	ENDIF
916	ELSE
917	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
918	TRIM( begin_chr ), averaging_interval, &
919	dt_averaging_input, 'j', TRIM( slices ), &
920	TRIM( coordinates )
921	IF ( skip_time_data_output_av /= 0.0 ) THEN
922	WRITE ( io, 339 ) skip_time_data_output_av
923	ENDIF
924	ENDIF
925	ENDIF
926
927	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
928	i = 1
929	slices = '/'
930	coordinates = '/'
931	!
932	!-- Building strings with index and coordinate informations of the
933	!-- slices
934	DO WHILE ( section(i,3) /= -9999 )
935
936	WRITE (section_chr,'(I5)') section(i,3)
937	section_chr = ADJUSTL( section_chr )
938	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
939
940	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
941	coor_chr = ADJUSTL( coor_chr )
942	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
943
944	i = i + 1
945	ENDDO
946	IF ( av == 0 ) THEN
947	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
948	TRIM( begin_chr ), 'i', TRIM( slices ), &
949	TRIM( coordinates )
950	IF ( skip_time_do2d_yz /= 0.0 ) THEN
951	WRITE ( io, 339 ) skip_time_do2d_yz
952	ENDIF
953	ELSE
954	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
955	TRIM( begin_chr ), averaging_interval, &
956	dt_averaging_input, 'i', TRIM( slices ), &
957	TRIM( coordinates )
958	IF ( skip_time_data_output_av /= 0.0 ) THEN
959	WRITE ( io, 339 ) skip_time_data_output_av
960	ENDIF
961	ENDIF
962	ENDIF
963
964	ENDIF
965
966	ENDDO
967
968	!
969	!-- 3d-arrays
970	DO av = 0, 1
971
972	i = 1
973	do3d_chr = ''
974	DO WHILE ( do3d(av,i) /= ' ' )
975
976	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
977	i = i + 1
978
979	ENDDO
980
981	IF ( do3d_chr /= '' ) THEN
982	IF ( av == 0 ) THEN
983	WRITE ( io, 336 ) ''
984	ELSE
985	WRITE ( io, 336 ) '(time-averaged)'
986	ENDIF
987
988	output_format = ''
989	IF ( netcdf_output ) THEN
990	output_format = output_format_netcdf
991	ENDIF
992	IF ( avs_output ) THEN
993	IF ( netcdf_output ) THEN
994	output_format = TRIM( output_format_netcdf ) // ' and avs'
995	ELSE
996	output_format = 'avs'
997	ENDIF
998	ENDIF
999	WRITE ( io, 344 ) output_format
1000
1001	IF ( do3d_at_begin ) THEN
1002	begin_chr = 'and at the start'
1003	ELSE
1004	begin_chr = ''
1005	ENDIF
1006	IF ( av == 0 ) THEN
1007	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
1008	zu(nz_do3d), nz_do3d
1009	ELSE
1010	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
1011	TRIM( begin_chr ), averaging_interval, &
1012	dt_averaging_input, zu(nz_do3d), nz_do3d
1013	ENDIF
1014
1015	IF ( do3d_compress ) THEN
1016	do3d_chr = ''
1017	i = 1
1018	DO WHILE ( do3d(av,i) /= ' ' )
1019
1020	SELECT CASE ( do3d(av,i) )
1021	CASE ( 'u' )
1022	j = 1
1023	CASE ( 'v' )
1024	j = 2
1025	CASE ( 'w' )
1026	j = 3
1027	CASE ( 'p' )
1028	j = 4
1029	CASE ( 'pt' )
1030	j = 5
1031	END SELECT
1032	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
1033	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
1034	':' // prec // ','
1035	i = i + 1
1036
1037	ENDDO
1038	WRITE ( io, 338 ) do3d_chr
1039
1040	ENDIF
1041
1042	IF ( av == 0 ) THEN
1043	IF ( skip_time_do3d /= 0.0 ) THEN
1044	WRITE ( io, 339 ) skip_time_do3d
1045	ENDIF
1046	ELSE
1047	IF ( skip_time_data_output_av /= 0.0 ) THEN
1048	WRITE ( io, 339 ) skip_time_data_output_av
1049	ENDIF
1050	ENDIF
1051
1052	ENDIF
1053
1054	ENDDO
1055
1056	!
1057	!-- masked arrays
1058	IF ( masks > 0 ) WRITE ( io, 345 ) &
1059	mask_scale_x, mask_scale_y, mask_scale_z
1060	DO mid = 1, masks
1061	DO av = 0, 1
1062
1063	i = 1
1064	domask_chr = ''
1065	DO WHILE ( domask(mid,av,i) /= ' ' )
1066	domask_chr = TRIM( domask_chr ) // ' ' // &
1067	TRIM( domask(mid,av,i) ) // ','
1068	i = i + 1
1069	ENDDO
1070
1071	IF ( domask_chr /= '' ) THEN
1072	IF ( av == 0 ) THEN
1073	WRITE ( io, 346 ) '', mid
1074	ELSE
1075	WRITE ( io, 346 ) ' (time-averaged)', mid
1076	ENDIF
1077
1078	output_format = ' '
1079	IF ( netcdf_output ) THEN
1080	output_format = output_format_netcdf
1081	ENDIF
1082	WRITE ( io, 344 ) output_format
1083
1084	IF ( av == 0 ) THEN
1085	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
1086	ELSE
1087	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
1088	averaging_interval, dt_averaging_input
1089	ENDIF
1090
1091	IF ( av == 0 ) THEN
1092	IF ( skip_time_domask(mid) /= 0.0 ) THEN
1093	WRITE ( io, 339 ) skip_time_domask(mid)
1094	ENDIF
1095	ELSE
1096	IF ( skip_time_data_output_av /= 0.0 ) THEN
1097	WRITE ( io, 339 ) skip_time_data_output_av
1098	ENDIF
1099	ENDIF
1100	!
1101	!-- output locations
1102	DO dim = 1, 3
1103	IF ( mask(mid,dim,1) >= 0.0 ) THEN
1104	count = 0
1105	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
1106	count = count + 1
1107	ENDDO
1108	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
1109	mask(mid,dim,:count)
1110	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
1111	mask_loop(mid,dim,2) < 0.0 .AND. &
1112	mask_loop(mid,dim,3) == 0.0 ) THEN
1113	WRITE ( io, 350 ) dir(dim), dir(dim)
1114	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
1115	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1116	mask_loop(mid,dim,1:2)
1117	ELSE
1118	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1119	mask_loop(mid,dim,1:3)
1120	ENDIF
1121	ENDDO
1122	ENDIF
1123
1124	ENDDO
1125	ENDDO
1126
1127	!
1128	!-- Timeseries
1129	IF ( dt_dots /= 9999999.9 ) THEN
1130	WRITE ( io, 340 )
1131
1132	output_format = ''
1133	IF ( netcdf_output ) THEN
1134	output_format = output_format_netcdf
1135	ENDIF
1136	WRITE ( io, 344 ) output_format
1137	WRITE ( io, 341 ) dt_dots
1138	ENDIF
1139
1140	#if defined( __dvrp_graphics )
1141	!
1142	!-- Dvrp-output
1143	IF ( dt_dvrp /= 9999999.9 ) THEN
1144	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
1145	TRIM( dvrp_username ), TRIM( dvrp_directory )
1146	i = 1
1147	l = 0
1148	m = 0
1149	DO WHILE ( mode_dvrp(i) /= ' ' )
1150	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
1151	READ ( mode_dvrp(i), '(10X,I2)' ) j
1152	l = l + 1
1153	IF ( do3d(0,j) /= ' ' ) THEN
1154	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
1155	isosurface_color(:,l)
1156	ENDIF
1157	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
1158	READ ( mode_dvrp(i), '(6X,I2)' ) j
1159	m = m + 1
1160	IF ( do2d(0,j) /= ' ' ) THEN
1161	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
1162	slicer_range_limits_dvrp(:,m)
1163	ENDIF
1164	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
1165	WRITE ( io, 363 ) dvrp_psize
1166	IF ( particle_dvrpsize /= 'none' ) THEN
1167	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
1168	dvrpsize_interval
1169	ENDIF
1170	IF ( particle_color /= 'none' ) THEN
1171	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
1172	color_interval
1173	ENDIF
1174	ENDIF
1175	i = i + 1
1176	ENDDO
1177
1178	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
1179	superelevation_y, superelevation, clip_dvrp_l, &
1180	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
1181
1182	IF ( TRIM( topography ) /= 'flat' ) THEN
1183	WRITE ( io, 366 ) topography_color
1184	IF ( cluster_size > 1 ) THEN
1185	WRITE ( io, 367 ) cluster_size
1186	ENDIF
1187	ENDIF
1188
1189	ENDIF
1190	#endif
1191
1192	#if defined( __spectra )
1193	!
1194	!-- Spectra output
1195	IF ( dt_dosp /= 9999999.9 ) THEN
1196	WRITE ( io, 370 )
1197
1198	output_format = ' '
1199	IF ( netcdf_output ) THEN
1200	output_format = output_format_netcdf
1201	ENDIF
1202	WRITE ( io, 344 ) output_format
1203	WRITE ( io, 371 ) dt_dosp
1204	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
1205	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
1206	( spectra_direction(i), i = 1,10 ), &
1207	( comp_spectra_level(i), i = 1,100 ), &
1208	( plot_spectra_level(i), i = 1,100 ), &
1209	averaging_interval_sp, dt_averaging_input_pr
1210	ENDIF
1211	#endif
1212
1213	WRITE ( io, 99 )
1214
1215	!
1216	!-- Physical quantities
1217	WRITE ( io, 400 )
1218
1219	!
1220	!-- Geostrophic parameters
1221	WRITE ( io, 410 ) omega, phi, f, fs
1222
1223	!
1224	!-- Other quantities
1225	WRITE ( io, 411 ) g
1226	IF ( use_reference ) THEN
1227	IF ( ocean ) THEN
1228	WRITE ( io, 412 ) prho_reference
1229	ELSE
1230	WRITE ( io, 413 ) pt_reference
1231	ENDIF
1232	ENDIF
1233
1234	!
1235	!-- Cloud physics parameters
1236	IF ( cloud_physics ) THEN
1237	WRITE ( io, 415 )
1238	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
1239	ENDIF
1240
1241	!-- Profile of the geostrophic wind (component ug)
1242	!-- Building output strings
1243	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
1244	gradients = '------'
1245	slices = ' 0'
1246	coordinates = ' 0.0'
1247	i = 1
1248	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
1249
1250	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
1251	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
1252
1253	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
1254	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1255
1256	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
1257	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1258
1259	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
1260	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1261
1262	IF ( i == 10 ) THEN
1263	EXIT
1264	ELSE
1265	i = i + 1
1266	ENDIF
1267
1268	ENDDO
1269
1270	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
1271	TRIM( gradients ), TRIM( slices )
1272
1273	!-- Profile of the geostrophic wind (component vg)
1274	!-- Building output strings
1275	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
1276	gradients = '------'
1277	slices = ' 0'
1278	coordinates = ' 0.0'
1279	i = 1
1280	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
1281
1282	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
1283	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
1284
1285	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
1286	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1287
1288	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
1289	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1290
1291	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
1292	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1293
1294	IF ( i == 10 ) THEN
1295	EXIT
1296	ELSE
1297	i = i + 1
1298	ENDIF
1299
1300	ENDDO
1301
1302	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
1303	TRIM( gradients ), TRIM( slices )
1304
1305	!
1306	!-- Initial wind profiles
1307	IF ( u_profile(1) /= 9999999.9 ) WRITE ( io, 427 )
1308
1309	!
1310	!-- Initial temperature profile
1311	!-- Building output strings, starting with surface temperature
1312	WRITE ( temperatures, '(F6.2)' ) pt_surface
1313	gradients = '------'
1314	slices = ' 0'
1315	coordinates = ' 0.0'
1316	i = 1
1317	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
1318
1319	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
1320	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1321
1322	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
1323	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1324
1325	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
1326	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1327
1328	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
1329	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1330
1331	IF ( i == 10 ) THEN
1332	EXIT
1333	ELSE
1334	i = i + 1
1335	ENDIF
1336
1337	ENDDO
1338
1339	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
1340	TRIM( gradients ), TRIM( slices )
1341
1342	!
1343	!-- Initial humidity profile
1344	!-- Building output strings, starting with surface humidity
1345	IF ( humidity .OR. passive_scalar ) THEN
1346	WRITE ( temperatures, '(E8.1)' ) q_surface
1347	gradients = '--------'
1348	slices = ' 0'
1349	coordinates = ' 0.0'
1350	i = 1
1351	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
1352
1353	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
1354	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1355
1356	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
1357	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1358
1359	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
1360	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1361
1362	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
1363	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1364
1365	IF ( i == 10 ) THEN
1366	EXIT
1367	ELSE
1368	i = i + 1
1369	ENDIF
1370
1371	ENDDO
1372
1373	IF ( humidity ) THEN
1374	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
1375	TRIM( gradients ), TRIM( slices )
1376	ELSE
1377	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
1378	TRIM( gradients ), TRIM( slices )
1379	ENDIF
1380	ENDIF
1381
1382	!
1383	!-- Initial salinity profile
1384	!-- Building output strings, starting with surface salinity
1385	IF ( ocean ) THEN
1386	WRITE ( temperatures, '(F6.2)' ) sa_surface
1387	gradients = '------'
1388	slices = ' 0'
1389	coordinates = ' 0.0'
1390	i = 1
1391	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
1392
1393	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
1394	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1395
1396	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
1397	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1398
1399	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
1400	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1401
1402	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
1403	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1404
1405	IF ( i == 10 ) THEN
1406	EXIT
1407	ELSE
1408	i = i + 1
1409	ENDIF
1410
1411	ENDDO
1412
1413	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
1414	TRIM( gradients ), TRIM( slices )
1415	ENDIF
1416
1417	!
1418	!-- Profile for the large scale vertial velocity
1419	!-- Building output strings, starting with surface value
1420	IF ( large_scale_subsidence ) THEN
1421	temperatures = ' 0.0'
1422	gradients = '------'
1423	slices = ' 0'
1424	coordinates = ' 0.0'
1425	i = 1
1426	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
1427
1428	WRITE (coor_chr,'(E10.2,7X)') &
1429	w_subs(subs_vertical_gradient_level_i(i))
1430	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1431
1432	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
1433	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1434
1435	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
1436	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1437
1438	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
1439	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1440
1441	IF ( i == 10 ) THEN
1442	EXIT
1443	ELSE
1444	i = i + 1
1445	ENDIF
1446
1447	ENDDO
1448
1449	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
1450	TRIM( gradients ), TRIM( slices )
1451	ENDIF
1452
1453	!
1454	!-- Cloud physcis parameters / quantities / numerical methods
1455	WRITE ( io, 430 )
1456	IF ( humidity .AND. .NOT. cloud_physics .AND. .NOT. cloud_droplets) THEN
1457	WRITE ( io, 431 )
1458	ELSEIF ( humidity .AND. cloud_physics ) THEN
1459	WRITE ( io, 432 )
1460	IF ( radiation ) WRITE ( io, 132 )
1461	IF ( precipitation ) WRITE ( io, 133 )
1462	ELSEIF ( humidity .AND. cloud_droplets ) THEN
1463	WRITE ( io, 433 )
1464	IF ( curvature_solution_effects ) WRITE ( io, 434 )
1465	IF ( collision_kernel /= 'none' ) THEN
1466	WRITE ( io, 435 ) TRIM( collision_kernel )
1467	IF ( collision_kernel(6:9) == 'fast' ) THEN
1468	WRITE ( io, 436 ) radius_classes, dissipation_classes
1469	ENDIF
1470	ELSE
1471	WRITE ( io, 437 )
1472	ENDIF
1473	ENDIF
1474
1475	!
1476	!-- LES / turbulence parameters
1477	WRITE ( io, 450 )
1478
1479	!--
1480	! ... LES-constants used must still be added here
1481	!--
1482	IF ( constant_diffusion ) THEN
1483	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
1484	prandtl_number
1485	ENDIF
1486	IF ( .NOT. constant_diffusion) THEN
1487	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
1488	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
1489	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
1490	ENDIF
1491
1492	!
1493	!-- Special actions during the run
1494	WRITE ( io, 470 )
1495	IF ( create_disturbances ) THEN
1496	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
1497	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
1498	zu(disturbance_level_ind_t), disturbance_level_ind_t
1499	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
1500	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
1501	ELSE
1502	WRITE ( io, 473 ) disturbance_energy_limit
1503	ENDIF
1504	WRITE ( io, 474 ) TRIM( random_generator )
1505	ENDIF
1506	IF ( pt_surface_initial_change /= 0.0 ) THEN
1507	WRITE ( io, 475 ) pt_surface_initial_change
1508	ENDIF
1509	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
1510	WRITE ( io, 476 ) q_surface_initial_change
1511	ENDIF
1512	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
1513	WRITE ( io, 477 ) q_surface_initial_change
1514	ENDIF
1515
1516	IF ( particle_advection ) THEN
1517	!
1518	!-- Particle attributes
1519	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
1520	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
1521	end_time_prel, dt_sort_particles
1522	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
1523	IF ( random_start_position ) WRITE ( io, 481 )
1524	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
1525	WRITE ( io, 495 ) total_number_of_particles
1526	IF ( use_particle_tails .AND. maximum_number_of_tailpoints /= 0 ) THEN
1527	WRITE ( io, 483 ) maximum_number_of_tailpoints
1528	IF ( minimum_tailpoint_distance /= 0 ) THEN
1529	WRITE ( io, 484 ) total_number_of_tails, &
1530	minimum_tailpoint_distance, &
1531	maximum_tailpoint_age
1532	ENDIF
1533	ENDIF
1534	IF ( dt_write_particle_data /= 9999999.9 ) THEN
1535	WRITE ( io, 485 ) dt_write_particle_data
1536	output_format = ' '
1537	IF ( netcdf_output ) THEN
1538	IF ( netcdf_data_format > 1 ) THEN
1539	output_format = 'netcdf (64 bit offset) and binary'
1540	ELSE
1541	output_format = 'netcdf and binary'
1542	ENDIF
1543	ELSE
1544	output_format = 'binary'
1545	ENDIF
1546	WRITE ( io, 344 ) output_format
1547	ENDIF
1548	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
1549	IF ( write_particle_statistics ) WRITE ( io, 486 )
1550
1551	WRITE ( io, 487 ) number_of_particle_groups
1552
1553	DO i = 1, number_of_particle_groups
1554	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
1555	WRITE ( io, 490 ) i, 0.0
1556	WRITE ( io, 492 )
1557	ELSE
1558	WRITE ( io, 490 ) i, radius(i)
1559	IF ( density_ratio(i) /= 0.0 ) THEN
1560	WRITE ( io, 491 ) density_ratio(i)
1561	ELSE
1562	WRITE ( io, 492 )
1563	ENDIF
1564	ENDIF
1565	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
1566	pdx(i), pdy(i), pdz(i)
1567	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
1568	ENDDO
1569
1570	ENDIF
1571
1572
1573	!
1574	!-- Parameters of 1D-model
1575	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1576	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
1577	mixing_length_1d, dissipation_1d
1578	IF ( damp_level_ind_1d /= nzt+1 ) THEN
1579	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
1580	ENDIF
1581	ENDIF
1582
1583	!
1584	!-- User-defined informations
1585	CALL user_header( io )
1586
1587	WRITE ( io, 99 )
1588
1589	!
1590	!-- Write buffer contents to disc immediately
1591	CALL local_flush( io )
1592
1593	!
1594	!-- Here the FORMATs start
1595
1596	99 FORMAT (1X,78('-'))
1597	100 FORMAT (/1X,'******************************',6X,42('-')/ &
1598	1X,'* ',A,' *',6X,A/ &
1599	1X,'******************************',6X,42('-'))
1600	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
1601	37X,42('-'))
1602	102 FORMAT (/' Date: ',A8,6X,'Run: ',A20/ &
1603	' Time: ',A8,6X,'Run-No.: ',I2.2/ &
1604	' Run on host: ',A10)
1605	#if defined( __parallel )
1606	103 FORMAT (' Number of PEs:',10X,I6,6X,'Processor grid (x,y): (',I3,',',I3, &
1607	')',1X,A)
1608	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
1609	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
1610	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
1611	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
1612	37X,'because the job is running on an SMP-cluster')
1613	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
1614	108 FORMAT (37X,'Max. # of parallel I/O streams is ',I5)
1615	109 FORMAT (37X,'Precursor run for coupled atmos-ocean run'/ &
1616	37X,42('-'))
1617	114 FORMAT (37X,'Coupled atmosphere-ocean run following'/ &
1618	37X,'independent precursor runs'/ &
1619	37X,42('-'))
1620	117 FORMAT (' Accelerator boards / node: ',I2)
1621	#endif
1622	110 FORMAT (/' Numerical Schemes:'/ &
1623	' -----------------'/)
1624	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
1625	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
1626	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
1627	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
1628	' or Upstream')
1629	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
1630	' or Upstream')
1631	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
1632	119 FORMAT (' --> Galilei-Transform applied to horizontal advection:'/ &
1633	' translation velocity = ',A/ &
1634	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
1635	120 FORMAT (' Accelerator boards: ',8X,I2)
1636	122 FORMAT (' --> Time differencing scheme: ',A)
1637	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
1638	' maximum damping coefficient: ',F5.3, ' 1/s')
1639	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
1640	130 FORMAT (' --> Additional prognostic equation for the total water content')
1641	131 FORMAT (' --> No pt-equation solved. Neutral stratification with pt = ', &
1642	F6.2, ' K assumed')
1643	132 FORMAT (' Parameterization of long-wave radiation processes via'/ &
1644	' effective emissivity scheme')
1645	133 FORMAT (' Precipitation parameterization via Kessler-Scheme')
1646	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
1647	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
1648	A,'-cycle)'/ &
1649	' number of grid levels: ',I2/ &
1650	' Gauss-Seidel red/black iterations: ',I2)
1651	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1652	I3,')')
1653	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
1654	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1655	I3,')'/ &
1656	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
1657	I3,')')
1658	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
1659	139 FORMAT (' --> Loop optimization method: ',A)
1660	140 FORMAT (' maximum residual allowed: ',E10.3)
1661	141 FORMAT (' fixed number of multigrid cycles: ',I4)
1662	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
1663	'step')
1664	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
1665	'kinetic energy')
1666	144 FORMAT (' masking method is used')
1667	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
1668	'conserved'/ &
1669	' using the ',A,' mode')
1670	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
1671	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
1672	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
1673	/' starting from dp_level_b =', F8.3, 'm', A /)
1674	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
1675	'prognostic equation for')
1676	154 FORMAT (' the potential temperature')
1677	200 FORMAT (//' Run time and time step information:'/ &
1678	' ----------------------------------'/)
1679	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
1680	' CFL-factor: ',F4.2)
1681	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
1682	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
1683	' End time: ',F9.3,' s')
1684	204 FORMAT ( A,F9.3,' s')
1685	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
1686	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
1687	' CPU-time used: ',F9.3,' s per timestep: ', &
1688	' ',F9.3,' s'/ &
1689	' per second of simulated tim', &
1690	'e: ',F9.3,' s')
1691	207 FORMAT ( ' Coupling start time: ',F9.3,' s')
1692	250 FORMAT (//' Computational grid and domain size:'/ &
1693	' ----------------------------------'// &
1694	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
1695	' m dz = ',F7.3,' m'/ &
1696	' Domain size: x = ',F10.3,' m y = ',F10.3, &
1697	' m z(u) = ',F10.3,' m'/)
1698	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
1699	' factor: ',F5.3/ &
1700	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
1701	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
1702	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
1703	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
1704	' degrees')
1705	270 FORMAT (//' Topography informations:'/ &
1706	' -----------------------'// &
1707	1X,'Topography: ',A)
1708	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
1709	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
1710	' / ',I4)
1711	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
1712	' direction' / &
1713	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
1714	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
1715	278 FORMAT (' Topography grid definition convention:'/ &
1716	' cell edge (staggered grid points'/ &
1717	' (u in x-direction, v in y-direction))' /)
1718	279 FORMAT (' Topography grid definition convention:'/ &
1719	' cell center (scalar grid points)' /)
1720	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
1721	' ------------------------------'// &
1722	' Canopy mode: ', A / &
1723	' Canopy top: ',I4 / &
1724	' Leaf drag coefficient: ',F6.2 /)
1725	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
1726	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
1727	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
1728	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
1729	' Height: ',A,' m'/ &
1730	' Leaf area density: ',A,' m2/m3'/ &
1731	' Gradient: ',A,' m2/m4'/ &
1732	' Gridpoint: ',A)
1733
1734	300 FORMAT (//' Boundary conditions:'/ &
1735	' -------------------'// &
1736	' p uv ', &
1737	' pt'// &
1738	' B. bound.: ',A/ &
1739	' T. bound.: ',A)
1740	301 FORMAT (/' ',A// &
1741	' B. bound.: ',A/ &
1742	' T. bound.: ',A)
1743	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
1744	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
1745	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
1746	'computational u,v-level:'// &
1747	' zp = ',F6.2,' m z0 = ',F6.4,' m z0h = ',F7.5,&
1748	' m kappa = ',F4.2/ &
1749	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1750	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
1751	307 FORMAT (' Heatflux has a random normal distribution')
1752	308 FORMAT (' Predefined surface temperature')
1753	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
1754	310 FORMAT (//' 1D-Model:'// &
1755	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1756	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
1757	312 FORMAT (' Predefined surface humidity')
1758	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
1759	314 FORMAT (' Predefined scalar value at the surface')
1760	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
1761	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
1762	'atmosphere model')
1763	317 FORMAT (//' Lateral boundaries:'/ &
1764	' left/right: ',A/ &
1765	' north/south: ',A)
1766	318 FORMAT (/' pt damping layer width = ',F7.2,' m, pt ', &
1767	'damping factor = ',F6.4)
1768	319 FORMAT (' turbulence recycling at inflow switched on'/ &
1769	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
1770	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
1771	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
1772	' v: ',F9.6,' m2/s2')
1773	325 FORMAT (//' List output:'/ &
1774	' -----------'// &
1775	' 1D-Profiles:'/ &
1776	' Output every ',F8.2,' s')
1777	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
1778	' Averaging input every ',F8.2,' s')
1779	330 FORMAT (//' Data output:'/ &
1780	' -----------'/)
1781	331 FORMAT (/' 1D-Profiles:')
1782	332 FORMAT (/' ',A)
1783	333 FORMAT (' Output every ',F8.2,' s',/ &
1784	' Time averaged over ',F8.2,' s'/ &
1785	' Averaging input every ',F8.2,' s')
1786	334 FORMAT (/' 2D-Arrays',A,':')
1787	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1788	' Output every ',F8.2,' s ',A/ &
1789	' Cross sections at ',A1,' = ',A/ &
1790	' scalar-coordinates: ',A,' m'/)
1791	336 FORMAT (/' 3D-Arrays',A,':')
1792	337 FORMAT (/' Arrays: ',A/ &
1793	' Output every ',F8.2,' s ',A/ &
1794	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1795	338 FORMAT (' Compressed data output'/ &
1796	' Decimal precision: ',A/)
1797	339 FORMAT (' No output during initial ',F8.2,' s')
1798	340 FORMAT (/' Time series:')
1799	341 FORMAT (' Output every ',F8.2,' s'/)
1800	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1801	' Output every ',F8.2,' s ',A/ &
1802	' Time averaged over ',F8.2,' s'/ &
1803	' Averaging input every ',F8.2,' s'/ &
1804	' Cross sections at ',A1,' = ',A/ &
1805	' scalar-coordinates: ',A,' m'/)
1806	343 FORMAT (/' Arrays: ',A/ &
1807	' Output every ',F8.2,' s ',A/ &
1808	' Time averaged over ',F8.2,' s'/ &
1809	' Averaging input every ',F8.2,' s'/ &
1810	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1811	344 FORMAT (' Output format: ',A/)
1812	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
1813	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
1814	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
1815	' mask_scale_z (in z-direction): ',F9.3, ' m' )
1816	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
1817	347 FORMAT (' Variables: ',A/ &
1818	' Output every ',F8.2,' s')
1819	348 FORMAT (' Variables: ',A/ &
1820	' Output every ',F8.2,' s'/ &
1821	' Time averaged over ',F8.2,' s'/ &
1822	' Averaging input every ',F8.2,' s')
1823	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1824	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
1825	13(' ',8(F8.2,',')/) )
1826	350 FORMAT (/' Output locations in ',A,'-direction: ', &
1827	'all gridpoints along ',A,'-direction (default).' )
1828	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1829	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
1830	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
1831	#if defined( __dvrp_graphics )
1832	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
1833	' Output every ',F7.1,' s'/ &
1834	' Output mode: ',A/ &
1835	' Host / User: ',A,' / ',A/ &
1836	' Directory: ',A// &
1837	' The sequence contains:')
1838	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
1839	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1840	362 FORMAT (/' Slicer plane ',A/ &
1841	' Slicer limits: [',F6.2,',',F6.2,']')
1842	363 FORMAT (/' Particles'/ &
1843	' particle size: ',F7.2,' m')
1844	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
1845	F6.2,',',F6.2,']')
1846	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
1847	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
1848	')'/ &
1849	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
1850	' from y = ',F9.1,' m to y = ',F9.1,' m')
1851	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1852	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
1853	#endif
1854	#if defined( __spectra )
1855	370 FORMAT (' Spectra:')
1856	371 FORMAT (' Output every ',F7.1,' s'/)
1857	372 FORMAT (' Arrays: ', 10(A5,',')/ &
1858	' Directions: ', 10(A5,',')/ &
1859	' height levels k = ', 20(I3,',')/ &
1860	' ', 20(I3,',')/ &
1861	' ', 20(I3,',')/ &
1862	' ', 20(I3,',')/ &
1863	' ', 19(I3,','),I3,'.'/ &
1864	' height levels selected for standard plot:'/ &
1865	' k = ', 20(I3,',')/ &
1866	' ', 20(I3,',')/ &
1867	' ', 20(I3,',')/ &
1868	' ', 20(I3,',')/ &
1869	' ', 19(I3,','),I3,'.'/ &
1870	' Time averaged over ', F7.1, ' s,' / &
1871	' Profiles for the time averaging are taken every ', &
1872	F6.1,' s')
1873	#endif
1874	400 FORMAT (//' Physical quantities:'/ &
1875	' -------------------'/)
1876	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
1877	' Geograph. latitude : phi = ',F4.1,' degr'/ &
1878	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
1879	' f* = ',F9.6,' 1/s')
1880	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
1881	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
1882	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
1883	415 FORMAT (/' Cloud physics parameters:'/ &
1884	' ------------------------'/)
1885	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
1886	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
1887	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
1888	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
1889	' Vapourization heat : L_v = ',E8.2,' J/kg')
1890	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
1891	' Height: ',A,' m'/ &
1892	' Temperature: ',A,' K'/ &
1893	' Gradient: ',A,' K/100m'/ &
1894	' Gridpoint: ',A)
1895	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
1896	' Height: ',A,' m'/ &
1897	' Humidity: ',A,' kg/kg'/ &
1898	' Gradient: ',A,' (kg/kg)/100m'/ &
1899	' Gridpoint: ',A)
1900	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
1901	' Height: ',A,' m'/ &
1902	' Scalar concentration: ',A,' kg/m**3'/ &
1903	' Gradient: ',A,' (kg/m**3)/100m'/ &
1904	' Gridpoint: ',A)
1905	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
1906	' Height: ',A,' m'/ &
1907	' ug: ',A,' m/s'/ &
1908	' Gradient: ',A,' 1/100s'/ &
1909	' Gridpoint: ',A)
1910	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
1911	' Height: ',A,' m'/ &
1912	' vg: ',A,' m/s'/ &
1913	' Gradient: ',A,' 1/100s'/ &
1914	' Gridpoint: ',A)
1915	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
1916	' Height: ',A,' m'/ &
1917	' Salinity: ',A,' psu'/ &
1918	' Gradient: ',A,' psu/100m'/ &
1919	' Gridpoint: ',A)
1920	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
1921	' Height: ',A,' m'/ &
1922	' w_subs: ',A,' m/s'/ &
1923	' Gradient: ',A,' (m/s)/100m'/ &
1924	' Gridpoint: ',A)
1925	427 FORMAT (/' Initial wind profiles (u,v) are interpolated from given'// &
1926	' profiles')
1927	430 FORMAT (//' Cloud physics quantities / methods:'/ &
1928	' ----------------------------------'/)
1929	431 FORMAT (' Humidity is treated as purely passive scalar (no condensati', &
1930	'on)')
1931	432 FORMAT (' Bulk scheme with liquid water potential temperature and'/ &
1932	' total water content is used.'/ &
1933	' Condensation is parameterized via 0% - or 100% scheme.')
1934	433 FORMAT (' Cloud droplets treated explicitly using the Lagrangian part', &
1935	'icle model')
1936	434 FORMAT (' Curvature and solution effecs are considered for growth of', &
1937	' droplets < 1.0E-6 m')
1938	435 FORMAT (' Droplet collision is handled by ',A,'-kernel')
1939	436 FORMAT (' Fast kernel with fixed radius- and dissipation classes ', &
1940	'are used'/ &
1941	' number of radius classes: ',I3,' interval ', &
1942	'[1.0E-6,2.0E-4] m'/ &
1943	' number of dissipation classes: ',I2,' interval ', &
1944	'[0,1000] cm2/s3')
1945	437 FORMAT (' Droplet collision is switched off')
1946	450 FORMAT (//' LES / Turbulence quantities:'/ &
1947	' ---------------------------'/)
1948	451 FORMAT (' Diffusion coefficients are constant:'/ &
1949	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
1950	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
1951	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
1952	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
1953	470 FORMAT (//' Actions during the simulation:'/ &
1954	' -----------------------------'/)
1955	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
1956	' Disturbance amplitude : ',F4.2, ' m/s'/ &
1957	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
1958	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
1959	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
1960	' to i/j =',I4)
1961	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
1962	1X,F5.3, ' m2/s2')
1963	474 FORMAT (' Random number generator used : ',A/)
1964	475 FORMAT (' The surface temperature is increased (or decreased, ', &
1965	'respectively, if'/ &
1966	' the value is negative) by ',F5.2,' K at the beginning of the',&
1967	' 3D-simulation'/)
1968	476 FORMAT (' The surface humidity is increased (or decreased, ',&
1969	'respectively, if the'/ &
1970	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
1971	' the 3D-simulation'/)
1972	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
1973	'respectively, if the'/ &
1974	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
1975	' the 3D-simulation'/)
1976	480 FORMAT (' Particles:'/ &
1977	' ---------'// &
1978	' Particle advection is active (switched on at t = ', F7.1, &
1979	' s)'/ &
1980	' Start of new particle generations every ',F6.1,' s'/ &
1981	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
1982	' bottom: ', A, ' top: ', A/&
1983	' Maximum particle age: ',F9.1,' s'/ &
1984	' Advection stopped at t = ',F9.1,' s'/ &
1985	' Particles are sorted every ',F9.1,' s'/)
1986	481 FORMAT (' Particles have random start positions'/)
1987	482 FORMAT (' Particles are advected only horizontally'/)
1988	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
1989	484 FORMAT (' Number of tails of the total domain: ',I10/ &
1990	' Minimum distance between tailpoints: ',F8.2,' m'/ &
1991	' Maximum age of the end of the tail: ',F8.2,' s')
1992	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
1993	486 FORMAT (' Particle statistics are written on file'/)
1994	487 FORMAT (' Number of particle groups: ',I2/)
1995	488 FORMAT (' SGS velocity components are used for particle advection'/ &
1996	' minimum timestep for advection: ', F7.5/)
1997	489 FORMAT (' Number of particles simultaneously released at each ', &
1998	'point: ', I5/)
1999	490 FORMAT (' Particle group ',I2,':'/ &
2000	' Particle radius: ',E10.3, 'm')
2001	491 FORMAT (' Particle inertia is activated'/ &
2002	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
2003	492 FORMAT (' Particles are advected only passively (no inertia)'/)
2004	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
2005	' y:',F8.1,' - ',F8.1,' m'/&
2006	' z:',F8.1,' - ',F8.1,' m'/&
2007	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
2008	' m dz = ',F8.1,' m'/)
2009	494 FORMAT (' Output of particle time series in NetCDF format every ', &
2010	F8.2,' s'/)
2011	495 FORMAT (' Number of particles in total domain: ',I10/)
2012	500 FORMAT (//' 1D-Model parameters:'/ &
2013	' -------------------'// &
2014	' Simulation time: ',F8.1,' s'/ &
2015	' Run-controll output every: ',F8.1,' s'/ &
2016	' Vertical profile output every: ',F8.1,' s'/ &
2017	' Mixing length calculation: ',A/ &
2018	' Dissipation calculation: ',A/)
2019	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
2020	503 FORMAT (' --> Momentum advection via Wicker-Skamarock-Scheme 5th order')
2021	504 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order')
2022
2023
2024	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |